xref: /linux/drivers/net/wireless/broadcom/brcm80211/brcmsmac/mac80211_if.c (revision 60a2f25de7b8b785baee2932db932ae9a5b8c86d)
1 /*
2  * Copyright (c) 2010 Broadcom Corporation
3  * Copyright (c) 2013 Hauke Mehrtens <hauke@hauke-m.de>
4  *
5  * Permission to use, copy, modify, and/or distribute this software for any
6  * purpose with or without fee is hereby granted, provided that the above
7  * copyright notice and this permission notice appear in all copies.
8  *
9  * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
10  * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
11  * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY
12  * SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
13  * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION
14  * OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN
15  * CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
16  */
17 
18 #define __UNDEF_NO_VERSION__
19 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
20 
21 #include <linux/etherdevice.h>
22 #include <linux/sched.h>
23 #include <linux/firmware.h>
24 #include <linux/interrupt.h>
25 #include <linux/module.h>
26 #include <linux/bcma/bcma.h>
27 #include <net/mac80211.h>
28 #include <defs.h>
29 #include "phy/phy_int.h"
30 #include "d11.h"
31 #include "channel.h"
32 #include "scb.h"
33 #include "pub.h"
34 #include "ucode_loader.h"
35 #include "mac80211_if.h"
36 #include "main.h"
37 #include "debug.h"
38 #include "led.h"
39 
40 #define N_TX_QUEUES	4 /* #tx queues on mac80211<->driver interface */
41 #define BRCMS_FLUSH_TIMEOUT	500 /* msec */
42 
43 /* Flags we support */
44 #define MAC_FILTERS (FIF_ALLMULTI | \
45 	FIF_FCSFAIL | \
46 	FIF_CONTROL | \
47 	FIF_OTHER_BSS | \
48 	FIF_BCN_PRBRESP_PROMISC | \
49 	FIF_PSPOLL)
50 
51 #define CHAN2GHZ(channel, freqency, chflags)  { \
52 	.band = NL80211_BAND_2GHZ, \
53 	.center_freq = (freqency), \
54 	.hw_value = (channel), \
55 	.flags = chflags, \
56 	.max_antenna_gain = 0, \
57 	.max_power = 19, \
58 }
59 
60 #define CHAN5GHZ(channel, chflags)  { \
61 	.band = NL80211_BAND_5GHZ, \
62 	.center_freq = 5000 + 5*(channel), \
63 	.hw_value = (channel), \
64 	.flags = chflags, \
65 	.max_antenna_gain = 0, \
66 	.max_power = 21, \
67 }
68 
69 #define RATE(rate100m, _flags) { \
70 	.bitrate = (rate100m), \
71 	.flags = (_flags), \
72 	.hw_value = (rate100m / 5), \
73 }
74 
75 struct firmware_hdr {
76 	__le32 offset;
77 	__le32 len;
78 	__le32 idx;
79 };
80 
81 static const char * const brcms_firmwares[MAX_FW_IMAGES] = {
82 	"brcm/bcm43xx",
83 	NULL
84 };
85 
86 static int n_adapters_found;
87 
88 MODULE_AUTHOR("Broadcom Corporation");
89 MODULE_DESCRIPTION("Broadcom 802.11n wireless LAN driver.");
90 MODULE_LICENSE("Dual BSD/GPL");
91 /* This needs to be adjusted when brcms_firmwares changes */
92 MODULE_FIRMWARE("brcm/bcm43xx-0.fw");
93 MODULE_FIRMWARE("brcm/bcm43xx_hdr-0.fw");
94 
95 /* recognized BCMA Core IDs */
96 static struct bcma_device_id brcms_coreid_table[] = {
97 	BCMA_CORE(BCMA_MANUF_BCM, BCMA_CORE_80211, 17, BCMA_ANY_CLASS),
98 	BCMA_CORE(BCMA_MANUF_BCM, BCMA_CORE_80211, 23, BCMA_ANY_CLASS),
99 	BCMA_CORE(BCMA_MANUF_BCM, BCMA_CORE_80211, 24, BCMA_ANY_CLASS),
100 	{},
101 };
102 MODULE_DEVICE_TABLE(bcma, brcms_coreid_table);
103 
104 #if defined(CONFIG_BRCMDBG)
105 /*
106  * Module parameter for setting the debug message level. Available
107  * flags are specified by the BRCM_DL_* macros in
108  * drivers/net/wireless/brcm80211/include/defs.h.
109  */
110 module_param_named(debug, brcm_msg_level, uint, 0644);
111 #endif
112 
113 static struct ieee80211_channel brcms_2ghz_chantable[] = {
114 	CHAN2GHZ(1, 2412, IEEE80211_CHAN_NO_HT40MINUS),
115 	CHAN2GHZ(2, 2417, IEEE80211_CHAN_NO_HT40MINUS),
116 	CHAN2GHZ(3, 2422, IEEE80211_CHAN_NO_HT40MINUS),
117 	CHAN2GHZ(4, 2427, IEEE80211_CHAN_NO_HT40MINUS),
118 	CHAN2GHZ(5, 2432, 0),
119 	CHAN2GHZ(6, 2437, 0),
120 	CHAN2GHZ(7, 2442, 0),
121 	CHAN2GHZ(8, 2447, IEEE80211_CHAN_NO_HT40PLUS),
122 	CHAN2GHZ(9, 2452, IEEE80211_CHAN_NO_HT40PLUS),
123 	CHAN2GHZ(10, 2457, IEEE80211_CHAN_NO_HT40PLUS),
124 	CHAN2GHZ(11, 2462, IEEE80211_CHAN_NO_HT40PLUS),
125 	CHAN2GHZ(12, 2467,
126 		 IEEE80211_CHAN_NO_IR |
127 		 IEEE80211_CHAN_NO_HT40PLUS),
128 	CHAN2GHZ(13, 2472,
129 		 IEEE80211_CHAN_NO_IR |
130 		 IEEE80211_CHAN_NO_HT40PLUS),
131 	CHAN2GHZ(14, 2484,
132 		 IEEE80211_CHAN_NO_IR |
133 		 IEEE80211_CHAN_NO_HT40PLUS | IEEE80211_CHAN_NO_HT40MINUS |
134 		 IEEE80211_CHAN_NO_OFDM)
135 };
136 
137 static struct ieee80211_channel brcms_5ghz_nphy_chantable[] = {
138 	/* UNII-1 */
139 	CHAN5GHZ(36, IEEE80211_CHAN_NO_HT40MINUS),
140 	CHAN5GHZ(40, IEEE80211_CHAN_NO_HT40PLUS),
141 	CHAN5GHZ(44, IEEE80211_CHAN_NO_HT40MINUS),
142 	CHAN5GHZ(48, IEEE80211_CHAN_NO_HT40PLUS),
143 	/* UNII-2 */
144 	CHAN5GHZ(52,
145 		 IEEE80211_CHAN_RADAR |
146 		 IEEE80211_CHAN_NO_IR | IEEE80211_CHAN_NO_HT40MINUS),
147 	CHAN5GHZ(56,
148 		 IEEE80211_CHAN_RADAR |
149 		 IEEE80211_CHAN_NO_IR | IEEE80211_CHAN_NO_HT40PLUS),
150 	CHAN5GHZ(60,
151 		 IEEE80211_CHAN_RADAR |
152 		 IEEE80211_CHAN_NO_IR | IEEE80211_CHAN_NO_HT40MINUS),
153 	CHAN5GHZ(64,
154 		 IEEE80211_CHAN_RADAR |
155 		 IEEE80211_CHAN_NO_IR | IEEE80211_CHAN_NO_HT40PLUS),
156 	/* MID */
157 	CHAN5GHZ(100,
158 		 IEEE80211_CHAN_RADAR |
159 		 IEEE80211_CHAN_NO_IR | IEEE80211_CHAN_NO_HT40MINUS),
160 	CHAN5GHZ(104,
161 		 IEEE80211_CHAN_RADAR |
162 		 IEEE80211_CHAN_NO_IR | IEEE80211_CHAN_NO_HT40PLUS),
163 	CHAN5GHZ(108,
164 		 IEEE80211_CHAN_RADAR |
165 		 IEEE80211_CHAN_NO_IR | IEEE80211_CHAN_NO_HT40MINUS),
166 	CHAN5GHZ(112,
167 		 IEEE80211_CHAN_RADAR |
168 		 IEEE80211_CHAN_NO_IR | IEEE80211_CHAN_NO_HT40PLUS),
169 	CHAN5GHZ(116,
170 		 IEEE80211_CHAN_RADAR |
171 		 IEEE80211_CHAN_NO_IR | IEEE80211_CHAN_NO_HT40MINUS),
172 	CHAN5GHZ(120,
173 		 IEEE80211_CHAN_RADAR |
174 		 IEEE80211_CHAN_NO_IR | IEEE80211_CHAN_NO_HT40PLUS),
175 	CHAN5GHZ(124,
176 		 IEEE80211_CHAN_RADAR |
177 		 IEEE80211_CHAN_NO_IR | IEEE80211_CHAN_NO_HT40MINUS),
178 	CHAN5GHZ(128,
179 		 IEEE80211_CHAN_RADAR |
180 		 IEEE80211_CHAN_NO_IR | IEEE80211_CHAN_NO_HT40PLUS),
181 	CHAN5GHZ(132,
182 		 IEEE80211_CHAN_RADAR |
183 		 IEEE80211_CHAN_NO_IR | IEEE80211_CHAN_NO_HT40MINUS),
184 	CHAN5GHZ(136,
185 		 IEEE80211_CHAN_RADAR |
186 		 IEEE80211_CHAN_NO_IR | IEEE80211_CHAN_NO_HT40PLUS),
187 	CHAN5GHZ(140,
188 		 IEEE80211_CHAN_RADAR |
189 		 IEEE80211_CHAN_NO_IR | IEEE80211_CHAN_NO_HT40PLUS |
190 		 IEEE80211_CHAN_NO_HT40MINUS),
191 	/* UNII-3 */
192 	CHAN5GHZ(149, IEEE80211_CHAN_NO_HT40MINUS),
193 	CHAN5GHZ(153, IEEE80211_CHAN_NO_HT40PLUS),
194 	CHAN5GHZ(157, IEEE80211_CHAN_NO_HT40MINUS),
195 	CHAN5GHZ(161, IEEE80211_CHAN_NO_HT40PLUS),
196 	CHAN5GHZ(165, IEEE80211_CHAN_NO_HT40PLUS | IEEE80211_CHAN_NO_HT40MINUS)
197 };
198 
199 /*
200  * The rate table is used for both 2.4G and 5G rates. The
201  * latter being a subset as it does not support CCK rates.
