1 /* SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause */ 2 /* 3 * Copyright (C) 2012-2014, 2018-2022 Intel Corporation 4 * Copyright (C) 2016-2017 Intel Deutschland GmbH 5 */ 6 #ifndef __iwl_fw_api_tx_h__ 7 #define __iwl_fw_api_tx_h__ 8 #include <linux/ieee80211.h> 9 10 /** 11 * enum iwl_tx_flags - bitmasks for tx_flags in TX command 12 * @TX_CMD_FLG_PROT_REQUIRE: use RTS or CTS-to-self to protect the frame 13 * @TX_CMD_FLG_WRITE_TX_POWER: update current tx power value in the mgmt frame 14 * @TX_CMD_FLG_ACK: expect ACK from receiving station 15 * @TX_CMD_FLG_STA_RATE: use RS table with initial index from the TX command. 16 * Otherwise, use rate_n_flags from the TX command 17 * @TX_CMD_FLG_BAR: this frame is a BA request, immediate BAR is expected 18 * Must set TX_CMD_FLG_ACK with this flag. 19 * @TX_CMD_FLG_TXOP_PROT: TXOP protection requested 20 * @TX_CMD_FLG_VHT_NDPA: mark frame is NDPA for VHT beamformer sequence 21 * @TX_CMD_FLG_HT_NDPA: mark frame is NDPA for HT beamformer sequence 22 * @TX_CMD_FLG_CSI_FDBK2HOST: mark to send feedback to host (only if good CRC) 23 * @TX_CMD_FLG_BT_PRIO_MASK: BT priority value 24 * @TX_CMD_FLG_BT_PRIO_POS: the position of the BT priority (bit 11 is ignored 25 * on old firmwares). 26 * @TX_CMD_FLG_BT_DIS: disable BT priority for this frame 27 * @TX_CMD_FLG_SEQ_CTL: set if FW should override the sequence control. 28 * Should be set for mgmt, non-QOS data, mcast, bcast and in scan command 29 * @TX_CMD_FLG_MORE_FRAG: this frame is non-last MPDU 30 * @TX_CMD_FLG_TSF: FW should calculate and insert TSF in the frame 31 * Should be set for beacons and probe responses 32 * @TX_CMD_FLG_CALIB: activate PA TX power calibrations 33 * @TX_CMD_FLG_KEEP_SEQ_CTL: if seq_ctl is set, don't increase inner seq count 34 * @TX_CMD_FLG_MH_PAD: driver inserted 2 byte padding after MAC header. 35 * Should be set for 26/30 length MAC headers 36 * @TX_CMD_FLG_RESP_TO_DRV: zero this if the response should go only to FW 37 * @TX_CMD_FLG_TKIP_MIC_DONE: FW already performed TKIP MIC calculation 38 * @TX_CMD_FLG_DUR: disable duration overwriting used in PS-Poll Assoc-id 39 * @TX_CMD_FLG_FW_DROP: FW should mark frame to be dropped 40 * @TX_CMD_FLG_EXEC_PAPD: execute PAPD 41 * @TX_CMD_FLG_PAPD_TYPE: 0 for reference power, 1 for nominal power 42 * @TX_CMD_FLG_HCCA_CHUNK: mark start of TSPEC chunk 43 */ 44 enum iwl_tx_flags { 45 TX_CMD_FLG_PROT_REQUIRE = BIT(0), 46 TX_CMD_FLG_WRITE_TX_POWER = BIT(1), 47 TX_CMD_FLG_ACK = BIT(3), 48 TX_CMD_FLG_STA_RATE = BIT(4), 49 TX_CMD_FLG_BAR = BIT(6), 50 TX_CMD_FLG_TXOP_PROT = BIT(7), 51 TX_CMD_FLG_VHT_NDPA = BIT(8), 52 TX_CMD_FLG_HT_NDPA = BIT(9), 53 TX_CMD_FLG_CSI_FDBK2HOST = BIT(10), 54 TX_CMD_FLG_BT_PRIO_POS = 11, 55 TX_CMD_FLG_BT_PRIO_MASK = BIT(11) | BIT(12), 56 TX_CMD_FLG_BT_DIS = BIT(12), 57 TX_CMD_FLG_SEQ_CTL = BIT(13), 58 TX_CMD_FLG_MORE_FRAG = BIT(14), 59 TX_CMD_FLG_TSF = BIT(16), 60 TX_CMD_FLG_CALIB = BIT(17), 61 TX_CMD_FLG_KEEP_SEQ_CTL = BIT(18), 62 TX_CMD_FLG_MH_PAD = BIT(20), 63 TX_CMD_FLG_RESP_TO_DRV = BIT(21), 64 TX_CMD_FLG_TKIP_MIC_DONE = BIT(23), 65 TX_CMD_FLG_DUR = BIT(25), 66 TX_CMD_FLG_FW_DROP = BIT(26), 67 TX_CMD_FLG_EXEC_PAPD = BIT(27), 68 TX_CMD_FLG_PAPD_TYPE = BIT(28), 69 TX_CMD_FLG_HCCA_CHUNK = BIT(31) 70 }; /* TX_FLAGS_BITS_API_S_VER_1 */ 71 72 /** 73 * enum iwl_tx_cmd_flags - bitmasks for tx_flags in TX command for 22000 74 * @IWL_TX_FLAGS_CMD_RATE: use rate from the TX command 75 * @IWL_TX_FLAGS_ENCRYPT_DIS: frame should not be encrypted, even if it belongs 76 * to a secured STA 77 * @IWL_TX_FLAGS_HIGH_PRI: high priority frame (like EAPOL) - can affect rate 78 * selection, retry limits and BT kill 79 */ 80 enum iwl_tx_cmd_flags { 81 IWL_TX_FLAGS_CMD_RATE = BIT(0), 82 IWL_TX_FLAGS_ENCRYPT_DIS = BIT(1), 83 IWL_TX_FLAGS_HIGH_PRI = BIT(2), 84 /* Use these flags only from 85 * TX_FLAGS_BITS_API_S_VER_4 and above */ 86 IWL_TX_FLAGS_RTS = BIT(3), 87 IWL_TX_FLAGS_CTS = BIT(4), 88 }; /* TX_FLAGS_BITS_API_S_VER_3 */ 89 90 /** 91 * enum iwl_tx_pm_timeouts - pm timeout values in TX command 92 * @PM_FRAME_NONE: no need to suspend sleep mode 93 * @PM_FRAME_MGMT: fw suspend sleep mode for 100TU 94 * @PM_FRAME_ASSOC: fw suspend sleep mode for 10sec 95 */ 96 enum iwl_tx_pm_timeouts { 97 PM_FRAME_NONE = 0, 98 PM_FRAME_MGMT = 2, 99 PM_FRAME_ASSOC = 3, 100 }; 101 102 #define TX_CMD_SEC_MSK 0x07 103 #define TX_CMD_SEC_WEP_KEY_IDX_POS 6 104 #define TX_CMD_SEC_WEP_KEY_IDX_MSK 0xc0 105 106 /** 107 * enum iwl_tx_cmd_sec_ctrl - bitmasks for security control in TX command 108 * @TX_CMD_SEC_WEP: WEP encryption algorithm. 