1 // SPDX-License-Identifier: GPL-2.0 2 /* Copyright(c) 2009-2012 Realtek Corporation.*/ 3 4 #include "../wifi.h" 5 #include "../efuse.h" 6 #include "../base.h" 7 #include "../regd.h" 8 #include "../cam.h" 9 #include "../ps.h" 10 #include "../pci.h" 11 #include "../rtl8192d/reg.h" 12 #include "../rtl8192d/def.h" 13 #include "../rtl8192d/dm_common.h" 14 #include "../rtl8192d/fw_common.h" 15 #include "../rtl8192d/hw_common.h" 16 #include "../rtl8192d/phy_common.h" 17 #include "phy.h" 18 #include "dm.h" 19 #include "fw.h" 20 #include "led.h" 21 #include "sw.h" 22 #include "hw.h" 23 24 u32 rtl92de_read_dword_dbi(struct ieee80211_hw *hw, u16 offset, u8 direct) 25 { 26 struct rtl_priv *rtlpriv = rtl_priv(hw); 27 u32 value; 28 29 rtl_write_word(rtlpriv, REG_DBI_CTRL, (offset & 0xFFC)); 30 rtl_write_byte(rtlpriv, REG_DBI_FLAG, BIT(1) | direct); 31 udelay(10); 32 value = rtl_read_dword(rtlpriv, REG_DBI_RDATA); 33 return value; 34 } 35 36 void rtl92de_write_dword_dbi(struct ieee80211_hw *hw, 37 u16 offset, u32 value, u8 direct) 38 { 39 struct rtl_priv *rtlpriv = rtl_priv(hw); 40 41 rtl_write_word(rtlpriv, REG_DBI_CTRL, ((offset & 0xFFC) | 0xF000)); 42 rtl_write_dword(rtlpriv, REG_DBI_WDATA, value); 43 rtl_write_byte(rtlpriv, REG_DBI_FLAG, BIT(0) | direct); 44 } 45 46 static void _rtl92de_set_bcn_ctrl_reg(struct ieee80211_hw *hw, 47 u8 set_bits, u8 clear_bits) 48 { 49 struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw)); 50 struct rtl_priv *rtlpriv = rtl_priv(hw); 51 52 rtlpci->reg_bcn_ctrl_val |= set_bits; 53 rtlpci->reg_bcn_ctrl_val &= ~clear_bits; 54 rtl_write_byte(rtlpriv, REG_BCN_CTRL, (u8) rtlpci->reg_bcn_ctrl_val); 55 } 56 57 static void _rtl92de_enable_bcn_sub_func(struct ieee80211_hw *hw) 58 { 59 _rtl92de_set_bcn_ctrl_reg(hw, 0, BIT(1)); 60 } 61 62 static void _rtl92de_disable_bcn_sub_func(struct ieee80211_hw *hw) 63 { 64 _rtl92de_set_bcn_ctrl_reg(hw, BIT(1), 0); 65 } 66 67 void rtl92de_get_hw_reg(struct ieee80211_hw *hw, u8 variable, u8 *val) 68 { 69 struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw)); 70 71 switch (variable) { 72 case HW_VAR_RCR: 73 *((u32 *) (val)) = rtlpci->receive_config; 74 break; 75 default: 76 rtl92d_get_hw_reg(hw, variable, val); 77 break; 78 } 79 } 80 81 void rtl92de_set_hw_reg(struct ieee80211_hw *hw, u8 variable, u8 *val) 82 { 83 struct rtl_priv *rtlpriv = rtl_priv(hw); 84 struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw)); 85 struct rtl_mac *mac = rtl_mac(rtl_priv(hw)); 86 87 switch (variable) { 88 case HW_VAR_AC_PARAM: { 89 u8 e_aci = *val; 90 rtl92d_dm_init_edca_turbo(hw); 91 if (rtlpci->acm_method != EACMWAY2_SW) 92 rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_ACM_CTRL, 93 &e_aci); 94 break; 95 } 96 case HW_VAR_ACM_CTRL: { 97 u8 e_aci = *val; 98 union aci_aifsn *p_aci_aifsn = 99 (union aci_aifsn *)(&(mac->ac[0].aifs)); 100 u8 acm = p_aci_aifsn->f.acm; 101 u8 acm_ctrl = rtl_read_byte(rtlpriv, REG_ACMHWCTRL); 102 103 acm_ctrl = acm_ctrl | ((rtlpci->acm_method == 2) ? 0x0 : 0x1); 104 if (acm) { 105 switch (e_aci) { 106 case AC0_BE: 107 acm_ctrl |= ACMHW_BEQEN; 108 break; 109 case AC2_VI: 110 acm_ctrl |= ACMHW_VIQEN; 111 break; 112 case AC3_VO: 113 acm_ctrl |= ACMHW_VOQEN; 114 break; 115 default: 116 rtl_dbg(rtlpriv, COMP_ERR, DBG_WARNING, 117 "HW_VAR_ACM_CTRL acm set failed: eACI is %d\n", 118 acm); 119 break; 120 } 121 } else { 122 switch (e_aci) { 123 case AC0_BE: 124 acm_ctrl &= (~ACMHW_BEQEN); 125 break; 126 case AC2_VI: 127 acm_ctrl &= (~ACMHW_VIQEN); 128 break; 129 case AC3_VO: 130 acm_ctrl &= (~ACMHW_VOQEN); 131 break; 132 default: 133 pr_err("switch case %#x not processed\n", 134 e_aci); 135 break; 136 } 137 } 138 rtl_dbg(rtlpriv, COMP_QOS, DBG_TRACE, 139 "SetHwReg8190pci(): [HW_VAR_ACM_CTRL] Write 0x%X\n", 140 acm_ctrl); 141 rtl_write_byte(rtlpriv, REG_ACMHWCTRL, acm_ctrl); 142 break; 143 } 144 case HW_VAR_RCR: 145 rtl_write_dword(rtlpriv, REG_RCR, ((u32 *) (val))[0]); 146 rtlpci->receive_config = ((u32 *) (val))[0]; 147 break; 148 case HW_VAR_H2C_FW_JOINBSSRPT: { 149 u8 mstatus = (*val); 150 u8 tmp_regcr, tmp_reg422; 151 bool recover = false; 152 153 if (mstatus == RT_MEDIA_CONNECT) { 154 rtlpriv->cfg->ops->set_hw_reg(hw, 155 HW_VAR_AID, NULL); 156 tmp_regcr = rtl_read_byte(rtlpriv, REG_CR + 1); 157 rtl_write_byte(rtlpriv, REG_CR + 1, 158 (tmp_regcr | BIT(0))); 159 _rtl92de_set_bcn_ctrl_reg(hw, 0, BIT(3)); 160 _rtl92de_set_bcn_ctrl_reg(hw, BIT(4), 0); 161 tmp_reg422 = rtl_read_byte(rtlpriv, 162 REG_FWHW_TXQ_CTRL + 2); 163 if (tmp_reg422 & BIT(6)) 