202  */
203 static struct ieee80211_rate legacy_ratetable[] = {
204 	RATE(10, 0),
205 	RATE(20, IEEE80211_RATE_SHORT_PREAMBLE),
206 	RATE(55, IEEE80211_RATE_SHORT_PREAMBLE),
207 	RATE(110, IEEE80211_RATE_SHORT_PREAMBLE),
208 	RATE(60, 0),
209 	RATE(90, 0),
210 	RATE(120, 0),
211 	RATE(180, 0),
212 	RATE(240, 0),
213 	RATE(360, 0),
214 	RATE(480, 0),
215 	RATE(540, 0),
216 };
217 
218 static const struct ieee80211_supported_band brcms_band_2GHz_nphy_template = {
219 	.band = NL80211_BAND_2GHZ,
220 	.channels = brcms_2ghz_chantable,
221 	.n_channels = ARRAY_SIZE(brcms_2ghz_chantable),
222 	.bitrates = legacy_ratetable,
223 	.n_bitrates = ARRAY_SIZE(legacy_ratetable),
224 	.ht_cap = {
225 		   /* from include/linux/ieee80211.h */
226 		   .cap = IEEE80211_HT_CAP_GRN_FLD |
227 			  IEEE80211_HT_CAP_SGI_20 | IEEE80211_HT_CAP_SGI_40,
228 		   .ht_supported = true,
229 		   .ampdu_factor = IEEE80211_HT_MAX_AMPDU_64K,
230 		   .ampdu_density = AMPDU_DEF_MPDU_DENSITY,
231 		   .mcs = {
232 			   /* placeholders for now */
233 			   .rx_mask = {0xff, 0xff, 0, 0, 0, 0, 0, 0, 0, 0},
234 			   .rx_highest = cpu_to_le16(500),
235 			   .tx_params = IEEE80211_HT_MCS_TX_DEFINED}
236 		   }
237 };
238 
239 static const struct ieee80211_supported_band brcms_band_5GHz_nphy_template = {
240 	.band = NL80211_BAND_5GHZ,
241 	.channels = brcms_5ghz_nphy_chantable,
242 	.n_channels = ARRAY_SIZE(brcms_5ghz_nphy_chantable),
243 	.bitrates = legacy_ratetable + BRCMS_LEGACY_5G_RATE_OFFSET,
244 	.n_bitrates = ARRAY_SIZE(legacy_ratetable) -
245 			BRCMS_LEGACY_5G_RATE_OFFSET,
246 	.ht_cap = {
247 		   .cap = IEEE80211_HT_CAP_GRN_FLD | IEEE80211_HT_CAP_SGI_20 |
248 			  IEEE80211_HT_CAP_SGI_40,
249 		   .ht_supported = true,
250 		   .ampdu_factor = IEEE80211_HT_MAX_AMPDU_64K,
251 		   .ampdu_density = AMPDU_DEF_MPDU_DENSITY,
252 		   .mcs = {
253 			   /* placeholders for now */
254 			   .rx_mask = {0xff, 0xff, 0, 0, 0, 0, 0, 0, 0, 0},
255 			   .rx_highest = cpu_to_le16(500),
256 			   .tx_params = IEEE80211_HT_MCS_TX_DEFINED}
257 		   }
258 };
259 
260 /* flags the given rate in rateset as requested */
261 static void brcms_set_basic_rate(struct brcm_rateset *rs, u16 rate, bool is_br)
262 {
263 	u32 i;
264 
265 	for (i = 0; i < rs->count; i++) {
266 		if (rate != (rs->rates[i] & 0x7f))
267 			continue;
268 
269 		if (is_br)
270 			rs->rates[i] |= BRCMS_RATE_FLAG;
271 		else
272 			rs->rates[i] &= BRCMS_RATE_MASK;
273 		return;
274 	}
275 }
276 
277 /*
278  * This function frees the WL per-device resources.
279  *
280  * This function frees resources owned by the WL device pointed to
281  * by the wl parameter.
282  *
283  * precondition: can both be called locked and unlocked
284  */
285 static void brcms_free(struct brcms_info *wl)
286 {
287 	struct brcms_timer *t, *next;
288 
289 	/* free ucode data */
290 	if (wl->fw.fw_cnt)
291 		brcms_ucode_data_free(&wl->ucode);
292 	if (wl->irq)
293 		free_irq(wl->irq, wl);
294 
295 	/* kill dpc */
296 	tasklet_kill(&wl->tasklet);
297 
298 	if (wl->pub) {
299 		brcms_debugfs_detach(wl->pub);
300 		brcms_c_module_unregister(wl->pub, "linux", wl);
301 	}
302 
303 	/* free common resources */
304 	if (wl->wlc) {
305 		brcms_c_detach(wl->wlc);
306 		wl->wlc = NULL;
307 		wl->pub = NULL;
308 	}
309 
310 	/* virtual interface deletion is deferred so we cannot spinwait */
311 
312 	/* wait for all pending callbacks to complete */
313 	while (atomic_read(&wl->callbacks) > 0)
314 		schedule();
315 
316 	/* free timers */
317 	for (t = wl->timers; t; t = next) {
318 		next = t->next;
319 #ifdef DEBUG
320 		kfree(t->name);
321 #endif
322 		kfree(t);
323 	}
324 }
325 
326 /*
327 * called from both kernel as from this kernel module (error flow on attach)
328 * precondition: perimeter lock is not acquired.
329 */
330 static void brcms_remove(struct bcma_device *pdev)
331 {
332 	struct ieee80211_hw *hw = bcma_get_drvdata(pdev);
333 	struct brcms_info *wl = hw->priv;
334 
335 	if (wl->wlc) {
336 		brcms_led_unregister(wl);
337 		wiphy_rfkill_set_hw_state(wl->pub->ieee_hw->wiphy, false);
338 		wiphy_rfkill_stop_polling(wl->pub->ieee_hw->wiphy);
339 		ieee80211_unregister_hw(hw);
340 	}
341 
342 	brcms_free(wl);
343 
344 	bcma_set_drvdata(pdev, NULL);
345 	ieee80211_free_hw(hw);
346 }
347 
348 /*
349  * Precondition: Since this function is called in brcms_pci_probe() context,
350  * no locking is required.
351  */
352 static void brcms_release_fw(struct brcms_info *wl)
353 {
354 	int i;
355 	for (i = 0; i < MAX_FW_IMAGES; i++) {
356 		release_firmware(wl->fw.fw_bin[i]);
357 		release_firmware(wl->fw.fw_hdr[i]);
358 	}
359 }
360 
361 /*
362  * Precondition: Since this function is called in brcms_pci_probe() context,
363  * no locking is required.
