xref: /linux/drivers/net/wireless/intel/iwlwifi/fw/api/tx.h (revision 6c363eafc4d637ac4bd83d4a7dd06dd3cfbe7c5f)
1 /* SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause */
2 /*
3  * Copyright (C) 2012-2014, 2018-2020 Intel Corporation
4  * Copyright (C) 2016-2017 Intel Deutschland GmbH
5  */
6 #ifndef __iwl_fw_api_tx_h__
7 #define __iwl_fw_api_tx_h__
8 #include <linux/ieee80211.h>
9 
10 /**
11  * enum iwl_tx_flags - bitmasks for tx_flags in TX command
12  * @TX_CMD_FLG_PROT_REQUIRE: use RTS or CTS-to-self to protect the frame
13  * @TX_CMD_FLG_WRITE_TX_POWER: update current tx power value in the mgmt frame
14  * @TX_CMD_FLG_ACK: expect ACK from receiving station
15  * @TX_CMD_FLG_STA_RATE: use RS table with initial index from the TX command.
16  *	Otherwise, use rate_n_flags from the TX command
17  * @TX_CMD_FLG_BAR: this frame is a BA request, immediate BAR is expected
18  *	Must set TX_CMD_FLG_ACK with this flag.
19  * @TX_CMD_FLG_TXOP_PROT: TXOP protection requested
20  * @TX_CMD_FLG_VHT_NDPA: mark frame is NDPA for VHT beamformer sequence
21  * @TX_CMD_FLG_HT_NDPA: mark frame is NDPA for HT beamformer sequence
22  * @TX_CMD_FLG_CSI_FDBK2HOST: mark to send feedback to host (only if good CRC)
23  * @TX_CMD_FLG_BT_PRIO_MASK: BT priority value
24  * @TX_CMD_FLG_BT_PRIO_POS: the position of the BT priority (bit 11 is ignored
25  *	on old firmwares).
26  * @TX_CMD_FLG_BT_DIS: disable BT priority for this frame
27  * @TX_CMD_FLG_SEQ_CTL: set if FW should override the sequence control.
28  *	Should be set for mgmt, non-QOS data, mcast, bcast and in scan command
29  * @TX_CMD_FLG_MORE_FRAG: this frame is non-last MPDU
30  * @TX_CMD_FLG_TSF: FW should calculate and insert TSF in the frame
31  *	Should be set for beacons and probe responses
32  * @TX_CMD_FLG_CALIB: activate PA TX power calibrations
33  * @TX_CMD_FLG_KEEP_SEQ_CTL: if seq_ctl is set, don't increase inner seq count
34  * @TX_CMD_FLG_MH_PAD: driver inserted 2 byte padding after MAC header.
35  *	Should be set for 26/30 length MAC headers
36  * @TX_CMD_FLG_RESP_TO_DRV: zero this if the response should go only to FW
37  * @TX_CMD_FLG_TKIP_MIC_DONE: FW already performed TKIP MIC calculation
38  * @TX_CMD_FLG_DUR: disable duration overwriting used in PS-Poll Assoc-id
39  * @TX_CMD_FLG_FW_DROP: FW should mark frame to be dropped
40  * @TX_CMD_FLG_EXEC_PAPD: execute PAPD
41  * @TX_CMD_FLG_PAPD_TYPE: 0 for reference power, 1 for nominal power
42  * @TX_CMD_FLG_HCCA_CHUNK: mark start of TSPEC chunk
43  */
44 enum iwl_tx_flags {
45 	TX_CMD_FLG_PROT_REQUIRE		= BIT(0),
46 	TX_CMD_FLG_WRITE_TX_POWER	= BIT(1),
47 	TX_CMD_FLG_ACK			= BIT(3),
48 	TX_CMD_FLG_STA_RATE		= BIT(4),
49 	TX_CMD_FLG_BAR			= BIT(6),
50 	TX_CMD_FLG_TXOP_PROT		= BIT(7),
51 	TX_CMD_FLG_VHT_NDPA		= BIT(8),
52 	TX_CMD_FLG_HT_NDPA		= BIT(9),
53 	TX_CMD_FLG_CSI_FDBK2HOST	= BIT(10),
54 	TX_CMD_FLG_BT_PRIO_POS		= 11,
55 	TX_CMD_FLG_BT_PRIO_MASK		= BIT(11) | BIT(12),
56 	TX_CMD_FLG_BT_DIS		= BIT(12),
57 	TX_CMD_FLG_SEQ_CTL		= BIT(13),
58 	TX_CMD_FLG_MORE_FRAG		= BIT(14),
59 	TX_CMD_FLG_TSF			= BIT(16),
60 	TX_CMD_FLG_CALIB		= BIT(17),
61 	TX_CMD_FLG_KEEP_SEQ_CTL		= BIT(18),
62 	TX_CMD_FLG_MH_PAD		= BIT(20),
63 	TX_CMD_FLG_RESP_TO_DRV		= BIT(21),
64 	TX_CMD_FLG_TKIP_MIC_DONE	= BIT(23),
65 	TX_CMD_FLG_DUR			= BIT(25),
66 	TX_CMD_FLG_FW_DROP		= BIT(26),
67 	TX_CMD_FLG_EXEC_PAPD		= BIT(27),
68 	TX_CMD_FLG_PAPD_TYPE		= BIT(28),
69 	TX_CMD_FLG_HCCA_CHUNK		= BIT(31)
70 }; /* TX_FLAGS_BITS_API_S_VER_1 */
71 
72 /**
73  * enum iwl_tx_cmd_flags - bitmasks for tx_flags in TX command for 22000
74  * @IWL_TX_FLAGS_CMD_RATE: use rate from the TX command
75  * @IWL_TX_FLAGS_ENCRYPT_DIS: frame should not be encrypted, even if it belongs
76  *	to a secured STA
77  * @IWL_TX_FLAGS_HIGH_PRI: high priority frame (like EAPOL) - can affect rate
78  *	selection, retry limits and BT kill
79  */
80 enum iwl_tx_cmd_flags {
81 	IWL_TX_FLAGS_CMD_RATE		= BIT(0),
82 	IWL_TX_FLAGS_ENCRYPT_DIS	= BIT(1),
83 	IWL_TX_FLAGS_HIGH_PRI		= BIT(2),
84 }; /* TX_FLAGS_BITS_API_S_VER_3 */
85 
86 /**
87  * enum iwl_tx_pm_timeouts - pm timeout values in TX command
88  * @PM_FRAME_NONE: no need to suspend sleep mode
89  * @PM_FRAME_MGMT: fw suspend sleep mode for 100TU
90  * @PM_FRAME_ASSOC: fw suspend sleep mode for 10sec
91  */
92 enum iwl_tx_pm_timeouts {
93 	PM_FRAME_NONE		= 0,
94 	PM_FRAME_MGMT		= 2,
95 	PM_FRAME_ASSOC		= 3,
96 };
97 
98 #define TX_CMD_SEC_MSK			0x07
99 #define TX_CMD_SEC_WEP_KEY_IDX_POS	6
100 #define TX_CMD_SEC_WEP_KEY_IDX_MSK	0xc0
101 
102 /**
103  * enum iwl_tx_cmd_sec_ctrl - bitmasks for security control in TX command
104  * @TX_CMD_SEC_WEP: WEP encryption algorithm.
