1 /* SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause */ 2 /* 3 * Copyright (C) 2015-2017 Intel Deutschland GmbH 4 * Copyright (C) 2018-2022 Intel Corporation 5 * Copyright (C) 2024 Intel Corporation 6 */ 7 #ifndef __iwl_fw_api_location_h__ 8 #define __iwl_fw_api_location_h__ 9 10 /** 11 * enum iwl_location_subcmd_ids - location group command IDs 12 */ 13 enum iwl_location_subcmd_ids { 14 /** 15 * @TOF_RANGE_REQ_CMD: TOF ranging request, 16 * uses one of &struct iwl_tof_range_req_cmd_v5, 17 * &struct iwl_tof_range_req_cmd_v7, 18 * &struct iwl_tof_range_req_cmd_v8, 19 * &struct iwl_tof_range_req_cmd_v9, 20 * &struct iwl_tof_range_req_cmd_v11, 21 * &struct iwl_tof_range_req_cmd_v7 22 */ 23 TOF_RANGE_REQ_CMD = 0x0, 24 /** 25 * @TOF_CONFIG_CMD: TOF configuration, uses &struct iwl_tof_config_cmd 26 */ 27 TOF_CONFIG_CMD = 0x1, 28 /** 29 * @TOF_RANGE_ABORT_CMD: abort ongoing ranging, uses 30 * &struct iwl_tof_range_abort_cmd 31 */ 32 TOF_RANGE_ABORT_CMD = 0x2, 33 /** 34 * @TOF_RANGE_REQ_EXT_CMD: TOF extended ranging config, 35 * uses &struct iwl_tof_range_req_ext_cmd 36 */ 37 TOF_RANGE_REQ_EXT_CMD = 0x3, 38 /** 39 * @TOF_RESPONDER_CONFIG_CMD: FTM responder configuration, one of 40 * &struct iwl_tof_responder_config_cmd_v6, 41 * &struct iwl_tof_responder_config_cmd_v7, 42 * &struct iwl_tof_responder_config_cmd_v8 or 43 * &struct iwl_tof_responder_config_cmd_v9 44 */ 45 TOF_RESPONDER_CONFIG_CMD = 0x4, 46 /** 47 * @TOF_RESPONDER_DYN_CONFIG_CMD: FTM dynamic configuration, 48 * uses &struct iwl_tof_responder_dyn_config_cmd 49 */ 50 TOF_RESPONDER_DYN_CONFIG_CMD = 0x5, 51 /** 52 * @CSI_HEADER_NOTIFICATION: CSI header 53 */ 54 CSI_HEADER_NOTIFICATION = 0xFA, 55 /** 56 * @CSI_CHUNKS_NOTIFICATION: CSI chunk, 57 * uses &struct iwl_csi_chunk_notification 58 */ 59 CSI_CHUNKS_NOTIFICATION = 0xFB, 60 /** 61 * @TOF_LC_NOTIF: used for LCI/civic location, contains just 62 * the action frame 63 */ 64 TOF_LC_NOTIF = 0xFC, 65 /** 66 * @TOF_RESPONDER_STATS: FTM responder statistics notification, 67 * uses &struct iwl_ftm_responder_stats 68 */ 69 TOF_RESPONDER_STATS = 0xFD, 70 /** 71 * @TOF_MCSI_DEBUG_NOTIF: MCSI debug notification, uses 72 * &struct iwl_tof_mcsi_notif 73 */ 74 TOF_MCSI_DEBUG_NOTIF = 0xFE, 75 /** 76 * @TOF_RANGE_RESPONSE_NOTIF: ranging response, using one of 77 * &struct iwl_tof_range_rsp_ntfy_v5, 78 * &struct iwl_tof_range_rsp_ntfy_v6, 79 * &struct iwl_tof_range_rsp_ntfy_v7 or 80 * &struct iwl_tof_range_rsp_ntfy_v8 81 */ 82 TOF_RANGE_RESPONSE_NOTIF = 0xFF, 83 }; 84 85 /** 86 * struct iwl_tof_config_cmd - ToF configuration 87 * @tof_disabled: indicates if ToF is disabled (or not) 88 * @one_sided_disabled: indicates if one-sided is disabled (or not) 89 * @is_debug_mode: indiciates if debug mode is active 90 * @is_buf_required: indicates if channel estimation buffer is required 91 */ 92 struct iwl_tof_config_cmd { 93 u8 tof_disabled; 94 u8 one_sided_disabled; 95 u8 is_debug_mode; 96 u8 is_buf_required; 97 } __packed; 98 99 /** 100 * enum iwl_tof_bandwidth - values for iwl_tof_range_req_ap_entry.bandwidth 101 * @IWL_TOF_BW_20_LEGACY: 20 MHz non-HT 102 * @IWL_TOF_BW_20_HT: 20 MHz HT 103 * @IWL_TOF_BW_40: 40 MHz 104 * @IWL_TOF_BW_80: 80 MHz 105 * @IWL_TOF_BW_160: 160 MHz 106 * @IWL_TOF_BW_NUM: number of tof bandwidths 107 */ 108 enum iwl_tof_bandwidth { 109 IWL_TOF_BW_20_LEGACY, 110 IWL_TOF_BW_20_HT, 111 IWL_TOF_BW_40, 112 IWL_TOF_BW_80, 113 IWL_TOF_BW_160, 114 IWL_TOF_BW_NUM, 115 }; /* LOCAT_BW_TYPE_E */ 116 117 /* 118 * enum iwl_tof_algo_type - Algorithym type for range measurement request 119 */ 120 enum iwl_tof_algo_type { 121 IWL_TOF_ALGO_TYPE_MAX_LIKE = 0, 122 IWL_TOF_ALGO_TYPE_LINEAR_REG = 1, 123 IWL_TOF_ALGO_TYPE_FFT = 2, 124 125 /* Keep last */ 126 IWL_TOF_ALGO_TYPE_INVALID, 127 }; /* ALGO_TYPE_E */ 128 129 /* 130 * enum iwl_tof_mcsi_ntfy - Enable/Disable MCSI notifications 131 */ 132 enum iwl_tof_mcsi_enable { 133 IWL_TOF_MCSI_DISABLED = 0, 134 IWL_TOF_MCSI_ENABLED = 1, 135 }; /* MCSI_ENABLE_E */ 136 137 /** 138 * enum iwl_tof_responder_cmd_valid_field - valid fields in the responder cfg 139 * @IWL_TOF_RESPONDER_CMD_VALID_CHAN_INFO: channel info is valid 140 * @IWL_TOF_RESPONDER_CMD_VALID_TOA_OFFSET: ToA offset is valid 141 * @IWL_TOF_RESPONDER_CMD_VALID_COMMON_CALIB: common calibration mode is valid 142 * @IWL_TOF_RESPONDER_CMD_VALID_SPECIFIC_CALIB: spefici calibration mode is 143 * valid 144 * @IWL_TOF_RESPONDER_CMD_VALID_BSSID: BSSID is valid 145 * @IWL_TOF_RESPONDER_CMD_VALID_TX_ANT: TX antenna is valid 146 * @IWL_TOF_RESPONDER_CMD_VALID_ALGO_TYPE: algorithm type is valid 147 * @IWL_TOF_RESPONDER_CMD_VALID_NON_ASAP_SUPPORT: non-ASAP support is valid 148 * @IWL_TOF_RESPONDER_CMD_VALID_STATISTICS_REPORT_SUPPORT: statistics report 149 * support is valid 150 * @IWL_TOF_RESPONDER_CMD_VALID_MCSI_NOTIF_SUPPORT: MCSI notification support 151 * is valid 152 * @IWL_TOF_RESPONDER_CMD_VALID_FAST_ALGO_SUPPORT: fast algorithm support 153 * is valid 154 * @IWL_TOF_RESPONDER_CMD_VALID_RETRY_ON_ALGO_FAIL: retry on algorithm failure 155 * is valid 156 * @IWL_TOF_RESPONDER_CMD_VALID_STA_ID: station ID is valid 157 * @IWL_TOF_RESPONDER_CMD_VALID_NDP_SUPPORT: enable/disable NDP ranging support 158 * is valid 159 * @IWL_TOF_RESPONDER_CMD_VALID_NDP_PARAMS: NDP parameters are valid 160 * @IWL_TOF_RESPONDER_CMD_VALID_LMR_FEEDBACK: LMR feedback support is valid 161 * @IWL_TOF_RESPONDER_CMD_VALID_SESSION_ID: session id flag is valid 162 * @IWL_TOF_RESPONDER_CMD_VALID_BSS_COLOR: the bss_color field is valid 163 * @IWL_TOF_RESPONDER_CMD_VALID_MIN_MAX_TIME_BETWEEN_MSR: the 164 * min_time_between_msr and max_time_between_msr fields are valid 165 */ 166 enum iwl_tof_responder_cmd_valid_field { 167 IWL_TOF_RESPONDER_CMD_VALID_CHAN_INFO = BIT(0), 168 IWL_TOF_RESPONDER_CMD_VALID_TOA_OFFSET = BIT(1), 169 IWL_TOF_RESPONDER_CMD_VALID_COMMON_CALIB = BIT(2), 170 IWL_TOF_RESPONDER_CMD_VALID_SPECIFIC_CALIB = BIT(3), 171 IWL_TOF_RESPONDER_CMD_VALID_BSSID = BIT(4), 172 IWL_TOF_RESPONDER_CMD_VALID_TX_ANT = BIT(5), 173 IWL_TOF_RESPONDER_CMD_VALID_ALGO_TYPE = BIT(6), 174 IWL_TOF_RESPONDER_CMD_VALID_NON_ASAP_SUPPORT = BIT(7), 175 IWL_TOF_RESPONDER_CMD_VALID_STATISTICS_REPORT_SUPPORT = BIT(8), 176 IWL_TOF_RESPONDER_CMD_VALID_MCSI_NOTIF_SUPPORT = BIT(9), 177 IWL_TOF_RESPONDER_CMD_VALID_FAST_ALGO_SUPPORT = BIT(10), 178 IWL_TOF_RESPONDER_CMD_VALID_RETRY_ON_ALGO_FAIL = BIT(11), 179 IWL_TOF_RESPONDER_CMD_VALID_STA_ID = BIT(12), 180 IWL_TOF_RESPONDER_CMD_VALID_NDP_SUPPORT = BIT(22), 181 IWL_TOF_RESPONDER_CMD_VALID_NDP_PARAMS = BIT(23), 182 IWL_TOF_RESPONDER_CMD_VALID_LMR_FEEDBACK = BIT(24), 183 IWL_TOF_RESPONDER_CMD_VALID_SESSION_ID = BIT(25), 184 IWL_TOF_RESPONDER_CMD_VALID_BSS_COLOR = BIT(26), 185 IWL_TOF_RESPONDER_CMD_VALID_MIN_MAX_TIME_BETWEEN_MSR = BIT(27), 186 }; 187 188 /** 189 * enum iwl_tof_responder_cfg_flags - responder configuration flags 190 * @IWL_TOF_RESPONDER_FLAGS_NON_ASAP_SUPPORT: non-ASAP support 191 * @IWL_TOF_RESPONDER_FLAGS_REPORT_STATISTICS: report statistics 192 * @IWL_TOF_RESPONDER_FLAGS_REPORT_MCSI: report MCSI 193 * @IWL_TOF_RESPONDER_FLAGS_ALGO_TYPE: algorithm type 194 * @IWL_TOF_RESPONDER_FLAGS_TOA_OFFSET_MODE: ToA offset mode 195 * @IWL_TOF_RESPONDER_FLAGS_COMMON_CALIB_MODE: common calibration mode 196 * @IWL_TOF_RESPONDER_FLAGS_SPECIFIC_CALIB_MODE: specific calibration mode 197 * @IWL_TOF_RESPONDER_FLAGS_FAST_ALGO_SUPPORT: fast algorithm support 198 * @IWL_TOF_RESPONDER_FLAGS_RETRY_ON_ALGO_FAIL: retry on algorithm fail 199 * @IWL_TOF_RESPONDER_FLAGS_FTM_TX_ANT: TX antenna mask 200 * @IWL_TOF_RESPONDER_FLAGS_NDP_SUPPORT: support NDP ranging 201 * @IWL_TOF_RESPONDER_FLAGS_LMR_FEEDBACK: request for LMR feedback if the 202 * initiator supports it 203 * @IWL_TOF_RESPONDER_FLAGS_SESSION_ID: send the session id in the initial FTM 204 * frame. 205 */ 206 enum iwl_tof_responder_cfg_flags { 207 IWL_TOF_RESPONDER_FLAGS_NON_ASAP_SUPPORT = BIT(0), 208 IWL_TOF_RESPONDER_FLAGS_REPORT_STATISTICS = BIT(1), 209 IWL_TOF_RESPONDER_FLAGS_REPORT_MCSI = BIT(2), 210 IWL_TOF_RESPONDER_FLAGS_ALGO_TYPE = BIT(3) | BIT(4) | BIT(5), 211 IWL_TOF_RESPONDER_FLAGS_TOA_OFFSET_MODE = BIT(6), 212 IWL_TOF_RESPONDER_FLAGS_COMMON_CALIB_MODE = BIT(7), 213 IWL_TOF_RESPONDER_FLAGS_SPECIFIC_CALIB_MODE = BIT(8), 214 IWL_TOF_RESPONDER_FLAGS_FAST_ALGO_SUPPORT = BIT(9), 215 IWL_TOF_RESPONDER_FLAGS_RETRY_ON_ALGO_FAIL = BIT(10), 216 IWL_TOF_RESPONDER_FLAGS_FTM_TX_ANT = RATE_MCS_ANT_AB_MSK, 217 IWL_TOF_RESPONDER_FLAGS_NDP_SUPPORT = BIT(24), 218 IWL_TOF_RESPONDER_FLAGS_LMR_FEEDBACK = BIT(25), 219 IWL_TOF_RESPONDER_FLAGS_SESSION_ID = BIT(27), 220 }; 221 222 /** 223 * struct iwl_tof_responder_config_cmd_v6 - ToF AP mode (for debug) 224 * @cmd_valid_fields: &iwl_tof_responder_cmd_valid_field 225 * @responder_cfg_flags: &iwl_tof_responder_cfg_flags 226 * @bandwidth: current AP Bandwidth: &enum iwl_tof_bandwidth 227 * @rate: current AP rate 228 * @channel_num: current AP Channel 229 * @ctrl_ch_position: coding of the control channel position relative to 230 * the center frequency, see iwl_mvm_get_ctrl_pos() 231 * @sta_id: index of the AP STA when in AP mode 232 * @reserved1: reserved 233 * @toa_offset: Artificial addition [pSec] for the ToA - to be used for debug 234 * purposes, simulating station movement by adding various values 235 * to this field 236 * @common_calib: XVT: common calibration value 237 * @specific_calib: XVT: specific calibration value 238 * @bssid: Current AP BSSID 239 * @reserved2: reserved 240 */ 241 struct iwl_tof_responder_config_cmd_v6 { 242 __le32 cmd_valid_fields; 243 __le32 responder_cfg_flags; 244 u8 bandwidth; 245 u8 rate; 246 u8 channel_num; 247 u8 ctrl_ch_position; 248 u8 sta_id; 249 u8 reserved1; 250 __le16 toa_offset; 251 __le16 common_calib; 252 __le16 specific_calib; 253 u8 bssid[ETH_ALEN]; 254 __le16 reserved2; 255 } __packed; /* TOF_RESPONDER_CONFIG_CMD_API_S_VER_6 */ 256 257 /** 258 * struct iwl_tof_responder_config_cmd_v7 - ToF AP mode (for debug) 259 * @cmd_valid_fields: &iwl_tof_responder_cmd_valid_field 260 * @responder_cfg_flags: &iwl_tof_responder_cfg_flags 261 * @format_bw: bits 0 - 3: &enum iwl_location_frame_format. 