1 /* 2 * Copyright (c) 2004-2007 Reyk Floeter <reyk@openbsd.org> 3 * Copyright (c) 2006-2007 Nick Kossifidis <mickflemm@gmail.com> 4 * 5 * Permission to use, copy, modify, and distribute this software for any 6 * purpose with or without fee is hereby granted, provided that the above 7 * copyright notice and this permission notice appear in all copies. 8 * 9 * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES 10 * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF 11 * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR 12 * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES 13 * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN 14 * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF 15 * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. 16 */ 17 18 #ifndef _ATH5K_H 19 #define _ATH5K_H 20 21 /* TODO: Clean up channel debugging (doesn't work anyway) and start 22 * working on reg. control code using all available eeprom information 23 * (rev. engineering needed) */ 24 #define CHAN_DEBUG 0 25 26 #include <linux/io.h> 27 #include <linux/interrupt.h> 28 #include <linux/types.h> 29 #include <linux/average.h> 30 #include <linux/leds.h> 31 #include <net/mac80211.h> 32 #include <net/cfg80211.h> 33 34 /* RX/TX descriptor hw structs 35 * TODO: Driver part should only see sw structs */ 36 #include "desc.h" 37 38 /* EEPROM structs/offsets 39 * TODO: Make a more generic struct (eg. add more stuff to ath5k_capabilities) 40 * and clean up common bits, then introduce set/get functions in eeprom.c */ 41 #include "eeprom.h" 42 #include "debug.h" 43 #include "../ath.h" 44 #include "ani.h" 45 46 /* PCI IDs */ 47 #define PCI_DEVICE_ID_ATHEROS_AR5210 0x0007 /* AR5210 */ 48 #define PCI_DEVICE_ID_ATHEROS_AR5311 0x0011 /* AR5311 */ 49 #define PCI_DEVICE_ID_ATHEROS_AR5211 0x0012 /* AR5211 */ 50 #define PCI_DEVICE_ID_ATHEROS_AR5212 0x0013 /* AR5212 */ 51 #define PCI_DEVICE_ID_3COM_3CRDAG675 0x0013 /* 3CRDAG675 (Atheros AR5212) */ 52 #define PCI_DEVICE_ID_3COM_2_3CRPAG175 0x0013 /* 3CRPAG175 (Atheros AR5212) */ 53 #define PCI_DEVICE_ID_ATHEROS_AR5210_AP 0x0207 /* AR5210 (Early) */ 54 #define PCI_DEVICE_ID_ATHEROS_AR5212_IBM 0x1014 /* AR5212 (IBM MiniPCI) */ 55 #define PCI_DEVICE_ID_ATHEROS_AR5210_DEFAULT 0x1107 /* AR5210 (no eeprom) */ 56 #define PCI_DEVICE_ID_ATHEROS_AR5212_DEFAULT 0x1113 /* AR5212 (no eeprom) */ 57 #define PCI_DEVICE_ID_ATHEROS_AR5211_DEFAULT 0x1112 /* AR5211 (no eeprom) */ 58 #define PCI_DEVICE_ID_ATHEROS_AR5212_FPGA 0xf013 /* AR5212 (emulation board) */ 59 #define PCI_DEVICE_ID_ATHEROS_AR5211_LEGACY 0xff12 /* AR5211 (emulation board) */ 60 #define PCI_DEVICE_ID_ATHEROS_AR5211_FPGA11B 0xf11b /* AR5211 (emulation board) */ 61 #define PCI_DEVICE_ID_ATHEROS_AR5312_REV2 0x0052 /* AR5312 WMAC (AP31) */ 62 #define PCI_DEVICE_ID_ATHEROS_AR5312_REV7 0x0057 /* AR5312 WMAC (AP30-040) */ 63 #define PCI_DEVICE_ID_ATHEROS_AR5312_REV8 0x0058 /* AR5312 WMAC (AP43-030) */ 64 #define PCI_DEVICE_ID_ATHEROS_AR5212_0014 0x0014 /* AR5212 compatible */ 65 #define PCI_DEVICE_ID_ATHEROS_AR5212_0015 0x0015 /* AR5212 compatible */ 66 #define PCI_DEVICE_ID_ATHEROS_AR5212_0016 0x0016 /* AR5212 compatible */ 67 #define PCI_DEVICE_ID_ATHEROS_AR5212_0017 0x0017 /* AR5212 compatible */ 68 #define PCI_DEVICE_ID_ATHEROS_AR5212_0018 0x0018 /* AR5212 compatible */ 69 #define PCI_DEVICE_ID_ATHEROS_AR5212_0019 0x0019 /* AR5212 compatible */ 70 #define PCI_DEVICE_ID_ATHEROS_AR2413 0x001a /* AR2413 (Griffin-lite) */ 71 #define PCI_DEVICE_ID_ATHEROS_AR5413 0x001b /* AR5413 (Eagle) */ 72 #define PCI_DEVICE_ID_ATHEROS_AR5424 0x001c /* AR5424 (Condor PCI-E) */ 73 #define PCI_DEVICE_ID_ATHEROS_AR5416 0x0023 /* AR5416 */ 74 #define PCI_DEVICE_ID_ATHEROS_AR5418 0x0024 /* AR5418 */ 75 76 /****************************\ 77 GENERIC DRIVER DEFINITIONS 78 \****************************/ 79 80 #define ATH5K_PRINTF(fmt, ...) \ 81 pr_warn("%s: " fmt, __func__, ##__VA_ARGS__) 82 83 void __printf(3, 4) 84 _ath5k_printk(const struct ath5k_hw *ah, const char *level, 85 const char *fmt, ...); 86 87 #define ATH5K_PRINTK(_sc, _level, _fmt, ...) \ 88 _ath5k_printk(_sc, _level, _fmt, ##__VA_ARGS__) 89 90 #define ATH5K_PRINTK_LIMIT(_sc, _level, _fmt, ...) \ 91 do { \ 92 if (net_ratelimit()) \ 93 ATH5K_PRINTK(_sc, _level, _fmt, ##__VA_ARGS__); \ 94 } while (0) 95 96 #define ATH5K_INFO(_sc, _fmt, ...) \ 97 ATH5K_PRINTK(_sc, KERN_INFO, _fmt, ##__VA_ARGS__) 98 99 #define ATH5K_WARN(_sc, _fmt, ...) \ 100 ATH5K_PRINTK_LIMIT(_sc, KERN_WARNING, _fmt, ##__VA_ARGS__) 101 102 #define ATH5K_ERR(_sc, _fmt, ...) \ 103 ATH5K_PRINTK_LIMIT(_sc, KERN_ERR, _fmt, ##__VA_ARGS__) 104 105 /* 106 * AR5K REGISTER ACCESS 107 */ 108 109 /* Some macros to read/write fields */ 110 111 /* First shift, then mask */ 112 #define AR5K_REG_SM(_val, _flags) \ 113 (((_val) << _flags##_S) & (_flags)) 114 115 /* First mask, then shift */ 116 #define AR5K_REG_MS(_val, _flags) \ 117 (((_val) & (_flags)) >> _flags##_S) 118 119 /* Some registers can hold multiple values of interest. For this 120 * reason when we want to write to these registers we must first 121 * retrieve the values which we do not want to clear (lets call this 122 * old_data) and then set the register with this and our new_value: 123 * ( old_data | new_value) */ 124 #define AR5K_REG_WRITE_BITS(ah, _reg, _flags, _val) \ 125 ath5k_hw_reg_write(ah, (ath5k_hw_reg_read(ah, _reg) & ~(_flags)) | \ 126 (((_val) << _flags##_S) & (_flags)), _reg) 127 128 #define AR5K_REG_MASKED_BITS(ah, _reg, _flags, _mask) \ 129 ath5k_hw_reg_write(ah, (ath5k_hw_reg_read(ah, _reg) & \ 130 (_mask)) | (_flags), _reg) 131 132 #define AR5K_REG_ENABLE_BITS(ah, _reg, _flags) \ 133 ath5k_hw_reg_write(ah, ath5k_hw_reg_read(ah, _reg) | (_flags), _reg) 134 135 #define AR5K_REG_DISABLE_BITS(ah, _reg, _flags) \ 136 ath5k_hw_reg_write(ah, ath5k_hw_reg_read(ah, _reg) & ~(_flags), _reg) 137 138 /* Access QCU registers per queue */ 139 #define AR5K_REG_READ_Q(ah, _reg, _queue) \ 140 (ath5k_hw_reg_read(ah, _reg) & (1 << _queue)) \ 141 142 #define AR5K_REG_WRITE_Q(ah, _reg, _queue) \ 143 ath5k_hw_reg_write(ah, (1 << _queue), _reg) 144 145 #define AR5K_Q_ENABLE_BITS(_reg, _queue) do { \ 146 _reg |= 1 << _queue; \ 147 } while (0) 148 149 #define AR5K_Q_DISABLE_BITS(_reg, _queue) do { \ 150 _reg &= ~(1 << _queue); \ 151 } while (0) 152 153 /* Used while writing initvals */ 154 #define AR5K_REG_WAIT(_i) do { \ 155 if (_i % 64) \ 156 udelay(1); \ 157 } while (0) 158 159 /* 160 * Some tunable values (these should be changeable by the user) 161 * TODO: Make use of them and add more options OR use debug/configfs 162 */ 163 #define AR5K_TUNE_DMA_BEACON_RESP 2 164 #define AR5K_TUNE_SW_BEACON_RESP 10 165 #define AR5K_TUNE_ADDITIONAL_SWBA_BACKOFF 0 166 #define AR5K_TUNE_MIN_TX_FIFO_THRES 1 167 #define AR5K_TUNE_MAX_TX_FIFO_THRES ((IEEE80211_MAX_FRAME_LEN / 64) + 1) 168 #define AR5K_TUNE_REGISTER_TIMEOUT 20000 169 /* Register for RSSI threshold has a mask of 0xff, so 255 seems to 170 * be the max value. */ 171 #define AR5K_TUNE_RSSI_THRES 129 172 /* This must be set when setting the RSSI threshold otherwise it can 173 * prevent a reset. If AR5K_RSSI_THR is read after writing to it 174 * the BMISS_THRES will be seen as 0, seems hardware doesn't keep 175 * track of it. Max value depends on hardware. For AR5210 this is just 7. 