105  * @TX_CMD_SEC_CCM: CCM encryption algorithm.
106  * @TX_CMD_SEC_TKIP: TKIP encryption algorithm.
107  * @TX_CMD_SEC_EXT: extended cipher algorithm.
108  * @TX_CMD_SEC_GCMP: GCMP encryption algorithm.
109  * @TX_CMD_SEC_KEY128: set for 104 bits WEP key.
110  * @TX_CMD_SEC_KEY_FROM_TABLE: for a non-WEP key, set if the key should be taken
111  *	from the table instead of from the TX command.
112  *	If the key is taken from the key table its index should be given by the
113  *	first byte of the TX command key field.
114  */
115 enum iwl_tx_cmd_sec_ctrl {
116 	TX_CMD_SEC_WEP			= 0x01,
117 	TX_CMD_SEC_CCM			= 0x02,
118 	TX_CMD_SEC_TKIP			= 0x03,
119 	TX_CMD_SEC_EXT			= 0x04,
120 	TX_CMD_SEC_GCMP			= 0x05,
121 	TX_CMD_SEC_KEY128		= 0x08,
122 	TX_CMD_SEC_KEY_FROM_TABLE	= 0x10,
123 };
124 
125 /*
126  * TX command Frame life time in us - to be written in pm_frame_timeout
127  */
128 #define TX_CMD_LIFE_TIME_INFINITE	0xFFFFFFFF
129 #define TX_CMD_LIFE_TIME_DEFAULT	2000000 /* 2000 ms*/
130 #define TX_CMD_LIFE_TIME_PROBE_RESP	40000 /* 40 ms */
131 #define TX_CMD_LIFE_TIME_EXPIRED_FRAME	0
132 
133 /*
134  * TID for non QoS frames - to be written in tid_tspec
135  */
136 #define IWL_TID_NON_QOS	0
137 
138 /*
139  * Limits on the retransmissions - to be written in {data,rts}_retry_limit
140  */
141 #define IWL_DEFAULT_TX_RETRY			15
142 #define IWL_MGMT_DFAULT_RETRY_LIMIT		3
143 #define IWL_RTS_DFAULT_RETRY_LIMIT		60
144 #define IWL_BAR_DFAULT_RETRY_LIMIT		60
145 #define IWL_LOW_RETRY_LIMIT			7
146 
147 /**
148  * enum iwl_tx_offload_assist_flags_pos -  set %iwl_tx_cmd offload_assist values
149  * @TX_CMD_OFFLD_IP_HDR: offset to start of IP header (in words)
150  *	from mac header end. For normal case it is 4 words for SNAP.
151  *	note: tx_cmd, mac header and pad are not counted in the offset.
152  *	This is used to help the offload in case there is tunneling such as
153  *	IPv6 in IPv4, in such case the ip header offset should point to the
154  *	inner ip header and IPv4 checksum of the external header should be
155  *	calculated by driver.
156  * @TX_CMD_OFFLD_L4_EN: enable TCP/UDP checksum
157  * @TX_CMD_OFFLD_L3_EN: enable IP header checksum
158  * @TX_CMD_OFFLD_MH_SIZE: size of the mac header in words. Includes the IV
159  *	field. Doesn't include the pad.
160  * @TX_CMD_OFFLD_PAD: mark 2-byte pad was inserted after the mac header for
161  *	alignment
162  * @TX_CMD_OFFLD_AMSDU: mark TX command is A-MSDU
163  */
164 enum iwl_tx_offload_assist_flags_pos {
165 	TX_CMD_OFFLD_IP_HDR =		0,
166 	TX_CMD_OFFLD_L4_EN =		6,
167 	TX_CMD_OFFLD_L3_EN =		7,
168 	TX_CMD_OFFLD_MH_SIZE =		8,
169 	TX_CMD_OFFLD_PAD =		13,
170 	TX_CMD_OFFLD_AMSDU =		14,
171 };
172 
173 #define IWL_TX_CMD_OFFLD_MH_MASK	0x1f
174 #define IWL_TX_CMD_OFFLD_IP_HDR_MASK	0x3f
175 
176 /* TODO: complete documentation for try_cnt and btkill_cnt */
177 /**
178  * struct iwl_tx_cmd - TX command struct to FW
179  * ( TX_CMD = 0x1c )
180  * @len: in bytes of the payload, see below for details
181  * @offload_assist: TX offload configuration
182  * @tx_flags: combination of TX_CMD_FLG_*, see &enum iwl_tx_flags
183  * @scratch: scratch buffer used by the device
184  * @rate_n_flags: rate for *all* Tx attempts, if TX_CMD_FLG_STA_RATE_MSK is
185  *	cleared. Combination of RATE_MCS_*
186  * @sta_id: index of destination station in FW station table
187  * @sec_ctl: security control, TX_CMD_SEC_*
188  * @initial_rate_index: index into the the rate table for initial TX attempt.