262 * bits 4 - 7: &enum iwl_location_bw. 263 * @rate: current AP rate 264 * @channel_num: current AP Channel 265 * @ctrl_ch_position: coding of the control channel position relative to 266 * the center frequency, see iwl_mvm_get_ctrl_pos() 267 * @sta_id: index of the AP STA when in AP mode 268 * @reserved1: reserved 269 * @toa_offset: Artificial addition [pSec] for the ToA - to be used for debug 270 * purposes, simulating station movement by adding various values 271 * to this field 272 * @common_calib: XVT: common calibration value 273 * @specific_calib: XVT: specific calibration value 274 * @bssid: Current AP BSSID 275 * @reserved2: reserved 276 */ 277 struct iwl_tof_responder_config_cmd_v7 { 278 __le32 cmd_valid_fields; 279 __le32 responder_cfg_flags; 280 u8 format_bw; 281 u8 rate; 282 u8 channel_num; 283 u8 ctrl_ch_position; 284 u8 sta_id; 285 u8 reserved1; 286 __le16 toa_offset; 287 __le16 common_calib; 288 __le16 specific_calib; 289 u8 bssid[ETH_ALEN]; 290 __le16 reserved2; 291 } __packed; /* TOF_RESPONDER_CONFIG_CMD_API_S_VER_7 */ 292 293 #define IWL_RESPONDER_STS_POS 3 294 #define IWL_RESPONDER_TOTAL_LTF_POS 6 295 296 /** 297 * struct iwl_tof_responder_config_cmd_v8 - ToF AP mode (for debug) 298 * @cmd_valid_fields: &iwl_tof_responder_cmd_valid_field 299 * @responder_cfg_flags: &iwl_tof_responder_cfg_flags 300 * @format_bw: bits 0 - 3: &enum iwl_location_frame_format. 301 * bits 4 - 7: &enum iwl_location_bw. 302 * @rate: current AP rate 303 * @channel_num: current AP Channel 304 * @ctrl_ch_position: coding of the control channel position relative to 305 * the center frequency, see iwl_mvm_get_ctrl_pos() 306 * @sta_id: index of the AP STA when in AP mode 307 * @reserved1: reserved 308 * @toa_offset: Artificial addition [pSec] for the ToA - to be used for debug 309 * purposes, simulating station movement by adding various values 310 * to this field 311 * @common_calib: XVT: common calibration value 312 * @specific_calib: XVT: specific calibration value 313 * @bssid: Current AP BSSID 314 * @r2i_ndp_params: parameters for R2I NDP. 315 * bits 0 - 2: max number of LTF repetitions 316 * bits 3 - 5: max number of spatial streams (supported values are < 2) 317 * bits 6 - 7: max number of total LTFs see 318 * &enum ieee80211_range_params_max_total_ltf 319 * @i2r_ndp_params: parameters for I2R NDP. 320 * bits 0 - 2: max number of LTF repetitions 321 * bits 3 - 5: max number of spatial streams 322 * bits 6 - 7: max number of total LTFs see 323 * &enum ieee80211_range_params_max_total_ltf 324 */ 325 struct iwl_tof_responder_config_cmd_v8 { 326 __le32 cmd_valid_fields; 327 __le32 responder_cfg_flags; 328 u8 format_bw; 329 u8 rate; 330 u8 channel_num; 331 u8 ctrl_ch_position; 332 u8 sta_id; 333 u8 reserved1; 334 __le16 toa_offset; 335 __le16 common_calib; 336 __le16 specific_calib; 337 u8 bssid[ETH_ALEN]; 338 u8 r2i_ndp_params; 339 u8 i2r_ndp_params; 340 } __packed; /* TOF_RESPONDER_CONFIG_CMD_API_S_VER_8 */ 341 342 /** 343 * struct iwl_tof_responder_config_cmd_v9 - ToF AP mode (for debug) 344 * @cmd_valid_fields: &iwl_tof_responder_cmd_valid_field 345 * @responder_cfg_flags: &iwl_tof_responder_cfg_flags 346 * @format_bw: bits 0 - 3: &enum iwl_location_frame_format. 347 * bits 4 - 7: &enum iwl_location_bw. 348 * @bss_color: current AP bss_color 349 * @channel_num: current AP Channel 350 * @ctrl_ch_position: coding of the control channel position relative to 351 * the center frequency, see iwl_mvm_get_ctrl_pos() 352 * @sta_id: index of the AP STA when in AP mode 353 * @reserved1: reserved 354 * @toa_offset: Artificial addition [pSec] for the ToA - to be used for debug 355 * purposes, simulating station movement by adding various values 356 * to this field 357 * @common_calib: XVT: common calibration value 358 * @specific_calib: XVT: specific calibration value 359 * @bssid: Current AP BSSID 360 * @r2i_ndp_params: parameters for R2I NDP. 361 * bits 0 - 2: max number of LTF repetitions 362 * bits 3 - 5: max number of spatial streams (supported values are < 2) 363 * bits 6 - 7: max number of total LTFs see 364 * &enum ieee80211_range_params_max_total_ltf 365 * @i2r_ndp_params: parameters for I2R NDP. 366 * bits 0 - 2: max number of LTF repetitions 367 * bits 3 - 5: max number of spatial streams 368 * bits 6 - 7: max number of total LTFs see 369 * &enum ieee80211_range_params_max_total_ltf 370 * @min_time_between_msr: for non trigger based NDP ranging, minimum time 371 * between measurements in milliseconds. 372 * @max_time_between_msr: for non trigger based NDP ranging, maximum time 373 * between measurements in milliseconds. 374 */ 375 struct iwl_tof_responder_config_cmd_v9 { 376 __le32 cmd_valid_fields; 377 __le32 responder_cfg_flags; 378 u8 format_bw; 379 u8 bss_color; 380 u8 channel_num; 381 u8 ctrl_ch_position; 382 u8 sta_id; 383 u8 reserved1; 384 __le16 toa_offset; 385 __le16 common_calib; 386 __le16 specific_calib; 387 u8 bssid[ETH_ALEN]; 388 u8 r2i_ndp_params; 389 u8 i2r_ndp_params; 390 __le16 min_time_between_msr; 391 __le16 max_time_between_msr; 392 } __packed; /* TOF_RESPONDER_CONFIG_CMD_API_S_VER_8 */ 393 394 /** 395 * struct iwl_tof_responder_config_cmd - ToF AP mode 396 * @cmd_valid_fields: &iwl_tof_responder_cmd_valid_field 397 * @responder_cfg_flags: &iwl_tof_responder_cfg_flags 398 * @format_bw: bits 0 - 3: &enum iwl_location_frame_format. 399 * bits 4 - 7: &enum iwl_location_bw. 400 * @bss_color: current AP bss_color 401 * @channel_num: current AP Channel 402 * @ctrl_ch_position: coding of the control channel position relative to 403 * the center frequency, see iwl_mvm_get_ctrl_pos() 404 * @sta_id: index of the AP STA when in AP mode 405 * @band: current AP band 406 * @toa_offset: Artificial addition [pSec] for the ToA - to be used for debug 407 * purposes, simulating station movement by adding various values 408 * to this field 409 * @common_calib: XVT: common calibration value 410 * @specific_calib: XVT: specific calibration value 411 * @bssid: Current AP BSSID 412 * @r2i_ndp_params: parameters for R2I NDP. 413 * bits 0 - 2: max number of LTF repetitions 414 * bits 3 - 5: max number of spatial streams (supported values are < 2) 415 * bits 6 - 7: max number of total LTFs see 416 * &enum ieee80211_range_params_max_total_ltf 417 * @i2r_ndp_params: parameters for I2R NDP. 418 * bits 0 - 2: max number of LTF repetitions 419 * bits 3 - 5: max number of spatial streams 420 * bits 6 - 7: max number of total LTFs see 421 * &enum ieee80211_range_params_max_total_ltf 422 * @min_time_between_msr: for non trigger based NDP ranging, minimum time 423 * between measurements in milliseconds. 424 * @max_time_between_msr: for non trigger based NDP ranging, maximum time 425 * between measurements in milliseconds. 426 */ 427 struct iwl_tof_responder_config_cmd { 428 __le32 cmd_valid_fields; 429 __le32 responder_cfg_flags; 430 u8 format_bw; 431 u8 bss_color; 432 u8 channel_num; 433 u8 ctrl_ch_position; 434 u8 sta_id; 435 u8 band; 436 __le16 toa_offset; 437 __le16 common_calib; 438 __le16 specific_calib; 439 u8 bssid[ETH_ALEN]; 440 u8 r2i_ndp_params; 441 u8 i2r_ndp_params; 442 __le16 min_time_between_msr; 443 __le16 max_time_between_msr; 444 } __packed; /* TOF_RESPONDER_CONFIG_CMD_API_S_VER_10 */ 445 446 #define IWL_LCI_CIVIC_IE_MAX_SIZE 400 447 448 /** 449 * struct iwl_tof_responder_dyn_config_cmd_v2 - Dynamic responder settings 450 * @lci_len: The length of the 1st (LCI) part in the @lci_civic buffer 451 * @civic_len: The length of the 2nd (CIVIC) part in the @lci_civic buffer 452 * @lci_civic: The LCI/CIVIC buffer. LCI data (if exists) comes first, then, if 453 * needed, 0-padding such that the next part is dword-aligned, then CIVIC 454 * data (if exists) follows, and then 0-padding again to complete a 455 * 4-multiple long buffer. 456 */ 457 struct iwl_tof_responder_dyn_config_cmd_v2 { 458 __le32 lci_len; 459 __le32 civic_len; 460 u8 lci_civic[]; 461 } __packed; /* TOF_RESPONDER_DYN_CONFIG_CMD_API_S_VER_2 */ 462 463 #define IWL_LCI_MAX_SIZE 160 464 #define IWL_CIVIC_MAX_SIZE 160 465 #define HLTK_11AZ_LEN 32 466 467 /** 468 * enum iwl_responder_dyn_cfg_valid_flags - valid flags for dyn_config_cmd 469 * @IWL_RESPONDER_DYN_CFG_VALID_LCI: LCI data is valid 470 * @IWL_RESPONDER_DYN_CFG_VALID_CIVIC: Civic data is valid 471 * @IWL_RESPONDER_DYN_CFG_VALID_PASN_STA: the pasn_addr, HLTK and cipher fields 472 * are valid. 473 */ 474 enum iwl_responder_dyn_cfg_valid_flags { 475 IWL_RESPONDER_DYN_CFG_VALID_LCI = BIT(0), 476 IWL_RESPONDER_DYN_CFG_VALID_CIVIC = BIT(1), 477 IWL_RESPONDER_DYN_CFG_VALID_PASN_STA = BIT(2), 478 }; 479 480 /** 481 * struct iwl_tof_responder_dyn_config_cmd - Dynamic responder settings 482 * @cipher: The negotiated cipher. see &enum iwl_location_cipher. 483 * @valid_flags: flags indicating which fields in the command are valid. see 484 * &enum iwl_responder_dyn_cfg_valid_flags. 