xref: /linux/drivers/net/wireless/ath/wil6210/txrx_edma.h (revision b8fc42dc065742bc68df6a61a2aff8cbe364fa17)
1 /* SPDX-License-Identifier: ISC */
2 /*
3  * Copyright (c) 2012-2016,2018-2019, The Linux Foundation. All rights reserved.
4  */
5 
6 #ifndef WIL6210_TXRX_EDMA_H
7 #define WIL6210_TXRX_EDMA_H
8 
9 #include "wil6210.h"
10 
11 /* limit status ring size in range [ring size..max ring size] */
12 #define WIL_SRING_SIZE_ORDER_MIN	(WIL_RING_SIZE_ORDER_MIN)
13 #define WIL_SRING_SIZE_ORDER_MAX	(WIL_RING_SIZE_ORDER_MAX)
14 /* RX sring order should be bigger than RX ring order */
15 #define WIL_RX_SRING_SIZE_ORDER_DEFAULT	(12)
16 #define WIL_TX_SRING_SIZE_ORDER_DEFAULT	(14)
17 #define WIL_RX_BUFF_ARR_SIZE_DEFAULT (2600)
18 
19 #define WIL_DEFAULT_RX_STATUS_RING_ID 0
20 #define WIL_RX_DESC_RING_ID 0
21 #define WIL_RX_STATUS_IRQ_IDX 0
22 #define WIL_TX_STATUS_IRQ_IDX 1
23 
24 #define WIL_EDMA_AGG_WATERMARK (0xffff)
25 #define WIL_EDMA_AGG_WATERMARK_POS (16)
26 
27 #define WIL_EDMA_IDLE_TIME_LIMIT_USEC (50)
28 #define WIL_EDMA_TIME_UNIT_CLK_CYCLES (330) /* fits 1 usec */
29 
30 /* Error field */
31 #define WIL_RX_EDMA_ERROR_MIC	(1)
32 #define WIL_RX_EDMA_ERROR_KEY	(2) /* Key missing */
33 #define WIL_RX_EDMA_ERROR_REPLAY	(3)
34 #define WIL_RX_EDMA_ERROR_AMSDU	(4)
35 #define WIL_RX_EDMA_ERROR_FCS	(7)
36 
37 #define WIL_RX_EDMA_ERROR_L3_ERR	(BIT(0) | BIT(1))
38 #define WIL_RX_EDMA_ERROR_L4_ERR	(BIT(0) | BIT(1))
39 
40 #define WIL_RX_EDMA_DLPF_LU_MISS_BIT		BIT(11)
41 #define WIL_RX_EDMA_DLPF_LU_MISS_CID_TID_MASK	0x7
42 #define WIL_RX_EDMA_DLPF_LU_HIT_CID_TID_MASK	0xf
43 
44 #define WIL_RX_EDMA_DLPF_LU_MISS_CID_POS	2
45 #define WIL_RX_EDMA_DLPF_LU_HIT_CID_POS		4
46 
47 #define WIL_RX_EDMA_DLPF_LU_MISS_TID_POS	5
48 
49 #define WIL_RX_EDMA_MID_VALID_BIT		BIT(20)
50 
51 #define WIL_EDMA_DESC_TX_MAC_CFG_0_QID_POS 16
52 #define WIL_EDMA_DESC_TX_MAC_CFG_0_QID_LEN 6
53 
54 #define WIL_EDMA_DESC_TX_CFG_EOP_POS 0
55 #define WIL_EDMA_DESC_TX_CFG_EOP_LEN 1
56 
57 #define WIL_EDMA_DESC_TX_CFG_TSO_DESC_TYPE_POS 3
58 #define WIL_EDMA_DESC_TX_CFG_TSO_DESC_TYPE_LEN 2
59 
60 #define WIL_EDMA_DESC_TX_CFG_SEG_EN_POS 5
61 #define WIL_EDMA_DESC_TX_CFG_SEG_EN_LEN 1
62 
63 #define WIL_EDMA_DESC_TX_CFG_INSERT_IP_CHKSUM_POS 6
64 #define WIL_EDMA_DESC_TX_CFG_INSERT_IP_CHKSUM_LEN 1
65 
66 #define WIL_EDMA_DESC_TX_CFG_INSERT_TCP_CHKSUM_POS 7
67 #define WIL_EDMA_DESC_TX_CFG_INSERT_TCP_CHKSUM_LEN 1
68 
69 #define WIL_EDMA_DESC_TX_CFG_L4_TYPE_POS 15
70 #define WIL_EDMA_DESC_TX_CFG_L4_TYPE_LEN 1
71 
72 #define WIL_EDMA_DESC_TX_CFG_PSEUDO_HEADER_CALC_EN_POS 5
73 #define WIL_EDMA_DESC_TX_CFG_PSEUDO_HEADER_CALC_EN_LEN 1
74 
75 /* Enhanced Rx descriptor - MAC part
76  * [dword 0] : Reserved
77  * [dword 1] : Reserved
78  * [dword 2] : Reserved
79  * [dword 3]
80  *	bit  0..15 : Buffer ID
81  *	bit 16..31 : Reserved
82  */
83 struct wil_ring_rx_enhanced_mac {
