1 // SPDX-License-Identifier: GPL-2.0-only 2 /****************************************************************************** 3 * 4 * Copyright(c) 2003 - 2011 Intel Corporation. All rights reserved. 5 * 6 * Contact Information: 7 * Intel Linux Wireless <ilw@linux.intel.com> 8 * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 9 * 10 *****************************************************************************/ 11 12 #include <linux/kernel.h> 13 #include <linux/module.h> 14 #include <linux/slab.h> 15 #include <linux/pci.h> 16 #include <linux/dma-mapping.h> 17 #include <linux/delay.h> 18 #include <linux/sched.h> 19 #include <linux/skbuff.h> 20 #include <linux/netdevice.h> 21 #include <linux/firmware.h> 22 #include <linux/etherdevice.h> 23 #include <asm/unaligned.h> 24 #include <net/mac80211.h> 25 26 #include "common.h" 27 #include "3945.h" 28 29 /* Send led command */ 30 static int 31 il3945_send_led_cmd(struct il_priv *il, struct il_led_cmd *led_cmd) 32 { 33 struct il_host_cmd cmd = { 34 .id = C_LEDS, 35 .len = sizeof(struct il_led_cmd), 36 .data = led_cmd, 37 .flags = CMD_ASYNC, 38 .callback = NULL, 39 }; 40 41 return il_send_cmd(il, &cmd); 42 } 43 44 #define IL_DECLARE_RATE_INFO(r, ip, in, rp, rn, pp, np) \ 45 [RATE_##r##M_IDX] = { RATE_##r##M_PLCP, \ 46 RATE_##r##M_IEEE, \ 47 RATE_##ip##M_IDX, \ 48 RATE_##in##M_IDX, \ 49 RATE_##rp##M_IDX, \ 50 RATE_##rn##M_IDX, \ 51 RATE_##pp##M_IDX, \ 52 RATE_##np##M_IDX, \ 53 RATE_##r##M_IDX_TBL, \ 54 RATE_##ip##M_IDX_TBL } 55 56 /* 57 * Parameter order: 58 * rate, prev rate, next rate, prev tgg rate, next tgg rate 59 * 60 * If there isn't a valid next or previous rate then INV is used which 61 * maps to RATE_INVALID 62 * 63 */ 64 const struct il3945_rate_info il3945_rates[RATE_COUNT_3945] = { 65 IL_DECLARE_RATE_INFO(1, INV, 2, INV, 2, INV, 2), /* 1mbps */ 66 IL_DECLARE_RATE_INFO(2, 1, 5, 1, 5, 1, 5), /* 2mbps */ 67 IL_DECLARE_RATE_INFO(5, 2, 6, 2, 11, 2, 11), /*5.5mbps */ 68 IL_DECLARE_RATE_INFO(11, 9, 12, 5, 12, 5, 18), /* 11mbps */ 69 IL_DECLARE_RATE_INFO(6, 5, 9, 5, 11, 5, 11), /* 6mbps */ 70 IL_DECLARE_RATE_INFO(9, 6, 11, 5, 11, 5, 11), /* 9mbps */ 71 IL_DECLARE_RATE_INFO(12, 11, 18, 11, 18, 11, 18), /* 12mbps */ 72 IL_DECLARE_RATE_INFO(18, 12, 24, 12, 24, 11, 24), /* 18mbps */ 73 IL_DECLARE_RATE_INFO(24, 18, 36, 18, 36, 18, 36), /* 24mbps */ 74 IL_DECLARE_RATE_INFO(36, 24, 48, 24, 48, 24, 48), /* 36mbps */ 75 IL_DECLARE_RATE_INFO(48, 36, 54, 36, 54, 36, 54), /* 48mbps */ 76 IL_DECLARE_RATE_INFO(54, 48, INV, 48, INV, 48, INV), /* 54mbps */ 77 }; 78 79 static inline u8 80 il3945_get_prev_ieee_rate(u8 rate_idx) 81 { 82 u8 rate = il3945_rates[rate_idx].prev_ieee; 83 84 if (rate == RATE_INVALID) 85 rate = rate_idx; 86 return rate; 87 } 88 89 /* 1 = enable the il3945_disable_events() function */ 90 #define IL_EVT_DISABLE (0) 91 #define IL_EVT_DISABLE_SIZE (1532/32) 92 93 /* 94 * il3945_disable_events - Disable selected events in uCode event log 95 * 96 * Disable an event by writing "1"s into "disable" 97 * bitmap in SRAM. Bit position corresponds to Event # (id/type). 98 * Default values of 0 enable uCode events to be logged. 99 * Use for only special debugging. This function is just a placeholder as-is, 100 * you'll need to provide the special bits! ... 101 * ... and set IL_EVT_DISABLE to 1. */ 102 void 103 il3945_disable_events(struct il_priv *il) 104 { 105 int i; 106 u32 base; /* SRAM address of event log header */ 107 u32 disable_ptr; /* SRAM address of event-disable bitmap array */ 108 u32 array_size; /* # of u32 entries in array */ 109 static const u32 evt_disable[IL_EVT_DISABLE_SIZE] = { 110 0x00000000, /* 31 - 0 Event id numbers */ 111 0x00000000, /* 63 - 32 */ 112 0x00000000, /* 95 - 64 */ 113 0x00000000, /* 127 - 96 */ 114 0x00000000, /* 159 - 128 */ 115 0x00000000, /* 191 - 160 */ 116 0x00000000, /* 223 - 192 */ 117 0x00000000, /* 255 - 224 */ 118 0x00000000, /* 287 - 256 */ 119 0x00000000, /* 319 - 288 */ 120 0x00000000, /* 351 - 320 */ 121 0x00000000, /* 383 - 352 */ 122 0x00000000, /* 415 - 384 */ 123 0x00000000, /* 447 - 416 */ 124 0x00000000, /* 479 - 448 */ 125 0x00000000, /* 511 - 480 */ 126 0x00000000, /* 543 - 512 */ 127 0x00000000, /* 575 - 544 */ 128 0x00000000, /* 607 - 576 */ 129 0x00000000, /* 639 - 608 */ 130 0x00000000, /* 671 - 640 */ 131 0x00000000, /* 703 - 672 */ 132 0x00000000, /* 735 - 704 */ 133 0x00000000, /* 767 - 736 */ 134 0x00000000, /* 799 - 768 */ 135 0x00000000, /* 831 - 800 */ 136 0x00000000, /* 863 - 832 */ 137 0x00000000, /* 895 - 864 */ 138 0x00000000, /* 927 - 896 */ 139 0x00000000, /* 959 - 928 */ 140 0x00000000, /* 991 - 960 */ 141 0x00000000, /* 1023 - 992 */ 142 0x00000000, /* 1055 - 1024 */ 143 0x00000000, /* 1087 - 1056 */ 144 0x00000000, /* 1119 - 1088 */ 145 0x00000000, /* 1151 - 1120 */ 146 0x00000000, /* 1183 - 1152 */ 147 0x00000000, /* 1215 - 1184 */ 148 0x00000000, /* 1247 - 1216 */ 149 0x00000000, /* 1279 - 1248 */ 150 0x00000000, /* 1311 - 1280 */ 151 0x00000000, /* 1343 - 1312 */ 152 0x00000000, /* 1375 - 1344 */ 153 0x00000000, /* 1407 - 1376 */ 154 0x00000000, /* 1439 - 1408 */ 155 0x00000000, /* 1471 - 1440 */ 156 0x00000000, /* 1503 - 1472 */ 157 }; 158 159 base = le32_to_cpu(il->card_alive.log_event_table_ptr); 160 if (!il3945_hw_valid_rtc_data_addr(base)) { 161 IL_ERR("Invalid event log pointer 0x%08X\n", base); 162 return; 163 } 164 165 disable_ptr = il_read_targ_mem(il, base + (4 * sizeof(u32))); 166 array_size = il_read_targ_mem(il, base + (5 * sizeof(u32))); 167 168 if (IL_EVT_DISABLE && array_size == IL_EVT_DISABLE_SIZE) { 169 D_INFO("Disabling selected uCode log events at 0x%x\n", 170 disable_ptr); 171 for (i = 0; i < IL_EVT_DISABLE_SIZE; i++) 172 il_write_targ_mem(il, disable_ptr + (i * sizeof(u32)), 173 evt_disable[i]); 174 175 } else { 176 D_INFO("Selected uCode log events may be disabled\n"); 177 D_INFO(" by writing \"1\"s into disable bitmap\n"); 178 D_INFO(" in SRAM at 0x%x, size %d u32s\n", disable_ptr, 179 array_size); 180 } 181 182 } 183 184 static int 185 il3945_hwrate_to_plcp_idx(u8 plcp) 186 { 187 int idx; 188 189 for (idx = 0; idx < RATE_COUNT_3945; idx++) 190 if (il3945_rates[idx].plcp == plcp) 191 return idx; 192 return -1; 193 } 194 195 #ifdef CONFIG_IWLEGACY_DEBUG 196 #define TX_STATUS_ENTRY(x) case TX_3945_STATUS_FAIL_ ## x: return #x 197 198 static const char * 199 il3945_get_tx_fail_reason(u32 status) 200 { 201 switch (status & TX_STATUS_MSK) { 202 case TX_3945_STATUS_SUCCESS: 203 return "SUCCESS"; 204 TX_STATUS_ENTRY(SHORT_LIMIT); 205 TX_STATUS_ENTRY(LONG_LIMIT); 206 TX_STATUS_ENTRY(FIFO_UNDERRUN); 207 TX_STATUS_ENTRY(MGMNT_ABORT); 208 TX_STATUS_ENTRY(NEXT_FRAG); 209 TX_STATUS_ENTRY(LIFE_EXPIRE); 210 TX_STATUS_ENTRY(DEST_PS); 211 TX_STATUS_ENTRY(ABORTED); 212 TX_STATUS_ENTRY(BT_RETRY); 213 TX_STATUS_ENTRY(STA_INVALID); 214 TX_STATUS_ENTRY(FRAG_DROPPED); 215 TX_STATUS_ENTRY(TID_DISABLE); 216 TX_STATUS_ENTRY(FRAME_FLUSHED); 217 TX_STATUS_ENTRY(INSUFFICIENT_CF_POLL); 218 TX_STATUS_ENTRY(TX_LOCKED); 219 TX_STATUS_ENTRY(NO_BEACON_ON_RADAR); 220 } 221 222 return "UNKNOWN"; 223 } 224 #else 225 static inline const char * 226 il3945_get_tx_fail_reason(u32 status) 227 { 228 return ""; 229 } 230 #endif 231 232 /* 233 * get ieee prev rate from rate scale table. 234 * for A and B mode we need to overright prev 235 * value 236 */ 237 int 238 il3945_rs_next_rate(struct il_priv *il, int rate) 239 { 240 int next_rate = il3945_get_prev_ieee_rate(rate); 241 242 switch (il->band) { 243 case NL80211_BAND_5GHZ: 244 if (rate == RATE_12M_IDX) 245 next_rate = RATE_9M_IDX; 246 else if (rate == RATE_6M_IDX) 247 next_rate = RATE_6M_IDX; 248 break; 249 case NL80211_BAND_2GHZ: 250 if (!(il->_3945.sta_supp_rates & IL_OFDM_RATES_MASK) && 251 il_is_associated(il)) { 252 if (rate == RATE_11M_IDX) 253 next_rate = RATE_5M_IDX; 254 } 255 break; 256 257 default: 258 break; 259 } 260 261 return next_rate; 262 } 263 264 /* 265 * il3945_tx_queue_reclaim - Reclaim Tx queue entries already Tx'd 266 * 267 * When FW advances 'R' idx, all entries between old and new 'R' idx 268 * need to be reclaimed. As result, some free space forms. If there is 269 * enough free space (> low mark), wake the stack that feeds us. 270 */ 271 static void 272 il3945_tx_queue_reclaim(struct il_priv *il, int txq_id, int idx) 273 { 274 struct il_tx_queue *txq = &il->txq[txq_id]; 275 struct il_queue *q = &txq->q; 276 struct sk_buff *skb; 277 278 BUG_ON(txq_id == IL39_CMD_QUEUE_NUM); 279 280 for (idx = il_queue_inc_wrap(idx, q->n_bd); q->read_ptr != idx; 281 q->read_ptr = il_queue_inc_wrap(q->read_ptr, q->n_bd)) { 282 283 skb = txq->skbs[txq->q.read_ptr]; 284 ieee80211_tx_status_irqsafe(il->hw, skb); 285 txq->skbs[txq->q.read_ptr] = NULL; 286 il->ops->txq_free_tfd(il, txq); 287 } 288 289 if (il_queue_space(q) > q->low_mark && txq_id >= 0 && 290 txq_id != IL39_CMD_QUEUE_NUM && il->mac80211_registered) 291 il_wake_queue(il, txq); 292 } 293 294 /* 295 * il3945_hdl_tx - Handle Tx response 296 */ 297 static void 298 il3945_hdl_tx(struct il_priv *il, struct il_rx_buf *rxb) 299 { 300 struct il_rx_pkt *pkt = rxb_addr(rxb); 301 u16 sequence = le16_to_cpu(pkt->hdr.sequence); 302 int txq_id = SEQ_TO_QUEUE(sequence); 303 int idx = SEQ_TO_IDX(sequence); 304 struct il_tx_queue *txq = &il->txq[txq_id]; 305 struct ieee80211_tx_info *info; 306 struct il3945_tx_resp *tx_resp = (void *)&pkt->u.raw[0]; 307 u32 status = le32_to_cpu(tx_resp->status); 308 int rate_idx; 309 int fail; 310 311 if (idx >= txq->q.n_bd || il_queue_used(&txq->q, idx) == 0) { 312 IL_ERR("Read idx for DMA queue txq_id (%d) idx %d " 313 "is out of range [0-%d] %d %d\n", txq_id, idx, 314 txq->q.n_bd, txq->q.write_ptr, txq->q.read_ptr); 315 return; 316 } 317 318 /* 319 * Firmware will not transmit frame on passive channel, if it not yet 320 * received some valid frame on that channel. When this error happen 321 * we have to wait until firmware will unblock itself i.e. when we 322 * note received beacon or other frame. We unblock queues in 323 * il3945_pass_packet_to_mac80211 or in il_mac_bss_info_changed. 