176 * For AR5211+ this seems to be up to 255. */ 177 #define AR5K_TUNE_BMISS_THRES 7 178 #define AR5K_TUNE_REGISTER_DWELL_TIME 20000 179 #define AR5K_TUNE_BEACON_INTERVAL 100 180 #define AR5K_TUNE_AIFS 2 181 #define AR5K_TUNE_AIFS_11B 2 182 #define AR5K_TUNE_AIFS_XR 0 183 #define AR5K_TUNE_CWMIN 15 184 #define AR5K_TUNE_CWMIN_11B 31 185 #define AR5K_TUNE_CWMIN_XR 3 186 #define AR5K_TUNE_CWMAX 1023 187 #define AR5K_TUNE_CWMAX_11B 1023 188 #define AR5K_TUNE_CWMAX_XR 7 189 #define AR5K_TUNE_NOISE_FLOOR -72 190 #define AR5K_TUNE_CCA_MAX_GOOD_VALUE -95 191 #define AR5K_TUNE_MAX_TXPOWER 63 192 #define AR5K_TUNE_DEFAULT_TXPOWER 25 193 #define AR5K_TUNE_TPC_TXPOWER false 194 #define ATH5K_TUNE_CALIBRATION_INTERVAL_FULL 60000 /* 60 sec */ 195 #define ATH5K_TUNE_CALIBRATION_INTERVAL_SHORT 10000 /* 10 sec */ 196 #define ATH5K_TUNE_CALIBRATION_INTERVAL_ANI 1000 /* 1 sec */ 197 #define ATH5K_TX_COMPLETE_POLL_INT 3000 /* 3 sec */ 198 199 #define AR5K_INIT_CARR_SENSE_EN 1 200 201 /*Swap RX/TX Descriptor for big endian archs*/ 202 #if defined(__BIG_ENDIAN) 203 #define AR5K_INIT_CFG ( \ 204 AR5K_CFG_SWTD | AR5K_CFG_SWRD \ 205 ) 206 #else 207 #define AR5K_INIT_CFG 0x00000000 208 #endif 209 210 /* Initial values */ 211 #define AR5K_INIT_CYCRSSI_THR1 2 212 213 /* Tx retry limit defaults from standard */ 214 #define AR5K_INIT_RETRY_SHORT 7 215 #define AR5K_INIT_RETRY_LONG 4 216 217 /* Slot time */ 218 #define AR5K_INIT_SLOT_TIME_TURBO 6 219 #define AR5K_INIT_SLOT_TIME_DEFAULT 9 220 #define AR5K_INIT_SLOT_TIME_HALF_RATE 13 221 #define AR5K_INIT_SLOT_TIME_QUARTER_RATE 21 222 #define AR5K_INIT_SLOT_TIME_B 20 223 #define AR5K_SLOT_TIME_MAX 0xffff 224 225 /* SIFS */ 226 #define AR5K_INIT_SIFS_TURBO 6 227 #define AR5K_INIT_SIFS_DEFAULT_BG 10 228 #define AR5K_INIT_SIFS_DEFAULT_A 16 229 #define AR5K_INIT_SIFS_HALF_RATE 32 230 #define AR5K_INIT_SIFS_QUARTER_RATE 64 231 232 /* Used to calculate tx time for non 5/10/40MHz 233 * operation */ 234 /* It's preamble time + signal time (16 + 4) */ 235 #define AR5K_INIT_OFDM_PREAMPLE_TIME 20 236 /* Preamble time for 40MHz (turbo) operation (min ?) */ 237 #define AR5K_INIT_OFDM_PREAMBLE_TIME_MIN 14 238 #define AR5K_INIT_OFDM_SYMBOL_TIME 4 239 #define AR5K_INIT_OFDM_PLCP_BITS 22 240 241 /* Rx latency for 5 and 10MHz operation (max ?) */ 242 #define AR5K_INIT_RX_LAT_MAX 63 243 /* Tx latencies from initvals (5212 only but no problem 244 * because we only tweak them on 5212) */ 245 #define AR5K_INIT_TX_LAT_A 54 246 #define AR5K_INIT_TX_LAT_BG 384 247 /* Tx latency for 40MHz (turbo) operation (min ?) */ 248 #define AR5K_INIT_TX_LAT_MIN 32 249 /* Default Tx/Rx latencies (same for 5211)*/ 250 #define AR5K_INIT_TX_LATENCY_5210 54 251 #define AR5K_INIT_RX_LATENCY_5210 29 252 253 /* Tx frame to Tx data start delay */ 254 #define AR5K_INIT_TXF2TXD_START_DEFAULT 14 255 #define AR5K_INIT_TXF2TXD_START_DELAY_10MHZ 12 256 #define AR5K_INIT_TXF2TXD_START_DELAY_5MHZ 13 257 258 /* We need to increase PHY switch and agc settling time 259 * on turbo mode */ 260 #define AR5K_SWITCH_SETTLING 5760 261 #define AR5K_SWITCH_SETTLING_TURBO 7168 262 263 #define AR5K_AGC_SETTLING 28 264 /* 38 on 5210 but shouldn't matter */ 265 #define AR5K_AGC_SETTLING_TURBO 37 266 267 268 269 /*****************************\ 270 * GENERIC CHIPSET DEFINITIONS * 271 \*****************************/ 272 273 /** 274 * enum ath5k_version - MAC Chips 275 * @AR5K_AR5210: AR5210 (Crete) 276 * @AR5K_AR5211: AR5211 (Oahu/Maui) 277 * @AR5K_AR5212: AR5212 (Venice) and newer 278 */ 279 enum ath5k_version { 280 AR5K_AR5210 = 0, 281 AR5K_AR5211 = 1, 282 AR5K_AR5212 = 2, 283 }; 284 285 /** 286 * enum ath5k_radio - PHY Chips 287 * @AR5K_RF5110: RF5110 (Fez) 288 * @AR5K_RF5111: RF5111 (Sombrero) 289 * @AR5K_RF5112: RF2112/5112(A) (Derby/Derby2) 290 * @AR5K_RF2413: RF2413/2414 (Griffin/Griffin-Lite) 291 * @AR5K_RF5413: RF5413/5414/5424 (Eagle/Condor) 292 * @AR5K_RF2316: RF2315/2316 (Cobra SoC) 293 * @AR5K_RF2317: RF2317 (Spider SoC) 294 * @AR5K_RF2425: RF2425/2417 (Swan/Nalla) 295 */ 296 enum ath5k_radio { 297 AR5K_RF5110 = 0, 298 AR5K_RF5111 = 1, 299 AR5K_RF5112 = 2, 300 AR5K_RF2413 = 3, 301 AR5K_RF5413 = 4, 302 AR5K_RF2316 = 5, 303 AR5K_RF2317 = 6, 304 AR5K_RF2425 = 7, 305 }; 306 307 /* 308 * Common silicon revision/version values 309 */ 310 311 #define AR5K_SREV_UNKNOWN 0xffff 312 313 #define AR5K_SREV_AR5210 0x00 /* Crete */ 314 #define AR5K_SREV_AR5311 0x10 /* Maui 1 */ 315 #define AR5K_SREV_AR5311A 0x20 /* Maui 2 */ 316 #define AR5K_SREV_AR5311B 0x30 /* Spirit */ 317 #define AR5K_SREV_AR5211 0x40 /* Oahu */ 318 #define AR5K_SREV_AR5212 0x50 /* Venice */ 319 #define AR5K_SREV_AR5312_R2 0x52 /* AP31 */ 320 #define AR5K_SREV_AR5212_V4 0x54 /* ??? */ 321 #define AR5K_SREV_AR5213 0x55 /* ??? */ 322 #define AR5K_SREV_AR5312_R7 0x57 /* AP30 */ 323 #define AR5K_SREV_AR2313_R8 0x58 /* AP43 */ 324 #define AR5K_SREV_AR5213A 0x59 /* Hainan */ 325 #define AR5K_SREV_AR2413 0x78 /* Griffin lite */ 326 #define AR5K_SREV_AR2414 0x70 /* Griffin */ 327 #define AR5K_SREV_AR2315_R6 0x86 /* AP51-Light */ 328 #define AR5K_SREV_AR2315_R7 0x87 /* AP51-Full */ 329 #define AR5K_SREV_AR5424 0x90 /* Condor */ 330 #define AR5K_SREV_AR2317_R1 0x90 /* AP61-Light */ 331 #define AR5K_SREV_AR2317_R2 0x91 /* AP61-Full */ 332 #define AR5K_SREV_AR5413 0xa4 /* Eagle lite */ 333 #define AR5K_SREV_AR5414 0xa0 /* Eagle */ 334 #define AR5K_SREV_AR2415 0xb0 /* Talon */ 335 #define AR5K_SREV_AR5416 0xc0 /* PCI-E */ 336 #define AR5K_SREV_AR5418 0xca /* PCI-E */ 337 #define AR5K_SREV_AR2425 0xe0 /* Swan */ 338 #define AR5K_SREV_AR2417 0xf0 /* Nala */ 339 340 #define AR5K_SREV_RAD_5110 0x00 341 #define AR5K_SREV_RAD_5111 0x10 342 #define AR5K_SREV_RAD_5111A 0x15 343 #define AR5K_SREV_RAD_2111 0x20 344 #define AR5K_SREV_RAD_5112 0x30 345 #define AR5K_SREV_RAD_5112A 0x35 346 #define AR5K_SREV_RAD_5112B 0x36 347 #define AR5K_SREV_RAD_2112 0x40 348 #define AR5K_SREV_RAD_2112A 0x45 349 #define AR5K_SREV_RAD_2112B 0x46 350 #define AR5K_SREV_RAD_2413 0x50 351 #define AR5K_SREV_RAD_5413 0x60 352 #define AR5K_SREV_RAD_2316 0x70 /* Cobra SoC */ 353 #define AR5K_SREV_RAD_2317 0x80 354 #define AR5K_SREV_RAD_5424 0xa0 /* Mostly same as 5413 */ 355 #define AR5K_SREV_RAD_2425 0xa2 356 #define AR5K_SREV_RAD_5133 0xc0 357 358 #define AR5K_SREV_PHY_5211 0x30 359 #define AR5K_SREV_PHY_5212 0x41 360 #define AR5K_SREV_PHY_5212A 0x42 361 #define AR5K_SREV_PHY_5212B 0x43 362 #define AR5K_SREV_PHY_2413 0x45 363 #define AR5K_SREV_PHY_5413 0x61 364 #define AR5K_SREV_PHY_2425 0x70 365 366 /* TODO add support to mac80211 for vendor-specific rates and modes */ 367 368 /** 369 * DOC: Atheros XR 370 * 371 * Some of this information is based on Documentation from: 372 * 373 * http://madwifi-project.org/wiki/ChipsetFeatures/SuperAG 374 * 375 * Atheros' eXtended Range - range enhancing extension is a modulation scheme 376 * that is supposed to double the link distance between an Atheros XR-enabled 377 * client device with an Atheros XR-enabled access point. This is achieved 378 * by increasing the receiver sensitivity up to, -105dBm, which is about 20dB 379 * above what the 802.11 specifications demand. In addition, new (proprietary) 380 * data rates are introduced: 3, 2, 1, 0.5 and 0.25 MBit/s. 381 * 382 * Please note that can you either use XR or TURBO but you cannot use both, 383 * they are exclusive. 384 * 385 * Also note that we do not plan to support XR mode at least for now. You can 386 * get a mode similar to XR by using 5MHz bwmode. 