1 /* SPDX-License-Identifier: GPL-2.0-only */ 2 /* 3 * NXP Wireless LAN device driver: SDIO specific definitions 4 * 5 * Copyright 2011-2020 NXP 6 */ 7 8 #ifndef _MWIFIEX_SDIO_H 9 #define _MWIFIEX_SDIO_H 10 11 12 #include <linux/completion.h> 13 #include <linux/mmc/sdio.h> 14 #include <linux/mmc/sdio_ids.h> 15 #include <linux/mmc/sdio_func.h> 16 #include <linux/mmc/card.h> 17 #include <linux/mmc/host.h> 18 19 #include "main.h" 20 21 #define SD8786_DEFAULT_FW_NAME "mrvl/sd8786_uapsta.bin" 22 #define SD8787_DEFAULT_FW_NAME "mrvl/sd8787_uapsta.bin" 23 #define SD8797_DEFAULT_FW_NAME "mrvl/sd8797_uapsta.bin" 24 #define SD8897_DEFAULT_FW_NAME "mrvl/sd8897_uapsta.bin" 25 #define SD8887_DEFAULT_FW_NAME "mrvl/sd8887_uapsta.bin" 26 #define SD8801_DEFAULT_FW_NAME "mrvl/sd8801_uapsta.bin" 27 #define SD8977_DEFAULT_FW_NAME "mrvl/sdsd8977_combo_v2.bin" 28 #define SD8978_SDIOUART_FW_NAME "mrvl/sdiouartiw416_combo_v0.bin" 29 #define SD8987_DEFAULT_FW_NAME "mrvl/sd8987_uapsta.bin" 30 #define SD8997_DEFAULT_FW_NAME "mrvl/sdsd8997_combo_v4.bin" 31 #define SD8997_SDIOUART_FW_NAME "mrvl/sdiouart8997_combo_v4.bin" 32 33 #define BLOCK_MODE 1 34 #define BYTE_MODE 0 35 36 #define MWIFIEX_SDIO_IO_PORT_MASK 0xfffff 37 38 #define MWIFIEX_SDIO_BYTE_MODE_MASK 0x80000000 39 40 #define MWIFIEX_MAX_FUNC2_REG_NUM 13 41 #define MWIFIEX_SDIO_SCRATCH_SIZE 10 42 43 #define SDIO_MPA_ADDR_BASE 0x1000 44 #define CTRL_PORT 0 45 #define CTRL_PORT_MASK 0x0001 46 47 #define CMD_PORT_UPLD_INT_MASK (0x1U<<6) 48 #define CMD_PORT_DNLD_INT_MASK (0x1U<<7) 49 #define HOST_TERM_CMD53 (0x1U << 2) 50 #define REG_PORT 0 51 #define MEM_PORT 0x10000 52 53 #define CMD53_NEW_MODE (0x1U << 0) 54 #define CMD_PORT_RD_LEN_EN (0x1U << 2) 55 #define CMD_PORT_AUTO_EN (0x1U << 0) 56 #define CMD_PORT_SLCT 0x8000 57 #define UP_LD_CMD_PORT_HOST_INT_STATUS (0x40U) 58 #define DN_LD_CMD_PORT_HOST_INT_STATUS (0x80U) 59 60 #define MWIFIEX_MP_AGGR_BUF_SIZE_16K (16384) 61 #define MWIFIEX_MP_AGGR_BUF_SIZE_32K (32768) 62 /* we leave one block of 256 bytes for DMA alignment*/ 63 #define MWIFIEX_MP_AGGR_BUF_SIZE_MAX (65280) 64 65 /* Misc. Config Register : Auto Re-enable interrupts */ 66 #define AUTO_RE_ENABLE_INT BIT(4) 67 68 /* Host Control Registers : Configuration */ 69 #define CONFIGURATION_REG 0x00 70 /* Host Control Registers : Host power up */ 71 #define HOST_POWER_UP (0x1U << 1) 72 73 /* Host Control Registers : Upload host interrupt mask */ 74 #define UP_LD_HOST_INT_MASK (0x1U) 75 /* Host Control Registers : Download host interrupt mask */ 76 #define DN_LD_HOST_INT_MASK (0x2U) 77 78 /* Host Control Registers : Upload host interrupt status */ 79 #define UP_LD_HOST_INT_STATUS (0x1U) 80 /* Host Control Registers : Download host interrupt status */ 81 #define DN_LD_HOST_INT_STATUS (0x2U) 82 83 /* Host Control Registers : Host interrupt status */ 84 #define CARD_INT_STATUS_REG 0x28 85 86 /* Card Control Registers : Card I/O ready */ 87 #define CARD_IO_READY (0x1U << 3) 88 /* Card Control Registers : Download card ready */ 89 #define DN_LD_CARD_RDY (0x1U << 0) 90 91 /* Max retry number of CMD53 write */ 92 #define MAX_WRITE_IOMEM_RETRY 2 93 94 /* SDIO Tx aggregation in progress ? */ 95 #define MP_TX_AGGR_IN_PROGRESS(a) (a->mpa_tx.pkt_cnt > 0) 96 97 /* SDIO Tx aggregation buffer room for next packet ? */ 98 #define MP_TX_AGGR_BUF_HAS_ROOM(a, len) ((a->mpa_tx.buf_len+len) \ 99 <= a->mpa_tx.buf_size) 100 101 /* Copy current packet (SDIO Tx aggregation buffer) to SDIO buffer */ 102 #define MP_TX_AGGR_BUF_PUT(a, payload, pkt_len, port) do { \ 103 memmove(&a->mpa_tx.buf[a->mpa_tx.buf_len], \ 104 payload, pkt_len); \ 105 a->mpa_tx.buf_len += pkt_len; \ 106 if (!a->mpa_tx.pkt_cnt) \ 107 a->mpa_tx.start_port = port; \ 108 if (a->mpa_tx.start_port <= port) \ 109 a->mpa_tx.ports |= (1<<(a->mpa_tx.pkt_cnt)); \ 110 else \ 111 a->mpa_tx.ports |= (1<<(a->mpa_tx.pkt_cnt+1+ \ 112 (a->max_ports - \ 113 a->mp_end_port))); \ 114 a->mpa_tx.pkt_cnt++; \ 115 } while (0) 116 117 /* SDIO Tx aggregation limit ? */ 118 #define MP_TX_AGGR_PKT_LIMIT_REACHED(a) \ 119 (a->mpa_tx.pkt_cnt == a->mpa_tx.pkt_aggr_limit) 120 121 /* Reset SDIO Tx aggregation buffer parameters */ 122 #define MP_TX_AGGR_BUF_RESET(a) do { \ 123 a->mpa_tx.pkt_cnt = 0; \ 124 a->mpa_tx.buf_len = 0; \ 125 a->mpa_tx.ports = 0; \ 126 a->mpa_tx.start_port = 0; \ 127 } while (0) 128 129 /* SDIO Rx aggregation limit ? */ 130 #define MP_RX_AGGR_PKT_LIMIT_REACHED(a) \ 131 (a->mpa_rx.pkt_cnt == a->mpa_rx.pkt_aggr_limit) 132 133 /* SDIO Rx aggregation in progress ? */ 134 #define MP_RX_AGGR_IN_PROGRESS(a) (a->mpa_rx.pkt_cnt > 0) 135 136 /* SDIO Rx aggregation buffer room for next packet ? */ 137 #define MP_RX_AGGR_BUF_HAS_ROOM(a, rx_len) \ 138 ((a->mpa_rx.buf_len+rx_len) <= a->mpa_rx.buf_size) 139 140 /* Reset SDIO Rx aggregation buffer parameters */ 141 #define MP_RX_AGGR_BUF_RESET(a) do { \ 142 a->mpa_rx.pkt_cnt = 0; \ 143 a->mpa_rx.buf_len = 0; \ 144 a->mpa_rx.ports = 0; \ 145 a->mpa_rx.start_port = 0; \ 146 } while (0) 147 148 /* data structure for SDIO MPA TX */ 149 struct mwifiex_sdio_mpa_tx { 150 /* multiport tx aggregation buffer pointer */ 151 u8 *buf; 152 u32 buf_len; 153 u32 pkt_cnt; 154 u32 ports; 155 