364  */
365 static int brcms_request_fw(struct brcms_info *wl, struct bcma_device *pdev)
366 {
367 	int status;
368 	struct device *device = &pdev->dev;
369 	char fw_name[100];
370 	int i;
371 
372 	memset(&wl->fw, 0, sizeof(struct brcms_firmware));
373 	for (i = 0; i < MAX_FW_IMAGES; i++) {
374 		if (brcms_firmwares[i] == NULL)
375 			break;
376 		sprintf(fw_name, "%s-%d.fw", brcms_firmwares[i],
377 			UCODE_LOADER_API_VER);
378 		status = request_firmware(&wl->fw.fw_bin[i], fw_name, device);
379 		if (status) {
380 			wiphy_err(wl->wiphy, "%s: fail to load firmware %s\n",
381 				  KBUILD_MODNAME, fw_name);
382 			return status;
383 		}
384 		sprintf(fw_name, "%s_hdr-%d.fw", brcms_firmwares[i],
385 			UCODE_LOADER_API_VER);
386 		status = request_firmware(&wl->fw.fw_hdr[i], fw_name, device);
387 		if (status) {
388 			wiphy_err(wl->wiphy, "%s: fail to load firmware %s\n",
389 				  KBUILD_MODNAME, fw_name);
390 			return status;
391 		}
392 		wl->fw.hdr_num_entries[i] =
393 		    wl->fw.fw_hdr[i]->size / (sizeof(struct firmware_hdr));
394 	}
395 	wl->fw.fw_cnt = i;
396 	status = brcms_ucode_data_init(wl, &wl->ucode);
397 	brcms_release_fw(wl);
398 	return status;
399 }
400 
401 static void brcms_ops_tx(struct ieee80211_hw *hw,
402 			 struct ieee80211_tx_control *control,
403 			 struct sk_buff *skb)
404 {
405 	struct brcms_info *wl = hw->priv;
406 	struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(skb);
407 
408 	spin_lock_bh(&wl->lock);
409 	if (!wl->pub->up) {
410 		brcms_err(wl->wlc->hw->d11core, "ops->tx called while down\n");
411 		kfree_skb(skb);
412 		goto done;
413 	}
414 	if (brcms_c_sendpkt_mac80211(wl->wlc, skb, hw))
415 		tx_info->rate_driver_data[0] = control->sta;
416  done:
417 	spin_unlock_bh(&wl->lock);
418 }
419 
420 static int brcms_ops_start(struct ieee80211_hw *hw)
421 {
422 	struct brcms_info *wl = hw->priv;
423 	bool blocked;
424 	int err;
425 
426 	if (!wl->ucode.bcm43xx_bomminor) {
427 		err = brcms_request_fw(wl, wl->wlc->hw->d11core);
428 		if (err)
429 			return -ENOENT;
430 	}
431 
432 	ieee80211_wake_queues(hw);
433 	spin_lock_bh(&wl->lock);
434 	blocked = brcms_rfkill_set_hw_state(wl);
435 	spin_unlock_bh(&wl->lock);
436 	if (!blocked)
437 		wiphy_rfkill_stop_polling(wl->pub->ieee_hw->wiphy);
438 
439 	spin_lock_bh(&wl->lock);
440 	/* avoid acknowledging frames before a non-monitor device is added */
441 	wl->mute_tx = true;
442 
443 	if (!wl->pub->up)
444 		if (!blocked)
445 			err = brcms_up(wl);
446 		else
447 			err = -ERFKILL;
448 	else
449 		err = -ENODEV;
450 	spin_unlock_bh(&wl->lock);
451 
452 	if (err != 0)
453 		brcms_err(wl->wlc->hw->d11core, "%s: brcms_up() returned %d\n",
454 			  __func__, err);
455 
456 	bcma_core_pci_power_save(wl->wlc->hw->d11core->bus, true);
457 	return err;
458 }
459 
460 static void brcms_ops_stop(struct ieee80211_hw *hw)
461 {
462 	struct brcms_info *wl = hw->priv;
463 	int status;
464 
465 	ieee80211_stop_queues(hw);
466 
467 	if (wl->wlc == NULL)
468 		return;
469 
470 	spin_lock_bh(&wl->lock);
471 	status = brcms_c_chipmatch(wl->wlc->hw->d11core);
472 	spin_unlock_bh(&wl->lock);
473 	if (!status) {
474 		brcms_err(wl->wlc->hw->d11core,
475 			  "wl: brcms_ops_stop: chipmatch failed\n");
476 		return;
477 	}
478 
479 	bcma_core_pci_power_save(wl->wlc->hw->d11core->bus, false);
480 
481 	/* put driver in down state */
482 	spin_lock_bh(&wl->lock);
483 	brcms_down(wl);
484 	spin_unlock_bh(&wl->lock);
485 }
486 
487 static int
488 brcms_ops_add_interface(struct ieee80211_hw *hw, struct ieee80211_vif *vif)
489 {
490 	struct brcms_info *wl = hw->priv;
491 
492 	/* Just STA, AP and ADHOC for now */
493 	if (vif->type != NL80211_IFTYPE_STATION &&
494 	    vif->type != NL80211_IFTYPE_AP &&
495 	    vif->type != NL80211_IFTYPE_ADHOC) {
496 		brcms_err(wl->wlc->hw->d11core,
497 			  "%s: Attempt to add type %d, only STA, AP and AdHoc for now\n",
498 			  __func__, vif->type);
499 		return -EOPNOTSUPP;
500 	}
501 
502 	spin_lock_bh(&wl->lock);
503 	wl->wlc->vif = vif;
504 	wl->mute_tx = false;
505 	brcms_c_mute(wl->wlc, false);
506 	if (vif->type == NL80211_IFTYPE_STATION)
507 		brcms_c_start_station(wl->wlc, vif->addr);
508 	else if (vif->type == NL80211_IFTYPE_AP)
509 		brcms_c_start_ap(wl->wlc, vif->addr, vif->bss_conf.bssid,
510 				 vif->cfg.ssid, vif->cfg.ssid_len);
511 	else if (vif->type == NL80211_IFTYPE_ADHOC)
512 		brcms_c_start_adhoc(wl->wlc, vif->addr);
513 	spin_unlock_bh(&wl->lock);
514 
515 	return 0;
516 }
517 
518 static void
519 brcms_ops_remove_interface(struct ieee80211_hw *hw, struct ieee80211_vif *vif)
520 {
521 	struct brcms_info *wl = hw->priv;
522 
523 	spin_lock_bh(&wl->lock);
524 	wl->wlc->vif = NULL;
525 	spin_unlock_bh(&wl->lock);
526 }
527 
528 static int brcms_ops_config(struct ieee80211_hw *hw, u32 changed)
529 {
530 	struct ieee80211_conf *conf = &hw->conf;
531 	struct brcms_info *wl = hw->priv;
532 	struct bcma_device *core = wl->wlc->hw->d11core;
533 	int err = 0;
534 	int new_int;
535 
536 	spin_lock_bh(&wl->lock);
537 	if (changed & IEEE80211_CONF_CHANGE_LISTEN_INTERVAL) {
538 		brcms_c_set_beacon_listen_interval(wl->wlc,
539 						   conf->listen_interval);
540 	}
541 	if (changed & IEEE80211_CONF_CHANGE_MONITOR)
542 		brcms_dbg_info(core, "%s: change monitor mode: %s\n",
543 			       __func__, conf->flags & IEEE80211_CONF_MONITOR ?
544 			       "true" : "false");
545 	if (changed & IEEE80211_CONF_CHANGE_PS)
546 		brcms_err(core, "%s: change power-save mode: %s (implement)\n",
547 			  __func__, conf->flags & IEEE80211_CONF_PS ?
548 			  "true" : "false");
549 
550 	if (changed & IEEE80211_CONF_CHANGE_POWER) {
551 		err = brcms_c_set_tx_power(wl->wlc, conf->power_level);
552 		if (err < 0) {
553 			brcms_err(core, "%s: Error setting power_level\n",
554 				  __func__);
555 			goto config_out;
556 		}
557 		new_int = brcms_c_get_tx_power(wl->wlc);
558 		if (new_int != conf->power_level)
559 			brcms_err(core,
560 				  "%s: Power level req != actual, %d %d\n",
561 				  __func__, conf->power_level,
562 				  new_int);
563 	}
564 	if (changed & IEEE80211_CONF_CHANGE_CHANNEL) {
565 		if (conf->chandef.width == NL80211_CHAN_WIDTH_20 ||
566 		    conf->chandef.width == NL80211_CHAN_WIDTH_20_NOHT)
567 			err = brcms_c_set_channel(wl->wlc,
568 						  conf->chandef.chan->hw_value);
569 		else
570 			err = -ENOTSUPP;
571 	}
572 	if (changed & IEEE80211_CONF_CHANGE_RETRY_LIMITS)
573 		err = brcms_c_set_rate_limit(wl->wlc,
574 					     conf->short_frame_max_tx_count,
575 					     conf->long_frame_max_tx_count);
576 
577  config_out:
578 	spin_unlock_bh(&wl->lock);
579 	return err;
580 }
581 
582 static void
583 brcms_ops_bss_info_changed(struct ieee80211_hw *hw,
584 			struct ieee80211_vif *vif,
585 			struct ieee80211_bss_conf *info, u64 changed)
586 {
587 	struct brcms_info *wl = hw->priv;
588 	struct bcma_device *core = wl->wlc->hw->d11core;
589 
590 	if (changed & BSS_CHANGED_ASSOC) {
591 		/* association status changed (associated/disassociated)
592 		 * also implies a change in the AID.
