1 /* 2 * Copyright (c) 2005-2011 Atheros Communications Inc. 3 * Copyright (c) 2011-2013 Qualcomm Atheros, Inc. 4 * 5 * Permission to use, copy, modify, and/or distribute this software for any 6 * purpose with or without fee is hereby granted, provided that the above 7 * copyright notice and this permission notice appear in all copies. 8 * 9 * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES 10 * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF 11 * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR 12 * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES 13 * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN 14 * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF 15 * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. 16 */ 17 18 #ifndef _WMI_H_ 19 #define _WMI_H_ 20 21 #include <linux/types.h> 22 #include <net/mac80211.h> 23 24 /* 25 * This file specifies the WMI interface for the Unified Software 26 * Architecture. 27 * 28 * It includes definitions of all the commands and events. Commands are 29 * messages from the host to the target. Events and Replies are messages 30 * from the target to the host. 31 * 32 * Ownership of correctness in regards to WMI commands belongs to the host 33 * driver and the target is not required to validate parameters for value, 34 * proper range, or any other checking. 35 * 36 * Guidelines for extending this interface are below. 37 * 38 * 1. Add new WMI commands ONLY within the specified range - 0x9000 - 0x9fff 39 * 40 * 2. Use ONLY u32 type for defining member variables within WMI 41 * command/event structures. Do not use u8, u16, bool or 42 * enum types within these structures. 43 * 44 * 3. DO NOT define bit fields within structures. Implement bit fields 45 * using masks if necessary. Do not use the programming language's bit 46 * field definition. 47 * 48 * 4. Define macros for encode/decode of u8, u16 fields within 49 * the u32 variables. Use these macros for set/get of these fields. 50 * Try to use this to optimize the structure without bloating it with 51 * u32 variables for every lower sized field. 52 * 53 * 5. Do not use PACK/UNPACK attributes for the structures as each member 54 * variable is already 4-byte aligned by virtue of being a u32 55 * type. 56 * 57 * 6. Comment each parameter part of the WMI command/event structure by 58 * using the 2 stars at the beginning of C comment instead of one star to 59 * enable HTML document generation using Doxygen. 60 * 61 */ 62 63 /* Control Path */ 64 struct wmi_cmd_hdr { 65 __le32 cmd_id; 66 } __packed; 67 68 #define WMI_CMD_HDR_CMD_ID_MASK 0x00FFFFFF 69 #define WMI_CMD_HDR_CMD_ID_LSB 0 70 #define WMI_CMD_HDR_PLT_PRIV_MASK 0xFF000000 71 #define WMI_CMD_HDR_PLT_PRIV_LSB 24 72 73 #define HTC_PROTOCOL_VERSION 0x0002 74 #define WMI_PROTOCOL_VERSION 0x0002 75 76 /* 77 * There is no signed version of __le32, so for a temporary solution come 78 * up with our own version. The idea is from fs/ntfs/endian.h. 79 * 80 * Use a_ prefix so that it doesn't conflict if we get proper support to 81 * linux/types.h. 82 */ 83 typedef __s32 __bitwise a_sle32; 84 85 static inline a_sle32 a_cpu_to_sle32(s32 val) 86 { 87 return (__force a_sle32)cpu_to_le32(val); 88 } 89 90 static inline s32 a_sle32_to_cpu(a_sle32 val) 91 { 92 return le32_to_cpu((__force __le32)val); 93 } 94 95 enum wmi_service { 96 WMI_SERVICE_BEACON_OFFLOAD = 0, 97 WMI_SERVICE_SCAN_OFFLOAD, 98 WMI_SERVICE_ROAM_OFFLOAD, 99 WMI_SERVICE_BCN_MISS_OFFLOAD, 100 WMI_SERVICE_STA_PWRSAVE, 101 WMI_SERVICE_STA_ADVANCED_PWRSAVE, 102 WMI_SERVICE_AP_UAPSD, 103 WMI_SERVICE_AP_DFS, 104 WMI_SERVICE_11AC, 105 WMI_SERVICE_BLOCKACK, 106 WMI_SERVICE_PHYERR, 107 WMI_SERVICE_BCN_FILTER, 108 WMI_SERVICE_RTT, 109 WMI_SERVICE_RATECTRL, 110 WMI_SERVICE_WOW, 111 WMI_SERVICE_RATECTRL_CACHE, 112 WMI_SERVICE_IRAM_TIDS, 113 WMI_SERVICE_ARPNS_OFFLOAD, 114 WMI_SERVICE_NLO, 115 WMI_SERVICE_GTK_OFFLOAD, 116 WMI_SERVICE_SCAN_SCH, 117 WMI_SERVICE_CSA_OFFLOAD, 118 WMI_SERVICE_CHATTER, 119 WMI_SERVICE_COEX_FREQAVOID, 120 WMI_SERVICE_PACKET_POWER_SAVE, 121 WMI_SERVICE_FORCE_FW_HANG, 122 WMI_SERVICE_GPIO, 123 WMI_SERVICE_STA_DTIM_PS_MODULATED_DTIM, 124 WMI_SERVICE_STA_UAPSD_BASIC_AUTO_TRIG, 125 WMI_SERVICE_STA_UAPSD_VAR_AUTO_TRIG, 126 WMI_SERVICE_STA_KEEP_ALIVE, 127 WMI_SERVICE_TX_ENCAP, 128 WMI_SERVICE_BURST, 129 WMI_SERVICE_SMART_ANTENNA_SW_SUPPORT, 130 WMI_SERVICE_SMART_ANTENNA_HW_SUPPORT, 131 WMI_SERVICE_ROAM_SCAN_OFFLOAD, 132 WMI_SERVICE_AP_PS_DETECT_OUT_OF_SYNC, 133 WMI_SERVICE_EARLY_RX, 134 WMI_SERVICE_STA_SMPS, 135 WMI_SERVICE_FWTEST, 136 WMI_SERVICE_STA_WMMAC, 137 WMI_SERVICE_TDLS, 138 WMI_SERVICE_MCC_BCN_INTERVAL_CHANGE, 139 WMI_SERVICE_ADAPTIVE_OCS, 140 WMI_SERVICE_BA_SSN_SUPPORT, 141 WMI_SERVICE_FILTER_IPSEC_NATKEEPALIVE, 142 WMI_SERVICE_WLAN_HB, 143 WMI_SERVICE_LTE_ANT_SHARE_SUPPORT, 144 WMI_SERVICE_BATCH_SCAN, 145 WMI_SERVICE_QPOWER, 146 WMI_SERVICE_PLMREQ, 147 WMI_SERVICE_THERMAL_MGMT, 148 WMI_SERVICE_RMC, 149 WMI_SERVICE_MHF_OFFLOAD, 150 WMI_SERVICE_COEX_SAR, 151 WMI_SERVICE_BCN_TXRATE_OVERRIDE, 152 WMI_SERVICE_NAN, 153 WMI_SERVICE_L1SS_STAT, 154 WMI_SERVICE_ESTIMATE_LINKSPEED, 155 WMI_SERVICE_OBSS_SCAN, 156 WMI_SERVICE_TDLS_OFFCHAN, 157 WMI_SERVICE_TDLS_UAPSD_BUFFER_STA, 158 WMI_SERVICE_TDLS_UAPSD_SLEEP_STA, 159 WMI_SERVICE_IBSS_PWRSAVE, 160 WMI_SERVICE_LPASS, 161 WMI_SERVICE_EXTSCAN, 162 WMI_SERVICE_D0WOW, 163 WMI_SERVICE_HSOFFLOAD, 164 WMI_SERVICE_ROAM_HO_OFFLOAD, 165 WMI_SERVICE_RX_FULL_REORDER, 166 WMI_SERVICE_DHCP_OFFLOAD, 167 WMI_SERVICE_STA_RX_IPA_OFFLOAD_SUPPORT, 168 WMI_SERVICE_MDNS_OFFLOAD, 169 WMI_SERVICE_SAP_AUTH_OFFLOAD, 170 WMI_SERVICE_ATF, 171 WMI_SERVICE_COEX_GPIO, 172 WMI_SERVICE_ENHANCED_PROXY_STA, 173 WMI_SERVICE_TT, 174 WMI_SERVICE_PEER_CACHING, 175 WMI_SERVICE_AUX_SPECTRAL_INTF, 176 WMI_SERVICE_AUX_CHAN_LOAD_INTF, 177 WMI_SERVICE_BSS_CHANNEL_INFO_64, 178 WMI_SERVICE_EXT_RES_CFG_SUPPORT, 179 WMI_SERVICE_MESH_11S, 180 WMI_SERVICE_MESH_NON_11S, 181 WMI_SERVICE_PEER_STATS, 182 WMI_SERVICE_RESTRT_CHNL_SUPPORT, 183 WMI_SERVICE_PERIODIC_CHAN_STAT_SUPPORT, 184 WMI_SERVICE_TX_MODE_PUSH_ONLY, 185 WMI_SERVICE_TX_MODE_PUSH_PULL, 186 WMI_SERVICE_TX_MODE_DYNAMIC, 187 188 /* keep last */ 189 WMI_SERVICE_MAX, 190 }; 191 192 enum wmi_10x_service { 193 WMI_10X_SERVICE_BEACON_OFFLOAD = 0, 194 WMI_10X_SERVICE_SCAN_OFFLOAD, 195 WMI_10X_SERVICE_ROAM_OFFLOAD, 196 WMI_10X_SERVICE_BCN_MISS_OFFLOAD, 197 WMI_10X_SERVICE_STA_PWRSAVE, 198 WMI_10X_SERVICE_STA_ADVANCED_PWRSAVE, 199 WMI_10X_SERVICE_AP_UAPSD, 200 WMI_10X_SERVICE_AP_DFS, 201 WMI_10X_SERVICE_11AC, 202 WMI_10X_SERVICE_BLOCKACK, 203 WMI_10X_SERVICE_PHYERR, 204 WMI_10X_SERVICE_BCN_FILTER, 205 WMI_10X_SERVICE_RTT, 206 WMI_10X_SERVICE_RATECTRL, 207 WMI_10X_SERVICE_WOW, 208 WMI_10X_SERVICE_RATECTRL_CACHE, 209 WMI_10X_SERVICE_IRAM_TIDS, 210 WMI_10X_SERVICE_BURST, 211 212 /* introduced in 10.2 */ 213 WMI_10X_SERVICE_SMART_ANTENNA_SW_SUPPORT, 214 WMI_10X_SERVICE_FORCE_FW_HANG, 215 WMI_10X_SERVICE_SMART_ANTENNA_HW_SUPPORT, 216 WMI_10X_SERVICE_ATF, 217 WMI_10X_SERVICE_COEX_GPIO, 218 WMI_10X_SERVICE_AUX_SPECTRAL_INTF, 219 WMI_10X_SERVICE_AUX_CHAN_LOAD_INTF, 220 WMI_10X_SERVICE_BSS_CHANNEL_INFO_64, 221 WMI_10X_SERVICE_MESH, 222 WMI_10X_SERVICE_EXT_RES_CFG_SUPPORT, 223 WMI_10X_SERVICE_PEER_STATS, 224 }; 225 226 enum wmi_main_service { 227 WMI_MAIN_SERVICE_BEACON_OFFLOAD = 0, 228 WMI_MAIN_SERVICE_SCAN_OFFLOAD, 229 WMI_MAIN_SERVICE_ROAM_OFFLOAD, 230 WMI_MAIN_SERVICE_BCN_MISS_OFFLOAD, 231 WMI_MAIN_SERVICE_STA_PWRSAVE, 232 WMI_MAIN_SERVICE_STA_ADVANCED_PWRSAVE, 233 WMI_MAIN_SERVICE_AP_UAPSD, 234 WMI_MAIN_SERVICE_AP_DFS, 235 WMI_MAIN_SERVICE_11AC, 236 WMI_MAIN_SERVICE_BLOCKACK, 237 WMI_MAIN_SERVICE_PHYERR, 238 WMI_MAIN_SERVICE_BCN_FILTER, 239 WMI_MAIN_SERVICE_RTT, 240 WMI_MAIN_SERVICE_RATECTRL, 241 WMI_MAIN_SERVICE_WOW, 242 WMI_MAIN_SERVICE_RATECTRL_CACHE, 243 WMI_MAIN_SERVICE_IRAM_TIDS, 244 WMI_MAIN_SERVICE_ARPNS_OFFLOAD, 245 WMI_MAIN_SERVICE_NLO, 246 WMI_MAIN_SERVICE_GTK_OFFLOAD, 247 WMI_MAIN_SERVICE_SCAN_SCH, 248 WMI_MAIN_SERVICE_CSA_OFFLOAD, 249 WMI_MAIN_SERVICE_CHATTER, 250 WMI_MAIN_SERVICE_COEX_FREQAVOID, 251 WMI_MAIN_SERVICE_PACKET_POWER_SAVE, 252 WMI_MAIN_SERVICE_FORCE_FW_HANG, 253 WMI_MAIN_SERVICE_GPIO, 254 WMI_MAIN_SERVICE_STA_DTIM_PS_MODULATED_DTIM, 255 WMI_MAIN_SERVICE_STA_UAPSD_BASIC_AUTO_TRIG, 256 WMI_MAIN_SERVICE_STA_UAPSD_VAR_AUTO_TRIG, 257 WMI_MAIN_SERVICE_STA_KEEP_ALIVE, 258 WMI_MAIN_SERVICE_TX_ENCAP, 259 }; 260 261 enum wmi_10_4_service { 262 WMI_10_4_SERVICE_BEACON_OFFLOAD = 0, 263 WMI_10_4_SERVICE_SCAN_OFFLOAD, 264 WMI_10_4_SERVICE_ROAM_OFFLOAD, 265 WMI_10_4_SERVICE_BCN_MISS_OFFLOAD, 266 WMI_10_4_SERVICE_STA_PWRSAVE, 267 WMI_10_4_SERVICE_STA_ADVANCED_PWRSAVE, 268 WMI_10_4_SERVICE_AP_UAPSD, 269 WMI_10_4_SERVICE_AP_DFS, 270 WMI_10_4_SERVICE_11AC, 271 WMI_10_4_SERVICE_BLOCKACK, 272 WMI_10_4_SERVICE_PHYERR, 273 WMI_10_4_SERVICE_BCN_FILTER, 274 WMI_10_4_SERVICE_RTT, 275 WMI_10_4_SERVICE_RATECTRL, 276 WMI_10_4_SERVICE_WOW, 277 WMI_10_4_SERVICE_RATECTRL_CACHE, 278 WMI_10_4_SERVICE_IRAM_TIDS, 279 WMI_10_4_SERVICE_BURST, 280 WMI_10_4_SERVICE_SMART_ANTENNA_SW_SUPPORT, 281 WMI_10_4_SERVICE_GTK_OFFLOAD, 282 WMI_10_4_SERVICE_SCAN_SCH, 283 WMI_10_4_SERVICE_CSA_OFFLOAD, 284 WMI_10_4_SERVICE_CHATTER, 285 WMI_10_4_SERVICE_COEX_FREQAVOID, 286 WMI_10_4_SERVICE_PACKET_POWER_SAVE, 287 WMI_10_4_SERVICE_FORCE_FW_HANG, 288 WMI_10_4_SERVICE_SMART_ANTENNA_HW_SUPPORT, 289 WMI_10_4_SERVICE_GPIO, 290 WMI_10_4_SERVICE_STA_UAPSD_BASIC_AUTO_TRIG, 291 WMI_10_4_SERVICE_STA_UAPSD_VAR_AUTO_TRIG, 292 WMI_10_4_SERVICE_STA_KEEP_ALIVE, 293 WMI_10_4_SERVICE_TX_ENCAP, 294 WMI_10_4_SERVICE_AP_PS_DETECT_OUT_OF_SYNC, 295 WMI_10_4_SERVICE_EARLY_RX, 296 WMI_10_4_SERVICE_ENHANCED_PROXY_STA, 297 WMI_10_4_SERVICE_TT, 298 WMI_10_4_SERVICE_ATF, 299 WMI_10_4_SERVICE_PEER_CACHING, 300 WMI_10_4_SERVICE_COEX_GPIO, 301 WMI_10_4_SERVICE_AUX_SPECTRAL_INTF, 302 WMI_10_4_SERVICE_AUX_CHAN_LOAD_INTF, 303 WMI_10_4_SERVICE_BSS_CHANNEL_INFO_64, 304 WMI_10_4_SERVICE_EXT_RES_CFG_SUPPORT, 305 WMI_10_4_SERVICE_MESH_NON_11S, 306 WMI_10_4_SERVICE_RESTRT_CHNL_SUPPORT, 307 WMI_10_4_SERVICE_PEER_STATS, 308 WMI_10_4_SERVICE_MESH_11S, 309 WMI_10_4_SERVICE_PERIODIC_CHAN_STAT_SUPPORT, 310 WMI_10_4_SERVICE_TX_MODE_PUSH_ONLY, 311 WMI_10_4_SERVICE_TX_MODE_PUSH_PULL, 312 WMI_10_4_SERVICE_TX_MODE_DYNAMIC, 313 }; 314 315 static inline char *wmi_service_name(int service_id) 316 { 317 #define SVCSTR(x) case x: return #x 318 319 switch (service_id) { 320 SVCSTR(WMI_SERVICE_BEACON_OFFLOAD); 321 SVCSTR(WMI_SERVICE_SCAN_OFFLOAD); 322 SVCSTR(WMI_SERVICE_ROAM_OFFLOAD); 323 SVCSTR(WMI_SERVICE_BCN_MISS_OFFLOAD); 324 SVCSTR(WMI_SERVICE_STA_PWRSAVE); 325 SVCSTR(WMI_SERVICE_STA_ADVANCED_PWRSAVE); 326 SVCSTR(WMI_SERVICE_AP_UAPSD); 327 SVCSTR(WMI_SERVICE_AP_DFS); 328 SVCSTR(WMI_SERVICE_11AC); 329 SVCSTR(WMI_SERVICE_BLOCKACK); 330 SVCSTR(WMI_SERVICE_PHYERR); 331 SVCSTR(WMI_SERVICE_BCN_FILTER); 332 SVCSTR(WMI_SERVICE_RTT); 333 SVCSTR(WMI_SERVICE_RATECTRL); 334 SVCSTR(WMI_SERVICE_WOW); 335 SVCSTR(WMI_SERVICE_RATECTRL_CACHE); 336 SVCSTR(WMI_SERVICE_IRAM_TIDS); 337 SVCSTR(WMI_SERVICE_ARPNS_OFFLOAD); 338 SVCSTR(WMI_SERVICE_NLO); 339 SVCSTR(WMI_SERVICE_GTK_OFFLOAD); 340 SVCSTR(WMI_SERVICE_SCAN_SCH); 341 SVCSTR(WMI_SERVICE_CSA_OFFLOAD); 342 SVCSTR(WMI_SERVICE_CHATTER); 343 SVCSTR(WMI_SERVICE_COEX_FREQAVOID); 344 SVCSTR(WMI_SERVICE_PACKET_POWER_SAVE); 345 SVCSTR(WMI_SERVICE_FORCE_FW_HANG); 346 SVCSTR(WMI_SERVICE_GPIO); 347 SVCSTR(WMI_SERVICE_STA_DTIM_PS_MODULATED_DTIM); 348 SVCSTR(WMI_SERVICE_STA_UAPSD_BASIC_AUTO_TRIG); 349 SVCSTR(WMI_SERVICE_STA_UAPSD_VAR_AUTO_TRIG); 350 SVCSTR(WMI_SERVICE_STA_KEEP_ALIVE); 351 SVCSTR(WMI_SERVICE_TX_ENCAP); 352 SVCSTR(WMI_SERVICE_BURST); 353 SVCSTR(WMI_SERVICE_SMART_ANTENNA_SW_SUPPORT); 354 SVCSTR(WMI_SERVICE_SMART_ANTENNA_HW_SUPPORT); 355 SVCSTR(WMI_SERVICE_ROAM_SCAN_OFFLOAD); 356 SVCSTR(WMI_SERVICE_AP_PS_DETECT_OUT_OF_SYNC); 357 SVCSTR(WMI_SERVICE_EARLY_RX); 358 SVCSTR(WMI_SERVICE_STA_SMPS); 359 SVCSTR(WMI_SERVICE_FWTEST); 360 SVCSTR(WMI_SERVICE_STA_WMMAC); 361 SVCSTR(WMI_SERVICE_TDLS); 362 SVCSTR(WMI_SERVICE_MCC_BCN_INTERVAL_CHANGE); 363 SVCSTR(WMI_SERVICE_ADAPTIVE_OCS); 364 SVCSTR(WMI_SERVICE_BA_SSN_SUPPORT); 365 SVCSTR(WMI_SERVICE_FILTER_IPSEC_NATKEEPALIVE); 366 SVCSTR(WMI_SERVICE_WLAN_HB); 367 SVCSTR(WMI_SERVICE_LTE_ANT_SHARE_SUPPORT); 368 SVCSTR(WMI_SERVICE_BATCH_SCAN); 369 SVCSTR(WMI_SERVICE_QPOWER); 370 SVCSTR(WMI_SERVICE_PLMREQ); 371 SVCSTR(WMI_SERVICE_THERMAL_MGMT); 372 SVCSTR(WMI_SERVICE_RMC); 373 SVCSTR(WMI_SERVICE_MHF_OFFLOAD); 374 SVCSTR(WMI_SERVICE_COEX_SAR); 375 SVCSTR(WMI_SERVICE_BCN_TXRATE_OVERRIDE); 376 SVCSTR(WMI_SERVICE_NAN); 377 SVCSTR(WMI_SERVICE_L1SS_STAT); 378 SVCSTR(WMI_SERVICE_ESTIMATE_LINKSPEED); 379 SVCSTR(WMI_SERVICE_OBSS_SCAN); 380 SVCSTR(WMI_SERVICE_TDLS_OFFCHAN); 381 SVCSTR(WMI_SERVICE_TDLS_UAPSD_BUFFER_STA); 382 SVCSTR(WMI_SERVICE_TDLS_UAPSD_SLEEP_STA); 383 SVCSTR(WMI_SERVICE_IBSS_PWRSAVE); 384 SVCSTR(WMI_SERVICE_LPASS); 385 SVCSTR(WMI_SERVICE_EXTSCAN); 386 SVCSTR(WMI_SERVICE_D0WOW); 387 SVCSTR(WMI_SERVICE_HSOFFLOAD); 388 SVCSTR(WMI_SERVICE_ROAM_HO_OFFLOAD); 389 SVCSTR(WMI_SERVICE_RX_FULL_REORDER); 390 SVCSTR(WMI_SERVICE_DHCP_OFFLOAD); 391 SVCSTR(WMI_SERVICE_STA_RX_IPA_OFFLOAD_SUPPORT); 392 SVCSTR(WMI_SERVICE_MDNS_OFFLOAD); 393 SVCSTR(WMI_SERVICE_SAP_AUTH_OFFLOAD); 394 SVCSTR(WMI_SERVICE_ATF); 395 SVCSTR(WMI_SERVICE_COEX_GPIO); 396 SVCSTR(WMI_SERVICE_ENHANCED_PROXY_STA); 397 SVCSTR(WMI_SERVICE_TT); 398 SVCSTR(WMI_SERVICE_PEER_CACHING); 399 SVCSTR(WMI_SERVICE_AUX_SPECTRAL_INTF); 400 SVCSTR(WMI_SERVICE_AUX_CHAN_LOAD_INTF); 401 SVCSTR(WMI_SERVICE_BSS_CHANNEL_INFO_64); 402 SVCSTR(WMI_SERVICE_EXT_RES_CFG_SUPPORT); 403 SVCSTR(WMI_SERVICE_MESH_11S); 404 SVCSTR(WMI_SERVICE_MESH_NON_11S); 405 SVCSTR(WMI_SERVICE_PEER_STATS); 406 SVCSTR(WMI_SERVICE_RESTRT_CHNL_SUPPORT); 407 SVCSTR(WMI_SERVICE_PERIODIC_CHAN_STAT_SUPPORT); 408 SVCSTR(WMI_SERVICE_TX_MODE_PUSH_ONLY); 409 SVCSTR(WMI_SERVICE_TX_MODE_PUSH_PULL); 410 SVCSTR(WMI_SERVICE_TX_MODE_DYNAMIC); 411 default: 412 return NULL; 413 } 414 415 #undef SVCSTR 416 } 417 418 #define WMI_SERVICE_IS_ENABLED(wmi_svc_bmap, svc_id, len) \ 419 ((svc_id) < (len) && \ 420 __le32_to_cpu((wmi_svc_bmap)[(svc_id) / (sizeof(u32))]) & \ 421 BIT((svc_id) % (sizeof(u32)))) 422 423 #define SVCMAP(x, y, len) \ 424 do { \ 425 if (WMI_SERVICE_IS_ENABLED((in), (x), (len))) \ 426 __set_bit(y, out); \ 427 } while (0) 428 429 static inline void wmi_10x_svc_map(const __le32 *in, unsigned long *out, 430 size_t len) 431 { 432 SVCMAP(WMI_10X_SERVICE_BEACON_OFFLOAD, 433 WMI_SERVICE_BEACON_OFFLOAD, len); 434 SVCMAP(WMI_10X_SERVICE_SCAN_OFFLOAD, 435 WMI_SERVICE_SCAN_OFFLOAD, len); 436 SVCMAP(WMI_10X_SERVICE_ROAM_OFFLOAD, 437 WMI_SERVICE_ROAM_OFFLOAD, len); 438 SVCMAP(WMI_10X_SERVICE_BCN_MISS_OFFLOAD, 439 WMI_SERVICE_BCN_MISS_OFFLOAD, len); 440 SVCMAP(WMI_10X_SERVICE_STA_PWRSAVE, 441 WMI_SERVICE_STA_PWRSAVE, len); 442 SVCMAP(WMI_10X_SERVICE_STA_ADVANCED_PWRSAVE, 443 WMI_SERVICE_STA_ADVANCED_PWRSAVE, len); 444 SVCMAP(WMI_10X_SERVICE_AP_UAPSD, 445 WMI_SERVICE_AP_UAPSD, len); 446 SVCMAP(WMI_10X_SERVICE_AP_DFS, 447 WMI_SERVICE_AP_DFS, len); 448 SVCMAP(WMI_10X_SERVICE_11AC, 449 WMI_SERVICE_11AC, len); 450 SVCMAP(WMI_10X_SERVICE_BLOCKACK, 451 WMI_SERVICE_BLOCKACK, len); 452 SVCMAP(WMI_10X_SERVICE_PHYERR, 453 WMI_SERVICE_PHYERR, len); 454 SVCMAP(WMI_10X_SERVICE_BCN_FILTER, 455 WMI_SERVICE_BCN_FILTER, len); 456 SVCMAP(WMI_10X_SERVICE_RTT, 457 WMI_SERVICE_RTT, len); 458 SVCMAP(WMI_10X_SERVICE_RATECTRL, 459 WMI_SERVICE_RATECTRL, len); 460 SVCMAP(WMI_10X_SERVICE_WOW, 461 WMI_SERVICE_WOW, len); 462 SVCMAP(WMI_10X_SERVICE_RATECTRL_CACHE, 463 WMI_SERVICE_RATECTRL_CACHE, len); 464 SVCMAP(WMI_10X_SERVICE_IRAM_TIDS, 465 WMI_SERVICE_IRAM_TIDS, len); 466 SVCMAP(WMI_10X_SERVICE_BURST, 467 WMI_SERVICE_BURST, len); 468 SVCMAP(WMI_10X_SERVICE_SMART_ANTENNA_SW_SUPPORT, 469 WMI_SERVICE_SMART_ANTENNA_SW_SUPPORT, len); 470 SVCMAP(WMI_10X_SERVICE_FORCE_FW_HANG, 471 WMI_SERVICE_FORCE_FW_HANG, len); 472 SVCMAP(WMI_10X_SERVICE_SMART_ANTENNA_HW_SUPPORT, 473 WMI_SERVICE_SMART_ANTENNA_HW_SUPPORT, len); 474 SVCMAP(WMI_10X_SERVICE_ATF, 475 WMI_SERVICE_ATF, len); 476 SVCMAP(WMI_10X_SERVICE_COEX_GPIO, 477 WMI_SERVICE_COEX_GPIO, len); 478 SVCMAP(WMI_10X_SERVICE_AUX_SPECTRAL_INTF, 479 WMI_SERVICE_AUX_SPECTRAL_INTF, len); 480 SVCMAP(WMI_10X_SERVICE_AUX_CHAN_LOAD_INTF, 481 WMI_SERVICE_AUX_CHAN_LOAD_INTF, len); 482 SVCMAP(WMI_10X_SERVICE_BSS_CHANNEL_INFO_64, 483 WMI_SERVICE_BSS_CHANNEL_INFO_64, len); 484 SVCMAP(WMI_10X_SERVICE_MESH, 485 WMI_SERVICE_MESH_11S, len); 486 SVCMAP(WMI_10X_SERVICE_EXT_RES_CFG_SUPPORT, 487 WMI_SERVICE_EXT_RES_CFG_SUPPORT, len); 488 SVCMAP(WMI_10X_SERVICE_PEER_STATS, 489 WMI_SERVICE_PEER_STATS, len); 490 } 491 492 static inline void wmi_main_svc_map(const __le32 *in, unsigned long *out, 493 size_t len) 494 { 495 SVCMAP(WMI_MAIN_SERVICE_BEACON_OFFLOAD, 496 WMI_SERVICE_BEACON_OFFLOAD, len); 497 SVCMAP(WMI_MAIN_SERVICE_SCAN_OFFLOAD, 498 WMI_SERVICE_SCAN_OFFLOAD, len); 499 SVCMAP(WMI_MAIN_SERVICE_ROAM_OFFLOAD, 500 WMI_SERVICE_ROAM_OFFLOAD, len); 501 SVCMAP(WMI_MAIN_SERVICE_BCN_MISS_OFFLOAD, 502 WMI_SERVICE_BCN_MISS_OFFLOAD, len); 503 SVCMAP(WMI_MAIN_SERVICE_STA_PWRSAVE, 504 WMI_SERVICE_STA_PWRSAVE, len); 505 SVCMAP(WMI_MAIN_SERVICE_STA_ADVANCED_PWRSAVE, 506 WMI_SERVICE_STA_ADVANCED_PWRSAVE, len); 507 SVCMAP(WMI_MAIN_SERVICE_AP_UAPSD, 508 WMI_SERVICE_AP_UAPSD, len); 509 SVCMAP(WMI_MAIN_SERVICE_AP_DFS, 510 WMI_SERVICE_AP_DFS, len); 511 SVCMAP(WMI_MAIN_SERVICE_11AC, 512 WMI_SERVICE_11AC, len); 513 SVCMAP(WMI_MAIN_SERVICE_BLOCKACK, 514 WMI_SERVICE_BLOCKACK, len); 515 SVCMAP(WMI_MAIN_SERVICE_PHYERR, 516 WMI_SERVICE_PHYERR, len); 517 SVCMAP(WMI_MAIN_SERVICE_BCN_FILTER, 518 WMI_SERVICE_BCN_FILTER, len); 519 SVCMAP(WMI_MAIN_SERVICE_RTT, 520 WMI_SERVICE_RTT, len); 521 SVCMAP(WMI_MAIN_SERVICE_RATECTRL, 522 WMI_SERVICE_RATECTRL, len); 523 SVCMAP(WMI_MAIN_SERVICE_WOW, 524 WMI_SERVICE_WOW, len); 525 SVCMAP(WMI_MAIN_SERVICE_RATECTRL_CACHE, 526 WMI_SERVICE_RATECTRL_CACHE, len); 527 SVCMAP(WMI_MAIN_SERVICE_IRAM_TIDS, 528 WMI_SERVICE_IRAM_TIDS, len); 529 SVCMAP(WMI_MAIN_SERVICE_ARPNS_OFFLOAD, 530 WMI_SERVICE_ARPNS_OFFLOAD, len); 531 SVCMAP(WMI_MAIN_SERVICE_NLO, 532 WMI_SERVICE_NLO, len); 533 SVCMAP(WMI_MAIN_SERVICE_GTK_OFFLOAD, 534 WMI_SERVICE_GTK_OFFLOAD, len); 535 SVCMAP(WMI_MAIN_SERVICE_SCAN_SCH, 536 WMI_SERVICE_SCAN_SCH, len); 537 SVCMAP(WMI_MAIN_SERVICE_CSA_OFFLOAD, 538 WMI_SERVICE_CSA_OFFLOAD, len); 539 SVCMAP(WMI_MAIN_SERVICE_CHATTER, 540 WMI_SERVICE_CHATTER, len); 541 SVCMAP(WMI_MAIN_SERVICE_COEX_FREQAVOID, 542 WMI_SERVICE_COEX_FREQAVOID, len); 543 SVCMAP(WMI_MAIN_SERVICE_PACKET_POWER_SAVE, 544 WMI_SERVICE_PACKET_POWER_SAVE, len); 545 SVCMAP(WMI_MAIN_SERVICE_FORCE_FW_HANG, 546 WMI_SERVICE_FORCE_FW_HANG, len); 547 SVCMAP(WMI_MAIN_SERVICE_GPIO, 548 WMI_SERVICE_GPIO, len); 549 SVCMAP(WMI_MAIN_SERVICE_STA_DTIM_PS_MODULATED_DTIM, 550 WMI_SERVICE_STA_DTIM_PS_MODULATED_DTIM, len); 551 SVCMAP(WMI_MAIN_SERVICE_STA_UAPSD_BASIC_AUTO_TRIG, 552 WMI_SERVICE_STA_UAPSD_BASIC_AUTO_TRIG, len); 553 SVCMAP(WMI_MAIN_SERVICE_STA_UAPSD_VAR_AUTO_TRIG, 554 WMI_SERVICE_STA_UAPSD_VAR_AUTO_TRIG, len); 555 SVCMAP(WMI_MAIN_SERVICE_STA_KEEP_ALIVE, 556 WMI_SERVICE_STA_KEEP_ALIVE, len); 557 SVCMAP(WMI_MAIN_SERVICE_TX_ENCAP, 558 WMI_SERVICE_TX_ENCAP, len); 559 } 560 561 static inline void wmi_10_4_svc_map(const __le32 *in, unsigned long *out, 562 size_t len) 563 { 564 SVCMAP(WMI_10_4_SERVICE_BEACON_OFFLOAD, 565 WMI_SERVICE_BEACON_OFFLOAD, len); 566 SVCMAP(WMI_10_4_SERVICE_SCAN_OFFLOAD, 567 WMI_SERVICE_SCAN_OFFLOAD, len); 568 SVCMAP(WMI_10_4_SERVICE_ROAM_OFFLOAD, 569 WMI_SERVICE_ROAM_OFFLOAD, len); 570 SVCMAP(WMI_10_4_SERVICE_BCN_MISS_OFFLOAD, 571 WMI_SERVICE_BCN_MISS_OFFLOAD, len); 572 SVCMAP(WMI_10_4_SERVICE_STA_PWRSAVE, 573 WMI_SERVICE_STA_PWRSAVE, len); 574 SVCMAP(WMI_10_4_SERVICE_STA_ADVANCED_PWRSAVE, 575 WMI_SERVICE_STA_ADVANCED_PWRSAVE, len); 576 SVCMAP(WMI_10_4_SERVICE_AP_UAPSD, 577 WMI_SERVICE_AP_UAPSD, len); 578 SVCMAP(WMI_10_4_SERVICE_AP_DFS, 579 WMI_SERVICE_AP_DFS, len); 580 SVCMAP(WMI_10_4_SERVICE_11AC, 581 WMI_SERVICE_11AC, len); 582 SVCMAP(WMI_10_4_SERVICE_BLOCKACK, 583 WMI_SERVICE_BLOCKACK, len); 584 SVCMAP(WMI_10_4_SERVICE_PHYERR, 585 WMI_SERVICE_PHYERR, len); 586 SVCMAP(WMI_10_4_SERVICE_BCN_FILTER, 587 WMI_SERVICE_BCN_FILTER, len); 588 SVCMAP(WMI_10_4_SERVICE_RTT, 589 WMI_SERVICE_RTT, len); 590 SVCMAP(WMI_10_4_SERVICE_RATECTRL, 591 WMI_SERVICE_RATECTRL, len); 592 SVCMAP(WMI_10_4_SERVICE_WOW, 593 WMI_SERVICE_WOW, len); 594 SVCMAP(WMI_10_4_SERVICE_RATECTRL_CACHE, 595 WMI_SERVICE_RATECTRL_CACHE, len); 596 SVCMAP(WMI_10_4_SERVICE_IRAM_TIDS, 597 WMI_SERVICE_IRAM_TIDS, len); 598 SVCMAP(WMI_10_4_SERVICE_BURST, 599 WMI_SERVICE_BURST, len); 600 SVCMAP(WMI_10_4_SERVICE_SMART_ANTENNA_SW_SUPPORT, 601 WMI_SERVICE_SMART_ANTENNA_SW_SUPPORT, len); 602 SVCMAP(WMI_10_4_SERVICE_GTK_OFFLOAD, 603 WMI_SERVICE_GTK_OFFLOAD, len); 604 SVCMAP(WMI_10_4_SERVICE_SCAN_SCH, 605 WMI_SERVICE_SCAN_SCH, len); 606 SVCMAP(WMI_10_4_SERVICE_CSA_OFFLOAD, 607 WMI_SERVICE_CSA_OFFLOAD, len); 608 SVCMAP(WMI_10_4_SERVICE_CHATTER, 609 WMI_SERVICE_CHATTER, len); 610 SVCMAP(WMI_10_4_SERVICE_COEX_FREQAVOID, 611 WMI_SERVICE_COEX_FREQAVOID, len); 612 SVCMAP(WMI_10_4_SERVICE_PACKET_POWER_SAVE, 613 WMI_SERVICE_PACKET_POWER_SAVE, len); 614 SVCMAP(WMI_10_4_SERVICE_FORCE_FW_HANG, 615 WMI_SERVICE_FORCE_FW_HANG, len); 616 SVCMAP(WMI_10_4_SERVICE_SMART_ANTENNA_HW_SUPPORT, 617 WMI_SERVICE_SMART_ANTENNA_HW_SUPPORT, len); 618 SVCMAP(WMI_10_4_SERVICE_GPIO, 619 WMI_SERVICE_GPIO, len); 620 SVCMAP(WMI_10_4_SERVICE_STA_UAPSD_BASIC_AUTO_TRIG, 621 WMI_SERVICE_STA_UAPSD_BASIC_AUTO_TRIG, len); 622 SVCMAP(WMI_10_4_SERVICE_STA_UAPSD_VAR_AUTO_TRIG, 623 WMI_SERVICE_STA_UAPSD_VAR_AUTO_TRIG, len); 624 SVCMAP(WMI_10_4_SERVICE_STA_KEEP_ALIVE, 625 WMI_SERVICE_STA_KEEP_ALIVE, len); 626 SVCMAP(WMI_10_4_SERVICE_TX_ENCAP, 627 WMI_SERVICE_TX_ENCAP, len); 628 SVCMAP(WMI_10_4_SERVICE_AP_PS_DETECT_OUT_OF_SYNC, 629 WMI_SERVICE_AP_PS_DETECT_OUT_OF_SYNC, len); 630 SVCMAP(WMI_10_4_SERVICE_EARLY_RX, 631 WMI_SERVICE_EARLY_RX, len); 632 SVCMAP(WMI_10_4_SERVICE_ENHANCED_PROXY_STA, 633 WMI_SERVICE_ENHANCED_PROXY_STA, len); 634 SVCMAP(WMI_10_4_SERVICE_TT, 635 WMI_SERVICE_TT, len); 636 SVCMAP(WMI_10_4_SERVICE_ATF, 637 WMI_SERVICE_ATF, len); 638 SVCMAP(WMI_10_4_SERVICE_PEER_CACHING, 639 WMI_SERVICE_PEER_CACHING, len); 640 SVCMAP(WMI_10_4_SERVICE_COEX_GPIO, 641 WMI_SERVICE_COEX_GPIO, len); 642 SVCMAP(WMI_10_4_SERVICE_AUX_SPECTRAL_INTF, 643 WMI_SERVICE_AUX_SPECTRAL_INTF, len); 644 SVCMAP(WMI_10_4_SERVICE_AUX_CHAN_LOAD_INTF, 645 WMI_SERVICE_AUX_CHAN_LOAD_INTF, len); 646 SVCMAP(WMI_10_4_SERVICE_BSS_CHANNEL_INFO_64, 647 WMI_SERVICE_BSS_CHANNEL_INFO_64, len); 648 SVCMAP(WMI_10_4_SERVICE_EXT_RES_CFG_SUPPORT, 649 WMI_SERVICE_EXT_RES_CFG_SUPPORT, len); 650 SVCMAP(WMI_10_4_SERVICE_MESH_NON_11S, 651 WMI_SERVICE_MESH_NON_11S, len); 652 SVCMAP(WMI_10_4_SERVICE_RESTRT_CHNL_SUPPORT, 653 WMI_SERVICE_RESTRT_CHNL_SUPPORT, len); 654 SVCMAP(WMI_10_4_SERVICE_PEER_STATS, 655 WMI_SERVICE_PEER_STATS, len); 656 SVCMAP(WMI_10_4_SERVICE_MESH_11S, 657 WMI_SERVICE_MESH_11S, len); 658 SVCMAP(WMI_10_4_SERVICE_PERIODIC_CHAN_STAT_SUPPORT, 659 WMI_SERVICE_PERIODIC_CHAN_STAT_SUPPORT, len); 660 SVCMAP(WMI_10_4_SERVICE_TX_MODE_PUSH_ONLY, 661 WMI_SERVICE_TX_MODE_PUSH_ONLY, len); 662 SVCMAP(WMI_10_4_SERVICE_TX_MODE_PUSH_PULL, 663 WMI_SERVICE_TX_MODE_PUSH_PULL, len); 664 SVCMAP(WMI_10_4_SERVICE_TX_MODE_DYNAMIC, 665 WMI_SERVICE_TX_MODE_DYNAMIC, len); 666 } 667 668 #undef SVCMAP 669 670 /* 2 word representation of MAC addr */ 671 struct wmi_mac_addr { 672 union { 673 u8 addr[6]; 674 struct { 675 u32 word0; 676 u32 word1; 677 } __packed; 678 } __packed; 679 } __packed; 680 681 struct wmi_cmd_map { 682 u32 init_cmdid; 683 u32 start_scan_cmdid; 684 u32 stop_scan_cmdid; 685 u32 scan_chan_list_cmdid; 686 u32 scan_sch_prio_tbl_cmdid; 687 u32 pdev_set_regdomain_cmdid; 688 u32 pdev_set_channel_cmdid; 689 u32 pdev_set_param_cmdid; 690 u32 pdev_pktlog_enable_cmdid; 691 u32 pdev_pktlog_disable_cmdid; 692 u32 pdev_set_wmm_params_cmdid; 693 u32 pdev_set_ht_cap_ie_cmdid; 694 u32 pdev_set_vht_cap_ie_cmdid; 695 u32 pdev_set_dscp_tid_map_cmdid; 696 u32 pdev_set_quiet_mode_cmdid; 697 u32 pdev_green_ap_ps_enable_cmdid; 698 u32 pdev_get_tpc_config_cmdid; 699 u32 pdev_set_base_macaddr_cmdid; 700 u32 vdev_create_cmdid; 701 u32 vdev_delete_cmdid; 702 u32 vdev_start_request_cmdid; 703 u32 vdev_restart_request_cmdid; 704 u32 vdev_up_cmdid; 705 u32 vdev_stop_cmdid; 706 u32 vdev_down_cmdid; 707 u32 vdev_set_param_cmdid; 708 u32 vdev_install_key_cmdid; 709 u32 peer_create_cmdid; 710 u32 peer_delete_cmdid; 711 u32 peer_flush_tids_cmdid; 712 u32 peer_set_param_cmdid; 713 u32 peer_assoc_cmdid; 714 u32 peer_add_wds_entry_cmdid; 715 u32 peer_remove_wds_entry_cmdid; 716 u32 peer_mcast_group_cmdid; 717 u32 bcn_tx_cmdid; 718 u32 pdev_send_bcn_cmdid; 719 u32 bcn_tmpl_cmdid; 720 u32 bcn_filter_rx_cmdid; 721 u32 prb_req_filter_rx_cmdid; 722 u32 mgmt_tx_cmdid; 723 u32 prb_tmpl_cmdid; 724 u32 addba_clear_resp_cmdid; 725 u32 addba_send_cmdid; 726 u32 addba_status_cmdid; 727 u32 delba_send_cmdid; 728 u32 addba_set_resp_cmdid; 729 u32 send_singleamsdu_cmdid; 730 u32 sta_powersave_mode_cmdid; 731 u32 sta_powersave_param_cmdid; 732 u32 sta_mimo_ps_mode_cmdid; 733 u32 pdev_dfs_enable_cmdid; 734 u32 pdev_dfs_disable_cmdid; 735 u32 roam_scan_mode; 736 u32 roam_scan_rssi_threshold; 737 u32 roam_scan_period; 738 u32 roam_scan_rssi_change_threshold; 739 u32 roam_ap_profile; 740 u32 ofl_scan_add_ap_profile; 741 u32 ofl_scan_remove_ap_profile; 742 u32 ofl_scan_period; 743 u32 p2p_dev_set_device_info; 744 u32 p2p_dev_set_discoverability; 745 u32 p2p_go_set_beacon_ie; 746 u32 p2p_go_set_probe_resp_ie; 747 u32 p2p_set_vendor_ie_data_cmdid; 748 u32 ap_ps_peer_param_cmdid; 749 u32 ap_ps_peer_uapsd_coex_cmdid; 750 u32 peer_rate_retry_sched_cmdid; 751 u32 wlan_profile_trigger_cmdid; 752 u32 wlan_profile_set_hist_intvl_cmdid; 753 u32 wlan_profile_get_profile_data_cmdid; 754 u32 wlan_profile_enable_profile_id_cmdid; 755 u32 wlan_profile_list_profile_id_cmdid; 756 u32 pdev_suspend_cmdid; 757 u32 pdev_resume_cmdid; 758 u32 add_bcn_filter_cmdid; 759 u32 rmv_bcn_filter_cmdid; 760 u32 wow_add_wake_pattern_cmdid; 761 u32 wow_del_wake_pattern_cmdid; 762 u32 wow_enable_disable_wake_event_cmdid; 763 u32 wow_enable_cmdid; 764 u32 wow_hostwakeup_from_sleep_cmdid; 765 u32 rtt_measreq_cmdid; 766 u32 rtt_tsf_cmdid; 767 u32 vdev_spectral_scan_configure_cmdid; 768 u32 vdev_spectral_scan_enable_cmdid; 769 u32 request_stats_cmdid; 770 u32 set_arp_ns_offload_cmdid; 771 u32 network_list_offload_config_cmdid; 772 u32 gtk_offload_cmdid; 773 u32 csa_offload_enable_cmdid; 774 u32 csa_offload_chanswitch_cmdid; 775 u32 chatter_set_mode_cmdid; 776 u32 peer_tid_addba_cmdid; 777 u32 peer_tid_delba_cmdid; 778 u32 sta_dtim_ps_method_cmdid; 779 u32 sta_uapsd_auto_trig_cmdid; 780 u32 sta_keepalive_cmd; 781 u32 echo_cmdid; 782 u32 pdev_utf_cmdid; 783 u32 dbglog_cfg_cmdid; 784 u32 pdev_qvit_cmdid; 785 u32 pdev_ftm_intg_cmdid; 786 u32 vdev_set_keepalive_cmdid; 787 u32 vdev_get_keepalive_cmdid; 788 u32 force_fw_hang_cmdid; 789 u32 gpio_config_cmdid; 790 u32 gpio_output_cmdid; 791 u32 pdev_get_temperature_cmdid; 792 u32 vdev_set_wmm_params_cmdid; 793 u32 tdls_set_state_cmdid; 794 u32 tdls_peer_update_cmdid; 795 u32 adaptive_qcs_cmdid; 796 u32 scan_update_request_cmdid; 797 u32 vdev_standby_response_cmdid; 798 u32 vdev_resume_response_cmdid; 799 u32 wlan_peer_caching_add_peer_cmdid; 800 u32 wlan_peer_caching_evict_peer_cmdid; 801 u32 wlan_peer_caching_restore_peer_cmdid; 802 u32 wlan_peer_caching_print_all_peers_info_cmdid; 803 u32 peer_update_wds_entry_cmdid; 804 u32 peer_add_proxy_sta_entry_cmdid; 805 u32 rtt_keepalive_cmdid; 806 u32 oem_req_cmdid; 807 u32 nan_cmdid; 808 u32 vdev_ratemask_cmdid; 809 u32 qboost_cfg_cmdid; 810 u32 pdev_smart_ant_enable_cmdid; 811 u32 pdev_smart_ant_set_rx_antenna_cmdid; 812 u32 peer_smart_ant_set_tx_antenna_cmdid; 813 u32 peer_smart_ant_set_train_info_cmdid; 814 u32 peer_smart_ant_set_node_config_ops_cmdid; 815 u32 pdev_set_antenna_switch_table_cmdid; 816 u32 pdev_set_ctl_table_cmdid; 817 u32 pdev_set_mimogain_table_cmdid; 818 u32 pdev_ratepwr_table_cmdid; 819 u32 pdev_ratepwr_chainmsk_table_cmdid; 820 u32 pdev_fips_cmdid; 821 u32 tt_set_conf_cmdid; 822 u32 fwtest_cmdid; 823 u32 vdev_atf_request_cmdid; 824 u32 peer_atf_request_cmdid; 825 u32 pdev_get_ani_cck_config_cmdid; 826 u32 pdev_get_ani_ofdm_config_cmdid; 827 u32 pdev_reserve_ast_entry_cmdid; 828 u32 pdev_get_nfcal_power_cmdid; 829 u32 pdev_get_tpc_cmdid; 830 u32 pdev_get_ast_info_cmdid; 831 u32 vdev_set_dscp_tid_map_cmdid; 832 u32 pdev_get_info_cmdid; 833 u32 vdev_get_info_cmdid; 834 u32 vdev_filter_neighbor_rx_packets_cmdid; 835 u32 mu_cal_start_cmdid; 836 u32 set_cca_params_cmdid; 837 u32 pdev_bss_chan_info_request_cmdid; 838 u32 pdev_enable_adaptive_cca_cmdid; 839 u32 ext_resource_cfg_cmdid; 840 }; 841 842 /* 843 * wmi command groups. 