109 * @TX_CMD_SEC_CCM: CCM encryption algorithm. 110 * @TX_CMD_SEC_TKIP: TKIP encryption algorithm. 111 * @TX_CMD_SEC_EXT: extended cipher algorithm. 112 * @TX_CMD_SEC_GCMP: GCMP encryption algorithm. 113 * @TX_CMD_SEC_KEY128: set for 104 bits WEP key. 114 * @TX_CMD_SEC_KEY_FROM_TABLE: for a non-WEP key, set if the key should be taken 115 * from the table instead of from the TX command. 116 * If the key is taken from the key table its index should be given by the 117 * first byte of the TX command key field. 118 */ 119 enum iwl_tx_cmd_sec_ctrl { 120 TX_CMD_SEC_WEP = 0x01, 121 TX_CMD_SEC_CCM = 0x02, 122 TX_CMD_SEC_TKIP = 0x03, 123 TX_CMD_SEC_EXT = 0x04, 124 TX_CMD_SEC_GCMP = 0x05, 125 TX_CMD_SEC_KEY128 = 0x08, 126 TX_CMD_SEC_KEY_FROM_TABLE = 0x10, 127 }; 128 129 /* 130 * TX command Frame life time in us - to be written in pm_frame_timeout 131 */ 132 #define TX_CMD_LIFE_TIME_INFINITE 0xFFFFFFFF 133 #define TX_CMD_LIFE_TIME_DEFAULT 2000000 /* 2000 ms*/ 134 #define TX_CMD_LIFE_TIME_PROBE_RESP 40000 /* 40 ms */ 135 #define TX_CMD_LIFE_TIME_EXPIRED_FRAME 0 136 137 /* 138 * TID for non QoS frames - to be written in tid_tspec 139 */ 140 #define IWL_TID_NON_QOS 0 141 142 /* 143 * Limits on the retransmissions - to be written in {data,rts}_retry_limit 144 */ 145 #define IWL_DEFAULT_TX_RETRY 15 146 #define IWL_MGMT_DFAULT_RETRY_LIMIT 3 147 #define IWL_RTS_DFAULT_RETRY_LIMIT 60 148 #define IWL_BAR_DFAULT_RETRY_LIMIT 60 149 #define IWL_LOW_RETRY_LIMIT 7 150 151 /** 152 * enum iwl_tx_offload_assist_flags_pos - set %iwl_tx_cmd offload_assist values 153 * @TX_CMD_OFFLD_IP_HDR: offset to start of IP header (in words) 154 * from mac header end. For normal case it is 4 words for SNAP. 155 * note: tx_cmd, mac header and pad are not counted in the offset. 156 * This is used to help the offload in case there is tunneling such as 157 * IPv6 in IPv4, in such case the ip header offset should point to the 158 * inner ip header and IPv4 checksum of the external header should be 159 * calculated by driver. 160 * @TX_CMD_OFFLD_L4_EN: enable TCP/UDP checksum 161 * @TX_CMD_OFFLD_L3_EN: enable IP header checksum 162 * @TX_CMD_OFFLD_MH_SIZE: size of the mac header in words. Includes the IV 163 * field. Doesn't include the pad. 164 * @TX_CMD_OFFLD_PAD: mark 2-byte pad was inserted after the mac header for 165 * alignment 166 * @TX_CMD_OFFLD_AMSDU: mark TX command is A-MSDU 167 */ 168 enum iwl_tx_offload_assist_flags_pos { 169 TX_CMD_OFFLD_IP_HDR = 0, 170 TX_CMD_OFFLD_L4_EN = 6, 171 TX_CMD_OFFLD_L3_EN = 7, 172 TX_CMD_OFFLD_MH_SIZE = 8, 173 TX_CMD_OFFLD_PAD = 13, 174 TX_CMD_OFFLD_AMSDU = 14, 175 }; 176 177 #define IWL_TX_CMD_OFFLD_MH_MASK 0x1f 178 #define IWL_TX_CMD_OFFLD_IP_HDR_MASK 0x3f 179 180 enum iwl_tx_offload_assist_bz { 181 IWL_TX_CMD_OFFLD_BZ_RESULT_OFFS = 0x000003ff, 182 IWL_TX_CMD_OFFLD_BZ_START_OFFS = 0x001ff800, 183 IWL_TX_CMD_OFFLD_BZ_MH_LEN = 0x07c00000, 184 IWL_TX_CMD_OFFLD_BZ_MH_PAD = 0x08000000, 185 IWL_TX_CMD_OFFLD_BZ_AMSDU = 0x10000000, 186 IWL_TX_CMD_OFFLD_BZ_ZERO2ONES = 0x20000000, 187 IWL_TX_CMD_OFFLD_BZ_ENABLE_CSUM = 0x40000000, 188 IWL_TX_CMD_OFFLD_BZ_PARTIAL_CSUM = 0x80000000, 189 }; 190 191 /* TODO: complete documentation for try_cnt and btkill_cnt */ 192 /** 193 * struct iwl_tx_cmd - TX command struct to FW 194 * ( TX_CMD = 0x1c ) 195 * @len: in bytes of the payload, see below for details 196 * @offload_assist: TX offload configuration 197 * @tx_flags: combination of TX_CMD_FLG_*, see &enum iwl_tx_flags 198 * @scratch: scratch buffer used by the device 199 * @rate_n_flags: rate for *all* Tx attempts, if TX_CMD_FLG_STA_RATE_MSK is 200 * cleared. Combination of RATE_MCS_* 201 * @sta_id: index of destination station in FW station table 202 * @sec_ctl: security control, TX_CMD_SEC_* 203 * @initial_rate_index: index into the the rate table for initial TX attempt. 204 * Applied if TX_CMD_FLG_STA_RATE_MSK is set, normally 0 for data frames. 205 * @reserved2: reserved 206 * @key: security key 207 * @reserved3: reserved 208 * @life_time: frame life time (usecs??) 