387 */ 388 389 390 /** 391 * DOC: Atheros SuperAG 392 * 393 * In addition to XR we have another modulation scheme called TURBO mode 394 * that is supposed to provide a throughput transmission speed up to 40Mbit/s 395 * -60Mbit/s at a 108Mbit/s signaling rate achieved through the bonding of two 396 * 54Mbit/s 802.11g channels. To use this feature both ends must support it. 397 * There is also a distinction between "static" and "dynamic" turbo modes: 398 * 399 * - Static: is the dumb version: devices set to this mode stick to it until 400 * the mode is turned off. 401 * 402 * - Dynamic: is the intelligent version, the network decides itself if it 403 * is ok to use turbo. As soon as traffic is detected on adjacent channels 404 * (which would get used in turbo mode), or when a non-turbo station joins 405 * the network, turbo mode won't be used until the situation changes again. 406 * Dynamic mode is achieved by Atheros' Adaptive Radio (AR) feature which 407 * monitors the used radio band in order to decide whether turbo mode may 408 * be used or not. 409 * 410 * This article claims Super G sticks to bonding of channels 5 and 6 for 411 * USA: 412 * 413 * http://www.pcworld.com/article/id,113428-page,1/article.html 414 * 415 * The channel bonding seems to be driver specific though. 416 * 417 * In addition to TURBO modes we also have the following features for even 418 * greater speed-up: 419 * 420 * - Bursting: allows multiple frames to be sent at once, rather than pausing 421 * after each frame. Bursting is a standards-compliant feature that can be 422 * used with any Access Point. 423 * 424 * - Fast frames: increases the amount of information that can be sent per 425 * frame, also resulting in a reduction of transmission overhead. It is a 426 * proprietary feature that needs to be supported by the Access Point. 427 * 428 * - Compression: data frames are compressed in real time using a Lempel Ziv 429 * algorithm. This is done transparently. Once this feature is enabled, 430 * compression and decompression takes place inside the chipset, without 431 * putting additional load on the host CPU. 432 * 433 * As with XR we also don't plan to support SuperAG features for now. You can 434 * get a mode similar to TURBO by using 40MHz bwmode. 435 */ 436 437 438 /** 439 * enum ath5k_driver_mode - PHY operation mode 440 * @AR5K_MODE_11A: 802.11a 441 * @AR5K_MODE_11B: 802.11b 442 * @AR5K_MODE_11G: 801.11g 443 * @AR5K_MODE_MAX: Used for boundary checks 444 * 445 * Do not change the order here, we use these as 446 * array indices and it also maps EEPROM structures. 447 */ 448 enum ath5k_driver_mode { 449 AR5K_MODE_11A = 0, 450 AR5K_MODE_11B = 1, 451 AR5K_MODE_11G = 2, 452 AR5K_MODE_MAX = 3 453 }; 454 455 /** 456 * enum ath5k_ant_mode - Antenna operation mode 457 * @AR5K_ANTMODE_DEFAULT: Default antenna setup 458 * @AR5K_ANTMODE_FIXED_A: Only antenna A is present 459 * @AR5K_ANTMODE_FIXED_B: Only antenna B is present 460 * @AR5K_ANTMODE_SINGLE_AP: STA locked on a single ap 461 * @AR5K_ANTMODE_SECTOR_AP: AP with tx antenna set on tx desc 462 * @AR5K_ANTMODE_SECTOR_STA: STA with tx antenna set on tx desc 463 * @AR5K_ANTMODE_DEBUG: Debug mode -A -> Rx, B-> Tx- 464 * @AR5K_ANTMODE_MAX: Used for boundary checks 465 * 466 * For more infos on antenna control check out phy.c 467 */ 468 enum ath5k_ant_mode { 469 AR5K_ANTMODE_DEFAULT = 0, 470 AR5K_ANTMODE_FIXED_A = 1, 471 AR5K_ANTMODE_FIXED_B = 2, 472 AR5K_ANTMODE_SINGLE_AP = 3, 473 AR5K_ANTMODE_SECTOR_AP = 4, 474 AR5K_ANTMODE_SECTOR_STA = 5, 475 AR5K_ANTMODE_DEBUG = 6, 476 AR5K_ANTMODE_MAX, 477 }; 478 479 /** 480 * enum ath5k_bw_mode - Bandwidth operation mode 481 * @AR5K_BWMODE_DEFAULT: 20MHz, default operation 482 * @AR5K_BWMODE_5MHZ: Quarter rate 483 * @AR5K_BWMODE_10MHZ: Half rate 484 * @AR5K_BWMODE_40MHZ: Turbo 485 */ 486 enum ath5k_bw_mode { 487 AR5K_BWMODE_DEFAULT = 0, 488 AR5K_BWMODE_5MHZ = 1, 489 AR5K_BWMODE_10MHZ = 2, 490 AR5K_BWMODE_40MHZ = 3 491 }; 492 493 494 495 /****************\ 496 TX DEFINITIONS 497 \****************/ 498 499 /** 500 * struct ath5k_tx_status - TX Status descriptor 501 * @ts_seqnum: Sequence number 502 * @ts_tstamp: Timestamp 503 * @ts_status: Status code 504 * @ts_final_idx: Final transmission series index 505 * @ts_final_retry: Final retry count 506 * @ts_rssi: RSSI for received ACK 507 * @ts_shortretry: Short retry count 508 * @ts_virtcol: Virtual collision count 509 * @ts_antenna: Antenna used 510 * 511 * TX status descriptor gets filled by the hw 512 * on each transmission attempt. 513 */ 514 struct ath5k_tx_status { 515 u16 ts_seqnum; 516 u16 ts_tstamp; 517 u8 ts_status; 518 u8 ts_final_idx; 519 u8 ts_final_retry; 520 s8 ts_rssi; 521 u8 ts_shortretry; 522 u8 ts_virtcol; 523 u8 ts_antenna; 524 }; 525 526 #define AR5K_TXSTAT_ALTRATE 0x80 527 #define AR5K_TXERR_XRETRY 0x01 528 #define AR5K_TXERR_FILT 0x02 529 #define AR5K_TXERR_FIFO 0x04 530 531 /** 532 * enum ath5k_tx_queue - Queue types used to classify tx queues. 533 * @AR5K_TX_QUEUE_INACTIVE: q is unused -- see ath5k_hw_release_tx_queue 534 * @AR5K_TX_QUEUE_DATA: A normal data queue 535 * @AR5K_TX_QUEUE_BEACON: The beacon queue 536 * @AR5K_TX_QUEUE_CAB: The after-beacon queue 537 * @AR5K_TX_QUEUE_UAPSD: Unscheduled Automatic Power Save Delivery queue 538 */ 539 enum ath5k_tx_queue { 540 AR5K_TX_QUEUE_INACTIVE = 0, 541 AR5K_TX_QUEUE_DATA, 542 AR5K_TX_QUEUE_BEACON, 543 AR5K_TX_QUEUE_CAB, 544 AR5K_TX_QUEUE_UAPSD, 545 }; 546 547 #define AR5K_NUM_TX_QUEUES 10 548 #define AR5K_NUM_TX_QUEUES_NOQCU 2 549 550 /** 551 * enum ath5k_tx_queue_subtype - Queue sub-types to classify normal data queues 552 * @AR5K_WME_AC_BK: Background traffic 553 * @AR5K_WME_AC_BE: Best-effort (normal) traffic 554 * @AR5K_WME_AC_VI: Video traffic 555 * @AR5K_WME_AC_VO: Voice traffic 556 * 557 * These are the 4 Access Categories as defined in 558 * WME spec. 0 is the lowest priority and 4 is the 559 * highest. Normal data that hasn't been classified 560 * goes to the Best Effort AC. 561 */ 562 enum ath5k_tx_queue_subtype { 563 AR5K_WME_AC_BK = 0, 564 AR5K_WME_AC_BE, 565 AR5K_WME_AC_VI, 566 AR5K_WME_AC_VO, 567 }; 568 569 /** 570 * enum ath5k_tx_queue_id - Queue ID numbers as returned by the hw functions 571 * @AR5K_TX_QUEUE_ID_NOQCU_DATA: Data queue on AR5210 (no QCU available) 572 * @AR5K_TX_QUEUE_ID_NOQCU_BEACON: Beacon queue on AR5210 (no QCU available) 573 * @AR5K_TX_QUEUE_ID_DATA_MIN: Data queue min index 574 * @AR5K_TX_QUEUE_ID_DATA_MAX: Data queue max index 575 * @AR5K_TX_QUEUE_ID_CAB: Content after beacon queue 576 * @AR5K_TX_QUEUE_ID_BEACON: Beacon queue 577 * @AR5K_TX_QUEUE_ID_UAPSD: Urgent Automatic Power Save Delivery, 578 * 579 * Each number represents a hw queue. If hw does not support hw queues 580 * (eg 5210) all data goes in one queue. 581 */ 582 enum ath5k_tx_queue_id { 583 AR5K_TX_QUEUE_ID_NOQCU_DATA = 0, 584 AR5K_TX_QUEUE_ID_NOQCU_BEACON = 1, 585 AR5K_TX_QUEUE_ID_DATA_MIN = 0, 586 AR5K_TX_QUEUE_ID_DATA_MAX = 3, 587 AR5K_TX_QUEUE_ID_UAPSD = 7, 588 AR5K_TX_QUEUE_ID_CAB = 8, 589 AR5K_TX_QUEUE_ID_BEACON = 9, 590 }; 591 592 /* 593 * Flags to set hw queue's parameters... 594 */ 595 #define AR5K_TXQ_FLAG_TXOKINT_ENABLE 0x0001 /* Enable TXOK interrupt */ 596 #define AR5K_TXQ_FLAG_TXERRINT_ENABLE 0x0002 /* Enable TXERR interrupt */ 597 #define AR5K_TXQ_FLAG_TXEOLINT_ENABLE 0x0004 /* Enable TXEOL interrupt -not used- */ 598 #define AR5K_TXQ_FLAG_TXDESCINT_ENABLE 0x0008 /* Enable TXDESC interrupt -not used- */ 599 #define AR5K_TXQ_FLAG_TXURNINT_ENABLE 0x0010 /* Enable TXURN interrupt */ 600 #define AR5K_TXQ_FLAG_CBRORNINT_ENABLE 0x0020 /* Enable CBRORN interrupt */ 601 #define AR5K_TXQ_FLAG_CBRURNINT_ENABLE 0x0040 /* Enable CBRURN interrupt */ 602 #define AR5K_TXQ_FLAG_QTRIGINT_ENABLE 0x0080 /* Enable QTRIG interrupt */ 603 #define AR5K_TXQ_FLAG_TXNOFRMINT_ENABLE 0x0100 /* Enable TXNOFRM interrupt */ 604 #define AR5K_TXQ_FLAG_BACKOFF_DISABLE 0x0200 /* Disable random post-backoff */ 605 #define AR5K_TXQ_FLAG_RDYTIME_EXP_POLICY_ENABLE 0x0300 /* Enable ready time expiry policy (?)