xref: /linux/drivers/net/wireless/ath/ath12k/ce.h (revision fd7d598270724cc787982ea48bbe17ad383a8b7f)
1 /* SPDX-License-Identifier: BSD-3-Clause-Clear */
2 /*
3  * Copyright (c) 2018-2021 The Linux Foundation. All rights reserved.
4  * Copyright (c) 2021-2022 Qualcomm Innovation Center, Inc. All rights reserved.
5  */
6 
7 #ifndef ATH12K_CE_H
8 #define ATH12K_CE_H
9 
10 #define CE_COUNT_MAX 16
11 
12 /* Byte swap data words */
13 #define CE_ATTR_BYTE_SWAP_DATA 2
14 
15 /* no interrupt on copy completion */
16 #define CE_ATTR_DIS_INTR		8
17 
18 /* Host software's Copy Engine configuration. */
19 #define CE_ATTR_FLAGS 0
20 
21 /* Threshold to poll for tx completion in case of Interrupt disabled CE's */
22 #define ATH12K_CE_USAGE_THRESHOLD 32
23 
24 /* Directions for interconnect pipe configuration.
25  * These definitions may be used during configuration and are shared
26  * between Host and Target.
27  *
28  * Pipe Directions are relative to the Host, so PIPEDIR_IN means
29  * "coming IN over air through Target to Host" as with a WiFi Rx operation.
30  * Conversely, PIPEDIR_OUT means "going OUT from Host through Target over air"
31  * as with a WiFi Tx operation. This is somewhat awkward for the "middle-man"
32  * Target since things that are "PIPEDIR_OUT" are coming IN to the Target
33  * over the interconnect.
34  */
35 #define PIPEDIR_NONE		0
36 #define PIPEDIR_IN		1 /* Target-->Host, WiFi Rx direction */
37 #define PIPEDIR_OUT		2 /* Host->Target, WiFi Tx direction */
38 #define PIPEDIR_INOUT		3 /* bidirectional */
39 #define PIPEDIR_INOUT_H2H	4 /* bidirectional, host to host */
40 
41 /* CE address/mask */
42 #define CE_HOST_IE_ADDRESS	0x00A1803C
43 #define CE_HOST_IE_2_ADDRESS	0x00A18040
44 #define CE_HOST_IE_3_ADDRESS	CE_HOST_IE_ADDRESS
45 
46 #define CE_HOST_IE_3_SHIFT	0xC
47 
48 #define CE_RING_IDX_INCR(nentries_mask, idx) (((idx) + 1) & (nentries_mask))
49 
50 #define ATH12K_CE_RX_POST_RETRY_JIFFIES 50
51 
52 struct ath12k_base;
53 
54 /* Establish a mapping between a service/direction and a pipe.
55  * Configuration information for a Copy Engine pipe and services.
56  * Passed from Host to Target through QMI message and must be in
57  * little endian format.
58  */
59 struct service_to_pipe {
60 	__le32 service_id;
61 	__le32 pipedir;
62 	__le32 pipenum;
63 };
64 
65 /* Configuration information for a Copy Engine pipe.
66  * Passed from Host to Target through QMI message during startup (one per CE).
67  *
68  * NOTE: Structure is shared between Host software and Target firmware!
69  */
70 struct ce_pipe_config {
71 	__le32 pipenum;
72 	__le32 pipedir;
73 	__le32 nentries;
74 	__le32 nbytes_max;
75 	__le32 flags;
76 	__le32 reserved;
77 };
78 
79 struct ce_attr {
80 	/* CE_ATTR_* values */
81 	unsigned int flags;
82 
83 	/* #entries in source ring - Must be a power of 2 */
84 	unsigned int src_nentries;
85 
86 	/* Max source send size for this CE.
87 	 * This is also the minimum size of a destination buffer.