u16 start_port; 156 u8 enabled; 157 u32 buf_size; 158 u32 pkt_aggr_limit; 159 }; 160 161 struct mwifiex_sdio_mpa_rx { 162 u8 *buf; 163 u32 buf_len; 164 u32 pkt_cnt; 165 u32 ports; 166 u16 start_port; 167 u32 *len_arr; 168 u8 enabled; 169 u32 buf_size; 170 u32 pkt_aggr_limit; 171 }; 172 173 int mwifiex_bus_register(void); 174 void mwifiex_bus_unregister(void); 175 176 struct mwifiex_sdio_card_reg { 177 u8 start_rd_port; 178 u8 start_wr_port; 179 u8 base_0_reg; 180 u8 base_1_reg; 181 u8 poll_reg; 182 u8 host_int_enable; 183 u8 host_int_rsr_reg; 184 u8 host_int_status_reg; 185 u8 host_int_mask_reg; 186 u8 host_strap_reg; 187 u8 host_strap_mask; 188 u8 host_strap_value; 189 u8 status_reg_0; 190 u8 status_reg_1; 191 u8 sdio_int_mask; 192 u32 data_port_mask; 193 u8 io_port_0_reg; 194 u8 io_port_1_reg; 195 u8 io_port_2_reg; 196 u8 max_mp_regs; 197 u8 rd_bitmap_l; 198 u8 rd_bitmap_u; 199 u8 rd_bitmap_1l; 200 u8 rd_bitmap_1u; 201 u8 wr_bitmap_l; 202 u8 wr_bitmap_u; 203 u8 wr_bitmap_1l; 204 u8 wr_bitmap_1u; 205 u8 rd_len_p0_l; 206 u8 rd_len_p0_u; 207 u8 card_misc_cfg_reg; 208 u8 card_cfg_2_1_reg; 209 u8 cmd_rd_len_0; 210 u8 cmd_rd_len_1; 211 u8 cmd_rd_len_2; 212 u8 cmd_rd_len_3; 213 u8 cmd_cfg_0; 214 u8 cmd_cfg_1; 215 u8 cmd_cfg_2; 216 u8 cmd_cfg_3; 217 u8 fw_dump_host_ready; 218 u8 fw_dump_ctrl; 219 u8 fw_dump_start; 220 u8 fw_dump_end; 221 u8 func1_dump_reg_start; 222 u8 func1_dump_reg_end; 223 u8 func1_scratch_reg; 224 u8 func1_spec_reg_num; 225 u8 func1_spec_reg_table[MWIFIEX_MAX_FUNC2_REG_NUM]; 226 }; 227 228 struct sdio_mmc_card { 229 struct sdio_func *func; 230 struct mwifiex_adapter *adapter; 231 232 struct completion fw_done; 233 const char *firmware; 234 const char *firmware_sdiouart; 235 const struct mwifiex_sdio_card_reg *reg; 236 u8 max_ports; 237 u8 mp_agg_pkt_limit; 238 u16 tx_buf_size; 239 u32 mp_tx_agg_buf_size; 240 u32 mp_rx_agg_buf_size; 241 242 u32 mp_rd_bitmap; 243 u32 mp_wr_bitmap; 244 245 u16 mp_end_port; 246 u32 mp_data_port_mask; 247 248 u8 curr_rd_port; 249 u8 curr_wr_port; 250 251 u8 *mp_regs; 252 bool supports_sdio_new_mode; 253 bool has_control_mask; 254 bool can_dump_fw; 255 bool fw_dump_enh; 256 bool can_auto_tdls; 257 bool can_ext_scan; 258 bool fw_ready_extra_delay; 259 bool host_mlme; 260 261 struct mwifiex_sdio_mpa_tx mpa_tx; 262 struct mwifiex_sdio_mpa_rx mpa_rx; 263 264 struct work_struct work; 265 unsigned long work_flags; 266 }; 267 268 struct mwifiex_sdio_device { 269 const char *firmware; 270 const char *firmware_sdiouart; 271 const struct mwifiex_sdio_card_reg *reg; 272 u8 max_ports; 273 u8 mp_agg_pkt_limit; 