1 // SPDX-License-Identifier: GPL-2.0-only 2 /****************************************************************************** 3 * 4 * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. 5 * 6 * Contact Information: 7 * Intel Linux Wireless <ilw@linux.intel.com> 8 * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 9 *****************************************************************************/ 10 11 #include <linux/kernel.h> 12 #include <linux/module.h> 13 #include <linux/etherdevice.h> 14 #include <linux/sched.h> 15 #include <linux/slab.h> 16 #include <linux/types.h> 17 #include <linux/lockdep.h> 18 #include <linux/pci.h> 19 #include <linux/dma-mapping.h> 20 #include <linux/delay.h> 21 #include <linux/skbuff.h> 22 #include <net/mac80211.h> 23 24 #include "common.h" 25 26 int 27 _il_poll_bit(struct il_priv *il, u32 addr, u32 bits, u32 mask, int timeout) 28 { 29 const int interval = 10; /* microseconds */ 30 int t = 0; 31 32 do { 33 if ((_il_rd(il, addr) & mask) == (bits & mask)) 34 return t; 35 udelay(interval); 36 t += interval; 37 } while (t < timeout); 38 39 return -ETIMEDOUT; 40 } 41 EXPORT_SYMBOL(_il_poll_bit); 42 43 void 44 il_set_bit(struct il_priv *p, u32 r, u32 m) 45 { 46 unsigned long reg_flags; 47 48 spin_lock_irqsave(&p->reg_lock, reg_flags); 49 _il_set_bit(p, r, m); 50 spin_unlock_irqrestore(&p->reg_lock, reg_flags); 51 } 52 EXPORT_SYMBOL(il_set_bit); 53 54 void 55 il_clear_bit(struct il_priv *p, u32 r, u32 m) 56 { 57 unsigned long reg_flags; 58 59 spin_lock_irqsave(&p->reg_lock, reg_flags); 60 _il_clear_bit(p, r, m); 61 spin_unlock_irqrestore(&p->reg_lock, reg_flags); 62 } 63 EXPORT_SYMBOL(il_clear_bit); 64 65 bool 66 _il_grab_nic_access(struct il_priv *il) 67 { 68 int ret; 69 u32 val; 70 71 /* this bit wakes up the NIC */ 72 _il_set_bit(il, CSR_GP_CNTRL, CSR_GP_CNTRL_REG_FLAG_MAC_ACCESS_REQ); 73 74 /* 75 * These bits say the device is running, and should keep running for 76 * at least a short while (at least as long as MAC_ACCESS_REQ stays 1), 77 * but they do not indicate that embedded SRAM is restored yet; 78 * 3945 and 4965 have volatile SRAM, and must save/restore contents 79 * to/from host DRAM when sleeping/waking for power-saving. 80 * Each direction takes approximately 1/4 millisecond; with this 81 * overhead, it's a good idea to grab and hold MAC_ACCESS_REQUEST if a 82 * series of register accesses are expected (e.g. reading Event Log), 83 * to keep device from sleeping. 84 * 85 * CSR_UCODE_DRV_GP1 register bit MAC_SLEEP == 0 indicates that 86 * SRAM is okay/restored. We don't check that here because this call 87 * is just for hardware register access; but GP1 MAC_SLEEP check is a 88 * good idea before accessing 3945/4965 SRAM (e.g. reading Event Log). 89 * 90 */ 91 ret = 92 _il_poll_bit(il, CSR_GP_CNTRL, CSR_GP_CNTRL_REG_VAL_MAC_ACCESS_EN, 93 (CSR_GP_CNTRL_REG_FLAG_MAC_CLOCK_READY | 94 CSR_GP_CNTRL_REG_FLAG_GOING_TO_SLEEP), 15000); 95 if (unlikely(ret < 0)) { 96 val = _il_rd(il, CSR_GP_CNTRL); 97 WARN_ONCE(1, "Timeout waiting for ucode processor access " 98 "(CSR_GP_CNTRL 0x%08x)\n", val); 99 _il_wr(il, CSR_RESET, CSR_RESET_REG_FLAG_FORCE_NMI); 100 return false; 101 } 102 103 return true; 104 } 105 EXPORT_SYMBOL_GPL(_il_grab_nic_access); 106 107 int 108 il_poll_bit(struct il_priv *il, u32 addr, u32 mask, int timeout) 109 { 110 const int interval = 10; /* microseconds */ 111 int t = 0; 112 113 do { 114 if ((il_rd(il, addr) & mask) == mask) 115 return t; 116 udelay(interval); 117 t += interval; 118 } while (t < timeout); 119 120 return -ETIMEDOUT; 121 } 122 EXPORT_SYMBOL(il_poll_bit); 123 124 u32 125 il_rd_prph(struct il_priv *il, u32 reg) 126 { 127 unsigned long reg_flags; 128 u32 val; 129 130 spin_lock_irqsave(&il->reg_lock, reg_flags); 131 _il_grab_nic_access(il); 132 val = _il_rd_prph(il, reg); 133 _il_release_nic_access(il); 134 spin_unlock_irqrestore(&il->reg_lock, reg_flags); 135 return val; 136 } 137 EXPORT_SYMBOL(il_rd_prph); 138 139 void 140 il_wr_prph(struct il_priv *il, u32 addr, u32 val) 141 { 142 unsigned long reg_flags; 143 144 spin_lock_irqsave(&il->reg_lock, reg_flags); 145 if (likely(_il_grab_nic_access(il))) { 146 _il_wr_prph(il, addr, val); 147 _il_release_nic_access(il); 148 } 149 spin_unlock_irqrestore(&il->reg_lock, reg_flags); 150 } 151 EXPORT_SYMBOL(il_wr_prph); 152 153 u32 154 il_read_targ_mem(struct il_priv *il, u32 addr) 155 { 156 unsigned long reg_flags; 157 u32 value; 158 159 spin_lock_irqsave(&il->reg_lock, reg_flags); 160 _il_grab_nic_access(il); 161 162 _il_wr(il, HBUS_TARG_MEM_RADDR, addr); 163 value = _il_rd(il, HBUS_TARG_MEM_RDAT); 164 165 _il_release_nic_access(il); 166 spin_unlock_irqrestore(&il->reg_lock, reg_flags); 167 return value; 168 } 169 EXPORT_SYMBOL(il_read_targ_mem); 170 171 void 172 il_write_targ_mem(struct il_priv *il, u32 addr, u32 val) 173 { 174 unsigned long reg_flags; 175 176 spin_lock_irqsave(&il->reg_lock, reg_flags); 177 if (likely(_il_grab_nic_access(il))) { 178 _il_wr(il, HBUS_TARG_MEM_WADDR, addr); 179 _il_wr(il, HBUS_TARG_MEM_WDAT, val); 180 _il_release_nic_access(il); 181 } 182 spin_unlock_irqrestore(&il->reg_lock, reg_flags); 183 } 184 EXPORT_SYMBOL(il_write_targ_mem); 185 186 const char * 187 il_get_cmd_string(u8 cmd) 188 { 189 switch (cmd) { 190 IL_CMD(N_ALIVE); 191 IL_CMD(N_ERROR); 192 IL_CMD(C_RXON); 193 IL_CMD(C_RXON_ASSOC); 194 IL_CMD(C_QOS_PARAM); 195 IL_CMD(C_RXON_TIMING); 196 IL_CMD(C_ADD_STA); 197 IL_CMD(C_REM_STA); 198 IL_CMD(C_WEPKEY); 199 IL_CMD(N_3945_RX); 200 IL_CMD(C_TX); 201 IL_CMD(C_RATE_SCALE); 202 IL_CMD(C_LEDS); 203 IL_CMD(C_TX_LINK_QUALITY_CMD); 204 IL_CMD(C_CHANNEL_SWITCH); 205 IL_CMD(N_CHANNEL_SWITCH); 206 IL_CMD(C_SPECTRUM_MEASUREMENT); 207 IL_CMD(N_SPECTRUM_MEASUREMENT); 208 IL_CMD(C_POWER_TBL); 209 IL_CMD(N_PM_SLEEP); 210 IL_CMD(N_PM_DEBUG_STATS); 211 IL_CMD(C_SCAN); 212 IL_CMD(C_SCAN_ABORT); 213 IL_CMD(N_SCAN_START); 214 IL_CMD(N_SCAN_RESULTS); 215 IL_CMD(N_SCAN_COMPLETE); 216 IL_CMD(N_BEACON); 217 IL_CMD(C_TX_BEACON); 218 IL_CMD(C_TX_PWR_TBL); 219 IL_CMD(C_BT_CONFIG); 220 IL_CMD(C_STATS); 221 IL_CMD(N_STATS); 222 IL_CMD(N_CARD_STATE); 223 IL_CMD(N_MISSED_BEACONS); 224 IL_CMD(C_CT_KILL_CONFIG); 225 IL_CMD(C_SENSITIVITY); 226 IL_CMD(C_PHY_CALIBRATION); 227 IL_CMD(N_RX_PHY); 228 IL_CMD(N_RX_MPDU); 229 IL_CMD(N_RX); 230 IL_CMD(N_COMPRESSED_BA); 231 default: 232 return "UNKNOWN"; 233 234 } 235 } 236 EXPORT_SYMBOL(il_get_cmd_string); 237 238 #define HOST_COMPLETE_TIMEOUT (HZ / 2) 239 240 static void 241 il_generic_cmd_callback(struct il_priv *il, struct il_device_cmd *cmd, 242 struct il_rx_pkt *pkt) 243 { 244 if (pkt->hdr.flags & IL_CMD_FAILED_MSK) { 245 IL_ERR("Bad return from %s (0x%08X)\n", 246 il_get_cmd_string(cmd->hdr.cmd), pkt->hdr.flags); 247 return; 248 } 249 #ifdef CONFIG_IWLEGACY_DEBUG 250 switch (cmd->hdr.cmd) { 251 case C_TX_LINK_QUALITY_CMD: 252 case C_SENSITIVITY: 253 D_HC_DUMP("back from %s (0x%08X)\n", 254 il_get_cmd_string(cmd->hdr.cmd), pkt->hdr.flags); 255 break; 256 default: 257 D_HC("back from %s (0x%08X)\n", il_get_cmd_string(cmd->hdr.cmd), 258 pkt->hdr.flags); 259 } 260 #endif 261 } 262 263 static int 264 il_send_cmd_async(struct il_priv *il, struct il_host_cmd *cmd) 265 { 266 int ret; 267 268 BUG_ON(!(cmd->flags & CMD_ASYNC)); 269 270 /* An asynchronous command can not expect an SKB to be set. */ 271 BUG_ON(cmd->flags & CMD_WANT_SKB); 272 273 /* Assign a generic callback if one is not provided */ 274 if (!cmd->callback) 275 cmd->callback = il_generic_cmd_callback; 276 277 if (test_bit(S_EXIT_PENDING, &il->status)) 278 return -EBUSY; 279 280 ret = il_enqueue_hcmd(il, cmd); 281 if (ret < 0) { 282 IL_ERR("Error sending %s: enqueue_hcmd failed: %d\n", 283 il_get_cmd_string(cmd->id), ret); 284 return ret; 285 } 286 return 0; 287 } 288 289 int 290 il_send_cmd_sync(struct il_priv *il, struct il_host_cmd *cmd) 291 { 292 int cmd_idx; 293 int ret; 294 295 lockdep_assert_held(&il->mutex); 296 297 BUG_ON(cmd->flags & CMD_ASYNC); 298 299 /* A synchronous command can not have a callback set. */ 300 BUG_ON(cmd->callback); 301 302 D_INFO("Attempting to send sync command %s\n", 303 il_get_cmd_string(cmd->id)); 304 305 set_bit(S_HCMD_ACTIVE, &il->status); 306 D_INFO("Setting HCMD_ACTIVE for command %s\n", 307 il_get_cmd_string(cmd->id)); 308 309 cmd_idx = il_enqueue_hcmd(il, cmd); 310 if (cmd_idx < 0) { 311 ret = cmd_idx; 312 IL_ERR("Error sending %s: enqueue_hcmd failed: %d\n", 313 il_get_cmd_string(cmd->id), ret); 314 goto out; 315 } 316 317 ret = wait_event_timeout(il->wait_command_queue, 318 !test_bit(S_HCMD_ACTIVE, &il->status), 319 HOST_COMPLETE_TIMEOUT); 320 if (!ret) { 321 if (test_bit(S_HCMD_ACTIVE, &il->status)) { 322 IL_ERR("Error sending %s: time out after %dms.\n", 323 il_get_cmd_string(cmd->id), 324 jiffies_to_msecs(HOST_COMPLETE_TIMEOUT)); 325 326 clear_bit(S_HCMD_ACTIVE, &il->status); 327 D_INFO("Clearing HCMD_ACTIVE for command %s\n", 328 il_get_cmd_string(cmd->id)); 329 ret = -ETIMEDOUT; 330 goto cancel; 331 } 332 } 333 334 if (test_bit(S_RFKILL, &il->status)) { 335 IL_ERR("Command %s aborted: RF KILL Switch\n", 336 il_get_cmd_string(cmd->id)); 337 ret = -ECANCELED; 338 goto fail; 339 } 340 if (test_bit(S_FW_ERROR, &il->status)) { 341 IL_ERR("Command %s failed: FW Error\n", 342 il_get_cmd_string(cmd->id)); 343 ret = -EIO; 344 goto fail; 345 } 346 if ((cmd->flags & CMD_WANT_SKB) && !cmd->reply_page) { 347 IL_ERR("Error: Response NULL in '%s'\n", 348 il_get_cmd_string(cmd->id)); 349 ret = -EIO; 350 goto cancel; 351 } 352 353 ret = 0; 354 goto out; 355 356 cancel: 357 if (cmd->flags & CMD_WANT_SKB) { 358 /* 359 * Cancel the CMD_WANT_SKB flag for the cmd in the 360 * TX cmd queue. Otherwise in case the cmd comes 361 * in later, it will possibly set an invalid 362 * address (cmd->meta.source). 363 */ 364 il->txq[il->cmd_queue].meta[cmd_idx].flags &= ~CMD_WANT_SKB; 365 } 366 fail: 367 if (cmd->reply_page) { 368 il_free_pages(il, cmd->reply_page); 369 cmd->reply_page = 0; 370 } 371 out: 372 return ret; 373 } 374 EXPORT_SYMBOL(il_send_cmd_sync); 375 376 int 377 il_send_cmd(struct il_priv *il, struct il_host_cmd *cmd) 378 { 379 if (cmd->flags & CMD_ASYNC) 380 return il_send_cmd_async(il, cmd); 381 382 return il_send_cmd_sync(il, cmd); 383 } 384 EXPORT_SYMBOL(il_send_cmd); 385 386 int 387 il_send_cmd_pdu(struct il_priv *il, u8 id, u16 len, const void *data) 388 { 389 struct il_host_cmd cmd = { 390 .id = id, 391 .len = len, 392 .data = data, 393 }; 394 395 return il_send_cmd_sync(il, &cmd); 396 } 397 EXPORT_SYMBOL(il_send_cmd_pdu); 398 399 int 400 il_send_cmd_pdu_async(struct il_priv *il, u8 id, u16 len, const void *data, 401 void (*callback) (struct il_priv *il, 402 struct il_device_cmd *cmd, 403 struct il_rx_pkt *pkt)) 404 { 405 struct il_host_cmd cmd = { 406 .id = id, 407 .len = len, 408 .data = data, 409 }; 410 411 cmd.flags |= CMD_ASYNC; 412 cmd.callback = callback; 413 414 return il_send_cmd_async(il, &cmd); 415 } 416 EXPORT_SYMBOL(il_send_cmd_pdu_async); 417 418 /* default: IL_LED_BLINK(0) using blinking idx table */ 419 static int led_mode; 420 module_param(led_mode, int, 0444); 421 MODULE_PARM_DESC(led_mode, 422 "0=system default, " "1=On(RF On)/Off(RF Off), 2=blinking"); 423 424 /* Throughput OFF time(ms) ON time (ms) 425 * >300 25 25 426 * >200 to 300 40 40 427 * >100 to 200 55 55 428 * >70 to 100 65 65 429 * >50 to 70 75 75 430 * >20 to 50 85 85 431 * >10 to 20 95 95 432 * >5 to 10 110 110 433 * >1 to 5 130 130 434 * >0 to 1 167 167 435 * <=0 SOLID ON 436 */ 437 static const struct ieee80211_tpt_blink il_blink[] = { 438 {.throughput = 0, .blink_time = 334}, 439 {.throughput = 1 * 1024 - 1, .blink_time = 260}, 440 {.throughput = 5 * 1024 - 1, .blink_time = 220}, 441 {.throughput = 10 * 1024 - 1, .blink_time = 190}, 442 {.throughput = 20 * 1024 - 1, .blink_time = 170}, 443 {.throughput = 50 * 1024 - 1, .blink_time = 150}, 444 {.throughput = 70 * 1024 - 1, .blink_time = 130}, 445 {.throughput = 100 * 1024 - 1, .blink_time = 110}, 446 {.throughput = 200 * 1024 - 1, .blink_time = 80}, 447 {.throughput = 300 * 1024 - 1, .blink_time = 50}, 448 }; 449 450 /* 451 * Adjust led blink rate to compensate on a MAC Clock difference on every HW 452 * Led blink rate analysis showed an average deviation of 0% on 3945, 453 * 5% on 4965 HW. 454 * Need to compensate on the led on/off time per HW according to the deviation 455 * to achieve the desired led frequency 456 * The calculation is: (100-averageDeviation)/100 * blinkTime 457 * For code efficiency the calculation will be: 458 * compensation = (100 - averageDeviation) * 64 / 100 459 * NewBlinkTime = (compensation * BlinkTime) / 64 460 */ 461 static inline u8 462 il_blink_compensation(struct il_priv *il, u8 time, u16 compensation) 463 { 464 if (!compensation) { 465 IL_ERR("undefined blink compensation: " 466 "use pre-defined blinking time\n"); 467 return time; 468 } 469 470 return (u8) ((time * compensation) >> 6); 471 } 472 473 /* Set led pattern command */ 474 static int 475 il_led_cmd(struct il_priv *il, unsigned long on, unsigned long off) 476 { 477 struct il_led_cmd led_cmd = { 478 .id = IL_LED_LINK, 479 .interval = IL_DEF_LED_INTRVL 480 }; 481 int ret; 482 483 if (!test_bit(S_READY, &il->status)) 484 return -EBUSY; 485 486 if (il->blink_on == on && il->blink_off == off) 487 return 0; 488 489 if (off == 0) { 490 /* led is SOLID_ON */ 491 on = IL_LED_SOLID; 492 } 493 494 D_LED("Led blink time compensation=%u\n", 495 il->cfg->led_compensation); 496 led_cmd.on = 497 il_blink_compensation(il, on, 498 il->cfg->led_compensation); 499 led_cmd.off = 500 il_blink_compensation(il, off, 501 il->cfg->led_compensation); 502 503 ret = il->ops->send_led_cmd(il, &led_cmd); 504 if (!ret) { 505 il->blink_on = on; 506 il->blink_off = off; 507 } 508 return ret; 509 } 510 511 static void 512 il_led_brightness_set(struct led_classdev *led_cdev, 513 enum led_brightness brightness) 514 { 515 struct il_priv *il = container_of(led_cdev, struct il_priv, led); 516 unsigned long on = 0; 517 518 if (brightness > 0) 519 on = IL_LED_SOLID; 520 521 il_led_cmd(il, on, 0); 522 } 523 524 static int 525 il_led_blink_set(struct led_classdev *led_cdev, unsigned long *delay_on, 526 unsigned long *delay_off) 527 { 528 struct il_priv *il = container_of(led_cdev, struct il_priv, led); 529 530 return il_led_cmd(il, *delay_on, *delay_off); 531 } 532 533 void 534 il_leds_init(struct il_priv *il) 535 { 536 int mode = led_mode; 537 int ret; 538 539 if (mode == IL_LED_DEFAULT) 540 mode = il->cfg->led_mode; 541 542 il->led.name = 543 kasprintf(GFP_KERNEL, "%s-led", wiphy_name(il->hw->wiphy)); 544 if (!il->led.name) 545 return; 546 547 il->led.brightness_set = il_led_brightness_set; 548 il->led.blink_set = il_led_blink_set; 549 il->led.max_brightness = 1; 550 551 switch (mode) { 552 case IL_LED_DEFAULT: 553 WARN_ON(1); 554 break; 555 case IL_LED_BLINK: 556 il->led.default_trigger = 557 ieee80211_create_tpt_led_trigger(il->hw, 558 IEEE80211_TPT_LEDTRIG_FL_CONNECTED, 559 il_blink, 560 ARRAY_SIZE(il_blink)); 561 break; 562 case IL_LED_RF_STATE: 563 il->led.default_trigger = ieee80211_get_radio_led_name(il->hw); 564 break; 565 } 566 567 ret = led_classdev_register(&il->pci_dev->dev, &il->led); 568 if (ret) { 569 kfree(il->led.name); 570 return; 571 } 572 573 il->led_registered = true; 574 } 575 EXPORT_SYMBOL(il_leds_init); 576 577 void 578 il_leds_exit(struct il_priv *il) 579 { 580 if (!il->led_registered) 581 return; 582 583 led_classdev_unregister(&il->led); 584 kfree(il->led.name); 585 } 586 EXPORT_SYMBOL(il_leds_exit); 587 588 /************************** EEPROM BANDS **************************** 589 * 590 * The il_eeprom_band definitions below provide the mapping from the 591 * EEPROM contents to the specific channel number supported for each 592 * band. 593 * 594 * For example, il_priv->eeprom.band_3_channels[4] from the band_3 595 * definition below maps to physical channel 42 in the 5.2GHz spectrum. 596 * The specific geography and calibration information for that channel 597 * is contained in the eeprom map itself. 598 * 599 * During init, we copy the eeprom information and channel map 600 * information into il->channel_info_24/52 and il->channel_map_24/52 601 * 602 * channel_map_24/52 provides the idx in the channel_info array for a 603 * given channel. We have to have two separate maps as there is channel 604 * overlap with the 2.4GHz and 5.2GHz spectrum as seen in band_1 and 605 * band_2 606 * 607 * A value of 0xff stored in the channel_map indicates that the channel 608 * is not supported by the hardware at all. 609 * 610 * A value of 0xfe in the channel_map indicates that the channel is not 611 * valid for Tx with the current hardware. This means that 612 * while the system can tune and receive on a given channel, it may not 613 * be able to associate or transmit any frames on that 614 * channel. There is no corresponding channel information for that 615 * entry. 616 * 617 *********************************************************************/ 618 619 /* 2.4 GHz */ 620 const u8 il_eeprom_band_1[14] = { 621 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14 622 }; 623 624 /* 5.2 GHz bands */ 625 static const u8 il_eeprom_band_2[] = { /* 4915-5080MHz */ 626 183, 184, 185, 187, 188, 189, 192, 196, 7, 8, 11, 12, 16 627 }; 628 629 static const u8 il_eeprom_band_3[] = { /* 5170-5320MHz */ 630 34, 36, 38, 40, 42, 44, 46, 48, 52, 56, 60, 64 631 }; 632 633 static const u8 il_eeprom_band_4[] = { /* 5500-5700MHz */ 634 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140 635 }; 636 637 static const u8 il_eeprom_band_5[] = { /* 5725-5825MHz */ 638 145, 149, 153, 157, 161, 165 639 }; 640 641 static const u8 il_eeprom_band_6[] = { /* 2.4 ht40 channel */ 642 1, 2, 3, 4, 5, 6, 7 643 }; 644 645 static const u8 il_eeprom_band_7[] = { /* 5.2 ht40 channel */ 646 36, 44, 52, 60, 100, 108, 116, 124, 132, 149, 157 647 }; 648 649 /****************************************************************************** 650 * 651 * EEPROM related functions 652 * 653 ******************************************************************************/ 654 655 static int 656 il_eeprom_verify_signature(struct il_priv *il) 657 { 658 u32 gp = _il_rd(il, CSR_EEPROM_GP) & CSR_EEPROM_GP_VALID_MSK; 659 int ret = 0; 660 661 D_EEPROM("EEPROM signature=0x%08x\n", gp); 662 switch (gp) { 663 case CSR_EEPROM_GP_GOOD_SIG_EEP_LESS_THAN_4K: 664 case CSR_EEPROM_GP_GOOD_SIG_EEP_MORE_THAN_4K: 665 break; 666 default: 667 IL_ERR("bad EEPROM signature," "EEPROM_GP=0x%08x\n", gp); 668 ret = -ENOENT; 669 break; 670 } 671 return ret; 672 } 673 674 const u8 * 675 il_eeprom_query_addr(const struct il_priv *il, size_t offset) 676 { 677 BUG_ON(offset >= il->cfg->eeprom_size); 678 return &il->eeprom[offset]; 679 } 680 EXPORT_SYMBOL(il_eeprom_query_addr); 681 682 u16 683 il_eeprom_query16(const struct il_priv *il, size_t offset) 684 { 685 if (!il->eeprom) 686 return 0; 687 return (u16) il->eeprom[offset] | ((u16) il->eeprom[offset + 1] << 8); 688 } 689 EXPORT_SYMBOL(il_eeprom_query16); 690 691 /* 692 * il_eeprom_init - read EEPROM contents 693 * 694 * Load the EEPROM contents from adapter into il->eeprom 695 * 696 * NOTE: This routine uses the non-debug IO access functions. 697 */ 698 int 699 il_eeprom_init(struct il_priv *il) 700 { 701 __le16 *e; 702 u32 gp = _il_rd(il, CSR_EEPROM_GP); 703 int sz; 704 int ret; 705 int addr; 706 707 /* allocate eeprom */ 708 sz = il->cfg->eeprom_size; 709 D_EEPROM("NVM size = %d\n", sz); 710 il->eeprom = kzalloc(sz, GFP_KERNEL); 711 if (!il->eeprom) 712 return -ENOMEM; 713 714 e = (__le16 *) il->eeprom; 715 716 il->ops->apm_init(il); 717 718 ret = il_eeprom_verify_signature(il); 719 if (ret < 0) { 720 IL_ERR("EEPROM not found, EEPROM_GP=0x%08x\n", gp); 721 ret = -ENOENT; 722 goto err; 723 } 724 725 /* Make sure driver (instead of uCode) is allowed to read EEPROM */ 726 ret = il->ops->eeprom_acquire_semaphore(il); 727 if (ret < 0) { 728 IL_ERR("Failed to acquire EEPROM semaphore.