*/ 606 #define AR5K_TXQ_FLAG_FRAG_BURST_BACKOFF_ENABLE 0x0800 /* Enable backoff while bursting */ 607 #define AR5K_TXQ_FLAG_POST_FR_BKOFF_DIS 0x1000 /* Disable backoff while bursting */ 608 #define AR5K_TXQ_FLAG_COMPRESSION_ENABLE 0x2000 /* Enable hw compression -not implemented-*/ 609 610 /** 611 * struct ath5k_txq - Transmit queue state 612 * @qnum: Hardware q number 613 * @link: Link ptr in last TX desc 614 * @q: Transmit queue (&struct list_head) 615 * @lock: Lock on q and link 616 * @setup: Is the queue configured 617 * @txq_len:Number of queued buffers 618 * @txq_max: Max allowed num of queued buffers 619 * @txq_poll_mark: Used to check if queue got stuck 620 * @txq_stuck: Queue stuck counter 621 * 622 * One of these exists for each hardware transmit queue. 623 * Packets sent to us from above are assigned to queues based 624 * on their priority. Not all devices support a complete set 625 * of hardware transmit queues. For those devices the array 626 * sc_ac2q will map multiple priorities to fewer hardware queues 627 * (typically all to one hardware queue). 628 */ 629 struct ath5k_txq { 630 unsigned int qnum; 631 u32 *link; 632 struct list_head q; 633 spinlock_t lock; 634 bool setup; 635 int txq_len; 636 int txq_max; 637 bool txq_poll_mark; 638 unsigned int txq_stuck; 639 }; 640 641 /** 642 * struct ath5k_txq_info - A struct to hold TX queue's parameters 643 * @tqi_type: One of enum ath5k_tx_queue 644 * @tqi_subtype: One of enum ath5k_tx_queue_subtype 645 * @tqi_flags: TX queue flags (see above) 646 * @tqi_aifs: Arbitrated Inter-frame Space 647 * @tqi_cw_min: Minimum Contention Window 648 * @tqi_cw_max: Maximum Contention Window 649 * @tqi_cbr_period: Constant bit rate period 650 * @tqi_ready_time: Time queue waits after an event when RDYTIME is enabled 651 */ 652 struct ath5k_txq_info { 653 enum ath5k_tx_queue tqi_type; 654 enum ath5k_tx_queue_subtype tqi_subtype; 655 u16 tqi_flags; 656 u8 tqi_aifs; 657 u16 tqi_cw_min; 658 u16 tqi_cw_max; 659 u32 tqi_cbr_period; 660 u32 tqi_cbr_overflow_limit; 661 u32 tqi_burst_time; 662 u32 tqi_ready_time; 663 }; 664 665 /** 666 * enum ath5k_pkt_type - Transmit packet types 667 * @AR5K_PKT_TYPE_NORMAL: Normal data 668 * @AR5K_PKT_TYPE_ATIM: ATIM 669 * @AR5K_PKT_TYPE_PSPOLL: PS-Poll 670 * @AR5K_PKT_TYPE_BEACON: Beacon 671 * @AR5K_PKT_TYPE_PROBE_RESP: Probe response 672 * @AR5K_PKT_TYPE_PIFS: PIFS 673 * Used on tx control descriptor 674 */ 675 enum ath5k_pkt_type { 676 AR5K_PKT_TYPE_NORMAL = 0, 677 AR5K_PKT_TYPE_ATIM = 1, 678 AR5K_PKT_TYPE_PSPOLL = 2, 679 AR5K_PKT_TYPE_BEACON = 3, 680 AR5K_PKT_TYPE_PROBE_RESP = 4, 681 AR5K_PKT_TYPE_PIFS = 5, 682 }; 683 684 /* 685 * TX power and TPC settings 686 */ 687 #define AR5K_TXPOWER_OFDM(_r, _v) ( \ 688 ((0 & 1) << ((_v) + 6)) | \ 689 (((ah->ah_txpower.txp_rates_power_table[(_r)]) & 0x3f) << (_v)) \ 690 ) 691 692 #define AR5K_TXPOWER_CCK(_r, _v) ( \ 693 (ah->ah_txpower.txp_rates_power_table[(_r)] & 0x3f) << (_v) \ 694 ) 695 696 697 698 /****************\ 699 RX DEFINITIONS 700 \****************/ 701 702 /** 703 * struct ath5k_rx_status - RX Status descriptor 704 * @rs_datalen: Data length 705 * @rs_tstamp: Timestamp 706 * @rs_status: Status code 707 * @rs_phyerr: PHY error mask 708 * @rs_rssi: RSSI in 0.5dbm units 709 * @rs_keyix: Index to the key used for decrypting 710 * @rs_rate: Rate used to decode the frame 711 * @rs_antenna: Antenna used to receive the frame 712 * @rs_more: Indicates this is a frame fragment (Fast frames) 713 */ 714 struct ath5k_rx_status { 715 u16 rs_datalen; 716 u16 rs_tstamp; 717 u8 rs_status; 718 u8 rs_phyerr; 719 s8 rs_rssi; 720 u8 rs_keyix; 721 u8 rs_rate; 722 u8 rs_antenna; 723 u8 rs_more; 724 }; 725 726 #define AR5K_RXERR_CRC 0x01 727 #define AR5K_RXERR_PHY 0x02 728 #define AR5K_RXERR_FIFO 0x04 729 #define AR5K_RXERR_DECRYPT 0x08 730 #define AR5K_RXERR_MIC 0x10 731 #define AR5K_RXKEYIX_INVALID ((u8) -1) 732 #define AR5K_TXKEYIX_INVALID ((u32) -1) 733 734 735 /**************************\ 736 BEACON TIMERS DEFINITIONS 737 \**************************/ 738 739 #define AR5K_BEACON_PERIOD 0x0000ffff 740 #define AR5K_BEACON_ENA 0x00800000 /*enable beacon xmit*/ 741 #define AR5K_BEACON_RESET_TSF 0x01000000 /*force a TSF reset*/ 742 743 744 /* 745 * TSF to TU conversion: 746 * 747 * TSF is a 64bit value in usec (microseconds). 748 * TU is a 32bit value and defined by IEEE802.11 (page 6) as "A measurement of 749 * time equal to 1024 usec", so it's roughly milliseconds (usec / 1024). 750 */ 751 #define TSF_TO_TU(_tsf) (u32)((_tsf) >> 10) 752 753 754 755 /*******************************\ 756 GAIN OPTIMIZATION DEFINITIONS 757 \*******************************/ 758 759 /** 760 * enum ath5k_rfgain - RF Gain optimization engine state 761 * @AR5K_RFGAIN_INACTIVE: Engine disabled 762 * @AR5K_RFGAIN_ACTIVE: Probe active 763 * @AR5K_RFGAIN_READ_REQUESTED: Probe requested 764 * @AR5K_RFGAIN_NEED_CHANGE: Gain_F needs change 765 */ 766 enum ath5k_rfgain { 767 AR5K_RFGAIN_INACTIVE = 0, 768 AR5K_RFGAIN_ACTIVE, 769 AR5K_RFGAIN_READ_REQUESTED, 770 AR5K_RFGAIN_NEED_CHANGE, 771 }; 772 773 /** 774 * struct ath5k_gain - RF Gain optimization engine state data 775 * @g_step_idx: Current step index 776 * @g_current: Current gain 777 * @g_target: Target gain 778 * @g_low: Low gain boundary 779 * @g_high: High gain boundary 780 * @g_f_corr: Gain_F correction 781 * @g_state: One of enum ath5k_rfgain 782 */ 783 struct ath5k_gain { 784 u8 g_step_idx; 785 u8 g_current; 786 u8 g_target; 787 u8 g_low; 788 u8 g_high; 789 u8 g_f_corr; 790 u8 g_state; 791 }; 792 793 794 795 /********************\ 796 COMMON DEFINITIONS 797 \********************/ 798 799 #define AR5K_SLOT_TIME_9 396 800 #define AR5K_SLOT_TIME_20 880 801 #define AR5K_SLOT_TIME_MAX 0xffff 802 803 /** 804 * struct ath5k_athchan_2ghz - 2GHz to 5GHZ map for RF5111 805 * @a2_flags: Channel flags (internal) 806 * @a2_athchan: HW channel number (internal) 807 * 808 * This structure is used to map 2GHz channels to 809 * 5GHz Atheros channels on 2111 frequency converter 810 * that comes together with RF5111 811 * TODO: Clean up 812 */ 813 struct ath5k_athchan_2ghz { 814 u32 a2_flags; 815 u16 a2_athchan; 816 }; 817 818 /** 819 * enum ath5k_dmasize - DMA size definitions (2^(n+2)) 820 * @AR5K_DMASIZE_4B: 4Bytes 821 * @AR5K_DMASIZE_8B: 8Bytes 822 * @AR5K_DMASIZE_16B: 16Bytes 823 * @AR5K_DMASIZE_32B: 32Bytes 824 * @AR5K_DMASIZE_64B: 64Bytes (Default) 825 * @AR5K_DMASIZE_128B: 128Bytes 826 * @AR5K_DMASIZE_256B: 256Bytes 827 * @AR5K_DMASIZE_512B: 512Bytes 828 * 829 * These are used to set DMA burst size on hw 830 * 831 * Note: Some platforms can't handle more than 4Bytes 832 * be careful on embedded boards. 833 */ 834 enum ath5k_dmasize { 835 AR5K_DMASIZE_4B = 0, 836 AR5K_DMASIZE_8B, 837 AR5K_DMASIZE_16B, 838 AR5K_DMASIZE_32B, 839 AR5K_DMASIZE_64B, 840 AR5K_DMASIZE_128B, 841 AR5K_DMASIZE_256B, 842 AR5K_DMASIZE_512B 843 }; 844 845 846 847 /******************\ 848 RATE DEFINITIONS 849 \******************/ 850 851 /** 852 * DOC: Rate codes 853 * 854 * Seems the ar5xxx hardware supports up to 32 rates, indexed by 1-32. 855 * 856 * The rate code is used to get the RX rate or set the TX rate on the 857 * hardware descriptors. It is also used for internal modulation control 858 * and settings. 