844 */ 845 enum wmi_cmd_group { 846 /* 0 to 2 are reserved */ 847 WMI_GRP_START = 0x3, 848 WMI_GRP_SCAN = WMI_GRP_START, 849 WMI_GRP_PDEV, 850 WMI_GRP_VDEV, 851 WMI_GRP_PEER, 852 WMI_GRP_MGMT, 853 WMI_GRP_BA_NEG, 854 WMI_GRP_STA_PS, 855 WMI_GRP_DFS, 856 WMI_GRP_ROAM, 857 WMI_GRP_OFL_SCAN, 858 WMI_GRP_P2P, 859 WMI_GRP_AP_PS, 860 WMI_GRP_RATE_CTRL, 861 WMI_GRP_PROFILE, 862 WMI_GRP_SUSPEND, 863 WMI_GRP_BCN_FILTER, 864 WMI_GRP_WOW, 865 WMI_GRP_RTT, 866 WMI_GRP_SPECTRAL, 867 WMI_GRP_STATS, 868 WMI_GRP_ARP_NS_OFL, 869 WMI_GRP_NLO_OFL, 870 WMI_GRP_GTK_OFL, 871 WMI_GRP_CSA_OFL, 872 WMI_GRP_CHATTER, 873 WMI_GRP_TID_ADDBA, 874 WMI_GRP_MISC, 875 WMI_GRP_GPIO, 876 }; 877 878 #define WMI_CMD_GRP(grp_id) (((grp_id) << 12) | 0x1) 879 #define WMI_EVT_GRP_START_ID(grp_id) (((grp_id) << 12) | 0x1) 880 881 #define WMI_CMD_UNSUPPORTED 0 882 883 /* Command IDs and command events for MAIN FW. */ 884 enum wmi_cmd_id { 885 WMI_INIT_CMDID = 0x1, 886 887 /* Scan specific commands */ 888 WMI_START_SCAN_CMDID = WMI_CMD_GRP(WMI_GRP_SCAN), 889 WMI_STOP_SCAN_CMDID, 890 WMI_SCAN_CHAN_LIST_CMDID, 891 WMI_SCAN_SCH_PRIO_TBL_CMDID, 892 893 /* PDEV (physical device) specific commands */ 894 WMI_PDEV_SET_REGDOMAIN_CMDID = WMI_CMD_GRP(WMI_GRP_PDEV), 895 WMI_PDEV_SET_CHANNEL_CMDID, 896 WMI_PDEV_SET_PARAM_CMDID, 897 WMI_PDEV_PKTLOG_ENABLE_CMDID, 898 WMI_PDEV_PKTLOG_DISABLE_CMDID, 899 WMI_PDEV_SET_WMM_PARAMS_CMDID, 900 WMI_PDEV_SET_HT_CAP_IE_CMDID, 901 WMI_PDEV_SET_VHT_CAP_IE_CMDID, 902 WMI_PDEV_SET_DSCP_TID_MAP_CMDID, 903 WMI_PDEV_SET_QUIET_MODE_CMDID, 904 WMI_PDEV_GREEN_AP_PS_ENABLE_CMDID, 905 WMI_PDEV_GET_TPC_CONFIG_CMDID, 906 WMI_PDEV_SET_BASE_MACADDR_CMDID, 907 908 /* VDEV (virtual device) specific commands */ 909 WMI_VDEV_CREATE_CMDID = WMI_CMD_GRP(WMI_GRP_VDEV), 910 WMI_VDEV_DELETE_CMDID, 911 WMI_VDEV_START_REQUEST_CMDID, 912 WMI_VDEV_RESTART_REQUEST_CMDID, 913 WMI_VDEV_UP_CMDID, 914 WMI_VDEV_STOP_CMDID, 915 WMI_VDEV_DOWN_CMDID, 916 WMI_VDEV_SET_PARAM_CMDID, 917 WMI_VDEV_INSTALL_KEY_CMDID, 918 919 /* peer specific commands */ 920 WMI_PEER_CREATE_CMDID = WMI_CMD_GRP(WMI_GRP_PEER), 921 WMI_PEER_DELETE_CMDID, 922 WMI_PEER_FLUSH_TIDS_CMDID, 923 WMI_PEER_SET_PARAM_CMDID, 924 WMI_PEER_ASSOC_CMDID, 925 WMI_PEER_ADD_WDS_ENTRY_CMDID, 926 WMI_PEER_REMOVE_WDS_ENTRY_CMDID, 927 WMI_PEER_MCAST_GROUP_CMDID, 928 929 /* beacon/management specific commands */ 930 WMI_BCN_TX_CMDID = WMI_CMD_GRP(WMI_GRP_MGMT), 931 WMI_PDEV_SEND_BCN_CMDID, 932 WMI_BCN_TMPL_CMDID, 933 WMI_BCN_FILTER_RX_CMDID, 934 WMI_PRB_REQ_FILTER_RX_CMDID, 935 WMI_MGMT_TX_CMDID, 936 WMI_PRB_TMPL_CMDID, 937 938 /* commands to directly control BA negotiation directly from host. */ 939 WMI_ADDBA_CLEAR_RESP_CMDID = WMI_CMD_GRP(WMI_GRP_BA_NEG), 940 WMI_ADDBA_SEND_CMDID, 941 WMI_ADDBA_STATUS_CMDID, 942 WMI_DELBA_SEND_CMDID, 943 WMI_ADDBA_SET_RESP_CMDID, 944 WMI_SEND_SINGLEAMSDU_CMDID, 945 946 /* Station power save specific config */ 947 WMI_STA_POWERSAVE_MODE_CMDID = WMI_CMD_GRP(WMI_GRP_STA_PS), 948 WMI_STA_POWERSAVE_PARAM_CMDID, 949 WMI_STA_MIMO_PS_MODE_CMDID, 950 951 /** DFS-specific commands */ 952 WMI_PDEV_DFS_ENABLE_CMDID = WMI_CMD_GRP(WMI_GRP_DFS), 953 WMI_PDEV_DFS_DISABLE_CMDID, 954 955 /* Roaming specific commands */ 956 WMI_ROAM_SCAN_MODE = WMI_CMD_GRP(WMI_GRP_ROAM), 957 WMI_ROAM_SCAN_RSSI_THRESHOLD, 958 WMI_ROAM_SCAN_PERIOD, 959 WMI_ROAM_SCAN_RSSI_CHANGE_THRESHOLD, 960 WMI_ROAM_AP_PROFILE, 961 962 /* offload scan specific commands */ 963 WMI_OFL_SCAN_ADD_AP_PROFILE = WMI_CMD_GRP(WMI_GRP_OFL_SCAN), 964 WMI_OFL_SCAN_REMOVE_AP_PROFILE, 965 WMI_OFL_SCAN_PERIOD, 966 967 /* P2P specific commands */ 968 WMI_P2P_DEV_SET_DEVICE_INFO = WMI_CMD_GRP(WMI_GRP_P2P), 969 WMI_P2P_DEV_SET_DISCOVERABILITY, 970 WMI_P2P_GO_SET_BEACON_IE, 971 WMI_P2P_GO_SET_PROBE_RESP_IE, 972 WMI_P2P_SET_VENDOR_IE_DATA_CMDID, 973 974 /* AP power save specific config */ 975 WMI_AP_PS_PEER_PARAM_CMDID = WMI_CMD_GRP(WMI_GRP_AP_PS), 976 WMI_AP_PS_PEER_UAPSD_COEX_CMDID, 977 978 /* Rate-control specific commands */ 979 WMI_PEER_RATE_RETRY_SCHED_CMDID = 980 WMI_CMD_GRP(WMI_GRP_RATE_CTRL), 981 982 /* WLAN Profiling commands. */ 983 WMI_WLAN_PROFILE_TRIGGER_CMDID = WMI_CMD_GRP(WMI_GRP_PROFILE), 984 WMI_WLAN_PROFILE_SET_HIST_INTVL_CMDID, 985 WMI_WLAN_PROFILE_GET_PROFILE_DATA_CMDID, 986 WMI_WLAN_PROFILE_ENABLE_PROFILE_ID_CMDID, 987 WMI_WLAN_PROFILE_LIST_PROFILE_ID_CMDID, 988 989 /* Suspend resume command Ids */ 990 WMI_PDEV_SUSPEND_CMDID = WMI_CMD_GRP(WMI_GRP_SUSPEND), 991 WMI_PDEV_RESUME_CMDID, 992 993 /* Beacon filter commands */ 994 WMI_ADD_BCN_FILTER_CMDID = WMI_CMD_GRP(WMI_GRP_BCN_FILTER), 995 WMI_RMV_BCN_FILTER_CMDID, 996 997 /* WOW Specific WMI commands*/ 998 WMI_WOW_ADD_WAKE_PATTERN_CMDID = WMI_CMD_GRP(WMI_GRP_WOW), 999 WMI_WOW_DEL_WAKE_PATTERN_CMDID, 1000 WMI_WOW_ENABLE_DISABLE_WAKE_EVENT_CMDID, 1001 WMI_WOW_ENABLE_CMDID, 1002 WMI_WOW_HOSTWAKEUP_FROM_SLEEP_CMDID, 1003 1004 /* RTT measurement related cmd */ 1005 WMI_RTT_MEASREQ_CMDID = WMI_CMD_GRP(WMI_GRP_RTT), 1006 WMI_RTT_TSF_CMDID, 1007 1008 /* spectral scan commands */ 1009 WMI_VDEV_SPECTRAL_SCAN_CONFIGURE_CMDID = WMI_CMD_GRP(WMI_GRP_SPECTRAL), 1010 WMI_VDEV_SPECTRAL_SCAN_ENABLE_CMDID, 1011 1012 /* F/W stats */ 1013 WMI_REQUEST_STATS_CMDID = WMI_CMD_GRP(WMI_GRP_STATS), 1014 1015 /* ARP OFFLOAD REQUEST*/ 1016 WMI_SET_ARP_NS_OFFLOAD_CMDID = WMI_CMD_GRP(WMI_GRP_ARP_NS_OFL), 1017 1018 /* NS offload confid*/ 1019 WMI_NETWORK_LIST_OFFLOAD_CONFIG_CMDID = WMI_CMD_GRP(WMI_GRP_NLO_OFL), 1020 1021 /* GTK offload Specific WMI commands*/ 1022 WMI_GTK_OFFLOAD_CMDID = WMI_CMD_GRP(WMI_GRP_GTK_OFL), 1023 1024 /* CSA offload Specific WMI commands*/ 1025 WMI_CSA_OFFLOAD_ENABLE_CMDID = WMI_CMD_GRP(WMI_GRP_CSA_OFL), 1026 WMI_CSA_OFFLOAD_CHANSWITCH_CMDID, 1027 1028 /* Chatter commands*/ 1029 WMI_CHATTER_SET_MODE_CMDID = WMI_CMD_GRP(WMI_GRP_CHATTER), 1030 1031 /* addba specific commands */ 1032 WMI_PEER_TID_ADDBA_CMDID = WMI_CMD_GRP(WMI_GRP_TID_ADDBA), 1033 WMI_PEER_TID_DELBA_CMDID, 1034 1035 /* set station mimo powersave method */ 1036 WMI_STA_DTIM_PS_METHOD_CMDID, 1037 /* Configure the Station UAPSD AC Auto Trigger Parameters */ 1038 WMI_STA_UAPSD_AUTO_TRIG_CMDID, 1039 1040 /* STA Keep alive parameter configuration, 1041 * Requires WMI_SERVICE_STA_KEEP_ALIVE 1042 */ 1043 WMI_STA_KEEPALIVE_CMD, 1044 1045 /* misc command group */ 1046 WMI_ECHO_CMDID = WMI_CMD_GRP(WMI_GRP_MISC), 1047 WMI_PDEV_UTF_CMDID, 1048 WMI_DBGLOG_CFG_CMDID, 1049 WMI_PDEV_QVIT_CMDID, 1050 WMI_PDEV_FTM_INTG_CMDID, 1051 WMI_VDEV_SET_KEEPALIVE_CMDID, 1052 WMI_VDEV_GET_KEEPALIVE_CMDID, 1053 WMI_FORCE_FW_HANG_CMDID, 1054 1055 /* GPIO Configuration */ 1056 WMI_GPIO_CONFIG_CMDID = WMI_CMD_GRP(WMI_GRP_GPIO), 1057 WMI_GPIO_OUTPUT_CMDID, 1058 }; 1059 1060 enum wmi_event_id { 1061 WMI_SERVICE_READY_EVENTID = 0x1, 1062 WMI_READY_EVENTID, 1063 1064 /* Scan specific events */ 1065 WMI_SCAN_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_SCAN), 1066 1067 /* PDEV specific events */ 1068 WMI_PDEV_TPC_CONFIG_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_PDEV), 1069 WMI_CHAN_INFO_EVENTID, 1070 WMI_PHYERR_EVENTID, 1071 1072 /* VDEV specific events */ 1073 WMI_VDEV_START_RESP_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_VDEV), 1074 WMI_VDEV_STOPPED_EVENTID, 1075 WMI_VDEV_INSTALL_KEY_COMPLETE_EVENTID, 1076 1077 /* peer specific events */ 1078 WMI_PEER_STA_KICKOUT_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_PEER), 1079 1080 /* beacon/mgmt specific events */ 1081 WMI_MGMT_RX_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_MGMT), 1082 WMI_HOST_SWBA_EVENTID, 1083 WMI_TBTTOFFSET_UPDATE_EVENTID, 1084 1085 /* ADDBA Related WMI Events*/ 1086 WMI_TX_DELBA_COMPLETE_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_BA_NEG), 1087 WMI_TX_ADDBA_COMPLETE_EVENTID, 1088 1089 /* Roam event to trigger roaming on host */ 1090 WMI_ROAM_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_ROAM), 1091 WMI_PROFILE_MATCH, 1092 1093 /* WoW */ 1094 WMI_WOW_WAKEUP_HOST_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_WOW), 1095 1096 /* RTT */ 1097 WMI_RTT_MEASUREMENT_REPORT_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_RTT), 1098 WMI_TSF_MEASUREMENT_REPORT_EVENTID, 1099 WMI_RTT_ERROR_REPORT_EVENTID, 1100 1101 /* GTK offload */ 1102 WMI_GTK_OFFLOAD_STATUS_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_GTK_OFL), 1103 WMI_GTK_REKEY_FAIL_EVENTID, 1104 1105 /* CSA IE received event */ 1106 WMI_CSA_HANDLING_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_CSA_OFL), 1107 1108 /* Misc events */ 1109 WMI_ECHO_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_MISC), 1110 WMI_PDEV_UTF_EVENTID, 1111 WMI_DEBUG_MESG_EVENTID, 1112 WMI_UPDATE_STATS_EVENTID, 1113 WMI_DEBUG_PRINT_EVENTID, 1114 WMI_DCS_INTERFERENCE_EVENTID, 1115 WMI_PDEV_QVIT_EVENTID, 1116 WMI_WLAN_PROFILE_DATA_EVENTID, 1117 WMI_PDEV_FTM_INTG_EVENTID, 1118 WMI_WLAN_FREQ_AVOID_EVENTID, 1119 WMI_VDEV_GET_KEEPALIVE_EVENTID, 1120 1121 /* GPIO Event */ 1122 WMI_GPIO_INPUT_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_GPIO), 1123 }; 1124 1125 /* Command IDs and command events for 10.X firmware */ 1126 enum wmi_10x_cmd_id { 1127 WMI_10X_START_CMDID = 0x9000, 1128 WMI_10X_END_CMDID = 0x9FFF, 1129 1130 /* initialize the wlan sub system */ 1131 WMI_10X_INIT_CMDID, 1132 1133 /* Scan specific commands */ 1134 1135 WMI_10X_START_SCAN_CMDID = WMI_10X_START_CMDID, 1136 WMI_10X_STOP_SCAN_CMDID, 1137 WMI_10X_SCAN_CHAN_LIST_CMDID, 1138 WMI_10X_ECHO_CMDID, 1139 1140 /* PDEV(physical device) specific commands */ 1141 WMI_10X_PDEV_SET_REGDOMAIN_CMDID, 1142 WMI_10X_PDEV_SET_CHANNEL_CMDID, 1143 WMI_10X_PDEV_SET_PARAM_CMDID, 1144 WMI_10X_PDEV_PKTLOG_ENABLE_CMDID, 1145 WMI_10X_PDEV_PKTLOG_DISABLE_CMDID, 1146 WMI_10X_PDEV_SET_WMM_PARAMS_CMDID, 1147 WMI_10X_PDEV_SET_HT_CAP_IE_CMDID, 1148 WMI_10X_PDEV_SET_VHT_CAP_IE_CMDID, 1149 WMI_10X_PDEV_SET_BASE_MACADDR_CMDID, 1150 WMI_10X_PDEV_SET_DSCP_TID_MAP_CMDID, 1151 WMI_10X_PDEV_SET_QUIET_MODE_CMDID, 1152 WMI_10X_PDEV_GREEN_AP_PS_ENABLE_CMDID, 1153 WMI_10X_PDEV_GET_TPC_CONFIG_CMDID, 1154 1155 /* VDEV(virtual device) specific commands */ 1156 WMI_10X_VDEV_CREATE_CMDID, 1157 WMI_10X_VDEV_DELETE_CMDID, 1158 WMI_10X_VDEV_START_REQUEST_CMDID, 1159 WMI_10X_VDEV_RESTART_REQUEST_CMDID, 1160 WMI_10X_VDEV_UP_CMDID, 1161 WMI_10X_VDEV_STOP_CMDID, 1162 WMI_10X_VDEV_DOWN_CMDID, 1163 WMI_10X_VDEV_STANDBY_RESPONSE_CMDID, 1164 WMI_10X_VDEV_RESUME_RESPONSE_CMDID, 1165 WMI_10X_VDEV_SET_PARAM_CMDID, 1166 WMI_10X_VDEV_INSTALL_KEY_CMDID, 1167 1168 /* peer specific commands */ 1169 WMI_10X_PEER_CREATE_CMDID, 1170 WMI_10X_PEER_DELETE_CMDID, 1171 WMI_10X_PEER_FLUSH_TIDS_CMDID, 1172 WMI_10X_PEER_SET_PARAM_CMDID, 1173 WMI_10X_PEER_ASSOC_CMDID, 1174 WMI_10X_PEER_ADD_WDS_ENTRY_CMDID, 1175 WMI_10X_PEER_REMOVE_WDS_ENTRY_CMDID, 1176 WMI_10X_PEER_MCAST_GROUP_CMDID, 1177 1178 /* beacon/management specific commands */ 1179 1180 WMI_10X_BCN_TX_CMDID, 1181 WMI_10X_BCN_PRB_TMPL_CMDID, 1182 WMI_10X_BCN_FILTER_RX_CMDID, 1183 WMI_10X_PRB_REQ_FILTER_RX_CMDID, 1184 WMI_10X_MGMT_TX_CMDID, 1185 1186 /* commands to directly control ba negotiation directly from host. */ 1187 WMI_10X_ADDBA_CLEAR_RESP_CMDID, 1188 WMI_10X_ADDBA_SEND_CMDID, 1189 WMI_10X_ADDBA_STATUS_CMDID, 1190 WMI_10X_DELBA_SEND_CMDID, 1191 WMI_10X_ADDBA_SET_RESP_CMDID, 1192 WMI_10X_SEND_SINGLEAMSDU_CMDID, 1193 1194 /* Station power save specific config */ 1195 WMI_10X_STA_POWERSAVE_MODE_CMDID, 1196 WMI_10X_STA_POWERSAVE_PARAM_CMDID, 1197 WMI_10X_STA_MIMO_PS_MODE_CMDID, 1198 1199 /* set debug log config */ 1200 WMI_10X_DBGLOG_CFG_CMDID, 1201 1202 /* DFS-specific commands */ 1203 WMI_10X_PDEV_DFS_ENABLE_CMDID, 1204 WMI_10X_PDEV_DFS_DISABLE_CMDID, 1205 1206 /* QVIT specific command id */ 1207 WMI_10X_PDEV_QVIT_CMDID, 1208 1209 /* Offload Scan and Roaming related commands */ 1210 WMI_10X_ROAM_SCAN_MODE, 1211 WMI_10X_ROAM_SCAN_RSSI_THRESHOLD, 1212 WMI_10X_ROAM_SCAN_PERIOD, 1213 WMI_10X_ROAM_SCAN_RSSI_CHANGE_THRESHOLD, 1214 WMI_10X_ROAM_AP_PROFILE, 1215 WMI_10X_OFL_SCAN_ADD_AP_PROFILE, 1216 WMI_10X_OFL_SCAN_REMOVE_AP_PROFILE, 1217 WMI_10X_OFL_SCAN_PERIOD, 1218 1219 /* P2P specific commands */ 1220 WMI_10X_P2P_DEV_SET_DEVICE_INFO, 1221 WMI_10X_P2P_DEV_SET_DISCOVERABILITY, 1222 WMI_10X_P2P_GO_SET_BEACON_IE, 1223 WMI_10X_P2P_GO_SET_PROBE_RESP_IE, 1224 1225 /* AP power save specific config */ 1226 WMI_10X_AP_PS_PEER_PARAM_CMDID, 1227 WMI_10X_AP_PS_PEER_UAPSD_COEX_CMDID, 1228 1229 /* Rate-control specific commands */ 1230 WMI_10X_PEER_RATE_RETRY_SCHED_CMDID, 1231 1232 /* WLAN Profiling commands. */ 1233 WMI_10X_WLAN_PROFILE_TRIGGER_CMDID, 1234 WMI_10X_WLAN_PROFILE_SET_HIST_INTVL_CMDID, 1235 WMI_10X_WLAN_PROFILE_GET_PROFILE_DATA_CMDID, 1236 WMI_10X_WLAN_PROFILE_ENABLE_PROFILE_ID_CMDID, 1237 WMI_10X_WLAN_PROFILE_LIST_PROFILE_ID_CMDID, 1238 1239 /* Suspend resume command Ids */ 1240 WMI_10X_PDEV_SUSPEND_CMDID, 1241 WMI_10X_PDEV_RESUME_CMDID, 1242 1243 /* Beacon filter commands */ 1244 WMI_10X_ADD_BCN_FILTER_CMDID, 1245 WMI_10X_RMV_BCN_FILTER_CMDID, 1246 1247 /* WOW Specific WMI commands*/ 1248 WMI_10X_WOW_ADD_WAKE_PATTERN_CMDID, 1249 WMI_10X_WOW_DEL_WAKE_PATTERN_CMDID, 1250 WMI_10X_WOW_ENABLE_DISABLE_WAKE_EVENT_CMDID, 1251 WMI_10X_WOW_ENABLE_CMDID, 1252 WMI_10X_WOW_HOSTWAKEUP_FROM_SLEEP_CMDID, 1253 1254 /* RTT measurement related cmd */ 1255 WMI_10X_RTT_MEASREQ_CMDID, 1256 WMI_10X_RTT_TSF_CMDID, 1257 1258 /* transmit beacon by value */ 1259 WMI_10X_PDEV_SEND_BCN_CMDID, 1260 1261 /* F/W stats */ 1262 WMI_10X_VDEV_SPECTRAL_SCAN_CONFIGURE_CMDID, 1263 WMI_10X_VDEV_SPECTRAL_SCAN_ENABLE_CMDID, 1264 WMI_10X_REQUEST_STATS_CMDID, 1265 1266 /* GPIO Configuration */ 1267 WMI_10X_GPIO_CONFIG_CMDID, 1268 WMI_10X_GPIO_OUTPUT_CMDID, 1269 1270 WMI_10X_PDEV_UTF_CMDID = WMI_10X_END_CMDID - 1, 1271 }; 1272 1273 enum wmi_10x_event_id { 1274 WMI_10X_SERVICE_READY_EVENTID = 0x8000, 1275 WMI_10X_READY_EVENTID, 1276 WMI_10X_START_EVENTID = 0x9000, 1277 WMI_10X_END_EVENTID = 0x9FFF, 1278 1279 /* Scan specific events */ 1280 WMI_10X_SCAN_EVENTID = WMI_10X_START_EVENTID, 1281 WMI_10X_ECHO_EVENTID, 1282 WMI_10X_DEBUG_MESG_EVENTID, 1283 WMI_10X_UPDATE_STATS_EVENTID, 1284 1285 /* Instantaneous RSSI event */ 1286 WMI_10X_INST_RSSI_STATS_EVENTID, 1287 1288 /* VDEV specific events */ 1289 WMI_10X_VDEV_START_RESP_EVENTID, 1290 WMI_10X_VDEV_STANDBY_REQ_EVENTID, 1291 WMI_10X_VDEV_RESUME_REQ_EVENTID, 1292 WMI_10X_VDEV_STOPPED_EVENTID, 1293 1294 /* peer specific events */ 1295 WMI_10X_PEER_STA_KICKOUT_EVENTID, 1296 1297 /* beacon/mgmt specific events */ 1298 WMI_10X_HOST_SWBA_EVENTID, 1299 WMI_10X_TBTTOFFSET_UPDATE_EVENTID, 1300 WMI_10X_MGMT_RX_EVENTID, 1301 1302 /* Channel stats event */ 1303 WMI_10X_CHAN_INFO_EVENTID, 1304 1305 /* PHY Error specific WMI event */ 1306 WMI_10X_PHYERR_EVENTID, 1307 1308 /* Roam event to trigger roaming on host */ 1309 WMI_10X_ROAM_EVENTID, 1310 1311 /* matching AP found from list of profiles */ 1312 WMI_10X_PROFILE_MATCH, 1313 1314 /* debug print message used for tracing FW code while debugging */ 1315 WMI_10X_DEBUG_PRINT_EVENTID, 1316 /* VI spoecific event */ 1317 WMI_10X_PDEV_QVIT_EVENTID, 1318 /* FW code profile data in response to profile request */ 1319 WMI_10X_WLAN_PROFILE_DATA_EVENTID, 1320 1321 /*RTT related event ID*/ 1322 WMI_10X_RTT_MEASUREMENT_REPORT_EVENTID, 1323 WMI_10X_TSF_MEASUREMENT_REPORT_EVENTID, 1324 WMI_10X_RTT_ERROR_REPORT_EVENTID, 1325 1326 WMI_10X_WOW_WAKEUP_HOST_EVENTID, 1327 WMI_10X_DCS_INTERFERENCE_EVENTID, 1328 1329 /* TPC config for the current operating channel */ 1330 WMI_10X_PDEV_TPC_CONFIG_EVENTID, 1331 1332 WMI_10X_GPIO_INPUT_EVENTID, 1333 WMI_10X_PDEV_UTF_EVENTID = WMI_10X_END_EVENTID - 1, 1334 }; 1335 1336 enum wmi_10_2_cmd_id { 1337 WMI_10_2_START_CMDID = 0x9000, 1338 WMI_10_2_END_CMDID = 0x9FFF, 1339 WMI_10_2_INIT_CMDID, 1340 WMI_10_2_START_SCAN_CMDID = WMI_10_2_START_CMDID, 1341 WMI_10_2_STOP_SCAN_CMDID, 1342 WMI_10_2_SCAN_CHAN_LIST_CMDID, 1343 WMI_10_2_ECHO_CMDID, 1344 WMI_10_2_PDEV_SET_REGDOMAIN_CMDID, 1345 WMI_10_2_PDEV_SET_CHANNEL_CMDID, 1346 WMI_10_2_PDEV_SET_PARAM_CMDID, 1347 WMI_10_2_PDEV_PKTLOG_ENABLE_CMDID, 1348 WMI_10_2_PDEV_PKTLOG_DISABLE_CMDID, 1349 WMI_10_2_PDEV_SET_WMM_PARAMS_CMDID, 1350 WMI_10_2_PDEV_SET_HT_CAP_IE_CMDID, 1351 WMI_10_2_PDEV_SET_VHT_CAP_IE_CMDID, 1352 WMI_10_2_PDEV_SET_BASE_MACADDR_CMDID, 1353 WMI_10_2_PDEV_SET_QUIET_MODE_CMDID, 1354 WMI_10_2_PDEV_GREEN_AP_PS_ENABLE_CMDID, 1355 WMI_10_2_PDEV_GET_TPC_CONFIG_CMDID, 1356 WMI_10_2_VDEV_CREATE_CMDID, 1357 WMI_10_2_VDEV_DELETE_CMDID, 1358 WMI_10_2_VDEV_START_REQUEST_CMDID, 1359 WMI_10_2_VDEV_RESTART_REQUEST_CMDID, 1360 WMI_10_2_VDEV_UP_CMDID, 1361 WMI_10_2_VDEV_STOP_CMDID, 1362 WMI_10_2_VDEV_DOWN_CMDID, 1363 WMI_10_2_VDEV_STANDBY_RESPONSE_CMDID, 1364 WMI_10_2_VDEV_RESUME_RESPONSE_CMDID, 1365 WMI_10_2_VDEV_SET_PARAM_CMDID, 1366 WMI_10_2_VDEV_INSTALL_KEY_CMDID, 1367 WMI_10_2_VDEV_SET_DSCP_TID_MAP_CMDID, 1368 WMI_10_2_PEER_CREATE_CMDID, 1369 WMI_10_2_PEER_DELETE_CMDID, 1370 WMI_10_2_PEER_FLUSH_TIDS_CMDID, 1371 WMI_10_2_PEER_SET_PARAM_CMDID, 1372 WMI_10_2_PEER_ASSOC_CMDID, 1373 WMI_10_2_PEER_ADD_WDS_ENTRY_CMDID, 1374 WMI_10_2_PEER_UPDATE_WDS_ENTRY_CMDID, 1375 WMI_10_2_PEER_REMOVE_WDS_ENTRY_CMDID, 1376 WMI_10_2_PEER_MCAST_GROUP_CMDID, 1377 WMI_10_2_BCN_TX_CMDID, 1378 WMI_10_2_BCN_PRB_TMPL_CMDID, 1379 WMI_10_2_BCN_FILTER_RX_CMDID, 1380 WMI_10_2_PRB_REQ_FILTER_RX_CMDID, 1381 WMI_10_2_MGMT_TX_CMDID, 1382 WMI_10_2_ADDBA_CLEAR_RESP_CMDID, 1383 WMI_10_2_ADDBA_SEND_CMDID, 1384 WMI_10_2_ADDBA_STATUS_CMDID, 1385 WMI_10_2_DELBA_SEND_CMDID, 1386 WMI_10_2_ADDBA_SET_RESP_CMDID, 1387 WMI_10_2_SEND_SINGLEAMSDU_CMDID, 1388 WMI_10_2_STA_POWERSAVE_MODE_CMDID, 1389 WMI_10_2_STA_POWERSAVE_PARAM_CMDID, 1390 WMI_10_2_STA_MIMO_PS_MODE_CMDID, 1391 WMI_10_2_DBGLOG_CFG_CMDID, 1392 WMI_10_2_PDEV_DFS_ENABLE_CMDID, 1393 WMI_10_2_PDEV_DFS_DISABLE_CMDID, 1394 WMI_10_2_PDEV_QVIT_CMDID, 1395 WMI_10_2_ROAM_SCAN_MODE, 1396 WMI_10_2_ROAM_SCAN_RSSI_THRESHOLD, 1397 WMI_10_2_ROAM_SCAN_PERIOD, 1398 WMI_10_2_ROAM_SCAN_RSSI_CHANGE_THRESHOLD, 1399 WMI_10_2_ROAM_AP_PROFILE, 1400 WMI_10_2_OFL_SCAN_ADD_AP_PROFILE, 1401 WMI_10_2_OFL_SCAN_REMOVE_AP_PROFILE, 1402 WMI_10_2_OFL_SCAN_PERIOD, 1403 WMI_10_2_P2P_DEV_SET_DEVICE_INFO, 1404 WMI_10_2_P2P_DEV_SET_DISCOVERABILITY, 1405 WMI_10_2_P2P_GO_SET_BEACON_IE, 1406 WMI_10_2_P2P_GO_SET_PROBE_RESP_IE, 1407 WMI_10_2_AP_PS_PEER_PARAM_CMDID, 1408 WMI_10_2_AP_PS_PEER_UAPSD_COEX_CMDID, 1409 WMI_10_2_PEER_RATE_RETRY_SCHED_CMDID, 1410 WMI_10_2_WLAN_PROFILE_TRIGGER_CMDID, 1411 WMI_10_2_WLAN_PROFILE_SET_HIST_INTVL_CMDID, 1412 WMI_10_2_WLAN_PROFILE_GET_PROFILE_DATA_CMDID, 1413 WMI_10_2_WLAN_PROFILE_ENABLE_PROFILE_ID_CMDID, 1414 WMI_10_2_WLAN_PROFILE_LIST_PROFILE_ID_CMDID, 1415 WMI_10_2_PDEV_SUSPEND_CMDID, 1416 WMI_10_2_PDEV_RESUME_CMDID, 1417 WMI_10_2_ADD_BCN_FILTER_CMDID, 1418 WMI_10_2_RMV_BCN_FILTER_CMDID, 1419 WMI_10_2_WOW_ADD_WAKE_PATTERN_CMDID, 1420 WMI_10_2_WOW_DEL_WAKE_PATTERN_CMDID, 1421 WMI_10_2_WOW_ENABLE_DISABLE_WAKE_EVENT_CMDID, 1422 WMI_10_2_WOW_ENABLE_CMDID, 1423 WMI_10_2_WOW_HOSTWAKEUP_FROM_SLEEP_CMDID, 1424 WMI_10_2_RTT_MEASREQ_CMDID, 1425 WMI_10_2_RTT_TSF_CMDID, 1426 WMI_10_2_RTT_KEEPALIVE_CMDID, 1427 WMI_10_2_PDEV_SEND_BCN_CMDID, 1428 WMI_10_2_VDEV_SPECTRAL_SCAN_CONFIGURE_CMDID, 1429 WMI_10_2_VDEV_SPECTRAL_SCAN_ENABLE_CMDID, 1430 WMI_10_2_REQUEST_STATS_CMDID, 1431 WMI_10_2_GPIO_CONFIG_CMDID, 1432 WMI_10_2_GPIO_OUTPUT_CMDID, 1433 WMI_10_2_VDEV_RATEMASK_CMDID, 1434 WMI_10_2_PDEV_SMART_ANT_ENABLE_CMDID, 1435 WMI_10_2_PDEV_SMART_ANT_SET_RX_ANTENNA_CMDID, 1436 WMI_10_2_PEER_SMART_ANT_SET_TX_ANTENNA_CMDID, 1437 WMI_10_2_PEER_SMART_ANT_SET_TRAIN_INFO_CMDID, 1438 WMI_10_2_PEER_SMART_ANT_SET_NODE_CONFIG_OPS_CMDID, 1439 WMI_10_2_FORCE_FW_HANG_CMDID, 1440 WMI_10_2_PDEV_SET_ANTENNA_SWITCH_TABLE_CMDID, 1441 WMI_10_2_PDEV_SET_CTL_TABLE_CMDID, 1442 WMI_10_2_PDEV_SET_MIMOGAIN_TABLE_CMDID, 1443 WMI_10_2_PDEV_RATEPWR_TABLE_CMDID, 1444 WMI_10_2_PDEV_RATEPWR_CHAINMSK_TABLE_CMDID, 1445 WMI_10_2_PDEV_GET_INFO, 1446 WMI_10_2_VDEV_GET_INFO, 1447 WMI_10_2_VDEV_ATF_REQUEST_CMDID, 1448 WMI_10_2_PEER_ATF_REQUEST_CMDID, 1449 WMI_10_2_PDEV_GET_TEMPERATURE_CMDID, 1450 WMI_10_2_MU_CAL_START_CMDID, 1451 WMI_10_2_SET_LTEU_CONFIG_CMDID, 1452 WMI_10_2_SET_CCA_PARAMS, 1453 WMI_10_2_PDEV_BSS_CHAN_INFO_REQUEST_CMDID, 1454 WMI_10_2_PDEV_UTF_CMDID = WMI_10_2_END_CMDID - 1, 1455 }; 1456 1457 enum wmi_10_2_event_id { 1458 WMI_10_2_SERVICE_READY_EVENTID = 0x8000, 1459 WMI_10_2_READY_EVENTID, 1460 WMI_10_2_DEBUG_MESG_EVENTID, 1461 WMI_10_2_START_EVENTID = 0x9000, 1462 WMI_10_2_END_EVENTID = 0x9FFF, 1463 WMI_10_2_SCAN_EVENTID = WMI_10_2_START_EVENTID, 1464 WMI_10_2_ECHO_EVENTID, 1465 WMI_10_2_UPDATE_STATS_EVENTID, 1466 WMI_10_2_INST_RSSI_STATS_EVENTID, 1467 WMI_10_2_VDEV_START_RESP_EVENTID, 1468 WMI_10_2_VDEV_STANDBY_REQ_EVENTID, 1469 WMI_10_2_VDEV_RESUME_REQ_EVENTID, 1470 WMI_10_2_VDEV_STOPPED_EVENTID, 1471 WMI_10_2_PEER_STA_KICKOUT_EVENTID, 1472 WMI_10_2_HOST_SWBA_EVENTID, 1473 WMI_10_2_TBTTOFFSET_UPDATE_EVENTID, 1474 WMI_10_2_MGMT_RX_EVENTID, 1475 WMI_10_2_CHAN_INFO_EVENTID, 1476 WMI_10_2_PHYERR_EVENTID, 1477 WMI_10_2_ROAM_EVENTID, 1478 WMI_10_2_PROFILE_MATCH, 1479 WMI_10_2_DEBUG_PRINT_EVENTID, 1480 WMI_10_2_PDEV_QVIT_EVENTID, 1481 WMI_10_2_WLAN_PROFILE_DATA_EVENTID, 1482 WMI_10_2_RTT_MEASUREMENT_REPORT_EVENTID, 1483 WMI_10_2_TSF_MEASUREMENT_REPORT_EVENTID, 1484 WMI_10_2_RTT_ERROR_REPORT_EVENTID, 1485 WMI_10_2_RTT_KEEPALIVE_EVENTID, 1486 WMI_10_2_WOW_WAKEUP_HOST_EVENTID, 1487 WMI_10_2_DCS_INTERFERENCE_EVENTID, 1488 WMI_10_2_PDEV_TPC_CONFIG_EVENTID, 1489 WMI_10_2_GPIO_INPUT_EVENTID, 1490 WMI_10_2_PEER_RATECODE_LIST_EVENTID, 1491 WMI_10_2_GENERIC_BUFFER_EVENTID, 1492 WMI_10_2_MCAST_BUF_RELEASE_EVENTID, 1493 