\n"); 729 ret = -ENOENT; 730 goto err; 731 } 732 733 /* eeprom is an array of 16bit values */ 734 for (addr = 0; addr < sz; addr += sizeof(u16)) { 735 u32 r; 736 737 _il_wr(il, CSR_EEPROM_REG, 738 CSR_EEPROM_REG_MSK_ADDR & (addr << 1)); 739 740 ret = 741 _il_poll_bit(il, CSR_EEPROM_REG, 742 CSR_EEPROM_REG_READ_VALID_MSK, 743 CSR_EEPROM_REG_READ_VALID_MSK, 744 IL_EEPROM_ACCESS_TIMEOUT); 745 if (ret < 0) { 746 IL_ERR("Time out reading EEPROM[%d]\n", addr); 747 goto done; 748 } 749 r = _il_rd(il, CSR_EEPROM_REG); 750 e[addr / 2] = cpu_to_le16(r >> 16); 751 } 752 753 D_EEPROM("NVM Type: %s, version: 0x%x\n", "EEPROM", 754 il_eeprom_query16(il, EEPROM_VERSION)); 755 756 ret = 0; 757 done: 758 il->ops->eeprom_release_semaphore(il); 759 760 err: 761 if (ret) 762 il_eeprom_free(il); 763 /* Reset chip to save power until we load uCode during "up". */ 764 il_apm_stop(il); 765 return ret; 766 } 767 EXPORT_SYMBOL(il_eeprom_init); 768 769 void 770 il_eeprom_free(struct il_priv *il) 771 { 772 kfree(il->eeprom); 773 il->eeprom = NULL; 774 } 775 EXPORT_SYMBOL(il_eeprom_free); 776 777 static void 778 il_init_band_reference(const struct il_priv *il, int eep_band, 779 int *eeprom_ch_count, 780 const struct il_eeprom_channel **eeprom_ch_info, 781 const u8 **eeprom_ch_idx) 782 { 783 u32 offset = il->cfg->regulatory_bands[eep_band - 1]; 784 785 switch (eep_band) { 786 case 1: /* 2.4GHz band */ 787 *eeprom_ch_count = ARRAY_SIZE(il_eeprom_band_1); 788 *eeprom_ch_info = 789 (struct il_eeprom_channel *)il_eeprom_query_addr(il, 790 offset); 791 *eeprom_ch_idx = il_eeprom_band_1; 792 break; 793 case 2: /* 4.9GHz band */ 794 *eeprom_ch_count = ARRAY_SIZE(il_eeprom_band_2); 795 *eeprom_ch_info = 796 (struct il_eeprom_channel *)il_eeprom_query_addr(il, 797 offset); 798 *eeprom_ch_idx = il_eeprom_band_2; 799 break; 800 case 3: /* 5.2GHz band */ 801 *eeprom_ch_count = ARRAY_SIZE(il_eeprom_band_3); 802 *eeprom_ch_info = 803 (struct il_eeprom_channel *)il_eeprom_query_addr(il, 804 offset); 805 *eeprom_ch_idx = il_eeprom_band_3; 806 break; 807 case 4: /* 5.5GHz band */ 808 *eeprom_ch_count = ARRAY_SIZE(il_eeprom_band_4); 809 *eeprom_ch_info = 810 (struct il_eeprom_channel *)il_eeprom_query_addr(il, 811 offset); 812 *eeprom_ch_idx = il_eeprom_band_4; 813 break; 814 case 5: /* 5.7GHz band */ 815 *eeprom_ch_count = ARRAY_SIZE(il_eeprom_band_5); 816 *eeprom_ch_info = 817 (struct il_eeprom_channel *)il_eeprom_query_addr(il, 818 offset); 819 *eeprom_ch_idx = il_eeprom_band_5; 820 break; 821 case 6: /* 2.4GHz ht40 channels */ 822 *eeprom_ch_count = ARRAY_SIZE(il_eeprom_band_6); 823 *eeprom_ch_info = 824 (struct il_eeprom_channel *)il_eeprom_query_addr(il, 825 offset); 826 *eeprom_ch_idx = il_eeprom_band_6; 827 break; 828 case 7: /* 5 GHz ht40 channels */ 829 *eeprom_ch_count = ARRAY_SIZE(il_eeprom_band_7); 830 *eeprom_ch_info = 831 (struct il_eeprom_channel *)il_eeprom_query_addr(il, 832 offset); 833 *eeprom_ch_idx = il_eeprom_band_7; 834 break; 835 default: 836 BUG(); 837 } 838 } 839 840 #define CHECK_AND_PRINT(x) ((eeprom_ch->flags & EEPROM_CHANNEL_##x) \ 841 ? # x " " : "") 842 /* 843 * il_mod_ht40_chan_info - Copy ht40 channel info into driver's il. 844 * 845 * Does not set up a command, or touch hardware. 846 */ 847 static int 848 il_mod_ht40_chan_info(struct il_priv *il, enum nl80211_band band, u16 channel, 849 const struct il_eeprom_channel *eeprom_ch, 850 u8 clear_ht40_extension_channel) 851 { 852 struct il_channel_info *ch_info; 853 854 ch_info = 855 (struct il_channel_info *)il_get_channel_info(il, band, channel); 856 857 if (!il_is_channel_valid(ch_info)) 858 return -1; 859 860 D_EEPROM("HT40 Ch. %d [%sGHz] %s%s%s%s%s(0x%02x %ddBm):" 861 " Ad-Hoc %ssupported\n", ch_info->channel, 862 il_is_channel_a_band(ch_info) ? "5.2" : "2.4", 863 CHECK_AND_PRINT(IBSS), CHECK_AND_PRINT(ACTIVE), 864 CHECK_AND_PRINT(RADAR), CHECK_AND_PRINT(WIDE), 865 CHECK_AND_PRINT(DFS), eeprom_ch->flags, 866 eeprom_ch->max_power_avg, 867 ((eeprom_ch->flags & EEPROM_CHANNEL_IBSS) && 868 !(eeprom_ch->flags & EEPROM_CHANNEL_RADAR)) ? "" : "not "); 869 870 ch_info->ht40_eeprom = *eeprom_ch; 871 ch_info->ht40_max_power_avg = eeprom_ch->max_power_avg; 872 ch_info->ht40_flags = eeprom_ch->flags; 873 if (eeprom_ch->flags & EEPROM_CHANNEL_VALID) 874 ch_info->ht40_extension_channel &= 875 ~clear_ht40_extension_channel; 876 877 return 0; 878 } 879 880 #define CHECK_AND_PRINT_I(x) ((eeprom_ch_info[ch].flags & EEPROM_CHANNEL_##x) \ 881 ? # x " " : "") 882 883 /* 884 * il_init_channel_map - Set up driver's info for all possible channels 885 */ 886 int 887 il_init_channel_map(struct il_priv *il) 888 { 889 int eeprom_ch_count = 0; 890 const u8 *eeprom_ch_idx = NULL; 891 const struct il_eeprom_channel *eeprom_ch_info = NULL; 892 int band, ch; 893 struct il_channel_info *ch_info; 894 895 if (il->channel_count) { 896 D_EEPROM("Channel map already initialized.\n"); 897 return 0; 898 } 899 900 D_EEPROM("Initializing regulatory info from EEPROM\n"); 901 902 il->channel_count = 903 ARRAY_SIZE(il_eeprom_band_1) + ARRAY_SIZE(il_eeprom_band_2) + 904 ARRAY_SIZE(il_eeprom_band_3) + ARRAY_SIZE(il_eeprom_band_4) + 905 ARRAY_SIZE(il_eeprom_band_5); 906 907 D_EEPROM("Parsing data for %d channels.\n", il->channel_count); 908 909 il->channel_info = 910 kcalloc(il->channel_count, sizeof(struct il_channel_info), 911 GFP_KERNEL); 912 if (!il->channel_info) { 913 IL_ERR("Could not allocate channel_info\n"); 914 il->channel_count = 0; 915 return -ENOMEM; 916 } 917 918 ch_info = il->channel_info; 919 920 /* Loop through the 5 EEPROM bands adding them in order to the 921 * channel map we maintain (that contains additional information than 922 * what just in the EEPROM) */ 923 for (band = 1; band <= 5; band++) { 924 925 il_init_band_reference(il, band, &eeprom_ch_count, 926 &eeprom_ch_info, &eeprom_ch_idx); 927 928 /* Loop through each band adding each of the channels */ 929 for (ch = 0; ch < eeprom_ch_count; ch++) { 930 ch_info->channel = eeprom_ch_idx[ch]; 931 ch_info->band = 932 (band == 933 1) ? NL80211_BAND_2GHZ : NL80211_BAND_5GHZ; 934 935 /* permanently store EEPROM's channel regulatory flags 936 * and max power in channel info database. */ 937 ch_info->eeprom = eeprom_ch_info[ch]; 938 939 /* Copy the run-time flags so they are there even on 940 * invalid channels */ 941 ch_info->flags = eeprom_ch_info[ch].flags; 942 /* First write that ht40 is not enabled, and then enable 943 * one by one */ 944 ch_info->ht40_extension_channel = 945 IEEE80211_CHAN_NO_HT40; 946 947 if (!(il_is_channel_valid(ch_info))) { 948 D_EEPROM("Ch. %d Flags %x [%sGHz] - " 949 "No traffic\n", ch_info->channel, 950 ch_info->flags, 951 il_is_channel_a_band(ch_info) ? "5.2" : 952 "2.4"); 953 ch_info++; 954 continue; 955 } 956 957 /* Initialize regulatory-based run-time data */ 958 ch_info->max_power_avg = ch_info->curr_txpow = 959 eeprom_ch_info[ch].max_power_avg; 960 ch_info->scan_power = eeprom_ch_info[ch].max_power_avg; 961 ch_info->min_power = 0; 962 963 D_EEPROM("Ch. %d [%sGHz] " "%s%s%s%s%s%s(0x%02x %ddBm):" 964 " Ad-Hoc %ssupported\n", ch_info->channel, 965 il_is_channel_a_band(ch_info) ? "5.2" : "2.4", 966 CHECK_AND_PRINT_I(VALID), 967 CHECK_AND_PRINT_I(IBSS), 968 CHECK_AND_PRINT_I(ACTIVE), 969 CHECK_AND_PRINT_I(RADAR), 970 CHECK_AND_PRINT_I(WIDE), 971 CHECK_AND_PRINT_I(DFS), 972 eeprom_ch_info[ch].flags, 973 eeprom_ch_info[ch].max_power_avg, 974 ((eeprom_ch_info[ch]. 975 flags & EEPROM_CHANNEL_IBSS) && 976 !(eeprom_ch_info[ch]. 977 flags & EEPROM_CHANNEL_RADAR)) ? "" : 978 "not "); 979 980 ch_info++; 981 } 982 } 983 984 /* Check if we do have HT40 channels */ 985 if (il->cfg->regulatory_bands[5] == EEPROM_REGULATORY_BAND_NO_HT40 && 986 il->cfg->regulatory_bands[6] == EEPROM_REGULATORY_BAND_NO_HT40) 987 return 0; 988 989 /* Two additional EEPROM bands for 2.4 and 5 GHz HT40 channels */ 990 for (band = 6; band <= 7; band++) { 991 enum nl80211_band ieeeband; 992 993 il_init_band_reference(il, band, &eeprom_ch_count, 994 &eeprom_ch_info, &eeprom_ch_idx); 995 996 /* EEPROM band 6 is 2.4, band 7 is 5 GHz */ 997 ieeeband = 998 (band == 6) ? NL80211_BAND_2GHZ : NL80211_BAND_5GHZ; 999 1000 /* Loop through each band adding each of the channels */ 1001 for (ch = 0; ch < eeprom_ch_count; ch++) { 1002 /* Set up driver's info for lower half */ 1003 il_mod_ht40_chan_info(il, ieeeband, eeprom_ch_idx[ch], 1004 &eeprom_ch_info[ch], 1005 IEEE80211_CHAN_NO_HT40PLUS); 1006 1007 /* Set up driver's info for upper half */ 1008 il_mod_ht40_chan_info(il, ieeeband, 1009 eeprom_ch_idx[ch] + 4, 1010 &eeprom_ch_info[ch], 1011 IEEE80211_CHAN_NO_HT40MINUS); 1012 } 1013 } 1014 1015 return 0; 1016 } 1017 EXPORT_SYMBOL(il_init_channel_map); 1018 1019 /* 1020 * il_free_channel_map - undo allocations in il_init_channel_map 1021 */ 1022 void 1023 il_free_channel_map(struct il_priv *il) 1024 { 1025 kfree(il->channel_info); 1026 il->channel_count = 0; 1027 } 1028 EXPORT_SYMBOL(il_free_channel_map); 1029 1030 /* 1031 * il_get_channel_info - Find driver's ilate channel info 1032 * 1033 * Based on band and channel number. 1034 */ 1035 const struct il_channel_info * 1036 il_get_channel_info(const struct il_priv *il, enum nl80211_band band, 1037 u16 channel) 1038 { 1039 int i; 1040 1041 switch (band) { 1042 case NL80211_BAND_5GHZ: 1043 for (i = 14; i < il->channel_count; i++) { 1044 if (il->channel_info[i].channel == channel) 1045 return &il->channel_info[i]; 1046 } 1047 break; 1048 case NL80211_BAND_2GHZ: 1049 if (channel >= 1 && channel <= 14) 1050 return &il->channel_info[channel - 1]; 1051 break; 1052 default: 1053 BUG(); 1054 } 1055 1056 return NULL; 1057 } 1058 EXPORT_SYMBOL(il_get_channel_info); 1059 1060 /* 1061 * Setting power level allows the card to go to sleep when not busy. 1062 * 1063 * We calculate a sleep command based on the required latency, which 1064 * we get from mac80211. 1065 */ 1066 1067 #define SLP_VEC(X0, X1, X2, X3, X4) { \ 1068 cpu_to_le32(X0), \ 1069 cpu_to_le32(X1), \ 1070 cpu_to_le32(X2), \ 1071 cpu_to_le32(X3), \ 1072 cpu_to_le32(X4) \ 1073 } 1074 1075 static void 1076 il_build_powertable_cmd(struct il_priv *il, struct il_powertable_cmd *cmd) 1077 { 1078 static const __le32 interval[3][IL_POWER_VEC_SIZE] = { 1079 SLP_VEC(2, 2, 4, 6, 0xFF), 1080 SLP_VEC(2, 4, 7, 10, 10), 1081 SLP_VEC(4, 7, 10, 10, 0xFF) 1082 }; 1083 int i, dtim_period, no_dtim; 1084 u32 max_sleep; 1085 bool skip; 1086 1087 memset(cmd, 0, sizeof(*cmd)); 1088 1089 if (il->power_data.pci_pm) 1090 cmd->flags |= IL_POWER_PCI_PM_MSK; 1091 1092 /* if no Power Save, we are done */ 1093 if (il->power_data.ps_disabled) 1094 return; 1095 1096 cmd->flags = IL_POWER_DRIVER_ALLOW_SLEEP_MSK; 1097 cmd->keep_alive_seconds = 0; 1098 cmd->debug_flags = 0; 1099 cmd->rx_data_timeout = cpu_to_le32(25 * 1024); 1100 cmd->tx_data_timeout = cpu_to_le32(25 * 1024); 1101 cmd->keep_alive_beacons = 0; 1102 1103 dtim_period = il->vif ? il->vif->bss_conf.dtim_period : 0; 1104 1105 if (dtim_period <= 2) { 1106 memcpy(cmd->sleep_interval, interval[0], sizeof(interval[0])); 1107 no_dtim = 2; 1108 } else if (dtim_period <= 10) { 1109 memcpy(cmd->sleep_interval, interval[1], sizeof(interval[1])); 1110 no_dtim = 2; 1111 } else { 1112 memcpy(cmd->sleep_interval, interval[2], sizeof(interval[2])); 1113 no_dtim = 0; 1114 } 1115 1116 if (dtim_period == 0) { 1117 dtim_period = 1; 1118 skip = false; 1119 } else { 1120 skip = !!no_dtim; 1121 } 1122 1123 if (skip) { 1124 __le32 tmp = cmd->sleep_interval[IL_POWER_VEC_SIZE - 1]; 1125 1126 max_sleep = le32_to_cpu(tmp); 1127 if (max_sleep == 0xFF) 1128 max_sleep = dtim_period * (skip + 1); 1129 else if (max_sleep > dtim_period) 1130 max_sleep = (max_sleep / dtim_period) * dtim_period; 1131 cmd->flags |= IL_POWER_SLEEP_OVER_DTIM_MSK; 1132 } else { 1133 max_sleep = dtim_period; 1134 cmd->flags &= ~IL_POWER_SLEEP_OVER_DTIM_MSK; 1135 } 1136 1137 for (i = 0; i < IL_POWER_VEC_SIZE; i++) 1138 if (le32_to_cpu(cmd->sleep_interval[i]) > max_sleep) 1139 cmd->sleep_interval[i] = cpu_to_le32(max_sleep); 1140 } 1141 1142 static int 1143 il_set_power(struct il_priv *il, struct il_powertable_cmd *cmd) 1144 { 1145 D_POWER("Sending power/sleep command\n"); 1146 D_POWER("Flags value = 0x%08X\n", cmd->flags); 1147 D_POWER("Tx timeout = %u\n", le32_to_cpu(cmd->tx_data_timeout)); 1148 D_POWER("Rx timeout = %u\n", le32_to_cpu(cmd->rx_data_timeout)); 1149 D_POWER("Sleep interval vector = { %d , %d , %d , %d , %d }\n", 1150 le32_to_cpu(cmd->sleep_interval[0]), 1151 le32_to_cpu(cmd->sleep_interval[1]), 1152 le32_to_cpu(cmd->sleep_interval[2]), 1153 le32_to_cpu(cmd->sleep_interval[3]), 1154 le32_to_cpu(cmd->sleep_interval[4])); 1155 1156 return il_send_cmd_pdu(il, C_POWER_TBL, 1157 sizeof(struct il_powertable_cmd), cmd); 1158 } 1159 1160 static int 1161 il_power_set_mode(struct il_priv *il, struct il_powertable_cmd *cmd, bool force) 1162 { 1163 int ret; 1164 bool update_chains; 1165 1166 lockdep_assert_held(&il->mutex); 1167 1168 /* Don't update the RX chain when chain noise calibration is running */ 1169 update_chains = il->chain_noise_data.state == IL_CHAIN_NOISE_DONE || 1170 il->chain_noise_data.state == IL_CHAIN_NOISE_ALIVE; 1171 1172 if (!memcmp(&il->power_data.sleep_cmd, cmd, sizeof(*cmd)) && !force) 1173 return 0; 1174 1175 if (!il_is_ready_rf(il)) 1176 return -EIO; 1177 1178 /* scan complete use sleep_power_next, need to be updated */ 1179 memcpy(&il->power_data.sleep_cmd_next, cmd, sizeof(*cmd)); 1180 if (test_bit(S_SCANNING, &il->status) && !force) { 1181 D_INFO("Defer power set mode while scanning\n"); 1182 return 0; 1183 } 1184 1185 if (cmd->flags & IL_POWER_DRIVER_ALLOW_SLEEP_MSK) 1186 set_bit(S_POWER_PMI, &il->status); 1187 1188 ret = il_set_power(il, cmd); 1189 if (!ret) { 1190 if (!(cmd->flags & IL_POWER_DRIVER_ALLOW_SLEEP_MSK)) 1191 clear_bit(S_POWER_PMI, &il->status); 1192 1193 if (il->ops->update_chain_flags && update_chains) 1194 il->ops->update_chain_flags(il); 1195 else if (il->ops->update_chain_flags) 1196 D_POWER("Cannot update the power, chain noise " 1197 "calibration running: %d\n", 1198 il->chain_noise_data.state); 1199 1200 memcpy(&il->power_data.sleep_cmd, cmd, sizeof(*cmd)); 1201 } else 1202 IL_ERR("set power fail, ret = %d", ret); 1203 1204 return ret; 1205 } 1206 1207 int 1208 il_power_update_mode(struct il_priv *il, bool force) 1209 { 1210 struct il_powertable_cmd cmd; 1211 1212 il_build_powertable_cmd(il, &cmd); 1213 1214 return il_power_set_mode(il, &cmd, force); 1215 } 1216 EXPORT_SYMBOL(il_power_update_mode); 1217 1218 /* initialize to default */ 1219 void 1220 il_power_initialize(struct il_priv *il) 1221 { 1222 u16 lctl; 1223 1224 pcie_capability_read_word(il->pci_dev, PCI_EXP_LNKCTL, &lctl); 1225 il->power_data.pci_pm = !(lctl & PCI_EXP_LNKCTL_ASPM_L0S); 1226 1227 il->power_data.debug_sleep_level_override = -1; 1228 1229 memset(&il->power_data.sleep_cmd, 0, sizeof(il->power_data.sleep_cmd)); 1230 } 1231 EXPORT_SYMBOL(il_power_initialize); 1232 1233 /* For active scan, listen ACTIVE_DWELL_TIME (msec) on each channel after 1234 * sending probe req. This should be set long enough to hear probe responses 1235 * from more than one AP. */ 1236 #define IL_ACTIVE_DWELL_TIME_24 (30) /* all times in msec */ 1237 #define IL_ACTIVE_DWELL_TIME_52 (20) 1238 1239 #define IL_ACTIVE_DWELL_FACTOR_24GHZ (3) 1240 #define IL_ACTIVE_DWELL_FACTOR_52GHZ (2) 1241 1242 /* For passive scan, listen PASSIVE_DWELL_TIME (msec) on each channel. 1243 * Must be set longer than active dwell time. 1244 * For the most reliable scan, set > AP beacon interval (typically 100msec). */ 1245 #define IL_PASSIVE_DWELL_TIME_24 (20) /* all times in msec */ 1246 #define IL_PASSIVE_DWELL_TIME_52 (10) 1247 #define IL_PASSIVE_DWELL_BASE (100) 1248 #define IL_CHANNEL_TUNE_TIME 5 1249 1250 static int 1251 il_send_scan_abort(struct il_priv *il) 1252 { 1253 int ret; 1254 struct il_rx_pkt *pkt; 1255 struct il_host_cmd cmd = { 1256 .id = C_SCAN_ABORT, 1257 .flags = CMD_WANT_SKB, 1258 }; 1259 1260 /* Exit instantly with error when device is not ready 1261 * to receive scan abort command or it does not perform 1262 * hardware scan currently */ 1263 if (!test_bit(S_READY, &il->status) || 1264 !test_bit(S_GEO_CONFIGURED, &il->status) || 1265 !test_bit(S_SCAN_HW, &il->status) || 1266 test_bit(S_FW_ERROR, &il->status) || 1267 test_bit(S_EXIT_PENDING, &il->status)) 1268 return -EIO; 1269 1270 ret = il_send_cmd_sync(il, &cmd); 1271 if (ret) 1272 return ret; 1273 1274 pkt = (struct il_rx_pkt *)cmd.reply_page; 1275 if (pkt->u.status != CAN_ABORT_STATUS) { 1276 /* The scan abort will return 1 for success or 1277 * 2 for "failure". A failure condition can be 1278 * due to simply not being in an active scan which 1279 * can occur if we send the scan abort before we 1280 * the microcode has notified us that a scan is 1281 * completed. */ 1282 D_SCAN("SCAN_ABORT ret %d.\n", pkt->u.status); 1283 ret = -EIO; 1284 } 1285 1286 il_free_pages(il, cmd.reply_page); 1287 return ret; 1288 } 1289 1290 static void 1291 il_complete_scan(struct il_priv *il, bool aborted) 1292 { 1293 struct cfg80211_scan_info info = { 1294 .aborted = aborted, 1295 }; 1296 1297 /* check if scan was requested from mac80211 */ 1298 if (il->scan_request) { 1299 D_SCAN("Complete scan in mac80211\n"); 1300 ieee80211_scan_completed(il->hw, &info); 1301 } 1302 1303 il->scan_vif = NULL; 1304 il->scan_request = NULL; 1305 } 1306 1307 void 1308 il_force_scan_end(struct il_priv *il) 1309 { 1310 lockdep_assert_held(&il->mutex); 1311 1312 if (!test_bit(S_SCANNING, &il->status)) { 1313 D_SCAN("Forcing scan end while not scanning\n"); 1314 return; 1315 } 1316 1317 D_SCAN("Forcing scan end\n"); 1318 clear_bit(S_SCANNING, &il->status); 1319 clear_bit(S_SCAN_HW, &il->status); 1320 clear_bit(S_SCAN_ABORTING, &il->status); 1321 il_complete_scan(il, true); 1322 } 1323 1324 static void 1325 il_do_scan_abort(struct il_priv *il) 1326 { 1327 int ret; 1328 1329 lockdep_assert_held(&il->mutex); 1330 1331 if (!test_bit(S_SCANNING, &il->status)) { 1332 D_SCAN("Not performing scan to abort\n"); 1333 return; 1334 } 1335 1336 if (test_and_set_bit(S_SCAN_ABORTING, &il->status)) { 1337 D_SCAN("Scan abort in progress\n"); 1338 return; 1339 } 1340 1341 ret = il_send_scan_abort(il); 1342 if (ret) { 1343 D_SCAN("Send scan abort failed %d\n", ret); 1344 il_force_scan_end(il); 1345 } else 1346 D_SCAN("Successfully send scan abort\n"); 1347 } 1348 1349 /* 1350 * il_scan_cancel - Cancel any currently executing HW scan 1351 */ 1352 int 1353 il_scan_cancel(struct il_priv *il) 1354 { 1355 D_SCAN("Queuing abort scan\n"); 1356 queue_work(il->workqueue, &il->abort_scan); 1357 return 0; 1358 } 1359 EXPORT_SYMBOL(il_scan_cancel); 1360 1361 /* 1362 * il_scan_cancel_timeout - Cancel any currently executing HW scan 1363 * @ms: amount of time to wait (in milliseconds) for scan to abort 1364 * 1365 */ 1366 int 1367 il_scan_cancel_timeout(struct il_priv *il, unsigned long ms) 1368 { 1369 unsigned long timeout = jiffies + msecs_to_jiffies(ms); 1370 1371 lockdep_assert_held(&il->mutex); 1372 1373 D_SCAN("Scan cancel timeout\n"); 1374 1375 il_do_scan_abort(il); 1376 1377 while (time_before_eq(jiffies, timeout)) { 1378 if (!test_bit(S_SCAN_HW, &il->status)) 1379 break; 1380 msleep(20); 1381 } 1382 1383 return test_bit(S_SCAN_HW, &il->status); 1384 } 1385 EXPORT_SYMBOL(il_scan_cancel_timeout); 1386 1387 /* Service response to C_SCAN (0x80) */ 1388 static void 1389 il_hdl_scan(struct il_priv *il, struct il_rx_buf *rxb) 1390 { 1391 #ifdef CONFIG_IWLEGACY_DEBUG 1392 struct il_rx_pkt *pkt = rxb_addr(rxb); 1393 struct il_scanreq_notification *notif = 1394 (struct il_scanreq_notification *)pkt->u.raw; 1395 1396 D_SCAN("Scan request status = 0x%x\n", notif->status); 1397 #endif 1398 } 1399 1400 /* Service N_SCAN_START (0x82) */ 1401 static void 1402 il_hdl_scan_start(struct il_priv *il, struct il_rx_buf *rxb) 1403 { 1404 struct il_rx_pkt *pkt = rxb_addr(rxb); 1405 struct il_scanstart_notification *notif = 1406 (struct il_scanstart_notification *)pkt->u.raw; 1407 il->scan_start_tsf = le32_to_cpu(notif->tsf_low); 1408 D_SCAN("Scan start: " "%d [802.11%s] " 1409 "(TSF: 0x%08X:%08X) - %d (beacon timer %u)\n", notif->channel, 1410 notif->band ? "bg" : "a", le32_to_cpu(notif->tsf_high), 1411 le32_to_cpu(notif->tsf_low), notif->status, notif->beacon_timer); 1412 } 1413 1414 /* Service N_SCAN_RESULTS (0x83) */ 1415 static void 1416 il_hdl_scan_results(struct il_priv *il, struct il_rx_buf *rxb) 1417 { 1418 #ifdef CONFIG_IWLEGACY_DEBUG 1419 struct il_rx_pkt *pkt = rxb_addr(rxb); 1420 struct il_scanresults_notification *notif = 1421 (struct il_scanresults_notification *)pkt->u.raw; 1422 1423 D_SCAN("Scan ch.res: " "%d [802.11%s] " "(TSF: 0x%08X:%08X) - %d " 1424 "elapsed=%lu usec\n", notif->channel, notif->band ? "bg" : "a", 1425 le32_to_cpu(notif->tsf_high), le32_to_cpu(notif->tsf_low), 1426 le32_to_cpu(notif->stats[0]), 1427 le32_to_cpu(notif->tsf_low) - il->scan_start_tsf); 1428 #endif 1429 } 1430 1431 /* Service N_SCAN_COMPLETE (0x84) */ 1432 static void 1433 il_hdl_scan_complete(struct il_priv *il, struct il_rx_buf *rxb) 1434 { 1435 1436 struct il_rx_pkt *pkt = rxb_addr(rxb); 1437 struct il_scancomplete_notification *scan_notif = (void *)pkt->u.raw; 1438 1439 D_SCAN("Scan complete: %d channels (TSF 0x%08X:%08X) - %d\n", 1440 scan_notif->scanned_channels, scan_notif->tsf_low, 1441 scan_notif->tsf_high, scan_notif->status); 1442 1443 /* The HW is no longer scanning */ 1444 clear_bit(S_SCAN_HW, &il->status); 1445 1446 D_SCAN("Scan on %sGHz took %dms\n", 1447 (il->scan_band == NL80211_BAND_2GHZ) ? "2.4" : "5.2", 1448 jiffies_to_msecs(jiffies - il->scan_start)); 1449 1450 queue_work(il->workqueue, &il->scan_completed); 1451 } 1452 1453 void 1454 il_setup_rx_scan_handlers(struct il_priv *il) 1455 { 1456 /* scan handlers */ 1457 il->handlers[C_SCAN] = il_hdl_scan; 1458 il->handlers[N_SCAN_START] = il_hdl_scan_start; 1459 il->handlers[N_SCAN_RESULTS] = il_hdl_scan_results; 1460 il->handlers[N_SCAN_COMPLETE] = il_hdl_scan_complete; 1461 } 1462 EXPORT_SYMBOL(il_setup_rx_scan_handlers); 1463 1464 u16 1465 il_get_active_dwell_time(struct il_priv *il, enum nl80211_band band, 1466 u8 n_probes) 1467 { 1468 if (band == NL80211_BAND_5GHZ) 1469 return IL_ACTIVE_DWELL_TIME_52 + 1470 IL_ACTIVE_DWELL_FACTOR_52GHZ * (n_probes + 1); 1471 else 1472 return IL_ACTIVE_DWELL_TIME_24 + 1473 IL_ACTIVE_DWELL_FACTOR_24GHZ * (n_probes + 1); 1474 } 1475 EXPORT_SYMBOL(il_get_active_dwell_time); 1476 1477 u16 1478 il_get_passive_dwell_time(struct il_priv *il, enum nl80211_band band, 1479 struct ieee80211_vif *vif) 1480 { 1481 u16 value; 1482 1483 u16 passive = 1484 (band == 1485 NL80211_BAND_2GHZ) ? IL_PASSIVE_DWELL_BASE + 1486 IL_PASSIVE_DWELL_TIME_24 : IL_PASSIVE_DWELL_BASE + 1487 IL_PASSIVE_DWELL_TIME_52; 1488 1489 if (il_is_any_associated(il)) { 1490 /* 1491 * If we're associated, we clamp the maximum passive 1492 * dwell time to be 98% of the smallest beacon interval 1493 * (minus 2 * channel tune time) 1494 */ 1495 value = il->vif ? il->vif->bss_conf.beacon_int : 0; 1496 if (value > IL_PASSIVE_DWELL_BASE || !value) 1497 value = IL_PASSIVE_DWELL_BASE; 1498 value = (value * 98) / 100 - IL_CHANNEL_TUNE_TIME * 2; 1499 passive = min(value, passive); 1500 } 1501 1502 return passive; 1503 } 1504 EXPORT_SYMBOL(il_get_passive_dwell_time); 1505 1506 void 1507 il_init_scan_params(struct il_priv *il) 1508 { 1509 u8 ant_idx = fls(il->hw_params.valid_tx_ant) - 1; 1510 if (!il->scan_tx_ant[NL80211_BAND_5GHZ]) 1511 il->scan_tx_ant[NL80211_BAND_5GHZ] = ant_idx; 1512 if (!il->scan_tx_ant[NL80211_BAND_2GHZ]) 1513 il->scan_tx_ant[NL80211_BAND_2GHZ] = ant_idx; 1514 } 1515 EXPORT_SYMBOL(il_init_scan_params); 1516 1517 static int 1518 il_scan_initiate(struct il_priv *il, struct ieee80211_vif *vif) 1519 { 1520 int ret; 1521 1522 lockdep_assert_held(&il->mutex); 1523 1524 cancel_delayed_work(&il->scan_check); 1525 1526 if (!il_is_ready_rf(il)) { 1527 IL_WARN("Request scan called when driver not ready.