1 /* SPDX-License-Identifier: GPL-2.0 */ 2 #ifndef LINUX_B43_PHY_COMMON_H_ 3 #define LINUX_B43_PHY_COMMON_H_ 4 5 #include <linux/types.h> 6 #include <linux/nl80211.h> 7 8 struct b43_wldev; 9 10 /* PHY register routing bits */ 11 #define B43_PHYROUTE 0x0C00 /* PHY register routing bits mask */ 12 #define B43_PHYROUTE_BASE 0x0000 /* Base registers */ 13 #define B43_PHYROUTE_OFDM_GPHY 0x0400 /* OFDM register routing for G-PHYs */ 14 #define B43_PHYROUTE_EXT_GPHY 0x0800 /* Extended G-PHY registers */ 15 #define B43_PHYROUTE_N_BMODE 0x0C00 /* N-PHY BMODE registers */ 16 17 /* CCK (B-PHY) registers. */ 18 #define B43_PHY_CCK(reg) ((reg) | B43_PHYROUTE_BASE) 19 /* N-PHY registers. */ 20 #define B43_PHY_N(reg) ((reg) | B43_PHYROUTE_BASE) 21 /* N-PHY BMODE registers. */ 22 #define B43_PHY_N_BMODE(reg) ((reg) | B43_PHYROUTE_N_BMODE) 23 /* OFDM (A-PHY) registers. */ 24 #define B43_PHY_OFDM(reg) ((reg) | B43_PHYROUTE_OFDM_GPHY) 25 /* Extended G-PHY registers. */ 26 #define B43_PHY_EXTG(reg) ((reg) | B43_PHYROUTE_EXT_GPHY) 27 28 29 /* Masks for the PHY versioning registers. */ 30 #define B43_PHYVER_ANALOG 0xF000 31 #define B43_PHYVER_ANALOG_SHIFT 12 32 #define B43_PHYVER_TYPE 0x0F00 33 #define B43_PHYVER_TYPE_SHIFT 8 34 #define B43_PHYVER_VERSION 0x00FF 35 36 /* PHY writes need to be flushed if we reach limit */ 37 #define B43_MAX_WRITES_IN_ROW 24 38 39 /** 40 * enum b43_interference_mitigation - Interference Mitigation mode 41 * 42 * @B43_INTERFMODE_NONE: Disabled 43 * @B43_INTERFMODE_NONWLAN: Non-WLAN Interference Mitigation 44 * @B43_INTERFMODE_MANUALWLAN: WLAN Interference Mitigation 45 * @B43_INTERFMODE_AUTOWLAN: Automatic WLAN Interference Mitigation 46 */ 47 enum b43_interference_mitigation { 48 B43_INTERFMODE_NONE, 49 B43_INTERFMODE_NONWLAN, 50 B43_INTERFMODE_MANUALWLAN, 51 B43_INTERFMODE_AUTOWLAN, 52 }; 53 54 /* Antenna identifiers */ 55 enum { 56 B43_ANTENNA0 = 0, /* Antenna 0 */ 57 B43_ANTENNA1 = 1, /* Antenna 1 */ 58 B43_ANTENNA_AUTO0 = 2, /* Automatic, starting with antenna 0 */ 59 B43_ANTENNA_AUTO1 = 3, /* Automatic, starting with antenna 1 */ 60 B43_ANTENNA2 = 4, 61 B43_ANTENNA3 = 8, 62 63 B43_ANTENNA_AUTO = B43_ANTENNA_AUTO0, 64 B43_ANTENNA_DEFAULT = B43_ANTENNA_AUTO, 65 }; 66 67 /** 68 * enum b43_txpwr_result - Return value for the recalc_txpower PHY op. 69 * 70 * @B43_TXPWR_RES_NEED_ADJUST: Values changed. Hardware adjustment is needed. 71 * @B43_TXPWR_RES_DONE: No more work to do. Everything is done. 72 */ 73 enum b43_txpwr_result { 74 B43_TXPWR_RES_NEED_ADJUST, 75 B43_TXPWR_RES_DONE, 76 }; 77 78 /** 79 * struct b43_phy_operations - Function pointers for PHY ops. 80 * 81 * @allocate: Allocate and initialise the PHY data structures. 82 * Must not be NULL. 83 * @free: Destroy and free the PHY data structures. 84 * Must not be NULL. 85 * 86 * @prepare_structs: Prepare the PHY data structures. 87 * The data structures allocated in @allocate are 88 * initialized here. 89 * Must not be NULL. 90 * @prepare_hardware: Prepare the PHY. This is called before b43_chip_init to 91 * do some early early PHY hardware init. 92 * Can be NULL, if not required. 93 * @init: Initialize the PHY. 94 * Must not be NULL. 95 * @exit: Shutdown the PHY. 96 * Can be NULL, if not required. 97 * 98 * @phy_read: Read from a PHY register. 99 * Must not be NULL. 100 * @phy_write: Write to a PHY register. 101 * Must not be NULL. 102 * @phy_maskset: Maskset a PHY register, taking shortcuts. 103 * If it is NULL, a generic algorithm is used. 104 * @radio_read: Read from a Radio register. 105 * Must not be NULL. 106 * @radio_write: Write to a Radio register. 