WMI_10_2_MCAST_LIST_AGEOUT_EVENTID, 1494 WMI_10_2_WDS_PEER_EVENTID, 1495 WMI_10_2_PEER_STA_PS_STATECHG_EVENTID, 1496 WMI_10_2_PDEV_TEMPERATURE_EVENTID, 1497 WMI_10_2_MU_REPORT_EVENTID, 1498 WMI_10_2_PDEV_BSS_CHAN_INFO_EVENTID, 1499 WMI_10_2_PDEV_UTF_EVENTID = WMI_10_2_END_EVENTID - 1, 1500 }; 1501 1502 enum wmi_10_4_cmd_id { 1503 WMI_10_4_START_CMDID = 0x9000, 1504 WMI_10_4_END_CMDID = 0x9FFF, 1505 WMI_10_4_INIT_CMDID, 1506 WMI_10_4_START_SCAN_CMDID = WMI_10_4_START_CMDID, 1507 WMI_10_4_STOP_SCAN_CMDID, 1508 WMI_10_4_SCAN_CHAN_LIST_CMDID, 1509 WMI_10_4_SCAN_SCH_PRIO_TBL_CMDID, 1510 WMI_10_4_SCAN_UPDATE_REQUEST_CMDID, 1511 WMI_10_4_ECHO_CMDID, 1512 WMI_10_4_PDEV_SET_REGDOMAIN_CMDID, 1513 WMI_10_4_PDEV_SET_CHANNEL_CMDID, 1514 WMI_10_4_PDEV_SET_PARAM_CMDID, 1515 WMI_10_4_PDEV_PKTLOG_ENABLE_CMDID, 1516 WMI_10_4_PDEV_PKTLOG_DISABLE_CMDID, 1517 WMI_10_4_PDEV_SET_WMM_PARAMS_CMDID, 1518 WMI_10_4_PDEV_SET_HT_CAP_IE_CMDID, 1519 WMI_10_4_PDEV_SET_VHT_CAP_IE_CMDID, 1520 WMI_10_4_PDEV_SET_BASE_MACADDR_CMDID, 1521 WMI_10_4_PDEV_SET_DSCP_TID_MAP_CMDID, 1522 WMI_10_4_PDEV_SET_QUIET_MODE_CMDID, 1523 WMI_10_4_PDEV_GREEN_AP_PS_ENABLE_CMDID, 1524 WMI_10_4_PDEV_GET_TPC_CONFIG_CMDID, 1525 WMI_10_4_VDEV_CREATE_CMDID, 1526 WMI_10_4_VDEV_DELETE_CMDID, 1527 WMI_10_4_VDEV_START_REQUEST_CMDID, 1528 WMI_10_4_VDEV_RESTART_REQUEST_CMDID, 1529 WMI_10_4_VDEV_UP_CMDID, 1530 WMI_10_4_VDEV_STOP_CMDID, 1531 WMI_10_4_VDEV_DOWN_CMDID, 1532 WMI_10_4_VDEV_STANDBY_RESPONSE_CMDID, 1533 WMI_10_4_VDEV_RESUME_RESPONSE_CMDID, 1534 WMI_10_4_VDEV_SET_PARAM_CMDID, 1535 WMI_10_4_VDEV_INSTALL_KEY_CMDID, 1536 WMI_10_4_WLAN_PEER_CACHING_ADD_PEER_CMDID, 1537 WMI_10_4_WLAN_PEER_CACHING_EVICT_PEER_CMDID, 1538 WMI_10_4_WLAN_PEER_CACHING_RESTORE_PEER_CMDID, 1539 WMI_10_4_WLAN_PEER_CACHING_PRINT_ALL_PEERS_INFO_CMDID, 1540 WMI_10_4_PEER_CREATE_CMDID, 1541 WMI_10_4_PEER_DELETE_CMDID, 1542 WMI_10_4_PEER_FLUSH_TIDS_CMDID, 1543 WMI_10_4_PEER_SET_PARAM_CMDID, 1544 WMI_10_4_PEER_ASSOC_CMDID, 1545 WMI_10_4_PEER_ADD_WDS_ENTRY_CMDID, 1546 WMI_10_4_PEER_UPDATE_WDS_ENTRY_CMDID, 1547 WMI_10_4_PEER_REMOVE_WDS_ENTRY_CMDID, 1548 WMI_10_4_PEER_ADD_PROXY_STA_ENTRY_CMDID, 1549 WMI_10_4_PEER_MCAST_GROUP_CMDID, 1550 WMI_10_4_BCN_TX_CMDID, 1551 WMI_10_4_PDEV_SEND_BCN_CMDID, 1552 WMI_10_4_BCN_PRB_TMPL_CMDID, 1553 WMI_10_4_BCN_FILTER_RX_CMDID, 1554 WMI_10_4_PRB_REQ_FILTER_RX_CMDID, 1555 WMI_10_4_MGMT_TX_CMDID, 1556 WMI_10_4_PRB_TMPL_CMDID, 1557 WMI_10_4_ADDBA_CLEAR_RESP_CMDID, 1558 WMI_10_4_ADDBA_SEND_CMDID, 1559 WMI_10_4_ADDBA_STATUS_CMDID, 1560 WMI_10_4_DELBA_SEND_CMDID, 1561 WMI_10_4_ADDBA_SET_RESP_CMDID, 1562 WMI_10_4_SEND_SINGLEAMSDU_CMDID, 1563 WMI_10_4_STA_POWERSAVE_MODE_CMDID, 1564 WMI_10_4_STA_POWERSAVE_PARAM_CMDID, 1565 WMI_10_4_STA_MIMO_PS_MODE_CMDID, 1566 WMI_10_4_DBGLOG_CFG_CMDID, 1567 WMI_10_4_PDEV_DFS_ENABLE_CMDID, 1568 WMI_10_4_PDEV_DFS_DISABLE_CMDID, 1569 WMI_10_4_PDEV_QVIT_CMDID, 1570 WMI_10_4_ROAM_SCAN_MODE, 1571 WMI_10_4_ROAM_SCAN_RSSI_THRESHOLD, 1572 WMI_10_4_ROAM_SCAN_PERIOD, 1573 WMI_10_4_ROAM_SCAN_RSSI_CHANGE_THRESHOLD, 1574 WMI_10_4_ROAM_AP_PROFILE, 1575 WMI_10_4_OFL_SCAN_ADD_AP_PROFILE, 1576 WMI_10_4_OFL_SCAN_REMOVE_AP_PROFILE, 1577 WMI_10_4_OFL_SCAN_PERIOD, 1578 WMI_10_4_P2P_DEV_SET_DEVICE_INFO, 1579 WMI_10_4_P2P_DEV_SET_DISCOVERABILITY, 1580 WMI_10_4_P2P_GO_SET_BEACON_IE, 1581 WMI_10_4_P2P_GO_SET_PROBE_RESP_IE, 1582 WMI_10_4_P2P_SET_VENDOR_IE_DATA_CMDID, 1583 WMI_10_4_AP_PS_PEER_PARAM_CMDID, 1584 WMI_10_4_AP_PS_PEER_UAPSD_COEX_CMDID, 1585 WMI_10_4_PEER_RATE_RETRY_SCHED_CMDID, 1586 WMI_10_4_WLAN_PROFILE_TRIGGER_CMDID, 1587 WMI_10_4_WLAN_PROFILE_SET_HIST_INTVL_CMDID, 1588 WMI_10_4_WLAN_PROFILE_GET_PROFILE_DATA_CMDID, 1589 WMI_10_4_WLAN_PROFILE_ENABLE_PROFILE_ID_CMDID, 1590 WMI_10_4_WLAN_PROFILE_LIST_PROFILE_ID_CMDID, 1591 WMI_10_4_PDEV_SUSPEND_CMDID, 1592 WMI_10_4_PDEV_RESUME_CMDID, 1593 WMI_10_4_ADD_BCN_FILTER_CMDID, 1594 WMI_10_4_RMV_BCN_FILTER_CMDID, 1595 WMI_10_4_WOW_ADD_WAKE_PATTERN_CMDID, 1596 WMI_10_4_WOW_DEL_WAKE_PATTERN_CMDID, 1597 WMI_10_4_WOW_ENABLE_DISABLE_WAKE_EVENT_CMDID, 1598 WMI_10_4_WOW_ENABLE_CMDID, 1599 WMI_10_4_WOW_HOSTWAKEUP_FROM_SLEEP_CMDID, 1600 WMI_10_4_RTT_MEASREQ_CMDID, 1601 WMI_10_4_RTT_TSF_CMDID, 1602 WMI_10_4_RTT_KEEPALIVE_CMDID, 1603 WMI_10_4_OEM_REQ_CMDID, 1604 WMI_10_4_NAN_CMDID, 1605 WMI_10_4_VDEV_SPECTRAL_SCAN_CONFIGURE_CMDID, 1606 WMI_10_4_VDEV_SPECTRAL_SCAN_ENABLE_CMDID, 1607 WMI_10_4_REQUEST_STATS_CMDID, 1608 WMI_10_4_GPIO_CONFIG_CMDID, 1609 WMI_10_4_GPIO_OUTPUT_CMDID, 1610 WMI_10_4_VDEV_RATEMASK_CMDID, 1611 WMI_10_4_CSA_OFFLOAD_ENABLE_CMDID, 1612 WMI_10_4_GTK_OFFLOAD_CMDID, 1613 WMI_10_4_QBOOST_CFG_CMDID, 1614 WMI_10_4_CSA_OFFLOAD_CHANSWITCH_CMDID, 1615 WMI_10_4_PDEV_SMART_ANT_ENABLE_CMDID, 1616 WMI_10_4_PDEV_SMART_ANT_SET_RX_ANTENNA_CMDID, 1617 WMI_10_4_PEER_SMART_ANT_SET_TX_ANTENNA_CMDID, 1618 WMI_10_4_PEER_SMART_ANT_SET_TRAIN_INFO_CMDID, 1619 WMI_10_4_PEER_SMART_ANT_SET_NODE_CONFIG_OPS_CMDID, 1620 WMI_10_4_VDEV_SET_KEEPALIVE_CMDID, 1621 WMI_10_4_VDEV_GET_KEEPALIVE_CMDID, 1622 WMI_10_4_FORCE_FW_HANG_CMDID, 1623 WMI_10_4_PDEV_SET_ANTENNA_SWITCH_TABLE_CMDID, 1624 WMI_10_4_PDEV_SET_CTL_TABLE_CMDID, 1625 WMI_10_4_PDEV_SET_MIMOGAIN_TABLE_CMDID, 1626 WMI_10_4_PDEV_RATEPWR_TABLE_CMDID, 1627 WMI_10_4_PDEV_RATEPWR_CHAINMSK_TABLE_CMDID, 1628 WMI_10_4_PDEV_FIPS_CMDID, 1629 WMI_10_4_TT_SET_CONF_CMDID, 1630 WMI_10_4_FWTEST_CMDID, 1631 WMI_10_4_VDEV_ATF_REQUEST_CMDID, 1632 WMI_10_4_PEER_ATF_REQUEST_CMDID, 1633 WMI_10_4_PDEV_GET_ANI_CCK_CONFIG_CMDID, 1634 WMI_10_4_PDEV_GET_ANI_OFDM_CONFIG_CMDID, 1635 WMI_10_4_PDEV_RESERVE_AST_ENTRY_CMDID, 1636 WMI_10_4_PDEV_GET_NFCAL_POWER_CMDID, 1637 WMI_10_4_PDEV_GET_TPC_CMDID, 1638 WMI_10_4_PDEV_GET_AST_INFO_CMDID, 1639 WMI_10_4_VDEV_SET_DSCP_TID_MAP_CMDID, 1640 WMI_10_4_PDEV_GET_TEMPERATURE_CMDID, 1641 WMI_10_4_PDEV_GET_INFO_CMDID, 1642 WMI_10_4_VDEV_GET_INFO_CMDID, 1643 WMI_10_4_VDEV_FILTER_NEIGHBOR_RX_PACKETS_CMDID, 1644 WMI_10_4_MU_CAL_START_CMDID, 1645 WMI_10_4_SET_CCA_PARAMS_CMDID, 1646 WMI_10_4_PDEV_BSS_CHAN_INFO_REQUEST_CMDID, 1647 WMI_10_4_EXT_RESOURCE_CFG_CMDID, 1648 WMI_10_4_VDEV_SET_IE_CMDID, 1649 WMI_10_4_SET_LTEU_CONFIG_CMDID, 1650 WMI_10_4_PDEV_UTF_CMDID = WMI_10_4_END_CMDID - 1, 1651 }; 1652 1653 enum wmi_10_4_event_id { 1654 WMI_10_4_SERVICE_READY_EVENTID = 0x8000, 1655 WMI_10_4_READY_EVENTID, 1656 WMI_10_4_DEBUG_MESG_EVENTID, 1657 WMI_10_4_START_EVENTID = 0x9000, 1658 WMI_10_4_END_EVENTID = 0x9FFF, 1659 WMI_10_4_SCAN_EVENTID = WMI_10_4_START_EVENTID, 1660 WMI_10_4_ECHO_EVENTID, 1661 WMI_10_4_UPDATE_STATS_EVENTID, 1662 WMI_10_4_INST_RSSI_STATS_EVENTID, 1663 WMI_10_4_VDEV_START_RESP_EVENTID, 1664 WMI_10_4_VDEV_STANDBY_REQ_EVENTID, 1665 WMI_10_4_VDEV_RESUME_REQ_EVENTID, 1666 WMI_10_4_VDEV_STOPPED_EVENTID, 1667 WMI_10_4_PEER_STA_KICKOUT_EVENTID, 1668 WMI_10_4_HOST_SWBA_EVENTID, 1669 WMI_10_4_TBTTOFFSET_UPDATE_EVENTID, 1670 WMI_10_4_MGMT_RX_EVENTID, 1671 WMI_10_4_CHAN_INFO_EVENTID, 1672 WMI_10_4_PHYERR_EVENTID, 1673 WMI_10_4_ROAM_EVENTID, 1674 WMI_10_4_PROFILE_MATCH, 1675 WMI_10_4_DEBUG_PRINT_EVENTID, 1676 WMI_10_4_PDEV_QVIT_EVENTID, 1677 WMI_10_4_WLAN_PROFILE_DATA_EVENTID, 1678 WMI_10_4_RTT_MEASUREMENT_REPORT_EVENTID, 1679 WMI_10_4_TSF_MEASUREMENT_REPORT_EVENTID, 1680 WMI_10_4_RTT_ERROR_REPORT_EVENTID, 1681 WMI_10_4_RTT_KEEPALIVE_EVENTID, 1682 WMI_10_4_OEM_CAPABILITY_EVENTID, 1683 WMI_10_4_OEM_MEASUREMENT_REPORT_EVENTID, 1684 WMI_10_4_OEM_ERROR_REPORT_EVENTID, 1685 WMI_10_4_NAN_EVENTID, 1686 WMI_10_4_WOW_WAKEUP_HOST_EVENTID, 1687 WMI_10_4_GTK_OFFLOAD_STATUS_EVENTID, 1688 WMI_10_4_GTK_REKEY_FAIL_EVENTID, 1689 WMI_10_4_DCS_INTERFERENCE_EVENTID, 1690 WMI_10_4_PDEV_TPC_CONFIG_EVENTID, 1691 WMI_10_4_CSA_HANDLING_EVENTID, 1692 WMI_10_4_GPIO_INPUT_EVENTID, 1693 WMI_10_4_PEER_RATECODE_LIST_EVENTID, 1694 WMI_10_4_GENERIC_BUFFER_EVENTID, 1695 WMI_10_4_MCAST_BUF_RELEASE_EVENTID, 1696 WMI_10_4_MCAST_LIST_AGEOUT_EVENTID, 1697 WMI_10_4_VDEV_GET_KEEPALIVE_EVENTID, 1698 WMI_10_4_WDS_PEER_EVENTID, 1699 WMI_10_4_PEER_STA_PS_STATECHG_EVENTID, 1700 WMI_10_4_PDEV_FIPS_EVENTID, 1701 WMI_10_4_TT_STATS_EVENTID, 1702 WMI_10_4_PDEV_CHANNEL_HOPPING_EVENTID, 1703 WMI_10_4_PDEV_ANI_CCK_LEVEL_EVENTID, 1704 WMI_10_4_PDEV_ANI_OFDM_LEVEL_EVENTID, 1705 WMI_10_4_PDEV_RESERVE_AST_ENTRY_EVENTID, 1706 WMI_10_4_PDEV_NFCAL_POWER_EVENTID, 1707 WMI_10_4_PDEV_TPC_EVENTID, 1708 WMI_10_4_PDEV_GET_AST_INFO_EVENTID, 1709 WMI_10_4_PDEV_TEMPERATURE_EVENTID, 1710 WMI_10_4_PDEV_NFCAL_POWER_ALL_CHANNELS_EVENTID, 1711 WMI_10_4_PDEV_BSS_CHAN_INFO_EVENTID, 1712 WMI_10_4_MU_REPORT_EVENTID, 1713 WMI_10_4_PDEV_UTF_EVENTID = WMI_10_4_END_EVENTID - 1, 1714 }; 1715 1716 enum wmi_phy_mode { 1717 MODE_11A = 0, /* 11a Mode */ 1718 MODE_11G = 1, /* 11b/g Mode */ 1719 MODE_11B = 2, /* 11b Mode */ 1720 MODE_11GONLY = 3, /* 11g only Mode */ 1721 MODE_11NA_HT20 = 4, /* 11a HT20 mode */ 1722 MODE_11NG_HT20 = 5, /* 11g HT20 mode */ 1723 MODE_11NA_HT40 = 6, /* 11a HT40 mode */ 1724 MODE_11NG_HT40 = 7, /* 11g HT40 mode */ 1725 MODE_11AC_VHT20 = 8, 1726 MODE_11AC_VHT40 = 9, 1727 MODE_11AC_VHT80 = 10, 1728 /* MODE_11AC_VHT160 = 11, */ 1729 MODE_11AC_VHT20_2G = 11, 1730 MODE_11AC_VHT40_2G = 12, 1731 MODE_11AC_VHT80_2G = 13, 1732 MODE_11AC_VHT80_80 = 14, 1733 MODE_11AC_VHT160 = 15, 1734 MODE_UNKNOWN = 16, 1735 MODE_MAX = 16 1736 }; 1737 1738 static inline const char *ath10k_wmi_phymode_str(enum wmi_phy_mode mode) 1739 { 1740 switch (mode) { 1741 case MODE_11A: 1742 return "11a"; 1743 case MODE_11G: 1744 return "11g"; 1745 case MODE_11B: 1746 return "11b"; 1747 case MODE_11GONLY: 1748 return "11gonly"; 1749 case MODE_11NA_HT20: 1750 return "11na-ht20"; 1751 case MODE_11NG_HT20: 1752 return "11ng-ht20"; 1753 case MODE_11NA_HT40: 1754 return "11na-ht40"; 1755 case MODE_11NG_HT40: 1756 return "11ng-ht40"; 1757 case MODE_11AC_VHT20: 1758 return "11ac-vht20"; 1759 case MODE_11AC_VHT40: 1760 return "11ac-vht40"; 1761 case MODE_11AC_VHT80: 1762 return "11ac-vht80"; 1763 case MODE_11AC_VHT160: 1764 return "11ac-vht160"; 1765 case MODE_11AC_VHT80_80: 1766 return "11ac-vht80+80"; 1767 case MODE_11AC_VHT20_2G: 1768 return "11ac-vht20-2g"; 1769 case MODE_11AC_VHT40_2G: 1770 return "11ac-vht40-2g"; 1771 case MODE_11AC_VHT80_2G: 1772 return "11ac-vht80-2g"; 1773 case MODE_UNKNOWN: 1774 /* skip */ 1775 break; 1776 1777 /* no default handler to allow compiler to check that the 1778 * enum is fully handled 1779 */ 1780 }; 1781 1782 return "<unknown>"; 1783 } 1784 1785 #define WMI_CHAN_LIST_TAG 0x1 1786 #define WMI_SSID_LIST_TAG 0x2 1787 #define WMI_BSSID_LIST_TAG 0x3 1788 #define WMI_IE_TAG 0x4 1789 1790 struct wmi_channel { 1791 __le32 mhz; 1792 __le32 band_center_freq1; 1793 __le32 band_center_freq2; /* valid for 11ac, 80plus80 */ 1794 union { 1795 __le32 flags; /* WMI_CHAN_FLAG_ */ 1796 struct { 1797 u8 mode; /* only 6 LSBs */ 1798 } __packed; 1799 } __packed; 1800 union { 1801 __le32 reginfo0; 1802 struct { 1803 /* note: power unit is 0.5 dBm */ 1804 u8 min_power; 1805 u8 max_power; 1806 u8 reg_power; 1807 u8 reg_classid; 1808 } __packed; 1809 } __packed; 1810 union { 1811 __le32 reginfo1; 1812 struct { 1813 u8 antenna_max; 1814 u8 max_tx_power; 1815 } __packed; 1816 } __packed; 1817 } __packed; 1818 1819 struct wmi_channel_arg { 1820 u32 freq; 1821 u32 band_center_freq1; 1822 u32 band_center_freq2; 1823 bool passive; 1824 bool allow_ibss; 1825 bool allow_ht; 1826 bool allow_vht; 1827 bool ht40plus; 1828 bool chan_radar; 1829 /* note: power unit is 0.5 dBm */ 1830 u32 min_power; 1831 u32 max_power; 1832 u32 max_reg_power; 1833 u32 max_antenna_gain; 1834 u32 reg_class_id; 1835 enum wmi_phy_mode mode; 1836 }; 1837 1838 enum wmi_channel_change_cause { 1839 WMI_CHANNEL_CHANGE_CAUSE_NONE = 0, 1840 WMI_CHANNEL_CHANGE_CAUSE_CSA, 1841 }; 1842 1843 #define WMI_CHAN_FLAG_HT40_PLUS (1 << 6) 1844 #define WMI_CHAN_FLAG_PASSIVE (1 << 7) 1845 #define WMI_CHAN_FLAG_ADHOC_ALLOWED (1 << 8) 1846 #define WMI_CHAN_FLAG_AP_DISABLED (1 << 9) 1847 #define WMI_CHAN_FLAG_DFS (1 << 10) 1848 #define WMI_CHAN_FLAG_ALLOW_HT (1 << 11) 1849 #define WMI_CHAN_FLAG_ALLOW_VHT (1 << 12) 1850 1851 /* Indicate reason for channel switch */ 1852 #define WMI_CHANNEL_CHANGE_CAUSE_CSA (1 << 13) 1853 1854 #define WMI_MAX_SPATIAL_STREAM 3 /* default max ss */ 1855 1856 /* HT Capabilities*/ 1857 #define WMI_HT_CAP_ENABLED 0x0001 /* HT Enabled/ disabled */ 1858 #define WMI_HT_CAP_HT20_SGI 0x0002 /* Short Guard Interval with HT20 */ 1859 #define WMI_HT_CAP_DYNAMIC_SMPS 0x0004 /* Dynamic MIMO powersave */ 1860 #define WMI_HT_CAP_TX_STBC 0x0008 /* B3 TX STBC */ 1861 #define WMI_HT_CAP_TX_STBC_MASK_SHIFT 3 1862 #define WMI_HT_CAP_RX_STBC 0x0030 /* B4-B5 RX STBC */ 1863 #define WMI_HT_CAP_RX_STBC_MASK_SHIFT 4 1864 #define WMI_HT_CAP_LDPC 0x0040 /* LDPC supported */ 1865 #define WMI_HT_CAP_L_SIG_TXOP_PROT 0x0080 /* L-SIG TXOP Protection */ 1866 #define WMI_HT_CAP_MPDU_DENSITY 0x0700 /* MPDU Density */ 1867 #define WMI_HT_CAP_MPDU_DENSITY_MASK_SHIFT 8 1868 #define WMI_HT_CAP_HT40_SGI 0x0800 1869 1870 #define WMI_HT_CAP_DEFAULT_ALL (WMI_HT_CAP_ENABLED | \ 1871 WMI_HT_CAP_HT20_SGI | \ 1872 WMI_HT_CAP_HT40_SGI | \ 1873 WMI_HT_CAP_TX_STBC | \ 1874 WMI_HT_CAP_RX_STBC | \ 1875 WMI_HT_CAP_LDPC) 1876 1877 /* 1878 * WMI_VHT_CAP_* these maps to ieee 802.11ac vht capability information 1879 * field. The fields not defined here are not supported, or reserved. 1880 * Do not change these masks and if you have to add new one follow the 1881 * bitmask as specified by 802.11ac draft. 1882 */ 1883 1884 #define WMI_VHT_CAP_MAX_MPDU_LEN_MASK 0x00000003 1885 #define WMI_VHT_CAP_RX_LDPC 0x00000010 1886 #define WMI_VHT_CAP_SGI_80MHZ 0x00000020 1887 #define WMI_VHT_CAP_SGI_160MHZ 0x00000040 1888 #define WMI_VHT_CAP_TX_STBC 0x00000080 1889 #define WMI_VHT_CAP_RX_STBC_MASK 0x00000300 1890 #define WMI_VHT_CAP_RX_STBC_MASK_SHIFT 8 1891 #define WMI_VHT_CAP_SU_BFER 0x00000800 1892 #define WMI_VHT_CAP_SU_BFEE 0x00001000 1893 #define WMI_VHT_CAP_MAX_CS_ANT_MASK 0x0000E000 1894 #define WMI_VHT_CAP_MAX_CS_ANT_MASK_SHIFT 13 1895 #define WMI_VHT_CAP_MAX_SND_DIM_MASK 0x00070000 1896 #define WMI_VHT_CAP_MAX_SND_DIM_MASK_SHIFT 16 1897 #define WMI_VHT_CAP_MU_BFER 0x00080000 1898 #define WMI_VHT_CAP_MU_BFEE 0x00100000 1899 #define WMI_VHT_CAP_MAX_AMPDU_LEN_EXP 0x03800000 1900 #define WMI_VHT_CAP_MAX_AMPDU_LEN_EXP_SHIFT 23 1901 #define WMI_VHT_CAP_RX_FIXED_ANT 0x10000000 1902 #define WMI_VHT_CAP_TX_FIXED_ANT 0x20000000 1903 1904 /* The following also refer for max HT AMSDU */ 1905 #define WMI_VHT_CAP_MAX_MPDU_LEN_3839 0x00000000 1906 #define WMI_VHT_CAP_MAX_MPDU_LEN_7935 0x00000001 1907 #define WMI_VHT_CAP_MAX_MPDU_LEN_11454 0x00000002 1908 1909 #define WMI_VHT_CAP_DEFAULT_ALL (WMI_VHT_CAP_MAX_MPDU_LEN_11454 | \ 1910 WMI_VHT_CAP_RX_LDPC | \ 1911 WMI_VHT_CAP_SGI_80MHZ | \ 1912 WMI_VHT_CAP_TX_STBC | \ 1913 WMI_VHT_CAP_RX_STBC_MASK | \ 1914 WMI_VHT_CAP_MAX_AMPDU_LEN_EXP | \ 1915 WMI_VHT_CAP_RX_FIXED_ANT | \ 1916 WMI_VHT_CAP_TX_FIXED_ANT) 1917 1918 /* 1919 * Interested readers refer to Rx/Tx MCS Map definition as defined in 1920 * 802.11ac 1921 */ 1922 #define WMI_VHT_MAX_MCS_4_SS_MASK(r, ss) ((3 & (r)) << (((ss) - 1) << 1)) 1923 #define WMI_VHT_MAX_SUPP_RATE_MASK 0x1fff0000 1924 #define WMI_VHT_MAX_SUPP_RATE_MASK_SHIFT 16 1925 1926 enum { 1927 REGDMN_MODE_11A = 0x00001, /* 11a channels */ 1928 REGDMN_MODE_TURBO = 0x00002, /* 11a turbo-only channels */ 1929 REGDMN_MODE_11B = 0x00004, /* 11b channels */ 1930 REGDMN_MODE_PUREG = 0x00008, /* 11g channels (OFDM only) */ 1931 REGDMN_MODE_11G = 0x00008, /* XXX historical */ 1932 REGDMN_MODE_108G = 0x00020, /* 11a+Turbo channels */ 1933 REGDMN_MODE_108A = 0x00040, /* 11g+Turbo channels */ 1934 REGDMN_MODE_XR = 0x00100, /* XR channels */ 1935 REGDMN_MODE_11A_HALF_RATE = 0x00200, /* 11A half rate channels */ 1936 REGDMN_MODE_11A_QUARTER_RATE = 0x00400, /* 11A quarter rate channels */ 1937 REGDMN_MODE_11NG_HT20 = 0x00800, /* 11N-G HT20 channels */ 1938 REGDMN_MODE_11NA_HT20 = 0x01000, /* 11N-A HT20 channels */ 1939 REGDMN_MODE_11NG_HT40PLUS = 0x02000, /* 11N-G HT40 + channels */ 1940 REGDMN_MODE_11NG_HT40MINUS = 0x04000, /* 11N-G HT40 - channels */ 1941 REGDMN_MODE_11NA_HT40PLUS = 0x08000, /* 11N-A HT40 + channels */ 1942 REGDMN_MODE_11NA_HT40MINUS = 0x10000, /* 11N-A HT40 - channels */ 1943 REGDMN_MODE_11AC_VHT20 = 0x20000, /* 5Ghz, VHT20 */ 1944 REGDMN_MODE_11AC_VHT40PLUS = 0x40000, /* 5Ghz, VHT40 + channels */ 1945 REGDMN_MODE_11AC_VHT40MINUS = 0x80000, /* 5Ghz VHT40 - channels */ 1946 REGDMN_MODE_11AC_VHT80 = 0x100000, /* 5Ghz, VHT80 channels */ 1947 REGDMN_MODE_11AC_VHT160 = 0x200000, /* 5Ghz, VHT160 channels */ 1948 REGDMN_MODE_11AC_VHT80_80 = 0x400000, /* 5Ghz, VHT80+80 channels */ 1949 REGDMN_MODE_ALL = 0xffffffff 1950 }; 1951 1952 #define REGDMN_CAP1_CHAN_HALF_RATE 0x00000001 1953 #define REGDMN_CAP1_CHAN_QUARTER_RATE 0x00000002 1954 #define REGDMN_CAP1_CHAN_HAL49GHZ 0x00000004 1955 1956 /* regulatory capabilities */ 1957 #define REGDMN_EEPROM_EEREGCAP_EN_FCC_MIDBAND 0x0040 1958 #define REGDMN_EEPROM_EEREGCAP_EN_KK_U1_EVEN 0x0080 1959 #define REGDMN_EEPROM_EEREGCAP_EN_KK_U2 0x0100 1960 #define REGDMN_EEPROM_EEREGCAP_EN_KK_MIDBAND 0x0200 1961 #define REGDMN_EEPROM_EEREGCAP_EN_KK_U1_ODD 0x0400 1962 #define REGDMN_EEPROM_EEREGCAP_EN_KK_NEW_11A 0x0800 1963 1964 struct hal_reg_capabilities { 1965 /* regdomain value specified in EEPROM */ 1966 __le32 eeprom_rd; 1967 /*regdomain */ 1968 __le32 eeprom_rd_ext; 1969 /* CAP1 capabilities bit map. */ 1970 __le32 regcap1; 1971 /* REGDMN EEPROM CAP. */ 1972 __le32 regcap2; 1973 /* REGDMN MODE */ 1974 __le32 wireless_modes; 1975 __le32 low_2ghz_chan; 1976 __le32 high_2ghz_chan; 1977 __le32 low_5ghz_chan; 1978 __le32 high_5ghz_chan; 1979 } __packed; 1980 1981 enum wlan_mode_capability { 1982 WHAL_WLAN_11A_CAPABILITY = 0x1, 1983 WHAL_WLAN_11G_CAPABILITY = 0x2, 1984 WHAL_WLAN_11AG_CAPABILITY = 0x3, 1985 }; 1986 1987 /* structure used by FW for requesting host memory */ 1988 struct wlan_host_mem_req { 1989 /* ID of the request */ 1990 __le32 req_id; 1991 /* size of the of each unit */ 1992 __le32 unit_size; 1993 /* flags to indicate that 1994 * the number units is dependent 1995 * on number of resources(num vdevs num peers .. etc) 1996 */ 1997 __le32 num_unit_info; 1998 /* 1999 * actual number of units to allocate . if flags in the num_unit_info 2000 * indicate that number of units is tied to number of a particular 2001 * resource to allocate then num_units filed is set to 0 and host 2002 * will derive the number units from number of the resources it is 2003 * requesting. 2004 */ 2005 __le32 num_units; 2006 } __packed; 2007 2008 /* 2009 * The following struct holds optional payload for 2010 * wmi_service_ready_event,e.g., 11ac pass some of the 2011 * device capability to the host. 2012 */ 2013 struct wmi_service_ready_event { 2014 __le32 sw_version; 2015 __le32 sw_version_1; 2016 __le32 abi_version; 2017 /* WMI_PHY_CAPABILITY */ 2018 __le32 phy_capability; 2019 /* Maximum number of frag table entries that SW will populate less 1 */ 2020 __le32 max_frag_entry; 2021 __le32 wmi_service_bitmap[16]; 2022 __le32 num_rf_chains; 2023 /* 2024 * The following field is only valid for service type 2025 * WMI_SERVICE_11AC 2026 */ 2027 __le32 ht_cap_info; /* WMI HT Capability */ 2028 __le32 vht_cap_info; /* VHT capability info field of 802.11ac */ 2029 __le32 vht_supp_mcs; /* VHT Supported MCS Set field Rx/Tx same */ 2030 __le32 hw_min_tx_power; 2031 __le32 hw_max_tx_power; 2032 struct hal_reg_capabilities hal_reg_capabilities; 2033 __le32 sys_cap_info; 2034 __le32 min_pkt_size_enable; /* Enterprise mode short pkt enable */ 2035 /* 2036 * Max beacon and Probe Response IE offload size 2037 * (includes optional P2P IEs) 2038 */ 2039 __le32 max_bcn_ie_size; 2040 /* 2041 * request to host to allocate a chuck of memory and pss it down to FW 2042 * via WM_INIT. FW uses this as FW extesnsion memory for saving its 2043 * data structures. Only valid for low latency interfaces like PCIE 2044 * where FW can access this memory directly (or) by DMA. 2045 */ 2046 __le32 num_mem_reqs; 2047 struct wlan_host_mem_req mem_reqs[0]; 2048 } __packed; 2049 2050 /* This is the definition from 10.X firmware branch */ 2051 struct wmi_10x_service_ready_event { 2052 __le32 sw_version; 2053 __le32 abi_version; 2054 2055 /* WMI_PHY_CAPABILITY */ 2056 __le32 phy_capability; 2057 2058 /* Maximum number of frag table entries that SW will populate less 1 */ 2059 __le32 max_frag_entry; 2060 __le32 wmi_service_bitmap[16]; 2061 __le32 num_rf_chains; 2062 2063 /* 2064 * The following field is only valid for service type 2065 * WMI_SERVICE_11AC 2066 */ 2067 __le32 ht_cap_info; /* WMI HT Capability */ 2068 __le32 vht_cap_info; /* VHT capability info field of 802.11ac */ 2069 __le32 vht_supp_mcs; /* VHT Supported MCS Set field Rx/Tx same */ 2070 __le32 hw_min_tx_power; 2071 __le32 hw_max_tx_power; 2072 2073 struct hal_reg_capabilities hal_reg_capabilities; 2074 2075 __le32 sys_cap_info; 2076 __le32 min_pkt_size_enable; /* Enterprise mode short pkt enable */ 2077 2078 /* 2079 * request to host to allocate a chuck of memory and pss it down to FW 2080 * via WM_INIT. FW uses this as FW extesnsion memory for saving its 2081 * data structures. Only valid for low latency interfaces like PCIE 2082 * where FW can access this memory directly (or) by DMA. 2083 */ 2084 __le32 num_mem_reqs; 2085 2086 struct wlan_host_mem_req mem_reqs[0]; 2087 } __packed; 2088 2089 #define WMI_SERVICE_READY_TIMEOUT_HZ (5 * HZ) 2090 #define WMI_UNIFIED_READY_TIMEOUT_HZ (5 * HZ) 2091 2092 struct wmi_ready_event { 2093 __le32 sw_version; 2094 __le32 abi_version; 2095 struct wmi_mac_addr mac_addr; 2096 __le32 status; 2097 } __packed; 2098 2099 struct wmi_resource_config { 2100 /* number of virtual devices (VAPs) to support */ 2101 __le32 num_vdevs; 2102 2103 /* number of peer nodes to support */ 2104 __le32 num_peers; 2105 2106 /* 2107 * In offload mode target supports features like WOW, chatter and 2108 * other protocol offloads. In order to support them some 2109 * functionalities like reorder buffering, PN checking need to be 2110 * done in target. This determines maximum number of peers supported 2111 * by target in offload mode 2112 */ 2113 __le32 num_offload_peers; 2114 2115 /* For target-based RX reordering */ 2116 __le32 num_offload_reorder_bufs; 2117 2118 /* number of keys per peer */ 2119 __le32 num_peer_keys; 2120 2121 /* total number of TX/RX data TIDs */ 2122 __le32 num_tids; 2123 2124 /* 2125 * max skid for resolving hash collisions 2126 * 2127 * The address search table is sparse, so that if two MAC addresses 2128 * result in the same hash value, the second of these conflicting 2129 * entries can slide to the next index in the address search table, 2130 * and use it, if it is unoccupied. This ast_skid_limit parameter 2131 * specifies the upper bound on how many subsequent indices to search 2132 * over to find an unoccupied space. 2133 */ 2134 __le32 ast_skid_limit; 2135 2136 /* 2137 * the nominal chain mask for transmit 2138 * 2139 * The chain mask may be modified dynamically, e.g. to operate AP 2140 * tx with a reduced number of chains if no clients are associated. 2141 * This configuration parameter specifies the nominal chain-mask that 2142 * should be used when not operating with a reduced set of tx chains. 2143 */ 2144 __le32 tx_chain_mask; 2145 2146 /* 2147 * the nominal chain mask for receive 2148 * 2149 * The chain mask may be modified dynamically, e.g. for a client 2150 * to use a reduced number of chains for receive if the traffic to 2151 * the client is low enough that it doesn't require downlink MIMO 2152 * or antenna diversity. 2153 * This configuration parameter specifies the nominal chain-mask that 2154 * should be used when not operating with a reduced set of rx chains. 2155 */ 2156 __le32 rx_chain_mask; 2157 2158 /* 2159 * what rx reorder timeout (ms) to use for the AC 2160 * 2161 * Each WMM access class (voice, video, best-effort, background) will 2162 * have its own timeout value to dictate how long to wait for missing 2163 * rx MPDUs to arrive before flushing subsequent MPDUs that have 2164 * already been received. 2165 * This parameter specifies the timeout in milliseconds for each 2166 * class. 2167 */ 2168 __le32 rx_timeout_pri_vi; 2169 __le32 rx_timeout_pri_vo; 2170 __le32 rx_timeout_pri_be; 2171 __le32 rx_timeout_pri_bk; 2172 2173 /* 2174 * what mode the rx should decap packets to 2175 * 2176 * MAC can decap to RAW (no decap), native wifi or Ethernet types 2177 * THis setting also determines the default TX behavior, however TX 2178 * behavior can be modified on a per VAP basis during VAP init 2179 */ 2180 __le32 rx_decap_mode; 2181 2182 /* what is the maximum number of scan requests that can be queued */ 2183 __le32 scan_max_pending_reqs; 2184 2185 /* maximum VDEV that could use BMISS offload */ 2186 __le32 bmiss_offload_max_vdev; 2187 2188 /* maximum VDEV that could use offload roaming */ 2189 __le32 roam_offload_max_vdev; 2190 2191 /* maximum AP profiles that would push to offload roaming */ 2192 __le32 roam_offload_max_ap_profiles; 2193 2194 /* 2195 * how many groups to use for mcast->ucast conversion 2196 * 2197 * The target's WAL maintains a table to hold information regarding 2198 * which peers belong to a given multicast group, so that if 2199 * multicast->unicast conversion is enabled, the target can convert 2200 * multicast tx frames to a series of unicast tx frames, to each 2201 * peer within the multicast group. 