\n"); 1528 return -EIO; 1529 } 1530 1531 if (test_bit(S_SCAN_HW, &il->status)) { 1532 D_SCAN("Multiple concurrent scan requests in parallel.\n"); 1533 return -EBUSY; 1534 } 1535 1536 if (test_bit(S_SCAN_ABORTING, &il->status)) { 1537 D_SCAN("Scan request while abort pending.\n"); 1538 return -EBUSY; 1539 } 1540 1541 D_SCAN("Starting scan...\n"); 1542 1543 set_bit(S_SCANNING, &il->status); 1544 il->scan_start = jiffies; 1545 1546 ret = il->ops->request_scan(il, vif); 1547 if (ret) { 1548 clear_bit(S_SCANNING, &il->status); 1549 return ret; 1550 } 1551 1552 queue_delayed_work(il->workqueue, &il->scan_check, 1553 IL_SCAN_CHECK_WATCHDOG); 1554 1555 return 0; 1556 } 1557 1558 int 1559 il_mac_hw_scan(struct ieee80211_hw *hw, struct ieee80211_vif *vif, 1560 struct ieee80211_scan_request *hw_req) 1561 { 1562 struct cfg80211_scan_request *req = &hw_req->req; 1563 struct il_priv *il = hw->priv; 1564 int ret; 1565 1566 if (req->n_channels == 0) { 1567 IL_ERR("Can not scan on no channels.\n"); 1568 return -EINVAL; 1569 } 1570 1571 mutex_lock(&il->mutex); 1572 D_MAC80211("enter\n"); 1573 1574 if (test_bit(S_SCANNING, &il->status)) { 1575 D_SCAN("Scan already in progress.\n"); 1576 ret = -EAGAIN; 1577 goto out_unlock; 1578 } 1579 1580 /* mac80211 will only ask for one band at a time */ 1581 il->scan_request = req; 1582 il->scan_vif = vif; 1583 il->scan_band = req->channels[0]->band; 1584 1585 ret = il_scan_initiate(il, vif); 1586 1587 out_unlock: 1588 D_MAC80211("leave ret %d\n", ret); 1589 mutex_unlock(&il->mutex); 1590 1591 return ret; 1592 } 1593 EXPORT_SYMBOL(il_mac_hw_scan); 1594 1595 static void 1596 il_bg_scan_check(struct work_struct *data) 1597 { 1598 struct il_priv *il = 1599 container_of(data, struct il_priv, scan_check.work); 1600 1601 D_SCAN("Scan check work\n"); 1602 1603 /* Since we are here firmware does not finish scan and 1604 * most likely is in bad shape, so we don't bother to 1605 * send abort command, just force scan complete to mac80211 */ 1606 mutex_lock(&il->mutex); 1607 il_force_scan_end(il); 1608 mutex_unlock(&il->mutex); 1609 } 1610 1611 /* 1612 * il_fill_probe_req - fill in all required fields and IE for probe request 1613 */ 1614 u16 1615 il_fill_probe_req(struct il_priv *il, struct ieee80211_mgmt *frame, 1616 const u8 *ta, const u8 *ies, int ie_len, int left) 1617 { 1618 int len = 0; 1619 u8 *pos = NULL; 1620 1621 /* Make sure there is enough space for the probe request, 1622 * two mandatory IEs and the data */ 1623 left -= 24; 1624 if (left < 0) 1625 return 0; 1626 1627 frame->frame_control = cpu_to_le16(IEEE80211_STYPE_PROBE_REQ); 1628 eth_broadcast_addr(frame->da); 1629 memcpy(frame->sa, ta, ETH_ALEN); 1630 eth_broadcast_addr(frame->bssid); 1631 frame->seq_ctrl = 0; 1632 1633 len += 24; 1634 1635 /* ...next IE... */ 1636 pos = &frame->u.probe_req.variable[0]; 1637 1638 /* fill in our indirect SSID IE */ 1639 left -= 2; 1640 if (left < 0) 1641 return 0; 1642 *pos++ = WLAN_EID_SSID; 1643 *pos++ = 0; 1644 1645 len += 2; 1646 1647 if (WARN_ON(left < ie_len)) 1648 return len; 1649 1650 if (ies && ie_len) { 1651 memcpy(pos, ies, ie_len); 1652 len += ie_len; 1653 } 1654 1655 return (u16) len; 1656 } 1657 EXPORT_SYMBOL(il_fill_probe_req); 1658 1659 static void 1660 il_bg_abort_scan(struct work_struct *work) 1661 { 1662 struct il_priv *il = container_of(work, struct il_priv, abort_scan); 1663 1664 D_SCAN("Abort scan work\n"); 1665 1666 /* We keep scan_check work queued in case when firmware will not 1667 * report back scan completed notification */ 1668 mutex_lock(&il->mutex); 1669 il_scan_cancel_timeout(il, 200); 1670 mutex_unlock(&il->mutex); 1671 } 1672 1673 static void 1674 il_bg_scan_completed(struct work_struct *work) 1675 { 1676 struct il_priv *il = container_of(work, struct il_priv, scan_completed); 1677 bool aborted; 1678 1679 D_SCAN("Completed scan.\n"); 1680 1681 cancel_delayed_work(&il->scan_check); 1682 1683 mutex_lock(&il->mutex); 1684 1685 aborted = test_and_clear_bit(S_SCAN_ABORTING, &il->status); 1686 if (aborted) 1687 D_SCAN("Aborted scan completed.\n"); 1688 1689 if (!test_and_clear_bit(S_SCANNING, &il->status)) { 1690 D_SCAN("Scan already completed.\n"); 1691 goto out_settings; 1692 } 1693 1694 il_complete_scan(il, aborted); 1695 1696 out_settings: 1697 /* Can we still talk to firmware ? */ 1698 if (!il_is_ready_rf(il)) 1699 goto out; 1700 1701 /* 1702 * We do not commit power settings while scan is pending, 1703 * do it now if the settings changed. 1704 */ 1705 il_power_set_mode(il, &il->power_data.sleep_cmd_next, false); 1706 il_set_tx_power(il, il->tx_power_next, false); 1707 1708 il->ops->post_scan(il); 1709 1710 out: 1711 mutex_unlock(&il->mutex); 1712 } 1713 1714 void 1715 il_setup_scan_deferred_work(struct il_priv *il) 1716 { 1717 INIT_WORK(&il->scan_completed, il_bg_scan_completed); 1718 INIT_WORK(&il->abort_scan, il_bg_abort_scan); 1719 INIT_DELAYED_WORK(&il->scan_check, il_bg_scan_check); 1720 } 1721 EXPORT_SYMBOL(il_setup_scan_deferred_work); 1722 1723 void 1724 il_cancel_scan_deferred_work(struct il_priv *il) 1725 { 1726 cancel_work_sync(&il->abort_scan); 1727 cancel_work_sync(&il->scan_completed); 1728 1729 if (cancel_delayed_work_sync(&il->scan_check)) { 1730 mutex_lock(&il->mutex); 1731 il_force_scan_end(il); 1732 mutex_unlock(&il->mutex); 1733 } 1734 } 1735 EXPORT_SYMBOL(il_cancel_scan_deferred_work); 1736 1737 /* il->sta_lock must be held */ 1738 static void 1739 il_sta_ucode_activate(struct il_priv *il, u8 sta_id) 1740 { 1741 1742 if (!(il->stations[sta_id].used & IL_STA_DRIVER_ACTIVE)) 1743 IL_ERR("ACTIVATE a non DRIVER active station id %u addr %pM\n", 1744 sta_id, il->stations[sta_id].sta.sta.addr); 1745 1746 if (il->stations[sta_id].used & IL_STA_UCODE_ACTIVE) { 1747 D_ASSOC("STA id %u addr %pM already present" 1748 " in uCode (according to driver)\n", sta_id, 1749 il->stations[sta_id].sta.sta.addr); 1750 } else { 1751 il->stations[sta_id].used |= IL_STA_UCODE_ACTIVE; 1752 D_ASSOC("Added STA id %u addr %pM to uCode\n", sta_id, 1753 il->stations[sta_id].sta.sta.addr); 1754 } 1755 } 1756 1757 static int 1758 il_process_add_sta_resp(struct il_priv *il, struct il_addsta_cmd *addsta, 1759 struct il_rx_pkt *pkt, bool sync) 1760 { 1761 u8 sta_id = addsta->sta.sta_id; 1762 unsigned long flags; 1763 int ret = -EIO; 1764 1765 if (pkt->hdr.flags & IL_CMD_FAILED_MSK) { 1766 IL_ERR("Bad return from C_ADD_STA (0x%08X)\n", pkt->hdr.flags); 1767 return ret; 1768 } 1769 1770 D_INFO("Processing response for adding station %u\n", sta_id); 1771 1772 spin_lock_irqsave(&il->sta_lock, flags); 1773 1774 switch (pkt->u.add_sta.status) { 1775 case ADD_STA_SUCCESS_MSK: 1776 D_INFO("C_ADD_STA PASSED\n"); 1777 il_sta_ucode_activate(il, sta_id); 1778 ret = 0; 1779 break; 1780 case ADD_STA_NO_ROOM_IN_TBL: 1781 IL_ERR("Adding station %d failed, no room in table.\n", sta_id); 1782 break; 1783 case ADD_STA_NO_BLOCK_ACK_RESOURCE: 1784 IL_ERR("Adding station %d failed, no block ack resource.\n", 1785 sta_id); 1786 break; 1787 case ADD_STA_MODIFY_NON_EXIST_STA: 1788 IL_ERR("Attempting to modify non-existing station %d\n", 1789 sta_id); 1790 break; 1791 default: 1792 D_ASSOC("Received C_ADD_STA:(0x%08X)\n", pkt->u.add_sta.status); 1793 break; 1794 } 1795 1796 D_INFO("%s station id %u addr %pM\n", 1797 il->stations[sta_id].sta.mode == 1798 STA_CONTROL_MODIFY_MSK ? "Modified" : "Added", sta_id, 1799 il->stations[sta_id].sta.sta.addr); 1800 1801 /* 1802 * XXX: The MAC address in the command buffer is often changed from 1803 * the original sent to the device. That is, the MAC address 1804 * written to the command buffer often is not the same MAC address 1805 * read from the command buffer when the command returns. This 1806 * issue has not yet been resolved and this debugging is left to 1807 * observe the problem. 1808 */ 1809 D_INFO("%s station according to cmd buffer %pM\n", 1810 il->stations[sta_id].sta.mode == 1811 STA_CONTROL_MODIFY_MSK ? "Modified" : "Added", addsta->sta.addr); 1812 spin_unlock_irqrestore(&il->sta_lock, flags); 1813 1814 return ret; 1815 } 1816 1817 static void 1818 il_add_sta_callback(struct il_priv *il, struct il_device_cmd *cmd, 1819 struct il_rx_pkt *pkt) 1820 { 1821 struct il_addsta_cmd *addsta = (struct il_addsta_cmd *)cmd->cmd.payload; 1822 1823 il_process_add_sta_resp(il, addsta, pkt, false); 1824 1825 } 1826 1827 int 1828 il_send_add_sta(struct il_priv *il, struct il_addsta_cmd *sta, u8 flags) 1829 { 1830 struct il_rx_pkt *pkt = NULL; 1831 int ret = 0; 1832 u8 data[sizeof(*sta)]; 1833 struct il_host_cmd cmd = { 1834 .id = C_ADD_STA, 1835 .flags = flags, 1836 .data = data, 1837 }; 1838 u8 sta_id __maybe_unused = sta->sta.sta_id; 1839 1840 D_INFO("Adding sta %u (%pM) %ssynchronously\n", sta_id, sta->sta.addr, 1841 flags & CMD_ASYNC ? "a" : ""); 1842 1843 if (flags & CMD_ASYNC) 1844 cmd.callback = il_add_sta_callback; 1845 else { 1846 cmd.flags |= CMD_WANT_SKB; 1847 might_sleep(); 1848 } 1849 1850 cmd.len = il->ops->build_addsta_hcmd(sta, data); 1851 ret = il_send_cmd(il, &cmd); 1852 if (ret) 1853 return ret; 1854 if (flags & CMD_ASYNC) 1855 return 0; 1856 1857 pkt = (struct il_rx_pkt *)cmd.reply_page; 1858 ret = il_process_add_sta_resp(il, sta, pkt, true); 1859 1860 il_free_pages(il, cmd.reply_page); 1861 1862 return ret; 1863 } 1864 EXPORT_SYMBOL(il_send_add_sta); 1865 1866 static void 1867 il_set_ht_add_station(struct il_priv *il, u8 idx, struct ieee80211_sta *sta) 1868 { 1869 struct ieee80211_sta_ht_cap *sta_ht_inf = &sta->deflink.ht_cap; 1870 __le32 sta_flags; 1871 1872 if (!sta || !sta_ht_inf->ht_supported) 1873 goto done; 1874 1875 D_ASSOC("spatial multiplexing power save mode: %s\n", 1876 (sta->deflink.smps_mode == IEEE80211_SMPS_STATIC) ? "static" : 1877 (sta->deflink.smps_mode == IEEE80211_SMPS_DYNAMIC) ? "dynamic" : 1878 "disabled"); 1879 1880 sta_flags = il->stations[idx].sta.station_flags; 1881 1882 sta_flags &= ~(STA_FLG_RTS_MIMO_PROT_MSK | STA_FLG_MIMO_DIS_MSK); 1883 1884 switch (sta->deflink.smps_mode) { 1885 case IEEE80211_SMPS_STATIC: 1886 sta_flags |= STA_FLG_MIMO_DIS_MSK; 1887 break; 1888 case IEEE80211_SMPS_DYNAMIC: 1889 sta_flags |= STA_FLG_RTS_MIMO_PROT_MSK; 1890 break; 1891 case IEEE80211_SMPS_OFF: 1892 break; 1893 default: 1894 IL_WARN("Invalid MIMO PS mode %d\n", sta->deflink.smps_mode); 1895 break; 1896 } 1897 1898 sta_flags |= 1899 cpu_to_le32((u32) sta_ht_inf-> 1900 ampdu_factor << STA_FLG_MAX_AGG_SIZE_POS); 1901 1902 sta_flags |= 1903 cpu_to_le32((u32) sta_ht_inf-> 1904 ampdu_density << STA_FLG_AGG_MPDU_DENSITY_POS); 1905 1906 if (il_is_ht40_tx_allowed(il, &sta->deflink.ht_cap)) 1907 sta_flags |= STA_FLG_HT40_EN_MSK; 1908 else 1909 sta_flags &= ~STA_FLG_HT40_EN_MSK; 1910 1911 il->stations[idx].sta.station_flags = sta_flags; 1912 done: 1913 return; 1914 } 1915 1916 /* 1917 * il_prep_station - Prepare station information for addition 1918 * 1919 * should be called with sta_lock held 1920 */ 1921 u8 1922 il_prep_station(struct il_priv *il, const u8 *addr, bool is_ap, 1923 struct ieee80211_sta *sta) 1924 { 1925 struct il_station_entry *station; 1926 int i; 1927 u8 sta_id = IL_INVALID_STATION; 1928 u16 rate; 1929 1930 if (is_ap) 1931 sta_id = IL_AP_ID; 1932 else if (is_broadcast_ether_addr(addr)) 1933 sta_id = il->hw_params.bcast_id; 1934 else 1935 for (i = IL_STA_ID; i < il->hw_params.max_stations; i++) { 1936 if (ether_addr_equal(il->stations[i].sta.sta.addr, 1937 addr)) { 1938 sta_id = i; 1939 break; 1940 } 1941 1942 if (!il->stations[i].used && 1943 sta_id == IL_INVALID_STATION) 1944 sta_id = i; 1945 } 1946 1947 /* 1948 * These two conditions have the same outcome, but keep them 1949 * separate 1950 */ 1951 if (unlikely(sta_id == IL_INVALID_STATION)) 1952 return sta_id; 1953 1954 /* 1955 * uCode is not able to deal with multiple requests to add a 1956 * station. Keep track if one is in progress so that we do not send 1957 * another. 1958 */ 1959 if (il->stations[sta_id].used & IL_STA_UCODE_INPROGRESS) { 1960 D_INFO("STA %d already in process of being added.\n", sta_id); 1961 return sta_id; 1962 } 1963 1964 if ((il->stations[sta_id].used & IL_STA_DRIVER_ACTIVE) && 1965 (il->stations[sta_id].used & IL_STA_UCODE_ACTIVE) && 1966 ether_addr_equal(il->stations[sta_id].sta.sta.addr, addr)) { 1967 D_ASSOC("STA %d (%pM) already added, not adding again.\n", 1968 sta_id, addr); 1969 return sta_id; 1970 } 1971 1972 station = &il->stations[sta_id]; 1973 station->used = IL_STA_DRIVER_ACTIVE; 1974 D_ASSOC("Add STA to driver ID %d: %pM\n", sta_id, addr); 1975 il->num_stations++; 1976 1977 /* Set up the C_ADD_STA command to send to device */ 1978 memset(&station->sta, 0, sizeof(struct il_addsta_cmd)); 1979 memcpy(station->sta.sta.addr, addr, ETH_ALEN); 1980 station->sta.mode = 0; 1981 station->sta.sta.sta_id = sta_id; 1982 station->sta.station_flags = 0; 1983 1984 /* 1985 * OK to call unconditionally, since local stations (IBSS BSSID 1986 * STA and broadcast STA) pass in a NULL sta, and mac80211 1987 * doesn't allow HT IBSS. 1988 */ 1989 il_set_ht_add_station(il, sta_id, sta); 1990 1991 /* 3945 only */ 1992 rate = (il->band == NL80211_BAND_5GHZ) ? RATE_6M_PLCP : RATE_1M_PLCP; 1993 /* Turn on both antennas for the station... */ 1994 station->sta.rate_n_flags = cpu_to_le16(rate | RATE_MCS_ANT_AB_MSK); 1995 1996 return sta_id; 1997 1998 } 1999 EXPORT_SYMBOL_GPL(il_prep_station); 2000 2001 #define STA_WAIT_TIMEOUT (HZ/2) 2002 2003 /* 2004 * il_add_station_common - 2005 */ 2006 int 2007 il_add_station_common(struct il_priv *il, const u8 *addr, bool is_ap, 2008 struct ieee80211_sta *sta, u8 *sta_id_r) 2009 { 2010 unsigned long flags_spin; 2011 int ret = 0; 2012 u8 sta_id; 2013 struct il_addsta_cmd sta_cmd; 2014 2015 *sta_id_r = 0; 2016 spin_lock_irqsave(&il->sta_lock, flags_spin); 2017 sta_id = il_prep_station(il, addr, is_ap, sta); 2018 if (sta_id == IL_INVALID_STATION) { 2019 IL_ERR("Unable to prepare station %pM for addition\n", addr); 2020 spin_unlock_irqrestore(&il->sta_lock, flags_spin); 2021 return -EINVAL; 2022 } 2023 2024 /* 2025 * uCode is not able to deal with multiple requests to add a 2026 * station. Keep track if one is in progress so that we do not send 2027 * another. 2028 */ 2029 if (il->stations[sta_id].used & IL_STA_UCODE_INPROGRESS) { 2030 D_INFO("STA %d already in process of being added.\n", sta_id); 2031 spin_unlock_irqrestore(&il->sta_lock, flags_spin); 2032 return -EEXIST; 2033 } 2034 2035 if ((il->stations[sta_id].used & IL_STA_DRIVER_ACTIVE) && 2036 (il->stations[sta_id].used & IL_STA_UCODE_ACTIVE)) { 2037 D_ASSOC("STA %d (%pM) already added, not adding again.\n", 2038 sta_id, addr); 2039 spin_unlock_irqrestore(&il->sta_lock, flags_spin); 2040 return -EEXIST; 2041 } 2042 2043 il->stations[sta_id].used |= IL_STA_UCODE_INPROGRESS; 2044 memcpy(&sta_cmd, &il->stations[sta_id].sta, 2045 sizeof(struct il_addsta_cmd)); 2046 spin_unlock_irqrestore(&il->sta_lock, flags_spin); 2047 2048 /* Add station to device's station table */ 2049 ret = il_send_add_sta(il, &sta_cmd, CMD_SYNC); 2050 if (ret) { 2051 spin_lock_irqsave(&il->sta_lock, flags_spin); 2052 IL_ERR("Adding station %pM failed.\n", 2053 il->stations[sta_id].sta.sta.addr); 2054 il->stations[sta_id].used &= ~IL_STA_DRIVER_ACTIVE; 2055 il->stations[sta_id].used &= ~IL_STA_UCODE_INPROGRESS; 2056 spin_unlock_irqrestore(&il->sta_lock, flags_spin); 2057 } 2058 *sta_id_r = sta_id; 2059 return ret; 2060 } 2061 EXPORT_SYMBOL(il_add_station_common); 2062 2063 /* 2064 * il_sta_ucode_deactivate - deactivate ucode status for a station 2065 * 2066 * il->sta_lock must be held 2067 */ 2068 static void 2069 il_sta_ucode_deactivate(struct il_priv *il, u8 sta_id) 2070 { 2071 /* Ucode must be active and driver must be non active */ 2072 if ((il->stations[sta_id]. 2073 used & (IL_STA_UCODE_ACTIVE | IL_STA_DRIVER_ACTIVE)) != 2074 IL_STA_UCODE_ACTIVE) 2075 IL_ERR("removed non active STA %u\n", sta_id); 2076 2077 il->stations[sta_id].used &= ~IL_STA_UCODE_ACTIVE; 2078 2079 memset(&il->stations[sta_id], 0, sizeof(struct il_station_entry)); 2080 D_ASSOC("Removed STA %u\n", sta_id); 2081 } 2082 2083 static int 2084 il_send_remove_station(struct il_priv *il, const u8 * addr, int sta_id, 2085 bool temporary) 2086 { 2087 struct il_rx_pkt *pkt; 2088 int ret; 2089 2090 unsigned long flags_spin; 2091 struct il_rem_sta_cmd rm_sta_cmd; 2092 2093 struct il_host_cmd cmd = { 2094 .id = C_REM_STA, 2095 .len = sizeof(struct il_rem_sta_cmd), 2096 .flags = CMD_SYNC, 2097 .data = &rm_sta_cmd, 2098 }; 2099 2100 memset(&rm_sta_cmd, 0, sizeof(rm_sta_cmd)); 2101 rm_sta_cmd.num_sta = 1; 2102 memcpy(&rm_sta_cmd.addr, addr, ETH_ALEN); 2103 2104 cmd.flags |= CMD_WANT_SKB; 2105 2106 ret = il_send_cmd(il, &cmd); 2107 2108 if (ret) 2109 return ret; 2110 2111 pkt = (struct il_rx_pkt *)cmd.reply_page; 2112 if (pkt->hdr.flags & IL_CMD_FAILED_MSK) { 2113 IL_ERR("Bad return from C_REM_STA (0x%08X)\n", pkt->hdr.flags); 2114 ret = -EIO; 2115 } 2116 2117 if (!ret) { 2118 switch (pkt->u.rem_sta.status) { 2119 case REM_STA_SUCCESS_MSK: 2120 if (!temporary) { 2121 spin_lock_irqsave(&il->sta_lock, flags_spin); 2122 il_sta_ucode_deactivate(il, sta_id); 2123 spin_unlock_irqrestore(&il->sta_lock, 2124 flags_spin); 2125 } 2126 D_ASSOC("C_REM_STA PASSED\n"); 2127 break; 2128 default: 2129 ret = -EIO; 2130 IL_ERR("C_REM_STA failed\n"); 2131 break; 2132 } 2133 } 2134 il_free_pages(il, cmd.reply_page); 2135 2136 return ret; 2137 } 2138 2139 /* 2140 * il_remove_station - Remove driver's knowledge of station. 2141 */ 2142 int 2143 il_remove_station(struct il_priv *il, const u8 sta_id, const u8 * addr) 2144 { 2145 unsigned long flags; 2146 2147 if (!il_is_ready(il)) { 2148 D_INFO("Unable to remove station %pM, device not ready.