189  *	Applied if TX_CMD_FLG_STA_RATE_MSK is set, normally 0 for data frames.
190  * @reserved2: reserved
191  * @key: security key
192  * @reserved3: reserved
193  * @life_time: frame life time (usecs??)
194  * @dram_lsb_ptr: Physical address of scratch area in the command (try_cnt +
195  *	btkill_cnd + reserved), first 32 bits. "0" disables usage.
196  * @dram_msb_ptr: upper bits of the scratch physical address
197  * @rts_retry_limit: max attempts for RTS
198  * @data_retry_limit: max attempts to send the data packet
199  * @tid_tspec: TID/tspec
200  * @pm_frame_timeout: PM TX frame timeout
201  * @reserved4: reserved
202  * @payload: payload (same as @hdr)
203  * @hdr: 802.11 header (same as @payload)
204  *
205  * The byte count (both len and next_frame_len) includes MAC header
206  * (24/26/30/32 bytes)
207  * + 2 bytes pad if 26/30 header size
208  * + 8 byte IV for CCM or TKIP (not used for WEP)
209  * + Data payload
210  * + 8-byte MIC (not used for CCM/WEP)
211  * It does not include post-MAC padding, i.e.,
212  * MIC (CCM) 8 bytes, ICV (WEP/TKIP/CKIP) 4 bytes, CRC 4 bytes.
213  * Range of len: 14-2342 bytes.
214  *
215  * After the struct fields the MAC header is placed, plus any padding,
216  * and then the actial payload.
217  */
218 struct iwl_tx_cmd {
219 	__le16 len;
220 	__le16 offload_assist;
221 	__le32 tx_flags;
222 	struct {
223 		u8 try_cnt;
224 		u8 btkill_cnt;
225 		__le16 reserved;
226 	} scratch; /* DRAM_SCRATCH_API_U_VER_1 */
227 	__le32 rate_n_flags;
228 	u8 sta_id;
229 	u8 sec_ctl;
230 	u8 initial_rate_index;
231 	u8 reserved2;
232 	u8 key[16];
233 	__le32 reserved3;
234 	__le32 life_time;
235 	__le32 dram_lsb_ptr;
236 	u8 dram_msb_ptr;
237 	u8 rts_retry_limit;
238 	u8 data_retry_limit;
239 	u8 tid_tspec;
240 	__le16 pm_frame_timeout;
241 	__le16 reserved4;
242 	u8 payload[0];
243 	struct ieee80211_hdr hdr[0];
244 } __packed; /* TX_CMD_API_S_VER_6 */
245 
246 struct iwl_dram_sec_info {
247 	__le32 pn_low;
248 	__le16 pn_high;
249 	__le16 aux_info;
250 } __packed; /* DRAM_SEC_INFO_API_S_VER_1 */
251 
252 /**
253  * struct iwl_tx_cmd_gen2 - TX command struct to FW for 22000 devices
254  * ( TX_CMD = 0x1c )
255  * @len: in bytes of the payload, see below for details
256  * @offload_assist: TX offload configuration
257  * @flags: combination of &enum iwl_tx_cmd_flags
258  * @dram_info: FW internal DRAM storage
259  * @rate_n_flags: rate for *all* Tx attempts, if TX_CMD_FLG_STA_RATE_MSK is
260  *	cleared. Combination of RATE_MCS_*
261  * @hdr: 802.11 header
262  */
263 struct iwl_tx_cmd_gen2 {
264 	__le16 len;
265 	__le16 offload_assist;
266 	__le32 flags;
267 	struct iwl_dram_sec_info dram_info;
268 	__le32 rate_n_flags;
269 	struct ieee80211_hdr hdr[];
270 } __packed; /* TX_CMD_API_S_VER_7 */
271 
272 /**
273  * struct iwl_tx_cmd_gen3 - TX command struct to FW for AX210+ devices
274  * ( TX_CMD = 0x1c )
275  * @len: in bytes of the payload, see below for details
276  * @flags: combination of &enum iwl_tx_cmd_flags
277  * @offload_assist: TX offload configuration
278  * @dram_info: FW internal DRAM storage
279  * @rate_n_flags: rate for *all* Tx attempts, if TX_CMD_FLG_STA_RATE_MSK is
280  *	cleared. Combination of RATE_MCS_*
281  * @ttl: time to live - packet lifetime limit. The FW should drop if
282  *	passed.