209 * @dram_lsb_ptr: Physical address of scratch area in the command (try_cnt + 210 * btkill_cnd + reserved), first 32 bits. "0" disables usage. 211 * @dram_msb_ptr: upper bits of the scratch physical address 212 * @rts_retry_limit: max attempts for RTS 213 * @data_retry_limit: max attempts to send the data packet 214 * @tid_tspec: TID/tspec 215 * @pm_frame_timeout: PM TX frame timeout 216 * @reserved4: reserved 217 * @payload: payload (same as @hdr) 218 * @hdr: 802.11 header (same as @payload) 219 * 220 * The byte count (both len and next_frame_len) includes MAC header 221 * (24/26/30/32 bytes) 222 * + 2 bytes pad if 26/30 header size 223 * + 8 byte IV for CCM or TKIP (not used for WEP) 224 * + Data payload 225 * + 8-byte MIC (not used for CCM/WEP) 226 * It does not include post-MAC padding, i.e., 227 * MIC (CCM) 8 bytes, ICV (WEP/TKIP/CKIP) 4 bytes, CRC 4 bytes. 228 * Range of len: 14-2342 bytes. 229 * 230 * After the struct fields the MAC header is placed, plus any padding, 231 * and then the actial payload. 232 */ 233 struct iwl_tx_cmd { 234 __le16 len; 235 __le16 offload_assist; 236 __le32 tx_flags; 237 struct { 238 u8 try_cnt; 239 u8 btkill_cnt; 240 __le16 reserved; 241 } scratch; /* DRAM_SCRATCH_API_U_VER_1 */ 242 __le32 rate_n_flags; 243 u8 sta_id; 244 u8 sec_ctl; 245 u8 initial_rate_index; 246 u8 reserved2; 247 u8 key[16]; 248 __le32 reserved3; 249 __le32 life_time; 250 __le32 dram_lsb_ptr; 251 u8 dram_msb_ptr; 252 u8 rts_retry_limit; 253 u8 data_retry_limit; 254 u8 tid_tspec; 255 __le16 pm_frame_timeout; 256 __le16 reserved4; 257 union { 258 DECLARE_FLEX_ARRAY(u8, payload); 259 DECLARE_FLEX_ARRAY(struct ieee80211_hdr, hdr); 260 }; 261 } __packed; /* TX_CMD_API_S_VER_6 */ 262 263 struct iwl_dram_sec_info { 264 __le32 pn_low; 265 __le16 pn_high; 266 __le16 aux_info; 267 } __packed; /* DRAM_SEC_INFO_API_S_VER_1 */ 268 269 /** 270 * struct iwl_tx_cmd_gen2 - TX command struct to FW for 22000 devices 271 * ( TX_CMD = 0x1c ) 272 * @len: in bytes of the payload, see below for details 273 * @offload_assist: TX offload configuration 274 * @flags: combination of &enum iwl_tx_cmd_flags 275 * @dram_info: FW internal DRAM storage 276 * @rate_n_flags: rate for *all* Tx attempts, if TX_CMD_FLG_STA_RATE_MSK is 277 * cleared. Combination of RATE_MCS_* 278 * @hdr: 802.11 header 279 */ 280 struct iwl_tx_cmd_gen2 { 281 __le16 len; 282 __le16 offload_assist; 283 __le32 flags; 284 struct iwl_dram_sec_info dram_info; 285 __le32 rate_n_flags; 286 struct ieee80211_hdr hdr[]; 287 } __packed; /* TX_CMD_API_S_VER_7, 288 TX_CMD_API_S_VER_9 */ 289 290 /** 291 * struct iwl_tx_cmd_gen3 - TX command struct to FW for AX210+ devices 292 * ( TX_CMD = 0x1c ) 293 * @len: in bytes of the payload, see below for details 294 * @flags: combination of &enum iwl_tx_cmd_flags 295 * @offload_assist: TX offload configuration 296 * @dram_info: FW internal DRAM storage 297 * @rate_n_flags: rate for *all* Tx attempts, if TX_CMD_FLG_STA_RATE_MSK is 298 * cleared. Combination of RATE_MCS_* 299 * @reserved: reserved 300 * @hdr: 802.11 header 301 */ 302 struct iwl_tx_cmd_gen3 { 303 __le16 len; 304 __le16 flags; 305 __le32 offload_assist; 306 struct iwl_dram_sec_info dram_info; 307 __le32 rate_n_flags; 308 u8 reserved[8]; 309 struct ieee80211_hdr hdr[]; 310 } __packed; /* TX_CMD_API_S_VER_8, 311 TX_CMD_API_S_VER_10 */ 312 313 /* 314 * TX response related data 315 */ 316 317 /* 318 * enum iwl_tx_status - status that is returned by the fw after attempts to Tx 319 * @TX_STATUS_SUCCESS: 320 * @TX_STATUS_DIRECT_DONE: 321 * @TX_STATUS_POSTPONE_DELAY: 322 * @TX_STATUS_POSTPONE_FEW_BYTES: 323 * @TX_STATUS_POSTPONE_BT_PRIO: 324 * @TX_STATUS_POSTPONE_QUIET_PERIOD: 325 * @TX_STATUS_POSTPONE_CALC_TTAK: 326 * @TX_STATUS_FAIL_INTERNAL_CROSSED_RETRY: 327 * @TX_STATUS_FAIL_SHORT_LIMIT: 328 * @TX_STATUS_FAIL_LONG_LIMIT: 329 * @TX_STATUS_FAIL_UNDERRUN: 330 * @TX_STATUS_FAIL_DRAIN_FLOW: 331 * @TX_STATUS_FAIL_RFKILL_FLUSH: 332 * @TX_STATUS_FAIL_LIFE_EXPIRE: 333 * @TX_STATUS_FAIL_DEST_PS: 334 * @TX_STATUS_FAIL_HOST_ABORTED: 335 * @TX_STATUS_FAIL_BT_RETRY: 336 * @TX_STATUS_FAIL_STA_INVALID: 337 * @TX_TATUS_FAIL_FRAG_DROPPED: 338 * @TX_STATUS_FAIL_TID_DISABLE: 339 * @TX_STATUS_FAIL_FIFO_FLUSHED: 340 * @TX_STATUS_FAIL_SMALL_CF_POLL: 341 * @TX_STATUS_FAIL_FW_DROP: 