1 /* SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause */ 2 /* 3 * Copyright (C) 2024-2025 Intel Corporation 4 */ 5 #ifndef __iwl_mld_h__ 6 #define __iwl_mld_h__ 7 8 #include <linux/leds.h> 9 #include <net/mac80211.h> 10 11 #include "iwl-trans.h" 12 #include "iwl-op-mode.h" 13 #include "fw/runtime.h" 14 #include "fw/notif-wait.h" 15 #include "fw/api/commands.h" 16 #include "fw/api/scan.h" 17 #include "fw/api/mac-cfg.h" 18 #include "fw/api/mac.h" 19 #include "fw/api/phy-ctxt.h" 20 #include "fw/api/datapath.h" 21 #include "fw/api/rx.h" 22 #include "fw/api/rs.h" 23 #include "fw/api/context.h" 24 #include "fw/api/coex.h" 25 #include "fw/api/location.h" 26 27 #include "fw/dbg.h" 28 29 #include "notif.h" 30 #include "scan.h" 31 #include "rx.h" 32 #include "thermal.h" 33 #include "low_latency.h" 34 #include "constants.h" 35 #include "ptp.h" 36 #include "time_sync.h" 37 #include "ftm-initiator.h" 38 39 /** 40 * DOC: Introduction 41 * 42 * iwlmld is an operation mode (a.k.a. op_mode) for Intel wireless devices. 43 * It is used for devices that ship after 2024 which typically support 44 * the WiFi-7 features. MLD stands for multi-link device. Note that there are 45 * devices that do not support WiFi-7 or even WiFi 6E and yet use iwlmld, but 46 * the firmware APIs used in this driver are WiFi-7 compatible. 47 * 48 * In the architecture of iwlwifi, an op_mode is a layer that translates 49 * mac80211's APIs into commands for the firmware and, of course, notifications 50 * from the firmware to mac80211's APIs. An op_mode must implement the 51 * interface defined in iwl-op-mode.h to interact with the transport layer 52 * which allows to send and receive data to the device, start the hardware, 53 * etc... 54 */ 55 56 /** 57 * DOC: Locking policy 58 * 59 * iwlmld has a very simple locking policy: it doesn't have any mutexes. It 60 * relies on cfg80211's wiphy->mtx and takes the lock when needed. All the 61 * control flows originating from mac80211 already acquired the lock, so that 62 * part is trivial, but also notifications that are received from the firmware 63 * and handled asynchronously are handled only after having taken the lock. 64 * This is described in notif.c. 65 * There are spin_locks needed to synchronize with the data path, around the 66 * allocation of the queues, for example. 67 */ 68 69 /** 70 * DOC: Debugfs 71 * 72 * iwlmld adds its share of debugfs hooks and its handlers are synchronized 73 * with the wiphy_lock using wiphy_locked_debugfs. This avoids races against 74 * resources deletion while the debugfs hook is being used. 75 */ 76 77 /** 78 * DOC: Main resources 79 * 80 * iwlmld is designed with the life cycle of the resource in mind. The 81 * resources are: 82 * 83 * - struct iwl_mld (matches mac80211's struct ieee80211_hw) 84 * 85 * - struct iwl_mld_vif (matches macu80211's struct ieee80211_vif) 86 * iwl_mld_vif contains an array of pointers to struct iwl_mld_link 87 * which describe the links for this vif. 88 * 89 * - struct iwl_mld_sta (matches mac80211's struct ieee80211_sta) 90 * iwl_mld_sta contains an array of points to struct iwl_mld_link_sta 91 * which describes the link stations for this station 92 * 93 * Each object has properties that can survive a firmware reset or not. 94 * Asynchronous firmware notifications can declare themselves as dependent on a 95 * certain instance of those resources and that means that the notifications 96 * will be cancelled once the instance is destroyed. 