283  * @hdr: 802.11 header
284  */
285 struct iwl_tx_cmd_gen3 {
286 	__le16 len;
287 	__le16 flags;
288 	__le32 offload_assist;
289 	struct iwl_dram_sec_info dram_info;
290 	__le32 rate_n_flags;
291 	__le64 ttl;
292 	struct ieee80211_hdr hdr[];
293 } __packed; /* TX_CMD_API_S_VER_8 */
294 
295 /*
296  * TX response related data
297  */
298 
299 /*
300  * enum iwl_tx_status - status that is returned by the fw after attempts to Tx
301  * @TX_STATUS_SUCCESS:
302  * @TX_STATUS_DIRECT_DONE:
303  * @TX_STATUS_POSTPONE_DELAY:
304  * @TX_STATUS_POSTPONE_FEW_BYTES:
305  * @TX_STATUS_POSTPONE_BT_PRIO:
306  * @TX_STATUS_POSTPONE_QUIET_PERIOD:
307  * @TX_STATUS_POSTPONE_CALC_TTAK:
308  * @TX_STATUS_FAIL_INTERNAL_CROSSED_RETRY:
309  * @TX_STATUS_FAIL_SHORT_LIMIT:
310  * @TX_STATUS_FAIL_LONG_LIMIT:
311  * @TX_STATUS_FAIL_UNDERRUN:
312  * @TX_STATUS_FAIL_DRAIN_FLOW:
313  * @TX_STATUS_FAIL_RFKILL_FLUSH:
314  * @TX_STATUS_FAIL_LIFE_EXPIRE:
315  * @TX_STATUS_FAIL_DEST_PS:
316  * @TX_STATUS_FAIL_HOST_ABORTED:
317  * @TX_STATUS_FAIL_BT_RETRY:
318  * @TX_STATUS_FAIL_STA_INVALID:
319  * @TX_TATUS_FAIL_FRAG_DROPPED:
320  * @TX_STATUS_FAIL_TID_DISABLE:
321  * @TX_STATUS_FAIL_FIFO_FLUSHED:
322  * @TX_STATUS_FAIL_SMALL_CF_POLL:
323  * @TX_STATUS_FAIL_FW_DROP:
324  * @TX_STATUS_FAIL_STA_COLOR_MISMATCH: mismatch between color of Tx cmd and
325  *	STA table
326  * @TX_FRAME_STATUS_INTERNAL_ABORT:
327  * @TX_MODE_MSK:
328  * @TX_MODE_NO_BURST:
329  * @TX_MODE_IN_BURST_SEQ:
330  * @TX_MODE_FIRST_IN_BURST:
331  * @TX_QUEUE_NUM_MSK:
332  *
333  * Valid only if frame_count =1
334  * TODO: complete documentation
335  */
336 enum iwl_tx_status {
337 	TX_STATUS_MSK = 0x000000ff,
338 	TX_STATUS_SUCCESS = 0x01,
339 	TX_STATUS_DIRECT_DONE = 0x02,
340 	/* postpone TX */
341 	TX_STATUS_POSTPONE_DELAY = 0x40,
342 	TX_STATUS_POSTPONE_FEW_BYTES = 0x41,
343 	TX_STATUS_POSTPONE_BT_PRIO = 0x42,
344 	TX_STATUS_POSTPONE_QUIET_PERIOD = 0x43,
345 	TX_STATUS_POSTPONE_CALC_TTAK = 0x44,
346 	/* abort TX */
347 	TX_STATUS_FAIL_INTERNAL_CROSSED_RETRY = 0x81,
348 	TX_STATUS_FAIL_SHORT_LIMIT = 0x82,
349 	TX_STATUS_FAIL_LONG_LIMIT = 0x83,
350 	TX_STATUS_FAIL_UNDERRUN = 0x84,
351 	TX_STATUS_FAIL_DRAIN_FLOW = 0x85,
352 	TX_STATUS_FAIL_RFKILL_FLUSH = 0x86,
353 	TX_STATUS_FAIL_LIFE_EXPIRE = 0x87,
354 	TX_STATUS_FAIL_DEST_PS = 0x88,
355 	TX_STATUS_FAIL_HOST_ABORTED = 0x89,
356 	TX_STATUS_FAIL_BT_RETRY = 0x8a,
357 	TX_STATUS_FAIL_STA_INVALID = 0x8b,
358 	TX_STATUS_FAIL_FRAG_DROPPED = 0x8c,
359 	TX_STATUS_FAIL_TID_DISABLE = 0x8d,
360 	TX_STATUS_FAIL_FIFO_FLUSHED = 0x8e,
361 	TX_STATUS_FAIL_SMALL_CF_POLL = 0x8f,
362 	TX_STATUS_FAIL_FW_DROP = 0x90,
363 	TX_STATUS_FAIL_STA_COLOR_MISMATCH = 0x91,
364 	TX_STATUS_INTERNAL_ABORT = 0x92,
365 	TX_MODE_MSK = 0x00000f00,
366 	TX_MODE_NO_BURST = 0x00000000,
367 	TX_MODE_IN_BURST_SEQ = 0x00000100,
368 	TX_MODE_FIRST_IN_BURST = 0x00000200,
369 	TX_QUEUE_NUM_MSK = 0x0001f000,
370 	TX_NARROW_BW_MSK = 0x00060000,
371 	TX_NARROW_BW_1DIV2 = 0x00020000,
372 	TX_NARROW_BW_1DIV4 = 0x00040000,
373 	TX_NARROW_BW_1DIV8 = 0x00060000,
374 };
375 
376 /*
377  * enum iwl_tx_agg_status - TX aggregation status
378  * @AGG_TX_STATE_STATUS_MSK:
379  * @AGG_TX_STATE_TRANSMITTED:
380  * @AGG_TX_STATE_UNDERRUN:
381  * @AGG_TX_STATE_BT_PRIO:
382  * @AGG_TX_STATE_FEW_BYTES:
383  * @AGG_TX_STATE_ABORT:
384  * @AGG_TX_STATE_TX_ON_AIR_DROP: TX_ON_AIR signal drop without underrun or
385  *	BT detection
386  * @AGG_TX_STATE_LAST_SENT_TRY_CNT:
387  * @AGG_TX_STATE_LAST_SENT_BT_KILL:
388  * @AGG_TX_STATE_SCD_QUERY:
389  * @AGG_TX_STATE_TEST_BAD_CRC32:
390  * @AGG_TX_STATE_RESPONSE:
391  * @AGG_TX_STATE_DUMP_TX:
392  * @AGG_TX_STATE_DELAY_TX:
393  * @AGG_TX_STATE_TRY_CNT_MSK: Retry count for 1st frame in aggregation (retries
394  *	occur if tx failed for this frame when it was a member of a previous
395  *	aggregation block). If rate scaling is used, retry count indicates the
396  *	rate table entry used for all frames in the new agg.