164 recover = true; 165 rtl_write_byte(rtlpriv, REG_FWHW_TXQ_CTRL + 2, 166 tmp_reg422 & (~BIT(6))); 167 rtl92d_set_fw_rsvdpagepkt(hw, 0); 168 _rtl92de_set_bcn_ctrl_reg(hw, BIT(3), 0); 169 _rtl92de_set_bcn_ctrl_reg(hw, 0, BIT(4)); 170 if (recover) 171 rtl_write_byte(rtlpriv, 172 REG_FWHW_TXQ_CTRL + 2, 173 tmp_reg422); 174 rtl_write_byte(rtlpriv, REG_CR + 1, 175 (tmp_regcr & ~(BIT(0)))); 176 } 177 rtl92d_set_fw_joinbss_report_cmd(hw, (*val)); 178 break; 179 } 180 case HW_VAR_CORRECT_TSF: { 181 u8 btype_ibss = val[0]; 182 183 if (btype_ibss) 184 rtl92d_stop_tx_beacon(hw); 185 _rtl92de_set_bcn_ctrl_reg(hw, 0, BIT(3)); 186 rtl_write_dword(rtlpriv, REG_TSFTR, 187 (u32) (mac->tsf & 0xffffffff)); 188 rtl_write_dword(rtlpriv, REG_TSFTR + 4, 189 (u32) ((mac->tsf >> 32) & 0xffffffff)); 190 _rtl92de_set_bcn_ctrl_reg(hw, BIT(3), 0); 191 if (btype_ibss) 192 rtl92d_resume_tx_beacon(hw); 193 194 break; 195 } 196 case HW_VAR_INT_MIGRATION: { 197 bool int_migration = *(bool *) (val); 198 199 if (int_migration) { 200 /* Set interrupt migration timer and 201 * corresponding Tx/Rx counter. 202 * timer 25ns*0xfa0=100us for 0xf packets. 203 * 0x306:Rx, 0x307:Tx */ 204 rtl_write_dword(rtlpriv, REG_INT_MIG, 0xfe000fa0); 205 rtlpriv->dm.interrupt_migration = int_migration; 206 } else { 207 /* Reset all interrupt migration settings. */ 208 rtl_write_dword(rtlpriv, REG_INT_MIG, 0); 209 rtlpriv->dm.interrupt_migration = int_migration; 210 } 211 break; 212 } 213 case HW_VAR_INT_AC: { 214 bool disable_ac_int = *((bool *) val); 215 216 /* Disable four ACs interrupts. */ 217 if (disable_ac_int) { 218 /* Disable VO, VI, BE and BK four AC interrupts 219 * to gain more efficient CPU utilization. 220 * When extremely highly Rx OK occurs, 221 * we will disable Tx interrupts. 222 */ 223 rtlpriv->cfg->ops->update_interrupt_mask(hw, 0, 224 RT_AC_INT_MASKS); 225 rtlpriv->dm.disable_tx_int = disable_ac_int; 226 /* Enable four ACs interrupts. */ 227 } else { 228 rtlpriv->cfg->ops->update_interrupt_mask(hw, 229 RT_AC_INT_MASKS, 0); 230 rtlpriv->dm.disable_tx_int = disable_ac_int; 231 } 232 break; 233 } 234 default: 235 rtl92d_set_hw_reg(hw, variable, val); 236 break; 237 } 238 } 239 240 static bool _rtl92de_llt_table_init(struct ieee80211_hw *hw) 241 { 242 struct rtl_priv *rtlpriv = rtl_priv(hw); 243 unsigned short i; 244 u8 txpktbuf_bndy; 245 u8 maxpage; 246 bool status; 247 u32 value32; /* High+low page number */ 248 u8 value8; /* normal page number */ 249 250 if (rtlpriv->rtlhal.macphymode == SINGLEMAC_SINGLEPHY) { 251 maxpage = 255; 252 txpktbuf_bndy = 246; 253 value8 = 0; 254 value32 = 0x80bf0d29; 255 } else { 256 maxpage = 127; 257 txpktbuf_bndy = 123; 258 value8 = 0; 259 value32 = 0x80750005; 260 } 261 262 /* Set reserved page for each queue */ 263 /* 11. RQPN 0x200[31:0] = 0x80BD1C1C */ 264 /* load RQPN */ 265 rtl_write_byte(rtlpriv, REG_RQPN_NPQ, value8); 266 rtl_write_dword(rtlpriv, REG_RQPN, value32); 267 268 /* 12. TXRKTBUG_PG_BNDY 0x114[31:0] = 0x27FF00F6 */ 269 /* TXRKTBUG_PG_BNDY */ 270 rtl_write_dword(rtlpriv, REG_TRXFF_BNDY, 271 (rtl_read_word(rtlpriv, REG_TRXFF_BNDY + 2) << 16 | 272 txpktbuf_bndy)); 273 274 /* 13. TDECTRL[15:8] 0x209[7:0] = 0xF6 */ 275 /* Beacon Head for TXDMA */ 276 rtl_write_byte(rtlpriv, REG_TDECTRL + 1, txpktbuf_bndy); 277 278 /* 14. BCNQ_PGBNDY 0x424[7:0] = 0xF6 */ 279 /* BCNQ_PGBNDY */ 280 rtl_write_byte(rtlpriv, REG_TXPKTBUF_BCNQ_BDNY, txpktbuf_bndy); 281 rtl_write_byte(rtlpriv, REG_TXPKTBUF_MGQ_BDNY, txpktbuf_bndy); 282 283 /* 15. WMAC_LBK_BF_HD 0x45D[7:0] = 0xF6 */ 284 /* WMAC_LBK_BF_HD */ 285 rtl_write_byte(rtlpriv, 0x45D, txpktbuf_bndy); 286 287 /* Set Tx/Rx page size (Tx must be 128 Bytes, */ 288 /* Rx can be 64,128,256,512,1024 bytes) */ 289 /* 16. PBP [7:0] = 0x11 */ 290 /* TRX page size */ 291 rtl_write_byte(rtlpriv, REG_PBP, 0x11); 292 293 /* 17. DRV_INFO_SZ = 0x04 */ 294 rtl_write_byte(rtlpriv, REG_RX_DRVINFO_SZ, 0x4); 295 296 /* 18. LLT_table_init(Adapter); */ 297 for (i = 0; i < (txpktbuf_bndy - 1); i++) { 298 status = rtl92d_llt_write(hw, i, i + 1); 299 if (!status) 300 return status; 301 } 302 303 /* end of list */ 304 status = rtl92d_llt_write(hw, (txpktbuf_bndy - 1), 0xFF); 305 if (!status) 306 return status; 307 308 /* Make the other pages as ring buffer */ 309 /* This ring buffer is used as beacon buffer if we */ 310 /* config this MAC as two MAC transfer. */ 311 /* Otherwise used as local loopback buffer. */ 312 for (i = txpktbuf_bndy; i < maxpage; i++) { 313 status = rtl92d_llt_write(hw, i, (i + 