\n", 2149 addr); 2150 /* 2151 * It is typical for stations to be removed when we are 2152 * going down. Return success since device will be down 2153 * soon anyway 2154 */ 2155 return 0; 2156 } 2157 2158 D_ASSOC("Removing STA from driver:%d %pM\n", sta_id, addr); 2159 2160 if (WARN_ON(sta_id == IL_INVALID_STATION)) 2161 return -EINVAL; 2162 2163 spin_lock_irqsave(&il->sta_lock, flags); 2164 2165 if (!(il->stations[sta_id].used & IL_STA_DRIVER_ACTIVE)) { 2166 D_INFO("Removing %pM but non DRIVER active\n", addr); 2167 goto out_err; 2168 } 2169 2170 if (!(il->stations[sta_id].used & IL_STA_UCODE_ACTIVE)) { 2171 D_INFO("Removing %pM but non UCODE active\n", addr); 2172 goto out_err; 2173 } 2174 2175 if (il->stations[sta_id].used & IL_STA_LOCAL) { 2176 kfree(il->stations[sta_id].lq); 2177 il->stations[sta_id].lq = NULL; 2178 } 2179 2180 il->stations[sta_id].used &= ~IL_STA_DRIVER_ACTIVE; 2181 2182 il->num_stations--; 2183 2184 BUG_ON(il->num_stations < 0); 2185 2186 spin_unlock_irqrestore(&il->sta_lock, flags); 2187 2188 return il_send_remove_station(il, addr, sta_id, false); 2189 out_err: 2190 spin_unlock_irqrestore(&il->sta_lock, flags); 2191 return -EINVAL; 2192 } 2193 EXPORT_SYMBOL_GPL(il_remove_station); 2194 2195 /* 2196 * il_clear_ucode_stations - clear ucode station table bits 2197 * 2198 * This function clears all the bits in the driver indicating 2199 * which stations are active in the ucode. Call when something 2200 * other than explicit station management would cause this in 2201 * the ucode, e.g. unassociated RXON. 2202 */ 2203 void 2204 il_clear_ucode_stations(struct il_priv *il) 2205 { 2206 int i; 2207 unsigned long flags_spin; 2208 bool cleared = false; 2209 2210 D_INFO("Clearing ucode stations in driver\n"); 2211 2212 spin_lock_irqsave(&il->sta_lock, flags_spin); 2213 for (i = 0; i < il->hw_params.max_stations; i++) { 2214 if (il->stations[i].used & IL_STA_UCODE_ACTIVE) { 2215 D_INFO("Clearing ucode active for station %d\n", i); 2216 il->stations[i].used &= ~IL_STA_UCODE_ACTIVE; 2217 cleared = true; 2218 } 2219 } 2220 spin_unlock_irqrestore(&il->sta_lock, flags_spin); 2221 2222 if (!cleared) 2223 D_INFO("No active stations found to be cleared\n"); 2224 } 2225 EXPORT_SYMBOL(il_clear_ucode_stations); 2226 2227 /* 2228 * il_restore_stations() - Restore driver known stations to device 2229 * 2230 * All stations considered active by driver, but not present in ucode, is 2231 * restored. 2232 * 2233 * Function sleeps. 2234 */ 2235 void 2236 il_restore_stations(struct il_priv *il) 2237 { 2238 struct il_addsta_cmd sta_cmd; 2239 struct il_link_quality_cmd lq; 2240 unsigned long flags_spin; 2241 int i; 2242 bool found = false; 2243 int ret; 2244 bool send_lq; 2245 2246 if (!il_is_ready(il)) { 2247 D_INFO("Not ready yet, not restoring any stations.\n"); 2248 return; 2249 } 2250 2251 D_ASSOC("Restoring all known stations ... start.\n"); 2252 spin_lock_irqsave(&il->sta_lock, flags_spin); 2253 for (i = 0; i < il->hw_params.max_stations; i++) { 2254 if ((il->stations[i].used & IL_STA_DRIVER_ACTIVE) && 2255 !(il->stations[i].used & IL_STA_UCODE_ACTIVE)) { 2256 D_ASSOC("Restoring sta %pM\n", 2257 il->stations[i].sta.sta.addr); 2258 il->stations[i].sta.mode = 0; 2259 il->stations[i].used |= IL_STA_UCODE_INPROGRESS; 2260 found = true; 2261 } 2262 } 2263 2264 for (i = 0; i < il->hw_params.max_stations; i++) { 2265 if ((il->stations[i].used & IL_STA_UCODE_INPROGRESS)) { 2266 memcpy(&sta_cmd, &il->stations[i].sta, 2267 sizeof(struct il_addsta_cmd)); 2268 send_lq = false; 2269 if (il->stations[i].lq) { 2270 memcpy(&lq, il->stations[i].lq, 2271 sizeof(struct il_link_quality_cmd)); 2272 send_lq = true; 2273 } 2274 spin_unlock_irqrestore(&il->sta_lock, flags_spin); 2275 ret = il_send_add_sta(il, &sta_cmd, CMD_SYNC); 2276 if (ret) { 2277 spin_lock_irqsave(&il->sta_lock, flags_spin); 2278 IL_ERR("Adding station %pM failed.\n", 2279 il->stations[i].sta.sta.addr); 2280 il->stations[i].used &= ~IL_STA_DRIVER_ACTIVE; 2281 il->stations[i].used &= 2282 ~IL_STA_UCODE_INPROGRESS; 2283 spin_unlock_irqrestore(&il->sta_lock, 2284 flags_spin); 2285 } 2286 /* 2287 * Rate scaling has already been initialized, send 2288 * current LQ command 2289 */ 2290 if (send_lq) 2291 il_send_lq_cmd(il, &lq, CMD_SYNC, true); 2292 spin_lock_irqsave(&il->sta_lock, flags_spin); 2293 il->stations[i].used &= ~IL_STA_UCODE_INPROGRESS; 2294 } 2295 } 2296 2297 spin_unlock_irqrestore(&il->sta_lock, flags_spin); 2298 if (!found) 2299 D_INFO("Restoring all known stations" 2300 " .... no stations to be restored.\n"); 2301 else 2302 D_INFO("Restoring all known stations" " .... complete.\n"); 2303 } 2304 EXPORT_SYMBOL(il_restore_stations); 2305 2306 int 2307 il_get_free_ucode_key_idx(struct il_priv *il) 2308 { 2309 int i; 2310 2311 for (i = 0; i < il->sta_key_max_num; i++) 2312 if (!test_and_set_bit(i, &il->ucode_key_table)) 2313 return i; 2314 2315 return WEP_INVALID_OFFSET; 2316 } 2317 EXPORT_SYMBOL(il_get_free_ucode_key_idx); 2318 2319 void 2320 il_dealloc_bcast_stations(struct il_priv *il) 2321 { 2322 unsigned long flags; 2323 int i; 2324 2325 spin_lock_irqsave(&il->sta_lock, flags); 2326 for (i = 0; i < il->hw_params.max_stations; i++) { 2327 if (!(il->stations[i].used & IL_STA_BCAST)) 2328 continue; 2329 2330 il->stations[i].used &= ~IL_STA_UCODE_ACTIVE; 2331 il->num_stations--; 2332 BUG_ON(il->num_stations < 0); 2333 kfree(il->stations[i].lq); 2334 il->stations[i].lq = NULL; 2335 } 2336 spin_unlock_irqrestore(&il->sta_lock, flags); 2337 } 2338 EXPORT_SYMBOL_GPL(il_dealloc_bcast_stations); 2339 2340 #ifdef CONFIG_IWLEGACY_DEBUG 2341 static void 2342 il_dump_lq_cmd(struct il_priv *il, struct il_link_quality_cmd *lq) 2343 { 2344 int i; 2345 D_RATE("lq station id 0x%x\n", lq->sta_id); 2346 D_RATE("lq ant 0x%X 0x%X\n", lq->general_params.single_stream_ant_msk, 2347 lq->general_params.dual_stream_ant_msk); 2348 2349 for (i = 0; i < LINK_QUAL_MAX_RETRY_NUM; i++) 2350 D_RATE("lq idx %d 0x%X\n", i, lq->rs_table[i].rate_n_flags); 2351 } 2352 #else 2353 static inline void 2354 il_dump_lq_cmd(struct il_priv *il, struct il_link_quality_cmd *lq) 2355 { 2356 } 2357 #endif 2358 2359 /* 2360 * il_is_lq_table_valid() - Test one aspect of LQ cmd for validity 2361 * 2362 * It sometimes happens when a HT rate has been in use and we 2363 * loose connectivity with AP then mac80211 will first tell us that the 2364 * current channel is not HT anymore before removing the station. In such a 2365 * scenario the RXON flags will be updated to indicate we are not 2366 * communicating HT anymore, but the LQ command may still contain HT rates. 2367 * Test for this to prevent driver from sending LQ command between the time 2368 * RXON flags are updated and when LQ command is updated. 2369 */ 2370 static bool 2371 il_is_lq_table_valid(struct il_priv *il, struct il_link_quality_cmd *lq) 2372 { 2373 int i; 2374 2375 if (il->ht.enabled) 2376 return true; 2377 2378 D_INFO("Channel %u is not an HT channel\n", il->active.channel); 2379 for (i = 0; i < LINK_QUAL_MAX_RETRY_NUM; i++) { 2380 if (le32_to_cpu(lq->rs_table[i].rate_n_flags) & RATE_MCS_HT_MSK) { 2381 D_INFO("idx %d of LQ expects HT channel\n", i); 2382 return false; 2383 } 2384 } 2385 return true; 2386 } 2387 2388 /* 2389 * il_send_lq_cmd() - Send link quality command 2390 * @init: This command is sent as part of station initialization right 2391 * after station has been added. 2392 * 2393 * The link quality command is sent as the last step of station creation. 2394 * This is the special case in which init is set and we call a callback in 2395 * this case to clear the state indicating that station creation is in 2396 * progress. 2397 */ 2398 int 2399 il_send_lq_cmd(struct il_priv *il, struct il_link_quality_cmd *lq, 2400 u8 flags, bool init) 2401 { 2402 int ret = 0; 2403 unsigned long flags_spin; 2404 2405 struct il_host_cmd cmd = { 2406 .id = C_TX_LINK_QUALITY_CMD, 2407 .len = sizeof(struct il_link_quality_cmd), 2408 .flags = flags, 2409 .data = lq, 2410 }; 2411 2412 if (WARN_ON(lq->sta_id == IL_INVALID_STATION)) 2413 return -EINVAL; 2414 2415 spin_lock_irqsave(&il->sta_lock, flags_spin); 2416 if (!(il->stations[lq->sta_id].used & IL_STA_DRIVER_ACTIVE)) { 2417 spin_unlock_irqrestore(&il->sta_lock, flags_spin); 2418 return -EINVAL; 2419 } 2420 spin_unlock_irqrestore(&il->sta_lock, flags_spin); 2421 2422 il_dump_lq_cmd(il, lq); 2423 BUG_ON(init && (cmd.flags & CMD_ASYNC)); 2424 2425 if (il_is_lq_table_valid(il, lq)) 2426 ret = il_send_cmd(il, &cmd); 2427 else 2428 ret = -EINVAL; 2429 2430 if (cmd.flags & CMD_ASYNC) 2431 return ret; 2432 2433 if (init) { 2434 D_INFO("init LQ command complete," 2435 " clearing sta addition status for sta %d\n", 2436 lq->sta_id); 2437 spin_lock_irqsave(&il->sta_lock, flags_spin); 2438 il->stations[lq->sta_id].used &= ~IL_STA_UCODE_INPROGRESS; 2439 spin_unlock_irqrestore(&il->sta_lock, flags_spin); 2440 } 2441 return ret; 2442 } 2443 EXPORT_SYMBOL(il_send_lq_cmd); 2444 2445 int 2446 il_mac_sta_remove(struct ieee80211_hw *hw, struct ieee80211_vif *vif, 2447 struct ieee80211_sta *sta) 2448 { 2449 struct il_priv *il = hw->priv; 2450 struct il_station_priv_common *sta_common = (void *)sta->drv_priv; 2451 int ret; 2452 2453 mutex_lock(&il->mutex); 2454 D_MAC80211("enter station %pM\n", sta->addr); 2455 2456 ret = il_remove_station(il, sta_common->sta_id, sta->addr); 2457 if (ret) 2458 IL_ERR("Error removing station %pM\n", sta->addr); 2459 2460 D_MAC80211("leave ret %d\n", ret); 2461 mutex_unlock(&il->mutex); 2462 2463 return ret; 2464 } 2465 EXPORT_SYMBOL(il_mac_sta_remove); 2466 2467 /************************** RX-FUNCTIONS ****************************/ 2468 /* 2469 * Rx theory of operation 2470 * 2471 * Driver allocates a circular buffer of Receive Buffer Descriptors (RBDs), 2472 * each of which point to Receive Buffers to be filled by the NIC. These get 2473 * used not only for Rx frames, but for any command response or notification 2474 * from the NIC. The driver and NIC manage the Rx buffers by means 2475 * of idxes into the circular buffer. 2476 * 2477 * Rx Queue Indexes 2478 * The host/firmware share two idx registers for managing the Rx buffers. 2479 * 2480 * The READ idx maps to the first position that the firmware may be writing 2481 * to -- the driver can read up to (but not including) this position and get 2482 * good data. 2483 * The READ idx is managed by the firmware once the card is enabled. 2484 * 2485 * The WRITE idx maps to the last position the driver has read from -- the 2486 * position preceding WRITE is the last slot the firmware can place a packet. 2487 * 2488 * The queue is empty (no good data) if WRITE = READ - 1, and is full if 2489 * WRITE = READ. 2490 * 2491 * During initialization, the host sets up the READ queue position to the first 2492 * IDX position, and WRITE to the last (READ - 1 wrapped) 2493 * 2494 * When the firmware places a packet in a buffer, it will advance the READ idx 2495 * and fire the RX interrupt. The driver can then query the READ idx and 2496 * process as many packets as possible, moving the WRITE idx forward as it 2497 * resets the Rx queue buffers with new memory. 2498 * 2499 * The management in the driver is as follows: 2500 * + A list of pre-allocated SKBs is stored in iwl->rxq->rx_free. When 2501 * iwl->rxq->free_count drops to or below RX_LOW_WATERMARK, work is scheduled 2502 * to replenish the iwl->rxq->rx_free. 2503 * + In il_rx_replenish (scheduled) if 'processed' != 'read' then the 2504 * iwl->rxq is replenished and the READ IDX is updated (updating the 2505 * 'processed' and 'read' driver idxes as well) 2506 * + A received packet is processed and handed to the kernel network stack, 2507 * detached from the iwl->rxq. The driver 'processed' idx is updated. 2508 * + The Host/Firmware iwl->rxq is replenished at tasklet time from the rx_free 2509 * list. If there are no allocated buffers in iwl->rxq->rx_free, the READ 2510 * IDX is not incremented and iwl->status(RX_STALLED) is set. If there 2511 * were enough free buffers and RX_STALLED is set it is cleared. 2512 * 2513 * 2514 * Driver sequence: 2515 * 2516 * il_rx_queue_alloc() Allocates rx_free 2517 * il_rx_replenish() Replenishes rx_free list from rx_used, and calls 2518 * il_rx_queue_restock 2519 * il_rx_queue_restock() Moves available buffers from rx_free into Rx 2520 * queue, updates firmware pointers, and updates 2521 * the WRITE idx. If insufficient rx_free buffers 2522 * are available, schedules il_rx_replenish 2523 * 2524 * -- enable interrupts -- 2525 * ISR - il_rx() Detach il_rx_bufs from pool up to the 2526 * READ IDX, detaching the SKB from the pool. 2527 * Moves the packet buffer from queue to rx_used. 2528 * Calls il_rx_queue_restock to refill any empty 2529 * slots. 2530 * ... 2531 * 2532 */ 2533 2534 /* 2535 * il_rx_queue_space - Return number of free slots available in queue. 2536 */ 2537 int 2538 il_rx_queue_space(const struct il_rx_queue *q) 2539 { 2540 int s = q->read - q->write; 2541 if (s <= 0) 2542 s += RX_QUEUE_SIZE; 2543 /* keep some buffer to not confuse full and empty queue */ 2544 s -= 2; 2545 if (s < 0) 2546 s = 0; 2547 return s; 2548 } 2549 EXPORT_SYMBOL(il_rx_queue_space); 2550 2551 /* 2552 * il_rx_queue_update_write_ptr - Update the write pointer for the RX queue 2553 */ 2554 void 2555 il_rx_queue_update_write_ptr(struct il_priv *il, struct il_rx_queue *q) 2556 { 2557 unsigned long flags; 2558 u32 rx_wrt_ptr_reg = il->hw_params.rx_wrt_ptr_reg; 2559 u32 reg; 2560 2561 spin_lock_irqsave(&q->lock, flags); 2562 2563 if (q->need_update == 0) 2564 goto exit_unlock; 2565 2566 /* If power-saving is in use, make sure device is awake */ 2567 if (test_bit(S_POWER_PMI, &il->status)) { 2568 reg = _il_rd(il, CSR_UCODE_DRV_GP1); 2569 2570 if (reg & CSR_UCODE_DRV_GP1_BIT_MAC_SLEEP) { 2571 D_INFO("Rx queue requesting wakeup," " GP1 = 0x%x\n", 2572 reg); 2573 il_set_bit(il, CSR_GP_CNTRL, 2574 CSR_GP_CNTRL_REG_FLAG_MAC_ACCESS_REQ); 2575 goto exit_unlock; 2576 } 2577 2578 q->write_actual = (q->write & ~0x7); 2579 il_wr(il, rx_wrt_ptr_reg, q->write_actual); 2580 2581 /* Else device is assumed to be awake */ 2582 } else { 2583 /* Device expects a multiple of 8 */ 2584 q->write_actual = (q->write & ~0x7); 2585 il_wr(il, rx_wrt_ptr_reg, q->write_actual); 2586 } 2587 2588 q->need_update = 0; 2589 2590 exit_unlock: 2591 spin_unlock_irqrestore(&q->lock, flags); 2592 } 2593 EXPORT_SYMBOL(il_rx_queue_update_write_ptr); 2594 2595 int 2596 il_rx_queue_alloc(struct il_priv *il) 2597 { 2598 struct il_rx_queue *rxq = &il->rxq; 2599 struct device *dev = &il->pci_dev->dev; 2600 int i; 2601 2602 spin_lock_init(&rxq->lock); 2603 INIT_LIST_HEAD(&rxq->rx_free); 2604 INIT_LIST_HEAD(&rxq->rx_used); 2605 2606 /* Alloc the circular buffer of Read Buffer Descriptors (RBDs) */ 2607 rxq->bd = dma_alloc_coherent(dev, 4 * RX_QUEUE_SIZE, &rxq->bd_dma, 2608 GFP_KERNEL); 2609 if (!rxq->bd) 2610 goto err_bd; 2611 2612 rxq->rb_stts = dma_alloc_coherent(dev, sizeof(struct il_rb_status), 2613 &rxq->rb_stts_dma, GFP_KERNEL); 2614 if (!rxq->rb_stts) 2615 goto err_rb; 2616 2617 /* Fill the rx_used queue with _all_ of the Rx buffers */ 2618 for (i = 0; i < RX_FREE_BUFFERS + RX_QUEUE_SIZE; i++) 2619 list_add_tail(&rxq->pool[i].list, &rxq->rx_used); 2620 2621 /* Set us so that we have processed and used all buffers, but have 2622 * not restocked the Rx queue with fresh buffers */ 2623 rxq->read = rxq->write = 0; 2624 rxq->write_actual = 0; 2625 rxq->free_count = 0; 2626 rxq->need_update = 0; 2627 return 0; 2628 2629 err_rb: 2630 dma_free_coherent(&il->pci_dev->dev, 4 * RX_QUEUE_SIZE, rxq->bd, 2631 rxq->bd_dma); 2632 err_bd: 2633 return -ENOMEM; 2634 } 2635 EXPORT_SYMBOL(il_rx_queue_alloc); 2636 2637 void 2638 il_hdl_spectrum_measurement(struct il_priv *il, struct il_rx_buf *rxb) 2639 { 2640 struct il_rx_pkt *pkt = rxb_addr(rxb); 2641 struct il_spectrum_notification *report = &(pkt->u.spectrum_notif); 2642 2643 if (!report->state) { 2644 D_11H("Spectrum Measure Notification: Start\n"); 2645 return; 2646 } 2647 2648 memcpy(&il->measure_report, report, sizeof(*report)); 2649 il->measurement_status |= MEASUREMENT_READY; 2650 } 2651 EXPORT_SYMBOL(il_hdl_spectrum_measurement); 2652 2653 /* 2654 * returns non-zero if packet should be dropped 2655 */ 2656 int 2657 il_set_decrypted_flag(struct il_priv *il, struct ieee80211_hdr *hdr, 2658 u32 decrypt_res, struct ieee80211_rx_status *stats) 2659 { 2660 u16 fc = le16_to_cpu(hdr->frame_control); 2661 2662 /* 2663 * All contexts have the same setting here due to it being 2664 * a module parameter, so OK to check any context. 2665 */ 2666 if (il->active.filter_flags & RXON_FILTER_DIS_DECRYPT_MSK) 2667 return 0; 2668 2669 if (!(fc & IEEE80211_FCTL_PROTECTED)) 2670 return 0; 2671 2672 D_RX("decrypt_res:0x%x\n", decrypt_res); 2673 switch (decrypt_res & RX_RES_STATUS_SEC_TYPE_MSK) { 2674 case RX_RES_STATUS_SEC_TYPE_TKIP: 2675 /* The uCode has got a bad phase 1 Key, pushes the packet. 2676 * Decryption will be done in SW. */ 2677 if ((decrypt_res & RX_RES_STATUS_DECRYPT_TYPE_MSK) == 2678 RX_RES_STATUS_BAD_KEY_TTAK) 2679 break; 2680 fallthrough; 2681 2682 case RX_RES_STATUS_SEC_TYPE_WEP: 2683 if ((decrypt_res & RX_RES_STATUS_DECRYPT_TYPE_MSK) == 2684 RX_RES_STATUS_BAD_ICV_MIC) { 2685 /* bad ICV, the packet is destroyed since the 2686 * decryption is inplace, drop it */ 2687 D_RX("Packet destroyed\n"); 2688 return -1; 2689 } 2690 fallthrough; 2691 case RX_RES_STATUS_SEC_TYPE_CCMP: 2692 if ((decrypt_res & RX_RES_STATUS_DECRYPT_TYPE_MSK) == 2693 RX_RES_STATUS_DECRYPT_OK) { 2694 D_RX("hw decrypt successfully!!!\n"); 2695 stats->flag |= RX_FLAG_DECRYPTED; 2696 } 2697 break; 2698 2699 default: 2700 break; 2701 } 2702 return 0; 2703 } 2704 EXPORT_SYMBOL(il_set_decrypted_flag); 2705 2706 /* 2707 * il_txq_update_write_ptr - Send new write idx to hardware 2708 */ 2709 void 2710 il_txq_update_write_ptr(struct il_priv *il, struct il_tx_queue *txq) 2711 { 2712 u32 reg = 0; 2713 int txq_id = txq->q.id; 2714 2715 if (txq->need_update == 0) 2716 return; 2717 2718 /* if we're trying to save power */ 2719 if (test_bit(S_POWER_PMI, &il->status)) { 2720 /* wake up nic if it's powered down ... 2721 * uCode will wake up, and interrupt us again, so next 2722 * time we'll skip this part. */ 2723 reg = _il_rd(il, CSR_UCODE_DRV_GP1); 2724 2725 if (reg & CSR_UCODE_DRV_GP1_BIT_MAC_SLEEP) { 2726 D_INFO("Tx queue %d requesting wakeup," " GP1 = 0x%x\n", 2727 txq_id, reg); 2728 il_set_bit(il, CSR_GP_CNTRL, 2729 CSR_GP_CNTRL_REG_FLAG_MAC_ACCESS_REQ); 2730 return; 2731 } 2732 2733 il_wr(il, HBUS_TARG_WRPTR, txq->q.write_ptr | (txq_id << 8)); 2734 2735 /* 2736 * else not in power-save mode, 2737 * uCode will never sleep when we're 2738 * trying to tx (during RFKILL, we're not trying to tx). 2739 */ 2740 } else 2741 _il_wr(il, HBUS_TARG_WRPTR, txq->q.write_ptr | (txq_id << 8)); 2742 txq->need_update = 0; 2743 } 2744 EXPORT_SYMBOL(il_txq_update_write_ptr); 2745 2746 /* 2747 * il_tx_queue_unmap - Unmap any remaining DMA mappings and free skb's 2748 */ 2749 void 2750 il_tx_queue_unmap(struct il_priv *il, int txq_id) 2751 { 2752 struct il_tx_queue *txq = &il->txq[txq_id]; 2753 struct il_queue *q = &txq->q; 2754 2755 if (q->n_bd == 0) 2756 return; 2757 2758 while (q->write_ptr != q->read_ptr) { 2759 il->ops->txq_free_tfd(il, txq); 2760 q->read_ptr = il_queue_inc_wrap(q->read_ptr, q->n_bd); 2761 } 2762 } 2763 EXPORT_SYMBOL(il_tx_queue_unmap); 2764 2765 /* 2766 * il_tx_queue_free - Deallocate DMA queue. 2767 * @txq: Transmit queue to deallocate. 2768 * 2769 * Empty queue by removing and destroying all BD's. 2770 * Free all buffers. 2771 * 0-fill, but do not free "txq" descriptor structure. 