397  * @AGG_TX_STATE_SEQ_NUM_MSK: Command ID and sequence number of Tx command for
398  *	this frame
399  *
400  * TODO: complete documentation
401  */
402 enum iwl_tx_agg_status {
403 	AGG_TX_STATE_STATUS_MSK = 0x00fff,
404 	AGG_TX_STATE_TRANSMITTED = 0x000,
405 	AGG_TX_STATE_UNDERRUN = 0x001,
406 	AGG_TX_STATE_BT_PRIO = 0x002,
407 	AGG_TX_STATE_FEW_BYTES = 0x004,
408 	AGG_TX_STATE_ABORT = 0x008,
409 	AGG_TX_STATE_TX_ON_AIR_DROP = 0x010,
410 	AGG_TX_STATE_LAST_SENT_TRY_CNT = 0x020,
411 	AGG_TX_STATE_LAST_SENT_BT_KILL = 0x040,
412 	AGG_TX_STATE_SCD_QUERY = 0x080,
413 	AGG_TX_STATE_TEST_BAD_CRC32 = 0x0100,
414 	AGG_TX_STATE_RESPONSE = 0x1ff,
415 	AGG_TX_STATE_DUMP_TX = 0x200,
416 	AGG_TX_STATE_DELAY_TX = 0x400,
417 	AGG_TX_STATE_TRY_CNT_POS = 12,
418 	AGG_TX_STATE_TRY_CNT_MSK = 0xf << AGG_TX_STATE_TRY_CNT_POS,
419 };
420 
421 /*
422  * The mask below describes a status where we are absolutely sure that the MPDU
423  * wasn't sent. For BA/Underrun we cannot be that sure. All we know that we've
424  * written the bytes to the TXE, but we know nothing about what the DSP did.
425  */
426 #define AGG_TX_STAT_FRAME_NOT_SENT (AGG_TX_STATE_FEW_BYTES | \
427 				    AGG_TX_STATE_ABORT | \
428 				    AGG_TX_STATE_SCD_QUERY)
429 
430 /*
431  * REPLY_TX = 0x1c (response)
432  *
433  * This response may be in one of two slightly different formats, indicated
434  * by the frame_count field:
435  *
436  * 1)	No aggregation (frame_count == 1).  This reports Tx results for a single
437  *	frame. Multiple attempts, at various bit rates, may have been made for
438  *	this frame.
439  *
440  * 2)	Aggregation (frame_count > 1).  This reports Tx results for two or more
441  *	frames that used block-acknowledge.  All frames were transmitted at
442  *	same rate. Rate scaling may have been used if first frame in this new
443  *	agg block failed in previous agg block(s).
444  *
445  *	Note that, for aggregation, ACK (block-ack) status is not delivered
446  *	here; block-ack has not been received by the time the device records
447  *	this status.
448  *	This status relates to reasons the tx might have been blocked or aborted
449  *	within the device, rather than whether it was received successfully by
450  *	the destination station.
451  */
452 
453 /**
454  * struct agg_tx_status - per packet TX aggregation status
455  * @status: See &enum iwl_tx_agg_status
456  * @sequence: Sequence # for this frame's Tx cmd (not SSN!)
457  */
458 struct agg_tx_status {
459 	__le16 status;
460 	__le16 sequence;
461 } __packed;
462 
463 /*
464  * definitions for initial rate index field
465  * bits [3:0] initial rate index
466  * bits [6:4] rate table color, used for the initial rate
467  * bit-7 invalid rate indication
468  */
469 #define TX_RES_INIT_RATE_INDEX_MSK 0x0f
470 #define TX_RES_RATE_TABLE_COLOR_POS 4
471 #define TX_RES_RATE_TABLE_COLOR_MSK 0x70
472 #define TX_RES_INV_RATE_INDEX_MSK 0x80
473 #define TX_RES_RATE_TABLE_COL_GET(_f) (((_f) & TX_RES_RATE_TABLE_COLOR_MSK) >>\
474 				       TX_RES_RATE_TABLE_COLOR_POS)
475 
476 #define IWL_MVM_TX_RES_GET_TID(_ra_tid) ((_ra_tid) & 0x0f)
477 #define IWL_MVM_TX_RES_GET_RA(_ra_tid) ((_ra_tid) >> 4)
478 
479 /**
480  * struct iwl_mvm_tx_resp_v3 - notifies that fw is TXing a packet
481  * ( REPLY_TX = 0x1c )
482  * @frame_count: 1 no aggregation, >1 aggregation
483  * @bt_kill_count: num of times blocked by bluetooth (unused for agg)
484  * @failure_rts: num of failures due to unsuccessful RTS
485  * @failure_frame: num failures due to no ACK (unused for agg)
486  * @initial_rate: for non-agg: rate of the successful Tx. For agg: rate of the
487  *	Tx of all the batch. RATE_MCS_*
488  * @wireless_media_time: for non-agg: RTS + CTS + frame tx attempts time + ACK.
489  *	for agg: RTS + CTS + aggregation tx time + block-ack time.
490  *	in usec.
491  * @pa_status: tx power info
492  * @pa_integ_res_a: tx power info
493  * @pa_integ_res_b: tx power info
494  * @pa_integ_res_c: tx power info
495  * @measurement_req_id: tx power info
496  * @reduced_tpc: transmit power reduction used
497  * @reserved: reserved
498  * @tfd_info: TFD information set by the FH
499  * @seq_ctl: sequence control from the Tx cmd
500  * @byte_cnt: byte count from the Tx cmd
501  * @tlc_info: TLC rate info
502  * @ra_tid: bits [3:0] = ra, bits [7:4] = tid
503  * @frame_ctrl: frame control
504  * @status: for non-agg:  frame status TX_STATUS_*
505  *	for agg: status of 1st frame, AGG_TX_STATE_*; other frame status fields
506  *	follow this one, up to frame_count. Length in @frame_count.
507  *
508  * After the array of statuses comes the SSN of the SCD. Look at
509  * %iwl_mvm_get_scd_ssn for more details.