84 	u32 d[3];
85 	__le16 buff_id;
86 	u16 reserved;
87 } __packed;
88 
89 /* Enhanced Rx descriptor - DMA part
90  * [dword 0] - Reserved
91  * [dword 1]
92  *	bit  0..31 : addr_low:32 The payload buffer address, bits 0-31
93  * [dword 2]
94  *	bit  0..15 : addr_high_low:16 The payload buffer address, bits 32-47
95  *	bit 16..31 : Reserved
96  * [dword 3]
97  *	bit  0..15 : addr_high_high:16 The payload buffer address, bits 48-63
98  *	bit 16..31 : length
99  */
100 struct wil_ring_rx_enhanced_dma {
101 	u32 d0;
102 	struct wil_ring_dma_addr addr;
103 	u16 w5;
104 	__le16 addr_high_high;
105 	__le16 length;
106 } __packed;
107 
108 struct wil_rx_enhanced_desc {
109 	struct wil_ring_rx_enhanced_mac mac;
110 	struct wil_ring_rx_enhanced_dma dma;
111 } __packed;
112 
113 /* Enhanced Tx descriptor - DMA part
114  * [dword 0]
115  *	Same as legacy
116  * [dword 1]
117  * bit  0..31 : addr_low:32 The payload buffer address, bits 0-31
118  * [dword 2]
119  * bit  0..15 : addr_high_low:16 The payload buffer address, bits 32-47
120  * bit 16..23 : ip_length:8 The IP header length for the TX IP checksum
121  *		offload feature
122  * bit 24..30 : mac_length:7
123  * bit     31 : ip_version:1 1 - IPv4, 0 - IPv6
124  * [dword 3]
125  * bit  0..15 : addr_high_high:16 The payload buffer address, bits 48-63
126  * bit 16..31 : length
127  */
128 struct wil_ring_tx_enhanced_dma {
129 	u8 l4_hdr_len;
130 	u8 cmd;
131 	u16 w1;
132 	struct wil_ring_dma_addr addr;
133 	u8  ip_length;
134 	u8  b11;       /* 0..6: mac_length; 7:ip_version */
135 	__le16 addr_high_high;
136 	__le16 length;
137 } __packed;
138 
139 /* Enhanced Tx descriptor - MAC part
140  * [dword 0]
141  * bit  0.. 9 : lifetime_expiry_value:10
142  * bit     10 : interrupt_en:1
143  * bit     11 : status_en:1
144  * bit 12..13 : txss_override:2
145  * bit     14 : timestamp_insertion:1
146  * bit     15 : duration_preserve:1
147  * bit 16..21 : reserved0:6
148  * bit 22..26 : mcs_index:5
149  * bit     27 : mcs_en:1
150  * bit 28..30 : reserved1:3
151  * bit     31 : sn_preserved:1
152  * [dword 1]
153  * bit  0.. 3 : pkt_mode:4
154  * bit      4 : pkt_mode_en:1
155  * bit  5..14 : reserved0:10
156  * bit     15 : ack_policy_en:1
157  * bit 16..19 : dst_index:4
158  * bit     20 : dst_index_en:1
159  * bit 21..22 : ack_policy:2
160  * bit     23 : lifetime_en:1
161  * bit 24..30 : max_retry:7
162  * bit     31 : max_retry_en:1
163  * [dword 2]
164  * bit  0.. 7 : num_of_descriptors:8
165  * bit  8..17 : reserved:10
166  * bit 18..19 : l2_translation_type:2 00 - bypass, 01 - 802.3, 10 - 802.11
167  * bit     20 : snap_hdr_insertion_en:1
168  * bit     21 : vlan_removal_en:1
169  * bit 22..23 : reserved0:2
170  * bit	   24 : Dest ID extension:1
171  * bit 25..31 : reserved0:7
172  * [dword 3]
173  * bit  0..15 : tso_mss:16
174  * bit 16..31 : descriptor_scratchpad:16 - mailbox between driver and ucode
