1# SPDX-License-Identifier: GPL-2.0-only 2# 3# Intel Centrino wireless drivers 4# 5 6config IPW2100 7 tristate "Intel PRO/Wireless 2100 Network Connection" 8 depends on PCI && CFG80211 9 select WIRELESS_EXT 10 select WEXT_SPY 11 select WEXT_PRIV 12 select FW_LOADER 13 select LIB80211 14 select LIBIPW 15 help 16 A driver for the Intel PRO/Wireless 2100 Network 17 Connection 802.11b wireless network adapter. 18 19 See <file:Documentation/networking/device_drivers/wifi/intel/ipw2100.rst> 20 for information on the capabilities currently enabled in this driver 21 and for tips for debugging issues and problems. 22 23 In order to use this driver, you will need a firmware image for it. 24 You can obtain the firmware from 25 <http://ipw2100.sf.net/>. Once you have the firmware image, you 26 will need to place it in /lib/firmware. 27 28 You will also very likely need the Wireless Tools in order to 29 configure your card: 30 31 <https://www.hpl.hp.com/personal/Jean_Tourrilhes/Linux/Tools.html>. 32 33 It is recommended that you compile this driver as a module (M) 34 rather than built-in (Y). This driver requires firmware at device 35 initialization time, and when built-in this typically happens 36 before the filesystem is accessible (hence firmware will be 37 unavailable and initialization will fail). If you do choose to build 38 this driver into your kernel image, you can avoid this problem by 39 including the firmware and a firmware loader in an initramfs. 40 41config IPW2100_MONITOR 42 bool "Enable promiscuous mode" 43 depends on IPW2100 44 help 45 Enables promiscuous/monitor mode support for the ipw2100 driver. 46 With this feature compiled into the driver, you can switch to 47 promiscuous mode via the Wireless Tool's Monitor mode. While in this 48 mode, no packets can be sent. 49 50config IPW2100_DEBUG 51 bool "Enable full debugging output in IPW2100 module." 52 depends on IPW2100 53 help 54 This option will enable debug tracing output for the IPW2100. 55 56 This will result in the kernel module being ~60k larger. You can 57 control which debug output is sent to the kernel log by setting the 58 value in 59 60 /sys/bus/pci/drivers/ipw2100/debug_level 61 62 This entry will only exist if this option is enabled. 63 64 If you are not trying to debug or develop the IPW2100 driver, you 65 most likely want to say N here. 66 67config IPW2200 68 tristate "Intel PRO/Wireless 2200BG and 2915ABG Network Connection" 69 depends on PCI && CFG80211 70 select CFG80211_WEXT_EXPORT 71 select WIRELESS_EXT 72 select WEXT_SPY 73 select WEXT_PRIV 74 select FW_LOADER 75 select LIB80211 76 select LIBIPW 77 help 78 A driver for the Intel PRO/Wireless 2200BG and 2915ABG Network 79 Connection adapters. 80 81 See <file:Documentation/networking/device_drivers/wifi/intel/ipw2200.rst> 82 for information on the capabilities currently enabled in this 83 driver and for tips for debugging issues and problems. 84 85 In order to use this driver, you will need a firmware image for it. 86 You can obtain the firmware from 87 <http://ipw2200.sf.net/>. See the above referenced README.ipw2200 88 for information on where to install the firmware images. 89 90 You will also very likely need the Wireless Tools in order to 91 configure your card: 92 93 <https://www.hpl.hp.com/personal/Jean_Tourrilhes/Linux/Tools.html>. 94 95 It is recommended that you compile this driver as a module (M) 96 rather than built-in (Y). This driver requires firmware at device 97 initialization time, and when built-in this typically happens 98 before the filesystem is accessible (hence firmware will be 99 unavailable and initialization will fail). If you do choose to build 100 this driver into your kernel image, you can avoid this problem by 101 including the firmware and a firmware loader in an initramfs. 102 103config IPW2200_MONITOR 104 bool "Enable promiscuous mode" 105 depends on IPW2200 106 help 107 Enables promiscuous/monitor mode support for the ipw2200 driver. 108 With this feature compiled into the driver, you can switch to 109 promiscuous mode via the Wireless Tool's Monitor mode. While in this 110 mode, no packets can be sent. 111 112config IPW2200_RADIOTAP 113 bool "Enable radiotap format 802.11 raw packet support" 114 depends on IPW2200_MONITOR 115 116config IPW2200_PROMISCUOUS 117 bool "Enable creation of a RF radiotap promiscuous interface" 118 depends on IPW2200_MONITOR 119 select IPW2200_RADIOTAP 120 help 121 Enables the creation of a second interface prefixed 'rtap'. 122 This second interface will provide every received in radiotap 123 format. 124 125 This is useful for performing wireless network analysis while 126 maintaining an active association. 127 128 Example usage: 129 130 % modprobe ipw2200 rtap_iface=1 131 % ifconfig rtap0 up 132 % tethereal -i rtap0 133 134 If you do not specify 'rtap_iface=1' as a module parameter then 135 the rtap interface will not be created and you will need to turn 136 it on via sysfs: 137 138 % echo 1 > /sys/bus/pci/drivers/ipw2200/*/rtap_iface 139 140config IPW2200_QOS 141 bool "Enable QoS support" 142 depends on IPW2200 143 144config IPW2200_DEBUG 145 bool "Enable full debugging output in IPW2200 module." 146 depends on IPW2200 147 help 148 This option will enable low level debug tracing output for IPW2200. 149 150 Note, normal debug code is already compiled in. This low level 151 debug option enables debug on hot paths (e.g Tx, Rx, ISR) and 152 will result in the kernel module being ~70 larger. Most users 153 will typically not need this high verbosity debug information. 154 155 If you are not sure, say N here. 156 157config LIBIPW 158 tristate 159 depends on PCI && CFG80211 160 select WIRELESS_EXT 161 select WEXT_SPY 162 select CRYPTO 163 select CRYPTO_ARC4 164 select CRYPTO_ECB 165 select CRYPTO_AES 166 select CRYPTO_MICHAEL_MIC 167 select CRYPTO_ECB 168 select CRC32 169 select LIB80211 170 select LIB80211_CRYPT_WEP 171 select LIB80211_CRYPT_TKIP 172 select LIB80211_CRYPT_CCMP 173 help 174 This option enables the hardware independent IEEE 802.11 175 networking stack. This component is deprecated in favor of the 176 mac80211 component. 177 178config LIBIPW_DEBUG 179 bool "Full debugging output for the LIBIPW component" 180 depends on LIBIPW 181 help 182 This option will enable debug tracing output for the 183 libipw component. 184 185 This will result in the kernel module being ~70k larger. You 186 can control which debug output is sent to the kernel log by 187 setting the value in 188 189 /proc/net/ieee80211/debug_level 190 191 For example: 192 193 % echo 0x00000FFO > /proc/net/ieee80211/debug_level 194 195 For a list of values you can assign to debug_level, you 196 can look at the bit mask values in ieee80211.h 197 198 If you are not trying to debug or develop the libipw 199 component, you most likely want to say N here. 200