510  */
511 struct iwl_mvm_tx_resp_v3 {
512 	u8 frame_count;
513 	u8 bt_kill_count;
514 	u8 failure_rts;
515 	u8 failure_frame;
516 	__le32 initial_rate;
517 	__le16 wireless_media_time;
518 
519 	u8 pa_status;
520 	u8 pa_integ_res_a[3];
521 	u8 pa_integ_res_b[3];
522 	u8 pa_integ_res_c[3];
523 	__le16 measurement_req_id;
524 	u8 reduced_tpc;
525 	u8 reserved;
526 
527 	__le32 tfd_info;
528 	__le16 seq_ctl;
529 	__le16 byte_cnt;
530 	u8 tlc_info;
531 	u8 ra_tid;
532 	__le16 frame_ctrl;
533 	struct agg_tx_status status[];
534 } __packed; /* TX_RSP_API_S_VER_3 */
535 
536 /**
537  * struct iwl_mvm_tx_resp - notifies that fw is TXing a packet
538  * ( REPLY_TX = 0x1c )
539  * @frame_count: 1 no aggregation, >1 aggregation
540  * @bt_kill_count: num of times blocked by bluetooth (unused for agg)
541  * @failure_rts: num of failures due to unsuccessful RTS
542  * @failure_frame: num failures due to no ACK (unused for agg)
543  * @initial_rate: for non-agg: rate of the successful Tx. For agg: rate of the
544  *	Tx of all the batch. RATE_MCS_*
545  * @wireless_media_time: for non-agg: RTS + CTS + frame tx attempts time + ACK.
546  *	for agg: RTS + CTS + aggregation tx time + block-ack time.
547  *	in usec.
548  * @pa_status: tx power info
549  * @pa_integ_res_a: tx power info
550  * @pa_integ_res_b: tx power info
551  * @pa_integ_res_c: tx power info
552  * @measurement_req_id: tx power info
553  * @reduced_tpc: transmit power reduction used
554  * @reserved: reserved
555  * @tfd_info: TFD information set by the FH
556  * @seq_ctl: sequence control from the Tx cmd
557  * @byte_cnt: byte count from the Tx cmd
558  * @tlc_info: TLC rate info
559  * @ra_tid: bits [3:0] = ra, bits [7:4] = tid
560  * @frame_ctrl: frame control
561  * @tx_queue: TX queue for this response
562  * @reserved2: reserved for padding/alignment
563  * @status: for non-agg:  frame status TX_STATUS_*
564  *	For version 6 TX response isn't received for aggregation at all.
565  *
566  * After the array of statuses comes the SSN of the SCD. Look at
567  * %iwl_mvm_get_scd_ssn for more details.
568  */
569 struct iwl_mvm_tx_resp {
570 	u8 frame_count;
571 	u8 bt_kill_count;
572 	u8 failure_rts;
573 	u8 failure_frame;
574 	__le32 initial_rate;
575 	__le16 wireless_media_time;
576 
577 	u8 pa_status;
578 	u8 pa_integ_res_a[3];
579 	u8 pa_integ_res_b[3];
580 	u8 pa_integ_res_c[3];
581 	__le16 measurement_req_id;
582 	u8 reduced_tpc;
583 	u8 reserved;
584 
585 	__le32 tfd_info;
586 	__le16 seq_ctl;
587 	__le16 byte_cnt;
588 	u8 tlc_info;
589 	u8 ra_tid;
590 	__le16 frame_ctrl;
591 	__le16 tx_queue;
592 	__le16 reserved2;
593 	struct agg_tx_status status;
594 } __packed; /* TX_RSP_API_S_VER_6 */
595 
596 /**
597  * struct iwl_mvm_ba_notif - notifies about reception of BA
598  * ( BA_NOTIF = 0xc5 )
599  * @sta_addr: MAC address
600  * @reserved: reserved
601  * @sta_id: Index of recipient (BA-sending) station in fw's station table
602  * @tid: tid of the session
603  * @seq_ctl: sequence control field
604  * @bitmap: the bitmap of the BA notification as seen in the air
605  * @scd_flow: the tx queue this BA relates to
606  * @scd_ssn: the index of the last contiguously sent packet
607  * @txed: number of Txed frames in this batch
608  * @txed_2_done: number of Acked frames in this batch
609  * @reduced_txp: power reduced according to TPC. This is the actual value and
610  *	not a copy from the LQ command. Thus, if not the first rate was used
611  *	for Tx-ing then this value will be set to 0 by FW.
612  * @reserved1: reserved
613  */
614 struct iwl_mvm_ba_notif {
615 	u8 sta_addr[ETH_ALEN];
616 	__le16 reserved;
617 
618 	u8 sta_id;
619 	u8 tid;
620 	__le16 seq_ctl;
621 	__le64 bitmap;
622 	__le16 scd_flow;
623 	__le16 scd_ssn;
624 	u8 txed;
625 	u8 txed_2_done;
626 	u8 reduced_txp;
627 	u8 reserved1;
628 } __packed;
629 
630 /**
631  * struct iwl_mvm_compressed_ba_tfd - progress of a TFD queue
632  * @q_num: TFD queue number
633  * @tfd_index: Index of first un-acked frame in the  TFD queue
634  * @scd_queue: For debug only - the physical queue the TFD queue is bound to
635  * @tid: TID of the queue (0-7)
636  * @reserved: reserved for alignment
637  */
638 struct iwl_mvm_compressed_ba_tfd {
639 	__le16 q_num;
640 	__le16 tfd_index;
641 	u8 scd_queue;
642 	u8 tid;
643 	u8 reserved[2];
644 } __packed; /* COMPRESSED_BA_TFD_API_S_VER_1 */
645 
646 /**
647  * struct iwl_mvm_compressed_ba_ratid - progress of a RA TID queue
648  * @q_num: RA TID queue number
649  * @tid: TID of the queue
650  * @ssn: BA window current SSN
651  */
652 struct iwl_mvm_compressed_ba_ratid {
653 	u8 q_num;
654 	u8 tid;
655 	__le16 ssn;
656 } __packed; /* COMPRESSED_BA_RATID_API_S_VER_1 */
657 
658 /*
659  * enum iwl_mvm_ba_resp_flags - TX aggregation status
660  * @IWL_MVM_BA_RESP_TX_AGG: generated due to BA
661  * @IWL_MVM_BA_RESP_TX_BAR: generated due to BA after BAR
662  * @IWL_MVM_BA_RESP_TX_AGG_FAIL: aggregation didn't receive BA
663  * @IWL_MVM_BA_RESP_TX_UNDERRUN: aggregation got underrun
664  * @IWL_MVM_BA_RESP_TX_BT_KILL: aggregation got BT-kill
665  * @IWL_MVM_BA_RESP_TX_DSP_TIMEOUT: aggregation didn't finish within the
666  *	expected time
667  */
668 enum iwl_mvm_ba_resp_flags {
669 	IWL_MVM_BA_RESP_TX_AGG,
670 	IWL_MVM_BA_RESP_TX_BAR,
671 	IWL_MVM_BA_RESP_TX_AGG_FAIL,
672 	IWL_MVM_BA_RESP_TX_UNDERRUN,
673 	IWL_MVM_BA_RESP_TX_BT_KILL,
674 	IWL_MVM_BA_RESP_TX_DSP_TIMEOUT
675 };
676 
677 /**
678  * struct iwl_mvm_compressed_ba_notif - notifies about reception of BA
679  * ( BA_NOTIF = 0xc5 )
680  * @flags: status flag, see the &iwl_mvm_ba_resp_flags
681  * @sta_id: Index of recipient (BA-sending) station in fw's station table
682  * @reduced_txp: power reduced according to TPC. This is the actual value and
683  *	not a copy from the LQ command. Thus, if not the first rate was used
684  *	for Tx-ing then this value will be set to 0 by FW.
