xref: /linux/drivers/net/wireless/purelifi/plfxlc/intf.h (revision ed5c2f5fd10dda07263f79f338a512c0f49f76f5)
1 /* SPDX-License-Identifier: GPL-2.0-only */
2 /*
3  * Copyright (c) 2021 pureLiFi
4  */
5 
6 #define PURELIFI_BYTE_NUM_ALIGNMENT 4
7 #define ETH_ALEN 6
8 #define AP_USER_LIMIT 8
9 
10 #define PLF_VNDR_FPGA_STATE_REQ 0x30
11 #define PLF_VNDR_FPGA_SET_REQ 0x33
12 #define PLF_VNDR_FPGA_SET_CMD 0x34
13 #define PLF_VNDR_FPGA_STATE_CMD 0x35
14 
15 #define PLF_VNDR_XL_FW_CMD 0x80
16 #define PLF_VNDR_XL_DATA_CMD 0x81
17 #define PLF_VNDR_XL_FILE_CMD 0x82
18 #define PLF_VNDR_XL_EX_CMD 0x83
19 
20 #define PLF_MAC_VENDOR_REQUEST 0x36
21 #define PLF_SERIAL_NUMBER_VENDOR_REQUEST 0x37
22 #define PLF_FIRMWARE_VERSION_VENDOR_REQUEST 0x39
23 #define PLF_SERIAL_LEN 14
24 #define PLF_FW_VER_LEN 8
25 
26 struct rx_status {
27 	__be16 rssi;
28 	u8     rate_idx;
29 	u8     pad;
30 	__be64 crc_error_count;
31 } __packed;
32 
33 enum plf_usb_req_enum {
34 	USB_REQ_TEST_WR            = 0,
35 	USB_REQ_MAC_WR             = 1,
36 	USB_REQ_POWER_WR           = 2,
37 	USB_REQ_RXTX_WR            = 3,
38 	USB_REQ_BEACON_WR          = 4,
39 	USB_REQ_BEACON_INTERVAL_WR = 5,
40 	USB_REQ_RTS_CTS_RATE_WR    = 6,
41 	USB_REQ_HASH_WR            = 7,
42 	USB_REQ_DATA_TX            = 8,
43 	USB_REQ_RATE_WR            = 9,
44 	USB_REQ_SET_FREQ           = 15
45 };
46 
47 struct plf_usb_req {
48 	__be32         id; /* should be plf_usb_req_enum */
49 	__be32	       len;
50 	u8             buf[512];
51 };
52 
53