97 */ 98 99 #define IWL_MLD_MAX_ADDRESSES 5 100 101 /** 102 * struct iwl_mld - MLD op mode 103 * 104 * @fw_id_to_bss_conf: maps a fw id of a link to the corresponding 105 * ieee80211_bss_conf. 106 * @fw_id_to_vif: maps a fw id of a MAC context to the corresponding 107 * ieee80211_vif. Mapping is valid only when the MAC exists in the fw. 108 * @fw_id_to_txq: maps a fw id of a txq to the corresponding 109 * ieee80211_txq. 110 * @used_phy_ids: a bitmap of the phy IDs used. If a bit is set, it means 111 * that the index of this bit is already used as a PHY id. 112 * @num_igtks: the number if iGTKs that were sent to the FW. 113 * @monitor: monitor related data 114 * @monitor.on: does a monitor vif exist (singleton hence bool) 115 * @monitor.ampdu_ref: the id of the A-MPDU for sniffer 116 * @monitor.ampdu_toggle: the state of the previous packet to track A-MPDU 117 * @monitor.cur_aid: current association id tracked by the sniffer 118 * @monitor.cur_bssid: current bssid tracked by the sniffer 119 * @monitor.p80: primary channel position relative to he whole bandwidth, in 120 * steps of 80 MHz 121 * @fw_id_to_link_sta: maps a fw id of a sta to the corresponding 122 * ieee80211_link_sta. This is not cleaned up on restart since we want to 123 * preserve the fw sta ids during a restart (for SN/PN restoring). 124 * FW ids of internal stations will be mapped to ERR_PTR, and will be 125 * re-allocated during a restart, so make sure to free it in restart 126 * cleanup using iwl_mld_free_internal_sta 127 * @netdetect: indicates the FW is in suspend mode with netdetect configured 128 * @p2p_device_vif: points to the p2p device vif if exists 129 * @bt_is_active: indicates that BT is active 130 * @dev: pointer to device struct. For printing purposes 131 * @trans: pointer to the transport layer 132 * @cfg: pointer to the device configuration 133 * @fw: a pointer to the fw object 134 * @hw: pointer to the hw object. 135 * @wiphy: a pointer to the wiphy struct, for easier access to it. 136 * @nvm_data: pointer to the nvm_data that includes all our capabilities 137 * @fwrt: fw runtime data 138 * @debugfs_dir: debugfs directory 139 * @notif_wait: notification wait related data. 140 * @async_handlers_list: a list of all async RX handlers. When a notifciation 141 * with an async handler is received, it is added to this list. 142 * When &async_handlers_wk runs - it runs these handlers one by one. 143 * @async_handlers_lock: a lock for &async_handlers_list. Sync 144 * &async_handlers_wk and RX notifcation path. 145 * @async_handlers_wk: A work to run all async RX handlers from 146 * &async_handlers_list. 147 * @ct_kill_exit_wk: worker to exit thermal kill 148 * @fw_status: bitmap of fw status bits 149 * @running: true if the firmware is running 150 * @do_not_dump_once: true if firmware dump must be prevented once 151 * @in_d3: indicates FW is in suspend mode and should be resumed 152 * @in_hw_restart: indicates that we are currently in restart flow. 153 * rather than restarted. Should be unset upon restart. 154 * @radio_kill: bitmap of radio kill status 155 * @radio_kill.hw: radio is killed by hw switch 156 * @radio_kill.ct: radio is killed because the device it too hot 157 * @addresses: device MAC addresses. 