1 /* 2 * Copyright (c) 2006-2008 Nick Kossifidis <mickflemm@gmail.com> 3 * Copyright (c) 2004-2008 Reyk Floeter <reyk@openbsd.org> 4 * Copyright (c) 2007-2008 Michael Taylor <mike.taylor@apprion.com> 5 * 6 * Permission to use, copy, modify, and distribute this software for any 7 * purpose with or without fee is hereby granted, provided that the above 8 * copyright notice and this permission notice appear in all copies. 9 * 10 * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES 11 * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF 12 * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR 13 * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES 14 * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN 15 * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF 16 * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. 17 * 18 */ 19 20 /* 21 * Register values for Atheros 5210/5211/5212 cards from OpenBSD's ar5k 22 * maintained by Reyk Floeter 23 * 24 * I tried to document those registers by looking at ar5k code, some 25 * 802.11 (802.11e mostly) papers and by reading various public available 26 * Atheros presentations and papers like these: 27 * 28 * 5210 - http://nova.stanford.edu/~bbaas/ps/isscc2002_slides.pdf 29 * 30 * 5211 - http://www.hotchips.org/archives/hc14/3_Tue/16_mcfarland.pdf 31 * 32 * This file also contains register values found on a memory dump of 33 * Atheros's ART program (Atheros Radio Test), on ath9k, on legacy-hal 34 * released by Atheros and on various debug messages found on the net. 35 */ 36 37 #include "../reg.h" 38 39 /*====MAC DMA REGISTERS====*/ 40 41 /* 42 * AR5210-Specific TXDP registers 43 * 5210 has only 2 transmit queues so no DCU/QCU, just 44 * 2 transmit descriptor pointers... 45 */ 46 #define AR5K_NOQCU_TXDP0 0x0000 /* Queue 0 - data */ 47 #define AR5K_NOQCU_TXDP1 0x0004 /* Queue 1 - beacons */ 48 49 /* 50 * Mac Control Register 51 */ 52 #define AR5K_CR 0x0008 /* Register Address */ 53 #define AR5K_CR_TXE0 0x00000001 /* TX Enable for queue 0 on 5210 */ 54 #define AR5K_CR_TXE1 0x00000002 /* TX Enable for queue 1 on 5210 */ 55 #define AR5K_CR_RXE 0x00000004 /* RX Enable */ 56 #define AR5K_CR_TXD0 0x00000008 /* TX Disable for queue 0 on 5210 */ 57 #define AR5K_CR_TXD1 0x00000010 /* TX Disable for queue 1 on 5210 */ 58 #define AR5K_CR_RXD 0x00000020 /* RX Disable */ 59 #define AR5K_CR_SWI 0x00000040 /* Software Interrupt */ 60 61 /* 62 * RX Descriptor Pointer register 63 */ 64 #define AR5K_RXDP 0x000c 65 66 /* 67 * Configuration and status register 68 */ 69 #define AR5K_CFG 0x0014 /* Register Address */ 70 #define AR5K_CFG_SWTD 0x00000001 /* Byte-swap TX descriptor (for big endian archs) */ 71 #define AR5K_CFG_SWTB 0x00000002 /* Byte-swap TX buffer */ 72 #define AR5K_CFG_SWRD 0x00000004 /* Byte-swap RX descriptor */ 73 #define AR5K_CFG_SWRB 0x00000008 /* Byte-swap RX buffer */ 74 #define AR5K_CFG_SWRG 0x00000010 /* Byte-swap Register access */ 75 #define AR5K_CFG_IBSS 0x00000020 /* 0-BSS, 1-IBSS [5211+] */ 76 #define AR5K_CFG_PHY_OK 0x00000100 /* [5211+] */ 77 #define AR5K_CFG_EEBS 0x00000200 /* EEPROM is busy */ 78 #define AR5K_CFG_CLKGD 0x00000400 /* Clock gated (Disable dynamic clock) */ 79 #define AR5K_CFG_TXCNT 0x00007800 /* Tx frame count (?) [5210] */ 80 #define AR5K_CFG_TXCNT_S 11 81 #define AR5K_CFG_TXFSTAT 0x00008000 /* Tx frame status (?) [5210] */ 82 #define AR5K_CFG_TXFSTRT 0x00010000 /* [5210] */ 83 #define AR5K_CFG_PCI_THRES 0x00060000 /* PCI Master req q threshold [5211+] */ 84 #define AR5K_CFG_PCI_THRES_S 17 85 86 /* 87 * Interrupt enable register 88 */ 89 #define AR5K_IER 0x0024 /* Register Address */ 90 #define AR5K_IER_DISABLE 0x00000000 /* Disable card interrupts */ 91 #define AR5K_IER_ENABLE 0x00000001 /* Enable card interrupts */ 92 93 94 /* 95 * 0x0028 is Beacon Control Register on 5210 96 * and first RTS duration register on 5211 97 */ 98 99 /* 100 * Beacon control register [5210] 101 */ 102 #define AR5K_BCR 0x0028 /* Register Address */ 103 #define AR5K_BCR_AP 0x00000000 /* AP mode */ 104 #define AR5K_BCR_ADHOC 0x00000001 /* Ad-Hoc mode */ 105 #define AR5K_BCR_BDMAE 0x00000002 /* DMA enable */ 106 #define AR5K_BCR_TQ1FV 0x00000004 /* Use Queue1 for CAB traffic */ 107 #define AR5K_BCR_TQ1V 0x00000008 /* Use Queue1 for Beacon traffic */ 108 #define AR5K_BCR_BCGET 0x00000010 109 110 /* 111 * First RTS duration register [5211] 112 */ 113 #define AR5K_RTSD0 0x0028 /* Register Address */ 114 #define AR5K_RTSD0_6 0x000000ff /* 6Mb RTS duration mask (?) */ 115 #define AR5K_RTSD0_6_S 0 /* 6Mb RTS duration shift (?) */ 116 #define AR5K_RTSD0_9 0x0000ff00 /* 9Mb*/ 117 #define AR5K_RTSD0_9_S 8 118 #define AR5K_RTSD0_12 0x00ff0000 /* 12Mb*/ 119 #define AR5K_RTSD0_12_S 16 120 #define AR5K_RTSD0_18 0xff000000 /* 16Mb*/ 121 #define AR5K_RTSD0_18_S 24 122 123 124 /* 125 * 0x002c is Beacon Status Register on 5210 126 * and second RTS duration register on 5211 127 */ 128 129 /* 130 * Beacon status register [5210] 131 * 132 * As i can see in ar5k_ar5210_tx_start Reyk uses some of the values of BCR 133 * for this register, so i guess TQ1V,TQ1FV and BDMAE have the same meaning 134 * here and SNP/SNAP means "snapshot" (so this register gets synced with BCR). 135 * So SNAPPEDBCRVALID should also stand for "snapped BCR -values- valid", so i 136 * renamed it to SNAPSHOTSVALID to make more sense. I really have no idea what 137 * else can it be. I also renamed SNPBCMD to SNPADHOC to match BCR. 138 */ 139 #define AR5K_BSR 0x002c /* Register Address */ 140 #define AR5K_BSR_BDLYSW 0x00000001 /* SW Beacon delay (?) */ 141 #define AR5K_BSR_BDLYDMA 0x00000002 /* DMA Beacon delay (?) */ 142 #define AR5K_BSR_TXQ1F 0x00000004 /* Beacon queue (1) finished */ 143 #define AR5K_BSR_ATIMDLY 0x00000008 /* ATIM delay (?) */ 144 #define AR5K_BSR_SNPADHOC 0x00000100 /* Ad-hoc mode set (?) */ 145 #define AR5K_BSR_SNPBDMAE 0x00000200 /* Beacon DMA enabled (?) */ 146 #define AR5K_BSR_SNPTQ1FV 0x00000400 /* Queue1 is used for CAB traffic (?) */ 147 #define AR5K_BSR_SNPTQ1V 0x00000800 /* Queue1 is used for Beacon traffic (?) */ 148 #define AR5K_BSR_SNAPSHOTSVALID 0x00001000 /* BCR snapshots are valid (?) */ 149 #define AR5K_BSR_SWBA_CNT 0x00ff0000 150 151 /* 152 * Second RTS duration register [5211] 153 */ 154 #define AR5K_RTSD1 0x002c /* Register Address */ 155 #define AR5K_RTSD1_24 0x000000ff /* 24Mb */ 156 #define AR5K_RTSD1_24_S 0 157 #define AR5K_RTSD1_36 0x0000ff00 /* 36Mb */ 158 #define AR5K_RTSD1_36_S 8 159 #define AR5K_RTSD1_48 0x00ff0000 /* 48Mb */ 160 #define AR5K_RTSD1_48_S 16 161 #define AR5K_RTSD1_54 0xff000000 /* 54Mb */ 162 #define AR5K_RTSD1_54_S 24 163 164 165 /* 166 * Transmit configuration register 167 */ 168 #define AR5K_TXCFG 0x0030 /* Register Address */ 169 #define AR5K_TXCFG_SDMAMR 0x00000007 /* DMA size (read) */ 170 #define AR5K_TXCFG_SDMAMR_S 0 171 #define AR5K_TXCFG_B_MODE 0x00000008 /* Set b mode for 5111 (enable 2111) */ 172 #define AR5K_TXCFG_TXFSTP 0x00000008 /* TX DMA full Stop [5210] */ 173 #define AR5K_TXCFG_TXFULL 0x000003f0 /* TX Trigger level mask */ 174 #define AR5K_TXCFG_TXFULL_S 4 175 #define AR5K_TXCFG_TXFULL_0B 0x00000000 176 #define AR5K_TXCFG_TXFULL_64B 0x00000010 177 #define AR5K_TXCFG_TXFULL_128B 0x00000020 178 #define AR5K_TXCFG_TXFULL_192B 0x00000030 179 #define AR5K_TXCFG_TXFULL_256B 0x00000040 180 #define AR5K_TXCFG_TXCONT_EN 0x00000080 181 #define AR5K_TXCFG_DMASIZE 0x00000100 /* Flag for passing DMA size [5210] */ 182 #define AR5K_TXCFG_JUMBO_DESC_EN 0x00000400 /* Enable jumbo tx descriptors [5211+] */ 183 #define AR5K_TXCFG_ADHOC_BCN_ATIM 0x00000800 /* Adhoc Beacon ATIM Policy */ 184 #define AR5K_TXCFG_ATIM_WINDOW_DEF_DIS 0x00001000 /* Disable ATIM window defer [5211+] */ 185 #define AR5K_TXCFG_RTSRND 0x00001000 /* [5211+] */ 186 #define AR5K_TXCFG_FRMPAD_DIS 0x00002000 /* [5211+] */ 187 #define AR5K_TXCFG_RDY_CBR_DIS 0x00004000 /* Ready time CBR disable [5211+] */ 188 #define AR5K_TXCFG_JUMBO_FRM_MODE 0x00008000 /* Jumbo frame mode [5211+] */ 189 #define AR5K_TXCFG_DCU_DBL_BUF_DIS 0x00008000 /* Disable double buffering on DCU */ 190 #define AR5K_TXCFG_DCU_CACHING_DIS 0x00010000 /* Disable DCU caching */ 191 192 /* 193 * Receive configuration register 194 */ 195 #define AR5K_RXCFG 0x0034 /* Register Address */ 196 #define AR5K_RXCFG_SDMAMW 0x00000007 /* DMA size (write) */ 197 #define AR5K_RXCFG_SDMAMW_S 0 198 #define AR5K_RXCFG_ZLFDMA 0x00000008 /* Enable Zero-length frame DMA */ 199 #define AR5K_RXCFG_DEF_ANTENNA 0x00000010 /* Default antenna (?) */ 200 #define AR5K_RXCFG_JUMBO_RXE 0x00000020 /* Enable jumbo rx descriptors [5211+] */ 201 #define AR5K_RXCFG_JUMBO_WRAP 0x00000040 /* Wrap jumbo frames [5211+] */ 202 #define AR5K_RXCFG_SLE_ENTRY 0x00000080 /* Sleep entry policy */ 203 204 /* 205 * Receive jumbo descriptor last address register 206 * Only found in 5211 (?) 207 */ 208 #define AR5K_RXJLA 0x0038 209 210 /* 211 * MIB control register 212 */ 213 #define AR5K_MIBC 0x0040 /* Register Address */ 214 #define AR5K_MIBC_COW 0x00000001 /* Counter Overflow Warning */ 215 #define AR5K_MIBC_FMC 0x00000002 /* Freeze MIB Counters */ 216 #define AR5K_MIBC_CMC 0x00000004 /* Clear MIB Counters */ 217 #define AR5K_MIBC_MCS 0x00000008 /* MIB counter strobe, increment all */ 218 219 /* 220 * Timeout prescale register 221 */ 222 #define AR5K_TOPS 0x0044 223 #define AR5K_TOPS_M 0x0000ffff 224 225 /* 226 * Receive timeout register (no frame received) 227 */ 228 #define AR5K_RXNOFRM 0x0048 229 #define AR5K_RXNOFRM_M 0x000003ff 230 231 /* 232 * Transmit timeout register (no frame sent) 233 */ 234 #define AR5K_TXNOFRM 0x004c 235 #define AR5K_TXNOFRM_M 0x000003ff 236 #define AR5K_TXNOFRM_QCU 0x000ffc00 237 #define AR5K_TXNOFRM_QCU_S 10 238 239 /* 240 * Receive frame gap timeout register 241 */ 242 #define AR5K_RPGTO 0x0050 243 #define AR5K_RPGTO_M 0x000003ff 244 245 /* 246 * Receive frame count limit register 247 */ 248 #define AR5K_RFCNT 0x0054 249 #define AR5K_RFCNT_M 0x0000001f /* [5211+] (?) */ 250 #define AR5K_RFCNT_RFCL 0x0000000f /* [5210] */ 251 252 /* 253 * Misc settings register 254 * (reserved0-3) 255 */ 256 #define AR5K_MISC 0x0058 /* Register Address */ 257 #define AR5K_MISC_DMA_OBS_M 0x000001e0 258 #define AR5K_MISC_DMA_OBS_S 5 259 #define AR5K_MISC_MISC_OBS_M 0x00000e00 260 #define AR5K_MISC_MISC_OBS_S 9 261 #define AR5K_MISC_MAC_OBS_LSB_M 0x00007000 262 #define AR5K_MISC_MAC_OBS_LSB_S 12 263 #define AR5K_MISC_MAC_OBS_MSB_M 0x00038000 264 #define AR5K_MISC_MAC_OBS_MSB_S 15 265 #define AR5K_MISC_LED_DECAY 0x001c0000 /* [5210] */ 266 #define AR5K_MISC_LED_BLINK 0x00e00000 /* [5210] */ 267 268 /* 269 * QCU/DCU clock gating register (5311) 270 * (reserved4-5) 271 */ 272 #define AR5K_QCUDCU_CLKGT 0x005c /* Register Address (?) */ 273 #define AR5K_QCUDCU_CLKGT_QCU 0x0000ffff /* Mask for QCU clock */ 274 #define AR5K_QCUDCU_CLKGT_DCU 0x07ff0000 /* Mask for DCU clock */ 275 276 /* 277 * Interrupt Status Registers 278 * 279 * For 5210 there is only one status register but for 280 * 5211/5212 we have one primary and 4 secondary registers. 281 * So we have AR5K_ISR for 5210 and AR5K_PISR /SISRx for 5211/5212. 282 * Most of these bits are common for all chipsets. 283 * 284 * NOTE: On 5211+ TXOK, TXDESC, TXERR, TXEOL and TXURN contain 285 * the logical OR from per-queue interrupt bits found on SISR registers 286 * (see below). 287 */ 288 #define AR5K_ISR 0x001c /* Register Address [5210] */ 289 #define AR5K_PISR 0x0080 /* Register Address [5211+] */ 290 #define AR5K_ISR_RXOK 0x00000001 /* Frame successfully received */ 291 #define AR5K_ISR_RXDESC 0x00000002 /* RX descriptor request */ 292 #define AR5K_ISR_RXERR 0x00000004 /* Receive error */ 293 #define AR5K_ISR_RXNOFRM 0x00000008 /* No frame received (receive timeout) */ 294 #define AR5K_ISR_RXEOL 0x00000010 /* Empty RX descriptor */ 295 #define AR5K_ISR_RXORN 0x00000020 /* Receive FIFO overrun */ 296 #define AR5K_ISR_TXOK 0x00000040 /* Frame successfully transmitted */ 297 #define AR5K_ISR_TXDESC 0x00000080 /* TX descriptor request */ 298 #define AR5K_ISR_TXERR 0x00000100 /* Transmit error */ 299 #define AR5K_ISR_TXNOFRM 0x00000200 /* No frame transmitted (transmit timeout) 300 * NOTE: We don't have per-queue info for this 301 * one, but we can enable it per-queue through 302 * TXNOFRM_QCU field on TXNOFRM register */ 303 #define AR5K_ISR_TXEOL 0x00000400 /* Empty TX descriptor */ 304 #define AR5K_ISR_TXURN 0x00000800 /* Transmit FIFO underrun */ 305 #define AR5K_ISR_MIB 0x00001000 /* Update MIB counters */ 306 #define AR5K_ISR_SWI 0x00002000 /* Software interrupt */ 307 #define AR5K_ISR_RXPHY 0x00004000 /* PHY error */ 308 #define AR5K_ISR_RXKCM 0x00008000 /* RX Key cache miss */ 309 #define AR5K_ISR_SWBA 0x00010000 /* Software beacon alert */ 310 #define AR5K_ISR_BRSSI 0x00020000 /* Beacon rssi below threshold (?) */ 311 #define AR5K_ISR_BMISS 0x00040000 /* Beacon missed */ 312 #define AR5K_ISR_HIUERR 0x00080000 /* Host Interface Unit error [5211+] 313 * 'or' of MCABT, SSERR, DPERR from SISR2 */ 314 #define AR5K_ISR_BNR 0x00100000 /* Beacon not ready [5211+] */ 315 #define AR5K_ISR_MCABT 0x00100000 /* Master Cycle Abort [5210] */ 316 #define AR5K_ISR_RXCHIRP 0x00200000 /* CHIRP Received [5212+] */ 317 #define AR5K_ISR_SSERR 0x00200000 /* Signaled System Error [5210] */ 318 #define AR5K_ISR_DPERR 0x00400000 /* Bus parity error [5210] */ 319 #define AR5K_ISR_RXDOPPLER 0x00400000 /* Doppler chirp received [5212+] */ 320 #define AR5K_ISR_TIM 0x00800000 /* [5211+] */ 321 #define AR5K_ISR_BCNMISC 0x00800000 /* Misc beacon related interrupt 322 * 'or' of TIM, CAB_END, DTIM_SYNC, BCN_TIMEOUT, 323 * CAB_TIMEOUT and DTIM bits from SISR2 [5212+] */ 324 #define AR5K_ISR_GPIO 0x01000000 /* GPIO (rf kill) */ 325 #define AR5K_ISR_QCBRORN 0x02000000 /* QCU CBR overrun [5211+] */ 326 #define AR5K_ISR_QCBRURN 0x04000000 /* QCU CBR underrun [5211+] */ 327 #define AR5K_ISR_QTRIG 0x08000000 /* QCU scheduling trigger [5211+] */ 328 329 #define AR5K_ISR_BITS_FROM_SISRS (AR5K_ISR_TXOK | AR5K_ISR_TXDESC |\ 330 AR5K_ISR_TXERR | AR5K_ISR_TXEOL |\ 331 AR5K_ISR_TXURN | AR5K_ISR_HIUERR |\ 332 AR5K_ISR_BCNMISC | AR5K_ISR_QCBRORN |\ 333 AR5K_ISR_QCBRURN | AR5K_ISR_QTRIG) 334 335 /* 336 * Secondary status registers [5211+] (0 - 4) 337 * 338 * These give the status for each QCU, only QCUs 0-9 are 339 * represented. 