175  */
176 struct wil_ring_tx_enhanced_mac {
177 	u32 d[3];
178 	__le16 tso_mss;
179 	u16 scratchpad;
180 } __packed;
181 
182 struct wil_tx_enhanced_desc {
183 	struct wil_ring_tx_enhanced_mac mac;
184 	struct wil_ring_tx_enhanced_dma dma;
185 } __packed;
186 
187 #define TX_STATUS_DESC_READY_POS 7
188 
189 /* Enhanced TX status message
190  * [dword 0]
191  *	bit  0.. 7 : Number of Descriptor:8 - The number of descriptors that
192  *		     are used to form the packets. It  is needed for WB when
193  *		     releasing the packet
194  *	bit  8..15 : tx_ring_id:8 The transmission ring ID that is related to
195  *		     the message
196  *	bit 16..23 : Status:8 - The TX status Code
197  *		0x0 - A successful transmission
198  *		0x1 - Retry expired
199  *		0x2 - Lifetime Expired
200  *		0x3 - Released
201  *		0x4-0xFF - Reserved
202  *	bit 24..30 : Reserved:7
203  *	bit     31 : Descriptor Ready bit:1 - It is initiated to
204  *		zero by the driver when the ring is created. It is set by the HW
205  *		to one for each completed status message. Each wrap around,
206  *		the DR bit value is flipped.
207  * [dword 1]
208  *	bit 0..31  : timestamp:32 - Set when MPDU is transmitted.
209  * [dword 2]
210  *	bit  0.. 4 : MCS:5 - The transmitted MCS value
211  *	bit      5 : Reserved:1
212  *	bit  6.. 7 : CB mode:2 - 0-DMG 1-EDMG 2-Wide
213  *	bit  8..12 : QID:5 - The QID that was used for the transmission
214  *	bit 13..15 : Reserved:3
215  *	bit 16..20 : Num of MSDUs:5 - Number of MSDUs in the aggregation
216  *	bit 21..22 : Reserved:2
217  *	bit     23 : Retry:1 - An indication that the transmission was retried
218  *	bit 24..31 : TX-Sector:8 - the antenna sector that was used for
219  *		     transmission
220  * [dword 3]
221  *	bit  0..11 : Sequence number:12 - The Sequence Number that was used
222  *		     for the MPDU transmission
223  *	bit 12..31 : Reserved:20
224  */
225 struct wil_ring_tx_status {
226 	u8 num_descriptors;
227 	u8 ring_id;
228 	u8 status;
229 	u8 desc_ready; /* Only the last bit should be set */
230 	u32 timestamp;
231 	u32 d2;
232 	u16 seq_number; /* Only the first 12 bits */
233 	u16 w7;
234 } __packed;
235 
236 /* Enhanced Rx status message - compressed part
237  * [dword 0]
238  *	bit  0.. 2 : L2 Rx Status:3 - The L2 packet reception Status
239  *		     0-Success, 1-MIC Error, 2-Key Error, 3-Replay Error,
240  *		     4-A-MSDU Error, 5-Reserved, 6-Reserved, 7-FCS Error
241  *	bit  3.. 4 : L3 Rx Status:2 - Bit0 - L3I - L3 identified and checksum
242  *		     calculated, Bit1- L3Err - IPv4 Checksum Error
243  *	bit  5.. 6 : L4 Rx Status:2 - Bit0 - L4I - L4 identified and checksum
244  *		     calculated, Bit1- L4Err - TCP/UDP Checksum Error
245  *	bit      7 : Reserved:1
246  *	bit  8..19 : Flow ID:12 - MSDU flow ID
247  *	bit     20 : MID_V:1 - The MAC ID field is valid