324 */ 325 if (unlikely((status & TX_STATUS_MSK) == TX_STATUS_FAIL_PASSIVE_NO_RX) && 326 il->iw_mode == NL80211_IFTYPE_STATION) { 327 il_stop_queues_by_reason(il, IL_STOP_REASON_PASSIVE); 328 D_INFO("Stopped queues - RX waiting on passive channel\n"); 329 } 330 331 txq->time_stamp = jiffies; 332 info = IEEE80211_SKB_CB(txq->skbs[txq->q.read_ptr]); 333 ieee80211_tx_info_clear_status(info); 334 335 /* Fill the MRR chain with some info about on-chip retransmissions */ 336 rate_idx = il3945_hwrate_to_plcp_idx(tx_resp->rate); 337 if (info->band == NL80211_BAND_5GHZ) 338 rate_idx -= IL_FIRST_OFDM_RATE; 339 340 fail = tx_resp->failure_frame; 341 342 info->status.rates[0].idx = rate_idx; 343 info->status.rates[0].count = fail + 1; /* add final attempt */ 344 345 /* tx_status->rts_retry_count = tx_resp->failure_rts; */ 346 info->flags |= 347 ((status & TX_STATUS_MSK) == 348 TX_STATUS_SUCCESS) ? IEEE80211_TX_STAT_ACK : 0; 349 350 D_TX("Tx queue %d Status %s (0x%08x) plcp rate %d retries %d\n", txq_id, 351 il3945_get_tx_fail_reason(status), status, tx_resp->rate, 352 tx_resp->failure_frame); 353 354 D_TX_REPLY("Tx queue reclaim %d\n", idx); 355 il3945_tx_queue_reclaim(il, txq_id, idx); 356 357 if (status & TX_ABORT_REQUIRED_MSK) 358 IL_ERR("TODO: Implement Tx ABORT REQUIRED!!!\n"); 359 } 360 361 /***************************************************************************** 362 * 363 * Intel PRO/Wireless 3945ABG/BG Network Connection 364 * 365 * RX handler implementations 366 * 367 *****************************************************************************/ 368 #ifdef CONFIG_IWLEGACY_DEBUGFS 369 static void 370 il3945_accumulative_stats(struct il_priv *il, __le32 * stats) 371 { 372 int i; 373 __le32 *prev_stats; 374 u32 *accum_stats; 375 u32 *delta, *max_delta; 376 377 prev_stats = (__le32 *) &il->_3945.stats; 378 accum_stats = (u32 *) &il->_3945.accum_stats; 379 delta = (u32 *) &il->_3945.delta_stats; 380 max_delta = (u32 *) &il->_3945.max_delta; 381 382 for (i = sizeof(__le32); i < sizeof(struct il3945_notif_stats); 383 i += 384 sizeof(__le32), stats++, prev_stats++, delta++, max_delta++, 385 accum_stats++) { 386 if (le32_to_cpu(*stats) > le32_to_cpu(*prev_stats)) { 387 *delta = 388 (le32_to_cpu(*stats) - le32_to_cpu(*prev_stats)); 389 *accum_stats += *delta; 390 if (*delta > *max_delta) 391 *max_delta = *delta; 392 } 393 } 394 395 /* reset accumulative stats for "no-counter" type stats */ 396 il->_3945.accum_stats.general.temperature = 397 il->_3945.stats.general.temperature; 398 il->_3945.accum_stats.general.ttl_timestamp = 399 il->_3945.stats.general.ttl_timestamp; 400 } 401 #endif 402 403 void 404 il3945_hdl_stats(struct il_priv *il, struct il_rx_buf *rxb) 405 { 406 struct il_rx_pkt *pkt = rxb_addr(rxb); 407 408 D_RX("Statistics notification received (%d vs %d).\n", 409 (int)sizeof(struct il3945_notif_stats), 410 le32_to_cpu(pkt->len_n_flags) & IL_RX_FRAME_SIZE_MSK); 411 #ifdef CONFIG_IWLEGACY_DEBUGFS 412 il3945_accumulative_stats(il, (__le32 *) &pkt->u.raw); 413 #endif 414 415 memcpy(&il->_3945.stats, pkt->u.raw, sizeof(il->_3945.stats)); 416 } 417 418 void 419 il3945_hdl_c_stats(struct il_priv *il, struct il_rx_buf *rxb) 420 { 421 struct il_rx_pkt *pkt = rxb_addr(rxb); 422 __le32 *flag = (__le32 *) &pkt->u.raw; 423 424 if (le32_to_cpu(*flag) & UCODE_STATS_CLEAR_MSK) { 425 #ifdef CONFIG_IWLEGACY_DEBUGFS 426 memset(&il->_3945.accum_stats, 0, 427 sizeof(struct il3945_notif_stats)); 428 memset(&il->_3945.delta_stats, 0, 429 sizeof(struct il3945_notif_stats)); 430 memset(&il->_3945.max_delta, 0, 431 sizeof(struct il3945_notif_stats)); 432 #endif 433 D_RX("Statistics have been cleared\n"); 434 } 435 il3945_hdl_stats(il, rxb); 436 } 437 438 /****************************************************************************** 439 * 440 * Misc. internal state and helper functions 441 * 442 ******************************************************************************/ 443 444 /* This is necessary only for a number of stats, see the caller. */ 445 static int 446 il3945_is_network_packet(struct il_priv *il, struct ieee80211_hdr *header) 447 { 448 /* Filter incoming packets to determine if they are targeted toward 449 * this network, discarding packets coming from ourselves */ 450 switch (il->iw_mode) { 451 case NL80211_IFTYPE_ADHOC: /* Header: Dest. | Source | BSSID */ 452 /* packets to our IBSS update information */ 453 return ether_addr_equal_64bits(header->addr3, il->bssid); 454 case NL80211_IFTYPE_STATION: /* Header: Dest. | AP{BSSID} | Source */ 455 /* packets to our IBSS update information */ 456 return ether_addr_equal_64bits(header->addr2, il->bssid); 457 default: 458 return 1; 459 } 460 } 461 462 #define SMALL_PACKET_SIZE 256 463 464 static void 465 il3945_pass_packet_to_mac80211(struct il_priv *il, struct il_rx_buf *rxb, 466 struct ieee80211_rx_status *stats) 467 { 468 struct il_rx_pkt *pkt = rxb_addr(rxb); 469 struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)IL_RX_DATA(pkt); 470 struct il3945_rx_frame_hdr *rx_hdr = IL_RX_HDR(pkt); 471 struct il3945_rx_frame_end *rx_end = IL_RX_END(pkt); 472 u32 len = le16_to_cpu(rx_hdr->len); 473 struct sk_buff *skb; 474 __le16 fc = hdr->frame_control; 475 u32 fraglen = PAGE_SIZE << il->hw_params.rx_page_order; 476 477 /* We received data from the HW, so stop the watchdog */ 478 if (unlikely(len + IL39_RX_FRAME_SIZE > fraglen)) { 479 D_DROP("Corruption detected!\n"); 480 return; 481 } 482 483 /* We only process data packets if the interface is open */ 484 if (unlikely(!il->is_open)) { 485 D_DROP("Dropping packet while interface is not open.\n"); 486 return; 487 } 488 489 if (unlikely(test_bit(IL_STOP_REASON_PASSIVE, &il->stop_reason))) { 490 il_wake_queues_by_reason(il, IL_STOP_REASON_PASSIVE); 491 D_INFO("Woke queues - frame received on passive channel\n"); 492 } 493 494 skb = dev_alloc_skb(SMALL_PACKET_SIZE); 495 if (!skb) { 496 IL_ERR("dev_alloc_skb failed\n"); 497 return; 498 } 499 500 if (!il3945_mod_params.sw_crypto) 501 il_set_decrypted_flag(il, (struct ieee80211_hdr *)pkt, 502 le32_to_cpu(rx_end->status), stats); 503 504 /* If frame is small enough to fit into skb->head, copy it 505 * and do not consume a full page 506 */ 507 if (len <= SMALL_PACKET_SIZE) { 508 skb_put_data(skb, rx_hdr->payload, len); 509 } else { 510 skb_add_rx_frag(skb, 0, rxb->page, 511 (void *)rx_hdr->payload - (void *)pkt, len, 512 fraglen); 513 il->alloc_rxb_page--; 514 rxb->page = NULL; 515 } 516 il_update_stats(il, false, fc, len); 517 memcpy(IEEE80211_SKB_RXCB(skb), stats, sizeof(*stats)); 518 519 ieee80211_rx(il->hw, skb); 520 } 521 522 #define IL_DELAY_NEXT_SCAN_AFTER_ASSOC (HZ*6) 523 524 static void 525 il3945_hdl_rx(struct il_priv *il, struct il_rx_buf *rxb) 526 { 527 struct ieee80211_hdr *header; 528 struct ieee80211_rx_status rx_status = {}; 529 struct il_rx_pkt *pkt = rxb_addr(rxb); 530 struct il3945_rx_frame_stats *rx_stats = IL_RX_STATS(pkt); 531 struct il3945_rx_frame_hdr *rx_hdr = IL_RX_HDR(pkt); 532 struct il3945_rx_frame_end *rx_end = IL_RX_END(pkt); 533 u16 rx_stats_sig_avg __maybe_unused = le16_to_cpu(rx_stats->sig_avg); 534 u16 rx_stats_noise_diff __maybe_unused = 535 le16_to_cpu(rx_stats->noise_diff); 536 u8 network_packet; 537 538 rx_status.flag = 0; 539 rx_status.mactime = le64_to_cpu(rx_end->timestamp); 540 rx_status.band = 541 (rx_hdr-> 542 phy_flags & RX_RES_PHY_FLAGS_BAND_24_MSK) ? NL80211_BAND_2GHZ : 543 NL80211_BAND_5GHZ; 544 rx_status.freq = 545 ieee80211_channel_to_frequency(le16_to_cpu(rx_hdr->channel), 546 rx_status.band); 547 548 rx_status.rate_idx = il3945_hwrate_to_plcp_idx(rx_hdr->rate); 549 if (rx_status.band == NL80211_BAND_5GHZ) 550 rx_status.rate_idx -= IL_FIRST_OFDM_RATE; 551 552 rx_status.antenna = 553 (le16_to_cpu(rx_hdr->phy_flags) & RX_RES_PHY_FLAGS_ANTENNA_MSK) >> 554 4; 555 556 /* set the preamble flag if appropriate */ 557 if (rx_hdr->phy_flags & RX_RES_PHY_FLAGS_SHORT_PREAMBLE_MSK) 558 rx_status.enc_flags |= RX_ENC_FLAG_SHORTPRE; 559 560 if ((unlikely(rx_stats->phy_count > 20))) { 561 D_DROP("dsp size out of range [0,20]: %d\n", 562 rx_stats->phy_count); 563 return; 564 } 565 566 if (!(rx_end->status & RX_RES_STATUS_NO_CRC32_ERROR) || 567 !(rx_end->status & RX_RES_STATUS_NO_RXE_OVERFLOW)) { 568 D_RX("Bad CRC or FIFO: 0x%08X.\n", rx_end->status); 569 rx_status.flag |= RX_FLAG_FAILED_FCS_CRC; 570 } 571 572 /* Convert 3945's rssi indicator to dBm */ 573 rx_status.signal = rx_stats->rssi - IL39_RSSI_OFFSET; 574 575 D_STATS("Rssi %d sig_avg %d noise_diff %d\n", rx_status.signal, 576 rx_stats_sig_avg, rx_stats_noise_diff); 577 578 header = (struct ieee80211_hdr *)IL_RX_DATA(pkt); 579 580 network_packet = il3945_is_network_packet(il, header); 581 582 D_STATS("[%c] %d RSSI:%d Signal:%u, Rate:%u\n", 583 network_packet ? '*' : ' ', le16_to_cpu(rx_hdr->channel), 584 rx_status.signal, rx_status.signal, rx_status.rate_idx); 585 586 if (network_packet) { 587 il->_3945.last_beacon_time = 588 le32_to_cpu(rx_end->beacon_timestamp); 589 il->_3945.last_tsf = le64_to_cpu(rx_end->timestamp); 590 il->_3945.last_rx_rssi = rx_status.signal; 591 } 592 593 il3945_pass_packet_to_mac80211(il, rxb, &rx_status); 594 } 595 596 int 597 il3945_hw_txq_attach_buf_to_tfd(struct il_priv *il, struct il_tx_queue *txq, 598 dma_addr_t addr, u16 len, u8 reset, u8 pad) 599 { 600 int count; 601 struct il_queue *q; 602 struct il3945_tfd *tfd, *tfd_tmp; 603 604 q = &txq->q; 605 tfd_tmp = (struct il3945_tfd *)txq->tfds; 606 tfd = &tfd_tmp[q->write_ptr]; 607 608 if (reset) 609 memset(tfd, 0, sizeof(*tfd)); 610 611 count = TFD_CTL_COUNT_GET(le32_to_cpu(tfd->control_flags)); 612 613 if (count >= NUM_TFD_CHUNKS || count < 0) { 614 IL_ERR("Error can not send more than %d chunks\n", 615 NUM_TFD_CHUNKS); 616 return -EINVAL; 617 } 618 619 tfd->tbs[count].addr = cpu_to_le32(addr); 620 tfd->tbs[count].len = cpu_to_le32(len); 621 622 count++; 623 624 tfd->control_flags = 625 cpu_to_le32(TFD_CTL_COUNT_SET(count) | TFD_CTL_PAD_SET(pad)); 626 627 return 0; 628 } 629 630 /* 631 * il3945_hw_txq_free_tfd - Free one TFD, those at idx [txq->q.read_ptr] 632 * 633 * Does NOT advance any idxes 634 */ 635 void 636 il3945_hw_txq_free_tfd(struct il_priv *il, struct il_tx_queue *txq) 637 { 638 struct il3945_tfd *tfd_tmp = (struct il3945_tfd *)txq->tfds; 639 int idx = txq->q.read_ptr; 640 struct il3945_tfd *tfd = &tfd_tmp[idx]; 641 struct pci_dev *dev = il->pci_dev; 642 int i; 643 int counter; 644 645 /* sanity check */ 646 counter = TFD_CTL_COUNT_GET(le32_to_cpu(tfd->control_flags)); 647 if (counter > NUM_TFD_CHUNKS) { 648 IL_ERR("Too many chunks: %i\n", counter); 649 /* @todo issue fatal error, it is quite serious situation */ 650 return; 651 } 652 653 /* Unmap tx_cmd */ 654 if (counter) 655 dma_unmap_single(&dev->dev, 656 dma_unmap_addr(&txq->meta[idx], mapping), 657 dma_unmap_len(&txq->meta[idx], len), 658 DMA_TO_DEVICE); 659 660 /* unmap chunks if any */ 661 662 for (i = 1; i < counter; i++) 663 dma_unmap_single(&dev->dev, le32_to_cpu(tfd->tbs[i].addr), 664 le32_to_cpu(tfd->tbs[i].len), DMA_TO_DEVICE); 665 666 /* free SKB */ 667 if (txq->skbs) { 668 struct sk_buff *skb = txq->skbs[txq->q.read_ptr]; 669 670 /* can