2202 This num_mcast_groups configuration parameter tells the target how 2203 * many multicast groups to provide storage for within its multicast 2204 * group membership table. 2205 */ 2206 __le32 num_mcast_groups; 2207 2208 /* 2209 * size to alloc for the mcast membership table 2210 * 2211 * This num_mcast_table_elems configuration parameter tells the 2212 * target how many peer elements it needs to provide storage for in 2213 * its multicast group membership table. 2214 * These multicast group membership table elements are shared by the 2215 * multicast groups stored within the table. 2216 */ 2217 __le32 num_mcast_table_elems; 2218 2219 /* 2220 * whether/how to do multicast->unicast conversion 2221 * 2222 * This configuration parameter specifies whether the target should 2223 * perform multicast --> unicast conversion on transmit, and if so, 2224 * what to do if it finds no entries in its multicast group 2225 * membership table for the multicast IP address in the tx frame. 2226 * Configuration value: 2227 * 0 -> Do not perform multicast to unicast conversion. 2228 * 1 -> Convert multicast frames to unicast, if the IP multicast 2229 * address from the tx frame is found in the multicast group 2230 * membership table. If the IP multicast address is not found, 2231 * drop the frame. 2232 * 2 -> Convert multicast frames to unicast, if the IP multicast 2233 * address from the tx frame is found in the multicast group 2234 * membership table. If the IP multicast address is not found, 2235 * transmit the frame as multicast. 2236 */ 2237 __le32 mcast2ucast_mode; 2238 2239 /* 2240 * how much memory to allocate for a tx PPDU dbg log 2241 * 2242 * This parameter controls how much memory the target will allocate 2243 * to store a log of tx PPDU meta-information (how large the PPDU 2244 * was, when it was sent, whether it was successful, etc.) 2245 */ 2246 __le32 tx_dbg_log_size; 2247 2248 /* how many AST entries to be allocated for WDS */ 2249 __le32 num_wds_entries; 2250 2251 /* 2252 * MAC DMA burst size, e.g., For target PCI limit can be 2253 * 0 -default, 1 256B 2254 */ 2255 __le32 dma_burst_size; 2256 2257 /* 2258 * Fixed delimiters to be inserted after every MPDU to 2259 * account for interface latency to avoid underrun. 2260 */ 2261 __le32 mac_aggr_delim; 2262 2263 /* 2264 * determine whether target is responsible for detecting duplicate 2265 * non-aggregate MPDU and timing out stale fragments. 2266 * 2267 * A-MPDU reordering is always performed on the target. 2268 * 2269 * 0: target responsible for frag timeout and dup checking 2270 * 1: host responsible for frag timeout and dup checking 2271 */ 2272 __le32 rx_skip_defrag_timeout_dup_detection_check; 2273 2274 /* 2275 * Configuration for VoW : 2276 * No of Video Nodes to be supported 2277 * and Max no of descriptors for each Video link (node). 2278 */ 2279 __le32 vow_config; 2280 2281 /* maximum VDEV that could use GTK offload */ 2282 __le32 gtk_offload_max_vdev; 2283 2284 /* Number of msdu descriptors target should use */ 2285 __le32 num_msdu_desc; 2286 2287 /* 2288 * Max. number of Tx fragments per MSDU 2289 * This parameter controls the max number of Tx fragments per MSDU. 2290 * This is sent by the target as part of the WMI_SERVICE_READY event 2291 * and is overridden by the OS shim as required. 2292 */ 2293 __le32 max_frag_entries; 2294 } __packed; 2295 2296 struct wmi_resource_config_10x { 2297 /* number of virtual devices (VAPs) to support */ 2298 __le32 num_vdevs; 2299 2300 /* number of peer nodes to support */ 2301 __le32 num_peers; 2302 2303 /* number of keys per peer */ 2304 __le32 num_peer_keys; 2305 2306 /* total number of TX/RX data TIDs */ 2307 __le32 num_tids; 2308 2309 /* 2310 * max skid for resolving hash collisions 2311 * 2312 * The address search table is sparse, so that if two MAC addresses 2313 * result in the same hash value, the second of these conflicting 2314 * entries can slide to the next index in the address search table, 2315 * and use it, if it is unoccupied. This ast_skid_limit parameter 2316 * specifies the upper bound on how many subsequent indices to search 2317 * over to find an unoccupied space. 2318 */ 2319 __le32 ast_skid_limit; 2320 2321 /* 2322 * the nominal chain mask for transmit 2323 * 2324 * The chain mask may be modified dynamically, e.g. to operate AP 2325 * tx with a reduced number of chains if no clients are associated. 2326 * This configuration parameter specifies the nominal chain-mask that 2327 * should be used when not operating with a reduced set of tx chains. 2328 */ 2329 __le32 tx_chain_mask; 2330 2331 /* 2332 * the nominal chain mask for receive 2333 * 2334 * The chain mask may be modified dynamically, e.g. for a client 2335 * to use a reduced number of chains for receive if the traffic to 2336 * the client is low enough that it doesn't require downlink MIMO 2337 * or antenna diversity. 2338 * This configuration parameter specifies the nominal chain-mask that 2339 * should be used when not operating with a reduced set of rx chains. 2340 */ 2341 __le32 rx_chain_mask; 2342 2343 /* 2344 * what rx reorder timeout (ms) to use for the AC 2345 * 2346 * Each WMM access class (voice, video, best-effort, background) will 2347 * have its own timeout value to dictate how long to wait for missing 2348 * rx MPDUs to arrive before flushing subsequent MPDUs that have 2349 * already been received. 2350 * This parameter specifies the timeout in milliseconds for each 2351 * class. 2352 */ 2353 __le32 rx_timeout_pri_vi; 2354 __le32 rx_timeout_pri_vo; 2355 __le32 rx_timeout_pri_be; 2356 __le32 rx_timeout_pri_bk; 2357 2358 /* 2359 * what mode the rx should decap packets to 2360 * 2361 * MAC can decap to RAW (no decap), native wifi or Ethernet types 2362 * THis setting also determines the default TX behavior, however TX 2363 * behavior can be modified on a per VAP basis during VAP init 2364 */ 2365 __le32 rx_decap_mode; 2366 2367 /* what is the maximum number of scan requests that can be queued */ 2368 __le32 scan_max_pending_reqs; 2369 2370 /* maximum VDEV that could use BMISS offload */ 2371 __le32 bmiss_offload_max_vdev; 2372 2373 /* maximum VDEV that could use offload roaming */ 2374 __le32 roam_offload_max_vdev; 2375 2376 /* maximum AP profiles that would push to offload roaming */ 2377 __le32 roam_offload_max_ap_profiles; 2378 2379 /* 2380 * how many groups to use for mcast->ucast conversion 2381 * 2382 * The target's WAL maintains a table to hold information regarding 2383 * which peers belong to a given multicast group, so that if 2384 * multicast->unicast conversion is enabled, the target can convert 2385 * multicast tx frames to a series of unicast tx frames, to each 2386 * peer within the multicast group. 2387 This num_mcast_groups configuration parameter tells the target how 2388 * many multicast groups to provide storage for within its multicast 2389 * group membership table. 2390 */ 2391 __le32 num_mcast_groups; 2392 2393 /* 2394 * size to alloc for the mcast membership table 2395 * 2396 * This num_mcast_table_elems configuration parameter tells the 2397 * target how many peer elements it needs to provide storage for in 2398 * its multicast group membership table. 2399 * These multicast group membership table elements are shared by the 2400 * multicast groups stored within the table. 2401 */ 2402 __le32 num_mcast_table_elems; 2403 2404 /* 2405 * whether/how to do multicast->unicast conversion 2406 * 2407 * This configuration parameter specifies whether the target should 2408 * perform multicast --> unicast conversion on transmit, and if so, 2409 * what to do if it finds no entries in its multicast group 2410 * membership table for the multicast IP address in the tx frame. 2411 * Configuration value: 2412 * 0 -> Do not perform multicast to unicast conversion. 2413 * 1 -> Convert multicast frames to unicast, if the IP multicast 2414 * address from the tx frame is found in the multicast group 2415 * membership table. If the IP multicast address is not found, 2416 * drop the frame. 2417 * 2 -> Convert multicast frames to unicast, if the IP multicast 2418 * address from the tx frame is found in the multicast group 2419 * membership table. If the IP multicast address is not found, 2420 * transmit the frame as multicast. 2421 */ 2422 __le32 mcast2ucast_mode; 2423 2424 /* 2425 * how much memory to allocate for a tx PPDU dbg log 2426 * 2427 * This parameter controls how much memory the target will allocate 2428 * to store a log of tx PPDU meta-information (how large the PPDU 2429 * was, when it was sent, whether it was successful, etc.) 2430 */ 2431 __le32 tx_dbg_log_size; 2432 2433 /* how many AST entries to be allocated for WDS */ 2434 __le32 num_wds_entries; 2435 2436 /* 2437 * MAC DMA burst size, e.g., For target PCI limit can be 2438 * 0 -default, 1 256B 2439 */ 2440 __le32 dma_burst_size; 2441 2442 /* 2443 * Fixed delimiters to be inserted after every MPDU to 2444 * account for interface latency to avoid underrun. 2445 */ 2446 __le32 mac_aggr_delim; 2447 2448 /* 2449 * determine whether target is responsible for detecting duplicate 2450 * non-aggregate MPDU and timing out stale fragments. 2451 * 2452 * A-MPDU reordering is always performed on the target. 2453 * 2454 * 0: target responsible for frag timeout and dup checking 2455 * 1: host responsible for frag timeout and dup checking 2456 */ 2457 __le32 rx_skip_defrag_timeout_dup_detection_check; 2458 2459 /* 2460 * Configuration for VoW : 2461 * No of Video Nodes to be supported 2462 * and Max no of descriptors for each Video link (node). 2463 */ 2464 __le32 vow_config; 2465 2466 /* Number of msdu descriptors target should use */ 2467 __le32 num_msdu_desc; 2468 2469 /* 2470 * Max. number of Tx fragments per MSDU 2471 * This parameter controls the max number of Tx fragments per MSDU. 2472 * This is sent by the target as part of the WMI_SERVICE_READY event 2473 * and is overridden by the OS shim as required. 2474 */ 2475 __le32 max_frag_entries; 2476 } __packed; 2477 2478 enum wmi_10_2_feature_mask { 2479 WMI_10_2_RX_BATCH_MODE = BIT(0), 2480 WMI_10_2_ATF_CONFIG = BIT(1), 2481 WMI_10_2_COEX_GPIO = BIT(3), 2482 WMI_10_2_BSS_CHAN_INFO = BIT(6), 2483 WMI_10_2_PEER_STATS = BIT(7), 2484 }; 2485 2486 struct wmi_resource_config_10_2 { 2487 struct wmi_resource_config_10x common; 2488 __le32 max_peer_ext_stats; 2489 __le32 smart_ant_cap; /* 0-disable, 1-enable */ 2490 __le32 bk_min_free; 2491 __le32 be_min_free; 2492 __le32 vi_min_free; 2493 __le32 vo_min_free; 2494 __le32 feature_mask; 2495 } __packed; 2496 2497 #define NUM_UNITS_IS_NUM_VDEVS BIT(0) 2498 #define NUM_UNITS_IS_NUM_PEERS BIT(1) 2499 #define NUM_UNITS_IS_NUM_ACTIVE_PEERS BIT(2) 2500 2501 struct wmi_resource_config_10_4 { 2502 /* Number of virtual devices (VAPs) to support */ 2503 __le32 num_vdevs; 2504 2505 /* Number of peer nodes to support */ 2506 __le32 num_peers; 2507 2508 /* Number of active peer nodes to support */ 2509 __le32 num_active_peers; 2510 2511 /* In offload mode, target supports features like WOW, chatter and other 2512 * protocol offloads. In order to support them some functionalities like 2513 * reorder buffering, PN checking need to be done in target. 2514 * This determines maximum number of peers supported by target in 2515 * offload mode. 2516 */ 2517 __le32 num_offload_peers; 2518 2519 /* Number of reorder buffers available for doing target based reorder 2520 * Rx reorder buffering 2521 */ 2522 __le32 num_offload_reorder_buffs; 2523 2524 /* Number of keys per peer */ 2525 __le32 num_peer_keys; 2526 2527 /* Total number of TX/RX data TIDs */ 2528 __le32 num_tids; 2529 2530 /* Max skid for resolving hash collisions. 2531 * The address search table is sparse, so that if two MAC addresses 2532 * result in the same hash value, the second of these conflicting 2533 * entries can slide to the next index in the address search table, 2534 * and use it, if it is unoccupied. This ast_skid_limit parameter 2535 * specifies the upper bound on how many subsequent indices to search 2536 * over to find an unoccupied space. 2537 */ 2538 __le32 ast_skid_limit; 2539 2540 /* The nominal chain mask for transmit. 2541 * The chain mask may be modified dynamically, e.g. to operate AP tx 2542 * with a reduced number of chains if no clients are associated. 2543 * This configuration parameter specifies the nominal chain-mask that 2544 * should be used when not operating with a reduced set of tx chains. 2545 */ 2546 __le32 tx_chain_mask; 2547 2548 /* The nominal chain mask for receive. 2549 * The chain mask may be modified dynamically, e.g. for a client to use 2550 * a reduced number of chains for receive if the traffic to the client 2551 * is low enough that it doesn't require downlink MIMO or antenna 2552 * diversity. This configuration parameter specifies the nominal 2553 * chain-mask that should be used when not operating with a reduced 2554 * set of rx chains. 2555 */ 2556 __le32 rx_chain_mask; 2557 2558 /* What rx reorder timeout (ms) to use for the AC. 2559 * Each WMM access class (voice, video, best-effort, background) will 2560 * have its own timeout value to dictate how long to wait for missing 2561 * rx MPDUs to arrive before flushing subsequent MPDUs that have already 2562 * been received. This parameter specifies the timeout in milliseconds 2563 * for each class. 2564 */ 2565 __le32 rx_timeout_pri[4]; 2566 2567 /* What mode the rx should decap packets to. 2568 * MAC can decap to RAW (no decap), native wifi or Ethernet types. 2569 * This setting also determines the default TX behavior, however TX 2570 * behavior can be modified on a per VAP basis during VAP init 2571 */ 2572 __le32 rx_decap_mode; 2573 2574 __le32 scan_max_pending_req; 2575 2576 __le32 bmiss_offload_max_vdev; 2577 2578 __le32 roam_offload_max_vdev; 2579 2580 __le32 roam_offload_max_ap_profiles; 2581 2582 /* How many groups to use for mcast->ucast conversion. 2583 * The target's WAL maintains a table to hold information regarding 2584 * which peers belong to a given multicast group, so that if 2585 * multicast->unicast conversion is enabled, the target can convert 2586 * multicast tx frames to a series of unicast tx frames, to each peer 2587 * within the multicast group. This num_mcast_groups configuration 2588 * parameter tells the target how many multicast groups to provide 2589 * storage for within its multicast group membership table. 2590 */ 2591 __le32 num_mcast_groups; 2592 2593 /* Size to alloc for the mcast membership table. 2594 * This num_mcast_table_elems configuration parameter tells the target 2595 * how many peer elements it needs to provide storage for in its 2596 * multicast group membership table. These multicast group membership 2597 * table elements are shared by the multicast groups stored within 2598 * the table. 2599 */ 2600 __le32 num_mcast_table_elems; 2601 2602 /* Whether/how to do multicast->unicast conversion. 2603 * This configuration parameter specifies whether the target should 2604 * perform multicast --> unicast conversion on transmit, and if so, 2605 * what to do if it finds no entries in its multicast group membership 2606 * table for the multicast IP address in the tx frame. 2607 * Configuration value: 2608 * 0 -> Do not perform multicast to unicast conversion. 2609 * 1 -> Convert multicast frames to unicast, if the IP multicast address 2610 * from the tx frame is found in the multicast group membership 2611 * table. If the IP multicast address is not found, drop the frame 2612 * 2 -> Convert multicast frames to unicast, if the IP multicast address 2613 * from the tx frame is found in the multicast group membership 2614 * table. If the IP multicast address is not found, transmit the 2615 * frame as multicast. 2616 */ 2617 __le32 mcast2ucast_mode; 2618 2619 /* How much memory to allocate for a tx PPDU dbg log. 2620 * This parameter controls how much memory the target will allocate to 2621 * store a log of tx PPDU meta-information (how large the PPDU was, 2622 * when it was sent, whether it was successful, etc.) 2623 */ 2624 __le32 tx_dbg_log_size; 2625 2626 /* How many AST entries to be allocated for WDS */ 2627 __le32 num_wds_entries; 2628 2629 /* MAC DMA burst size. 0 -default, 1 -256B */ 2630 __le32 dma_burst_size; 2631 2632 /* Fixed delimiters to be inserted after every MPDU to account for 2633 * interface latency to avoid underrun. 2634 */ 2635 __le32 mac_aggr_delim; 2636 2637 /* Determine whether target is responsible for detecting duplicate 2638 * non-aggregate MPDU and timing out stale fragments. A-MPDU reordering 2639 * is always performed on the target. 2640 * 2641 * 0: target responsible for frag timeout and dup checking 2642 * 1: host responsible for frag timeout and dup checking 2643 */ 2644 __le32 rx_skip_defrag_timeout_dup_detection_check; 2645 2646 /* Configuration for VoW : No of Video nodes to be supported and max 2647 * no of descriptors for each video link (node). 2648 */ 2649 __le32 vow_config; 2650 2651 /* Maximum vdev that could use gtk offload */ 2652 __le32 gtk_offload_max_vdev; 2653 2654 /* Number of msdu descriptors target should use */ 2655 __le32 num_msdu_desc; 2656 2657 /* Max number of tx fragments per MSDU. 2658 * This parameter controls the max number of tx fragments per MSDU. 2659 * This will passed by target as part of the WMI_SERVICE_READY event 2660 * and is overridden by the OS shim as required. 2661 */ 2662 __le32 max_frag_entries; 2663 2664 /* Max number of extended peer stats. 2665 * This parameter controls the max number of peers for which extended 2666 * statistics are supported by target 2667 */ 2668 __le32 max_peer_ext_stats; 2669 2670 /* Smart antenna capabilities information. 2671 * 1 - Smart antenna is enabled 2672 * 0 - Smart antenna is disabled 2673 * In future this can contain smart antenna specific capabilities. 2674 */ 2675 __le32 smart_ant_cap; 2676 2677 /* User can configure the buffers allocated for each AC (BE, BK, VI, VO) 2678 * during init. 2679 */ 2680 __le32 bk_minfree; 2681 __le32 be_minfree; 2682 __le32 vi_minfree; 2683 __le32 vo_minfree; 2684 2685 /* Rx batch mode capability. 2686 * 1 - Rx batch mode enabled 2687 * 0 - Rx batch mode disabled 2688 */ 2689 __le32 rx_batchmode; 2690 2691 /* Thermal throttling capability. 2692 * 1 - Capable of thermal throttling 2693 * 0 - Not capable of thermal throttling 2694 */ 2695 __le32 tt_support; 2696 2697 /* ATF configuration. 2698 * 1 - Enable ATF 2699 * 0 - Disable ATF 2700 */ 2701 __le32 atf_config; 2702 2703 /* Configure padding to manage IP header un-alignment 2704 * 1 - Enable padding 2705 * 0 - Disable padding 2706 */ 2707 __le32 iphdr_pad_config; 2708 2709 /* qwrap configuration (bits 15-0) 2710 * 1 - This is qwrap configuration 2711 * 0 - This is not qwrap 2712 * 2713 * Bits 31-16 is alloc_frag_desc_for_data_pkt (1 enables, 0 disables) 2714 * In order to get ack-RSSI reporting and to specify the tx-rate for 2715 * individual frames, this option must be enabled. This uses an extra 2716 * 4 bytes per tx-msdu descriptor, so don't enable it unless you need it. 2717 */ 2718 __le32 qwrap_config; 2719 } __packed; 2720 2721 /** 2722 * enum wmi_10_4_feature_mask - WMI 10.4 feature enable/disable flags 2723 * @WMI_10_4_LTEU_SUPPORT: LTEU config 2724 * @WMI_10_4_COEX_GPIO_SUPPORT: COEX GPIO config 2725 * @WMI_10_4_AUX_RADIO_SPECTRAL_INTF: AUX Radio Enhancement for spectral scan 2726 * @WMI_10_4_AUX_RADIO_CHAN_LOAD_INTF: AUX Radio Enhancement for chan load scan 2727 * @WMI_10_4_BSS_CHANNEL_INFO_64: BSS channel info stats 2728 * @WMI_10_4_PEER_STATS: Per station stats 2729 */ 2730 enum wmi_10_4_feature_mask { 2731 WMI_10_4_LTEU_SUPPORT = BIT(0), 2732 WMI_10_4_COEX_GPIO_SUPPORT = BIT(1), 2733 WMI_10_4_AUX_RADIO_SPECTRAL_INTF = BIT(2), 2734 WMI_10_4_AUX_RADIO_CHAN_LOAD_INTF = BIT(3), 2735 WMI_10_4_BSS_CHANNEL_INFO_64 = BIT(4), 2736 WMI_10_4_PEER_STATS = BIT(5), 2737 }; 2738 2739 struct wmi_ext_resource_config_10_4_cmd { 2740 /* contains enum wmi_host_platform_type */ 2741 __le32 host_platform_config; 2742 /* see enum wmi_10_4_feature_mask */ 2743 __le32 fw_feature_bitmap; 2744 }; 2745 2746 /* strucutre describing host memory chunk. */ 2747 struct host_memory_chunk { 2748 /* id of the request that is passed up in service ready */ 2749 __le32 req_id; 2750 /* the physical address the memory chunk */ 2751 __le32 ptr; 2752 /* size of the chunk */ 2753 __le32 size; 2754 } __packed; 2755 2756 struct wmi_host_mem_chunks { 2757 __le32 count; 2758 /* some fw revisions require at least 1 chunk regardless of count */ 2759 struct host_memory_chunk items[1]; 2760 } __packed; 2761 2762 struct wmi_init_cmd { 2763 struct wmi_resource_config resource_config; 2764 struct wmi_host_mem_chunks mem_chunks; 2765 } __packed; 2766 2767 /* _10x structure is from 10.X FW API */ 2768 struct wmi_init_cmd_10x { 2769 struct wmi_resource_config_10x resource_config; 2770 struct wmi_host_mem_chunks mem_chunks; 2771 } __packed; 2772 2773 struct wmi_init_cmd_10_2 { 2774 struct wmi_resource_config_10_2 resource_config; 2775 struct wmi_host_mem_chunks mem_chunks; 2776 } __packed; 2777 2778 struct wmi_init_cmd_10_4 { 2779 struct wmi_resource_config_10_4 resource_config; 2780 struct wmi_host_mem_chunks mem_chunks; 2781 } __packed; 2782 2783 struct wmi_chan_list_entry { 2784 __le16 freq; 2785 u8 phy_mode; /* valid for 10.2 only */ 2786 u8 reserved; 2787 } __packed; 2788 2789 /* TLV for channel list */ 2790 struct wmi_chan_list { 2791 __le32 tag; /* WMI_CHAN_LIST_TAG */ 2792 __le32 num_chan; 2793 struct wmi_chan_list_entry channel_list[0]; 2794 } __packed; 2795 2796 struct wmi_bssid_list { 2797 __le32 tag; /* WMI_BSSID_LIST_TAG */ 2798 __le32 num_bssid; 2799 struct wmi_mac_addr bssid_list[0]; 2800 } __packed; 2801 2802 struct wmi_ie_data { 2803 __le32 tag; /* WMI_IE_TAG */ 2804 __le32 ie_len; 2805 u8 ie_data[0]; 2806 } __packed; 2807 2808 struct wmi_ssid { 2809 __le32 ssid_len; 2810 u8 ssid[32]; 2811 } __packed; 2812 2813 struct wmi_ssid_list { 2814 __le32 tag; /* WMI_SSID_LIST_TAG */ 2815 __le32 num_ssids; 2816 struct wmi_ssid ssids[0]; 2817 } __packed; 2818 2819 /* prefix used by scan requestor ids on the host */ 2820 #define WMI_HOST_SCAN_REQUESTOR_ID_PREFIX 0xA000 2821 2822 /* prefix used by scan request ids generated on the host */ 2823 /* host cycles through the lower 12 bits to generate ids */ 2824 #define WMI_HOST_SCAN_REQ_ID_PREFIX 0xA000 2825 2826 #define WLAN_SCAN_PARAMS_MAX_SSID 16 2827 #define WLAN_SCAN_PARAMS_MAX_BSSID 4 2828 #define WLAN_SCAN_PARAMS_MAX_IE_LEN 256 2829 2830 /* Values lower than this may be refused by some firmware revisions with a scan 2831 * completion with a timedout reason. 2832 */ 2833 #define WMI_SCAN_CHAN_MIN_TIME_MSEC 40 2834 2835 /* Scan priority numbers must be sequential, starting with 0 */ 2836 enum wmi_scan_priority { 2837 WMI_SCAN_PRIORITY_VERY_LOW = 0, 2838 WMI_SCAN_PRIORITY_LOW, 2839 WMI_SCAN_PRIORITY_MEDIUM, 2840 WMI_SCAN_PRIORITY_HIGH, 2841 WMI_SCAN_PRIORITY_VERY_HIGH, 2842 WMI_SCAN_PRIORITY_COUNT /* number of priorities supported */ 2843 }; 2844 2845 struct wmi_start_scan_common { 2846 /* Scan ID */ 2847 __le32 scan_id; 2848 /* Scan requestor ID */ 2849 __le32 scan_req_id; 2850 /* VDEV id(interface) that is requesting scan */ 2851 __le32 vdev_id; 2852 /* Scan Priority, input to scan scheduler */ 2853 __le32 scan_priority; 2854 /* Scan events subscription */ 2855 __le32 notify_scan_events; 2856 /* dwell time in msec on active channels */ 2857 __le32 dwell_time_active; 2858 /* dwell time in msec on passive channels */ 2859 __le32 dwell_time_passive; 2860 /* 2861 * min time in msec on the BSS channel,only valid if atleast one 2862 * VDEV is active 2863 */ 2864 __le32 min_rest_time; 2865 /* 2866 * max rest time in msec on the BSS channel,only valid if at least 2867 * one VDEV is active 2868 */ 2869 /* 2870 * the scanner will rest on the bss channel at least min_rest_time 2871 * after min_rest_time the scanner will start checking for tx/rx 2872 * activity on all VDEVs. if there is no activity the scanner will 2873 * switch to off channel. if there is activity the scanner will let 2874 * the radio on the bss channel until max_rest_time expires.at 2875 * max_rest_time scanner will switch to off channel irrespective of 2876 * activity. activity is determined by the idle_time parameter. 2877 */ 2878 __le32 max_rest_time; 2879 /* 2880 * time before sending next set of probe requests. 2881 * The scanner keeps repeating probe requests transmission with 2882 * period specified by repeat_probe_time. 2883 * The number of probe requests specified depends on the ssid_list 2884 * and bssid_list 2885 */ 2886 __le32 repeat_probe_time; 2887 /* time in msec between 2 consequetive probe requests with in a set. */ 2888 __le32 probe_spacing_time; 2889 /* 2890 * data inactivity time in msec on bss channel that will be used by 2891 * scanner for measuring the inactivity. 