158 * @scan: instance of the scan object 159 * @wowlan: WoWLAN support data. 160 * @led: the led device 161 * @mcc_src: the source id of the MCC, comes from the firmware 162 * @bios_enable_puncturing: is puncturing enabled by bios 163 * @fw_id_to_ba: maps a fw (BA) id to a corresponding Block Ack session data. 164 * @num_rx_ba_sessions: tracks the number of active Rx Block Ack (BA) sessions. 165 * the driver ensures that new BA sessions are blocked once the maximum 166 * supported by the firmware is reached, preventing firmware asserts. 167 * @rxq_sync: manages RX queue sync state 168 * @txqs_to_add: a list of &ieee80211_txq's to allocate in &add_txqs_wk 169 * @add_txqs_wk: a worker to allocate txqs. 170 * @add_txqs_lock: to lock the &txqs_to_add list. 171 * @error_recovery_buf: pointer to the recovery buffer that will be read 172 * from firmware upon fw/hw error and sent back to the firmware in 173 * reconfig flow (after NIC reset). 174 * @mcast_filter_cmd: pointer to the multicast filter command. 175 * @mgmt_tx_ant: stores the last TX antenna index; used for setting 176 * TX rate_n_flags for non-STA mgmt frames (toggles on every TX failure). 177 * @low_latency: low-latency manager. 178 * @tzone: thermal zone device's data 179 * @cooling_dev: cooling device's related data 180 * @ibss_manager: in IBSS mode (only one vif can be active), indicates what 181 * firmware indicated about having transmitted the last beacon, i.e. 182 * being IBSS manager for that time and needing to respond to probe 183 * requests 184 * @ptp_data: data of the PTP clock 185 * @time_sync: time sync data. 186 * @ftm_initiator: FTM initiator data 187 */ 188 struct iwl_mld { 189 /* Add here fields that need clean up on restart */ 190 struct_group(zeroed_on_hw_restart, 191 struct ieee80211_bss_conf __rcu *fw_id_to_bss_conf[IWL_FW_MAX_LINK_ID + 1]; 192 struct ieee80211_vif __rcu *fw_id_to_vif[NUM_MAC_INDEX_DRIVER]; 193 struct ieee80211_txq __rcu *fw_id_to_txq[IWL_MAX_TVQM_QUEUES]; 194 u8 used_phy_ids: NUM_PHY_CTX; 195 u8 num_igtks; 196 struct { 197 bool on; 198 u32 ampdu_ref; 199 bool ampdu_toggle; 200 u8 p80; 201 #ifdef CONFIG_IWLWIFI_DEBUGFS 202 __le16 cur_aid; 203 u8 cur_bssid[ETH_ALEN]; 204 #endif 205 } monitor; 206 #ifdef CONFIG_PM_SLEEP 207 bool netdetect; 208 #endif /* CONFIG_PM_SLEEP */ 209 struct ieee80211_vif *p2p_device_vif; 210 bool bt_is_active; 211 ); 212 struct ieee80211_link_sta __rcu *fw_id_to_link_sta[IWL_STATION_COUNT_MAX]; 213 /* And here fields that survive a fw restart */ 214 struct device *dev; 215 struct iwl_trans *trans; 216 const struct iwl_cfg *cfg; 217 const struct iwl_fw *fw; 218 struct ieee80211_hw *hw; 219 struct wiphy *wiphy; 220 struct iwl_nvm_data *nvm_data; 221 struct iwl_fw_runtime fwrt; 222 struct dentry *debugfs_dir; 223 struct iwl_notif_wait_data notif_wait; 224 struct list_head async_handlers_list; 225 spinlock_t async_handlers_lock; 226 struct wiphy_work async_handlers_wk; 227 struct wiphy_delayed_work ct_kill_exit_wk; 228 229 struct { 230 u32 running:1, 231 do_not_dump_once:1, 232 #ifdef CONFIG_PM_SLEEP 233 in_d3:1, 234 #endif 235 in_hw_restart:1; 236 237 } fw_status; 238 239 struct { 240 u32 hw:1, 241 ct:1; 242 } radio_kill; 243 244 struct mac_address addresses[IWL_MLD_MAX_ADDRESSES]; 245 struct iwl_mld_scan scan; 246 #ifdef CONFIG_PM_SLEEP 247 struct wiphy_wowlan_support