be called from irqs-disabled context */ 671 if (skb) { 672 dev_kfree_skb_any(skb); 673 txq->skbs[txq->q.read_ptr] = NULL; 674 } 675 } 676 } 677 678 /* 679 * il3945_hw_build_tx_cmd_rate - Add rate portion to TX_CMD: 680 * 681 */ 682 void 683 il3945_hw_build_tx_cmd_rate(struct il_priv *il, struct il_device_cmd *cmd, 684 struct ieee80211_tx_info *info, 685 struct ieee80211_hdr *hdr, int sta_id) 686 { 687 u16 hw_value = ieee80211_get_tx_rate(il->hw, info)->hw_value; 688 u16 rate_idx = min(hw_value & 0xffff, RATE_COUNT_3945 - 1); 689 u16 rate_mask; 690 int rate; 691 const u8 rts_retry_limit = 7; 692 u8 data_retry_limit; 693 __le32 tx_flags; 694 __le16 fc = hdr->frame_control; 695 struct il3945_tx_cmd *tx_cmd = (struct il3945_tx_cmd *)cmd->cmd.payload; 696 697 rate = il3945_rates[rate_idx].plcp; 698 tx_flags = tx_cmd->tx_flags; 699 700 /* We need to figure out how to get the sta->supp_rates while 701 * in this running context */ 702 rate_mask = RATES_MASK_3945; 703 704 /* Set retry limit on DATA packets and Probe Responses */ 705 if (ieee80211_is_probe_resp(fc)) 706 data_retry_limit = 3; 707 else 708 data_retry_limit = IL_DEFAULT_TX_RETRY; 709 tx_cmd->data_retry_limit = data_retry_limit; 710 /* Set retry limit on RTS packets */ 711 tx_cmd->rts_retry_limit = min(data_retry_limit, rts_retry_limit); 712 713 tx_cmd->rate = rate; 714 tx_cmd->tx_flags = tx_flags; 715 716 /* OFDM */ 717 tx_cmd->supp_rates[0] = 718 ((rate_mask & IL_OFDM_RATES_MASK) >> IL_FIRST_OFDM_RATE) & 0xFF; 719 720 /* CCK */ 721 tx_cmd->supp_rates[1] = (rate_mask & 0xF); 722 723 D_RATE("Tx sta id: %d, rate: %d (plcp), flags: 0x%4X " 724 "cck/ofdm mask: 0x%x/0x%x\n", sta_id, tx_cmd->rate, 725 le32_to_cpu(tx_cmd->tx_flags), tx_cmd->supp_rates[1], 726 tx_cmd->supp_rates[0]); 727 } 728 729 static u8 730 il3945_sync_sta(struct il_priv *il, int sta_id, u16 tx_rate) 731 { 732 unsigned long flags_spin; 733 struct il_station_entry *station; 734 735 if (sta_id == IL_INVALID_STATION) 736 return IL_INVALID_STATION; 737 738 spin_lock_irqsave(&il->sta_lock, flags_spin); 739 station = &il->stations[sta_id]; 740 741 station->sta.sta.modify_mask = STA_MODIFY_TX_RATE_MSK; 742 station->sta.rate_n_flags = cpu_to_le16(tx_rate); 743 station->sta.mode = STA_CONTROL_MODIFY_MSK; 744 il_send_add_sta(il, &station->sta, CMD_ASYNC); 745 spin_unlock_irqrestore(&il->sta_lock, flags_spin); 746 747 D_RATE("SCALE sync station %d to rate %d\n", sta_id, tx_rate); 748 return sta_id; 749 } 750 751 static void 752 il3945_set_pwr_vmain(struct il_priv *il) 753 { 754 /* 755 * (for documentation purposes) 756 * to set power to V_AUX, do 757 758 if (pci_pme_capable(il->pci_dev, PCI_D3cold)) { 759 il_set_bits_mask_prph(il, APMG_PS_CTRL_REG, 760 APMG_PS_CTRL_VAL_PWR_SRC_VAUX, 761 ~APMG_PS_CTRL_MSK_PWR_SRC); 762 763 _il_poll_bit(il, CSR_GPIO_IN, 764 CSR_GPIO_IN_VAL_VAUX_PWR_SRC, 765 CSR_GPIO_IN_BIT_AUX_POWER, 5000); 766 } 767 */ 768 769 il_set_bits_mask_prph(il, APMG_PS_CTRL_REG, 770 APMG_PS_CTRL_VAL_PWR_SRC_VMAIN, 771 ~APMG_PS_CTRL_MSK_PWR_SRC); 772 773 _il_poll_bit(il, CSR_GPIO_IN, CSR_GPIO_IN_VAL_VMAIN_PWR_SRC, 774 CSR_GPIO_IN_BIT_AUX_POWER, 5000); 775 } 776 777 static int 778 il3945_rx_init(struct il_priv *il, struct il_rx_queue *rxq) 779 { 780 il_wr(il, FH39_RCSR_RBD_BASE(0), rxq->bd_dma); 781 il_wr(il, FH39_RCSR_RPTR_ADDR(0), rxq->rb_stts_dma); 782 il_wr(il, FH39_RCSR_WPTR(0), 0); 783 il_wr(il, FH39_RCSR_CONFIG(0), 784 FH39_RCSR_RX_CONFIG_REG_VAL_DMA_CHNL_EN_ENABLE | 785 FH39_RCSR_RX_CONFIG_REG_VAL_RDRBD_EN_ENABLE | 786 FH39_RCSR_RX_CONFIG_REG_BIT_WR_STTS_EN | 787 FH39_RCSR_RX_CONFIG_REG_VAL_MAX_FRAG_SIZE_128 | (RX_QUEUE_SIZE_LOG 788 << 789 FH39_RCSR_RX_CONFIG_REG_POS_RBDC_SIZE) 790 | FH39_RCSR_RX_CONFIG_REG_VAL_IRQ_DEST_INT_HOST | (1 << 791 FH39_RCSR_RX_CONFIG_REG_POS_IRQ_RBTH) 792 | FH39_RCSR_RX_CONFIG_REG_VAL_MSG_MODE_FH); 793 794 /* fake read to flush all prev I/O */ 795 il_rd(il, FH39_RSSR_CTRL); 796 797 return 0; 798 } 799 800 static int 801 il3945_tx_reset(struct il_priv *il) 802 { 803 /* bypass mode */ 804 il_wr_prph(il, ALM_SCD_MODE_REG, 0x2); 805 806 /* RA 0 is active */ 807 il_wr_prph(il, ALM_SCD_ARASTAT_REG, 0x01); 808 809 /* all 6 fifo are active */ 810 il_wr_prph(il, ALM_SCD_TXFACT_REG, 0x3f); 811 812 il_wr_prph(il, ALM_SCD_SBYP_MODE_1_REG, 0x010000); 813 il_wr_prph(il, ALM_SCD_SBYP_MODE_2_REG, 0x030002); 814 il_wr_prph(il, ALM_SCD_TXF4MF_REG, 0x000004); 815 il_wr_prph(il, ALM_SCD_TXF5MF_REG, 0x000005); 816 817 il_wr(il, FH39_TSSR_CBB_BASE, il->_3945.shared_phys); 818 819 il_wr(il, FH39_TSSR_MSG_CONFIG, 820 FH39_TSSR_TX_MSG_CONFIG_REG_VAL_SNOOP_RD_TXPD_ON | 821 FH39_TSSR_TX_MSG_CONFIG_REG_VAL_ORDER_RD_TXPD_ON | 822 FH39_TSSR_TX_MSG_CONFIG_REG_VAL_MAX_FRAG_SIZE_128B | 823 FH39_TSSR_TX_MSG_CONFIG_REG_VAL_SNOOP_RD_TFD_ON | 824 FH39_TSSR_TX_MSG_CONFIG_REG_VAL_ORDER_RD_CBB_ON | 825 FH39_TSSR_TX_MSG_CONFIG_REG_VAL_ORDER_RSP_WAIT_TH | 826 FH39_TSSR_TX_MSG_CONFIG_REG_VAL_RSP_WAIT_TH); 827 828 return 0; 829 } 830 831 /* 832 * il3945_txq_ctx_reset - Reset TX queue context 833 * 834 * Destroys all DMA structures and initialize them again 835 */ 836 static int 837 il3945_txq_ctx_reset(struct il_priv *il) 838 { 839 int rc, txq_id; 840 841 il3945_hw_txq_ctx_free(il); 842 843 /* allocate tx queue structure */ 844 rc = il_alloc_txq_mem(il); 845 if (rc) 846 return rc; 847 848 /* Tx CMD queue */ 849 rc = il3945_tx_reset(il); 850 if (rc) 851 goto error; 852 853 /* Tx queue(s) */ 854 for (txq_id = 0; txq_id < il->hw_params.max_txq_num; txq_id++) { 855 rc = il_tx_queue_init(il, txq_id); 856 if (rc) { 857 IL_ERR("Tx %d queue init failed\n", txq_id); 858 goto error; 859 } 860 } 861 862 return rc; 863 864 error: 865 il3945_hw_txq_ctx_free(il); 866 return rc; 867 } 868 869 /* 870 * Start up 3945's basic functionality after it has been reset 871 * (e.g. after platform boot, or shutdown via il_apm_stop()) 872 * NOTE: This does not load uCode nor start the embedded processor 873 */ 874 static int 875 il3945_apm_init(struct il_priv *il) 876 { 877 int ret = il_apm_init(il); 878 879 /* Clear APMG (NIC's internal power management) interrupts */ 880 il_wr_prph(il, APMG_RTC_INT_MSK_REG, 0x0); 881 il_wr_prph(il, APMG_RTC_INT_STT_REG, 0xFFFFFFFF); 882 883 /* Reset radio chip */ 884 il_set_bits_prph(il, APMG_PS_CTRL_REG, APMG_PS_CTRL_VAL_RESET_REQ); 885 udelay(5); 886 il_clear_bits_prph(il, APMG_PS_CTRL_REG, APMG_PS_CTRL_VAL_RESET_REQ); 887 888 return ret; 889 } 890 891 static void 892 il3945_nic_config(struct il_priv *il) 893 { 894 struct il3945_eeprom *eeprom = (struct il3945_eeprom *)il->eeprom; 895 unsigned long flags; 896 u8 rev_id = il->pci_dev->revision; 897 898 spin_lock_irqsave(&il->lock, flags); 899 900 /* Determine HW type */ 901 D_INFO("HW Revision ID = 0x%X\n", rev_id); 902 903 if (rev_id & PCI_CFG_REV_ID_BIT_RTP) 904 D_INFO("RTP type\n"); 905 else if (rev_id & PCI_CFG_REV_ID_BIT_BASIC_SKU) { 906 D_INFO("3945 RADIO-MB type\n"); 907 il_set_bit(il, CSR_HW_IF_CONFIG_REG, 908 CSR39_HW_IF_CONFIG_REG_BIT_3945_MB); 909 } else { 910 D_INFO("3945 RADIO-MM type\n"); 911 il_set_bit(il, CSR_HW_IF_CONFIG_REG, 912 CSR39_HW_IF_CONFIG_REG_BIT_3945_MM); 913 } 914 915 if (EEPROM_SKU_CAP_OP_MODE_MRC == eeprom->sku_cap) { 916 D_INFO("SKU OP mode is mrc\n"); 917 il_set_bit(il, CSR_HW_IF_CONFIG_REG, 918 CSR39_HW_IF_CONFIG_REG_BIT_SKU_MRC); 919 } else 920 D_INFO("SKU OP mode is basic\n"); 921 922 if ((eeprom->board_revision & 0xF0) == 0xD0) { 923 D_INFO("3945ABG revision is 0x%X\n", eeprom->board_revision); 924 il_set_bit(il, CSR_HW_IF_CONFIG_REG, 925 CSR39_HW_IF_CONFIG_REG_BIT_BOARD_TYPE); 926 } else { 927 D_INFO("3945ABG revision is 0x%X\n", eeprom->board_revision); 928 il_clear_bit(il, CSR_HW_IF_CONFIG_REG, 929 CSR39_HW_IF_CONFIG_REG_BIT_BOARD_TYPE); 930 } 931 932 if (eeprom->almgor_m_version <= 1) { 933 il_set_bit(il, CSR_HW_IF_CONFIG_REG, 934 CSR39_HW_IF_CONFIG_REG_BITS_SILICON_TYPE_A); 935 D_INFO("Card M type A version is 0x%X\n", 936 eeprom->almgor_m_version); 937 } else { 938 D_INFO("Card M type B version is 0x%X\n", 939 eeprom->almgor_m_version); 940 il_set_bit(il, CSR_HW_IF_CONFIG_REG, 941 CSR39_HW_IF_CONFIG_REG_BITS_SILICON_TYPE_B); 942 } 943 spin_unlock_irqrestore(&il->lock, flags); 944 945 if (eeprom->sku_cap & EEPROM_SKU_CAP_SW_RF_KILL_ENABLE) 946 D_RF_KILL("SW RF KILL supported in EEPROM.\n"); 947 948 if (eeprom->sku_cap & EEPROM_SKU_CAP_HW_RF_KILL_ENABLE) 949 D_RF_KILL("HW RF KILL supported in EEPROM.\n"); 950 } 951 952 int 953 il3945_hw_nic_init(struct il_priv *il) 954 { 955 int rc; 956 unsigned long flags; 957 struct il_rx_queue *rxq = &il->rxq; 958 959 spin_lock_irqsave(&il->lock, flags); 960 il3945_apm_init(il); 961 spin_unlock_irqrestore(&il->lock, flags); 962 963 il3945_set_pwr_vmain(il); 964 il3945_nic_config(il); 965 966 /* Allocate the RX queue, or reset if it is already allocated */ 967 if (!rxq->bd) { 968 rc = il_rx_queue_alloc(il); 969 if (rc) { 970 IL_ERR("Unable to initialize Rx queue\n"); 971 return -ENOMEM; 972 } 973 } else 974 il3945_rx_queue_reset(il, rxq); 975 976 il3945_rx_replenish(il); 977 978 il3945_rx_init(il, rxq); 979 980 /* Look at using this instead: 981 rxq->need_update = 1; 982 il_rx_queue_update_write_ptr(il, rxq); 983 */ 984 985 il_wr(il, FH39_RCSR_WPTR(0), rxq->write & ~7); 986 987 rc = il3945_txq_ctx_reset(il); 988 if (rc) 989 return rc; 990 991 set_bit(S_INIT, &il->status); 992 993 return 0; 994 } 995 996 /* 997 * il3945_hw_txq_ctx_free - Free TXQ Context 998 * 999 * Destroy all TX DMA queues and structures 1000 */ 1001 void 1002 il3945_hw_txq_ctx_free(struct il_priv *il) 1003 { 1004 int txq_id; 1005 1006 /* Tx queues */ 1007 if (il->txq) { 1008 for (txq_id = 0; txq_id < il->hw_params.max_txq_num; txq_id++) 1009 if (txq_id == IL39_CMD_QUEUE_NUM) 1010 il_cmd_queue_free(il); 1011 else 1012 il_tx_queue_free(il, txq_id); 1013 } 1014 1015 /* free tx queue structure */ 1016 il_free_txq_mem(il); 1017 } 1018 1019 void 1020 il3945_hw_txq_ctx_stop(struct il_priv *il) 1021 { 1022 int txq_id; 1023 1024 /* stop SCD */ 1025 _il_wr_prph(il, ALM_SCD_MODE_REG, 0); 1026 _il_wr_prph(il, ALM_SCD_TXFACT_REG, 0); 1027 1028 /* reset TFD queues */ 1029 for (txq_id = 0; txq_id < il->hw_params.max_txq_num; txq_id++) { 1030 _il_wr(il, FH39_TCSR_CONFIG(txq_id), 0x0); 1031 _il_poll_bit(il, FH39_TSSR_TX_STATUS, 1032 FH39_TSSR_TX_STATUS_REG_MSK_CHNL_IDLE(txq_id), 1033 FH39_TSSR_TX_STATUS_REG_MSK_CHNL_IDLE(txq_id), 1034 1000); 1035 } 1036 } 1037 1038 /* 1039 * il3945_hw_reg_adjust_power_by_temp 1040 * return idx delta into power gain settings table 1041 */ 1042 static int 1043 il3945_hw_reg_adjust_power_by_temp(int new_reading, int old_reading) 1044 { 1045 return (new_reading - old_reading) * (-11) / 100; 1046 } 1047 1048 /* 1049 * il3945_hw_reg_temp_out_of_range - Keep temperature in sane range 1050 */ 1051 static inline int 1052 il3945_hw_reg_temp_out_of_range(int temperature) 1053 { 1054 return (temperature < -260 || temperature > 25) ? 