485 * @lci_len: length of the LCI data in bytes 486 * @civic_len: length of the Civic data in bytes 487 * @lci_buf: the LCI buffer 488 * @civic_buf: the Civic buffer 489 * @hltk_buf: HLTK for secure LTF bits generation for the specified station 490 * @addr: mac address of the station for which to use the HLTK 491 * @reserved: for alignment 492 */ 493 struct iwl_tof_responder_dyn_config_cmd { 494 u8 cipher; 495 u8 valid_flags; 496 u8 lci_len; 497 u8 civic_len; 498 u8 lci_buf[IWL_LCI_MAX_SIZE]; 499 u8 civic_buf[IWL_LCI_MAX_SIZE]; 500 u8 hltk_buf[HLTK_11AZ_LEN]; 501 u8 addr[ETH_ALEN]; 502 u8 reserved[2]; 503 } __packed; /* TOF_RESPONDER_DYN_CONFIG_CMD_API_S_VER_3 */ 504 505 /** 506 * struct iwl_tof_range_req_ext_cmd - extended range req for WLS 507 * @tsf_timer_offset_msec: the recommended time offset (mSec) from the AP's TSF 508 * @reserved: reserved 509 * @min_delta_ftm: Minimal time between two consecutive measurements, 510 * in units of 100us. 0 means no preference by station 511 * @ftm_format_and_bw20M: FTM Channel Spacing/Format for 20MHz: recommended 512 * value be sent to the AP 513 * @ftm_format_and_bw40M: FTM Channel Spacing/Format for 40MHz: recommended 514 * value to be sent to the AP 515 * @ftm_format_and_bw80M: FTM Channel Spacing/Format for 80MHz: recommended 516 * value to be sent to the AP 517 */ 518 struct iwl_tof_range_req_ext_cmd { 519 __le16 tsf_timer_offset_msec; 520 __le16 reserved; 521 u8 min_delta_ftm; 522 u8 ftm_format_and_bw20M; 523 u8 ftm_format_and_bw40M; 524 u8 ftm_format_and_bw80M; 525 } __packed; 526 527 /** 528 * enum iwl_tof_location_query - values for query bitmap 529 * @IWL_TOF_LOC_LCI: query LCI 530 * @IWL_TOF_LOC_CIVIC: query civic 531 */ 532 enum iwl_tof_location_query { 533 IWL_TOF_LOC_LCI = 0x01, 534 IWL_TOF_LOC_CIVIC = 0x02, 535 }; 536 537 /** 538 * struct iwl_tof_range_req_ap_entry_v2 - AP configuration parameters 539 * @channel_num: Current AP Channel 540 * @bandwidth: Current AP Bandwidth. One of iwl_tof_bandwidth. 541 * @tsf_delta_direction: TSF relatively to the subject AP 542 * @ctrl_ch_position: Coding of the control channel position relative to the 543 * center frequency, see iwl_mvm_get_ctrl_pos(). 544 * @bssid: AP's BSSID 545 * @measure_type: Measurement type: 0 - two sided, 1 - One sided 546 * @num_of_bursts: Recommended value to be sent to the AP. 2s Exponent of the 547 * number of measurement iterations (min 2^0 = 1, max 2^14) 548 * @burst_period: Recommended value to be sent to the AP. Measurement 549 * periodicity In units of 100ms. ignored if num_of_bursts = 0 550 * @samples_per_burst: 2-sided: the number of FTMs pairs in single Burst (1-31); 551 * 1-sided: how many rts/cts pairs should be used per burst. 552 * @retries_per_sample: Max number of retries that the LMAC should send 553 * in case of no replies by the AP. 554 * @tsf_delta: TSF Delta in units of microseconds. 555 * The difference between the AP TSF and the device local clock. 556 * @location_req: Location Request Bit[0] LCI should be sent in the FTMR; 557 * Bit[1] Civic should be sent in the FTMR 558 * @asap_mode: 0 - non asap mode, 1 - asap mode (not relevant for one sided) 559 * @enable_dyn_ack: Enable Dynamic ACK BW. 560 * 0: Initiator interact with regular AP; 561 * 1: Initiator interact with Responder machine: need to send the 562 * Initiator Acks with HT 40MHz / 80MHz, since the Responder should 563 * use it for its ch est measurement (this flag will be set when we 564 * configure the opposite machine to be Responder). 565 * @rssi: Last received value 566 * legal values: -128-0 (0x7f). above 0x0 indicating an invalid value. 567 * @algo_type: &enum iwl_tof_algo_type 568 * @notify_mcsi: &enum iwl_tof_mcsi_ntfy. 569 * @reserved: For alignment and future use 570 */ 571 struct iwl_tof_range_req_ap_entry_v2 { 572 u8 channel_num; 573 u8 bandwidth; 574 u8 tsf_delta_direction; 575 u8 ctrl_ch_position; 576 u8 bssid[ETH_ALEN]; 577 u8 measure_type; 578 u8 num_of_bursts; 579 __le16 burst_period; 580 u8 samples_per_burst; 581 u8 retries_per_sample; 582 __le32 tsf_delta; 583 u8 location_req; 584 u8 asap_mode; 585 u8 enable_dyn_ack; 586 s8 rssi; 587 u8 algo_type; 588 u8 notify_mcsi; 589 __le16 reserved; 590 } __packed; /* LOCATION_RANGE_REQ_AP_ENTRY_CMD_API_S_VER_2 */ 591 592 /** 593 * enum iwl_initiator_ap_flags - per responder FTM configuration flags 594 * @IWL_INITIATOR_AP_FLAGS_ASAP: Request for ASAP measurement. 595 * @IWL_INITIATOR_AP_FLAGS_LCI_REQUEST: Request for LCI information 596 * @IWL_INITIATOR_AP_FLAGS_CIVIC_REQUEST: Request for CIVIC information 597 * @IWL_INITIATOR_AP_FLAGS_DYN_ACK: Send HT/VHT ack for FTM frames. If not set, 598 * 20Mhz dup acks will be sent. 599 * @IWL_INITIATOR_AP_FLAGS_ALGO_LR: Use LR algo type for rtt calculation. 600 * Default algo type is ML. 601 * @IWL_INITIATOR_AP_FLAGS_ALGO_FFT: Use FFT algo type for rtt calculation. 602 * Default algo type is ML. 603 * @IWL_INITIATOR_AP_FLAGS_MCSI_REPORT: Send the MCSI for each FTM frame to the 604 * driver. 605 * @IWL_INITIATOR_AP_FLAGS_NON_TB: Use non trigger based flow 606 * @IWL_INITIATOR_AP_FLAGS_TB: Use trigger based flow 607 * @IWL_INITIATOR_AP_FLAGS_SECURED: request secure LTF measurement 608 * @IWL_INITIATOR_AP_FLAGS_LMR_FEEDBACK: Send LMR feedback 609 * @IWL_INITIATOR_AP_FLAGS_USE_CALIB: Use calibration values from the request 610 * instead of fw internal values. 611 * @IWL_INITIATOR_AP_FLAGS_PMF: request to protect the negotiation and LMR 612 * frames with protected management frames. 613 * @IWL_INITIATOR_AP_FLAGS_TERMINATE_ON_LMR_FEEDBACK: terminate the session if 614 * the responder asked for LMR feedback although the initiator did not set 615 * the LMR feedback bit in the FTM request. If not set, the initiator will 616 * continue with the session and will provide the LMR feedback. 617 * @IWL_INITIATOR_AP_FLAGS_TEST_INCORRECT_SAC: send an incorrect SAC in the 618 * first NDP exchange. This is used for testing. 619 */ 620 enum iwl_initiator_ap_flags { 621 IWL_INITIATOR_AP_FLAGS_ASAP = BIT(1), 622 IWL_INITIATOR_AP_FLAGS_LCI_REQUEST = BIT(2), 623 IWL_INITIATOR_AP_FLAGS_CIVIC_REQUEST = BIT(3), 624 IWL_INITIATOR_AP_FLAGS_DYN_ACK = BIT(4), 625 IWL_INITIATOR_AP_FLAGS_ALGO_LR = BIT(5), 626 IWL_INITIATOR_AP_FLAGS_ALGO_FFT = BIT(6), 627 IWL_INITIATOR_AP_FLAGS_MCSI_REPORT = BIT(8), 628 IWL_INITIATOR_AP_FLAGS_NON_TB = BIT(9), 629 IWL_INITIATOR_AP_FLAGS_TB = BIT(10), 630 IWL_INITIATOR_AP_FLAGS_SECURED = BIT(11), 631 IWL_INITIATOR_AP_FLAGS_LMR_FEEDBACK = BIT(12), 632 IWL_INITIATOR_AP_FLAGS_USE_CALIB = BIT(13), 633 IWL_INITIATOR_AP_FLAGS_PMF = BIT(14), 634 IWL_INITIATOR_AP_FLAGS_TERMINATE_ON_LMR_FEEDBACK = BIT(15), 635 IWL_INITIATOR_AP_FLAGS_TEST_INCORRECT_SAC = BIT(16), 636 }; 637 638 /** 639 * struct iwl_tof_range_req_ap_entry_v3 - AP configuration parameters 640 * @initiator_ap_flags: see &enum iwl_initiator_ap_flags. 641 * @channel_num: AP Channel number 642 * @bandwidth: AP bandwidth. One of iwl_tof_bandwidth. 643 * @ctrl_ch_position: Coding of the control channel position relative to the 644 * center frequency, see iwl_mvm_get_ctrl_pos(). 645 * @ftmr_max_retries: Max number of retries to send the FTMR in case of no 646 * reply from the AP. 647 * @bssid: AP's BSSID 648 * @burst_period: Recommended value to be sent to the AP. Measurement 649 * periodicity In units of 100ms. ignored if num_of_bursts_exp = 0 650 * @samples_per_burst: the number of FTMs pairs in single Burst (1-31); 651 * @num_of_bursts: Recommended value to be sent to the AP. 2s Exponent of 652 * the number of measurement iterations (min 2^0 = 1, max 2^14) 653 * @reserved: For alignment and future use 654 * @tsf_delta: not in use 655 */ 656 struct iwl_tof_range_req_ap_entry_v3 { 657 __le32 initiator_ap_flags; 658 u8 channel_num; 659 u8 bandwidth; 660 u8 ctrl_ch_position; 661 u8 ftmr_max_retries; 662 u8 bssid[ETH_ALEN]; 663 __le16 burst_period; 664 u8 samples_per_burst; 665 u8 num_of_bursts; 666 __le16 reserved; 667 __le32 tsf_delta; 668 } __packed; /* LOCATION_RANGE_REQ_AP_ENTRY_CMD_API_S_VER_3 */ 669 670 /** 671 * enum iwl_location_frame_format - location frame formats 672 * @IWL_LOCATION_FRAME_FORMAT_LEGACY: legacy 673 * @IWL_LOCATION_FRAME_FORMAT_HT: HT 674 * @IWL_LOCATION_FRAME_FORMAT_VHT: VHT 675 * @IWL_LOCATION_FRAME_FORMAT_HE: HE 676 */ 677 enum iwl_location_frame_format { 678 IWL_LOCATION_FRAME_FORMAT_LEGACY, 679 IWL_LOCATION_FRAME_FORMAT_HT, 680 IWL_LOCATION_FRAME_FORMAT_VHT, 681 IWL_LOCATION_FRAME_FORMAT_HE, 682 }; 683 684 /** 685 * enum iwl_location_bw - location bandwidth selection 686 * @IWL_LOCATION_BW_20MHZ: 20MHz 687 * @IWL_LOCATION_BW_40MHZ: 40MHz 688 * @IWL_LOCATION_BW_80MHZ: 80MHz 689 * @IWL_LOCATION_BW_160MHZ: 160MHz 690 */ 691 enum iwl_location_bw { 692 IWL_LOCATION_BW_20MHZ, 693 IWL_LOCATION_BW_40MHZ, 694 IWL_LOCATION_BW_80MHZ, 695 IWL_LOCATION_BW_160MHZ, 696 }; 697 698 #define TK_11AZ_LEN 32 699 700 #define LOCATION_BW_POS 4 701 702 /** 703 * struct iwl_tof_range_req_ap_entry_v4 - AP configuration parameters 704 * @initiator_ap_flags: see &enum iwl_initiator_ap_flags. 705 * @channel_num: AP Channel number 706 * @format_bw: bits 0 - 3: &enum iwl_location_frame_format. 707 * bits 4 - 7: &enum iwl_location_bw. 708 * @ctrl_ch_position: Coding of the control channel position relative to the 709 * center frequency, see iwl_mvm_get_ctrl_pos(). 710 * @ftmr_max_retries: Max number of retries to send the FTMR in case of no 711 * reply from the AP. 712 * @bssid: AP's BSSID 713 * @burst_period: Recommended value to be sent to the AP. Measurement 714 * periodicity In units of 100ms. ignored if num_of_bursts_exp = 0 715 * @samples_per_burst: the number of FTMs pairs in single Burst (1-31); 716 * @num_of_bursts: Recommended value to be sent to the AP. 2s Exponent of 717 * the number of measurement iterations (min 2^0 = 1, max 2^14) 718 * @reserved: For alignment and future use 719 * @hltk: HLTK to be used for secured 11az measurement 720 * @tk: TK to be used for secured 11az measurement 721 */ 722 struct iwl_tof_range_req_ap_entry_v4 { 723 __le32 initiator_ap_flags; 724 u8 channel_num; 725 u8 format_bw; 726 u8 ctrl_ch_position; 727 u8 ftmr_max_retries; 728 u8 bssid[ETH_ALEN]; 729 __le16 burst_period; 730 u8 samples_per_burst; 731 u8 num_of_bursts; 732 __le16 reserved; 733 u8 hltk[HLTK_11AZ_LEN]; 734 u8 tk[TK_11AZ_LEN]; 735 } __packed; /* LOCATION_RANGE_REQ_AP_ENTRY_CMD_API_S_VER_4 */ 736 737 /** 738 * enum iwl_location_cipher - location cipher selection 739 * @IWL_LOCATION_CIPHER_CCMP_128: CCMP 128 740 * @IWL_LOCATION_CIPHER_GCMP_128: GCMP 128 741 * @IWL_LOCATION_CIPHER_GCMP_256: GCMP 256 742 * @IWL_LOCATION_CIPHER_INVALID: security is not used. 743 * @IWL_LOCATION_CIPHER_MAX: maximum value for this enum. 744 */ 745 enum iwl_location_cipher { 746 IWL_LOCATION_CIPHER_CCMP_128, 747 IWL_LOCATION_CIPHER_GCMP_128, 748 IWL_LOCATION_CIPHER_GCMP_256, 749 IWL_LOCATION_CIPHER_INVALID, 750 IWL_LOCATION_CIPHER_MAX, 751 }; 752 753 /** 754 * struct iwl_tof_range_req_ap_entry_v6 - AP configuration parameters 755 * @initiator_ap_flags: see &enum iwl_initiator_ap_flags. 