248  *	bit 21..22 : MID:2 - The MAC ID
249  *	bit     23 : L3T:1 - IP types: 0-IPv6, 1-IPv4
250  *	bit     24 : L4T:1 - Layer 4 Type: 0-UDP, 1-TCP
251  *	bit     25 : BC:1 - The received MPDU is broadcast
252  *	bit     26 : MC:1 - The received MPDU is multicast
253  *	bit     27 : Raw:1 - The MPDU received with no translation
254  *	bit     28 : Sec:1 - The FC control (b14) - Frame Protected
255  *	bit     29 : Error:1 - An error is set when (L2 status != 0) ||
256  *		(L3 status == 3) || (L4 status == 3)
257  *	bit     30 : EOP:1 - End of MSDU signaling. It is set to mark the end
258  *		     of the transfer, otherwise the status indicates buffer
259  *		     only completion.
260  *	bit     31 : Descriptor Ready bit:1 - It is initiated to
261  *		     zero by the driver when the ring is created. It is set
262  *		     by the HW to one for each completed status message.
263  *		     Each wrap around, the DR bit value is flipped.
264  * [dword 1]
265  *	bit  0.. 5 : MAC Len:6 - The number of bytes that are used for L2 header
266  *	bit  6..11 : IPLEN:6 - The number of DW that are used for L3 header
267  *	bit 12..15 : I4Len:4 - The number of DW that are used for L4 header
268  *	bit 16..21 : MCS:6 - The received MCS field from the PLCP Header
269  *	bit 22..23 : CB mode:2 - The CB Mode: 0-DMG, 1-EDMG, 2-Wide
270  *	bit 24..27 : Data Offset:4 - The data offset, a code that describe the
271  *		     payload shift from the beginning of the buffer:
272  *		     0 - 0 Bytes, 3 - 2 Bytes
273  *	bit     28 : A-MSDU Present:1 - The QoS (b7) A-MSDU present field
274  *	bit     29 : A-MSDU Type:1 The QoS (b8) A-MSDU Type field
275  *	bit     30 : A-MPDU:1 - Packet is part of aggregated MPDU
276  *	bit     31 : Key ID:1 - The extracted Key ID from the encryption header
277  * [dword 2]
278  *	bit  0..15 : Buffer ID:16 - The Buffer Identifier
279  *	bit 16..31 : Length:16 - It indicates the valid bytes that are stored
280  *		     in the current descriptor buffer. For multiple buffer
281  *		     descriptor, SW need to sum the total descriptor length
282  *		     in all buffers to produce the packet length
283  * [dword 3]
284  *	bit  0..31  : timestamp:32 - The MPDU Timestamp.
285  */
286 struct wil_rx_status_compressed {
287 	u32 d0;
288 	u32 d1;
289 	__le16 buff_id;
290 	__le16 length;
291 	u32 timestamp;
292 } __packed;
293 
294 /* Enhanced Rx status message - extension part
295  * [dword 0]
296  *	bit  0.. 4 : QID:5 - The Queue Identifier that the packet is received
297  *		     from
298  *	bit  5.. 7 : Reserved:3
299  *	bit  8..11 : TID:4 - The QoS (b3-0) TID Field
300  *	bit 12..15   Source index:4 - The Source index that was found
301 		     during Parsing the TA. This field is used to define the
302 		     source of the packet
303  *	bit 16..18 : Destination index:3 - The Destination index that
304 		     was found during Parsing the RA.