342 * @TX_STATUS_FAIL_STA_COLOR_MISMATCH: mismatch between color of Tx cmd and 343 * STA table 344 * @TX_FRAME_STATUS_INTERNAL_ABORT: 345 * @TX_MODE_MSK: 346 * @TX_MODE_NO_BURST: 347 * @TX_MODE_IN_BURST_SEQ: 348 * @TX_MODE_FIRST_IN_BURST: 349 * @TX_QUEUE_NUM_MSK: 350 * 351 * Valid only if frame_count =1 352 * TODO: complete documentation 353 */ 354 enum iwl_tx_status { 355 TX_STATUS_MSK = 0x000000ff, 356 TX_STATUS_SUCCESS = 0x01, 357 TX_STATUS_DIRECT_DONE = 0x02, 358 /* postpone TX */ 359 TX_STATUS_POSTPONE_DELAY = 0x40, 360 TX_STATUS_POSTPONE_FEW_BYTES = 0x41, 361 TX_STATUS_POSTPONE_BT_PRIO = 0x42, 362 TX_STATUS_POSTPONE_QUIET_PERIOD = 0x43, 363 TX_STATUS_POSTPONE_CALC_TTAK = 0x44, 364 /* abort TX */ 365 TX_STATUS_FAIL_INTERNAL_CROSSED_RETRY = 0x81, 366 TX_STATUS_FAIL_SHORT_LIMIT = 0x82, 367 TX_STATUS_FAIL_LONG_LIMIT = 0x83, 368 TX_STATUS_FAIL_UNDERRUN = 0x84, 369 TX_STATUS_FAIL_DRAIN_FLOW = 0x85, 370 TX_STATUS_FAIL_RFKILL_FLUSH = 0x86, 371 TX_STATUS_FAIL_LIFE_EXPIRE = 0x87, 372 TX_STATUS_FAIL_DEST_PS = 0x88, 373 TX_STATUS_FAIL_HOST_ABORTED = 0x89, 374 TX_STATUS_FAIL_BT_RETRY = 0x8a, 375 TX_STATUS_FAIL_STA_INVALID = 0x8b, 376 TX_STATUS_FAIL_FRAG_DROPPED = 0x8c, 377 TX_STATUS_FAIL_TID_DISABLE = 0x8d, 378 TX_STATUS_FAIL_FIFO_FLUSHED = 0x8e, 379 TX_STATUS_FAIL_SMALL_CF_POLL = 0x8f, 380 TX_STATUS_FAIL_FW_DROP = 0x90, 381 TX_STATUS_FAIL_STA_COLOR_MISMATCH = 0x91, 382 TX_STATUS_INTERNAL_ABORT = 0x92, 383 TX_MODE_MSK = 0x00000f00, 384 TX_MODE_NO_BURST = 0x00000000, 385 TX_MODE_IN_BURST_SEQ = 0x00000100, 386 TX_MODE_FIRST_IN_BURST = 0x00000200, 387 TX_QUEUE_NUM_MSK = 0x0001f000, 388 TX_NARROW_BW_MSK = 0x00060000, 389 TX_NARROW_BW_1DIV2 = 0x00020000, 390 TX_NARROW_BW_1DIV4 = 0x00040000, 391 TX_NARROW_BW_1DIV8 = 0x00060000, 392 }; 393 394 /* 395 * enum iwl_tx_agg_status - TX aggregation status 396 * @AGG_TX_STATE_STATUS_MSK: 397 * @AGG_TX_STATE_TRANSMITTED: 398 * @AGG_TX_STATE_UNDERRUN: 399 * @AGG_TX_STATE_BT_PRIO: 400 * @AGG_TX_STATE_FEW_BYTES: 401 * @AGG_TX_STATE_ABORT: 402 * @AGG_TX_STATE_TX_ON_AIR_DROP: TX_ON_AIR signal drop without underrun or 403 * BT detection 404 * @AGG_TX_STATE_LAST_SENT_TRY_CNT: 405 * @AGG_TX_STATE_LAST_SENT_BT_KILL: 406 * @AGG_TX_STATE_SCD_QUERY: 407 * @AGG_TX_STATE_TEST_BAD_CRC32: 408 * @AGG_TX_STATE_RESPONSE: 409 * @AGG_TX_STATE_DUMP_TX: 410 * @AGG_TX_STATE_DELAY_TX: 411 * @AGG_TX_STATE_TRY_CNT_MSK: Retry count for 1st frame in aggregation (retries 412 * occur if tx failed for this frame when it was a member of a previous 413 * aggregation block). If rate scaling is used, retry count indicates the 414 * rate table entry used for all frames in the new agg. 415 * @AGG_TX_STATE_SEQ_NUM_MSK: Command ID and sequence number of Tx command for 416 * this frame 417 * 418 * TODO: complete documentation 419 */ 420 enum iwl_tx_agg_status { 421 AGG_TX_STATE_STATUS_MSK = 0x00fff, 422 AGG_TX_STATE_TRANSMITTED = 0x000, 423 AGG_TX_STATE_UNDERRUN = 0x001, 424 AGG_TX_STATE_BT_PRIO = 0x002, 425 AGG_TX_STATE_FEW_BYTES = 0x004, 426 AGG_TX_STATE_ABORT = 0x008, 427 AGG_TX_STATE_TX_ON_AIR_DROP = 0x010, 428 AGG_TX_STATE_LAST_SENT_TRY_CNT = 0x020, 429 AGG_TX_STATE_LAST_SENT_BT_KILL = 0x040, 430 AGG_TX_STATE_SCD_QUERY = 0x080, 431 AGG_TX_STATE_TEST_BAD_CRC32 = 0x0100, 432 AGG_TX_STATE_RESPONSE = 0x1ff, 433 AGG_TX_STATE_DUMP_TX = 0x200, 434 AGG_TX_STATE_DELAY_TX = 0x400, 435 AGG_TX_STATE_TRY_CNT_POS = 12, 436 AGG_TX_STATE_TRY_CNT_MSK = 0xf << AGG_TX_STATE_TRY_CNT_POS, 437 }; 438 439 /* 440 * The mask below describes a status where we are absolutely sure that the MPDU 441 * wasn't sent. For BA/Underrun we cannot be that sure. All we know that we've 442 * written the bytes to the TXE, but we know nothing about what the DSP did. 443 */ 444 #define AGG_TX_STAT_FRAME_NOT_SENT (AGG_TX_STATE_FEW_BYTES | \ 445 AGG_TX_STATE_ABORT | \ 446 AGG_TX_STATE_SCD_QUERY) 447 448 /* 449 * REPLY_TX = 0x1c (response) 450 * 451 * This response may be in one of two slightly different formats, indicated 452 * by the frame_count field: 453 * 454 * 1) No aggregation (frame_count == 1). This reports Tx results for a single 455 * frame. Multiple attempts, at various bit rates, may have been made for 456 * this frame. 