756 * @channel_num: AP Channel number 757 * @format_bw: bits 0 - 3: &enum iwl_location_frame_format. 758 * bits 4 - 7: &enum iwl_location_bw. 759 * @ctrl_ch_position: Coding of the control channel position relative to the 760 * center frequency, see iwl_mvm_get_ctrl_pos(). 761 * @ftmr_max_retries: Max number of retries to send the FTMR in case of no 762 * reply from the AP. 763 * @bssid: AP's BSSID 764 * @burst_period: Recommended value to be sent to the AP. Measurement 765 * periodicity In units of 100ms. ignored if num_of_bursts_exp = 0 766 * @samples_per_burst: the number of FTMs pairs in single Burst (1-31); 767 * @num_of_bursts: Recommended value to be sent to the AP. 2s Exponent of 768 * the number of measurement iterations (min 2^0 = 1, max 2^14) 769 * @sta_id: the station id of the AP. Only relevant when associated to the AP, 770 * otherwise should be set to &IWL_MVM_INVALID_STA. 771 * @cipher: pairwise cipher suite for secured measurement. 772 * &enum iwl_location_cipher. 773 * @hltk: HLTK to be used for secured 11az measurement 774 * @tk: TK to be used for secured 11az measurement 775 * @calib: An array of calibration values per FTM rx bandwidth. 776 * If &IWL_INITIATOR_AP_FLAGS_USE_CALIB is set, the fw will use the 777 * calibration value that corresponds to the rx bandwidth of the FTM 778 * frame. 779 * @beacon_interval: beacon interval of the AP in TUs. Only required if 780 * &IWL_INITIATOR_AP_FLAGS_TB is set. 781 */ 782 struct iwl_tof_range_req_ap_entry_v6 { 783 __le32 initiator_ap_flags; 784 u8 channel_num; 785 u8 format_bw; 786 u8 ctrl_ch_position; 787 u8 ftmr_max_retries; 788 u8 bssid[ETH_ALEN]; 789 __le16 burst_period; 790 u8 samples_per_burst; 791 u8 num_of_bursts; 792 u8 sta_id; 793 u8 cipher; 794 u8 hltk[HLTK_11AZ_LEN]; 795 u8 tk[TK_11AZ_LEN]; 796 __le16 calib[IWL_TOF_BW_NUM]; 797 __le16 beacon_interval; 798 } __packed; /* LOCATION_RANGE_REQ_AP_ENTRY_CMD_API_S_VER_6 */ 799 800 /** 801 * struct iwl_tof_range_req_ap_entry_v7 - AP configuration parameters 802 * @initiator_ap_flags: see &enum iwl_initiator_ap_flags. 803 * @channel_num: AP Channel number 804 * @format_bw: bits 0 - 3: &enum iwl_location_frame_format. 805 * bits 4 - 7: &enum iwl_location_bw. 806 * @ctrl_ch_position: Coding of the control channel position relative to the 807 * center frequency, see iwl_mvm_get_ctrl_pos(). 808 * @ftmr_max_retries: Max number of retries to send the FTMR in case of no 809 * reply from the AP. 810 * @bssid: AP's BSSID 811 * @burst_period: Recommended value to be sent to the AP. Measurement 812 * periodicity In units of 100ms. ignored if num_of_bursts_exp = 0 813 * @samples_per_burst: the number of FTMs pairs in single Burst (1-31); 814 * @num_of_bursts: Recommended value to be sent to the AP. 2s Exponent of 815 * the number of measurement iterations (min 2^0 = 1, max 2^14) 816 * @sta_id: the station id of the AP. Only relevant when associated to the AP, 817 * otherwise should be set to &IWL_MVM_INVALID_STA. 818 * @cipher: pairwise cipher suite for secured measurement. 819 * &enum iwl_location_cipher. 820 * @hltk: HLTK to be used for secured 11az measurement 821 * @tk: TK to be used for secured 11az measurement 822 * @calib: An array of calibration values per FTM rx bandwidth. 823 * If &IWL_INITIATOR_AP_FLAGS_USE_CALIB is set, the fw will use the 824 * calibration value that corresponds to the rx bandwidth of the FTM 825 * frame. 826 * @beacon_interval: beacon interval of the AP in TUs. Only required if 827 * &IWL_INITIATOR_AP_FLAGS_TB is set. 828 * @rx_pn: the next expected PN for protected management frames Rx. LE byte 829 * order. Only valid if &IWL_INITIATOR_AP_FLAGS_SECURED is set and sta_id 830 * is set to &IWL_MVM_INVALID_STA. 831 * @tx_pn: the next PN to use for protected management frames Tx. LE byte 832 * order. Only valid if &IWL_INITIATOR_AP_FLAGS_SECURED is set and sta_id 833 * is set to &IWL_MVM_INVALID_STA. 834 */ 835 struct iwl_tof_range_req_ap_entry_v7 { 836 __le32 initiator_ap_flags; 837 u8 channel_num; 838 u8 format_bw; 839 u8 ctrl_ch_position; 840 u8 ftmr_max_retries; 841 u8 bssid[ETH_ALEN]; 842 __le16 burst_period; 843 u8 samples_per_burst; 844 u8 num_of_bursts; 845 u8 sta_id; 846 u8 cipher; 847 u8 hltk[HLTK_11AZ_LEN]; 848 u8 tk[TK_11AZ_LEN]; 849 __le16 calib[IWL_TOF_BW_NUM]; 850 __le16 beacon_interval; 851 u8 rx_pn[IEEE80211_CCMP_PN_LEN]; 852 u8 tx_pn[IEEE80211_CCMP_PN_LEN]; 853 } __packed; /* LOCATION_RANGE_REQ_AP_ENTRY_CMD_API_S_VER_7 */ 854 855 #define IWL_LOCATION_MAX_STS_POS 3 856 #define IWL_LOCATION_TOTAL_LTF_POS 6 857 858 /** 859 * struct iwl_tof_range_req_ap_entry_v8 - AP configuration parameters 860 * @initiator_ap_flags: see &enum iwl_initiator_ap_flags. 861 * @channel_num: AP Channel number 862 * @format_bw: bits 0 - 3: &enum iwl_location_frame_format. 863 * bits 4 - 7: &enum iwl_location_bw. 864 * @ctrl_ch_position: Coding of the control channel position relative to the 865 * center frequency, see iwl_mvm_get_ctrl_pos(). 866 * @ftmr_max_retries: Max number of retries to send the FTMR in case of no 867 * reply from the AP. 868 * @bssid: AP's BSSID 869 * @burst_period: Recommended value to be sent to the AP. Measurement 870 * periodicity In units of 100ms. ignored if num_of_bursts_exp = 0 871 * @samples_per_burst: the number of FTMs pairs in single Burst (1-31); 872 * @num_of_bursts: Recommended value to be sent to the AP. 2s Exponent of 873 * the number of measurement iterations (min 2^0 = 1, max 2^14) 874 * @sta_id: the station id of the AP. Only relevant when associated to the AP, 875 * otherwise should be set to &IWL_MVM_INVALID_STA. 876 * @cipher: pairwise cipher suite for secured measurement. 877 * &enum iwl_location_cipher. 878 * @hltk: HLTK to be used for secured 11az measurement 879 * @tk: TK to be used for secured 11az measurement 880 * @calib: An array of calibration values per FTM rx bandwidth. 881 * If &IWL_INITIATOR_AP_FLAGS_USE_CALIB is set, the fw will use the 882 * calibration value that corresponds to the rx bandwidth of the FTM 883 * frame. 884 * @beacon_interval: beacon interval of the AP in TUs. Only required if 885 * &IWL_INITIATOR_AP_FLAGS_TB is set. 886 * @rx_pn: the next expected PN for protected management frames Rx. LE byte 887 * order. Only valid if &IWL_INITIATOR_AP_FLAGS_SECURED is set and sta_id 888 * is set to &IWL_MVM_INVALID_STA. 889 * @tx_pn: the next PN to use for protected management frames Tx. LE byte 890 * order. Only valid if &IWL_INITIATOR_AP_FLAGS_SECURED is set and sta_id 891 * is set to &IWL_MVM_INVALID_STA. 892 * @r2i_ndp_params: parameters for R2I NDP ranging negotiation. 893 * bits 0 - 2: max LTF repetitions 894 * bits 3 - 5: max number of spatial streams 895 * bits 6 - 7: reserved 896 * @i2r_ndp_params: parameters for I2R NDP ranging negotiation. 897 * bits 0 - 2: max LTF repetitions 898 * bits 3 - 5: max number of spatial streams (supported values are < 2) 899 * bits 6 - 7: reserved 900 * @r2i_max_total_ltf: R2I Max Total LTFs for NDP ranging negotiation. 901 * One of &enum ieee80211_range_params_max_total_ltf. 902 * @i2r_max_total_ltf: I2R Max Total LTFs for NDP ranging negotiation. 903 * One of &enum ieee80211_range_params_max_total_ltf. 904 */ 905 struct iwl_tof_range_req_ap_entry_v8 { 906 __le32 initiator_ap_flags; 907 u8 channel_num; 908 u8 format_bw; 909 u8 ctrl_ch_position; 910 u8 ftmr_max_retries; 911 u8 bssid[ETH_ALEN]; 912 __le16 burst_period; 913 u8 samples_per_burst; 914 u8 num_of_bursts; 915 u8 sta_id; 916 u8 cipher; 917 u8 hltk[HLTK_11AZ_LEN]; 918 u8 tk[TK_11AZ_LEN]; 919 __le16 calib[IWL_TOF_BW_NUM]; 920 __le16 beacon_interval; 921 u8 rx_pn[IEEE80211_CCMP_PN_LEN]; 922 u8 tx_pn[IEEE80211_CCMP_PN_LEN]; 923 u8 r2i_ndp_params; 924 u8 i2r_ndp_params; 925 u8 r2i_max_total_ltf; 926 u8 i2r_max_total_ltf; 927 } __packed; /* LOCATION_RANGE_REQ_AP_ENTRY_CMD_API_S_VER_8 */ 928 929 /** 930 * struct iwl_tof_range_req_ap_entry_v9 - AP configuration parameters 931 * @initiator_ap_flags: see &enum iwl_initiator_ap_flags. 932 * @channel_num: AP Channel number 933 * @format_bw: bits 0 - 3: &enum iwl_location_frame_format. 934 * bits 4 - 7: &enum iwl_location_bw. 935 * @ctrl_ch_position: Coding of the control channel position relative to the 936 * center frequency, see iwl_mvm_get_ctrl_pos(). 937 * @ftmr_max_retries: Max number of retries to send the FTMR in case of no 938 * reply from the AP. 939 * @bssid: AP's BSSID 940 * @burst_period: For EDCA based ranging: Recommended value to be sent to the 941 * AP. Measurement periodicity In units of 100ms. ignored if 942 * num_of_bursts_exp = 0. 943 * For non trigger based NDP ranging, the maximum time between 944 * measurements in units of milliseconds. 945 * @samples_per_burst: the number of FTMs pairs in single Burst (1-31); 946 * @num_of_bursts: Recommended value to be sent to the AP. 2s Exponent of 947 * the number of measurement iterations (min 2^0 = 1, max 2^14) 948 * @sta_id: the station id of the AP. Only relevant when associated to the AP, 949 * otherwise should be set to &IWL_MVM_INVALID_STA. 950 * @cipher: pairwise cipher suite for secured measurement. 951 * &enum iwl_location_cipher. 952 * @hltk: HLTK to be used for secured 11az measurement 953 * @tk: TK to be used for secured 11az measurement 954 * @calib: An array of calibration values per FTM rx bandwidth. 955 * If &IWL_INITIATOR_AP_FLAGS_USE_CALIB is set, the fw will use the 956 * calibration value that corresponds to the rx bandwidth of the FTM 957 * frame. 