1 /****************************************************************************** 2 * 3 * This file is provided under a dual BSD/GPLv2 license. When using or 4 * redistributing this file, you may do so under either license. 5 * 6 * GPL LICENSE SUMMARY 7 * 8 * Copyright(c) 2005 - 2011 Intel Corporation. All rights reserved. 9 * 10 * This program is free software; you can redistribute it and/or modify 11 * it under the terms of version 2 of the GNU General Public License as 12 * published by the Free Software Foundation. 13 * 14 * This program is distributed in the hope that it will be useful, but 15 * WITHOUT ANY WARRANTY; without even the implied warranty of 16 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU 17 * General Public License for more details. 18 * 19 * You should have received a copy of the GNU General Public License 20 * along with this program; if not, write to the Free Software 21 * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110, 22 * USA 23 * 24 * The full GNU General Public License is included in this distribution 25 * in the file called LICENSE.GPL. 26 * 27 * Contact Information: 28 * Intel Linux Wireless <ilw@linux.intel.com> 29 * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 30 * 31 * BSD LICENSE 32 * 33 * Copyright(c) 2005 - 2011 Intel Corporation. All rights reserved. 34 * All rights reserved. 35 * 36 * Redistribution and use in source and binary forms, with or without 37 * modification, are permitted provided that the following conditions 38 * are met: 39 * 40 * * Redistributions of source code must retain the above copyright 41 * notice, this list of conditions and the following disclaimer. 42 * * Redistributions in binary form must reproduce the above copyright 43 * notice, this list of conditions and the following disclaimer in 44 * the documentation and/or other materials provided with the 45 * distribution. 46 * * Neither the name Intel Corporation nor the names of its 47 * contributors may be used to endorse or promote products derived 48 * from this software without specific prior written permission. 49 * 50 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS 51 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT 52 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR 53 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT 54 * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, 55 * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT 56 * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, 57 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY 58 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 59 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE 60 * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 61 * 62 *****************************************************************************/ 63 64 #ifndef __il_commands_h__ 65 #define __il_commands_h__ 66 67 #include <linux/ieee80211.h> 68 69 struct il_priv; 70 71 /* uCode version contains 4 values: Major/Minor/API/Serial */ 72 #define IL_UCODE_MAJOR(ver) (((ver) & 0xFF000000) >> 24) 73 #define IL_UCODE_MINOR(ver) (((ver) & 0x00FF0000) >> 16) 74 #define IL_UCODE_API(ver) (((ver) & 0x0000FF00) >> 8) 75 #define IL_UCODE_SERIAL(ver) ((ver) & 0x000000FF) 76 77 /* Tx rates */ 78 #define IL_CCK_RATES 4 79 #define IL_OFDM_RATES 8 80 #define IL_MAX_RATES (IL_CCK_RATES + IL_OFDM_RATES) 81 82 enum { 83 N_ALIVE = 0x1, 84 N_ERROR = 0x2, 85 86 /* RXON and QOS commands */ 87 C_RXON = 0x10, 88 C_RXON_ASSOC = 0x11, 89 C_QOS_PARAM = 0x13, 90 C_RXON_TIMING = 0x14, 91 92 /* Multi-Station support */ 93 C_ADD_STA = 0x18, 94 C_REM_STA = 0x19, 95 96 /* Security */ 97 C_WEPKEY = 0x20, 98 99 /* RX, TX, LEDs */ 100 N_3945_RX = 0x1b, /* 3945 only */ 101 C_TX = 0x1c, 102 C_RATE_SCALE = 0x47, /* 3945 only */ 103 C_LEDS = 0x48, 104 C_TX_LINK_QUALITY_CMD = 0x4e, /* for 4965 */ 105 106 /* 802.11h related */ 107 C_CHANNEL_SWITCH = 0x72, 108 N_CHANNEL_SWITCH = 0x73, 109 C_SPECTRUM_MEASUREMENT = 0x74, 110 N_SPECTRUM_MEASUREMENT = 0x75, 111 112 /* Power Management */ 113 C_POWER_TBL = 0x77, 114 N_PM_SLEEP = 0x7A, 115 N_PM_DEBUG_STATS = 0x7B, 116 117 /* Scan commands and notifications */ 118 C_SCAN = 0x80, 119 C_SCAN_ABORT = 0x81, 120 N_SCAN_START = 0x82, 121 N_SCAN_RESULTS = 0x83, 122 N_SCAN_COMPLETE = 0x84, 123 124 /* IBSS/AP commands */ 125 N_BEACON = 0x90, 126 C_TX_BEACON = 0x91, 127 128 /* Miscellaneous commands */ 129 C_TX_PWR_TBL = 0x97, 130 131 /* Bluetooth device coexistence config command */ 132 C_BT_CONFIG = 0x9b, 133 134 /* Statistics */ 135 C_STATS = 0x9c, 136 N_STATS = 0x9d, 137 138 /* RF-KILL commands and notifications */ 139 N_CARD_STATE = 0xa1, 140 141 /* Missed beacons notification */ 142 N_MISSED_BEACONS = 0xa2, 143 144 C_CT_KILL_CONFIG = 0xa4, 145 C_SENSITIVITY = 0xa8, 146 C_PHY_CALIBRATION = 0xb0, 147 N_RX_PHY = 0xc0, 148 N_RX_MPDU = 0xc1, 149 N_RX = 0xc3, 150 N_COMPRESSED_BA = 0xc5, 151 152 IL_CN_MAX = 0xff 153 }; 154 155 /****************************************************************************** 156 * (0) 157 * Commonly used structures and definitions: 158 * Command header, rate_n_flags, txpower 159 * 160 *****************************************************************************/ 161 162 /* il_cmd_header flags value */ 163 #define IL_CMD_FAILED_MSK 0x40 164 165 #define SEQ_TO_QUEUE(s) (((s) >> 8) & 0x1f) 166 #define QUEUE_TO_SEQ(q) (((q) & 0x1f) << 8) 167 #define SEQ_TO_IDX(s) ((s) & 0xff) 168 #define IDX_TO_SEQ(i) ((i) & 0xff) 169 #define SEQ_HUGE_FRAME cpu_to_le16(0x4000) 170 #define SEQ_RX_FRAME cpu_to_le16(0x8000) 171 172 /** 173 * struct il_cmd_header 174 * 175 * This header format appears in the beginning of each command sent from the 176 * driver, and each response/notification received from uCode. 177 */ 178 struct il_cmd_header { 179 u8 cmd; /* Command ID: C_RXON, etc. */ 180 u8 flags; /* 0:5 reserved, 6 abort, 7 internal */ 181 /* 182 * The driver sets up the sequence number to values of its choosing. 183 * uCode does not use this value, but passes it back to the driver 184 * when sending the response to each driver-originated command, so 185 * the driver can match the response to the command. Since the values 186 * don't get used by uCode, the driver may set up an arbitrary format. 187 * 188 * There is one exception: uCode sets bit 15 when it originates 189 * the response/notification, i.e. when the response/notification 190 * is not a direct response to a command sent by the driver. For 191 * example, uCode issues N_3945_RX when it sends a received frame 192 * to the driver; it is not a direct response to any driver command. 193 * 194 * The Linux driver uses the following format: 195 * 196 * 0:7 tfd idx - position within TX queue 197 * 8:12 TX queue id 198 * 13 reserved 199 * 14 huge - driver sets this to indicate command is in the 200 * 'huge' storage at the end of the command buffers 201 * 15 unsolicited RX or uCode-originated notification 202 */ 203 __le16 sequence; 204 } __packed; 205 206 /** 207 * struct il3945_tx_power 208 * 209 * Used in C_TX_PWR_TBL, C_SCAN, C_CHANNEL_SWITCH 210 * 211 * Each entry contains two values: 212 * 1) DSP gain (or sometimes called DSP attenuation). This is a fine-grained 213 * linear value that multiplies the output of the digital signal processor, 214 * before being sent to the analog radio. 215 * 2) Radio gain. This sets the analog gain of the radio Tx path. 216 * It is a coarser setting, and behaves in a logarithmic (dB) fashion. 217 * 218 * Driver obtains values from struct il3945_tx_power power_gain_table[][]. 219 */ 220 struct il3945_tx_power { 221 u8 tx_gain; /* gain for analog radio */ 222 u8 dsp_atten; /* gain for DSP */ 223 } __packed; 224 225 /** 226 * struct il3945_power_per_rate 227 * 228 * Used in C_TX_PWR_TBL, C_CHANNEL_SWITCH 229 */ 230 struct il3945_power_per_rate { 231 u8 rate; /* plcp */ 232 struct il3945_tx_power tpc; 233 u8 reserved; 234 } __packed; 235 236 /** 237 * iwl4965 rate_n_flags bit fields 238 * 239 * rate_n_flags format is used in following iwl4965 commands: 240 * N_RX (response only) 241 * N_RX_MPDU (response only) 242 * C_TX (both command and response) 243 * C_TX_LINK_QUALITY_CMD 244 * 245 * High-throughput (HT) rate format for bits 7:0 (bit 8 must be "1"): 246 * 2-0: 0) 6 Mbps 247 * 1) 12 Mbps 248 * 2) 18 Mbps 249 * 3) 24 Mbps 250 * 4) 36 Mbps 251 * 5) 48 Mbps 252 * 6) 54 Mbps 253 * 7) 60 Mbps 254 * 255 * 4-3: 0) Single stream (SISO) 256 * 1) Dual stream (MIMO) 257 * 2) Triple stream (MIMO) 258 * 259 * 5: Value of 0x20 in bits 7:0 indicates 6 Mbps HT40 duplicate data 260 * 261 * Legacy OFDM rate format for bits 7:0 (bit 8 must be "0", bit 9 "0"): 262 * 3-0: 0xD) 6 Mbps 263 * 0xF) 9 Mbps 264 * 0x5) 12 Mbps 265 * 0x7) 18 Mbps 266 * 0x9) 24 Mbps 267 * 0xB) 36 Mbps 268 * 0x1) 48 Mbps 269 * 0x3) 54 Mbps 270 * 271 * Legacy CCK rate format for bits 7:0 (bit 8 must be "0", bit 9 "1"): 272 * 6-0: 10) 1 Mbps 273 * 20) 2 Mbps 274 * 55) 5.5 Mbps 275 * 110) 11 Mbps 276 */ 277 #define RATE_MCS_CODE_MSK 0x7 278 #define RATE_MCS_SPATIAL_POS 3 279 #define RATE_MCS_SPATIAL_MSK 0x18 280 #define RATE_MCS_HT_DUP_POS 5 281 #define RATE_MCS_HT_DUP_MSK 0x20 282 283 /* Bit 8: (1) HT format, (0) legacy format in bits 7:0 */ 284 #define RATE_MCS_FLAGS_POS 8 285 #define RATE_MCS_HT_POS 8 286 #define RATE_MCS_HT_MSK 0x100 287 288 /* Bit 9: (1) CCK, (0) OFDM. HT (bit 8) must be "0" for this bit to be valid */ 289 #define RATE_MCS_CCK_POS 9 290 #define RATE_MCS_CCK_MSK 0x200 291 292 /* Bit 10: (1) Use Green Field preamble */ 293 #define RATE_MCS_GF_POS 10 294 #define RATE_MCS_GF_MSK 0x400 295 296 /* Bit 11: (1) Use 40Mhz HT40 chnl width, (0) use 20 MHz legacy chnl width */ 297 #define RATE_MCS_HT40_POS 11 298 #define RATE_MCS_HT40_MSK 0x800 299 300 /* Bit 12: (1) Duplicate data on both 20MHz chnls. HT40 (bit 11) must be set. */ 301 #define RATE_MCS_DUP_POS 12 302 #define RATE_MCS_DUP_MSK 0x1000 303 304 /* Bit 13: (1) Short guard interval (0.4 usec), (0) normal GI (0.8 usec) */ 305 #define RATE_MCS_SGI_POS 13 306 #define RATE_MCS_SGI_MSK 0x2000 307 308 /** 309 * rate_n_flags Tx antenna masks 310 * 4965 has 2 transmitters 311 * bit14:16 312 */ 313 #define RATE_MCS_ANT_POS 14 314 #define RATE_MCS_ANT_A_MSK 0x04000 315 #define RATE_MCS_ANT_B_MSK 0x08000 316 #define RATE_MCS_ANT_C_MSK 0x10000 317 #define RATE_MCS_ANT_AB_MSK (RATE_MCS_ANT_A_MSK | RATE_MCS_ANT_B_MSK) 318 #define RATE_MCS_ANT_ABC_MSK (RATE_MCS_ANT_AB_MSK | RATE_MCS_ANT_C_MSK) 319 #define RATE_ANT_NUM 3 320 321 #define POWER_TBL_NUM_ENTRIES 33 322 #define POWER_TBL_NUM_HT_OFDM_ENTRIES 32 323 #define POWER_TBL_CCK_ENTRY 32 324 325 #define IL_PWR_NUM_HT_OFDM_ENTRIES 24 326 #define IL_PWR_CCK_ENTRIES 2 327 328 /** 329 * union il4965_tx_power_dual_stream 330 * 331 * Host format used for C_TX_PWR_TBL, C_CHANNEL_SWITCH 332 * Use __le32 version (struct tx_power_dual_stream) when building command. 333 * 334 * Driver provides radio gain and DSP attenuation settings to device in pairs, 335 * one value for each transmitter chain. The first value is for transmitter A, 336 * second for transmitter B. 337 * 338 * For SISO bit rates, both values in a pair should be identical. 339 * For MIMO rates, one value may be different from the other, 340 * in order to balance the Tx output between the two transmitters. 341 * 342 * See more details in doc for TXPOWER in 4965.h. 343 */ 344 union il4965_tx_power_dual_stream { 345 struct { 346 u8 radio_tx_gain[2]; 347 u8 dsp_predis_atten[2]; 348 } s; 349 u32 dw; 350 }; 351 352 /** 353 * struct tx_power_dual_stream 354 * 355 * Table entries in C_TX_PWR_TBL, C_CHANNEL_SWITCH 356 * 357 * Same format as il_tx_power_dual_stream, but __le32 358 */ 359 struct tx_power_dual_stream { 360 __le32 dw; 361 } __packed; 362 363 /** 364 * struct il4965_tx_power_db 365 * 366 * Entire table within C_TX_PWR_TBL, C_CHANNEL_SWITCH 367 */ 368 struct il4965_tx_power_db { 369 struct tx_power_dual_stream power_tbl[POWER_TBL_NUM_ENTRIES]; 370 } __packed; 371 372 /****************************************************************************** 373 * (0a) 374 * Alive and Error Commands & Responses: 375 * 376 *****************************************************************************/ 377 378 #define UCODE_VALID_OK cpu_to_le32(0x1) 379 #define INITIALIZE_SUBTYPE (9) 380 381 /* 382 * ("Initialize") N_ALIVE = 0x1 (response only, not a command) 383 * 384 * uCode issues this "initialize alive" notification once the initialization 385 * uCode image has completed its work, and is ready to load the runtime image. 386 * This is the *first* "alive" notification that the driver will receive after 387 * rebooting uCode; the "initialize" alive is indicated by subtype field == 9. 388 * 389 * See comments documenting "BSM" (bootstrap state machine). 390 * 391 * For 4965, this notification contains important calibration data for 392 * calculating txpower settings: 393 * 394 * 1) Power supply voltage indication. The voltage sensor outputs higher 395 * values for lower voltage, and vice verse. 396 * 397 * 2) Temperature measurement parameters, for each of two channel widths 398 * (20 MHz and 40 MHz) supported by the radios. Temperature sensing 399 * is done via one of the receiver chains, and channel width influences 400 * the results. 401 * 402 * 3) Tx gain compensation to balance 4965's 2 Tx chains for MIMO operation, 403 * for each of 5 frequency ranges. 404 */ 405 struct il_init_alive_resp { 406 u8 ucode_minor; 407 u8 ucode_major; 408 __le16 reserved1; 409 u8 sw_rev[8]; 410 u8 ver_type; 411 u8 ver_subtype; /* "9" for initialize alive */ 412 __le16 reserved2; 413 __le32 log_event_table_ptr; 414 __le32 error_event_table_ptr; 415 __le32 timestamp; 416 __le32 is_valid; 417 418 /* calibration values from "initialize" uCode */ 419 __le32 voltage; /* signed, higher value is lower voltage */ 420 __le32 therm_r1[2]; /* signed, 1st for normal, 2nd for HT40 */ 421 __le32 therm_r2[2]; /* signed */ 422 __le32 therm_r3[2]; /* signed */ 423 __le32 therm_r4[2]; /* signed */ 424 __le32 tx_atten[5][2]; /* signed MIMO gain comp, 5 freq groups, 425 * 2 Tx chains */ 426 } __packed; 427 428 /** 429 * N_ALIVE = 0x1 (response only, not a command) 430 * 431 * uCode issues this "alive" notification once the runtime image is ready 432 * to receive commands from the driver. This is the *second* "alive" 433 * notification that the driver will receive after rebooting uCode; 434 * this "alive" is indicated by subtype field != 9. 435 * 436 * See comments documenting "BSM" (bootstrap state machine). 437 * 438 * This response includes two pointers to structures within the device's 439 * data SRAM (access via HBUS_TARG_MEM_* regs) that are useful for debugging: 440 * 441 * 1) log_event_table_ptr indicates base of the event log. This traces 442 * a 256-entry history of uCode execution within a circular buffer. 