305  *	bit 19..20 : DS Type:2 - The FC Control (b9-8) - From / To DS
306  *	bit 21..22 : MIC ICR:2 - this signal tells the DMA to assert an
307 		     interrupt after it writes the packet
308  *	bit     23 : ESOP:1 - The QoS (b4) ESOP field
309  *	bit     24 : RDG:1
310  *	bit 25..31 : Reserved:7
311  * [dword 1]
312  *	bit  0.. 1 : Frame Type:2 - The FC Control (b3-2) - MPDU Type
313 		     (management, data, control and extension)
314  *	bit  2.. 5 : Syb type:4 - The FC Control (b7-4) - Frame Subtype
315  *	bit  6..11 : Ext sub type:6 - The FC Control (b11-8) - Frame Extended
316  *                   Subtype
317  *	bit 12..13 : ACK Policy:2 - The QoS (b6-5) ACK Policy fields
318  *	bit 14     : DECRYPT_BYP:1 - The MPDU is bypass by the decryption unit
319  *	bit 15..23 : Reserved:9
320  *	bit 24..31 : RSSI/SNR:8 - The RSSI / SNR measurement for the received
321  *                   MPDU
322  * [dword 2]
323  *	bit  0..11 : SN:12 - The received Sequence number field
324  *	bit 12..15 : Reserved:4
325  *	bit 16..31 : PN bits [15:0]:16
326  * [dword 3]
327  *	bit  0..31 : PN bits [47:16]:32
328  */
329 struct wil_rx_status_extension {
330 	u32 d0;
331 	u32 d1;
332 	__le16 seq_num; /* only lower 12 bits */
333 	struct_group_attr(pn, __packed,
334 		u16 pn_15_0;
335 		u32 pn_47_16;
336 	);
337 } __packed;
338 
339 struct wil_rx_status_extended {
340 	struct wil_rx_status_compressed comp;
341 	struct wil_rx_status_extension ext;
342 } __packed;
343 
344 static inline void *wil_skb_rxstatus(struct sk_buff *skb)
345 {
346 	return (void *)skb->cb;
347 }
348 
349 static inline __le16 wil_rx_status_get_length(void *msg)
350 {
351 	return ((struct wil_rx_status_compressed *)msg)->length;
352 }
353 
354 static inline u8 wil_rx_status_get_mcs(void *msg)
355 {
356 	return WIL_GET_BITS(((struct wil_rx_status_compressed *)msg)->d1,
357 			    16, 21);
358 }
359 
360 static inline u8 wil_rx_status_get_cb_mode(void *msg)
361 {
362 	return WIL_GET_BITS(((struct wil_rx_status_compressed *)msg)->d1,
363 			    22, 23);
364 }
365 
366 static inline u16 wil_rx_status_get_flow_id(void *msg)
367 {
368 	return WIL_GET_BITS(((struct wil_rx_status_compressed *)msg)->d0,
369 			    8, 19);
370 }
371 
372 static inline u8 wil_rx_status_get_mcast(void *msg)
373 {
374 	return WIL_GET_BITS(((struct wil_rx_status_compressed *)msg)->d0,
375 			    26, 26);
376 }
377 
378 /**
379  * In case of DLPF miss the parsing of flow Id should be as follows:
380  * dest_id:2
381  * src_id :3 - cid
382  * tid:3
383  * Otherwise:
384  * tid:4
385  * cid:4
386  */
387 
388 static inline u8 wil_rx_status_get_cid(void *msg)
389 {
390 	u16 val = wil_rx_status_get_flow_id(msg);
391 
392 	if (val & WIL_RX_EDMA_DLPF_LU_MISS_BIT)
393 		/* CID is in bits 2..4 */
394 		return (val >> WIL_RX_EDMA_DLPF_LU_MISS_CID_POS) &
395 			WIL_RX_EDMA_DLPF_LU_MISS_CID_TID_MASK;
396 	else
397 		/* CID is in bits 4..7 */
398 		return (val >> WIL_RX_EDMA_DLPF_LU_HIT_CID_POS) &
399 			WIL_RX_EDMA_DLPF_LU_HIT_CID_TID_MASK;
400 }
401 
402 static inline u8 wil_rx_status_get_tid(void *msg)
403 {
404 	u16 val = wil_rx_status_get_flow_id(msg);
405 
406 	if (val & WIL_RX_EDMA_DLPF_LU_MISS_BIT)