685  * @tlc_rate_info: TLC rate info, initial rate index, TLC table color
686  * @retry_cnt: retry count
687  * @query_byte_cnt: SCD query byte count
688  * @query_frame_cnt: SCD query frame count
689  * @txed: number of frames sent in the aggregation (all-TIDs)
690  * @done: number of frames that were Acked by the BA (all-TIDs)
691  * @reserved: reserved (for alignment)
692  * @wireless_time: Wireless-media time
693  * @tx_rate: the rate the aggregation was sent at
694  * @tfd_cnt: number of TFD-Q elements
695  * @ra_tid_cnt: number of RATID-Q elements
696  * @tfd: array of TFD queue status updates. See &iwl_mvm_compressed_ba_tfd
697  *	for details. Length in @tfd_cnt.
698  * @ra_tid: array of RA-TID queue status updates. For debug purposes only. See
699  *	&iwl_mvm_compressed_ba_ratid for more details. Length in @ra_tid_cnt.
700  */
701 struct iwl_mvm_compressed_ba_notif {
702 	__le32 flags;
703 	u8 sta_id;
704 	u8 reduced_txp;
705 	u8 tlc_rate_info;
706 	u8 retry_cnt;
707 	__le32 query_byte_cnt;
708 	__le16 query_frame_cnt;
709 	__le16 txed;
710 	__le16 done;
711 	__le16 reserved;
712 	__le32 wireless_time;
713 	__le32 tx_rate;
714 	__le16 tfd_cnt;
715 	__le16 ra_tid_cnt;
716 	struct iwl_mvm_compressed_ba_ratid ra_tid[0];
717 	struct iwl_mvm_compressed_ba_tfd tfd[];
718 } __packed; /* COMPRESSED_BA_RES_API_S_VER_4 */
719 
720 /**
721  * struct iwl_mac_beacon_cmd_v6 - beacon template command
722  * @tx: the tx commands associated with the beacon frame
723  * @template_id: currently equal to the mac context id of the coresponding
724  *  mac.
725  * @tim_idx: the offset of the tim IE in the beacon
726  * @tim_size: the length of the tim IE
727  * @frame: the template of the beacon frame
728  */
729 struct iwl_mac_beacon_cmd_v6 {
730 	struct iwl_tx_cmd tx;
731 	__le32 template_id;
732 	__le32 tim_idx;
733 	__le32 tim_size;
734 	struct ieee80211_hdr frame[];
735 } __packed; /* BEACON_TEMPLATE_CMD_API_S_VER_6 */
736 
737 /**
738  * struct iwl_mac_beacon_cmd_v7 - beacon template command with offloaded CSA
739  * @tx: the tx commands associated with the beacon frame
740  * @template_id: currently equal to the mac context id of the coresponding
741  *  mac.
742  * @tim_idx: the offset of the tim IE in the beacon
743  * @tim_size: the length of the tim IE
744  * @ecsa_offset: offset to the ECSA IE if present
745  * @csa_offset: offset to the CSA IE if present
746  * @frame: the template of the beacon frame
747  */
748 struct iwl_mac_beacon_cmd_v7 {
749 	struct iwl_tx_cmd tx;
750 	__le32 template_id;
751 	__le32 tim_idx;
752 	__le32 tim_size;
753 	__le32 ecsa_offset;
754 	__le32 csa_offset;
755 	struct ieee80211_hdr frame[];
756 } __packed; /* BEACON_TEMPLATE_CMD_API_S_VER_7 */
757 
758 enum iwl_mac_beacon_flags {
759 	IWL_MAC_BEACON_CCK	= BIT(8),
760 	IWL_MAC_BEACON_ANT_A	= BIT(9),
761 	IWL_MAC_BEACON_ANT_B	= BIT(10),
762 	IWL_MAC_BEACON_ANT_C	= BIT(11),
763 	IWL_MAC_BEACON_FILS	= BIT(12),
764 };
765 
766 /**
767  * struct iwl_mac_beacon_cmd - beacon template command with offloaded CSA
768  * @byte_cnt: byte count of the beacon frame.
769  * @flags: least significant byte for rate code. The most significant byte
770  *	is &enum iwl_mac_beacon_flags.
771  * @short_ssid: Short SSID
772  * @reserved: reserved
773  * @template_id: currently equal to the mac context id of the coresponding mac.