wowlan; 248 #endif /* CONFIG_PM_SLEEP */ 249 #ifdef CONFIG_IWLWIFI_LEDS 250 struct led_classdev led; 251 #endif 252 enum iwl_mcc_source mcc_src; 253 bool bios_enable_puncturing; 254 255 struct iwl_mld_baid_data __rcu *fw_id_to_ba[IWL_MAX_BAID]; 256 u8 num_rx_ba_sessions; 257 258 struct iwl_mld_rx_queues_sync rxq_sync; 259 260 struct list_head txqs_to_add; 261 struct wiphy_work add_txqs_wk; 262 spinlock_t add_txqs_lock; 263 264 u8 *error_recovery_buf; 265 struct iwl_mcast_filter_cmd *mcast_filter_cmd; 266 267 u8 mgmt_tx_ant; 268 269 struct iwl_mld_low_latency low_latency; 270 271 bool ibss_manager; 272 #ifdef CONFIG_THERMAL 273 struct thermal_zone_device *tzone; 274 struct iwl_mld_cooling_device cooling_dev; 275 #endif 276 277 struct ptp_data ptp_data; 278 279 struct iwl_mld_time_sync_data __rcu *time_sync; 280 281 struct ftm_initiator_data ftm_initiator; 282 }; 283 284 /* memset the part of the struct that requires cleanup on restart */ 285 #define CLEANUP_STRUCT(_ptr) \ 286 memset((void *)&(_ptr)->zeroed_on_hw_restart, 0, \ 287 sizeof((_ptr)->zeroed_on_hw_restart)) 288 289 /* Cleanup function for struct iwl_mld_vif, will be called in restart */ 290 static inline void 291 iwl_cleanup_mld(struct iwl_mld *mld) 292 { 293 CLEANUP_STRUCT(mld); 294 CLEANUP_STRUCT(&mld->scan); 295 296 #ifdef CONFIG_PM_SLEEP 297 mld->fw_status.in_d3 = false; 298 #endif 299 300 iwl_mld_low_latency_restart_cleanup(mld); 301 } 302 303 enum iwl_power_scheme { 304 IWL_POWER_SCHEME_CAM = 1, 305 IWL_POWER_SCHEME_BPS, 306 }; 307 308 /** 309 * struct iwl_mld_mod_params - module parameters for iwlmld 310 * @power_scheme: one of enum iwl_power_scheme 311 */ 312 struct iwl_mld_mod_params { 313 int power_scheme; 314 }; 315 316 extern struct iwl_mld_mod_params iwlmld_mod_params; 317 318 /* Extract MLD priv from op_mode */ 319 #define IWL_OP_MODE_GET_MLD(_iwl_op_mode) \ 320 ((struct iwl_mld *)(_iwl_op_mode)->op_mode_specific) 321 322 #define IWL_MAC80211_GET_MLD(_hw) \ 323 IWL_OP_MODE_GET_MLD((struct iwl_op_mode *)((_hw)->priv)) 324 325 #ifdef CONFIG_IWLWIFI_DEBUGFS 326 void 327 iwl_mld_add_debugfs_files(struct iwl_mld *mld, struct dentry *debugfs_dir); 328 #else 329 static inline void 330 iwl_mld_add_debugfs_files(struct iwl_mld *mld, struct dentry *debugfs_dir) 331 {} 332 #endif 333 334 int iwl_mld_load_fw(struct iwl_mld *mld); 335 void iwl_mld_stop_fw(struct iwl_mld *mld); 336 int iwl_mld_start_fw(struct iwl_mld *mld); 337 void iwl_mld_send_recovery_cmd(struct iwl_mld *mld, u32 flags); 338 339 static inline void iwl_mld_set_ctkill(struct iwl_mld *mld, bool state) 340 { 341 mld->radio_kill.ct = state; 342 343 wiphy_rfkill_set_hw_state(mld->wiphy, 344 mld->radio_kill.hw || mld->radio_kill.ct); 345 } 346 347 static inline void iwl_mld_set_hwkill(struct iwl_mld *mld, bool state) 348 { 349 mld->radio_kill.hw = state; 350 351 wiphy_rfkill_set_hw_state(mld->wiphy, 352 mld->radio_kill.hw || mld->radio_kill.ct); 353 } 354 355 static inline u8 iwl_mld_get_valid_tx_ant(const struct iwl_mld *mld) 356 { 357 u8 tx_ant = mld->fw->valid_tx_ant; 358 359 if (mld->nvm_data && mld->nvm_data->valid_tx_ant) 360 tx_ant &= mld->nvm_data->valid_tx_ant; 361 362 return tx_ant; 363 } 364 365 static inline u8 iwl_mld_get_valid_rx_ant(const struct iwl_mld *mld) 366 { 367 u8 rx_ant = mld->fw->valid_rx_ant; 368 369 if (mld->nvm_data && mld->nvm_data->valid_rx_ant) 370 rx_ant &= mld->nvm_data->valid_rx_ant; 371 372 return rx_ant; 373 } 374 375 static inline u8 iwl_mld_nl80211_band_to_fw(enum nl80211_band band) 376 { 377 switch (band) { 378 case NL80211_BAND_2GHZ: 379 return PHY_BAND_24; 380 case NL80211_BAND_5GHZ: 381 return PHY_BAND_5; 382 case NL80211_BAND_6GHZ: 383 return PHY_BAND_6; 384 default: 385 WARN_ONCE(1, "Unsupported band (%u)\n", band); 386 return PHY_BAND_5; 387 } 388 } 389 390 static inline u8 iwl_mld_phy_band_to_nl80211(u8 phy_band) 391 { 392 switch (phy_band) { 393 case PHY_BAND_24: 394 return NL80211_BAND_2GHZ; 395 case PHY_BAND_5: 396 return NL80211_BAND_5GHZ; 397 case PHY_BAND_6: 398 return NL80211_BAND_6GHZ; 399 default: 400 WARN_ONCE(1, "Unsupported phy band (%u)\n", phy_band); 401 return NL80211_BAND_5GHZ; 402 } 403 } 404 405 static inline int 406 iwl_mld_legacy_hw_idx_to_mac80211_idx(u32 rate_n_flags, 407 enum nl80211_band band) 408 { 409 int format = rate_n_flags & RATE_MCS_MOD_TYPE_MSK; 410 int rate = rate_n_flags & RATE_LEGACY_RATE_MSK; 411 bool is_lb = band == NL80211_BAND_2GHZ; 412 413 if (format == RATE_MCS_LEGACY_OFDM_MSK) 414 return is_lb ? rate + IWL_FIRST_OFDM_RATE : rate; 415 416 /* CCK is not allowed in 5 GHz */ 417 return is_lb ? rate : -1; 418 } 419 420 extern const struct ieee80211_ops iwl_mld_hw_ops; 421 422 /** 423 * enum iwl_rx_handler_context: context for Rx handler 424 * @RX_HANDLER_SYNC: this means that it will be called in the Rx path 425 * which can't acquire the wiphy->mutex. 426 * @RX_HANDLER_ASYNC: If the handler needs to hold wiphy->mutex 427 * (and only in this case!), it should be set as ASYNC. In that case, 428 * it will be called from a worker with wiphy->mutex held. 429 */ 430 enum iwl_rx_handler_context { 431 RX_HANDLER_SYNC, 432 RX_HANDLER_ASYNC, 433 }; 434 435 /** 436 * struct iwl_rx_handler: handler for FW notification 437 * @val_fn: input validation function. 438 * @sizes: an array that mapps a version to the expected size. 439 * @fn: the function is called when notification is handled 440 * @cmd_id: command id 441 * @n_sizes: number of elements in &sizes. 442 * @context: see &iwl_rx_handler_context 443 * @obj_type: the type of the object that this handler is related to. 444 * See &iwl_mld_object_type. Use IWL_MLD_OBJECT_TYPE_NONE if not related. 445 * @cancel: function to cancel the notification. valid only if obj_type is not 446 * IWL_MLD_OBJECT_TYPE_NONE. 447 */ 448 struct iwl_rx_handler { 449 union { 450 bool (*val_fn)(struct iwl_mld *mld, struct iwl_rx_packet *pkt); 451 const struct iwl_notif_struct_size *sizes; 452 }; 453 void (*fn)(struct iwl_mld *mld, struct iwl_rx_packet *pkt); 454 u16 cmd_id; 455 u8 n_sizes; 456 u8 context; 457 enum iwl_mld_object_type obj_type; 458 bool (*cancel)(struct iwl_mld *mld, struct iwl_rx_packet *pkt, 459 u32 obj_id); 460 }; 461 462 /** 463 * struct iwl_notif_struct_size: map a notif ver to the expected size 464 * 465 * @size: the size to expect 466 * @ver: the version of the notification 467 */ 468 struct iwl_notif_struct_size { 469 u32 size:24, ver:8; 470 }; 471 472 #if IS_ENABLED(CONFIG_IWLWIFI_KUNIT_TESTS) 473 extern const struct iwl_hcmd_arr iwl_mld_groups[]; 474 extern const unsigned int global_iwl_mld_goups_size; 475 extern const struct iwl_rx_handler iwl_mld_rx_handlers[]; 476 extern const unsigned int iwl_mld_rx_handlers_num; 