2892 */ 2893 __le32 idle_time; 2894 /* maximum time in msec allowed for scan */ 2895 __le32 max_scan_time; 2896 /* 2897 * delay in msec before sending first probe request after switching 2898 * to a channel 2899 */ 2900 __le32 probe_delay; 2901 /* Scan control flags */ 2902 __le32 scan_ctrl_flags; 2903 } __packed; 2904 2905 struct wmi_start_scan_tlvs { 2906 /* TLV parameters. These includes channel list, ssid list, bssid list, 2907 * extra ies. 2908 */ 2909 u8 tlvs[0]; 2910 } __packed; 2911 2912 struct wmi_start_scan_cmd { 2913 struct wmi_start_scan_common common; 2914 __le32 burst_duration_ms; 2915 struct wmi_start_scan_tlvs tlvs; 2916 } __packed; 2917 2918 /* This is the definition from 10.X firmware branch */ 2919 struct wmi_10x_start_scan_cmd { 2920 struct wmi_start_scan_common common; 2921 struct wmi_start_scan_tlvs tlvs; 2922 } __packed; 2923 2924 struct wmi_ssid_arg { 2925 int len; 2926 const u8 *ssid; 2927 }; 2928 2929 struct wmi_bssid_arg { 2930 const u8 *bssid; 2931 }; 2932 2933 struct wmi_start_scan_arg { 2934 u32 scan_id; 2935 u32 scan_req_id; 2936 u32 vdev_id; 2937 u32 scan_priority; 2938 u32 notify_scan_events; 2939 u32 dwell_time_active; 2940 u32 dwell_time_passive; 2941 u32 min_rest_time; 2942 u32 max_rest_time; 2943 u32 repeat_probe_time; 2944 u32 probe_spacing_time; 2945 u32 idle_time; 2946 u32 max_scan_time; 2947 u32 probe_delay; 2948 u32 scan_ctrl_flags; 2949 u32 burst_duration_ms; 2950 2951 u32 ie_len; 2952 u32 n_channels; 2953 u32 n_ssids; 2954 u32 n_bssids; 2955 2956 u8 ie[WLAN_SCAN_PARAMS_MAX_IE_LEN]; 2957 u16 channels[64]; 2958 struct wmi_ssid_arg ssids[WLAN_SCAN_PARAMS_MAX_SSID]; 2959 struct wmi_bssid_arg bssids[WLAN_SCAN_PARAMS_MAX_BSSID]; 2960 }; 2961 2962 /* scan control flags */ 2963 2964 /* passively scan all channels including active channels */ 2965 #define WMI_SCAN_FLAG_PASSIVE 0x1 2966 /* add wild card ssid probe request even though ssid_list is specified. */ 2967 #define WMI_SCAN_ADD_BCAST_PROBE_REQ 0x2 2968 /* add cck rates to rates/xrate ie for the generated probe request */ 2969 #define WMI_SCAN_ADD_CCK_RATES 0x4 2970 /* add ofdm rates to rates/xrate ie for the generated probe request */ 2971 #define WMI_SCAN_ADD_OFDM_RATES 0x8 2972 /* To enable indication of Chan load and Noise floor to host */ 2973 #define WMI_SCAN_CHAN_STAT_EVENT 0x10 2974 /* Filter Probe request frames */ 2975 #define WMI_SCAN_FILTER_PROBE_REQ 0x20 2976 /* When set, DFS channels will not be scanned */ 2977 #define WMI_SCAN_BYPASS_DFS_CHN 0x40 2978 /* Different FW scan engine may choose to bail out on errors. 2979 * Allow the driver to have influence over that. 2980 */ 2981 #define WMI_SCAN_CONTINUE_ON_ERROR 0x80 2982 2983 /* WMI_SCAN_CLASS_MASK must be the same value as IEEE80211_SCAN_CLASS_MASK */ 2984 #define WMI_SCAN_CLASS_MASK 0xFF000000 2985 2986 enum wmi_stop_scan_type { 2987 WMI_SCAN_STOP_ONE = 0x00000000, /* stop by scan_id */ 2988 WMI_SCAN_STOP_VDEV_ALL = 0x01000000, /* stop by vdev_id */ 2989 WMI_SCAN_STOP_ALL = 0x04000000, /* stop all scans */ 2990 }; 2991 2992 struct wmi_stop_scan_cmd { 2993 __le32 scan_req_id; 2994 __le32 scan_id; 2995 __le32 req_type; 2996 __le32 vdev_id; 2997 } __packed; 2998 2999 struct wmi_stop_scan_arg { 3000 u32 req_id; 3001 enum wmi_stop_scan_type req_type; 3002 union { 3003 u32 scan_id; 3004 u32 vdev_id; 3005 } u; 3006 }; 3007 3008 struct wmi_scan_chan_list_cmd { 3009 __le32 num_scan_chans; 3010 struct wmi_channel chan_info[0]; 3011 } __packed; 3012 3013 struct wmi_scan_chan_list_arg { 3014 u32 n_channels; 3015 struct wmi_channel_arg *channels; 3016 }; 3017 3018 enum wmi_bss_filter { 3019 WMI_BSS_FILTER_NONE = 0, /* no beacons forwarded */ 3020 WMI_BSS_FILTER_ALL, /* all beacons forwarded */ 3021 WMI_BSS_FILTER_PROFILE, /* only beacons matching profile */ 3022 WMI_BSS_FILTER_ALL_BUT_PROFILE, /* all but beacons matching profile */ 3023 WMI_BSS_FILTER_CURRENT_BSS, /* only beacons matching current BSS */ 3024 WMI_BSS_FILTER_ALL_BUT_BSS, /* all but beacons matching BSS */ 3025 WMI_BSS_FILTER_PROBED_SSID, /* beacons matching probed ssid */ 3026 WMI_BSS_FILTER_LAST_BSS, /* marker only */ 3027 }; 3028 3029 enum wmi_scan_event_type { 3030 WMI_SCAN_EVENT_STARTED = BIT(0), 3031 WMI_SCAN_EVENT_COMPLETED = BIT(1), 3032 WMI_SCAN_EVENT_BSS_CHANNEL = BIT(2), 3033 WMI_SCAN_EVENT_FOREIGN_CHANNEL = BIT(3), 3034 WMI_SCAN_EVENT_DEQUEUED = BIT(4), 3035 /* possibly by high-prio scan */ 3036 WMI_SCAN_EVENT_PREEMPTED = BIT(5), 3037 WMI_SCAN_EVENT_START_FAILED = BIT(6), 3038 WMI_SCAN_EVENT_RESTARTED = BIT(7), 3039 WMI_SCAN_EVENT_FOREIGN_CHANNEL_EXIT = BIT(8), 3040 WMI_SCAN_EVENT_MAX = BIT(15), 3041 }; 3042 3043 enum wmi_scan_completion_reason { 3044 WMI_SCAN_REASON_COMPLETED, 3045 WMI_SCAN_REASON_CANCELLED, 3046 WMI_SCAN_REASON_PREEMPTED, 3047 WMI_SCAN_REASON_TIMEDOUT, 3048 WMI_SCAN_REASON_INTERNAL_FAILURE, 3049 WMI_SCAN_REASON_MAX, 3050 }; 3051 3052 struct wmi_scan_event { 3053 __le32 event_type; /* %WMI_SCAN_EVENT_ */ 3054 __le32 reason; /* %WMI_SCAN_REASON_ */ 3055 __le32 channel_freq; /* only valid for WMI_SCAN_EVENT_FOREIGN_CHANNEL */ 3056 __le32 scan_req_id; 3057 __le32 scan_id; 3058 __le32 vdev_id; 3059 } __packed; 3060 3061 /* 3062 * This defines how much headroom is kept in the 3063 * receive frame between the descriptor and the 3064 * payload, in order for the WMI PHY error and 3065 * management handler to insert header contents. 3066 * 3067 * This is in bytes. 3068 */ 3069 #define WMI_MGMT_RX_HDR_HEADROOM 52 3070 3071 /* 3072 * This event will be used for sending scan results 3073 * as well as rx mgmt frames to the host. The rx buffer 3074 * will be sent as part of this WMI event. It would be a 3075 * good idea to pass all the fields in the RX status 3076 * descriptor up to the host. 3077 */ 3078 struct wmi_mgmt_rx_hdr_v1 { 3079 __le32 channel; 3080 __le32 snr; 3081 __le32 rate; 3082 __le32 phy_mode; 3083 __le32 buf_len; 3084 __le32 status; /* %WMI_RX_STATUS_ */ 3085 } __packed; 3086 3087 struct wmi_mgmt_rx_hdr_v2 { 3088 struct wmi_mgmt_rx_hdr_v1 v1; 3089 __le32 rssi_ctl[4]; 3090 } __packed; 3091 3092 struct wmi_mgmt_rx_event_v1 { 3093 struct wmi_mgmt_rx_hdr_v1 hdr; 3094 u8 buf[0]; 3095 } __packed; 3096 3097 struct wmi_mgmt_rx_event_v2 { 3098 struct wmi_mgmt_rx_hdr_v2 hdr; 3099 u8 buf[0]; 3100 } __packed; 3101 3102 struct wmi_10_4_mgmt_rx_hdr { 3103 __le32 channel; 3104 __le32 snr; 3105 u8 rssi_ctl[4]; 3106 __le32 rate; 3107 __le32 phy_mode; 3108 __le32 buf_len; 3109 __le32 status; 3110 } __packed; 3111 3112 struct wmi_10_4_mgmt_rx_event { 3113 struct wmi_10_4_mgmt_rx_hdr hdr; 3114 u8 buf[0]; 3115 } __packed; 3116 3117 struct wmi_mgmt_rx_ext_info { 3118 __le64 rx_mac_timestamp; 3119 } __packed __aligned(4); 3120 3121 #define WMI_RX_STATUS_OK 0x00 3122 #define WMI_RX_STATUS_ERR_CRC 0x01 3123 #define WMI_RX_STATUS_ERR_DECRYPT 0x08 3124 #define WMI_RX_STATUS_ERR_MIC 0x10 3125 #define WMI_RX_STATUS_ERR_KEY_CACHE_MISS 0x20 3126 /* Extension data at the end of mgmt frame */ 3127 #define WMI_RX_STATUS_EXT_INFO 0x40 3128 3129 #define PHY_ERROR_GEN_SPECTRAL_SCAN 0x26 3130 #define PHY_ERROR_GEN_FALSE_RADAR_EXT 0x24 3131 #define PHY_ERROR_GEN_RADAR 0x05 3132 3133 #define PHY_ERROR_10_4_RADAR_MASK 0x4 3134 #define PHY_ERROR_10_4_SPECTRAL_SCAN_MASK 0x4000000 3135 3136 enum phy_err_type { 3137 PHY_ERROR_UNKNOWN, 3138 PHY_ERROR_SPECTRAL_SCAN, 3139 PHY_ERROR_FALSE_RADAR_EXT, 3140 PHY_ERROR_RADAR 3141 }; 3142 3143 struct wmi_phyerr { 3144 __le32 tsf_timestamp; 3145 __le16 freq1; 3146 __le16 freq2; 3147 u8 rssi_combined; 3148 u8 chan_width_mhz; 3149 u8 phy_err_code; 3150 u8 rsvd0; 3151 __le32 rssi_chains[4]; 3152 __le16 nf_chains[4]; 3153 __le32 buf_len; 3154 u8 buf[0]; 3155 } __packed; 3156 3157 struct wmi_phyerr_event { 3158 __le32 num_phyerrs; 3159 __le32 tsf_l32; 3160 __le32 tsf_u32; 3161 struct wmi_phyerr phyerrs[0]; 3162 } __packed; 3163 3164 struct wmi_10_4_phyerr_event { 3165 __le32 tsf_l32; 3166 __le32 tsf_u32; 3167 __le16 freq1; 3168 __le16 freq2; 3169 u8 rssi_combined; 3170 u8 chan_width_mhz; 3171 u8 phy_err_code; 3172 u8 rsvd0; 3173 __le32 rssi_chains[4]; 3174 __le16 nf_chains[4]; 3175 __le32 phy_err_mask[2]; 3176 __le32 tsf_timestamp; 3177 __le32 buf_len; 3178 u8 buf[0]; 3179 } __packed; 3180 3181 #define PHYERR_TLV_SIG 0xBB 3182 #define PHYERR_TLV_TAG_SEARCH_FFT_REPORT 0xFB 3183 #define PHYERR_TLV_TAG_RADAR_PULSE_SUMMARY 0xF8 3184 #define PHYERR_TLV_TAG_SPECTRAL_SUMMARY_REPORT 0xF9 3185 3186 struct phyerr_radar_report { 3187 __le32 reg0; /* RADAR_REPORT_REG0_* */ 3188 __le32 reg1; /* RADAR_REPORT_REG1_* */ 3189 } __packed; 3190 3191 #define RADAR_REPORT_REG0_PULSE_IS_CHIRP_MASK 0x80000000 3192 #define RADAR_REPORT_REG0_PULSE_IS_CHIRP_LSB 31 3193 3194 #define RADAR_REPORT_REG0_PULSE_IS_MAX_WIDTH_MASK 0x40000000 3195 #define RADAR_REPORT_REG0_PULSE_IS_MAX_WIDTH_LSB 30 3196 3197 #define RADAR_REPORT_REG0_AGC_TOTAL_GAIN_MASK 0x3FF00000 3198 #define RADAR_REPORT_REG0_AGC_TOTAL_GAIN_LSB 20 3199 3200 #define RADAR_REPORT_REG0_PULSE_DELTA_DIFF_MASK 0x000F0000 3201 #define RADAR_REPORT_REG0_PULSE_DELTA_DIFF_LSB 16 3202 3203 #define RADAR_REPORT_REG0_PULSE_DELTA_PEAK_MASK 0x0000FC00 3204 #define RADAR_REPORT_REG0_PULSE_DELTA_PEAK_LSB 10 3205 3206 #define RADAR_REPORT_REG0_PULSE_SIDX_MASK 0x000003FF 3207 #define RADAR_REPORT_REG0_PULSE_SIDX_LSB 0 3208 3209 #define RADAR_REPORT_REG1_PULSE_SRCH_FFT_VALID_MASK 0x80000000 3210 #define RADAR_REPORT_REG1_PULSE_SRCH_FFT_VALID_LSB 31 3211 3212 #define RADAR_REPORT_REG1_PULSE_AGC_MB_GAIN_MASK 0x7F000000 3213 #define RADAR_REPORT_REG1_PULSE_AGC_MB_GAIN_LSB 24 3214 3215 #define RADAR_REPORT_REG1_PULSE_SUBCHAN_MASK_MASK 0x00FF0000 3216 #define RADAR_REPORT_REG1_PULSE_SUBCHAN_MASK_LSB 16 3217 3218 #define RADAR_REPORT_REG1_PULSE_TSF_OFFSET_MASK 0x0000FF00 3219 #define RADAR_REPORT_REG1_PULSE_TSF_OFFSET_LSB 8 3220 3221 #define RADAR_REPORT_REG1_PULSE_DUR_MASK 0x000000FF 3222 #define RADAR_REPORT_REG1_PULSE_DUR_LSB 0 3223 3224 struct phyerr_fft_report { 3225 __le32 reg0; /* SEARCH_FFT_REPORT_REG0_ * */ 3226 __le32 reg1; /* SEARCH_FFT_REPORT_REG1_ * */ 3227 } __packed; 3228 3229 #define SEARCH_FFT_REPORT_REG0_TOTAL_GAIN_DB_MASK 0xFF800000 3230 #define SEARCH_FFT_REPORT_REG0_TOTAL_GAIN_DB_LSB 23 3231 3232 #define SEARCH_FFT_REPORT_REG0_BASE_PWR_DB_MASK 0x007FC000 3233 #define SEARCH_FFT_REPORT_REG0_BASE_PWR_DB_LSB 14 3234 3235 #define SEARCH_FFT_REPORT_REG0_FFT_CHN_IDX_MASK 0x00003000 3236 #define SEARCH_FFT_REPORT_REG0_FFT_CHN_IDX_LSB 12 3237 3238 #define SEARCH_FFT_REPORT_REG0_PEAK_SIDX_MASK 0x00000FFF 3239 #define SEARCH_FFT_REPORT_REG0_PEAK_SIDX_LSB 0 3240 3241 #define SEARCH_FFT_REPORT_REG1_RELPWR_DB_MASK 0xFC000000 3242 #define SEARCH_FFT_REPORT_REG1_RELPWR_DB_LSB 26 3243 3244 #define SEARCH_FFT_REPORT_REG1_AVGPWR_DB_MASK 0x03FC0000 3245 #define SEARCH_FFT_REPORT_REG1_AVGPWR_DB_LSB 18 3246 3247 #define SEARCH_FFT_REPORT_REG1_PEAK_MAG_MASK 0x0003FF00 3248 #define SEARCH_FFT_REPORT_REG1_PEAK_MAG_LSB 8 3249 3250 #define SEARCH_FFT_REPORT_REG1_NUM_STR_BINS_IB_MASK 0x000000FF 3251 #define SEARCH_FFT_REPORT_REG1_NUM_STR_BINS_IB_LSB 0 3252 3253 struct phyerr_tlv { 3254 __le16 len; 3255 u8 tag; 3256 u8 sig; 3257 } __packed; 3258 3259 #define DFS_RSSI_POSSIBLY_FALSE 50 3260 #define DFS_PEAK_MAG_THOLD_POSSIBLY_FALSE 40 3261 3262 struct wmi_mgmt_tx_hdr { 3263 __le32 vdev_id; 3264 struct wmi_mac_addr peer_macaddr; 3265 __le32 tx_rate; 3266 __le32 tx_power; 3267 __le32 buf_len; 3268 } __packed; 3269 3270 struct wmi_mgmt_tx_cmd { 3271 struct wmi_mgmt_tx_hdr hdr; 3272 u8 buf[0]; 3273 } __packed; 3274 3275 struct wmi_echo_event { 3276 __le32 value; 3277 } __packed; 3278 3279 struct wmi_echo_cmd { 3280 __le32 value; 3281 } __packed; 3282 3283 struct wmi_pdev_set_regdomain_cmd { 3284 __le32 reg_domain; 3285 __le32 reg_domain_2G; 3286 __le32 reg_domain_5G; 3287 __le32 conformance_test_limit_2G; 3288 __le32 conformance_test_limit_5G; 3289 } __packed; 3290 3291 enum wmi_dfs_region { 3292 /* Uninitialized dfs domain */ 3293 WMI_UNINIT_DFS_DOMAIN = 0, 3294 3295 /* FCC3 dfs domain */ 3296 WMI_FCC_DFS_DOMAIN = 1, 3297 3298 /* ETSI dfs domain */ 3299 WMI_ETSI_DFS_DOMAIN = 2, 3300 3301 /*Japan dfs domain */ 3302 WMI_MKK4_DFS_DOMAIN = 3, 3303 }; 3304 3305 struct wmi_pdev_set_regdomain_cmd_10x { 3306 __le32 reg_domain; 3307 __le32 reg_domain_2G; 3308 __le32 reg_domain_5G; 3309 __le32 conformance_test_limit_2G; 3310 __le32 conformance_test_limit_5G; 3311 3312 /* dfs domain from wmi_dfs_region */ 3313 __le32 dfs_domain; 3314 } __packed; 3315 3316 /* Command to set/unset chip in quiet mode */ 3317 struct wmi_pdev_set_quiet_cmd { 3318 /* period in TUs */ 3319 __le32 period; 3320 3321 /* duration in TUs */ 3322 __le32 duration; 3323 3324 /* offset in TUs */ 3325 __le32 next_start; 3326 3327 /* enable/disable */ 3328 __le32 enabled; 3329 } __packed; 3330 3331 /* 3332 * 802.11g protection mode. 3333 */ 3334 enum ath10k_protmode { 3335 ATH10K_PROT_NONE = 0, /* no protection */ 3336 ATH10K_PROT_CTSONLY = 1, /* CTS to self */ 3337 ATH10K_PROT_RTSCTS = 2, /* RTS-CTS */ 3338 }; 3339 3340 enum wmi_rtscts_profile { 3341 WMI_RTSCTS_FOR_NO_RATESERIES = 0, 3342 WMI_RTSCTS_FOR_SECOND_RATESERIES, 3343 WMI_RTSCTS_ACROSS_SW_RETRIES 3344 }; 3345 3346 #define WMI_RTSCTS_ENABLED 1 3347 #define WMI_RTSCTS_SET_MASK 0x0f 3348 #define WMI_RTSCTS_SET_LSB 0 3349 3350 #define WMI_RTSCTS_PROFILE_MASK 0xf0 3351 #define WMI_RTSCTS_PROFILE_LSB 4 3352 3353 enum wmi_beacon_gen_mode { 3354 WMI_BEACON_STAGGERED_MODE = 0, 3355 WMI_BEACON_BURST_MODE = 1 3356 }; 3357 3358 enum wmi_csa_event_ies_present_flag { 3359 WMI_CSA_IE_PRESENT = 0x00000001, 3360 WMI_XCSA_IE_PRESENT = 0x00000002, 3361 WMI_WBW_IE_PRESENT = 0x00000004, 3362 WMI_CSWARP_IE_PRESENT = 0x00000008, 3363 }; 3364 3365 /* wmi CSA receive event from beacon frame */ 3366 struct wmi_csa_event { 3367 __le32 i_fc_dur; 3368 /* Bit 0-15: FC */ 3369 /* Bit 16-31: DUR */ 3370 struct wmi_mac_addr i_addr1; 3371 struct wmi_mac_addr i_addr2; 3372 __le32 csa_ie[2]; 3373 __le32 xcsa_ie[2]; 3374 __le32 wb_ie[2]; 3375 __le32 cswarp_ie; 3376 __le32 ies_present_flag; /* wmi_csa_event_ies_present_flag */ 3377 } __packed; 3378 3379 /* the definition of different PDEV parameters */ 3380 #define PDEV_DEFAULT_STATS_UPDATE_PERIOD 500 3381 #define VDEV_DEFAULT_STATS_UPDATE_PERIOD 500 3382 #define PEER_DEFAULT_STATS_UPDATE_PERIOD 500 3383 3384 struct wmi_pdev_param_map { 3385 u32 tx_chain_mask; 3386 u32 rx_chain_mask; 3387 u32 txpower_limit2g; 3388 u32 txpower_limit5g; 3389 u32 txpower_scale; 3390 u32 beacon_gen_mode; 3391 u32 beacon_tx_mode; 3392 u32 resmgr_offchan_mode; 3393 u32 protection_mode; 3394 u32 dynamic_bw; 3395 u32 non_agg_sw_retry_th; 3396 u32 agg_sw_retry_th; 3397 u32 sta_kickout_th; 3398 u32 ac_aggrsize_scaling; 3399 u32 ltr_enable; 3400 u32 ltr_ac_latency_be; 3401 u32 ltr_ac_latency_bk; 3402 u32 ltr_ac_latency_vi; 3403 u32 ltr_ac_latency_vo; 3404 u32 ltr_ac_latency_timeout; 3405 u32 ltr_sleep_override; 3406 u32 ltr_rx_override; 3407 u32 ltr_tx_activity_timeout; 3408 u32 l1ss_enable; 3409 u32 dsleep_enable; 3410 u32 pcielp_txbuf_flush; 3411 u32 pcielp_txbuf_watermark; 3412 u32 pcielp_txbuf_tmo_en; 3413 u32 pcielp_txbuf_tmo_value; 3414 u32 pdev_stats_update_period; 3415 u32 vdev_stats_update_period; 3416 u32 peer_stats_update_period; 3417 u32 bcnflt_stats_update_period; 3418 u32 pmf_qos; 3419 u32 arp_ac_override; 3420 u32 dcs; 3421 u32 ani_enable; 3422 u32 ani_poll_period; 3423 u32 ani_listen_period; 3424 u32 ani_ofdm_level; 3425 u32 ani_cck_level; 3426 u32 dyntxchain; 3427 u32 proxy_sta; 3428 u32 idle_ps_config; 3429 u32 power_gating_sleep; 3430 u32 fast_channel_reset; 3431 u32 burst_dur; 3432 u32 burst_enable; 3433 u32 cal_period; 3434 u32 aggr_burst; 3435 u32 rx_decap_mode; 3436 u32 smart_antenna_default_antenna; 3437 u32 igmpmld_override; 3438 u32 igmpmld_tid; 3439 u32 antenna_gain; 3440 u32 rx_filter; 3441 u32 set_mcast_to_ucast_tid; 3442 u32 proxy_sta_mode; 3443 u32 set_mcast2ucast_mode; 3444 u32 set_mcast2ucast_buffer; 3445 u32 remove_mcast2ucast_buffer; 3446 u32 peer_sta_ps_statechg_enable; 3447 u32 igmpmld_ac_override; 3448 u32 block_interbss; 3449 u32 set_disable_reset_cmdid; 3450 u32 set_msdu_ttl_cmdid; 3451 u32 set_ppdu_duration_cmdid; 3452 u32 txbf_sound_period_cmdid; 3453 u32 set_promisc_mode_cmdid; 3454 u32 set_burst_mode_cmdid; 3455 u32 en_stats; 3456 u32 mu_group_policy; 3457 u32 noise_detection; 3458 u32 noise_threshold; 3459 u32 dpd_enable; 3460 u32 set_mcast_bcast_echo; 3461 u32 atf_strict_sch; 3462 u32 atf_sched_duration; 3463 u32 ant_plzn; 3464 u32 mgmt_retry_limit; 3465 u32 sensitivity_level; 3466 u32 signed_txpower_2g; 3467 u32 signed_txpower_5g; 3468 u32 enable_per_tid_amsdu; 3469 u32 enable_per_tid_ampdu; 3470 u32 cca_threshold; 3471 u32 rts_fixed_rate; 3472 u32 pdev_reset; 3473 u32 wapi_mbssid_offset; 3474 u32 arp_srcaddr; 3475 u32 arp_dstaddr; 3476 u32 enable_btcoex; 3477 }; 3478 3479 #define WMI_PDEV_PARAM_UNSUPPORTED 0 3480 3481 enum wmi_pdev_param { 3482 /* TX chain mask */ 3483 WMI_PDEV_PARAM_TX_CHAIN_MASK = 0x1, 3484 /* RX chain mask */ 3485 WMI_PDEV_PARAM_RX_CHAIN_MASK, 3486 /* TX power limit for 2G Radio */ 3487 WMI_PDEV_PARAM_TXPOWER_LIMIT2G, 3488 /* TX power limit for 5G Radio */ 3489 WMI_PDEV_PARAM_TXPOWER_LIMIT5G, 3490 /* TX power scale */ 3491 WMI_PDEV_PARAM_TXPOWER_SCALE, 3492 /* Beacon generation mode . 0: host, 1: target */ 3493 WMI_PDEV_PARAM_BEACON_GEN_MODE, 3494 /* Beacon generation mode . 0: staggered 1: bursted */ 3495 WMI_PDEV_PARAM_BEACON_TX_MODE, 3496 /* 3497 * Resource manager off chan mode . 3498 * 0: turn off off chan mode. 1: turn on offchan mode 3499 */ 3500 WMI_PDEV_PARAM_RESMGR_OFFCHAN_MODE, 3501 /* 3502 * Protection mode: 3503 * 0: no protection 1:use CTS-to-self 2: use RTS/CTS 3504 */ 3505 WMI_PDEV_PARAM_PROTECTION_MODE, 3506 /* 3507 * Dynamic bandwidth - 0: disable, 1: enable 3508 * 3509 * When enabled HW rate control tries different bandwidths when 3510 * retransmitting frames. 3511 */ 3512 WMI_PDEV_PARAM_DYNAMIC_BW, 3513 /* Non aggregrate/ 11g sw retry threshold.0-disable */ 3514 WMI_PDEV_PARAM_NON_AGG_SW_RETRY_TH, 3515 /* aggregrate sw retry threshold. 0-disable*/ 3516 WMI_PDEV_PARAM_AGG_SW_RETRY_TH, 3517 /* Station kickout threshold (non of consecutive failures).0-disable */ 3518 WMI_PDEV_PARAM_STA_KICKOUT_TH, 3519 /* Aggerate size scaling configuration per AC */ 3520 WMI_PDEV_PARAM_AC_AGGRSIZE_SCALING, 3521 /* LTR enable */ 3522 WMI_PDEV_PARAM_LTR_ENABLE, 3523 /* LTR latency for BE, in us */ 3524 WMI_PDEV_PARAM_LTR_AC_LATENCY_BE, 3525 /* LTR latency for BK, in us */ 3526 WMI_PDEV_PARAM_LTR_AC_LATENCY_BK, 3527 /* LTR latency for VI, in us */ 3528 WMI_PDEV_PARAM_LTR_AC_LATENCY_VI, 3529 /* LTR latency for VO, in us */ 3530 WMI_PDEV_PARAM_LTR_AC_LATENCY_VO, 3531 /* LTR AC latency timeout, in ms */ 3532 WMI_PDEV_PARAM_LTR_AC_LATENCY_TIMEOUT, 3533 /* LTR platform latency override, in us */ 3534 WMI_PDEV_PARAM_LTR_SLEEP_OVERRIDE, 3535 /* LTR-RX override, in us */ 3536 WMI_PDEV_PARAM_LTR_RX_OVERRIDE, 3537 /* Tx activity timeout for LTR, in us */ 3538 WMI_PDEV_PARAM_LTR_TX_ACTIVITY_TIMEOUT, 3539 /* L1SS state machine enable */ 3540 WMI_PDEV_PARAM_L1SS_ENABLE, 3541 /* Deep sleep state machine enable */ 3542 WMI_PDEV_PARAM_DSLEEP_ENABLE, 3543 /* RX buffering flush enable */ 3544 WMI_PDEV_PARAM_PCIELP_TXBUF_FLUSH, 3545 /* RX buffering matermark */ 3546 WMI_PDEV_PARAM_PCIELP_TXBUF_WATERMARK, 3547 /* RX buffering timeout enable */ 3548 WMI_PDEV_PARAM_PCIELP_TXBUF_TMO_EN, 3549 /* RX buffering timeout value */ 3550 WMI_PDEV_PARAM_PCIELP_TXBUF_TMO_VALUE, 3551 /* pdev level stats update period in ms */ 3552 WMI_PDEV_PARAM_PDEV_STATS_UPDATE_PERIOD, 3553 /* vdev level stats update period in ms */ 3554 WMI_PDEV_PARAM_VDEV_STATS_UPDATE_PERIOD, 3555 /* peer level stats update period in ms */ 3556 WMI_PDEV_PARAM_PEER_STATS_UPDATE_PERIOD, 3557 /* beacon filter status update period */ 3558 WMI_PDEV_PARAM_BCNFLT_STATS_UPDATE_PERIOD, 3559 /* QOS Mgmt frame protection MFP/PMF 0: disable, 1: enable */ 3560 WMI_PDEV_PARAM_PMF_QOS, 3561 /* Access category on which ARP frames are sent */ 3562 WMI_PDEV_PARAM_ARP_AC_OVERRIDE, 3563 /* DCS configuration */ 3564 WMI_PDEV_PARAM_DCS, 3565 /* Enable/Disable ANI on target */ 3566 WMI_PDEV_PARAM_ANI_ENABLE, 3567 /* configure the ANI polling period */ 3568 WMI_PDEV_PARAM_ANI_POLL_PERIOD, 3569 /* configure the ANI listening period */ 3570 WMI_PDEV_PARAM_ANI_LISTEN_PERIOD, 3571 /* configure OFDM immunity level */ 3572 WMI_PDEV_PARAM_ANI_OFDM_LEVEL, 3573 /* configure CCK immunity level */ 3574 WMI_PDEV_PARAM_ANI_CCK_LEVEL, 3575 /* Enable/Disable CDD for 1x1 STAs in rate control module */ 3576 WMI_PDEV_PARAM_DYNTXCHAIN, 3577 /* Enable/Disable proxy STA */ 3578 WMI_PDEV_PARAM_PROXY_STA, 3579 /* Enable/Disable low power state when all VDEVs are inactive/idle. */ 3580 WMI_PDEV_PARAM_IDLE_PS_CONFIG, 3581 /* Enable/Disable power gating sleep */ 3582 WMI_PDEV_PARAM_POWER_GATING_SLEEP, 3583 }; 3584 3585 enum wmi_10x_pdev_param { 3586 /* TX chian mask */ 3587 WMI_10X_PDEV_PARAM_TX_CHAIN_MASK = 0x1, 3588 /* RX chian mask */ 3589 WMI_10X_PDEV_PARAM_RX_CHAIN_MASK, 3590 /* TX power limit for 2G Radio */ 3591 WMI_10X_PDEV_PARAM_TXPOWER_LIMIT2G, 3592 /* TX power limit for 5G Radio */ 3593 WMI_10X_PDEV_PARAM_TXPOWER_LIMIT5G, 3594 /* TX power scale */ 3595 WMI_10X_PDEV_PARAM_TXPOWER_SCALE, 3596 /* Beacon generation mode . 0: host, 1: target */ 3597 WMI_10X_PDEV_PARAM_BEACON_GEN_MODE, 3598 /* Beacon generation mode . 0: staggered 1: bursted */ 3599 WMI_10X_PDEV_PARAM_BEACON_TX_MODE, 3600 /* 3601 * Resource manager off chan mode . 3602 * 0: turn off off chan mode. 1: turn on offchan mode 3603 */ 3604 WMI_10X_PDEV_PARAM_RESMGR_OFFCHAN_MODE, 3605 /* 3606 * Protection mode: 3607 * 0: no protection 1:use CTS-to-self 2: use RTS/CTS 3608 */ 3609 WMI_10X_PDEV_PARAM_PROTECTION_MODE, 3610 /* Dynamic bandwidth 0: disable 1: enable */ 3611 WMI_10X_PDEV_PARAM_DYNAMIC_BW, 3612 /* Non aggregrate/ 11g sw retry threshold.0-disable */ 3613 WMI_10X_PDEV_PARAM_NON_AGG_SW_RETRY_TH, 3614 /* aggregrate sw retry threshold. 