340 */ 341 #define AR5K_SISR0 0x0084 /* Register Address [5211+] */ 342 #define AR5K_SISR0_QCU_TXOK 0x000003ff /* Mask for QCU_TXOK */ 343 #define AR5K_SISR0_QCU_TXOK_S 0 344 #define AR5K_SISR0_QCU_TXDESC 0x03ff0000 /* Mask for QCU_TXDESC */ 345 #define AR5K_SISR0_QCU_TXDESC_S 16 346 347 #define AR5K_SISR1 0x0088 /* Register Address [5211+] */ 348 #define AR5K_SISR1_QCU_TXERR 0x000003ff /* Mask for QCU_TXERR */ 349 #define AR5K_SISR1_QCU_TXERR_S 0 350 #define AR5K_SISR1_QCU_TXEOL 0x03ff0000 /* Mask for QCU_TXEOL */ 351 #define AR5K_SISR1_QCU_TXEOL_S 16 352 353 #define AR5K_SISR2 0x008c /* Register Address [5211+] */ 354 #define AR5K_SISR2_QCU_TXURN 0x000003ff /* Mask for QCU_TXURN */ 355 #define AR5K_SISR2_QCU_TXURN_S 0 356 #define AR5K_SISR2_MCABT 0x00010000 /* Master Cycle Abort */ 357 #define AR5K_SISR2_SSERR 0x00020000 /* Signaled System Error */ 358 #define AR5K_SISR2_DPERR 0x00040000 /* Bus parity error */ 359 #define AR5K_SISR2_TIM 0x01000000 /* [5212+] */ 360 #define AR5K_SISR2_CAB_END 0x02000000 /* [5212+] */ 361 #define AR5K_SISR2_DTIM_SYNC 0x04000000 /* DTIM sync lost [5212+] */ 362 #define AR5K_SISR2_BCN_TIMEOUT 0x08000000 /* Beacon Timeout [5212+] */ 363 #define AR5K_SISR2_CAB_TIMEOUT 0x10000000 /* CAB Timeout [5212+] */ 364 #define AR5K_SISR2_DTIM 0x20000000 /* [5212+] */ 365 #define AR5K_SISR2_TSFOOR 0x80000000 /* TSF Out of range */ 366 367 #define AR5K_SISR3 0x0090 /* Register Address [5211+] */ 368 #define AR5K_SISR3_QCBRORN 0x000003ff /* Mask for QCBRORN */ 369 #define AR5K_SISR3_QCBRORN_S 0 370 #define AR5K_SISR3_QCBRURN 0x03ff0000 /* Mask for QCBRURN */ 371 #define AR5K_SISR3_QCBRURN_S 16 372 373 #define AR5K_SISR4 0x0094 /* Register Address [5211+] */ 374 #define AR5K_SISR4_QTRIG 0x000003ff /* Mask for QTRIG */ 375 #define AR5K_SISR4_QTRIG_S 0 376 377 /* 378 * Shadow read-and-clear interrupt status registers [5211+] 379 */ 380 #define AR5K_RAC_PISR 0x00c0 /* Read and clear PISR */ 381 #define AR5K_RAC_SISR0 0x00c4 /* Read and clear SISR0 */ 382 #define AR5K_RAC_SISR1 0x00c8 /* Read and clear SISR1 */ 383 #define AR5K_RAC_SISR2 0x00cc /* Read and clear SISR2 */ 384 #define AR5K_RAC_SISR3 0x00d0 /* Read and clear SISR3 */ 385 #define AR5K_RAC_SISR4 0x00d4 /* Read and clear SISR4 */ 386 387 /* 388 * Interrupt Mask Registers 389 * 390 * As with ISRs 5210 has one IMR (AR5K_IMR) and 5211/5212 has one primary 391 * (AR5K_PIMR) and 4 secondary IMRs (AR5K_SIMRx). Note that ISR/IMR flags match. 392 */ 393 #define AR5K_IMR 0x0020 /* Register Address [5210] */ 394 #define AR5K_PIMR 0x00a0 /* Register Address [5211+] */ 395 #define AR5K_IMR_RXOK 0x00000001 /* Frame successfully received*/ 396 #define AR5K_IMR_RXDESC 0x00000002 /* RX descriptor request*/ 397 #define AR5K_IMR_RXERR 0x00000004 /* Receive error*/ 398 #define AR5K_IMR_RXNOFRM 0x00000008 /* No frame received (receive timeout)*/ 399 #define AR5K_IMR_RXEOL 0x00000010 /* Empty RX descriptor*/ 400 #define AR5K_IMR_RXORN 0x00000020 /* Receive FIFO overrun*/ 401 #define AR5K_IMR_TXOK 0x00000040 /* Frame successfully transmitted*/ 402 #define AR5K_IMR_TXDESC 0x00000080 /* TX descriptor request*/ 403 #define AR5K_IMR_TXERR 0x00000100 /* Transmit error*/ 404 #define AR5K_IMR_TXNOFRM 0x00000200 /* No frame transmitted (transmit timeout)*/ 405 #define AR5K_IMR_TXEOL 0x00000400 /* Empty TX descriptor*/ 406 #define AR5K_IMR_TXURN 0x00000800 /* Transmit FIFO underrun*/ 407 #define AR5K_IMR_MIB 0x00001000 /* Update MIB counters*/ 408 #define AR5K_IMR_SWI 0x00002000 /* Software interrupt */ 409 #define AR5K_IMR_RXPHY 0x00004000 /* PHY error*/ 410 #define AR5K_IMR_RXKCM 0x00008000 /* RX Key cache miss */ 411 #define AR5K_IMR_SWBA 0x00010000 /* Software beacon alert*/ 412 #define AR5K_IMR_BRSSI 0x00020000 /* Beacon rssi below threshold (?) */ 413 #define AR5K_IMR_BMISS 0x00040000 /* Beacon missed*/ 414 #define AR5K_IMR_HIUERR 0x00080000 /* Host Interface Unit error [5211+] */ 415 #define AR5K_IMR_BNR 0x00100000 /* Beacon not ready [5211+] */ 416 #define AR5K_IMR_MCABT 0x00100000 /* Master Cycle Abort [5210] */ 417 #define AR5K_IMR_RXCHIRP 0x00200000 /* CHIRP Received [5212+]*/ 418 #define AR5K_IMR_SSERR 0x00200000 /* Signaled System Error [5210] */ 419 #define AR5K_IMR_DPERR 0x00400000 /* Det par Error (?) [5210] */ 420 #define AR5K_IMR_RXDOPPLER 0x00400000 /* Doppler chirp received [5212+] */ 421 #define AR5K_IMR_TIM 0x00800000 /* [5211+] */ 422 #define AR5K_IMR_BCNMISC 0x00800000 /* 'or' of TIM, CAB_END, DTIM_SYNC, BCN_TIMEOUT, 423 CAB_TIMEOUT and DTIM bits from SISR2 [5212+] */ 424 #define AR5K_IMR_GPIO 0x01000000 /* GPIO (rf kill)*/ 425 #define AR5K_IMR_QCBRORN 0x02000000 /* QCU CBR overrun (?) [5211+] */ 426 #define AR5K_IMR_QCBRURN 0x04000000 /* QCU CBR underrun (?) [5211+] */ 427 #define AR5K_IMR_QTRIG 0x08000000 /* QCU scheduling trigger [5211+] */ 428 429 /* 430 * Secondary interrupt mask registers [5211+] (0 - 4) 431 */ 432 #define AR5K_SIMR0 0x00a4 /* Register Address [5211+] */ 433 #define AR5K_SIMR0_QCU_TXOK 0x000003ff /* Mask for QCU_TXOK */ 434 #define AR5K_SIMR0_QCU_TXOK_S 0 435 #define AR5K_SIMR0_QCU_TXDESC 0x03ff0000 /* Mask for QCU_TXDESC */ 436 #define AR5K_SIMR0_QCU_TXDESC_S 16 437 438 #define AR5K_SIMR1 0x00a8 /* Register Address [5211+] */ 439 #define AR5K_SIMR1_QCU_TXERR 0x000003ff /* Mask for QCU_TXERR */ 440 #define AR5K_SIMR1_QCU_TXERR_S 0 441 #define AR5K_SIMR1_QCU_TXEOL 0x03ff0000 /* Mask for QCU_TXEOL */ 442 #define AR5K_SIMR1_QCU_TXEOL_S 16 443 444 #define AR5K_SIMR2 0x00ac /* Register Address [5211+] */ 445 #define AR5K_SIMR2_QCU_TXURN 0x000003ff /* Mask for QCU_TXURN */ 446 #define AR5K_SIMR2_QCU_TXURN_S 0 447 #define AR5K_SIMR2_MCABT 0x00010000 /* Master Cycle Abort */ 448 #define AR5K_SIMR2_SSERR 0x00020000 /* Signaled System Error */ 449 #define AR5K_SIMR2_DPERR 0x00040000 /* Bus parity error */ 450 #define AR5K_SIMR2_TIM 0x01000000 /* [5212+] */ 451 #define AR5K_SIMR2_CAB_END 0x02000000 /* [5212+] */ 452 #define AR5K_SIMR2_DTIM_SYNC 0x04000000 /* DTIM Sync lost [5212+] */ 453 #define AR5K_SIMR2_BCN_TIMEOUT 0x08000000 /* Beacon Timeout [5212+] */ 454 #define AR5K_SIMR2_CAB_TIMEOUT 0x10000000 /* CAB Timeout [5212+] */ 455 #define AR5K_SIMR2_DTIM 0x20000000 /* [5212+] */ 456 #define AR5K_SIMR2_TSFOOR 0x80000000 /* TSF OOR (?) */ 457 458 #define AR5K_SIMR3 0x00b0 /* Register Address [5211+] */ 459 #define AR5K_SIMR3_QCBRORN 0x000003ff /* Mask for QCBRORN */ 460 #define AR5K_SIMR3_QCBRORN_S 0 461 #define AR5K_SIMR3_QCBRURN 0x03ff0000 /* Mask for QCBRURN */ 462 #define AR5K_SIMR3_QCBRURN_S 16 463 464 #define AR5K_SIMR4 0x00b4 /* Register Address [5211+] */ 465 #define AR5K_SIMR4_QTRIG 0x000003ff /* Mask for QTRIG */ 466 #define AR5K_SIMR4_QTRIG_S 0 467 468 /* 469 * DMA Debug registers 0-7 470 * 0xe0 - 0xfc 471 */ 472 473 /* 474 * Decompression mask registers [5212+] 475 */ 476 #define AR5K_DCM_ADDR 0x0400 /*Decompression mask address (index) */ 477 #define AR5K_DCM_DATA 0x0404 /*Decompression mask data */ 478 479 /* 480 * Wake On Wireless pattern control register [5212+] 481 */ 482 #define AR5K_WOW_PCFG 0x0410 /* Register Address */ 483 #define AR5K_WOW_PCFG_PAT_MATCH_EN 0x00000001 /* Pattern match enable */ 484 #define AR5K_WOW_PCFG_LONG_FRAME_POL 0x00000002 /* Long frame policy */ 485 #define AR5K_WOW_PCFG_WOBMISS 0x00000004 /* Wake on bea(con) miss (?) */ 486 #define AR5K_WOW_PCFG_PAT_0_EN 0x00000100 /* Enable pattern 0 */ 487 #define AR5K_WOW_PCFG_PAT_1_EN 0x00000200 /* Enable pattern 1 */ 488 #define AR5K_WOW_PCFG_PAT_2_EN 0x00000400 /* Enable pattern 2 */ 489 #define AR5K_WOW_PCFG_PAT_3_EN 0x00000800 /* Enable pattern 3 */ 490 #define AR5K_WOW_PCFG_PAT_4_EN 0x00001000 /* Enable pattern 4 */ 491 #define AR5K_WOW_PCFG_PAT_5_EN 0x00002000 /* Enable pattern 5 */ 492 493 /* 494 * Wake On Wireless pattern index register (?) [5212+] 495 */ 496 #define AR5K_WOW_PAT_IDX 0x0414 497 498 /* 499 * Wake On Wireless pattern data register [5212+] 500 */ 501 #define AR5K_WOW_PAT_DATA 0x0418 /* Register Address */ 502 #define AR5K_WOW_PAT_DATA_0_3_V 0x00000001 /* Pattern 0, 3 value */ 503 #define AR5K_WOW_PAT_DATA_1_4_V 0x00000100 /* Pattern 1, 4 value */ 504 #define AR5K_WOW_PAT_DATA_2_5_V 0x00010000 /* Pattern 2, 5 value */ 505 #define AR5K_WOW_PAT_DATA_0_3_M 0x01000000 /* Pattern 0, 3 mask */ 506 #define AR5K_WOW_PAT_DATA_1_4_M 0x04000000 /* Pattern 1, 4 mask */ 507 #define AR5K_WOW_PAT_DATA_2_5_M 0x10000000 /* Pattern 2, 5 mask */ 508 509 /* 510 * Decompression configuration registers [5212+] 511 */ 512 #define AR5K_DCCFG 0x0420 /* Register Address */ 513 #define AR5K_DCCFG_GLOBAL_EN 0x00000001 /* Enable decompression on all queues */ 514 #define AR5K_DCCFG_BYPASS_EN 0x00000002 /* Bypass decompression */ 515 #define AR5K_DCCFG_BCAST_EN 0x00000004 /* Enable decompression for bcast frames */ 516 #define AR5K_DCCFG_MCAST_EN 0x00000008 /* Enable decompression for mcast frames */ 517 518 /* 519 * Compression configuration registers [5212+] 520 */ 521 #define AR5K_CCFG 0x0600 /* Register Address */ 522 #define AR5K_CCFG_WINDOW_SIZE 0x00000007 /* Compression window size */ 523 #define AR5K_CCFG_CPC_EN 0x00000008 /* Enable performance counters */ 524 525 #define AR5K_CCFG_CCU 0x0604 /* Register Address */ 526 #define AR5K_CCFG_CCU_CUP_EN 0x00000001 /* CCU Catchup enable */ 527 #define AR5K_CCFG_CCU_CREDIT 0x00000002 /* CCU Credit (field) */ 528 #define AR5K_CCFG_CCU_CD_THRES 0x00000080 /* CCU Cyc(lic?) debt threshold (field) */ 529 #define AR5K_CCFG_CCU_CUP_LCNT 0x00010000 /* CCU Catchup lit(?) count */ 530 #define AR5K_CCFG_CCU_INIT 0x00100200 /* Initial value during reset */ 531 532 /* 533 * Compression performance counter registers [5212+] 534 */ 535 #define AR5K_CPC0 0x0610 /* Compression performance counter 0 */ 536 #define AR5K_CPC1 0x0614 /* Compression performance counter 1*/ 537 #define AR5K_CPC2 0x0618 /* Compression performance counter 2 */ 538 #define AR5K_CPC3 0x061c /* Compression performance counter 3 */ 539 #define AR5K_CPCOVF 0x0620 /* Compression performance overflow */ 540 541 542 /* 543 * Queue control unit (QCU) registers [5211+] 544 * 545 * Card has 12 TX Queues but i see that only 0-9 are used (?) 546 * both in binary HAL (see ah.h) and ar5k. Each queue has it's own 547 * TXDP at addresses 0x0800 - 0x082c, a CBR (Constant Bit Rate) 548 * configuration register (0x08c0 - 0x08ec), a ready time configuration 549 * register (0x0900 - 0x092c), a misc configuration register (0x09c0 - 550 * 0x09ec) and a status register (0x0a00 - 0x0a2c). We also have some 551 * global registers, QCU transmit enable/disable and "one shot arm (?)" 552 * set/clear, which contain status for all queues (we shift by 1 for each 553 * queue). To access these registers easily we define some macros here 554 * that are used inside HAL. For more infos check out *_tx_queue functs. 