859 * 860 * This is the hardware rate map we are aware of (html unfriendly): 861 * 862 * Rate code Rate (Kbps) 863 * --------- ----------- 864 * 0x01 3000 (XR) 865 * 0x02 1000 (XR) 866 * 0x03 250 (XR) 867 * 0x04 - 05 -Reserved- 868 * 0x06 2000 (XR) 869 * 0x07 500 (XR) 870 * 0x08 48000 (OFDM) 871 * 0x09 24000 (OFDM) 872 * 0x0A 12000 (OFDM) 873 * 0x0B 6000 (OFDM) 874 * 0x0C 54000 (OFDM) 875 * 0x0D 36000 (OFDM) 876 * 0x0E 18000 (OFDM) 877 * 0x0F 9000 (OFDM) 878 * 0x10 - 17 -Reserved- 879 * 0x18 11000L (CCK) 880 * 0x19 5500L (CCK) 881 * 0x1A 2000L (CCK) 882 * 0x1B 1000L (CCK) 883 * 0x1C 11000S (CCK) 884 * 0x1D 5500S (CCK) 885 * 0x1E 2000S (CCK) 886 * 0x1F -Reserved- 887 * 888 * "S" indicates CCK rates with short preamble and "L" with long preamble. 889 * 890 * AR5211 has different rate codes for CCK (802.11B) rates. It only uses the 891 * lowest 4 bits, so they are the same as above with a 0xF mask. 892 * (0xB, 0xA, 0x9 and 0x8 for 1M, 2M, 5.5M and 11M). 893 * We handle this in ath5k_setup_bands(). 894 */ 895 #define AR5K_MAX_RATES 32 896 897 /* B */ 898 #define ATH5K_RATE_CODE_1M 0x1B 899 #define ATH5K_RATE_CODE_2M 0x1A 900 #define ATH5K_RATE_CODE_5_5M 0x19 901 #define ATH5K_RATE_CODE_11M 0x18 902 /* A and G */ 903 #define ATH5K_RATE_CODE_6M 0x0B 904 #define ATH5K_RATE_CODE_9M 0x0F 905 #define ATH5K_RATE_CODE_12M 0x0A 906 #define ATH5K_RATE_CODE_18M 0x0E 907 #define ATH5K_RATE_CODE_24M 0x09 908 #define ATH5K_RATE_CODE_36M 0x0D 909 #define ATH5K_RATE_CODE_48M 0x08 910 #define ATH5K_RATE_CODE_54M 0x0C 911 912 /* Adding this flag to rate_code on B rates 913 * enables short preamble */ 914 #define AR5K_SET_SHORT_PREAMBLE 0x04 915 916 /* 917 * Crypto definitions 918 */ 919 920 #define AR5K_KEYCACHE_SIZE 8 921 extern bool ath5k_modparam_nohwcrypt; 922 923 /***********************\ 924 HW RELATED DEFINITIONS 925 \***********************/ 926 927 /* 928 * Misc definitions 929 */ 930 #define AR5K_RSSI_EP_MULTIPLIER (1 << 7) 931 932 #define AR5K_ASSERT_ENTRY(_e, _s) do { \ 933 if (_e >= _s) \ 934 return false; \ 935 } while (0) 936 937 /* 938 * Hardware interrupt abstraction 939 */ 940 941 /** 942 * enum ath5k_int - Hardware interrupt masks helpers 943 * @AR5K_INT_RXOK: Frame successfully received 944 * @AR5K_INT_RXDESC: Request RX descriptor/Read RX descriptor 945 * @AR5K_INT_RXERR: Frame reception failed 946 * @AR5K_INT_RXNOFRM: No frame received within a specified time period 947 * @AR5K_INT_RXEOL: Reached "End Of List", means we need more RX descriptors 948 * @AR5K_INT_RXORN: Indicates we got RX FIFO overrun. Note that Rx overrun is 949 * not always fatal, on some chips we can continue operation 950 * without resetting the card, that's why %AR5K_INT_FATAL is not 951 * common for all chips. 952 * @AR5K_INT_RX_ALL: Mask to identify all RX related interrupts 953 * 954 * @AR5K_INT_TXOK: Frame transmission success 955 * @AR5K_INT_TXDESC: Request TX descriptor/Read TX status descriptor 956 * @AR5K_INT_TXERR: Frame transmission failure 957 * @AR5K_INT_TXEOL: Received End Of List for VEOL (Virtual End Of List). The 958 * Queue Control Unit (QCU) signals an EOL interrupt only if a 959 * descriptor's LinkPtr is NULL. For more details, refer to: 960 * "http://www.freepatentsonline.com/20030225739.html" 961 * @AR5K_INT_TXNOFRM: No frame was transmitted within a specified time period 962 * @AR5K_INT_TXURN: Indicates we got TX FIFO underrun. In such case we should 963 * increase the TX trigger threshold. 964 * @AR5K_INT_TX_ALL: Mask to identify all TX related interrupts 965 * 966 * @AR5K_INT_MIB: Indicates the either Management Information Base counters or 967 * one of the PHY error counters reached the maximum value and 968 * should be read and cleared. 969 * @AR5K_INT_SWI: Software triggered interrupt. 970 * @AR5K_INT_RXPHY: RX PHY Error 971 * @AR5K_INT_RXKCM: RX Key cache miss 972 * @AR5K_INT_SWBA: SoftWare Beacon Alert - indicates its time to send a 973 * beacon that must be handled in software. The alternative is if 974 * you have VEOL support, in that case you let the hardware deal 975 * with things. 976 * @AR5K_INT_BRSSI: Beacon received with an RSSI value below our threshold 977 * @AR5K_INT_BMISS: If in STA mode this indicates we have stopped seeing 978 * beacons from the AP have associated with, we should probably 979 * try to reassociate. When in IBSS mode this might mean we have 980 * not received any beacons from any local stations. Note that 981 * every station in an IBSS schedules to send beacons at the 982 * Target Beacon Transmission Time (TBTT) with a random backoff. 983 * @AR5K_INT_BNR: Beacon queue got triggered (DMA beacon alert) while empty. 984 * @AR5K_INT_TIM: Beacon with local station's TIM bit set 985 * @AR5K_INT_DTIM: Beacon with DTIM bit and zero DTIM count received 986 * @AR5K_INT_DTIM_SYNC: DTIM sync lost 987 * @AR5K_INT_GPIO: GPIO interrupt is used for RF Kill switches connected to 988 * our GPIO pins. 989 * @AR5K_INT_BCN_TIMEOUT: Beacon timeout, we waited after TBTT but got noting 990 * @AR5K_INT_CAB_TIMEOUT: We waited for CAB traffic after the beacon but got 991 * nothing or an incomplete CAB frame sequence. 992 * @AR5K_INT_QCBRORN: A queue got it's CBR counter expired 993 * @AR5K_INT_QCBRURN: A queue got triggered wile empty 994 * @AR5K_INT_QTRIG: A queue got triggered 995 * 996 * @AR5K_INT_FATAL: Fatal errors were encountered, typically caused by bus/DMA 997 * errors. Indicates we need to reset the card. 998 * @AR5K_INT_GLOBAL: Used to clear and set the IER 999 * @AR5K_INT_NOCARD: Signals the card has been removed 1000 * @AR5K_INT_COMMON: Common interrupts shared among MACs with the same 1001 * bit value 1002 * 1003 * These are mapped to take advantage of some common bits 1004 * between the MACs, to be able to set intr properties 1005 * easier. Some of them are not used yet inside hw.c. Most map 1006 * to the respective hw interrupt value as they are common among different 1007 * MACs. 1008 */ 1009 enum ath5k_int { 1010 AR5K_INT_RXOK = 0x00000001, 1011 AR5K_INT_RXDESC = 0x00000002, 1012 AR5K_INT_RXERR = 0x00000004, 1013 AR5K_INT_RXNOFRM = 0x00000008, 1014 AR5K_INT_RXEOL = 0x00000010, 1015 AR5K_INT_RXORN = 0x00000020, 1016 AR5K_INT_TXOK = 0x00000040, 1017 AR5K_INT_TXDESC = 0x00000080, 1018 AR5K_INT_TXERR = 0x00000100, 1019 AR5K_INT_TXNOFRM = 0x00000200, 1020 AR5K_INT_TXEOL = 0x00000400, 1021 AR5K_INT_TXURN = 0x00000800, 1022 AR5K_INT_MIB = 0x00001000, 1023 AR5K_INT_SWI = 0x00002000, 1024 AR5K_INT_RXPHY = 0x00004000, 1025 AR5K_INT_RXKCM = 0x00008000, 1026 AR5K_INT_SWBA = 0x00010000, 1027 AR5K_INT_BRSSI = 0x00020000, 1028 AR5K_INT_BMISS = 0x00040000, 1029 AR5K_INT_FATAL = 0x00080000, /* Non common */ 1030 AR5K_INT_BNR = 0x00100000, /* Non common */ 1031 AR5K_INT_TIM = 0x00200000, /* Non common */ 1032 AR5K_INT_DTIM = 0x00400000, /* Non common */ 1033 AR5K_INT_DTIM_SYNC = 0x00800000, /* Non common */ 1034 AR5K_INT_GPIO = 0x01000000, 1035 AR5K_INT_BCN_TIMEOUT = 0x02000000, /* Non common */ 1036 AR5K_INT_CAB_TIMEOUT = 0x04000000, /* Non common */ 1037 AR5K_INT_QCBRORN = 0x08000000, /* Non common */ 1038 AR5K_INT_QCBRURN = 0x10000000, /* Non common */ 1039 AR5K_INT_QTRIG = 0x20000000, /* Non common */ 1040 AR5K_INT_GLOBAL = 0x80000000, 1041 1042 AR5K_INT_TX_ALL = AR5K_INT_TXOK 1043 | AR5K_INT_TXDESC 1044 | AR5K_INT_TXERR 1045 | AR5K_INT_TXNOFRM 1046 | AR5K_INT_TXEOL 1047 | AR5K_INT_TXURN, 1048 1049 AR5K_INT_RX_ALL = AR5K_INT_RXOK 1050 | AR5K_INT_RXDESC 1051 | AR5K_INT_RXERR 1052 | AR5K_INT_RXNOFRM 1053 | AR5K_INT_RXEOL 1054 | AR5K_INT_RXORN, 1055 1056 AR5K_INT_COMMON = AR5K_INT_RXOK 1057 | AR5K_INT_RXDESC 