0-disable*/ 3615 WMI_10X_PDEV_PARAM_AGG_SW_RETRY_TH, 3616 /* Station kickout threshold (non of consecutive failures).0-disable */ 3617 WMI_10X_PDEV_PARAM_STA_KICKOUT_TH, 3618 /* Aggerate size scaling configuration per AC */ 3619 WMI_10X_PDEV_PARAM_AC_AGGRSIZE_SCALING, 3620 /* LTR enable */ 3621 WMI_10X_PDEV_PARAM_LTR_ENABLE, 3622 /* LTR latency for BE, in us */ 3623 WMI_10X_PDEV_PARAM_LTR_AC_LATENCY_BE, 3624 /* LTR latency for BK, in us */ 3625 WMI_10X_PDEV_PARAM_LTR_AC_LATENCY_BK, 3626 /* LTR latency for VI, in us */ 3627 WMI_10X_PDEV_PARAM_LTR_AC_LATENCY_VI, 3628 /* LTR latency for VO, in us */ 3629 WMI_10X_PDEV_PARAM_LTR_AC_LATENCY_VO, 3630 /* LTR AC latency timeout, in ms */ 3631 WMI_10X_PDEV_PARAM_LTR_AC_LATENCY_TIMEOUT, 3632 /* LTR platform latency override, in us */ 3633 WMI_10X_PDEV_PARAM_LTR_SLEEP_OVERRIDE, 3634 /* LTR-RX override, in us */ 3635 WMI_10X_PDEV_PARAM_LTR_RX_OVERRIDE, 3636 /* Tx activity timeout for LTR, in us */ 3637 WMI_10X_PDEV_PARAM_LTR_TX_ACTIVITY_TIMEOUT, 3638 /* L1SS state machine enable */ 3639 WMI_10X_PDEV_PARAM_L1SS_ENABLE, 3640 /* Deep sleep state machine enable */ 3641 WMI_10X_PDEV_PARAM_DSLEEP_ENABLE, 3642 /* pdev level stats update period in ms */ 3643 WMI_10X_PDEV_PARAM_PDEV_STATS_UPDATE_PERIOD, 3644 /* vdev level stats update period in ms */ 3645 WMI_10X_PDEV_PARAM_VDEV_STATS_UPDATE_PERIOD, 3646 /* peer level stats update period in ms */ 3647 WMI_10X_PDEV_PARAM_PEER_STATS_UPDATE_PERIOD, 3648 /* beacon filter status update period */ 3649 WMI_10X_PDEV_PARAM_BCNFLT_STATS_UPDATE_PERIOD, 3650 /* QOS Mgmt frame protection MFP/PMF 0: disable, 1: enable */ 3651 WMI_10X_PDEV_PARAM_PMF_QOS, 3652 /* Access category on which ARP and DHCP frames are sent */ 3653 WMI_10X_PDEV_PARAM_ARPDHCP_AC_OVERRIDE, 3654 /* DCS configuration */ 3655 WMI_10X_PDEV_PARAM_DCS, 3656 /* Enable/Disable ANI on target */ 3657 WMI_10X_PDEV_PARAM_ANI_ENABLE, 3658 /* configure the ANI polling period */ 3659 WMI_10X_PDEV_PARAM_ANI_POLL_PERIOD, 3660 /* configure the ANI listening period */ 3661 WMI_10X_PDEV_PARAM_ANI_LISTEN_PERIOD, 3662 /* configure OFDM immunity level */ 3663 WMI_10X_PDEV_PARAM_ANI_OFDM_LEVEL, 3664 /* configure CCK immunity level */ 3665 WMI_10X_PDEV_PARAM_ANI_CCK_LEVEL, 3666 /* Enable/Disable CDD for 1x1 STAs in rate control module */ 3667 WMI_10X_PDEV_PARAM_DYNTXCHAIN, 3668 /* Enable/Disable Fast channel reset*/ 3669 WMI_10X_PDEV_PARAM_FAST_CHANNEL_RESET, 3670 /* Set Bursting DUR */ 3671 WMI_10X_PDEV_PARAM_BURST_DUR, 3672 /* Set Bursting Enable*/ 3673 WMI_10X_PDEV_PARAM_BURST_ENABLE, 3674 3675 /* following are available as of firmware 10.2 */ 3676 WMI_10X_PDEV_PARAM_SMART_ANTENNA_DEFAULT_ANTENNA, 3677 WMI_10X_PDEV_PARAM_IGMPMLD_OVERRIDE, 3678 WMI_10X_PDEV_PARAM_IGMPMLD_TID, 3679 WMI_10X_PDEV_PARAM_ANTENNA_GAIN, 3680 WMI_10X_PDEV_PARAM_RX_DECAP_MODE, 3681 WMI_10X_PDEV_PARAM_RX_FILTER, 3682 WMI_10X_PDEV_PARAM_SET_MCAST_TO_UCAST_TID, 3683 WMI_10X_PDEV_PARAM_PROXY_STA_MODE, 3684 WMI_10X_PDEV_PARAM_SET_MCAST2UCAST_MODE, 3685 WMI_10X_PDEV_PARAM_SET_MCAST2UCAST_BUFFER, 3686 WMI_10X_PDEV_PARAM_REMOVE_MCAST2UCAST_BUFFER, 3687 WMI_10X_PDEV_PARAM_PEER_STA_PS_STATECHG_ENABLE, 3688 WMI_10X_PDEV_PARAM_RTS_FIXED_RATE, 3689 WMI_10X_PDEV_PARAM_CAL_PERIOD 3690 }; 3691 3692 enum wmi_10_4_pdev_param { 3693 WMI_10_4_PDEV_PARAM_TX_CHAIN_MASK = 0x1, 3694 WMI_10_4_PDEV_PARAM_RX_CHAIN_MASK, 3695 WMI_10_4_PDEV_PARAM_TXPOWER_LIMIT2G, 3696 WMI_10_4_PDEV_PARAM_TXPOWER_LIMIT5G, 3697 WMI_10_4_PDEV_PARAM_TXPOWER_SCALE, 3698 WMI_10_4_PDEV_PARAM_BEACON_GEN_MODE, 3699 WMI_10_4_PDEV_PARAM_BEACON_TX_MODE, 3700 WMI_10_4_PDEV_PARAM_RESMGR_OFFCHAN_MODE, 3701 WMI_10_4_PDEV_PARAM_PROTECTION_MODE, 3702 WMI_10_4_PDEV_PARAM_DYNAMIC_BW, 3703 WMI_10_4_PDEV_PARAM_NON_AGG_SW_RETRY_TH, 3704 WMI_10_4_PDEV_PARAM_AGG_SW_RETRY_TH, 3705 WMI_10_4_PDEV_PARAM_STA_KICKOUT_TH, 3706 WMI_10_4_PDEV_PARAM_AC_AGGRSIZE_SCALING, 3707 WMI_10_4_PDEV_PARAM_LTR_ENABLE, 3708 WMI_10_4_PDEV_PARAM_LTR_AC_LATENCY_BE, 3709 WMI_10_4_PDEV_PARAM_LTR_AC_LATENCY_BK, 3710 WMI_10_4_PDEV_PARAM_LTR_AC_LATENCY_VI, 3711 WMI_10_4_PDEV_PARAM_LTR_AC_LATENCY_VO, 3712 WMI_10_4_PDEV_PARAM_LTR_AC_LATENCY_TIMEOUT, 3713 WMI_10_4_PDEV_PARAM_LTR_SLEEP_OVERRIDE, 3714 WMI_10_4_PDEV_PARAM_LTR_RX_OVERRIDE, 3715 WMI_10_4_PDEV_PARAM_LTR_TX_ACTIVITY_TIMEOUT, 3716 WMI_10_4_PDEV_PARAM_L1SS_ENABLE, 3717 WMI_10_4_PDEV_PARAM_DSLEEP_ENABLE, 3718 WMI_10_4_PDEV_PARAM_PCIELP_TXBUF_FLUSH, 3719 WMI_10_4_PDEV_PARAM_PCIELP_TXBUF_WATERMARK, 3720 WMI_10_4_PDEV_PARAM_PCIELP_TXBUF_TMO_EN, 3721 WMI_10_4_PDEV_PARAM_PCIELP_TXBUF_TMO_VALUE, 3722 WMI_10_4_PDEV_PARAM_PDEV_STATS_UPDATE_PERIOD, 3723 WMI_10_4_PDEV_PARAM_VDEV_STATS_UPDATE_PERIOD, 3724 WMI_10_4_PDEV_PARAM_PEER_STATS_UPDATE_PERIOD, 3725 WMI_10_4_PDEV_PARAM_BCNFLT_STATS_UPDATE_PERIOD, 3726 WMI_10_4_PDEV_PARAM_PMF_QOS, 3727 WMI_10_4_PDEV_PARAM_ARP_AC_OVERRIDE, 3728 WMI_10_4_PDEV_PARAM_DCS, 3729 WMI_10_4_PDEV_PARAM_ANI_ENABLE, 3730 WMI_10_4_PDEV_PARAM_ANI_POLL_PERIOD, 3731 WMI_10_4_PDEV_PARAM_ANI_LISTEN_PERIOD, 3732 WMI_10_4_PDEV_PARAM_ANI_OFDM_LEVEL, 3733 WMI_10_4_PDEV_PARAM_ANI_CCK_LEVEL, 3734 WMI_10_4_PDEV_PARAM_DYNTXCHAIN, 3735 WMI_10_4_PDEV_PARAM_PROXY_STA, 3736 WMI_10_4_PDEV_PARAM_IDLE_PS_CONFIG, 3737 WMI_10_4_PDEV_PARAM_POWER_GATING_SLEEP, 3738 WMI_10_4_PDEV_PARAM_AGGR_BURST, 3739 WMI_10_4_PDEV_PARAM_RX_DECAP_MODE, 3740 WMI_10_4_PDEV_PARAM_FAST_CHANNEL_RESET, 3741 WMI_10_4_PDEV_PARAM_BURST_DUR, 3742 WMI_10_4_PDEV_PARAM_BURST_ENABLE, 3743 WMI_10_4_PDEV_PARAM_SMART_ANTENNA_DEFAULT_ANTENNA, 3744 WMI_10_4_PDEV_PARAM_IGMPMLD_OVERRIDE, 3745 WMI_10_4_PDEV_PARAM_IGMPMLD_TID, 3746 WMI_10_4_PDEV_PARAM_ANTENNA_GAIN, 3747 WMI_10_4_PDEV_PARAM_RX_FILTER, 3748 WMI_10_4_PDEV_SET_MCAST_TO_UCAST_TID, 3749 WMI_10_4_PDEV_PARAM_PROXY_STA_MODE, 3750 WMI_10_4_PDEV_PARAM_SET_MCAST2UCAST_MODE, 3751 WMI_10_4_PDEV_PARAM_SET_MCAST2UCAST_BUFFER, 3752 WMI_10_4_PDEV_PARAM_REMOVE_MCAST2UCAST_BUFFER, 3753 WMI_10_4_PDEV_PEER_STA_PS_STATECHG_ENABLE, 3754 WMI_10_4_PDEV_PARAM_IGMPMLD_AC_OVERRIDE, 3755 WMI_10_4_PDEV_PARAM_BLOCK_INTERBSS, 3756 WMI_10_4_PDEV_PARAM_SET_DISABLE_RESET_CMDID, 3757 WMI_10_4_PDEV_PARAM_SET_MSDU_TTL_CMDID, 3758 WMI_10_4_PDEV_PARAM_SET_PPDU_DURATION_CMDID, 3759 WMI_10_4_PDEV_PARAM_TXBF_SOUND_PERIOD_CMDID, 3760 WMI_10_4_PDEV_PARAM_SET_PROMISC_MODE_CMDID, 3761 WMI_10_4_PDEV_PARAM_SET_BURST_MODE_CMDID, 3762 WMI_10_4_PDEV_PARAM_EN_STATS, 3763 WMI_10_4_PDEV_PARAM_MU_GROUP_POLICY, 3764 WMI_10_4_PDEV_PARAM_NOISE_DETECTION, 3765 WMI_10_4_PDEV_PARAM_NOISE_THRESHOLD, 3766 WMI_10_4_PDEV_PARAM_DPD_ENABLE, 3767 WMI_10_4_PDEV_PARAM_SET_MCAST_BCAST_ECHO, 3768 WMI_10_4_PDEV_PARAM_ATF_STRICT_SCH, 3769 WMI_10_4_PDEV_PARAM_ATF_SCHED_DURATION, 3770 WMI_10_4_PDEV_PARAM_ANT_PLZN, 3771 WMI_10_4_PDEV_PARAM_MGMT_RETRY_LIMIT, 3772 WMI_10_4_PDEV_PARAM_SENSITIVITY_LEVEL, 3773 WMI_10_4_PDEV_PARAM_SIGNED_TXPOWER_2G, 3774 WMI_10_4_PDEV_PARAM_SIGNED_TXPOWER_5G, 3775 WMI_10_4_PDEV_PARAM_ENABLE_PER_TID_AMSDU, 3776 WMI_10_4_PDEV_PARAM_ENABLE_PER_TID_AMPDU, 3777 WMI_10_4_PDEV_PARAM_CCA_THRESHOLD, 3778 WMI_10_4_PDEV_PARAM_RTS_FIXED_RATE, 3779 WMI_10_4_PDEV_PARAM_CAL_PERIOD, 3780 WMI_10_4_PDEV_PARAM_PDEV_RESET, 3781 WMI_10_4_PDEV_PARAM_WAPI_MBSSID_OFFSET, 3782 WMI_10_4_PDEV_PARAM_ARP_SRCADDR, 3783 WMI_10_4_PDEV_PARAM_ARP_DSTADDR, 3784 WMI_10_4_PDEV_PARAM_TXPOWER_DECR_DB, 3785 WMI_10_4_PDEV_PARAM_RX_BATCHMODE, 3786 WMI_10_4_PDEV_PARAM_PACKET_AGGR_DELAY, 3787 WMI_10_4_PDEV_PARAM_ATF_OBSS_NOISE_SCH, 3788 WMI_10_4_PDEV_PARAM_ATF_OBSS_NOISE_SCALING_FACTOR, 3789 WMI_10_4_PDEV_PARAM_CUST_TXPOWER_SCALE, 3790 WMI_10_4_PDEV_PARAM_ATF_DYNAMIC_ENABLE, 3791 WMI_10_4_PDEV_PARAM_ATF_SSID_GROUP_POLICY, 3792 WMI_10_4_PDEV_PARAM_ENABLE_BTCOEX, 3793 }; 3794 3795 struct wmi_pdev_set_param_cmd { 3796 __le32 param_id; 3797 __le32 param_value; 3798 } __packed; 3799 3800 /* valid period is 1 ~ 60000ms, unit in millisecond */ 3801 #define WMI_PDEV_PARAM_CAL_PERIOD_MAX 60000 3802 3803 struct wmi_pdev_get_tpc_config_cmd { 3804 /* parameter */ 3805 __le32 param; 3806 } __packed; 3807 3808 #define WMI_TPC_CONFIG_PARAM 1 3809 #define WMI_TPC_RATE_MAX 160 3810 #define WMI_TPC_TX_N_CHAIN 4 3811 #define WMI_TPC_PREAM_TABLE_MAX 10 3812 #define WMI_TPC_FLAG 3 3813 #define WMI_TPC_BUF_SIZE 10 3814 3815 enum wmi_tpc_table_type { 3816 WMI_TPC_TABLE_TYPE_CDD = 0, 3817 WMI_TPC_TABLE_TYPE_STBC = 1, 3818 WMI_TPC_TABLE_TYPE_TXBF = 2, 3819 }; 3820 3821 enum wmi_tpc_config_event_flag { 3822 WMI_TPC_CONFIG_EVENT_FLAG_TABLE_CDD = 0x1, 3823 WMI_TPC_CONFIG_EVENT_FLAG_TABLE_STBC = 0x2, 3824 WMI_TPC_CONFIG_EVENT_FLAG_TABLE_TXBF = 0x4, 3825 }; 3826 3827 struct wmi_pdev_tpc_config_event { 3828 __le32 reg_domain; 3829 __le32 chan_freq; 3830 __le32 phy_mode; 3831 __le32 twice_antenna_reduction; 3832 __le32 twice_max_rd_power; 3833 a_sle32 twice_antenna_gain; 3834 __le32 power_limit; 3835 __le32 rate_max; 3836 __le32 num_tx_chain; 3837 __le32 ctl; 3838 __le32 flags; 3839 s8 max_reg_allow_pow[WMI_TPC_TX_N_CHAIN]; 3840 s8 max_reg_allow_pow_agcdd[WMI_TPC_TX_N_CHAIN][WMI_TPC_TX_N_CHAIN]; 3841 s8 max_reg_allow_pow_agstbc[WMI_TPC_TX_N_CHAIN][WMI_TPC_TX_N_CHAIN]; 3842 s8 max_reg_allow_pow_agtxbf[WMI_TPC_TX_N_CHAIN][WMI_TPC_TX_N_CHAIN]; 3843 u8 rates_array[WMI_TPC_RATE_MAX]; 3844 } __packed; 3845 3846 /* Transmit power scale factor. */ 3847 enum wmi_tp_scale { 3848 WMI_TP_SCALE_MAX = 0, /* no scaling (default) */ 3849 WMI_TP_SCALE_50 = 1, /* 50% of max (-3 dBm) */ 3850 WMI_TP_SCALE_25 = 2, /* 25% of max (-6 dBm) */ 3851 WMI_TP_SCALE_12 = 3, /* 12% of max (-9 dBm) */ 3852 WMI_TP_SCALE_MIN = 4, /* min, but still on */ 3853 WMI_TP_SCALE_SIZE = 5, /* max num of enum */ 3854 }; 3855 3856 struct wmi_pdev_chanlist_update_event { 3857 /* number of channels */ 3858 __le32 num_chan; 3859 /* array of channels */ 3860 struct wmi_channel channel_list[1]; 3861 } __packed; 3862 3863 #define WMI_MAX_DEBUG_MESG (sizeof(u32) * 32) 3864 3865 struct wmi_debug_mesg_event { 3866 /* message buffer, NULL terminated */ 3867 char bufp[WMI_MAX_DEBUG_MESG]; 3868 } __packed; 3869 3870 enum { 3871 /* P2P device */ 3872 VDEV_SUBTYPE_P2PDEV = 0, 3873 /* P2P client */ 3874 VDEV_SUBTYPE_P2PCLI, 3875 /* P2P GO */ 3876 VDEV_SUBTYPE_P2PGO, 3877 /* BT3.0 HS */ 3878 VDEV_SUBTYPE_BT, 3879 }; 3880 3881 struct wmi_pdev_set_channel_cmd { 3882 /* idnore power , only use flags , mode and freq */ 3883 struct wmi_channel chan; 3884 } __packed; 3885 3886 struct wmi_pdev_pktlog_enable_cmd { 3887 __le32 ev_bitmap; 3888 } __packed; 3889 3890 /* Customize the DSCP (bit) to TID (0-7) mapping for QOS */ 3891 #define WMI_DSCP_MAP_MAX (64) 3892 struct wmi_pdev_set_dscp_tid_map_cmd { 3893 /* map indicating DSCP to TID conversion */ 3894 __le32 dscp_to_tid_map[WMI_DSCP_MAP_MAX]; 3895 } __packed; 3896 3897 enum mcast_bcast_rate_id { 3898 WMI_SET_MCAST_RATE, 3899 WMI_SET_BCAST_RATE 3900 }; 3901 3902 struct mcast_bcast_rate { 3903 enum mcast_bcast_rate_id rate_id; 3904 __le32 rate; 3905 } __packed; 3906 3907 struct wmi_wmm_params { 3908 __le32 cwmin; 3909 __le32 cwmax; 3910 __le32 aifs; 3911 __le32 txop; 3912 __le32 acm; 3913 __le32 no_ack; 3914 } __packed; 3915 3916 struct wmi_pdev_set_wmm_params { 3917 struct wmi_wmm_params ac_be; 3918 struct wmi_wmm_params ac_bk; 3919 struct wmi_wmm_params ac_vi; 3920 struct wmi_wmm_params ac_vo; 3921 } __packed; 3922 3923 struct wmi_wmm_params_arg { 3924 u32 cwmin; 3925 u32 cwmax; 3926 u32 aifs; 3927 u32 txop; 3928 u32 acm; 3929 u32 no_ack; 3930 }; 3931 3932 struct wmi_wmm_params_all_arg { 3933 struct wmi_wmm_params_arg ac_be; 3934 struct wmi_wmm_params_arg ac_bk; 3935 struct wmi_wmm_params_arg ac_vi; 3936 struct wmi_wmm_params_arg ac_vo; 3937 }; 3938 3939 struct wmi_pdev_stats_tx { 3940 /* Num HTT cookies queued to dispatch list */ 3941 __le32 comp_queued; 3942 3943 /* Num HTT cookies dispatched */ 3944 __le32 comp_delivered; 3945 3946 /* Num MSDU queued to WAL */ 3947 __le32 msdu_enqued; 3948 3949 /* Num MPDU queue to WAL */ 3950 __le32 mpdu_enqued; 3951 3952 /* Num MSDUs dropped by WMM limit */ 3953 __le32 wmm_drop; 3954 3955 /* Num Local frames queued */ 3956 __le32 local_enqued; 3957 3958 /* Num Local frames done */ 3959 __le32 local_freed; 3960 3961 /* Num queued to HW */ 3962 __le32 hw_queued; 3963 3964 /* Num PPDU reaped from HW */ 3965 __le32 hw_reaped; 3966 3967 /* Num underruns */ 3968 __le32 underrun; 3969 3970 /* Num PPDUs cleaned up in TX abort */ 3971 __le32 tx_abort; 3972 3973 /* Num MPDUs requed by SW */ 3974 __le32 mpdus_requed; 3975 3976 /* excessive retries */ 3977 __le32 tx_ko; 3978 3979 /* data hw rate code */ 3980 __le32 data_rc; 3981 3982 /* Scheduler self triggers */ 3983 __le32 self_triggers; 3984 3985 /* frames dropped due to excessive sw retries */ 3986 __le32 sw_retry_failure; 3987 3988 /* illegal rate phy errors */ 3989 __le32 illgl_rate_phy_err; 3990 3991 /* wal pdev continuous xretry */ 3992 __le32 pdev_cont_xretry; 3993 3994 /* wal pdev continous xretry */ 3995 __le32 pdev_tx_timeout; 3996 3997 /* wal pdev resets */ 3998 __le32 pdev_resets; 3999 4000 /* frames dropped due to non-availability of stateless TIDs */ 4001 __le32 stateless_tid_alloc_failure; 4002 4003 __le32 phy_underrun; 4004 4005 /* MPDU is more than txop limit */ 4006 __le32 txop_ovf; 4007 } __packed; 4008 4009 struct wmi_10_4_pdev_stats_tx { 4010 /* Num HTT cookies queued to dispatch list */ 4011 __le32 comp_queued; 4012 4013 /* Num HTT cookies dispatched */ 4014 __le32 comp_delivered; 4015 4016 /* Num MSDU queued to WAL */ 4017 __le32 msdu_enqued; 4018 4019 /* Num MPDU queue to WAL */ 4020 __le32 mpdu_enqued; 4021 4022 /* Num MSDUs dropped by WMM limit */ 4023 __le32 wmm_drop; 4024 4025 /* Num Local frames queued */ 4026 __le32 local_enqued; 4027 4028 /* Num Local frames done */ 4029 __le32 local_freed; 4030 4031 /* Num queued to HW */ 4032 __le32 hw_queued; 4033 4034 /* Num PPDU reaped from HW */ 4035 __le32 hw_reaped; 4036 4037 /* Num underruns */ 4038 __le32 underrun; 4039 4040 /* HW Paused. */ 4041 __le32 hw_paused; 4042 4043 /* Num PPDUs cleaned up in TX abort */ 4044 __le32 tx_abort; 4045 4046 /* Num MPDUs requed by SW */ 4047 __le32 mpdus_requed; 4048 4049 /* excessive retries */ 4050 __le32 tx_ko; 4051 4052 /* data hw rate code */ 4053 __le32 data_rc; 4054 4055 /* Scheduler self triggers */ 4056 __le32 self_triggers; 4057 4058 /* frames dropped due to excessive sw retries */ 4059 __le32 sw_retry_failure; 4060 4061 /* illegal rate phy errors */ 4062 __le32 illgl_rate_phy_err; 4063 4064 /* wal pdev continuous xretry */ 4065 __le32 pdev_cont_xretry; 4066 4067 /* wal pdev tx timeouts */ 4068 __le32 pdev_tx_timeout; 4069 4070 /* wal pdev resets */ 4071 __le32 pdev_resets; 4072 4073 /* frames dropped due to non-availability of stateless TIDs */ 4074 __le32 stateless_tid_alloc_failure; 4075 4076 __le32 phy_underrun; 4077 4078 /* MPDU is more than txop limit */ 4079 __le32 txop_ovf; 4080 4081 /* Number of Sequences posted */ 4082 __le32 seq_posted; 4083 4084 /* Number of Sequences failed queueing */ 4085 __le32 seq_failed_queueing; 4086 4087 /* Number of Sequences completed */ 4088 __le32 seq_completed; 4089 4090 /* Number of Sequences restarted */ 4091 __le32 seq_restarted; 4092 4093 /* Number of MU Sequences posted */ 4094 __le32 mu_seq_posted; 4095 4096 /* Num MPDUs flushed by SW, HWPAUSED,SW TXABORT(Reset,channel change) */ 4097 __le32 mpdus_sw_flush; 4098 4099 /* Num MPDUs filtered by HW, all filter condition (TTL expired) */ 4100 __le32 mpdus_hw_filter; 4101 4102 /* Num MPDUs truncated by PDG 4103 * (TXOP, TBTT, PPDU_duration based on rate, dyn_bw) 4104 */ 4105 __le32 mpdus_truncated; 4106 4107 /* Num MPDUs that was tried but didn't receive ACK or BA */ 4108 __le32 mpdus_ack_failed; 4109 4110 /* Num MPDUs that was dropped due to expiry. */ 4111 __le32 mpdus_expired; 4112 } __packed; 4113 4114 struct wmi_pdev_stats_rx { 4115 /* Cnts any change in ring routing mid-ppdu */ 4116 __le32 mid_ppdu_route_change; 4117 4118 /* Total number of statuses processed */ 4119 __le32 status_rcvd; 4120 4121 /* Extra frags on rings 0-3 */ 4122 __le32 r0_frags; 4123 __le32 r1_frags; 4124 __le32 r2_frags; 4125 __le32 r3_frags; 4126 4127 /* MSDUs / MPDUs delivered to HTT */ 4128 __le32 htt_msdus; 4129 __le32 htt_mpdus; 4130 4131 /* MSDUs / MPDUs delivered to local stack */ 4132 __le32 loc_msdus; 4133 __le32 loc_mpdus; 4134 4135 /* AMSDUs that have more MSDUs than the status ring size */ 4136 __le32 oversize_amsdu; 4137 4138 /* Number of PHY errors */ 4139 __le32 phy_errs; 4140 4141 /* Number of PHY errors drops */ 4142 __le32 phy_err_drop; 4143 4144 /* Number of mpdu errors - FCS, MIC, ENC etc. */ 4145 __le32 mpdu_errs; 4146 } __packed; 4147 4148 struct wmi_pdev_stats_peer { 4149 /* REMOVE THIS ONCE REAL PEER STAT COUNTERS ARE ADDED */ 4150 __le32 dummy; 4151 } __packed; 4152 4153 enum wmi_stats_id { 4154 WMI_STAT_PEER = BIT(0), 4155 WMI_STAT_AP = BIT(1), 4156 WMI_STAT_PDEV = BIT(2), 4157 WMI_STAT_VDEV = BIT(3), 4158 WMI_STAT_BCNFLT = BIT(4), 4159 WMI_STAT_VDEV_RATE = BIT(5), 4160 }; 4161 4162 enum wmi_10_4_stats_id { 4163 WMI_10_4_STAT_PEER = BIT(0), 4164 WMI_10_4_STAT_AP = BIT(1), 4165 WMI_10_4_STAT_INST = BIT(2), 4166 WMI_10_4_STAT_PEER_EXTD = BIT(3), 4167 }; 4168 4169 struct wlan_inst_rssi_args { 4170 __le16 cfg_retry_count; 4171 __le16 retry_count; 4172 }; 4173 4174 struct wmi_request_stats_cmd { 4175 __le32 stats_id; 4176 4177 __le32 vdev_id; 4178 4179 /* peer MAC address */ 4180 struct wmi_mac_addr peer_macaddr; 4181 4182 /* Instantaneous RSSI arguments */ 4183 struct wlan_inst_rssi_args inst_rssi_args; 4184 } __packed; 4185 4186 /* Suspend option */ 4187 enum { 4188 /* suspend */ 4189 WMI_PDEV_SUSPEND, 4190 4191 /* suspend and disable all interrupts */ 4192 WMI_PDEV_SUSPEND_AND_DISABLE_INTR, 4193 }; 4194 4195 struct wmi_pdev_suspend_cmd { 4196 /* suspend option sent to target */ 4197 __le32 suspend_opt; 4198 } __packed; 4199 4200 struct wmi_stats_event { 4201 __le32 stats_id; /* WMI_STAT_ */ 4202 /* 4203 * number of pdev stats event structures 4204 * (wmi_pdev_stats) 0 or 1 4205 */ 4206 __le32 num_pdev_stats; 4207 /* 4208 * number of vdev stats event structures 4209 * (wmi_vdev_stats) 0 or max vdevs 4210 */ 4211 __le32 num_vdev_stats; 4212 /* 4213 * number of peer stats event structures 4214 * (wmi_peer_stats) 0 or max peers 4215 */ 4216 __le32 num_peer_stats; 4217 __le32 num_bcnflt_stats; 4218 /* 4219 * followed by 4220 * num_pdev_stats * size of(struct wmi_pdev_stats) 4221 * num_vdev_stats * size of(struct wmi_vdev_stats) 4222 * num_peer_stats * size of(struct wmi_peer_stats) 4223 * 4224 * By having a zero sized array, the pointer to data area 4225 * becomes available without increasing the struct size 4226 */ 4227 u8 data[0]; 4228 } __packed; 4229 4230 struct wmi_10_2_stats_event { 4231 __le32 stats_id; /* %WMI_REQUEST_ */ 4232 __le32 num_pdev_stats; 4233 __le32 num_pdev_ext_stats; 4234 __le32 num_vdev_stats; 4235 __le32 num_peer_stats; 4236 __le32 num_bcnflt_stats; 4237 u8 data[0]; 4238 } __packed; 4239 4240 /* 4241 * PDEV statistics 4242 * TODO: add all PDEV stats here 4243 */ 4244 struct wmi_pdev_stats_base { 4245 __le32 chan_nf; 4246 __le32 tx_frame_count; /* Cycles spent transmitting frames */ 4247 __le32 rx_frame_count; /* Cycles spent receiving frames */ 4248 __le32 rx_clear_count; /* Total channel busy time, evidently */ 4249 __le32 cycle_count; /* Total on-channel time */ 4250 __le32 phy_err_count; 4251 __le32 chan_tx_pwr; 4252 } __packed; 4253 4254 struct wmi_pdev_stats { 4255 struct wmi_pdev_stats_base base; 4256 struct wmi_pdev_stats_tx tx; 4257 struct wmi_pdev_stats_rx rx; 4258 struct wmi_pdev_stats_peer peer; 4259 } __packed; 4260 4261 struct wmi_pdev_stats_extra { 4262 __le32 ack_rx_bad; 4263 __le32 rts_bad; 4264 __le32 rts_good; 4265 __le32 fcs_bad; 4266 __le32 no_beacons; 4267 __le32 mib_int_count; 4268 } __packed; 4269 4270 struct wmi_10x_pdev_stats { 4271 struct wmi_pdev_stats_base base; 4272 struct wmi_pdev_stats_tx tx; 4273 struct wmi_pdev_stats_rx rx; 4274 struct wmi_pdev_stats_peer peer; 4275 struct wmi_pdev_stats_extra extra; 4276 } __packed; 4277 4278 struct wmi_pdev_stats_mem { 4279 __le32 dram_free; 4280 __le32 iram_free; 4281 } __packed; 4282 4283 struct wmi_10_2_pdev_stats { 4284 struct wmi_pdev_stats_base base; 4285 struct wmi_pdev_stats_tx tx; 4286 __le32 mc_drop; 4287 struct wmi_pdev_stats_rx rx; 4288 __le32 pdev_rx_timeout; 4289 struct wmi_pdev_stats_mem mem; 4290 struct wmi_pdev_stats_peer peer; 4291 struct wmi_pdev_stats_extra extra; 4292 } __packed; 4293 4294 struct wmi_10_4_pdev_stats { 4295 struct wmi_pdev_stats_base base; 4296 struct wmi_10_4_pdev_stats_tx tx; 4297 struct wmi_pdev_stats_rx rx; 4298 __le32 rx_ovfl_errs; 4299 struct wmi_pdev_stats_mem mem; 4300 __le32 sram_free_size; 4301 struct wmi_pdev_stats_extra extra; 4302 } __packed; 4303 4304 /* 4305 * VDEV statistics 4306 * TODO: add all VDEV stats here 4307 */ 4308 struct wmi_vdev_stats { 4309 __le32 vdev_id; 4310 } __packed; 4311 4312 /* 4313 * peer statistics. 4314 * TODO: add more stats 4315 */ 4316 struct wmi_peer_stats { 4317 struct wmi_mac_addr peer_macaddr; 4318 __le32 peer_rssi; 4319 __le32 peer_tx_rate; 4320 } __packed; 4321 4322 struct wmi_10x_peer_stats { 4323 struct wmi_peer_stats old; 4324 __le32 peer_rx_rate; 4325 } __packed; 4326 4327 struct wmi_10_2_peer_stats { 4328 struct wmi_peer_stats old; 4329 __le32 peer_rx_rate; 4330 __le32 current_per; 4331 __le32 retries; 4332 __le32 tx_rate_count; 4333 __le32 max_4ms_frame_len; 4334 __le32 total_sub_frames; 4335 __le32 tx_bytes; 4336 __le32 num_pkt_loss_overflow[4]; 4337 __le32 num_pkt_loss_excess_retry[4]; 4338 } __packed; 4339 4340 struct wmi_10_2_4_peer_stats { 4341 struct wmi_10_2_peer_stats common; 4342 __le32 peer_rssi_changed; 4343 } __packed; 4344 4345 struct wmi_10_2_4_ext_peer_stats { 4346 struct wmi_10_2_peer_stats common; 4347 __le32 peer_rssi_changed; 4348 __le32 rx_duration; 4349 } __packed; 4350 4351 struct wmi_10_4_peer_stats { 4352 struct wmi_mac_addr peer_macaddr; 4353 __le32 peer_rssi; 4354 __le32 peer_rssi_seq_num; 4355 __le32 peer_tx_rate; 4356 __le32 peer_rx_rate; 4357 __le32 current_per; 4358 __le32 retries; 4359 __le32 tx_rate_count; 4360 __le32 max_4ms_frame_len; 4361 __le32 total_sub_frames; 4362 __le32 tx_bytes; 4363 __le32 num_pkt_loss_overflow[4]; 4364 __le32 num_pkt_loss_excess_retry[4]; 4365 __le32 peer_rssi_changed; 4366 } __packed; 4367 4368 struct wmi_10_4_peer_extd_stats { 4369 struct wmi_mac_addr peer_macaddr; 4370 __le32 inactive_time; 4371 __le32 peer_chain_rssi; 4372 __le32 rx_duration; 4373 __le32 reserved[10]; 4374 } __packed; 4375 4376 struct wmi_10_4_bss_bcn_stats { 4377 __le32 vdev_id; 4378 __le32 bss_bcns_dropped; 4379 __le32 bss_bcn_delivered; 4380 } __packed; 4381 4382 struct wmi_10_4_bss_bcn_filter_stats { 4383 __le32 bcns_dropped; 4384 __le32 bcns_delivered; 4385 __le32 active_filters; 4386 struct wmi_10_4_bss_bcn_stats bss_stats; 4387 } __packed; 4388 4389 struct wmi_10_2_pdev_ext_stats { 4390 __le32 rx_rssi_comb; 4391 __le32 rx_rssi[4]; 4392 __le32 rx_mcs[10]; 4393 __le32 tx_mcs[10]; 4394 __le32 ack_rssi; 4395 } __packed; 4396 4397 struct wmi_vdev_create_cmd { 4398 __le32 vdev_id; 4399 __le32 vdev_type; 4400 __le32 vdev_subtype; 4401 struct wmi_mac_addr vdev_macaddr; 4402 } __packed; 4403 4404 enum wmi_vdev_type { 4405 WMI_VDEV_TYPE_AP = 1, 4406 WMI_VDEV_TYPE_STA = 2, 4407 WMI_VDEV_TYPE_IBSS = 3, 4408 WMI_VDEV_TYPE_MONITOR = 4, 4409 }; 4410 4411 enum wmi_vdev_subtype { 4412 WMI_VDEV_SUBTYPE_NONE, 4413 WMI_VDEV_SUBTYPE_P2P_DEVICE, 4414 WMI_VDEV_SUBTYPE_P2P_CLIENT, 4415 WMI_VDEV_SUBTYPE_P2P_GO, 4416 WMI_VDEV_SUBTYPE_PROXY_STA, 4417 WMI_VDEV_SUBTYPE_MESH_11S, 4418 WMI_VDEV_SUBTYPE_MESH_NON_11S, 4419 }; 4420 4421 enum wmi_vdev_subtype_legacy { 4422 WMI_VDEV_SUBTYPE_LEGACY_NONE = 0, 4423 WMI_VDEV_SUBTYPE_LEGACY_P2P_DEV = 1, 4424 WMI_VDEV_SUBTYPE_LEGACY_P2P_CLI = 2, 4425 WMI_VDEV_SUBTYPE_LEGACY_P2P_GO = 3, 4426 WMI_VDEV_SUBTYPE_LEGACY_PROXY_STA = 4, 4427 }; 4428 4429 enum wmi_vdev_subtype_10_2_4 { 4430 WMI_VDEV_SUBTYPE_10_2_4_NONE = 0, 4431 WMI_VDEV_SUBTYPE_10_2_4_P2P_DEV = 1, 4432 WMI_VDEV_SUBTYPE_10_2_4_P2P_CLI = 2, 4433 WMI_VDEV_SUBTYPE_10_2_4_P2P_GO = 3, 4434 WMI_VDEV_SUBTYPE_10_2_4_PROXY_STA = 4, 4435 WMI_VDEV_SUBTYPE_10_2_4_MESH_11S = 5, 4436 }; 4437 4438 enum wmi_vdev_subtype_10_4 { 4439 WMI_VDEV_SUBTYPE_10_4_NONE = 0, 4440 WMI_VDEV_SUBTYPE_10_4_P2P_DEV = 1, 4441 WMI_VDEV_SUBTYPE_10_4_P2P_CLI = 2, 4442 WMI_VDEV_SUBTYPE_10_4_P2P_GO = 3, 4443 WMI_VDEV_SUBTYPE_10_4_PROXY_STA = 4, 4444 WMI_VDEV_SUBTYPE_10_4_MESH_NON_11S = 5, 4445 WMI_VDEV_SUBTYPE_10_4_MESH_11S = 6, 4446 }; 4447 4448 /* values for vdev_subtype */ 4449 4450 /* values for vdev_start_request flags */ 4451 /* 4452 * Indicates that AP VDEV uses hidden ssid. only valid for 4453 * AP/GO 4454 */ 4455 #define WMI_VDEV_START_HIDDEN_SSID (1 << 0) 4456 /* 4457 * Indicates if robust management frame/management frame 4458 * protection is enabled. For GO/AP vdevs, it indicates that 4459 * it may support station/client associations with RMF enabled. 4460 * For STA/client vdevs, it indicates that sta will 4461 * associate with AP with RMF enabled. 4462 */ 4463 #define WMI_VDEV_START_PMF_ENABLED (1 << 1) 4464 4465 struct wmi_p2p_noa_descriptor { 4466 __le32 type_count; /* 255: continuous schedule, 0: reserved */ 4467 __le32 duration; /* Absent period duration in micro seconds */ 4468 __le32 interval; /* Absent period interval in micro seconds */ 4469 __le32 start_time; /* 32 bit tsf time when in starts */ 4470 } __packed; 4471 4472 struct wmi_vdev_start_request_cmd { 4473 /* WMI channel */ 4474 struct wmi_channel chan; 4475 /* unique id identifying the VDEV, generated by the caller */ 4476 __le32 vdev_id; 4477 /* requestor id identifying the caller module */ 4478 __le32 requestor_id; 4479 /* beacon interval from received beacon */ 4480 __le32 beacon_interval; 4481 /* DTIM Period from the received beacon */ 4482 __le32 dtim_period; 4483 /* Flags */ 4484 __le32 flags; 4485 /* ssid field. Only valid for AP/GO/IBSS/BTAmp VDEV type. */ 4486 struct wmi_ssid ssid; 4487 /* beacon/probe response xmit rate. Applicable for SoftAP. */ 4488 __le32 bcn_tx_rate; 4489 /* beacon/probe response xmit power. Applicable for SoftAP. */ 4490 __le32 bcn_tx_power; 4491 /* number of p2p NOA descriptor(s) from scan entry */ 4492 __le32 num_noa_descriptors; 4493 /* 4494 * Disable H/W ack. This used by WMI_VDEV_RESTART_REQUEST_CMDID. 