2772 */ 2773 void 2774 il_tx_queue_free(struct il_priv *il, int txq_id) 2775 { 2776 struct il_tx_queue *txq = &il->txq[txq_id]; 2777 struct device *dev = &il->pci_dev->dev; 2778 int i; 2779 2780 il_tx_queue_unmap(il, txq_id); 2781 2782 /* De-alloc array of command/tx buffers */ 2783 if (txq->cmd) { 2784 for (i = 0; i < TFD_TX_CMD_SLOTS; i++) 2785 kfree(txq->cmd[i]); 2786 } 2787 2788 /* De-alloc circular buffer of TFDs */ 2789 if (txq->q.n_bd) 2790 dma_free_coherent(dev, il->hw_params.tfd_size * txq->q.n_bd, 2791 txq->tfds, txq->q.dma_addr); 2792 2793 /* De-alloc array of per-TFD driver data */ 2794 kfree(txq->skbs); 2795 txq->skbs = NULL; 2796 2797 /* deallocate arrays */ 2798 kfree(txq->cmd); 2799 kfree(txq->meta); 2800 txq->cmd = NULL; 2801 txq->meta = NULL; 2802 2803 /* 0-fill queue descriptor structure */ 2804 memset(txq, 0, sizeof(*txq)); 2805 } 2806 EXPORT_SYMBOL(il_tx_queue_free); 2807 2808 /* 2809 * il_cmd_queue_unmap - Unmap any remaining DMA mappings from command queue 2810 */ 2811 void 2812 il_cmd_queue_unmap(struct il_priv *il) 2813 { 2814 struct il_tx_queue *txq = &il->txq[il->cmd_queue]; 2815 struct il_queue *q = &txq->q; 2816 int i; 2817 2818 if (q->n_bd == 0) 2819 return; 2820 2821 while (q->read_ptr != q->write_ptr) { 2822 i = il_get_cmd_idx(q, q->read_ptr, 0); 2823 2824 if (txq->meta[i].flags & CMD_MAPPED) { 2825 dma_unmap_single(&il->pci_dev->dev, 2826 dma_unmap_addr(&txq->meta[i], mapping), 2827 dma_unmap_len(&txq->meta[i], len), 2828 DMA_BIDIRECTIONAL); 2829 txq->meta[i].flags = 0; 2830 } 2831 2832 q->read_ptr = il_queue_inc_wrap(q->read_ptr, q->n_bd); 2833 } 2834 2835 i = q->n_win; 2836 if (txq->meta[i].flags & CMD_MAPPED) { 2837 dma_unmap_single(&il->pci_dev->dev, 2838 dma_unmap_addr(&txq->meta[i], mapping), 2839 dma_unmap_len(&txq->meta[i], len), 2840 DMA_BIDIRECTIONAL); 2841 txq->meta[i].flags = 0; 2842 } 2843 } 2844 EXPORT_SYMBOL(il_cmd_queue_unmap); 2845 2846 /* 2847 * il_cmd_queue_free - Deallocate DMA queue. 2848 * 2849 * Empty queue by removing and destroying all BD's. 2850 * Free all buffers. 2851 * 0-fill, but do not free "txq" descriptor structure. 2852 */ 2853 void 2854 il_cmd_queue_free(struct il_priv *il) 2855 { 2856 struct il_tx_queue *txq = &il->txq[il->cmd_queue]; 2857 struct device *dev = &il->pci_dev->dev; 2858 int i; 2859 2860 il_cmd_queue_unmap(il); 2861 2862 /* De-alloc array of command/tx buffers */ 2863 if (txq->cmd) { 2864 for (i = 0; i <= TFD_CMD_SLOTS; i++) 2865 kfree(txq->cmd[i]); 2866 } 2867 2868 /* De-alloc circular buffer of TFDs */ 2869 if (txq->q.n_bd) 2870 dma_free_coherent(dev, il->hw_params.tfd_size * txq->q.n_bd, 2871 txq->tfds, txq->q.dma_addr); 2872 2873 /* deallocate arrays */ 2874 kfree(txq->cmd); 2875 kfree(txq->meta); 2876 txq->cmd = NULL; 2877 txq->meta = NULL; 2878 2879 /* 0-fill queue descriptor structure */ 2880 memset(txq, 0, sizeof(*txq)); 2881 } 2882 EXPORT_SYMBOL(il_cmd_queue_free); 2883 2884 /*************** DMA-QUEUE-GENERAL-FUNCTIONS ***** 2885 * DMA services 2886 * 2887 * Theory of operation 2888 * 2889 * A Tx or Rx queue resides in host DRAM, and is comprised of a circular buffer 2890 * of buffer descriptors, each of which points to one or more data buffers for 2891 * the device to read from or fill. Driver and device exchange status of each 2892 * queue via "read" and "write" pointers. Driver keeps minimum of 2 empty 2893 * entries in each circular buffer, to protect against confusing empty and full 2894 * queue states. 2895 * 2896 * The device reads or writes the data in the queues via the device's several 2897 * DMA/FIFO channels. Each queue is mapped to a single DMA channel. 2898 * 2899 * For Tx queue, there are low mark and high mark limits. If, after queuing 2900 * the packet for Tx, free space become < low mark, Tx queue stopped. When 2901 * reclaiming packets (on 'tx done IRQ), if free space become > high mark, 2902 * Tx queue resumed. 2903 * 2904 * See more detailed info in 4965.h. 2905 ***************************************************/ 2906 2907 int 2908 il_queue_space(const struct il_queue *q) 2909 { 2910 int s = q->read_ptr - q->write_ptr; 2911 2912 if (q->read_ptr > q->write_ptr) 2913 s -= q->n_bd; 2914 2915 if (s <= 0) 2916 s += q->n_win; 2917 /* keep some reserve to not confuse empty and full situations */ 2918 s -= 2; 2919 if (s < 0) 2920 s = 0; 2921 return s; 2922 } 2923 EXPORT_SYMBOL(il_queue_space); 2924 2925 2926 /* 2927 * il_queue_init - Initialize queue's high/low-water and read/write idxes 2928 */ 2929 static int 2930 il_queue_init(struct il_priv *il, struct il_queue *q, int slots, u32 id) 2931 { 2932 /* 2933 * TFD_QUEUE_SIZE_MAX must be power-of-two size, otherwise 2934 * il_queue_inc_wrap and il_queue_dec_wrap are broken. 2935 */ 2936 BUILD_BUG_ON(TFD_QUEUE_SIZE_MAX & (TFD_QUEUE_SIZE_MAX - 1)); 2937 /* FIXME: remove q->n_bd */ 2938 q->n_bd = TFD_QUEUE_SIZE_MAX; 2939 2940 q->n_win = slots; 2941 q->id = id; 2942 2943 /* slots_must be power-of-two size, otherwise 2944 * il_get_cmd_idx is broken. */ 2945 BUG_ON(!is_power_of_2(slots)); 2946 2947 q->low_mark = q->n_win / 4; 2948 if (q->low_mark < 4) 2949 q->low_mark = 4; 2950 2951 q->high_mark = q->n_win / 8; 2952 if (q->high_mark < 2) 2953 q->high_mark = 2; 2954 2955 q->write_ptr = q->read_ptr = 0; 2956 2957 return 0; 2958 } 2959 2960 /* 2961 * il_tx_queue_alloc - Alloc driver data and TFD CB for one Tx/cmd queue 2962 */ 2963 static int 2964 il_tx_queue_alloc(struct il_priv *il, struct il_tx_queue *txq, u32 id) 2965 { 2966 struct device *dev = &il->pci_dev->dev; 2967 size_t tfd_sz = il->hw_params.tfd_size * TFD_QUEUE_SIZE_MAX; 2968 2969 /* Driver ilate data, only for Tx (not command) queues, 2970 * not shared with device. */ 2971 if (id != il->cmd_queue) { 2972 txq->skbs = kcalloc(TFD_QUEUE_SIZE_MAX, 2973 sizeof(struct sk_buff *), 2974 GFP_KERNEL); 2975 if (!txq->skbs) { 2976 IL_ERR("Fail to alloc skbs\n"); 2977 goto error; 2978 } 2979 } else 2980 txq->skbs = NULL; 2981 2982 /* Circular buffer of transmit frame descriptors (TFDs), 2983 * shared with device */ 2984 txq->tfds = 2985 dma_alloc_coherent(dev, tfd_sz, &txq->q.dma_addr, GFP_KERNEL); 2986 if (!txq->tfds) 2987 goto error; 2988 2989 txq->q.id = id; 2990 2991 return 0; 2992 2993 error: 2994 kfree(txq->skbs); 2995 txq->skbs = NULL; 2996 2997 return -ENOMEM; 2998 } 2999 3000 /* 3001 * il_tx_queue_init - Allocate and initialize one tx/cmd queue 3002 */ 3003 int 3004 il_tx_queue_init(struct il_priv *il, u32 txq_id) 3005 { 3006 int i, len, ret; 3007 int slots, actual_slots; 3008 struct il_tx_queue *txq = &il->txq[txq_id]; 3009 3010 /* 3011 * Alloc buffer array for commands (Tx or other types of commands). 3012 * For the command queue (#4/#9), allocate command space + one big 3013 * command for scan, since scan command is very huge; the system will 3014 * not have two scans at the same time, so only one is needed. 3015 * For normal Tx queues (all other queues), no super-size command 3016 * space is needed. 3017 */ 3018 if (txq_id == il->cmd_queue) { 3019 slots = TFD_CMD_SLOTS; 3020 actual_slots = slots + 1; 3021 } else { 3022 slots = TFD_TX_CMD_SLOTS; 3023 actual_slots = slots; 3024 } 3025 3026 txq->meta = 3027 kcalloc(actual_slots, sizeof(struct il_cmd_meta), GFP_KERNEL); 3028 txq->cmd = 3029 kcalloc(actual_slots, sizeof(struct il_device_cmd *), GFP_KERNEL); 3030 3031 if (!txq->meta || !txq->cmd) 3032 goto out_free_arrays; 3033 3034 len = sizeof(struct il_device_cmd); 3035 for (i = 0; i < actual_slots; i++) { 3036 /* only happens for cmd queue */ 3037 if (i == slots) 3038 len = IL_MAX_CMD_SIZE; 3039 3040 txq->cmd[i] = kmalloc(len, GFP_KERNEL); 3041 if (!txq->cmd[i]) 3042 goto err; 3043 } 3044 3045 /* Alloc driver data array and TFD circular buffer */ 3046 ret = il_tx_queue_alloc(il, txq, txq_id); 3047 if (ret) 3048 goto err; 3049 3050 txq->need_update = 0; 3051 3052 /* 3053 * For the default queues 0-3, set up the swq_id 3054 * already -- all others need to get one later 3055 * (if they need one at all). 3056 */ 3057 if (txq_id < 4) 3058 il_set_swq_id(txq, txq_id, txq_id); 3059 3060 /* Initialize queue's high/low-water marks, and head/tail idxes */ 3061 il_queue_init(il, &txq->q, slots, txq_id); 3062 3063 /* Tell device where to find queue */ 3064 il->ops->txq_init(il, txq); 3065 3066 return 0; 3067 err: 3068 for (i = 0; i < actual_slots; i++) 3069 kfree(txq->cmd[i]); 3070 out_free_arrays: 3071 kfree(txq->meta); 3072 txq->meta = NULL; 3073 kfree(txq->cmd); 3074 txq->cmd = NULL; 3075 3076 return -ENOMEM; 3077 } 3078 EXPORT_SYMBOL(il_tx_queue_init); 3079 3080 void 3081 il_tx_queue_reset(struct il_priv *il, u32 txq_id) 3082 { 3083 int slots, actual_slots; 3084 struct il_tx_queue *txq = &il->txq[txq_id]; 3085 3086 if (txq_id == il->cmd_queue) { 3087 slots = TFD_CMD_SLOTS; 3088 actual_slots = TFD_CMD_SLOTS + 1; 3089 } else { 3090 slots = TFD_TX_CMD_SLOTS; 3091 actual_slots = TFD_TX_CMD_SLOTS; 3092 } 3093 3094 memset(txq->meta, 0, sizeof(struct il_cmd_meta) * actual_slots); 3095 txq->need_update = 0; 3096 3097 /* Initialize queue's high/low-water marks, and head/tail idxes */ 3098 il_queue_init(il, &txq->q, slots, txq_id); 3099 3100 /* Tell device where to find queue */ 3101 il->ops->txq_init(il, txq); 3102 } 3103 EXPORT_SYMBOL(il_tx_queue_reset); 3104 3105 /*************** HOST COMMAND QUEUE FUNCTIONS *****/ 3106 3107 /* 3108 * il_enqueue_hcmd - enqueue a uCode command 3109 * @il: device ilate data point 3110 * @cmd: a point to the ucode command structure 3111 * 3112 * The function returns < 0 values to indicate the operation is 3113 * failed. On success, it turns the idx (> 0) of command in the 3114 * command queue. 3115 */ 3116 int 3117 il_enqueue_hcmd(struct il_priv *il, struct il_host_cmd *cmd) 3118 { 3119 struct il_tx_queue *txq = &il->txq[il->cmd_queue]; 3120 struct il_queue *q = &txq->q; 3121 struct il_device_cmd *out_cmd; 3122 struct il_cmd_meta *out_meta; 3123 dma_addr_t phys_addr; 3124 unsigned long flags; 3125 u32 idx; 3126 u16 fix_size; 3127 3128 cmd->len = il->ops->get_hcmd_size(cmd->id, cmd->len); 3129 fix_size = (u16) (cmd->len + sizeof(out_cmd->hdr)); 3130 3131 /* If any of the command structures end up being larger than 3132 * the TFD_MAX_PAYLOAD_SIZE, and it sent as a 'small' command then 3133 * we will need to increase the size of the TFD entries 3134 * Also, check to see if command buffer should not exceed the size 3135 * of device_cmd and max_cmd_size. */ 3136 BUG_ON((fix_size > TFD_MAX_PAYLOAD_SIZE) && 3137 !(cmd->flags & CMD_SIZE_HUGE)); 3138 BUG_ON(fix_size > IL_MAX_CMD_SIZE); 3139 3140 if (il_is_rfkill(il) || il_is_ctkill(il)) { 3141 IL_WARN("Not sending command - %s KILL\n", 3142 il_is_rfkill(il) ? "RF" : "CT"); 3143 return -EIO; 3144 } 3145 3146 spin_lock_irqsave(&il->hcmd_lock, flags); 3147 3148 if (il_queue_space(q) < ((cmd->flags & CMD_ASYNC) ? 2 : 1)) { 3149 spin_unlock_irqrestore(&il->hcmd_lock, flags); 3150 3151 IL_ERR("Restarting adapter due to command queue full\n"); 3152 queue_work(il->workqueue, &il->restart); 3153 return -ENOSPC; 3154 } 3155 3156 idx = il_get_cmd_idx(q, q->write_ptr, cmd->flags & CMD_SIZE_HUGE); 3157 out_cmd = txq->cmd[idx]; 3158 out_meta = &txq->meta[idx]; 3159 3160 if (WARN_ON(out_meta->flags & CMD_MAPPED)) { 3161 spin_unlock_irqrestore(&il->hcmd_lock, flags); 3162 return -ENOSPC; 3163 } 3164 3165 memset(out_meta, 0, sizeof(*out_meta)); /* re-initialize to NULL */ 3166 out_meta->flags = cmd->flags | CMD_MAPPED; 3167 if (cmd->flags & CMD_WANT_SKB) 3168 out_meta->source = cmd; 3169 if (cmd->flags & CMD_ASYNC) 3170 out_meta->callback = cmd->callback; 3171 3172 out_cmd->hdr.cmd = cmd->id; 3173 memcpy(&out_cmd->cmd.payload, cmd->data, cmd->len); 3174 3175 /* At this point, the out_cmd now has all of the incoming cmd 3176 * information */ 3177 3178 out_cmd->hdr.flags = 0; 3179 out_cmd->hdr.sequence = 3180 cpu_to_le16(QUEUE_TO_SEQ(il->cmd_queue) | IDX_TO_SEQ(q->write_ptr)); 3181 if (cmd->flags & CMD_SIZE_HUGE) 3182 out_cmd->hdr.sequence |= SEQ_HUGE_FRAME; 3183 3184 #ifdef CONFIG_IWLEGACY_DEBUG 3185 switch (out_cmd->hdr.cmd) { 3186 case C_TX_LINK_QUALITY_CMD: 3187 case C_SENSITIVITY: 3188 D_HC_DUMP("Sending command %s (#%x), seq: 0x%04X, " 3189 "%d bytes at %d[%d]:%d\n", 3190 il_get_cmd_string(out_cmd->hdr.cmd), out_cmd->hdr.cmd, 3191 le16_to_cpu(out_cmd->hdr.sequence), fix_size, 3192 q->write_ptr, idx, il->cmd_queue); 3193 break; 3194 default: 3195 D_HC("Sending command %s (#%x), seq: 0x%04X, " 3196 "%d bytes at %d[%d]:%d\n", 3197 il_get_cmd_string(out_cmd->hdr.cmd), out_cmd->hdr.cmd, 3198 le16_to_cpu(out_cmd->hdr.sequence), fix_size, q->write_ptr, 3199 idx, il->cmd_queue); 3200 } 3201 #endif 3202 3203 phys_addr = dma_map_single(&il->pci_dev->dev, &out_cmd->hdr, fix_size, 3204 DMA_BIDIRECTIONAL); 3205 if (unlikely(dma_mapping_error(&il->pci_dev->dev, phys_addr))) { 3206 idx = -ENOMEM; 3207 goto out; 3208 } 3209 dma_unmap_addr_set(out_meta, mapping, phys_addr); 3210 dma_unmap_len_set(out_meta, len, fix_size); 3211 3212 txq->need_update = 1; 3213 3214 if (il->ops->txq_update_byte_cnt_tbl) 3215 /* Set up entry in queue's byte count circular buffer */ 3216 il->ops->txq_update_byte_cnt_tbl(il, txq, 0); 3217 3218 il->ops->txq_attach_buf_to_tfd(il, txq, phys_addr, fix_size, 1, 3219 U32_PAD(cmd->len)); 3220 3221 /* Increment and update queue's write idx */ 3222 q->write_ptr = il_queue_inc_wrap(q->write_ptr, q->n_bd); 3223 il_txq_update_write_ptr(il, txq); 3224 3225 out: 3226 spin_unlock_irqrestore(&il->hcmd_lock, flags); 3227 return idx; 3228 } 3229 3230 /* 3231 * il_hcmd_queue_reclaim - Reclaim TX command queue entries already Tx'd 3232 * 3233 * When FW advances 'R' idx, all entries between old and new 'R' idx 3234 * need to be reclaimed. As result, some free space forms. If there is 3235 * enough free space (> low mark), wake the stack that feeds us. 3236 */ 3237 static void 3238 il_hcmd_queue_reclaim(struct il_priv *il, int txq_id, int idx, int cmd_idx) 3239 { 3240 struct il_tx_queue *txq = &il->txq[txq_id]; 3241 struct il_queue *q = &txq->q; 3242 int nfreed = 0; 3243 3244 if (idx >= q->n_bd || il_queue_used(q, idx) == 0) { 3245 IL_ERR("Read idx for DMA queue txq id (%d), idx %d, " 3246 "is out of range [0-%d] %d %d.\n", txq_id, idx, q->n_bd, 3247 q->write_ptr, q->read_ptr); 3248 return; 3249 } 3250 3251 for (idx = il_queue_inc_wrap(idx, q->n_bd); q->read_ptr != idx; 3252 q->read_ptr = il_queue_inc_wrap(q->read_ptr, q->n_bd)) { 3253 3254 if (nfreed++ > 0) { 3255 IL_ERR("HCMD skipped: idx (%d) %d %d\n", idx, 3256 q->write_ptr, q->read_ptr); 3257 queue_work(il->workqueue, &il->restart); 3258 } 3259 3260 } 3261 } 3262 3263 /* 3264 * il_tx_cmd_complete - Pull unused buffers off the queue and reclaim them 3265 * @rxb: Rx buffer to reclaim 3266 * 3267 * If an Rx buffer has an async callback associated with it the callback 3268 * will be executed. The attached skb (if present) will only be freed 3269 * if the callback returns 1 3270 */ 3271 void 3272 il_tx_cmd_complete(struct il_priv *il, struct il_rx_buf *rxb) 3273 { 3274 struct il_rx_pkt *pkt = rxb_addr(rxb); 3275 u16 sequence = le16_to_cpu(pkt->hdr.sequence); 3276 int txq_id = SEQ_TO_QUEUE(sequence); 3277 int idx = SEQ_TO_IDX(sequence); 3278 int cmd_idx; 3279 bool huge = !!(pkt->hdr.sequence & SEQ_HUGE_FRAME); 3280 struct il_device_cmd *cmd; 3281 struct il_cmd_meta *meta; 3282 struct il_tx_queue *txq = &il->txq[il->cmd_queue]; 3283 unsigned long flags; 3284 3285 /* If a Tx command is being handled and it isn't in the actual 3286 * command queue then there a command routing bug has been introduced 3287 * in the queue management code. */ 3288 if (WARN 3289 (txq_id != il->cmd_queue, 3290 "wrong command queue %d (should be %d), sequence 0x%X readp=%d writep=%d\n", 3291 txq_id, il->cmd_queue, sequence, il->txq[il->cmd_queue].q.read_ptr, 3292 il->txq[il->cmd_queue].q.write_ptr)) { 3293 il_print_hex_error(il, pkt, 32); 3294 return; 3295 } 3296 3297 cmd_idx = il_get_cmd_idx(&txq->q, idx, huge); 3298 cmd = txq->cmd[cmd_idx]; 3299 meta = &txq->meta[cmd_idx]; 3300 3301 txq->time_stamp = jiffies; 3302 3303 dma_unmap_single(&il->pci_dev->dev, dma_unmap_addr(meta, mapping), 3304 dma_unmap_len(meta, len), DMA_BIDIRECTIONAL); 3305 3306 /* Input error checking is done when commands are added to queue. */ 3307 if (meta->flags & CMD_WANT_SKB) { 3308 meta->source->reply_page = (unsigned long)rxb_addr(rxb); 3309 rxb->page = NULL; 3310 } else if (meta->callback) 3311 meta->callback(il, cmd, pkt); 3312 3313 spin_lock_irqsave(&il->hcmd_lock, flags); 3314 3315 il_hcmd_queue_reclaim(il, txq_id, idx, cmd_idx); 3316 3317 if (!(meta->flags & CMD_ASYNC)) { 3318 clear_bit(S_HCMD_ACTIVE, &il->status); 3319 D_INFO("Clearing HCMD_ACTIVE for command %s\n", 3320 il_get_cmd_string(cmd->hdr.cmd)); 3321 wake_up(&il->wait_command_queue); 3322 } 3323 3324 /* Mark as unmapped */ 3325 meta->flags = 0; 3326 3327 spin_unlock_irqrestore(&il->hcmd_lock, flags); 3328 } 3329 EXPORT_SYMBOL(il_tx_cmd_complete); 3330 3331 MODULE_DESCRIPTION("iwl-legacy: common functions for 3945 and 4965"); 3332 MODULE_VERSION(IWLWIFI_VERSION); 3333 MODULE_AUTHOR(DRV_COPYRIGHT " " DRV_AUTHOR); 3334 MODULE_LICENSE("GPL"); 3335 3336 /* 3337 * set bt_coex_active to true, uCode will do kill/defer 3338 * every time the priority line is asserted (BT is sending signals on the 3339 * priority line in the PCIx). 3340 * set bt_coex_active to false, uCode will ignore the BT activity and 3341 * perform the normal operation 3342 * 3343 * User might experience transmit issue on some platform due to WiFi/BT 3344 * co-exist problem. The possible behaviors are: 3345 * Able to scan and finding all the available AP 3346 * Not able to associate with any AP 3347 * On those platforms, WiFi communication can be restored by set 3348 * "bt_coex_active" module parameter to "false" 3349 * 3350 * default: bt_coex_active = true (BT_COEX_ENABLE) 3351 */ 3352 static bool bt_coex_active = true; 3353 module_param(bt_coex_active, bool, 0444); 3354 MODULE_PARM_DESC(bt_coex_active, "enable wifi/bluetooth co-exist"); 3355 3356 u32 il_debug_level; 3357 EXPORT_SYMBOL(il_debug_level); 3358 3359 const u8 il_bcast_addr[ETH_ALEN] = { 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF }; 3360 EXPORT_SYMBOL(il_bcast_addr); 3361 3362 #define MAX_BIT_RATE_40_MHZ 150 /* Mbps */ 3363 #define MAX_BIT_RATE_20_MHZ 72 /* Mbps */ 3364 static void 3365 il_init_ht_hw_capab(const struct il_priv *il, 3366 struct ieee80211_sta_ht_cap *ht_info, 3367 enum nl80211_band band) 3368 { 3369 u16 max_bit_rate = 0; 3370 u8 rx_chains_num = il->hw_params.rx_chains_num; 3371 u8 tx_chains_num = il->hw_params.tx_chains_num; 3372 3373 ht_info->cap = 0; 3374 memset(&ht_info->mcs, 0, sizeof(ht_info->mcs)); 3375 3376 ht_info->ht_supported = true; 3377 3378 ht_info->cap |= IEEE80211_HT_CAP_SGI_20; 3379 max_bit_rate = MAX_BIT_RATE_20_MHZ; 3380 if (il->hw_params.ht40_channel & BIT(band)) { 3381 ht_info->cap |= IEEE80211_HT_CAP_SUP_WIDTH_20_40; 3382 ht_info->cap |= IEEE80211_HT_CAP_SGI_40; 3383 ht_info->mcs.rx_mask[4] = 0x01; 3384 max_bit_rate = MAX_BIT_RATE_40_MHZ; 3385 } 3386 3387 if (il->cfg->mod_params->amsdu_size_8K) 3388 ht_info->cap |= IEEE80211_HT_CAP_MAX_AMSDU; 3389 3390 ht_info->ampdu_factor = CFG_HT_RX_AMPDU_FACTOR_DEF; 3391 ht_info->ampdu_density = CFG_HT_MPDU_DENSITY_DEF; 3392 3393 ht_info->mcs.rx_mask[0] = 0xFF; 3394 if (rx_chains_num >= 2) 3395 ht_info->mcs.rx_mask[1] = 0xFF; 3396 if (rx_chains_num >= 3) 3397 ht_info->mcs.rx_mask[2] = 0xFF; 3398 3399 /* Highest supported Rx data rate */ 3400 max_bit_rate *= rx_chains_num; 3401 WARN_ON(max_bit_rate & ~IEEE80211_HT_MCS_RX_HIGHEST_MASK); 3402 ht_info->mcs.rx_highest = cpu_to_le16(max_bit_rate); 3403 3404 /* Tx MCS capabilities */ 3405 ht_info->mcs.tx_params = IEEE80211_HT_MCS_TX_DEFINED; 3406 if (tx_chains_num != rx_chains_num) { 3407 ht_info->mcs.tx_params |= IEEE80211_HT_MCS_TX_RX_DIFF; 3408 ht_info->mcs.tx_params |= 3409 ((tx_chains_num - 3410 1) << IEEE80211_HT_MCS_TX_MAX_STREAMS_SHIFT); 3411 } 3412 } 3413 3414 /* 3415 * il_init_geos - Initialize mac80211's geo/channel info based from eeprom 3416 */ 3417 int 3418 il_init_geos(struct il_priv *il) 3419 { 3420 struct il_channel_info *ch; 3421 struct ieee80211_supported_band *sband; 3422 struct ieee80211_channel *channels; 3423 struct ieee80211_channel *geo_ch; 3424 struct ieee80211_rate *rates; 3425 int i = 0; 3426 s8 max_tx_power = 0; 3427 3428 if (il->bands[NL80211_BAND_2GHZ].n_bitrates || 3429 il->bands[NL80211_BAND_5GHZ].n_bitrates) { 3430 D_INFO("Geography modes already initialized.\n"); 3431 set_bit(S_GEO_CONFIGURED, &il->status); 3432 return 0; 3433 } 3434 3435 channels = 3436 kcalloc(il->channel_count, sizeof(struct ieee80211_channel), 3437 GFP_KERNEL); 3438 if (!channels) 3439 return -ENOMEM; 3440 3441 rates = kcalloc(RATE_COUNT_LEGACY, sizeof(*rates), GFP_KERNEL); 3442 if (!rates) { 3443 kfree(channels); 3444 return -ENOMEM; 3445 } 3446 3447 /* 5.2GHz channels start after the 2.4GHz channels */ 3448 sband = &il->bands[NL80211_BAND_5GHZ]; 3449 sband->channels = &channels[ARRAY_SIZE(il_eeprom_band_1)]; 3450 /* just OFDM */ 3451 sband->bitrates = &rates[IL_FIRST_OFDM_RATE]; 3452 sband->n_bitrates = RATE_COUNT_LEGACY - IL_FIRST_OFDM_RATE; 3453 3454 if (il->cfg->sku & IL_SKU_N) 3455 il_init_ht_hw_capab(il, &sband->ht_cap, NL80211_BAND_5GHZ); 3456 3457 sband = &il->bands[NL80211_BAND_2GHZ]; 3458 sband->channels = channels; 3459 /* OFDM & CCK */ 3460 sband->bitrates = rates; 3461 sband->n_bitrates = RATE_COUNT_LEGACY; 3462 3463 if (il->cfg->sku & IL_SKU_N) 3464 il_init_ht_hw_capab(il, &sband->ht_cap, NL80211_BAND_2GHZ); 3465 3466 il->ieee_channels = channels; 3467 il->ieee_rates = rates; 3468 3469 for (i = 0; i < il->channel_count; i++) { 3470 ch = &il->channel_info[i]; 3471 3472 if (!il_is_channel_valid(ch)) 3473 continue; 3474 3475 sband = &il->bands[ch->band]; 3476 3477 geo_ch = &sband->channels[sband->n_channels++]; 3478 3479 geo_ch->center_freq = 3480 ieee80211_channel_to_frequency(ch->channel, ch->band); 3481 geo_ch->max_power = ch->max_power_avg; 3482 geo_ch->max_antenna_gain = 0xff; 3483 geo_ch->hw_value = ch->channel; 3484 3485 if (il_is_channel_valid(ch)) { 3486 if (!