443 * Its header format is: 444 * 445 * __le32 log_size; log capacity (in number of entries) 446 * __le32 type; (1) timestamp with each entry, (0) no timestamp 447 * __le32 wraps; # times uCode has wrapped to top of circular buffer 448 * __le32 write_idx; next circular buffer entry that uCode would fill 449 * 450 * The header is followed by the circular buffer of log entries. Entries 451 * with timestamps have the following format: 452 * 453 * __le32 event_id; range 0 - 1500 454 * __le32 timestamp; low 32 bits of TSF (of network, if associated) 455 * __le32 data; event_id-specific data value 456 * 457 * Entries without timestamps contain only event_id and data. 458 * 459 * 460 * 2) error_event_table_ptr indicates base of the error log. This contains 461 * information about any uCode error that occurs. For 4965, the format 462 * of the error log is: 463 * 464 * __le32 valid; (nonzero) valid, (0) log is empty 465 * __le32 error_id; type of error 466 * __le32 pc; program counter 467 * __le32 blink1; branch link 468 * __le32 blink2; branch link 469 * __le32 ilink1; interrupt link 470 * __le32 ilink2; interrupt link 471 * __le32 data1; error-specific data 472 * __le32 data2; error-specific data 473 * __le32 line; source code line of error 474 * __le32 bcon_time; beacon timer 475 * __le32 tsf_low; network timestamp function timer 476 * __le32 tsf_hi; network timestamp function timer 477 * __le32 gp1; GP1 timer register 478 * __le32 gp2; GP2 timer register 479 * __le32 gp3; GP3 timer register 480 * __le32 ucode_ver; uCode version 481 * __le32 hw_ver; HW Silicon version 482 * __le32 brd_ver; HW board version 483 * __le32 log_pc; log program counter 484 * __le32 frame_ptr; frame pointer 485 * __le32 stack_ptr; stack pointer 486 * __le32 hcmd; last host command 487 * __le32 isr0; isr status register LMPM_NIC_ISR0: rxtx_flag 488 * __le32 isr1; isr status register LMPM_NIC_ISR1: host_flag 489 * __le32 isr2; isr status register LMPM_NIC_ISR2: enc_flag 490 * __le32 isr3; isr status register LMPM_NIC_ISR3: time_flag 491 * __le32 isr4; isr status register LMPM_NIC_ISR4: wico interrupt 492 * __le32 isr_pref; isr status register LMPM_NIC_PREF_STAT 493 * __le32 wait_event; wait event() caller address 494 * __le32 l2p_control; L2pControlField 495 * __le32 l2p_duration; L2pDurationField 496 * __le32 l2p_mhvalid; L2pMhValidBits 497 * __le32 l2p_addr_match; L2pAddrMatchStat 498 * __le32 lmpm_pmg_sel; indicate which clocks are turned on (LMPM_PMG_SEL) 499 * __le32 u_timestamp; indicate when the date and time of the compilation 500 * __le32 reserved; 501 * 502 * The Linux driver can print both logs to the system log when a uCode error 503 * occurs. 504 */ 505 struct il_alive_resp { 506 u8 ucode_minor; 507 u8 ucode_major; 508 __le16 reserved1; 509 u8 sw_rev[8]; 510 u8 ver_type; 511 u8 ver_subtype; /* not "9" for runtime alive */ 512 __le16 reserved2; 513 __le32 log_event_table_ptr; /* SRAM address for event log */ 514 __le32 error_event_table_ptr; /* SRAM address for error log */ 515 __le32 timestamp; 516 __le32 is_valid; 517 } __packed; 518 519 /* 520 * N_ERROR = 0x2 (response only, not a command) 521 */ 522 struct il_error_resp { 523 __le32 error_type; 524 u8 cmd_id; 525 u8 reserved1; 526 __le16 bad_cmd_seq_num; 527 __le32 error_info; 528 __le64 timestamp; 529 } __packed; 530 531 /****************************************************************************** 532 * (1) 533 * RXON Commands & Responses: 534 * 535 *****************************************************************************/ 536 537 /* 538 * Rx config defines & structure 539 */ 540 /* rx_config device types */ 541 enum { 542 RXON_DEV_TYPE_AP = 1, 543 RXON_DEV_TYPE_ESS = 3, 544 RXON_DEV_TYPE_IBSS = 4, 545 RXON_DEV_TYPE_SNIFFER = 6, 546 }; 547 548 #define RXON_RX_CHAIN_DRIVER_FORCE_MSK cpu_to_le16(0x1 << 0) 549 #define RXON_RX_CHAIN_DRIVER_FORCE_POS (0) 550 #define RXON_RX_CHAIN_VALID_MSK cpu_to_le16(0x7 << 1) 551 #define RXON_RX_CHAIN_VALID_POS (1) 552 #define RXON_RX_CHAIN_FORCE_SEL_MSK cpu_to_le16(0x7 << 4) 553 #define RXON_RX_CHAIN_FORCE_SEL_POS (4) 554 #define RXON_RX_CHAIN_FORCE_MIMO_SEL_MSK cpu_to_le16(0x7 << 7) 555 #define RXON_RX_CHAIN_FORCE_MIMO_SEL_POS (7) 556 #define RXON_RX_CHAIN_CNT_MSK cpu_to_le16(0x3 << 10) 557 #define RXON_RX_CHAIN_CNT_POS (10) 558 #define RXON_RX_CHAIN_MIMO_CNT_MSK cpu_to_le16(0x3 << 12) 559 #define RXON_RX_CHAIN_MIMO_CNT_POS (12) 560 #define RXON_RX_CHAIN_MIMO_FORCE_MSK cpu_to_le16(0x1 << 14) 561 #define RXON_RX_CHAIN_MIMO_FORCE_POS (14) 562 563 /* rx_config flags */ 564 /* band & modulation selection */ 565 #define RXON_FLG_BAND_24G_MSK cpu_to_le32(1 << 0) 566 #define RXON_FLG_CCK_MSK cpu_to_le32(1 << 1) 567 /* auto detection enable */ 568 #define RXON_FLG_AUTO_DETECT_MSK cpu_to_le32(1 << 2) 569 /* TGg protection when tx */ 570 #define RXON_FLG_TGG_PROTECT_MSK cpu_to_le32(1 << 3) 571 /* cck short slot & preamble */ 572 #define RXON_FLG_SHORT_SLOT_MSK cpu_to_le32(1 << 4) 573 #define RXON_FLG_SHORT_PREAMBLE_MSK cpu_to_le32(1 << 5) 574 /* antenna selection */ 575 #define RXON_FLG_DIS_DIV_MSK cpu_to_le32(1 << 7) 576 #define RXON_FLG_ANT_SEL_MSK cpu_to_le32(0x0f00) 577 #define RXON_FLG_ANT_A_MSK cpu_to_le32(1 << 8) 578 #define RXON_FLG_ANT_B_MSK cpu_to_le32(1 << 9) 579 /* radar detection enable */ 580 #define RXON_FLG_RADAR_DETECT_MSK cpu_to_le32(1 << 12) 581 #define RXON_FLG_TGJ_NARROW_BAND_MSK cpu_to_le32(1 << 13) 582 /* rx response to host with 8-byte TSF 583 * (according to ON_AIR deassertion) */ 584 #define RXON_FLG_TSF2HOST_MSK cpu_to_le32(1 << 15) 585 586 /* HT flags */ 587 #define RXON_FLG_CTRL_CHANNEL_LOC_POS (22) 588 #define RXON_FLG_CTRL_CHANNEL_LOC_HI_MSK cpu_to_le32(0x1 << 22) 589 590 #define RXON_FLG_HT_OPERATING_MODE_POS (23) 591 592 #define RXON_FLG_HT_PROT_MSK cpu_to_le32(0x1 << 23) 593 #define RXON_FLG_HT40_PROT_MSK cpu_to_le32(0x2 << 23) 594 595 #define RXON_FLG_CHANNEL_MODE_POS (25) 596 #define RXON_FLG_CHANNEL_MODE_MSK cpu_to_le32(0x3 << 25) 597 598 /* channel mode */ 599 enum { 600 CHANNEL_MODE_LEGACY = 0, 601 CHANNEL_MODE_PURE_40 = 1, 602 CHANNEL_MODE_MIXED = 2, 603 CHANNEL_MODE_RESERVED = 3, 604 }; 605 #define RXON_FLG_CHANNEL_MODE_LEGACY \ 606 cpu_to_le32(CHANNEL_MODE_LEGACY << RXON_FLG_CHANNEL_MODE_POS) 607 #define RXON_FLG_CHANNEL_MODE_PURE_40 \ 608 cpu_to_le32(CHANNEL_MODE_PURE_40 << RXON_FLG_CHANNEL_MODE_POS) 609 #define RXON_FLG_CHANNEL_MODE_MIXED \ 610 cpu_to_le32(CHANNEL_MODE_MIXED << RXON_FLG_CHANNEL_MODE_POS) 611 612 /* CTS to self (if spec allows) flag */ 613 #define RXON_FLG_SELF_CTS_EN cpu_to_le32(0x1<<30) 614 615 /* rx_config filter flags */ 616 /* accept all data frames */ 617 #define RXON_FILTER_PROMISC_MSK cpu_to_le32(1 << 0) 618 /* pass control & management to host */ 619 #define RXON_FILTER_CTL2HOST_MSK cpu_to_le32(1 << 1) 620 /* accept multi-cast */ 621 #define RXON_FILTER_ACCEPT_GRP_MSK cpu_to_le32(1 << 2) 622 /* don't decrypt uni-cast frames */ 623 #define RXON_FILTER_DIS_DECRYPT_MSK cpu_to_le32(1 << 3) 624 /* don't decrypt multi-cast frames */ 625 #define RXON_FILTER_DIS_GRP_DECRYPT_MSK cpu_to_le32(1 << 4) 626 /* STA is associated */ 627 #define RXON_FILTER_ASSOC_MSK cpu_to_le32(1 << 5) 628 /* transfer to host non bssid beacons in associated state */ 629 #define RXON_FILTER_BCON_AWARE_MSK cpu_to_le32(1 << 6) 630 631 /** 632 * C_RXON = 0x10 (command, has simple generic response) 633 * 634 * RXON tunes the radio tuner to a service channel, and sets up a number 635 * of parameters that are used primarily for Rx, but also for Tx operations. 636 * 637 * NOTE: When tuning to a new channel, driver must set the 638 * RXON_FILTER_ASSOC_MSK to 0. This will clear station-dependent 639 * info within the device, including the station tables, tx retry 640 * rate tables, and txpower tables. Driver must build a new station 641 * table and txpower table before transmitting anything on the RXON 642 * channel. 643 * 644 * NOTE: All RXONs wipe clean the internal txpower table. Driver must 645 * issue a new C_TX_PWR_TBL after each C_RXON (0x10), 646 * regardless of whether RXON_FILTER_ASSOC_MSK is set. 647 */ 648 649 struct il3945_rxon_cmd { 650 u8 node_addr[6]; 651 __le16 reserved1; 652 u8 bssid_addr[6]; 653 __le16 reserved2; 654 u8 wlap_bssid_addr[6]; 655 __le16 reserved3; 656 u8 dev_type; 657 u8 air_propagation; 658 __le16 reserved4; 659 u8 ofdm_basic_rates; 660 u8 cck_basic_rates; 661 __le16 assoc_id; 662 __le32 flags; 663 __le32 filter_flags; 664 __le16 channel; 665 __le16 reserved5; 666 } __packed; 667 668 struct il4965_rxon_cmd { 669 u8 node_addr[6]; 670 __le16 reserved1; 671 u8 bssid_addr[6]; 672 __le16 reserved2; 673 u8 wlap_bssid_addr[6]; 674 __le16 reserved3; 675 u8 dev_type; 676 u8 air_propagation; 677 __le16 rx_chain; 678 u8 ofdm_basic_rates; 679 u8 cck_basic_rates; 680 __le16 assoc_id; 681 __le32 flags; 682 __le32 filter_flags; 683 __le16 channel; 684 u8 ofdm_ht_single_stream_basic_rates; 685 u8 ofdm_ht_dual_stream_basic_rates; 686 } __packed; 687 688 /* Create a common rxon cmd which will be typecast into the 3945 or 4965 689 * specific rxon cmd, depending on where it is called from. 690 */ 691 struct il_rxon_cmd { 692 u8 node_addr[6]; 693 __le16 reserved1; 694 u8 bssid_addr[6]; 695 __le16 reserved2; 696 u8 wlap_bssid_addr[6]; 697 __le16 reserved3; 698 u8 dev_type; 699 u8 air_propagation; 700 __le16 rx_chain; 701 u8 ofdm_basic_rates; 702 u8 cck_basic_rates; 703 __le16 assoc_id; 704 __le32 flags; 705 __le32 filter_flags; 706 __le16 channel; 707 u8 ofdm_ht_single_stream_basic_rates; 708 u8 ofdm_ht_dual_stream_basic_rates; 709 u8 reserved4; 710 u8 reserved5; 711 } __packed; 712 713 /* 714 * C_RXON_ASSOC = 0x11 (command, has simple generic response) 715 */ 716 struct il3945_rxon_assoc_cmd { 717 __le32 flags; 718 __le32 filter_flags; 719 u8 ofdm_basic_rates; 720 u8 cck_basic_rates; 721 __le16 reserved; 722 } __packed; 723 724 struct il4965_rxon_assoc_cmd { 725 __le32 flags; 726 __le32 filter_flags; 727 u8 ofdm_basic_rates; 728 u8 cck_basic_rates; 729 u8 ofdm_ht_single_stream_basic_rates; 730 u8 ofdm_ht_dual_stream_basic_rates; 731 __le16 rx_chain_select_flags; 732 __le16 reserved; 733 } __packed; 734 735 #define IL_CONN_MAX_LISTEN_INTERVAL 10 736 #define IL_MAX_UCODE_BEACON_INTERVAL 4 /* 4096 */ 737 #define IL39_MAX_UCODE_BEACON_INTERVAL 1 /* 1024 */ 738 739 /* 740 * C_RXON_TIMING = 0x14 (command, has simple generic response) 741 */ 742 struct il_rxon_time_cmd { 743 __le64 timestamp; 744 __le16 beacon_interval; 745 __le16 atim_win; 746 __le32 beacon_init_val; 747 __le16 listen_interval; 748 u8 dtim_period; 749 u8 delta_cp_bss_tbtts; 750 } __packed; 751 752 /* 753 * C_CHANNEL_SWITCH = 0x72 (command, has simple generic response) 754 */ 755 struct il3945_channel_switch_cmd { 756 u8 band; 757 u8 expect_beacon; 758 __le16 channel; 759 __le32 rxon_flags; 760 __le32 rxon_filter_flags; 761 __le32 switch_time; 762 struct il3945_power_per_rate power[IL_MAX_RATES]; 763 } __packed; 764 765 struct il4965_channel_switch_cmd { 766 u8 band; 767 u8 expect_beacon; 768 __le16 channel; 769 __le32 rxon_flags; 770 __le32 rxon_filter_flags; 771 __le32 switch_time; 772 struct il4965_tx_power_db tx_power; 773 } __packed; 774 775 /* 776 * N_CHANNEL_SWITCH = 0x73 (notification only, not a command) 777 */ 778 struct il_csa_notification { 779 __le16 band; 780 __le16 channel; 781 __le32 status; /* 0 - OK, 1 - fail */ 782 } __packed; 783 784 /****************************************************************************** 785 * (2) 786 * Quality-of-Service (QOS) Commands & Responses: 787 * 788 *****************************************************************************/ 789 790 /** 791 * struct il_ac_qos -- QOS timing params for C_QOS_PARAM 792 * One for each of 4 EDCA access categories in struct il_qosparam_cmd 793 * 794 * @cw_min: Contention win, start value in numbers of slots. 795 * Should be a power-of-2, minus 1. Device's default is 0x0f. 796 * @cw_max: Contention win, max value in numbers of slots. 797 * Should be a power-of-2, minus 1. Device's default is 0x3f. 798 * @aifsn: Number of slots in Arbitration Interframe Space (before 799 * performing random backoff timing prior to Tx). Device default 1. 800 * @edca_txop: Length of Tx opportunity, in uSecs. Device default is 0. 801 * 802 * Device will automatically increase contention win by (2*CW) + 1 for each 803 * transmission retry. Device uses cw_max as a bit mask, ANDed with new CW 804 * value, to cap the CW value. 805 */ 806 struct il_ac_qos { 807 __le16 cw_min; 808 __le16 cw_max; 809 u8 aifsn; 810 u8 reserved1; 811 __le16 edca_txop; 812 } __packed; 813 814 /* QoS flags defines */ 815 #define QOS_PARAM_FLG_UPDATE_EDCA_MSK cpu_to_le32(0x01) 816 #define QOS_PARAM_FLG_TGN_MSK cpu_to_le32(0x02) 817 #define QOS_PARAM_FLG_TXOP_TYPE_MSK cpu_to_le32(0x10) 818 819 /* Number of Access Categories (AC) (EDCA), queues 0..3 */ 820 #define AC_NUM 4 821 822 /* 823 * C_QOS_PARAM = 0x13 (command, has simple generic response) 824 * 825 * This command sets up timings for each of the 4 prioritized EDCA Tx FIFOs 826 * 0: Background, 1: Best Effort, 2: Video, 3: Voice. 827 */ 828 struct il_qosparam_cmd { 829 __le32 qos_flags; 830 struct il_ac_qos ac[AC_NUM]; 831 } __packed; 832 833 /****************************************************************************** 834 * (3) 835 * Add/Modify Stations Commands & Responses: 836 * 837 *****************************************************************************/ 838 /* 839 * Multi station support 840 */ 841 842 /* Special, dedicated locations within device's station table */ 843 #define IL_AP_ID 0 844 #define IL_STA_ID 2 845 #define IL3945_BROADCAST_ID 24 846 #define IL3945_STATION_COUNT 25 847 #define IL4965_BROADCAST_ID 31 848 #define IL4965_STATION_COUNT 32 849 850 #define IL_STATION_COUNT 32 /* MAX(3945,4965) */ 851 #define IL_INVALID_STATION 255 852 853 #define STA_FLG_TX_RATE_MSK cpu_to_le32(1 << 2) 854 #define STA_FLG_PWR_SAVE_MSK cpu_to_le32(1 << 8) 855 #define STA_FLG_RTS_MIMO_PROT_MSK cpu_to_le32(1 << 17) 856 #define STA_FLG_AGG_MPDU_8US_MSK cpu_to_le32(1 << 18) 857 #define STA_FLG_MAX_AGG_SIZE_POS (19) 858 #define STA_FLG_MAX_AGG_SIZE_MSK cpu_to_le32(3 << 19) 859 #define STA_FLG_HT40_EN_MSK cpu_to_le32(1 << 21) 860 #define STA_FLG_MIMO_DIS_MSK cpu_to_le32(1 << 22) 861 #define STA_FLG_AGG_MPDU_DENSITY_POS (23) 862 #define STA_FLG_AGG_MPDU_DENSITY_MSK cpu_to_le32(7 << 23) 863 864 /* Use in mode field. 1: modify existing entry, 0: add new station entry */ 865 #define STA_CONTROL_MODIFY_MSK 0x01 866 867 /* key flags __le16*/ 868 #define STA_KEY_FLG_ENCRYPT_MSK cpu_to_le16(0x0007) 869 #define STA_KEY_FLG_NO_ENC cpu_to_le16(0x0000) 870 #define STA_KEY_FLG_WEP cpu_to_le16(0x0001) 871 #define STA_KEY_FLG_CCMP cpu_to_le16(0x0002) 872 #define STA_KEY_FLG_TKIP cpu_to_le16(0x0003) 873 874 #define STA_KEY_FLG_KEYID_POS 8 875 #define STA_KEY_FLG_INVALID cpu_to_le16(0x0800) 876 /* wep key is either from global key (0) or from station info array (1) */ 877 #define STA_KEY_FLG_MAP_KEY_MSK cpu_to_le16(0x0008) 878 879 /* wep key in STA: 5-bytes (0) or 13-bytes (1) */ 880 #define STA_KEY_FLG_KEY_SIZE_MSK cpu_to_le16(0x1000) 881 #define STA_KEY_MULTICAST_MSK cpu_to_le16(0x4000) 882 #define STA_KEY_MAX_NUM 8 883 884 /* Flags indicate whether to modify vs. don't change various station params */ 885 #define STA_MODIFY_KEY_MASK 0x01 886 #define STA_MODIFY_TID_DISABLE_TX 0x02 887 #define STA_MODIFY_TX_RATE_MSK 0x04 888 #define STA_MODIFY_ADDBA_TID_MSK 0x08 889 #define STA_MODIFY_DELBA_TID_MSK 0x10 890 #define STA_MODIFY_SLEEP_TX_COUNT_MSK 0x20 891 892 /* Receiver address (actually, Rx station's idx into station table), 893 * combined with Traffic ID (QOS priority), in format used by Tx Scheduler */ 894 #define BUILD_RAxTID(sta_id, tid) (((sta_id) << 4) + (tid)) 895 896 struct il4965_keyinfo { 897 __le16 key_flags; 898 u8 tkip_rx_tsc_byte2; /* TSC[2] for key mix ph1 detection */ 899 u8 reserved1; 900 __le16 tkip_rx_ttak[5]; /* 10-byte unicast TKIP TTAK */ 901 u8 key_offset; 902 u8 reserved2; 903 u8 key[16]; /* 16-byte unicast decryption key */ 904 } __packed; 905 906 /** 907 * struct sta_id_modify 908 * @addr[ETH_ALEN]: station's MAC address 909 * @sta_id: idx of station in uCode's station table 910 * @modify_mask: STA_MODIFY_*, 1: modify, 0: don't change 911 * 912 * Driver selects unused table idx when adding new station, 913 * or the idx to a pre-existing station entry when modifying that station. 