593 		 */
594 		brcms_err(core, "%s: %s: %sassociated\n", KBUILD_MODNAME,
595 			  __func__, vif->cfg.assoc ? "" : "dis");
596 		spin_lock_bh(&wl->lock);
597 		brcms_c_associate_upd(wl->wlc, vif->cfg.assoc);
598 		spin_unlock_bh(&wl->lock);
599 	}
600 	if (changed & BSS_CHANGED_ERP_SLOT) {
601 		s8 val;
602 
603 		/* slot timing changed */
604 		if (info->use_short_slot)
605 			val = 1;
606 		else
607 			val = 0;
608 		spin_lock_bh(&wl->lock);
609 		brcms_c_set_shortslot_override(wl->wlc, val);
610 		spin_unlock_bh(&wl->lock);
611 	}
612 
613 	if (changed & BSS_CHANGED_HT) {
614 		/* 802.11n parameters changed */
615 		u16 mode = info->ht_operation_mode;
616 
617 		spin_lock_bh(&wl->lock);
618 		brcms_c_protection_upd(wl->wlc, BRCMS_PROT_N_CFG,
619 			mode & IEEE80211_HT_OP_MODE_PROTECTION);
620 		brcms_c_protection_upd(wl->wlc, BRCMS_PROT_N_NONGF,
621 			mode & IEEE80211_HT_OP_MODE_NON_GF_STA_PRSNT);
622 		brcms_c_protection_upd(wl->wlc, BRCMS_PROT_N_OBSS,
623 			mode & IEEE80211_HT_OP_MODE_NON_HT_STA_PRSNT);
624 		spin_unlock_bh(&wl->lock);
625 	}
626 	if (changed & BSS_CHANGED_BASIC_RATES) {
627 		struct ieee80211_supported_band *bi;
628 		u32 br_mask, i;
629 		u16 rate;
630 		struct brcm_rateset rs;
631 		int error;
632 
633 		/* retrieve the current rates */
634 		spin_lock_bh(&wl->lock);
635 		brcms_c_get_current_rateset(wl->wlc, &rs);
636 		spin_unlock_bh(&wl->lock);
637 
638 		br_mask = info->basic_rates;
639 		bi = hw->wiphy->bands[brcms_c_get_curband(wl->wlc)];
640 		for (i = 0; i < bi->n_bitrates; i++) {
641 			/* convert to internal rate value */
642 			rate = (bi->bitrates[i].bitrate << 1) / 10;
643 
644 			/* set/clear basic rate flag */
645 			brcms_set_basic_rate(&rs, rate, br_mask & 1);
646 			br_mask >>= 1;
647 		}
648 
649 		/* update the rate set */
650 		spin_lock_bh(&wl->lock);
651 		error = brcms_c_set_rateset(wl->wlc, &rs);
652 		spin_unlock_bh(&wl->lock);
653 		if (error)
654 			brcms_err(core, "changing basic rates failed: %d\n",
655 				  error);
656 	}
657 	if (changed & BSS_CHANGED_BEACON_INT) {
658 		/* Beacon interval changed */
659 		spin_lock_bh(&wl->lock);
660 		brcms_c_set_beacon_period(wl->wlc, info->beacon_int);
661 		spin_unlock_bh(&wl->lock);
662 	}
663 	if (changed & BSS_CHANGED_BSSID) {
664 		/* BSSID changed, for whatever reason (IBSS and managed mode) */
665 		spin_lock_bh(&wl->lock);
666 		brcms_c_set_addrmatch(wl->wlc, RCM_BSSID_OFFSET, info->bssid);
667 		spin_unlock_bh(&wl->lock);
668 	}
669 	if (changed & BSS_CHANGED_SSID) {
670 		/* BSSID changed, for whatever reason (IBSS and managed mode) */
671 		spin_lock_bh(&wl->lock);
672 		brcms_c_set_ssid(wl->wlc, vif->cfg.ssid, vif->cfg.ssid_len);
673 		spin_unlock_bh(&wl->lock);
674 	}
675 	if (changed & BSS_CHANGED_BEACON) {
676 		/* Beacon data changed, retrieve new beacon (beaconing modes) */
677 		struct sk_buff *beacon;
678 		u16 tim_offset = 0;
679 
680 		spin_lock_bh(&wl->lock);
681 		beacon = ieee80211_beacon_get_tim(hw, vif, &tim_offset, NULL, 0);
682 		brcms_c_set_new_beacon(wl->wlc, beacon, tim_offset,
683 				       info->dtim_period);
684 		spin_unlock_bh(&wl->lock);
685 	}
686 
687 	if (changed & BSS_CHANGED_AP_PROBE_RESP) {
688 		struct sk_buff *probe_resp;
689 
690 		spin_lock_bh(&wl->lock);
691 		probe_resp = ieee80211_proberesp_get(hw, vif);
692 		brcms_c_set_new_probe_resp(wl->wlc, probe_resp);
693 		spin_unlock_bh(&wl->lock);
694 	}
695 
696 	if (changed & BSS_CHANGED_BEACON_ENABLED) {
697 		/* Beaconing should be enabled/disabled (beaconing modes) */
698 		brcms_err(core, "%s: Beacon enabled: %s\n", __func__,
699 			  info->enable_beacon ? "true" : "false");
700 		if (info->enable_beacon &&
701 		    hw->wiphy->flags & WIPHY_FLAG_AP_PROBE_RESP_OFFLOAD) {
702 			brcms_c_enable_probe_resp(wl->wlc, true);
703 		} else {
704 			brcms_c_enable_probe_resp(wl->wlc, false);
705 		}
706 	}
707 
708 	if (changed & BSS_CHANGED_CQM) {
709 		/* Connection quality monitor config changed */
710 		brcms_err(core, "%s: cqm change: threshold %d, hys %d "
711 			  " (implement)\n", __func__, info->cqm_rssi_thold,
712 			  info->cqm_rssi_hyst);
713 	}
714 
715 	if (changed & BSS_CHANGED_IBSS) {
716 		/* IBSS join status changed */
717 		brcms_err(core, "%s: IBSS joined: %s (implement)\n",
718 			  __func__, vif->cfg.ibss_joined ? "true" : "false");
719 	}
720 
721 	if (changed & BSS_CHANGED_ARP_FILTER) {
722 		/* Hardware ARP filter address list or state changed */
723 		brcms_err(core, "%s: arp filtering: %d addresses"
724 			  " (implement)\n", __func__, vif->cfg.arp_addr_cnt);
725 	}
726 
727 	if (changed & BSS_CHANGED_QOS) {
728 		/*
729 		 * QoS for this association was enabled/disabled.
730 		 * Note that it is only ever disabled for station mode.
731 		 */
732 		brcms_err(core, "%s: qos enabled: %s (implement)\n",
733 			  __func__, info->qos ? "true" : "false");
734 	}
735 	return;
736 }
737 
738 static void
739 brcms_ops_configure_filter(struct ieee80211_hw *hw,
740 			unsigned int changed_flags,
741 			unsigned int *total_flags, u64 multicast)
742 {
743 	struct brcms_info *wl = hw->priv;
744 	struct bcma_device *core = wl->wlc->hw->d11core;
745 
746 	changed_flags &= MAC_FILTERS;
747 	*total_flags &= MAC_FILTERS;
748 
749 	if (changed_flags & FIF_ALLMULTI)
750 		brcms_dbg_info(core, "FIF_ALLMULTI\n");
751 	if (changed_flags & FIF_FCSFAIL)
752 		brcms_dbg_info(core, "FIF_FCSFAIL\n");
753 	if (changed_flags & FIF_CONTROL)
754 		brcms_dbg_info(core, "FIF_CONTROL\n");
755 	if (changed_flags & FIF_OTHER_BSS)
756 		brcms_dbg_info(core, "FIF_OTHER_BSS\n");
757 	if (changed_flags & FIF_PSPOLL)
758 		brcms_dbg_info(core, "FIF_PSPOLL\n");
759 	if (changed_flags & FIF_BCN_PRBRESP_PROMISC)
760 		brcms_dbg_info(core, "FIF_BCN_PRBRESP_PROMISC\n");
761 
762 	spin_lock_bh(&wl->lock);
763 	brcms_c_mac_promisc(wl->wlc, *total_flags);
764 	spin_unlock_bh(&wl->lock);
765 	return;
766 }
767 
768 static void brcms_ops_sw_scan_start(struct ieee80211_hw *hw,
769 				    struct ieee80211_vif *vif,
770 				    const u8 *mac_addr)
771 {
772 	struct brcms_info *wl = hw->priv;
773 	spin_lock_bh(&wl->lock);
774 	brcms_c_scan_start(wl->wlc);
775 	spin_unlock_bh(&wl->lock);
776 	return;
777 }
778 
779 static void brcms_ops_sw_scan_complete(struct ieee80211_hw *hw,
780 				       struct ieee80211_vif *vif)
781 {
782 	struct brcms_info *wl = hw->priv;
783 	spin_lock_bh(&wl->lock);
784 	brcms_c_scan_stop(wl->wlc);
785 	spin_unlock_bh(&wl->lock);
786 	return;
787 }
788 
789 static int
790 brcms_ops_conf_tx(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
791 		  unsigned int link_id, u16 queue,
792 		  const struct ieee80211_tx_queue_params *params)
793 {
794 	struct brcms_info *wl = hw->priv;
795 
796 	spin_lock_bh(&wl->lock);
797 	brcms_c_wme_setparams(wl->wlc, queue, params, true);
798 	spin_unlock_bh(&wl->lock);
799 
800 	return 0;
801 }
802 
803 static int
804 brcms_ops_sta_add(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
805 	       struct ieee80211_sta *sta)
806 {
807 	struct brcms_info *wl = hw->priv;
808 	struct scb *scb = &wl->wlc->pri_scb;
809 
810 	brcms_c_init_scb(scb);
811 
812 	wl->pub->global_ampdu = &(scb->scb_ampdu);
813 	wl->pub->global_ampdu->max_pdu = 16;
814 
815 	/*
816 	 * minstrel_ht initiates addBA on our behalf by calling
817 	 * ieee80211_start_tx_ba_session()
818 	 */
819 	return 0;
820 }
821 
822 static int
823 brcms_ops_ampdu_action(struct ieee80211_hw *hw,
824 		    struct ieee80211_vif *vif,
825 		    struct ieee80211_ampdu_params *params)
826 {
827 	struct brcms_info *wl = hw->priv;
828 	struct scb *scb = &wl->wlc->pri_scb;
829 	int status;
830 	struct ieee80211_sta *sta = params->sta;
831 	enum ieee80211_ampdu_mlme_action action = params->action;
832 	u16 tid = params->tid;
833 
834 	if (WARN_ON(scb->magic != SCB_MAGIC))
835 		return -EIDRM;
836 	switch (action) {
837 	case IEEE80211_AMPDU_RX_START:
838 		break;
839 	case IEEE80211_AMPDU_RX_STOP:
840 		break;
841 	case IEEE80211_AMPDU_TX_START:
842 		spin_lock_bh(&wl->lock);
843 		status = brcms_c_aggregatable(wl->wlc, tid);
844 		spin_unlock_bh(&wl->lock);
845 		if (!status) {
846 			brcms_dbg_ht(wl->wlc->hw->d11core,
847 				     "START: tid %d is not agg\'able\n", tid);
848 			return -EINVAL;
849 		}
850 		return IEEE80211_AMPDU_TX_START_IMMEDIATE;
851 
852 	case IEEE80211_AMPDU_TX_STOP_CONT:
853 	case IEEE80211_AMPDU_TX_STOP_FLUSH:
854 	case IEEE80211_AMPDU_TX_STOP_FLUSH_CONT:
855 		spin_lock_bh(&wl->lock);
856 		brcms_c_ampdu_flush(wl->wlc, sta, tid);
857 		spin_unlock_bh(&wl->lock);
858 		ieee80211_stop_tx_ba_cb_irqsafe(vif, sta->addr, tid);
859 		break;
860 	case IEEE80211_AMPDU_TX_OPERATIONAL:
861 		/*
862 		 * BA window size from ADDBA response ('buf_size') defines how
863 		 * many outstanding MPDUs are allowed for the BA stream by
864 		 * recipient and traffic class (this is actually unused by the
865 		 * rest of the driver). 'ampdu_factor' gives maximum AMPDU size.