274 u16 tx_buf_size; 275 u32 mp_tx_agg_buf_size; 276 u32 mp_rx_agg_buf_size; 277 bool supports_sdio_new_mode; 278 bool has_control_mask; 279 bool can_dump_fw; 280 bool fw_dump_enh; 281 bool can_auto_tdls; 282 bool can_ext_scan; 283 bool fw_ready_extra_delay; 284 bool host_mlme; 285 }; 286 287 /* 288 * .cmdrsp_complete handler 289 */ 290 static inline int mwifiex_sdio_cmdrsp_complete(struct mwifiex_adapter *adapter, 291 struct sk_buff *skb) 292 { 293 dev_kfree_skb_any(skb); 294 return 0; 295 } 296 297 /* 298 * .event_complete handler 299 */ 300 static inline int mwifiex_sdio_event_complete(struct mwifiex_adapter *adapter, 301 struct sk_buff *skb) 302 { 303 dev_kfree_skb_any(skb); 304 return 0; 305 } 306 307 static inline bool 308 mp_rx_aggr_port_limit_reached(struct sdio_mmc_card *card) 309 { 310 u8 tmp; 311 312 if (card->curr_rd_port < card->mpa_rx.start_port) { 313 if (card->supports_sdio_new_mode) 314 tmp = card->mp_end_port >> 1; 315 else 316 tmp = card->mp_agg_pkt_limit; 317 318 if (((card->max_ports - card->mpa_rx.start_port) + 319 card->curr_rd_port) >= tmp) 320 return true; 321 } 322 323 if (!card->supports_sdio_new_mode) 324 return false; 325 326 if ((card->curr_rd_port - card->mpa_rx.start_port) >= 327 (card->mp_end_port >> 1)) 328 return true; 329 330 return false; 331 } 332 333 static inline bool 334 mp_tx_aggr_port_limit_reached(struct sdio_mmc_card *card) 335 { 336 u16 tmp; 337 338 if (card->curr_wr_port < card->mpa_tx.start_port) { 339 if (card->supports_sdio_new_mode) 340 tmp = card->mp_end_port >> 1; 341 else 342 tmp = card->mp_agg_pkt_limit; 343 344 if (((card->max_ports - card->mpa_tx.start_port) + 345 card->curr_wr_port) >= tmp) 346 return true; 347 } 348 349 if (!card->supports_sdio_new_mode) 350 return false; 351 352 if ((card->curr_wr_port - card->mpa_tx.start_port) >= 353 (card->mp_end_port >> 1)) 354 return true; 355 356 return false; 357 } 358 359 /* Prepare to copy current packet from card to SDIO Rx aggregation buffer */ 360 static inline void mp_rx_aggr_setup(struct sdio_mmc_card *card, 361 u16 rx_len, u8 port) 362 { 363 card->mpa_rx.buf_len += rx_len; 364 365 if (!card->mpa_rx.pkt_cnt) 366 card->mpa_rx.start_port = port; 367 368 if (card->supports_sdio_new_mode) { 369 card->mpa_rx.ports |= (1 << port); 370 } else { 371 if (card->mpa_rx.start_port <= port) 372 card->mpa_rx.ports |= 1 << (card->mpa_rx.pkt_cnt); 373 else 374 card->mpa_rx.ports |= 1 << (card->mpa_rx.pkt_cnt + 1); 375 } 376 card->mpa_rx.len_arr[card->mpa_rx.pkt_cnt] = rx_len; 377 card->mpa_rx.pkt_cnt++; 378 } 379 #endif /* _MWIFIEX_SDIO_H */ 380