914 * Some idxes have special purposes (IL_AP_ID, idx 0, is for AP). 915 * 916 * modify_mask flags select which parameters to modify vs. leave alone. 917 */ 918 struct sta_id_modify { 919 u8 addr[ETH_ALEN]; 920 __le16 reserved1; 921 u8 sta_id; 922 u8 modify_mask; 923 __le16 reserved2; 924 } __packed; 925 926 /* 927 * C_ADD_STA = 0x18 (command) 928 * 929 * The device contains an internal table of per-station information, 930 * with info on security keys, aggregation parameters, and Tx rates for 931 * initial Tx attempt and any retries (4965 devices uses 932 * C_TX_LINK_QUALITY_CMD, 933 * 3945 uses C_RATE_SCALE to set up rate tables). 934 * 935 * C_ADD_STA sets up the table entry for one station, either creating 936 * a new entry, or modifying a pre-existing one. 937 * 938 * NOTE: RXON command (without "associated" bit set) wipes the station table 939 * clean. Moving into RF_KILL state does this also. Driver must set up 940 * new station table before transmitting anything on the RXON channel 941 * (except active scans or active measurements; those commands carry 942 * their own txpower/rate setup data). 943 * 944 * When getting started on a new channel, driver must set up the 945 * IL_BROADCAST_ID entry (last entry in the table). For a client 946 * station in a BSS, once an AP is selected, driver sets up the AP STA 947 * in the IL_AP_ID entry (1st entry in the table). BROADCAST and AP 948 * are all that are needed for a BSS client station. If the device is 949 * used as AP, or in an IBSS network, driver must set up station table 950 * entries for all STAs in network, starting with idx IL_STA_ID. 951 */ 952 953 struct il3945_addsta_cmd { 954 u8 mode; /* 1: modify existing, 0: add new station */ 955 u8 reserved[3]; 956 struct sta_id_modify sta; 957 struct il4965_keyinfo key; 958 __le32 station_flags; /* STA_FLG_* */ 959 __le32 station_flags_msk; /* STA_FLG_* */ 960 961 /* bit field to disable (1) or enable (0) Tx for Traffic ID (TID) 962 * corresponding to bit (e.g. bit 5 controls TID 5). 963 * Set modify_mask bit STA_MODIFY_TID_DISABLE_TX to use this field. */ 964 __le16 tid_disable_tx; 965 966 __le16 rate_n_flags; 967 968 /* TID for which to add block-ack support. 969 * Set modify_mask bit STA_MODIFY_ADDBA_TID_MSK to use this field. */ 970 u8 add_immediate_ba_tid; 971 972 /* TID for which to remove block-ack support. 973 * Set modify_mask bit STA_MODIFY_DELBA_TID_MSK to use this field. */ 974 u8 remove_immediate_ba_tid; 975 976 /* Starting Sequence Number for added block-ack support. 977 * Set modify_mask bit STA_MODIFY_ADDBA_TID_MSK to use this field. */ 978 __le16 add_immediate_ba_ssn; 979 } __packed; 980 981 struct il4965_addsta_cmd { 982 u8 mode; /* 1: modify existing, 0: add new station */ 983 u8 reserved[3]; 984 struct sta_id_modify sta; 985 struct il4965_keyinfo key; 986 __le32 station_flags; /* STA_FLG_* */ 987 __le32 station_flags_msk; /* STA_FLG_* */ 988 989 /* bit field to disable (1) or enable (0) Tx for Traffic ID (TID) 990 * corresponding to bit (e.g. bit 5 controls TID 5). 991 * Set modify_mask bit STA_MODIFY_TID_DISABLE_TX to use this field. */ 992 __le16 tid_disable_tx; 993 994 __le16 reserved1; 995 996 /* TID for which to add block-ack support. 997 * Set modify_mask bit STA_MODIFY_ADDBA_TID_MSK to use this field. */ 998 u8 add_immediate_ba_tid; 999 1000 /* TID for which to remove block-ack support. 1001 * Set modify_mask bit STA_MODIFY_DELBA_TID_MSK to use this field. */ 1002 u8 remove_immediate_ba_tid; 1003 1004 /* Starting Sequence Number for added block-ack support. 1005 * Set modify_mask bit STA_MODIFY_ADDBA_TID_MSK to use this field. */ 1006 __le16 add_immediate_ba_ssn; 1007 1008 /* 1009 * Number of packets OK to transmit to station even though 1010 * it is asleep -- used to synchronise PS-poll and u-APSD 1011 * responses while ucode keeps track of STA sleep state. 1012 */ 1013 __le16 sleep_tx_count; 1014 1015 __le16 reserved2; 1016 } __packed; 1017 1018 /* Wrapper struct for 3945 and 4965 addsta_cmd structures */ 1019 struct il_addsta_cmd { 1020 u8 mode; /* 1: modify existing, 0: add new station */ 1021 u8 reserved[3]; 1022 struct sta_id_modify sta; 1023 struct il4965_keyinfo key; 1024 __le32 station_flags; /* STA_FLG_* */ 1025 __le32 station_flags_msk; /* STA_FLG_* */ 1026 1027 /* bit field to disable (1) or enable (0) Tx for Traffic ID (TID) 1028 * corresponding to bit (e.g. bit 5 controls TID 5). 1029 * Set modify_mask bit STA_MODIFY_TID_DISABLE_TX to use this field. */ 1030 __le16 tid_disable_tx; 1031 1032 __le16 rate_n_flags; /* 3945 only */ 1033 1034 /* TID for which to add block-ack support. 1035 * Set modify_mask bit STA_MODIFY_ADDBA_TID_MSK to use this field. */ 1036 u8 add_immediate_ba_tid; 1037 1038 /* TID for which to remove block-ack support. 1039 * Set modify_mask bit STA_MODIFY_DELBA_TID_MSK to use this field. */ 1040 u8 remove_immediate_ba_tid; 1041 1042 /* Starting Sequence Number for added block-ack support. 1043 * Set modify_mask bit STA_MODIFY_ADDBA_TID_MSK to use this field. */ 1044 __le16 add_immediate_ba_ssn; 1045 1046 /* 1047 * Number of packets OK to transmit to station even though 1048 * it is asleep -- used to synchronise PS-poll and u-APSD 1049 * responses while ucode keeps track of STA sleep state. 1050 */ 1051 __le16 sleep_tx_count; 1052 1053 __le16 reserved2; 1054 } __packed; 1055 1056 #define ADD_STA_SUCCESS_MSK 0x1 1057 #define ADD_STA_NO_ROOM_IN_TBL 0x2 1058 #define ADD_STA_NO_BLOCK_ACK_RESOURCE 0x4 1059 #define ADD_STA_MODIFY_NON_EXIST_STA 0x8 1060 /* 1061 * C_ADD_STA = 0x18 (response) 1062 */ 1063 struct il_add_sta_resp { 1064 u8 status; /* ADD_STA_* */ 1065 } __packed; 1066 1067 #define REM_STA_SUCCESS_MSK 0x1 1068 /* 1069 * C_REM_STA = 0x19 (response) 1070 */ 1071 struct il_rem_sta_resp { 1072 u8 status; 1073 } __packed; 1074 1075 /* 1076 * C_REM_STA = 0x19 (command) 1077 */ 1078 struct il_rem_sta_cmd { 1079 u8 num_sta; /* number of removed stations */ 1080 u8 reserved[3]; 1081 u8 addr[ETH_ALEN]; /* MAC addr of the first station */ 1082 u8 reserved2[2]; 1083 } __packed; 1084 1085 #define IL_TX_FIFO_BK_MSK cpu_to_le32(BIT(0)) 1086 #define IL_TX_FIFO_BE_MSK cpu_to_le32(BIT(1)) 1087 #define IL_TX_FIFO_VI_MSK cpu_to_le32(BIT(2)) 1088 #define IL_TX_FIFO_VO_MSK cpu_to_le32(BIT(3)) 1089 #define IL_AGG_TX_QUEUE_MSK cpu_to_le32(0xffc00) 1090 1091 #define IL_DROP_SINGLE 0 1092 #define IL_DROP_SELECTED 1 1093 #define IL_DROP_ALL 2 1094 1095 /* 1096 * REPLY_WEP_KEY = 0x20 1097 */ 1098 struct il_wep_key { 1099 u8 key_idx; 1100 u8 key_offset; 1101 u8 reserved1[2]; 1102 u8 key_size; 1103 u8 reserved2[3]; 1104 u8 key[16]; 1105 } __packed; 1106 1107 struct il_wep_cmd { 1108 u8 num_keys; 1109 u8 global_key_type; 1110 u8 flags; 1111 u8 reserved; 1112 struct il_wep_key key[]; 1113 } __packed; 1114 1115 #define WEP_KEY_WEP_TYPE 1 1116 #define WEP_KEYS_MAX 4 1117 #define WEP_INVALID_OFFSET 0xff 1118 #define WEP_KEY_LEN_64 5 1119 #define WEP_KEY_LEN_128 13 1120 1121 /****************************************************************************** 1122 * (4) 1123 * Rx Responses: 1124 * 1125 *****************************************************************************/ 1126 1127 #define RX_RES_STATUS_NO_CRC32_ERROR cpu_to_le32(1 << 0) 1128 #define RX_RES_STATUS_NO_RXE_OVERFLOW cpu_to_le32(1 << 1) 1129 1130 #define RX_RES_PHY_FLAGS_BAND_24_MSK cpu_to_le16(1 << 0) 1131 #define RX_RES_PHY_FLAGS_MOD_CCK_MSK cpu_to_le16(1 << 1) 1132 #define RX_RES_PHY_FLAGS_SHORT_PREAMBLE_MSK cpu_to_le16(1 << 2) 1133 #define RX_RES_PHY_FLAGS_NARROW_BAND_MSK cpu_to_le16(1 << 3) 1134 #define RX_RES_PHY_FLAGS_ANTENNA_MSK 0x70 1135 #define RX_RES_PHY_FLAGS_ANTENNA_POS 4 1136 #define RX_RES_PHY_FLAGS_AGG_MSK cpu_to_le16(1 << 7) 1137 1138 #define RX_RES_STATUS_SEC_TYPE_MSK (0x7 << 8) 1139 #define RX_RES_STATUS_SEC_TYPE_NONE (0x0 << 8) 1140 #define RX_RES_STATUS_SEC_TYPE_WEP (0x1 << 8) 1141 #define RX_RES_STATUS_SEC_TYPE_CCMP (0x2 << 8) 1142 #define RX_RES_STATUS_SEC_TYPE_TKIP (0x3 << 8) 1143 #define RX_RES_STATUS_SEC_TYPE_ERR (0x7 << 8) 1144 1145 #define RX_RES_STATUS_STATION_FOUND (1<<6) 1146 #define RX_RES_STATUS_NO_STATION_INFO_MISMATCH (1<<7) 1147 1148 #define RX_RES_STATUS_DECRYPT_TYPE_MSK (0x3 << 11) 1149 #define RX_RES_STATUS_NOT_DECRYPT (0x0 << 11) 1150 #define RX_RES_STATUS_DECRYPT_OK (0x3 << 11) 1151 #define RX_RES_STATUS_BAD_ICV_MIC (0x1 << 11) 1152 #define RX_RES_STATUS_BAD_KEY_TTAK (0x2 << 11) 1153 1154 #define RX_MPDU_RES_STATUS_ICV_OK (0x20) 1155 #define RX_MPDU_RES_STATUS_MIC_OK (0x40) 1156 #define RX_MPDU_RES_STATUS_TTAK_OK (1 << 7) 1157 #define RX_MPDU_RES_STATUS_DEC_DONE_MSK (0x800) 1158 1159 struct il3945_rx_frame_stats { 1160 /* New members MUST be added within the __struct_group() macro below. */ 1161 __struct_group(il3945_rx_frame_stats_hdr, hdr, __packed, 1162 u8 phy_count; 1163 u8 id; 1164 u8 rssi; 1165 u8 agc; 1166 __le16 sig_avg; 1167 __le16 noise_diff; 1168 ); 1169 u8 payload[]; 1170 } __packed; 1171 static_assert(offsetof(struct il3945_rx_frame_stats, payload) == sizeof(struct il3945_rx_frame_stats_hdr), 1172 "struct member likely outside of __struct_group()"); 1173 1174 struct il3945_rx_frame_hdr { 1175 /* New members MUST be added within the __struct_group() macro below. */ 1176 __struct_group(il3945_rx_frame_hdr_hdr, hdr, __packed, 1177 __le16 channel; 1178 __le16 phy_flags; 1179 u8 reserved1; 1180 u8 rate; 1181 __le16 len; 1182 ); 1183 u8 payload[]; 1184 } __packed; 1185 static_assert(offsetof(struct il3945_rx_frame_hdr, payload) == sizeof(struct il3945_rx_frame_hdr_hdr), 1186 "struct member likely outside of __struct_group()"); 1187 1188 struct il3945_rx_frame_end { 1189 __le32 status; 1190 __le64 timestamp; 1191 __le32 beacon_timestamp; 1192 } __packed; 1193 1194 /* 1195 * N_3945_RX = 0x1b (response only, not a command) 1196 * 1197 * NOTE: DO NOT dereference from casts to this structure 1198 * It is provided only for calculating minimum data set size. 1199 * The actual offsets of the hdr and end are dynamic based on 1200 * stats.phy_count 1201 */ 1202 struct il3945_rx_frame { 1203 struct il3945_rx_frame_stats_hdr stats; 1204 struct il3945_rx_frame_hdr_hdr hdr; 1205 struct il3945_rx_frame_end end; 1206 } __packed; 1207 1208 #define IL39_RX_FRAME_SIZE (4 + sizeof(struct il3945_rx_frame)) 1209 1210 /* Fixed (non-configurable) rx data from phy */ 1211 1212 #define IL49_RX_RES_PHY_CNT 14 1213 #define IL49_RX_PHY_FLAGS_ANTENNAE_OFFSET (4) 1214 #define IL49_RX_PHY_FLAGS_ANTENNAE_MASK (0x70) 1215 #define IL49_AGC_DB_MASK (0x3f80) /* MASK(7,13) */ 1216 #define IL49_AGC_DB_POS (7) 1217 struct il4965_rx_non_cfg_phy { 1218 __le16 ant_selection; /* ant A bit 4, ant B bit 5, ant C bit 6 */ 1219 __le16 agc_info; /* agc code 0:6, agc dB 7:13, reserved 14:15 */ 1220 u8 rssi_info[6]; /* we use even entries, 0/2/4 for A/B/C rssi */ 1221 u8 pad[]; 1222 } __packed; 1223 1224 /* 1225 * N_RX = 0xc3 (response only, not a command) 1226 * Used only for legacy (non 11n) frames. 1227 */ 1228 struct il_rx_phy_res { 1229 u8 non_cfg_phy_cnt; /* non configurable DSP phy data byte count */ 1230 u8 cfg_phy_cnt; /* configurable DSP phy data byte count */ 1231 u8 stat_id; /* configurable DSP phy data set ID */ 1232 u8 reserved1; 1233 __le64 timestamp; /* TSF at on air rise */ 1234 __le32 beacon_time_stamp; /* beacon at on-air rise */ 1235 __le16 phy_flags; /* general phy flags: band, modulation, ... */ 1236 __le16 channel; /* channel number */ 1237 u8 non_cfg_phy_buf[32]; /* for various implementations of non_cfg_phy */ 1238 __le32 rate_n_flags; /* RATE_MCS_* */ 1239 __le16 byte_count; /* frame's byte-count */ 1240 __le16 frame_time; /* frame's time on the air */ 1241 } __packed; 1242 1243 struct il_rx_mpdu_res_start { 1244 __le16 byte_count; 1245 __le16 reserved; 1246 } __packed; 1247 1248 /****************************************************************************** 1249 * (5) 1250 * Tx Commands & Responses: 1251 * 1252 * Driver must place each C_TX command into one of the prioritized Tx 1253 * queues in host DRAM, shared between driver and device (see comments for 1254 * SCD registers and Tx/Rx Queues). When the device's Tx scheduler and uCode 1255 * are preparing to transmit, the device pulls the Tx command over the PCI 1256 * bus via one of the device's Tx DMA channels, to fill an internal FIFO 1257 * from which data will be transmitted. 1258 * 1259 * uCode handles all timing and protocol related to control frames 1260 * (RTS/CTS/ACK), based on flags in the Tx command. uCode and Tx scheduler 1261 * handle reception of block-acks; uCode updates the host driver via 1262 * N_COMPRESSED_BA. 1263 * 1264 * uCode handles retrying Tx when an ACK is expected but not received. 1265 * This includes trying lower data rates than the one requested in the Tx 1266 * command, as set up by the C_RATE_SCALE (for 3945) or 1267 * C_TX_LINK_QUALITY_CMD (4965). 1268 * 1269 * Driver sets up transmit power for various rates via C_TX_PWR_TBL. 1270 * This command must be executed after every RXON command, before Tx can occur. 1271 *****************************************************************************/ 1272 1273 /* C_TX Tx flags field */ 1274 1275 /* 1276 * 1: Use Request-To-Send protocol before this frame. 1277 * Mutually exclusive vs. TX_CMD_FLG_CTS_MSK. 1278 */ 1279 #define TX_CMD_FLG_RTS_MSK cpu_to_le32(1 << 1) 1280 1281 /* 1282 * 1: Transmit Clear-To-Send to self before this frame. 1283 * Driver should set this for AUTH/DEAUTH/ASSOC-REQ/REASSOC mgmnt frames. 1284 * Mutually exclusive vs. TX_CMD_FLG_RTS_MSK. 1285 */ 1286 #define TX_CMD_FLG_CTS_MSK cpu_to_le32(1 << 2) 1287 1288 /* 1: Expect ACK from receiving station 1289 * 0: Don't expect ACK (MAC header's duration field s/b 0) 1290 * Set this for unicast frames, but not broadcast/multicast. */ 1291 #define TX_CMD_FLG_ACK_MSK cpu_to_le32(1 << 3) 1292 1293 /* For 4965 devices: 1294 * 1: Use rate scale table (see C_TX_LINK_QUALITY_CMD). 1295 * Tx command's initial_rate_idx indicates first rate to try; 1296 * uCode walks through table for additional Tx attempts. 1297 * 0: Use Tx rate/MCS from Tx command's rate_n_flags field. 1298 * This rate will be used for all Tx attempts; it will not be scaled. */ 1299 #define TX_CMD_FLG_STA_RATE_MSK cpu_to_le32(1 << 4) 1300 1301 /* 1: Expect immediate block-ack. 1302 * Set when Txing a block-ack request frame. Also set TX_CMD_FLG_ACK_MSK. */ 1303 #define TX_CMD_FLG_IMM_BA_RSP_MASK cpu_to_le32(1 << 6) 1304 1305 /* 1306 * 1: Frame requires full Tx-Op protection. 1307 * Set this if either RTS or CTS Tx Flag gets set. 1308 */ 1309 #define TX_CMD_FLG_FULL_TXOP_PROT_MSK cpu_to_le32(1 << 7) 1310 1311 /* Tx antenna selection field; used only for 3945, reserved (0) for 4965 devices. 1312 * Set field to "0" to allow 3945 uCode to select antenna (normal usage). */ 1313 #define TX_CMD_FLG_ANT_SEL_MSK cpu_to_le32(0xf00) 1314 #define TX_CMD_FLG_ANT_A_MSK cpu_to_le32(1 << 8) 1315 #define TX_CMD_FLG_ANT_B_MSK cpu_to_le32(1 << 9) 1316 1317 /* 1: uCode overrides sequence control field in MAC header. 1318 * 0: Driver provides sequence control field in MAC header. 