1config ATH9K_HW 2 tristate 3config ATH9K_COMMON 4 tristate 5 select ATH_COMMON 6config ATH9K_COMMON_DEBUG 7 bool 8config ATH9K_DFS_DEBUGFS 9 def_bool y 10 depends on ATH9K_DEBUGFS && ATH9K_DFS_CERTIFIED 11 12config ATH9K_BTCOEX_SUPPORT 13 bool "Atheros bluetooth coexistence support" 14 depends on (ATH9K || ATH9K_HTC) 15 default y 16 ---help--- 17 Say Y, if you want to use the ath9k/ath9k_htc radios together with 18 Bluetooth modules in the same system. 19 20config ATH9K 21 tristate "Atheros 802.11n wireless cards support" 22 depends on MAC80211 && HAS_DMA 23 select ATH9K_HW 24 select MAC80211_LEDS 25 select LEDS_CLASS 26 select NEW_LEDS 27 select ATH9K_COMMON 28 ---help--- 29 This module adds support for wireless adapters based on 30 Atheros IEEE 802.11n AR5008, AR9001 and AR9002 family 31 of chipsets. For a specific list of supported external 32 cards, laptops that already ship with these cards and 33 APs that come with these cards refer to ath9k wiki 34 products page: 35 36 http://wireless.kernel.org/en/users/Drivers/ath9k/products 37 38 If you choose to build a module, it'll be called ath9k. 39 40config ATH9K_PCI 41 bool "Atheros ath9k PCI/PCIe bus support" 42 default y 43 depends on ATH9K && PCI 44 ---help--- 45 This option enables the PCI bus support in ath9k. 46 47 Say Y, if you have a compatible PCI/PCIe wireless card. 48 49config ATH9K_AHB 50 bool "Atheros ath9k AHB bus support" 51 depends on ATH9K 52 default n 53 ---help--- 54 This option enables the AHB bus support in ath9k. 55 56 Say Y, if you have a SoC with a compatible built-in 57 wireless MAC. Say N if unsure. 58 59config ATH9K_DEBUGFS 60 bool "Atheros ath9k debugging" 61 depends on ATH9K && DEBUG_FS 62 select MAC80211_DEBUGFS 63 select ATH9K_COMMON_DEBUG 64 ---help--- 65 Say Y, if you need access to ath9k's statistics for 66 interrupts, rate control, etc. 67 68 Also required for changing debug message flags at run time and for 69 TX99. 70 71config ATH9K_STATION_STATISTICS 72 bool "Detailed station statistics" 73 depends on ATH9K && ATH9K_DEBUGFS && DEBUG_FS 74 select MAC80211_DEBUGFS 75 default n 76 ---help--- 77 This option enables detailed statistics for association stations. 78 79config ATH9K_TX99 80 bool "Atheros ath9k TX99 testing support" 81 depends on ATH9K_DEBUGFS && CFG80211_CERTIFICATION_ONUS 82 default n 83 ---help--- 84 Say N. This should only be enabled on systems undergoing 85 certification testing and evaluation in a controlled environment. 86 Enabling this will only enable TX99 support, all other modes of 87 operation will be disabled. 88 89 TX99 support enables Specific Absorption Rate (SAR) testing. 90 SAR is the unit of measurement for the amount of radio frequency(RF) 91 absorbed by the body when using a wireless device. The RF exposure 92 limits used are expressed in the terms of SAR, which is a measure 93 of the electric and magnetic field strength and power density for 94 transmitters operating at frequencies from 300 kHz to 100 GHz. 95 Regulatory bodies around the world require that wireless device 96 be evaluated to meet the RF exposure limits set forth in the 97 governmental SAR regulations. 98 99config ATH9K_DFS_CERTIFIED 100 bool "Atheros DFS support for certified platforms" 101 depends on ATH9K && CFG80211_CERTIFICATION_ONUS 102 default n 103 ---help--- 104 This option enables DFS support for initiating radiation on 105 ath9k. There is no way to dynamically detect if a card was DFS 106 certified and as such this is left as a build time option. This 107 option should only be enabled by system integrators that can 108 guarantee that all the platforms that their kernel will run on 109 have obtained appropriate regulatory body certification for a 110 respective Atheros card by using ath9k on the target shipping 111 platforms. 112 113 This is currently only a placeholder for future DFS support, 114 as DFS support requires more components that still need to be 115 developed. At this point enabling this option won't do anything 116 except increase code size. 117 118config ATH9K_DYNACK 119 bool "Atheros ath9k ACK timeout estimation algorithm" 120 depends on ATH9K 121 default n 122 ---help--- 123 This option enables ath9k dynamic ACK timeout estimation algorithm 124 based on ACK frame RX timestamp, TX frame timestamp and frame 125 duration 126 127config ATH9K_WOW 128 bool "Wake on Wireless LAN support (EXPERIMENTAL)" 129 depends on ATH9K && PM 130 default n 131 ---help--- 132 This option enables Wake on Wireless LAN support for certain cards. 133 Currently, AR9462 is supported. 134 135config ATH9K_RFKILL 136 bool "Atheros ath9k rfkill support" if EXPERT 137 depends on ATH9K 138 depends on RFKILL=y || RFKILL=ATH9K 139 default y 140 help 141 Say Y to have ath9k poll the RF-Kill GPIO every couple of 142 seconds. Turn off to save power, but enable it if you have 143 a platform that can toggle the RF-Kill GPIO. 144 145config ATH9K_CHANNEL_CONTEXT 146 bool "Channel Context support" 147 depends on ATH9K 148 default n 149 ---help--- 150 This option enables channel context support in ath9k, which is needed 151 for multi-channel concurrency. Enable this if P2P PowerSave support 152 is required. 153 154config ATH9K_PCOEM 155 bool "Atheros ath9k support for PC OEM cards" if EXPERT 156 depends on ATH9K 157 default y 158 159config ATH9K_HTC 160 tristate "Atheros HTC based wireless cards support" 161 depends on USB && MAC80211 162 select ATH9K_HW 163 select MAC80211_LEDS 164 select LEDS_CLASS 165 select NEW_LEDS 166 select ATH9K_COMMON 167 ---help--- 168 Support for Atheros HTC based cards. 169 Chipsets supported: AR9271 170 171 For more information: http://wireless.kernel.org/en/users/Drivers/ath9k_htc 172 173 The built module will be ath9k_htc. 174 175config ATH9K_HTC_DEBUGFS 176 bool "Atheros ath9k_htc debugging" 177 depends on ATH9K_HTC && DEBUG_FS 178 select ATH9K_COMMON_DEBUG 179 ---help--- 180 Say Y, if you need access to ath9k_htc's statistics. 181 As well as access to the FFT/spectral data. 182 183config ATH9K_HWRNG 184 bool "Random number generator support" 185 depends on ATH9K && (HW_RANDOM = y || HW_RANDOM = ATH9K) 186 default n 187 ---help--- 188 This option incorporates the ADC register output as a source of 189 randomness into Linux entropy pool (/dev/urandom and /dev/random) 190 191 Say Y, feeds the entropy directly from the WiFi driver to the input 192 pool. 193 194config ATH9K_COMMON_SPECTRAL 195 bool "Atheros ath9k/ath9k_htc spectral scan support" 196 depends on ATH9K_DEBUGFS || ATH9K_HTC_DEBUGFS 197 select RELAY 198 default n 199 ---help--- 200 Say Y to enable access to the FFT/spectral data via debugfs. 201