958 * @beacon_interval: beacon interval of the AP in TUs. Only required if 959 * &IWL_INITIATOR_AP_FLAGS_TB is set. 960 * @bss_color: the BSS color of the responder. Only valid if 961 * &IWL_INITIATOR_AP_FLAGS_TB or &IWL_INITIATOR_AP_FLAGS_NON_TB is set. 962 * @rx_pn: the next expected PN for protected management frames Rx. LE byte 963 * order. Only valid if &IWL_INITIATOR_AP_FLAGS_SECURED is set and sta_id 964 * is set to &IWL_MVM_INVALID_STA. 965 * @tx_pn: the next PN to use for protected management frames Tx. LE byte 966 * order. Only valid if &IWL_INITIATOR_AP_FLAGS_SECURED is set and sta_id 967 * is set to &IWL_MVM_INVALID_STA. 968 * @r2i_ndp_params: parameters for R2I NDP ranging negotiation. 969 * bits 0 - 2: max LTF repetitions 970 * bits 3 - 5: max number of spatial streams 971 * bits 6 - 7: reserved 972 * @i2r_ndp_params: parameters for I2R NDP ranging negotiation. 973 * bits 0 - 2: max LTF repetitions 974 * bits 3 - 5: max number of spatial streams (supported values are < 2) 975 * bits 6 - 7: reserved 976 * @r2i_max_total_ltf: R2I Max Total LTFs for NDP ranging negotiation. 977 * One of &enum ieee80211_range_params_max_total_ltf. 978 * @i2r_max_total_ltf: I2R Max Total LTFs for NDP ranging negotiation. 979 * One of &enum ieee80211_range_params_max_total_ltf. 980 * @bss_color: the BSS color of the responder. Only valid if 981 * &IWL_INITIATOR_AP_FLAGS_NON_TB or &IWL_INITIATOR_AP_FLAGS_TB is set. 982 * @band: 0 for 5.2 GHz, 1 for 2.4 GHz, 2 for 6GHz 983 * @min_time_between_msr: For non trigger based NDP ranging, the minimum time 984 * between measurements in units of milliseconds 985 */ 986 struct iwl_tof_range_req_ap_entry_v9 { 987 __le32 initiator_ap_flags; 988 u8 channel_num; 989 u8 format_bw; 990 u8 ctrl_ch_position; 991 u8 ftmr_max_retries; 992 u8 bssid[ETH_ALEN]; 993 __le16 burst_period; 994 u8 samples_per_burst; 995 u8 num_of_bursts; 996 u8 sta_id; 997 u8 cipher; 998 u8 hltk[HLTK_11AZ_LEN]; 999 u8 tk[TK_11AZ_LEN]; 1000 __le16 calib[IWL_TOF_BW_NUM]; 1001 u16 beacon_interval; 1002 u8 rx_pn[IEEE80211_CCMP_PN_LEN]; 1003 u8 tx_pn[IEEE80211_CCMP_PN_LEN]; 1004 u8 r2i_ndp_params; 1005 u8 i2r_ndp_params; 1006 u8 r2i_max_total_ltf; 1007 u8 i2r_max_total_ltf; 1008 u8 bss_color; 1009 u8 band; 1010 __le16 min_time_between_msr; 1011 } __packed; /* LOCATION_RANGE_REQ_AP_ENTRY_CMD_API_S_VER_9 */ 1012 1013 /** 1014 * struct iwl_tof_range_req_ap_entry_v10 - AP configuration parameters 1015 * @initiator_ap_flags: see &enum iwl_initiator_ap_flags. 1016 * @band: 0 for 5.2 GHz, 1 for 2.4 GHz, 2 for 6GHz 1017 * @channel_num: AP Channel number 1018 * @format_bw: bits 0 - 3: &enum iwl_location_frame_format. 1019 * bits 4 - 7: &enum iwl_location_bw. 1020 * @ctrl_ch_position: Coding of the control channel position relative to the 1021 * center frequency, see iwl_mvm_get_ctrl_pos(). 1022 * @bssid: AP's BSSID 1023 * @burst_period: For EDCA based ranging: Recommended value to be sent to the 1024 * AP. Measurement periodicity In units of 100ms. ignored if 1025 * num_of_bursts_exp = 0. 1026 * For non trigger based NDP ranging, the maximum time between 1027 * measurements in units of milliseconds. 1028 * @samples_per_burst: the number of FTMs pairs in single Burst (1-31); 1029 * @num_of_bursts: Recommended value to be sent to the AP. 2s Exponent of 1030 * the number of measurement iterations (min 2^0 = 1, max 2^14) 1031 * @sta_id: the station id of the AP. Only relevant when associated to the AP, 1032 * otherwise should be set to &IWL_MVM_INVALID_STA. 1033 * @cipher: pairwise cipher suite for secured measurement. 1034 * &enum iwl_location_cipher. 1035 * @hltk: HLTK to be used for secured 11az measurement 1036 * @tk: TK to be used for secured 11az measurement 1037 * @calib: An array of calibration values per FTM rx bandwidth. 1038 * If &IWL_INITIATOR_AP_FLAGS_USE_CALIB is set, the fw will use the 1039 * calibration value that corresponds to the rx bandwidth of the FTM 1040 * frame. 1041 * @beacon_interval: beacon interval of the AP in TUs. Only required if 1042 * &IWL_INITIATOR_AP_FLAGS_TB is set. 1043 * @rx_pn: the next expected PN for protected management frames Rx. LE byte 1044 * order. Only valid if &IWL_INITIATOR_AP_FLAGS_SECURED is set and sta_id 1045 * is set to &IWL_MVM_INVALID_STA. 1046 * @tx_pn: the next PN to use for protected management frames Tx. LE byte 1047 * order. Only valid if &IWL_INITIATOR_AP_FLAGS_SECURED is set and sta_id 1048 * is set to &IWL_MVM_INVALID_STA. 1049 * @r2i_ndp_params: parameters for R2I NDP ranging negotiation. 1050 * bits 0 - 2: max LTF repetitions 1051 * bits 3 - 5: max number of spatial streams 1052 * bits 6 - 7: max total LTFs. One of 1053 * &enum ieee80211_range_params_max_total_ltf. 1054 * @i2r_ndp_params: parameters for I2R NDP ranging negotiation. 1055 * bits 0 - 2: max LTF repetitions 1056 * bits 3 - 5: max number of spatial streams (supported values are < 2) 1057 * bits 6 - 7: max total LTFs. One of 1058 * &enum ieee80211_range_params_max_total_ltf. 1059 * @min_time_between_msr: For non trigger based NDP ranging, the minimum time 1060 * between measurements in units of milliseconds 1061 */ 1062 struct iwl_tof_range_req_ap_entry_v10 { 1063 __le32 initiator_ap_flags; 1064 u8 band; 1065 u8 channel_num; 1066 u8 format_bw; 1067 u8 ctrl_ch_position; 1068 u8 bssid[ETH_ALEN]; 1069 __le16 burst_period; 1070 u8 samples_per_burst; 1071 u8 num_of_bursts; 1072 u8 sta_id; 1073 u8 cipher; 1074 u8 hltk[HLTK_11AZ_LEN]; 1075 u8 tk[TK_11AZ_LEN]; 1076 __le16 calib[IWL_TOF_BW_NUM]; 1077 __le16 beacon_interval; 1078 u8 rx_pn[IEEE80211_CCMP_PN_LEN]; 1079 u8 tx_pn[IEEE80211_CCMP_PN_LEN]; 1080 u8 r2i_ndp_params; 1081 u8 i2r_ndp_params; 1082 __le16 min_time_between_msr; 1083 } __packed; /* LOCATION_RANGE_REQ_AP_ENTRY_CMD_API_S_VER_9 */ 1084 1085 /** 1086 * enum iwl_tof_response_mode 1087 * @IWL_MVM_TOF_RESPONSE_ASAP: report each AP measurement separately as soon as 1088 * possible (not supported for this release) 1089 * @IWL_MVM_TOF_RESPONSE_TIMEOUT: report all AP measurements as a batch upon 1090 * timeout expiration 1091 * @IWL_MVM_TOF_RESPONSE_COMPLETE: report all AP measurements as a batch at the 1092 * earlier of: measurements completion / timeout 1093 * expiration. 1094 */ 1095 enum iwl_tof_response_mode { 1096 IWL_MVM_TOF_RESPONSE_ASAP, 1097 IWL_MVM_TOF_RESPONSE_TIMEOUT, 1098 IWL_MVM_TOF_RESPONSE_COMPLETE, 1099 }; 1100 1101 /** 1102 * enum iwl_tof_initiator_flags 1103 * 1104 * @IWL_TOF_INITIATOR_FLAGS_FAST_ALGO_DISABLED: disable fast algo, meaning run 1105 * the algo on ant A+B, instead of only one of them. 1106 * @IWL_TOF_INITIATOR_FLAGS_RX_CHAIN_SEL_A: open RX antenna A for FTMs RX 1107 * @IWL_TOF_INITIATOR_FLAGS_RX_CHAIN_SEL_B: open RX antenna B for FTMs RX 1108 * @IWL_TOF_INITIATOR_FLAGS_RX_CHAIN_SEL_C: open RX antenna C for FTMs RX 1109 * @IWL_TOF_INITIATOR_FLAGS_TX_CHAIN_SEL_A: use antenna A fo TX ACKs during FTM 1110 * @IWL_TOF_INITIATOR_FLAGS_TX_CHAIN_SEL_B: use antenna B fo TX ACKs during FTM 1111 * @IWL_TOF_INITIATOR_FLAGS_TX_CHAIN_SEL_C: use antenna C fo TX ACKs during FTM 1112 * @IWL_TOF_INITIATOR_FLAGS_MACADDR_RANDOM: use random mac address for FTM 1113 * @IWL_TOF_INITIATOR_FLAGS_SPECIFIC_CALIB: use the specific calib value from 1114 * the range request command 1115 * @IWL_TOF_INITIATOR_FLAGS_COMMON_CALIB: use the common calib value from the 1116 * ragne request command 1117 * @IWL_TOF_INITIATOR_FLAGS_NON_ASAP_SUPPORT: support non-asap measurements 1118 */ 1119 enum iwl_tof_initiator_flags { 1120 IWL_TOF_INITIATOR_FLAGS_FAST_ALGO_DISABLED = BIT(0), 1121 IWL_TOF_INITIATOR_FLAGS_RX_CHAIN_SEL_A = BIT(1), 1122 IWL_TOF_INITIATOR_FLAGS_RX_CHAIN_SEL_B = BIT(2), 1123 IWL_TOF_INITIATOR_FLAGS_RX_CHAIN_SEL_C = BIT(3), 1124 IWL_TOF_INITIATOR_FLAGS_TX_CHAIN_SEL_A = BIT(4), 1125 IWL_TOF_INITIATOR_FLAGS_TX_CHAIN_SEL_B = BIT(5), 1126 IWL_TOF_INITIATOR_FLAGS_TX_CHAIN_SEL_C = BIT(6), 1127 IWL_TOF_INITIATOR_FLAGS_MACADDR_RANDOM = BIT(7), 1128 IWL_TOF_INITIATOR_FLAGS_SPECIFIC_CALIB = BIT(15), 1129 IWL_TOF_INITIATOR_FLAGS_COMMON_CALIB = BIT(16), 1130 IWL_TOF_INITIATOR_FLAGS_NON_ASAP_SUPPORT = BIT(20), 1131 }; /* LOCATION_RANGE_REQ_CMD_API_S_VER_5 */ 1132 1133 #define IWL_MVM_TOF_MAX_APS 5 1134 #define IWL_MVM_TOF_MAX_TWO_SIDED_APS 5 1135 1136 /** 1137 * struct iwl_tof_range_req_cmd_v5 - start measurement cmd 1138 * @initiator_flags: see flags @ iwl_tof_initiator_flags 1139 * @request_id: A Token incremented per request. The same Token will be 1140 * sent back in the range response 1141 * @initiator: 0- NW initiated, 1 - Client Initiated 1142 * @one_sided_los_disable: '0'- run ML-Algo for both ToF/OneSided, 1143 * '1' - run ML-Algo for ToF only 1144 * @req_timeout: Requested timeout of the response in units of 100ms. 1145 * This is equivalent to the session time configured to the 1146 * LMAC in Initiator Request 1147 * @report_policy: Supported partially for this release: For current release - 1148 * the range report will be uploaded as a batch when ready or 1149 * when the session is done (successfully / partially). 1150 * one of iwl_tof_response_mode. 1151 * @reserved0: reserved 1152 * @num_of_ap: Number of APs to measure (error if > IWL_MVM_TOF_MAX_APS) 1153 * @macaddr_random: '0' Use default source MAC address (i.e. p2_p), 1154 * '1' Use MAC Address randomization according to the below 1155 * @range_req_bssid: ranging request BSSID 1156 * @macaddr_template: MAC address template to use for non-randomized bits 1157 * @macaddr_mask: Bits set to 0 shall be copied from the MAC address template. 