1319 * Set this for management frames, non-QOS data frames, non-unicast frames, 1320 * and also in Tx command embedded in C_SCAN for active scans. */ 1321 #define TX_CMD_FLG_SEQ_CTL_MSK cpu_to_le32(1 << 13) 1322 1323 /* 1: This frame is non-last MPDU; more fragments are coming. 1324 * 0: Last fragment, or not using fragmentation. */ 1325 #define TX_CMD_FLG_MORE_FRAG_MSK cpu_to_le32(1 << 14) 1326 1327 /* 1: uCode calculates and inserts Timestamp Function (TSF) in outgoing frame. 1328 * 0: No TSF required in outgoing frame. 1329 * Set this for transmitting beacons and probe responses. */ 1330 #define TX_CMD_FLG_TSF_MSK cpu_to_le32(1 << 16) 1331 1332 /* 1: Driver inserted 2 bytes pad after the MAC header, for (required) dword 1333 * alignment of frame's payload data field. 1334 * 0: No pad 1335 * Set this for MAC headers with 26 or 30 bytes, i.e. those with QOS or ADDR4 1336 * field (but not both). Driver must align frame data (i.e. data following 1337 * MAC header) to DWORD boundary. */ 1338 #define TX_CMD_FLG_MH_PAD_MSK cpu_to_le32(1 << 20) 1339 1340 /* accelerate aggregation support 1341 * 0 - no CCMP encryption; 1 - CCMP encryption */ 1342 #define TX_CMD_FLG_AGG_CCMP_MSK cpu_to_le32(1 << 22) 1343 1344 /* HCCA-AP - disable duration overwriting. */ 1345 #define TX_CMD_FLG_DUR_MSK cpu_to_le32(1 << 25) 1346 1347 /* 1348 * TX command security control 1349 */ 1350 #define TX_CMD_SEC_WEP 0x01 1351 #define TX_CMD_SEC_CCM 0x02 1352 #define TX_CMD_SEC_TKIP 0x03 1353 #define TX_CMD_SEC_MSK 0x03 1354 #define TX_CMD_SEC_SHIFT 6 1355 #define TX_CMD_SEC_KEY128 0x08 1356 1357 /* 1358 * C_TX = 0x1c (command) 1359 */ 1360 1361 struct il3945_tx_cmd { 1362 /* New members MUST be added within the __struct_group() macro below. */ 1363 __struct_group(il3945_tx_cmd_hdr, __hdr, __packed, 1364 /* 1365 * MPDU byte count: 1366 * MAC header (24/26/30/32 bytes) + 2 bytes pad if 26/30 header size, 1367 * + 8 byte IV for CCM or TKIP (not used for WEP) 1368 * + Data payload 1369 * + 8-byte MIC (not used for CCM/WEP) 1370 * NOTE: Does not include Tx command bytes, post-MAC pad bytes, 1371 * MIC (CCM) 8 bytes, ICV (WEP/TKIP/CKIP) 4 bytes, CRC 4 bytes.i 1372 * Range: 14-2342 bytes. 1373 */ 1374 __le16 len; 1375 1376 /* 1377 * MPDU or MSDU byte count for next frame. 1378 * Used for fragmentation and bursting, but not 11n aggregation. 1379 * Same as "len", but for next frame. Set to 0 if not applicable. 1380 */ 1381 __le16 next_frame_len; 1382 1383 __le32 tx_flags; /* TX_CMD_FLG_* */ 1384 1385 u8 rate; 1386 1387 /* Index of recipient station in uCode's station table */ 1388 u8 sta_id; 1389 u8 tid_tspec; 1390 u8 sec_ctl; 1391 u8 key[16]; 1392 union { 1393 u8 byte[8]; 1394 __le16 word[4]; 1395 __le32 dw[2]; 1396 } tkip_mic; 1397 __le32 next_frame_info; 1398 union { 1399 __le32 life_time; 1400 __le32 attempt; 1401 } stop_time; 1402 u8 supp_rates[2]; 1403 u8 rts_retry_limit; /*byte 50 */ 1404 u8 data_retry_limit; /*byte 51 */ 1405 union { 1406 __le16 pm_frame_timeout; 1407 __le16 attempt_duration; 1408 } timeout; 1409 1410 /* 1411 * Duration of EDCA burst Tx Opportunity, in 32-usec units. 1412 * Set this if txop time is not specified by HCCA protocol (e.g. by AP). 1413 */ 1414 __le16 driver_txop; 1415 ); 1416 1417 /* 1418 * MAC header goes here, followed by 2 bytes padding if MAC header 1419 * length is 26 or 30 bytes, followed by payload data 1420 */ 1421 struct ieee80211_hdr hdr[]; 1422 } __packed; 1423 static_assert(offsetof(struct il3945_tx_cmd, hdr) == sizeof(struct il3945_tx_cmd_hdr), 1424 "struct member likely outside of __struct_group()"); 1425 1426 /* 1427 * C_TX = 0x1c (response) 1428 */ 1429 struct il3945_tx_resp { 1430 u8 failure_rts; 1431 u8 failure_frame; 1432 u8 bt_kill_count; 1433 u8 rate; 1434 __le32 wireless_media_time; 1435 __le32 status; /* TX status */ 1436 } __packed; 1437 1438 /* 1439 * 4965 uCode updates these Tx attempt count values in host DRAM. 1440 * Used for managing Tx retries when expecting block-acks. 1441 * Driver should set these fields to 0. 1442 */ 1443 struct il_dram_scratch { 1444 u8 try_cnt; /* Tx attempts */ 1445 u8 bt_kill_cnt; /* Tx attempts blocked by Bluetooth device */ 1446 __le16 reserved; 1447 } __packed; 1448 1449 struct il_tx_cmd { 1450 /* New members MUST be added within the __struct_group() macro below. */ 1451 __struct_group(il_tx_cmd_hdr, __hdr, __packed, 1452 /* 1453 * MPDU byte count: 1454 * MAC header (24/26/30/32 bytes) + 2 bytes pad if 26/30 header size, 1455 * + 8 byte IV for CCM or TKIP (not used for WEP) 1456 * + Data payload 1457 * + 8-byte MIC (not used for CCM/WEP) 1458 * NOTE: Does not include Tx command bytes, post-MAC pad bytes, 1459 * MIC (CCM) 8 bytes, ICV (WEP/TKIP/CKIP) 4 bytes, CRC 4 bytes.i 1460 * Range: 14-2342 bytes. 1461 */ 1462 __le16 len; 1463 1464 /* 1465 * MPDU or MSDU byte count for next frame. 1466 * Used for fragmentation and bursting, but not 11n aggregation. 1467 * Same as "len", but for next frame. Set to 0 if not applicable. 1468 */ 1469 __le16 next_frame_len; 1470 1471 __le32 tx_flags; /* TX_CMD_FLG_* */ 1472 1473 /* uCode may modify this field of the Tx command (in host DRAM!). 1474 * Driver must also set dram_lsb_ptr and dram_msb_ptr in this cmd. */ 1475 struct il_dram_scratch scratch; 1476 1477 /* Rate for *all* Tx attempts, if TX_CMD_FLG_STA_RATE_MSK is cleared. */ 1478 __le32 rate_n_flags; /* RATE_MCS_* */ 1479 1480 /* Index of destination station in uCode's station table */ 1481 u8 sta_id; 1482 1483 /* Type of security encryption: CCM or TKIP */ 1484 u8 sec_ctl; /* TX_CMD_SEC_* */ 1485 1486 /* 1487 * Index into rate table (see C_TX_LINK_QUALITY_CMD) for initial 1488 * Tx attempt, if TX_CMD_FLG_STA_RATE_MSK is set. Normally "0" for 1489 * data frames, this field may be used to selectively reduce initial 1490 * rate (via non-0 value) for special frames (e.g. management), while 1491 * still supporting rate scaling for all frames. 1492 */ 1493 u8 initial_rate_idx; 1494 u8 reserved; 1495 u8 key[16]; 1496 __le16 next_frame_flags; 1497 __le16 reserved2; 1498 union { 1499 __le32 life_time; 1500 __le32 attempt; 1501 } stop_time; 1502 1503 /* Host DRAM physical address pointer to "scratch" in this command. 1504 * Must be dword aligned. "0" in dram_lsb_ptr disables usage. */ 1505 __le32 dram_lsb_ptr; 1506 u8 dram_msb_ptr; 1507 1508 u8 rts_retry_limit; /*byte 50 */ 1509 u8 data_retry_limit; /*byte 51 */ 1510 u8 tid_tspec; 1511 union { 1512 __le16 pm_frame_timeout; 1513 __le16 attempt_duration; 1514 } timeout; 1515 1516 /* 1517 * Duration of EDCA burst Tx Opportunity, in 32-usec units. 1518 * Set this if txop time is not specified by HCCA protocol (e.g. by AP). 1519 */ 1520 __le16 driver_txop; 1521 ); 1522 1523 /* 1524 * MAC header goes here, followed by 2 bytes padding if MAC header 1525 * length is 26 or 30 bytes, followed by payload data 1526 */ 1527 struct ieee80211_hdr hdr[]; 1528 } __packed; 1529 static_assert(offsetof(struct il_tx_cmd, hdr) == sizeof(struct il_tx_cmd_hdr), 1530 "struct member likely outside of __struct_group()"); 1531 1532 /* TX command response is sent after *3945* transmission attempts. 1533 * 1534 * NOTES: 1535 * 1536 * TX_STATUS_FAIL_NEXT_FRAG 1537 * 1538 * If the fragment flag in the MAC header for the frame being transmitted 1539 * is set and there is insufficient time to transmit the next frame, the 1540 * TX status will be returned with 'TX_STATUS_FAIL_NEXT_FRAG'. 1541 * 1542 * TX_STATUS_FIFO_UNDERRUN 1543 * 1544 * Indicates the host did not provide bytes to the FIFO fast enough while 1545 * a TX was in progress. 1546 * 1547 * TX_STATUS_FAIL_MGMNT_ABORT 1548 * 1549 * This status is only possible if the ABORT ON MGMT RX parameter was 1550 * set to true with the TX command. 1551 * 1552 * If the MSB of the status parameter is set then an abort sequence is 1553 * required. This sequence consists of the host activating the TX Abort 1554 * control line, and then waiting for the TX Abort command response. This 1555 * indicates that a the device is no longer in a transmit state, and that the 1556 * command FIFO has been cleared. The host must then deactivate the TX Abort 1557 * control line. Receiving is still allowed in this case. 1558 */ 1559 enum { 1560 TX_3945_STATUS_SUCCESS = 0x01, 1561 TX_3945_STATUS_DIRECT_DONE = 0x02, 1562 TX_3945_STATUS_FAIL_SHORT_LIMIT = 0x82, 1563 TX_3945_STATUS_FAIL_LONG_LIMIT = 0x83, 1564 TX_3945_STATUS_FAIL_FIFO_UNDERRUN = 0x84, 1565 TX_3945_STATUS_FAIL_MGMNT_ABORT = 0x85, 1566 TX_3945_STATUS_FAIL_NEXT_FRAG = 0x86, 1567 TX_3945_STATUS_FAIL_LIFE_EXPIRE = 0x87, 1568 TX_3945_STATUS_FAIL_DEST_PS = 0x88, 1569 TX_3945_STATUS_FAIL_ABORTED = 0x89, 1570 TX_3945_STATUS_FAIL_BT_RETRY = 0x8a, 1571 TX_3945_STATUS_FAIL_STA_INVALID = 0x8b, 1572 TX_3945_STATUS_FAIL_FRAG_DROPPED = 0x8c, 1573 TX_3945_STATUS_FAIL_TID_DISABLE = 0x8d, 1574 TX_3945_STATUS_FAIL_FRAME_FLUSHED = 0x8e, 1575 TX_3945_STATUS_FAIL_INSUFFICIENT_CF_POLL = 0x8f, 1576 TX_3945_STATUS_FAIL_TX_LOCKED = 0x90, 1577 TX_3945_STATUS_FAIL_NO_BEACON_ON_RADAR = 0x91, 1578 }; 1579 1580 /* 1581 * TX command response is sent after *4965* transmission attempts. 1582 * 1583 * both postpone and abort status are expected behavior from uCode. there is 1584 * no special operation required from driver; except for RFKILL_FLUSH, 1585 * which required tx flush host command to flush all the tx frames in queues 1586 */ 1587 enum { 1588 TX_STATUS_SUCCESS = 0x01, 1589 TX_STATUS_DIRECT_DONE = 0x02, 1590 /* postpone TX */ 1591 TX_STATUS_POSTPONE_DELAY = 0x40, 1592 TX_STATUS_POSTPONE_FEW_BYTES = 0x41, 1593 TX_STATUS_POSTPONE_QUIET_PERIOD = 0x43, 1594 TX_STATUS_POSTPONE_CALC_TTAK = 0x44, 1595 /* abort TX */ 1596 TX_STATUS_FAIL_INTERNAL_CROSSED_RETRY = 0x81, 1597 TX_STATUS_FAIL_SHORT_LIMIT = 0x82, 1598 TX_STATUS_FAIL_LONG_LIMIT = 0x83, 1599 TX_STATUS_FAIL_FIFO_UNDERRUN = 0x84, 1600 TX_STATUS_FAIL_DRAIN_FLOW = 0x85, 1601 TX_STATUS_FAIL_RFKILL_FLUSH = 0x86, 1602 TX_STATUS_FAIL_LIFE_EXPIRE = 0x87, 1603 TX_STATUS_FAIL_DEST_PS = 0x88, 1604 TX_STATUS_FAIL_HOST_ABORTED = 0x89, 1605 TX_STATUS_FAIL_BT_RETRY = 0x8a, 1606 TX_STATUS_FAIL_STA_INVALID = 0x8b, 1607 TX_STATUS_FAIL_FRAG_DROPPED = 0x8c, 1608 TX_STATUS_FAIL_TID_DISABLE = 0x8d, 1609 TX_STATUS_FAIL_FIFO_FLUSHED = 0x8e, 1610 TX_STATUS_FAIL_INSUFFICIENT_CF_POLL = 0x8f, 1611 TX_STATUS_FAIL_PASSIVE_NO_RX = 0x90, 1612 TX_STATUS_FAIL_NO_BEACON_ON_RADAR = 0x91, 1613 }; 1614 1615 #define TX_PACKET_MODE_REGULAR 0x0000 1616 #define TX_PACKET_MODE_BURST_SEQ 0x0100 1617 #define TX_PACKET_MODE_BURST_FIRST 0x0200 1618 1619 enum { 1620 TX_POWER_PA_NOT_ACTIVE = 0x0, 1621 }; 1622 1623 enum { 1624 TX_STATUS_MSK = 0x000000ff, /* bits 0:7 */ 1625 TX_STATUS_DELAY_MSK = 0x00000040, 1626 TX_STATUS_ABORT_MSK = 0x00000080, 1627 TX_PACKET_MODE_MSK = 0x0000ff00, /* bits 8:15 */ 1628 TX_FIFO_NUMBER_MSK = 0x00070000, /* bits 16:18 */ 1629 TX_RESERVED = 0x00780000, /* bits 19:22 */ 1630 TX_POWER_PA_DETECT_MSK = 0x7f800000, /* bits 23:30 */ 1631 TX_ABORT_REQUIRED_MSK = 0x80000000, /* bits 31:31 */ 1632 }; 1633 1634 /* ******************************* 1635 * TX aggregation status 1636 ******************************* */ 1637 1638 enum { 1639 AGG_TX_STATE_TRANSMITTED = 0x00, 1640 AGG_TX_STATE_UNDERRUN_MSK = 0x01, 1641 AGG_TX_STATE_FEW_BYTES_MSK = 0x04, 1642 AGG_TX_STATE_ABORT_MSK = 0x08, 1643 AGG_TX_STATE_LAST_SENT_TTL_MSK = 0x10, 1644 AGG_TX_STATE_LAST_SENT_TRY_CNT_MSK = 0x20, 1645 AGG_TX_STATE_SCD_QUERY_MSK = 0x80, 1646 AGG_TX_STATE_TEST_BAD_CRC32_MSK = 0x100, 1647 AGG_TX_STATE_RESPONSE_MSK = 0x1ff, 1648 AGG_TX_STATE_DUMP_TX_MSK = 0x200, 1649 AGG_TX_STATE_DELAY_TX_MSK = 0x400 1650 }; 1651 1652 #define AGG_TX_STATUS_MSK 0x00000fff /* bits 0:11 */ 1653 #define AGG_TX_TRY_MSK 0x0000f000 /* bits 12:15 */ 1654 1655 #define AGG_TX_STATE_LAST_SENT_MSK (AGG_TX_STATE_LAST_SENT_TTL_MSK | \ 1656 AGG_TX_STATE_LAST_SENT_TRY_CNT_MSK) 1657 1658 /* # tx attempts for first frame in aggregation */ 1659 #define AGG_TX_STATE_TRY_CNT_POS 12 1660 #define AGG_TX_STATE_TRY_CNT_MSK 0xf000 1661 1662 /* Command ID and sequence number of Tx command for this frame */ 1663 #define AGG_TX_STATE_SEQ_NUM_POS 16 1664 #define AGG_TX_STATE_SEQ_NUM_MSK 0xffff0000 1665 1666 /* 1667 * C_TX = 0x1c (response) 1668 * 1669 * This response may be in one of two slightly different formats, indicated 1670 * by the frame_count field: 1671 * 1672 * 1) No aggregation (frame_count == 1). This reports Tx results for 1673 * a single frame. Multiple attempts, at various bit rates, may have 1674 * been made for this frame. 1675 * 1676 * 2) Aggregation (frame_count > 1). This reports Tx results for 1677 * 2 or more frames that used block-acknowledge. All frames were 1678 * transmitted at same rate. Rate scaling may have been used if first 1679 * frame in this new agg block failed in previous agg block(s). 1680 * 1681 * Note that, for aggregation, ACK (block-ack) status is not delivered here; 1682 * block-ack has not been received by the time the 4965 device records 1683 * this status. 1684 * This status relates to reasons the tx might have been blocked or aborted 1685 * within the sending station (this 4965 device), rather than whether it was 1686 * received successfully by the destination station. 1687 */ 1688 struct agg_tx_status { 1689 __le16 status; 1690 __le16 sequence; 1691 } __packed; 1692 1693 struct il4965_tx_resp { 1694 u8 frame_count; /* 1 no aggregation, >1 aggregation */ 1695 u8 bt_kill_count; /* # blocked by bluetooth (unused for agg) */ 1696 u8 failure_rts; /* # failures due to unsuccessful RTS */ 1697 u8 failure_frame; /* # failures due to no ACK (unused for agg) */ 1698 1699 /* For non-agg: Rate at which frame was successful. 1700 * For agg: Rate at which all frames were transmitted. */ 1701 __le32 rate_n_flags; /* RATE_MCS_* */ 1702 1703 /* For non-agg: RTS + CTS + frame tx attempts time + ACK. 1704 * For agg: RTS + CTS + aggregation tx time + block-ack time. */ 1705 __le16 wireless_media_time; /* uSecs */ 1706 1707 __le16 reserved; 1708 __le32 pa_power1; /* RF power amplifier measurement (not used) */ 1709 __le32 pa_power2; 1710 1711 /* 1712 * For non-agg: frame status TX_STATUS_* 1713 * For agg: status of 1st frame, AGG_TX_STATE_*; other frame status 1714 * fields follow this one, up to frame_count. 