407 		/* TID is in bits 5..7 */
408 		return (val >> WIL_RX_EDMA_DLPF_LU_MISS_TID_POS) &
409 			WIL_RX_EDMA_DLPF_LU_MISS_CID_TID_MASK;
410 	else
411 		/* TID is in bits 0..3 */
412 		return val & WIL_RX_EDMA_DLPF_LU_MISS_CID_TID_MASK;
413 }
414 
415 static inline int wil_rx_status_get_eop(void *msg) /* EoP = End of Packet */
416 {
417 	return WIL_GET_BITS(((struct wil_rx_status_compressed *)msg)->d0,
418 			    30, 30);
419 }
420 
421 static inline void wil_rx_status_reset_buff_id(struct wil_status_ring *s)
422 {
423 	((struct wil_rx_status_compressed *)
424 		(s->va + (s->elem_size * s->swhead)))->buff_id = 0;
425 }
426 
427 static inline __le16 wil_rx_status_get_buff_id(void *msg)
428 {
429 	return ((struct wil_rx_status_compressed *)msg)->buff_id;
430 }
431 
432 static inline u8 wil_rx_status_get_data_offset(void *msg)
433 {
434 	u8 val = WIL_GET_BITS(((struct wil_rx_status_compressed *)msg)->d1,
435 			      24, 27);
436 
437 	switch (val) {
438 	case 0: return 0;
439 	case 3: return 2;
440 	default: return 0xFF;
441 	}
442 }
443 
444 static inline int wil_rx_status_get_frame_type(struct wil6210_priv *wil,
445 					       void *msg)
446 {
447 	if (wil->use_compressed_rx_status)
448 		return IEEE80211_FTYPE_DATA;
449 
450 	return WIL_GET_BITS(((struct wil_rx_status_extended *)msg)->ext.d1,
451 			    0, 1) << 2;
452 }
453 
454 static inline int wil_rx_status_get_fc1(struct wil6210_priv *wil, void *msg)
455 {
456 	if (wil->use_compressed_rx_status)
457 		return 0;
458 
459 	return WIL_GET_BITS(((struct wil_rx_status_extended *)msg)->ext.d1,
460 			    0, 5) << 2;
461 }
462 
463 static inline __le16 wil_rx_status_get_seq(struct wil6210_priv *wil, void *msg)
464 {
465 	if (wil->use_compressed_rx_status)
466 		return 0;
467 
468 	return ((struct wil_rx_status_extended *)msg)->ext.seq_num;
469 }
470 
471 static inline u8 wil_rx_status_get_retry(void *msg)
472 {
473 	/* retry bit is missing in EDMA HW. return 1 to be on the safe side */
474 	return 1;
475 }
476 
477 static inline int wil_rx_status_get_mid(void *msg)
478 {
479 	if (!(((struct wil_rx_status_compressed *)msg)->d0 &
480 	    WIL_RX_EDMA_MID_VALID_BIT))
481 		return 0; /* use the default MID */
482 
483 	return WIL_GET_BITS(((struct wil_rx_status_compressed *)msg)->d0,
484 			    21, 22);
485 }
486 
487 static inline int wil_rx_status_get_error(void *msg)
488 {
489 	return WIL_GET_BITS(((struct wil_rx_status_compressed *)msg)->d0,
490 			    29, 29);
491 }
492 
493 static inline int wil_rx_status_get_l2_rx_status(void *msg)
494 {
495 	return WIL_GET_BITS(((struct wil_rx_status_compressed *)msg)->d0,
496 			    0, 2);
497 }
498 
499 static inline int wil_rx_status_get_l3_rx_status(void *msg)
500 {
501 	return WIL_GET_BITS(((struct wil_rx_status_compressed *)msg)->d0,
502 			    3, 4);
503 }
504 
505 static inline int wil_rx_status_get_l4_rx_status(void *msg)
506 {
507 	return WIL_GET_BITS(((struct wil_rx_status_compressed *)msg)->d0,
508 			    5, 6);
509 }
510 
511 /* L4	L3	Expected result
512  * 0	0	Ok. No L3 and no L4 known protocols found.
513  *		Treated as L2 packet. (no offloads on this packet)
514  * 0	1	Ok. It means that L3 was found, and checksum check passed.