(ch->flags & EEPROM_CHANNEL_IBSS)) 3487 geo_ch->flags |= IEEE80211_CHAN_NO_IR; 3488 3489 if (!(ch->flags & EEPROM_CHANNEL_ACTIVE)) 3490 geo_ch->flags |= IEEE80211_CHAN_NO_IR; 3491 3492 if (ch->flags & EEPROM_CHANNEL_RADAR) 3493 geo_ch->flags |= IEEE80211_CHAN_RADAR; 3494 3495 geo_ch->flags |= ch->ht40_extension_channel; 3496 3497 if (ch->max_power_avg > max_tx_power) 3498 max_tx_power = ch->max_power_avg; 3499 } else { 3500 geo_ch->flags |= IEEE80211_CHAN_DISABLED; 3501 } 3502 3503 D_INFO("Channel %d Freq=%d[%sGHz] %s flag=0x%X\n", ch->channel, 3504 geo_ch->center_freq, 3505 il_is_channel_a_band(ch) ? "5.2" : "2.4", 3506 geo_ch-> 3507 flags & IEEE80211_CHAN_DISABLED ? "restricted" : "valid", 3508 geo_ch->flags); 3509 } 3510 3511 il->tx_power_device_lmt = max_tx_power; 3512 il->tx_power_user_lmt = max_tx_power; 3513 il->tx_power_next = max_tx_power; 3514 3515 if (il->bands[NL80211_BAND_5GHZ].n_channels == 0 && 3516 (il->cfg->sku & IL_SKU_A)) { 3517 IL_INFO("Incorrectly detected BG card as ABG. " 3518 "Please send your PCI ID 0x%04X:0x%04X to maintainer.\n", 3519 il->pci_dev->device, il->pci_dev->subsystem_device); 3520 il->cfg->sku &= ~IL_SKU_A; 3521 } 3522 3523 IL_INFO("Tunable channels: %d 802.11bg, %d 802.11a channels\n", 3524 il->bands[NL80211_BAND_2GHZ].n_channels, 3525 il->bands[NL80211_BAND_5GHZ].n_channels); 3526 3527 set_bit(S_GEO_CONFIGURED, &il->status); 3528 3529 return 0; 3530 } 3531 EXPORT_SYMBOL(il_init_geos); 3532 3533 /* 3534 * il_free_geos - undo allocations in il_init_geos 3535 */ 3536 void 3537 il_free_geos(struct il_priv *il) 3538 { 3539 kfree(il->ieee_channels); 3540 kfree(il->ieee_rates); 3541 clear_bit(S_GEO_CONFIGURED, &il->status); 3542 } 3543 EXPORT_SYMBOL(il_free_geos); 3544 3545 static bool 3546 il_is_channel_extension(struct il_priv *il, enum nl80211_band band, 3547 u16 channel, u8 extension_chan_offset) 3548 { 3549 const struct il_channel_info *ch_info; 3550 3551 ch_info = il_get_channel_info(il, band, channel); 3552 if (!il_is_channel_valid(ch_info)) 3553 return false; 3554 3555 if (extension_chan_offset == IEEE80211_HT_PARAM_CHA_SEC_ABOVE) 3556 return !(ch_info-> 3557 ht40_extension_channel & IEEE80211_CHAN_NO_HT40PLUS); 3558 else if (extension_chan_offset == IEEE80211_HT_PARAM_CHA_SEC_BELOW) 3559 return !(ch_info-> 3560 ht40_extension_channel & IEEE80211_CHAN_NO_HT40MINUS); 3561 3562 return false; 3563 } 3564 3565 bool 3566 il_is_ht40_tx_allowed(struct il_priv *il, struct ieee80211_sta_ht_cap *ht_cap) 3567 { 3568 if (!il->ht.enabled || !il->ht.is_40mhz) 3569 return false; 3570 3571 /* 3572 * We do not check for IEEE80211_HT_CAP_SUP_WIDTH_20_40 3573 * the bit will not set if it is pure 40MHz case 3574 */ 3575 if (ht_cap && !ht_cap->ht_supported) 3576 return false; 3577 3578 #ifdef CONFIG_IWLEGACY_DEBUGFS 3579 if (il->disable_ht40) 3580 return false; 3581 #endif 3582 3583 return il_is_channel_extension(il, il->band, 3584 le16_to_cpu(il->staging.channel), 3585 il->ht.extension_chan_offset); 3586 } 3587 EXPORT_SYMBOL(il_is_ht40_tx_allowed); 3588 3589 static u16 noinline 3590 il_adjust_beacon_interval(u16 beacon_val, u16 max_beacon_val) 3591 { 3592 u16 new_val; 3593 u16 beacon_factor; 3594 3595 /* 3596 * If mac80211 hasn't given us a beacon interval, program 3597 * the default into the device. 3598 */ 3599 if (!beacon_val) 3600 return DEFAULT_BEACON_INTERVAL; 3601 3602 /* 3603 * If the beacon interval we obtained from the peer 3604 * is too large, we'll have to wake up more often 3605 * (and in IBSS case, we'll beacon too much) 3606 * 3607 * For example, if max_beacon_val is 4096, and the 3608 * requested beacon interval is 7000, we'll have to 3609 * use 3500 to be able to wake up on the beacons. 3610 * 3611 * This could badly influence beacon detection stats. 3612 */ 3613 3614 beacon_factor = (beacon_val + max_beacon_val) / max_beacon_val; 3615 new_val = beacon_val / beacon_factor; 3616 3617 if (!new_val) 3618 new_val = max_beacon_val; 3619 3620 return new_val; 3621 } 3622 3623 int 3624 il_send_rxon_timing(struct il_priv *il) 3625 { 3626 u64 tsf; 3627 s32 interval_tm, rem; 3628 struct ieee80211_conf *conf = NULL; 3629 u16 beacon_int; 3630 struct ieee80211_vif *vif = il->vif; 3631 3632 conf = &il->hw->conf; 3633 3634 lockdep_assert_held(&il->mutex); 3635 3636 memset(&il->timing, 0, sizeof(struct il_rxon_time_cmd)); 3637 3638 il->timing.timestamp = cpu_to_le64(il->timestamp); 3639 il->timing.listen_interval = cpu_to_le16(conf->listen_interval); 3640 3641 beacon_int = vif ? vif->bss_conf.beacon_int : 0; 3642 3643 /* 3644 * TODO: For IBSS we need to get atim_win from mac80211, 3645 * for now just always use 0 3646 */ 3647 il->timing.atim_win = 0; 3648 3649 beacon_int = 3650 il_adjust_beacon_interval(beacon_int, 3651 il->hw_params.max_beacon_itrvl * 3652 TIME_UNIT); 3653 il->timing.beacon_interval = cpu_to_le16(beacon_int); 3654 3655 tsf = il->timestamp; /* tsf is modifed by do_div: copy it */ 3656 interval_tm = beacon_int * TIME_UNIT; 3657 rem = do_div(tsf, interval_tm); 3658 il->timing.beacon_init_val = cpu_to_le32(interval_tm - rem); 3659 3660 il->timing.dtim_period = vif ? (vif->bss_conf.dtim_period ? : 1) : 1; 3661 3662 D_ASSOC("beacon interval %d beacon timer %d beacon tim %d\n", 3663 le16_to_cpu(il->timing.beacon_interval), 3664 le32_to_cpu(il->timing.beacon_init_val), 3665 le16_to_cpu(il->timing.atim_win)); 3666 3667 return il_send_cmd_pdu(il, C_RXON_TIMING, sizeof(il->timing), 3668 &il->timing); 3669 } 3670 EXPORT_SYMBOL(il_send_rxon_timing); 3671 3672 void 3673 il_set_rxon_hwcrypto(struct il_priv *il, int hw_decrypt) 3674 { 3675 struct il_rxon_cmd *rxon = &il->staging; 3676 3677 if (hw_decrypt) 3678 rxon->filter_flags &= ~RXON_FILTER_DIS_DECRYPT_MSK; 3679 else 3680 rxon->filter_flags |= RXON_FILTER_DIS_DECRYPT_MSK; 3681 3682 } 3683 EXPORT_SYMBOL(il_set_rxon_hwcrypto); 3684 3685 /* validate RXON structure is valid */ 3686 int 3687 il_check_rxon_cmd(struct il_priv *il) 3688 { 3689 struct il_rxon_cmd *rxon = &il->staging; 3690 bool error = false; 3691 3692 if (rxon->flags & RXON_FLG_BAND_24G_MSK) { 3693 if (rxon->flags & RXON_FLG_TGJ_NARROW_BAND_MSK) { 3694 IL_WARN("check 2.4G: wrong narrow\n"); 3695 error = true; 3696 } 3697 if (rxon->flags & RXON_FLG_RADAR_DETECT_MSK) { 3698 IL_WARN("check 2.4G: wrong radar\n"); 3699 error = true; 3700 } 3701 } else { 3702 if (!(rxon->flags & RXON_FLG_SHORT_SLOT_MSK)) { 3703 IL_WARN("check 5.2G: not short slot!\n"); 3704 error = true; 3705 } 3706 if (rxon->flags & RXON_FLG_CCK_MSK) { 3707 IL_WARN("check 5.2G: CCK!\n"); 3708 error = true; 3709 } 3710 } 3711 if ((rxon->node_addr[0] | rxon->bssid_addr[0]) & 0x1) { 3712 IL_WARN("mac/bssid mcast!\n"); 3713 error = true; 3714 } 3715 3716 /* make sure basic rates 6Mbps and 1Mbps are supported */ 3717 if ((rxon->ofdm_basic_rates & RATE_6M_MASK) == 0 && 3718 (rxon->cck_basic_rates & RATE_1M_MASK) == 0) { 3719 IL_WARN("neither 1 nor 6 are basic\n"); 3720 error = true; 3721 } 3722 3723 if (le16_to_cpu(rxon->assoc_id) > 2007) { 3724 IL_WARN("aid > 2007\n"); 3725 error = true; 3726 } 3727 3728 if ((rxon->flags & (RXON_FLG_CCK_MSK | RXON_FLG_SHORT_SLOT_MSK)) == 3729 (RXON_FLG_CCK_MSK | RXON_FLG_SHORT_SLOT_MSK)) { 3730 IL_WARN("CCK and short slot\n"); 3731 error = true; 3732 } 3733 3734 if ((rxon->flags & (RXON_FLG_CCK_MSK | RXON_FLG_AUTO_DETECT_MSK)) == 3735 (RXON_FLG_CCK_MSK | RXON_FLG_AUTO_DETECT_MSK)) { 3736 IL_WARN("CCK and auto detect"); 3737 error = true; 3738 } 3739 3740 if ((rxon-> 3741 flags & (RXON_FLG_AUTO_DETECT_MSK | RXON_FLG_TGG_PROTECT_MSK)) == 3742 RXON_FLG_TGG_PROTECT_MSK) { 3743 IL_WARN("TGg but no auto-detect\n"); 3744 error = true; 3745 } 3746 3747 if (error) 3748 IL_WARN("Tuning to channel %d\n", le16_to_cpu(rxon->channel)); 3749 3750 if (error) { 3751 IL_ERR("Invalid RXON\n"); 3752 return -EINVAL; 3753 } 3754 return 0; 3755 } 3756 EXPORT_SYMBOL(il_check_rxon_cmd); 3757 3758 /* 3759 * il_full_rxon_required - check if full RXON (vs RXON_ASSOC) cmd is needed 3760 * @il: staging_rxon is compared to active_rxon 3761 * 3762 * If the RXON structure is changing enough to require a new tune, 3763 * or is clearing the RXON_FILTER_ASSOC_MSK, then return 1 to indicate that 3764 * a new tune (full RXON command, rather than RXON_ASSOC cmd) is required. 3765 */ 3766 int 3767 il_full_rxon_required(struct il_priv *il) 3768 { 3769 const struct il_rxon_cmd *staging = &il->staging; 3770 const struct il_rxon_cmd *active = &il->active; 3771 3772 #define CHK(cond) \ 3773 if ((cond)) { \ 3774 D_INFO("need full RXON - " #cond "\n"); \ 3775 return 1; \ 3776 } 3777 3778 #define CHK_NEQ(c1, c2) \ 3779 if ((c1) != (c2)) { \ 3780 D_INFO("need full RXON - " \ 3781 #c1 " != " #c2 " - %d != %d\n", \ 3782 (c1), (c2)); \ 3783 return 1; \ 3784 } 3785 3786 /* These items are only settable from the full RXON command */ 3787 CHK(!il_is_associated(il)); 3788 CHK(!ether_addr_equal_64bits(staging->bssid_addr, active->bssid_addr)); 3789 CHK(!ether_addr_equal_64bits(staging->node_addr, active->node_addr)); 3790 CHK(!ether_addr_equal_64bits(staging->wlap_bssid_addr, 3791 active->wlap_bssid_addr)); 3792 CHK_NEQ(staging->dev_type, active->dev_type); 3793 CHK_NEQ(staging->channel, active->channel); 3794 CHK_NEQ(staging->air_propagation, active->air_propagation); 3795 CHK_NEQ(staging->ofdm_ht_single_stream_basic_rates, 3796 active->ofdm_ht_single_stream_basic_rates); 3797 CHK_NEQ(staging->ofdm_ht_dual_stream_basic_rates, 3798 active->ofdm_ht_dual_stream_basic_rates); 3799 CHK_NEQ(staging->assoc_id, active->assoc_id); 3800 3801 /* flags, filter_flags, ofdm_basic_rates, and cck_basic_rates can 3802 * be updated with the RXON_ASSOC command -- however only some 3803 * flag transitions are allowed using RXON_ASSOC */ 3804 3805 /* Check if we are not switching bands */ 3806 CHK_NEQ(staging->flags & RXON_FLG_BAND_24G_MSK, 3807 active->flags & RXON_FLG_BAND_24G_MSK); 3808 3809 /* Check if we are switching association toggle */ 3810 CHK_NEQ(staging->filter_flags & RXON_FILTER_ASSOC_MSK, 3811 active->filter_flags & RXON_FILTER_ASSOC_MSK); 3812 3813 #undef CHK 3814 #undef CHK_NEQ 3815 3816 return 0; 3817 } 3818 EXPORT_SYMBOL(il_full_rxon_required); 3819 3820 u8 3821 il_get_lowest_plcp(struct il_priv *il) 3822 { 3823 /* 3824 * Assign the lowest rate -- should really get this from 3825 * the beacon skb from mac80211. 3826 */ 3827 if (il->staging.flags & RXON_FLG_BAND_24G_MSK) 3828 return RATE_1M_PLCP; 3829 else 3830 return RATE_6M_PLCP; 3831 } 3832 EXPORT_SYMBOL(il_get_lowest_plcp); 3833 3834 static void 3835 _il_set_rxon_ht(struct il_priv *il, struct il_ht_config *ht_conf) 3836 { 3837 struct il_rxon_cmd *rxon = &il->staging; 3838 3839 if (!il->ht.enabled) { 3840 rxon->flags &= 3841 ~(RXON_FLG_CHANNEL_MODE_MSK | 3842 RXON_FLG_CTRL_CHANNEL_LOC_HI_MSK | RXON_FLG_HT40_PROT_MSK 3843 | RXON_FLG_HT_PROT_MSK); 3844 return; 3845 } 3846 3847 rxon->flags |= 3848 cpu_to_le32(il->ht.protection << RXON_FLG_HT_OPERATING_MODE_POS); 3849 3850 /* Set up channel bandwidth: 3851 * 20 MHz only, 20/40 mixed or pure 40 if ht40 ok */ 3852 /* clear the HT channel mode before set the mode */ 3853 rxon->flags &= 3854 ~(RXON_FLG_CHANNEL_MODE_MSK | RXON_FLG_CTRL_CHANNEL_LOC_HI_MSK); 3855 if (il_is_ht40_tx_allowed(il, NULL)) { 3856 /* pure ht40 */ 3857 if (il->ht.protection == IEEE80211_HT_OP_MODE_PROTECTION_20MHZ) { 3858 rxon->flags |= RXON_FLG_CHANNEL_MODE_PURE_40; 3859 /* Note: control channel is opposite of extension channel */ 3860 switch (il->ht.extension_chan_offset) { 3861 case IEEE80211_HT_PARAM_CHA_SEC_ABOVE: 3862 rxon->flags &= 3863 ~RXON_FLG_CTRL_CHANNEL_LOC_HI_MSK; 3864 break; 3865 case IEEE80211_HT_PARAM_CHA_SEC_BELOW: 3866 rxon->flags |= RXON_FLG_CTRL_CHANNEL_LOC_HI_MSK; 3867 break; 3868 } 3869 } else { 3870 /* Note: control channel is opposite of extension channel */ 3871 switch (il->ht.extension_chan_offset) { 3872 case IEEE80211_HT_PARAM_CHA_SEC_ABOVE: 3873 rxon->flags &= 3874 ~(RXON_FLG_CTRL_CHANNEL_LOC_HI_MSK); 3875 rxon->flags |= RXON_FLG_CHANNEL_MODE_MIXED; 3876 break; 3877 case IEEE80211_HT_PARAM_CHA_SEC_BELOW: 3878 rxon->flags |= RXON_FLG_CTRL_CHANNEL_LOC_HI_MSK; 3879 rxon->flags |= RXON_FLG_CHANNEL_MODE_MIXED; 3880 break; 3881 case IEEE80211_HT_PARAM_CHA_SEC_NONE: 3882 default: 3883 /* channel location only valid if in Mixed mode */ 3884 IL_ERR("invalid extension channel offset\n"); 3885 break; 3886 } 3887 } 3888 } else { 3889 rxon->flags |= RXON_FLG_CHANNEL_MODE_LEGACY; 3890 } 3891 3892 if (il->ops->set_rxon_chain) 3893 il->ops->set_rxon_chain(il); 3894 3895 D_ASSOC("rxon flags 0x%X operation mode :0x%X " 3896 "extension channel offset 0x%x\n", le32_to_cpu(rxon->flags), 3897 il->ht.protection, il->ht.extension_chan_offset); 3898 } 3899 3900 void 3901 il_set_rxon_ht(struct il_priv *il, struct il_ht_config *ht_conf) 3902 { 3903 _il_set_rxon_ht(il, ht_conf); 3904 } 3905 EXPORT_SYMBOL(il_set_rxon_ht); 3906 3907 /* Return valid, unused, channel for a passive scan to reset the RF */ 3908 u8 3909 il_get_single_channel_number(struct il_priv *il, enum nl80211_band band) 3910 { 3911 const struct il_channel_info *ch_info; 3912 int i; 3913 u8 channel = 0; 3914 u8 min, max; 3915 3916 if (band == NL80211_BAND_5GHZ) { 3917 min = 14; 3918 max = il->channel_count; 3919 } else { 3920 min = 0; 3921 max = 14; 3922 } 3923 3924 for (i = min; i < max; i++) { 3925 channel = il->channel_info[i].channel; 3926 if (channel == le16_to_cpu(il->staging.channel)) 3927 continue; 3928 3929 ch_info = il_get_channel_info(il, band, channel); 3930 if (il_is_channel_valid(ch_info)) 3931 break; 3932 } 3933 3934 return channel; 3935 } 3936 EXPORT_SYMBOL(il_get_single_channel_number); 3937 3938 /* 3939 * il_set_rxon_channel - Set the band and channel values in staging RXON 3940 * @ch: requested channel as a pointer to struct ieee80211_channel 3941 3942 * NOTE: Does not commit to the hardware; it sets appropriate bit fields 3943 * in the staging RXON flag structure based on the ch->band 3944 */ 3945 int 3946 il_set_rxon_channel(struct il_priv *il, struct ieee80211_channel *ch) 3947 { 3948 enum nl80211_band band = ch->band; 3949 u16 channel = ch->hw_value; 3950 3951 if (le16_to_cpu(il->staging.channel) == channel && il->band == band) 3952 return 0; 3953 3954 il->staging.channel = cpu_to_le16(channel); 3955 if (band == NL80211_BAND_5GHZ) 3956 il->staging.flags &= ~RXON_FLG_BAND_24G_MSK; 3957 else 3958 il->staging.flags |= RXON_FLG_BAND_24G_MSK; 3959 3960 il->band = band; 3961 3962 D_INFO("Staging channel set to %d [%d]\n", channel, band); 3963 3964 return 0; 3965 } 3966 EXPORT_SYMBOL(il_set_rxon_channel); 3967 3968 void 3969 il_set_flags_for_band(struct il_priv *il, enum nl80211_band band, 3970 struct ieee80211_vif *vif) 3971 { 3972 if (band == NL80211_BAND_5GHZ) { 3973 il->staging.flags &= 3974 ~(RXON_FLG_BAND_24G_MSK | RXON_FLG_AUTO_DETECT_MSK | 3975 RXON_FLG_CCK_MSK); 3976 il->staging.flags |= RXON_FLG_SHORT_SLOT_MSK; 3977 } else { 3978 /* Copied from il_post_associate() */ 3979 if (vif && vif->bss_conf.use_short_slot) 3980 il->staging.flags |= RXON_FLG_SHORT_SLOT_MSK; 3981 else 3982 il->staging.flags &= ~RXON_FLG_SHORT_SLOT_MSK; 3983 3984 il->staging.flags |= RXON_FLG_BAND_24G_MSK; 3985 il->staging.flags |= RXON_FLG_AUTO_DETECT_MSK; 3986 il->staging.flags &= ~RXON_FLG_CCK_MSK; 3987 } 3988 } 3989 EXPORT_SYMBOL(il_set_flags_for_band); 3990 3991 /* 3992 * initialize rxon structure with default values from eeprom 3993 */ 3994 void 3995 il_connection_init_rx_config(struct il_priv *il) 3996 { 3997 const struct il_channel_info *ch_info; 3998 3999 memset(&il->staging, 0, sizeof(il->staging)); 4000 4001 switch (il->iw_mode) { 4002 case NL80211_IFTYPE_UNSPECIFIED: 4003 il->staging.dev_type = RXON_DEV_TYPE_ESS; 4004 break; 4005 case NL80211_IFTYPE_STATION: 4006 il->staging.dev_type = RXON_DEV_TYPE_ESS; 4007 il->staging.filter_flags = RXON_FILTER_ACCEPT_GRP_MSK; 4008 break; 4009 case NL80211_IFTYPE_ADHOC: 4010 il->staging.dev_type = RXON_DEV_TYPE_IBSS; 4011 il->staging.flags = RXON_FLG_SHORT_PREAMBLE_MSK; 4012 il->staging.filter_flags = 4013 RXON_FILTER_BCON_AWARE_MSK | RXON_FILTER_ACCEPT_GRP_MSK; 4014 break; 4015 default: 4016 IL_ERR("Unsupported interface type %d\n", il->vif->type); 4017 return; 4018 } 4019 4020 #if 0 4021 /* TODO: Figure out when short_preamble would be set and cache from 4022 * that */ 4023 if (!hw_to_local(il->hw)->short_preamble) 4024 il->staging.flags &= ~RXON_FLG_SHORT_PREAMBLE_MSK; 4025 else 4026 il->staging.flags |= RXON_FLG_SHORT_PREAMBLE_MSK; 4027 #endif 4028 4029 ch_info = 4030 il_get_channel_info(il, il->band, le16_to_cpu(il->active.channel)); 4031 4032 if (!ch_info) 4033 ch_info = &il->channel_info[0]; 4034 4035 il->staging.channel = cpu_to_le16(ch_info->channel); 4036 il->band = ch_info->band; 4037 4038 il_set_flags_for_band(il, il->band, il->vif); 4039 4040 il->staging.ofdm_basic_rates = 4041 (IL_OFDM_RATES_MASK >> IL_FIRST_OFDM_RATE) & 0xFF; 4042 il->staging.cck_basic_rates = 4043 (IL_CCK_RATES_MASK >> IL_FIRST_CCK_RATE) & 0xF; 4044 4045 /* clear both MIX and PURE40 mode flag */ 4046 il->staging.flags &= 4047 ~(RXON_FLG_CHANNEL_MODE_MIXED | RXON_FLG_CHANNEL_MODE_PURE_40); 4048 if (il->vif) 4049 memcpy(il->staging.node_addr, il->vif->addr, ETH_ALEN); 4050 4051 il->staging.ofdm_ht_single_stream_basic_rates = 0xff; 4052 il->staging.ofdm_ht_dual_stream_basic_rates = 0xff; 4053 } 4054 EXPORT_SYMBOL(il_connection_init_rx_config); 4055 4056 void 4057 il_set_rate(struct il_priv *il) 4058 { 4059 const struct ieee80211_supported_band *hw = NULL; 4060 struct ieee80211_rate *rate; 4061 int i; 4062 4063 hw = il_get_hw_mode(il, il->band); 4064 if (!hw) { 4065 IL_ERR("Failed to set rate: unable to get hw mode\n"); 4066 return; 4067 } 4068 4069 il->active_rate = 0; 4070 4071 for (i = 0; i < hw->n_bitrates; i++) { 4072 rate = &(hw->bitrates[i]); 4073 if (rate->hw_value < RATE_COUNT_LEGACY) 4074 il->active_rate |= (1 << rate->hw_value); 4075 } 4076 4077 D_RATE("Set active_rate = %0x\n", il->active_rate); 4078 4079 il->staging.cck_basic_rates = 4080 (IL_CCK_BASIC_RATES_MASK >> IL_FIRST_CCK_RATE) & 0xF; 4081 4082 il->staging.ofdm_basic_rates = 4083 (IL_OFDM_BASIC_RATES_MASK >> IL_FIRST_OFDM_RATE) & 0xFF; 4084 } 4085 EXPORT_SYMBOL(il_set_rate); 4086 4087 void 4088 il_chswitch_done(struct il_priv *il, bool is_success) 4089 { 4090 if (test_bit(S_EXIT_PENDING, &il->status)) 4091 return; 4092 4093 if (test_and_clear_bit(S_CHANNEL_SWITCH_PENDING, &il->status)) 4094 ieee80211_chswitch_done(il->vif, is_success, 0); 4095 } 4096 EXPORT_SYMBOL(il_chswitch_done); 4097 4098 void 4099 il_hdl_csa(struct il_priv *il, struct il_rx_buf *rxb) 4100 { 4101 struct il_rx_pkt *pkt = rxb_addr(rxb); 4102 struct il_csa_notification *csa = &(pkt->u.csa_notif); 4103 struct il_rxon_cmd *rxon = (void *)&il->active; 4104 4105 if (!test_bit(S_CHANNEL_SWITCH_PENDING, &il->status)) 4106 return; 4107 4108 if (!le32_to_cpu(csa->status) && csa->channel == il->switch_channel) { 4109 rxon->channel = csa->channel; 4110 il->staging.channel = csa->channel; 4111 D_11H("CSA notif: channel %d\n", le16_to_cpu(csa->channel)); 4112 il_chswitch_done(il, true); 4113 } else { 4114 IL_ERR("CSA notif (fail) : channel %d\n", 4115 le16_to_cpu(csa->channel)); 4116 il_chswitch_done(il, false); 4117 } 4118 } 4119 EXPORT_SYMBOL(il_hdl_csa); 4120 4121 #ifdef CONFIG_IWLEGACY_DEBUG 4122 void 4123 il_print_rx_config_cmd(struct il_priv *il) 4124 { 4125 struct il_rxon_cmd *rxon = &il->staging; 4126 4127 D_RADIO("RX CONFIG:\n"); 4128 il_print_hex_dump(il, IL_DL_RADIO, (u8 *) rxon, sizeof(*rxon)); 4129 D_RADIO("u16 channel: 0x%x\n", le16_to_cpu(rxon->channel)); 4130 D_RADIO("u32 flags: 0x%08X\n", le32_to_cpu(rxon->flags)); 4131 D_RADIO("u32 filter_flags: 0x%08x\n", le32_to_cpu(rxon->filter_flags)); 4132 D_RADIO("u8 dev_type: 0x%x\n", rxon->dev_type); 4133 D_RADIO("u8 ofdm_basic_rates: 0x%02x\n", rxon->ofdm_basic_rates); 4134 D_RADIO("u8 cck_basic_rates: 0x%02x\n", rxon->cck_basic_rates); 4135 D_RADIO("u8[6] node_addr: %pM\n", rxon->node_addr); 4136 D_RADIO("u8[6] bssid_addr: %pM\n", rxon->bssid_addr); 4137 D_RADIO("u16 assoc_id: 0x%x\n", le16_to_cpu(rxon->assoc_id)); 4138 } 4139 EXPORT_SYMBOL(il_print_rx_config_cmd); 4140 #endif 4141 /* 4142 * il_irq_handle_error - called for HW or SW error interrupt from card 4143 */ 4144 void 4145 il_irq_handle_error(struct il_priv *il) 4146 { 4147 /* Set the FW error flag -- cleared on il_down */ 4148 set_bit(S_FW_ERROR, &il->status); 4149 4150 /* Cancel currently queued command. */ 4151 clear_bit(S_HCMD_ACTIVE, &il->status); 4152 4153 IL_ERR("Loaded firmware version: %s\n", il->hw->wiphy->fw_version); 4154 4155 il->ops->dump_nic_error_log(il); 4156 if (il->ops->dump_fh) 4157 il->ops->dump_fh(il, NULL, false); 4158 #ifdef CONFIG_IWLEGACY_DEBUG 4159 if (il_get_debug_level(il) & IL_DL_FW_ERRORS) 4160 il_print_rx_config_cmd(il); 4161 #endif 4162 4163 wake_up(&il->wait_command_queue); 4164 4165 /* Keep the restart process from trying to send host 4166 * commands by clearing the INIT status bit */ 4167 clear_bit(S_READY, &il->status); 4168 4169 if (!test_bit(S_EXIT_PENDING, &il->status)) { 4170 IL_DBG(IL_DL_FW_ERRORS, 4171 "Restarting adapter due to uCode error.