1715 * Bit fields: 1716 * 11- 0: AGG_TX_STATE_* status code 1717 * 15-12: Retry count for 1st frame in aggregation (retries 1718 * occur if tx failed for this frame when it was a 1719 * member of a previous aggregation block). If rate 1720 * scaling is used, retry count indicates the rate 1721 * table entry used for all frames in the new agg. 1722 * 31-16: Sequence # for this frame's Tx cmd (not SSN!) 1723 */ 1724 union { 1725 __le32 status; 1726 DECLARE_FLEX_ARRAY(struct agg_tx_status, agg_status); /* for each agg frame */ 1727 } u; 1728 } __packed; 1729 1730 /* 1731 * N_COMPRESSED_BA = 0xc5 (response only, not a command) 1732 * 1733 * Reports Block-Acknowledge from recipient station 1734 */ 1735 struct il_compressed_ba_resp { 1736 __le32 sta_addr_lo32; 1737 __le16 sta_addr_hi16; 1738 __le16 reserved; 1739 1740 /* Index of recipient (BA-sending) station in uCode's station table */ 1741 u8 sta_id; 1742 u8 tid; 1743 __le16 seq_ctl; 1744 __le64 bitmap; 1745 __le16 scd_flow; 1746 __le16 scd_ssn; 1747 } __packed; 1748 1749 /* 1750 * C_TX_PWR_TBL = 0x97 (command, has simple generic response) 1751 * 1752 * See details under "TXPOWER" in 4965.h. 1753 */ 1754 1755 struct il3945_txpowertable_cmd { 1756 u8 band; /* 0: 5 GHz, 1: 2.4 GHz */ 1757 u8 reserved; 1758 __le16 channel; 1759 struct il3945_power_per_rate power[IL_MAX_RATES]; 1760 } __packed; 1761 1762 struct il4965_txpowertable_cmd { 1763 u8 band; /* 0: 5 GHz, 1: 2.4 GHz */ 1764 u8 reserved; 1765 __le16 channel; 1766 struct il4965_tx_power_db tx_power; 1767 } __packed; 1768 1769 /** 1770 * struct il3945_rate_scaling_cmd - Rate Scaling Command & Response 1771 * 1772 * C_RATE_SCALE = 0x47 (command, has simple generic response) 1773 * 1774 * NOTE: The table of rates passed to the uCode via the 1775 * RATE_SCALE command sets up the corresponding order of 1776 * rates used for all related commands, including rate 1777 * masks, etc. 1778 * 1779 * For example, if you set 9MB (PLCP 0x0f) as the first 1780 * rate in the rate table, the bit mask for that rate 1781 * when passed through ofdm_basic_rates on the C_RXON 1782 * command would be bit 0 (1 << 0) 1783 */ 1784 struct il3945_rate_scaling_info { 1785 __le16 rate_n_flags; 1786 u8 try_cnt; 1787 u8 next_rate_idx; 1788 } __packed; 1789 1790 struct il3945_rate_scaling_cmd { 1791 u8 table_id; 1792 u8 reserved[3]; 1793 struct il3945_rate_scaling_info table[IL_MAX_RATES]; 1794 } __packed; 1795 1796 /*RS_NEW_API: only TLC_RTS remains and moved to bit 0 */ 1797 #define LINK_QUAL_FLAGS_SET_STA_TLC_RTS_MSK (1 << 0) 1798 1799 /* # of EDCA prioritized tx fifos */ 1800 #define LINK_QUAL_AC_NUM AC_NUM 1801 1802 /* # entries in rate scale table to support Tx retries */ 1803 #define LINK_QUAL_MAX_RETRY_NUM 16 1804 1805 /* Tx antenna selection values */ 1806 #define LINK_QUAL_ANT_A_MSK (1 << 0) 1807 #define LINK_QUAL_ANT_B_MSK (1 << 1) 1808 #define LINK_QUAL_ANT_MSK (LINK_QUAL_ANT_A_MSK|LINK_QUAL_ANT_B_MSK) 1809 1810 /** 1811 * struct il_link_qual_general_params 1812 * 1813 * Used in C_TX_LINK_QUALITY_CMD 1814 */ 1815 struct il_link_qual_general_params { 1816 u8 flags; 1817 1818 /* No entries at or above this (driver chosen) idx contain MIMO */ 1819 u8 mimo_delimiter; 1820 1821 /* Best single antenna to use for single stream (legacy, SISO). */ 1822 u8 single_stream_ant_msk; /* LINK_QUAL_ANT_* */ 1823 1824 /* Best antennas to use for MIMO (unused for 4965, assumes both). */ 1825 u8 dual_stream_ant_msk; /* LINK_QUAL_ANT_* */ 1826 1827 /* 1828 * If driver needs to use different initial rates for different 1829 * EDCA QOS access categories (as implemented by tx fifos 0-3), 1830 * this table will set that up, by indicating the idxes in the 1831 * rs_table[LINK_QUAL_MAX_RETRY_NUM] rate table at which to start. 1832 * Otherwise, driver should set all entries to 0. 1833 * 1834 * Entry usage: 1835 * 0 = Background, 1 = Best Effort (normal), 2 = Video, 3 = Voice 1836 * TX FIFOs above 3 use same value (typically 0) as TX FIFO 3. 1837 */ 1838 u8 start_rate_idx[LINK_QUAL_AC_NUM]; 1839 } __packed; 1840 1841 #define LINK_QUAL_AGG_TIME_LIMIT_DEF (4000) /* 4 milliseconds */ 1842 #define LINK_QUAL_AGG_TIME_LIMIT_MAX (8000) 1843 #define LINK_QUAL_AGG_TIME_LIMIT_MIN (100) 1844 1845 #define LINK_QUAL_AGG_DISABLE_START_DEF (3) 1846 #define LINK_QUAL_AGG_DISABLE_START_MAX (255) 1847 #define LINK_QUAL_AGG_DISABLE_START_MIN (0) 1848 1849 #define LINK_QUAL_AGG_FRAME_LIMIT_DEF (31) 1850 #define LINK_QUAL_AGG_FRAME_LIMIT_MAX (63) 1851 #define LINK_QUAL_AGG_FRAME_LIMIT_MIN (0) 1852 1853 /** 1854 * struct il_link_qual_agg_params 1855 * 1856 * Used in C_TX_LINK_QUALITY_CMD 1857 */ 1858 struct il_link_qual_agg_params { 1859 1860 /* 1861 *Maximum number of uSec in aggregation. 1862 * default set to 4000 (4 milliseconds) if not configured in .cfg 1863 */ 1864 __le16 agg_time_limit; 1865 1866 /* 1867 * Number of Tx retries allowed for a frame, before that frame will 1868 * no longer be considered for the start of an aggregation sequence 1869 * (scheduler will then try to tx it as single frame). 1870 * Driver should set this to 3. 1871 */ 1872 u8 agg_dis_start_th; 1873 1874 /* 1875 * Maximum number of frames in aggregation. 1876 * 0 = no limit (default). 1 = no aggregation. 1877 * Other values = max # frames in aggregation. 1878 */ 1879 u8 agg_frame_cnt_limit; 1880 1881 __le32 reserved; 1882 } __packed; 1883 1884 /* 1885 * C_TX_LINK_QUALITY_CMD = 0x4e (command, has simple generic response) 1886 * 1887 * For 4965 devices only; 3945 uses C_RATE_SCALE. 1888 * 1889 * Each station in the 4965 device's internal station table has its own table 1890 * of 16 1891 * Tx rates and modulation modes (e.g. legacy/SISO/MIMO) for retrying Tx when 1892 * an ACK is not received. This command replaces the entire table for 1893 * one station. 1894 * 1895 * NOTE: Station must already be in 4965 device's station table. 1896 * Use C_ADD_STA. 1897 * 1898 * The rate scaling procedures described below work well. Of course, other 1899 * procedures are possible, and may work better for particular environments. 1900 * 1901 * 1902 * FILLING THE RATE TBL 1903 * 1904 * Given a particular initial rate and mode, as determined by the rate 1905 * scaling algorithm described below, the Linux driver uses the following 1906 * formula to fill the rs_table[LINK_QUAL_MAX_RETRY_NUM] rate table in the 1907 * Link Quality command: 1908 * 1909 * 1910 * 1) If using High-throughput (HT) (SISO or MIMO) initial rate: 1911 * a) Use this same initial rate for first 3 entries. 1912 * b) Find next lower available rate using same mode (SISO or MIMO), 1913 * use for next 3 entries. If no lower rate available, switch to 1914 * legacy mode (no HT40 channel, no MIMO, no short guard interval). 1915 * c) If using MIMO, set command's mimo_delimiter to number of entries 1916 * using MIMO (3 or 6). 1917 * d) After trying 2 HT rates, switch to legacy mode (no HT40 channel, 1918 * no MIMO, no short guard interval), at the next lower bit rate 1919 * (e.g. if second HT bit rate was 54, try 48 legacy), and follow 1920 * legacy procedure for remaining table entries. 1921 * 1922 * 2) If using legacy initial rate: 1923 * a) Use the initial rate for only one entry. 1924 * b) For each following entry, reduce the rate to next lower available 1925 * rate, until reaching the lowest available rate. 1926 * c) When reducing rate, also switch antenna selection. 1927 * d) Once lowest available rate is reached, repeat this rate until 1928 * rate table is filled (16 entries), switching antenna each entry. 1929 * 1930 * 1931 * ACCUMULATING HISTORY 1932 * 1933 * The rate scaling algorithm for 4965 devices, as implemented in Linux driver, 1934 * uses two sets of frame Tx success history: One for the current/active 1935 * modulation mode, and one for a speculative/search mode that is being 1936 * attempted. If the speculative mode turns out to be more effective (i.e. 1937 * actual transfer rate is better), then the driver continues to use the 1938 * speculative mode as the new current active mode. 1939 * 1940 * Each history set contains, separately for each possible rate, data for a 1941 * sliding win of the 62 most recent tx attempts at that rate. The data 1942 * includes a shifting bitmap of success(1)/failure(0), and sums of successful 1943 * and attempted frames, from which the driver can additionally calculate a 1944 * success ratio (success / attempted) and number of failures 1945 * (attempted - success), and control the size of the win (attempted). 1946 * The driver uses the bit map to remove successes from the success sum, as 1947 * the oldest tx attempts fall out of the win. 1948 * 1949 * When the 4965 device makes multiple tx attempts for a given frame, each 1950 * attempt might be at a different rate, and have different modulation 1951 * characteristics (e.g. antenna, fat channel, short guard interval), as set 1952 * up in the rate scaling table in the Link Quality command. The driver must 1953 * determine which rate table entry was used for each tx attempt, to determine 1954 * which rate-specific history to update, and record only those attempts that 1955 * match the modulation characteristics of the history set. 1956 * 1957 * When using block-ack (aggregation), all frames are transmitted at the same 1958 * rate, since there is no per-attempt acknowledgment from the destination 1959 * station. The Tx response struct il_tx_resp indicates the Tx rate in 1960 * rate_n_flags field. After receiving a block-ack, the driver can update 1961 * history for the entire block all at once. 1962 * 1963 * 1964 * FINDING BEST STARTING RATE: 1965 * 1966 * When working with a selected initial modulation mode (see below), the 1967 * driver attempts to find a best initial rate. The initial rate is the 1968 * first entry in the Link Quality command's rate table. 1969 * 1970 * 1) Calculate actual throughput (success ratio * expected throughput, see 1971 * table below) for current initial rate. Do this only if enough frames 1972 * have been attempted to make the value meaningful: at least 6 failed 1973 * tx attempts, or at least 8 successes. If not enough, don't try rate 1974 * scaling yet. 1975 * 1976 * 2) Find available rates adjacent to current initial rate. Available means: 1977 * a) supported by hardware && 1978 * b) supported by association && 1979 * c) within any constraints selected by user 1980 * 1981 * 3) Gather measured throughputs for adjacent rates. These might not have 1982 * enough history to calculate a throughput. That's okay, we might try 1983 * using one of them anyway! 1984 * 1985 * 4) Try decreasing rate if, for current rate: 1986 * a) success ratio is < 15% || 1987 * b) lower adjacent rate has better measured throughput || 1988 * c) higher adjacent rate has worse throughput, and lower is unmeasured 1989 * 1990 * As a sanity check, if decrease was determined above, leave rate 1991 * unchanged if: 1992 * a) lower rate unavailable 1993 * b) success ratio at current rate > 85% (very good) 1994 * c) current measured throughput is better than expected throughput 1995 * of lower rate (under perfect 100% tx conditions, see table below) 1996 * 1997 * 5) Try increasing rate if, for current rate: 1998 * a) success ratio is < 15% || 1999 * b) both adjacent rates' throughputs are unmeasured (try it!) || 2000 * b) higher adjacent rate has better measured throughput || 2001 * c) lower adjacent rate has worse throughput, and higher is unmeasured 2002 * 2003 * As a sanity check, if increase was determined above, leave rate 2004 * unchanged if: 2005 * a) success ratio at current rate < 70%. This is not particularly 2006 * good performance; higher rate is sure to have poorer success. 2007 * 2008 * 6) Re-evaluate the rate after each tx frame. If working with block- 2009 * acknowledge, history and stats may be calculated for the entire 2010 * block (including prior history that fits within the history wins), 2011 * before re-evaluation. 2012 * 2013 * FINDING BEST STARTING MODULATION MODE: 2014 * 2015 * After working with a modulation mode for a "while" (and doing rate scaling), 2016 * the driver searches for a new initial mode in an attempt to improve 2017 * throughput. The "while" is measured by numbers of attempted frames: 2018 * 2019 * For legacy mode, search for new mode after: 2020 * 480 successful frames, or 160 failed frames 2021 * For high-throughput modes (SISO or MIMO), search for new mode after: 2022 * 4500 successful frames, or 400 failed frames 2023 * 2024 * Mode switch possibilities are (3 for each mode): 2025 * 2026 * For legacy: 2027 * Change antenna, try SISO (if HT association), try MIMO (if HT association) 2028 * For SISO: 2029 * Change antenna, try MIMO, try shortened guard interval (SGI) 2030 * For MIMO: 2031 * Try SISO antenna A, SISO antenna B, try shortened guard interval (SGI) 2032 * 2033 * When trying a new mode, use the same bit rate as the old/current mode when 2034 * trying antenna switches and shortened guard interval. When switching to 2035 * SISO from MIMO or legacy, or to MIMO from SISO or legacy, use a rate 2036 * for which the expected throughput (under perfect conditions) is about the 2037 * same or slightly better than the actual measured throughput delivered by 2038 * the old/current mode. 2039 * 2040 * Actual throughput can be estimated by multiplying the expected throughput 2041 * by the success ratio (successful / attempted tx frames). Frame size is 2042 * not considered in this calculation; it assumes that frame size will average 2043 * out to be fairly consistent over several samples. The following are 2044 * metric values for expected throughput assuming 100% success ratio. 2045 * Only G band has support for CCK rates: 2046 * 2047 * RATE: 1 2 5 11 6 9 12 18 24 36 48 54 60 2048 * 2049 * G: 7 13 35 58 40 57 72 98 121 154 177 186 186 2050 * A: 0 0 0 0 40 57 72 98 121 154 177 186 186 2051 * SISO 20MHz: 0 0 0 0 42 42 76 102 124 159 183 193 202 2052 * SGI SISO 20MHz: 0 0 0 0 46 46 82 110 132 168 192 202 211 2053 * MIMO 20MHz: 0 0 0 0 74 74 123 155 179 214 236 244 251 2054 * SGI MIMO 20MHz: 0 0 0 0 81 81 131 164 188 222 243 251 257 2055 * SISO 40MHz: 0 0 0 0 77 77 127 160 184 220 242 250 257 2056 * SGI SISO 40MHz: 0 0 0 0 83 83 135 169 193 229 250 257 264 2057 * MIMO 40MHz: 0 0 0 0 123 123 182 214 235 264 279 285 289 2058 * SGI MIMO 40MHz: 0 0 0 0 131 131 191 222 242 270 284 289 293 2059 * 2060 * After the new mode has been tried for a short while (minimum of 6 failed 2061 * frames or 8 successful frames), compare success ratio and actual throughput 2062 * estimate of the new mode with the old. If either is better with the new 2063 * mode, continue to use the new mode. 2064 * 2065 * Continue comparing modes until all 3 possibilities have been tried. 2066 * If moving from legacy to HT, try all 3 possibilities from the new HT 2067 * mode. After trying all 3, a best mode is found. Continue to use this mode 2068 * for the longer "while" described above (e.g. 480 successful frames for 2069 * legacy), and then repeat the search process. 2070 * 2071 */ 2072 struct il_link_quality_cmd { 2073 2074 /* Index of destination/recipient station in uCode's station table */ 2075 u8 sta_id; 2076 u8 reserved1; 2077 __le16 control; /* not used */ 2078 struct il_link_qual_general_params general_params; 2079 struct il_link_qual_agg_params agg_params; 2080 2081 /* 2082 * Rate info; when using rate-scaling, Tx command's initial_rate_idx 2083 * specifies 1st Tx rate attempted, via idx into this table. 2084 * 4965 devices works its way through table when retrying Tx. 2085 */ 2086 struct { 2087 __le32 rate_n_flags; /* RATE_MCS_*, RATE_* */ 2088 } rs_table[LINK_QUAL_MAX_RETRY_NUM]; 2089 __le32 reserved2; 2090 } __packed; 2091 2092 /* 2093 * BT configuration enable flags: 2094 * bit 0 - 1: BT channel announcement enabled 2095 * 0: disable 2096 * bit 1 - 1: priority of BT device enabled 2097 * 0: disable 2098 */ 2099 #define BT_COEX_DISABLE (0x0) 2100 #define BT_ENABLE_CHANNEL_ANNOUNCE BIT(0) 2101 #define BT_ENABLE_PRIORITY BIT(1) 2102 2103 #define BT_COEX_ENABLE (BT_ENABLE_CHANNEL_ANNOUNCE | BT_ENABLE_PRIORITY) 2104 2105 #define BT_LEAD_TIME_DEF (0x1E) 2106 2107 #define BT_MAX_KILL_DEF (0x5) 2108 2109 /* 2110 * C_BT_CONFIG = 0x9b (command, has simple generic response) 2111 * 2112 * 3945 and 4965 devices support hardware handshake with Bluetooth device on 2113 * same platform. Bluetooth device alerts wireless device when it will Tx; 2114 * wireless device can delay or kill its own Tx to accommodate. 