1 /****************************************************************************** 2 * 3 * This file is provided under a dual BSD/GPLv2 license. When using or 4 * redistributing this file, you may do so under either license. 5 * 6 * GPL LICENSE SUMMARY 7 * 8 * Copyright(c) 2007 - 2014 Intel Corporation. All rights reserved. 9 * Copyright(c) 2013 - 2014 Intel Mobile Communications GmbH 10 * Copyright(c) 2015 Intel Deutschland GmbH 11 * 12 * This program is free software; you can redistribute it and/or modify 13 * it under the terms of version 2 of the GNU General Public License as 14 * published by the Free Software Foundation. 15 * 16 * This program is distributed in the hope that it will be useful, but 17 * WITHOUT ANY WARRANTY; without even the implied warranty of 18 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU 19 * General Public License for more details. 20 * 21 * You should have received a copy of the GNU General Public License 22 * along with this program; if not, write to the Free Software 23 * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110, 24 * USA 25 * 26 * The full GNU General Public License is included in this distribution 27 * in the file called COPYING. 28 * 29 * Contact Information: 30 * Intel Linux Wireless <linuxwifi@intel.com> 31 * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 32 * 33 * BSD LICENSE 34 * 35 * Copyright(c) 2005 - 2014 Intel Corporation. All rights reserved. 36 * Copyright(c) 2013 - 2014 Intel Mobile Communications GmbH 37 * Copyright(c) 2015 Intel Deutschland GmbH 38 * All rights reserved. 39 * 40 * Redistribution and use in source and binary forms, with or without 41 * modification, are permitted provided that the following conditions 42 * are met: 43 * 44 * * Redistributions of source code must retain the above copyright 45 * notice, this list of conditions and the following disclaimer. 46 * * Redistributions in binary form must reproduce the above copyright 47 * notice, this list of conditions and the following disclaimer in 48 * the documentation and/or other materials provided with the 49 * distribution. 50 * * Neither the name Intel Corporation nor the names of its 51 * contributors may be used to endorse or promote products derived 52 * from this software without specific prior written permission. 53 * 54 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS 55 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT 56 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR 57 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT 58 * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, 59 * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT 60 * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, 61 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY 62 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 63 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE 64 * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 65 * 66 *****************************************************************************/ 67 #ifndef __iwl_op_mode_h__ 68 #define __iwl_op_mode_h__ 69 70 #include <linux/netdevice.h> 71 #include <linux/debugfs.h> 72 73 struct iwl_op_mode; 74 struct iwl_trans; 75 struct sk_buff; 76 struct iwl_device_cmd; 77 struct iwl_rx_cmd_buffer; 78 struct iwl_fw; 79 struct iwl_cfg; 80 81 /** 82 * DOC: Operational mode - what is it ? 83 * 84 * The operational mode (a.k.a. op_mode) is the layer that implements 85 * mac80211's handlers. It knows two APIs: mac80211's and the fw's. It uses 86 * the transport API to access the HW. The op_mode doesn't need to know how the 87 * underlying HW works, since the transport layer takes care of that. 88 * 89 * There can be several op_mode: i.e. different fw APIs will require two 90 * different op_modes. This is why the op_mode is virtualized. 91 */ 92 93 /** 94 * DOC: Life cycle of the Operational mode 95 * 96 * The operational mode has a very simple life cycle. 97 * 98 * 1) The driver layer (iwl-drv.c) chooses the op_mode based on the 99 * capabilities advertised by the fw file (in TLV format). 100 * 2) The driver layer starts the op_mode (ops->start) 101 * 3) The op_mode registers mac80211 102 * 4) The op_mode is governed by mac80211 103 * 5) The driver layer stops the op_mode 104 */ 105 106 /** 107 * struct iwl_op_mode_ops - op_mode specific operations 108 * 109 * The op_mode exports its ops so that external components can start it and 110 * interact with it. The driver layer typically calls the start and stop 111 * handlers, the transport layer calls the others. 112 * 113 * All the handlers MUST be implemented, except @rx_rss which can be left 114 * out *iff* the opmode will never run on hardware with multi-queue capability. 115 * 116 * @start: start the op_mode. The transport layer is already allocated. 117 * May sleep 118 * @stop: stop the op_mode. Must free all the memory allocated. 119 * May sleep 120 * @rx: Rx notification to the op_mode. rxb is the Rx buffer itself. Cmd is the 121 * HCMD this Rx responds to. Can't sleep. 122 * @rx_rss: data queue RX notification to the op_mode, for (data) notifications 123 * received on the RSS queue(s). The queue parameter indicates which of the 124 * RSS queues received this frame; it will always be non-zero. 125 * This method must not sleep. 