555 */ 556 557 /* 558 * Generic QCU Register access macros 559 */ 560 #define AR5K_QUEUE_REG(_r, _q) (((_q) << 2) + _r) 561 #define AR5K_QCU_GLOBAL_READ(_r, _q) (AR5K_REG_READ(_r) & (1 << _q)) 562 #define AR5K_QCU_GLOBAL_WRITE(_r, _q) AR5K_REG_WRITE(_r, (1 << _q)) 563 564 /* 565 * QCU Transmit descriptor pointer registers 566 */ 567 #define AR5K_QCU_TXDP_BASE 0x0800 /* Register Address - Queue0 TXDP */ 568 #define AR5K_QUEUE_TXDP(_q) AR5K_QUEUE_REG(AR5K_QCU_TXDP_BASE, _q) 569 570 /* 571 * QCU Transmit enable register 572 */ 573 #define AR5K_QCU_TXE 0x0840 574 #define AR5K_ENABLE_QUEUE(_q) AR5K_QCU_GLOBAL_WRITE(AR5K_QCU_TXE, _q) 575 #define AR5K_QUEUE_ENABLED(_q) AR5K_QCU_GLOBAL_READ(AR5K_QCU_TXE, _q) 576 577 /* 578 * QCU Transmit disable register 579 */ 580 #define AR5K_QCU_TXD 0x0880 581 #define AR5K_DISABLE_QUEUE(_q) AR5K_QCU_GLOBAL_WRITE(AR5K_QCU_TXD, _q) 582 #define AR5K_QUEUE_DISABLED(_q) AR5K_QCU_GLOBAL_READ(AR5K_QCU_TXD, _q) 583 584 /* 585 * QCU Constant Bit Rate configuration registers 586 */ 587 #define AR5K_QCU_CBRCFG_BASE 0x08c0 /* Register Address - Queue0 CBRCFG */ 588 #define AR5K_QCU_CBRCFG_INTVAL 0x00ffffff /* CBR Interval mask */ 589 #define AR5K_QCU_CBRCFG_INTVAL_S 0 590 #define AR5K_QCU_CBRCFG_ORN_THRES 0xff000000 /* CBR overrun threshold mask */ 591 #define AR5K_QCU_CBRCFG_ORN_THRES_S 24 592 #define AR5K_QUEUE_CBRCFG(_q) AR5K_QUEUE_REG(AR5K_QCU_CBRCFG_BASE, _q) 593 594 /* 595 * QCU Ready time configuration registers 596 */ 597 #define AR5K_QCU_RDYTIMECFG_BASE 0x0900 /* Register Address - Queue0 RDYTIMECFG */ 598 #define AR5K_QCU_RDYTIMECFG_INTVAL 0x00ffffff /* Ready time interval mask */ 599 #define AR5K_QCU_RDYTIMECFG_INTVAL_S 0 600 #define AR5K_QCU_RDYTIMECFG_ENABLE 0x01000000 /* Ready time enable mask */ 601 #define AR5K_QUEUE_RDYTIMECFG(_q) AR5K_QUEUE_REG(AR5K_QCU_RDYTIMECFG_BASE, _q) 602 603 /* 604 * QCU one shot arm set registers 605 */ 606 #define AR5K_QCU_ONESHOTARM_SET 0x0940 /* Register Address -QCU "one shot arm set (?)" */ 607 #define AR5K_QCU_ONESHOTARM_SET_M 0x0000ffff 608 609 /* 610 * QCU one shot arm clear registers 611 */ 612 #define AR5K_QCU_ONESHOTARM_CLEAR 0x0980 /* Register Address -QCU "one shot arm clear (?)" */ 613 #define AR5K_QCU_ONESHOTARM_CLEAR_M 0x0000ffff 614 615 /* 616 * QCU misc registers 617 */ 618 #define AR5K_QCU_MISC_BASE 0x09c0 /* Register Address -Queue0 MISC */ 619 #define AR5K_QCU_MISC_FRSHED_M 0x0000000f /* Frame scheduling mask */ 620 #define AR5K_QCU_MISC_FRSHED_ASAP 0 /* ASAP */ 621 #define AR5K_QCU_MISC_FRSHED_CBR 1 /* Constant Bit Rate */ 622 #define AR5K_QCU_MISC_FRSHED_DBA_GT 2 /* DMA Beacon alert gated */ 623 #define AR5K_QCU_MISC_FRSHED_TIM_GT 3 /* TIMT gated */ 624 #define AR5K_QCU_MISC_FRSHED_BCN_SENT_GT 4 /* Beacon sent gated */ 625 #define AR5K_QCU_MISC_ONESHOT_ENABLE 0x00000010 /* Oneshot enable */ 626 #define AR5K_QCU_MISC_CBREXP_DIS 0x00000020 /* Disable CBR expired counter (normal queue) */ 627 #define AR5K_QCU_MISC_CBREXP_BCN_DIS 0x00000040 /* Disable CBR expired counter (beacon queue) */ 628 #define AR5K_QCU_MISC_BCN_ENABLE 0x00000080 /* Enable Beacon use */ 629 #define AR5K_QCU_MISC_CBR_THRES_ENABLE 0x00000100 /* CBR expired threshold enabled */ 630 #define AR5K_QCU_MISC_RDY_VEOL_POLICY 0x00000200 /* TXE reset when RDYTIME expired or VEOL */ 631 #define AR5K_QCU_MISC_CBR_RESET_CNT 0x00000400 /* CBR threshold (counter) reset */ 632 #define AR5K_QCU_MISC_DCU_EARLY 0x00000800 /* DCU early termination */ 633 #define AR5K_QCU_MISC_DCU_CMP_EN 0x00001000 /* Enable frame compression */ 634 #define AR5K_QUEUE_MISC(_q) AR5K_QUEUE_REG(AR5K_QCU_MISC_BASE, _q) 635 636 637 /* 638 * QCU status registers 639 */ 640 #define AR5K_QCU_STS_BASE 0x0a00 /* Register Address - Queue0 STS */ 641 #define AR5K_QCU_STS_FRMPENDCNT 0x00000003 /* Frames pending counter */ 642 #define AR5K_QCU_STS_CBREXPCNT 0x0000ff00 /* CBR expired counter */ 643 #define AR5K_QUEUE_STATUS(_q) AR5K_QUEUE_REG(AR5K_QCU_STS_BASE, _q) 644 645 /* 646 * QCU ready time shutdown register 647 */ 648 #define AR5K_QCU_RDYTIMESHDN 0x0a40 649 #define AR5K_QCU_RDYTIMESHDN_M 0x000003ff 650 651 /* 652 * QCU compression buffer base registers [5212+] 653 */ 654 #define AR5K_QCU_CBB_SELECT 0x0b00 655 #define AR5K_QCU_CBB_ADDR 0x0b04 656 #define AR5K_QCU_CBB_ADDR_S 9 657 658 /* 659 * QCU compression buffer configuration register [5212+] 660 * (buffer size) 661 */ 662 #define AR5K_QCU_CBCFG 0x0b08 663 664 665 666 /* 667 * Distributed Coordination Function (DCF) control unit (DCU) 668 * registers [5211+] 669 * 670 * These registers control the various characteristics of each queue 671 * for 802.11e (WME) compatibility so they go together with 672 * QCU registers in pairs. For each queue we have a QCU mask register, 673 * (0x1000 - 0x102c), a local-IFS settings register (0x1040 - 0x106c), 674 * a retry limit register (0x1080 - 0x10ac), a channel time register 675 * (0x10c0 - 0x10ec), a misc-settings register (0x1100 - 0x112c) and 676 * a sequence number register (0x1140 - 0x116c). It seems that "global" 677 * registers here affect all queues (see use of DCU_GBL_IFS_SLOT in ar5k). 678 * We use the same macros here for easier register access. 679 * 680 */ 681 682 /* 683 * DCU QCU mask registers 684 */ 685 #define AR5K_DCU_QCUMASK_BASE 0x1000 /* Register Address -Queue0 DCU_QCUMASK */ 686 #define AR5K_DCU_QCUMASK_M 0x000003ff 687 #define AR5K_QUEUE_QCUMASK(_q) AR5K_QUEUE_REG(AR5K_DCU_QCUMASK_BASE, _q) 688 689 /* 690 * DCU local Inter Frame Space settings register 691 */ 692 #define AR5K_DCU_LCL_IFS_BASE 0x1040 /* Register Address -Queue0 DCU_LCL_IFS */ 693 #define AR5K_DCU_LCL_IFS_CW_MIN 0x000003ff /* Minimum Contention Window */ 694 #define AR5K_DCU_LCL_IFS_CW_MIN_S 0 695 #define AR5K_DCU_LCL_IFS_CW_MAX 0x000ffc00 /* Maximum Contention Window */ 696 #define AR5K_DCU_LCL_IFS_CW_MAX_S 10 697 #define AR5K_DCU_LCL_IFS_AIFS 0x0ff00000 /* Arbitrated Interframe Space */ 698 #define AR5K_DCU_LCL_IFS_AIFS_S 20 699 #define AR5K_DCU_LCL_IFS_AIFS_MAX 0xfc /* Anything above that can cause DCU to hang */ 700 #define AR5K_QUEUE_DFS_LOCAL_IFS(_q) AR5K_QUEUE_REG(AR5K_DCU_LCL_IFS_BASE, _q) 701 702 /* 703 * DCU retry limit registers 704 * all these fields don't allow zero values 705 */ 706 #define AR5K_DCU_RETRY_LMT_BASE 0x1080 /* Register Address -Queue0 DCU_RETRY_LMT */ 707 #define AR5K_DCU_RETRY_LMT_RTS 0x0000000f /* RTS failure limit. Transmission fails if no CTS is received for this number of times */ 708 #define AR5K_DCU_RETRY_LMT_RTS_S 0 709 #define AR5K_DCU_RETRY_LMT_STA_RTS 0x00003f00 /* STA RTS failure limit. If exceeded CW reset */ 710 #define AR5K_DCU_RETRY_LMT_STA_RTS_S 8 711 #define AR5K_DCU_RETRY_LMT_STA_DATA 0x000fc000 /* STA data failure limit. If exceeded CW reset. */ 712 #define AR5K_DCU_RETRY_LMT_STA_DATA_S 14 713 #define AR5K_QUEUE_DFS_RETRY_LIMIT(_q) AR5K_QUEUE_REG(AR5K_DCU_RETRY_LMT_BASE, _q) 714 715 /* 716 * DCU channel time registers 717 */ 718 #define AR5K_DCU_CHAN_TIME_BASE 0x10c0 /* Register Address -Queue0 DCU_CHAN_TIME */ 719 #define AR5K_DCU_CHAN_TIME_DUR 0x000fffff /* Channel time duration */ 720 #define AR5K_DCU_CHAN_TIME_DUR_S 0 721 #define AR5K_DCU_CHAN_TIME_ENABLE 0x00100000 /* Enable channel time */ 722 #define AR5K_QUEUE_DFS_CHANNEL_TIME(_q) AR5K_QUEUE_REG(AR5K_DCU_CHAN_TIME_BASE, _q) 723 724 /* 725 * DCU misc registers [5211+] 726 * 727 * Note: Arbiter lockout control controls the 728 * behaviour on low priority queues when we have multiple queues 729 * with pending frames. Intra-frame lockout means we wait until 730 * the queue's current frame transmits (with post frame backoff and bursting) 731 * before we transmit anything else and global lockout means we 732 * wait for the whole queue to finish before higher priority queues 733 * can transmit (this is used on beacon and CAB queues). 734 * No lockout means there is no special handling. 735 */ 736 #define AR5K_DCU_MISC_BASE 0x1100 /* Register Address -Queue0 DCU_MISC */ 737 #define AR5K_DCU_MISC_BACKOFF 0x0000003f /* Mask for backoff threshold */ 738 #define AR5K_DCU_MISC_ETS_RTS_POL 0x00000040 /* End of transmission series 739 station RTS/data failure count 740 reset policy (?) */ 741 #define AR5K_DCU_MISC_ETS_CW_POL 0x00000080 /* End of transmission series 742 CW reset policy */ 743 #define AR5K_DCU_MISC_FRAG_WAIT 0x00000100 /* Wait for next fragment */ 744 #define AR5K_DCU_MISC_BACKOFF_FRAG 0x00000200 /* Enable backoff while bursting */ 745 #define AR5K_DCU_MISC_HCFPOLL_ENABLE 0x00000800 /* CF - Poll enable */ 746 #define AR5K_DCU_MISC_BACKOFF_PERSIST 0x00001000 /* Persistent backoff */ 747 #define AR5K_DCU_MISC_FRMPRFTCH_ENABLE 0x00002000 /* Enable frame pre-fetch */ 748 #define AR5K_DCU_MISC_VIRTCOL 0x0000c000 /* Mask for Virtual Collision (?) */ 749 #define AR5K_DCU_MISC_VIRTCOL_NORMAL 0 750 #define AR5K_DCU_MISC_VIRTCOL_IGNORE 1 751 #define AR5K_DCU_MISC_BCN_ENABLE 0x00010000 /* Enable Beacon use */ 752 #define AR5K_DCU_MISC_ARBLOCK_CTL 0x00060000 /* Arbiter lockout control mask */ 753 #define AR5K_DCU_MISC_ARBLOCK_CTL_S 17 754 #define AR5K_DCU_MISC_ARBLOCK_CTL_NONE 0 /* No arbiter lockout */ 755 #define AR5K_DCU_MISC_ARBLOCK_CTL_INTFRM 1 /* Intra-frame lockout */ 756 #define AR5K_DCU_MISC_ARBLOCK_CTL_GLOBAL 2 /* Global lockout */ 757 #define AR5K_DCU_MISC_ARBLOCK_IGNORE 0x00080000 /* Ignore Arbiter lockout */ 758 #define AR5K_DCU_MISC_SEQ_NUM_INCR_DIS 0x00100000 /* Disable sequence number increment */ 759 #define AR5K_DCU_MISC_POST_FR_BKOFF_DIS 0x00200000 /* Disable post-frame backoff */ 760 #define AR5K_DCU_MISC_VIRT_COLL_POLICY 0x00400000 /* Virtual Collision cw policy */ 761 #define AR5K_DCU_MISC_BLOWN_IFS_POLICY 0x00800000 /* Blown IFS policy (?) */ 762 #define AR5K_DCU_MISC_SEQNUM_CTL 0x01000000 /* Sequence number control (?) */ 763 #define AR5K_QUEUE_DFS_MISC(_q) AR5K_QUEUE_REG(AR5K_DCU_MISC_BASE, _q) 764 765 /* 766 * DCU frame sequence number registers 767 */ 768 #define AR5K_DCU_SEQNUM_BASE 0x1140 769 #define AR5K_DCU_SEQNUM_M 0x00000fff 770 #define AR5K_QUEUE_DCU_SEQNUM(_q) AR5K_QUEUE_REG(AR5K_DCU_SEQNUM_BASE, _q) 771 772 /* 773 * DCU global IFS SIFS register 774 */ 775 #define AR5K_DCU_GBL_IFS_SIFS 0x1030 776 #define AR5K_DCU_GBL_IFS_SIFS_M 0x0000ffff 777 778 /* 779 * DCU global IFS slot interval register 780 */ 781 #define AR5K_DCU_GBL_IFS_SLOT 0x1070 782 #define AR5K_DCU_GBL_IFS_SLOT_M 0x0000ffff 783 784 /* 785 * DCU global IFS EIFS register 786 */ 787 #define AR5K_DCU_GBL_IFS_EIFS 0x10b0 788 #define AR5K_DCU_GBL_IFS_EIFS_M 0x0000ffff 789 790 /* 791 * DCU global IFS misc register 792 * 793 * LFSR stands for Linear Feedback Shift Register 794 * and it's used for generating pseudo-random 795 * number sequences. 796 * 797 * (If i understand correctly, random numbers are 798 * used for idle sensing -multiplied with cwmin/max etc-) 799 */ 800 #define AR5K_DCU_GBL_IFS_MISC 0x10f0 /* Register Address */ 801 #define AR5K_DCU_GBL_IFS_MISC_LFSR_SLICE 0x00000007 /* LFSR Slice Select */ 802 #define AR5K_DCU_GBL_IFS_MISC_TURBO_MODE 0x00000008 /* Turbo mode */ 803 #define AR5K_DCU_GBL_IFS_MISC_SIFS_DUR_USEC 0x000003f0 /* SIFS Duration mask */ 804 #define AR5K_DCU_GBL_IFS_MISC_SIFS_DUR_USEC_S 4 805 #define AR5K_DCU_GBL_IFS_MISC_USEC_DUR 0x000ffc00 /* USEC Duration mask */ 806 #define AR5K_DCU_GBL_IFS_MISC_USEC_DUR_S 10 807 #define AR5K_DCU_GBL_IFS_MISC_DCU_ARB_DELAY 0x00300000 /* DCU Arbiter delay mask */ 808 #define AR5K_DCU_GBL_IFS_MISC_SIFS_CNT_RST 0x00400000 /* SIFS cnt reset policy (?) */ 809 #define AR5K_DCU_GBL_IFS_MISC_AIFS_CNT_RST 0x00800000 /* AIFS cnt reset policy (?) */ 810 #define AR5K_DCU_GBL_IFS_MISC_RND_LFSR_SL_DIS 0x01000000 /* Disable random LFSR slice */ 811 812 /* 813 * DCU frame prefetch control register 814 */ 815 #define AR5K_DCU_FP 0x1230 /* Register Address */ 816 #define AR5K_DCU_FP_NOBURST_DCU_EN 0x00000001 /* Enable non-burst prefetch on DCU (?) */ 817 #define AR5K_DCU_FP_NOBURST_EN 0x00000010 /* Enable non-burst prefetch (?) */ 818 #define AR5K_DCU_FP_BURST_DCU_EN 0x00000020 /* Enable burst prefetch on DCU (?) */ 819 820 /* 821 * DCU transmit pause control/status register 822 */ 823 #define AR5K_DCU_TXP 0x1270 /* Register Address */ 824 #define AR5K_DCU_TXP_M 0x000003ff /* Tx pause mask */ 825 #define AR5K_DCU_TXP_STATUS 0x00010000 /* Tx pause status */ 826 827 /* 828 * DCU transmit filter table 0 (32 entries) 829 * each entry contains a 32bit slice of the 830 * 128bit tx filter for each DCU (4 slices per DCU) 831 */ 832 #define AR5K_DCU_TX_FILTER_0_BASE 0x1038 833 #define AR5K_DCU_TX_FILTER_0(_n) (AR5K_DCU_TX_FILTER_0_BASE + (_n * 64)) 834 835 /* 836 * DCU transmit filter table 1 (16 entries) 837 */ 838 #define AR5K_DCU_TX_FILTER_1_BASE 0x103c 839 #define AR5K_DCU_TX_FILTER_1(_n) (AR5K_DCU_TX_FILTER_1_BASE + (_n * 64)) 840 841 /* 842 * DCU clear transmit filter register 843 */ 844 #define AR5K_DCU_TX_FILTER_CLR 0x143c 845 846 /* 847 * DCU set transmit filter register 848 */ 849 #define AR5K_DCU_TX_FILTER_SET 0x147c 850 851 /* 852 * Reset control register 853 */ 854 #define AR5K_RESET_CTL 0x4000 /* Register Address */ 855 #define AR5K_RESET_CTL_PCU 0x00000001 /* Protocol Control Unit reset */ 856 #define AR5K_RESET_CTL_DMA 0x00000002 /* DMA (Rx/Tx) reset [5210] */ 857 #define AR5K_RESET_CTL_BASEBAND 0x00000002 /* Baseband reset [5211+] */ 858 #define AR5K_RESET_CTL_MAC 0x00000004 /* MAC reset (PCU+Baseband ?) [5210] */ 859 #define AR5K_RESET_CTL_PHY 0x00000008 /* PHY reset [5210] */ 860 #define AR5K_RESET_CTL_PCI 0x00000010 /* PCI Core reset (interrupts etc) */ 861 862 /* 863 * Sleep control register 864 */ 865 #define AR5K_SLEEP_CTL 0x4004 /* Register Address */ 866 #define AR5K_SLEEP_CTL_SLDUR 0x0000ffff /* Sleep duration mask */ 867 #define AR5K_SLEEP_CTL_SLDUR_S 0 868 #define AR5K_SLEEP_CTL_SLE 0x00030000 /* Sleep enable mask */ 869 #define AR5K_SLEEP_CTL_SLE_S 16 870 #define AR5K_SLEEP_CTL_SLE_WAKE 0x00000000 /* Force chip awake */ 871 #define AR5K_SLEEP_CTL_SLE_SLP 0x00010000 /* Force chip sleep */ 872 #define AR5K_SLEEP_CTL_SLE_ALLOW 0x00020000 /* Normal sleep policy */ 873 #define AR5K_SLEEP_CTL_SLE_UNITS 0x00000008 /* [5211+] */ 874 #define AR5K_SLEEP_CTL_DUR_TIM_POL 0x00040000 /* Sleep duration timing policy */ 875 #define AR5K_SLEEP_CTL_DUR_WRITE_POL 0x00080000 /* Sleep duration write policy */ 876 #define AR5K_SLEEP_CTL_SLE_POL 0x00100000 /* Sleep policy mode */ 877 878 /* 879 * Interrupt pending register 880 */ 881 #define AR5K_INTPEND 0x4008 882 #define AR5K_INTPEND_M 0x00000001 883 884 /* 885 * Sleep force register 886 */ 887 #define AR5K_SFR 0x400c 888 #define AR5K_SFR_EN 0x00000001 889 890 /* 891 * PCI configuration register 892 * TODO: Fix LED stuff 893 */ 894 #define AR5K_PCICFG 0x4010 /* Register Address */ 895 #define AR5K_PCICFG_EEAE 0x00000001 /* Eeprom access enable [5210] */ 896 #define AR5K_PCICFG_SLEEP_CLOCK_EN 0x00000002 /* Enable sleep clock */ 897 #define AR5K_PCICFG_CLKRUNEN 0x00000004 /* CLKRUN enable [5211+] */ 898 #define AR5K_PCICFG_EESIZE 0x00000018 /* Mask for EEPROM size [5211+] */ 899 #define AR5K_PCICFG_EESIZE_S 3 900 #define AR5K_PCICFG_EESIZE_4K 0 /* 4K */ 901 #define AR5K_PCICFG_EESIZE_8K 1 /* 8K */ 902 #define AR5K_PCICFG_EESIZE_16K 2 /* 16K */ 903 #define AR5K_PCICFG_EESIZE_FAIL 3 /* Failed to get size [5211+] */ 904 #define AR5K_PCICFG_LED 0x00000060 /* Led status [5211+] */ 905 #define AR5K_PCICFG_LED_NONE 0x00000000 /* Default [5211+] */ 906 #define AR5K_PCICFG_LED_PEND 0x00000020 /* Scan / Auth pending */ 907 #define AR5K_PCICFG_LED_ASSOC 0x00000040 /* Associated */ 908 #define AR5K_PCICFG_BUS_SEL 0x00000380 /* Mask for "bus select" [5211+] (?) */ 909 #define AR5K_PCICFG_CBEFIX_DIS 0x00000400 /* Disable CBE fix */ 910 #define AR5K_PCICFG_SL_INTEN 0x00000800 /* Enable interrupts when asleep */ 911 #define AR5K_PCICFG_LED_BCTL 0x00001000 /* Led blink (?) [5210] */ 912 #define AR5K_PCICFG_RETRY_FIX 0x00001000 /* Enable pci core retry fix */ 913 #define AR5K_PCICFG_SL_INPEN 0x00002000 /* Sleep even with pending interrupts*/ 914 #define AR5K_PCICFG_SPWR_DN 0x00010000 /* Mask for power status */ 915 #define AR5K_PCICFG_LEDMODE 0x000e0000 /* Ledmode [5211+] */ 916 #define AR5K_PCICFG_LEDMODE_PROP 0x00000000 /* Blink on standard traffic [5211+] */ 917 #define AR5K_PCICFG_LEDMODE_PROM 0x00020000 /* Default mode (blink on any traffic) [5211+] */ 918 #define AR5K_PCICFG_LEDMODE_PWR 0x00040000 /* Some other blinking mode (?) [5211+] */ 919 #define AR5K_PCICFG_LEDMODE_RAND 0x00060000 /* Random blinking (?) [5211+] */ 920 #define AR5K_PCICFG_LEDBLINK 0x00700000 /* Led blink rate */ 921 #define AR5K_PCICFG_LEDBLINK_S 20 922 #define AR5K_PCICFG_LEDSLOW 0x00800000 /* Slowest led blink rate [5211+] */ 923 #define AR5K_PCICFG_LEDSTATE \ 924 (AR5K_PCICFG_LED | AR5K_PCICFG_LEDMODE | \ 925 AR5K_PCICFG_LEDBLINK | AR5K_PCICFG_LEDSLOW) 926 #define AR5K_PCICFG_SLEEP_CLOCK_RATE 0x03000000 /* Sleep clock rate */ 927 #define AR5K_PCICFG_SLEEP_CLOCK_RATE_S 24 928 929 /* 930 * "General Purpose Input/Output" (GPIO) control register 931 * 932 * I'm not sure about this but after looking at the code 933 * for all chipsets here is what i got. 934 * 935 * We have 6 GPIOs (pins), each GPIO has 4 modes (2 bits) 936 * Mode 0 -> always input 937 * Mode 1 -> output when GPIODO for this GPIO is set to 0 938 * Mode 2 -> output when GPIODO for this GPIO is set to 1 939 * Mode 3 -> always output 940 * 941 * For more infos check out get_gpio/set_gpio and 942 * set_gpio_input/set_gpio_output functs. 943 * For more infos on gpio interrupt check out set_gpio_intr. 944 */ 945 #define AR5K_NUM_GPIO 6 946 947 #define AR5K_GPIOCR 0x4014 /* Register Address */ 948 #define AR5K_GPIOCR_INT_ENA 0x00008000 /* Enable GPIO interrupt */ 949 #define AR5K_GPIOCR_INT_SELL 0x00000000 /* Generate interrupt when pin is low */ 950 #define AR5K_GPIOCR_INT_SELH 0x00010000 /* Generate interrupt when pin is high */ 951 #define AR5K_GPIOCR_IN(n) (0 << ((n) * 2)) /* Mode 0 for pin n */ 952 #define AR5K_GPIOCR_OUT0(n) (1 << ((n) * 2)) /* Mode 1 for pin n */ 953 #define AR5K_GPIOCR_OUT1(n) (2 << ((n) * 2)) /* Mode 2 for pin n */ 954 #define AR5K_GPIOCR_OUT(n) (3 << ((n) * 2)) /* Mode 3 for pin n */ 955 #define AR5K_GPIOCR_INT_SEL(n) ((n) << 12) /* Interrupt for GPIO pin n */ 956 957 /* 958 * "General Purpose Input/Output" (GPIO) data output register 959 */ 960 #define AR5K_GPIODO 0x4018 961 962 /* 963 * "General Purpose Input/Output" (GPIO) data input register 964 */ 965 #define AR5K_GPIODI 0x401c 966 #define AR5K_GPIODI_M 0x0000002f 967 968 /* 969 * Silicon revision register 970 */ 971 #define AR5K_SREV 0x4020 /* Register Address */ 972 #define AR5K_SREV_REV 0x0000000f /* Mask for revision */ 973 #define AR5K_SREV_REV_S 0 974 #define AR5K_SREV_VER 0x000000ff /* Mask for version */ 975 #define AR5K_SREV_VER_S 4 976 977 /* 978 * TXE write posting register 979 */ 980 #define AR5K_TXEPOST 0x4028 981 982 /* 983 * QCU sleep mask 984 */ 985 #define AR5K_QCU_SLEEP_MASK 0x402c 986 987 /* 0x4068 is compression buffer configuration 988 * register on 5414 and pm configuration register 989 * on 5424 and newer pci-e chips. */ 990 991 /* 992 * Compression buffer configuration 993 * register (enable/disable) [5414] 994 */ 995 #define AR5K_5414_CBCFG 0x4068 996 #define AR5K_5414_CBCFG_BUF_DIS 0x10 /* Disable buffer */ 997 998 /* 999 * PCI-E Power management configuration 1000 * and status register [5424+] 1001 */ 1002 #define AR5K_PCIE_PM_CTL 0x4068 /* Register address */ 1003 /* Only 5424 */ 1004 #define AR5K_PCIE_PM_CTL_L1_WHEN_D2 0x00000001 /* enable PCIe core enter L1 1005 when d2_sleep_en is asserted */ 1006 #define AR5K_PCIE_PM_CTL_L0_L0S_CLEAR 0x00000002 /* Clear L0 and L0S counters */ 1007 #define AR5K_PCIE_PM_CTL_L0_L0S_EN 0x00000004 /* Start L0 nd L0S counters */ 1008 #define AR5K_PCIE_PM_CTL_LDRESET_EN 0x00000008 /* Enable reset when link goes 1009 down */ 1010 /* Wake On Wireless */ 1011 #define AR5K_PCIE_PM_CTL_PME_EN 0x00000010 /* PME Enable */ 1012 #define AR5K_PCIE_PM_CTL_AUX_PWR_DET 0x00000020 /* Aux power detect */ 1013 #define AR5K_PCIE_PM_CTL_PME_CLEAR 0x00000040 /* Clear PME */ 1014 #define AR5K_PCIE_PM_CTL_PSM_D0 0x00000080 1015 #define AR5K_PCIE_PM_CTL_PSM_D1 0x00000100 1016 #define AR5K_PCIE_PM_CTL_PSM_D2 0x00000200 1017 #define AR5K_PCIE_PM_CTL_PSM_D3 0x00000400 1018 1019 /* 1020 * PCI-E Workaround enable register 1021 */ 1022 #define AR5K_PCIE_WAEN 0x407c 1023 1024 /* 1025 * PCI-E Serializer/Deserializer 1026 * registers 1027 */ 1028 #define AR5K_PCIE_SERDES 0x4080 1029 #define AR5K_PCIE_SERDES_RESET 0x4084 1030 1031 /*====EEPROM REGISTERS====*/ 1032 1033 /* 1034 * EEPROM access registers 1035 * 1036 * Here we got a difference between 5210/5211-12 1037 * read data register for 5210 is at 0x6800 and 1038 * status register is at 0x6c00. There is also 1039 * no eeprom command register on 5210 and the 1040 * offsets are different. 1041 * 1042 * To read eeprom data for a specific offset: 1043 * 5210 - enable eeprom access (AR5K_PCICFG_EEAE) 1044 * read AR5K_EEPROM_BASE +(4 * offset) 1045 * check the eeprom status register 1046 * and read eeprom data register. 1047 * 1048 * 5211 - write offset to AR5K_EEPROM_BASE 1049 * 5212 write AR5K_EEPROM_CMD_READ on AR5K_EEPROM_CMD 1050 * check the eeprom status register 1051 * and read eeprom data register. 1052 * 1053 * To write eeprom data for a specific offset: 1054 * 5210 - enable eeprom access (AR5K_PCICFG_EEAE) 1055 * write data to AR5K_EEPROM_BASE +(4 * offset) 1056 * check the eeprom status register 1057 * 5211 - write AR5K_EEPROM_CMD_RESET on AR5K_EEPROM_CMD 1058 * 5212 write offset to AR5K_EEPROM_BASE 1059 * write data to data register 1060 * write AR5K_EEPROM_CMD_WRITE on AR5K_EEPROM_CMD 1061 * check the eeprom status register 1062 * 1063 * For more infos check eeprom_* functs and the ar5k.c 1064 * file posted in madwifi-devel mailing list. 1065 * http://sourceforge.net/mailarchive/message.php?msg_id=8966525 1066 * 1067 */ 1068 #define AR5K_EEPROM_BASE 0x6000 1069 1070 /* 1071 * EEPROM data register 1072 */ 1073 #define AR5K_EEPROM_DATA_5211 0x6004 1074 #define AR5K_EEPROM_DATA_5210 0x6800 1075 #define AR5K_EEPROM_DATA (ah->ah_version == AR5K_AR5210 ? \ 1076 AR5K_EEPROM_DATA_5210 : AR5K_EEPROM_DATA_5211) 1077 1078 /* 1079 * EEPROM command register 1080 */ 1081 #define AR5K_EEPROM_CMD 0x6008 /* Register Address */ 1082 #define AR5K_EEPROM_CMD_READ 0x00000001 /* EEPROM read */ 1083 #define AR5K_EEPROM_CMD_WRITE 0x00000002 /* EEPROM write */ 1084 #define AR5K_EEPROM_CMD_RESET 0x00000004 /* EEPROM reset */ 1085 1086 /* 1087 * EEPROM status register 1088 */ 1089 #define AR5K_EEPROM_STAT_5210 0x6c00 /* Register Address [5210] */ 1090 #define AR5K_EEPROM_STAT_5211 0x600c /* Register Address [5211+] */ 1091 #define AR5K_EEPROM_STATUS (ah->ah_version == AR5K_AR5210 ? \ 1092 AR5K_EEPROM_STAT_5210 : AR5K_EEPROM_STAT_5211) 1093 #define AR5K_EEPROM_STAT_RDERR 0x00000001 /* EEPROM read failed */ 1094 #define AR5K_EEPROM_STAT_RDDONE 0x00000002 /* EEPROM read successful */ 1095 #define AR5K_EEPROM_STAT_WRERR 0x00000004 /* EEPROM write failed */ 1096 #define AR5K_EEPROM_STAT_WRDONE 0x00000008 /* EEPROM write successful */ 1097 1098 /* 1099 * EEPROM config register 1100 */ 1101 #define AR5K_EEPROM_CFG 0x6010 /* Register Address */ 1102 #define AR5K_EEPROM_CFG_SIZE 0x00000003 /* Size determination override */ 1103 #define AR5K_EEPROM_CFG_SIZE_AUTO 0 1104 #define AR5K_EEPROM_CFG_SIZE_4KBIT 1 1105 #define AR5K_EEPROM_CFG_SIZE_8KBIT 2 1106 #define AR5K_EEPROM_CFG_SIZE_16KBIT 3 1107 #define AR5K_EEPROM_CFG_WR_WAIT_DIS 0x00000004 /* Disable write wait */ 1108 #define AR5K_EEPROM_CFG_CLK_RATE 0x00000018 /* Clock rate */ 1109 #define AR5K_EEPROM_CFG_CLK_RATE_S 3 1110 #define AR5K_EEPROM_CFG_CLK_RATE_156KHZ 0 1111 #define AR5K_EEPROM_CFG_CLK_RATE_312KHZ 1 1112 #define AR5K_EEPROM_CFG_CLK_RATE_625KHZ 2 1113 #define AR5K_EEPROM_CFG_PROT_KEY 0x00ffff00 /* Protection key */ 1114 #define AR5K_EEPROM_CFG_PROT_KEY_S 8 1115 #define AR5K_EEPROM_CFG_LIND_EN 0x01000000 /* Enable length indicator (?) */ 1116 1117 1118 /* 1119 * TODO: Wake On Wireless registers 1120 * Range 0x7000 - 0x7ce0 1121 */ 1122 1123 /* 1124 * Protocol Control Unit (PCU) registers 1125 */ 1126 /* 1127 * Used for checking initial register writes 1128 * during channel reset (see reset func) 1129 */ 1130 #define AR5K_PCU_MIN 0x8000 1131 #define AR5K_PCU_MAX 0x8fff 1132 1133 /* 1134 * First station id register (Lower 32 bits of MAC address) 1135 */ 1136 #define AR5K_STA_ID0 0x8000 1137 #define AR5K_STA_ID0_ARRD_L32 0xffffffff 1138 1139 /* 1140 * Second station id register (Upper 16 bits of MAC address + PCU settings) 1141 */ 1142 #define AR5K_STA_ID1 0x8004 /* Register Address */ 1143 #define AR5K_STA_ID1_ADDR_U16 0x0000ffff /* Upper 16 bits of MAC address */ 1144 #define AR5K_STA_ID1_AP 0x00010000 /* Set AP mode */ 1145 #define AR5K_STA_ID1_ADHOC 0x00020000 /* Set Ad-Hoc mode */ 1146 #define AR5K_STA_ID1_PWR_SV 0x00040000 /* Power save reporting */ 1147 #define AR5K_STA_ID1_NO_KEYSRCH 0x00080000 /* No key search */ 1148 #define AR5K_STA_ID1_NO_PSPOLL 0x00100000 /* No power save polling [5210] */ 1149 #define AR5K_STA_ID1_PCF_5211 0x00100000 /* Enable PCF on [5211+] */ 1150 #define AR5K_STA_ID1_PCF_5210 0x00200000 /* Enable PCF on [5210]*/ 1151 #define AR5K_STA_ID1_PCF (ah->ah_version == AR5K_AR5210 ? \ 1152 AR5K_STA_ID1_PCF_5210 : AR5K_STA_ID1_PCF_5211) 1153 #define AR5K_STA_ID1_DEFAULT_ANTENNA 0x00200000 /* Use default antenna */ 1154 #define AR5K_STA_ID1_DESC_ANTENNA 0x00400000 /* Update antenna from descriptor */ 1155 #define AR5K_STA_ID1_RTS_DEF_ANTENNA 0x00800000 /* Use default antenna for RTS */ 1156 #define AR5K_STA_ID1_ACKCTS_6MB 0x01000000 /* Rate to use for ACK/CTS. 0: highest mandatory rate <= RX rate; 1: 1Mbps in B mode */ 1157 #define AR5K_STA_ID1_BASE_RATE_11B 0x02000000 /* 802.11b base rate. 0: 1, 2, 5.5 and 11Mbps; 1: 1 and 2Mbps. [5211+] */ 1158 #define AR5K_STA_ID1_SELFGEN_DEF_ANT 0x04000000 /* Use def. antenna for self generated frames */ 1159 #define AR5K_STA_ID1_CRYPT_MIC_EN 0x08000000 /* Enable MIC */ 1160 #define AR5K_STA_ID1_KEYSRCH_MODE 0x10000000 /* Look up key when key id != 0 */ 1161 #define AR5K_STA_ID1_PRESERVE_SEQ_NUM 0x20000000 /* Preserve sequence number */ 1162 #define AR5K_STA_ID1_CBCIV_ENDIAN 0x40000000 /* ??? */ 1163 #define AR5K_STA_ID1_KEYSRCH_MCAST 0x80000000 /* Do key cache search for mcast frames */ 1164 1165 #define AR5K_STA_ID1_ANTENNA_SETTINGS (AR5K_STA_ID1_DEFAULT_ANTENNA | \ 1166 AR5K_STA_ID1_DESC_ANTENNA | \ 1167 AR5K_STA_ID1_RTS_DEF_ANTENNA | \ 1168 AR5K_STA_ID1_SELFGEN_DEF_ANT) 1169 1170 /* 1171 * First BSSID register (MAC address, lower 32bits) 1172 */ 1173 #define AR5K_BSS_ID0 0x8008 1174 1175 /* 1176 * Second BSSID register (MAC address in upper 16 bits) 1177 * 1178 * AID: Association ID 1179 */ 1180 #define AR5K_BSS_ID1 0x800c 1181 #define AR5K_BSS_ID1_AID 0xffff0000 1182 #define AR5K_BSS_ID1_AID_S 16 1183 1184 /* 1185 * Backoff slot time register 1186 */ 1187 #define AR5K_SLOT_TIME 0x8010 1188 1189 /* 1190 * ACK/CTS timeout register 1191 */ 1192 #define AR5K_TIME_OUT 0x8014 /* Register Address */ 1193 #define AR5K_TIME_OUT_ACK 0x00001fff /* ACK timeout mask */ 1194 #define AR5K_TIME_OUT_ACK_S 0 1195 #define AR5K_TIME_OUT_CTS 0x1fff0000 /* CTS timeout mask */ 1196 #define AR5K_TIME_OUT_CTS_S 16 1197 1198 /* 1199 * RSSI threshold register 1200 */ 1201 #define AR5K_RSSI_THR 0x8018 /* Register Address */ 1202 #define AR5K_RSSI_THR_M 0x000000ff /* Mask for RSSI threshold [5211+] */ 1203 #define AR5K_RSSI_THR_BMISS_5210 0x00000700 /* Mask for Beacon Missed threshold [5210] */ 1204 #define AR5K_RSSI_THR_BMISS_5210_S 8 1205 #define AR5K_RSSI_THR_BMISS_5211 0x0000ff00 /* Mask for Beacon Missed threshold [5211+] */ 1206 #define AR5K_RSSI_THR_BMISS_5211_S 8 1207 #define AR5K_RSSI_THR_BMISS (ah->ah_version == AR5K_AR5210 ? \ 1208 AR5K_RSSI_THR_BMISS_5210 : AR5K_RSSI_THR_BMISS_5211) 1209 #define AR5K_RSSI_THR_BMISS_S 8 1210 1211 /* 1212 * 5210 has more PCU registers because there is no QCU/DCU 1213 * so queue parameters are set here, this way a lot common 1214 * registers have different address for 5210. To make things 1215 * easier we define a macro based on ah->ah_version for common 1216 * registers with different addresses and common flags. 