457 * 458 * 2) Aggregation (frame_count > 1). This reports Tx results for two or more 459 * frames that used block-acknowledge. All frames were transmitted at 460 * same rate. Rate scaling may have been used if first frame in this new 461 * agg block failed in previous agg block(s). 462 * 463 * Note that, for aggregation, ACK (block-ack) status is not delivered 464 * here; block-ack has not been received by the time the device records 465 * this status. 466 * This status relates to reasons the tx might have been blocked or aborted 467 * within the device, rather than whether it was received successfully by 468 * the destination station. 469 */ 470 471 /** 472 * struct agg_tx_status - per packet TX aggregation status 473 * @status: See &enum iwl_tx_agg_status 474 * @sequence: Sequence # for this frame's Tx cmd (not SSN!) 475 */ 476 struct agg_tx_status { 477 __le16 status; 478 __le16 sequence; 479 } __packed; 480 481 /* 482 * definitions for initial rate index field 483 * bits [3:0] initial rate index 484 * bits [6:4] rate table color, used for the initial rate 485 * bit-7 invalid rate indication 486 */ 487 #define TX_RES_INIT_RATE_INDEX_MSK 0x0f 488 #define TX_RES_RATE_TABLE_COLOR_POS 4 489 #define TX_RES_RATE_TABLE_COLOR_MSK 0x70 490 #define TX_RES_INV_RATE_INDEX_MSK 0x80 491 #define TX_RES_RATE_TABLE_COL_GET(_f) (((_f) & TX_RES_RATE_TABLE_COLOR_MSK) >>\ 492 TX_RES_RATE_TABLE_COLOR_POS) 493 494 #define IWL_MVM_TX_RES_GET_TID(_ra_tid) ((_ra_tid) & 0x0f) 495 #define IWL_MVM_TX_RES_GET_RA(_ra_tid) ((_ra_tid) >> 4) 496 497 /** 498 * struct iwl_mvm_tx_resp_v3 - notifies that fw is TXing a packet 499 * ( REPLY_TX = 0x1c ) 500 * @frame_count: 1 no aggregation, >1 aggregation 501 * @bt_kill_count: num of times blocked by bluetooth (unused for agg) 502 * @failure_rts: num of failures due to unsuccessful RTS 503 * @failure_frame: num failures due to no ACK (unused for agg) 504 * @initial_rate: for non-agg: rate of the successful Tx. For agg: rate of the 505 * Tx of all the batch. RATE_MCS_* 506 * @wireless_media_time: for non-agg: RTS + CTS + frame tx attempts time + ACK. 507 * for agg: RTS + CTS + aggregation tx time + block-ack time. 508 * in usec. 509 * @pa_status: tx power info 510 * @pa_integ_res_a: tx power info 511 * @pa_integ_res_b: tx power info 512 * @pa_integ_res_c: tx power info 513 * @measurement_req_id: tx power info 514 * @reduced_tpc: transmit power reduction used 515 * @reserved: reserved 516 * @tfd_info: TFD information set by the FH 517 * @seq_ctl: sequence control from the Tx cmd 518 * @byte_cnt: byte count from the Tx cmd 519 * @tlc_info: TLC rate info 520 * @ra_tid: bits [3:0] = ra, bits [7:4] = tid 521 * @frame_ctrl: frame control 522 * @status: for non-agg: frame status TX_STATUS_* 523 * for agg: status of 1st frame, AGG_TX_STATE_*; other frame status fields 524 * follow this one, up to frame_count. Length in @frame_count. 525 * 526 * After the array of statuses comes the SSN of the SCD. Look at 527 * %iwl_mvm_get_scd_ssn for more details. 528 */ 529 struct iwl_mvm_tx_resp_v3 { 530 u8 frame_count; 531 u8 bt_kill_count; 532 u8 failure_rts; 533 u8 failure_frame; 534 __le32 initial_rate; 535 __le16 wireless_media_time; 536 537 u8 pa_status; 538 u8 pa_integ_res_a[3]; 539 u8 pa_integ_res_b[3]; 540 u8 pa_integ_res_c[3]; 541 __le16 measurement_req_id; 542 u8 reduced_tpc; 543 u8 reserved; 544 545 __le32 tfd_info; 546 __le16 seq_ctl; 547 __le16 byte_cnt; 548 u8 tlc_info; 549 u8 ra_tid; 550 __le16 frame_ctrl; 551 struct agg_tx_status status[]; 552 } __packed; /* TX_RSP_API_S_VER_3 */ 553 554 /** 555 * struct iwl_mvm_tx_resp - notifies that fw is TXing a packet 556 * ( REPLY_TX = 0x1c ) 557 * @frame_count: 1 no aggregation, >1 aggregation 558 * @bt_kill_count: num of times blocked by bluetooth (unused for agg) 559 * @failure_rts: num of failures due to unsuccessful RTS 560 * @failure_frame: num failures due to no ACK (unused for agg) 561 * @initial_rate: for non-agg: rate of the successful Tx. For agg: rate of the 562 * Tx of all the batch. RATE_MCS_* 563 * @wireless_media_time: for non-agg: RTS + CTS + frame tx attempts time + ACK. 564 * for agg: RTS + CTS + aggregation tx time + block-ack time. 565 * in usec. 566 * @pa_status: tx power info 567 * @pa_integ_res_a: tx power info 568 * @pa_integ_res_b: tx power info 569 * @pa_integ_res_c: tx power info 570 * @measurement_req_id: tx power info 571 * @reduced_tpc: transmit power reduction used 572 * @reserved: reserved 573 * @tfd_info: TFD information set by the FH 574 * @seq_ctl: sequence control from the Tx cmd 575 * @byte_cnt: byte count from the Tx cmd 576 * @tlc_info: TLC rate info 577 * @ra_tid: bits [3:0] = ra, bits [7:4] = tid 578 * @frame_ctrl: frame control 579 * @tx_queue: TX queue for this response 580 * @reserved2: reserved for padding/alignment 581 * @status: for non-agg: frame status TX_STATUS_* 582 * For version 6 TX response isn't received for aggregation at all. 583 * 584 * After the array of statuses comes the SSN of the SCD. Look at 585 * %iwl_mvm_get_scd_ssn for more details. 586 */ 587 struct iwl_mvm_tx_resp { 588 u8 frame_count; 589 u8 bt_kill_count; 590 u8 failure_rts; 591 u8 failure_frame; 592 __le32 initial_rate; 593 __le16 wireless_media_time; 594 595 u8 pa_status; 596 u8 pa_integ_res_a[3]; 597 u8 pa_integ_res_b[3]; 598 u8 pa_integ_res_c[3]; 599 __le16 measurement_req_id; 600 u8 reduced_tpc; 601 u8 reserved; 602 603 __le32 tfd_info; 604 __le16 seq_ctl; 605 __le16 byte_cnt; 606 u8 tlc_info; 607 u8 ra_tid; 608 __le16 frame_ctrl; 609 __le16 tx_queue; 610 __le16 reserved2; 611 struct agg_tx_status status; 612 } __packed; /* TX_RSP_API_S_VER_6, 613 TX_RSP_API_S_VER_7 */ 614 615 /** 616 * struct iwl_mvm_ba_notif - notifies about reception of BA 617 * ( BA_NOTIF = 0xc5 ) 618 * @sta_addr: MAC address 619 * @reserved: reserved 620 * @sta_id: Index of recipient (BA-sending) station in fw's station table 621 * @tid: tid of the session 622 * @seq_ctl: sequence control field 623 * @bitmap: the bitmap of the BA notification as seen in the air 624 * @scd_flow: the tx queue this BA relates to 625 * @scd_ssn: the index of the last contiguously sent packet 626 * @txed: number of Txed frames in this batch 627 * @txed_2_done: number of Acked frames in this batch 628 * @reduced_txp: power reduced according to TPC. This is the actual value and 629 * not a copy from the LQ command. Thus, if not the first rate was used 630 * for Tx-ing then this value will be set to 0 by FW. 631 * @reserved1: reserved 632 */ 633 struct iwl_mvm_ba_notif { 634 u8 sta_addr[ETH_ALEN]; 635 __le16 reserved; 636 637 u8 sta_id; 638 u8 tid; 639 __le16 seq_ctl; 640 __le64 bitmap; 641 __le16 scd_flow; 642 __le16 scd_ssn; 643 u8 txed; 644 u8 txed_2_done; 645 u8 reduced_txp; 646 u8 reserved1; 647 } __packed; 648 649 /** 650 * struct iwl_mvm_compressed_ba_tfd - progress of a TFD queue 651 * @q_num: TFD queue number 652 * @tfd_index: Index of first un-acked frame in the TFD queue 653 * @scd_queue: For debug only - the physical queue the TFD queue is bound to 654 * @tid: TID of the queue (0-7) 655 * @reserved: reserved for alignment 656 */ 657 struct iwl_mvm_compressed_ba_tfd { 658 __le16 q_num; 659 __le16 tfd_index; 660 u8 scd_queue; 661 u8 tid; 662 u8 reserved[2]; 663 } __packed; /* COMPRESSED_BA_TFD_API_S_VER_1 */ 664 665 /** 666 * struct iwl_mvm_compressed_ba_ratid - progress of a RA TID queue 667 * @q_num: RA TID queue number 668 * @tid: TID of the queue 669 * @ssn: BA window current SSN 670 */ 671 struct iwl_mvm_compressed_ba_ratid { 672 u8 q_num; 673 u8 tid; 674 __le16 ssn; 675 } __packed; /* COMPRESSED_BA_RATID_API_S_VER_1 */ 676 677 /* 678 * enum iwl_mvm_ba_resp_flags - TX aggregation status 679 * @IWL_MVM_BA_RESP_TX_AGG: generated due to BA 680 * @IWL_MVM_BA_RESP_TX_BAR: generated due to BA after BAR 681 * @IWL_MVM_BA_RESP_TX_AGG_FAIL: aggregation didn't receive BA 682 * @IWL_MVM_BA_RESP_TX_UNDERRUN: aggregation got underrun 683 * @IWL_MVM_BA_RESP_TX_BT_KILL: aggregation got BT-kill 684 * @IWL_MVM_BA_RESP_TX_DSP_TIMEOUT: aggregation didn't finish within the 685 * expected time 686 */ 687 enum iwl_mvm_ba_resp_flags { 688 IWL_MVM_BA_RESP_TX_AGG, 689 IWL_MVM_BA_RESP_TX_BAR, 690 IWL_MVM_BA_RESP_TX_AGG_FAIL, 691 IWL_MVM_BA_RESP_TX_UNDERRUN, 692 IWL_MVM_BA_RESP_TX_BT_KILL, 693 IWL_MVM_BA_RESP_TX_DSP_TIMEOUT 694 }; 695 696 /** 697 * struct iwl_mvm_compressed_ba_notif - notifies about reception of BA 698 * ( BA_NOTIF = 0xc5 ) 699 * @flags: status flag, see the &iwl_mvm_ba_resp_flags 700 * @sta_id: Index of recipient (BA-sending) station in fw's station table 701 * @reduced_txp: power reduced according to TPC. This is the actual value and 702 * not a copy from the LQ command. Thus, if