1 : 0; 1055 } 1056 1057 int 1058 il3945_hw_get_temperature(struct il_priv *il) 1059 { 1060 return _il_rd(il, CSR_UCODE_DRV_GP2); 1061 } 1062 1063 /* 1064 * il3945_hw_reg_txpower_get_temperature 1065 * get the current temperature by reading from NIC 1066 */ 1067 static int 1068 il3945_hw_reg_txpower_get_temperature(struct il_priv *il) 1069 { 1070 struct il3945_eeprom *eeprom = (struct il3945_eeprom *)il->eeprom; 1071 int temperature; 1072 1073 temperature = il3945_hw_get_temperature(il); 1074 1075 /* driver's okay range is -260 to +25. 1076 * human readable okay range is 0 to +285 */ 1077 D_INFO("Temperature: %d\n", temperature + IL_TEMP_CONVERT); 1078 1079 /* handle insane temp reading */ 1080 if (il3945_hw_reg_temp_out_of_range(temperature)) { 1081 IL_ERR("Error bad temperature value %d\n", temperature); 1082 1083 /* if really really hot(?), 1084 * substitute the 3rd band/group's temp measured at factory */ 1085 if (il->last_temperature > 100) 1086 temperature = eeprom->groups[2].temperature; 1087 else /* else use most recent "sane" value from driver */ 1088 temperature = il->last_temperature; 1089 } 1090 1091 return temperature; /* raw, not "human readable" */ 1092 } 1093 1094 /* Adjust Txpower only if temperature variance is greater than threshold. 1095 * 1096 * Both are lower than older versions' 9 degrees */ 1097 #define IL_TEMPERATURE_LIMIT_TIMER 6 1098 1099 /* 1100 * il3945_is_temp_calib_needed - determines if new calibration is needed 1101 * 1102 * records new temperature in tx_mgr->temperature. 1103 * replaces tx_mgr->last_temperature *only* if calib needed 1104 * (assumes caller will actually do the calibration!). */ 1105 static int 1106 il3945_is_temp_calib_needed(struct il_priv *il) 1107 { 1108 int temp_diff; 1109 1110 il->temperature = il3945_hw_reg_txpower_get_temperature(il); 1111 temp_diff = il->temperature - il->last_temperature; 1112 1113 /* get absolute value */ 1114 if (temp_diff < 0) { 1115 D_POWER("Getting cooler, delta %d,\n", temp_diff); 1116 temp_diff = -temp_diff; 1117 } else if (temp_diff == 0) 1118 D_POWER("Same temp,\n"); 1119 else 1120 D_POWER("Getting warmer, delta %d,\n", temp_diff); 1121 1122 /* if we don't need calibration, *don't* update last_temperature */ 1123 if (temp_diff < IL_TEMPERATURE_LIMIT_TIMER) { 1124 D_POWER("Timed thermal calib not needed\n"); 1125 return 0; 1126 } 1127 1128 D_POWER("Timed thermal calib needed\n"); 1129 1130 /* assume that caller will actually do calib ... 1131 * update the "last temperature" value */ 1132 il->last_temperature = il->temperature; 1133 return 1; 1134 } 1135 1136 #define IL_MAX_GAIN_ENTRIES 78 1137 #define IL_CCK_FROM_OFDM_POWER_DIFF -5 1138 #define IL_CCK_FROM_OFDM_IDX_DIFF (10) 1139 1140 /* radio and DSP power table, each step is 1/2 dB. 1141 * 1st number is for RF analog gain, 2nd number is for DSP pre-DAC gain. */ 1142 static struct il3945_tx_power power_gain_table[2][IL_MAX_GAIN_ENTRIES] = { 1143 { 1144 {251, 127}, /* 2.4 GHz, highest power */ 1145 {251, 127}, 1146 {251, 127}, 1147 {251, 127}, 1148 {251, 125}, 1149 {251, 110}, 1150 {251, 105}, 1151 {251, 98}, 1152 {187, 125}, 1153 {187, 115}, 1154 {187, 108}, 1155 {187, 99}, 1156 {243, 119}, 1157 {243, 111}, 1158 {243, 105}, 1159 {243, 97}, 1160 {243, 92}, 1161 {211, 106}, 1162 {211, 100}, 1163 {179, 120}, 1164 {179, 113}, 1165 {179, 107}, 1166 {147, 125}, 1167 {147, 119}, 1168 {147, 112}, 1169 {147, 106}, 1170 {147, 101}, 1171 {147, 97}, 1172 {147, 91}, 1173 {115, 107}, 1174 {235, 121}, 1175 {235, 115}, 1176 {235, 109}, 1177 {203, 127}, 1178 {203, 121}, 1179 {203, 115}, 1180 {203, 108}, 1181 {203, 102}, 1182 {203, 96}, 1183 {203, 92}, 1184 {171, 110}, 1185 {171, 104}, 1186 {171, 98}, 1187 {139, 116}, 1188 {227, 125}, 1189 {227, 119}, 1190 {227, 113}, 1191 {227, 107}, 1192 {227, 101}, 1193 {227, 96}, 1194 {195, 113}, 1195 {195, 106}, 1196 {195, 102}, 1197 {195, 95}, 1198 {163, 113}, 1199 {163, 106}, 1200 {163, 102}, 1201 {163, 95}, 1202 {131, 113}, 1203 {131, 106}, 1204 {131, 102}, 1205 {131, 95}, 1206 {99, 113}, 1207 {99, 106}, 1208 {99, 102}, 1209 {99, 95}, 1210 {67, 113}, 1211 {67, 106}, 1212 {67, 102}, 1213 {67, 95}, 1214 {35, 113}, 1215 {35, 106}, 1216 {35, 102}, 1217 {35, 95}, 1218 {3, 113}, 1219 {3, 106}, 1220 {3, 102}, 1221 {3, 95} /* 2.4 GHz, lowest power */ 1222 }, 1223 { 1224 {251, 127}, /* 5.x GHz, highest power */ 1225 {251, 120}, 1226 {251, 114}, 1227 {219, 119}, 1228 {219, 101}, 1229 {187, 113}, 1230 {187, 102}, 1231 {155, 114}, 1232 {155, 103}, 1233 {123, 117}, 1234 {123, 107}, 1235 {123, 99}, 1236 {123, 92}, 1237 {91, 108}, 1238 {59, 125}, 1239 {59, 118}, 1240 {59, 109}, 1241 {59, 102}, 1242 {59, 96}, 1243 {59, 90}, 1244 {27, 104}, 1245 {27, 98}, 1246 {27, 92}, 1247 {115, 118}, 1248 {115, 111}, 1249 {115, 104}, 1250 {83, 126}, 1251 {83, 121}, 1252 {83, 113}, 1253 {83, 105}, 1254 {83, 99}, 1255 {51, 118}, 1256 {51, 111}, 1257 {51, 104}, 1258 {51, 98}, 1259 {19, 116}, 1260 {19, 109}, 1261 {19, 102}, 1262 {19, 98}, 1263 {19, 93}, 1264 {171, 113}, 1265 {171, 107}, 1266 {171, 99}, 1267 {139, 120}, 1268 {139, 113}, 1269 {139, 107}, 1270 {139, 99}, 1271 {107, 120}, 1272 {107, 113}, 1273 {107, 107}, 1274 {107, 99}, 1275 {75, 120}, 1276 {75, 113}, 1277 {75, 107}, 1278 {75, 99}, 1279 {43, 120}, 1280 {43, 113}, 1281 {43, 107}, 1282 {43, 99}, 1283 {11, 120}, 1284 {11, 113}, 1285 {11, 107}, 1286 {11, 99}, 1287 {131, 107}, 1288 {131, 99}, 1289 {99, 120}, 1290 {99, 113}, 1291 {99, 107}, 1292 {99, 99}, 1293 {67, 120}, 1294 {67, 113}, 1295 {67, 107}, 1296 {67, 99}, 1297 {35, 120}, 1298 {35, 113}, 1299 {35, 107}, 1300 {35, 99}, 1301 {3, 120} /* 5.x GHz, lowest power */ 1302 } 1303 }; 1304 1305 static inline u8 1306 il3945_hw_reg_fix_power_idx(int idx) 1307 { 1308 if (idx < 0) 1309 return 0; 1310 if (idx >= IL_MAX_GAIN_ENTRIES) 1311 return IL_MAX_GAIN_ENTRIES - 1; 1312 return (u8) idx; 1313 } 1314 1315 /* Kick off thermal recalibration check every 60 seconds */ 1316 #define REG_RECALIB_PERIOD (60) 1317 1318 /* 1319 * il3945_hw_reg_set_scan_power - Set Tx power for scan probe requests 1320 * 1321 * Set (in our channel info database) the direct scan Tx power for 1 Mbit (CCK) 1322 * or 6 Mbit (OFDM) rates. 1323 */ 1324 static void 1325 il3945_hw_reg_set_scan_power(struct il_priv *il, u32 scan_tbl_idx, s32 rate_idx, 1326 const s8 *clip_pwrs, 1327 struct il_channel_info *ch_info, int band_idx) 1328 { 1329 struct il3945_scan_power_info *scan_power_info; 1330 s8 power; 1331 u8 power_idx; 1332 1333 scan_power_info = &ch_info->scan_pwr_info[scan_tbl_idx]; 1334 1335 /* use this channel group's 6Mbit clipping/saturation pwr, 1336 * but cap at regulatory scan power restriction (set during init 1337 * based on eeprom channel data) for this channel. */ 1338 power = min(ch_info->scan_power, clip_pwrs[RATE_6M_IDX_TBL]); 1339 1340 power = min(power, il->tx_power_user_lmt); 1341 scan_power_info->requested_power = power; 1342 1343 /* find difference between new scan *power* and current "normal" 1344 * Tx *power* for 6Mb. Use this difference (x2) to adjust the 1345 * current "normal" temperature-compensated Tx power *idx* for 1346 * this rate (1Mb or 6Mb) to yield new temp-compensated scan power 1347 * *idx*. */ 1348 power_idx = 1349 ch_info->power_info[rate_idx].power_table_idx - (power - 1350 ch_info-> 1351 power_info 1352 [RATE_6M_IDX_TBL]. 1353 requested_power) * 1354 2; 1355 1356 /* store reference idx that we use when adjusting *all* scan 1357 * powers. So we can accommodate user (all channel) or spectrum 1358 * management (single channel) power changes "between" temperature 1359 * feedback compensation procedures. 1360 * don't force fit this reference idx into gain table; it may be a 1361 * negative number. This will help avoid errors when we're at 1362 * the lower bounds (highest gains, for warmest temperatures) 1363 * of the table. */ 1364 1365 /* don't exceed table bounds for "real" setting */ 1366 power_idx = il3945_hw_reg_fix_power_idx(power_idx); 1367 1368 scan_power_info->power_table_idx = power_idx; 1369 scan_power_info->tpc.tx_gain = 1370 power_gain_table[band_idx][power_idx].tx_gain; 1371 scan_power_info->tpc.dsp_atten = 1372 power_gain_table[band_idx][power_idx].dsp_atten; 1373 } 1374 1375 /* 1376 * il3945_send_tx_power - fill in Tx Power command with gain settings 1377 * 1378 * Configures power settings for all rates for the current channel, 1379 * using values from channel info struct, and send to NIC 1380 */ 1381 static int 1382 il3945_send_tx_power(struct il_priv *il) 1383 { 1384 int rate_idx, i; 1385 const struct il_channel_info *ch_info = NULL; 1386 struct il3945_txpowertable_cmd txpower = { 1387 .channel = il->active.channel, 1388 }; 1389 u16 chan; 1390 1391 if (WARN_ONCE 1392 (test_bit(S_SCAN_HW, &il->status), 1393 "TX Power requested while scanning!\n")) 1394 return -EAGAIN; 1395 1396 chan = le16_to_cpu(il->active.channel); 1397 1398 txpower.band = (il->band == NL80211_BAND_5GHZ) ? 0 : 1; 1399 ch_info = il_get_channel_info(il, il->band, chan); 1400 if (!ch_info) { 1401 IL_ERR("Failed to get channel info for channel %d [%d]\n", chan, 1402 il->band); 1403 return -EINVAL; 1404 } 1405 1406 if (!il_is_channel_valid(ch_info)) { 1407 D_POWER("Not calling TX_PWR_TBL_CMD on " "non-Tx channel.\n"); 1408 return 0; 1409 } 1410 1411 /* fill cmd with power settings for all rates for current channel */ 1412 /* Fill OFDM rate */ 1413 for (rate_idx = IL_FIRST_OFDM_RATE, i = 0; 1414 rate_idx <= IL39_LAST_OFDM_RATE; rate_idx++, i++) { 1415 1416 txpower.power[i].tpc = ch_info->power_info[i].tpc; 1417 txpower.power[i].rate = il3945_rates[rate_idx].plcp; 1418 1419 D_POWER("ch %d:%d rf %d dsp %3d rate code 0x%02x\n", 1420 le16_to_cpu(txpower.channel), txpower.band, 1421 txpower.power[i].tpc.tx_gain, 1422 txpower.power[i].tpc.dsp_atten, txpower.power[i].rate); 1423 } 1424 /* Fill CCK rates */ 1425 for (rate_idx = IL_FIRST_CCK_RATE; rate_idx <= IL_LAST_CCK_RATE; 1426 rate_idx++, i++) { 1427 txpower.power[i].tpc = ch_info->power_info[i].tpc; 1428 txpower.power[i].rate = il3945_rates[rate_idx].plcp; 1429 1430 D_POWER("ch %d:%d rf %d dsp %3d rate code 0x%02x\n", 1431 le16_to_cpu(txpower.channel), txpower.band, 1432 txpower.power[i].tpc.tx_gain, 1433 txpower.power[i].tpc.dsp_atten, txpower.power[i].rate); 1434 } 1435 1436 return il_send_cmd_pdu(il, C_TX_PWR_TBL, 1437 sizeof(struct il3945_txpowertable_cmd), 1438 &txpower); 1439 1440 } 1441 1442 /* 1443 * il3945_hw_reg_set_new_power - Configures power tables at new levels 1444 * @ch_info: Channel to update. Uses power_info.requested_power. 