1058 | AR5K_INT_RXERR 1059 | AR5K_INT_RXNOFRM 1060 | AR5K_INT_RXEOL 1061 | AR5K_INT_RXORN 1062 | AR5K_INT_TXOK 1063 | AR5K_INT_TXDESC 1064 | AR5K_INT_TXERR 1065 | AR5K_INT_TXNOFRM 1066 | AR5K_INT_TXEOL 1067 | AR5K_INT_TXURN 1068 | AR5K_INT_MIB 1069 | AR5K_INT_SWI 1070 | AR5K_INT_RXPHY 1071 | AR5K_INT_RXKCM 1072 | AR5K_INT_SWBA 1073 | AR5K_INT_BRSSI 1074 | AR5K_INT_BMISS 1075 | AR5K_INT_GPIO 1076 | AR5K_INT_GLOBAL, 1077 1078 AR5K_INT_NOCARD = 0xffffffff 1079 }; 1080 1081 /** 1082 * enum ath5k_calibration_mask - Mask which calibration is active at the moment 1083 * @AR5K_CALIBRATION_FULL: Full calibration (AGC + SHORT) 1084 * @AR5K_CALIBRATION_SHORT: Short calibration (NF + I/Q) 1085 * @AR5K_CALIBRATION_NF: Noise Floor calibration 1086 * @AR5K_CALIBRATION_ANI: Adaptive Noise Immunity 1087 */ 1088 enum ath5k_calibration_mask { 1089 AR5K_CALIBRATION_FULL = 0x01, 1090 AR5K_CALIBRATION_SHORT = 0x02, 1091 AR5K_CALIBRATION_NF = 0x04, 1092 AR5K_CALIBRATION_ANI = 0x08, 1093 }; 1094 1095 /** 1096 * enum ath5k_power_mode - Power management modes 1097 * @AR5K_PM_UNDEFINED: Undefined 1098 * @AR5K_PM_AUTO: Allow card to sleep if possible 1099 * @AR5K_PM_AWAKE: Force card to wake up 1100 * @AR5K_PM_FULL_SLEEP: Force card to full sleep (DANGEROUS) 1101 * @AR5K_PM_NETWORK_SLEEP: Allow to sleep for a specified duration 1102 * 1103 * Currently only PM_AWAKE is used, FULL_SLEEP and NETWORK_SLEEP/AUTO 1104 * are also known to have problems on some cards. This is not a big 1105 * problem though because we can have almost the same effect as 1106 * FULL_SLEEP by putting card on warm reset (it's almost powered down). 1107 */ 1108 enum ath5k_power_mode { 1109 AR5K_PM_UNDEFINED = 0, 1110 AR5K_PM_AUTO, 1111 AR5K_PM_AWAKE, 1112 AR5K_PM_FULL_SLEEP, 1113 AR5K_PM_NETWORK_SLEEP, 1114 }; 1115 1116 /* 1117 * These match net80211 definitions (not used in 1118 * mac80211). 1119 * TODO: Clean this up 1120 */ 1121 #define AR5K_LED_INIT 0 /*IEEE80211_S_INIT*/ 1122 #define AR5K_LED_SCAN 1 /*IEEE80211_S_SCAN*/ 1123 #define AR5K_LED_AUTH 2 /*IEEE80211_S_AUTH*/ 1124 #define AR5K_LED_ASSOC 3 /*IEEE80211_S_ASSOC*/ 1125 #define AR5K_LED_RUN 4 /*IEEE80211_S_RUN*/ 1126 1127 /* GPIO-controlled software LED */ 1128 #define AR5K_SOFTLED_PIN 0 1129 #define AR5K_SOFTLED_ON 0 1130 #define AR5K_SOFTLED_OFF 1 1131 1132 1133 /* XXX: we *may* move cap_range stuff to struct wiphy */ 1134 struct ath5k_capabilities { 1135 /* 1136 * Supported PHY modes 1137 * (ie. AR5K_MODE_11A, AR5K_MODE_11B, ...) 1138 */ 1139 DECLARE_BITMAP(cap_mode, AR5K_MODE_MAX); 1140 1141 /* 1142 * Frequency range (without regulation restrictions) 1143 */ 1144 struct { 1145 u16 range_2ghz_min; 1146 u16 range_2ghz_max; 1147 u16 range_5ghz_min; 1148 u16 range_5ghz_max; 1149 } cap_range; 1150 1151 /* 1152 * Values stored in the EEPROM (some of them...) 1153 */ 1154 struct ath5k_eeprom_info cap_eeprom; 1155 1156 /* 1157 * Queue information 1158 */ 1159 struct { 1160 u8 q_tx_num; 1161 } cap_queues; 1162 1163 bool cap_has_phyerr_counters; 1164 bool cap_has_mrr_support; 1165 bool cap_needs_2GHz_ovr; 1166 }; 1167 1168 /* size of noise floor history (keep it a power of two) */ 1169 #define ATH5K_NF_CAL_HIST_MAX 8 1170 struct ath5k_nfcal_hist { 1171 s16 index; /* current index into nfval */ 1172 s16 nfval[ATH5K_NF_CAL_HIST_MAX]; /* last few noise floors */ 1173 }; 1174 1175 #define ATH5K_LED_MAX_NAME_LEN 31 1176 1177 /* 1178 * State for LED triggers 1179 */ 1180 struct ath5k_led { 1181 char name[ATH5K_LED_MAX_NAME_LEN + 1]; /* name of the LED in sysfs */ 1182 struct ath5k_hw *ah; /* driver state */ 1183 struct led_classdev led_dev; /* led classdev */ 1184 }; 1185 1186 /* Rfkill */ 1187 struct ath5k_rfkill { 1188 /* GPIO PIN for rfkill */ 1189 u16 gpio; 1190 /* polarity of rfkill GPIO PIN */ 1191 bool polarity; 1192 /* RFKILL toggle tasklet */ 1193 struct tasklet_struct toggleq; 1194 }; 1195 1196 /* statistics */ 1197 struct ath5k_statistics { 1198 /* antenna use */ 1199 unsigned int antenna_rx[5]; /* frames count per antenna RX */ 1200 unsigned int antenna_tx[5]; /* frames count per antenna TX */ 1201 1202 /* frame errors */ 1203 unsigned int rx_all_count; /* all RX frames, including errors */ 1204 unsigned int tx_all_count; /* all TX frames, including errors */ 1205 unsigned int rx_bytes_count; /* all RX bytes, including errored pkts 1206 * and the MAC headers for each packet 1207 */ 1208 unsigned int tx_bytes_count; /* all TX bytes, including errored pkts 1209 * and the MAC headers and padding for 1210 * each packet. 1211 */ 1212 unsigned int rxerr_crc; 1213 unsigned int rxerr_phy; 1214 unsigned int rxerr_phy_code[32]; 1215 unsigned int rxerr_fifo; 1216 unsigned int rxerr_decrypt; 1217 unsigned int rxerr_mic; 1218 unsigned int rxerr_proc; 1219 unsigned int rxerr_jumbo; 1220 unsigned int txerr_retry; 1221 unsigned int txerr_fifo; 1222 unsigned int txerr_filt; 1223 1224 /* MIB counters */ 1225 unsigned int ack_fail; 1226 unsigned int rts_fail; 1227 unsigned int rts_ok; 1228 unsigned int fcs_error; 1229 unsigned int beacons; 1230 1231 unsigned int mib_intr; 1232 unsigned int rxorn_intr; 1233 unsigned int rxeol_intr; 1234 }; 1235 1236 /* 1237 * Misc defines 1238 */ 1239 1240 #define AR5K_MAX_GPIO 10 1241 #define AR5K_MAX_RF_BANKS 8 1242 1243 #if CHAN_DEBUG 1244 #define ATH_CHAN_MAX (26 + 26 + 26 + 200 + 200) 1245 #else 1246 #define ATH_CHAN_MAX (14 + 14 + 14 + 252 + 20) 1247 #endif 1248 1249 #define ATH_RXBUF 40 /* number of RX buffers */ 1250 #define ATH_TXBUF 200 /* number of TX buffers */ 1251 #define ATH_BCBUF 4 /* number of beacon buffers */ 1252 #define ATH5K_TXQ_LEN_MAX (ATH_TXBUF / 4) /* bufs per queue */ 1253 #define ATH5K_TXQ_LEN_LOW (ATH5K_TXQ_LEN_MAX / 2) /* low mark */ 1254 1255 /* Driver state associated with an instance of a device */ 1256 struct ath5k_hw { 1257 struct ath_common common; 1258 1259 struct pci_dev *pdev; 1260 struct device *dev; /* for dma mapping */ 1261 int irq; 1262 u16 devid; 1263 void __iomem *iobase; /* address of the device */ 1264 struct mutex lock; /* dev-level lock */ 1265 struct ieee80211_hw *hw; /* IEEE 802.11 common */ 1266 struct ieee80211_supported_band sbands[IEEE80211_NUM_BANDS]; 1267 struct ieee80211_channel channels[ATH_CHAN_MAX]; 1268 struct ieee80211_rate rates[IEEE80211_NUM_BANDS][AR5K_MAX_RATES]; 1269 s8 rate_idx[IEEE80211_NUM_BANDS][AR5K_MAX_RATES]; 1270 enum nl80211_iftype opmode; 1271 1272 #ifdef CONFIG_ATH5K_DEBUG 1273 struct ath5k_dbg_info debug; /* debug info */ 1274 #endif /* CONFIG_ATH5K_DEBUG */ 1275 1276 struct ath5k_buf *bufptr; /* allocated buffer ptr */ 1277 struct ath5k_desc *desc; /* TX/RX descriptors */ 1278 dma_addr_t desc_daddr; /* DMA (physical) address */ 1279 size_t desc_len; /* size of TX/RX descriptors */ 1280 1281 DECLARE_BITMAP(status, 4); 1282 #define ATH_STAT_INVALID 0 /* disable hardware accesses */ 1283 #define ATH_STAT_PROMISC 1 1284 #define ATH_STAT_LEDSOFT 2 /* enable LED gpio status */ 1285 #define ATH_STAT_STARTED 3 /* opened & irqs enabled */ 1286 1287 unsigned int filter_flags; /* HW flags, AR5K_RX_FILTER_* */ 1288 unsigned int fif_filter_flags; /* Current FIF_* filter flags */ 1289 struct ieee80211_channel *curchan; /* current h/w channel */ 1290 1291 u16 nvifs; 1292 1293 enum ath5k_int imask; /* interrupt mask copy */ 1294 1295 spinlock_t irqlock; 1296 bool rx_pending; /* rx tasklet pending */ 1297 bool tx_pending; /* tx tasklet pending */ 1298 1299 u8 bssidmask[ETH_ALEN]; 1300 1301 unsigned int led_pin, /* GPIO pin for driving LED */ 1302 led_on; /* pin setting for LED