88 	 */
89 	unsigned int src_sz_max;
90 
91 	/* #entries in destination ring - Must be a power of 2 */
92 	unsigned int dest_nentries;
93 
94 	void (*recv_cb)(struct ath12k_base *ab, struct sk_buff *skb);
95 };
96 
97 #define CE_DESC_RING_ALIGN 8
98 
99 struct ath12k_ce_ring {
100 	/* Number of entries in this ring; must be power of 2 */
101 	unsigned int nentries;
102 	unsigned int nentries_mask;
103 
104 	/* For dest ring, this is the next index to be processed
105 	 * by software after it was/is received into.
106 	 *
107 	 * For src ring, this is the last descriptor that was sent
108 	 * and completion processed by software.
109 	 *
110 	 * Regardless of src or dest ring, this is an invariant
111 	 * (modulo ring size):
112 	 *     write index >= read index >= sw_index
113 	 */
114 	unsigned int sw_index;
115 	/* cached copy */
116 	unsigned int write_index;
117 
118 	/* Start of DMA-coherent area reserved for descriptors */
119 	/* Host address space */
120 	void *base_addr_owner_space_unaligned;
121 	/* CE address space */
122 	u32 base_addr_ce_space_unaligned;
123 
124 	/* Actual start of descriptors.
125 	 * Aligned to descriptor-size boundary.
126 	 * Points into reserved DMA-coherent area, above.
127 	 */
128 	/* Host address space */
129 	void *base_addr_owner_space;
130 
131 	/* CE address space */
132 	u32 base_addr_ce_space;
133 
134 	/* HAL ring id */
135 	u32 hal_ring_id;
136 
137 	/* keep last */
138 	struct sk_buff *skb[];
139 };
140 
141 struct ath12k_ce_pipe {
142 	struct ath12k_base *ab;
143 	u16 pipe_num;
144 	unsigned int attr_flags;
145 	unsigned int buf_sz;
146 	unsigned int rx_buf_needed;
147 
148 	void (*send_cb)(struct ath12k_ce_pipe *pipe);
149 	void (*recv_cb)(struct ath12k_base *ab, struct sk_buff *skb);
150 
151 	struct tasklet_struct intr_tq;
152 	struct ath12k_ce_ring *src_ring;
153 	struct ath12k_ce_ring *dest_ring;
154 	struct ath12k_ce_ring *status_ring;
155 	u64 timestamp;
156 };
157 
158 struct ath12k_ce {
159 	struct ath12k_ce_pipe ce_pipe[CE_COUNT_MAX];
160 	/* Protects rings of all ce pipes */
161 	spinlock_t ce_lock;
162 	struct ath12k_hp_update_timer hp_timer[CE_COUNT_MAX];
163 };
164 
165 extern const struct ce_attr ath12k_host_ce_config_qcn9274[];
166 extern const struct ce_attr ath12k_host_ce_config_wcn7850[];
167 
168 void ath12k_ce_cleanup_pipes(struct ath12k_base *ab);
169 void ath12k_ce_rx_replenish_retry(struct timer_list *t);
170 void ath12k_ce_per_engine_service(struct ath12k_base *ab, u16 ce_id);
171 int ath12k_ce_send(struct ath12k_base *ab, struct sk_buff *skb, u8 pipe_id,
172 		   u16 transfer_id);
173 void ath12k_ce_rx_post_buf(struct ath12k_base *ab);
174 int ath12k_ce_init_pipes(struct ath12k_base *ab);
175 int ath12k_ce_alloc_pipes(struct ath12k_base *ab);
176 void ath12k_ce_free_pipes(struct ath12k_base *ab);
177 int ath12k_ce_get_attr_flags(struct ath12k_base *ab, int ce_id);
178 void ath12k_ce_poll_send_completed(struct ath12k_base *ab, u8 pipe_id);
179 void ath12k_ce_get_shadow_config(struct ath12k_base *ab,
180 				 u32 **shadow_cfg, u32 *shadow_cfg_len);
181 #endif
182