1445 * 1446 * Replace requested_power and base_power_idx ch_info fields for 1447 * one channel. 1448 * 1449 * Called if user or spectrum management changes power preferences. 1450 * Takes into account h/w and modulation limitations (clip power). 1451 * 1452 * This does *not* send anything to NIC, just sets up ch_info for one channel. 1453 * 1454 * NOTE: reg_compensate_for_temperature_dif() *must* be run after this to 1455 * properly fill out the scan powers, and actual h/w gain settings, 1456 * and send changes to NIC 1457 */ 1458 static int 1459 il3945_hw_reg_set_new_power(struct il_priv *il, struct il_channel_info *ch_info) 1460 { 1461 struct il3945_channel_power_info *power_info; 1462 int power_changed = 0; 1463 int i; 1464 const s8 *clip_pwrs; 1465 int power; 1466 1467 /* Get this chnlgrp's rate-to-max/clip-powers table */ 1468 clip_pwrs = il->_3945.clip_groups[ch_info->group_idx].clip_powers; 1469 1470 /* Get this channel's rate-to-current-power settings table */ 1471 power_info = ch_info->power_info; 1472 1473 /* update OFDM Txpower settings */ 1474 for (i = RATE_6M_IDX_TBL; i <= RATE_54M_IDX_TBL; i++, ++power_info) { 1475 int delta_idx; 1476 1477 /* limit new power to be no more than h/w capability */ 1478 power = min(ch_info->curr_txpow, clip_pwrs[i]); 1479 if (power == power_info->requested_power) 1480 continue; 1481 1482 /* find difference between old and new requested powers, 1483 * update base (non-temp-compensated) power idx */ 1484 delta_idx = (power - power_info->requested_power) * 2; 1485 power_info->base_power_idx -= delta_idx; 1486 1487 /* save new requested power value */ 1488 power_info->requested_power = power; 1489 1490 power_changed = 1; 1491 } 1492 1493 /* update CCK Txpower settings, based on OFDM 12M setting ... 1494 * ... all CCK power settings for a given channel are the *same*. */ 1495 if (power_changed) { 1496 power = 1497 ch_info->power_info[RATE_12M_IDX_TBL].requested_power + 1498 IL_CCK_FROM_OFDM_POWER_DIFF; 1499 1500 /* do all CCK rates' il3945_channel_power_info structures */ 1501 for (i = RATE_1M_IDX_TBL; i <= RATE_11M_IDX_TBL; i++) { 1502 power_info->requested_power = power; 1503 power_info->base_power_idx = 1504 ch_info->power_info[RATE_12M_IDX_TBL]. 1505 base_power_idx + IL_CCK_FROM_OFDM_IDX_DIFF; 1506 ++power_info; 1507 } 1508 } 1509 1510 return 0; 1511 } 1512 1513 /* 1514 * il3945_hw_reg_get_ch_txpower_limit - returns new power limit for channel 1515 * 1516 * NOTE: Returned power limit may be less (but not more) than requested, 1517 * based strictly on regulatory (eeprom and spectrum mgt) limitations 1518 * (no consideration for h/w clipping limitations). 1519 */ 1520 static int 1521 il3945_hw_reg_get_ch_txpower_limit(struct il_channel_info *ch_info) 1522 { 1523 s8 max_power; 1524 1525 #if 0 1526 /* if we're using TGd limits, use lower of TGd or EEPROM */ 1527 if (ch_info->tgd_data.max_power != 0) 1528 max_power = 1529 min(ch_info->tgd_data.max_power, 1530 ch_info->eeprom.max_power_avg); 1531 1532 /* else just use EEPROM limits */ 1533 else 1534 #endif 1535 max_power = ch_info->eeprom.max_power_avg; 1536 1537 return min(max_power, ch_info->max_power_avg); 1538 } 1539 1540 /* 1541 * il3945_hw_reg_comp_txpower_temp - Compensate for temperature 1542 * 1543 * Compensate txpower settings of *all* channels for temperature. 1544 * This only accounts for the difference between current temperature 1545 * and the factory calibration temperatures, and bases the new settings 1546 * on the channel's base_power_idx. 1547 * 1548 * If RxOn is "associated", this sends the new Txpower to NIC! 1549 */ 1550 static int 1551 il3945_hw_reg_comp_txpower_temp(struct il_priv *il) 1552 { 1553 struct il_channel_info *ch_info = NULL; 1554 struct il3945_eeprom *eeprom = (struct il3945_eeprom *)il->eeprom; 1555 int delta_idx; 1556 const s8 *clip_pwrs; /* array of h/w max power levels for each rate */ 1557 u8 a_band; 1558 u8 rate_idx; 1559 u8 scan_tbl_idx; 1560 u8 i; 1561 int ref_temp; 1562 int temperature = il->temperature; 1563 1564 if (il->disable_tx_power_cal || test_bit(S_SCANNING, &il->status)) { 1565 /* do not perform tx power calibration */ 1566 return 0; 1567 } 1568 /* set up new Tx power info for each and every channel, 2.4 and 5.x */ 1569 for (i = 0; i < il->channel_count; i++) { 1570 ch_info = &il->channel_info[i]; 1571 a_band = il_is_channel_a_band(ch_info); 1572 1573 /* Get this chnlgrp's factory calibration temperature */ 1574 ref_temp = (s16) eeprom->groups[ch_info->group_idx].temperature; 1575 1576 /* get power idx adjustment based on current and factory 1577 * temps */ 1578 delta_idx = 1579 il3945_hw_reg_adjust_power_by_temp(temperature, ref_temp); 1580 1581 /* set tx power value for all rates, OFDM and CCK */ 1582 for (rate_idx = 0; rate_idx < RATE_COUNT_3945; rate_idx++) { 1583 int power_idx = 1584 ch_info->power_info[rate_idx].base_power_idx; 1585 1586 /* temperature compensate */ 1587 power_idx += delta_idx; 1588 1589 /* stay within table range */ 1590 power_idx = il3945_hw_reg_fix_power_idx(power_idx); 1591 ch_info->power_info[rate_idx].power_table_idx = 1592 (u8) power_idx; 1593 ch_info->power_info[rate_idx].tpc = 1594 power_gain_table[a_band][power_idx]; 1595 } 1596 1597 /* Get this chnlgrp's rate-to-max/clip-powers table */ 1598 clip_pwrs = 1599 il->_3945.clip_groups[ch_info->group_idx].clip_powers; 1600 1601 /* set scan tx power, 1Mbit for CCK, 6Mbit for OFDM */ 1602 for (scan_tbl_idx = 0; scan_tbl_idx < IL_NUM_SCAN_RATES; 1603 scan_tbl_idx++) { 1604 s32 actual_idx = 1605 (scan_tbl_idx == 1606 0) ? RATE_1M_IDX_TBL : RATE_6M_IDX_TBL; 1607 il3945_hw_reg_set_scan_power(il, scan_tbl_idx, 1608 actual_idx, clip_pwrs, 1609 ch_info, a_band); 1610 } 1611 } 1612 1613 /* send Txpower command for current channel to ucode */ 1614 return il->ops->send_tx_power(il); 1615 } 1616 1617 int 1618 il3945_hw_reg_set_txpower(struct il_priv *il, s8 power) 1619 { 1620 struct il_channel_info *ch_info; 1621 s8 max_power; 1622 u8 i; 1623 1624 if (il->tx_power_user_lmt == power) { 1625 D_POWER("Requested Tx power same as current " "limit: %ddBm.\n", 1626 power); 1627 return 0; 1628 } 1629 1630 D_POWER("Setting upper limit clamp to %ddBm.\n", power); 1631 il->tx_power_user_lmt = power; 1632 1633 /* set up new Tx powers for each and every channel, 2.4 and 5.x */ 1634 1635 for (i = 0; i < il->channel_count; i++) { 1636 ch_info = &il->channel_info[i]; 1637 1638 /* find minimum power of all user and regulatory constraints 1639 * (does not consider h/w clipping limitations) */ 1640 max_power = il3945_hw_reg_get_ch_txpower_limit(ch_info); 1641 max_power = min(power, max_power); 1642 if (max_power != ch_info->curr_txpow) { 1643 ch_info->curr_txpow = max_power; 1644 1645 /* this considers the h/w clipping limitations */ 1646 il3945_hw_reg_set_new_power(il, ch_info); 1647 } 1648 } 1649 1650 /* update txpower settings for all channels, 1651 * send to NIC if associated. */ 1652 il3945_is_temp_calib_needed(il); 1653 il3945_hw_reg_comp_txpower_temp(il); 1654 1655 return 0; 1656 } 1657 1658 static int 1659 il3945_send_rxon_assoc(struct il_priv *il) 1660 { 1661 int rc = 0; 1662 struct il_rx_pkt *pkt; 1663 struct il3945_rxon_assoc_cmd rxon_assoc; 1664 struct il_host_cmd cmd = { 1665 .id = C_RXON_ASSOC, 1666 .len = sizeof(rxon_assoc), 1667 .flags = CMD_WANT_SKB, 1668 .data = &rxon_assoc, 1669 }; 1670 const struct il_rxon_cmd *rxon1 = &il->staging; 1671 const struct il_rxon_cmd *rxon2 = &il->active; 1672 1673 if (rxon1->flags == rxon2->flags && 1674 rxon1->filter_flags == rxon2->filter_flags && 1675 rxon1->cck_basic_rates == rxon2->cck_basic_rates && 1676 rxon1->ofdm_basic_rates == rxon2->ofdm_basic_rates) { 1677 D_INFO("Using current RXON_ASSOC. Not resending.\n"); 1678 return 0; 1679 } 1680 1681 rxon_assoc.flags = il->staging.flags; 1682 rxon_assoc.filter_flags = il->staging.filter_flags; 1683 rxon_assoc.ofdm_basic_rates = il->staging.ofdm_basic_rates; 1684 rxon_assoc.cck_basic_rates = il->staging.cck_basic_rates; 1685 rxon_assoc.reserved = 0; 1686 1687 rc = il_send_cmd_sync(il, &cmd); 1688 if (rc) 1689 return rc; 1690 1691 pkt = (struct il_rx_pkt *)cmd.reply_page; 1692 if (pkt->hdr.flags & IL_CMD_FAILED_MSK) { 1693 IL_ERR("Bad return from C_RXON_ASSOC command\n"); 1694 rc = -EIO; 1695 } 1696 1697 il_free_pages(il, cmd.reply_page); 1698 1699 return rc; 1700 } 1701 1702 /* 1703 * il3945_commit_rxon - commit staging_rxon to hardware 1704 * 1705 * The RXON command in staging_rxon is committed to the hardware and 1706 * the active_rxon structure is updated with the new data. This 1707 * function correctly transitions out of the RXON_ASSOC_MSK state if 1708 * a HW tune is required based on the RXON structure changes. 1709 */ 1710 int 1711 il3945_commit_rxon(struct il_priv *il) 1712 { 1713 /* cast away the const for active_rxon in this function */ 1714 struct il3945_rxon_cmd *active_rxon = (void *)&il->active; 1715 struct il3945_rxon_cmd *staging_rxon = (void *)&il->staging; 1716 int rc = 0; 1717 bool new_assoc = !!(staging_rxon->filter_flags & RXON_FILTER_ASSOC_MSK); 1718 1719 if (test_bit(S_EXIT_PENDING, &il->status)) 1720 return -EINVAL; 1721 1722 if (!il_is_alive(il)) 1723 return -1; 1724 1725 /* always get timestamp with Rx frame */ 1726 staging_rxon->flags |= RXON_FLG_TSF2HOST_MSK; 1727 1728 /* select antenna */ 1729 staging_rxon->flags &= ~(RXON_FLG_DIS_DIV_MSK | RXON_FLG_ANT_SEL_MSK); 1730 staging_rxon->flags |= il3945_get_antenna_flags(il); 1731 1732 rc = il_check_rxon_cmd(il); 1733 if (rc) { 1734 IL_ERR("Invalid RXON configuration. Not committing.\n"); 1735 return -EINVAL; 1736 } 1737 1738 /* If we don't need to send a full RXON, we can use 1739 * il3945_rxon_assoc_cmd which is used to reconfigure filter 1740 * and other flags for the current radio configuration. */ 1741 if (!il_full_rxon_required(il)) { 1742 rc = il_send_rxon_assoc(il); 1743 if (rc) { 1744 IL_ERR("Error setting RXON_ASSOC " 1745 "configuration (%d).\n", rc); 1746 return rc; 1747 } 1748 1749 memcpy(active_rxon, staging_rxon, sizeof(*active_rxon)); 1750 /* 1751 * We do not commit tx power settings while channel changing, 1752 * do it now if tx power changed. 