2115 */ 2116 struct il_bt_cmd { 2117 u8 flags; 2118 u8 lead_time; 2119 u8 max_kill; 2120 u8 reserved; 2121 __le32 kill_ack_mask; 2122 __le32 kill_cts_mask; 2123 } __packed; 2124 2125 /****************************************************************************** 2126 * (6) 2127 * Spectrum Management (802.11h) Commands, Responses, Notifications: 2128 * 2129 *****************************************************************************/ 2130 2131 /* 2132 * Spectrum Management 2133 */ 2134 #define MEASUREMENT_FILTER_FLAG (RXON_FILTER_PROMISC_MSK | \ 2135 RXON_FILTER_CTL2HOST_MSK | \ 2136 RXON_FILTER_ACCEPT_GRP_MSK | \ 2137 RXON_FILTER_DIS_DECRYPT_MSK | \ 2138 RXON_FILTER_DIS_GRP_DECRYPT_MSK | \ 2139 RXON_FILTER_ASSOC_MSK | \ 2140 RXON_FILTER_BCON_AWARE_MSK) 2141 2142 struct il_measure_channel { 2143 __le32 duration; /* measurement duration in extended beacon 2144 * format */ 2145 u8 channel; /* channel to measure */ 2146 u8 type; /* see enum il_measure_type */ 2147 __le16 reserved; 2148 } __packed; 2149 2150 /* 2151 * C_SPECTRUM_MEASUREMENT = 0x74 (command) 2152 */ 2153 struct il_spectrum_cmd { 2154 __le16 len; /* number of bytes starting from token */ 2155 u8 token; /* token id */ 2156 u8 id; /* measurement id -- 0 or 1 */ 2157 u8 origin; /* 0 = TGh, 1 = other, 2 = TGk */ 2158 u8 periodic; /* 1 = periodic */ 2159 __le16 path_loss_timeout; 2160 __le32 start_time; /* start time in extended beacon format */ 2161 __le32 reserved2; 2162 __le32 flags; /* rxon flags */ 2163 __le32 filter_flags; /* rxon filter flags */ 2164 __le16 channel_count; /* minimum 1, maximum 10 */ 2165 __le16 reserved3; 2166 struct il_measure_channel channels[10]; 2167 } __packed; 2168 2169 /* 2170 * C_SPECTRUM_MEASUREMENT = 0x74 (response) 2171 */ 2172 struct il_spectrum_resp { 2173 u8 token; 2174 u8 id; /* id of the prior command replaced, or 0xff */ 2175 __le16 status; /* 0 - command will be handled 2176 * 1 - cannot handle (conflicts with another 2177 * measurement) */ 2178 } __packed; 2179 2180 enum il_measurement_state { 2181 IL_MEASUREMENT_START = 0, 2182 IL_MEASUREMENT_STOP = 1, 2183 }; 2184 2185 enum il_measurement_status { 2186 IL_MEASUREMENT_OK = 0, 2187 IL_MEASUREMENT_CONCURRENT = 1, 2188 IL_MEASUREMENT_CSA_CONFLICT = 2, 2189 IL_MEASUREMENT_TGH_CONFLICT = 3, 2190 /* 4-5 reserved */ 2191 IL_MEASUREMENT_STOPPED = 6, 2192 IL_MEASUREMENT_TIMEOUT = 7, 2193 IL_MEASUREMENT_PERIODIC_FAILED = 8, 2194 }; 2195 2196 #define NUM_ELEMENTS_IN_HISTOGRAM 8 2197 2198 struct il_measurement_histogram { 2199 __le32 ofdm[NUM_ELEMENTS_IN_HISTOGRAM]; /* in 0.8usec counts */ 2200 __le32 cck[NUM_ELEMENTS_IN_HISTOGRAM]; /* in 1usec counts */ 2201 } __packed; 2202 2203 /* clear channel availability counters */ 2204 struct il_measurement_cca_counters { 2205 __le32 ofdm; 2206 __le32 cck; 2207 } __packed; 2208 2209 enum il_measure_type { 2210 IL_MEASURE_BASIC = (1 << 0), 2211 IL_MEASURE_CHANNEL_LOAD = (1 << 1), 2212 IL_MEASURE_HISTOGRAM_RPI = (1 << 2), 2213 IL_MEASURE_HISTOGRAM_NOISE = (1 << 3), 2214 IL_MEASURE_FRAME = (1 << 4), 2215 /* bits 5:6 are reserved */ 2216 IL_MEASURE_IDLE = (1 << 7), 2217 }; 2218 2219 /* 2220 * N_SPECTRUM_MEASUREMENT = 0x75 (notification only, not a command) 2221 */ 2222 struct il_spectrum_notification { 2223 u8 id; /* measurement id -- 0 or 1 */ 2224 u8 token; 2225 u8 channel_idx; /* idx in measurement channel list */ 2226 u8 state; /* 0 - start, 1 - stop */ 2227 __le32 start_time; /* lower 32-bits of TSF */ 2228 u8 band; /* 0 - 5.2GHz, 1 - 2.4GHz */ 2229 u8 channel; 2230 u8 type; /* see enum il_measurement_type */ 2231 u8 reserved1; 2232 /* NOTE: cca_ofdm, cca_cck, basic_type, and histogram are only only 2233 * valid if applicable for measurement type requested. */ 2234 __le32 cca_ofdm; /* cca fraction time in 40Mhz clock periods */ 2235 __le32 cca_cck; /* cca fraction time in 44Mhz clock periods */ 2236 __le32 cca_time; /* channel load time in usecs */ 2237 u8 basic_type; /* 0 - bss, 1 - ofdm preamble, 2 - 2238 * unidentified */ 2239 u8 reserved2[3]; 2240 struct il_measurement_histogram histogram; 2241 __le32 stop_time; /* lower 32-bits of TSF */ 2242 __le32 status; /* see il_measurement_status */ 2243 } __packed; 2244 2245 /****************************************************************************** 2246 * (7) 2247 * Power Management Commands, Responses, Notifications: 2248 * 2249 *****************************************************************************/ 2250 2251 /** 2252 * struct il_powertable_cmd - Power Table Command 2253 * @flags: See below: 2254 * 2255 * C_POWER_TBL = 0x77 (command, has simple generic response) 2256 * 2257 * PM allow: 2258 * bit 0 - '0' Driver not allow power management 2259 * '1' Driver allow PM (use rest of parameters) 2260 * 2261 * uCode send sleep notifications: 2262 * bit 1 - '0' Don't send sleep notification 2263 * '1' send sleep notification (SEND_PM_NOTIFICATION) 2264 * 2265 * Sleep over DTIM 2266 * bit 2 - '0' PM have to walk up every DTIM 2267 * '1' PM could sleep over DTIM till listen Interval. 2268 * 2269 * PCI power managed 2270 * bit 3 - '0' (PCI_CFG_LINK_CTRL & 0x1) 2271 * '1' !(PCI_CFG_LINK_CTRL & 0x1) 2272 * 2273 * Fast PD 2274 * bit 4 - '1' Put radio to sleep when receiving frame for others 2275 * 2276 * Force sleep Modes 2277 * bit 31/30- '00' use both mac/xtal sleeps 2278 * '01' force Mac sleep 2279 * '10' force xtal sleep 2280 * '11' Illegal set 2281 * 2282 * NOTE: if sleep_interval[SLEEP_INTRVL_TBL_SIZE-1] > DTIM period then 2283 * ucode assume sleep over DTIM is allowed and we don't need to wake up 2284 * for every DTIM. 2285 */ 2286 #define IL_POWER_VEC_SIZE 5 2287 2288 #define IL_POWER_DRIVER_ALLOW_SLEEP_MSK cpu_to_le16(BIT(0)) 2289 #define IL_POWER_SLEEP_OVER_DTIM_MSK cpu_to_le16(BIT(2)) 2290 #define IL_POWER_PCI_PM_MSK cpu_to_le16(BIT(3)) 2291 2292 struct il3945_powertable_cmd { 2293 __le16 flags; 2294 u8 reserved[2]; 2295 __le32 rx_data_timeout; 2296 __le32 tx_data_timeout; 2297 __le32 sleep_interval[IL_POWER_VEC_SIZE]; 2298 } __packed; 2299 2300 struct il_powertable_cmd { 2301 __le16 flags; 2302 u8 keep_alive_seconds; /* 3945 reserved */ 2303 u8 debug_flags; /* 3945 reserved */ 2304 __le32 rx_data_timeout; 2305 __le32 tx_data_timeout; 2306 __le32 sleep_interval[IL_POWER_VEC_SIZE]; 2307 __le32 keep_alive_beacons; 2308 } __packed; 2309 2310 /* 2311 * N_PM_SLEEP = 0x7A (notification only, not a command) 2312 * all devices identical. 2313 */ 2314 struct il_sleep_notification { 2315 u8 pm_sleep_mode; 2316 u8 pm_wakeup_src; 2317 __le16 reserved; 2318 __le32 sleep_time; 2319 __le32 tsf_low; 2320 __le32 bcon_timer; 2321 } __packed; 2322 2323 /* Sleep states. all devices identical. */ 2324 enum { 2325 IL_PM_NO_SLEEP = 0, 2326 IL_PM_SLP_MAC = 1, 2327 IL_PM_SLP_FULL_MAC_UNASSOCIATE = 2, 2328 IL_PM_SLP_FULL_MAC_CARD_STATE = 3, 2329 IL_PM_SLP_PHY = 4, 2330 IL_PM_SLP_REPENT = 5, 2331 IL_PM_WAKEUP_BY_TIMER = 6, 2332 IL_PM_WAKEUP_BY_DRIVER = 7, 2333 IL_PM_WAKEUP_BY_RFKILL = 8, 2334 /* 3 reserved */ 2335 IL_PM_NUM_OF_MODES = 12, 2336 }; 2337 2338 /* 2339 * N_CARD_STATE = 0xa1 (notification only, not a command) 2340 */ 2341 struct il_card_state_notif { 2342 __le32 flags; 2343 } __packed; 2344 2345 #define HW_CARD_DISABLED 0x01 2346 #define SW_CARD_DISABLED 0x02 2347 #define CT_CARD_DISABLED 0x04 2348 #define RXON_CARD_DISABLED 0x10 2349 2350 struct il_ct_kill_config { 2351 __le32 reserved; 2352 __le32 critical_temperature_M; 2353 __le32 critical_temperature_R; 2354 } __packed; 2355 2356 /****************************************************************************** 2357 * (8) 2358 * Scan Commands, Responses, Notifications: 2359 * 2360 *****************************************************************************/ 2361 2362 #define SCAN_CHANNEL_TYPE_PASSIVE cpu_to_le32(0) 2363 #define SCAN_CHANNEL_TYPE_ACTIVE cpu_to_le32(1) 2364 2365 /** 2366 * struct il_scan_channel - entry in C_SCAN channel table 2367 * 2368 * One for each channel in the scan list. 2369 * Each channel can independently select: 2370 * 1) SSID for directed active scans 2371 * 2) Txpower setting (for rate specified within Tx command) 2372 * 3) How long to stay on-channel (behavior may be modified by quiet_time, 2373 * quiet_plcp_th, good_CRC_th) 2374 * 2375 * To avoid uCode errors, make sure the following are true (see comments 2376 * under struct il_scan_cmd about max_out_time and quiet_time): 2377 * 1) If using passive_dwell (i.e. passive_dwell != 0): 2378 * active_dwell <= passive_dwell (< max_out_time if max_out_time != 0) 2379 * 2) quiet_time <= active_dwell 2380 * 3) If restricting off-channel time (i.e. max_out_time !=0): 2381 * passive_dwell < max_out_time 2382 * active_dwell < max_out_time 2383 */ 2384 struct il3945_scan_channel { 2385 /* 2386 * type is defined as: 2387 * 0:0 1 = active, 0 = passive 2388 * 1:4 SSID direct bit map; if a bit is set, then corresponding 2389 * SSID IE is transmitted in probe request. 2390 * 5:7 reserved 2391 */ 2392 u8 type; 2393 u8 channel; /* band is selected by il3945_scan_cmd "flags" field */ 2394 struct il3945_tx_power tpc; 2395 __le16 active_dwell; /* in 1024-uSec TU (time units), typ 5-50 */ 2396 __le16 passive_dwell; /* in 1024-uSec TU (time units), typ 20-500 */ 2397 } __packed; 2398 2399 /* set number of direct probes u8 type */ 2400 #define IL39_SCAN_PROBE_MASK(n) ((BIT(n) | (BIT(n) - BIT(1)))) 2401 2402 struct il_scan_channel { 2403 /* 2404 * type is defined as: 2405 * 0:0 1 = active, 0 = passive 2406 * 1:20 SSID direct bit map; if a bit is set, then corresponding 2407 * SSID IE is transmitted in probe request. 2408 * 21:31 reserved 2409 */ 2410 __le32 type; 2411 __le16 channel; /* band is selected by il_scan_cmd "flags" field */ 2412 u8 tx_gain; /* gain for analog radio */ 2413 u8 dsp_atten; /* gain for DSP */ 2414 __le16 active_dwell; /* in 1024-uSec TU (time units), typ 5-50 */ 2415 __le16 passive_dwell; /* in 1024-uSec TU (time units), typ 20-500 */ 2416 } __packed; 2417 2418 /* set number of direct probes __le32 type */ 2419 #define IL_SCAN_PROBE_MASK(n) cpu_to_le32((BIT(n) | (BIT(n) - BIT(1)))) 2420 2421 /** 2422 * struct il_ssid_ie - directed scan network information element 2423 * 2424 * Up to 20 of these may appear in C_SCAN (Note: Only 4 are in 2425 * 3945 SCAN api), selected by "type" bit field in struct il_scan_channel; 2426 * each channel may select different ssids from among the 20 (4) entries. 2427 * SSID IEs get transmitted in reverse order of entry. 2428 */ 2429 struct il_ssid_ie { 2430 u8 id; 2431 u8 len; 2432 u8 ssid[32]; 2433 } __packed; 2434 2435 #define PROBE_OPTION_MAX_3945 4 2436 #define PROBE_OPTION_MAX 20 2437 #define TX_CMD_LIFE_TIME_INFINITE cpu_to_le32(0xFFFFFFFF) 2438 #define IL_GOOD_CRC_TH_DISABLED 0 2439 #define IL_GOOD_CRC_TH_DEFAULT cpu_to_le16(1) 2440 #define IL_GOOD_CRC_TH_NEVER cpu_to_le16(0xffff) 2441 #define IL_MAX_SCAN_SIZE 1024 2442 #define IL_MAX_CMD_SIZE 4096 2443 2444 /* 2445 * C_SCAN = 0x80 (command) 2446 * 2447 * The hardware scan command is very powerful; the driver can set it up to 2448 * maintain (relatively) normal network traffic while doing a scan in the 2449 * background. The max_out_time and suspend_time control the ratio of how 2450 * long the device stays on an associated network channel ("service channel") 2451 * vs. how long it's away from the service channel, i.e. tuned to other channels 2452 * for scanning. 2453 * 2454 * max_out_time is the max time off-channel (in usec), and suspend_time 2455 * is how long (in "extended beacon" format) that the scan is "suspended" 2456 * after returning to the service channel. That is, suspend_time is the 2457 * time that we stay on the service channel, doing normal work, between 2458 * scan segments. The driver may set these parameters differently to support 2459 * scanning when associated vs. not associated, and light vs. heavy traffic 2460 * loads when associated. 2461 * 2462 * After receiving this command, the device's scan engine does the following; 2463 * 2464 * 1) Sends SCAN_START notification to driver 2465 * 2) Checks to see if it has time to do scan for one channel 2466 * 3) Sends NULL packet, with power-save (PS) bit set to 1, 2467 * to tell AP that we're going off-channel 2468 * 4) Tunes to first channel in scan list, does active or passive scan 2469 * 5) Sends SCAN_RESULT notification to driver 2470 * 6) Checks to see if it has time to do scan on *next* channel in list 2471 * 7) Repeats 4-6 until it no longer has time to scan the next channel 2472 * before max_out_time expires 2473 * 8) Returns to service channel 2474 * 9) Sends NULL packet with PS=0 to tell AP that we're back 2475 * 10) Stays on service channel until suspend_time expires 2476 * 11) Repeats entire process 2-10 until list is complete 2477 * 12) Sends SCAN_COMPLETE notification 2478 * 2479 * For fast, efficient scans, the scan command also has support for staying on 2480 * a channel for just a short time, if doing active scanning and getting no 2481 * responses to the transmitted probe request. This time is controlled by 2482 * quiet_time, and the number of received packets below which a channel is 2483 * considered "quiet" is controlled by quiet_plcp_threshold. 2484 * 2485 * For active scanning on channels that have regulatory restrictions against 2486 * blindly transmitting, the scan can listen before transmitting, to make sure 2487 * that there is already legitimate activity on the channel. If enough 2488 * packets are cleanly received on the channel (controlled by good_CRC_th, 2489 * typical value 1), the scan engine starts transmitting probe requests. 2490 * 2491 * Driver must use separate scan commands for 2.4 vs. 5 GHz bands. 2492 * 2493 * To avoid uCode errors, see timing restrictions described under 2494 * struct il_scan_channel. 2495 */ 2496 2497 struct il3945_scan_cmd { 2498 __le16 len; 2499 u8 reserved0; 2500 u8 channel_count; /* # channels in channel list */ 2501 __le16 quiet_time; /* dwell only this # millisecs on quiet channel 2502 * (only for active scan) */ 2503 __le16 quiet_plcp_th; /* quiet chnl is < this # pkts (typ. 1) */ 2504 __le16 good_CRC_th; /* passive -> active promotion threshold */ 2505 __le16 reserved1; 2506 __le32 max_out_time; /* max usec to be away from associated (service) 2507 * channel */ 2508 __le32 suspend_time; /* pause scan this long (in "extended beacon 2509 * format") when returning to service channel: 2510 * 3945; 31:24 # beacons, 19:0 additional usec, 2511 * 4965; 31:22 # beacons, 21:0 additional usec. 2512 */ 2513 __le32 flags; /* RXON_FLG_* */ 2514 __le32 filter_flags; /* RXON_FILTER_* */ 2515 2516 /* For active scans (set to all-0s for passive scans). 2517 * Does not include payload. Must specify Tx rate; no rate scaling. */ 2518 struct il3945_tx_cmd_hdr tx_cmd; 2519 2520 /* For directed active scans (set to all-0s otherwise) */ 2521 struct il_ssid_ie direct_scan[PROBE_OPTION_MAX_3945]; 2522 2523 /* 2524 * Probe request frame, followed by channel list. 2525 * 2526 * Size of probe request frame is specified by byte count in tx_cmd. 2527 * Channel list follows immediately after probe request frame. 2528 * Number of channels in list is specified by channel_count. 