1158 * Bits set to 1 shall be randomized by the UMAC 1159 * @ftm_rx_chains: Rx chain to open to receive Responder's FTMs (XVT) 1160 * @ftm_tx_chains: Tx chain to send the ack to the Responder FTM (XVT) 1161 * @common_calib: The common calib value to inject to this measurement calc 1162 * @specific_calib: The specific calib value to inject to this measurement calc 1163 * @ap: per-AP request data 1164 */ 1165 struct iwl_tof_range_req_cmd_v5 { 1166 __le32 initiator_flags; 1167 u8 request_id; 1168 u8 initiator; 1169 u8 one_sided_los_disable; 1170 u8 req_timeout; 1171 u8 report_policy; 1172 u8 reserved0; 1173 u8 num_of_ap; 1174 u8 macaddr_random; 1175 u8 range_req_bssid[ETH_ALEN]; 1176 u8 macaddr_template[ETH_ALEN]; 1177 u8 macaddr_mask[ETH_ALEN]; 1178 u8 ftm_rx_chains; 1179 u8 ftm_tx_chains; 1180 __le16 common_calib; 1181 __le16 specific_calib; 1182 struct iwl_tof_range_req_ap_entry_v2 ap[IWL_MVM_TOF_MAX_APS]; 1183 } __packed; 1184 /* LOCATION_RANGE_REQ_CMD_API_S_VER_5 */ 1185 1186 /** 1187 * struct iwl_tof_range_req_cmd_v7 - start measurement cmd 1188 * @initiator_flags: see flags @ iwl_tof_initiator_flags 1189 * @request_id: A Token incremented per request. The same Token will be 1190 * sent back in the range response 1191 * @num_of_ap: Number of APs to measure (error if > IWL_MVM_TOF_MAX_APS) 1192 * @range_req_bssid: ranging request BSSID 1193 * @macaddr_mask: Bits set to 0 shall be copied from the MAC address template. 1194 * Bits set to 1 shall be randomized by the UMAC 1195 * @macaddr_template: MAC address template to use for non-randomized bits 1196 * @req_timeout_ms: Requested timeout of the response in units of milliseconds. 1197 * This is the session time for completing the measurement. 1198 * @tsf_mac_id: report the measurement start time for each ap in terms of the 1199 * TSF of this mac id. 0xff to disable TSF reporting. 1200 * @common_calib: The common calib value to inject to this measurement calc 1201 * @specific_calib: The specific calib value to inject to this measurement calc 1202 * @ap: per-AP request data, see &struct iwl_tof_range_req_ap_entry_v2. 1203 */ 1204 struct iwl_tof_range_req_cmd_v7 { 1205 __le32 initiator_flags; 1206 u8 request_id; 1207 u8 num_of_ap; 1208 u8 range_req_bssid[ETH_ALEN]; 1209 u8 macaddr_mask[ETH_ALEN]; 1210 u8 macaddr_template[ETH_ALEN]; 1211 __le32 req_timeout_ms; 1212 __le32 tsf_mac_id; 1213 __le16 common_calib; 1214 __le16 specific_calib; 1215 struct iwl_tof_range_req_ap_entry_v3 ap[IWL_MVM_TOF_MAX_APS]; 1216 } __packed; /* LOCATION_RANGE_REQ_CMD_API_S_VER_7 */ 1217 1218 /** 1219 * struct iwl_tof_range_req_cmd_v8 - start measurement cmd 1220 * @initiator_flags: see flags @ iwl_tof_initiator_flags 1221 * @request_id: A Token incremented per request. The same Token will be 1222 * sent back in the range response 1223 * @num_of_ap: Number of APs to measure (error if > IWL_MVM_TOF_MAX_APS) 1224 * @range_req_bssid: ranging request BSSID 1225 * @macaddr_mask: Bits set to 0 shall be copied from the MAC address template. 1226 * Bits set to 1 shall be randomized by the UMAC 1227 * @macaddr_template: MAC address template to use for non-randomized bits 1228 * @req_timeout_ms: Requested timeout of the response in units of milliseconds. 1229 * This is the session time for completing the measurement. 1230 * @tsf_mac_id: report the measurement start time for each ap in terms of the 1231 * TSF of this mac id. 0xff to disable TSF reporting. 1232 * @common_calib: The common calib value to inject to this measurement calc 1233 * @specific_calib: The specific calib value to inject to this measurement calc 1234 * @ap: per-AP request data, see &struct iwl_tof_range_req_ap_entry_v2. 1235 */ 1236 struct iwl_tof_range_req_cmd_v8 { 1237 __le32 initiator_flags; 1238 u8 request_id; 1239 u8 num_of_ap; 1240 u8 range_req_bssid[ETH_ALEN]; 1241 u8 macaddr_mask[ETH_ALEN]; 1242 u8 macaddr_template[ETH_ALEN]; 1243 __le32 req_timeout_ms; 1244 __le32 tsf_mac_id; 1245 __le16 common_calib; 1246 __le16 specific_calib; 1247 struct iwl_tof_range_req_ap_entry_v4 ap[IWL_MVM_TOF_MAX_APS]; 1248 } __packed; /* LOCATION_RANGE_REQ_CMD_API_S_VER_8 */ 1249 1250 /** 1251 * struct iwl_tof_range_req_cmd_v9 - start measurement cmd 1252 * @initiator_flags: see flags @ iwl_tof_initiator_flags 1253 * @request_id: A Token incremented per request. The same Token will be 1254 * sent back in the range response 1255 * @num_of_ap: Number of APs to measure (error if > IWL_MVM_TOF_MAX_APS) 1256 * @range_req_bssid: ranging request BSSID 1257 * @macaddr_mask: Bits set to 0 shall be copied from the MAC address template. 1258 * Bits set to 1 shall be randomized by the UMAC 1259 * @macaddr_template: MAC address template to use for non-randomized bits 1260 * @req_timeout_ms: Requested timeout of the response in units of milliseconds. 1261 * This is the session time for completing the measurement. 1262 * @tsf_mac_id: report the measurement start time for each ap in terms of the 1263 * TSF of this mac id. 0xff to disable TSF reporting. 1264 * @ap: per-AP request data, see &struct iwl_tof_range_req_ap_entry_v2. 1265 */ 1266 struct iwl_tof_range_req_cmd_v9 { 1267 __le32 initiator_flags; 1268 u8 request_id; 1269 u8 num_of_ap; 1270 u8 range_req_bssid[ETH_ALEN]; 1271 u8 macaddr_mask[ETH_ALEN]; 1272 u8 macaddr_template[ETH_ALEN]; 1273 __le32 req_timeout_ms; 1274 __le32 tsf_mac_id; 1275 struct iwl_tof_range_req_ap_entry_v6 ap[IWL_MVM_TOF_MAX_APS]; 1276 } __packed; /* LOCATION_RANGE_REQ_CMD_API_S_VER_9 */ 1277 1278 /** 1279 * struct iwl_tof_range_req_cmd_v11 - start measurement cmd 1280 * @initiator_flags: see flags @ iwl_tof_initiator_flags 1281 * @request_id: A Token incremented per request. The same Token will be 1282 * sent back in the range response 1283 * @num_of_ap: Number of APs to measure (error if > IWL_MVM_TOF_MAX_APS) 1284 * @range_req_bssid: ranging request BSSID 1285 * @macaddr_mask: Bits set to 0 shall be copied from the MAC address template. 1286 * Bits set to 1 shall be randomized by the UMAC 1287 * @macaddr_template: MAC address template to use for non-randomized bits 1288 * @req_timeout_ms: Requested timeout of the response in units of milliseconds. 1289 * This is the session time for completing the measurement. 1290 * @tsf_mac_id: report the measurement start time for each ap in terms of the 1291 * TSF of this mac id. 0xff to disable TSF reporting. 1292 * @ap: per-AP request data, see &struct iwl_tof_range_req_ap_entry_v2. 1293 */ 1294 struct iwl_tof_range_req_cmd_v11 { 1295 __le32 initiator_flags; 1296 u8 request_id; 1297 u8 num_of_ap; 1298 u8 range_req_bssid[ETH_ALEN]; 1299 u8 macaddr_mask[ETH_ALEN]; 1300 u8 macaddr_template[ETH_ALEN]; 1301 __le32 req_timeout_ms; 1302 __le32 tsf_mac_id; 1303 struct iwl_tof_range_req_ap_entry_v7 ap[IWL_MVM_TOF_MAX_APS]; 1304 } __packed; /* LOCATION_RANGE_REQ_CMD_API_S_VER_11 */ 1305 1306 /** 1307 * struct iwl_tof_range_req_cmd_v12 - start measurement cmd 1308 * @initiator_flags: see flags @ iwl_tof_initiator_flags 1309 * @request_id: A Token incremented per request. The same Token will be 1310 * sent back in the range response 1311 * @num_of_ap: Number of APs to measure (error if > IWL_MVM_TOF_MAX_APS) 1312 * @range_req_bssid: ranging request BSSID 1313 * @macaddr_mask: Bits set to 0 shall be copied from the MAC address template. 1314 * Bits set to 1 shall be randomized by the UMAC 1315 * @macaddr_template: MAC address template to use for non-randomized bits 1316 * @req_timeout_ms: Requested timeout of the response in units of milliseconds. 1317 * This is the session time for completing the measurement. 1318 * @tsf_mac_id: report the measurement start time for each ap in terms of the 1319 * TSF of this mac id. 0xff to disable TSF reporting. 1320 * @ap: per-AP request data, see &struct iwl_tof_range_req_ap_entry_v2. 1321 */ 1322 struct iwl_tof_range_req_cmd_v12 { 1323 __le32 initiator_flags; 1324 u8 request_id; 1325 u8 num_of_ap; 1326 u8 range_req_bssid[ETH_ALEN]; 1327 u8 macaddr_mask[ETH_ALEN]; 1328 u8 macaddr_template[ETH_ALEN]; 1329 __le32 req_timeout_ms; 1330 __le32 tsf_mac_id; 1331 struct iwl_tof_range_req_ap_entry_v8 ap[IWL_MVM_TOF_MAX_APS]; 1332 } __packed; /* LOCATION_RANGE_REQ_CMD_API_S_VER_12 */ 1333 1334 /** 1335 * struct iwl_tof_range_req_cmd_v13 - start measurement cmd 1336 * @initiator_flags: see flags @ iwl_tof_initiator_flags 1337 * @request_id: A Token incremented per request. The same Token will be 1338 * sent back in the range response 1339 * @num_of_ap: Number of APs to measure (error if > IWL_MVM_TOF_MAX_APS) 1340 * @range_req_bssid: ranging request BSSID 1341 * @macaddr_mask: Bits set to 0 shall be copied from the MAC address template. 1342 * Bits set to 1 shall be randomized by the UMAC 1343 * @macaddr_template: MAC address template to use for non-randomized bits 1344 * @req_timeout_ms: Requested timeout of the response in units of milliseconds. 1345 * This is the session time for completing the measurement. 1346 * @tsf_mac_id: report the measurement start time for each ap in terms of the 1347 * TSF of this mac id. 0xff to disable TSF reporting. 1348 * @ap: per-AP request data, see &struct iwl_tof_range_req_ap_entry_v9. 1349 */ 1350 struct iwl_tof_range_req_cmd_v13 { 1351 __le32 initiator_flags; 1352 u8 request_id; 1353 u8 num_of_ap; 1354 u8 range_req_bssid[ETH_ALEN]; 1355 u8 macaddr_mask[ETH_ALEN]; 1356 u8 macaddr_template[ETH_ALEN]; 1357 __le32 req_timeout_ms; 1358 __le32 tsf_mac_id; 1359 struct iwl_tof_range_req_ap_entry_v9 ap[IWL_MVM_TOF_MAX_APS]; 1360 } __packed; /* LOCATION_RANGE_REQ_CMD_API_S_VER_13 */ 1361 1362 /** 1363 * struct iwl_tof_range_req_cmd_v14 - start measurement cmd 1364 * @initiator_flags: see flags @ iwl_tof_initiator_flags 1365 * @request_id: A Token incremented per request. The same Token will be 1366 * sent back in the range response 1367 * @num_of_ap: Number of APs to measure (error if > IWL_MVM_TOF_MAX_APS) 1368 * @range_req_bssid: ranging request BSSID 1369 * @macaddr_mask: Bits set to 0 shall be copied from the MAC address template. 1370 * Bits set to 1 shall be randomized by the UMAC 1371 * @macaddr_template: MAC address template to use for non-randomized bits 1372 * @req_timeout_ms: Requested timeout of the response in units of milliseconds. 1373 * This is the session time for completing the measurement. 1374 * @tsf_mac_id: report the measurement start time for each ap in terms of the 1375 * TSF of this mac id. 0xff to disable TSF reporting. 