774  * @tim_idx: the offset of the tim IE in the beacon
775  * @tim_size: the length of the tim IE
776  * @ecsa_offset: offset to the ECSA IE if present
777  * @csa_offset: offset to the CSA IE if present
778  * @frame: the template of the beacon frame
779  */
780 struct iwl_mac_beacon_cmd {
781 	__le16 byte_cnt;
782 	__le16 flags;
783 	__le32 short_ssid;
784 	__le32 reserved;
785 	__le32 template_id;
786 	__le32 tim_idx;
787 	__le32 tim_size;
788 	__le32 ecsa_offset;
789 	__le32 csa_offset;
790 	struct ieee80211_hdr frame[];
791 } __packed; /* BEACON_TEMPLATE_CMD_API_S_VER_10 */
792 
793 struct iwl_beacon_notif {
794 	struct iwl_mvm_tx_resp beacon_notify_hdr;
795 	__le64 tsf;
796 	__le32 ibss_mgr_status;
797 } __packed;
798 
799 /**
800  * struct iwl_extended_beacon_notif_v5 - notifies about beacon transmission
801  * @beacon_notify_hdr: tx response command associated with the beacon
802  * @tsf: last beacon tsf
803  * @ibss_mgr_status: whether IBSS is manager
804  * @gp2: last beacon time in gp2
805  */
806 struct iwl_extended_beacon_notif_v5 {
807 	struct iwl_mvm_tx_resp beacon_notify_hdr;
808 	__le64 tsf;
809 	__le32 ibss_mgr_status;
810 	__le32 gp2;
811 } __packed; /* BEACON_NTFY_API_S_VER_5 */
812 
813 /**
814  * struct iwl_extended_beacon_notif - notifies about beacon transmission
815  * @status: the status of the Tx response of the beacon
816  * @tsf: last beacon tsf
817  * @ibss_mgr_status: whether IBSS is manager
818  * @gp2: last beacon time in gp2
819  */
820 struct iwl_extended_beacon_notif {
821 	__le32 status;
822 	__le64 tsf;
823 	__le32 ibss_mgr_status;
824 	__le32 gp2;
825 } __packed; /* BEACON_NTFY_API_S_VER_6_ */
826 
827 /**
828  * enum iwl_dump_control - dump (flush) control flags
829  * @DUMP_TX_FIFO_FLUSH: Dump MSDUs until the the FIFO is empty
830  *	and the TFD queues are empty.
831  */
832 enum iwl_dump_control {
833 	DUMP_TX_FIFO_FLUSH	= BIT(1),
834 };
835 
836 /**
837  * struct iwl_tx_path_flush_cmd -- queue/FIFO flush command
838  * @queues_ctl: bitmap of queues to flush
839  * @flush_ctl: control flags
840  * @reserved: reserved
841  */
842 struct iwl_tx_path_flush_cmd_v1 {
843 	__le32 queues_ctl;
844 	__le16 flush_ctl;
845 	__le16 reserved;
846 } __packed; /* TX_PATH_FLUSH_CMD_API_S_VER_1 */
847 
848 /**
849  * struct iwl_tx_path_flush_cmd -- queue/FIFO flush command
850  * @sta_id: station ID to flush
851  * @tid_mask: TID mask to flush
852  * @reserved: reserved
853  */
854 struct iwl_tx_path_flush_cmd {
855 	__le32 sta_id;
856 	__le16 tid_mask;
857 	__le16 reserved;
858 } __packed; /* TX_PATH_FLUSH_CMD_API_S_VER_2 */
859 
860 #define IWL_TX_FLUSH_QUEUE_RSP 16
861 
862 /**
863  * struct iwl_flush_queue_info - virtual flush queue info
864  * @queue_num: virtual queue id
865  * @read_before_flush: read pointer before flush
866  * @read_after_flush: read pointer after flush
867  */
868 struct iwl_flush_queue_info {
869 	__le16 tid;
870 	__le16 queue_num;
871 	__le16 read_before_flush;
872 	__le16 read_after_flush;
873 } __packed; /* TFDQ_FLUSH_INFO_API_S_VER_1 */
874 
875 /**
876  * struct iwl_tx_path_flush_cmd_rsp -- queue/FIFO flush command response
877  * @num_flushed_queues: number of queues in queues array
878  * @queues: all flushed queues
879  */
880 struct iwl_tx_path_flush_cmd_rsp {
881 	__le16 sta_id;
882 	__le16 num_flushed_queues;
883 	struct iwl_flush_queue_info queues[IWL_TX_FLUSH_QUEUE_RSP];
884 } __packed; /* TX_PATH_FLUSH_CMD_RSP_API_S_VER_1 */
885 
886 /* Available options for the SCD_QUEUE_CFG HCMD */
887 enum iwl_scd_cfg_actions {
888 	SCD_CFG_DISABLE_QUEUE		= 0x0,
889 	SCD_CFG_ENABLE_QUEUE		= 0x1,
890 	SCD_CFG_UPDATE_QUEUE_TID	= 0x2,
891 };
892 
893 /**
894  * struct iwl_scd_txq_cfg_cmd - New txq hw scheduler config command
895  * @token: unused
896  * @sta_id: station id
897  * @tid: TID
898  * @scd_queue: scheduler queue to confiug
899  * @action: 1 queue enable, 0 queue disable, 2 change txq's tid owner
900  *	Value is one of &enum iwl_scd_cfg_actions options
901  * @aggregate: 1 aggregated queue, 0 otherwise
902  * @tx_fifo: &enum iwl_mvm_tx_fifo
903  * @window: BA window size
904  * @ssn: SSN for the BA agreement
905  * @reserved: reserved
906  */
907 struct iwl_scd_txq_cfg_cmd {
908 	u8 token;
909 	u8 sta_id;
910 	u8 tid;
911 	u8 scd_queue;
912 	u8 action;
913 	u8 aggregate;
914 	u8 tx_fifo;
915 	u8 window;
916 	__le16 ssn;
917 	__le16 reserved;
918 } __packed; /* SCD_QUEUE_CFG_CMD_API_S_VER_1 */
919 
920 /**
921  * struct iwl_scd_txq_cfg_rsp
922  * @token: taken from the command
923  * @sta_id: station id from the command
924  * @tid: tid from the command
925  * @scd_queue: scd_queue from the command
926  */
927 struct iwl_scd_txq_cfg_rsp {
928 	u8 token;
929 	u8 sta_id;
930 	u8 tid;
931 	u8 scd_queue;
932 } __packed; /* SCD_QUEUE_CFG_RSP_API_S_VER_1 */
933 
934 #endif /* __iwl_fw_api_tx_h__ */
935