1)); 314 if (!status) 315 return status; 316 } 317 318 /* Let last entry point to the start entry of ring buffer */ 319 status = rtl92d_llt_write(hw, maxpage, txpktbuf_bndy); 320 if (!status) 321 return status; 322 323 return true; 324 } 325 326 static void _rtl92de_gen_refresh_led_state(struct ieee80211_hw *hw) 327 { 328 struct rtl_priv *rtlpriv = rtl_priv(hw); 329 struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw)); 330 struct rtl_ps_ctl *ppsc = rtl_psc(rtl_priv(hw)); 331 enum rtl_led_pin pin0 = rtlpriv->ledctl.sw_led0; 332 333 if (rtlpci->up_first_time) 334 return; 335 if (ppsc->rfoff_reason == RF_CHANGE_BY_IPS) 336 rtl92de_sw_led_on(hw, pin0); 337 else if (ppsc->rfoff_reason == RF_CHANGE_BY_INIT) 338 rtl92de_sw_led_on(hw, pin0); 339 else 340 rtl92de_sw_led_off(hw, pin0); 341 } 342 343 static bool _rtl92de_init_mac(struct ieee80211_hw *hw) 344 { 345 struct rtl_priv *rtlpriv = rtl_priv(hw); 346 struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw)); 347 unsigned char bytetmp; 348 unsigned short wordtmp; 349 u16 retry; 350 351 rtl92d_phy_set_poweron(hw); 352 /* Add for resume sequence of power domain according 353 * to power document V11. Chapter V.11.... */ 354 /* 0. RSV_CTRL 0x1C[7:0] = 0x00 */ 355 /* unlock ISO/CLK/Power control register */ 356 rtl_write_byte(rtlpriv, REG_RSV_CTRL, 0x00); 357 rtl_write_byte(rtlpriv, REG_LDOA15_CTRL, 0x05); 358 359 /* 1. AFE_XTAL_CTRL [7:0] = 0x0F enable XTAL */ 360 /* 2. SPS0_CTRL 0x11[7:0] = 0x2b enable SPS into PWM mode */ 361 /* 3. delay (1ms) this is not necessary when initially power on */ 362 363 /* C. Resume Sequence */ 364 /* a. SPS0_CTRL 0x11[7:0] = 0x2b */ 365 rtl_write_byte(rtlpriv, REG_SPS0_CTRL, 0x2b); 366 367 /* b. AFE_XTAL_CTRL [7:0] = 0x0F */ 368 rtl_write_byte(rtlpriv, REG_AFE_XTAL_CTRL, 0x0F); 369 370 /* c. DRV runs power on init flow */ 371 372 /* auto enable WLAN */ 373 /* 4. APS_FSMCO 0x04[8] = 1; wait till 0x04[8] = 0 */ 374 /* Power On Reset for MAC Block */ 375 bytetmp = rtl_read_byte(rtlpriv, REG_APS_FSMCO + 1) | BIT(0); 376 udelay(2); 377 rtl_write_byte(rtlpriv, REG_APS_FSMCO + 1, bytetmp); 378 udelay(2); 379 380 /* 5. Wait while 0x04[8] == 0 goto 2, otherwise goto 1 */ 381 bytetmp = rtl_read_byte(rtlpriv, REG_APS_FSMCO + 1); 382 udelay(50); 383 retry = 0; 384 while ((bytetmp & BIT(0)) && retry < 1000) { 385 retry++; 386 bytetmp = rtl_read_byte(rtlpriv, REG_APS_FSMCO + 1); 387 udelay(50); 388 } 389 390 /* Enable Radio off, GPIO, and LED function */ 391 /* 6. APS_FSMCO 0x04[15:0] = 0x0012 when enable HWPDN */ 392 rtl_write_word(rtlpriv, REG_APS_FSMCO, 0x1012); 393 394 /* release RF digital isolation */ 395 /* 7. SYS_ISO_CTRL 0x01[1] = 0x0; */ 396 /*Set REG_SYS_ISO_CTRL 0x1=0x82 to prevent wake# problem. */ 397 rtl_write_byte(rtlpriv, REG_SYS_ISO_CTRL + 1, 0x82); 398 udelay(2); 399 400 /* make sure that BB reset OK. */ 401 /* rtl_write_byte(rtlpriv, REG_SYS_FUNC_EN, 0xE3); */ 402 403 /* Disable REG_CR before enable it to assure reset */ 404 rtl_write_word(rtlpriv, REG_CR, 0x0); 405 406 /* Release MAC IO register reset */ 407 rtl_write_word(rtlpriv, REG_CR, 0x2ff); 408 409 /* clear stopping tx/rx dma */ 410 rtl_write_byte(rtlpriv, REG_PCIE_CTRL_REG + 1, 0x0); 411 412 /* rtl_write_word(rtlpriv,REG_CR+2, 0x2); */ 413 414 /* System init */ 415 /* 18. LLT_table_init(Adapter); */ 416 if (!_rtl92de_llt_table_init(hw)) 417 return false; 418 419 /* Clear interrupt and enable interrupt */ 420 /* 19. HISR 0x124[31:0] = 0xffffffff; */ 421 /* HISRE 0x12C[7:0] = 0xFF */ 422 rtl_write_dword(rtlpriv, REG_HISR, 0xffffffff); 423 rtl_write_byte(rtlpriv, REG_HISRE, 0xff); 424 425 /* 20. HIMR 0x120[31:0] |= [enable INT mask bit map]; */ 426 /* 21. HIMRE 0x128[7:0] = [enable INT mask bit map] */ 427 /* The IMR should be enabled later after all init sequence 428 * is finished. */ 429 430 /* 22. PCIE configuration space configuration */ 431 /* 23. Ensure PCIe Device 0x80[15:0] = 0x0143 (ASPM+CLKREQ), */ 432 /* and PCIe gated clock function is enabled. */ 433 /* PCIE configuration space will be written after 434 * all init sequence.