107 * Must not be NULL. 108 * 109 * @supports_hwpctl: Returns a boolean whether Hardware Power Control 110 * is supported or not. 111 * If NULL, hwpctl is assumed to be never supported. 112 * @software_rfkill: Turn the radio ON or OFF. 113 * Possible state values are 114 * RFKILL_STATE_SOFT_BLOCKED or 115 * RFKILL_STATE_UNBLOCKED 116 * Must not be NULL. 117 * @switch_analog: Turn the Analog on/off. 118 * Must not be NULL. 119 * @switch_channel: Switch the radio to another channel. 120 * Must not be NULL. 121 * @get_default_chan: Just returns the default channel number. 122 * Must not be NULL. 123 * @set_rx_antenna: Set the antenna used for RX. 124 * Can be NULL, if not supported. 125 * @interf_mitigation: Switch the Interference Mitigation mode. 126 * Can be NULL, if not supported. 127 * 128 * @recalc_txpower: Recalculate the transmission power parameters. 129 * This callback has to recalculate the TX power settings, 130 * but does not need to write them to the hardware, yet. 131 * Returns enum b43_txpwr_result to indicate whether the hardware 132 * needs to be adjusted. 133 * If B43_TXPWR_NEED_ADJUST is returned, @adjust_txpower 134 * will be called later. 135 * If the parameter "ignore_tssi" is true, the TSSI values should 136 * be ignored and a recalculation of the power settings should be 137 * done even if the TSSI values did not change. 138 * This function may sleep, but should not. 139 * Must not be NULL. 140 * @adjust_txpower: Write the previously calculated TX power settings 141 * (from @recalc_txpower) to the hardware. 142 * This function may sleep. 143 * Can be NULL, if (and ONLY if) @recalc_txpower _always_ 144 * returns B43_TXPWR_RES_DONE. 145 * 146 * @pwork_15sec: Periodic work. Called every 15 seconds. 147 * Can be NULL, if not required. 148 * @pwork_60sec: Periodic work. Called every 60 seconds. 149 * Can be NULL, if not required. 150 */ 151 struct b43_phy_operations { 152 /* Initialisation */ 153 int (*allocate)(struct b43_wldev *dev); 154 void (*free)(struct b43_wldev *dev); 155 void (*prepare_structs)(struct b43_wldev *dev); 156 int (*prepare_hardware)(struct b43_wldev *dev); 157 int (*init)(struct b43_wldev *dev); 158 void (*exit)(struct b43_wldev *dev); 159 160 /* Register access */ 161 u16 (*phy_read)(struct b43_wldev *dev, u16 reg); 162 void (*phy_write)(struct b43_wldev *dev, u16 reg, u16 value); 163 void (*phy_maskset)(struct b43_wldev *dev, u16 reg, u16 mask, u16 set); 164 u16 (*radio_read)(struct b43_wldev *dev, u16 reg); 165 void (*radio_write)(struct b43_wldev *dev, u16 reg, u16 value); 166 167 /* Radio */ 168 bool (*supports_hwpctl)(struct b43_wldev *dev); 169 void (*software_rfkill)(struct b43_wldev *dev, bool blocked); 170 void (*switch_analog)(struct b43_wldev *dev, bool on); 171 int (*switch_channel)(struct b43_wldev *dev, unsigned int new_channel); 172 unsigned int (*get_default_chan)(struct b43_wldev *dev); 173 void (*set_rx_antenna)(struct b43_wldev *dev, int antenna); 174 int (*interf_mitigation)(struct b43_wldev *dev, 175 enum b43_interference_mitigation new_mode); 176 177 /* Transmission power adjustment */ 178 enum b43_txpwr_result (*recalc_txpower)(struct b43_wldev *dev, 179 bool ignore_tssi); 180 void (*adjust_txpower)(struct b43_wldev *dev); 181 182 /* Misc */ 183 void (*pwork_15sec)(struct b43_wldev *dev); 184 void (*pwork_60sec)(struct b43_wldev *dev); 185 }; 186 187 struct b43_phy_g; 188 struct b43_phy_n; 189 struct b43_phy_lp; 190 struct b43_phy_ht; 191 struct b43_phy_lcn; 192 193 struct b43_phy { 194 /* Hardware operation callbacks. */ 195 const struct b43_phy_operations *ops; 196 197 /* Most hardware context information is stored in the standard- 198 * specific data structures pointed to by the pointers below. 