1376 * @ap: per-AP request data, see &struct iwl_tof_range_req_ap_entry_v10. 1377 */ 1378 struct iwl_tof_range_req_cmd_v14 { 1379 __le32 initiator_flags; 1380 u8 request_id; 1381 u8 num_of_ap; 1382 u8 range_req_bssid[ETH_ALEN]; 1383 u8 macaddr_mask[ETH_ALEN]; 1384 u8 macaddr_template[ETH_ALEN]; 1385 __le32 req_timeout_ms; 1386 __le32 tsf_mac_id; 1387 struct iwl_tof_range_req_ap_entry_v10 ap[IWL_MVM_TOF_MAX_APS]; 1388 } __packed; /* LOCATION_RANGE_REQ_CMD_API_S_VER_13 */ 1389 1390 /* 1391 * enum iwl_tof_range_request_status - status of the sent request 1392 * @IWL_TOF_RANGE_REQUEST_STATUS_SUCCESSFUL - FW successfully received the 1393 * request 1394 * @IWL_TOF_RANGE_REQUEST_STATUS_BUSY - FW is busy with a previous request, the 1395 * sent request will not be handled 1396 */ 1397 enum iwl_tof_range_request_status { 1398 IWL_TOF_RANGE_REQUEST_STATUS_SUCCESS, 1399 IWL_TOF_RANGE_REQUEST_STATUS_BUSY, 1400 }; 1401 1402 /** 1403 * enum iwl_tof_entry_status 1404 * 1405 * @IWL_TOF_ENTRY_SUCCESS: successful measurement. 1406 * @IWL_TOF_ENTRY_GENERAL_FAILURE: General failure. 1407 * @IWL_TOF_ENTRY_NO_RESPONSE: Responder didn't reply to the request. 1408 * @IWL_TOF_ENTRY_REQUEST_REJECTED: Responder rejected the request. 1409 * @IWL_TOF_ENTRY_NOT_SCHEDULED: Time event was scheduled but not called yet. 1410 * @IWL_TOF_ENTRY_TIMING_MEASURE_TIMEOUT: Time event triggered but no 1411 * measurement was completed. 1412 * @IWL_TOF_ENTRY_TARGET_DIFF_CH_CANNOT_CHANGE: No range due inability to switch 1413 * from the primary channel. 1414 * @IWL_TOF_ENTRY_RANGE_NOT_SUPPORTED: Device doesn't support FTM. 1415 * @IWL_TOF_ENTRY_REQUEST_ABORT_UNKNOWN_REASON: Request aborted due to unknown 1416 * reason. 1417 * @IWL_TOF_ENTRY_LOCATION_INVALID_T1_T4_TIME_STAMP: Failure due to invalid 1418 * T1/T4. 1419 * @IWL_TOF_ENTRY_11MC_PROTOCOL_FAILURE: Failure due to invalid FTM frame 1420 * structure. 1421 * @IWL_TOF_ENTRY_REQUEST_CANNOT_SCHED: Request cannot be scheduled. 1422 * @IWL_TOF_ENTRY_RESPONDER_CANNOT_COLABORATE: Responder cannot serve the 1423 * initiator for some period, period supplied in @refusal_period. 1424 * @IWL_TOF_ENTRY_BAD_REQUEST_ARGS: Bad request arguments. 1425 * @IWL_TOF_ENTRY_WIFI_NOT_ENABLED: Wifi not enabled. 1426 * @IWL_TOF_ENTRY_RESPONDER_OVERRIDE_PARAMS: Responder override the original 1427 * parameters within the current session. 1428 */ 1429 enum iwl_tof_entry_status { 1430 IWL_TOF_ENTRY_SUCCESS = 0, 1431 IWL_TOF_ENTRY_GENERAL_FAILURE = 1, 1432 IWL_TOF_ENTRY_NO_RESPONSE = 2, 1433 IWL_TOF_ENTRY_REQUEST_REJECTED = 3, 1434 IWL_TOF_ENTRY_NOT_SCHEDULED = 4, 1435 IWL_TOF_ENTRY_TIMING_MEASURE_TIMEOUT = 5, 1436 IWL_TOF_ENTRY_TARGET_DIFF_CH_CANNOT_CHANGE = 6, 1437 IWL_TOF_ENTRY_RANGE_NOT_SUPPORTED = 7, 1438 IWL_TOF_ENTRY_REQUEST_ABORT_UNKNOWN_REASON = 8, 1439 IWL_TOF_ENTRY_LOCATION_INVALID_T1_T4_TIME_STAMP = 9, 1440 IWL_TOF_ENTRY_11MC_PROTOCOL_FAILURE = 10, 1441 IWL_TOF_ENTRY_REQUEST_CANNOT_SCHED = 11, 1442 IWL_TOF_ENTRY_RESPONDER_CANNOT_COLABORATE = 12, 1443 IWL_TOF_ENTRY_BAD_REQUEST_ARGS = 13, 1444 IWL_TOF_ENTRY_WIFI_NOT_ENABLED = 14, 1445 IWL_TOF_ENTRY_RESPONDER_OVERRIDE_PARAMS = 15, 1446 }; /* LOCATION_RANGE_RSP_AP_ENTRY_NTFY_API_S_VER_2 */ 1447 1448 /** 1449 * struct iwl_tof_range_rsp_ap_entry_ntfy_v3 - AP parameters (response) 1450 * @bssid: BSSID of the AP 1451 * @measure_status: current APs measurement status, one of 1452 * &enum iwl_tof_entry_status. 1453 * @measure_bw: Current AP Bandwidth: 0 20MHz, 1 40MHz, 2 80MHz 1454 * @rtt: The Round Trip Time that took for the last measurement for 1455 * current AP [pSec] 1456 * @rtt_variance: The Variance of the RTT values measured for current AP 1457 * @rtt_spread: The Difference between the maximum and the minimum RTT 1458 * values measured for current AP in the current session [pSec] 1459 * @rssi: RSSI as uploaded in the Channel Estimation notification 1460 * @rssi_spread: The Difference between the maximum and the minimum RSSI values 1461 * measured for current AP in the current session 1462 * @reserved: reserved 1463 * @refusal_period: refusal period in case of 1464 * @IWL_TOF_ENTRY_RESPONDER_CANNOT_COLABORATE [sec] 1465 * @range: Measured range [cm] 1466 * @range_variance: Measured range variance [cm] 1467 * @timestamp: The GP2 Clock [usec] where Channel Estimation notification was 1468 * uploaded by the LMAC 1469 * @t2t3_initiator: as calculated from the algo in the initiator 1470 * @t1t4_responder: as calculated from the algo in the responder 1471 * @common_calib: Calib val that was used in for this AP measurement 1472 * @specific_calib: val that was used in for this AP measurement 1473 * @papd_calib_output: The result of the tof papd calibration that was injected 1474 * into the algorithm. 1475 */ 1476 struct iwl_tof_range_rsp_ap_entry_ntfy_v3 { 1477 u8 bssid[ETH_ALEN]; 1478 u8 measure_status; 1479 u8 measure_bw; 1480 __le32 rtt; 1481 __le32 rtt_variance; 1482 __le32 rtt_spread; 1483 s8 rssi; 1484 u8 rssi_spread; 1485 u8 reserved; 1486 u8 refusal_period; 1487 __le32 range; 1488 __le32 range_variance; 1489 __le32 timestamp; 1490 __le32 t2t3_initiator; 1491 __le32 t1t4_responder; 1492 __le16 common_calib; 1493 __le16 specific_calib; 1494 __le32 papd_calib_output; 1495 } __packed; /* LOCATION_RANGE_RSP_AP_ETRY_NTFY_API_S_VER_3 */ 1496 1497 /** 1498 * struct iwl_tof_range_rsp_ap_entry_ntfy_v4 - AP parameters (response) 1499 * @bssid: BSSID of the AP 1500 * @measure_status: current APs measurement status, one of 1501 * &enum iwl_tof_entry_status. 1502 * @measure_bw: Current AP Bandwidth: 0 20MHz, 1 40MHz, 2 80MHz 1503 * @rtt: The Round Trip Time that took for the last measurement for 1504 * current AP [pSec] 1505 * @rtt_variance: The Variance of the RTT values measured for current AP 1506 * @rtt_spread: The Difference between the maximum and the minimum RTT 1507 * values measured for current AP in the current session [pSec] 1508 * @rssi: RSSI as uploaded in the Channel Estimation notification 1509 * @rssi_spread: The Difference between the maximum and the minimum RSSI values 1510 * measured for current AP in the current session 1511 * @last_burst: 1 if no more FTM sessions are scheduled for this responder 1512 * @refusal_period: refusal period in case of 1513 * @IWL_TOF_ENTRY_RESPONDER_CANNOT_COLABORATE [sec] 1514 * @timestamp: The GP2 Clock [usec] where Channel Estimation notification was 1515 * uploaded by the LMAC 1516 * @start_tsf: measurement start time in TSF of the mac specified in the range 1517 * request 1518 * @rx_rate_n_flags: rate and flags of the last FTM frame received from this 1519 * responder 1520 * @tx_rate_n_flags: rate and flags of the last ack sent to this responder 1521 * @t2t3_initiator: as calculated from the algo in the initiator 1522 * @t1t4_responder: as calculated from the algo in the responder 1523 * @common_calib: Calib val that was used in for this AP measurement 1524 * @specific_calib: val that was used in for this AP measurement 1525 * @papd_calib_output: The result of the tof papd calibration that was injected 1526 * into the algorithm. 1527 */ 1528 struct iwl_tof_range_rsp_ap_entry_ntfy_v4 { 1529 u8 bssid[ETH_ALEN]; 1530 u8 measure_status; 1531 u8 measure_bw; 1532 __le32 rtt; 1533 __le32 rtt_variance; 1534 __le32 rtt_spread; 1535 s8 rssi; 1536 u8 rssi_spread; 1537 u8 last_burst; 1538 u8 refusal_period; 1539 __le32 timestamp; 1540 __le32 start_tsf; 1541 __le32 rx_rate_n_flags; 1542 __le32 tx_rate_n_flags; 1543 __le32 t2t3_initiator; 1544 __le32 t1t4_responder; 1545 __le16 common_calib; 1546 __le16 specific_calib; 1547 __le32 papd_calib_output; 1548 } __packed; /* LOCATION_RANGE_RSP_AP_ETRY_NTFY_API_S_VER_4 */ 1549 1550 /** 1551 * struct iwl_tof_range_rsp_ap_entry_ntfy_v5 - AP parameters (response) 1552 * @bssid: BSSID of the AP 1553 * @measure_status: current APs measurement status, one of 1554 * &enum iwl_tof_entry_status. 1555 * @measure_bw: Current AP Bandwidth: 0 20MHz, 1 40MHz, 2 80MHz 1556 * @rtt: The Round Trip Time that took for the last measurement for 1557 * current AP [pSec] 1558 * @rtt_variance: The Variance of the RTT values measured for current AP 1559 * @rtt_spread: The Difference between the maximum and the minimum RTT 1560 * values measured for current AP in the current session [pSec] 1561 * @rssi: RSSI as uploaded in the Channel Estimation notification 1562 * @rssi_spread: The Difference between the maximum and the minimum RSSI values 1563 * measured for current AP in the current session 1564 * @last_burst: 1 if no more FTM sessions are scheduled for this responder 1565 * @refusal_period: refusal period in case of 1566 * @IWL_TOF_ENTRY_RESPONDER_CANNOT_COLABORATE [sec] 1567 * @timestamp: The GP2 Clock [usec] where Channel Estimation notification was 1568 * uploaded by the LMAC 1569 * @start_tsf: measurement start time in TSF of the mac specified in the range 1570 * request 1571 * @rx_rate_n_flags: rate and flags of the last FTM frame received from this 1572 * responder 1573 * @tx_rate_n_flags: rate and flags of the last ack sent to this responder 1574 * @t2t3_initiator: as calculated from the algo in the initiator 1575 * @t1t4_responder: as calculated from the algo in the responder 1576 * @common_calib: Calib val that was used in for this AP measurement 1577 * @specific_calib: val that was used in for this AP measurement 1578 * @papd_calib_output: The result of the tof papd calibration that was injected 1579 * into the algorithm. 1580 * @rttConfidence: a value between 0 - 31 that represents the rtt accuracy. 