(Or by BIOS) */ 435 436 rtl92d_phy_config_maccoexist_rfpage(hw); 437 438 /* THe below section is not related to power document Vxx . */ 439 /* This is only useful for driver and OS setting. */ 440 /* -------------------Software Relative Setting---------------------- */ 441 wordtmp = rtl_read_word(rtlpriv, REG_TRXDMA_CTRL); 442 wordtmp &= 0xf; 443 wordtmp |= 0xF771; 444 rtl_write_word(rtlpriv, REG_TRXDMA_CTRL, wordtmp); 445 446 /* Reported Tx status from HW for rate adaptive. */ 447 /* This should be realtive to power on step 14. But in document V11 */ 448 /* still not contain the description.!!! */ 449 rtl_write_byte(rtlpriv, REG_FWHW_TXQ_CTRL + 1, 0x1F); 450 451 /* Set Tx/Rx page size (Tx must be 128 Bytes, 452 * Rx can be 64,128,256,512,1024 bytes) */ 453 /* rtl_write_byte(rtlpriv,REG_PBP, 0x11); */ 454 455 /* Set RCR register */ 456 rtl_write_dword(rtlpriv, REG_RCR, rtlpci->receive_config); 457 /* rtl_write_byte(rtlpriv,REG_RX_DRVINFO_SZ, 4); */ 458 459 /* Set TCR register */ 460 rtl_write_dword(rtlpriv, REG_TCR, rtlpci->transmit_config); 461 462 /* disable earlymode */ 463 rtl_write_byte(rtlpriv, 0x4d0, 0x0); 464 465 /* Set TX/RX descriptor physical address(from OS API). */ 466 rtl_write_dword(rtlpriv, REG_BCNQ_DESA, 467 rtlpci->tx_ring[BEACON_QUEUE].dma); 468 rtl_write_dword(rtlpriv, REG_MGQ_DESA, rtlpci->tx_ring[MGNT_QUEUE].dma); 469 rtl_write_dword(rtlpriv, REG_VOQ_DESA, rtlpci->tx_ring[VO_QUEUE].dma); 470 rtl_write_dword(rtlpriv, REG_VIQ_DESA, rtlpci->tx_ring[VI_QUEUE].dma); 471 rtl_write_dword(rtlpriv, REG_BEQ_DESA, rtlpci->tx_ring[BE_QUEUE].dma); 472 rtl_write_dword(rtlpriv, REG_BKQ_DESA, rtlpci->tx_ring[BK_QUEUE].dma); 473 rtl_write_dword(rtlpriv, REG_HQ_DESA, rtlpci->tx_ring[HIGH_QUEUE].dma); 474 /* Set RX Desc Address */ 475 rtl_write_dword(rtlpriv, REG_RX_DESA, 476 rtlpci->rx_ring[RX_MPDU_QUEUE].dma); 477 478 /* if we want to support 64 bit DMA, we should set it here, 479 * but now we do not support 64 bit DMA*/ 480 481 rtl_write_byte(rtlpriv, REG_PCIE_CTRL_REG + 3, 0x33); 482 483 /* Reset interrupt migration setting when initialization */ 484 rtl_write_dword(rtlpriv, REG_INT_MIG, 0); 485 486 /* Reconsider when to do this operation after asking HWSD. */ 487 bytetmp = rtl_read_byte(rtlpriv, REG_APSD_CTRL); 488 rtl_write_byte(rtlpriv, REG_APSD_CTRL, bytetmp & ~BIT(6)); 489 do { 490 retry++; 491 bytetmp = rtl_read_byte(rtlpriv, REG_APSD_CTRL); 492 } while ((retry < 200) && !(bytetmp & BIT(7))); 493 494 /* After MACIO reset,we must refresh LED state. */ 495 _rtl92de_gen_refresh_led_state(hw); 496 497 /* Reset H2C protection register */ 498 rtl_write_dword(rtlpriv, REG_MCUTST_1, 0x0); 499 500 return true; 501 } 502 503 static void _rtl92de_hw_configure(struct ieee80211_hw *hw) 504 { 505 struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw)); 506 struct rtl_priv *rtlpriv = rtl_priv(hw); 507 struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw)); 508 u8 reg_bw_opmode = BW_OPMODE_20MHZ; 509 u32 reg_rrsr; 510 511 reg_rrsr = RATE_ALL_CCK | RATE_ALL_OFDM_AG; 512 rtl_write_byte(rtlpriv, REG_INIRTS_RATE_SEL, 0x8); 513 rtl_write_byte(rtlpriv, REG_BWOPMODE, reg_bw_opmode); 514 rtl_write_dword(rtlpriv, REG_RRSR, reg_rrsr); 515 rtl_write_byte(rtlpriv, REG_SLOT, 0x09); 516 rtl_write_byte(rtlpriv, REG_AMPDU_MIN_SPACE, 0x0); 517 rtl_write_word(rtlpriv, REG_FWHW_TXQ_CTRL, 0x1F80); 518 rtl_write_word(rtlpriv, REG_RL, 0x0707); 519 rtl_write_dword(rtlpriv, REG_BAR_MODE_CTRL, 0x02012802); 520 rtl_write_byte(rtlpriv, REG_HWSEQ_CTRL, 0xFF); 521 rtl_write_dword(rtlpriv, REG_DARFRC, 0x01000000); 522 rtl_write_dword(rtlpriv, REG_DARFRC + 4, 0x07060504); 523 rtl_write_dword(rtlpriv, REG_RARFRC, 0x01000000); 524 rtl_write_dword(rtlpriv, REG_RARFRC + 4, 0x07060504); 525 /* Aggregation threshold */ 526 if (rtlhal->macphymode == DUALMAC_DUALPHY) 527 rtl_write_dword(rtlpriv, REG_AGGLEN_LMT, 0xb9726641); 528 else if (rtlhal->macphymode == DUALMAC_SINGLEPHY) 529 rtl_write_dword(rtlpriv, REG_AGGLEN_LMT, 0x66626641); 530 else 531 rtl_write_dword(rtlpriv, REG_AGGLEN_LMT, 0xb972a841); 532 rtl_write_byte(rtlpriv, REG_ATIMWND, 0x2); 533 rtl_write_byte(rtlpriv, REG_BCN_MAX_ERR, 0x0a); 534 rtlpci->reg_bcn_ctrl_val = 0x1f; 535 rtl_write_byte(rtlpriv, REG_BCN_CTRL, rtlpci->reg_bcn_ctrl_val); 536 rtl_write_byte(rtlpriv, REG_TBTT_PROHIBIT + 1, 0xff); 537 rtl_write_byte(rtlpriv, REG_PIFS, 0x1C); 538 rtl_write_byte(rtlpriv, REG_AGGR_BREAK_TIME, 0x16); 539 rtl_write_word(rtlpriv, REG_NAV_PROT_LEN, 0x0020); 540 /* For throughput */ 541 rtl_write_word(rtlpriv, REG_FAST_EDCA_CTRL, 0x6666); 542 /* ACKTO for IOT issue. */ 543 rtl_write_byte(rtlpriv, REG_ACKTO, 0x40); 544 /* Set Spec SIFS (used in NAV) */ 545 rtl_write_word(rtlpriv, REG_SPEC_SIFS, 0x1010); 546 rtl_write_word(rtlpriv, REG_MAC_SPEC_SIFS, 0x1010); 547 /* Set SIFS for CCK */ 548 rtl_write_word(rtlpriv, REG_SIFS_CTX, 0x1010); 549 /* Set SIFS for OFDM */ 550 rtl_write_word(rtlpriv, REG_SIFS_TRX, 0x1010); 551 /* Set