199 * Only one of them is valid (the currently enabled PHY). */ 200 #ifdef CONFIG_B43_DEBUG 201 /* No union for debug build to force NULL derefs in buggy code. */ 202 struct { 203 #else 204 union { 205 #endif 206 /* G-PHY specific information */ 207 struct b43_phy_g *g; 208 /* N-PHY specific information */ 209 struct b43_phy_n *n; 210 /* LP-PHY specific information */ 211 struct b43_phy_lp *lp; 212 /* HT-PHY specific information */ 213 struct b43_phy_ht *ht; 214 /* LCN-PHY specific information */ 215 struct b43_phy_lcn *lcn; 216 /* AC-PHY specific information */ 217 struct b43_phy_ac *ac; 218 }; 219 220 /* Band support flags. */ 221 bool supports_2ghz; 222 bool supports_5ghz; 223 224 /* Is GMODE (2 GHz mode) bit enabled? */ 225 bool gmode; 226 227 /* After power reset full init has to be performed */ 228 bool do_full_init; 229 230 /* Analog Type */ 231 u8 analog; 232 /* B43_PHYTYPE_ */ 233 u8 type; 234 /* PHY revision number. */ 235 u8 rev; 236 237 /* Count writes since last read */ 238 u8 writes_counter; 239 240 /* Radio versioning */ 241 u16 radio_manuf; /* Radio manufacturer */ 242 u16 radio_ver; /* Radio version */ 243 u8 radio_rev; /* Radio revision */ 244 245 /* Software state of the radio */ 246 bool radio_on; 247 248 /* Desired TX power level (in dBm). 249 * This is set by the user and adjusted in b43_phy_xmitpower(). */ 250 int desired_txpower; 251 252 /* Hardware Power Control enabled? */ 253 bool hardware_power_control; 254 255 /* The time (in absolute jiffies) when the next TX power output 256 * check is needed. */ 257 unsigned long next_txpwr_check_time; 258 259 /* Current channel */ 260 struct cfg80211_chan_def *chandef; 261 unsigned int channel; 262 263 /* PHY TX errors counter. */ 264 atomic_t txerr_cnt; 265 266 #ifdef CONFIG_B43_DEBUG 267 /* PHY registers locked (w.r.t. firmware) */ 268 bool phy_locked; 269 /* Radio registers locked (w.r.t. firmware) */ 270 bool radio_locked; 271 #endif /* B43_DEBUG */ 272 }; 273 274 275 /** 276 * b43_phy_allocate - Allocate PHY structs 277 * Allocate the PHY data structures, based on the current dev->phy.type 278 */ 279 int b43_phy_allocate(struct b43_wldev *dev); 280 281 /** 282 * b43_phy_free - Free PHY structs 283 */ 284 void b43_phy_free(struct b43_wldev *dev); 285 286 /** 287 * b43_phy_init - Initialise the PHY 288 */ 289 int b43_phy_init(struct b43_wldev *dev); 290 291 /** 292 * b43_phy_exit - Cleanup PHY 293 */ 294 void b43_phy_exit(struct b43_wldev *dev); 295 296 /** 297 * b43_has_hardware_pctl - Hardware Power Control supported? 298 * Returns a boolean, whether hardware power control is supported. 299 */ 300 bool b43_has_hardware_pctl(struct b43_wldev *dev); 301 302 /** 303 * b43_phy_read - 16bit PHY register read access 304 */ 305 u16 b43_phy_read(struct b43_wldev *dev, u16 reg); 306 307 /** 308 * b43_phy_write - 16bit PHY register write access 309 */ 310 void b43_phy_write(struct b43_wldev *dev, u16 reg, u16 value); 311 312 /** 313 * b43_phy_copy - copy contents of 16bit PHY register to another 314 */ 315 void b43_phy_copy(struct b43_wldev *dev, u16 destreg, u16 srcreg); 316 317 /** 318 * b43_phy_mask - Mask a PHY register with a mask 319 */ 320 void b43_phy_mask(struct b43_wldev *dev, u16 offset, u16 mask); 321 322 /** 323 * b43_phy_set - OR a PHY register with a bitmap 324 */ 325 void b43_phy_set(struct b43_wldev *dev, u16 offset, u16 set); 326 327 /** 328 * b43_phy_maskset - Mask and OR a PHY register with a mask and bitmap 329 */ 330 void b43_phy_maskset(struct b43_wldev *dev, u16 offset, u16 mask, u16 set); 331 332 /** 333 * b43_radio_read - 16bit Radio register read access 334 */ 335 