1753 */ 1754 il_set_tx_power(il, il->tx_power_next, false); 1755 return 0; 1756 } 1757 1758 /* If we are currently associated and the new config requires 1759 * an RXON_ASSOC and the new config wants the associated mask enabled, 1760 * we must clear the associated from the active configuration 1761 * before we apply the new config */ 1762 if (il_is_associated(il) && new_assoc) { 1763 D_INFO("Toggling associated bit on current RXON\n"); 1764 active_rxon->filter_flags &= ~RXON_FILTER_ASSOC_MSK; 1765 1766 /* 1767 * reserved4 and 5 could have been filled by the iwlcore code. 1768 * Let's clear them before pushing to the 3945. 1769 */ 1770 active_rxon->reserved4 = 0; 1771 active_rxon->reserved5 = 0; 1772 rc = il_send_cmd_pdu(il, C_RXON, sizeof(struct il3945_rxon_cmd), 1773 &il->active); 1774 1775 /* If the mask clearing failed then we set 1776 * active_rxon back to what it was previously */ 1777 if (rc) { 1778 active_rxon->filter_flags |= RXON_FILTER_ASSOC_MSK; 1779 IL_ERR("Error clearing ASSOC_MSK on current " 1780 "configuration (%d).\n", rc); 1781 return rc; 1782 } 1783 il_clear_ucode_stations(il); 1784 il_restore_stations(il); 1785 } 1786 1787 D_INFO("Sending RXON\n" "* with%s RXON_FILTER_ASSOC_MSK\n" 1788 "* channel = %d\n" "* bssid = %pM\n", (new_assoc ? "" : "out"), 1789 le16_to_cpu(staging_rxon->channel), staging_rxon->bssid_addr); 1790 1791 /* 1792 * reserved4 and 5 could have been filled by the iwlcore code. 1793 * Let's clear them before pushing to the 3945. 1794 */ 1795 staging_rxon->reserved4 = 0; 1796 staging_rxon->reserved5 = 0; 1797 1798 il_set_rxon_hwcrypto(il, !il3945_mod_params.sw_crypto); 1799 1800 /* Apply the new configuration */ 1801 rc = il_send_cmd_pdu(il, C_RXON, sizeof(struct il3945_rxon_cmd), 1802 staging_rxon); 1803 if (rc) { 1804 IL_ERR("Error setting new configuration (%d).\n", rc); 1805 return rc; 1806 } 1807 1808 memcpy(active_rxon, staging_rxon, sizeof(*active_rxon)); 1809 1810 if (!new_assoc) { 1811 il_clear_ucode_stations(il); 1812 il_restore_stations(il); 1813 } 1814 1815 /* If we issue a new RXON command which required a tune then we must 1816 * send a new TXPOWER command or we won't be able to Tx any frames */ 1817 rc = il_set_tx_power(il, il->tx_power_next, true); 1818 if (rc) { 1819 IL_ERR("Error setting Tx power (%d).\n", rc); 1820 return rc; 1821 } 1822 1823 /* Init the hardware's rate fallback order based on the band */ 1824 rc = il3945_init_hw_rate_table(il); 1825 if (rc) { 1826 IL_ERR("Error setting HW rate table: %02X\n", rc); 1827 return -EIO; 1828 } 1829 1830 return 0; 1831 } 1832 1833 /* 1834 * il3945_reg_txpower_periodic - called when time to check our temperature. 1835 * 1836 * -- reset periodic timer 1837 * -- see if temp has changed enough to warrant re-calibration ... if so: 1838 * -- correct coeffs for temp (can reset temp timer) 1839 * -- save this temp as "last", 1840 * -- send new set of gain settings to NIC 1841 * NOTE: This should continue working, even when we're not associated, 1842 * so we can keep our internal table of scan powers current. */ 1843 void 1844 il3945_reg_txpower_periodic(struct il_priv *il) 1845 { 1846 /* This will kick in the "brute force" 1847 * il3945_hw_reg_comp_txpower_temp() below */ 1848 if (!il3945_is_temp_calib_needed(il)) 1849 goto reschedule; 1850 1851 /* Set up a new set of temp-adjusted TxPowers, send to NIC. 1852 * This is based *only* on current temperature, 1853 * ignoring any previous power measurements */ 1854 il3945_hw_reg_comp_txpower_temp(il); 1855 1856 reschedule: 1857 queue_delayed_work(il->workqueue, &il->_3945.thermal_periodic, 1858 REG_RECALIB_PERIOD * HZ); 1859 } 1860 1861 static void 1862 il3945_bg_reg_txpower_periodic(struct work_struct *work) 1863 { 1864 struct il_priv *il = container_of(work, struct il_priv, 1865 _3945.thermal_periodic.work); 1866 1867 mutex_lock(&il->mutex); 1868 if (test_bit(S_EXIT_PENDING, &il->status) || il->txq == NULL) 1869 goto out; 1870 1871 il3945_reg_txpower_periodic(il); 1872 out: 1873 mutex_unlock(&il->mutex); 1874 } 1875 1876 /* 1877 * il3945_hw_reg_get_ch_grp_idx - find the channel-group idx (0-4) for channel. 1878 * 1879 * This function is used when initializing channel-info structs. 1880 * 1881 * NOTE: These channel groups do *NOT* match the bands above! 1882 * These channel groups are based on factory-tested channels; 1883 * on A-band, EEPROM's "group frequency" entries represent the top 1884 * channel in each group 1-4. Group 5 All B/G channels are in group 0. 1885 */ 1886 static u16 1887 il3945_hw_reg_get_ch_grp_idx(struct il_priv *il, 1888 const struct il_channel_info *ch_info) 1889 { 1890 struct il3945_eeprom *eeprom = (struct il3945_eeprom *)il->eeprom; 1891 struct il3945_eeprom_txpower_group *ch_grp = &eeprom->groups[0]; 1892 u8 group; 1893 u16 group_idx = 0; /* based on factory calib frequencies */ 1894 u8 grp_channel; 1895 1896 /* Find the group idx for the channel ... don't use idx 1(?) */ 1897 if (il_is_channel_a_band(ch_info)) { 1898 for (group = 1; group < 5; group++) { 1899 grp_channel = ch_grp[group].group_channel; 1900 if (ch_info->channel <= grp_channel) { 1901 group_idx = group; 1902 break; 1903 } 1904 } 1905 /* group 4 has a few channels *above* its factory cal freq */ 1906 if (group == 5) 1907 group_idx = 4; 1908 } else 1909 group_idx = 0; /* 2.4 GHz, group 0 */ 1910 1911 D_POWER("Chnl %d mapped to grp %d\n", ch_info->channel, group_idx); 1912 return group_idx; 1913 } 1914 1915 /* 1916 * il3945_hw_reg_get_matched_power_idx - Interpolate to get nominal idx 1917 * 1918 * Interpolate to get nominal (i.e. at factory calibration temperature) idx 1919 * into radio/DSP gain settings table for requested power. 1920 */ 1921 static int 1922 il3945_hw_reg_get_matched_power_idx(struct il_priv *il, s8 requested_power, 1923 s32 setting_idx, s32 *new_idx) 1924 { 1925 const struct il3945_eeprom_txpower_group *chnl_grp = NULL; 1926 struct il3945_eeprom *eeprom = (struct il3945_eeprom *)il->eeprom; 1927 s32 idx0, idx1; 1928 s32 power = 2 * requested_power; 1929 s32 i; 1930 const struct il3945_eeprom_txpower_sample *samples; 1931 s32 gains0, gains1; 1932 s32 res; 1933 s32 denominator; 1934 1935 chnl_grp = &eeprom->groups[setting_idx]; 1936 samples = chnl_grp->samples; 1937 for (i = 0; i < 5; i++) { 1938 if (power == samples[i].power) { 1939 *new_idx = samples[i].gain_idx; 1940 return 0; 1941 } 1942 } 1943 1944 if (power > samples[1].power) { 1945 idx0 = 0; 1946 idx1 = 1; 1947 } else if (power > samples[2].power) { 1948 idx0 = 1; 1949 idx1 = 2; 1950 } else if (power > samples[3].power) { 1951 idx0 = 2; 1952 idx1 = 3; 1953 } else { 1954 idx0 = 3; 1955 idx1 = 4; 1956 } 1957 1958 denominator = (s32) samples[idx1].power - (s32) samples[idx0].power; 1959 if (denominator == 0) 1960 return -EINVAL; 1961 gains0 = (s32) samples[idx0].gain_idx * (1 << 19); 1962 gains1 = (s32) samples[idx1].gain_idx * (1 << 19); 1963 res = 1964 gains0 + (gains1 - gains0) * ((s32) power - 1965 (s32) samples[idx0].power) / 1966 denominator + (1 << 18); 1967 *new_idx = res >> 19; 1968 return 0; 1969 } 1970 1971 static void 1972 il3945_hw_reg_init_channel_groups(struct il_priv *il) 1973 { 1974 u32 i; 1975 s32 rate_idx; 1976 struct il3945_eeprom *eeprom = (struct il3945_eeprom *)il->eeprom; 1977 const struct il3945_eeprom_txpower_group *group; 1978 1979 D_POWER("Initializing factory calib info from EEPROM\n"); 1980 1981 for (i = 0; i < IL_NUM_TX_CALIB_GROUPS; i++) { 1982 s8 *clip_pwrs; /* table of power levels for each rate */ 1983 s8 satur_pwr; /* saturation power for each chnl group */ 1984 group = &eeprom->groups[i]; 1985 1986 /* sanity check on factory saturation power value */ 1987 if (group->saturation_power < 40) { 1988 IL_WARN("Error: saturation power is %d, " 1989 "less than minimum expected 40\n", 1990 group->saturation_power); 1991 return; 1992 } 1993 1994 /* 1995 * Derive requested power levels for each rate, based on 1996 * hardware capabilities (saturation power for band). 1997 * Basic value is 3dB down from saturation, with further 1998 * power reductions for highest 3 data rates. These 1999 * backoffs provide headroom for high rate modulation 2000 * power peaks, without too much distortion (clipping). 2001 */ 2002 /* we'll fill in this array with h/w max power levels */ 2003 clip_pwrs = (s8 *) il->_3945.clip_groups[i].clip_powers; 2004 2005 /* divide factory saturation power by 2 to find -3dB level */ 2006 satur_pwr = (s8) (group->saturation_power >> 1); 2007 2008 /* fill in channel group's nominal powers for each rate */ 2009 for (rate_idx = 0; rate_idx < RATE_COUNT_3945; 2010 rate_idx++, clip_pwrs++) { 2011 switch (rate_idx) { 2012 case RATE_36M_IDX_TBL: 2013 if (i == 0) /* B/G */ 2014 *clip_pwrs = satur_pwr; 2015 else /* A */ 2016 *clip_pwrs = satur_pwr - 5; 2017 break; 2018 case RATE_48M_IDX_TBL: 2019 if (i == 0) 2020 *clip_pwrs = satur_pwr - 7; 2021 else 2022 *clip_pwrs = satur_pwr - 10; 2023 break; 2024 case RATE_54M_IDX_TBL: 2025 if (i == 0) 2026 *clip_pwrs = satur_pwr - 9; 2027 else 2028 *clip_pwrs = satur_pwr - 12; 2029 break; 2030 default: 2031 *clip_pwrs = satur_pwr; 2032 break; 2033 } 2034 } 2035 } 2036 } 2037 2038 /* 2039 * il3945_txpower_set_from_eeprom - Set channel power info based on EEPROM 2040 * 2041 * Second pass (during init) to set up il->channel_info 2042 * 2043 * Set up Tx-power settings in our channel info database for each VALID 2044 * (for this geo/SKU) channel, at all Tx data rates, based on eeprom values 2045 * and current temperature. 2046 * 2047 * Since this is based on current temperature (at init time), these values may 2048 * not be valid for very long, but it gives us a starting/default point, 2049 * and allows us to active (i.e. using Tx) scan. 2050 * 2051 * This does *not* write values to NIC, just sets up our internal table. 2052 */ 2053 int 2054 il3945_txpower_set_from_eeprom(struct il_priv *il) 2055 { 2056 struct il_channel_info *ch_info = NULL; 2057 struct il3945_channel_power_info *pwr_info; 2058 struct il3945_eeprom *eeprom = (struct il3945_eeprom *)il->eeprom; 2059 int delta_idx; 2060 u8 rate_idx; 2061 u8 scan_tbl_idx; 2062 const s8 *clip_pwrs; /* array of power levels for each rate */ 2063 u8 gain, dsp_atten; 2064 s8 power; 2065 u8 pwr_idx, base_pwr_idx, a_band; 2066 u8 i; 2067 int temperature; 2068 2069 /* save temperature reference, 2070 * so we can determine next time to calibrate */ 2071 temperature = il3945_hw_reg_txpower_get_temperature(il); 2072 il->last_temperature = temperature; 2073 2074 il3945_hw_reg_init_channel_groups(il); 2075 2076 /* initialize Tx power info for each and every channel, 2.4 and 5.x */ 2077 for (i = 0, ch_info = il->channel_info; i < il->channel_count; 2078 i++, ch_info++) { 2079 a_band = il_is_channel_a_band(ch_info); 2080 if (!il_is_channel_valid(ch_info)) 2081 continue; 2082 2083 /* find this channel's channel group (*not* "band") idx */ 2084 ch_info->group_idx = il3945_hw_reg_get_ch_grp_idx(il, ch_info); 2085 2086 /* Get this chnlgrp's rate->max/clip-powers table */ 2087 clip_pwrs = 2088 il->_3945.clip_groups[ch_info->group_idx].clip_powers; 2089 2090 /* calculate power idx *adjustment* value according to 2091 * diff between current temperature and factory temperature */ 2092 delta_idx = 2093 il3945_hw_reg_adjust_power_by_temp(temperature, 2094 eeprom->groups[ch_info-> 2095 group_idx]. 