\n"); 4172 4173 if (il->cfg->mod_params->restart_fw) 4174 queue_work(il->workqueue, &il->restart); 4175 } 4176 } 4177 EXPORT_SYMBOL(il_irq_handle_error); 4178 4179 static int 4180 _il_apm_stop_master(struct il_priv *il) 4181 { 4182 int ret = 0; 4183 4184 /* stop device's busmaster DMA activity */ 4185 _il_set_bit(il, CSR_RESET, CSR_RESET_REG_FLAG_STOP_MASTER); 4186 4187 ret = 4188 _il_poll_bit(il, CSR_RESET, CSR_RESET_REG_FLAG_MASTER_DISABLED, 4189 CSR_RESET_REG_FLAG_MASTER_DISABLED, 100); 4190 if (ret < 0) 4191 IL_WARN("Master Disable Timed Out, 100 usec\n"); 4192 4193 D_INFO("stop master\n"); 4194 4195 return ret; 4196 } 4197 4198 void 4199 _il_apm_stop(struct il_priv *il) 4200 { 4201 lockdep_assert_held(&il->reg_lock); 4202 4203 D_INFO("Stop card, put in low power state\n"); 4204 4205 /* Stop device's DMA activity */ 4206 _il_apm_stop_master(il); 4207 4208 /* Reset the entire device */ 4209 _il_set_bit(il, CSR_RESET, CSR_RESET_REG_FLAG_SW_RESET); 4210 4211 udelay(10); 4212 4213 /* 4214 * Clear "initialization complete" bit to move adapter from 4215 * D0A* (powered-up Active) --> D0U* (Uninitialized) state. 4216 */ 4217 _il_clear_bit(il, CSR_GP_CNTRL, CSR_GP_CNTRL_REG_FLAG_INIT_DONE); 4218 } 4219 EXPORT_SYMBOL(_il_apm_stop); 4220 4221 void 4222 il_apm_stop(struct il_priv *il) 4223 { 4224 unsigned long flags; 4225 4226 spin_lock_irqsave(&il->reg_lock, flags); 4227 _il_apm_stop(il); 4228 spin_unlock_irqrestore(&il->reg_lock, flags); 4229 } 4230 EXPORT_SYMBOL(il_apm_stop); 4231 4232 /* 4233 * Start up NIC's basic functionality after it has been reset 4234 * (e.g. after platform boot, or shutdown via il_apm_stop()) 4235 * NOTE: This does not load uCode nor start the embedded processor 4236 */ 4237 int 4238 il_apm_init(struct il_priv *il) 4239 { 4240 int ret = 0; 4241 u16 lctl; 4242 4243 D_INFO("Init card's basic functions\n"); 4244 4245 /* 4246 * Use "set_bit" below rather than "write", to preserve any hardware 4247 * bits already set by default after reset. 4248 */ 4249 4250 /* Disable L0S exit timer (platform NMI Work/Around) */ 4251 il_set_bit(il, CSR_GIO_CHICKEN_BITS, 4252 CSR_GIO_CHICKEN_BITS_REG_BIT_DIS_L0S_EXIT_TIMER); 4253 4254 /* 4255 * Disable L0s without affecting L1; 4256 * don't wait for ICH L0s (ICH bug W/A) 4257 */ 4258 il_set_bit(il, CSR_GIO_CHICKEN_BITS, 4259 CSR_GIO_CHICKEN_BITS_REG_BIT_L1A_NO_L0S_RX); 4260 4261 /* Set FH wait threshold to maximum (HW error during stress W/A) */ 4262 il_set_bit(il, CSR_DBG_HPET_MEM_REG, CSR_DBG_HPET_MEM_REG_VAL); 4263 4264 /* 4265 * Enable HAP INTA (interrupt from management bus) to 4266 * wake device's PCI Express link L1a -> L0s 4267 * NOTE: This is no-op for 3945 (non-existent bit) 4268 */ 4269 il_set_bit(il, CSR_HW_IF_CONFIG_REG, 4270 CSR_HW_IF_CONFIG_REG_BIT_HAP_WAKE_L1A); 4271 4272 /* 4273 * HW bug W/A for instability in PCIe bus L0->L0S->L1 transition. 4274 * Check if BIOS (or OS) enabled L1-ASPM on this device. 4275 * If so (likely), disable L0S, so device moves directly L0->L1; 4276 * costs negligible amount of power savings. 4277 * If not (unlikely), enable L0S, so there is at least some 4278 * power savings, even without L1. 4279 */ 4280 if (il->cfg->set_l0s) { 4281 ret = pcie_capability_read_word(il->pci_dev, PCI_EXP_LNKCTL, &lctl); 4282 if (!ret && (lctl & PCI_EXP_LNKCTL_ASPM_L1)) { 4283 /* L1-ASPM enabled; disable(!) L0S */ 4284 il_set_bit(il, CSR_GIO_REG, 4285 CSR_GIO_REG_VAL_L0S_ENABLED); 4286 D_POWER("L1 Enabled; Disabling L0S\n"); 4287 } else { 4288 /* L1-ASPM disabled; enable(!) L0S */ 4289 il_clear_bit(il, CSR_GIO_REG, 4290 CSR_GIO_REG_VAL_L0S_ENABLED); 4291 D_POWER("L1 Disabled; Enabling L0S\n"); 4292 } 4293 } 4294 4295 /* Configure analog phase-lock-loop before activating to D0A */ 4296 if (il->cfg->pll_cfg_val) 4297 il_set_bit(il, CSR_ANA_PLL_CFG, 4298 il->cfg->pll_cfg_val); 4299 4300 /* 4301 * Set "initialization complete" bit to move adapter from 4302 * D0U* --> D0A* (powered-up active) state. 4303 */ 4304 il_set_bit(il, CSR_GP_CNTRL, CSR_GP_CNTRL_REG_FLAG_INIT_DONE); 4305 4306 /* 4307 * Wait for clock stabilization; once stabilized, access to 4308 * device-internal resources is supported, e.g. il_wr_prph() 4309 * and accesses to uCode SRAM. 4310 */ 4311 ret = 4312 _il_poll_bit(il, CSR_GP_CNTRL, 4313 CSR_GP_CNTRL_REG_FLAG_MAC_CLOCK_READY, 4314 CSR_GP_CNTRL_REG_FLAG_MAC_CLOCK_READY, 25000); 4315 if (ret < 0) { 4316 D_INFO("Failed to init the card\n"); 4317 goto out; 4318 } 4319 4320 /* 4321 * Enable DMA and BSM (if used) clocks, wait for them to stabilize. 4322 * BSM (Boostrap State Machine) is only in 3945 and 4965. 4323 * 4324 * Write to "CLK_EN_REG"; "1" bits enable clocks, while "0" bits 4325 * do not disable clocks. This preserves any hardware bits already 4326 * set by default in "CLK_CTRL_REG" after reset. 4327 */ 4328 if (il->cfg->use_bsm) 4329 il_wr_prph(il, APMG_CLK_EN_REG, 4330 APMG_CLK_VAL_DMA_CLK_RQT | APMG_CLK_VAL_BSM_CLK_RQT); 4331 else 4332 il_wr_prph(il, APMG_CLK_EN_REG, APMG_CLK_VAL_DMA_CLK_RQT); 4333 udelay(20); 4334 4335 /* Disable L1-Active */ 4336 il_set_bits_prph(il, APMG_PCIDEV_STT_REG, 4337 APMG_PCIDEV_STT_VAL_L1_ACT_DIS); 4338 4339 out: 4340 return ret; 4341 } 4342 EXPORT_SYMBOL(il_apm_init); 4343 4344 int 4345 il_set_tx_power(struct il_priv *il, s8 tx_power, bool force) 4346 { 4347 int ret; 4348 s8 prev_tx_power; 4349 bool defer; 4350 4351 lockdep_assert_held(&il->mutex); 4352 4353 if (il->tx_power_user_lmt == tx_power && !force) 4354 return 0; 4355 4356 if (!il->ops->send_tx_power) 4357 return -EOPNOTSUPP; 4358 4359 /* 0 dBm mean 1 milliwatt */ 4360 if (tx_power < 0) { 4361 IL_WARN("Requested user TXPOWER %d below 1 mW.\n", tx_power); 4362 return -EINVAL; 4363 } 4364 4365 if (tx_power > il->tx_power_device_lmt) { 4366 IL_WARN("Requested user TXPOWER %d above upper limit %d.\n", 4367 tx_power, il->tx_power_device_lmt); 4368 return -EINVAL; 4369 } 4370 4371 if (!il_is_ready_rf(il)) 4372 return -EIO; 4373 4374 /* scan complete and commit_rxon use tx_power_next value, 4375 * it always need to be updated for newest request */ 4376 il->tx_power_next = tx_power; 4377 4378 /* do not set tx power when scanning or channel changing */ 4379 defer = test_bit(S_SCANNING, &il->status) || 4380 memcmp(&il->active, &il->staging, sizeof(il->staging)); 4381 if (defer && !force) { 4382 D_INFO("Deferring tx power set\n"); 4383 return 0; 4384 } 4385 4386 prev_tx_power = il->tx_power_user_lmt; 4387 il->tx_power_user_lmt = tx_power; 4388 4389 ret = il->ops->send_tx_power(il); 4390 4391 /* if fail to set tx_power, restore the orig. tx power */ 4392 if (ret) { 4393 il->tx_power_user_lmt = prev_tx_power; 4394 il->tx_power_next = prev_tx_power; 4395 } 4396 return ret; 4397 } 4398 EXPORT_SYMBOL(il_set_tx_power); 4399 4400 void 4401 il_send_bt_config(struct il_priv *il) 4402 { 4403 struct il_bt_cmd bt_cmd = { 4404 .lead_time = BT_LEAD_TIME_DEF, 4405 .max_kill = BT_MAX_KILL_DEF, 4406 .kill_ack_mask = 0, 4407 .kill_cts_mask = 0, 4408 }; 4409 4410 if (!bt_coex_active) 4411 bt_cmd.flags = BT_COEX_DISABLE; 4412 else 4413 bt_cmd.flags = BT_COEX_ENABLE; 4414 4415 D_INFO("BT coex %s\n", 4416 (bt_cmd.flags == BT_COEX_DISABLE) ? "disable" : "active"); 4417 4418 if (il_send_cmd_pdu(il, C_BT_CONFIG, sizeof(struct il_bt_cmd), &bt_cmd)) 4419 IL_ERR("failed to send BT Coex Config\n"); 4420 } 4421 EXPORT_SYMBOL(il_send_bt_config); 4422 4423 int 4424 il_send_stats_request(struct il_priv *il, u8 flags, bool clear) 4425 { 4426 struct il_stats_cmd stats_cmd = { 4427 .configuration_flags = clear ? IL_STATS_CONF_CLEAR_STATS : 0, 4428 }; 4429 4430 if (flags & CMD_ASYNC) 4431 return il_send_cmd_pdu_async(il, C_STATS, sizeof(struct il_stats_cmd), 4432 &stats_cmd, NULL); 4433 else 4434 return il_send_cmd_pdu(il, C_STATS, sizeof(struct il_stats_cmd), 4435 &stats_cmd); 4436 } 4437 EXPORT_SYMBOL(il_send_stats_request); 4438 4439 void 4440 il_hdl_pm_sleep(struct il_priv *il, struct il_rx_buf *rxb) 4441 { 4442 #ifdef CONFIG_IWLEGACY_DEBUG 4443 struct il_rx_pkt *pkt = rxb_addr(rxb); 4444 struct il_sleep_notification *sleep = &(pkt->u.sleep_notif); 4445 D_RX("sleep mode: %d, src: %d\n", 4446 sleep->pm_sleep_mode, sleep->pm_wakeup_src); 4447 #endif 4448 } 4449 EXPORT_SYMBOL(il_hdl_pm_sleep); 4450 4451 void 4452 il_hdl_pm_debug_stats(struct il_priv *il, struct il_rx_buf *rxb) 4453 { 4454 struct il_rx_pkt *pkt = rxb_addr(rxb); 4455 u32 len = le32_to_cpu(pkt->len_n_flags) & IL_RX_FRAME_SIZE_MSK; 4456 D_RADIO("Dumping %d bytes of unhandled notification for %s:\n", len, 4457 il_get_cmd_string(pkt->hdr.cmd)); 4458 il_print_hex_dump(il, IL_DL_RADIO, pkt->u.raw, len); 4459 } 4460 EXPORT_SYMBOL(il_hdl_pm_debug_stats); 4461 4462 void 4463 il_hdl_error(struct il_priv *il, struct il_rx_buf *rxb) 4464 { 4465 struct il_rx_pkt *pkt = rxb_addr(rxb); 4466 4467 IL_ERR("Error Reply type 0x%08X cmd %s (0x%02X) " 4468 "seq 0x%04X ser 0x%08X\n", 4469 le32_to_cpu(pkt->u.err_resp.error_type), 4470 il_get_cmd_string(pkt->u.err_resp.cmd_id), 4471 pkt->u.err_resp.cmd_id, 4472 le16_to_cpu(pkt->u.err_resp.bad_cmd_seq_num), 4473 le32_to_cpu(pkt->u.err_resp.error_info)); 4474 } 4475 EXPORT_SYMBOL(il_hdl_error); 4476 4477 void 4478 il_clear_isr_stats(struct il_priv *il) 4479 { 4480 memset(&il->isr_stats, 0, sizeof(il->isr_stats)); 4481 } 4482 4483 int 4484 il_mac_conf_tx(struct ieee80211_hw *hw, struct ieee80211_vif *vif, 4485 unsigned int link_id, u16 queue, 4486 const struct ieee80211_tx_queue_params *params) 4487 { 4488 struct il_priv *il = hw->priv; 4489 unsigned long flags; 4490 int q; 4491 4492 D_MAC80211("enter\n"); 4493 4494 if (!il_is_ready_rf(il)) { 4495 D_MAC80211("leave - RF not ready\n"); 4496 return -EIO; 4497 } 4498 4499 if (queue >= AC_NUM) { 4500 D_MAC80211("leave - queue >= AC_NUM %d\n", queue); 4501 return 0; 4502 } 4503 4504 q = AC_NUM - 1 - queue; 4505 4506 spin_lock_irqsave(&il->lock, flags); 4507 4508 il->qos_data.def_qos_parm.ac[q].cw_min = 4509 cpu_to_le16(params->cw_min); 4510 il->qos_data.def_qos_parm.ac[q].cw_max = 4511 cpu_to_le16(params->cw_max); 4512 il->qos_data.def_qos_parm.ac[q].aifsn = params->aifs; 4513 il->qos_data.def_qos_parm.ac[q].edca_txop = 4514 cpu_to_le16((params->txop * 32)); 4515 4516 il->qos_data.def_qos_parm.ac[q].reserved1 = 0; 4517 4518 spin_unlock_irqrestore(&il->lock, flags); 4519 4520 D_MAC80211("leave\n"); 4521 return 0; 4522 } 4523 EXPORT_SYMBOL(il_mac_conf_tx); 4524 4525 int 4526 il_mac_tx_last_beacon(struct ieee80211_hw *hw) 4527 { 4528 struct il_priv *il = hw->priv; 4529 int ret; 4530 4531 D_MAC80211("enter\n"); 4532 4533 ret = (il->ibss_manager == IL_IBSS_MANAGER); 4534 4535 D_MAC80211("leave ret %d\n", ret); 4536 return ret; 4537 } 4538 EXPORT_SYMBOL_GPL(il_mac_tx_last_beacon); 4539 4540 static int 4541 il_set_mode(struct il_priv *il) 4542 { 4543 il_connection_init_rx_config(il); 4544 4545 if (il->ops->set_rxon_chain) 4546 il->ops->set_rxon_chain(il); 4547 4548 return il_commit_rxon(il); 4549 } 4550 4551 int 4552 il_mac_add_interface(struct ieee80211_hw *hw, struct ieee80211_vif *vif) 4553 { 4554 struct il_priv *il = hw->priv; 4555 int err; 4556 bool reset; 4557 4558 mutex_lock(&il->mutex); 4559 D_MAC80211("enter: type %d, addr %pM\n", vif->type, vif->addr); 4560 4561 if (!il_is_ready_rf(il)) { 4562 IL_WARN("Try to add interface when device not ready\n"); 4563 err = -EINVAL; 4564 goto out; 4565 } 4566 4567 /* 4568 * We do not support multiple virtual interfaces, but on hardware reset 4569 * we have to add the same interface again. 4570 */ 4571 reset = (il->vif == vif); 4572 if (il->vif && !reset) { 4573 err = -EOPNOTSUPP; 4574 goto out; 4575 } 4576 4577 il->vif = vif; 4578 il->iw_mode = vif->type; 4579 4580 err = il_set_mode(il); 4581 if (err) { 4582 IL_WARN("Fail to set mode %d\n", vif->type); 4583 if (!reset) { 4584 il->vif = NULL; 4585 il->iw_mode = NL80211_IFTYPE_STATION; 4586 } 4587 } 4588 4589 out: 4590 D_MAC80211("leave err %d\n", err); 4591 mutex_unlock(&il->mutex); 4592 4593 return err; 4594 } 4595 EXPORT_SYMBOL(il_mac_add_interface); 4596 4597 static void 4598 il_teardown_interface(struct il_priv *il, struct ieee80211_vif *vif) 4599 { 4600 lockdep_assert_held(&il->mutex); 4601 4602 if (il->scan_vif == vif) { 4603 il_scan_cancel_timeout(il, 200); 4604 il_force_scan_end(il); 4605 } 4606 4607 il_set_mode(il); 4608 } 4609 4610 void 4611 il_mac_remove_interface(struct ieee80211_hw *hw, struct ieee80211_vif *vif) 4612 { 4613 struct il_priv *il = hw->priv; 4614 4615 mutex_lock(&il->mutex); 4616 D_MAC80211("enter: type %d, addr %pM\n", vif->type, vif->addr); 4617 4618 WARN_ON(il->vif != vif); 4619 il->vif = NULL; 4620 il->iw_mode = NL80211_IFTYPE_UNSPECIFIED; 4621 il_teardown_interface(il, vif); 4622 eth_zero_addr(il->bssid); 4623 4624 D_MAC80211("leave\n"); 4625 mutex_unlock(&il->mutex); 4626 } 4627 EXPORT_SYMBOL(il_mac_remove_interface); 4628 4629 int 4630 il_alloc_txq_mem(struct il_priv *il) 4631 { 4632 if (!il->txq) 4633 il->txq = 4634 kcalloc(il->cfg->num_of_queues, 4635 sizeof(struct il_tx_queue), 4636 GFP_KERNEL); 4637 if (!il->txq) { 4638 IL_ERR("Not enough memory for txq\n"); 4639 return -ENOMEM; 4640 } 4641 return 0; 4642 } 4643 EXPORT_SYMBOL(il_alloc_txq_mem); 4644 4645 void 4646 il_free_txq_mem(struct il_priv *il) 4647 { 4648 kfree(il->txq); 4649 il->txq = NULL; 4650 } 4651 EXPORT_SYMBOL(il_free_txq_mem); 4652 4653 int 4654 il_force_reset(struct il_priv *il, bool external) 4655 { 4656 struct il_force_reset *force_reset; 4657 4658 if (test_bit(S_EXIT_PENDING, &il->status)) 4659 return -EINVAL; 4660 4661 force_reset = &il->force_reset; 4662 force_reset->reset_request_count++; 4663 if (!external) { 4664 if (force_reset->last_force_reset_jiffies && 4665 time_after(force_reset->last_force_reset_jiffies + 4666 force_reset->reset_duration, jiffies)) { 4667 D_INFO("force reset rejected\n"); 4668 force_reset->reset_reject_count++; 4669 return -EAGAIN; 4670 } 4671 } 4672 force_reset->reset_success_count++; 4673 force_reset->last_force_reset_jiffies = jiffies; 4674 4675 /* 4676 * if the request is from external(ex: debugfs), 4677 * then always perform the request in regardless the module 4678 * parameter setting 4679 * if the request is from internal (uCode error or driver 4680 * detect failure), then fw_restart module parameter 4681 * need to be check before performing firmware reload 4682 */ 4683 4684 if (!external && !il->cfg->mod_params->restart_fw) { 4685 D_INFO("Cancel firmware reload based on " 4686 "module parameter setting\n"); 4687 return 0; 4688 } 4689 4690 IL_ERR("On demand firmware reload\n"); 4691 4692 /* Set the FW error flag -- cleared on il_down */ 4693 set_bit(S_FW_ERROR, &il->status); 4694 wake_up(&il->wait_command_queue); 4695 /* 4696 * Keep the restart process from trying to send host 4697 * commands by clearing the INIT status bit 4698 */ 4699 clear_bit(S_READY, &il->status); 4700 queue_work(il->workqueue, &il->restart); 4701 4702 return 0; 4703 } 4704 EXPORT_SYMBOL(il_force_reset); 4705 4706 int 4707 il_mac_change_interface(struct ieee80211_hw *hw, struct ieee80211_vif *vif, 4708 enum nl80211_iftype newtype, bool newp2p) 4709 { 4710 struct il_priv *il = hw->priv; 4711 int err; 4712 4713 mutex_lock(&il->mutex); 4714 D_MAC80211("enter: type %d, addr %pM newtype %d newp2p %d\n", 4715 vif->type, vif->addr, newtype, newp2p); 4716 4717 if (newp2p) { 4718 err = -EOPNOTSUPP; 4719 goto out; 4720 } 4721 4722 if (!il->vif || !il_is_ready_rf(il)) { 4723 /* 4724 * Huh? But wait ... this can maybe happen when 4725 * we're in the middle of a firmware restart! 4726 */ 4727 err = -EBUSY; 4728 goto out; 4729 } 4730 4731 /* success */ 4732 vif->type = newtype; 4733 vif->p2p = false; 4734 il->iw_mode = newtype; 4735 il_teardown_interface(il, vif); 4736 err = 0; 4737 4738 out: 4739 D_MAC80211("leave err %d\n", err); 4740 mutex_unlock(&il->mutex); 4741 4742 return err; 4743 } 4744 EXPORT_SYMBOL(il_mac_change_interface); 4745 4746 void il_mac_flush(struct ieee80211_hw *hw, struct ieee80211_vif *vif, 4747 u32 queues, bool drop) 4748 { 4749 struct il_priv *il = hw->priv; 4750 unsigned long timeout = jiffies + msecs_to_jiffies(500); 4751 int i; 4752 4753 mutex_lock(&il->mutex); 4754 D_MAC80211("enter\n"); 4755 4756 if (il->txq == NULL) 4757 goto out; 4758 4759 for (i = 0; i < il->hw_params.max_txq_num; i++) { 4760 struct il_queue *q; 4761 4762 if (i == il->cmd_queue) 4763 continue; 4764 4765 q = &il->txq[i].q; 4766 if (q->read_ptr == q->write_ptr) 4767 continue; 4768 4769 if (time_after(jiffies, timeout)) { 4770 IL_ERR("Failed to flush queue %d\n", q->id); 4771 break; 4772 } 4773 4774 msleep(20); 4775 } 4776 out: 4777 D_MAC80211("leave\n"); 4778 mutex_unlock(&il->mutex); 4779 } 4780 EXPORT_SYMBOL(il_mac_flush); 4781 4782 /* 4783 * On every watchdog tick we check (latest) time stamp. If it does not 4784 * change during timeout period and queue is not empty we reset firmware. 4785 */ 4786 static int 4787 il_check_stuck_queue(struct il_priv *il, int cnt) 4788 { 4789 struct il_tx_queue *txq = &il->txq[cnt]; 4790 struct il_queue *q = &txq->q; 4791 unsigned long timeout; 4792 unsigned long now = jiffies; 4793 int ret; 4794 4795 if (q->read_ptr == q->write_ptr) { 4796 txq->time_stamp = now; 4797 return 0; 4798 } 4799 4800 timeout = 4801 txq->time_stamp + 4802 msecs_to_jiffies(il->cfg->wd_timeout); 4803 4804 if (time_after(now, timeout)) { 4805 IL_ERR("Queue %d stuck for %u ms.\n", q->id, 4806 jiffies_to_msecs(now - txq->time_stamp)); 4807 ret = il_force_reset(il, false); 4808 return (ret == -EAGAIN) ? 0 : 1; 4809 } 4810 4811 return 0; 4812 } 4813 4814 /* 4815 * Making watchdog tick be a quarter of timeout assure we will 4816 * discover the queue hung between timeout and 1.25*timeout 4817 */ 4818 #define IL_WD_TICK(timeout) ((timeout) / 4) 4819 4820 /* 4821 * Watchdog timer callback, we check each tx queue for stuck, if hung 4822 * we reset the firmware. If everything is fine just rearm the timer. 4823 */ 4824 void 4825 il_bg_watchdog(struct timer_list *t) 4826 { 4827 struct il_priv *il = from_timer(il, t, watchdog); 4828 int cnt; 4829 unsigned long timeout; 4830 4831 if (test_bit(S_EXIT_PENDING, &il->status)) 4832 return; 4833 4834 timeout = il->cfg->wd_timeout; 4835 if (timeout == 0) 4836 return; 4837 4838 /* monitor and check for stuck cmd queue */ 4839 if (il_check_stuck_queue(il, il->cmd_queue)) 4840 return; 4841 4842 /* monitor and check for other stuck queues */ 4843 for (cnt = 0; cnt < il->hw_params.max_txq_num; cnt++) { 4844 /* skip as we already checked the command queue */ 4845 if (cnt == il->cmd_queue) 4846 continue; 4847 if (il_check_stuck_queue(il, cnt)) 4848 return; 4849 } 4850 4851 mod_timer(&il->watchdog, 4852 jiffies + msecs_to_jiffies(IL_WD_TICK(timeout))); 4853 } 4854 EXPORT_SYMBOL(il_bg_watchdog); 4855 4856 void 4857 il_setup_watchdog(struct il_priv *il) 4858 { 4859 unsigned int timeout = il->cfg->wd_timeout; 4860 4861 if (timeout) 4862 mod_timer(&il->watchdog, 4863 jiffies + msecs_to_jiffies(IL_WD_TICK(timeout))); 4864 else 4865 del_timer(&il->watchdog); 4866 } 4867 EXPORT_SYMBOL(il_setup_watchdog); 4868 4869 /* 4870 * extended beacon time format 4871 * time in usec will be changed into a 32-bit value in extended:internal format 4872 * the extended part is the beacon counts 4873 * the internal part is the time in usec within one beacon interval 4874 */ 4875 u32 4876 il_usecs_to_beacons(struct il_priv *il, u32 usec, u32 beacon_interval) 4877 { 4878 u32 quot; 4879 u32 rem; 4880 u32 interval = beacon_interval * TIME_UNIT; 4881 4882 if (!interval || !usec) 4883 return 0; 4884 4885 quot = 4886 (usec / 4887 interval) & (il_beacon_time_mask_high(il, 4888 il->hw_params. 