126 * @async_cb: called when an ASYNC command with CMD_WANT_ASYNC_CALLBACK set 127 * completes. Must be atomic. 128 * @queue_full: notifies that a HW queue is full. 129 * Must be atomic and called with BH disabled. 130 * @queue_not_full: notifies that a HW queue is not full any more. 131 * Must be atomic and called with BH disabled. 132 * @hw_rf_kill:notifies of a change in the HW rf kill switch. True means that 133 * the radio is killed. Return %true if the device should be stopped by 134 * the transport immediately after the call. May sleep. 135 * @free_skb: allows the transport layer to free skbs that haven't been 136 * reclaimed by the op_mode. This can happen when the driver is freed and 137 * there are Tx packets pending in the transport layer. 138 * Must be atomic 139 * @nic_error: error notification. Must be atomic and must be called with BH 140 * disabled. 141 * @cmd_queue_full: Called when the command queue gets full. Must be atomic and 142 * called with BH disabled. 143 * @nic_config: configure NIC, called before firmware is started. 144 * May sleep 145 * @wimax_active: invoked when WiMax becomes active. May sleep 146 * @enter_d0i3: configure the fw to enter d0i3. return 1 to indicate d0i3 147 * entrance is aborted (e.g. due to held reference). May sleep. 148 * @exit_d0i3: configure the fw to exit d0i3. May sleep. 149 */ 150 struct iwl_op_mode_ops { 151 struct iwl_op_mode *(*start)(struct iwl_trans *trans, 152 const struct iwl_cfg *cfg, 153 const struct iwl_fw *fw, 154 struct dentry *dbgfs_dir); 155 void (*stop)(struct iwl_op_mode *op_mode); 156 void (*rx)(struct iwl_op_mode *op_mode, struct napi_struct *napi, 157 struct iwl_rx_cmd_buffer *rxb); 158 void (*rx_rss)(struct iwl_op_mode *op_mode, struct napi_struct *napi, 159 struct iwl_rx_cmd_buffer *rxb, unsigned int queue); 160 void (*async_cb)(struct iwl_op_mode *op_mode, 161 const struct iwl_device_cmd *cmd); 162 void (*queue_full)(struct iwl_op_mode *op_mode, int queue); 163 void (*queue_not_full)(struct iwl_op_mode *op_mode, int queue); 164 bool (*hw_rf_kill)(struct iwl_op_mode *op_mode, bool state); 165 void (*free_skb)(struct iwl_op_mode *op_mode, struct sk_buff *skb); 166 void (*nic_error)(struct iwl_op_mode *op_mode); 167 void (*cmd_queue_full)(struct iwl_op_mode *op_mode); 168 void (*nic_config)(struct iwl_op_mode *op_mode); 169 void (*wimax_active)(struct iwl_op_mode *op_mode); 170 int (*enter_d0i3)(struct iwl_op_mode *op_mode); 171 int (*exit_d0i3)(struct iwl_op_mode *op_mode); 172 }; 173 174 int iwl_opmode_register(const char *name, const struct iwl_op_mode_ops *ops); 175 void iwl_opmode_deregister(const char *name); 176 177 /** 178 * struct iwl_op_mode - operational mode 179 * @ops: pointer to its own ops 180 * 181 * This holds an implementation of the mac80211 / fw API. 182 */ 183 struct iwl_op_mode { 184 const struct iwl_op_mode_ops *ops; 185 186 char op_mode_specific[0] __aligned(sizeof(void *)); 187 }; 188 189 static inline void iwl_op_mode_stop(struct iwl_op_mode *op_mode) 190 { 191 might_sleep(); 192 op_mode->ops->stop(op_mode); 193 } 194 195 static inline void iwl_op_mode_rx(struct iwl_op_mode *op_mode, 196 struct napi_struct *napi, 197 struct iwl_rx_cmd_buffer *rxb) 198 { 199 return op_mode->ops->rx(op_mode, napi, rxb); 200 } 201 202 static inline void iwl_op_mode_rx_rss(struct iwl_op_mode *op_mode, 203 struct napi_struct *napi, 204 struct iwl_rx_cmd_buffer *rxb, 205 unsigned int queue) 206 { 207 op_mode->ops->rx_rss(op_mode, napi, rxb, queue); 208 } 209 210 static inline void iwl_op_mode_async_cb(struct iwl_op_mode *op_mode, 211 const struct iwl_device_cmd *cmd) 212 { 213 if (op_mode->ops->async_cb) 214 op_mode->ops->async_cb(op_mode, cmd); 215 } 216 217 static inline void iwl_op_mode_queue_full(struct iwl_op_mode *op_mode, 218 int queue) 219 { 220 op_mode->ops->queue_full(op_mode, queue); 221 } 222 223 static inline void iwl_op_mode_queue_not_full(struct iwl_op_mode *op_mode, 224 int queue) 225 { 226 op_mode->ops->queue_not_full(op_mode, queue); 227 } 228 229 static inline bool __must_check 230 iwl_op_mode_hw_rf_kill(struct iwl_op_mode *op_mode, bool state) 231 { 232 might_sleep(); 233 return op_mode->ops->hw_rf_kill(op_mode, state); 234 } 235 236 static inline void iwl_op_mode_free_skb(struct iwl_op_mode *op_mode, 237 struct sk_buff *skb) 238 { 239 op_mode->ops->free_skb(op_mode, skb); 240 } 241 242 static inline void iwl_op_mode_nic_error(struct iwl_op_mode *op_mode) 243 { 244 op_mode->ops->nic_error(op_mode); 245 } 246 247 static inline void iwl_op_mode_cmd_queue_full(struct iwl_op_mode *op_mode) 248 { 249 op_mode->ops->cmd_queue_full(op_mode); 250 } 251 252 static inline void iwl_op_mode_nic_config(struct iwl_op_mode *op_mode) 253 { 254 might_sleep(); 255 op_mode->ops->nic_config(op_mode); 256 } 257 258 static inline void iwl_op_mode_wimax_active(struct iwl_op_mode *op_mode) 259 { 260 might_sleep(); 261 op_mode->ops->wimax_active(op_mode); 262 } 263 264 static inline int iwl_op_mode_enter_d0i3(struct iwl_op_mode *op_mode) 265 { 266 might_sleep(); 267 268 if (!op_mode->ops->enter_d0i3) 269 return 0; 270 return op_mode->ops->enter_d0i3(op_mode); 271 } 272 273 static inline int iwl_op_mode_exit_d0i3(struct iwl_op_mode *op_mode) 274 { 275 might_sleep(); 276 277 if (!op_mode->ops->exit_d0i3) 278 return 0; 279 return op_mode->ops->exit_d0i3(op_mode); 280 } 281 282 #endif /* __iwl_op_mode_h__ */ 283