1217 */ 1218 1219 /* 1220 * Retry limit register 1221 * 1222 * Retry limit register for 5210 (no QCU/DCU so it's done in PCU) 1223 */ 1224 #define AR5K_NODCU_RETRY_LMT 0x801c /* Register Address */ 1225 #define AR5K_NODCU_RETRY_LMT_SH_RETRY 0x0000000f /* Short retry limit mask */ 1226 #define AR5K_NODCU_RETRY_LMT_SH_RETRY_S 0 1227 #define AR5K_NODCU_RETRY_LMT_LG_RETRY 0x000000f0 /* Long retry mask */ 1228 #define AR5K_NODCU_RETRY_LMT_LG_RETRY_S 4 1229 #define AR5K_NODCU_RETRY_LMT_SSH_RETRY 0x00003f00 /* Station short retry limit mask */ 1230 #define AR5K_NODCU_RETRY_LMT_SSH_RETRY_S 8 1231 #define AR5K_NODCU_RETRY_LMT_SLG_RETRY 0x000fc000 /* Station long retry limit mask */ 1232 #define AR5K_NODCU_RETRY_LMT_SLG_RETRY_S 14 1233 #define AR5K_NODCU_RETRY_LMT_CW_MIN 0x3ff00000 /* Minimum contention window mask */ 1234 #define AR5K_NODCU_RETRY_LMT_CW_MIN_S 20 1235 1236 /* 1237 * Transmit latency register 1238 */ 1239 #define AR5K_USEC_5210 0x8020 /* Register Address [5210] */ 1240 #define AR5K_USEC_5211 0x801c /* Register Address [5211+] */ 1241 #define AR5K_USEC (ah->ah_version == AR5K_AR5210 ? \ 1242 AR5K_USEC_5210 : AR5K_USEC_5211) 1243 #define AR5K_USEC_1 0x0000007f /* clock cycles for 1us */ 1244 #define AR5K_USEC_1_S 0 1245 #define AR5K_USEC_32 0x00003f80 /* clock cycles for 1us while on 32MHz clock */ 1246 #define AR5K_USEC_32_S 7 1247 #define AR5K_USEC_TX_LATENCY_5211 0x007fc000 1248 #define AR5K_USEC_TX_LATENCY_5211_S 14 1249 #define AR5K_USEC_RX_LATENCY_5211 0x1f800000 1250 #define AR5K_USEC_RX_LATENCY_5211_S 23 1251 #define AR5K_USEC_TX_LATENCY_5210 0x000fc000 /* also for 5311 */ 1252 #define AR5K_USEC_TX_LATENCY_5210_S 14 1253 #define AR5K_USEC_RX_LATENCY_5210 0x03f00000 /* also for 5311 */ 1254 #define AR5K_USEC_RX_LATENCY_5210_S 20 1255 1256 /* 1257 * PCU beacon control register 1258 */ 1259 #define AR5K_BEACON_5210 0x8024 /*Register Address [5210] */ 1260 #define AR5K_BEACON_5211 0x8020 /*Register Address [5211+] */ 1261 #define AR5K_BEACON (ah->ah_version == AR5K_AR5210 ? \ 1262 AR5K_BEACON_5210 : AR5K_BEACON_5211) 1263 #define AR5K_BEACON_PERIOD 0x0000ffff /* Mask for beacon period */ 1264 #define AR5K_BEACON_PERIOD_S 0 1265 #define AR5K_BEACON_TIM 0x007f0000 /* Mask for TIM offset */ 1266 #define AR5K_BEACON_TIM_S 16 1267 #define AR5K_BEACON_ENABLE 0x00800000 /* Enable beacons */ 1268 #define AR5K_BEACON_RESET_TSF 0x01000000 /* Force TSF reset */ 1269 1270 /* 1271 * CFP period register 1272 */ 1273 #define AR5K_CFP_PERIOD_5210 0x8028 1274 #define AR5K_CFP_PERIOD_5211 0x8024 1275 #define AR5K_CFP_PERIOD (ah->ah_version == AR5K_AR5210 ? \ 1276 AR5K_CFP_PERIOD_5210 : AR5K_CFP_PERIOD_5211) 1277 1278 /* 1279 * Next beacon time register 1280 */ 1281 #define AR5K_TIMER0_5210 0x802c 1282 #define AR5K_TIMER0_5211 0x8028 1283 #define AR5K_TIMER0 (ah->ah_version == AR5K_AR5210 ? \ 1284 AR5K_TIMER0_5210 : AR5K_TIMER0_5211) 1285 1286 /* 1287 * Next DMA beacon alert register 1288 */ 1289 #define AR5K_TIMER1_5210 0x8030 1290 #define AR5K_TIMER1_5211 0x802c 1291 #define AR5K_TIMER1 (ah->ah_version == AR5K_AR5210 ? \ 1292 AR5K_TIMER1_5210 : AR5K_TIMER1_5211) 1293 1294 /* 1295 * Next software beacon alert register 1296 */ 1297 #define AR5K_TIMER2_5210 0x8034 1298 #define AR5K_TIMER2_5211 0x8030 1299 #define AR5K_TIMER2 (ah->ah_version == AR5K_AR5210 ? \ 1300 AR5K_TIMER2_5210 : AR5K_TIMER2_5211) 1301 1302 /* 1303 * Next ATIM window time register 1304 */ 1305 #define AR5K_TIMER3_5210 0x8038 1306 #define AR5K_TIMER3_5211 0x8034 1307 #define AR5K_TIMER3 (ah->ah_version == AR5K_AR5210 ? \ 1308 AR5K_TIMER3_5210 : AR5K_TIMER3_5211) 1309 1310 1311 /* 1312 * 5210 First inter frame spacing register (IFS) 1313 */ 1314 #define AR5K_IFS0 0x8040 1315 #define AR5K_IFS0_SIFS 0x000007ff 1316 #define AR5K_IFS0_SIFS_S 0 1317 #define AR5K_IFS0_DIFS 0x007ff800 1318 #define AR5K_IFS0_DIFS_S 11 1319 1320 /* 1321 * 5210 Second inter frame spacing register (IFS) 1322 */ 1323 #define AR5K_IFS1 0x8044 1324 #define AR5K_IFS1_PIFS 0x00000fff 1325 #define AR5K_IFS1_PIFS_S 0 1326 #define AR5K_IFS1_EIFS 0x03fff000 1327 #define AR5K_IFS1_EIFS_S 12 1328 #define AR5K_IFS1_CS_EN 0x04000000 1329 #define AR5K_IFS1_CS_EN_S 26 1330 1331 /* 1332 * CFP duration register 1333 */ 1334 #define AR5K_CFP_DUR_5210 0x8048 1335 #define AR5K_CFP_DUR_5211 0x8038 1336 #define AR5K_CFP_DUR (ah->ah_version == AR5K_AR5210 ? \ 1337 AR5K_CFP_DUR_5210 : AR5K_CFP_DUR_5211) 1338 1339 /* 1340 * Receive filter register 1341 */ 1342 #define AR5K_RX_FILTER_5210 0x804c /* Register Address [5210] */ 1343 #define AR5K_RX_FILTER_5211 0x803c /* Register Address [5211+] */ 1344 #define AR5K_RX_FILTER (ah->ah_version == AR5K_AR5210 ? \ 1345 AR5K_RX_FILTER_5210 : AR5K_RX_FILTER_5211) 1346 #define AR5K_RX_FILTER_UCAST 0x00000001 /* Don't filter unicast frames */ 1347 #define AR5K_RX_FILTER_MCAST 0x00000002 /* Don't filter multicast frames */ 1348 #define AR5K_RX_FILTER_BCAST 0x00000004 /* Don't filter broadcast frames */ 1349 #define AR5K_RX_FILTER_CONTROL 0x00000008 /* Don't filter control frames */ 1350 #define AR5K_RX_FILTER_BEACON 0x00000010 /* Don't filter beacon frames */ 1351 #define AR5K_RX_FILTER_PROM 0x00000020 /* Set promiscuous mode */ 1352 #define AR5K_RX_FILTER_XRPOLL 0x00000040 /* Don't filter XR poll frame [5212+] */ 1353 #define AR5K_RX_FILTER_PROBEREQ 0x00000080 /* Don't filter probe requests [5212+] */ 1354 #define AR5K_RX_FILTER_PHYERR_5212 0x00000100 /* Don't filter phy errors [5212+] */ 1355 #define AR5K_RX_FILTER_RADARERR_5212 0x00000200 /* Don't filter phy radar errors [5212+] */ 1356 #define AR5K_RX_FILTER_PHYERR_5211 0x00000040 /* [5211] */ 1357 #define AR5K_RX_FILTER_RADARERR_5211 0x00000080 /* [5211] */ 1358 #define AR5K_RX_FILTER_PHYERR \ 1359 ((ah->ah_version == AR5K_AR5211 ? \ 1360 AR5K_RX_FILTER_PHYERR_5211 : AR5K_RX_FILTER_PHYERR_5212)) 1361 #define AR5K_RX_FILTER_RADARERR \ 1362 ((ah->ah_version == AR5K_AR5211 ? \ 1363 AR5K_RX_FILTER_RADARERR_5211 : AR5K_RX_FILTER_RADARERR_5212)) 1364 1365 /* 1366 * Multicast filter register (lower 32 bits) 1367 */ 1368 #define AR5K_MCAST_FILTER0_5210 0x8050 1369 #define AR5K_MCAST_FILTER0_5211 0x8040 1370 #define AR5K_MCAST_FILTER0 (ah->ah_version == AR5K_AR5210 ? \ 1371 AR5K_MCAST_FILTER0_5210 : AR5K_MCAST_FILTER0_5211) 1372 1373 /* 1374 * Multicast filter register (higher 16 bits) 1375 */ 1376 #define AR5K_MCAST_FILTER1_5210 0x8054 1377 #define AR5K_MCAST_FILTER1_5211 0x8044 1378 #define AR5K_MCAST_FILTER1 (ah->ah_version == AR5K_AR5210 ? \ 1379 AR5K_MCAST_FILTER1_5210 : AR5K_MCAST_FILTER1_5211) 1380 1381 1382 /* 1383 * Transmit mask register (lower 32 bits) [5210] 1384 */ 1385 #define AR5K_TX_MASK0 0x8058 1386 1387 /* 1388 * Transmit mask register (higher 16 bits) [5210] 1389 */ 1390 #define AR5K_TX_MASK1 0x805c 1391 1392 /* 1393 * Clear transmit mask [5210] 1394 */ 1395 #define AR5K_CLR_TMASK 0x8060 1396 1397 /* 1398 * Trigger level register (before transmission) [5210] 1399 */ 1400 #define AR5K_TRIG_LVL 0x8064 1401 1402 1403 /* 1404 * PCU Diagnostic register 1405 * 1406 * Used for tweaking/diagnostics. 1407 */ 1408 #define AR5K_DIAG_SW_5210 0x8068 /* Register Address [5210] */ 1409 #define AR5K_DIAG_SW_5211 0x8048 /* Register Address [5211+] */ 1410 #define AR5K_DIAG_SW (ah->ah_version == AR5K_AR5210 ? \ 1411 AR5K_DIAG_SW_5210 : AR5K_DIAG_SW_5211) 1412 #define AR5K_DIAG_SW_DIS_WEP_ACK 0x00000001 /* Disable ACKs if WEP key is invalid */ 1413 #define AR5K_DIAG_SW_DIS_ACK 0x00000002 /* Disable ACKs */ 1414 #define AR5K_DIAG_SW_DIS_CTS 0x00000004 /* Disable CTSs */ 1415 #define AR5K_DIAG_SW_DIS_ENC 0x00000008 /* Disable HW encryption */ 1416 #define AR5K_DIAG_SW_DIS_DEC 0x00000010 /* Disable HW decryption */ 1417 #define AR5K_DIAG_SW_DIS_TX_5210 0x00000020 /* Disable transmit [5210] */ 1418 #define AR5K_DIAG_SW_DIS_RX_5210 0x00000040 /* Disable receive */ 1419 #define AR5K_DIAG_SW_DIS_RX_5211 0x00000020 1420 #define AR5K_DIAG_SW_DIS_RX (ah->ah_version == AR5K_AR5210 ? \ 1421 AR5K_DIAG_SW_DIS_RX_5210 : AR5K_DIAG_SW_DIS_RX_5211) 1422 #define AR5K_DIAG_SW_LOOP_BACK_5210 0x00000080 /* TX Data Loopback (i guess it goes with DIS_TX) [5210] */ 1423 #define AR5K_DIAG_SW_LOOP_BACK_5211 0x00000040 1424 #define AR5K_DIAG_SW_LOOP_BACK (ah->ah_version == AR5K_AR5210 ? \ 1425 AR5K_DIAG_SW_LOOP_BACK_5210 : AR5K_DIAG_SW_LOOP_BACK_5211) 1426 #define AR5K_DIAG_SW_CORR_FCS_5210 0x00000100 /* Generate invalid TX FCS */ 1427 #define AR5K_DIAG_SW_CORR_FCS_5211 0x00000080 1428 #define AR5K_DIAG_SW_CORR_FCS (ah->ah_version == AR5K_AR5210 ? \ 1429 AR5K_DIAG_SW_CORR_FCS_5210 : AR5K_DIAG_SW_CORR_FCS_5211) 1430 #define AR5K_DIAG_SW_CHAN_INFO_5210 0x00000200 /* Add 56 bytes of channel info before the frame data in the RX buffer */ 1431 #define AR5K_DIAG_SW_CHAN_INFO_5211 0x00000100 1432 #define AR5K_DIAG_SW_CHAN_INFO (ah->ah_version == AR5K_AR5210 ? \ 1433 AR5K_DIAG_SW_CHAN_INFO_5210 : AR5K_DIAG_SW_CHAN_INFO_5211) 1434 #define AR5K_DIAG_SW_EN_SCRAM_SEED_5210 0x00000400 /* Enable fixed scrambler seed */ 1435 #define AR5K_DIAG_SW_EN_SCRAM_SEED_5211 0x00000200 1436 #define AR5K_DIAG_SW_EN_SCRAM_SEED (ah->ah_version == AR5K_AR5210 ? \ 1437 AR5K_DIAG_SW_EN_SCRAM_SEED_5210 : AR5K_DIAG_SW_EN_SCRAM_SEED_5211) 1438 #define AR5K_DIAG_SW_ECO_ENABLE 0x00000400 /* [5211+] */ 1439 #define AR5K_DIAG_SW_SCVRAM_SEED 0x0003f800 /* [5210] */ 1440 #define AR5K_DIAG_SW_SCRAM_SEED_M 0x0001fc00 /* Scrambler seed mask */ 1441 #define AR5K_DIAG_SW_SCRAM_SEED_S 10 1442 #define AR5K_DIAG_SW_DIS_SEQ_INC_5210 0x00040000 /* Disable seqnum increment (?)[5210] */ 1443 #define AR5K_DIAG_SW_FRAME_NV0_5210 0x00080000 1444 #define AR5K_DIAG_SW_FRAME_NV0_5211 0x00020000 /* Accept frames of non-zero protocol number */ 1445 #define AR5K_DIAG_SW_FRAME_NV0 (ah->ah_version == AR5K_AR5210 ? \ 1446 AR5K_DIAG_SW_FRAME_NV0_5210 : AR5K_DIAG_SW_FRAME_NV0_5211) 1447 #define AR5K_DIAG_SW_OBSPT_M 0x000c0000 /* Observation point select (?) */ 1448 #define AR5K_DIAG_SW_OBSPT_S 18 1449 #define AR5K_DIAG_SW_RX_CLEAR_HIGH 0x00100000 /* Ignore carrier sense */ 1450 #define AR5K_DIAG_SW_IGNORE_CARR_SENSE 0x00200000 /* Ignore virtual carrier sense */ 1451 #define AR5K_DIAG_SW_CHANNEL_IDLE_HIGH 0x00400000 /* Force channel idle high */ 1452 #define AR5K_DIAG_SW_PHEAR_ME 0x00800000 /* ??? */ 1453 1454 /* 1455 * TSF (clock) register (lower 32 bits) 1456 */ 1457 #define AR5K_TSF_L32_5210 0x806c 1458 #define AR5K_TSF_L32_5211 0x804c 1459 #define AR5K_TSF_L32 (ah->ah_version == AR5K_AR5210 ? \ 1460 AR5K_TSF_L32_5210 : AR5K_TSF_L32_5211) 1461 1462 /* 1463 * TSF (clock) register (higher 32 bits) 1464 */ 1465 #define AR5K_TSF_U32_5210 0x8070 1466 #define AR5K_TSF_U32_5211 0x8050 1467 #define AR5K_TSF_U32 (ah->ah_version == AR5K_AR5210 ? \ 1468 AR5K_TSF_U32_5210 : AR5K_TSF_U32_5211) 1469 1470 /* 1471 * Last beacon timestamp register (Read Only) 1472 */ 1473 #define AR5K_LAST_TSTP 0x8080 1474 1475 /* 1476 * ADDAC test register [5211+] 1477 */ 1478 #define AR5K_ADDAC_TEST 0x8054 /* Register Address */ 1479 #define AR5K_ADDAC_TEST_TXCONT 0x00000001 /* Test continuous tx */ 1480 #define AR5K_ADDAC_TEST_TST_MODE 0x00000002 /* Test mode */ 1481 #define AR5K_ADDAC_TEST_LOOP_EN 0x00000004 /* Enable loop */ 1482 #define AR5K_ADDAC_TEST_LOOP_LEN 0x00000008 /* Loop length (field) */ 1483 #define AR5K_ADDAC_TEST_USE_U8 0x00004000 /* Use upper 8 bits */ 1484 #define AR5K_ADDAC_TEST_MSB 0x00008000 /* State of MSB */ 1485 #define AR5K_ADDAC_TEST_TRIG_SEL 0x00010000 /* Trigger select */ 1486 #define AR5K_ADDAC_TEST_TRIG_PTY 0x00020000 /* Trigger polarity */ 1487 #define AR5K_ADDAC_TEST_RXCONT 0x00040000 /* Continuous capture */ 1488 #define AR5K_ADDAC_TEST_CAPTURE 0x00080000 /* Begin capture */ 1489 #define AR5K_ADDAC_TEST_TST_ARM 0x00100000 /* ARM rx buffer for capture */ 1490 1491 /* 1492 * Default antenna register [5211+] 1493 */ 1494 #define AR5K_DEFAULT_ANTENNA 0x8058 1495 1496 /* 1497 * Frame control QoS mask register (?) [5211+] 1498 * (FC_QOS_MASK) 1499 */ 1500 #define AR5K_FRAME_CTL_QOSM 0x805c 1501 1502 /* 1503 * Seq mask register (?) [5211+] 1504 */ 1505 #define AR5K_SEQ_MASK 0x8060 1506 1507 /* 1508 * Retry count register [5210] 1509 */ 1510 #define AR5K_RETRY_CNT 0x8084 /* Register Address [5210] */ 1511 #define AR5K_RETRY_CNT_SSH 0x0000003f /* Station short retry count (?) */ 1512 #define AR5K_RETRY_CNT_SLG 0x00000fc0 /* Station long retry count (?) */ 1513 1514 /* 1515 * Back-off status register [5210] 1516 */ 1517 #define AR5K_BACKOFF 0x8088 /* Register Address [5210] */ 1518 #define AR5K_BACKOFF_CW 0x000003ff /* Backoff Contention Window (?) */ 1519 #define AR5K_BACKOFF_CNT 0x03ff0000 /* Backoff count (?) */ 1520 1521 1522 1523 /* 1524 * NAV register (current) 1525 */ 1526 #define AR5K_NAV_5210 0x808c 1527 #define AR5K_NAV_5211 0x8084 1528 #define AR5K_NAV (ah->ah_version == AR5K_AR5210 ? \ 1529 AR5K_NAV_5210 : AR5K_NAV_5211) 1530 1531 /* 1532 * MIB counters: 1533 * 1534 * max value is 0xc000, if this is reached we get a MIB interrupt. 