xref: /linux/drivers/net/wireless/ath/ath5k/ani.h (revision 251f39fe42dae863bd24e30864e6b66076ba076d)
1 /*
2  * Copyright (C) 2010 Bruno Randolf <br1@einfach.org>
3  *
4  * Permission to use, copy, modify, and/or distribute this software for any
5  * purpose with or without fee is hereby granted, provided that the above
6  * copyright notice and this permission notice appear in all copies.
7  *
8  * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
9  * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
10  * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
11  * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
12  * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
13  * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
14  * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
15  */
16 #ifndef ANI_H
17 #define ANI_H
18 
19 #include "../ath.h"
20 
21 enum ath5k_phy_error_code;
22 
23 /* these thresholds are relative to the ATH5K_ANI_LISTEN_PERIOD */
24 #define ATH5K_ANI_LISTEN_PERIOD		100
25 #define ATH5K_ANI_OFDM_TRIG_HIGH	500
26 #define ATH5K_ANI_OFDM_TRIG_LOW		200
27 #define ATH5K_ANI_CCK_TRIG_HIGH		200
28 #define ATH5K_ANI_CCK_TRIG_LOW		100
29 
30 /* average beacon RSSI thresholds */
31 #define ATH5K_ANI_RSSI_THR_HIGH		40
32 #define ATH5K_ANI_RSSI_THR_LOW		7
33 
34 /* maximum available levels */
35 #define ATH5K_ANI_MAX_FIRSTEP_LVL	2
36 #define ATH5K_ANI_MAX_NOISE_IMM_LVL	1
37 
38 
39 /**
40  * enum ath5k_ani_mode - mode for ANI / noise sensitivity
41  *
42  * @ATH5K_ANI_MODE_OFF: Turn ANI off. This can be useful to just stop the ANI
43  *	algorithm after it has been on auto mode.
44  * ATH5K_ANI_MODE_MANUAL_LOW: Manually set all immunity parameters to low,
45  *	maximizing sensitivity. ANI will not run.
46  * ATH5K_ANI_MODE_MANUAL_HIGH: Manually set all immunity parameters to high,
47  *	minimizing sensitivity. ANI will not run.
48  * ATH5K_ANI_MODE_AUTO: Automatically control immunity parameters based on the
49  *	amount of OFDM and CCK frame errors (default).
50  */
51 enum ath5k_ani_mode {
52 	ATH5K_ANI_MODE_OFF		= 0,
53 	ATH5K_ANI_MODE_MANUAL_LOW	= 1,
54 	ATH5K_ANI_MODE_MANUAL_HIGH	= 2,
55 	ATH5K_ANI_MODE_AUTO		= 3
56 };
57 
58 
59 /**
60  * struct ath5k_ani_state - ANI state and associated counters
61  *
62  * @max_spur_level: the maximum spur level is chip dependent
63  */
64 struct ath5k_ani_state {
65 	enum ath5k_ani_mode	ani_mode;
66 
67 	/* state */
68 	int			noise_imm_level;
69 	int			spur_level;
70 	int			firstep_level;
71 	bool			ofdm_weak_sig;
72 	bool			cck_weak_sig;
73 
74 	int			max_spur_level;
75 
76 	/* used by the algorithm */
77 	unsigned int		listen_time;
78 	unsigned int		ofdm_errors;
79 	unsigned int		cck_errors;
80 
81 	/* debug/statistics only: numbers from last ANI calibration */
82 	struct ath_cycle_counters last_cc;
83 	unsigned int		last_listen;
84 	unsigned int		last_ofdm_errors;
85 	unsigned int		last_cck_errors;
86 	unsigned int		sum_ofdm_errors;
87 	unsigned int		sum_cck_errors;
88 };
89 
90 void ath5k_ani_init(struct ath5k_hw *ah, enum ath5k_ani_mode mode);
91 void ath5k_ani_mib_intr(struct ath5k_hw *ah);
92 void ath5k_ani_calibration(struct ath5k_hw *ah);
93 void ath5k_ani_phy_error_report(struct ath5k_hw *ah,
94 				enum ath5k_phy_error_code phyerr);
95 
96 /* for manual control */
97 void ath5k_ani_set_noise_immunity_level(struct ath5k_hw *ah, int level);
98 void ath5k_ani_set_spur_immunity_level(struct ath5k_hw *ah, int level);
99 void ath5k_ani_set_firstep_level(struct ath5k_hw *ah, int level);
100 void ath5k_ani_set_ofdm_weak_signal_detection(struct ath5k_hw *ah, bool on);
101 void ath5k_ani_set_cck_weak_signal_detection(struct ath5k_hw *ah, bool on);
102 
103 void ath5k_ani_print_counters(struct ath5k_hw *ah);
104 
105 #endif /* ANI_H */
106