2096 temperature); 2097 2098 D_POWER("Delta idx for channel %d: %d [%d]\n", ch_info->channel, 2099 delta_idx, temperature + IL_TEMP_CONVERT); 2100 2101 /* set tx power value for all OFDM rates */ 2102 for (rate_idx = 0; rate_idx < IL_OFDM_RATES; rate_idx++) { 2103 s32 power_idx; 2104 int rc; 2105 2106 /* use channel group's clip-power table, 2107 * but don't exceed channel's max power */ 2108 s8 pwr = min(ch_info->max_power_avg, 2109 clip_pwrs[rate_idx]); 2110 2111 pwr_info = &ch_info->power_info[rate_idx]; 2112 2113 /* get base (i.e. at factory-measured temperature) 2114 * power table idx for this rate's power */ 2115 rc = il3945_hw_reg_get_matched_power_idx(il, pwr, 2116 ch_info-> 2117 group_idx, 2118 &power_idx); 2119 if (rc) { 2120 IL_ERR("Invalid power idx\n"); 2121 return rc; 2122 } 2123 pwr_info->base_power_idx = (u8) power_idx; 2124 2125 /* temperature compensate */ 2126 power_idx += delta_idx; 2127 2128 /* stay within range of gain table */ 2129 power_idx = il3945_hw_reg_fix_power_idx(power_idx); 2130 2131 /* fill 1 OFDM rate's il3945_channel_power_info struct */ 2132 pwr_info->requested_power = pwr; 2133 pwr_info->power_table_idx = (u8) power_idx; 2134 pwr_info->tpc.tx_gain = 2135 power_gain_table[a_band][power_idx].tx_gain; 2136 pwr_info->tpc.dsp_atten = 2137 power_gain_table[a_band][power_idx].dsp_atten; 2138 } 2139 2140 /* set tx power for CCK rates, based on OFDM 12 Mbit settings */ 2141 pwr_info = &ch_info->power_info[RATE_12M_IDX_TBL]; 2142 power = pwr_info->requested_power + IL_CCK_FROM_OFDM_POWER_DIFF; 2143 pwr_idx = pwr_info->power_table_idx + IL_CCK_FROM_OFDM_IDX_DIFF; 2144 base_pwr_idx = 2145 pwr_info->base_power_idx + IL_CCK_FROM_OFDM_IDX_DIFF; 2146 2147 /* stay within table range */ 2148 pwr_idx = il3945_hw_reg_fix_power_idx(pwr_idx); 2149 gain = power_gain_table[a_band][pwr_idx].tx_gain; 2150 dsp_atten = power_gain_table[a_band][pwr_idx].dsp_atten; 2151 2152 /* fill each CCK rate's il3945_channel_power_info structure 2153 * NOTE: All CCK-rate Txpwrs are the same for a given chnl! 2154 * NOTE: CCK rates start at end of OFDM rates! */ 2155 for (rate_idx = 0; rate_idx < IL_CCK_RATES; rate_idx++) { 2156 pwr_info = 2157 &ch_info->power_info[rate_idx + IL_OFDM_RATES]; 2158 pwr_info->requested_power = power; 2159 pwr_info->power_table_idx = pwr_idx; 2160 pwr_info->base_power_idx = base_pwr_idx; 2161 pwr_info->tpc.tx_gain = gain; 2162 pwr_info->tpc.dsp_atten = dsp_atten; 2163 } 2164 2165 /* set scan tx power, 1Mbit for CCK, 6Mbit for OFDM */ 2166 for (scan_tbl_idx = 0; scan_tbl_idx < IL_NUM_SCAN_RATES; 2167 scan_tbl_idx++) { 2168 s32 actual_idx = 2169 (scan_tbl_idx == 2170 0) ? RATE_1M_IDX_TBL : RATE_6M_IDX_TBL; 2171 il3945_hw_reg_set_scan_power(il, scan_tbl_idx, 2172 actual_idx, clip_pwrs, 2173 ch_info, a_band); 2174 } 2175 } 2176 2177 return 0; 2178 } 2179 2180 int 2181 il3945_hw_rxq_stop(struct il_priv *il) 2182 { 2183 int ret; 2184 2185 _il_wr(il, FH39_RCSR_CONFIG(0), 0); 2186 ret = _il_poll_bit(il, FH39_RSSR_STATUS, 2187 FH39_RSSR_CHNL0_RX_STATUS_CHNL_IDLE, 2188 FH39_RSSR_CHNL0_RX_STATUS_CHNL_IDLE, 2189 1000); 2190 if (ret < 0) 2191 IL_ERR("Can't stop Rx DMA.\n"); 2192 2193 return 0; 2194 } 2195 2196 int 2197 il3945_hw_tx_queue_init(struct il_priv *il, struct il_tx_queue *txq) 2198 { 2199 int txq_id = txq->q.id; 2200 2201 struct il3945_shared *shared_data = il->_3945.shared_virt; 2202 2203 shared_data->tx_base_ptr[txq_id] = cpu_to_le32((u32) txq->q.dma_addr); 2204 2205 il_wr(il, FH39_CBCC_CTRL(txq_id), 0); 2206 il_wr(il, FH39_CBCC_BASE(txq_id), 0); 2207 2208 il_wr(il, FH39_TCSR_CONFIG(txq_id), 2209 FH39_TCSR_TX_CONFIG_REG_VAL_CIRQ_RTC_NOINT | 2210 FH39_TCSR_TX_CONFIG_REG_VAL_MSG_MODE_TXF | 2211 FH39_TCSR_TX_CONFIG_REG_VAL_CIRQ_HOST_IFTFD | 2212 FH39_TCSR_TX_CONFIG_REG_VAL_DMA_CREDIT_ENABLE_VAL | 2213 FH39_TCSR_TX_CONFIG_REG_VAL_DMA_CHNL_ENABLE); 2214 2215 /* fake read to flush all prev. writes */ 2216 _il_rd(il, FH39_TSSR_CBB_BASE); 2217 2218 return 0; 2219 } 2220 2221 /* 2222 * HCMD utils 2223 */ 2224 static u16 2225 il3945_get_hcmd_size(u8 cmd_id, u16 len) 2226 { 2227 switch (cmd_id) { 2228 case C_RXON: 2229 return sizeof(struct il3945_rxon_cmd); 2230 case C_POWER_TBL: 2231 return sizeof(struct il3945_powertable_cmd); 2232 default: 2233 return len; 2234 } 2235 } 2236 2237 static u16 2238 il3945_build_addsta_hcmd(const struct il_addsta_cmd *cmd, u8 * data) 2239 { 2240 struct il3945_addsta_cmd *addsta = (struct il3945_addsta_cmd *)data; 2241 addsta->mode = cmd->mode; 2242 memcpy(&addsta->sta, &cmd->sta, sizeof(struct sta_id_modify)); 2243 memcpy(&addsta->key, &cmd->key, sizeof(struct il4965_keyinfo)); 2244 addsta->station_flags = cmd->station_flags; 2245 addsta->station_flags_msk = cmd->station_flags_msk; 2246 addsta->tid_disable_tx = cpu_to_le16(0); 2247 addsta->rate_n_flags = cmd->rate_n_flags; 2248 addsta->add_immediate_ba_tid = cmd->add_immediate_ba_tid; 2249 addsta->remove_immediate_ba_tid = cmd->remove_immediate_ba_tid; 2250 addsta->add_immediate_ba_ssn = cmd->add_immediate_ba_ssn; 2251 2252 return (u16) sizeof(struct il3945_addsta_cmd); 2253 } 2254 2255 static int 2256 il3945_add_bssid_station(struct il_priv *il, const u8 * addr, u8 * sta_id_r) 2257 { 2258 int ret; 2259 u8 sta_id; 2260 unsigned long flags; 2261 2262 if (sta_id_r) 2263 *sta_id_r = IL_INVALID_STATION; 2264 2265 ret = il_add_station_common(il, addr, 0, NULL, &sta_id); 2266 if (ret) { 2267 IL_ERR("Unable to add station %pM\n", addr); 2268 return ret; 2269 } 2270 2271 if (sta_id_r) 2272 *sta_id_r = sta_id; 2273 2274 spin_lock_irqsave(&il->sta_lock, flags); 2275 il->stations[sta_id].used |= IL_STA_LOCAL; 2276 spin_unlock_irqrestore(&il->sta_lock, flags); 2277 2278 return 0; 2279 } 2280 2281 static int 2282 il3945_manage_ibss_station(struct il_priv *il, struct ieee80211_vif *vif, 2283 bool add) 2284 { 2285 struct il_vif_priv *vif_priv = (void *)vif->drv_priv; 2286 int ret; 2287 2288 if (add) { 2289 ret = 2290 il3945_add_bssid_station(il, vif->bss_conf.bssid, 2291 &vif_priv->ibss_bssid_sta_id); 2292 if (ret) 2293 return ret; 2294 2295 il3945_sync_sta(il, vif_priv->ibss_bssid_sta_id, 2296 (il->band == 2297 NL80211_BAND_5GHZ) ? RATE_6M_PLCP : 2298 RATE_1M_PLCP); 2299 il3945_rate_scale_init(il->hw, vif_priv->ibss_bssid_sta_id); 2300 2301 return 0; 2302 } 2303 2304 return il_remove_station(il, vif_priv->ibss_bssid_sta_id, 2305 vif->bss_conf.bssid); 2306 } 2307 2308 /* 2309 * il3945_init_hw_rate_table - Initialize the hardware rate fallback table 2310 */ 2311 int 2312 il3945_init_hw_rate_table(struct il_priv *il) 2313 { 2314 int rc, i, idx, prev_idx; 2315 struct il3945_rate_scaling_cmd rate_cmd = { 2316 .reserved = {0, 0, 0}, 2317 }; 2318 struct il3945_rate_scaling_info *table = rate_cmd.table; 2319 2320 for (i = 0; i < ARRAY_SIZE(il3945_rates); i++) { 2321 idx = il3945_rates[i].table_rs_idx; 2322 2323 table[idx].rate_n_flags = cpu_to_le16(il3945_rates[i].plcp); 2324 table[idx].try_cnt = il->retry_rate; 2325 prev_idx = il3945_get_prev_ieee_rate(i); 2326 table[idx].next_rate_idx = il3945_rates[prev_idx].table_rs_idx; 2327 } 2328 2329 switch (il->band) { 2330 case NL80211_BAND_5GHZ: 2331 D_RATE("Select A mode rate scale\n"); 2332 /* If one of the following CCK rates is used, 2333 * have it fall back to the 6M OFDM rate */ 2334 for (i = RATE_1M_IDX_TBL; i <= RATE_11M_IDX_TBL; i++) 2335 table[i].next_rate_idx = 2336 il3945_rates[IL_FIRST_OFDM_RATE].table_rs_idx; 2337 2338 /* Don't fall back to CCK rates */ 2339 table[RATE_12M_IDX_TBL].next_rate_idx = RATE_9M_IDX_TBL; 2340 2341 /* Don't drop out of OFDM rates */ 2342 table[RATE_6M_IDX_TBL].next_rate_idx = 2343 il3945_rates[IL_FIRST_OFDM_RATE].table_rs_idx; 2344 break; 2345 2346 case NL80211_BAND_2GHZ: 2347 D_RATE("Select B/G mode rate scale\n"); 2348 /* If an OFDM rate is used, have it fall back to the 2349 * 1M CCK rates */ 2350 2351 if (!(il->_3945.sta_supp_rates & IL_OFDM_RATES_MASK) && 2352 il_is_associated(il)) { 2353 2354 idx = IL_FIRST_CCK_RATE; 2355 for (i = RATE_6M_IDX_TBL; i <= RATE_54M_IDX_TBL; i++) 2356 table[i].next_rate_idx = 2357 il3945_rates[idx].table_rs_idx; 2358 2359 idx = RATE_11M_IDX_TBL; 2360 /* CCK shouldn't fall back to OFDM... */ 2361 table[idx].next_rate_idx = RATE_5M_IDX_TBL; 2362 } 2363 break; 2364 2365 default: 2366 WARN_ON(1); 2367 break; 2368 } 2369 2370 /* Update the rate scaling for control frame Tx */ 2371 rate_cmd.table_id = 0; 2372 rc = il_send_cmd_pdu(il, C_RATE_SCALE, sizeof(rate_cmd), &rate_cmd); 2373 if (rc) 2374 return rc; 2375 2376 /* Update the rate scaling for data frame Tx */ 2377 rate_cmd.table_id = 1; 2378 return il_send_cmd_pdu(il, C_RATE_SCALE, sizeof(rate_cmd), &rate_cmd); 2379 } 2380 2381 /* Called when initializing driver */ 2382 int 2383 il3945_hw_set_hw_params(struct il_priv *il) 2384 { 2385 memset((void *)&il->hw_params, 0, sizeof(struct il_hw_params)); 2386 2387 il->_3945.shared_virt = 2388 dma_alloc_coherent(&il->pci_dev->dev, sizeof(struct il3945_shared), 2389 &il->_3945.shared_phys, GFP_KERNEL); 2390 if (!il->_3945.shared_virt) 2391 return -ENOMEM; 2392 2393 il->hw_params.bcast_id = IL3945_BROADCAST_ID; 2394 2395 /* Assign number of Usable TX queues */ 2396 il->hw_params.max_txq_num = il->cfg->num_of_queues; 2397 2398 il->hw_params.tfd_size = sizeof(struct il3945_tfd); 2399 il->hw_params.rx_page_order = get_order(IL_RX_BUF_SIZE_3K); 2400 il->hw_params.max_rxq_size = RX_QUEUE_SIZE; 2401 il->hw_params.max_rxq_log = RX_QUEUE_SIZE_LOG; 2402 il->hw_params.max_stations = IL3945_STATION_COUNT; 2403 2404 il->sta_key_max_num = STA_KEY_MAX_NUM; 2405 2406 il->hw_params.rx_wrt_ptr_reg = FH39_RSCSR_CHNL0_WPTR; 2407 il->hw_params.max_beacon_itrvl = IL39_MAX_UCODE_BEACON_INTERVAL; 2408 il->hw_params.beacon_time_tsf_bits = IL3945_EXT_BEACON_TIME_POS; 2409 2410 return 0; 2411 } 2412 2413 unsigned int 2414 il3945_hw_get_beacon_cmd(struct il_priv *il, struct il3945_frame *frame, 2415 u8 rate) 2416 { 2417 struct il3945_tx_beacon_cmd *tx_beacon_cmd; 2418 unsigned int frame_size; 2419 2420 tx_beacon_cmd = (struct il3945_tx_beacon_cmd *)&frame->u; 2421 memset(tx_beacon_cmd, 0, sizeof(*tx_beacon_cmd)); 2422 2423 