u16 b43_radio_read(struct b43_wldev *dev, u16 reg); 336 #define b43_radio_read16 b43_radio_read /* DEPRECATED */ 337 338 /** 339 * b43_radio_write - 16bit Radio register write access 340 */ 341 void b43_radio_write(struct b43_wldev *dev, u16 reg, u16 value); 342 #define b43_radio_write16 b43_radio_write /* DEPRECATED */ 343 344 /** 345 * b43_radio_mask - Mask a 16bit radio register with a mask 346 */ 347 void b43_radio_mask(struct b43_wldev *dev, u16 offset, u16 mask); 348 349 /** 350 * b43_radio_set - OR a 16bit radio register with a bitmap 351 */ 352 void b43_radio_set(struct b43_wldev *dev, u16 offset, u16 set); 353 354 /** 355 * b43_radio_maskset - Mask and OR a radio register with a mask and bitmap 356 */ 357 void b43_radio_maskset(struct b43_wldev *dev, u16 offset, u16 mask, u16 set); 358 359 /** 360 * b43_radio_wait_value - Waits for a given value in masked register read 361 */ 362 bool b43_radio_wait_value(struct b43_wldev *dev, u16 offset, u16 mask, 363 u16 value, int delay, int timeout); 364 365 /** 366 * b43_radio_lock - Lock firmware radio register access 367 */ 368 void b43_radio_lock(struct b43_wldev *dev); 369 370 /** 371 * b43_radio_unlock - Unlock firmware radio register access 372 */ 373 void b43_radio_unlock(struct b43_wldev *dev); 374 375 /** 376 * b43_phy_lock - Lock firmware PHY register access 377 */ 378 void b43_phy_lock(struct b43_wldev *dev); 379 380 /** 381 * b43_phy_unlock - Unlock firmware PHY register access 382 */ 383 void b43_phy_unlock(struct b43_wldev *dev); 384 385 void b43_phy_put_into_reset(struct b43_wldev *dev); 386 void b43_phy_take_out_of_reset(struct b43_wldev *dev); 387 388 /** 389 * b43_switch_channel - Switch to another channel 390 */ 391 int b43_switch_channel(struct b43_wldev *dev, unsigned int new_channel); 392 393 /** 394 * b43_software_rfkill - Turn the radio ON or OFF in software. 395 */ 396 void b43_software_rfkill(struct b43_wldev *dev, bool blocked); 397 398 /** 399 * b43_phy_txpower_check - Check TX power output. 400 * 401 * Compare the current TX power output to the desired power emission 402 * and schedule an adjustment in case it mismatches. 403 * 404 * @flags: OR'ed enum b43_phy_txpower_check_flags flags. 405 * See the docs below. 406 */ 407 void b43_phy_txpower_check(struct b43_wldev *dev, unsigned int flags); 408 /** 409 * enum b43_phy_txpower_check_flags - Flags for b43_phy_txpower_check() 410 * 411 * @B43_TXPWR_IGNORE_TIME: Ignore the schedule time and force-redo 412 * the check now. 413 * @B43_TXPWR_IGNORE_TSSI: Redo the recalculation, even if the average 414 * TSSI did not change. 415 */ 416 enum b43_phy_txpower_check_flags { 417 B43_TXPWR_IGNORE_TIME = (1 << 0), 418 B43_TXPWR_IGNORE_TSSI = (1 << 1), 419 }; 420 421 struct work_struct; 422 void b43_phy_txpower_adjust_work(struct work_struct *work); 423 424 /** 425 * b43_phy_shm_tssi_read - Read the average of the last 4 TSSI from SHM. 426 * 427 * @shm_offset: The SHM address to read the values from. 428 * 429 * Returns the average of the 4 TSSI values, or a negative error code. 430 */ 431 int b43_phy_shm_tssi_read(struct b43_wldev *dev, u16 shm_offset); 432 433 /** 434 * b43_phy_switch_analog_generic - Generic PHY operation for switching the Analog. 435 * 436 * It does the switching based on the PHY0 core register. 437 * Do _not_ call this directly. Only use it as a switch_analog callback 438 * for struct b43_phy_operations. 439 */ 440 void b43_phyop_switch_analog_generic(struct b43_wldev *dev, bool on); 441 442 bool b43_is_40mhz(struct b43_wldev *dev); 443 444 void b43_phy_force_clock(struct b43_wldev *dev, bool force); 445 446 #endif /* LINUX_B43_PHY_COMMON_H_ */ 447