Multicast Address. */ 552 rtl_write_dword(rtlpriv, REG_MAR, 0xffffffff); 553 rtl_write_dword(rtlpriv, REG_MAR + 4, 0xffffffff); 554 switch (rtlpriv->phy.rf_type) { 555 case RF_1T2R: 556 case RF_1T1R: 557 rtlhal->minspace_cfg = (MAX_MSS_DENSITY_1T << 3); 558 break; 559 case RF_2T2R: 560 case RF_2T2R_GREEN: 561 rtlhal->minspace_cfg = (MAX_MSS_DENSITY_2T << 3); 562 break; 563 } 564 } 565 566 static void _rtl92de_enable_aspm_back_door(struct ieee80211_hw *hw) 567 { 568 struct rtl_priv *rtlpriv = rtl_priv(hw); 569 struct rtl_ps_ctl *ppsc = rtl_psc(rtl_priv(hw)); 570 571 rtl_write_byte(rtlpriv, 0x34b, 0x93); 572 rtl_write_word(rtlpriv, 0x350, 0x870c); 573 rtl_write_byte(rtlpriv, 0x352, 0x1); 574 if (ppsc->support_backdoor) 575 rtl_write_byte(rtlpriv, 0x349, 0x1b); 576 else 577 rtl_write_byte(rtlpriv, 0x349, 0x03); 578 rtl_write_word(rtlpriv, 0x350, 0x2718); 579 rtl_write_byte(rtlpriv, 0x352, 0x1); 580 } 581 582 int rtl92de_hw_init(struct ieee80211_hw *hw) 583 { 584 struct rtl_priv *rtlpriv = rtl_priv(hw); 585 struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw)); 586 struct rtl_mac *mac = rtl_mac(rtl_priv(hw)); 587 struct rtl_phy *rtlphy = &(rtlpriv->phy); 588 struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw)); 589 struct rtl_ps_ctl *ppsc = rtl_psc(rtl_priv(hw)); 590 bool rtstatus = true; 591 u8 tmp_u1b; 592 int i; 593 int err; 594 unsigned long flags; 595 596 rtlpci->being_init_adapter = true; 597 rtlpci->init_ready = false; 598 spin_lock_irqsave(&globalmutex_for_power_and_efuse, flags); 599 /* we should do iqk after disable/enable */ 600 rtl92d_phy_reset_iqk_result(hw); 601 /* rtlpriv->intf_ops->disable_aspm(hw); */ 602 rtstatus = _rtl92de_init_mac(hw); 603 if (!rtstatus) { 604 pr_err("Init MAC failed\n"); 605 err = 1; 606 spin_unlock_irqrestore(&globalmutex_for_power_and_efuse, flags); 607 return err; 608 } 609 err = rtl92d_download_fw(hw); 610 spin_unlock_irqrestore(&globalmutex_for_power_and_efuse, flags); 611 if (err) { 612 rtl_dbg(rtlpriv, COMP_ERR, DBG_WARNING, 613 "Failed to download FW. Init HW without FW..\n"); 614 return 1; 615 } 616 rtlhal->last_hmeboxnum = 0; 617 rtlpriv->psc.fw_current_inpsmode = false; 618 619 tmp_u1b = rtl_read_byte(rtlpriv, 0x605); 620 tmp_u1b = tmp_u1b | 0x30; 621 rtl_write_byte(rtlpriv, 0x605, tmp_u1b); 622 623 if (rtlhal->earlymode_enable) { 624 rtl_dbg(rtlpriv, COMP_INIT, DBG_LOUD, 625 "EarlyMode Enabled!!!\n"); 626 627 tmp_u1b = rtl_read_byte(rtlpriv, 0x4d0); 628 tmp_u1b = tmp_u1b | 0x1f; 629 rtl_write_byte(rtlpriv, 0x4d0, tmp_u1b); 630 631 rtl_write_byte(rtlpriv, 0x4d3, 0x80); 632 633 tmp_u1b = rtl_read_byte(rtlpriv, 0x605); 634 tmp_u1b = tmp_u1b | 0x40; 635 rtl_write_byte(rtlpriv, 0x605, tmp_u1b); 636 } 637 638 if (mac->rdg_en) { 639 rtl_write_byte(rtlpriv, REG_RD_CTRL, 0xff); 640 rtl_write_word(rtlpriv, REG_RD_NAV_NXT, 0x200); 641 rtl_write_byte(rtlpriv, REG_RD_RESP_PKT_TH, 0x05); 642 } 643 644 rtl92d_phy_mac_config(hw); 645 /* because last function modify RCR, so we update 646 * rcr var here, or TP will unstable for receive_config 647 * is wrong, RX RCR_ACRC32 will cause TP unstabel & Rx 648 * RCR_APP_ICV will cause mac80211 unassoc for cisco 1252*/ 649 rtlpci->receive_config = rtl_read_dword(rtlpriv, REG_RCR); 650 rtlpci->receive_config &= ~(RCR_ACRC32 | RCR_AICV); 651 652 rtl92d_phy_bb_config(hw); 653 654 rtlphy->rf_mode = RF_OP_BY_SW_3WIRE; 655 /* set before initialize RF */ 656 rtl_set_bbreg(hw, RFPGA0_ANALOGPARAMETER4, 0x00f00000, 0xf); 657 658 /* config RF */ 659 rtl92d_phy_rf_config(hw); 660 661 /* After read predefined TXT, we must set BB/MAC/RF 662 * register as our requirement */ 663 /* After load BB,RF params,we need do more for 92D. */ 664 rtl92d_update_bbrf_configuration(hw); 665 /* set default value after initialize RF, */ 666 rtl_set_bbreg(hw, RFPGA0_ANALOGPARAMETER4, 0x00f00000, 0); 667 rtlphy->rfreg_chnlval[0] = rtl_get_rfreg(hw, (enum radio_path)0, 668 RF_CHNLBW, RFREG_OFFSET_MASK); 669 rtlphy->rfreg_chnlval[1] = rtl_get_rfreg(hw, (enum radio_path)1, 670 RF_CHNLBW, RFREG_OFFSET_MASK); 671 672 /*---- Set CCK and OFDM Block "ON"----*/ 673 if (rtlhal->current_bandtype == BAND_ON_2_4G) 674 rtl_set_bbreg(hw, RFPGA0_RFMOD, BCCKEN, 0x1); 675 rtl_set_bbreg(hw, RFPGA0_RFMOD, BOFDMEN, 0x1); 676 if (rtlhal->interfaceindex == 0) { 677 /* RFPGA0_ANALOGPARAMETER2: cck clock select, 678 * set to 20MHz by default */ 679 rtl_set_bbreg(hw, RFPGA0_ANALOGPARAMETER2, BIT(10) | 680 BIT(11), 3); 681 } else { 682 /* Mac1 */ 683 rtl_set_bbreg(hw, RFPGA0_ANALOGPARAMETER2, BIT(11) | 