4495 * During CAC, Our HW shouldn't ack ditected frames 4496 */ 4497 __le32 disable_hw_ack; 4498 /* actual p2p NOA descriptor from scan entry */ 4499 struct wmi_p2p_noa_descriptor noa_descriptors[2]; 4500 } __packed; 4501 4502 struct wmi_vdev_restart_request_cmd { 4503 struct wmi_vdev_start_request_cmd vdev_start_request_cmd; 4504 } __packed; 4505 4506 struct wmi_vdev_start_request_arg { 4507 u32 vdev_id; 4508 struct wmi_channel_arg channel; 4509 u32 bcn_intval; 4510 u32 dtim_period; 4511 u8 *ssid; 4512 u32 ssid_len; 4513 u32 bcn_tx_rate; 4514 u32 bcn_tx_power; 4515 bool disable_hw_ack; 4516 bool hidden_ssid; 4517 bool pmf_enabled; 4518 }; 4519 4520 struct wmi_vdev_delete_cmd { 4521 /* unique id identifying the VDEV, generated by the caller */ 4522 __le32 vdev_id; 4523 } __packed; 4524 4525 struct wmi_vdev_up_cmd { 4526 __le32 vdev_id; 4527 __le32 vdev_assoc_id; 4528 struct wmi_mac_addr vdev_bssid; 4529 } __packed; 4530 4531 struct wmi_vdev_stop_cmd { 4532 __le32 vdev_id; 4533 } __packed; 4534 4535 struct wmi_vdev_down_cmd { 4536 __le32 vdev_id; 4537 } __packed; 4538 4539 struct wmi_vdev_standby_response_cmd { 4540 /* unique id identifying the VDEV, generated by the caller */ 4541 __le32 vdev_id; 4542 } __packed; 4543 4544 struct wmi_vdev_resume_response_cmd { 4545 /* unique id identifying the VDEV, generated by the caller */ 4546 __le32 vdev_id; 4547 } __packed; 4548 4549 struct wmi_vdev_set_param_cmd { 4550 __le32 vdev_id; 4551 __le32 param_id; 4552 __le32 param_value; 4553 } __packed; 4554 4555 #define WMI_MAX_KEY_INDEX 3 4556 #define WMI_MAX_KEY_LEN 32 4557 4558 #define WMI_KEY_PAIRWISE 0x00 4559 #define WMI_KEY_GROUP 0x01 4560 #define WMI_KEY_TX_USAGE 0x02 /* default tx key - static wep */ 4561 4562 struct wmi_key_seq_counter { 4563 __le32 key_seq_counter_l; 4564 __le32 key_seq_counter_h; 4565 } __packed; 4566 4567 #define WMI_CIPHER_NONE 0x0 /* clear key */ 4568 #define WMI_CIPHER_WEP 0x1 4569 #define WMI_CIPHER_TKIP 0x2 4570 #define WMI_CIPHER_AES_OCB 0x3 4571 #define WMI_CIPHER_AES_CCM 0x4 4572 #define WMI_CIPHER_WAPI 0x5 4573 #define WMI_CIPHER_CKIP 0x6 4574 #define WMI_CIPHER_AES_CMAC 0x7 4575 4576 struct wmi_vdev_install_key_cmd { 4577 __le32 vdev_id; 4578 struct wmi_mac_addr peer_macaddr; 4579 __le32 key_idx; 4580 __le32 key_flags; 4581 __le32 key_cipher; /* %WMI_CIPHER_ */ 4582 struct wmi_key_seq_counter key_rsc_counter; 4583 struct wmi_key_seq_counter key_global_rsc_counter; 4584 struct wmi_key_seq_counter key_tsc_counter; 4585 u8 wpi_key_rsc_counter[16]; 4586 u8 wpi_key_tsc_counter[16]; 4587 __le32 key_len; 4588 __le32 key_txmic_len; 4589 __le32 key_rxmic_len; 4590 4591 /* contains key followed by tx mic followed by rx mic */ 4592 u8 key_data[0]; 4593 } __packed; 4594 4595 struct wmi_vdev_install_key_arg { 4596 u32 vdev_id; 4597 const u8 *macaddr; 4598 u32 key_idx; 4599 u32 key_flags; 4600 u32 key_cipher; 4601 u32 key_len; 4602 u32 key_txmic_len; 4603 u32 key_rxmic_len; 4604 const void *key_data; 4605 }; 4606 4607 /* 4608 * vdev fixed rate format: 4609 * - preamble - b7:b6 - see WMI_RATE_PREMABLE_ 4610 * - nss - b5:b4 - ss number (0 mean 1ss) 4611 * - rate_mcs - b3:b0 - as below 4612 * CCK: 0 - 11Mbps, 1 - 5,5Mbps, 2 - 2Mbps, 3 - 1Mbps, 4613 * 4 - 11Mbps (s), 5 - 5,5Mbps (s), 6 - 2Mbps (s) 4614 * OFDM: 0 - 48Mbps, 1 - 24Mbps, 2 - 12Mbps, 3 - 6Mbps, 4615 * 4 - 54Mbps, 5 - 36Mbps, 6 - 18Mbps, 7 - 9Mbps 4616 * HT/VHT: MCS index 4617 */ 4618 4619 /* Preamble types to be used with VDEV fixed rate configuration */ 4620 enum wmi_rate_preamble { 4621 WMI_RATE_PREAMBLE_OFDM, 4622 WMI_RATE_PREAMBLE_CCK, 4623 WMI_RATE_PREAMBLE_HT, 4624 WMI_RATE_PREAMBLE_VHT, 4625 }; 4626 4627 #define ATH10K_HW_NSS(rate) (1 + (((rate) >> 4) & 0x3)) 4628 #define ATH10K_HW_PREAMBLE(rate) (((rate) >> 6) & 0x3) 4629 #define ATH10K_HW_MCS_RATE(rate) ((rate) & 0xf) 4630 #define ATH10K_HW_LEGACY_RATE(rate) ((rate) & 0x3f) 4631 #define ATH10K_HW_BW(flags) (((flags) >> 3) & 0x3) 4632 #define ATH10K_HW_GI(flags) (((flags) >> 5) & 0x1) 4633 #define ATH10K_HW_RATECODE(rate, nss, preamble) \ 4634 (((preamble) << 6) | ((nss) << 4) | (rate)) 4635 4636 #define VHT_MCS_NUM 10 4637 #define VHT_BW_NUM 4 4638 #define VHT_NSS_NUM 4 4639 4640 /* Value to disable fixed rate setting */ 4641 #define WMI_FIXED_RATE_NONE (0xff) 4642 4643 struct wmi_vdev_param_map { 4644 u32 rts_threshold; 4645 u32 fragmentation_threshold; 4646 u32 beacon_interval; 4647 u32 listen_interval; 4648 u32 multicast_rate; 4649 u32 mgmt_tx_rate; 4650 u32 slot_time; 4651 u32 preamble; 4652 u32 swba_time; 4653 u32 wmi_vdev_stats_update_period; 4654 u32 wmi_vdev_pwrsave_ageout_time; 4655 u32 wmi_vdev_host_swba_interval; 4656 u32 dtim_period; 4657 u32 wmi_vdev_oc_scheduler_air_time_limit; 4658 u32 wds; 4659 u32 atim_window; 4660 u32 bmiss_count_max; 4661 u32 bmiss_first_bcnt; 4662 u32 bmiss_final_bcnt; 4663 u32 feature_wmm; 4664 u32 chwidth; 4665 u32 chextoffset; 4666 u32 disable_htprotection; 4667 u32 sta_quickkickout; 4668 u32 mgmt_rate; 4669 u32 protection_mode; 4670 u32 fixed_rate; 4671 u32 sgi; 4672 u32 ldpc; 4673 u32 tx_stbc; 4674 u32 rx_stbc; 4675 u32 intra_bss_fwd; 4676 u32 def_keyid; 4677 u32 nss; 4678 u32 bcast_data_rate; 4679 u32 mcast_data_rate; 4680 u32 mcast_indicate; 4681 u32 dhcp_indicate; 4682 u32 unknown_dest_indicate; 4683 u32 ap_keepalive_min_idle_inactive_time_secs; 4684 u32 ap_keepalive_max_idle_inactive_time_secs; 4685 u32 ap_keepalive_max_unresponsive_time_secs; 4686 u32 ap_enable_nawds; 4687 u32 mcast2ucast_set; 4688 u32 enable_rtscts; 4689 u32 txbf; 4690 u32 packet_powersave; 4691 u32 drop_unencry; 4692 u32 tx_encap_type; 4693 u32 ap_detect_out_of_sync_sleeping_sta_time_secs; 4694 u32 rc_num_retries; 4695 u32 cabq_maxdur; 4696 u32 mfptest_set; 4697 u32 rts_fixed_rate; 4698 u32 vht_sgimask; 4699 u32 vht80_ratemask; 4700 u32 early_rx_adjust_enable; 4701 u32 early_rx_tgt_bmiss_num; 4702 u32 early_rx_bmiss_sample_cycle; 4703 u32 early_rx_slop_step; 4704 u32 early_rx_init_slop; 4705 u32 early_rx_adjust_pause; 4706 u32 proxy_sta; 4707 u32 meru_vc; 4708 u32 rx_decap_type; 4709 u32 bw_nss_ratemask; 4710 u32 inc_tsf; 4711 u32 dec_tsf; 4712 }; 4713 4714 #define WMI_VDEV_PARAM_UNSUPPORTED 0 4715 4716 /* the definition of different VDEV parameters */ 4717 enum wmi_vdev_param { 4718 /* RTS Threshold */ 4719 WMI_VDEV_PARAM_RTS_THRESHOLD = 0x1, 4720 /* Fragmentation threshold */ 4721 WMI_VDEV_PARAM_FRAGMENTATION_THRESHOLD, 4722 /* beacon interval in TUs */ 4723 WMI_VDEV_PARAM_BEACON_INTERVAL, 4724 /* Listen interval in TUs */ 4725 WMI_VDEV_PARAM_LISTEN_INTERVAL, 4726 /* multicast rate in Mbps */ 4727 WMI_VDEV_PARAM_MULTICAST_RATE, 4728 /* management frame rate in Mbps */ 4729 WMI_VDEV_PARAM_MGMT_TX_RATE, 4730 /* slot time (long vs short) */ 4731 WMI_VDEV_PARAM_SLOT_TIME, 4732 /* preamble (long vs short) */ 4733 WMI_VDEV_PARAM_PREAMBLE, 4734 /* SWBA time (time before tbtt in msec) */ 4735 WMI_VDEV_PARAM_SWBA_TIME, 4736 /* time period for updating VDEV stats */ 4737 WMI_VDEV_STATS_UPDATE_PERIOD, 4738 /* age out time in msec for frames queued for station in power save */ 4739 WMI_VDEV_PWRSAVE_AGEOUT_TIME, 4740 /* 4741 * Host SWBA interval (time in msec before tbtt for SWBA event 4742 * generation). 4743 */ 4744 WMI_VDEV_HOST_SWBA_INTERVAL, 4745 /* DTIM period (specified in units of num beacon intervals) */ 4746 WMI_VDEV_PARAM_DTIM_PERIOD, 4747 /* 4748 * scheduler air time limit for this VDEV. used by off chan 4749 * scheduler. 4750 */ 4751 WMI_VDEV_OC_SCHEDULER_AIR_TIME_LIMIT, 4752 /* enable/dsiable WDS for this VDEV */ 4753 WMI_VDEV_PARAM_WDS, 4754 /* ATIM Window */ 4755 WMI_VDEV_PARAM_ATIM_WINDOW, 4756 /* BMISS max */ 4757 WMI_VDEV_PARAM_BMISS_COUNT_MAX, 4758 /* BMISS first time */ 4759 WMI_VDEV_PARAM_BMISS_FIRST_BCNT, 4760 /* BMISS final time */ 4761 WMI_VDEV_PARAM_BMISS_FINAL_BCNT, 4762 /* WMM enables/disabled */ 4763 WMI_VDEV_PARAM_FEATURE_WMM, 4764 /* Channel width */ 4765 WMI_VDEV_PARAM_CHWIDTH, 4766 /* Channel Offset */ 4767 WMI_VDEV_PARAM_CHEXTOFFSET, 4768 /* Disable HT Protection */ 4769 WMI_VDEV_PARAM_DISABLE_HTPROTECTION, 4770 /* Quick STA Kickout */ 4771 WMI_VDEV_PARAM_STA_QUICKKICKOUT, 4772 /* Rate to be used with Management frames */ 4773 WMI_VDEV_PARAM_MGMT_RATE, 4774 /* Protection Mode */ 4775 WMI_VDEV_PARAM_PROTECTION_MODE, 4776 /* Fixed rate setting */ 4777 WMI_VDEV_PARAM_FIXED_RATE, 4778 /* Short GI Enable/Disable */ 4779 WMI_VDEV_PARAM_SGI, 4780 /* Enable LDPC */ 4781 WMI_VDEV_PARAM_LDPC, 4782 /* Enable Tx STBC */ 4783 WMI_VDEV_PARAM_TX_STBC, 4784 /* Enable Rx STBC */ 4785 WMI_VDEV_PARAM_RX_STBC, 4786 /* Intra BSS forwarding */ 4787 WMI_VDEV_PARAM_INTRA_BSS_FWD, 4788 /* Setting Default xmit key for Vdev */ 4789 WMI_VDEV_PARAM_DEF_KEYID, 4790 /* NSS width */ 4791 WMI_VDEV_PARAM_NSS, 4792 /* Set the custom rate for the broadcast data frames */ 4793 WMI_VDEV_PARAM_BCAST_DATA_RATE, 4794 /* Set the custom rate (rate-code) for multicast data frames */ 4795 WMI_VDEV_PARAM_MCAST_DATA_RATE, 4796 /* Tx multicast packet indicate Enable/Disable */ 4797 WMI_VDEV_PARAM_MCAST_INDICATE, 4798 /* Tx DHCP packet indicate Enable/Disable */ 4799 WMI_VDEV_PARAM_DHCP_INDICATE, 4800 /* Enable host inspection of Tx unicast packet to unknown destination */ 4801 WMI_VDEV_PARAM_UNKNOWN_DEST_INDICATE, 4802 4803 /* The minimum amount of time AP begins to consider STA inactive */ 4804 WMI_VDEV_PARAM_AP_KEEPALIVE_MIN_IDLE_INACTIVE_TIME_SECS, 4805 4806 /* 4807 * An associated STA is considered inactive when there is no recent 4808 * TX/RX activity and no downlink frames are buffered for it. Once a 4809 * STA exceeds the maximum idle inactive time, the AP will send an 4810 * 802.11 data-null as a keep alive to verify the STA is still 4811 * associated. If the STA does ACK the data-null, or if the data-null 4812 * is buffered and the STA does not retrieve it, the STA will be 4813 * considered unresponsive 4814 * (see WMI_VDEV_AP_KEEPALIVE_MAX_UNRESPONSIVE_TIME_SECS). 4815 */ 4816 WMI_VDEV_PARAM_AP_KEEPALIVE_MAX_IDLE_INACTIVE_TIME_SECS, 4817 4818 /* 4819 * An associated STA is considered unresponsive if there is no recent 4820 * TX/RX activity and downlink frames are buffered for it. Once a STA 4821 * exceeds the maximum unresponsive time, the AP will send a 4822 * WMI_STA_KICKOUT event to the host so the STA can be deleted. 4823 */ 4824 WMI_VDEV_PARAM_AP_KEEPALIVE_MAX_UNRESPONSIVE_TIME_SECS, 4825 4826 /* Enable NAWDS : MCAST INSPECT Enable, NAWDS Flag set */ 4827 WMI_VDEV_PARAM_AP_ENABLE_NAWDS, 4828 /* Enable/Disable RTS-CTS */ 4829 WMI_VDEV_PARAM_ENABLE_RTSCTS, 4830 /* Enable TXBFee/er */ 4831 WMI_VDEV_PARAM_TXBF, 4832 4833 /* Set packet power save */ 4834 WMI_VDEV_PARAM_PACKET_POWERSAVE, 4835 4836 /* 4837 * Drops un-encrypted packets if eceived in an encrypted connection 4838 * otherwise forwards to host. 4839 */ 4840 WMI_VDEV_PARAM_DROP_UNENCRY, 4841 4842 /* 4843 * Set the encapsulation type for frames. 4844 */ 4845 WMI_VDEV_PARAM_TX_ENCAP_TYPE, 4846 }; 4847 4848 /* the definition of different VDEV parameters */ 4849 enum wmi_10x_vdev_param { 4850 /* RTS Threshold */ 4851 WMI_10X_VDEV_PARAM_RTS_THRESHOLD = 0x1, 4852 /* Fragmentation threshold */ 4853 WMI_10X_VDEV_PARAM_FRAGMENTATION_THRESHOLD, 4854 /* beacon interval in TUs */ 4855 WMI_10X_VDEV_PARAM_BEACON_INTERVAL, 4856 /* Listen interval in TUs */ 4857 WMI_10X_VDEV_PARAM_LISTEN_INTERVAL, 4858 /* multicast rate in Mbps */ 4859 WMI_10X_VDEV_PARAM_MULTICAST_RATE, 4860 /* management frame rate in Mbps */ 4861 WMI_10X_VDEV_PARAM_MGMT_TX_RATE, 4862 /* slot time (long vs short) */ 4863 WMI_10X_VDEV_PARAM_SLOT_TIME, 4864 /* preamble (long vs short) */ 4865 WMI_10X_VDEV_PARAM_PREAMBLE, 4866 /* SWBA time (time before tbtt in msec) */ 4867 WMI_10X_VDEV_PARAM_SWBA_TIME, 4868 /* time period for updating VDEV stats */ 4869 WMI_10X_VDEV_STATS_UPDATE_PERIOD, 4870 /* age out time in msec for frames queued for station in power save */ 4871 WMI_10X_VDEV_PWRSAVE_AGEOUT_TIME, 4872 /* 4873 * Host SWBA interval (time in msec before tbtt for SWBA event 4874 * generation). 4875 */ 4876 WMI_10X_VDEV_HOST_SWBA_INTERVAL, 4877 /* DTIM period (specified in units of num beacon intervals) */ 4878 WMI_10X_VDEV_PARAM_DTIM_PERIOD, 4879 /* 4880 * scheduler air time limit for this VDEV. used by off chan 4881 * scheduler. 4882 */ 4883 WMI_10X_VDEV_OC_SCHEDULER_AIR_TIME_LIMIT, 4884 /* enable/dsiable WDS for this VDEV */ 4885 WMI_10X_VDEV_PARAM_WDS, 4886 /* ATIM Window */ 4887 WMI_10X_VDEV_PARAM_ATIM_WINDOW, 4888 /* BMISS max */ 4889 WMI_10X_VDEV_PARAM_BMISS_COUNT_MAX, 4890 /* WMM enables/disabled */ 4891 WMI_10X_VDEV_PARAM_FEATURE_WMM, 4892 /* Channel width */ 4893 WMI_10X_VDEV_PARAM_CHWIDTH, 4894 /* Channel Offset */ 4895 WMI_10X_VDEV_PARAM_CHEXTOFFSET, 4896 /* Disable HT Protection */ 4897 WMI_10X_VDEV_PARAM_DISABLE_HTPROTECTION, 4898 /* Quick STA Kickout */ 4899 WMI_10X_VDEV_PARAM_STA_QUICKKICKOUT, 4900 /* Rate to be used with Management frames */ 4901 WMI_10X_VDEV_PARAM_MGMT_RATE, 4902 /* Protection Mode */ 4903 WMI_10X_VDEV_PARAM_PROTECTION_MODE, 4904 /* Fixed rate setting */ 4905 WMI_10X_VDEV_PARAM_FIXED_RATE, 4906 /* Short GI Enable/Disable */ 4907 WMI_10X_VDEV_PARAM_SGI, 4908 /* Enable LDPC */ 4909 WMI_10X_VDEV_PARAM_LDPC, 4910 /* Enable Tx STBC */ 4911 WMI_10X_VDEV_PARAM_TX_STBC, 4912 /* Enable Rx STBC */ 4913 WMI_10X_VDEV_PARAM_RX_STBC, 4914 /* Intra BSS forwarding */ 4915 WMI_10X_VDEV_PARAM_INTRA_BSS_FWD, 4916 /* Setting Default xmit key for Vdev */ 4917 WMI_10X_VDEV_PARAM_DEF_KEYID, 4918 /* NSS width */ 4919 WMI_10X_VDEV_PARAM_NSS, 4920 /* Set the custom rate for the broadcast data frames */ 4921 WMI_10X_VDEV_PARAM_BCAST_DATA_RATE, 4922 /* Set the custom rate (rate-code) for multicast data frames */ 4923 WMI_10X_VDEV_PARAM_MCAST_DATA_RATE, 4924 /* Tx multicast packet indicate Enable/Disable */ 4925 WMI_10X_VDEV_PARAM_MCAST_INDICATE, 4926 /* Tx DHCP packet indicate Enable/Disable */ 4927 WMI_10X_VDEV_PARAM_DHCP_INDICATE, 4928 /* Enable host inspection of Tx unicast packet to unknown destination */ 4929 WMI_10X_VDEV_PARAM_UNKNOWN_DEST_INDICATE, 4930 4931 /* The minimum amount of time AP begins to consider STA inactive */ 4932 WMI_10X_VDEV_PARAM_AP_KEEPALIVE_MIN_IDLE_INACTIVE_TIME_SECS, 4933 4934 /* 4935 * An associated STA is considered inactive when there is no recent 4936 * TX/RX activity and no downlink frames are buffered for it. Once a 4937 * STA exceeds the maximum idle inactive time, the AP will send an 4938 * 802.11 data-null as a keep alive to verify the STA is still 4939 * associated. If the STA does ACK the data-null, or if the data-null 4940 * is buffered and the STA does not retrieve it, the STA will be 4941 * considered unresponsive 4942 * (see WMI_10X_VDEV_AP_KEEPALIVE_MAX_UNRESPONSIVE_TIME_SECS). 4943 */ 4944 WMI_10X_VDEV_PARAM_AP_KEEPALIVE_MAX_IDLE_INACTIVE_TIME_SECS, 4945 4946 /* 4947 * An associated STA is considered unresponsive if there is no recent 4948 * TX/RX activity and downlink frames are buffered for it. Once a STA 4949 * exceeds the maximum unresponsive time, the AP will send a 4950 * WMI_10X_STA_KICKOUT event to the host so the STA can be deleted. 4951 */ 4952 WMI_10X_VDEV_PARAM_AP_KEEPALIVE_MAX_UNRESPONSIVE_TIME_SECS, 4953 4954 /* Enable NAWDS : MCAST INSPECT Enable, NAWDS Flag set */ 4955 WMI_10X_VDEV_PARAM_AP_ENABLE_NAWDS, 4956 4957 WMI_10X_VDEV_PARAM_MCAST2UCAST_SET, 4958 /* Enable/Disable RTS-CTS */ 4959 WMI_10X_VDEV_PARAM_ENABLE_RTSCTS, 4960 4961 WMI_10X_VDEV_PARAM_AP_DETECT_OUT_OF_SYNC_SLEEPING_STA_TIME_SECS, 4962 4963 /* following are available as of firmware 10.2 */ 4964 WMI_10X_VDEV_PARAM_TX_ENCAP_TYPE, 4965 WMI_10X_VDEV_PARAM_CABQ_MAXDUR, 4966 WMI_10X_VDEV_PARAM_MFPTEST_SET, 4967 WMI_10X_VDEV_PARAM_RTS_FIXED_RATE, 4968 WMI_10X_VDEV_PARAM_VHT_SGIMASK, 4969 WMI_10X_VDEV_PARAM_VHT80_RATEMASK, 4970 WMI_10X_VDEV_PARAM_TSF_INCREMENT, 4971 }; 4972 4973 enum wmi_10_4_vdev_param { 4974 WMI_10_4_VDEV_PARAM_RTS_THRESHOLD = 0x1, 4975 WMI_10_4_VDEV_PARAM_FRAGMENTATION_THRESHOLD, 4976 WMI_10_4_VDEV_PARAM_BEACON_INTERVAL, 4977 WMI_10_4_VDEV_PARAM_LISTEN_INTERVAL, 4978 WMI_10_4_VDEV_PARAM_MULTICAST_RATE, 4979 WMI_10_4_VDEV_PARAM_MGMT_TX_RATE, 4980 WMI_10_4_VDEV_PARAM_SLOT_TIME, 4981 WMI_10_4_VDEV_PARAM_PREAMBLE, 4982 WMI_10_4_VDEV_PARAM_SWBA_TIME, 4983 WMI_10_4_VDEV_STATS_UPDATE_PERIOD, 4984 WMI_10_4_VDEV_PWRSAVE_AGEOUT_TIME, 4985 WMI_10_4_VDEV_HOST_SWBA_INTERVAL, 4986 WMI_10_4_VDEV_PARAM_DTIM_PERIOD, 4987 WMI_10_4_VDEV_OC_SCHEDULER_AIR_TIME_LIMIT, 4988 WMI_10_4_VDEV_PARAM_WDS, 4989 WMI_10_4_VDEV_PARAM_ATIM_WINDOW, 4990 WMI_10_4_VDEV_PARAM_BMISS_COUNT_MAX, 4991 WMI_10_4_VDEV_PARAM_BMISS_FIRST_BCNT, 4992 WMI_10_4_VDEV_PARAM_BMISS_FINAL_BCNT, 4993 WMI_10_4_VDEV_PARAM_FEATURE_WMM, 4994 WMI_10_4_VDEV_PARAM_CHWIDTH, 4995 WMI_10_4_VDEV_PARAM_CHEXTOFFSET, 4996 WMI_10_4_VDEV_PARAM_DISABLE_HTPROTECTION, 4997 WMI_10_4_VDEV_PARAM_STA_QUICKKICKOUT, 4998 WMI_10_4_VDEV_PARAM_MGMT_RATE, 4999 WMI_10_4_VDEV_PARAM_PROTECTION_MODE, 5000 WMI_10_4_VDEV_PARAM_FIXED_RATE, 5001 WMI_10_4_VDEV_PARAM_SGI, 5002 WMI_10_4_VDEV_PARAM_LDPC, 5003 WMI_10_4_VDEV_PARAM_TX_STBC, 5004 WMI_10_4_VDEV_PARAM_RX_STBC, 5005 WMI_10_4_VDEV_PARAM_INTRA_BSS_FWD, 5006 WMI_10_4_VDEV_PARAM_DEF_KEYID, 5007 WMI_10_4_VDEV_PARAM_NSS, 5008 WMI_10_4_VDEV_PARAM_BCAST_DATA_RATE, 5009 WMI_10_4_VDEV_PARAM_MCAST_DATA_RATE, 5010 WMI_10_4_VDEV_PARAM_MCAST_INDICATE, 5011 WMI_10_4_VDEV_PARAM_DHCP_INDICATE, 5012 WMI_10_4_VDEV_PARAM_UNKNOWN_DEST_INDICATE, 5013 WMI_10_4_VDEV_PARAM_AP_KEEPALIVE_MIN_IDLE_INACTIVE_TIME_SECS, 5014 WMI_10_4_VDEV_PARAM_AP_KEEPALIVE_MAX_IDLE_INACTIVE_TIME_SECS, 5015 WMI_10_4_VDEV_PARAM_AP_KEEPALIVE_MAX_UNRESPONSIVE_TIME_SECS, 5016 WMI_10_4_VDEV_PARAM_AP_ENABLE_NAWDS, 5017 WMI_10_4_VDEV_PARAM_MCAST2UCAST_SET, 5018 WMI_10_4_VDEV_PARAM_ENABLE_RTSCTS, 5019 WMI_10_4_VDEV_PARAM_RC_NUM_RETRIES, 5020 WMI_10_4_VDEV_PARAM_TXBF, 5021 WMI_10_4_VDEV_PARAM_PACKET_POWERSAVE, 5022 WMI_10_4_VDEV_PARAM_DROP_UNENCRY, 5023 WMI_10_4_VDEV_PARAM_TX_ENCAP_TYPE, 5024 WMI_10_4_VDEV_PARAM_AP_DETECT_OUT_OF_SYNC_SLEEPING_STA_TIME_SECS, 5025 WMI_10_4_VDEV_PARAM_CABQ_MAXDUR, 5026 WMI_10_4_VDEV_PARAM_MFPTEST_SET, 5027 WMI_10_4_VDEV_PARAM_RTS_FIXED_RATE, 5028 WMI_10_4_VDEV_PARAM_VHT_SGIMASK, 5029 WMI_10_4_VDEV_PARAM_VHT80_RATEMASK, 5030 WMI_10_4_VDEV_PARAM_EARLY_RX_ADJUST_ENABLE, 5031 WMI_10_4_VDEV_PARAM_EARLY_RX_TGT_BMISS_NUM, 5032 WMI_10_4_VDEV_PARAM_EARLY_RX_BMISS_SAMPLE_CYCLE, 5033 WMI_10_4_VDEV_PARAM_EARLY_RX_SLOP_STEP, 5034 WMI_10_4_VDEV_PARAM_EARLY_RX_INIT_SLOP, 5035 WMI_10_4_VDEV_PARAM_EARLY_RX_ADJUST_PAUSE, 5036 WMI_10_4_VDEV_PARAM_PROXY_STA, 5037 WMI_10_4_VDEV_PARAM_MERU_VC, 5038 WMI_10_4_VDEV_PARAM_RX_DECAP_TYPE, 5039 WMI_10_4_VDEV_PARAM_BW_NSS_RATEMASK, 5040 WMI_10_4_VDEV_PARAM_SENSOR_AP, 5041 WMI_10_4_VDEV_PARAM_BEACON_RATE, 5042 WMI_10_4_VDEV_PARAM_DTIM_ENABLE_CTS, 5043 WMI_10_4_VDEV_PARAM_STA_KICKOUT, 5044 WMI_10_4_VDEV_PARAM_CAPABILITIES, 5045 WMI_10_4_VDEV_PARAM_TSF_INCREMENT, 5046 WMI_10_4_VDEV_PARAM_RX_FILTER, 5047 WMI_10_4_VDEV_PARAM_MGMT_TX_POWER, 5048 WMI_10_4_VDEV_PARAM_ATF_SSID_SCHED_POLICY, 5049 WMI_10_4_VDEV_PARAM_DISABLE_DYN_BW_RTS, 5050 WMI_10_4_VDEV_PARAM_TSF_DECREMENT, 5051 }; 5052 5053 #define WMI_VDEV_PARAM_TXBF_SU_TX_BFEE BIT(0) 5054 #define WMI_VDEV_PARAM_TXBF_MU_TX_BFEE BIT(1) 5055 #define WMI_VDEV_PARAM_TXBF_SU_TX_BFER BIT(2) 5056 #define WMI_VDEV_PARAM_TXBF_MU_TX_BFER BIT(3) 5057 5058 #define WMI_TXBF_STS_CAP_OFFSET_LSB 4 5059 #define WMI_TXBF_STS_CAP_OFFSET_MASK 0xf0 5060 #define WMI_BF_SOUND_DIM_OFFSET_LSB 8 5061 #define WMI_BF_SOUND_DIM_OFFSET_MASK 0xf00 5062 5063 /* slot time long */ 5064 #define WMI_VDEV_SLOT_TIME_LONG 0x1 5065 /* slot time short */ 5066 #define WMI_VDEV_SLOT_TIME_SHORT 0x2 5067 /* preablbe long */ 5068 #define WMI_VDEV_PREAMBLE_LONG 0x1 5069 /* preablbe short */ 5070 #define WMI_VDEV_PREAMBLE_SHORT 0x2 5071 5072 enum wmi_start_event_param { 5073 WMI_VDEV_RESP_START_EVENT = 0, 5074 WMI_VDEV_RESP_RESTART_EVENT, 5075 }; 5076 5077 struct wmi_vdev_start_response_event { 5078 __le32 vdev_id; 5079 __le32 req_id; 5080 __le32 resp_type; /* %WMI_VDEV_RESP_ */ 5081 __le32 status; 5082 } __packed; 5083 5084 struct wmi_vdev_standby_req_event { 5085 /* unique id identifying the VDEV, generated by the caller */ 5086 __le32 vdev_id; 5087 } __packed; 5088 5089 struct wmi_vdev_resume_req_event { 5090 /* unique id identifying the VDEV, generated by the caller */ 5091 __le32 vdev_id; 5092 } __packed; 5093 5094 struct wmi_vdev_stopped_event { 5095 /* unique id identifying the VDEV, generated by the caller */ 5096 __le32 vdev_id; 5097 } __packed; 5098 5099 /* 5100 * common structure used for simple events 5101 * (stopped, resume_req, standby response) 5102 */ 5103 struct wmi_vdev_simple_event { 5104 /* unique id identifying the VDEV, generated by the caller */ 5105 __le32 vdev_id; 5106 } __packed; 5107 5108 /* VDEV start response status codes */ 5109 /* VDEV successfully started */ 5110 #define WMI_INIFIED_VDEV_START_RESPONSE_STATUS_SUCCESS 0x0 5111 5112 /* requested VDEV not found */ 5113 #define WMI_INIFIED_VDEV_START_RESPONSE_INVALID_VDEVID 0x1 5114 5115 /* unsupported VDEV combination */ 5116 #define WMI_INIFIED_VDEV_START_RESPONSE_NOT_SUPPORTED 0x2 5117 5118 /* TODO: please add more comments if you have in-depth information */ 5119 struct wmi_vdev_spectral_conf_cmd { 5120 __le32 vdev_id; 5121 5122 /* number of fft samples to send (0 for infinite) */ 5123 __le32 scan_count; 5124 __le32 scan_period; 5125 __le32 scan_priority; 5126 5127 /* number of bins in the FFT: 2^(fft_size - bin_scale) */ 5128 __le32 scan_fft_size; 5129 __le32 scan_gc_ena; 5130 __le32 scan_restart_ena; 5131 __le32 scan_noise_floor_ref; 5132 __le32 scan_init_delay; 5133 __le32 scan_nb_tone_thr; 5134 __le32 scan_str_bin_thr; 5135 __le32 scan_wb_rpt_mode; 5136 __le32 scan_rssi_rpt_mode; 5137 __le32 scan_rssi_thr; 5138 __le32 scan_pwr_format; 5139 5140 /* rpt_mode: Format of FFT report to software for spectral scan 5141 * triggered FFTs: 5142 * 0: No FFT report (only spectral scan summary report) 5143 * 1: 2-dword summary of metrics for each completed FFT + spectral 5144 * scan summary report 5145 * 2: 2-dword summary of metrics for each completed FFT + 5146 * 1x- oversampled bins(in-band) per FFT + spectral scan summary 5147 * report 5148 * 3: 2-dword summary of metrics for each completed FFT + 5149 * 2x- oversampled bins (all) per FFT + spectral scan summary 5150 */ 5151 __le32 scan_rpt_mode; 5152 __le32 scan_bin_scale; 5153 __le32 scan_dbm_adj; 5154 __le32 scan_chn_mask; 5155 } __packed; 5156 5157 struct wmi_vdev_spectral_conf_arg { 5158 u32 vdev_id; 5159 u32 scan_count; 5160 u32 scan_period; 5161 u32 scan_priority; 5162 u32 scan_fft_size; 5163 u32 scan_gc_ena; 5164 u32 scan_restart_ena; 5165 u32 scan_noise_floor_ref; 5166 u32 scan_init_delay; 5167 u32 scan_nb_tone_thr; 5168 u32 scan_str_bin_thr; 5169 u32 scan_wb_rpt_mode; 5170 u32 scan_rssi_rpt_mode; 5171 u32 scan_rssi_thr; 5172 u32 scan_pwr_format; 5173 u32 scan_rpt_mode; 5174 u32 scan_bin_scale; 5175 u32 scan_dbm_adj; 5176 u32 scan_chn_mask; 5177 }; 5178 5179 #define WMI_SPECTRAL_ENABLE_DEFAULT 0 5180 #define WMI_SPECTRAL_COUNT_DEFAULT 0 5181 #define WMI_SPECTRAL_PERIOD_DEFAULT 35 5182 #define WMI_SPECTRAL_PRIORITY_DEFAULT 1 5183 #define WMI_SPECTRAL_FFT_SIZE_DEFAULT 7 5184 #define WMI_SPECTRAL_GC_ENA_DEFAULT 1 5185 #define WMI_SPECTRAL_RESTART_ENA_DEFAULT 0 5186 #define WMI_SPECTRAL_NOISE_FLOOR_REF_DEFAULT -96 5187 #define WMI_SPECTRAL_INIT_DELAY_DEFAULT 80 5188 #define WMI_SPECTRAL_NB_TONE_THR_DEFAULT 12 5189 #define WMI_SPECTRAL_STR_BIN_THR_DEFAULT 8 5190 #define WMI_SPECTRAL_WB_RPT_MODE_DEFAULT 0 5191 #define WMI_SPECTRAL_RSSI_RPT_MODE_DEFAULT 0 5192 #define WMI_SPECTRAL_RSSI_THR_DEFAULT 0xf0 5193 #define WMI_SPECTRAL_PWR_FORMAT_DEFAULT 0 5194 #define WMI_SPECTRAL_RPT_MODE_DEFAULT 2 5195 #define WMI_SPECTRAL_BIN_SCALE_DEFAULT 1 5196 #define WMI_SPECTRAL_DBM_ADJ_DEFAULT 1 5197 #define WMI_SPECTRAL_CHN_MASK_DEFAULT 1 5198 5199 struct wmi_vdev_spectral_enable_cmd { 5200 __le32 vdev_id; 5201 __le32 trigger_cmd; 5202 __le32 enable_cmd; 5203 } __packed; 5204 5205 #define WMI_SPECTRAL_TRIGGER_CMD_TRIGGER 1 5206 #define WMI_SPECTRAL_TRIGGER_CMD_CLEAR 2 5207 #define WMI_SPECTRAL_ENABLE_CMD_ENABLE 1 5208 #define WMI_SPECTRAL_ENABLE_CMD_DISABLE 2 5209 5210 /* Beacon processing related command and event structures */ 5211 struct wmi_bcn_tx_hdr { 5212 __le32 vdev_id; 5213 __le32 tx_rate; 5214 __le32 tx_power; 5215 __le32 bcn_len; 5216 } __packed; 5217 5218 struct wmi_bcn_tx_cmd { 5219 struct wmi_bcn_tx_hdr hdr; 5220 u8 *bcn[0]; 5221 } __packed; 5222 5223 struct wmi_bcn_tx_arg { 5224 u32 vdev_id; 5225 u32 tx_rate; 5226 u32 tx_power; 5227 u32 bcn_len; 5228 const void *bcn; 5229 }; 5230 5231 enum wmi_bcn_tx_ref_flags { 5232 WMI_BCN_TX_REF_FLAG_DTIM_ZERO = 0x1, 5233 WMI_BCN_TX_REF_FLAG_DELIVER_CAB = 0x2, 5234 }; 5235 5236 /* TODO: It is unclear why "no antenna" works while any other seemingly valid 5237 * chainmask yields no beacons on the air at all. 5238 */ 5239 #define WMI_BCN_TX_REF_DEF_ANTENNA 0 5240 5241 struct wmi_bcn_tx_ref_cmd { 5242 __le32 vdev_id; 5243 __le32 data_len; 5244 /* physical address of the frame - dma pointer */ 5245 __le32 data_ptr; 5246 /* id for host to track */ 5247 __le32 msdu_id; 5248 /* frame ctrl to setup PPDU desc */ 5249 __le32 frame_control; 5250 /* to control CABQ traffic: WMI_BCN_TX_REF_FLAG_ */ 5251 __le32 flags; 5252 /* introduced in 10.2 */ 5253 __le32 antenna_mask; 5254 } __packed; 5255 5256 /* Beacon filter */ 5257 #define WMI_BCN_FILTER_ALL 0 /* Filter all beacons */ 5258 #define WMI_BCN_FILTER_NONE 1 /* Pass all beacons */ 5259 #define WMI_BCN_FILTER_RSSI 2 /* Pass Beacons RSSI >= RSSI threshold */ 5260 #define WMI_BCN_FILTER_BSSID 3 /* Pass Beacons with matching BSSID */ 5261 #define WMI_BCN_FILTER_SSID 4 /* Pass Beacons with matching SSID */ 5262 5263 struct wmi_bcn_filter_rx_cmd { 5264 /* Filter ID */ 5265 __le32 bcn_filter_id; 5266 /* Filter type - wmi_bcn_filter */ 5267 __le32 bcn_filter; 5268 /* Buffer len */ 5269 __le32 bcn_filter_len; 5270 /* Filter info (threshold, BSSID, RSSI) */ 5271 u8 *bcn_filter_buf; 5272 } __packed; 5273 5274 /* Capabilities and IEs to be passed to firmware */ 5275 struct wmi_bcn_prb_info { 5276 /* Capabilities */ 5277 __le32 caps; 5278 /* ERP info */ 5279 __le32 erp; 5280 /* Advanced capabilities */ 5281 /* HT capabilities */ 5282 /* HT Info */ 5283 /* ibss_dfs */ 5284 /* wpa Info */ 5285 /* rsn Info */ 5286 /* rrm info */ 5287 /* ath_ext */ 5288 /* app IE */ 5289 } __packed; 5290 5291 struct wmi_bcn_tmpl_cmd { 5292 /* unique id identifying the VDEV, generated by the caller */ 5293 __le32 vdev_id; 5294 /* TIM IE offset from the beginning of the template. */ 5295 __le32 tim_ie_offset; 5296 /* beacon probe capabilities and IEs */ 5297 struct wmi_bcn_prb_info bcn_prb_info; 5298 /* beacon buffer length */ 5299 __le32 buf_len; 5300 /* variable length data */ 5301 u8 data[1]; 5302 } __packed; 5303 5304 struct wmi_prb_tmpl_cmd { 5305 /* unique id identifying the VDEV, generated by the caller */ 5306 __le32 vdev_id; 5307 /* beacon probe capabilities and IEs */ 5308 struct wmi_bcn_prb_info bcn_prb_info; 5309 /* beacon buffer length */ 5310 __le32 buf_len; 5311 /* Variable length data */ 5312 u8 data[1]; 5313 } __packed; 5314 5315 enum wmi_sta_ps_mode { 5316 /* enable power save for the given STA VDEV */ 5317 WMI_STA_PS_MODE_DISABLED = 0, 5318 /* disable power save for a given STA VDEV */ 5319 WMI_STA_PS_MODE_ENABLED = 1, 5320 }; 5321 5322 struct wmi_sta_powersave_mode_cmd { 5323 /* unique id identifying the VDEV, generated by the caller */ 5324 __le32 vdev_id; 5325 5326 /* 5327 * Power save mode 5328 * (see enum wmi_sta_ps_mode) 5329 */ 5330 __le32 sta_ps_mode; 5331 } __packed; 5332 5333 enum wmi_csa_offload_en { 5334 WMI_CSA_OFFLOAD_DISABLE = 0, 5335 WMI_CSA_OFFLOAD_ENABLE = 1, 5336 }; 5337 5338 struct wmi_csa_offload_enable_cmd { 5339 __le32 vdev_id; 5340 __le32 csa_offload_enable; 5341 } __packed; 5342 5343 struct wmi_csa_offload_chanswitch_cmd { 5344 __le32 vdev_id; 5345 struct wmi_channel chan; 5346 } __packed; 5347 5348 /* 5349 * This parameter controls the policy for retrieving frames from AP while the 5350 * STA is in sleep state. 