not the first rate was used 703 * for Tx-ing then this value will be set to 0 by FW. 704 * @tlc_rate_info: TLC rate info, initial rate index, TLC table color 705 * @retry_cnt: retry count 706 * @query_byte_cnt: SCD query byte count 707 * @query_frame_cnt: SCD query frame count 708 * @txed: number of frames sent in the aggregation (all-TIDs) 709 * @done: number of frames that were Acked by the BA (all-TIDs) 710 * @reserved: reserved (for alignment) 711 * @wireless_time: Wireless-media time 712 * @tx_rate: the rate the aggregation was sent at 713 * @tfd_cnt: number of TFD-Q elements 714 * @ra_tid_cnt: number of RATID-Q elements 715 * @tfd: array of TFD queue status updates. See &iwl_mvm_compressed_ba_tfd 716 * for details. Length in @tfd_cnt. 717 * @ra_tid: array of RA-TID queue status updates. For debug purposes only. See 718 * &iwl_mvm_compressed_ba_ratid for more details. Length in @ra_tid_cnt. 719 */ 720 struct iwl_mvm_compressed_ba_notif { 721 __le32 flags; 722 u8 sta_id; 723 u8 reduced_txp; 724 u8 tlc_rate_info; 725 u8 retry_cnt; 726 __le32 query_byte_cnt; 727 __le16 query_frame_cnt; 728 __le16 txed; 729 __le16 done; 730 __le16 reserved; 731 __le32 wireless_time; 732 __le32 tx_rate; 733 __le16 tfd_cnt; 734 __le16 ra_tid_cnt; 735 union { 736 DECLARE_FLEX_ARRAY(struct iwl_mvm_compressed_ba_ratid, ra_tid); 737 DECLARE_FLEX_ARRAY(struct iwl_mvm_compressed_ba_tfd, tfd); 738 }; 739 } __packed; /* COMPRESSED_BA_RES_API_S_VER_4, 740 COMPRESSED_BA_RES_API_S_VER_5 */ 741 742 /** 743 * struct iwl_mac_beacon_cmd_v6 - beacon template command 744 * @tx: the tx commands associated with the beacon frame 745 * @template_id: currently equal to the mac context id of the coresponding 746 * mac. 747 * @tim_idx: the offset of the tim IE in the beacon 748 * @tim_size: the length of the tim IE 749 * @frame: the template of the beacon frame 750 */ 751 struct iwl_mac_beacon_cmd_v6 { 752 struct iwl_tx_cmd tx; 753 __le32 template_id; 754 __le32 tim_idx; 755 __le32 tim_size; 756 struct ieee80211_hdr frame[]; 757 } __packed; /* BEACON_TEMPLATE_CMD_API_S_VER_6 */ 758 759 /** 760 * struct iwl_mac_beacon_cmd_v7 - beacon template command with offloaded CSA 761 * @tx: the tx commands associated with the beacon frame 762 * @template_id: currently equal to the mac context id of the coresponding 763 * mac. 764 * @tim_idx: the offset of the tim IE in the beacon 765 * @tim_size: the length of the tim IE 766 * @ecsa_offset: offset to the ECSA IE if present 767 * @csa_offset: offset to the CSA IE if present 768 * @frame: the template of the beacon frame 769 */ 770 struct iwl_mac_beacon_cmd_v7 { 771 struct iwl_tx_cmd tx; 772 __le32 template_id; 773 __le32 tim_idx; 774 __le32 tim_size; 775 __le32 ecsa_offset; 776 __le32 csa_offset; 777 struct ieee80211_hdr frame[]; 778 } __packed; /* BEACON_TEMPLATE_CMD_API_S_VER_7 */ 779 780 /* Bit flags for BEACON_TEMPLATE_CMD_API until version 10 */ 781 enum iwl_mac_beacon_flags_v1 { 782 IWL_MAC_BEACON_CCK_V1 = BIT(8), 783 IWL_MAC_BEACON_ANT_A_V1 = BIT(9), 784 IWL_MAC_BEACON_ANT_B_V1 = BIT(10), 785 IWL_MAC_BEACON_FILS_V1 = BIT(12), 786 }; 787 788 /* Bit flags for BEACON_TEMPLATE_CMD_API version 11 and above */ 789 enum iwl_mac_beacon_flags { 790 IWL_MAC_BEACON_CCK = BIT(5), 791 IWL_MAC_BEACON_ANT_A = BIT(6), 792 IWL_MAC_BEACON_ANT_B = BIT(7), 793 IWL_MAC_BEACON_FILS = BIT(8), 794 }; 795 796 /** 797 * struct iwl_mac_beacon_cmd - beacon template command with offloaded CSA 798 * @byte_cnt: byte count of the beacon frame. 799 * @flags: least significant byte for rate code. The most significant byte 800 * is &enum iwl_mac_beacon_flags. 801 * @short_ssid: Short SSID 802 * @reserved: reserved 803 * @link_id: the firmware id of the link that will use this beacon 804 * @tim_idx: the offset of the tim IE in the beacon 805 * @tim_size: the length of the tim IE 806 * @ecsa_offset: offset to the ECSA IE if present 807 * @csa_offset: offset to the CSA IE if present 808 * @frame: the template of the beacon frame 809 */ 810 struct iwl_mac_beacon_cmd { 811 __le16 byte_cnt; 812 __le16 flags; 813 __le32 short_ssid; 814 __le32 reserved; 815 __le32 link_id; 816 __le32 tim_idx; 817 __le32 tim_size; 818 __le32 ecsa_offset; 819 __le32 csa_offset; 820 struct ieee80211_hdr frame[]; 821 } __packed; /* BEACON_TEMPLATE_CMD_API_S_VER_10, 