tx_beacon_cmd->tx.sta_id = il->hw_params.bcast_id; 2424 tx_beacon_cmd->tx.stop_time.life_time = TX_CMD_LIFE_TIME_INFINITE; 2425 2426 frame_size = 2427 il3945_fill_beacon_frame(il, tx_beacon_cmd->frame, 2428 sizeof(frame->u) - sizeof(*tx_beacon_cmd)); 2429 2430 BUG_ON(frame_size > MAX_MPDU_SIZE); 2431 tx_beacon_cmd->tx.len = cpu_to_le16((u16) frame_size); 2432 2433 tx_beacon_cmd->tx.rate = rate; 2434 tx_beacon_cmd->tx.tx_flags = 2435 (TX_CMD_FLG_SEQ_CTL_MSK | TX_CMD_FLG_TSF_MSK); 2436 2437 /* supp_rates[0] == OFDM start at IL_FIRST_OFDM_RATE */ 2438 tx_beacon_cmd->tx.supp_rates[0] = 2439 (IL_OFDM_BASIC_RATES_MASK >> IL_FIRST_OFDM_RATE) & 0xFF; 2440 2441 tx_beacon_cmd->tx.supp_rates[1] = (IL_CCK_BASIC_RATES_MASK & 0xF); 2442 2443 return sizeof(struct il3945_tx_beacon_cmd) + frame_size; 2444 } 2445 2446 void 2447 il3945_hw_handler_setup(struct il_priv *il) 2448 { 2449 il->handlers[C_TX] = il3945_hdl_tx; 2450 il->handlers[N_3945_RX] = il3945_hdl_rx; 2451 } 2452 2453 void 2454 il3945_hw_setup_deferred_work(struct il_priv *il) 2455 { 2456 INIT_DELAYED_WORK(&il->_3945.thermal_periodic, 2457 il3945_bg_reg_txpower_periodic); 2458 } 2459 2460 void 2461 il3945_hw_cancel_deferred_work(struct il_priv *il) 2462 { 2463 cancel_delayed_work(&il->_3945.thermal_periodic); 2464 } 2465 2466 /* check contents of special bootstrap uCode SRAM */ 2467 static int 2468 il3945_verify_bsm(struct il_priv *il) 2469 { 2470 __le32 *image = il->ucode_boot.v_addr; 2471 u32 len = il->ucode_boot.len; 2472 u32 reg; 2473 u32 val; 2474 2475 D_INFO("Begin verify bsm\n"); 2476 2477 /* verify BSM SRAM contents */ 2478 val = il_rd_prph(il, BSM_WR_DWCOUNT_REG); 2479 for (reg = BSM_SRAM_LOWER_BOUND; reg < BSM_SRAM_LOWER_BOUND + len; 2480 reg += sizeof(u32), image++) { 2481 val = il_rd_prph(il, reg); 2482 if (val != le32_to_cpu(*image)) { 2483 IL_ERR("BSM uCode verification failed at " 2484 "addr 0x%08X+%u (of %u), is 0x%x, s/b 0x%x\n", 2485 BSM_SRAM_LOWER_BOUND, reg - BSM_SRAM_LOWER_BOUND, 2486 len, val, le32_to_cpu(*image)); 2487 return -EIO; 2488 } 2489 } 2490 2491 D_INFO("BSM bootstrap uCode image OK\n"); 2492 2493 return 0; 2494 } 2495 2496 /****************************************************************************** 2497 * 2498 * EEPROM related functions 2499 * 2500 ******************************************************************************/ 2501 2502 /* 2503 * Clear the OWNER_MSK, to establish driver (instead of uCode running on 2504 * embedded controller) as EEPROM reader; each read is a series of pulses 2505 * to/from the EEPROM chip, not a single event, so even reads could conflict 2506 * if they weren't arbitrated by some ownership mechanism. Here, the driver 2507 * simply claims ownership, which should be safe when this function is called 2508 * (i.e. before loading uCode!). 2509 */ 2510 static int 2511 il3945_eeprom_acquire_semaphore(struct il_priv *il) 2512 { 2513 _il_clear_bit(il, CSR_EEPROM_GP, CSR_EEPROM_GP_IF_OWNER_MSK); 2514 return 0; 2515 } 2516 2517 static void 2518 il3945_eeprom_release_semaphore(struct il_priv *il) 2519 { 2520 return; 2521 } 2522 2523 /* 2524 * il3945_load_bsm - Load bootstrap instructions 2525 * 2526 * BSM operation: 2527 * 2528 * The Bootstrap State Machine (BSM) stores a short bootstrap uCode program 2529 * in special SRAM that does not power down during RFKILL. When powering back 2530 * up after power-saving sleeps (or during initial uCode load), the BSM loads 2531 * the bootstrap program into the on-board processor, and starts it. 2532 * 2533 * The bootstrap program loads (via DMA) instructions and data for a new 2534 * program from host DRAM locations indicated by the host driver in the 2535 * BSM_DRAM_* registers. Once the new program is loaded, it starts 2536 * automatically. 2537 * 2538 * When initializing the NIC, the host driver points the BSM to the 2539 * "initialize" uCode image. This uCode sets up some internal data, then 2540 * notifies host via "initialize alive" that it is complete. 2541 * 2542 * The host then replaces the BSM_DRAM_* pointer values to point to the 2543 * normal runtime uCode instructions and a backup uCode data cache buffer 2544 * (filled initially with starting data values for the on-board processor), 2545 * then triggers the "initialize" uCode to load and launch the runtime uCode, 2546 * which begins normal operation. 2547 * 2548 * When doing a power-save shutdown, runtime uCode saves data SRAM into 2549 * the backup data cache in DRAM before SRAM is powered down. 2550 * 2551 * When powering back up, the BSM loads the bootstrap program. This reloads 2552 * the runtime uCode instructions and the backup data cache into SRAM, 2553 * and re-launches the runtime uCode from where it left off. 2554 */ 2555 static int 2556 il3945_load_bsm(struct il_priv *il) 2557 { 2558 __le32 *image = il->ucode_boot.v_addr; 2559 u32 len = il->ucode_boot.len; 2560 dma_addr_t pinst; 2561 dma_addr_t pdata; 2562 u32 inst_len; 2563 u32 data_len; 2564 int rc; 2565 int i; 2566 u32 done; 2567 u32 reg_offset; 2568 2569 D_INFO("Begin load bsm\n"); 2570 2571 /* make sure bootstrap program is no larger than BSM's SRAM size */ 2572 if (len > IL39_MAX_BSM_SIZE) 2573 return -EINVAL; 2574 2575 /* Tell bootstrap uCode where to find the "Initialize" uCode 2576 * in host DRAM ... host DRAM physical address bits 31:0 for 3945. 2577 * NOTE: il3945_initialize_alive_start() will replace these values, 2578 * after the "initialize" uCode has run, to point to 2579 * runtime/protocol instructions and backup data cache. */ 2580 pinst = il->ucode_init.p_addr; 2581 pdata = il->ucode_init_data.p_addr; 2582 inst_len = il->ucode_init.len; 2583 data_len = il->ucode_init_data.len; 2584 2585 il_wr_prph(il, BSM_DRAM_INST_PTR_REG, pinst); 2586 il_wr_prph(il, BSM_DRAM_DATA_PTR_REG, pdata); 2587 il_wr_prph(il, BSM_DRAM_INST_BYTECOUNT_REG, inst_len); 2588 il_wr_prph(il, BSM_DRAM_DATA_BYTECOUNT_REG, data_len); 2589 2590 /* Fill BSM memory with bootstrap instructions */ 2591 for (reg_offset = BSM_SRAM_LOWER_BOUND; 2592 reg_offset < BSM_SRAM_LOWER_BOUND + len; 2593 reg_offset += sizeof(u32), image++) 2594 _il_wr_prph(il, reg_offset, le32_to_cpu(*image)); 2595 2596 rc = il3945_verify_bsm(il); 2597 if (rc) 2598 return rc; 2599 2600 /* Tell BSM to copy from BSM SRAM into instruction SRAM, when asked */ 2601 il_wr_prph(il, BSM_WR_MEM_SRC_REG, 0x0); 2602 il_wr_prph(il, BSM_WR_MEM_DST_REG, IL39_RTC_INST_LOWER_BOUND); 2603 il_wr_prph(il, BSM_WR_DWCOUNT_REG, len / sizeof(u32)); 2604 2605 /* Load bootstrap code into instruction SRAM now, 2606 * to prepare to load "initialize" uCode */ 2607 il_wr_prph(il, BSM_WR_CTRL_REG, BSM_WR_CTRL_REG_BIT_START); 2608 2609 /* Wait for load of bootstrap uCode to finish */ 2610 for (i = 0; i < 100; i++) { 2611 done = il_rd_prph(il, BSM_WR_CTRL_REG); 2612 if (!(done & BSM_WR_CTRL_REG_BIT_START)) 2613 break; 2614 udelay(10); 2615 } 2616 if (i < 100) 2617 D_INFO("BSM write complete, poll %d iterations\n", i); 2618 else { 2619 IL_ERR("BSM write did not complete!\n"); 2620 return -EIO; 2621 } 2622 2623 /* Enable future boot loads whenever power management unit triggers it 2624 * (e.g. when powering back up after power-save shutdown) */ 2625 il_wr_prph(il, BSM_WR_CTRL_REG, BSM_WR_CTRL_REG_BIT_START_EN); 2626 2627 return 0; 2628 } 2629 2630 const struct il_ops il3945_ops = { 2631 .txq_attach_buf_to_tfd = il3945_hw_txq_attach_buf_to_tfd, 2632 .txq_free_tfd = il3945_hw_txq_free_tfd, 2633 .txq_init = il3945_hw_tx_queue_init, 2634 .load_ucode = il3945_load_bsm, 2635 .dump_nic_error_log = il3945_dump_nic_error_log, 2636 .apm_init = il3945_apm_init, 2637 .send_tx_power = il3945_send_tx_power, 2638 .is_valid_rtc_data_addr = il3945_hw_valid_rtc_data_addr, 2639 .eeprom_acquire_semaphore = il3945_eeprom_acquire_semaphore, 2640 .eeprom_release_semaphore = il3945_eeprom_release_semaphore, 2641 2642 .rxon_assoc = il3945_send_rxon_assoc, 2643 .commit_rxon = il3945_commit_rxon, 2644 2645 .get_hcmd_size = il3945_get_hcmd_size, 2646 .build_addsta_hcmd = il3945_build_addsta_hcmd, 2647 .request_scan = il3945_request_scan, 2648 .post_scan = il3945_post_scan, 2649 2650 .post_associate = il3945_post_associate, 2651 .config_ap = il3945_config_ap, 2652 .manage_ibss_station = il3945_manage_ibss_station, 2653 2654 .send_led_cmd = il3945_send_led_cmd, 2655 }; 2656 2657 static const struct il_cfg il3945_bg_cfg = { 2658 .name = "3945BG", 2659 .fw_name_pre = IL3945_FW_PRE, 2660 .ucode_api_max = IL3945_UCODE_API_MAX, 2661 .ucode_api_min = IL3945_UCODE_API_MIN, 2662 .sku = IL_SKU_G, 2663 .eeprom_ver = EEPROM_3945_EEPROM_VERSION, 2664 .mod_params = &il3945_mod_params, 2665 .led_mode = IL_LED_BLINK, 2666 2667 .eeprom_size = IL3945_EEPROM_IMG_SIZE, 2668 .num_of_queues = IL39_NUM_QUEUES, 2669 .pll_cfg_val = CSR39_ANA_PLL_CFG_VAL, 2670 .set_l0s = false, 2671 .use_bsm = true, 2672 .led_compensation = 64, 2673 .wd_timeout = IL_DEF_WD_TIMEOUT, 2674 2675 .regulatory_bands = { 2676 EEPROM_REGULATORY_BAND_1_CHANNELS, 2677 EEPROM_REGULATORY_BAND_2_CHANNELS, 2678 EEPROM_REGULATORY_BAND_3_CHANNELS, 2679 EEPROM_REGULATORY_BAND_4_CHANNELS, 2680 EEPROM_REGULATORY_BAND_5_CHANNELS, 2681 EEPROM_REGULATORY_BAND_NO_HT40, 2682 EEPROM_REGULATORY_BAND_NO_HT40, 2683 }, 2684 }; 2685 2686 static const struct il_cfg il3945_abg_cfg = { 2687 .name = "3945ABG", 2688 .fw_name_pre = IL3945_FW_PRE, 2689 .ucode_api_max = IL3945_UCODE_API_MAX, 2690 .ucode_api_min = IL3945_UCODE_API_MIN, 2691 .sku = IL_SKU_A | IL_SKU_G, 2692 .eeprom_ver = EEPROM_3945_EEPROM_VERSION, 2693 .mod_params = &il3945_mod_params, 2694 .led_mode = IL_LED_BLINK, 2695 2696 .eeprom_size = IL3945_EEPROM_IMG_SIZE, 2697 .num_of_queues = IL39_NUM_QUEUES, 2698 .pll_cfg_val = CSR39_ANA_PLL_CFG_VAL, 2699 .set_l0s = false, 2700 .use_bsm = true, 2701 .led_compensation = 64, 2702 .wd_timeout = IL_DEF_WD_TIMEOUT, 2703 2704 .regulatory_bands = { 2705 EEPROM_REGULATORY_BAND_1_CHANNELS, 2706 EEPROM_REGULATORY_BAND_2_CHANNELS, 2707 EEPROM_REGULATORY_BAND_3_CHANNELS, 2708 EEPROM_REGULATORY_BAND_4_CHANNELS, 2709 EEPROM_REGULATORY_BAND_5_CHANNELS, 2710 EEPROM_REGULATORY_BAND_NO_HT40, 2711 EEPROM_REGULATORY_BAND_NO_HT40, 2712 }, 2713 }; 2714 2715 const struct pci_device_id il3945_hw_card_ids[] = { 2716 {IL_PCI_DEVICE(0x4222, 0x1005, il3945_bg_cfg)}, 2717 {IL_PCI_DEVICE(0x4222, 0x1034, il3945_bg_cfg)}, 2718 {IL_PCI_DEVICE(0x4222, 0x1044, il3945_bg_cfg)}, 2719 {IL_PCI_DEVICE(0x4227, 0x1014, il3945_bg_cfg)}, 2720 {IL_PCI_DEVICE(0x4222, PCI_ANY_ID, il3945_abg_cfg)}, 2721 {IL_PCI_DEVICE(0x4227, PCI_ANY_ID, il3945_abg_cfg)}, 2722 {0} 2723 }; 2724 2725 MODULE_DEVICE_TABLE(pci, il3945_hw_card_ids); 2726