515  *		No known L4 protocol was found.
516  * 0	2	It means that L3 protocol was found, and checksum check failed.
517  *		No L4 known protocol was found.
518  * 1	any	Ok. It means that L4 was found, and checksum check passed.
519  * 3	0	Not a possible scenario.
520  * 3	1	Recalculate. It means that L3 protocol was found, and checksum
521  *		passed. But L4 checksum failed. Need to see if really failed,
522  *		or due to fragmentation.
523  * 3	2	Both L3 and L4 checksum check failed.
524  */
525 static inline int wil_rx_status_get_checksum(void *msg,
526 					     struct wil_net_stats *stats)
527 {
528 	int l3_rx_status = wil_rx_status_get_l3_rx_status(msg);
529 	int l4_rx_status = wil_rx_status_get_l4_rx_status(msg);
530 
531 	if (l4_rx_status == 1)
532 		return CHECKSUM_UNNECESSARY;
533 
534 	if (l4_rx_status == 0 && l3_rx_status == 1)
535 		return CHECKSUM_UNNECESSARY;
536 
537 	if (l3_rx_status == 0 && l4_rx_status == 0)
538 		/* L2 packet */
539 		return CHECKSUM_NONE;
540 
541 	/* If HW reports bad checksum, let IP stack re-check it
542 	 * For example, HW doesn't understand Microsoft IP stack that
543 	 * mis-calculates TCP checksum - if it should be 0x0,
544 	 * it writes 0xffff in violation of RFC 1624
545 	 */
546 	stats->rx_csum_err++;
547 	return CHECKSUM_NONE;
548 }
549 
550 static inline int wil_rx_status_get_security(void *msg)
551 {
552 	return WIL_GET_BITS(((struct wil_rx_status_compressed *)msg)->d0,
553 			    28, 28);
554 }
555 
556 static inline u8 wil_rx_status_get_key_id(void *msg)
557 {
558 	return WIL_GET_BITS(((struct wil_rx_status_compressed *)msg)->d1,
559 			    31, 31);
560 }
561 
562 static inline u8 wil_tx_status_get_mcs(struct wil_ring_tx_status *msg)
563 {
564 	return WIL_GET_BITS(msg->d2, 0, 4);
565 }
566 
567 static inline u32 wil_ring_next_head(struct wil_ring *ring)
568 {
569 	return (ring->swhead + 1) % ring->size;
570 }
571 
572 static inline void wil_desc_set_addr_edma(struct wil_ring_dma_addr *addr,
573 					  __le16 *addr_high_high,
574 					  dma_addr_t pa)
575 {
576 	addr->addr_low = cpu_to_le32(lower_32_bits(pa));
577 	addr->addr_high = cpu_to_le16((u16)upper_32_bits(pa));
578 	*addr_high_high = cpu_to_le16((u16)(upper_32_bits(pa) >> 16));
579 }
580 
581 static inline
582 dma_addr_t wil_tx_desc_get_addr_edma(struct wil_ring_tx_enhanced_dma *dma)
583 {
584 	return le32_to_cpu(dma->addr.addr_low) |
585 			   ((u64)le16_to_cpu(dma->addr.addr_high) << 32) |
586 			   ((u64)le16_to_cpu(dma->addr_high_high) << 48);
587 }
588 
589 static inline
590 dma_addr_t wil_rx_desc_get_addr_edma(struct wil_ring_rx_enhanced_dma *dma)
591 {
592 	return le32_to_cpu(dma->addr.addr_low) |
593 			   ((u64)le16_to_cpu(dma->addr.addr_high) << 32) |
594 			   ((u64)le16_to_cpu(dma->addr_high_high) << 48);
595 }
596 
597 void wil_configure_interrupt_moderation_edma(struct wil6210_priv *wil);
598 int wil_tx_sring_handler(struct wil6210_priv *wil,
599 			 struct wil_status_ring *sring);
600 void wil_rx_handle_edma(struct wil6210_priv *wil, int *quota);
601 void wil_init_txrx_ops_edma(struct wil6210_priv *wil);
602 
603 #endif /* WIL6210_TXRX_EDMA_H */
604 
605