on */ 1303 1304 struct work_struct reset_work; /* deferred chip reset */ 1305 struct work_struct calib_work; /* deferred phy calibration */ 1306 1307 struct list_head rxbuf; /* receive buffer */ 1308 spinlock_t rxbuflock; 1309 u32 *rxlink; /* link ptr in last RX desc */ 1310 struct tasklet_struct rxtq; /* rx intr tasklet */ 1311 struct ath5k_led rx_led; /* rx led */ 1312 1313 struct list_head txbuf; /* transmit buffer */ 1314 spinlock_t txbuflock; 1315 unsigned int txbuf_len; /* buf count in txbuf list */ 1316 struct ath5k_txq txqs[AR5K_NUM_TX_QUEUES]; /* tx queues */ 1317 struct tasklet_struct txtq; /* tx intr tasklet */ 1318 struct ath5k_led tx_led; /* tx led */ 1319 1320 struct ath5k_rfkill rf_kill; 1321 1322 spinlock_t block; /* protects beacon */ 1323 struct tasklet_struct beacontq; /* beacon intr tasklet */ 1324 struct list_head bcbuf; /* beacon buffer */ 1325 struct ieee80211_vif *bslot[ATH_BCBUF]; 1326 u16 num_ap_vifs; 1327 u16 num_adhoc_vifs; 1328 u16 num_mesh_vifs; 1329 unsigned int bhalq, /* SW q for outgoing beacons */ 1330 bmisscount, /* missed beacon transmits */ 1331 bintval, /* beacon interval in TU */ 1332 bsent; 1333 unsigned int nexttbtt; /* next beacon time in TU */ 1334 struct ath5k_txq *cabq; /* content after beacon */ 1335 1336 bool assoc; /* associate state */ 1337 bool enable_beacon; /* true if beacons are on */ 1338 1339 struct ath5k_statistics stats; 1340 1341 struct ath5k_ani_state ani_state; 1342 struct tasklet_struct ani_tasklet; /* ANI calibration */ 1343 1344 struct delayed_work tx_complete_work; 1345 1346 struct survey_info survey; /* collected survey info */ 1347 1348 enum ath5k_int ah_imr; 1349 1350 struct ieee80211_channel *ah_current_channel; 1351 bool ah_iq_cal_needed; 1352 bool ah_single_chip; 1353 1354 enum ath5k_version ah_version; 1355 enum ath5k_radio ah_radio; 1356 u32 ah_mac_srev; 1357 u16 ah_mac_version; 1358 u16 ah_phy_revision; 1359 u16 ah_radio_5ghz_revision; 1360 u16 ah_radio_2ghz_revision; 1361 1362 #define ah_modes ah_capabilities.cap_mode 1363 #define ah_ee_version ah_capabilities.cap_eeprom.ee_version 1364 1365 u8 ah_retry_long; 1366 u8 ah_retry_short; 1367 1368 u32 ah_use_32khz_clock; 1369 1370 u8 ah_coverage_class; 1371 bool ah_ack_bitrate_high; 1372 u8 ah_bwmode; 1373 bool ah_short_slot; 1374 1375 /* Antenna Control */ 1376 u32 ah_ant_ctl[AR5K_EEPROM_N_MODES][AR5K_ANT_MAX]; 1377 u8 ah_ant_mode; 1378 u8 ah_tx_ant; 1379 u8 ah_def_ant; 1380 1381 struct ath5k_capabilities ah_capabilities; 1382 1383 struct ath5k_txq_info ah_txq[AR5K_NUM_TX_QUEUES]; 1384 u32 ah_txq_status; 1385 u32 ah_txq_imr_txok; 1386 u32 ah_txq_imr_txerr; 1387 u32 ah_txq_imr_txurn; 1388 u32 ah_txq_imr_txdesc; 1389 u32 ah_txq_imr_txeol; 1390 u32 ah_txq_imr_cbrorn; 1391 u32 ah_txq_imr_cbrurn; 1392 u32 ah_txq_imr_qtrig; 1393 u32 ah_txq_imr_nofrm; 1394 1395 u32 ah_txq_isr_txok_all; 1396 u32 ah_txq_isr_txurn; 1397 u32 ah_txq_isr_qcborn; 1398 u32 ah_txq_isr_qcburn; 1399 u32 ah_txq_isr_qtrig; 1400 1401 u32 *ah_rf_banks; 1402 size_t ah_rf_banks_size; 1403 size_t ah_rf_regs_count; 1404 struct ath5k_gain ah_gain; 1405 u8 ah_offset[AR5K_MAX_RF_BANKS]; 1406 1407 1408 struct { 1409 /* Temporary tables used for interpolation */ 1410 u8 tmpL[AR5K_EEPROM_N_PD_GAINS] 1411 [AR5K_EEPROM_POWER_TABLE_SIZE]; 1412 u8 tmpR[AR5K_EEPROM_N_PD_GAINS] 1413 [AR5K_EEPROM_POWER_TABLE_SIZE]; 1414 u8 txp_pd_table[AR5K_EEPROM_POWER_TABLE_SIZE * 2]; 1415 u16 txp_rates_power_table[AR5K_MAX_RATES]; 1416 u8 txp_min_idx; 1417 bool txp_tpc; 1418 /* Values in 0.25dB units */ 1419 s16 txp_min_pwr; 1420 s16 txp_max_pwr; 1421 s16 txp_cur_pwr; 1422 /* Values in 0.5dB units */ 1423 s16 txp_offset; 1424 s16 txp_ofdm; 1425 s16 txp_cck_ofdm_gainf_delta; 1426 /* Value in dB units */ 1427 s16 txp_cck_ofdm_pwr_delta; 1428 bool txp_setup; 1429 int txp_requested; /* Requested tx power in dBm */ 1430 } ah_txpower; 1431 1432 struct ath5k_nfcal_hist ah_nfcal_hist; 1433 1434 /* average beacon RSSI in our BSS (used by ANI) */ 1435 struct ewma ah_beacon_rssi_avg; 1436 1437 /* noise floor from last periodic calibration */ 1438 s32 ah_noise_floor; 1439 1440 /* Calibration timestamp */ 1441 unsigned long ah_cal_next_full; 1442 unsigned long ah_cal_next_short; 1443 unsigned long ah_cal_next_ani; 1444 1445 /* Calibration mask */ 1446 u8 ah_cal_mask; 1447 1448 /* 1449 * Function pointers 1450 */ 1451 int (*ah_setup_tx_desc)(struct ath5k_hw *, struct ath5k_desc *, 1452 unsigned int, unsigned int, int, enum ath5k_pkt_type, 1453 unsigned int, unsigned int, unsigned int, unsigned int, 1454 unsigned int, unsigned int, unsigned int, unsigned int); 1455 int (*ah_proc_tx_desc)(struct ath5k_hw *, struct ath5k_desc *, 1456 struct ath5k_tx_status *); 1457 int (*ah_proc_rx_desc)(struct ath5k_hw *, struct ath5k_desc *, 1458 struct ath5k_rx_status *); 1459 }; 1460 1461 struct ath_bus_ops { 1462 enum ath_bus_type ath_bus_type; 1463 void (*read_cachesize)(struct ath_common *common, int *csz); 1464 bool (*eeprom_read)(struct ath_common *common, u32 off, u16 *data); 1465 int (*eeprom_read_mac)(struct ath5k_hw *ah, u8 *mac); 1466 }; 1467 1468 /* 1469 * Prototypes 1470 */ 1471 extern const struct ieee80211_ops ath5k_hw_ops; 1472 1473 /* Initialization and detach functions */ 1474 int ath5k_hw_init(struct ath5k_hw *ah); 1475 void ath5k_hw_deinit(struct ath5k_hw *ah); 1476 1477 int ath5k_sysfs_register(struct ath5k_hw *ah); 1478 void ath5k_sysfs_unregister(struct ath5k_hw *ah); 1479 1480 /*Chip id helper functions */ 1481 int ath5k_hw_read_srev(struct ath5k_hw *ah); 1482 1483 /* LED functions */ 1484 int ath5k_init_leds(struct ath5k_hw *ah); 1485 void ath5k_led_enable(struct ath5k_hw *ah); 1486 void ath5k_led_off(struct ath5k_hw *ah); 1487 void ath5k_unregister_leds(struct ath5k_hw *ah); 1488 1489 1490 /* Reset Functions */ 1491 int ath5k_hw_nic_wakeup(struct ath5k_hw *ah, struct ieee80211_channel *channel); 1492 int ath5k_hw_on_hold(struct ath5k_hw *ah); 1493 int ath5k_hw_reset(struct ath5k_hw *ah, enum nl80211_iftype op_mode, 1494 struct ieee80211_channel *channel, bool fast, bool skip_pcu); 1495 int ath5k_hw_register_timeout(struct ath5k_hw *ah, u32 reg, u32 flag, u32 val, 1496 bool is_set); 1497 /* Power management functions */ 1498 1499 1500 /* Clock rate related functions */ 1501 unsigned int ath5k_hw_htoclock(struct ath5k_hw *ah, unsigned int usec); 1502 unsigned int ath5k_hw_clocktoh(struct ath5k_hw *ah, unsigned int clock); 1503 void ath5k_hw_set_clockrate(struct ath5k_hw *ah); 1504 1505 1506 /* DMA Related Functions */ 1507 void ath5k_hw_start_rx_dma(struct ath5k_hw *ah); 1508 u32 ath5k_hw_get_rxdp(struct ath5k_hw *ah); 1509 int ath5k_hw_set_rxdp(struct ath5k_hw *ah, u32 phys_addr); 1510 int ath5k_hw_start_tx_dma(struct ath5k_hw *ah, unsigned int queue); 1511 int ath5k_hw_stop_beacon_queue(struct ath5k_hw *ah, unsigned int queue); 1512 u32 ath5k_hw_get_txdp(struct ath5k_hw *ah, unsigned int queue); 1513 int ath5k_hw_set_txdp(struct ath5k_hw *ah, unsigned int queue, 1514 u32 phys_addr); 1515 int ath5k_hw_update_tx_triglevel(struct ath5k_hw *ah, bool increase); 1516 /* Interrupt handling */ 1517 bool ath5k_hw_is_intr_pending(struct ath5k_hw *ah); 1518 int ath5k_hw_get_isr(struct ath5k_hw *ah, enum ath5k_int *interrupt_mask); 1519 enum ath5k_int ath5k_hw_set_imr(struct ath5k_hw *ah, enum ath5k_int new_mask); 1520 void ath5k_hw_update_mib_counters(struct ath5k_hw *ah); 1521 /* Init/Stop functions */ 1522 void ath5k_hw_dma_init(struct ath5k_hw *ah); 1523 int ath5k_hw_dma_stop(struct ath5k_hw *ah); 1524 1525 /* EEPROM access