1535 * they can be controlled via AR5K_MIBC and are cleared on read. 1536 */ 1537 1538 /* 1539 * RTS success (MIB counter) 1540 */ 1541 #define AR5K_RTS_OK_5210 0x8090 1542 #define AR5K_RTS_OK_5211 0x8088 1543 #define AR5K_RTS_OK (ah->ah_version == AR5K_AR5210 ? \ 1544 AR5K_RTS_OK_5210 : AR5K_RTS_OK_5211) 1545 1546 /* 1547 * RTS failure (MIB counter) 1548 */ 1549 #define AR5K_RTS_FAIL_5210 0x8094 1550 #define AR5K_RTS_FAIL_5211 0x808c 1551 #define AR5K_RTS_FAIL (ah->ah_version == AR5K_AR5210 ? \ 1552 AR5K_RTS_FAIL_5210 : AR5K_RTS_FAIL_5211) 1553 1554 /* 1555 * ACK failure (MIB counter) 1556 */ 1557 #define AR5K_ACK_FAIL_5210 0x8098 1558 #define AR5K_ACK_FAIL_5211 0x8090 1559 #define AR5K_ACK_FAIL (ah->ah_version == AR5K_AR5210 ? \ 1560 AR5K_ACK_FAIL_5210 : AR5K_ACK_FAIL_5211) 1561 1562 /* 1563 * FCS failure (MIB counter) 1564 */ 1565 #define AR5K_FCS_FAIL_5210 0x809c 1566 #define AR5K_FCS_FAIL_5211 0x8094 1567 #define AR5K_FCS_FAIL (ah->ah_version == AR5K_AR5210 ? \ 1568 AR5K_FCS_FAIL_5210 : AR5K_FCS_FAIL_5211) 1569 1570 /* 1571 * Beacon count register 1572 */ 1573 #define AR5K_BEACON_CNT_5210 0x80a0 1574 #define AR5K_BEACON_CNT_5211 0x8098 1575 #define AR5K_BEACON_CNT (ah->ah_version == AR5K_AR5210 ? \ 1576 AR5K_BEACON_CNT_5210 : AR5K_BEACON_CNT_5211) 1577 1578 1579 /*===5212 Specific PCU registers===*/ 1580 1581 /* 1582 * Transmit power control register 1583 */ 1584 #define AR5K_TPC 0x80e8 1585 #define AR5K_TPC_ACK 0x0000003f /* ack frames */ 1586 #define AR5K_TPC_ACK_S 0 1587 #define AR5K_TPC_CTS 0x00003f00 /* cts frames */ 1588 #define AR5K_TPC_CTS_S 8 1589 #define AR5K_TPC_CHIRP 0x003f0000 /* chirp frames */ 1590 #define AR5K_TPC_CHIRP_S 16 1591 #define AR5K_TPC_DOPPLER 0x0f000000 /* doppler chirp span */ 1592 #define AR5K_TPC_DOPPLER_S 24 1593 1594 /* 1595 * XR (eXtended Range) mode register 1596 */ 1597 #define AR5K_XRMODE 0x80c0 /* Register Address */ 1598 #define AR5K_XRMODE_POLL_TYPE_M 0x0000003f /* Mask for Poll type (?) */ 1599 #define AR5K_XRMODE_POLL_TYPE_S 0 1600 #define AR5K_XRMODE_POLL_SUBTYPE_M 0x0000003c /* Mask for Poll subtype (?) */ 1601 #define AR5K_XRMODE_POLL_SUBTYPE_S 2 1602 #define AR5K_XRMODE_POLL_WAIT_ALL 0x00000080 /* Wait for poll */ 1603 #define AR5K_XRMODE_SIFS_DELAY 0x000fff00 /* Mask for SIFS delay */ 1604 #define AR5K_XRMODE_FRAME_HOLD_M 0xfff00000 /* Mask for frame hold (?) */ 1605 #define AR5K_XRMODE_FRAME_HOLD_S 20 1606 1607 /* 1608 * XR delay register 1609 */ 1610 #define AR5K_XRDELAY 0x80c4 /* Register Address */ 1611 #define AR5K_XRDELAY_SLOT_DELAY_M 0x0000ffff /* Mask for slot delay */ 1612 #define AR5K_XRDELAY_SLOT_DELAY_S 0 1613 #define AR5K_XRDELAY_CHIRP_DELAY_M 0xffff0000 /* Mask for CHIRP data delay */ 1614 #define AR5K_XRDELAY_CHIRP_DELAY_S 16 1615 1616 /* 1617 * XR timeout register 1618 */ 1619 #define AR5K_XRTIMEOUT 0x80c8 /* Register Address */ 1620 #define AR5K_XRTIMEOUT_CHIRP_M 0x0000ffff /* Mask for CHIRP timeout */ 1621 #define AR5K_XRTIMEOUT_CHIRP_S 0 1622 #define AR5K_XRTIMEOUT_POLL_M 0xffff0000 /* Mask for Poll timeout */ 1623 #define AR5K_XRTIMEOUT_POLL_S 16 1624 1625 /* 1626 * XR chirp register 1627 */ 1628 #define AR5K_XRCHIRP 0x80cc /* Register Address */ 1629 #define AR5K_XRCHIRP_SEND 0x00000001 /* Send CHIRP */ 1630 #define AR5K_XRCHIRP_GAP 0xffff0000 /* Mask for CHIRP gap (?) */ 1631 1632 /* 1633 * XR stomp register 1634 */ 1635 #define AR5K_XRSTOMP 0x80d0 /* Register Address */ 1636 #define AR5K_XRSTOMP_TX 0x00000001 /* Stomp Tx (?) */ 1637 #define AR5K_XRSTOMP_RX 0x00000002 /* Stomp Rx (?) */ 1638 #define AR5K_XRSTOMP_TX_RSSI 0x00000004 /* Stomp Tx RSSI (?) */ 1639 #define AR5K_XRSTOMP_TX_BSSID 0x00000008 /* Stomp Tx BSSID (?) */ 1640 #define AR5K_XRSTOMP_DATA 0x00000010 /* Stomp data (?)*/ 1641 #define AR5K_XRSTOMP_RSSI_THRES 0x0000ff00 /* Mask for XR RSSI threshold */ 1642 1643 /* 1644 * First enhanced sleep register 1645 */ 1646 #define AR5K_SLEEP0 0x80d4 /* Register Address */ 1647 #define AR5K_SLEEP0_NEXT_DTIM 0x0007ffff /* Mask for next DTIM (?) */ 1648 #define AR5K_SLEEP0_NEXT_DTIM_S 0 1649 #define AR5K_SLEEP0_ASSUME_DTIM 0x00080000 /* Assume DTIM */ 1650 #define AR5K_SLEEP0_ENH_SLEEP_EN 0x00100000 /* Enable enhanced sleep control */ 1651 #define AR5K_SLEEP0_CABTO 0xff000000 /* Mask for CAB Time Out */ 1652 #define AR5K_SLEEP0_CABTO_S 24 1653 1654 /* 1655 * Second enhanced sleep register 1656 */ 1657 #define AR5K_SLEEP1 0x80d8 /* Register Address */ 1658 #define AR5K_SLEEP1_NEXT_TIM 0x0007ffff /* Mask for next TIM (?) */ 1659 #define AR5K_SLEEP1_NEXT_TIM_S 0 1660 #define AR5K_SLEEP1_BEACON_TO 0xff000000 /* Mask for Beacon Time Out */ 1661 #define AR5K_SLEEP1_BEACON_TO_S 24 1662 1663 /* 1664 * Third enhanced sleep register 1665 */ 1666 #define AR5K_SLEEP2 0x80dc /* Register Address */ 1667 #define AR5K_SLEEP2_TIM_PER 0x0000ffff /* Mask for TIM period (?) */ 1668 #define AR5K_SLEEP2_TIM_PER_S 0 1669 #define AR5K_SLEEP2_DTIM_PER 0xffff0000 /* Mask for DTIM period (?) */ 1670 #define AR5K_SLEEP2_DTIM_PER_S 16 1671 1672 /* 1673 * TX power control (TPC) register 1674 * 1675 * XXX: PCDAC steps (0.5dBm) or dBm ? 1676 * 1677 */ 1678 #define AR5K_TXPC 0x80e8 /* Register Address */ 1679 #define AR5K_TXPC_ACK_M 0x0000003f /* ACK tx power */ 1680 #define AR5K_TXPC_ACK_S 0 1681 #define AR5K_TXPC_CTS_M 0x00003f00 /* CTS tx power */ 1682 #define AR5K_TXPC_CTS_S 8 1683 #define AR5K_TXPC_CHIRP_M 0x003f0000 /* CHIRP tx power */ 1684 #define AR5K_TXPC_CHIRP_S 16 1685 #define AR5K_TXPC_DOPPLER 0x0f000000 /* Doppler chirp span (?) */ 1686 #define AR5K_TXPC_DOPPLER_S 24 1687 1688 /* 1689 * Profile count registers 1690 * 1691 * These registers can be cleared and frozen with ATH5K_MIBC, but they do not 1692 * generate a MIB interrupt. 1693 * Instead of overflowing, they shift by one bit to the right. All registers 1694 * shift together, i.e. when one reaches the max, all shift at the same time by 1695 * one bit to the right. This way we should always get consistent values. 1696 */ 1697 #define AR5K_PROFCNT_TX 0x80ec /* Tx count */ 1698 #define AR5K_PROFCNT_RX 0x80f0 /* Rx count */ 1699 #define AR5K_PROFCNT_RXCLR 0x80f4 /* Busy count */ 1700 #define AR5K_PROFCNT_CYCLE 0x80f8 /* Cycle counter */ 1701 1702 /* 1703 * Quiet period control registers 1704 */ 1705 #define AR5K_QUIET_CTL1 0x80fc /* Register Address */ 1706 #define AR5K_QUIET_CTL1_NEXT_QT_TSF 0x0000ffff /* Next quiet period TSF (TU) */ 1707 #define AR5K_QUIET_CTL1_NEXT_QT_TSF_S 0 1708 #define AR5K_QUIET_CTL1_QT_EN 0x00010000 /* Enable quiet period */ 1709 #define AR5K_QUIET_CTL1_ACK_CTS_EN 0x00020000 /* Send ACK/CTS during quiet period */ 1710 1711 #define AR5K_QUIET_CTL2 0x8100 /* Register Address */ 1712 #define AR5K_QUIET_CTL2_QT_PER 0x0000ffff /* Mask for quiet period periodicity */ 1713 #define AR5K_QUIET_CTL2_QT_PER_S 0 1714 #define AR5K_QUIET_CTL2_QT_DUR 0xffff0000 /* Mask for quiet period duration */ 1715 #define AR5K_QUIET_CTL2_QT_DUR_S 16 1716 1717 /* 1718 * TSF parameter register 1719 */ 1720 #define AR5K_TSF_PARM 0x8104 /* Register Address */ 1721 #define AR5K_TSF_PARM_INC 0x000000ff /* Mask for TSF increment */ 1722 #define AR5K_TSF_PARM_INC_S 0 1723 1724 /* 1725 * QoS NOACK policy 1726 */ 1727 #define AR5K_QOS_NOACK 0x8108 /* Register Address */ 1728 #define AR5K_QOS_NOACK_2BIT_VALUES 0x0000000f /* ??? */ 1729 #define AR5K_QOS_NOACK_2BIT_VALUES_S 0 1730 #define AR5K_QOS_NOACK_BIT_OFFSET 0x00000070 /* ??? */ 1731 #define AR5K_QOS_NOACK_BIT_OFFSET_S 4 1732 #define AR5K_QOS_NOACK_BYTE_OFFSET 0x00000180 /* ??? */ 1733 #define AR5K_QOS_NOACK_BYTE_OFFSET_S 7 1734 1735 /* 1736 * PHY error filter register 1737 */ 1738 #define AR5K_PHY_ERR_FIL 0x810c 1739 #define AR5K_PHY_ERR_FIL_RADAR 0x00000020 /* Radar signal */ 1740 #define AR5K_PHY_ERR_FIL_OFDM 0x00020000 /* OFDM false detect (ANI) */ 1741 #define AR5K_PHY_ERR_FIL_CCK 0x02000000 /* CCK false detect (ANI) */ 1742 1743 /* 1744 * XR latency register 1745 */ 1746 #define AR5K_XRLAT_TX 0x8110 1747 1748 /* 1749 * ACK SIFS register 1750 */ 1751 #define AR5K_ACKSIFS 0x8114 /* Register Address */ 1752 #define AR5K_ACKSIFS_INC 0x00000000 /* ACK SIFS Increment (field) */ 1753 1754 /* 1755 * MIC QoS control register (?) 1756 */ 1757 #define AR5K_MIC_QOS_CTL 0x8118 /* Register Address */ 1758 #define AR5K_MIC_QOS_CTL_OFF(_n) (1 << (_n * 2)) 1759 #define AR5K_MIC_QOS_CTL_MQ_EN 0x00010000 /* Enable MIC QoS */ 1760 1761 /* 1762 * MIC QoS select register (?) 1763 */ 1764 #define AR5K_MIC_QOS_SEL 0x811c 1765 #define AR5K_MIC_QOS_SEL_OFF(_n) (1 << (_n * 4)) 1766 1767 /* 1768 * Misc mode control register (?) 1769 */ 1770 #define AR5K_MISC_MODE 0x8120 /* Register Address */ 1771 #define AR5K_MISC_MODE_FBSSID_MATCH 0x00000001 /* Force BSSID match */ 1772 #define AR5K_MISC_MODE_ACKSIFS_MEM 0x00000002 /* ACK SIFS memory (?) */ 1773 #define AR5K_MISC_MODE_COMBINED_MIC 0x00000004 /* use rx/tx MIC key */ 1774 /* more bits */ 1775 1776 /* 1777 * OFDM Filter counter 1778 */ 1779 #define AR5K_OFDM_FIL_CNT 0x8124 1780 1781 /* 1782 * CCK Filter counter 1783 */ 1784 #define AR5K_CCK_FIL_CNT 0x8128 1785 1786 /* 1787 * PHY Error Counters (same masks as AR5K_PHY_ERR_FIL) 1788 */ 1789 #define AR5K_PHYERR_CNT1 0x812c 1790 #define AR5K_PHYERR_CNT1_MASK 0x8130 1791 1792 #define AR5K_PHYERR_CNT2 0x8134 1793 #define AR5K_PHYERR_CNT2_MASK 0x8138 1794 1795 /* if the PHY Error Counters reach this maximum, we get MIB interrupts */ 1796 #define ATH5K_PHYERR_CNT_MAX 0x00c00000 1797 1798 /* 1799 * TSF Threshold register (?) 1800 */ 1801 #define AR5K_TSF_THRES 0x813c 1802 1803 /* 1804 * TODO: Wake On Wireless registers 1805 * Range: 0x8147 - 0x818c 1806 */ 1807 1808 /* 1809 * Rate -> ACK SIFS mapping table (32 entries) 1810 */ 1811 #define AR5K_RATE_ACKSIFS_BASE 0x8680 /* Register Address */ 1812 #define AR5K_RATE_ACKSIFS(_n) (AR5K_RATE_ACKSIFS_BSE + ((_n) << 2)) 1813 #define AR5K_RATE_ACKSIFS_NORMAL 0x00000001 /* Normal SIFS (field) */ 1814 #define AR5K_RATE_ACKSIFS_TURBO 0x00000400 /* Turbo SIFS (field) */ 1815 1816 /* 1817 * Rate -> duration mapping table (32 entries) 1818 */ 1819 #define AR5K_RATE_DUR_BASE 0x8700 1820 #define AR5K_RATE_DUR(_n) (AR5K_RATE_DUR_BASE + ((_n) << 2)) 1821 1822 /* 1823 * Rate -> db mapping table 1824 * (8 entries, each one has 4 8bit fields) 1825 */ 1826 #define AR5K_RATE2DB_BASE 0x87c0 1827 #define AR5K_RATE2DB(_n) (AR5K_RATE2DB_BASE + ((_n) << 2)) 1828 1829 /* 1830 * db -> Rate mapping table 1831 * (8 entries, each one has 4 8bit fields) 1832 */ 1833 #define AR5K_DB2RATE_BASE 0x87e0 1834 #define AR5K_DB2RATE(_n) (AR5K_DB2RATE_BASE + ((_n) << 2)) 1835 1836 /*===5212 end===*/ 1837 1838 #define AR5K_KEYTABLE_SIZE_5210 64 1839 #define AR5K_KEYTABLE_SIZE_5211 128 1840 1841 /*===PHY REGISTERS===*/ 1842 1843 /* 1844 * PHY registers start 1845 */ 1846 #define AR5K_PHY_BASE 0x9800 1847 #define AR5K_PHY(_n) (AR5K_PHY_BASE + ((_n) << 2)) 1848 1849 /* 1850 * TST_2 (Misc config parameters) 1851 */ 1852 #define AR5K_PHY_TST2 0x9800 /* Register Address */ 1853 #define AR5K_PHY_TST2_TRIG_SEL 0x00000007 /* Trigger select (?)*/ 1854 #define AR5K_PHY_TST2_TRIG 0x00000010 /* Trigger (?) */ 1855 #define AR5K_PHY_TST2_CBUS_MODE 0x00000060 /* Cardbus mode (?) */ 1856 #define AR5K_PHY_TST2_CLK32 0x00000400 /* CLK_OUT is CLK32 (32kHz external) */ 1857 #define AR5K_PHY_TST2_CHANCOR_DUMP_EN 0x00000800 /* Enable Chancor dump (?) */ 1858 #define AR5K_PHY_TST2_EVEN_CHANCOR_DUMP 0x00001000 /* Even Chancor dump (?) */ 1859 #define AR5K_PHY_TST2_RFSILENT_EN 0x00002000 /* Enable RFSILENT */ 1860 #define AR5K_PHY_TST2_ALT_RFDATA 0x00004000 /* Alternate RFDATA (5-2GHz switch ?) */ 1861 #define AR5K_PHY_TST2_MINI_OBS_EN 0x00008000 /* Enable mini OBS (?) */ 1862 #define AR5K_PHY_TST2_RX2_IS_RX5_INV 0x00010000 /* 2GHz rx path is the 5GHz path inverted (?) */ 1863 #define AR5K_PHY_TST2_SLOW_CLK160 0x00020000 /* Slow CLK160 (?) */ 1864 #define AR5K_PHY_TST2_AGC_OBS_SEL_3 0x00040000 /* AGC OBS Select 3 (?) */ 1865 #define AR5K_PHY_TST2_BBB_OBS_SEL 0x00080000 /* BB OBS Select (field ?) */ 1866 #define AR5K_PHY_TST2_ADC_OBS_SEL 0x00800000 /* ADC OBS Select (field ?) */ 1867 #define AR5K_PHY_TST2_RX_CLR_SEL 0x08000000 /* RX Clear Select (?) */ 1868 #define AR5K_PHY_TST2_FORCE_AGC_CLR 0x10000000 /* Force AGC clear (?) */ 1869 #define AR5K_PHY_SHIFT_2GHZ 0x00004007 /* Used to access 2GHz radios */ 1870 #define AR5K_PHY_SHIFT_5GHZ 0x00000007 /* Used to access 5GHz radios (default) */ 1871 1872 /* 1873 * PHY frame control register [5110] /turbo mode register [5111+] 1874 * 1875 * There is another frame control register for [5111+] 1876 * at address 0x9944 (see below) but the 2 first flags 1877 * are common here between 5110 frame control register 1878 * and [5111+] turbo mode register, so this also works as 1879 * a "turbo mode register" for 5110. We treat this one as 1880 * a frame control register for 5110 below. 1881 */ 1882 #define AR5K_PHY_TURBO 0x9804 /* Register Address */ 1883 #define AR5K_PHY_TURBO_MODE 0x00000001 /* Enable turbo mode */ 1884 #define AR5K_PHY_TURBO_SHORT 0x00000002 /* Set short symbols to turbo mode */ 1885 #define AR5K_PHY_TURBO_MIMO 0x00000004 /* Set turbo for mimo */ 1886 1887 /* 1888 * PHY agility command register 1889 * (aka TST_1) 1890 */ 1891 #define AR5K_PHY_AGC 0x9808 /* Register Address */ 1892 #define AR5K_PHY_TST1 0x9808 1893 #define AR5K_PHY_AGC_DISABLE 0x08000000 /* Disable AGC to A2 (?)