866 		 */
867 		spin_lock_bh(&wl->lock);
868 		brcms_c_ampdu_tx_operational(wl->wlc, tid,
869 			(1 << (IEEE80211_HT_MAX_AMPDU_FACTOR +
870 			 sta->deflink.ht_cap.ampdu_factor)) - 1);
871 		spin_unlock_bh(&wl->lock);
872 		/* Power save wakeup */
873 		break;
874 	default:
875 		brcms_err(wl->wlc->hw->d11core,
876 			  "%s: Invalid command, ignoring\n", __func__);
877 	}
878 
879 	return 0;
880 }
881 
882 static void brcms_ops_rfkill_poll(struct ieee80211_hw *hw)
883 {
884 	struct brcms_info *wl = hw->priv;
885 	bool blocked;
886 
887 	spin_lock_bh(&wl->lock);
888 	blocked = brcms_c_check_radio_disabled(wl->wlc);
889 	spin_unlock_bh(&wl->lock);
890 
891 	wiphy_rfkill_set_hw_state(wl->pub->ieee_hw->wiphy, blocked);
892 }
893 
894 static bool brcms_tx_flush_completed(struct brcms_info *wl)
895 {
896 	bool result;
897 
898 	spin_lock_bh(&wl->lock);
899 	result = brcms_c_tx_flush_completed(wl->wlc);
900 	spin_unlock_bh(&wl->lock);
901 	return result;
902 }
903 
904 static void brcms_ops_flush(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
905 			    u32 queues, bool drop)
906 {
907 	struct brcms_info *wl = hw->priv;
908 	int ret;
909 
910 	no_printk("%s: drop = %s\n", __func__, drop ? "true" : "false");
911 
912 	ret = wait_event_timeout(wl->tx_flush_wq,
913 				 brcms_tx_flush_completed(wl),
914 				 msecs_to_jiffies(BRCMS_FLUSH_TIMEOUT));
915 
916 	brcms_dbg_mac80211(wl->wlc->hw->d11core,
917 			   "ret=%d\n", jiffies_to_msecs(ret));
918 }
919 
920 static u64 brcms_ops_get_tsf(struct ieee80211_hw *hw, struct ieee80211_vif *vif)
921 {
922 	struct brcms_info *wl = hw->priv;
923 	u64 tsf;
924 
925 	spin_lock_bh(&wl->lock);
926 	tsf = brcms_c_tsf_get(wl->wlc);
927 	spin_unlock_bh(&wl->lock);
928 
929 	return tsf;
930 }
931 
932 static void brcms_ops_set_tsf(struct ieee80211_hw *hw,
933 			   struct ieee80211_vif *vif, u64 tsf)
934 {
935 	struct brcms_info *wl = hw->priv;
936 
937 	spin_lock_bh(&wl->lock);
938 	brcms_c_tsf_set(wl->wlc, tsf);
939 	spin_unlock_bh(&wl->lock);
940 }
941 
942 static int brcms_ops_beacon_set_tim(struct ieee80211_hw *hw,
943 				 struct ieee80211_sta *sta, bool set)
944 {
945 	struct brcms_info *wl = hw->priv;
946 	struct sk_buff *beacon = NULL;
947 	u16 tim_offset = 0;
948 
949 	spin_lock_bh(&wl->lock);
950 	if (wl->wlc->vif)
951 		beacon = ieee80211_beacon_get_tim(hw, wl->wlc->vif,
952 						  &tim_offset, NULL, 0);
953 	if (beacon)
954 		brcms_c_set_new_beacon(wl->wlc, beacon, tim_offset,
955 				       wl->wlc->vif->bss_conf.dtim_period);
956 	spin_unlock_bh(&wl->lock);
957 
958 	return 0;
959 }
960 
961 static const struct ieee80211_ops brcms_ops = {
962 	.add_chanctx = ieee80211_emulate_add_chanctx,
963 	.remove_chanctx = ieee80211_emulate_remove_chanctx,
964 	.change_chanctx = ieee80211_emulate_change_chanctx,
965 	.switch_vif_chanctx = ieee80211_emulate_switch_vif_chanctx,
966 	.tx = brcms_ops_tx,
967 	.wake_tx_queue = ieee80211_handle_wake_tx_queue,
968 	.start = brcms_ops_start,
969 	.stop = brcms_ops_stop,
970 	.add_interface = brcms_ops_add_interface,
971 	.remove_interface = brcms_ops_remove_interface,
972 	.config = brcms_ops_config,
973 	.bss_info_changed = brcms_ops_bss_info_changed,
974 	.configure_filter = brcms_ops_configure_filter,
975 	.sw_scan_start = brcms_ops_sw_scan_start,
976 	.sw_scan_complete = brcms_ops_sw_scan_complete,
977 	.conf_tx = brcms_ops_conf_tx,
978 	.sta_add = brcms_ops_sta_add,
979 	.ampdu_action = brcms_ops_ampdu_action,
980 	.rfkill_poll = brcms_ops_rfkill_poll,
981 	.flush = brcms_ops_flush,
982 	.get_tsf = brcms_ops_get_tsf,
983 	.set_tsf = brcms_ops_set_tsf,
984 	.set_tim = brcms_ops_beacon_set_tim,
985 };
986 
987 void brcms_dpc(struct tasklet_struct *t)
988 {
989 	struct brcms_info *wl;
990 
991 	wl = from_tasklet(wl, t, tasklet);
992 
993 	spin_lock_bh(&wl->lock);
994 
995 	/* call the common second level interrupt handler */
996 	if (wl->pub->up) {
997 		if (wl->resched) {
998 			unsigned long flags;
999 
1000 			spin_lock_irqsave(&wl->isr_lock, flags);
1001 			brcms_c_intrsupd(wl->wlc);
1002 			spin_unlock_irqrestore(&wl->isr_lock, flags);
1003 		}
1004 
1005 		wl->resched = brcms_c_dpc(wl->wlc, true);
1006 	}
1007 
1008 	/* brcms_c_dpc() may bring the driver down */
1009 	if (!wl->pub->up)
1010 		goto done;
1011 
1012 	/* re-schedule dpc */
1013 	if (wl->resched)
1014 		tasklet_schedule(&wl->tasklet);
1015 	else
1016 		/* re-enable interrupts */
1017 		brcms_intrson(wl);
1018 
1019  done:
1020 	spin_unlock_bh(&wl->lock);
1021 	wake_up(&wl->tx_flush_wq);
1022 }
1023 
1024 static irqreturn_t brcms_isr(int irq, void *dev_id)
1025 {
1026 	struct brcms_info *wl;
1027 	irqreturn_t ret = IRQ_NONE;
1028 
1029 	wl = (struct brcms_info *) dev_id;
1030 
1031 	spin_lock(&wl->isr_lock);
1032 
1033 	/* call common first level interrupt handler */
1034 	if (brcms_c_isr(wl->wlc)) {
1035 		/* schedule second level handler */
1036 		tasklet_schedule(&wl->tasklet);
1037 		ret = IRQ_HANDLED;
1038 	}
1039 
1040 	spin_unlock(&wl->isr_lock);
1041 
1042 	return ret;
1043 }
1044 
1045 /*
1046  * is called in brcms_pci_probe() context, therefore no locking required.