684 BIT(10), 3); 685 } 686 687 _rtl92de_hw_configure(hw); 688 689 /* reset hw sec */ 690 rtl_cam_reset_all_entry(hw); 691 rtl92d_enable_hw_security_config(hw); 692 693 /* Read EEPROM TX power index and PHY_REG_PG.txt to capture correct */ 694 /* TX power index for different rate set. */ 695 rtl92d_phy_get_hw_reg_originalvalue(hw); 696 rtl92d_phy_set_txpower_level(hw, rtlphy->current_channel); 697 698 ppsc->rfpwr_state = ERFON; 699 700 rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_ETHER_ADDR, mac->mac_addr); 701 702 _rtl92de_enable_aspm_back_door(hw); 703 /* rtlpriv->intf_ops->enable_aspm(hw); */ 704 705 rtl92de_dm_init(hw); 706 rtlpci->being_init_adapter = false; 707 708 if (ppsc->rfpwr_state == ERFON) { 709 rtl92d_phy_lc_calibrate(hw, IS_92D_SINGLEPHY(rtlhal->version)); 710 /* 5G and 2.4G must wait sometime to let RF LO ready */ 711 if (rtlhal->macphymode == DUALMAC_DUALPHY) { 712 u32 tmp_rega; 713 for (i = 0; i < 10000; i++) { 714 udelay(MAX_STALL_TIME); 715 716 tmp_rega = rtl_get_rfreg(hw, 717 (enum radio_path)RF90_PATH_A, 718 0x2a, MASKDWORD); 719 720 if (((tmp_rega & BIT(11)) == BIT(11))) 721 break; 722 } 723 /* check that loop was successful. If not, exit now */ 724 if (i == 10000) { 725 rtlpci->init_ready = false; 726 return 1; 727 } 728 } 729 } 730 rtlpci->init_ready = true; 731 return err; 732 } 733 734 static int _rtl92de_set_media_status(struct ieee80211_hw *hw, 735 enum nl80211_iftype type) 736 { 737 struct rtl_priv *rtlpriv = rtl_priv(hw); 738 u8 bt_msr = rtl_read_byte(rtlpriv, MSR); 739 enum led_ctl_mode ledaction = LED_CTL_NO_LINK; 740 741 bt_msr &= 0xfc; 742 743 if (type == NL80211_IFTYPE_UNSPECIFIED || 744 type == NL80211_IFTYPE_STATION) { 745 rtl92d_stop_tx_beacon(hw); 746 _rtl92de_enable_bcn_sub_func(hw); 747 } else if (type == NL80211_IFTYPE_ADHOC || 748 type == NL80211_IFTYPE_AP) { 749 rtl92d_resume_tx_beacon(hw); 750 _rtl92de_disable_bcn_sub_func(hw); 751 } else { 752 rtl_dbg(rtlpriv, COMP_ERR, DBG_WARNING, 753 "Set HW_VAR_MEDIA_STATUS: No such media status(%x)\n", 754 type); 755 } 756 switch (type) { 757 case NL80211_IFTYPE_UNSPECIFIED: 758 bt_msr |= MSR_NOLINK; 759 ledaction = LED_CTL_LINK; 760 rtl_dbg(rtlpriv, COMP_INIT, DBG_TRACE, 761 "Set Network type to NO LINK!\n"); 762 break; 763 case NL80211_IFTYPE_ADHOC: 764 bt_msr |= MSR_ADHOC; 765 rtl_dbg(rtlpriv, COMP_INIT, DBG_TRACE, 766 "Set Network type to Ad Hoc!\n"); 767 break; 768 case NL80211_IFTYPE_STATION: 769 bt_msr |= MSR_INFRA; 770 ledaction = LED_CTL_LINK; 771 rtl_dbg(rtlpriv, COMP_INIT, DBG_TRACE, 772 "Set Network type to STA!\n"); 773 break; 774 case NL80211_IFTYPE_AP: 775 bt_msr |= MSR_AP; 776 rtl_dbg(rtlpriv, COMP_INIT, DBG_TRACE, 777 "Set Network type to AP!\n"); 778 break; 779 default: 780 pr_err("Network type %d not supported!\n", type); 781 return 1; 782 } 783 rtl_write_byte(rtlpriv, MSR, bt_msr); 784 rtlpriv->cfg->ops->led_control(hw, ledaction); 785 if ((bt_msr & MSR_MASK) == MSR_AP) 786 rtl_write_byte(rtlpriv, REG_BCNTCFG + 1, 0x00); 787 else 788 rtl_write_byte(rtlpriv, REG_BCNTCFG + 1, 0x66); 789 return 0; 790 } 791 792 void rtl92de_set_check_bssid(struct ieee80211_hw *hw, bool check_bssid) 793 { 794 struct rtl_priv *rtlpriv = rtl_priv(hw); 795 u32 reg_rcr; 796 797 if (rtlpriv->psc.rfpwr_state != ERFON) 798 return; 799 800 rtlpriv->cfg->ops->get_hw_reg(hw, HW_VAR_RCR, (u8 *)(®_rcr)); 801 802 if (check_bssid) { 803 reg_rcr |= (RCR_CBSSID_DATA | RCR_CBSSID_BCN); 804 rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_RCR, (u8 *)(®_rcr)); 805 _rtl92de_set_bcn_ctrl_reg(hw, 0, BIT(4)); 806 } else if (!check_bssid) { 807 reg_rcr &= (~(RCR_CBSSID_DATA | RCR_CBSSID_BCN)); 808 _rtl92de_set_bcn_ctrl_reg(hw, BIT(4), 0); 809 rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_RCR, (u8 *)(®_rcr)); 810 } 811 } 812 813 int rtl92de_set_network_type(struct ieee80211_hw *hw, enum nl80211_iftype type) 814 { 815 struct rtl_priv *rtlpriv = rtl_priv(hw); 816 817 if (_rtl92de_set_media_status(hw, type)) 818 return -EOPNOTSUPP; 819 820 /* check bssid */ 821 if (rtlpriv->mac80211.link_state == MAC80211_LINKED) { 822 if (type != NL80211_IFTYPE_AP) 823 rtl92de_set_check_bssid(hw, true); 824 } else { 825 rtl92de_set_check_bssid(hw, false); 826 } 827 return 0; 828 } 829 830 /* do iqk or reload iqk */ 831 /* windows just rtl92d_phy_reload_iqk_setting in set channel, 832 * but it's very strict for time sequence so we add 833 * rtl92d_phy_reload_iqk_setting here */ 834 void rtl92d_linked_set_reg(struct ieee80211_hw *hw) 835 { 836 