4889 beacon_time_tsf_bits) >> il-> 4890 hw_params.beacon_time_tsf_bits); 4891 rem = 4892 (usec % interval) & il_beacon_time_mask_low(il, 4893 il->hw_params. 4894 beacon_time_tsf_bits); 4895 4896 return (quot << il->hw_params.beacon_time_tsf_bits) + rem; 4897 } 4898 EXPORT_SYMBOL(il_usecs_to_beacons); 4899 4900 /* base is usually what we get from ucode with each received frame, 4901 * the same as HW timer counter counting down 4902 */ 4903 __le32 4904 il_add_beacon_time(struct il_priv *il, u32 base, u32 addon, 4905 u32 beacon_interval) 4906 { 4907 u32 base_low = base & il_beacon_time_mask_low(il, 4908 il->hw_params. 4909 beacon_time_tsf_bits); 4910 u32 addon_low = addon & il_beacon_time_mask_low(il, 4911 il->hw_params. 4912 beacon_time_tsf_bits); 4913 u32 interval = beacon_interval * TIME_UNIT; 4914 u32 res = (base & il_beacon_time_mask_high(il, 4915 il->hw_params. 4916 beacon_time_tsf_bits)) + 4917 (addon & il_beacon_time_mask_high(il, 4918 il->hw_params. 4919 beacon_time_tsf_bits)); 4920 4921 if (base_low > addon_low) 4922 res += base_low - addon_low; 4923 else if (base_low < addon_low) { 4924 res += interval + base_low - addon_low; 4925 res += (1 << il->hw_params.beacon_time_tsf_bits); 4926 } else 4927 res += (1 << il->hw_params.beacon_time_tsf_bits); 4928 4929 return cpu_to_le32(res); 4930 } 4931 EXPORT_SYMBOL(il_add_beacon_time); 4932 4933 #ifdef CONFIG_PM_SLEEP 4934 4935 static int 4936 il_pci_suspend(struct device *device) 4937 { 4938 struct il_priv *il = dev_get_drvdata(device); 4939 4940 /* 4941 * This function is called when system goes into suspend state 4942 * mac80211 will call il_mac_stop() from the mac80211 suspend function 4943 * first but since il_mac_stop() has no knowledge of who the caller is, 4944 * it will not call apm_ops.stop() to stop the DMA operation. 4945 * Calling apm_ops.stop here to make sure we stop the DMA. 4946 */ 4947 il_apm_stop(il); 4948 4949 return 0; 4950 } 4951 4952 static int 4953 il_pci_resume(struct device *device) 4954 { 4955 struct pci_dev *pdev = to_pci_dev(device); 4956 struct il_priv *il = pci_get_drvdata(pdev); 4957 bool hw_rfkill = false; 4958 4959 /* 4960 * We disable the RETRY_TIMEOUT register (0x41) to keep 4961 * PCI Tx retries from interfering with C3 CPU state. 4962 */ 4963 pci_write_config_byte(pdev, PCI_CFG_RETRY_TIMEOUT, 0x00); 4964 4965 il_enable_interrupts(il); 4966 4967 if (!(_il_rd(il, CSR_GP_CNTRL) & CSR_GP_CNTRL_REG_FLAG_HW_RF_KILL_SW)) 4968 hw_rfkill = true; 4969 4970 if (hw_rfkill) 4971 set_bit(S_RFKILL, &il->status); 4972 else 4973 clear_bit(S_RFKILL, &il->status); 4974 4975 wiphy_rfkill_set_hw_state(il->hw->wiphy, hw_rfkill); 4976 4977 return 0; 4978 } 4979 4980 SIMPLE_DEV_PM_OPS(il_pm_ops, il_pci_suspend, il_pci_resume); 4981 EXPORT_SYMBOL(il_pm_ops); 4982 4983 #endif /* CONFIG_PM_SLEEP */ 4984 4985 static void 4986 il_update_qos(struct il_priv *il) 4987 { 4988 if (test_bit(S_EXIT_PENDING, &il->status)) 4989 return; 4990 4991 il->qos_data.def_qos_parm.qos_flags = 0; 4992 4993 if (il->qos_data.qos_active) 4994 il->qos_data.def_qos_parm.qos_flags |= 4995 QOS_PARAM_FLG_UPDATE_EDCA_MSK; 4996 4997 if (il->ht.enabled) 4998 il->qos_data.def_qos_parm.qos_flags |= QOS_PARAM_FLG_TGN_MSK; 4999 5000 D_QOS("send QoS cmd with Qos active=%d FLAGS=0x%X\n", 5001 il->qos_data.qos_active, il->qos_data.def_qos_parm.qos_flags); 5002 5003 il_send_cmd_pdu_async(il, C_QOS_PARAM, sizeof(struct il_qosparam_cmd), 5004 &il->qos_data.def_qos_parm, NULL); 5005 } 5006 5007 /* 5008 * il_mac_config - mac80211 config callback 5009 */ 5010 int 5011 il_mac_config(struct ieee80211_hw *hw, u32 changed) 5012 { 5013 struct il_priv *il = hw->priv; 5014 const struct il_channel_info *ch_info; 5015 struct ieee80211_conf *conf = &hw->conf; 5016 struct ieee80211_channel *channel = conf->chandef.chan; 5017 struct il_ht_config *ht_conf = &il->current_ht_config; 5018 unsigned long flags = 0; 5019 int ret = 0; 5020 u16 ch; 5021 int scan_active = 0; 5022 bool ht_changed = false; 5023 5024 mutex_lock(&il->mutex); 5025 D_MAC80211("enter: channel %d changed 0x%X\n", channel->hw_value, 5026 changed); 5027 5028 if (unlikely(test_bit(S_SCANNING, &il->status))) { 5029 scan_active = 1; 5030 D_MAC80211("scan active\n"); 5031 } 5032 5033 if (changed & 5034 (IEEE80211_CONF_CHANGE_SMPS | IEEE80211_CONF_CHANGE_CHANNEL)) { 5035 /* mac80211 uses static for non-HT which is what we want */ 5036 il->current_ht_config.smps = conf->smps_mode; 5037 5038 /* 5039 * Recalculate chain counts. 5040 * 5041 * If monitor mode is enabled then mac80211 will 5042 * set up the SM PS mode to OFF if an HT channel is 5043 * configured. 5044 */ 5045 if (il->ops->set_rxon_chain) 5046 il->ops->set_rxon_chain(il); 5047 } 5048 5049 /* during scanning mac80211 will delay channel setting until 5050 * scan finish with changed = 0 5051 */ 5052 if (!changed || (changed & IEEE80211_CONF_CHANGE_CHANNEL)) { 5053 5054 if (scan_active) 5055 goto set_ch_out; 5056 5057 ch = channel->hw_value; 5058 ch_info = il_get_channel_info(il, channel->band, ch); 5059 if (!il_is_channel_valid(ch_info)) { 5060 D_MAC80211("leave - invalid channel\n"); 5061 ret = -EINVAL; 5062 goto set_ch_out; 5063 } 5064 5065 if (il->iw_mode == NL80211_IFTYPE_ADHOC && 5066 !il_is_channel_ibss(ch_info)) { 5067 D_MAC80211("leave - not IBSS channel\n"); 5068 ret = -EINVAL; 5069 goto set_ch_out; 5070 } 5071 5072 spin_lock_irqsave(&il->lock, flags); 5073 5074 /* Configure HT40 channels */ 5075 if (il->ht.enabled != conf_is_ht(conf)) { 5076 il->ht.enabled = conf_is_ht(conf); 5077 ht_changed = true; 5078 } 5079 if (il->ht.enabled) { 5080 if (conf_is_ht40_minus(conf)) { 5081 il->ht.extension_chan_offset = 5082 IEEE80211_HT_PARAM_CHA_SEC_BELOW; 5083 il->ht.is_40mhz = true; 5084 } else if (conf_is_ht40_plus(conf)) { 5085 il->ht.extension_chan_offset = 5086 IEEE80211_HT_PARAM_CHA_SEC_ABOVE; 5087 il->ht.is_40mhz = true; 5088 } else { 5089 il->ht.extension_chan_offset = 5090 IEEE80211_HT_PARAM_CHA_SEC_NONE; 5091 il->ht.is_40mhz = false; 5092 } 5093 } else 5094 il->ht.is_40mhz = false; 5095 5096 /* 5097 * Default to no protection. Protection mode will 5098 * later be set from BSS config in il_ht_conf 5099 */ 5100 il->ht.protection = IEEE80211_HT_OP_MODE_PROTECTION_NONE; 5101 5102 /* if we are switching from ht to 2.4 clear flags 5103 * from any ht related info since 2.4 does not 5104 * support ht */ 5105 if ((le16_to_cpu(il->staging.channel) != ch)) 5106 il->staging.flags = 0; 5107 5108 il_set_rxon_channel(il, channel); 5109 il_set_rxon_ht(il, ht_conf); 5110 5111 il_set_flags_for_band(il, channel->band, il->vif); 5112 5113 spin_unlock_irqrestore(&il->lock, flags); 5114 5115 if (il->ops->update_bcast_stations) 5116 ret = il->ops->update_bcast_stations(il); 5117 5118 set_ch_out: 5119 /* The list of supported rates and rate mask can be different 5120 * for each band; since the band may have changed, reset 5121 * the rate mask to what mac80211 lists */ 5122 il_set_rate(il); 5123 } 5124 5125 if (changed & (IEEE80211_CONF_CHANGE_PS | IEEE80211_CONF_CHANGE_IDLE)) { 5126 il->power_data.ps_disabled = !(conf->flags & IEEE80211_CONF_PS); 5127 if (!il->power_data.ps_disabled) 5128 IL_WARN_ONCE("Enabling power save might cause firmware crashes\n"); 5129 ret = il_power_update_mode(il, false); 5130 if (ret) 5131 D_MAC80211("Error setting sleep level\n"); 5132 } 5133 5134 if (changed & IEEE80211_CONF_CHANGE_POWER) { 5135 D_MAC80211("TX Power old=%d new=%d\n", il->tx_power_user_lmt, 5136 conf->power_level); 5137 5138 il_set_tx_power(il, conf->power_level, false); 5139 } 5140 5141 if (!il_is_ready(il)) { 5142 D_MAC80211("leave - not ready\n"); 5143 goto out; 5144 } 5145 5146 if (scan_active) 5147 goto out; 5148 5149 if (memcmp(&il->active, &il->staging, sizeof(il->staging))) 5150 il_commit_rxon(il); 5151 else 5152 D_INFO("Not re-sending same RXON configuration.\n"); 5153 if (ht_changed) 5154 il_update_qos(il); 5155 5156 out: 5157 D_MAC80211("leave ret %d\n", ret); 5158 mutex_unlock(&il->mutex); 5159 5160 return ret; 5161 } 5162 EXPORT_SYMBOL(il_mac_config); 5163 5164 void 5165 il_mac_reset_tsf(struct ieee80211_hw *hw, struct ieee80211_vif *vif) 5166 { 5167 struct il_priv *il = hw->priv; 5168 unsigned long flags; 5169 5170 mutex_lock(&il->mutex); 5171 D_MAC80211("enter: type %d, addr %pM\n", vif->type, vif->addr); 5172 5173 spin_lock_irqsave(&il->lock, flags); 5174 5175 memset(&il->current_ht_config, 0, sizeof(struct il_ht_config)); 5176 5177 /* new association get rid of ibss beacon skb */ 5178 dev_consume_skb_irq(il->beacon_skb); 5179 il->beacon_skb = NULL; 5180 il->timestamp = 0; 5181 5182 spin_unlock_irqrestore(&il->lock, flags); 5183 5184 il_scan_cancel_timeout(il, 100); 5185 if (!il_is_ready_rf(il)) { 5186 D_MAC80211("leave - not ready\n"); 5187 mutex_unlock(&il->mutex); 5188 return; 5189 } 5190 5191 /* we are restarting association process */ 5192 il->staging.filter_flags &= ~RXON_FILTER_ASSOC_MSK; 5193 il_commit_rxon(il); 5194 5195 il_set_rate(il); 5196 5197 D_MAC80211("leave\n"); 5198 mutex_unlock(&il->mutex); 5199 } 5200 EXPORT_SYMBOL(il_mac_reset_tsf); 5201 5202 static void 5203 il_ht_conf(struct il_priv *il, struct ieee80211_vif *vif) 5204 { 5205 struct il_ht_config *ht_conf = &il->current_ht_config; 5206 struct ieee80211_sta *sta; 5207 struct ieee80211_bss_conf *bss_conf = &vif->bss_conf; 5208 5209 D_ASSOC("enter:\n"); 5210 5211 if (!il->ht.enabled) 5212 return; 5213 5214 il->ht.protection = 5215 bss_conf->ht_operation_mode & IEEE80211_HT_OP_MODE_PROTECTION; 5216 il->ht.non_gf_sta_present = 5217 !!(bss_conf-> 5218 ht_operation_mode & IEEE80211_HT_OP_MODE_NON_GF_STA_PRSNT); 5219 5220 ht_conf->single_chain_sufficient = false; 5221 5222 switch (vif->type) { 5223 case NL80211_IFTYPE_STATION: 5224 rcu_read_lock(); 5225 sta = ieee80211_find_sta(vif, bss_conf->bssid); 5226 if (sta) { 5227 struct ieee80211_sta_ht_cap *ht_cap = &sta->deflink.ht_cap; 5228 int maxstreams; 5229 5230 maxstreams = 5231 (ht_cap->mcs. 5232 tx_params & IEEE80211_HT_MCS_TX_MAX_STREAMS_MASK) 5233 >> IEEE80211_HT_MCS_TX_MAX_STREAMS_SHIFT; 5234 maxstreams += 1; 5235 5236 if (ht_cap->mcs.rx_mask[1] == 0 && 5237 ht_cap->mcs.rx_mask[2] == 0) 5238 ht_conf->single_chain_sufficient = true; 5239 if (maxstreams <= 1) 5240 ht_conf->single_chain_sufficient = true; 5241 } else { 5242 /* 5243 * If at all, this can only happen through a race 5244 * when the AP disconnects us while we're still 5245 * setting up the connection, in that case mac80211 5246 * will soon tell us about that. 5247 */ 5248 ht_conf->single_chain_sufficient = true; 5249 } 5250 rcu_read_unlock(); 5251 break; 5252 case NL80211_IFTYPE_ADHOC: 5253 ht_conf->single_chain_sufficient = true; 5254 break; 5255 default: 5256 break; 5257 } 5258 5259 D_ASSOC("leave\n"); 5260 } 5261 5262 static inline void 5263 il_set_no_assoc(struct il_priv *il, struct ieee80211_vif *vif) 5264 { 5265 /* 5266 * inform the ucode that there is no longer an 5267 * association and that no more packets should be 5268 * sent 5269 */ 5270 il->staging.filter_flags &= ~RXON_FILTER_ASSOC_MSK; 5271 il->staging.assoc_id = 0; 5272 il_commit_rxon(il); 5273 } 5274 5275 static void 5276 il_beacon_update(struct ieee80211_hw *hw, struct ieee80211_vif *vif) 5277 { 5278 struct il_priv *il = hw->priv; 5279 unsigned long flags; 5280 __le64 timestamp; 5281 struct sk_buff *skb = ieee80211_beacon_get(hw, vif, 0); 5282 5283 if (!skb) 5284 return; 5285 5286 D_MAC80211("enter\n"); 5287 5288 lockdep_assert_held(&il->mutex); 5289 5290 if (!il->beacon_enabled) { 5291 IL_ERR("update beacon with no beaconing enabled\n"); 5292 dev_kfree_skb(skb); 5293 return; 5294 } 5295 5296 spin_lock_irqsave(&il->lock, flags); 5297 dev_consume_skb_irq(il->beacon_skb); 5298 il->beacon_skb = skb; 5299 5300 timestamp = ((struct ieee80211_mgmt *)skb->data)->u.beacon.timestamp; 5301 il->timestamp = le64_to_cpu(timestamp); 5302 5303 D_MAC80211("leave\n"); 5304 spin_unlock_irqrestore(&il->lock, flags); 5305 5306 if (!il_is_ready_rf(il)) { 5307 D_MAC80211("leave - RF not ready\n"); 5308 return; 5309 } 5310 5311 il->ops->post_associate(il); 5312 } 5313 5314 void 5315 il_mac_bss_info_changed(struct ieee80211_hw *hw, struct ieee80211_vif *vif, 5316 struct ieee80211_bss_conf *bss_conf, u64 changes) 5317 { 5318 struct il_priv *il = hw->priv; 5319 int ret; 5320 5321 mutex_lock(&il->mutex); 5322 D_MAC80211("enter: changes 0x%llx\n", changes); 5323 5324 if (!il_is_alive(il)) { 5325 D_MAC80211("leave - not alive\n"); 5326 mutex_unlock(&il->mutex); 5327 return; 5328 } 5329 5330 if (changes & BSS_CHANGED_QOS) { 5331 unsigned long flags; 5332 5333 spin_lock_irqsave(&il->lock, flags); 5334 il->qos_data.qos_active = bss_conf->qos; 5335 il_update_qos(il); 5336 spin_unlock_irqrestore(&il->lock, flags); 5337 } 5338 5339 if (changes & BSS_CHANGED_BEACON_ENABLED) { 5340 /* FIXME: can we remove beacon_enabled ? */ 5341 if (vif->bss_conf.enable_beacon) 5342 il->beacon_enabled = true; 5343 else 5344 il->beacon_enabled = false; 5345 } 5346 5347 if (changes & BSS_CHANGED_BSSID) { 5348 D_MAC80211("BSSID %pM\n", bss_conf->bssid); 5349 5350 /* 5351 * On passive channel we wait with blocked queues to see if 5352 * there is traffic on that channel. If no frame will be 5353 * received (what is very unlikely since scan detects AP on 5354 * that channel, but theoretically possible), mac80211 associate 5355 * procedure will time out and mac80211 will call us with NULL 5356 * bssid. We have to unblock queues on such condition. 5357 */ 5358 if (is_zero_ether_addr(bss_conf->bssid)) 5359 il_wake_queues_by_reason(il, IL_STOP_REASON_PASSIVE); 5360 5361 /* 5362 * If there is currently a HW scan going on in the background, 5363 * then we need to cancel it, otherwise sometimes we are not 5364 * able to authenticate (FIXME: why ?) 5365 */ 5366 if (il_scan_cancel_timeout(il, 100)) { 5367 D_MAC80211("leave - scan abort failed\n"); 5368 mutex_unlock(&il->mutex); 5369 return; 5370 } 5371 5372 /* mac80211 only sets assoc when in STATION mode */ 5373 memcpy(il->staging.bssid_addr, bss_conf->bssid, ETH_ALEN); 5374 5375 /* FIXME: currently needed in a few places */ 5376 memcpy(il->bssid, bss_conf->bssid, ETH_ALEN); 5377 } 5378 5379 /* 5380 * This needs to be after setting the BSSID in case 5381 * mac80211 decides to do both changes at once because 5382 * it will invoke post_associate. 5383 */ 5384 if (vif->type == NL80211_IFTYPE_ADHOC && (changes & BSS_CHANGED_BEACON)) 5385 il_beacon_update(hw, vif); 5386 5387 if (changes & BSS_CHANGED_ERP_PREAMBLE) { 5388 D_MAC80211("ERP_PREAMBLE %d\n", bss_conf->use_short_preamble); 5389 if (bss_conf->use_short_preamble) 5390 il->staging.flags |= RXON_FLG_SHORT_PREAMBLE_MSK; 5391 else 5392 il->staging.flags &= ~RXON_FLG_SHORT_PREAMBLE_MSK; 5393 } 5394 5395 if (changes & BSS_CHANGED_ERP_CTS_PROT) { 5396 D_MAC80211("ERP_CTS %d\n", bss_conf->use_cts_prot); 5397 if (bss_conf->use_cts_prot && il->band != NL80211_BAND_5GHZ) 5398 il->staging.flags |= RXON_FLG_TGG_PROTECT_MSK; 5399 else 5400 il->staging.flags &= ~RXON_FLG_TGG_PROTECT_MSK; 5401 if (bss_conf->use_cts_prot) 5402 il->staging.flags |= RXON_FLG_SELF_CTS_EN; 5403 else 5404 il->staging.flags &= ~RXON_FLG_SELF_CTS_EN; 5405 } 5406 5407 if (changes & BSS_CHANGED_BASIC_RATES) { 5408 /* XXX use this information 5409 * 5410 * To do that, remove code from il_set_rate() and put something 5411 * like this here: 5412 * 5413 if (A-band) 5414 il->staging.ofdm_basic_rates = 5415 bss_conf->basic_rates; 5416 else 5417 il->staging.ofdm_basic_rates = 5418 bss_conf->basic_rates >> 4; 5419 il->staging.cck_basic_rates = 5420 bss_conf->basic_rates & 0xF; 5421 */ 5422 } 5423 5424 if (changes & BSS_CHANGED_HT) { 5425 il_ht_conf(il, vif); 5426 5427 if (il->ops->set_rxon_chain) 5428 il->ops->set_rxon_chain(il); 5429 } 5430 5431 if (changes & BSS_CHANGED_ASSOC) { 5432 D_MAC80211("ASSOC %d\n", vif->cfg.assoc); 5433 if (vif->cfg.assoc) { 5434 il->timestamp = bss_conf->sync_tsf; 5435 5436 if (!il_is_rfkill(il)) 5437 il->ops->post_associate(il); 5438 } else 5439 il_set_no_assoc(il, vif); 5440 } 5441 5442 if (changes && il_is_associated(il) && vif->cfg.aid) { 5443 D_MAC80211("Changes (%#llx) while associated\n", changes); 5444 ret = il_send_rxon_assoc(il); 5445 if (!ret) { 5446 /* Sync active_rxon with latest change. */ 5447 memcpy((void *)&il->active, &il->staging, 5448 sizeof(struct il_rxon_cmd)); 5449 } 5450 } 5451 5452 if (changes & BSS_CHANGED_BEACON_ENABLED) { 5453 if (vif->bss_conf.enable_beacon) { 5454 memcpy(il->staging.bssid_addr, bss_conf->bssid, 5455 ETH_ALEN); 5456 memcpy(il->bssid, bss_conf->bssid, ETH_ALEN); 5457 il->ops->config_ap(il); 5458 } else 5459 il_set_no_assoc(il, vif); 5460 } 5461 5462 if (changes & BSS_CHANGED_IBSS) { 5463 ret = il->ops->manage_ibss_station(il, vif, 5464 vif->cfg.ibss_joined); 5465 if (ret) 5466 IL_ERR("failed to %s IBSS station %pM\n", 5467 vif->cfg.ibss_joined ? "add" : "remove", 5468 bss_conf->bssid); 5469 } 5470 5471 D_MAC80211("leave\n"); 5472 mutex_unlock(&il->mutex); 5473 } 5474 EXPORT_SYMBOL(il_mac_bss_info_changed); 5475 5476 irqreturn_t 5477 il_isr(int irq, void *data) 5478 { 5479 struct il_priv *il = data; 5480 u32 inta, inta_mask; 5481 u32 inta_fh; 5482 unsigned long flags; 5483 if (!il) 5484 return IRQ_NONE; 5485 5486 spin_lock_irqsave(&il->lock, flags); 5487 5488 /* Disable (but don't clear!) interrupts here to avoid 5489 * back-to-back ISRs and sporadic interrupts from our NIC. 5490 * If we have something to service, the tasklet will re-enable ints. 5491 * If we *don't* have something, we'll re-enable before leaving here. */ 5492 inta_mask = _il_rd(il, CSR_INT_MASK); /* just for debug */ 5493 _il_wr(il, CSR_INT_MASK, 0x00000000); 5494 5495 /* Discover which interrupts are active/pending */ 5496 inta = _il_rd(il, CSR_INT); 5497 inta_fh = _il_rd(il, CSR_FH_INT_STATUS); 5498 5499 /* Ignore interrupt if there's nothing in NIC to service. 5500 * This may be due to IRQ shared with another device, 5501 * or due to sporadic interrupts thrown from our NIC. */ 5502 if (!inta && !inta_fh) { 5503 D_ISR("Ignore interrupt, inta == 0, inta_fh == 0\n"); 5504 goto none; 5505 } 5506 5507 if (inta == 0xFFFFFFFF || (inta & 0xFFFFFFF0) == 0xa5a5a5a0) { 5508 /* Hardware disappeared. It might have already raised 5509 * an interrupt */ 5510 IL_WARN("HARDWARE GONE?? INTA == 0x%08x\n", inta); 5511 goto unplugged; 5512 } 5513 5514 D_ISR("ISR inta 0x%08x, enabled 0x%08x, fh 0x%08x\n", inta, inta_mask, 5515 inta_fh); 5516 5517 inta &= ~CSR_INT_BIT_SCD; 5518 5519 /* il_irq_tasklet() will service interrupts and re-enable them */ 5520 if (likely(inta || inta_fh)) 5521 tasklet_schedule(&il->irq_tasklet); 5522 5523 unplugged: 5524 spin_unlock_irqrestore(&il->lock, flags); 5525 return IRQ_HANDLED; 5526 5527 none: 5528 /* re-enable interrupts here since we don't have anything to service. */ 5529 /* only Re-enable if disabled by irq */ 5530 if (test_bit(S_INT_ENABLED, &il->status)) 5531 il_enable_interrupts(il); 5532 spin_unlock_irqrestore(&il->lock, flags); 5533 return IRQ_NONE; 5534 } 5535 EXPORT_SYMBOL(il_isr); 5536 5537 /* 5538 * il_tx_cmd_protection: Set rts/cts. 3945 and 4965 only share this 5539 * function. 5540 */ 5541 void 5542 il_tx_cmd_protection(struct il_priv *il, struct ieee80211_tx_info *info, 5543 __le16 fc, __le32 *tx_flags) 5544 { 5545 if (info->control.rates[0].flags & IEEE80211_TX_RC_USE_RTS_CTS) { 5546 *tx_flags |= TX_CMD_FLG_RTS_MSK; 5547 *tx_flags &= ~TX_CMD_FLG_CTS_MSK; 5548 *tx_flags |= TX_CMD_FLG_FULL_TXOP_PROT_MSK; 5549 5550 if (!ieee80211_is_mgmt(fc)) 5551 return; 5552 5553 switch (fc & cpu_to_le16(IEEE80211_FCTL_STYPE)) { 5554 case cpu_to_le16(IEEE80211_STYPE_AUTH): 5555 case cpu_to_le16(IEEE80211_STYPE_DEAUTH): 5556 case cpu_to_le16(IEEE80211_STYPE_ASSOC_REQ): 5557 case cpu_to_le16(IEEE80211_STYPE_REASSOC_REQ): 5558 *tx_flags &= ~TX_CMD_FLG_RTS_MSK; 5559 *tx_flags |= TX_CMD_FLG_CTS_MSK; 5560 break; 5561 } 5562 } else if (info->control.rates[0]. 5563 flags & IEEE80211_TX_RC_USE_CTS_PROTECT) { 5564 *tx_flags &= ~TX_CMD_FLG_RTS_MSK; 5565 *tx_flags |= TX_CMD_FLG_CTS_MSK; 5566 *tx_flags |= TX_CMD_FLG_FULL_TXOP_PROT_MSK; 5567 } 5568 } 5569 EXPORT_SYMBOL(il_tx_cmd_protection); 5570