1047  */
1048 static int ieee_hw_rate_init(struct ieee80211_hw *hw)
1049 {
1050 	struct brcms_info *wl = hw->priv;
1051 	struct brcms_c_info *wlc = wl->wlc;
1052 	struct ieee80211_supported_band *band;
1053 	u16 phy_type;
1054 
1055 	hw->wiphy->bands[NL80211_BAND_2GHZ] = NULL;
1056 	hw->wiphy->bands[NL80211_BAND_5GHZ] = NULL;
1057 
1058 	phy_type = brcms_c_get_phy_type(wl->wlc, 0);
1059 	if (phy_type == PHY_TYPE_N || phy_type == PHY_TYPE_LCN) {
1060 		band = &wlc->bandstate[BAND_2G_INDEX]->band;
1061 		*band = brcms_band_2GHz_nphy_template;
1062 		if (phy_type == PHY_TYPE_LCN) {
1063 			/* Single stream */
1064 			band->ht_cap.mcs.rx_mask[1] = 0;
1065 			band->ht_cap.mcs.rx_highest = cpu_to_le16(72);
1066 		}
1067 		hw->wiphy->bands[NL80211_BAND_2GHZ] = band;
1068 	} else {
1069 		return -EPERM;
1070 	}
1071 
1072 	/* Assume all bands use the same phy.  True for 11n devices. */
1073 	if (wl->pub->_nbands > 1) {
1074 		if (phy_type == PHY_TYPE_N || phy_type == PHY_TYPE_LCN) {
1075 			band = &wlc->bandstate[BAND_5G_INDEX]->band;
1076 			*band = brcms_band_5GHz_nphy_template;
1077 			hw->wiphy->bands[NL80211_BAND_5GHZ] = band;
1078 		} else {
1079 			return -EPERM;
1080 		}
1081 	}
1082 	return 0;
1083 }
1084 
1085 /*
1086  * is called in brcms_pci_probe() context, therefore no locking required.
1087  */
1088 static int ieee_hw_init(struct ieee80211_hw *hw)
1089 {
1090 	ieee80211_hw_set(hw, AMPDU_AGGREGATION);
1091 	ieee80211_hw_set(hw, SIGNAL_DBM);
1092 	ieee80211_hw_set(hw, REPORTS_TX_ACK_STATUS);
1093 
1094 	hw->extra_tx_headroom = brcms_c_get_header_len();
1095 	hw->queues = N_TX_QUEUES;
1096 	hw->max_rates = 2;	/* Primary rate and 1 fallback rate */
1097 
1098 	/* channel change time is dependent on chip and band  */
1099 	hw->wiphy->interface_modes = BIT(NL80211_IFTYPE_STATION) |
1100 				     BIT(NL80211_IFTYPE_AP) |
1101 				     BIT(NL80211_IFTYPE_ADHOC);
1102 
1103 	/*
1104 	 * deactivate sending probe responses by ucude, because this will
1105 	 * cause problems when WPS is used.
1106 	 *
1107 	 * hw->wiphy->flags |= WIPHY_FLAG_AP_PROBE_RESP_OFFLOAD;
1108 	 */
1109 
1110 	wiphy_ext_feature_set(hw->wiphy, NL80211_EXT_FEATURE_CQM_RSSI_LIST);
1111 
1112 	hw->rate_control_algorithm = "minstrel_ht";
1113 
1114 	hw->sta_data_size = 0;
1115 	return ieee_hw_rate_init(hw);
1116 }
1117 
1118 /*
1119  * attach to the WL device.
1120  *
1121  * Attach to the WL device identified by vendor and device parameters.
1122  * regs is a host accessible memory address pointing to WL device registers.
1123  *
1124  * is called in brcms_bcma_probe() context, therefore no locking required.
1125  */
1126 static struct brcms_info *brcms_attach(struct bcma_device *pdev)
1127 {
1128 	struct brcms_info *wl = NULL;
1129 	int unit, err;
1130 	struct ieee80211_hw *hw;
1131 	u8 perm[ETH_ALEN];
1132 
1133 	unit = n_adapters_found;
1134 	err = 0;
1135 
1136 	if (unit < 0)
1137 		return NULL;
1138 
1139 	/* allocate private info */
1140 	hw = bcma_get_drvdata(pdev);
1141 	if (hw != NULL)
1142 		wl = hw->priv;
1143 	if (WARN_ON(hw == NULL) || WARN_ON(wl == NULL))
1144 		return NULL;
1145 	wl->wiphy = hw->wiphy;
1146 
1147 	atomic_set(&wl->callbacks, 0);
1148 
1149 	init_waitqueue_head(&wl->tx_flush_wq);
1150 
1151 	/* setup the bottom half handler */
1152 	tasklet_setup(&wl->tasklet, brcms_dpc);
1153 
1154 	spin_lock_init(&wl->lock);
1155 	spin_lock_init(&wl->isr_lock);
1156 
1157 	/* common load-time initialization */
1158 	wl->wlc = brcms_c_attach((void *)wl, pdev, unit, false, &err);
1159 	if (!wl->wlc) {
1160 		wiphy_err(wl->wiphy, "%s: attach() failed with code %d\n",
1161 			  KBUILD_MODNAME, err);
1162 		goto fail;
1163 	}
1164 	wl->pub = brcms_c_pub(wl->wlc);
1165 
1166 	wl->pub->ieee_hw = hw;
1167 
1168 	/* register our interrupt handler */
1169 	if (request_irq(pdev->irq, brcms_isr,
1170 			IRQF_SHARED, KBUILD_MODNAME, wl)) {
1171 		wiphy_err(wl->wiphy, "wl%d: request_irq() failed\n", unit);
1172 		goto fail;
1173 	}
1174 	wl->irq = pdev->irq;
1175 
1176 	/* register module */
1177 	brcms_c_module_register(wl->pub, "linux", wl, NULL);
1178 
1179 	if (ieee_hw_init(hw)) {
1180 		wiphy_err(wl->wiphy, "wl%d: %s: ieee_hw_init failed!\n", unit,
1181 			  __func__);
1182 		goto fail;
1183 	}
1184 
1185 	brcms_c_regd_init(wl->wlc);
1186 
1187 	memcpy(perm, &wl->pub->cur_etheraddr, ETH_ALEN);
1188 	if (WARN_ON(!is_valid_ether_addr(perm)))
1189 		goto fail;
1190 	SET_IEEE80211_PERM_ADDR(hw, perm);
1191 
1192 	err = ieee80211_register_hw(hw);
1193 	if (err)
1194 		wiphy_err(wl->wiphy, "%s: ieee80211_register_hw failed, status"
1195 			  "%d\n", __func__, err);
1196 
1197 	if (wl->pub->srom_ccode[0] &&
1198 	    regulatory_hint(wl->wiphy, wl->pub->srom_ccode))
1199 		wiphy_err(wl->wiphy, "%s: regulatory hint failed\n", __func__);
1200 
1201 	brcms_debugfs_attach(wl->pub);
1202 	brcms_debugfs_create_files(wl->pub);
1203 	n_adapters_found++;
1204 	return wl;
1205 
1206 fail:
1207 	brcms_free(wl);
1208 	return NULL;
1209 }
1210 
1211 
1212 
1213 /*
1214  * determines if a device is a WL device, and if so, attaches it.
1215  *
1216  * This function determines if a device pointed to by pdev is a WL device,
1217  * and if so, performs a brcms_attach() on it.
1218  *
1219  * Perimeter lock is initialized in the course of this function.