2529 * Each channel in list is of type: 2530 * 2531 * struct il3945_scan_channel channels[0]; 2532 * 2533 * NOTE: Only one band of channels can be scanned per pass. You 2534 * must not mix 2.4GHz channels and 5.2GHz channels, and you must wait 2535 * for one scan to complete (i.e. receive N_SCAN_COMPLETE) 2536 * before requesting another scan. 2537 */ 2538 u8 data[]; 2539 } __packed; 2540 2541 struct il_scan_cmd { 2542 __le16 len; 2543 u8 reserved0; 2544 u8 channel_count; /* # channels in channel list */ 2545 __le16 quiet_time; /* dwell only this # millisecs on quiet channel 2546 * (only for active scan) */ 2547 __le16 quiet_plcp_th; /* quiet chnl is < this # pkts (typ. 1) */ 2548 __le16 good_CRC_th; /* passive -> active promotion threshold */ 2549 __le16 rx_chain; /* RXON_RX_CHAIN_* */ 2550 __le32 max_out_time; /* max usec to be away from associated (service) 2551 * channel */ 2552 __le32 suspend_time; /* pause scan this long (in "extended beacon 2553 * format") when returning to service chnl: 2554 * 3945; 31:24 # beacons, 19:0 additional usec, 2555 * 4965; 31:22 # beacons, 21:0 additional usec. 2556 */ 2557 __le32 flags; /* RXON_FLG_* */ 2558 __le32 filter_flags; /* RXON_FILTER_* */ 2559 2560 /* For active scans (set to all-0s for passive scans). 2561 * Does not include payload. Must specify Tx rate; no rate scaling. */ 2562 struct il_tx_cmd_hdr tx_cmd; 2563 2564 /* For directed active scans (set to all-0s otherwise) */ 2565 struct il_ssid_ie direct_scan[PROBE_OPTION_MAX]; 2566 2567 /* 2568 * Probe request frame, followed by channel list. 2569 * 2570 * Size of probe request frame is specified by byte count in tx_cmd. 2571 * Channel list follows immediately after probe request frame. 2572 * Number of channels in list is specified by channel_count. 2573 * Each channel in list is of type: 2574 * 2575 * struct il_scan_channel channels[0]; 2576 * 2577 * NOTE: Only one band of channels can be scanned per pass. You 2578 * must not mix 2.4GHz channels and 5.2GHz channels, and you must wait 2579 * for one scan to complete (i.e. receive N_SCAN_COMPLETE) 2580 * before requesting another scan. 2581 */ 2582 u8 data[]; 2583 } __packed; 2584 2585 /* Can abort will notify by complete notification with abort status. */ 2586 #define CAN_ABORT_STATUS cpu_to_le32(0x1) 2587 /* complete notification statuses */ 2588 #define ABORT_STATUS 0x2 2589 2590 /* 2591 * C_SCAN = 0x80 (response) 2592 */ 2593 struct il_scanreq_notification { 2594 __le32 status; /* 1: okay, 2: cannot fulfill request */ 2595 } __packed; 2596 2597 /* 2598 * N_SCAN_START = 0x82 (notification only, not a command) 2599 */ 2600 struct il_scanstart_notification { 2601 __le32 tsf_low; 2602 __le32 tsf_high; 2603 __le32 beacon_timer; 2604 u8 channel; 2605 u8 band; 2606 u8 reserved[2]; 2607 __le32 status; 2608 } __packed; 2609 2610 #define SCAN_OWNER_STATUS 0x1 2611 #define MEASURE_OWNER_STATUS 0x2 2612 2613 #define IL_PROBE_STATUS_OK 0 2614 #define IL_PROBE_STATUS_TX_FAILED BIT(0) 2615 /* error statuses combined with TX_FAILED */ 2616 #define IL_PROBE_STATUS_FAIL_TTL BIT(1) 2617 #define IL_PROBE_STATUS_FAIL_BT BIT(2) 2618 2619 #define NUMBER_OF_STATS 1 /* first __le32 is good CRC */ 2620 /* 2621 * N_SCAN_RESULTS = 0x83 (notification only, not a command) 2622 */ 2623 struct il_scanresults_notification { 2624 u8 channel; 2625 u8 band; 2626 u8 probe_status; 2627 u8 num_probe_not_sent; /* not enough time to send */ 2628 __le32 tsf_low; 2629 __le32 tsf_high; 2630 __le32 stats[NUMBER_OF_STATS]; 2631 } __packed; 2632 2633 /* 2634 * N_SCAN_COMPLETE = 0x84 (notification only, not a command) 2635 */ 2636 struct il_scancomplete_notification { 2637 u8 scanned_channels; 2638 u8 status; 2639 u8 last_channel; 2640 __le32 tsf_low; 2641 __le32 tsf_high; 2642 } __packed; 2643 2644 /****************************************************************************** 2645 * (9) 2646 * IBSS/AP Commands and Notifications: 2647 * 2648 *****************************************************************************/ 2649 2650 enum il_ibss_manager { 2651 IL_NOT_IBSS_MANAGER = 0, 2652 IL_IBSS_MANAGER = 1, 2653 }; 2654 2655 /* 2656 * N_BEACON = 0x90 (notification only, not a command) 2657 */ 2658 2659 struct il3945_beacon_notif { 2660 struct il3945_tx_resp beacon_notify_hdr; 2661 __le32 low_tsf; 2662 __le32 high_tsf; 2663 __le32 ibss_mgr_status; 2664 } __packed; 2665 2666 struct il4965_beacon_notif { 2667 struct il4965_tx_resp beacon_notify_hdr; 2668 __le32 low_tsf; 2669 __le32 high_tsf; 2670 __le32 ibss_mgr_status; 2671 } __packed; 2672 2673 /* 2674 * C_TX_BEACON= 0x91 (command, has simple generic response) 2675 */ 2676 2677 struct il3945_tx_beacon_cmd { 2678 struct il3945_tx_cmd_hdr tx; 2679 __le16 tim_idx; 2680 u8 tim_size; 2681 u8 reserved1; 2682 struct ieee80211_hdr frame[]; /* beacon frame */ 2683 } __packed; 2684 2685 struct il_tx_beacon_cmd { 2686 struct il_tx_cmd_hdr tx; 2687 __le16 tim_idx; 2688 u8 tim_size; 2689 u8 reserved1; 2690 struct ieee80211_hdr frame[]; /* beacon frame */ 2691 } __packed; 2692 2693 /****************************************************************************** 2694 * (10) 2695 * Statistics Commands and Notifications: 2696 * 2697 *****************************************************************************/ 2698 2699 #define IL_TEMP_CONVERT 260 2700 2701 #define SUP_RATE_11A_MAX_NUM_CHANNELS 8 2702 #define SUP_RATE_11B_MAX_NUM_CHANNELS 4 2703 #define SUP_RATE_11G_MAX_NUM_CHANNELS 12 2704 2705 /* Used for passing to driver number of successes and failures per rate */ 2706 struct rate_histogram { 2707 union { 2708 __le32 a[SUP_RATE_11A_MAX_NUM_CHANNELS]; 2709 __le32 b[SUP_RATE_11B_MAX_NUM_CHANNELS]; 2710 __le32 g[SUP_RATE_11G_MAX_NUM_CHANNELS]; 2711 } success; 2712 union { 2713 __le32 a[SUP_RATE_11A_MAX_NUM_CHANNELS]; 2714 __le32 b[SUP_RATE_11B_MAX_NUM_CHANNELS]; 2715 __le32 g[SUP_RATE_11G_MAX_NUM_CHANNELS]; 2716 } failed; 2717 } __packed; 2718 2719 /* stats command response */ 2720 2721 struct iwl39_stats_rx_phy { 2722 __le32 ina_cnt; 2723 __le32 fina_cnt; 2724 __le32 plcp_err; 2725 __le32 crc32_err; 2726 __le32 overrun_err; 2727 __le32 early_overrun_err; 2728 __le32 crc32_good; 2729 __le32 false_alarm_cnt; 2730 __le32 fina_sync_err_cnt; 2731 __le32 sfd_timeout; 2732 __le32 fina_timeout; 2733 __le32 unresponded_rts; 2734 __le32 rxe_frame_limit_overrun; 2735 __le32 sent_ack_cnt; 2736 __le32 sent_cts_cnt; 2737 } __packed; 2738 2739 struct iwl39_stats_rx_non_phy { 2740 __le32 bogus_cts; /* CTS received when not expecting CTS */ 2741 __le32 bogus_ack; /* ACK received when not expecting ACK */ 2742 __le32 non_bssid_frames; /* number of frames with BSSID that 2743 * doesn't belong to the STA BSSID */ 2744 __le32 filtered_frames; /* count frames that were dumped in the 2745 * filtering process */ 2746 __le32 non_channel_beacons; /* beacons with our bss id but not on 2747 * our serving channel */ 2748 } __packed; 2749 2750 struct iwl39_stats_rx { 2751 struct iwl39_stats_rx_phy ofdm; 2752 struct iwl39_stats_rx_phy cck; 2753 struct iwl39_stats_rx_non_phy general; 2754 } __packed; 2755 2756 struct iwl39_stats_tx { 2757 __le32 preamble_cnt; 2758 __le32 rx_detected_cnt; 2759 __le32 bt_prio_defer_cnt; 2760 __le32 bt_prio_kill_cnt; 2761 __le32 few_bytes_cnt; 2762 __le32 cts_timeout; 2763 __le32 ack_timeout; 2764 __le32 expected_ack_cnt; 2765 __le32 actual_ack_cnt; 2766 } __packed; 2767 2768 struct stats_dbg { 2769 __le32 burst_check; 2770 __le32 burst_count; 2771 __le32 wait_for_silence_timeout_cnt; 2772 __le32 reserved[3]; 2773 } __packed; 2774 2775 struct iwl39_stats_div { 2776 __le32 tx_on_a; 2777 __le32 tx_on_b; 2778 __le32 exec_time; 2779 __le32 probe_time; 2780 } __packed; 2781 2782 struct iwl39_stats_general { 2783 __le32 temperature; 2784 struct stats_dbg dbg; 2785 __le32 sleep_time; 2786 __le32 slots_out; 2787 __le32 slots_idle; 2788 __le32 ttl_timestamp; 2789 struct iwl39_stats_div div; 2790 } __packed; 2791 2792 struct stats_rx_phy { 2793 __le32 ina_cnt; 2794 __le32 fina_cnt; 2795 __le32 plcp_err; 2796 __le32 crc32_err; 2797 __le32 overrun_err; 2798 __le32 early_overrun_err; 2799 __le32 crc32_good; 2800 __le32 false_alarm_cnt; 2801 __le32 fina_sync_err_cnt; 2802 __le32 sfd_timeout; 2803 __le32 fina_timeout; 2804 __le32 unresponded_rts; 2805 __le32 rxe_frame_limit_overrun; 2806 __le32 sent_ack_cnt; 2807 __le32 sent_cts_cnt; 2808 __le32 sent_ba_rsp_cnt; 2809 __le32 dsp_self_kill; 2810 __le32 mh_format_err; 2811 __le32 re_acq_main_rssi_sum; 2812 __le32 reserved3; 2813 } __packed; 2814 2815 struct stats_rx_ht_phy { 2816 __le32 plcp_err; 2817 __le32 overrun_err; 2818 __le32 early_overrun_err; 2819 __le32 crc32_good; 2820 __le32 crc32_err; 2821 __le32 mh_format_err; 2822 __le32 agg_crc32_good; 2823 __le32 agg_mpdu_cnt; 2824 __le32 agg_cnt; 2825 __le32 unsupport_mcs; 2826 } __packed; 2827 2828 #define INTERFERENCE_DATA_AVAILABLE cpu_to_le32(1) 2829 2830 struct stats_rx_non_phy { 2831 __le32 bogus_cts; /* CTS received when not expecting CTS */ 2832 __le32 bogus_ack; /* ACK received when not expecting ACK */ 2833 __le32 non_bssid_frames; /* number of frames with BSSID that 2834 * doesn't belong to the STA BSSID */ 2835 __le32 filtered_frames; /* count frames that were dumped in the 2836 * filtering process */ 2837 __le32 non_channel_beacons; /* beacons with our bss id but not on 2838 * our serving channel */ 2839 __le32 channel_beacons; /* beacons with our bss id and in our 2840 * serving channel */ 2841 __le32 num_missed_bcon; /* number of missed beacons */ 2842 __le32 adc_rx_saturation_time; /* count in 0.8us units the time the 2843 * ADC was in saturation */ 2844 __le32 ina_detection_search_time; /* total time (in 0.8us) searched 2845 * for INA */ 2846 __le32 beacon_silence_rssi_a; /* RSSI silence after beacon frame */ 2847 __le32 beacon_silence_rssi_b; /* RSSI silence after beacon frame */ 2848 __le32 beacon_silence_rssi_c; /* RSSI silence after beacon frame */ 2849 __le32 interference_data_flag; /* flag for interference data 2850 * availability. 1 when data is 2851 * available. */ 2852 __le32 channel_load; /* counts RX Enable time in uSec */ 2853 __le32 dsp_false_alarms; /* DSP false alarm (both OFDM 2854 * and CCK) counter */ 2855 __le32 beacon_rssi_a; 2856 __le32 beacon_rssi_b; 2857 __le32 beacon_rssi_c; 2858 __le32 beacon_energy_a; 2859 __le32 beacon_energy_b; 2860 __le32 beacon_energy_c; 2861 } __packed; 2862 2863 struct stats_rx { 2864 struct stats_rx_phy ofdm; 2865 struct stats_rx_phy cck; 2866 struct stats_rx_non_phy general; 2867 struct stats_rx_ht_phy ofdm_ht; 2868 } __packed; 2869 2870 /** 2871 * struct stats_tx_power - current tx power 2872 * 2873 * @ant_a: current tx power on chain a in 1/2 dB step 2874 * @ant_b: current tx power on chain b in 1/2 dB step 2875 * @ant_c: current tx power on chain c in 1/2 dB step 2876 */ 2877 struct stats_tx_power { 2878 u8 ant_a; 2879 u8 ant_b; 2880 u8 ant_c; 2881 u8 reserved; 2882 } __packed; 2883 2884 struct stats_tx_non_phy_agg { 2885 __le32 ba_timeout; 2886 __le32 ba_reschedule_frames; 2887 __le32 scd_query_agg_frame_cnt; 2888 __le32 scd_query_no_agg; 2889 __le32 scd_query_agg; 2890 __le32 scd_query_mismatch; 2891 __le32 frame_not_ready; 2892 __le32 underrun; 2893 __le32 bt_prio_kill; 2894 __le32 rx_ba_rsp_cnt; 2895 } __packed; 2896 2897 struct stats_tx { 2898 __le32 preamble_cnt; 2899 __le32 rx_detected_cnt; 2900 __le32 bt_prio_defer_cnt; 2901 __le32 bt_prio_kill_cnt; 2902 __le32 few_bytes_cnt; 2903 __le32 cts_timeout; 2904 __le32 ack_timeout; 2905 __le32 expected_ack_cnt; 2906 __le32 actual_ack_cnt; 2907 __le32 dump_msdu_cnt; 2908 __le32 burst_abort_next_frame_mismatch_cnt; 2909 __le32 burst_abort_missing_next_frame_cnt; 2910 __le32 cts_timeout_collision; 2911 __le32 ack_or_ba_timeout_collision; 2912 struct stats_tx_non_phy_agg agg; 2913 2914 __le32 reserved1; 2915 } __packed; 2916 2917 struct stats_div { 2918 __le32 tx_on_a; 2919 __le32 tx_on_b; 2920 __le32 exec_time; 2921 __le32 probe_time; 2922 __le32 reserved1; 2923 __le32 reserved2; 2924 } __packed; 2925 2926 struct stats_general_common { 2927 __le32 temperature; /* radio temperature */ 2928 struct stats_dbg dbg; 2929 __le32 sleep_time; 2930 __le32 slots_out; 2931 __le32 slots_idle; 2932 __le32 ttl_timestamp; 2933 struct stats_div div; 2934 __le32 rx_enable_counter; 2935 /* 2936 * num_of_sos_states: 2937 * count the number of times we have to re-tune 2938 * in order to get out of bad PHY status 2939 */ 2940 __le32 num_of_sos_states; 2941 } __packed; 2942 2943 struct stats_general { 2944 struct stats_general_common common; 2945 __le32 reserved2; 2946 __le32 reserved3; 2947 } __packed; 2948 2949 #define UCODE_STATS_CLEAR_MSK (0x1 << 0) 2950 #define UCODE_STATS_FREQUENCY_MSK (0x1 << 1) 2951 #define UCODE_STATS_NARROW_BAND_MSK (0x1 << 2) 2952 2953 /* 2954 * C_STATS = 0x9c, 2955 * all devices identical. 2956 * 2957 * This command triggers an immediate response containing uCode stats. 2958 * The response is in the same format as N_STATS 0x9d, below. 2959 * 2960 * If the CLEAR_STATS configuration flag is set, uCode will clear its 2961 * internal copy of the stats (counters) after issuing the response. 2962 * This flag does not affect N_STATSs after beacons (see below). 2963 * 2964 * If the DISABLE_NOTIF configuration flag is set, uCode will not issue 2965 * N_STATSs after received beacons (see below). This flag 2966 * does not affect the response to the C_STATS 0x9c itself. 2967 */ 2968 #define IL_STATS_CONF_CLEAR_STATS cpu_to_le32(0x1) /* see above */ 2969 #define IL_STATS_CONF_DISABLE_NOTIF cpu_to_le32(0x2) /* see above */ 2970 struct il_stats_cmd { 2971 __le32 configuration_flags; /* IL_STATS_CONF_* */ 2972 } __packed; 2973 2974 /* 2975 * N_STATS = 0x9d (notification only, not a command) 2976 * 2977 * By default, uCode issues this notification after receiving a beacon 2978 * while associated. To disable this behavior, set DISABLE_NOTIF flag in the 2979 * C_STATS 0x9c, above. 2980 * 2981 * Statistics counters continue to increment beacon after beacon, but are 2982 * cleared when changing channels or when driver issues C_STATS 2983 * 0x9c with CLEAR_STATS bit set (see above). 2984 * 2985 * uCode also issues this notification during scans. uCode clears stats 2986 * appropriately so that each notification contains stats for only the 2987 * one channel that has just been scanned. 2988 */ 2989 #define STATS_REPLY_FLG_BAND_24G_MSK cpu_to_le32(0x2) 2990 #define STATS_REPLY_FLG_HT40_MODE_MSK cpu_to_le32(0x8) 2991 2992 struct il3945_notif_stats { 2993 __le32 flag; 2994 struct iwl39_stats_rx rx; 2995 struct iwl39_stats_tx tx; 2996 struct iwl39_stats_general general; 2997 } __packed; 2998 2999 struct il_notif_stats { 3000 __le32 flag; 3001 struct stats_rx rx; 3002 struct stats_tx tx; 3003 struct stats_general general; 3004 } __packed; 3005 3006 /* 3007 * N_MISSED_BEACONS = 0xa2 (notification only, not a command) 3008 * 3009 * uCode send N_MISSED_BEACONS to driver when detect beacon missed 3010 * in regardless of how many missed beacons, which mean when driver receive the 3011 * notification, inside the command, it can find all the beacons information 3012 * which include number of total missed beacons, number of consecutive missed 3013 * beacons, number of beacons received and number of beacons expected to 3014 * receive. 3015 * 3016 * If uCode detected consecutive_missed_beacons > 5, it will reset the radio 3017 * in order to bring the radio/PHY back to working state; which has no relation 3018 * to when driver will perform sensitivity calibration. 3019 * 3020 * Driver should set it own missed_beacon_threshold to decide when to perform 3021 * sensitivity calibration based on number of consecutive missed beacons in 3022 * order to improve overall performance, especially in noisy environment. 