*/ 1894 #define AR5K_PHY_TST1_TXHOLD 0x00003800 /* Set tx hold (?) */ 1895 #define AR5K_PHY_TST1_TXSRC_SRC 0x00000002 /* Used with bit 7 (?) */ 1896 #define AR5K_PHY_TST1_TXSRC_SRC_S 1 1897 #define AR5K_PHY_TST1_TXSRC_ALT 0x00000080 /* Set input to tsdac (?) */ 1898 #define AR5K_PHY_TST1_TXSRC_ALT_S 7 1899 1900 1901 /* 1902 * PHY timing register 3 [5112+] 1903 */ 1904 #define AR5K_PHY_TIMING_3 0x9814 1905 #define AR5K_PHY_TIMING_3_DSC_MAN 0xfffe0000 1906 #define AR5K_PHY_TIMING_3_DSC_MAN_S 17 1907 #define AR5K_PHY_TIMING_3_DSC_EXP 0x0001e000 1908 #define AR5K_PHY_TIMING_3_DSC_EXP_S 13 1909 1910 /* 1911 * PHY chip revision register 1912 */ 1913 #define AR5K_PHY_CHIP_ID 0x9818 1914 1915 /* 1916 * PHY activation register 1917 */ 1918 #define AR5K_PHY_ACT 0x981c /* Register Address */ 1919 #define AR5K_PHY_ACT_ENABLE 0x00000001 /* Activate PHY */ 1920 #define AR5K_PHY_ACT_DISABLE 0x00000002 /* Deactivate PHY */ 1921 1922 /* 1923 * PHY RF control registers 1924 */ 1925 #define AR5K_PHY_RF_CTL2 0x9824 /* Register Address */ 1926 #define AR5K_PHY_RF_CTL2_TXF2TXD_START 0x0000000f /* TX frame to TX data start */ 1927 #define AR5K_PHY_RF_CTL2_TXF2TXD_START_S 0 1928 1929 #define AR5K_PHY_RF_CTL3 0x9828 /* Register Address */ 1930 #define AR5K_PHY_RF_CTL3_TXE2XLNA_ON 0x0000ff00 /* TX end to XLNA on */ 1931 #define AR5K_PHY_RF_CTL3_TXE2XLNA_ON_S 8 1932 1933 #define AR5K_PHY_ADC_CTL 0x982c 1934 #define AR5K_PHY_ADC_CTL_INBUFGAIN_OFF 0x00000003 1935 #define AR5K_PHY_ADC_CTL_INBUFGAIN_OFF_S 0 1936 #define AR5K_PHY_ADC_CTL_PWD_DAC_OFF 0x00002000 1937 #define AR5K_PHY_ADC_CTL_PWD_BAND_GAP_OFF 0x00004000 1938 #define AR5K_PHY_ADC_CTL_PWD_ADC_OFF 0x00008000 1939 #define AR5K_PHY_ADC_CTL_INBUFGAIN_ON 0x00030000 1940 #define AR5K_PHY_ADC_CTL_INBUFGAIN_ON_S 16 1941 1942 #define AR5K_PHY_RF_CTL4 0x9834 /* Register Address */ 1943 #define AR5K_PHY_RF_CTL4_TXF2XPA_A_ON 0x00000001 /* TX frame to XPA A on (field) */ 1944 #define AR5K_PHY_RF_CTL4_TXF2XPA_B_ON 0x00000100 /* TX frame to XPA B on (field) */ 1945 #define AR5K_PHY_RF_CTL4_TXE2XPA_A_OFF 0x00010000 /* TX end to XPA A off (field) */ 1946 #define AR5K_PHY_RF_CTL4_TXE2XPA_B_OFF 0x01000000 /* TX end to XPA B off (field) */ 1947 1948 /* 1949 * Pre-Amplifier control register 1950 * (XPA -> external pre-amplifier) 1951 */ 1952 #define AR5K_PHY_PA_CTL 0x9838 /* Register Address */ 1953 #define AR5K_PHY_PA_CTL_XPA_A_HI 0x00000001 /* XPA A high (?) */ 1954 #define AR5K_PHY_PA_CTL_XPA_B_HI 0x00000002 /* XPA B high (?) */ 1955 #define AR5K_PHY_PA_CTL_XPA_A_EN 0x00000004 /* Enable XPA A */ 1956 #define AR5K_PHY_PA_CTL_XPA_B_EN 0x00000008 /* Enable XPA B */ 1957 1958 /* 1959 * PHY settling register 1960 */ 1961 #define AR5K_PHY_SETTLING 0x9844 /* Register Address */ 1962 #define AR5K_PHY_SETTLING_AGC 0x0000007f /* AGC settling time */ 1963 #define AR5K_PHY_SETTLING_AGC_S 0 1964 #define AR5K_PHY_SETTLING_SWITCH 0x00003f80 /* Switch settling time */ 1965 #define AR5K_PHY_SETTLING_SWITCH_S 7 1966 1967 /* 1968 * PHY Gain registers 1969 */ 1970 #define AR5K_PHY_GAIN 0x9848 /* Register Address */ 1971 #define AR5K_PHY_GAIN_TXRX_ATTEN 0x0003f000 /* TX-RX Attenuation */ 1972 #define AR5K_PHY_GAIN_TXRX_ATTEN_S 12 1973 #define AR5K_PHY_GAIN_TXRX_RF_MAX 0x007c0000 1974 #define AR5K_PHY_GAIN_TXRX_RF_MAX_S 18 1975 1976 #define AR5K_PHY_GAIN_OFFSET 0x984c /* Register Address */ 1977 #define AR5K_PHY_GAIN_OFFSET_RXTX_FLAG 0x00020000 /* RX-TX flag (?) */ 1978 1979 /* 1980 * Desired ADC/PGA size register 1981 * (for more infos read ANI patent) 1982 */ 1983 #define AR5K_PHY_DESIRED_SIZE 0x9850 /* Register Address */ 1984 #define AR5K_PHY_DESIRED_SIZE_ADC 0x000000ff /* ADC desired size */ 1985 #define AR5K_PHY_DESIRED_SIZE_ADC_S 0 1986 #define AR5K_PHY_DESIRED_SIZE_PGA 0x0000ff00 /* PGA desired size */ 1987 #define AR5K_PHY_DESIRED_SIZE_PGA_S 8 1988 #define AR5K_PHY_DESIRED_SIZE_TOT 0x0ff00000 /* Total desired size */ 1989 #define AR5K_PHY_DESIRED_SIZE_TOT_S 20 1990 1991 /* 1992 * PHY signal register 1993 * (for more infos read ANI patent) 1994 */ 1995 #define AR5K_PHY_SIG 0x9858 /* Register Address */ 1996 #define AR5K_PHY_SIG_FIRSTEP 0x0003f000 /* FIRSTEP */ 1997 #define AR5K_PHY_SIG_FIRSTEP_S 12 1998 #define AR5K_PHY_SIG_FIRPWR 0x03fc0000 /* FIPWR */ 1999 #define AR5K_PHY_SIG_FIRPWR_S 18 2000 2001 /* 2002 * PHY coarse agility control register 2003 * (for more infos read ANI patent) 2004 */ 2005 #define AR5K_PHY_AGCCOARSE 0x985c /* Register Address */ 2006 #define AR5K_PHY_AGCCOARSE_LO 0x00007f80 /* AGC Coarse low */ 2007 #define AR5K_PHY_AGCCOARSE_LO_S 7 2008 #define AR5K_PHY_AGCCOARSE_HI 0x003f8000 /* AGC Coarse high */ 2009 #define AR5K_PHY_AGCCOARSE_HI_S 15 2010 2011 /* 2012 * PHY agility control register 2013 */ 2014 #define AR5K_PHY_AGCCTL 0x9860 /* Register address */ 2015 #define AR5K_PHY_AGCCTL_CAL 0x00000001 /* Enable PHY calibration */ 2016 #define AR5K_PHY_AGCCTL_NF 0x00000002 /* Enable Noise Floor calibration */ 2017 #define AR5K_PHY_AGCCTL_OFDM_DIV_DIS 0x00000008 /* Disable antenna diversity on OFDM modes */ 2018 #define AR5K_PHY_AGCCTL_NF_EN 0x00008000 /* Enable nf calibration to happen (?) */ 2019 #define AR5K_PHY_AGCTL_FLTR_CAL 0x00010000 /* Allow filter calibration (?) */ 2020 #define AR5K_PHY_AGCCTL_NF_NOUPDATE 0x00020000 /* Don't update nf automatically */ 2021 2022 /* 2023 * PHY noise floor status register (CCA = Clear Channel Assessment) 2024 */ 2025 #define AR5K_PHY_NF 0x9864 /* Register address */ 2026 #define AR5K_PHY_NF_M 0x000001ff /* Noise floor, written to hardware in 1/2 dBm units */ 2027 #define AR5K_PHY_NF_SVAL(_n) (((_n) & AR5K_PHY_NF_M) | (1 << 9)) 2028 #define AR5K_PHY_NF_THRESH62 0x0007f000 /* Thresh62 -check ANI patent- (field) */ 2029 #define AR5K_PHY_NF_THRESH62_S 12 2030 #define AR5K_PHY_NF_MINCCA_PWR 0x0ff80000 /* Minimum measured noise level, read from hardware in 1 dBm units */ 2031 #define AR5K_PHY_NF_MINCCA_PWR_S 19 2032 2033 /* 2034 * PHY ADC saturation register [5110] 2035 */ 2036 #define AR5K_PHY_ADCSAT 0x9868 2037 #define AR5K_PHY_ADCSAT_ICNT 0x0001f800 2038 #define AR5K_PHY_ADCSAT_ICNT_S 11 2039 #define AR5K_PHY_ADCSAT_THR 0x000007e0 2040 #define AR5K_PHY_ADCSAT_THR_S 5 2041 2042 /* 2043 * PHY Weak ofdm signal detection threshold registers (ANI) [5212+] 2044 */ 2045 2046 /* High thresholds */ 2047 #define AR5K_PHY_WEAK_OFDM_HIGH_THR 0x9868 2048 #define AR5K_PHY_WEAK_OFDM_HIGH_THR_M2_COUNT 0x0000001f 2049 #define AR5K_PHY_WEAK_OFDM_HIGH_THR_M2_COUNT_S 0 2050 #define AR5K_PHY_WEAK_OFDM_HIGH_THR_M1 0x00fe0000 2051 #define AR5K_PHY_WEAK_OFDM_HIGH_THR_M1_S 17 2052 #define AR5K_PHY_WEAK_OFDM_HIGH_THR_M2 0x7f000000 2053 #define AR5K_PHY_WEAK_OFDM_HIGH_THR_M2_S 24 2054 2055 /* Low thresholds */ 2056 #define AR5K_PHY_WEAK_OFDM_LOW_THR 0x986c 2057 #define AR5K_PHY_WEAK_OFDM_LOW_THR_SELFCOR_EN 0x00000001 2058 #define AR5K_PHY_WEAK_OFDM_LOW_THR_M2_COUNT 0x00003f00 2059 #define AR5K_PHY_WEAK_OFDM_LOW_THR_M2_COUNT_S 8 2060 #define AR5K_PHY_WEAK_OFDM_LOW_THR_M1 0x001fc000 2061 #define AR5K_PHY_WEAK_OFDM_LOW_THR_M1_S 14 2062 #define AR5K_PHY_WEAK_OFDM_LOW_THR_M2 0x0fe00000 2063 #define AR5K_PHY_WEAK_OFDM_LOW_THR_M2_S 21 2064 2065 2066 /* 2067 * PHY sleep registers [5112+] 2068 */ 2069 #define AR5K_PHY_SCR 0x9870 2070 2071 #define AR5K_PHY_SLMT 0x9874 2072 #define AR5K_PHY_SLMT_32MHZ 0x0000007f 2073 2074 #define AR5K_PHY_SCAL 0x9878 2075 #define AR5K_PHY_SCAL_32MHZ 0x0000000e 2076 #define AR5K_PHY_SCAL_32MHZ_5311 0x00000008 2077 #define AR5K_PHY_SCAL_32MHZ_2417 0x0000000a 2078 #define AR5K_PHY_SCAL_32MHZ_HB63 0x00000032 2079 2080 /* 2081 * PHY PLL (Phase Locked Loop) control register 2082 */ 2083 #define AR5K_PHY_PLL 0x987c 2084 #define AR5K_PHY_PLL_20MHZ 0x00000013 /* For half rate (?) */ 2085 /* 40MHz -> 5GHz band */ 2086 #define AR5K_PHY_PLL_40MHZ_5211 0x00000018 2087 #define AR5K_PHY_PLL_40MHZ_5212 0x000000aa 2088 #define AR5K_PHY_PLL_40MHZ_5413 0x00000004 2089 #define AR5K_PHY_PLL_40MHZ (ah->ah_version == AR5K_AR5211 ? \ 2090 AR5K_PHY_PLL_40MHZ_5211 : AR5K_PHY_PLL_40MHZ_5212) 2091 /* 44MHz -> 2.4GHz band */ 2092 #define AR5K_PHY_PLL_44MHZ_5211 0x00000019 2093 #define AR5K_PHY_PLL_44MHZ_5212 0x000000ab 2094 #define AR5K_PHY_PLL_44MHZ (ah->ah_version == AR5K_AR5211 ? \ 2095 AR5K_PHY_PLL_44MHZ_5211 : AR5K_PHY_PLL_44MHZ_5212) 2096 2097 #define AR5K_PHY_PLL_RF5111 0x00000000 2098 #define AR5K_PHY_PLL_RF5112 0x00000040 2099 #define AR5K_PHY_PLL_HALF_RATE 0x00000100 2100 #define AR5K_PHY_PLL_QUARTER_RATE 0x00000200 2101 2102 /* 2103 * RF Buffer register 2104 * 2105 * It's obvious from the code that 0x989c is the buffer register but 2106 * for the other special registers that we write to after sending each 2107 * packet, i have no idea. So I'll name them BUFFER_CONTROL_X registers 2108 * for now. It's interesting that they are also used for some other operations. 2109 */ 2110 2111 #define AR5K_RF_BUFFER 0x989c 2112 #define AR5K_RF_BUFFER_CONTROL_0 0x98c0 /* Channel on 5110 */ 2113 #define AR5K_RF_BUFFER_CONTROL_1 0x98c4 /* Bank 7 on 5112 */ 2114 #define AR5K_RF_BUFFER_CONTROL_2 0x98cc /* Bank 7 on 5111 */ 2115 2116 #define AR5K_RF_BUFFER_CONTROL_3 0x98d0 /* Bank 2 on 5112 */ 2117 /* Channel set on 5111 */ 2118 /* Used to read radio revision*/ 2119 2120 #define AR5K_RF_BUFFER_CONTROL_4 0x98d4 /* RF Stage register on 5110 */ 2121 /* Bank 0,1,2,6 on 5111 */ 2122 /* Bank 1 on 5112 */ 2123 /* Used during activation on 5111 */ 2124 2125 #define AR5K_RF_BUFFER_CONTROL_5 0x98d8 /* Bank 3 on 5111 */ 2126 /* Used during activation on 5111 */ 2127 /* Channel on 5112 */ 2128 /* Bank 6 on 5112 */ 2129 2130 #define AR5K_RF_BUFFER_CONTROL_6 0x98dc /* Bank 3 on 5112 */ 2131 2132 /* 2133 * PHY RF stage register [5210] 2134 */ 2135 #define AR5K_PHY_RFSTG 0x98d4 2136 #define AR5K_PHY_RFSTG_DISABLE 0x00000021 2137 2138 /* 2139 * BIN masks (?) 2140 */ 2141 #define AR5K_PHY_BIN_MASK_1 0x9900 2142 #define AR5K_PHY_BIN_MASK_2 0x9904 2143 #define AR5K_PHY_BIN_MASK_3 0x9908 2144 2145 #define AR5K_PHY_BIN_MASK_CTL 0x990c 2146 #define AR5K_PHY_BIN_MASK_CTL_MASK_4 0x00003fff 2147 #define AR5K_PHY_BIN_MASK_CTL_MASK_4_S 0 2148 #define AR5K_PHY_BIN_MASK_CTL_RATE 0xff000000 2149 #define AR5K_PHY_BIN_MASK_CTL_RATE_S 24 2150 2151 /* 2152 * PHY Antenna control register 2153 */ 2154 #define AR5K_PHY_ANT_CTL 0x9910 /* Register Address */ 2155 #define AR5K_PHY_ANT_CTL_TXRX_EN 0x00000001 /* Enable TX/RX (?) */ 2156 #define AR5K_PHY_ANT_CTL_SECTORED_ANT 0x00000004 /* Sectored Antenna */ 2157 #define AR5K_PHY_ANT_CTL_HITUNE5 0x00000008 /* Hitune5 (?) */ 2158 #define AR5K_PHY_ANT_CTL_SWTABLE_IDLE 0x000003f0 /* Switch table idle (?) */ 2159 #define AR5K_PHY_ANT_CTL_SWTABLE_IDLE_S 4 2160 2161 /* 2162 * PHY receiver delay register [5111+] 2163 */ 2164 #define AR5K_PHY_RX_DELAY 0x9914 /* Register Address */ 2165 #define AR5K_PHY_RX_DELAY_M 0x00003fff /* Mask for RX activate to receive delay (/100ns) */ 2166 2167 /* 2168 * PHY max rx length register (?) [5111] 2169 */ 2170 #define AR5K_PHY_MAX_RX_LEN 0x991c 2171 2172 /* 2173 * PHY timing register 4 2174 * I(nphase)/Q(adrature) calibration register [5111+] 2175 */ 2176 #define AR5K_PHY_IQ 0x9920 /* Register Address */ 2177 #define AR5K_PHY_IQ_CORR_Q_Q_COFF 0x0000001f /* Mask for q correction info */ 2178 #define AR5K_PHY_IQ_CORR_Q_Q_COFF_S 0 2179 #define AR5K_PHY_IQ_CORR_Q_I_COFF 0x000007e0 /* Mask for i correction info */ 2180 #define AR5K_PHY_IQ_CORR_Q_I_COFF_S 5 2181 #define AR5K_PHY_IQ_CORR_ENABLE 0x00000800 /* Enable i/q correction */ 2182 #define AR5K_PHY_IQ_CAL_NUM_LOG_MAX 0x0000f000 /* Mask for max number of samples in log scale */ 2183 #define AR5K_PHY_IQ_CAL_NUM_LOG_MAX_S 12 2184 #define AR5K_PHY_IQ_RUN 0x00010000 /* Run i/q calibration */ 2185 #define AR5K_PHY_IQ_USE_PT_DF 0x00020000 /* Use pilot track df (?) */ 2186 #define AR5K_PHY_IQ_EARLY_TRIG_THR 0x00200000 /* Early trigger threshold (?) (field) */ 2187 #define AR5K_PHY_IQ_PILOT_MASK_EN 0x10000000 /* Enable pilot mask (?) */ 2188 #define AR5K_PHY_IQ_CHAN_MASK_EN 0x20000000 /* Enable channel mask (?) */ 2189 #define AR5K_PHY_IQ_SPUR_FILT_EN 0x40000000 /* Enable spur filter */ 2190 #define AR5K_PHY_IQ_SPUR_RSSI_EN 0x80000000 /* Enable spur rssi */ 2191 2192 /* 2193 * PHY timing register 5 2194 * OFDM Self-correlator Cyclic RSSI threshold params 2195 * (Check out bb_cycpwr_thr1 on ANI patent) 2196 */ 2197 #define AR5K_PHY_OFDM_SELFCORR 0x9924 /* Register Address */ 2198 #define AR5K_PHY_OFDM_SELFCORR_CYPWR_THR1_EN 0x00000001 /* Enable cyclic RSSI thr 1 */ 2199 #define AR5K_PHY_OFDM_SELFCORR_CYPWR_THR1 0x000000fe /* Mask for Cyclic RSSI threshold 1 */ 2200 #define AR5K_PHY_OFDM_SELFCORR_CYPWR_THR1_S 1 2201 #define AR5K_PHY_OFDM_SELFCORR_CYPWR_THR3 0x00000100 /* Cyclic RSSI threshold 3 (field) (?) */ 2202 #define AR5K_PHY_OFDM_SELFCORR_RSSI_1ATHR_EN 0x00008000 /* Enable 1A RSSI threshold (?) */ 2203 #define AR5K_PHY_OFDM_SELFCORR_RSSI_1ATHR 0x00010000 /* 1A RSSI threshold (field) (?) */ 2204 #define AR5K_PHY_OFDM_SELFCORR_LSCTHR_HIRSSI 0x00800000 /* Long sc threshold hi rssi (?) */ 2205 2206 /* 2207 * PHY-only warm reset register 2208 */ 2209 #define AR5K_PHY_WARM_RESET 0x9928 2210 2211 /* 2212 * PHY-only control register 2213 */ 2214 #define AR5K_PHY_CTL 0x992c /* Register Address */ 2215 #define AR5K_PHY_CTL_RX_DRAIN_RATE 0x00000001 /* RX drain rate (?) */ 2216 #define AR5K_PHY_CTL_LATE_TX_SIG_SYM 0x00000002 /* Late tx signal symbol (?) */ 2217 #define AR5K_PHY_CTL_GEN_SCRAMBLER 0x00000004 /* Generate scrambler */ 2218 #define AR5K_PHY_CTL_TX_ANT_SEL 0x00000008 /* TX antenna select */ 2219 #define AR5K_PHY_CTL_TX_ANT_STATIC 0x00000010 /* Static TX antenna */ 2220 #define AR5K_PHY_CTL_RX_ANT_SEL 0x00000020 /* RX antenna select */ 2221 #define AR5K_PHY_CTL_RX_ANT_STATIC 0x00000040 /* Static RX antenna */ 2222 #define AR5K_PHY_CTL_LOW_FREQ_SLE_EN 0x00000080 /* Enable low freq sleep */ 2223 2224 /* 2225 * PHY PAPD probe register [5111+] 2226 */ 2227 #define AR5K_PHY_PAPD_PROBE 0x9930 2228 #define AR5K_PHY_PAPD_PROBE_SH_HI_PAR 0x00000001 2229 #define AR5K_PHY_PAPD_PROBE_PCDAC_BIAS 0x00000002 2230 #define AR5K_PHY_PAPD_PROBE_COMP_GAIN 0x00000040 2231 #define AR5K_PHY_PAPD_PROBE_TXPOWER 0x00007e00 2232 #define AR5K_PHY_PAPD_PROBE_TXPOWER_S 9 2233 #define AR5K_PHY_PAPD_PROBE_TX_NEXT 0x00008000 2234 #define AR5K_PHY_PAPD_PROBE_PREDIST_EN 0x00010000 2235 #define AR5K_PHY_PAPD_PROBE_TYPE 0x01800000 /* [5112+] */ 2236 #define AR5K_PHY_PAPD_PROBE_TYPE_S 