functions */ 1526 int ath5k_eeprom_init(struct ath5k_hw *ah); 1527 void ath5k_eeprom_detach(struct ath5k_hw *ah); 1528 int ath5k_eeprom_mode_from_channel(struct ath5k_hw *ah, 1529 struct ieee80211_channel *channel); 1530 1531 /* Protocol Control Unit Functions */ 1532 /* Helpers */ 1533 int ath5k_hw_get_frame_duration(struct ath5k_hw *ah, enum ieee80211_band band, 1534 int len, struct ieee80211_rate *rate, bool shortpre); 1535 unsigned int ath5k_hw_get_default_slottime(struct ath5k_hw *ah); 1536 unsigned int ath5k_hw_get_default_sifs(struct ath5k_hw *ah); 1537 int ath5k_hw_set_opmode(struct ath5k_hw *ah, enum nl80211_iftype opmode); 1538 void ath5k_hw_set_coverage_class(struct ath5k_hw *ah, u8 coverage_class); 1539 /* RX filter control*/ 1540 int ath5k_hw_set_lladdr(struct ath5k_hw *ah, const u8 *mac); 1541 void ath5k_hw_set_bssid(struct ath5k_hw *ah); 1542 void ath5k_hw_set_bssid_mask(struct ath5k_hw *ah, const u8 *mask); 1543 void ath5k_hw_set_mcast_filter(struct ath5k_hw *ah, u32 filter0, u32 filter1); 1544 u32 ath5k_hw_get_rx_filter(struct ath5k_hw *ah); 1545 void ath5k_hw_set_rx_filter(struct ath5k_hw *ah, u32 filter); 1546 /* Receive (DRU) start/stop functions */ 1547 void ath5k_hw_start_rx_pcu(struct ath5k_hw *ah); 1548 void ath5k_hw_stop_rx_pcu(struct ath5k_hw *ah); 1549 /* Beacon control functions */ 1550 u64 ath5k_hw_get_tsf64(struct ath5k_hw *ah); 1551 void ath5k_hw_set_tsf64(struct ath5k_hw *ah, u64 tsf64); 1552 void ath5k_hw_reset_tsf(struct ath5k_hw *ah); 1553 void ath5k_hw_init_beacon_timers(struct ath5k_hw *ah, u32 next_beacon, 1554 u32 interval); 1555 bool ath5k_hw_check_beacon_timers(struct ath5k_hw *ah, int intval); 1556 /* Init function */ 1557 void ath5k_hw_pcu_init(struct ath5k_hw *ah, enum nl80211_iftype op_mode); 1558 1559 /* Queue Control Unit, DFS Control Unit Functions */ 1560 int ath5k_hw_get_tx_queueprops(struct ath5k_hw *ah, int queue, 1561 struct ath5k_txq_info *queue_info); 1562 int ath5k_hw_set_tx_queueprops(struct ath5k_hw *ah, int queue, 1563 const struct ath5k_txq_info *queue_info); 1564 int ath5k_hw_setup_tx_queue(struct ath5k_hw *ah, 1565 enum ath5k_tx_queue queue_type, 1566 struct ath5k_txq_info *queue_info); 1567 void ath5k_hw_set_tx_retry_limits(struct ath5k_hw *ah, 1568 unsigned int queue); 1569 u32 ath5k_hw_num_tx_pending(struct ath5k_hw *ah, unsigned int queue); 1570 void ath5k_hw_release_tx_queue(struct ath5k_hw *ah, unsigned int queue); 1571 int ath5k_hw_reset_tx_queue(struct ath5k_hw *ah, unsigned int queue); 1572 int ath5k_hw_set_ifs_intervals(struct ath5k_hw *ah, unsigned int slot_time); 1573 /* Init function */ 1574 int ath5k_hw_init_queues(struct ath5k_hw *ah); 1575 1576 /* Hardware Descriptor Functions */ 1577 int ath5k_hw_init_desc_functions(struct ath5k_hw *ah); 1578 int ath5k_hw_setup_rx_desc(struct ath5k_hw *ah, struct ath5k_desc *desc, 1579 u32 size, unsigned int flags); 1580 int ath5k_hw_setup_mrr_tx_desc(struct ath5k_hw *ah, struct ath5k_desc *desc, 1581 unsigned int tx_rate1, u_int tx_tries1, u_int tx_rate2, 1582 u_int tx_tries2, unsigned int tx_rate3, u_int tx_tries3); 1583 1584 1585 /* GPIO Functions */ 1586 void ath5k_hw_set_ledstate(struct ath5k_hw *ah, unsigned int state); 1587 int ath5k_hw_set_gpio_input(struct ath5k_hw *ah, u32 gpio); 1588 int ath5k_hw_set_gpio_output(struct ath5k_hw *ah, u32 gpio); 1589 u32 ath5k_hw_get_gpio(struct ath5k_hw *ah, u32 gpio); 1590 int ath5k_hw_set_gpio(struct ath5k_hw *ah, u32 gpio, u32 val); 1591 void ath5k_hw_set_gpio_intr(struct ath5k_hw *ah, unsigned int gpio, 1592 u32 interrupt_level); 1593 1594 1595 /* RFkill Functions */ 1596 void ath5k_rfkill_hw_start(struct ath5k_hw *ah); 1597 void ath5k_rfkill_hw_stop(struct ath5k_hw *ah); 1598 1599 1600 /* Misc functions TODO: Cleanup */ 1601 int ath5k_hw_set_capabilities(struct ath5k_hw *ah); 1602 int ath5k_hw_enable_pspoll(struct ath5k_hw *ah, u8 *bssid, u16 assoc_id); 1603 int ath5k_hw_disable_pspoll(struct ath5k_hw *ah); 1604 1605 1606 /* Initial register settings functions */ 1607 int ath5k_hw_write_initvals(struct ath5k_hw *ah, u8 mode, bool change_channel); 1608 1609 1610 /* PHY functions */ 1611 /* Misc PHY functions */ 1612 u16 ath5k_hw_radio_revision(struct ath5k_hw *ah, enum ieee80211_band band); 1613 int ath5k_hw_phy_disable(struct ath5k_hw *ah); 1614 /* Gain_F optimization */ 1615 enum ath5k_rfgain ath5k_hw_gainf_calibrate(struct ath5k_hw *ah); 1616 int ath5k_hw_rfgain_opt_init(struct ath5k_hw *ah); 1617 /* PHY/RF channel functions */ 1618 bool ath5k_channel_ok(struct ath5k_hw *ah, struct ieee80211_channel *channel); 1619 /* PHY calibration */ 1620 void ath5k_hw_init_nfcal_hist(struct ath5k_hw *ah); 1621 int ath5k_hw_phy_calibrate(struct ath5k_hw *ah, 1622 struct ieee80211_channel *channel); 1623 void ath5k_hw_update_noise_floor(struct ath5k_hw *ah); 1624 /* Spur mitigation */ 1625 bool ath5k_hw_chan_has_spur_noise(struct ath5k_hw *ah, 1626 struct ieee80211_channel *channel); 1627 /* Antenna control */ 1628 void ath5k_hw_set_antenna_mode(struct ath5k_hw *ah, u8 ant_mode); 1629 void ath5k_hw_set_antenna_switch(struct ath5k_hw *ah, u8 ee_mode); 1630 /* TX power setup */ 1631 int ath5k_hw_set_txpower_limit(struct ath5k_hw *ah, u8 txpower); 1632 /* Init function */ 1633 int ath5k_hw_phy_init(struct ath5k_hw *ah, struct ieee80211_channel *channel, 1634 u8 mode, bool fast); 1635 1636 /* 1637 * Functions used internally 1638 */ 1639 1640 static inline struct ath_common *ath5k_hw_common(struct ath5k_hw *ah) 1641 { 1642 return &ah->common; 1643 } 1644 1645 static inline struct ath_regulatory *ath5k_hw_regulatory(struct ath5k_hw *ah) 1646 { 1647 return &(ath5k_hw_common(ah)->regulatory); 1648 } 1649 1650 #ifdef CONFIG_ATHEROS_AR231X 1651 #define AR5K_AR2315_PCI_BASE ((void __iomem *)0xb0100000) 1652 1653 static inline void __iomem *ath5k_ahb_reg(struct ath5k_hw *ah, u16 reg) 1654 { 1655 /* On AR2315 and AR2317 the PCI clock domain registers 1656 * are outside of the WMAC register space */ 1657 if (unlikely((reg >= 0x4000) && (reg < 0x5000) && 1658 (ah->ah_mac_srev >= AR5K_SREV_AR2315_R6))) 1659 return AR5K_AR2315_PCI_BASE + reg; 1660 1661 return ah->iobase + reg; 1662 } 1663 1664 static inline u32 ath5k_hw_reg_read(struct ath5k_hw *ah, u16 reg) 1665 { 1666 return ioread32(ath5k_ahb_reg(ah, reg)); 1667 } 1668 1669 static inline void ath5k_hw_reg_write(struct ath5k_hw *ah, u32 val, u16 reg) 1670 { 1671 iowrite32(val, ath5k_ahb_reg(ah, reg)); 1672 } 1673 1674 #else 1675 1676 static inline u32 ath5k_hw_reg_read(struct ath5k_hw *ah, u16 reg) 1677 { 1678 return ioread32(ah->iobase + reg); 1679 } 1680 1681 static inline void ath5k_hw_reg_write(struct ath5k_hw *ah, u32 val, u16 reg) 1682 { 1683 iowrite32(val, ah->iobase + reg); 1684 } 1685 1686 #endif 1687 1688 static inline enum ath_bus_type ath5k_get_bus_type(struct ath5k_hw *ah) 1689 { 1690 return ath5k_hw_common(ah)->bus_ops->ath_bus_type; 1691 } 1692 1693 static inline void ath5k_read_cachesize(struct ath_common *common, int *csz) 1694 { 1695 common->bus_ops->read_cachesize(common, csz); 1696 } 1697 1698 static inline bool ath5k_hw_nvram_read(struct ath5k_hw *ah, u32 off, u16 *data) 1699 { 1700 struct ath_common *common = ath5k_hw_common(ah); 1701 return common->bus_ops->eeprom_read(common, off, data); 1702 } 1703 1704 static inline u32 ath5k_hw_bitswap(u32 val, unsigned int bits) 1705 { 1706 u32 retval = 0, bit, i; 1707 1708 for (i = 0; i < bits; i++) { 1709 bit = (val >> i) & 1; 1710 retval = (retval << 1) | bit; 1711 } 1712 1713 return retval; 1714 } 1715 1716 #endif 1717