1581 * @reserved: for alignment 1582 */ 1583 struct iwl_tof_range_rsp_ap_entry_ntfy_v5 { 1584 u8 bssid[ETH_ALEN]; 1585 u8 measure_status; 1586 u8 measure_bw; 1587 __le32 rtt; 1588 __le32 rtt_variance; 1589 __le32 rtt_spread; 1590 s8 rssi; 1591 u8 rssi_spread; 1592 u8 last_burst; 1593 u8 refusal_period; 1594 __le32 timestamp; 1595 __le32 start_tsf; 1596 __le32 rx_rate_n_flags; 1597 __le32 tx_rate_n_flags; 1598 __le32 t2t3_initiator; 1599 __le32 t1t4_responder; 1600 __le16 common_calib; 1601 __le16 specific_calib; 1602 __le32 papd_calib_output; 1603 u8 rttConfidence; 1604 u8 reserved[3]; 1605 } __packed; /* LOCATION_RANGE_RSP_AP_ETRY_NTFY_API_S_VER_5 */ 1606 1607 /** 1608 * struct iwl_tof_range_rsp_ap_entry_ntfy_v6 - AP parameters (response) 1609 * @bssid: BSSID of the AP 1610 * @measure_status: current APs measurement status, one of 1611 * &enum iwl_tof_entry_status. 1612 * @measure_bw: Current AP Bandwidth: 0 20MHz, 1 40MHz, 2 80MHz 1613 * @rtt: The Round Trip Time that took for the last measurement for 1614 * current AP [pSec] 1615 * @rtt_variance: The Variance of the RTT values measured for current AP 1616 * @rtt_spread: The Difference between the maximum and the minimum RTT 1617 * values measured for current AP in the current session [pSec] 1618 * @rssi: RSSI as uploaded in the Channel Estimation notification 1619 * @rssi_spread: The Difference between the maximum and the minimum RSSI values 1620 * measured for current AP in the current session 1621 * @last_burst: 1 if no more FTM sessions are scheduled for this responder 1622 * @refusal_period: refusal period in case of 1623 * @IWL_TOF_ENTRY_RESPONDER_CANNOT_COLABORATE [sec] 1624 * @timestamp: The GP2 Clock [usec] where Channel Estimation notification was 1625 * uploaded by the LMAC 1626 * @start_tsf: measurement start time in TSF of the mac specified in the range 1627 * request 1628 * @rx_rate_n_flags: rate and flags of the last FTM frame received from this 1629 * responder 1630 * @tx_rate_n_flags: rate and flags of the last ack sent to this responder 1631 * @t2t3_initiator: as calculated from the algo in the initiator 1632 * @t1t4_responder: as calculated from the algo in the responder 1633 * @common_calib: Calib val that was used in for this AP measurement 1634 * @specific_calib: val that was used in for this AP measurement 1635 * @papd_calib_output: The result of the tof papd calibration that was injected 1636 * into the algorithm. 1637 * @rttConfidence: a value between 0 - 31 that represents the rtt accuracy. 1638 * @reserved: for alignment 1639 * @rx_pn: the last PN used for this responder Rx in case PMF is configured in 1640 * LE byte order. 1641 * @tx_pn: the last PN used for this responder Tx in case PMF is configured in 1642 * LE byte order. 1643 */ 1644 struct iwl_tof_range_rsp_ap_entry_ntfy_v6 { 1645 u8 bssid[ETH_ALEN]; 1646 u8 measure_status; 1647 u8 measure_bw; 1648 __le32 rtt; 1649 __le32 rtt_variance; 1650 __le32 rtt_spread; 1651 s8 rssi; 1652 u8 rssi_spread; 1653 u8 last_burst; 1654 u8 refusal_period; 1655 __le32 timestamp; 1656 __le32 start_tsf; 1657 __le32 rx_rate_n_flags; 1658 __le32 tx_rate_n_flags; 1659 __le32 t2t3_initiator; 1660 __le32 t1t4_responder; 1661 __le16 common_calib; 1662 __le16 specific_calib; 1663 __le32 papd_calib_output; 1664 u8 rttConfidence; 1665 u8 reserved[3]; 1666 u8 rx_pn[IEEE80211_CCMP_PN_LEN]; 1667 u8 tx_pn[IEEE80211_CCMP_PN_LEN]; 1668 } __packed; /* LOCATION_RANGE_RSP_AP_ETRY_NTFY_API_S_VER_6, 1669 LOCATION_RANGE_RSP_AP_ETRY_NTFY_API_S_VER_7 */ 1670 1671 1672 /** 1673 * enum iwl_tof_response_status - tof response status 1674 * 1675 * @IWL_TOF_RESPONSE_SUCCESS: successful range. 1676 * @IWL_TOF_RESPONSE_TIMEOUT: request aborted due to timeout expiration. 1677 * partial result of ranges done so far is included in the response. 1678 * @IWL_TOF_RESPONSE_ABORTED: Measurement aborted by command. 1679 * @IWL_TOF_RESPONSE_FAILED: Measurement request command failed. 1680 */ 1681 enum iwl_tof_response_status { 1682 IWL_TOF_RESPONSE_SUCCESS = 0, 1683 IWL_TOF_RESPONSE_TIMEOUT = 1, 1684 IWL_TOF_RESPONSE_ABORTED = 4, 1685 IWL_TOF_RESPONSE_FAILED = 5, 1686 }; /* LOCATION_RNG_RSP_STATUS */ 1687 1688 /** 1689 * struct iwl_tof_range_rsp_ntfy_v5 - ranging response notification 1690 * @request_id: A Token ID of the corresponding Range request 1691 * @request_status: status of current measurement session, one of 1692 * &enum iwl_tof_response_status. 1693 * @last_in_batch: reprot policy (when not all responses are uploaded at once) 1694 * @num_of_aps: Number of APs to measure (error if > IWL_MVM_TOF_MAX_APS) 1695 * @ap: per-AP data 1696 */ 1697 struct iwl_tof_range_rsp_ntfy_v5 { 1698 u8 request_id; 1699 u8 request_status; 1700 u8 last_in_batch; 1701 u8 num_of_aps; 1702 struct iwl_tof_range_rsp_ap_entry_ntfy_v3 ap[IWL_MVM_TOF_MAX_APS]; 1703 } __packed; /* LOCATION_RANGE_RSP_NTFY_API_S_VER_5 */ 1704 1705 /** 1706 * struct iwl_tof_range_rsp_ntfy_v6 - ranging response notification 1707 * @request_id: A Token ID of the corresponding Range request 1708 * @num_of_aps: Number of APs results 1709 * @last_report: 1 if no more FTM sessions are scheduled, 0 otherwise. 1710 * @reserved: reserved 1711 * @ap: per-AP data 1712 */ 1713 struct iwl_tof_range_rsp_ntfy_v6 { 1714 u8 request_id; 1715 u8 num_of_aps; 1716 u8 last_report; 1717 u8 reserved; 1718 struct iwl_tof_range_rsp_ap_entry_ntfy_v4 ap[IWL_MVM_TOF_MAX_APS]; 1719 } __packed; /* LOCATION_RANGE_RSP_NTFY_API_S_VER_6 */ 1720 1721 /** 1722 * struct iwl_tof_range_rsp_ntfy_v7 - ranging response notification 1723 * @request_id: A Token ID of the corresponding Range request 1724 * @num_of_aps: Number of APs results 1725 * @last_report: 1 if no more FTM sessions are scheduled, 0 otherwise. 1726 * @reserved: reserved 1727 * @ap: per-AP data 1728 */ 1729 struct iwl_tof_range_rsp_ntfy_v7 { 1730 u8 request_id; 1731 u8 num_of_aps; 1732 u8 last_report; 1733 u8 reserved; 1734 struct iwl_tof_range_rsp_ap_entry_ntfy_v5 ap[IWL_MVM_TOF_MAX_APS]; 1735 } __packed; /* LOCATION_RANGE_RSP_NTFY_API_S_VER_7 */ 1736 1737 /** 1738 * struct iwl_tof_range_rsp_ntfy_v8 - ranging response notification 1739 * @request_id: A Token ID of the corresponding Range request 1740 * @num_of_aps: Number of APs results 1741 * @last_report: 1 if no more FTM sessions are scheduled, 0 otherwise. 1742 * @reserved: reserved 1743 * @ap: per-AP data 1744 */ 1745 struct iwl_tof_range_rsp_ntfy_v8 { 1746 u8 request_id; 1747 u8 num_of_aps; 1748 u8 last_report; 1749 u8 reserved; 1750 struct iwl_tof_range_rsp_ap_entry_ntfy_v6 ap[IWL_MVM_TOF_MAX_APS]; 1751 } __packed; /* LOCATION_RANGE_RSP_NTFY_API_S_VER_8, 1752 LOCATION_RANGE_RSP_NTFY_API_S_VER_9 */ 1753 1754 #define IWL_MVM_TOF_MCSI_BUF_SIZE (245) 1755 /** 1756 * struct iwl_tof_mcsi_notif - used for debug 1757 * @token: token ID for the current session 1758 * @role: '0' - initiator, '1' - responder 1759 * @reserved: reserved 1760 * @initiator_bssid: initiator machine 1761 * @responder_bssid: responder machine 1762 * @mcsi_buffer: debug data 1763 */ 1764 struct iwl_tof_mcsi_notif { 1765 u8 token; 1766 u8 role; 1767 __le16 reserved; 1768 u8 initiator_bssid[ETH_ALEN]; 1769 u8 responder_bssid[ETH_ALEN]; 1770 u8 mcsi_buffer[IWL_MVM_TOF_MCSI_BUF_SIZE * 4]; 1771 } __packed; 1772 1773 /** 1774 * struct iwl_tof_range_abort_cmd 1775 * @request_id: corresponds to a range request 1776 * @reserved: reserved 1777 */ 1778 struct iwl_tof_range_abort_cmd { 1779 u8 request_id; 1780 u8 reserved[3]; 1781 } __packed; 1782 1783 enum ftm_responder_stats_flags { 1784 FTM_RESP_STAT_NON_ASAP_STARTED = BIT(0), 1785 FTM_RESP_STAT_NON_ASAP_IN_WIN = BIT(1), 1786 FTM_RESP_STAT_NON_ASAP_OUT_WIN = BIT(2), 1787 FTM_RESP_STAT_TRIGGER_DUP = BIT(3), 1788 FTM_RESP_STAT_DUP = BIT(4), 1789 FTM_RESP_STAT_DUP_IN_WIN = BIT(5), 1790 FTM_RESP_STAT_DUP_OUT_WIN = BIT(6), 1791 FTM_RESP_STAT_SCHED_SUCCESS = BIT(7), 1792 FTM_RESP_STAT_ASAP_REQ = BIT(8), 1793 FTM_RESP_STAT_NON_ASAP_REQ = BIT(9), 1794 FTM_RESP_STAT_ASAP_RESP = BIT(10), 1795 FTM_RESP_STAT_NON_ASAP_RESP = BIT(11), 1796 FTM_RESP_STAT_FAIL_INITIATOR_INACTIVE = BIT(12), 1797 FTM_RESP_STAT_FAIL_INITIATOR_OUT_WIN = BIT(13), 1798 FTM_RESP_STAT_FAIL_INITIATOR_RETRY_LIM = BIT(14), 1799 FTM_RESP_STAT_FAIL_NEXT_SERVED = BIT(15), 1800 FTM_RESP_STAT_FAIL_TRIGGER_ERR = BIT(16), 1801 FTM_RESP_STAT_FAIL_GC = BIT(17), 1802 FTM_RESP_STAT_SUCCESS = BIT(18), 1803 FTM_RESP_STAT_INTEL_IE = BIT(19), 1804 FTM_RESP_STAT_INITIATOR_ACTIVE = BIT(20), 1805 FTM_RESP_STAT_MEASUREMENTS_AVAILABLE = BIT(21), 1806 FTM_RESP_STAT_TRIGGER_UNKNOWN = BIT(22), 1807 FTM_RESP_STAT_PROCESS_FAIL = BIT(23), 1808 FTM_RESP_STAT_ACK = BIT(24), 1809 FTM_RESP_STAT_NACK = BIT(25), 1810 FTM_RESP_STAT_INVALID_INITIATOR_ID = BIT(26), 1811 FTM_RESP_STAT_TIMER_MIN_DELTA = BIT(27), 1812 FTM_RESP_STAT_INITIATOR_REMOVED = BIT(28), 1813 FTM_RESP_STAT_INITIATOR_ADDED = BIT(29), 1814 FTM_RESP_STAT_ERR_LIST_FULL = BIT(30), 1815 FTM_RESP_STAT_INITIATOR_SCHED_NOW = BIT(31), 1816 }; /* RESP_IND_E */ 1817 1818 /** 1819 * struct iwl_ftm_responder_stats - FTM responder statistics 1820 * @addr: initiator address 1821 * @success_ftm: number of successful ftm frames 1822 * @ftm_per_burst: num of FTM frames that were received 1823 * @flags: &enum ftm_responder_stats_flags 1824 * @duration: actual duration of FTM 1825 * @allocated_duration: time that was allocated for this FTM session 1826 * @bw: FTM request bandwidth 1827 * @rate: FTM request rate 1828 * @reserved: for alingment and future use 1829 */ 1830 struct iwl_ftm_responder_stats { 1831 u8 addr[ETH_ALEN]; 1832 u8 success_ftm; 1833 u8 ftm_per_burst; 1834 __le32 flags; 1835 __le32 duration; 1836 __le32 allocated_duration; 1837 u8 bw; 1838 u8 rate; 1839 __le16 reserved; 1840 } __packed; /* TOF_RESPONDER_STATISTICS_NTFY_S_VER_2 */ 1841 1842 #define IWL_CSI_MAX_EXPECTED_CHUNKS 16 1843 1844 #define IWL_CSI_CHUNK_CTL_NUM_MASK_VER_1 0x0003 1845 #define IWL_CSI_CHUNK_CTL_IDX_MASK_VER_1 0x000c 1846 1847 #define IWL_CSI_CHUNK_CTL_NUM_MASK_VER_2 0x00ff 1848 #define IWL_CSI_CHUNK_CTL_IDX_MASK_VER_2 0xff00 1849 1850 struct iwl_csi_chunk_notification { 1851 __le32 token; 1852 __le16 seq; 1853 __le16 ctl; 1854 __le32 size; 1855 u8 data[]; 1856 } __packed; /* CSI_CHUNKS_HDR_NTFY_API_S_VER_1/VER_2 */ 1857 1858 #endif /* __iwl_fw_api_location_h__ */ 1859