3023 * 3024 */ 3025 3026 #define IL_MISSED_BEACON_THRESHOLD_MIN (1) 3027 #define IL_MISSED_BEACON_THRESHOLD_DEF (5) 3028 #define IL_MISSED_BEACON_THRESHOLD_MAX IL_MISSED_BEACON_THRESHOLD_DEF 3029 3030 struct il_missed_beacon_notif { 3031 __le32 consecutive_missed_beacons; 3032 __le32 total_missed_becons; 3033 __le32 num_expected_beacons; 3034 __le32 num_recvd_beacons; 3035 } __packed; 3036 3037 /****************************************************************************** 3038 * (11) 3039 * Rx Calibration Commands: 3040 * 3041 * With the uCode used for open source drivers, most Tx calibration (except 3042 * for Tx Power) and most Rx calibration is done by uCode during the 3043 * "initialize" phase of uCode boot. Driver must calibrate only: 3044 * 3045 * 1) Tx power (depends on temperature), described elsewhere 3046 * 2) Receiver gain balance (optimize MIMO, and detect disconnected antennas) 3047 * 3) Receiver sensitivity (to optimize signal detection) 3048 * 3049 *****************************************************************************/ 3050 3051 /** 3052 * C_SENSITIVITY = 0xa8 (command, has simple generic response) 3053 * 3054 * This command sets up the Rx signal detector for a sensitivity level that 3055 * is high enough to lock onto all signals within the associated network, 3056 * but low enough to ignore signals that are below a certain threshold, so as 3057 * not to have too many "false alarms". False alarms are signals that the 3058 * Rx DSP tries to lock onto, but then discards after determining that they 3059 * are noise. 3060 * 3061 * The optimum number of false alarms is between 5 and 50 per 200 TUs 3062 * (200 * 1024 uSecs, i.e. 204.8 milliseconds) of actual Rx time (i.e. 3063 * time listening, not transmitting). Driver must adjust sensitivity so that 3064 * the ratio of actual false alarms to actual Rx time falls within this range. 3065 * 3066 * While associated, uCode delivers N_STATSs after each 3067 * received beacon. These provide information to the driver to analyze the 3068 * sensitivity. Don't analyze stats that come in from scanning, or any 3069 * other non-associated-network source. Pertinent stats include: 3070 * 3071 * From "general" stats (struct stats_rx_non_phy): 3072 * 3073 * (beacon_energy_[abc] & 0x0FF00) >> 8 (unsigned, higher value is lower level) 3074 * Measure of energy of desired signal. Used for establishing a level 3075 * below which the device does not detect signals. 3076 * 3077 * (beacon_silence_rssi_[abc] & 0x0FF00) >> 8 (unsigned, units in dB) 3078 * Measure of background noise in silent period after beacon. 3079 * 3080 * channel_load 3081 * uSecs of actual Rx time during beacon period (varies according to 3082 * how much time was spent transmitting). 3083 * 3084 * From "cck" and "ofdm" stats (struct stats_rx_phy), separately: 3085 * 3086 * false_alarm_cnt 3087 * Signal locks abandoned early (before phy-level header). 3088 * 3089 * plcp_err 3090 * Signal locks abandoned late (during phy-level header). 3091 * 3092 * NOTE: Both false_alarm_cnt and plcp_err increment monotonically from 3093 * beacon to beacon, i.e. each value is an accumulation of all errors 3094 * before and including the latest beacon. Values will wrap around to 0 3095 * after counting up to 2^32 - 1. Driver must differentiate vs. 3096 * previous beacon's values to determine # false alarms in the current 3097 * beacon period. 3098 * 3099 * Total number of false alarms = false_alarms + plcp_errs 3100 * 3101 * For OFDM, adjust the following table entries in struct il_sensitivity_cmd 3102 * (notice that the start points for OFDM are at or close to settings for 3103 * maximum sensitivity): 3104 * 3105 * START / MIN / MAX 3106 * HD_AUTO_CORR32_X1_TH_ADD_MIN_IDX 90 / 85 / 120 3107 * HD_AUTO_CORR32_X1_TH_ADD_MIN_MRC_IDX 170 / 170 / 210 3108 * HD_AUTO_CORR32_X4_TH_ADD_MIN_IDX 105 / 105 / 140 3109 * HD_AUTO_CORR32_X4_TH_ADD_MIN_MRC_IDX 220 / 220 / 270 3110 * 3111 * If actual rate of OFDM false alarms (+ plcp_errors) is too high 3112 * (greater than 50 for each 204.8 msecs listening), reduce sensitivity 3113 * by *adding* 1 to all 4 of the table entries above, up to the max for 3114 * each entry. Conversely, if false alarm rate is too low (less than 5 3115 * for each 204.8 msecs listening), *subtract* 1 from each entry to 3116 * increase sensitivity. 3117 * 3118 * For CCK sensitivity, keep track of the following: 3119 * 3120 * 1). 20-beacon history of maximum background noise, indicated by 3121 * (beacon_silence_rssi_[abc] & 0x0FF00), units in dB, across the 3122 * 3 receivers. For any given beacon, the "silence reference" is 3123 * the maximum of last 60 samples (20 beacons * 3 receivers). 3124 * 3125 * 2). 10-beacon history of strongest signal level, as indicated 3126 * by (beacon_energy_[abc] & 0x0FF00) >> 8, across the 3 receivers, 3127 * i.e. the strength of the signal through the best receiver at the 3128 * moment. These measurements are "upside down", with lower values 3129 * for stronger signals, so max energy will be *minimum* value. 3130 * 3131 * Then for any given beacon, the driver must determine the *weakest* 3132 * of the strongest signals; this is the minimum level that needs to be 3133 * successfully detected, when using the best receiver at the moment. 3134 * "Max cck energy" is the maximum (higher value means lower energy!) 3135 * of the last 10 minima. Once this is determined, driver must add 3136 * a little margin by adding "6" to it. 3137 * 3138 * 3). Number of consecutive beacon periods with too few false alarms. 3139 * Reset this to 0 at the first beacon period that falls within the 3140 * "good" range (5 to 50 false alarms per 204.8 milliseconds rx). 3141 * 3142 * Then, adjust the following CCK table entries in struct il_sensitivity_cmd 3143 * (notice that the start points for CCK are at maximum sensitivity): 3144 * 3145 * START / MIN / MAX 3146 * HD_AUTO_CORR40_X4_TH_ADD_MIN_IDX 125 / 125 / 200 3147 * HD_AUTO_CORR40_X4_TH_ADD_MIN_MRC_IDX 200 / 200 / 400 3148 * HD_MIN_ENERGY_CCK_DET_IDX 100 / 0 / 100 3149 * 3150 * If actual rate of CCK false alarms (+ plcp_errors) is too high 3151 * (greater than 50 for each 204.8 msecs listening), method for reducing 3152 * sensitivity is: 3153 * 3154 * 1) *Add* 3 to value in HD_AUTO_CORR40_X4_TH_ADD_MIN_MRC_IDX, 3155 * up to max 400. 3156 * 3157 * 2) If current value in HD_AUTO_CORR40_X4_TH_ADD_MIN_IDX is < 160, 3158 * sensitivity has been reduced a significant amount; bring it up to 3159 * a moderate 161. Otherwise, *add* 3, up to max 200. 3160 * 3161 * 3) a) If current value in HD_AUTO_CORR40_X4_TH_ADD_MIN_IDX is > 160, 3162 * sensitivity has been reduced only a moderate or small amount; 3163 * *subtract* 2 from value in HD_MIN_ENERGY_CCK_DET_IDX, 3164 * down to min 0. Otherwise (if gain has been significantly reduced), 3165 * don't change the HD_MIN_ENERGY_CCK_DET_IDX value. 3166 * 3167 * b) Save a snapshot of the "silence reference". 3168 * 3169 * If actual rate of CCK false alarms (+ plcp_errors) is too low 3170 * (less than 5 for each 204.8 msecs listening), method for increasing 3171 * sensitivity is used only if: 3172 * 3173 * 1a) Previous beacon did not have too many false alarms 3174 * 1b) AND difference between previous "silence reference" and current 3175 * "silence reference" (prev - current) is 2 or more, 3176 * OR 2) 100 or more consecutive beacon periods have had rate of 3177 * less than 5 false alarms per 204.8 milliseconds rx time. 3178 * 3179 * Method for increasing sensitivity: 3180 * 3181 * 1) *Subtract* 3 from value in HD_AUTO_CORR40_X4_TH_ADD_MIN_IDX, 3182 * down to min 125. 3183 * 3184 * 2) *Subtract* 3 from value in HD_AUTO_CORR40_X4_TH_ADD_MIN_MRC_IDX, 3185 * down to min 200. 3186 * 3187 * 3) *Add* 2 to value in HD_MIN_ENERGY_CCK_DET_IDX, up to max 100. 3188 * 3189 * If actual rate of CCK false alarms (+ plcp_errors) is within good range 3190 * (between 5 and 50 for each 204.8 msecs listening): 3191 * 3192 * 1) Save a snapshot of the silence reference. 3193 * 3194 * 2) If previous beacon had too many CCK false alarms (+ plcp_errors), 3195 * give some extra margin to energy threshold by *subtracting* 8 3196 * from value in HD_MIN_ENERGY_CCK_DET_IDX. 3197 * 3198 * For all cases (too few, too many, good range), make sure that the CCK 3199 * detection threshold (energy) is below the energy level for robust 3200 * detection over the past 10 beacon periods, the "Max cck energy". 3201 * Lower values mean higher energy; this means making sure that the value 3202 * in HD_MIN_ENERGY_CCK_DET_IDX is at or *above* "Max cck energy". 3203 * 3204 */ 3205 3206 /* 3207 * Table entries in C_SENSITIVITY (struct il_sensitivity_cmd) 3208 */ 3209 #define HD_TBL_SIZE (11) /* number of entries */ 3210 #define HD_MIN_ENERGY_CCK_DET_IDX (0) /* table idxes */ 3211 #define HD_MIN_ENERGY_OFDM_DET_IDX (1) 3212 #define HD_AUTO_CORR32_X1_TH_ADD_MIN_IDX (2) 3213 #define HD_AUTO_CORR32_X1_TH_ADD_MIN_MRC_IDX (3) 3214 #define HD_AUTO_CORR40_X4_TH_ADD_MIN_MRC_IDX (4) 3215 #define HD_AUTO_CORR32_X4_TH_ADD_MIN_IDX (5) 3216 #define HD_AUTO_CORR32_X4_TH_ADD_MIN_MRC_IDX (6) 3217 #define HD_BARKER_CORR_TH_ADD_MIN_IDX (7) 3218 #define HD_BARKER_CORR_TH_ADD_MIN_MRC_IDX (8) 3219 #define HD_AUTO_CORR40_X4_TH_ADD_MIN_IDX (9) 3220 #define HD_OFDM_ENERGY_TH_IN_IDX (10) 3221 3222 /* Control field in struct il_sensitivity_cmd */ 3223 #define C_SENSITIVITY_CONTROL_DEFAULT_TBL cpu_to_le16(0) 3224 #define C_SENSITIVITY_CONTROL_WORK_TBL cpu_to_le16(1) 3225 3226 /** 3227 * struct il_sensitivity_cmd 3228 * @control: (1) updates working table, (0) updates default table 3229 * @table: energy threshold values, use HD_* as idx into table 3230 * 3231 * Always use "1" in "control" to update uCode's working table and DSP. 3232 */ 3233 struct il_sensitivity_cmd { 3234 __le16 control; /* always use "1" */ 3235 __le16 table[HD_TBL_SIZE]; /* use HD_* as idx */ 3236 } __packed; 3237 3238 /** 3239 * C_PHY_CALIBRATION = 0xb0 (command, has simple generic response) 3240 * 3241 * This command sets the relative gains of 4965 device's 3 radio receiver chains. 3242 * 3243 * After the first association, driver should accumulate signal and noise 3244 * stats from the N_STATSs that follow the first 20 3245 * beacons from the associated network (don't collect stats that come 3246 * in from scanning, or any other non-network source). 3247 * 3248 * DISCONNECTED ANTENNA: 3249 * 3250 * Driver should determine which antennas are actually connected, by comparing 3251 * average beacon signal levels for the 3 Rx chains. Accumulate (add) the 3252 * following values over 20 beacons, one accumulator for each of the chains 3253 * a/b/c, from struct stats_rx_non_phy: 3254 * 3255 * beacon_rssi_[abc] & 0x0FF (unsigned, units in dB) 3256 * 3257 * Find the strongest signal from among a/b/c. Compare the other two to the 3258 * strongest. If any signal is more than 15 dB (times 20, unless you 3259 * divide the accumulated values by 20) below the strongest, the driver 3260 * considers that antenna to be disconnected, and should not try to use that 3261 * antenna/chain for Rx or Tx. If both A and B seem to be disconnected, 3262 * driver should declare the stronger one as connected, and attempt to use it 3263 * (A and B are the only 2 Tx chains!). 3264 * 3265 * 3266 * RX BALANCE: 3267 * 3268 * Driver should balance the 3 receivers (but just the ones that are connected 3269 * to antennas, see above) for gain, by comparing the average signal levels 3270 * detected during the silence after each beacon (background noise). 3271 * Accumulate (add) the following values over 20 beacons, one accumulator for 3272 * each of the chains a/b/c, from struct stats_rx_non_phy: 3273 * 3274 * beacon_silence_rssi_[abc] & 0x0FF (unsigned, units in dB) 3275 * 3276 * Find the weakest background noise level from among a/b/c. This Rx chain 3277 * will be the reference, with 0 gain adjustment. Attenuate other channels by 3278 * finding noise difference: 3279 * 3280 * (accum_noise[i] - accum_noise[reference]) / 30 3281 * 3282 * The "30" adjusts the dB in the 20 accumulated samples to units of 1.5 dB. 3283 * For use in diff_gain_[abc] fields of struct il_calibration_cmd, the 3284 * driver should limit the difference results to a range of 0-3 (0-4.5 dB), 3285 * and set bit 2 to indicate "reduce gain". The value for the reference 3286 * (weakest) chain should be "0". 3287 * 3288 * diff_gain_[abc] bit fields: 3289 * 2: (1) reduce gain, (0) increase gain 3290 * 1-0: amount of gain, units of 1.5 dB 3291 */ 3292 3293 /* Phy calibration command for series */ 3294 /* The default calibrate table size if not specified by firmware */ 3295 #define IL_DEFAULT_STANDARD_PHY_CALIBRATE_TBL_SIZE 18 3296 enum { 3297 IL_PHY_CALIBRATE_DIFF_GAIN_CMD = 7, 3298 IL_MAX_STANDARD_PHY_CALIBRATE_TBL_SIZE = 19, 3299 }; 3300 3301 #define IL_MAX_PHY_CALIBRATE_TBL_SIZE (253) 3302 3303 struct il_calib_hdr { 3304 u8 op_code; 3305 u8 first_group; 3306 u8 groups_num; 3307 u8 data_valid; 3308 } __packed; 3309 3310 /* IL_PHY_CALIBRATE_DIFF_GAIN_CMD (7) */ 3311 struct il_calib_diff_gain_cmd { 3312 struct il_calib_hdr hdr; 3313 s8 diff_gain_a; /* see above */ 3314 s8 diff_gain_b; 3315 s8 diff_gain_c; 3316 u8 reserved1; 3317 } __packed; 3318 3319 /****************************************************************************** 3320 * (12) 3321 * Miscellaneous Commands: 3322 * 3323 *****************************************************************************/ 3324 3325 /* 3326 * LEDs Command & Response 3327 * C_LEDS = 0x48 (command, has simple generic response) 3328 * 3329 * For each of 3 possible LEDs (Activity/Link/Tech, selected by "id" field), 3330 * this command turns it on or off, or sets up a periodic blinking cycle. 3331 */ 3332 struct il_led_cmd { 3333 __le32 interval; /* "interval" in uSec */ 3334 u8 id; /* 1: Activity, 2: Link, 3: Tech */ 3335 u8 off; /* # intervals off while blinking; 3336 * "0", with >0 "on" value, turns LED on */ 3337 u8 on; /* # intervals on while blinking; 3338 * "0", regardless of "off", turns LED off */ 3339 u8 reserved; 3340 } __packed; 3341 3342 /****************************************************************************** 3343 * (13) 3344 * Union of all expected notifications/responses: 3345 * 3346 *****************************************************************************/ 3347 3348 #define IL_RX_FRAME_SIZE_MSK 0x00003fff 3349 3350 struct il_rx_pkt { 3351 /* 3352 * The first 4 bytes of the RX frame header contain both the RX frame 3353 * size and some flags. 3354 * Bit fields: 3355 * 31: flag flush RB request 3356 * 30: flag ignore TC (terminal counter) request 3357 * 29: flag fast IRQ request 3358 * 28-14: Reserved 3359 * 13-00: RX frame size 3360 */ 3361 __le32 len_n_flags; 3362 struct il_cmd_header hdr; 3363 union { 3364 struct il3945_rx_frame rx_frame; 3365 struct il3945_tx_resp tx_resp; 3366 struct il3945_beacon_notif beacon_status; 3367 3368 struct il_alive_resp alive_frame; 3369 struct il_spectrum_notification spectrum_notif; 3370 struct il_csa_notification csa_notif; 3371 struct il_error_resp err_resp; 3372 struct il_card_state_notif card_state_notif; 3373 struct il_add_sta_resp add_sta; 3374 struct il_rem_sta_resp rem_sta; 3375 struct il_sleep_notification sleep_notif; 3376 struct il_spectrum_resp spectrum; 3377 struct il_notif_stats stats; 3378 struct il_compressed_ba_resp compressed_ba; 3379 struct il_missed_beacon_notif missed_beacon; 3380 __le32 status; 3381 DECLARE_FLEX_ARRAY(u8, raw); 3382 } u; 3383 } __packed; 3384 3385 #endif /* __il_commands_h__ */ 3386