struct rtl_priv *rtlpriv = rtl_priv(hw); 837 struct rtl_phy *rtlphy = &(rtlpriv->phy); 838 u8 indexforchannel; 839 u8 channel = rtlphy->current_channel; 840 841 indexforchannel = rtl92d_get_rightchnlplace_for_iqk(channel); 842 if (!rtlphy->iqk_matrix[indexforchannel].iqk_done) { 843 rtl_dbg(rtlpriv, COMP_SCAN | COMP_INIT, DBG_DMESG, 844 "Do IQK for channel:%d\n", channel); 845 rtl92d_phy_iq_calibrate(hw); 846 } 847 } 848 849 void rtl92de_enable_interrupt(struct ieee80211_hw *hw) 850 { 851 struct rtl_priv *rtlpriv = rtl_priv(hw); 852 struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw)); 853 854 rtl_write_dword(rtlpriv, REG_HIMR, rtlpci->irq_mask[0] & 0xFFFFFFFF); 855 rtl_write_dword(rtlpriv, REG_HIMRE, rtlpci->irq_mask[1] & 0xFFFFFFFF); 856 rtlpci->irq_enabled = true; 857 } 858 859 void rtl92de_disable_interrupt(struct ieee80211_hw *hw) 860 { 861 struct rtl_priv *rtlpriv = rtl_priv(hw); 862 struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw)); 863 864 rtl_write_dword(rtlpriv, REG_HIMR, IMR8190_DISABLED); 865 rtl_write_dword(rtlpriv, REG_HIMRE, IMR8190_DISABLED); 866 rtlpci->irq_enabled = false; 867 } 868 869 static void _rtl92de_poweroff_adapter(struct ieee80211_hw *hw) 870 { 871 struct rtl_priv *rtlpriv = rtl_priv(hw); 872 u8 u1b_tmp; 873 unsigned long flags; 874 875 rtlpriv->intf_ops->enable_aspm(hw); 876 rtl_write_byte(rtlpriv, REG_RF_CTRL, 0x00); 877 rtl_set_bbreg(hw, RFPGA0_XCD_RFPARAMETER, BIT(3), 0); 878 rtl_set_bbreg(hw, RFPGA0_XCD_RFPARAMETER, BIT(15), 0); 879 880 /* 0x20:value 05-->04 */ 881 rtl_write_byte(rtlpriv, REG_LDOA15_CTRL, 0x04); 882 883 /* ==== Reset digital sequence ====== */ 884 rtl92d_firmware_selfreset(hw); 885 886 /* f. SYS_FUNC_EN 0x03[7:0]=0x51 reset MCU, MAC register, DCORE */ 887 rtl_write_byte(rtlpriv, REG_SYS_FUNC_EN + 1, 0x51); 888 889 /* g. MCUFWDL 0x80[1:0]=0 reset MCU ready status */ 890 rtl_write_byte(rtlpriv, REG_MCUFWDL, 0x00); 891 892 /* ==== Pull GPIO PIN to balance level and LED control ====== */ 893 894 /* h. GPIO_PIN_CTRL 0x44[31:0]=0x000 */ 895 rtl_write_dword(rtlpriv, REG_GPIO_PIN_CTRL, 0x00000000); 896 897 /* i. Value = GPIO_PIN_CTRL[7:0] */ 898 u1b_tmp = rtl_read_byte(rtlpriv, REG_GPIO_PIN_CTRL); 899 900 /* j. GPIO_PIN_CTRL 0x44[31:0] = 0x00FF0000 | (value <<8); */ 901 /* write external PIN level */ 902 rtl_write_dword(rtlpriv, REG_GPIO_PIN_CTRL, 903 0x00FF0000 | (u1b_tmp << 8)); 904 905 /* k. GPIO_MUXCFG 0x42 [15:0] = 0x0780 */ 906 rtl_write_word(rtlpriv, REG_GPIO_IO_SEL, 0x0790); 907 908 /* l. LEDCFG 0x4C[15:0] = 0x8080 */ 909 rtl_write_word(rtlpriv, REG_LEDCFG0, 0x8080); 910 911 /* ==== Disable analog sequence === */ 912 913 /* m. AFE_PLL_CTRL[7:0] = 0x80 disable PLL */ 914 rtl_write_byte(rtlpriv, REG_AFE_PLL_CTRL, 0x80); 915 916 /* n. SPS0_CTRL 0x11[7:0] = 0x22 enter PFM mode */ 917 rtl_write_byte(rtlpriv, REG_SPS0_CTRL, 0x23); 918 919 /* o. AFE_XTAL_CTRL 0x24[7:0] = 0x0E disable XTAL, if No BT COEX */ 920 rtl_write_byte(rtlpriv, REG_AFE_XTAL_CTRL, 0x0e); 921 922 /* p. RSV_CTRL 0x1C[7:0] = 0x0E lock ISO/CLK/Power control register */ 923 rtl_write_byte(rtlpriv, REG_RSV_CTRL, 0x0e); 924 925 /* ==== interface into suspend === */ 926 927 /* q. APS_FSMCO[15:8] = 0x58 PCIe suspend mode */ 928 /* According to power document V11, we need to set this */ 929 /* value as 0x18. Otherwise, we may not L0s sometimes. */ 930 /* This indluences power consumption. Bases on SD1's test, */ 931 /* set as 0x00 do not affect power current. And if it */ 932 /* is set as 0x18, they had ever met auto load fail problem. */ 933 rtl_write_byte(rtlpriv, REG_APS_FSMCO + 1, 0x10); 934 935 rtl_dbg(rtlpriv, COMP_INIT, DBG_LOUD, 936 "In PowerOff,reg0x%x=%X\n", 937 REG_SPS0_CTRL, rtl_read_byte(rtlpriv, REG_SPS0_CTRL)); 938 /* r. Note: for PCIe interface, PON will not turn */ 939 /* off m-bias and BandGap in PCIe suspend mode. */ 940 941 /* 0x17[7] 1b': power off in process 0b' : power off over */ 942 if (rtlpriv->rtlhal.macphymode != SINGLEMAC_SINGLEPHY) { 943 spin_lock_irqsave(&globalmutex_power, flags); 944 u1b_tmp = rtl_read_byte(rtlpriv, REG_POWER_OFF_IN_PROCESS); 945 u1b_tmp &= (~BIT(7)); 946 rtl_write_byte(rtlpriv, REG_POWER_OFF_IN_PROCESS, u1b_tmp); 947 spin_unlock_irqrestore(&globalmutex_power, flags); 948 } 949 950 rtl_dbg(rtlpriv, COMP_INIT, DBG_LOUD, "<=======\n"); 951 } 952 953 void rtl92de_card_disable(struct ieee80211_hw *hw) 954 { 955 struct rtl_priv *rtlpriv = rtl_priv(hw); 956 struct rtl_ps_ctl *ppsc = rtl_psc(rtl_priv(hw)); 957 struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw)); 