1220  */
1221 static int brcms_bcma_probe(struct bcma_device *pdev)
1222 {
1223 	struct brcms_info *wl;
1224 	struct ieee80211_hw *hw;
1225 	int ret;
1226 
1227 	dev_info(&pdev->dev, "mfg %x core %x rev %d class %d irq %d\n",
1228 		 pdev->id.manuf, pdev->id.id, pdev->id.rev, pdev->id.class,
1229 		 pdev->irq);
1230 
1231 	if ((pdev->id.manuf != BCMA_MANUF_BCM) ||
1232 	    (pdev->id.id != BCMA_CORE_80211))
1233 		return -ENODEV;
1234 
1235 	hw = ieee80211_alloc_hw(sizeof(struct brcms_info), &brcms_ops);
1236 	if (!hw) {
1237 		pr_err("%s: ieee80211_alloc_hw failed\n", __func__);
1238 		return -ENOMEM;
1239 	}
1240 
1241 	SET_IEEE80211_DEV(hw, &pdev->dev);
1242 
1243 	bcma_set_drvdata(pdev, hw);
1244 
1245 	memset(hw->priv, 0, sizeof(*wl));
1246 
1247 	wl = brcms_attach(pdev);
1248 	if (!wl) {
1249 		pr_err("%s: brcms_attach failed!\n", __func__);
1250 		ret = -ENODEV;
1251 		goto err_free_ieee80211;
1252 	}
1253 	brcms_led_register(wl);
1254 
1255 	return 0;
1256 
1257 err_free_ieee80211:
1258 	ieee80211_free_hw(hw);
1259 	return ret;
1260 }
1261 
1262 static int brcms_suspend(struct bcma_device *pdev)
1263 {
1264 	struct brcms_info *wl;
1265 	struct ieee80211_hw *hw;
1266 
1267 	hw = bcma_get_drvdata(pdev);
1268 	wl = hw->priv;
1269 	if (!wl) {
1270 		pr_err("%s: %s: no driver private struct!\n", KBUILD_MODNAME,
1271 		       __func__);
1272 		return -ENODEV;
1273 	}
1274 
1275 	/* only need to flag hw is down for proper resume */
1276 	spin_lock_bh(&wl->lock);
1277 	wl->pub->hw_up = false;
1278 	spin_unlock_bh(&wl->lock);
1279 
1280 	brcms_dbg_info(wl->wlc->hw->d11core, "brcms_suspend ok\n");
1281 
1282 	return 0;
1283 }
1284 
1285 static int brcms_resume(struct bcma_device *pdev)
1286 {
1287 	return 0;
1288 }
1289 
1290 static struct bcma_driver brcms_bcma_driver = {
1291 	.name     = KBUILD_MODNAME,
1292 	.probe    = brcms_bcma_probe,
1293 	.suspend  = brcms_suspend,
1294 	.resume   = brcms_resume,
1295 	.remove   = brcms_remove,
1296 	.id_table = brcms_coreid_table,
1297 };
1298 
1299 /*
1300  * This is the main entry point for the brcmsmac driver.
1301  *
1302  * This function is scheduled upon module initialization and
1303  * does the driver registration, which result in brcms_bcma_probe()
1304  * call resulting in the driver bringup.
1305  */
1306 static void brcms_driver_init(struct work_struct *work)
1307 {
1308 	int error;
1309 
1310 	error = bcma_driver_register(&brcms_bcma_driver);
1311 	if (error)
1312 		pr_err("%s: register returned %d\n", __func__, error);
1313 }
1314 
1315 static DECLARE_WORK(brcms_driver_work, brcms_driver_init);
1316 
1317 static int __init brcms_module_init(void)
1318 {
1319 	brcms_debugfs_init();
1320 	if (!schedule_work(&brcms_driver_work))
1321 		return -EBUSY;
1322 
1323 	return 0;
1324 }
1325 
1326 /*
1327  * This function unloads the brcmsmac driver from the system.
1328  *
1329  * This function unconditionally unloads the brcmsmac driver module from the
1330  * system.
1331  *
1332  */
1333 static void __exit brcms_module_exit(void)
1334 {
1335 	cancel_work_sync(&brcms_driver_work);
1336 	bcma_driver_unregister(&brcms_bcma_driver);
1337 	brcms_debugfs_exit();
1338 }
1339 
1340 module_init(brcms_module_init);
1341 module_exit(brcms_module_exit);
1342 
1343 /*
1344  * precondition: perimeter lock has been acquired
1345  */
1346 void brcms_txflowcontrol(struct brcms_info *wl, struct brcms_if *wlif,
1347 			 bool state, int prio)
1348 {
1349 	brcms_err(wl->wlc->hw->d11core, "Shouldn't be here %s\n", __func__);
1350 }
1351 
1352 /*
1353  * precondition: perimeter lock has been acquired
1354  */
1355 void brcms_init(struct brcms_info *wl)
1356 {
1357 	brcms_dbg_info(wl->wlc->hw->d11core, "Initializing wl%d\n",
1358 		       wl->pub->unit);
1359 	brcms_reset(wl);
1360 	brcms_c_init(wl->wlc, wl->mute_tx);
1361 }
1362 
1363 /*
1364  * precondition: perimeter lock has been acquired
1365  */
1366 uint brcms_reset(struct brcms_info *wl)
1367 {
1368 	brcms_dbg_info(wl->wlc->hw->d11core, "Resetting wl%d\n", wl->pub->unit);
1369 	brcms_c_reset(wl->wlc);
1370 
1371 	/* dpc will not be rescheduled */
1372 	wl->resched = false;
1373 
1374 	/* inform publicly that interface is down */
1375 	wl->pub->up = false;
1376 
1377 	return 0;
1378 }
1379 
1380 void brcms_fatal_error(struct brcms_info *wl)
1381 {
1382 	brcms_err(wl->wlc->hw->d11core, "wl%d: fatal error, reinitializing\n",
1383 		  wl->wlc->pub->unit);
1384 	brcms_reset(wl);
1385 	ieee80211_restart_hw(wl->pub->ieee_hw);
1386 }
1387 
1388 /*
1389  * These are interrupt on/off entry points. Disable interrupts
1390  * during interrupt state transition.
1391  */
1392 void brcms_intrson(struct brcms_info *wl)
1393 {
1394 	unsigned long flags;
1395 
1396 	spin_lock_irqsave(&wl->isr_lock, flags);
1397 	brcms_c_intrson(wl->wlc);
1398 	spin_unlock_irqrestore(&wl->isr_lock, flags);
1399 }
1400 
1401 u32 brcms_intrsoff(struct brcms_info *wl)
1402 {
1403 	unsigned long flags;
1404 	u32 status;
1405 
1406 	spin_lock_irqsave(&wl->isr_lock, flags);
1407 	status = brcms_c_intrsoff(wl->wlc);
1408 	spin_unlock_irqrestore(&wl->isr_lock, flags);
1409 	return status;
1410 }
1411 
1412 void brcms_intrsrestore(struct brcms_info *wl, u32 macintmask)
1413 {
1414 	unsigned long flags;
1415 
1416 	spin_lock_irqsave(&wl->isr_lock, flags);
1417 	brcms_c_intrsrestore(wl->wlc, macintmask);
1418 	spin_unlock_irqrestore(&wl->isr_lock, flags);
1419 }
1420 
1421 /*
1422  * precondition: perimeter lock has been acquired
1423  */
1424 int brcms_up(struct brcms_info *wl)
1425 {
1426 	int error = 0;
1427 
1428 	if (wl->pub->up)
1429 		return 0;
1430 
1431 	error = brcms_c_up(wl->wlc);
1432 
1433 	return error;
1434 }
1435 
1436 /*
1437  * precondition: perimeter lock has been acquired
1438  */
1439 void brcms_down(struct brcms_info *wl)
1440 	__must_hold(&wl->lock)
1441 {
1442 	uint callbacks, ret_val = 0;
1443 
1444 	/* call common down function */
1445 	ret_val = brcms_c_down(wl->wlc);
1446 	callbacks = atomic_read(&wl->callbacks) - ret_val;
1447 
1448 	/* wait for down callbacks to complete */
1449 	spin_unlock_bh(&wl->lock);
1450 
1451 	/* For HIGH_only driver, it's important to actually schedule other work,
1452 	 * not just spin wait since everything runs at schedule level
1453 	 */
1454 	SPINWAIT((atomic_read(&wl->callbacks) > callbacks), 100 * 1000);
1455 
1456 	spin_lock_bh(&wl->lock);
1457 }
1458 
1459 /*
1460 * precondition: perimeter lock is not acquired
1461  */
1462 static void _brcms_timer(struct work_struct *work)
1463 {
1464 	struct brcms_timer *t = container_of(work, struct brcms_timer,
1465 					     dly_wrk.work);
1466 
1467 	spin_lock_bh(&t->wl->lock);
1468 
1469 	if (t->set) {
1470 		if (t->periodic) {
1471 			atomic_inc(&t->wl->callbacks);
1472 			ieee80211_queue_delayed_work(t->wl->pub->ieee_hw,
1473 						     &t->dly_wrk,
1474 						     msecs_to_jiffies(t->ms));
1475 		} else {
1476 			t->set = false;
1477 		}
1478 
1479 		t->fn(t->arg);
1480 	}
1481 
1482 	atomic_dec(&t->wl->callbacks);
1483 
1484 	spin_unlock_bh(&t->wl->lock);
1485 }
1486 
1487 /*
1488  * Adds a timer to the list. Caller supplies a timer function.
1489  * Is called from wlc.