822 * BEACON_TEMPLATE_CMD_API_S_VER_11, 823 * BEACON_TEMPLATE_CMD_API_S_VER_12, 824 * BEACON_TEMPLATE_CMD_API_S_VER_13 825 */ 826 827 struct iwl_beacon_notif { 828 struct iwl_mvm_tx_resp beacon_notify_hdr; 829 __le64 tsf; 830 __le32 ibss_mgr_status; 831 } __packed; 832 833 /** 834 * struct iwl_extended_beacon_notif_v5 - notifies about beacon transmission 835 * @beacon_notify_hdr: tx response command associated with the beacon 836 * @tsf: last beacon tsf 837 * @ibss_mgr_status: whether IBSS is manager 838 * @gp2: last beacon time in gp2 839 */ 840 struct iwl_extended_beacon_notif_v5 { 841 struct iwl_mvm_tx_resp beacon_notify_hdr; 842 __le64 tsf; 843 __le32 ibss_mgr_status; 844 __le32 gp2; 845 } __packed; /* BEACON_NTFY_API_S_VER_5 */ 846 847 /** 848 * struct iwl_extended_beacon_notif - notifies about beacon transmission 849 * @status: the status of the Tx response of the beacon 850 * @tsf: last beacon tsf 851 * @ibss_mgr_status: whether IBSS is manager 852 * @gp2: last beacon time in gp2 853 */ 854 struct iwl_extended_beacon_notif { 855 __le32 status; 856 __le64 tsf; 857 __le32 ibss_mgr_status; 858 __le32 gp2; 859 } __packed; /* BEACON_NTFY_API_S_VER_6_ */ 860 861 /** 862 * enum iwl_dump_control - dump (flush) control flags 863 * @DUMP_TX_FIFO_FLUSH: Dump MSDUs until the the FIFO is empty 864 * and the TFD queues are empty. 865 */ 866 enum iwl_dump_control { 867 DUMP_TX_FIFO_FLUSH = BIT(1), 868 }; 869 870 /** 871 * struct iwl_tx_path_flush_cmd -- queue/FIFO flush command 872 * @queues_ctl: bitmap of queues to flush 873 * @flush_ctl: control flags 874 * @reserved: reserved 875 */ 876 struct iwl_tx_path_flush_cmd_v1 { 877 __le32 queues_ctl; 878 __le16 flush_ctl; 879 __le16 reserved; 880 } __packed; /* TX_PATH_FLUSH_CMD_API_S_VER_1 */ 881 882 /** 883 * struct iwl_tx_path_flush_cmd -- queue/FIFO flush command 884 * @sta_id: station ID to flush 885 * @tid_mask: TID mask to flush 886 * @reserved: reserved 887 */ 888 struct iwl_tx_path_flush_cmd { 889 __le32 sta_id; 890 __le16 tid_mask; 891 __le16 reserved; 892 } __packed; /* TX_PATH_FLUSH_CMD_API_S_VER_2 */ 893 894 #define IWL_TX_FLUSH_QUEUE_RSP 16 895 896 /** 897 * struct iwl_flush_queue_info - virtual flush queue info 898 * @queue_num: virtual queue id 899 * @read_before_flush: read pointer before flush 900 * @read_after_flush: read pointer after flush 901 */ 902 struct iwl_flush_queue_info { 903 __le16 tid; 904 __le16 queue_num; 905 __le16 read_before_flush; 906 __le16 read_after_flush; 907 } __packed; /* TFDQ_FLUSH_INFO_API_S_VER_1 */ 908 909 /** 910 * struct iwl_tx_path_flush_cmd_rsp -- queue/FIFO flush command response 911 * @num_flushed_queues: number of queues in queues array 912 * @queues: all flushed queues 913 */ 914 struct iwl_tx_path_flush_cmd_rsp { 915 __le16 sta_id; 916 __le16 num_flushed_queues; 917 struct iwl_flush_queue_info queues[IWL_TX_FLUSH_QUEUE_RSP]; 918 } __packed; /* TX_PATH_FLUSH_CMD_RSP_API_S_VER_1 */ 919 920 /* Available options for the SCD_QUEUE_CFG HCMD */ 921 enum iwl_scd_cfg_actions { 922 SCD_CFG_DISABLE_QUEUE = 0x0, 923 SCD_CFG_ENABLE_QUEUE = 0x1, 924 SCD_CFG_UPDATE_QUEUE_TID = 0x2, 925 }; 926 927 /** 928 * struct iwl_scd_txq_cfg_cmd - New txq hw scheduler config command 929 * @token: unused 930 * @sta_id: station id 931 * @tid: TID 932 * @scd_queue: scheduler queue to confiug 933 * @action: 1 queue enable, 0 queue disable, 2 change txq's tid owner 934 * Value is one of &enum iwl_scd_cfg_actions options 935 * @aggregate: 1 aggregated queue, 0 otherwise 936 * @tx_fifo: &enum iwl_mvm_tx_fifo 937 * @window: BA window size 938 * @ssn: SSN for the BA agreement 939 * @reserved: reserved 940 */ 941 struct iwl_scd_txq_cfg_cmd { 942 u8 token; 943 u8 sta_id; 944 u8 tid; 945 u8 scd_queue; 946 u8 action; 947 u8 aggregate; 948 u8 tx_fifo; 949 u8 window; 950 __le16 ssn; 951 __le16 reserved; 952 } __packed; /* SCD_QUEUE_CFG_CMD_API_S_VER_1 */ 953 954 /** 955 * struct iwl_scd_txq_cfg_rsp 956 * @token: taken from the command 957 * @sta_id: station id from the command 958 * @tid: tid from the command 959 * @scd_queue: scd_queue from the command 960 */ 961 struct iwl_scd_txq_cfg_rsp { 962 u8 token; 963 u8 sta_id; 964 u8 tid; 965 u8 scd_queue; 966 } __packed; /* SCD_QUEUE_CFG_RSP_API_S_VER_1 */ 967 968 #endif /* __iwl_fw_api_tx_h__ */ 969