958 struct rtl_mac *mac = rtl_mac(rtl_priv(hw)); 959 enum nl80211_iftype opmode; 960 961 mac->link_state = MAC80211_NOLINK; 962 opmode = NL80211_IFTYPE_UNSPECIFIED; 963 _rtl92de_set_media_status(hw, opmode); 964 965 if (rtlpci->driver_is_goingto_unload || 966 ppsc->rfoff_reason > RF_CHANGE_BY_PS) 967 rtlpriv->cfg->ops->led_control(hw, LED_CTL_POWER_OFF); 968 RT_SET_PS_LEVEL(ppsc, RT_RF_OFF_LEVL_HALT_NIC); 969 /* Power sequence for each MAC. */ 970 /* a. stop tx DMA */ 971 /* b. close RF */ 972 /* c. clear rx buf */ 973 /* d. stop rx DMA */ 974 /* e. reset MAC */ 975 976 /* a. stop tx DMA */ 977 rtl_write_byte(rtlpriv, REG_PCIE_CTRL_REG + 1, 0xFE); 978 udelay(50); 979 980 /* b. TXPAUSE 0x522[7:0] = 0xFF Pause MAC TX queue */ 981 982 /* c. ========RF OFF sequence========== */ 983 /* 0x88c[23:20] = 0xf. */ 984 rtl_set_bbreg(hw, RFPGA0_ANALOGPARAMETER4, 0x00f00000, 0xf); 985 rtl_set_rfreg(hw, RF90_PATH_A, 0x00, RFREG_OFFSET_MASK, 0x00); 986 987 /* APSD_CTRL 0x600[7:0] = 0x40 */ 988 rtl_write_byte(rtlpriv, REG_APSD_CTRL, 0x40); 989 990 /* Close antenna 0,0xc04,0xd04 */ 991 rtl_set_bbreg(hw, ROFDM0_TRXPATHENABLE, MASKBYTE0, 0); 992 rtl_set_bbreg(hw, ROFDM1_TRXPATHENABLE, BDWORD, 0); 993 994 /* SYS_FUNC_EN 0x02[7:0] = 0xE2 reset BB state machine */ 995 rtl_write_byte(rtlpriv, REG_SYS_FUNC_EN, 0xE2); 996 997 /* Mac0 can not do Global reset. Mac1 can do. */ 998 /* SYS_FUNC_EN 0x02[7:0] = 0xE0 reset BB state machine */ 999 if (rtlpriv->rtlhal.interfaceindex == 1) 1000 rtl_write_byte(rtlpriv, REG_SYS_FUNC_EN, 0xE0); 1001 udelay(50); 1002 1003 /* d. stop tx/rx dma before disable REG_CR (0x100) to fix */ 1004 /* dma hang issue when disable/enable device. */ 1005 rtl_write_byte(rtlpriv, REG_PCIE_CTRL_REG + 1, 0xff); 1006 udelay(50); 1007 rtl_write_byte(rtlpriv, REG_CR, 0x0); 1008 rtl_dbg(rtlpriv, COMP_INIT, DBG_LOUD, "==> Do power off.......\n"); 1009 if (rtl92d_phy_check_poweroff(hw)) 1010 _rtl92de_poweroff_adapter(hw); 1011 return; 1012 } 1013 1014 void rtl92de_interrupt_recognized(struct ieee80211_hw *hw, 1015 struct rtl_int *intvec) 1016 { 1017 struct rtl_priv *rtlpriv = rtl_priv(hw); 1018 struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw)); 1019 1020 intvec->inta = rtl_read_dword(rtlpriv, ISR) & rtlpci->irq_mask[0]; 1021 rtl_write_dword(rtlpriv, ISR, intvec->inta); 1022 } 1023 1024 void rtl92de_set_beacon_related_registers(struct ieee80211_hw *hw) 1025 { 1026 struct rtl_priv *rtlpriv = rtl_priv(hw); 1027 struct rtl_mac *mac = rtl_mac(rtl_priv(hw)); 1028 u16 bcn_interval, atim_window; 1029 1030 bcn_interval = mac->beacon_interval; 1031 atim_window = 2; 1032 rtl92de_disable_interrupt(hw); 1033 rtl_write_word(rtlpriv, REG_ATIMWND, atim_window); 1034 rtl_write_word(rtlpriv, REG_BCN_INTERVAL, bcn_interval); 1035 rtl_write_word(rtlpriv, REG_BCNTCFG, 0x660f); 1036 rtl_write_byte(rtlpriv, REG_RXTSF_OFFSET_CCK, 0x20); 1037 if (rtlpriv->rtlhal.current_bandtype == BAND_ON_5G) 1038 rtl_write_byte(rtlpriv, REG_RXTSF_OFFSET_OFDM, 0x30); 1039 else 1040 rtl_write_byte(rtlpriv, REG_RXTSF_OFFSET_OFDM, 0x20); 1041 rtl_write_byte(rtlpriv, 0x606, 0x30); 1042 } 1043 1044 void rtl92de_set_beacon_interval(struct ieee80211_hw *hw) 1045 { 1046 struct rtl_priv *rtlpriv = rtl_priv(hw); 1047 struct rtl_mac *mac = rtl_mac(rtl_priv(hw)); 1048 u16 bcn_interval = mac->beacon_interval; 1049 1050 rtl_dbg(rtlpriv, COMP_BEACON, DBG_DMESG, 1051 "beacon_interval:%d\n", bcn_interval); 1052 rtl92de_disable_interrupt(hw); 1053 rtl_write_word(rtlpriv, REG_BCN_INTERVAL, bcn_interval); 1054 rtl92de_enable_interrupt(hw); 1055 } 1056 1057 void rtl92de_update_interrupt_mask(struct ieee80211_hw *hw, 1058 u32 add_msr, u32 rm_msr) 1059 { 1060 struct rtl_priv *rtlpriv = rtl_priv(hw); 1061 struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw)); 1062 1063 rtl_dbg(rtlpriv, COMP_INTR, DBG_LOUD, "add_msr:%x, rm_msr:%x\n", 1064 add_msr, rm_msr); 1065 if (add_msr) 1066 rtlpci->irq_mask[0] |= add_msr; 1067 if (rm_msr) 1068 rtlpci->irq_mask[0] &= (~rm_msr); 1069 rtl92de_disable_interrupt(hw); 1070 rtl92de_enable_interrupt(hw); 1071 } 1072 1073 void rtl92de_suspend(struct ieee80211_hw *hw) 1074 { 1075 struct rtl_priv *rtlpriv = rtl_priv(hw); 1076 1077 rtlpriv->rtlhal.macphyctl_reg = rtl_read_byte(rtlpriv, 1078 REG_MAC_PHY_CTRL_NORMAL); 1079 } 1080 1081 void rtl92de_resume(struct ieee80211_hw *hw) 1082 { 1083 struct rtl_priv *rtlpriv = rtl_priv(hw); 1084 1085 rtl_write_byte(rtlpriv, REG_MAC_PHY_CTRL_NORMAL, 1086 rtlpriv->rtlhal.macphyctl_reg); 1087 } 1088