1490  *
1491  * precondition: perimeter lock has been acquired
1492  */
1493 struct brcms_timer *brcms_init_timer(struct brcms_info *wl,
1494 				     void (*fn) (void *arg),
1495 				     void *arg, const char *name)
1496 {
1497 	struct brcms_timer *t;
1498 
1499 	t = kzalloc(sizeof(struct brcms_timer), GFP_ATOMIC);
1500 	if (!t)
1501 		return NULL;
1502 
1503 	INIT_DELAYED_WORK(&t->dly_wrk, _brcms_timer);
1504 	t->wl = wl;
1505 	t->fn = fn;
1506 	t->arg = arg;
1507 	t->next = wl->timers;
1508 	wl->timers = t;
1509 
1510 #ifdef DEBUG
1511 	t->name = kstrdup(name, GFP_ATOMIC);
1512 #endif
1513 
1514 	return t;
1515 }
1516 
1517 /*
1518  * adds only the kernel timer since it's going to be more accurate
1519  * as well as it's easier to make it periodic
1520  *
1521  * precondition: perimeter lock has been acquired
1522  */
1523 void brcms_add_timer(struct brcms_timer *t, uint ms, int periodic)
1524 {
1525 	struct ieee80211_hw *hw = t->wl->pub->ieee_hw;
1526 
1527 #ifdef DEBUG
1528 	if (t->set)
1529 		brcms_dbg_info(t->wl->wlc->hw->d11core,
1530 			       "%s: Already set. Name: %s, per %d\n",
1531 			       __func__, t->name, periodic);
1532 #endif
1533 	t->ms = ms;
1534 	t->periodic = (bool) periodic;
1535 	if (!t->set) {
1536 		t->set = true;
1537 		atomic_inc(&t->wl->callbacks);
1538 	}
1539 
1540 	ieee80211_queue_delayed_work(hw, &t->dly_wrk, msecs_to_jiffies(ms));
1541 }
1542 
1543 /*
1544  * return true if timer successfully deleted, false if still pending
1545  *
1546  * precondition: perimeter lock has been acquired
1547  */
1548 bool brcms_del_timer(struct brcms_timer *t)
1549 {
1550 	if (t->set) {
1551 		t->set = false;
1552 		if (!cancel_delayed_work(&t->dly_wrk))
1553 			return false;
1554 
1555 		atomic_dec(&t->wl->callbacks);
1556 	}
1557 
1558 	return true;
1559 }
1560 
1561 /*
1562  * precondition: perimeter lock has been acquired
1563  */
1564 void brcms_free_timer(struct brcms_timer *t)
1565 {
1566 	struct brcms_info *wl = t->wl;
1567 	struct brcms_timer *tmp;
1568 
1569 	/* delete the timer in case it is active */
1570 	brcms_del_timer(t);
1571 
1572 	if (wl->timers == t) {
1573 		wl->timers = wl->timers->next;
1574 #ifdef DEBUG
1575 		kfree(t->name);
1576 #endif
1577 		kfree(t);
1578 		return;
1579 
1580 	}
1581 
1582 	tmp = wl->timers;
1583 	while (tmp) {
1584 		if (tmp->next == t) {
1585 			tmp->next = t->next;
1586 #ifdef DEBUG
1587 			kfree(t->name);
1588 #endif
1589 			kfree(t);
1590 			return;
1591 		}
1592 		tmp = tmp->next;
1593 	}
1594 
1595 }
1596 
1597 /*
1598  * precondition: no locking required
1599  */
1600 int brcms_ucode_init_buf(struct brcms_info *wl, void **pbuf, u32 idx)
1601 {
1602 	int i, entry;
1603 	const u8 *pdata;
1604 	struct firmware_hdr *hdr;
1605 	for (i = 0; i < wl->fw.fw_cnt; i++) {
1606 		hdr = (struct firmware_hdr *)wl->fw.fw_hdr[i]->data;
1607 		for (entry = 0; entry < wl->fw.hdr_num_entries[i];
1608 		     entry++, hdr++) {
1609 			u32 len = le32_to_cpu(hdr->len);
1610 			if (le32_to_cpu(hdr->idx) == idx) {
1611 				pdata = wl->fw.fw_bin[i]->data +
1612 					le32_to_cpu(hdr->offset);
1613 				*pbuf = kvmalloc(len, GFP_KERNEL);
1614 				if (*pbuf == NULL)
1615 					goto fail;
1616 				memcpy(*pbuf, pdata, len);
1617 				return 0;
1618 			}
1619 		}
1620 	}
1621 	brcms_err(wl->wlc->hw->d11core,
1622 		  "ERROR: ucode buf tag:%d can not be found!\n", idx);
1623 	*pbuf = NULL;
1624 fail:
1625 	return -ENODATA;
1626 }
1627 
1628 /*
1629  * Precondition: Since this function is called in brcms_bcma_probe() context,
1630  * no locking is required.
1631  */
1632 int brcms_ucode_init_uint(struct brcms_info *wl, size_t *n_bytes, u32 idx)
1633 {
1634 	int i, entry;
1635 	const u8 *pdata;
1636 	struct firmware_hdr *hdr;
1637 	for (i = 0; i < wl->fw.fw_cnt; i++) {
1638 		hdr = (struct firmware_hdr *)wl->fw.fw_hdr[i]->data;
1639 		for (entry = 0; entry < wl->fw.hdr_num_entries[i];
1640 		     entry++, hdr++) {
1641 			if (le32_to_cpu(hdr->idx) == idx) {
1642 				pdata = wl->fw.fw_bin[i]->data +
1643 					le32_to_cpu(hdr->offset);
1644 				if (le32_to_cpu(hdr->len) != 4) {
1645 					brcms_err(wl->wlc->hw->d11core,
1646 						  "ERROR: fw hdr len\n");
1647 					return -ENOMSG;
1648 				}
1649 				*n_bytes = le32_to_cpu(*((__le32 *) pdata));
1650 				return 0;
1651 			}
1652 		}
1653 	}
1654 	brcms_err(wl->wlc->hw->d11core,
1655 		  "ERROR: ucode tag:%d can not be found!\n", idx);
1656 	return -ENOMSG;
1657 }
1658 
1659 /*
1660  * precondition: can both be called locked and unlocked
1661  */
1662 void brcms_ucode_free_buf(void *p)
1663 {
1664 	kvfree(p);
1665 }
1666 
1667 /*
1668  * checks validity of all firmware images loaded from user space
1669  *
1670  * Precondition: Since this function is called in brcms_bcma_probe() context,
1671  * no locking is required.
1672  */
1673 int brcms_check_firmwares(struct brcms_info *wl)
1674 {
1675 	int i;
1676 	int entry;
1677 	int rc = 0;
1678 	const struct firmware *fw;
1679 	const struct firmware *fw_hdr;
1680 	struct firmware_hdr *ucode_hdr;
1681 	for (i = 0; i < MAX_FW_IMAGES && rc == 0; i++) {
1682 		fw =  wl->fw.fw_bin[i];
1683 		fw_hdr = wl->fw.fw_hdr[i];
1684 		if (fw == NULL && fw_hdr == NULL) {
1685 			break;
1686 		} else if (fw == NULL || fw_hdr == NULL) {
1687 			wiphy_err(wl->wiphy, "%s: invalid bin/hdr fw\n",
1688 				  __func__);
1689 			rc = -EBADF;
1690 		} else if (fw_hdr->size % sizeof(struct firmware_hdr)) {
1691 			wiphy_err(wl->wiphy, "%s: non integral fw hdr file "
1692 				"size %zu/%zu\n", __func__, fw_hdr->size,
1693 				sizeof(struct firmware_hdr));
1694 			rc = -EBADF;
1695 		} else if (fw->size < MIN_FW_SIZE || fw->size > MAX_FW_SIZE) {
1696 			wiphy_err(wl->wiphy, "%s: out of bounds fw file size %zu\n",
1697 				  __func__, fw->size);
1698 			rc = -EBADF;
1699 		} else {
1700 			/* check if ucode section overruns firmware image */
1701 			ucode_hdr = (struct firmware_hdr *)fw_hdr->data;
1702 			for (entry = 0; entry < wl->fw.hdr_num_entries[i] &&
1703 			     !rc; entry++, ucode_hdr++) {
1704 				if (le32_to_cpu(ucode_hdr->offset) +
1705 				    le32_to_cpu(ucode_hdr->len) >
1706 				    fw->size) {
1707 					wiphy_err(wl->wiphy,
1708 						  "%s: conflicting bin/hdr\n",
1709 						  __func__);
1710 					rc = -EBADF;
1711 				}
1712 			}
1713 		}
1714 	}
1715 	if (rc == 0 && wl->fw.fw_cnt != i) {
1716 		wiphy_err(wl->wiphy, "%s: invalid fw_cnt=%d\n", __func__,
1717 			wl->fw.fw_cnt);
1718 		rc = -EBADF;
1719 	}
1720 	return rc;
1721 }
1722 
1723 /*
1724  * precondition: perimeter lock has been acquired
1725  */
1726 bool brcms_rfkill_set_hw_state(struct brcms_info *wl)
1727 	__must_hold(&wl->lock)
1728 {
1729 	bool blocked = brcms_c_check_radio_disabled(wl->wlc);
1730 
1731 	spin_unlock_bh(&wl->lock);
1732 	wiphy_rfkill_set_hw_state(wl->pub->ieee_hw->wiphy, blocked);
1733 	if (blocked)
1734 		wiphy_rfkill_start_polling(wl->pub->ieee_hw->wiphy);
1735 	spin_lock_bh(&wl->lock);
1736 	return blocked;
1737 }
1738