xref: /linux/drivers/net/wireless/ath/ath5k/pci.c (revision 5a4332062e9e71de8e78dc1b389d21e0dd44848b)
1 /*
2  * Copyright (c) 2008-2009 Atheros Communications Inc.
3  *
4  * Permission to use, copy, modify, and/or distribute this software for any
5  * purpose with or without fee is hereby granted, provided that the above
6  * copyright notice and this permission notice appear in all copies.
7  *
8  * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
9  * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
10  * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
11  * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
12  * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
13  * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
14  * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
15  */
16 
17 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
18 
19 #include <linux/nl80211.h>
20 #include <linux/pci.h>
21 #include <linux/etherdevice.h>
22 #include <linux/module.h>
23 #include "../ath.h"
24 #include "ath5k.h"
25 #include "debug.h"
26 #include "base.h"
27 #include "reg.h"
28 
29 /* Known PCI ids */
30 static const struct pci_device_id ath5k_pci_id_table[] = {
31 	{ PCI_VDEVICE(ATHEROS, 0x0207) }, /* 5210 early */
32 	{ PCI_VDEVICE(ATHEROS, 0x0007) }, /* 5210 */
33 	{ PCI_VDEVICE(ATHEROS, 0x0011) }, /* 5311 - this is on AHB bus !*/
34 	{ PCI_VDEVICE(ATHEROS, 0x0012) }, /* 5211 */
35 	{ PCI_VDEVICE(ATHEROS, 0x0013) }, /* 5212 */
36 	{ PCI_VDEVICE(3COM_2,  0x0013) }, /* 3com 5212 */
37 	{ PCI_VDEVICE(3COM,    0x0013) }, /* 3com 3CRDAG675 5212 */
38 	{ PCI_VDEVICE(ATHEROS, 0x1014) }, /* IBM minipci 5212 */
39 	{ PCI_VDEVICE(ATHEROS, 0x0014) }, /* 5212 compatible */
40 	{ PCI_VDEVICE(ATHEROS, 0x0015) }, /* 5212 compatible */
41 	{ PCI_VDEVICE(ATHEROS, 0x0016) }, /* 5212 compatible */
42 	{ PCI_VDEVICE(ATHEROS, 0x0017) }, /* 5212 compatible */
43 	{ PCI_VDEVICE(ATHEROS, 0x0018) }, /* 5212 compatible */
44 	{ PCI_VDEVICE(ATHEROS, 0x0019) }, /* 5212 compatible */
45 	{ PCI_VDEVICE(ATHEROS, 0x001a) }, /* 2413 Griffin-lite */
46 	{ PCI_VDEVICE(ATHEROS, 0x001b) }, /* 5413 Eagle */
47 	{ PCI_VDEVICE(ATHEROS, 0x001c) }, /* PCI-E cards */
48 	{ PCI_VDEVICE(ATHEROS, 0x001d) }, /* 2417 Nala */
49 	{ PCI_VDEVICE(ATHEROS, 0xff1b) }, /* AR5BXB63 */
50 	{ 0 }
51 };
52 MODULE_DEVICE_TABLE(pci, ath5k_pci_id_table);
53 
54 /* return bus cachesize in 4B word units */
55 static void ath5k_pci_read_cachesize(struct ath_common *common, int *csz)
56 {
57 	struct ath5k_hw *ah = common->priv;
58 	u8 u8tmp;
59 
60 	pci_read_config_byte(ah->pdev, PCI_CACHE_LINE_SIZE, &u8tmp);
61 	*csz = (int)u8tmp;
62 
63 	/*
64 	 * This check was put in to avoid "unpleasant" consequences if
65 	 * the bootrom has not fully initialized all PCI devices.