477 478 bool 479 iwl_mld_is_dup(struct iwl_mld *mld, struct ieee80211_sta *sta, 480 struct ieee80211_hdr *hdr, 481 const struct iwl_rx_mpdu_desc *mpdu_desc, 482 struct ieee80211_rx_status *rx_status, int queue); 483 484 void iwl_construct_mld(struct iwl_mld *mld, struct iwl_trans *trans, 485 const struct iwl_cfg *cfg, const struct iwl_fw *fw, 486 struct ieee80211_hw *hw, struct dentry *dbgfs_dir); 487 #endif 488 489 #define IWL_MLD_INVALID_FW_ID 0xff 490 491 #define IWL_MLD_ALLOC_FN(_type, _mac80211_type) \ 492 static int \ 493 iwl_mld_allocate_##_type##_fw_id(struct iwl_mld *mld, \ 494 u8 *fw_id, \ 495 struct ieee80211_##_mac80211_type *mac80211_ptr) \ 496 { \ 497 u8 rand = IWL_MLD_DIS_RANDOM_FW_ID ? 0 : get_random_u8(); \ 498 u8 arr_sz = ARRAY_SIZE(mld->fw_id_to_##_mac80211_type); \ 499 if (__builtin_types_compatible_p(typeof(*mac80211_ptr), \ 500 struct ieee80211_link_sta)) \ 501 arr_sz = mld->fw->ucode_capa.num_stations; \ 502 if (__builtin_types_compatible_p(typeof(*mac80211_ptr), \ 503 struct ieee80211_bss_conf)) \ 504 arr_sz = mld->fw->ucode_capa.num_links; \ 505 for (int i = 0; i < arr_sz; i++) { \ 506 u8 idx = (i + rand) % arr_sz; \ 507 if (rcu_access_pointer(mld->fw_id_to_##_mac80211_type[idx])) \ 508 continue; \ 509 IWL_DEBUG_INFO(mld, "Allocated at index %d / %d\n", idx, arr_sz); \ 510 *fw_id = idx; \ 511 rcu_assign_pointer(mld->fw_id_to_##_mac80211_type[idx], mac80211_ptr); \ 512 return 0; \ 513 } \ 514 return -ENOSPC; \ 515 } 516 517 static inline struct ieee80211_bss_conf * 518 iwl_mld_fw_id_to_link_conf(struct iwl_mld *mld, u8 fw_link_id) 519 { 520 if (IWL_FW_CHECK(mld, fw_link_id >= mld->fw->ucode_capa.num_links, 521 "Invalid fw_link_id: %d\n", fw_link_id)) 522 return NULL; 523 524 return wiphy_dereference(mld->wiphy, 525 mld->fw_id_to_bss_conf[fw_link_id]); 526 } 527 528 #define MSEC_TO_TU(_msec) ((_msec) * 1000 / 1024) 529 530 void iwl_mld_add_vif_debugfs(struct ieee80211_hw *hw, 531 struct ieee80211_vif *vif); 532 void iwl_mld_add_link_debugfs(struct ieee80211_hw *hw, 533 struct ieee80211_vif *vif, 534 struct ieee80211_bss_conf *link_conf, 535 struct dentry *dir); 536 void iwl_mld_add_link_sta_debugfs(struct ieee80211_hw *hw, 537 struct ieee80211_vif *vif, 538 struct ieee80211_link_sta *link_sta, 539 struct dentry *dir); 540 541 /* Utilities */ 542 543 static inline u8 iwl_mld_mac80211_ac_to_fw_tx_fifo(enum ieee80211_ac_numbers ac) 544 { 545 static const u8 mac80211_ac_to_fw_tx_fifo[] = { 546 IWL_BZ_EDCA_TX_FIFO_VO, 547 IWL_BZ_EDCA_TX_FIFO_VI, 548 IWL_BZ_EDCA_TX_FIFO_BE, 549 IWL_BZ_EDCA_TX_FIFO_BK, 550 IWL_BZ_TRIG_TX_FIFO_VO, 551 IWL_BZ_TRIG_TX_FIFO_VI, 552 IWL_BZ_TRIG_TX_FIFO_BE, 553 IWL_BZ_TRIG_TX_FIFO_BK, 554 }; 555 return mac80211_ac_to_fw_tx_fifo[ac]; 556 } 557 558 static inline u32 559 iwl_mld_get_lmac_id(struct iwl_mld *mld, enum nl80211_band band) 560 { 561 if (!fw_has_capa(&mld->fw->ucode_capa, 562 IWL_UCODE_TLV_CAPA_CDB_SUPPORT) || 563 band == NL80211_BAND_2GHZ) 564 return IWL_LMAC_24G_INDEX; 565 return IWL_LMAC_5G_INDEX; 566 } 567 568 /* Check if we had an error, but reconfig flow didn't start yet */ 569 static inline bool iwl_mld_error_before_recovery(struct iwl_mld *mld) 570 { 571 return mld->fw_status.in_hw_restart && 572 !iwl_trans_fw_running(mld->trans); 573 } 574 575 int iwl_mld_tdls_sta_count(struct iwl_mld *mld); 576 577 #endif /* __iwl_mld_h__ */ 578