23 2237 #define AR5K_PHY_PAPD_PROBE_TYPE_OFDM 0 2238 #define AR5K_PHY_PAPD_PROBE_TYPE_XR 1 2239 #define AR5K_PHY_PAPD_PROBE_TYPE_CCK 2 2240 #define AR5K_PHY_PAPD_PROBE_GAINF 0xfe000000 2241 #define AR5K_PHY_PAPD_PROBE_GAINF_S 25 2242 #define AR5K_PHY_PAPD_PROBE_INI_5111 0x00004883 /* [5212+] */ 2243 #define AR5K_PHY_PAPD_PROBE_INI_5112 0x00004882 /* [5212+] */ 2244 2245 /* 2246 * PHY TX rate power registers [5112+] 2247 */ 2248 #define AR5K_PHY_TXPOWER_RATE1 0x9934 2249 #define AR5K_PHY_TXPOWER_RATE2 0x9938 2250 #define AR5K_PHY_TXPOWER_RATE_MAX 0x993c 2251 #define AR5K_PHY_TXPOWER_RATE_MAX_TPC_ENABLE 0x00000040 2252 #define AR5K_PHY_TXPOWER_RATE3 0xa234 2253 #define AR5K_PHY_TXPOWER_RATE4 0xa238 2254 2255 /* 2256 * PHY frame control register [5111+] 2257 */ 2258 #define AR5K_PHY_FRAME_CTL_5210 0x9804 2259 #define AR5K_PHY_FRAME_CTL_5211 0x9944 2260 #define AR5K_PHY_FRAME_CTL (ah->ah_version == AR5K_AR5210 ? \ 2261 AR5K_PHY_FRAME_CTL_5210 : AR5K_PHY_FRAME_CTL_5211) 2262 /*---[5111+]---*/ 2263 #define AR5K_PHY_FRAME_CTL_WIN_LEN 0x00000003 /* Force window length (?) */ 2264 #define AR5K_PHY_FRAME_CTL_WIN_LEN_S 0 2265 #define AR5K_PHY_FRAME_CTL_TX_CLIP 0x00000038 /* Mask for tx clip (?) */ 2266 #define AR5K_PHY_FRAME_CTL_TX_CLIP_S 3 2267 #define AR5K_PHY_FRAME_CTL_PREP_CHINFO 0x00010000 /* Prepend chan info */ 2268 #define AR5K_PHY_FRAME_CTL_EMU 0x80000000 2269 #define AR5K_PHY_FRAME_CTL_EMU_S 31 2270 /*---[5110/5111]---*/ 2271 #define AR5K_PHY_FRAME_CTL_TIMING_ERR 0x01000000 /* PHY timing error */ 2272 #define AR5K_PHY_FRAME_CTL_PARITY_ERR 0x02000000 /* Parity error */ 2273 #define AR5K_PHY_FRAME_CTL_ILLRATE_ERR 0x04000000 /* Illegal rate */ 2274 #define AR5K_PHY_FRAME_CTL_ILLLEN_ERR 0x08000000 /* Illegal length */ 2275 #define AR5K_PHY_FRAME_CTL_SERVICE_ERR 0x20000000 2276 #define AR5K_PHY_FRAME_CTL_TXURN_ERR 0x40000000 /* TX underrun */ 2277 #define AR5K_PHY_FRAME_CTL_INI \ 2278 (AR5K_PHY_FRAME_CTL_SERVICE_ERR | \ 2279 AR5K_PHY_FRAME_CTL_TXURN_ERR | \ 2280 AR5K_PHY_FRAME_CTL_ILLLEN_ERR | \ 2281 AR5K_PHY_FRAME_CTL_ILLRATE_ERR | \ 2282 AR5K_PHY_FRAME_CTL_PARITY_ERR | \ 2283 AR5K_PHY_FRAME_CTL_TIMING_ERR) 2284 2285 /* 2286 * PHY Tx Power adjustment register [5212A+] 2287 */ 2288 #define AR5K_PHY_TX_PWR_ADJ 0x994c 2289 #define AR5K_PHY_TX_PWR_ADJ_CCK_GAIN_DELTA 0x00000fc0 2290 #define AR5K_PHY_TX_PWR_ADJ_CCK_GAIN_DELTA_S 6 2291 #define AR5K_PHY_TX_PWR_ADJ_CCK_PCDAC_INDEX 0x00fc0000 2292 #define AR5K_PHY_TX_PWR_ADJ_CCK_PCDAC_INDEX_S 18 2293 2294 /* 2295 * PHY radar detection register [5111+] 2296 */ 2297 #define AR5K_PHY_RADAR 0x9954 2298 #define AR5K_PHY_RADAR_ENABLE 0x00000001 2299 #define AR5K_PHY_RADAR_DISABLE 0x00000000 2300 #define AR5K_PHY_RADAR_INBANDTHR 0x0000003e /* Inband threshold 2301 5-bits, units unknown {0..31} 2302 (? MHz ?) */ 2303 #define AR5K_PHY_RADAR_INBANDTHR_S 1 2304 2305 #define AR5K_PHY_RADAR_PRSSI_THR 0x00000fc0 /* Pulse RSSI/SNR threshold 2306 6-bits, dBm range {0..63} 2307 in dBm units. */ 2308 #define AR5K_PHY_RADAR_PRSSI_THR_S 6 2309 2310 #define AR5K_PHY_RADAR_PHEIGHT_THR 0x0003f000 /* Pulse height threshold 2311 6-bits, dBm range {0..63} 2312 in dBm units. */ 2313 #define AR5K_PHY_RADAR_PHEIGHT_THR_S 12 2314 2315 #define AR5K_PHY_RADAR_RSSI_THR 0x00fc0000 /* Radar RSSI/SNR threshold. 2316 6-bits, dBm range {0..63} 2317 in dBm units. */ 2318 #define AR5K_PHY_RADAR_RSSI_THR_S 18 2319 2320 #define AR5K_PHY_RADAR_FIRPWR_THR 0x7f000000 /* Finite Impulse Response 2321 filter power out threshold. 2322 7-bits, standard power range 2323 {0..127} in 1/2 dBm units. */ 2324 #define AR5K_PHY_RADAR_FIRPWR_THRS 24 2325 2326 /* 2327 * PHY antenna switch table registers 2328 */ 2329 #define AR5K_PHY_ANT_SWITCH_TABLE_0 0x9960 2330 #define AR5K_PHY_ANT_SWITCH_TABLE_1 0x9964 2331 2332 /* 2333 * PHY Noise floor threshold 2334 */ 2335 #define AR5K_PHY_NFTHRES 0x9968 2336 2337 /* 2338 * Sigma Delta register (?) [5213] 2339 */ 2340 #define AR5K_PHY_SIGMA_DELTA 0x996C 2341 #define AR5K_PHY_SIGMA_DELTA_ADC_SEL 0x00000003 2342 #define AR5K_PHY_SIGMA_DELTA_ADC_SEL_S 0 2343 #define AR5K_PHY_SIGMA_DELTA_FILT2 0x000000f8 2344 #define AR5K_PHY_SIGMA_DELTA_FILT2_S 3 2345 #define AR5K_PHY_SIGMA_DELTA_FILT1 0x00001f00 2346 #define AR5K_PHY_SIGMA_DELTA_FILT1_S 8 2347 #define AR5K_PHY_SIGMA_DELTA_ADC_CLIP 0x01ffe000 2348 #define AR5K_PHY_SIGMA_DELTA_ADC_CLIP_S 13 2349 2350 /* 2351 * RF restart register [5112+] (?) 2352 */ 2353 #define AR5K_PHY_RESTART 0x9970 /* restart */ 2354 #define AR5K_PHY_RESTART_DIV_GC 0x001c0000 /* Fast diversity gc_limit (?) */ 2355 #define AR5K_PHY_RESTART_DIV_GC_S 18 2356 2357 /* 2358 * RF Bus access request register (for synth-only channel switching) 2359 */ 2360 #define AR5K_PHY_RFBUS_REQ 0x997C 2361 #define AR5K_PHY_RFBUS_REQ_REQUEST 0x00000001 2362 2363 /* 2364 * Spur mitigation masks (?) 2365 */ 2366 #define AR5K_PHY_TIMING_7 0x9980 2367 #define AR5K_PHY_TIMING_8 0x9984 2368 #define AR5K_PHY_TIMING_8_PILOT_MASK_2 0x000fffff 2369 #define AR5K_PHY_TIMING_8_PILOT_MASK_2_S 0 2370 2371 #define AR5K_PHY_BIN_MASK2_1 0x9988 2372 #define AR5K_PHY_BIN_MASK2_2 0x998c 2373 #define AR5K_PHY_BIN_MASK2_3 0x9990 2374 2375 #define AR5K_PHY_BIN_MASK2_4 0x9994 2376 #define AR5K_PHY_BIN_MASK2_4_MASK_4 0x00003fff 2377 #define AR5K_PHY_BIN_MASK2_4_MASK_4_S 0 2378 2379 #define AR5K_PHY_TIMING_9 0x9998 2380 #define AR5K_PHY_TIMING_10 0x999c 2381 #define AR5K_PHY_TIMING_10_PILOT_MASK_2 0x000fffff 2382 #define AR5K_PHY_TIMING_10_PILOT_MASK_2_S 0 2383 2384 /* 2385 * Spur mitigation control 2386 */ 2387 #define AR5K_PHY_TIMING_11 0x99a0 /* Register address */ 2388 #define AR5K_PHY_TIMING_11_SPUR_DELTA_PHASE 0x000fffff /* Spur delta phase */ 2389 #define AR5K_PHY_TIMING_11_SPUR_DELTA_PHASE_S 0 2390 #define AR5K_PHY_TIMING_11_SPUR_FREQ_SD 0x3ff00000 /* Freq sigma delta */ 2391 #define AR5K_PHY_TIMING_11_SPUR_FREQ_SD_S 20 2392 #define AR5K_PHY_TIMING_11_USE_SPUR_IN_AGC 0x40000000 /* Spur filter in AGC detector */ 2393 #define AR5K_PHY_TIMING_11_USE_SPUR_IN_SELFCOR 0x80000000 /* Spur filter in OFDM self correlator */ 2394 2395 /* 2396 * Gain tables 2397 */ 2398 #define AR5K_BB_GAIN_BASE 0x9b00 /* BaseBand Amplifier Gain table base address */ 2399 #define AR5K_BB_GAIN(_n) (AR5K_BB_GAIN_BASE + ((_n) << 2)) 2400 #define AR5K_RF_GAIN_BASE 0x9a00 /* RF Amplifier Gain table base address */ 2401 #define AR5K_RF_GAIN(_n) (AR5K_RF_GAIN_BASE + ((_n) << 2)) 2402 2403 /* 2404 * PHY timing IQ calibration result register [5111+] 2405 */ 2406 #define AR5K_PHY_IQRES_CAL_PWR_I 0x9c10 /* I (Inphase) power value */ 2407 #define AR5K_PHY_IQRES_CAL_PWR_Q 0x9c14 /* Q (Quadrature) power value */ 2408 #define AR5K_PHY_IQRES_CAL_CORR 0x9c18 /* I/Q Correlation */ 2409 2410 /* 2411 * PHY current RSSI register [5111+] 2412 */ 2413 #define AR5K_PHY_CURRENT_RSSI 0x9c1c 2414 2415 /* 2416 * PHY RF Bus grant register 2417 */ 2418 #define AR5K_PHY_RFBUS_GRANT 0x9c20 2419 #define AR5K_PHY_RFBUS_GRANT_OK 0x00000001 2420 2421 /* 2422 * PHY ADC test register 2423 */ 2424 #define AR5K_PHY_ADC_TEST 0x9c24 2425 #define AR5K_PHY_ADC_TEST_I 0x00000001 2426 #define AR5K_PHY_ADC_TEST_Q 0x00000200 2427 2428 /* 2429 * PHY DAC test register 2430 */ 2431 #define AR5K_PHY_DAC_TEST 0x9c28 2432 #define AR5K_PHY_DAC_TEST_I 0x00000001 2433 #define AR5K_PHY_DAC_TEST_Q 0x00000200 2434 2435 /* 2436 * PHY PTAT register (?) 2437 */ 2438 #define AR5K_PHY_PTAT 0x9c2c 2439 2440 /* 2441 * PHY Illegal TX rate register [5112+] 2442 */ 2443 #define AR5K_PHY_BAD_TX_RATE 0x9c30 2444 2445 /* 2446 * PHY SPUR Power register [5112+] 2447 */ 2448 #define AR5K_PHY_SPUR_PWR 0x9c34 /* Register Address */ 2449 #define AR5K_PHY_SPUR_PWR_I 0x00000001 /* SPUR Power estimate for I (field) */ 2450 #define AR5K_PHY_SPUR_PWR_Q 0x00000100 /* SPUR Power estimate for Q (field) */ 2451 #define AR5K_PHY_SPUR_PWR_FILT 0x00010000 /* Power with SPUR removed (field) */ 2452 2453 /* 2454 * PHY Channel status register [5112+] (?) 2455 */ 2456 #define AR5K_PHY_CHAN_STATUS 0x9c38 2457 #define AR5K_PHY_CHAN_STATUS_BT_ACT 0x00000001 2458 #define AR5K_PHY_CHAN_STATUS_RX_CLR_RAW 0x00000002 2459 #define AR5K_PHY_CHAN_STATUS_RX_CLR_MAC 0x00000004 2460 #define AR5K_PHY_CHAN_STATUS_RX_CLR_PAP 0x00000008 2461 2462 /* 2463 * Heavy clip enable register 2464 */ 2465 #define AR5K_PHY_HEAVY_CLIP_ENABLE 0x99e0 2466 2467 /* 2468 * PHY clock sleep registers [5112+] 2469 */ 2470 #define AR5K_PHY_SCLOCK 0x99f0 2471 #define AR5K_PHY_SCLOCK_32MHZ 0x0000000c 2472 #define AR5K_PHY_SDELAY 0x99f4 2473 #define AR5K_PHY_SDELAY_32MHZ 0x000000ff 2474 #define AR5K_PHY_SPENDING 0x99f8 2475 2476 2477 /* 2478 * PHY PAPD I (power?) table (?) 2479 * (92! entries) 2480 */ 2481 #define AR5K_PHY_PAPD_I_BASE 0xa000 2482 #define AR5K_PHY_PAPD_I(_n) (AR5K_PHY_PAPD_I_BASE + ((_n) << 2)) 2483 2484 /* 2485 * PHY PCDAC TX power table 2486 */ 2487 #define AR5K_PHY_PCDAC_TXPOWER_BASE 0xa180 2488 #define AR5K_PHY_PCDAC_TXPOWER(_n) (AR5K_PHY_PCDAC_TXPOWER_BASE + ((_n) << 2)) 2489 2490 /* 2491 * PHY mode register [5111+] 2492 */ 2493 #define AR5K_PHY_MODE 0x0a200 /* Register Address */ 2494 #define AR5K_PHY_MODE_MOD 0x00000001 /* PHY Modulation bit */ 2495 #define AR5K_PHY_MODE_MOD_OFDM 0 2496 #define AR5K_PHY_MODE_MOD_CCK 1 2497 #define AR5K_PHY_MODE_FREQ 0x00000002 /* Freq mode bit */ 2498 #define AR5K_PHY_MODE_FREQ_5GHZ 0 2499 #define AR5K_PHY_MODE_FREQ_2GHZ 2 2500 #define AR5K_PHY_MODE_MOD_DYN 0x00000004 /* Enable Dynamic OFDM/CCK mode [5112+] */ 2501 #define AR5K_PHY_MODE_RAD 0x00000008 /* [5212+] */ 2502 #define AR5K_PHY_MODE_RAD_RF5111 0 2503 #define AR5K_PHY_MODE_RAD_RF5112 8 2504 #define AR5K_PHY_MODE_XR 0x00000010 /* Enable XR mode [5112+] */ 2505 #define AR5K_PHY_MODE_HALF_RATE 0x00000020 /* Enable Half rate (test) */ 2506 #define AR5K_PHY_MODE_QUARTER_RATE 0x00000040 /* Enable Quarter rat (test) */ 2507 2508 /* 2509 * PHY CCK transmit control register [5111+ (?)] 2510 */ 2511 #define AR5K_PHY_CCKTXCTL 0xa204 2512 #define AR5K_PHY_CCKTXCTL_WORLD 0x00000000 2513 #define AR5K_PHY_CCKTXCTL_JAPAN 0x00000010 2514 #define AR5K_PHY_CCKTXCTL_SCRAMBLER_DIS 0x00000001 2515 #define AR5K_PHY_CCKTXCTK_DAC_SCALE 0x00000004 2516 2517 /* 2518 * PHY CCK Cross-correlator Barker RSSI threshold register [5212+] 2519 */ 2520 #define AR5K_PHY_CCK_CROSSCORR 0xa208 2521 #define AR5K_PHY_CCK_CROSSCORR_WEAK_SIG_THR 0x0000003f 2522 #define AR5K_PHY_CCK_CROSSCORR_WEAK_SIG_THR_S 0 2523 2524 /* Same address is used for antenna diversity activation */ 2525 #define AR5K_PHY_FAST_ANT_DIV 0xa208 2526 #define AR5K_PHY_FAST_ANT_DIV_EN 0x00002000 2527 2528 /* 2529 * PHY 2GHz gain register [5111+] 2530 */ 2531 #define AR5K_PHY_GAIN_2GHZ 0xa20c 2532 #define AR5K_PHY_GAIN_2GHZ_MARGIN_TXRX 0x00fc0000 2533 #define AR5K_PHY_GAIN_2GHZ_MARGIN_TXRX_S 18 2534 #define AR5K_PHY_GAIN_2GHZ_INI_5111 0x6480416c 2535 2536 #define AR5K_PHY_CCK_RX_CTL_4 0xa21c 2537 #define AR5K_PHY_CCK_RX_CTL_4_FREQ_EST_SHORT 0x01f80000 2538 #define AR5K_PHY_CCK_RX_CTL_4_FREQ_EST_SHORT_S 19 2539 2540 #define AR5K_PHY_DAG_CCK_CTL 0xa228 2541 #define AR5K_PHY_DAG_CCK_CTL_EN_RSSI_THR 0x00000200 2542 #define AR5K_PHY_DAG_CCK_CTL_RSSI_THR 0x0001fc00 2543 #define AR5K_PHY_DAG_CCK_CTL_RSSI_THR_S 10 2544 2545 #define AR5K_PHY_FAST_ADC 0xa24c 2546 2547 #define AR5K_PHY_BLUETOOTH 0xa254 2548 2549 /* 2550 * Transmit Power Control register 2551 * [2413+] 2552 */ 2553 #define AR5K_PHY_TPC_RG1 0xa258 2554 #define AR5K_PHY_TPC_RG1_NUM_PD_GAIN 0x0000c000 2555 #define AR5K_PHY_TPC_RG1_NUM_PD_GAIN_S 14 2556 #define AR5K_PHY_TPC_RG1_PDGAIN_1 0x00030000 2557 #define AR5K_PHY_TPC_RG1_PDGAIN_1_S 16 2558 #define AR5K_PHY_TPC_RG1_PDGAIN_2 0x000c0000 2559 #define AR5K_PHY_TPC_RG1_PDGAIN_2_S 18 2560 #define AR5K_PHY_TPC_RG1_PDGAIN_3 0x00300000 2561 #define AR5K_PHY_TPC_RG1_PDGAIN_3_S 20 2562 2563 #define AR5K_PHY_TPC_RG5 0xa26C 2564 #define AR5K_PHY_TPC_RG5_PD_GAIN_OVERLAP 0x0000000F 2565 #define AR5K_PHY_TPC_RG5_PD_GAIN_OVERLAP_S 0 2566 #define AR5K_PHY_TPC_RG5_PD_GAIN_BOUNDARY_1 0x000003F0 2567 #define AR5K_PHY_TPC_RG5_PD_GAIN_BOUNDARY_1_S 4 2568 #define AR5K_PHY_TPC_RG5_PD_GAIN_BOUNDARY_2 0x0000FC00 2569 #define AR5K_PHY_TPC_RG5_PD_GAIN_BOUNDARY_2_S 10 2570 #define AR5K_PHY_TPC_RG5_PD_GAIN_BOUNDARY_3 0x003F0000 2571 #define AR5K_PHY_TPC_RG5_PD_GAIN_BOUNDARY_3_S 16 2572 #define AR5K_PHY_TPC_RG5_PD_GAIN_BOUNDARY_4 0x0FC00000 2573 #define AR5K_PHY_TPC_RG5_PD_GAIN_BOUNDARY_4_S 22 2574 2575 /* 2576 * PHY PDADC Tx power table 2577 */ 2578 #define AR5K_PHY_PDADC_TXPOWER_BASE 0xa280 2579 #define AR5K_PHY_PDADC_TXPOWER(_n) (AR5K_PHY_PDADC_TXPOWER_BASE + ((_n) << 2)) 2580 2581 /* 2582 * Platform registers for WiSoC 2583 */ 2584 #define AR5K_AR5312_RESET 0xbc003020 2585 #define AR5K_AR5312_RESET_BB0_COLD 0x00000004 2586 #define AR5K_AR5312_RESET_BB1_COLD 0x00000200 2587 #define AR5K_AR5312_RESET_WMAC0 0x00002000 2588 #define AR5K_AR5312_RESET_BB0_WARM 0x00004000 2589 #define AR5K_AR5312_RESET_WMAC1 0x00020000 2590 #define AR5K_AR5312_RESET_BB1_WARM 0x00040000 2591 2592 #define AR5K_AR5312_ENABLE 0xbc003080 2593 #define AR5K_AR5312_ENABLE_WLAN0 0x00000001 2594 #define AR5K_AR5312_ENABLE_WLAN1 0x00000008 2595 2596 #define AR5K_AR2315_RESET 0xb1000004 2597 #define AR5K_AR2315_RESET_WMAC 0x00000001 2598 #define AR5K_AR2315_RESET_BB_WARM 0x00000002 2599 2600 #define AR5K_AR2315_AHB_ARB_CTL 0xb1000008 2601 #define AR5K_AR2315_AHB_ARB_CTL_WLAN 0x00000002 2602 2603 #define AR5K_AR2315_BYTESWAP 0xb100000c 2604 #define AR5K_AR2315_BYTESWAP_WMAC 0x00000002 2605