66 	 * Sometimes the cache line size register is not set
67 	 */
68 
69 	if (*csz == 0)
70 		*csz = L1_CACHE_BYTES >> 2;   /* Use the default size */
71 }
72 
73 /*
74  * Read from eeprom
75  */
76 static bool
77 ath5k_pci_eeprom_read(struct ath_common *common, u32 offset, u16 *data)
78 {
79 	struct ath5k_hw *ah = common->ah;
80 	u32 status, timeout;
81 
82 	/*
83 	 * Initialize EEPROM access
84 	 */
85 	if (ah->ah_version == AR5K_AR5210) {
86 		AR5K_REG_ENABLE_BITS(ah, AR5K_PCICFG, AR5K_PCICFG_EEAE);
87 		(void)ath5k_hw_reg_read(ah, AR5K_EEPROM_BASE + (4 * offset));
88 	} else {
89 		ath5k_hw_reg_write(ah, offset, AR5K_EEPROM_BASE);
90 		AR5K_REG_ENABLE_BITS(ah, AR5K_EEPROM_CMD,
91 				AR5K_EEPROM_CMD_READ);
92 	}
93 
94 	for (timeout = AR5K_TUNE_REGISTER_TIMEOUT; timeout > 0; timeout--) {
95 		status = ath5k_hw_reg_read(ah, AR5K_EEPROM_STATUS);
96 		if (status & AR5K_EEPROM_STAT_RDDONE) {
97 			if (status & AR5K_EEPROM_STAT_RDERR)
98 				return false;
99 			*data = (u16)(ath5k_hw_reg_read(ah, AR5K_EEPROM_DATA) &
100 					0xffff);
101 			return true;
102 		}
103 		usleep_range(15, 20);
104 	}
105 
106 	return false;
107 }
108 
109 int ath5k_hw_read_srev(struct ath5k_hw *ah)
110 {
111 	ah->ah_mac_srev = ath5k_hw_reg_read(ah, AR5K_SREV);
112 	return 0;
113 }
114 
115 /*
116  * Read the MAC address from eeprom or platform_data
117  */
118 static int ath5k_pci_eeprom_read_mac(struct ath5k_hw *ah, u8 *mac)
119 {
120 	u8 mac_d[ETH_ALEN] = {};
121 	u32 total, offset;
122 	u16 data;
123 	int octet;
124 
125 	AR5K_EEPROM_READ(0x20, data);
126 
127 	for (offset = 0x1f, octet = 0, total = 0; offset >= 0x1d; offset--) {
128 		AR5K_EEPROM_READ(offset, data);
129 
130 		total += data;
131 		mac_d[octet + 1] = data & 0xff;
132 		mac_d[octet] = data >> 8;
133 		octet += 2;
134 	}
135 
136 	if (!total || total == 3 * 0xffff)
137 		return -EINVAL;
138 
139 	memcpy(mac, mac_d, ETH_ALEN);
140 
141 	return 0;
142 }
143 
144 
145 /* Common ath_bus_opts structure */
146 static const struct ath_bus_ops ath_pci_bus_ops = {
147 	.ath_bus_type = ATH_PCI,
148 	.read_cachesize = ath5k_pci_read_cachesize,
149 	.eeprom_read = ath5k_pci_eeprom_read,
150 	.eeprom_read_mac = ath5k_pci_eeprom_read_mac,
151 };
152 
153 /********************\
154 * PCI Initialization *
155 \********************/
156 
157 static int
158 ath5k_pci_probe(struct pci_dev *pdev,
159 		const struct pci_device_id *id)
160 {
161 	void __iomem *mem;
162 	struct ath5k_hw *ah;
163 	struct ieee80211_hw *hw;
164 	int ret;
165 	u8 csz;
166 
167 	/*
168 	 * L0s needs to be disabled on all ath5k cards.
169 	 *
170 	 * For distributions shipping with CONFIG_PCIEASPM (this will be enabled
171 	 * by default in the future in 2.6.36) this will also mean both L1 and
172 	 * L0s will be disabled when a pre 1.1 PCIe device is detected. We do
173 	 * know L1 works correctly even for all ath5k pre 1.1 PCIe devices
174 	 * though but cannot currently undue the effect of a blacklist, for
175 	 * details you can read pcie_aspm_sanity_check() and see how it adjusts
176 	 * the device link capability.
177 	 *
178 	 * It may be possible in the future to implement some PCI API to allow
179 	 * drivers to override blacklists for pre 1.1 PCIe but for now it is
180 	 * best to accept that both L0s and L1 will be disabled completely for
181 	 * distributions shipping with CONFIG_PCIEASPM rather than having this
182 	 * issue present. Motivation for adding this new API will be to help
183 	 * with power consumption for some of these devices.
184 	 */
185 	pci_disable_link_state(pdev, PCIE_LINK_STATE_L0S);
186 
187 	ret = pci_enable_device(pdev);
188 	if (ret) {
189 		dev_err(&pdev->dev, "can't enable device\n");
190 		goto err;
191 	}
192 
193 	/* XXX 32-bit addressing only */
194 	ret = dma_set_mask(&pdev->dev, DMA_BIT_MASK(32));
195 	if (ret) {
196 		dev_err(&pdev->dev, "32-bit DMA not available\n");
197 		goto err_dis;
198 	}
199 
200 	/*
201 	 * Cache line size is used to size and align various
202 	 * structures used to communicate with the hardware.
203 	 */
204 	pci_read_config_byte(pdev, PCI_CACHE_LINE_SIZE, &csz);
205 	if (csz == 0) {
206 		/*
207 		 * Linux 2.4.18 (at least) writes the cache line size
208 		 * register as a 16-bit wide register which is wrong.
209 		 * We must have this setup properly for rx buffer
210 		 * DMA to work so force a reasonable value here if it
211 		 * comes up zero.
212 		 */
213 		csz = L1_CACHE_BYTES >> 2;
214 		pci_write_config_byte(pdev, PCI_CACHE_LINE_SIZE, csz);
215 	}
216 	/*
217 	 * The default setting of latency timer yields poor results,
218 	 * set it to the value used by other systems.  It may be worth
219 	 * tweaking this setting more.
220 	 */
221 	pci_write_config_byte(pdev, PCI_LATENCY_TIMER, 0xa8);
222 
223 	/* Enable bus mastering */
224 	pci_set_master(pdev);
225 
226 	/*
227 	 * Disable the RETRY_TIMEOUT register (0x41) to keep
228 	 * PCI Tx retries from interfering with C3 CPU state.
229 	 */
230 	pci_write_config_byte(pdev, 0x41, 0);
231 
232 	ret = pci_request_region(pdev, 0, "ath5k");
233 	if (ret) {
234 		dev_err(&pdev->dev, "cannot reserve PCI memory region\n");
235 		goto err_dis;
236 	}
237 
238 	mem = pci_iomap(pdev, 0, 0);
239 	if (!mem) {
240 		dev_err(&pdev->dev, "cannot remap PCI memory region\n");
241 		ret = -EIO;
242 		goto err_reg;
243 	}
244 
245 	/*
246 	 * Allocate hw (mac80211 main struct)
247 	 * and hw->priv (driver private data)
248 	 */
249 	hw = ieee80211_alloc_hw(sizeof(*ah), &ath5k_hw_ops);
250 	if (hw == NULL) {
251 		dev_err(&pdev->dev, "cannot allocate ieee80211_hw\n");
252 		ret = -ENOMEM;
253 		goto err_map;
254 	}
255 
256 	dev_info(&pdev->dev, "registered as '%s'\n", wiphy_name(hw->wiphy));
257 
258 	ah = hw->priv;
259 	ah->hw = hw;
260 	ah->pdev = pdev;
261 	ah->dev = &pdev->dev;
262 	ah->irq = pdev->irq;
263 	ah->devid = id->device;
264 	ah->iobase = mem; /* So we can unmap it on detach */
265 
266 	/* Initialize */
267 	ret = ath5k_init_ah(ah, &ath_pci_bus_ops);
268 	if (ret)
269 		goto err_free;
270 
271 	/* Set private data */
272 	pci_set_drvdata(pdev, hw);
273 
274 	return 0;
275 err_free:
276 	ieee80211_free_hw(hw);
277 err_map:
278 	pci_iounmap(pdev, mem);
279 err_reg:
280 	pci_release_region(pdev, 0);
281 err_dis:
282 	pci_disable_device(pdev);
283 err:
284 	return ret;
285 }
286 
287 static void
288 ath5k_pci_remove(struct pci_dev *pdev)
289 {
290 	struct ieee80211_hw *hw = pci_get_drvdata(pdev);
291 	struct ath5k_hw *ah = hw->priv;
292 
293 	ath5k_deinit_ah(ah);
294 	pci_iounmap(pdev, ah->iobase);
295 	pci_release_region(pdev, 0);
296 	pci_disable_device(pdev);
297 	ieee80211_free_hw(hw);
298 }
299 
300 #ifdef CONFIG_PM_SLEEP
301 static int ath5k_pci_suspend(struct device *dev)
302 {
303 	struct ieee80211_hw *hw = dev_get_drvdata(dev);
304 	struct ath5k_hw *ah = hw->priv;
305 
306 	ath5k_led_off(ah);
307 	return 0;
308 }
309 
310 static int ath5k_pci_resume(struct device *dev)
311 {
312 	struct pci_dev *pdev = to_pci_dev(dev);
313 	struct ieee80211_hw *hw = pci_get_drvdata(pdev);
314 	struct ath5k_hw *ah = hw->priv;
315 
316 	/*
317 	 * Suspend/Resume resets the PCI configuration space, so we have to
318 	 * re-disable the RETRY_TIMEOUT register (0x41) to keep
319 	 * PCI Tx retries from interfering with C3 CPU state
320 	 */
321 	pci_write_config_byte(pdev, 0x41, 0);
322 
323 	ath5k_led_enable(ah);
324 	return 0;
325 }
326 
327 static SIMPLE_DEV_PM_OPS(ath5k_pm_ops, ath5k_pci_suspend, ath5k_pci_resume);
328 #define ATH5K_PM_OPS	(&ath5k_pm_ops)
329 #else
330 #define ATH5K_PM_OPS	NULL
331 #endif /* CONFIG_PM_SLEEP */
332 
333 static struct pci_driver ath5k_pci_driver = {
334 	.name		= KBUILD_MODNAME,
335 	.id_table	= ath5k_pci_id_table,
336 	.probe		= ath5k_pci_probe,
337 	.remove		= ath5k_pci_remove,
338 	.driver.pm	= ATH5K_PM_OPS,
339 };
340 
341 module_pci_driver(ath5k_pci_driver);
342