5351 * 5352 * Only takes affect if the sta_ps_mode is enabled 5353 */ 5354 enum wmi_sta_ps_param_rx_wake_policy { 5355 /* 5356 * Wake up when ever there is an RX activity on the VDEV. In this mode 5357 * the Power save SM(state machine) will come out of sleep by either 5358 * sending null frame (or) a data frame (with PS==0) in response to TIM 5359 * bit set in the received beacon frame from AP. 5360 */ 5361 WMI_STA_PS_RX_WAKE_POLICY_WAKE = 0, 5362 5363 /* 5364 * Here the power save state machine will not wakeup in response to TIM 5365 * bit, instead it will send a PSPOLL (or) UASPD trigger based on UAPSD 5366 * configuration setup by WMISET_PS_SET_UAPSD WMI command. When all 5367 * access categories are delivery-enabled, the station will send a 5368 * UAPSD trigger frame, otherwise it will send a PS-Poll. 5369 */ 5370 WMI_STA_PS_RX_WAKE_POLICY_POLL_UAPSD = 1, 5371 }; 5372 5373 /* 5374 * Number of tx frames/beacon that cause the power save SM to wake up. 5375 * 5376 * Value 1 causes the SM to wake up for every TX. Value 0 has a special 5377 * meaning, It will cause the SM to never wake up. This is useful if you want 5378 * to keep the system to sleep all the time for some kind of test mode . host 5379 * can change this parameter any time. It will affect at the next tx frame. 5380 */ 5381 enum wmi_sta_ps_param_tx_wake_threshold { 5382 WMI_STA_PS_TX_WAKE_THRESHOLD_NEVER = 0, 5383 WMI_STA_PS_TX_WAKE_THRESHOLD_ALWAYS = 1, 5384 5385 /* 5386 * Values greater than one indicate that many TX attempts per beacon 5387 * interval before the STA will wake up 5388 */ 5389 }; 5390 5391 /* 5392 * The maximum number of PS-Poll frames the FW will send in response to 5393 * traffic advertised in TIM before waking up (by sending a null frame with PS 5394 * = 0). Value 0 has a special meaning: there is no maximum count and the FW 5395 * will send as many PS-Poll as are necessary to retrieve buffered BU. This 5396 * parameter is used when the RX wake policy is 5397 * WMI_STA_PS_RX_WAKE_POLICY_POLL_UAPSD and ignored when the RX wake 5398 * policy is WMI_STA_PS_RX_WAKE_POLICY_WAKE. 5399 */ 5400 enum wmi_sta_ps_param_pspoll_count { 5401 WMI_STA_PS_PSPOLL_COUNT_NO_MAX = 0, 5402 /* 5403 * Values greater than 0 indicate the maximum numer of PS-Poll frames 5404 * FW will send before waking up. 5405 */ 5406 5407 /* When u-APSD is enabled the firmware will be very reluctant to exit 5408 * STA PS. This could result in very poor Rx performance with STA doing 5409 * PS-Poll for each and every buffered frame. This value is a bit 5410 * arbitrary. 5411 */ 5412 WMI_STA_PS_PSPOLL_COUNT_UAPSD = 3, 5413 }; 5414 5415 /* 5416 * This will include the delivery and trigger enabled state for every AC. 5417 * This is the negotiated state with AP. The host MLME needs to set this based 5418 * on AP capability and the state Set in the association request by the 5419 * station MLME.Lower 8 bits of the value specify the UAPSD configuration. 5420 */ 5421 #define WMI_UAPSD_AC_TYPE_DELI 0 5422 #define WMI_UAPSD_AC_TYPE_TRIG 1 5423 5424 #define WMI_UAPSD_AC_BIT_MASK(ac, type) \ 5425 (type == WMI_UAPSD_AC_TYPE_DELI ? 1 << (ac << 1) : 1 << ((ac << 1) + 1)) 5426 5427 enum wmi_sta_ps_param_uapsd { 5428 WMI_STA_PS_UAPSD_AC0_DELIVERY_EN = (1 << 0), 5429 WMI_STA_PS_UAPSD_AC0_TRIGGER_EN = (1 << 1), 5430 WMI_STA_PS_UAPSD_AC1_DELIVERY_EN = (1 << 2), 5431 WMI_STA_PS_UAPSD_AC1_TRIGGER_EN = (1 << 3), 5432 WMI_STA_PS_UAPSD_AC2_DELIVERY_EN = (1 << 4), 5433 WMI_STA_PS_UAPSD_AC2_TRIGGER_EN = (1 << 5), 5434 WMI_STA_PS_UAPSD_AC3_DELIVERY_EN = (1 << 6), 5435 WMI_STA_PS_UAPSD_AC3_TRIGGER_EN = (1 << 7), 5436 }; 5437 5438 #define WMI_STA_UAPSD_MAX_INTERVAL_MSEC UINT_MAX 5439 5440 struct wmi_sta_uapsd_auto_trig_param { 5441 __le32 wmm_ac; 5442 __le32 user_priority; 5443 __le32 service_interval; 5444 __le32 suspend_interval; 5445 __le32 delay_interval; 5446 }; 5447 5448 struct wmi_sta_uapsd_auto_trig_cmd_fixed_param { 5449 __le32 vdev_id; 5450 struct wmi_mac_addr peer_macaddr; 5451 __le32 num_ac; 5452 }; 5453 5454 struct wmi_sta_uapsd_auto_trig_arg { 5455 u32 wmm_ac; 5456 u32 user_priority; 5457 u32 service_interval; 5458 u32 suspend_interval; 5459 u32 delay_interval; 5460 }; 5461 5462 enum wmi_sta_powersave_param { 5463 /* 5464 * Controls how frames are retrievd from AP while STA is sleeping 5465 * 5466 * (see enum wmi_sta_ps_param_rx_wake_policy) 5467 */ 5468 WMI_STA_PS_PARAM_RX_WAKE_POLICY = 0, 5469 5470 /* 5471 * The STA will go active after this many TX 5472 * 5473 * (see enum wmi_sta_ps_param_tx_wake_threshold) 5474 */ 5475 WMI_STA_PS_PARAM_TX_WAKE_THRESHOLD = 1, 5476 5477 /* 5478 * Number of PS-Poll to send before STA wakes up 5479 * 5480 * (see enum wmi_sta_ps_param_pspoll_count) 5481 * 5482 */ 5483 WMI_STA_PS_PARAM_PSPOLL_COUNT = 2, 5484 5485 /* 5486 * TX/RX inactivity time in msec before going to sleep. 5487 * 5488 * The power save SM will monitor tx/rx activity on the VDEV, if no 5489 * activity for the specified msec of the parameter the Power save 5490 * SM will go to sleep. 5491 */ 5492 WMI_STA_PS_PARAM_INACTIVITY_TIME = 3, 5493 5494 /* 5495 * Set uapsd configuration. 5496 * 5497 * (see enum wmi_sta_ps_param_uapsd) 5498 */ 5499 WMI_STA_PS_PARAM_UAPSD = 4, 5500 }; 5501 5502 struct wmi_sta_powersave_param_cmd { 5503 __le32 vdev_id; 5504 __le32 param_id; /* %WMI_STA_PS_PARAM_ */ 5505 __le32 param_value; 5506 } __packed; 5507 5508 /* No MIMO power save */ 5509 #define WMI_STA_MIMO_PS_MODE_DISABLE 5510 /* mimo powersave mode static*/ 5511 #define WMI_STA_MIMO_PS_MODE_STATIC 5512 /* mimo powersave mode dynamic */ 5513 #define WMI_STA_MIMO_PS_MODE_DYNAMIC 5514 5515 struct wmi_sta_mimo_ps_mode_cmd { 5516 /* unique id identifying the VDEV, generated by the caller */ 5517 __le32 vdev_id; 5518 /* mimo powersave mode as defined above */ 5519 __le32 mimo_pwrsave_mode; 5520 } __packed; 5521 5522 /* U-APSD configuration of peer station from (re)assoc request and TSPECs */ 5523 enum wmi_ap_ps_param_uapsd { 5524 WMI_AP_PS_UAPSD_AC0_DELIVERY_EN = (1 << 0), 5525 WMI_AP_PS_UAPSD_AC0_TRIGGER_EN = (1 << 1), 5526 WMI_AP_PS_UAPSD_AC1_DELIVERY_EN = (1 << 2), 5527 WMI_AP_PS_UAPSD_AC1_TRIGGER_EN = (1 << 3), 5528 WMI_AP_PS_UAPSD_AC2_DELIVERY_EN = (1 << 4), 5529 WMI_AP_PS_UAPSD_AC2_TRIGGER_EN = (1 << 5), 5530 WMI_AP_PS_UAPSD_AC3_DELIVERY_EN = (1 << 6), 5531 WMI_AP_PS_UAPSD_AC3_TRIGGER_EN = (1 << 7), 5532 }; 5533 5534 /* U-APSD maximum service period of peer station */ 5535 enum wmi_ap_ps_peer_param_max_sp { 5536 WMI_AP_PS_PEER_PARAM_MAX_SP_UNLIMITED = 0, 5537 WMI_AP_PS_PEER_PARAM_MAX_SP_2 = 1, 5538 WMI_AP_PS_PEER_PARAM_MAX_SP_4 = 2, 5539 WMI_AP_PS_PEER_PARAM_MAX_SP_6 = 3, 5540 MAX_WMI_AP_PS_PEER_PARAM_MAX_SP, 5541 }; 5542 5543 /* 5544 * AP power save parameter 5545 * Set a power save specific parameter for a peer station 5546 */ 5547 enum wmi_ap_ps_peer_param { 5548 /* Set uapsd configuration for a given peer. 5549 * 5550 * Include the delivery and trigger enabled state for every AC. 5551 * The host MLME needs to set this based on AP capability and stations 5552 * request Set in the association request received from the station. 5553 * 5554 * Lower 8 bits of the value specify the UAPSD configuration. 5555 * 5556 * (see enum wmi_ap_ps_param_uapsd) 5557 * The default value is 0. 5558 */ 5559 WMI_AP_PS_PEER_PARAM_UAPSD = 0, 5560 5561 /* 5562 * Set the service period for a UAPSD capable station 5563 * 5564 * The service period from wme ie in the (re)assoc request frame. 5565 * 5566 * (see enum wmi_ap_ps_peer_param_max_sp) 5567 */ 5568 WMI_AP_PS_PEER_PARAM_MAX_SP = 1, 5569 5570 /* Time in seconds for aging out buffered frames for STA in PS */ 5571 WMI_AP_PS_PEER_PARAM_AGEOUT_TIME = 2, 5572 }; 5573 5574 struct wmi_ap_ps_peer_cmd { 5575 /* unique id identifying the VDEV, generated by the caller */ 5576 __le32 vdev_id; 5577 5578 /* peer MAC address */ 5579 struct wmi_mac_addr peer_macaddr; 5580 5581 /* AP powersave param (see enum wmi_ap_ps_peer_param) */ 5582 __le32 param_id; 5583 5584 /* AP powersave param value */ 5585 __le32 param_value; 5586 } __packed; 5587 5588 /* 128 clients = 4 words */ 5589 #define WMI_TIM_BITMAP_ARRAY_SIZE 4 5590 5591 struct wmi_tim_info { 5592 __le32 tim_len; 5593 __le32 tim_mcast; 5594 __le32 tim_bitmap[WMI_TIM_BITMAP_ARRAY_SIZE]; 5595 __le32 tim_changed; 5596 __le32 tim_num_ps_pending; 5597 } __packed; 5598 5599 struct wmi_tim_info_arg { 5600 __le32 tim_len; 5601 __le32 tim_mcast; 5602 const __le32 *tim_bitmap; 5603 __le32 tim_changed; 5604 __le32 tim_num_ps_pending; 5605 } __packed; 5606 5607 /* Maximum number of NOA Descriptors supported */ 5608 #define WMI_P2P_MAX_NOA_DESCRIPTORS 4 5609 #define WMI_P2P_OPPPS_ENABLE_BIT BIT(0) 5610 #define WMI_P2P_OPPPS_CTWINDOW_OFFSET 1 5611 #define WMI_P2P_NOA_CHANGED_BIT BIT(0) 5612 5613 struct wmi_p2p_noa_info { 5614 /* Bit 0 - Flag to indicate an update in NOA schedule 5615 * Bits 7-1 - Reserved 5616 */ 5617 u8 changed; 5618 /* NOA index */ 5619 u8 index; 5620 /* Bit 0 - Opp PS state of the AP 5621 * Bits 1-7 - Ctwindow in TUs 5622 */ 5623 u8 ctwindow_oppps; 5624 /* Number of NOA descriptors */ 5625 u8 num_descriptors; 5626 5627 struct wmi_p2p_noa_descriptor descriptors[WMI_P2P_MAX_NOA_DESCRIPTORS]; 5628 } __packed; 5629 5630 struct wmi_bcn_info { 5631 struct wmi_tim_info tim_info; 5632 struct wmi_p2p_noa_info p2p_noa_info; 5633 } __packed; 5634 5635 struct wmi_host_swba_event { 5636 __le32 vdev_map; 5637 struct wmi_bcn_info bcn_info[0]; 5638 } __packed; 5639 5640 struct wmi_10_2_4_bcn_info { 5641 struct wmi_tim_info tim_info; 5642 /* The 10.2.4 FW doesn't have p2p NOA info */ 5643 } __packed; 5644 5645 struct wmi_10_2_4_host_swba_event { 5646 __le32 vdev_map; 5647 struct wmi_10_2_4_bcn_info bcn_info[0]; 5648 } __packed; 5649 5650 /* 16 words = 512 client + 1 word = for guard */ 5651 #define WMI_10_4_TIM_BITMAP_ARRAY_SIZE 17 5652 5653 struct wmi_10_4_tim_info { 5654 __le32 tim_len; 5655 __le32 tim_mcast; 5656 __le32 tim_bitmap[WMI_10_4_TIM_BITMAP_ARRAY_SIZE]; 5657 __le32 tim_changed; 5658 __le32 tim_num_ps_pending; 5659 } __packed; 5660 5661 #define WMI_10_4_P2P_MAX_NOA_DESCRIPTORS 1 5662 5663 struct wmi_10_4_p2p_noa_info { 5664 /* Bit 0 - Flag to indicate an update in NOA schedule 5665 * Bits 7-1 - Reserved 5666 */ 5667 u8 changed; 5668 /* NOA index */ 5669 u8 index; 5670 /* Bit 0 - Opp PS state of the AP 5671 * Bits 1-7 - Ctwindow in TUs 5672 */ 5673 u8 ctwindow_oppps; 5674 /* Number of NOA descriptors */ 5675 u8 num_descriptors; 5676 5677 struct wmi_p2p_noa_descriptor 5678 noa_descriptors[WMI_10_4_P2P_MAX_NOA_DESCRIPTORS]; 5679 } __packed; 5680 5681 struct wmi_10_4_bcn_info { 5682 struct wmi_10_4_tim_info tim_info; 5683 struct wmi_10_4_p2p_noa_info p2p_noa_info; 5684 } __packed; 5685 5686 struct wmi_10_4_host_swba_event { 5687 __le32 vdev_map; 5688 struct wmi_10_4_bcn_info bcn_info[0]; 5689 } __packed; 5690 5691 #define WMI_MAX_AP_VDEV 16 5692 5693 struct wmi_tbtt_offset_event { 5694 __le32 vdev_map; 5695 __le32 tbttoffset_list[WMI_MAX_AP_VDEV]; 5696 } __packed; 5697 5698 struct wmi_peer_create_cmd { 5699 __le32 vdev_id; 5700 struct wmi_mac_addr peer_macaddr; 5701 } __packed; 5702 5703 enum wmi_peer_type { 5704 WMI_PEER_TYPE_DEFAULT = 0, 5705 WMI_PEER_TYPE_BSS = 1, 5706 WMI_PEER_TYPE_TDLS = 2, 5707 }; 5708 5709 struct wmi_peer_delete_cmd { 5710 __le32 vdev_id; 5711 struct wmi_mac_addr peer_macaddr; 5712 } __packed; 5713 5714 struct wmi_peer_flush_tids_cmd { 5715 __le32 vdev_id; 5716 struct wmi_mac_addr peer_macaddr; 5717 __le32 peer_tid_bitmap; 5718 } __packed; 5719 5720 struct wmi_fixed_rate { 5721 /* 5722 * rate mode . 0: disable fixed rate (auto rate) 5723 * 1: legacy (non 11n) rate specified as ieee rate 2*Mbps 5724 * 2: ht20 11n rate specified as mcs index 5725 * 3: ht40 11n rate specified as mcs index 5726 */ 5727 __le32 rate_mode; 5728 /* 5729 * 4 rate values for 4 rate series. series 0 is stored in byte 0 (LSB) 5730 * and series 3 is stored at byte 3 (MSB) 5731 */ 5732 __le32 rate_series; 5733 /* 5734 * 4 retry counts for 4 rate series. retry count for rate 0 is stored 5735 * in byte 0 (LSB) and retry count for rate 3 is stored at byte 3 5736 * (MSB) 5737 */ 5738 __le32 rate_retries; 5739 } __packed; 5740 5741 struct wmi_peer_fixed_rate_cmd { 5742 /* unique id identifying the VDEV, generated by the caller */ 5743 __le32 vdev_id; 5744 /* peer MAC address */ 5745 struct wmi_mac_addr peer_macaddr; 5746 /* fixed rate */ 5747 struct wmi_fixed_rate peer_fixed_rate; 5748 } __packed; 5749 5750 #define WMI_MGMT_TID 17 5751 5752 struct wmi_addba_clear_resp_cmd { 5753 /* unique id identifying the VDEV, generated by the caller */ 5754 __le32 vdev_id; 5755 /* peer MAC address */ 5756 struct wmi_mac_addr peer_macaddr; 5757 } __packed; 5758 5759 struct wmi_addba_send_cmd { 5760 /* unique id identifying the VDEV, generated by the caller */ 5761 __le32 vdev_id; 5762 /* peer MAC address */ 5763 struct wmi_mac_addr peer_macaddr; 5764 /* Tid number */ 5765 __le32 tid; 5766 /* Buffer/Window size*/ 5767 __le32 buffersize; 5768 } __packed; 5769 5770 struct wmi_delba_send_cmd { 5771 /* unique id identifying the VDEV, generated by the caller */ 5772 __le32 vdev_id; 5773 /* peer MAC address */ 5774 struct wmi_mac_addr peer_macaddr; 5775 /* Tid number */ 5776 __le32 tid; 5777 /* Is Initiator */ 5778 __le32 initiator; 5779 /* Reason code */ 5780 __le32 reasoncode; 5781 } __packed; 5782 5783 struct wmi_addba_setresponse_cmd { 5784 /* unique id identifying the vdev, generated by the caller */ 5785 __le32 vdev_id; 5786 /* peer mac address */ 5787 struct wmi_mac_addr peer_macaddr; 5788 /* Tid number */ 5789 __le32 tid; 5790 /* status code */ 5791 __le32 statuscode; 5792 } __packed; 5793 5794 struct wmi_send_singleamsdu_cmd { 5795 /* unique id identifying the vdev, generated by the caller */ 5796 __le32 vdev_id; 5797 /* peer mac address */ 5798 struct wmi_mac_addr peer_macaddr; 5799 /* Tid number */ 5800 __le32 tid; 5801 } __packed; 5802 5803 enum wmi_peer_smps_state { 5804 WMI_PEER_SMPS_PS_NONE = 0x0, 5805 WMI_PEER_SMPS_STATIC = 0x1, 5806 WMI_PEER_SMPS_DYNAMIC = 0x2 5807 }; 5808 5809 enum wmi_peer_chwidth { 5810 WMI_PEER_CHWIDTH_20MHZ = 0, 5811 WMI_PEER_CHWIDTH_40MHZ = 1, 5812 WMI_PEER_CHWIDTH_80MHZ = 2, 5813 WMI_PEER_CHWIDTH_160MHZ = 3, 5814 }; 5815 5816 enum wmi_peer_param { 5817 WMI_PEER_SMPS_STATE = 0x1, /* see %wmi_peer_smps_state */ 5818 WMI_PEER_AMPDU = 0x2, 5819 WMI_PEER_AUTHORIZE = 0x3, 5820 WMI_PEER_CHAN_WIDTH = 0x4, 5821 WMI_PEER_NSS = 0x5, 5822 WMI_PEER_USE_4ADDR = 0x6, 5823 WMI_PEER_DEBUG = 0xa, 5824 WMI_PEER_DUMMY_VAR = 0xff, /* dummy parameter for STA PS workaround */ 5825 }; 5826 5827 struct wmi_peer_set_param_cmd { 5828 __le32 vdev_id; 5829 struct wmi_mac_addr peer_macaddr; 5830 __le32 param_id; 5831 __le32 param_value; 5832 } __packed; 5833 5834 #define MAX_SUPPORTED_RATES 128 5835 5836 struct wmi_rate_set { 5837 /* total number of rates */ 5838 __le32 num_rates; 5839 /* 5840 * rates (each 8bit value) packed into a 32 bit word. 5841 * the rates are filled from least significant byte to most 5842 * significant byte. 5843 */ 5844 __le32 rates[(MAX_SUPPORTED_RATES / 4) + 1]; 5845 } __packed; 5846 5847 struct wmi_rate_set_arg { 5848 unsigned int num_rates; 5849 u8 rates[MAX_SUPPORTED_RATES]; 5850 }; 5851 5852 /* 5853 * NOTE: It would bea good idea to represent the Tx MCS 5854 * info in one word and Rx in another word. This is split 5855 * into multiple words for convenience 5856 */ 5857 struct wmi_vht_rate_set { 5858 __le32 rx_max_rate; /* Max Rx data rate */ 5859 __le32 rx_mcs_set; /* Negotiated RX VHT rates */ 5860 __le32 tx_max_rate; /* Max Tx data rate */ 5861 __le32 tx_mcs_set; /* Negotiated TX VHT rates */ 5862 } __packed; 5863 5864 struct wmi_vht_rate_set_arg { 5865 u32 rx_max_rate; 5866 u32 rx_mcs_set; 5867 u32 tx_max_rate; 5868 u32 tx_mcs_set; 5869 }; 5870 5871 struct wmi_peer_set_rates_cmd { 5872 /* peer MAC address */ 5873 struct wmi_mac_addr peer_macaddr; 5874 /* legacy rate set */ 5875 struct wmi_rate_set peer_legacy_rates; 5876 /* ht rate set */ 5877 struct wmi_rate_set peer_ht_rates; 5878 } __packed; 5879 5880 struct wmi_peer_set_q_empty_callback_cmd { 5881 /* unique id identifying the VDEV, generated by the caller */ 5882 __le32 vdev_id; 5883 /* peer MAC address */ 5884 struct wmi_mac_addr peer_macaddr; 5885 __le32 callback_enable; 5886 } __packed; 5887 5888 struct wmi_peer_flags_map { 5889 u32 auth; 5890 u32 qos; 5891 u32 need_ptk_4_way; 5892 u32 need_gtk_2_way; 5893 u32 apsd; 5894 u32 ht; 5895 u32 bw40; 5896 u32 stbc; 5897 u32 ldbc; 5898 u32 dyn_mimops; 5899 u32 static_mimops; 5900 u32 spatial_mux; 5901 u32 vht; 5902 u32 bw80; 5903 u32 vht_2g; 5904 u32 pmf; 5905 u32 bw160; 5906 }; 5907 5908 enum wmi_peer_flags { 5909 WMI_PEER_AUTH = 0x00000001, 5910 WMI_PEER_QOS = 0x00000002, 5911 WMI_PEER_NEED_PTK_4_WAY = 0x00000004, 5912 WMI_PEER_NEED_GTK_2_WAY = 0x00000010, 5913 WMI_PEER_APSD = 0x00000800, 5914 WMI_PEER_HT = 0x00001000, 5915 WMI_PEER_40MHZ = 0x00002000, 5916 WMI_PEER_STBC = 0x00008000, 5917 WMI_PEER_LDPC = 0x00010000, 5918 WMI_PEER_DYN_MIMOPS = 0x00020000, 5919 WMI_PEER_STATIC_MIMOPS = 0x00040000, 5920 WMI_PEER_SPATIAL_MUX = 0x00200000, 5921 WMI_PEER_VHT = 0x02000000, 5922 WMI_PEER_80MHZ = 0x04000000, 5923 WMI_PEER_VHT_2G = 0x08000000, 5924 WMI_PEER_PMF = 0x10000000, 5925 WMI_PEER_160MHZ = 0x20000000 5926 }; 5927 5928 enum wmi_10x_peer_flags { 5929 WMI_10X_PEER_AUTH = 0x00000001, 5930 WMI_10X_PEER_QOS = 0x00000002, 5931 WMI_10X_PEER_NEED_PTK_4_WAY = 0x00000004, 5932 WMI_10X_PEER_NEED_GTK_2_WAY = 0x00000010, 5933 WMI_10X_PEER_APSD = 0x00000800, 5934 WMI_10X_PEER_HT = 0x00001000, 5935 WMI_10X_PEER_40MHZ = 0x00002000, 5936 WMI_10X_PEER_STBC = 0x00008000, 5937 WMI_10X_PEER_LDPC = 0x00010000, 5938 WMI_10X_PEER_DYN_MIMOPS = 0x00020000, 5939 WMI_10X_PEER_STATIC_MIMOPS = 0x00040000, 5940 WMI_10X_PEER_SPATIAL_MUX = 0x00200000, 5941 WMI_10X_PEER_VHT = 0x02000000, 5942 WMI_10X_PEER_80MHZ = 0x04000000, 5943 WMI_10X_PEER_160MHZ = 0x20000000 5944 }; 5945 5946 enum wmi_10_2_peer_flags { 5947 WMI_10_2_PEER_AUTH = 0x00000001, 5948 WMI_10_2_PEER_QOS = 0x00000002, 5949 WMI_10_2_PEER_NEED_PTK_4_WAY = 0x00000004, 5950 WMI_10_2_PEER_NEED_GTK_2_WAY = 0x00000010, 5951 WMI_10_2_PEER_APSD = 0x00000800, 5952 WMI_10_2_PEER_HT = 0x00001000, 5953 WMI_10_2_PEER_40MHZ = 0x00002000, 5954 WMI_10_2_PEER_STBC = 0x00008000, 5955 WMI_10_2_PEER_LDPC = 0x00010000, 5956 WMI_10_2_PEER_DYN_MIMOPS = 0x00020000, 5957 WMI_10_2_PEER_STATIC_MIMOPS = 0x00040000, 5958 WMI_10_2_PEER_SPATIAL_MUX = 0x00200000, 5959 WMI_10_2_PEER_VHT = 0x02000000, 5960 WMI_10_2_PEER_80MHZ = 0x04000000, 5961 WMI_10_2_PEER_VHT_2G = 0x08000000, 5962 WMI_10_2_PEER_PMF = 0x10000000, 5963 WMI_10_2_PEER_160MHZ = 0x20000000 5964 }; 5965 5966 /* 5967 * Peer rate capabilities. 5968 * 5969 * This is of interest to the ratecontrol 5970 * module which resides in the firmware. The bit definitions are 5971 * consistent with that defined in if_athrate.c. 5972 */ 5973 #define WMI_RC_DS_FLAG 0x01 5974 #define WMI_RC_CW40_FLAG 0x02 5975 #define WMI_RC_SGI_FLAG 0x04 5976 #define WMI_RC_HT_FLAG 0x08 5977 #define WMI_RC_RTSCTS_FLAG 0x10 5978 #define WMI_RC_TX_STBC_FLAG 0x20 5979 #define WMI_RC_RX_STBC_FLAG 0xC0 5980 #define WMI_RC_RX_STBC_FLAG_S 6 5981 #define WMI_RC_WEP_TKIP_FLAG 0x100 5982 #define WMI_RC_TS_FLAG 0x200 5983 #define WMI_RC_UAPSD_FLAG 0x400 5984 5985 /* Maximum listen interval supported by hw in units of beacon interval */ 5986 #define ATH10K_MAX_HW_LISTEN_INTERVAL 5 5987 5988 struct wmi_common_peer_assoc_complete_cmd { 5989 struct wmi_mac_addr peer_macaddr; 5990 __le32 vdev_id; 5991 __le32 peer_new_assoc; /* 1=assoc, 0=reassoc */ 5992 __le32 peer_associd; /* 16 LSBs */ 5993 __le32 peer_flags; 5994 __le32 peer_caps; /* 16 LSBs */ 5995 __le32 peer_listen_intval; 5996 __le32 peer_ht_caps; 5997 __le32 peer_max_mpdu; 5998 __le32 peer_mpdu_density; /* 0..16 */ 5999 __le32 peer_rate_caps; 6000 struct wmi_rate_set peer_legacy_rates; 6001 struct wmi_rate_set peer_ht_rates; 6002 __le32 peer_nss; /* num of spatial streams */ 6003 __le32 peer_vht_caps; 6004 __le32 peer_phymode; 6005 struct wmi_vht_rate_set peer_vht_rates; 6006 }; 6007 6008 struct wmi_main_peer_assoc_complete_cmd { 6009 struct wmi_common_peer_assoc_complete_cmd cmd; 6010 6011 /* HT Operation Element of the peer. Five bytes packed in 2 6012 * INT32 array and filled from lsb to msb. 6013 */ 6014 __le32 peer_ht_info[2]; 6015 } __packed; 6016 6017 struct wmi_10_1_peer_assoc_complete_cmd { 6018 struct wmi_common_peer_assoc_complete_cmd cmd; 6019 } __packed; 6020 6021 #define WMI_PEER_ASSOC_INFO0_MAX_MCS_IDX_LSB 0 6022 #define WMI_PEER_ASSOC_INFO0_MAX_MCS_IDX_MASK 0x0f 6023 #define WMI_PEER_ASSOC_INFO0_MAX_NSS_LSB 4 6024 #define WMI_PEER_ASSOC_INFO0_MAX_NSS_MASK 0xf0 6025 6026 struct wmi_10_2_peer_assoc_complete_cmd { 6027 struct wmi_common_peer_assoc_complete_cmd cmd; 6028 __le32 info0; /* WMI_PEER_ASSOC_INFO0_ */ 6029 } __packed; 6030 6031 struct wmi_10_4_peer_assoc_complete_cmd { 6032 struct wmi_10_2_peer_assoc_complete_cmd cmd; 6033 __le32 peer_bw_rxnss_override; 6034 } __packed; 6035 6036 struct wmi_peer_assoc_complete_arg { 6037 u8 addr[ETH_ALEN]; 6038 u32 vdev_id; 6039 bool peer_reassoc; 6040 u16 peer_aid; 6041 u32 peer_flags; /* see %WMI_PEER_ */ 6042 u16 peer_caps; 6043 u32 peer_listen_intval; 6044 u32 peer_ht_caps; 6045 u32 peer_max_mpdu; 6046 u32 peer_mpdu_density; /* 0..16 */ 6047 u32 peer_rate_caps; /* see %WMI_RC_ */ 6048 struct wmi_rate_set_arg peer_legacy_rates; 6049 struct wmi_rate_set_arg peer_ht_rates; 6050 u32 peer_num_spatial_streams; 6051 u32 peer_vht_caps; 6052 enum wmi_phy_mode peer_phymode; 6053 struct wmi_vht_rate_set_arg peer_vht_rates; 6054 }; 6055 6056 struct wmi_peer_add_wds_entry_cmd { 6057 /* peer MAC address */ 6058 struct wmi_mac_addr peer_macaddr; 6059 /* wds MAC addr */ 6060 struct wmi_mac_addr wds_macaddr; 6061 } __packed; 6062 6063 struct wmi_peer_remove_wds_entry_cmd { 6064 /* wds MAC addr */ 6065 struct wmi_mac_addr wds_macaddr; 6066 } __packed; 6067 6068 struct wmi_peer_q_empty_callback_event { 6069 /* peer MAC address */ 6070 struct wmi_mac_addr peer_macaddr; 6071 } __packed; 6072 6073 /* 6074 * Channel info WMI event 6075 */ 6076 struct wmi_chan_info_event { 6077 __le32 err_code; 6078 __le32 freq; 6079 __le32 cmd_flags; 6080 __le32 noise_floor; 6081 __le32 rx_clear_count; 6082 __le32 cycle_count; 6083 } __packed; 6084 6085 struct wmi_10_4_chan_info_event { 6086 __le32 err_code; 6087 __le32 freq; 6088 __le32 cmd_flags; 6089 __le32 noise_floor; 6090 __le32 rx_clear_count; 6091 __le32 cycle_count; 6092 __le32 chan_tx_pwr_range; 6093 __le32 chan_tx_pwr_tp; 6094 __le32 rx_frame_count; 6095 } __packed; 6096 6097 struct wmi_peer_sta_kickout_event { 6098 struct wmi_mac_addr peer_macaddr; 6099 } __packed; 6100 6101 #define WMI_CHAN_INFO_FLAG_COMPLETE BIT(0) 6102 #define WMI_CHAN_INFO_FLAG_PRE_COMPLETE BIT(1) 6103 6104 /* Beacon filter wmi command info */ 6105 #define BCN_FLT_MAX_SUPPORTED_IES 256 6106 #define BCN_FLT_MAX_ELEMS_IE_LIST (BCN_FLT_MAX_SUPPORTED_IES / 32) 6107 6108 struct bss_bcn_stats { 6109 __le32 vdev_id; 6110 __le32 bss_bcnsdropped; 6111 __le32 bss_bcnsdelivered; 6112 } __packed; 6113 6114 struct bcn_filter_stats { 6115 __le32 bcns_dropped; 6116 __le32 bcns_delivered; 6117 __le32 activefilters; 6118 struct bss_bcn_stats bss_stats; 6119 } __packed; 6120 6121 struct wmi_add_bcn_filter_cmd { 6122 u32 vdev_id; 6123 u32 ie_map[BCN_FLT_MAX_ELEMS_IE_LIST]; 6124 } __packed; 6125 6126 enum wmi_sta_keepalive_method { 6127 WMI_STA_KEEPALIVE_METHOD_NULL_FRAME = 1, 6128 WMI_STA_KEEPALIVE_METHOD_UNSOLICITATED_ARP_RESPONSE = 2, 6129 }; 6130 6131 #define WMI_STA_KEEPALIVE_INTERVAL_DISABLE 0 6132 6133 /* Firmware crashes if keepalive interval exceeds this limit */ 6134 #define WMI_STA_KEEPALIVE_INTERVAL_MAX_SECONDS 0xffff 6135 6136 /* note: ip4 addresses are in network byte order, i.e. big endian */ 6137 struct wmi_sta_keepalive_arp_resp { 6138 __be32 src_ip4_addr; 6139 __be32 dest_ip4_addr; 6140 struct wmi_mac_addr dest_mac_addr; 6141 } __packed; 6142 6143 struct wmi_sta_keepalive_cmd { 6144 __le32 vdev_id; 6145 __le32 enabled; 6146 __le32 method; /* WMI_STA_KEEPALIVE_METHOD_ */ 6147 __le32 interval; /* in seconds */ 6148 struct wmi_sta_keepalive_arp_resp arp_resp; 6149 } __packed; 6150 6151 struct wmi_sta_keepalive_arg { 6152 u32 vdev_id; 6153 u32 enabled; 6154 u32 method; 6155 u32 interval; 6156 __be32 src_ip4_addr; 6157 __be32 dest_ip4_addr; 6158 const u8 dest_mac_addr[ETH_ALEN]; 6159 }; 6160 6161 enum wmi_force_fw_hang_type { 6162 WMI_FORCE_FW_HANG_ASSERT = 1, 6163 WMI_FORCE_FW_HANG_NO_DETECT, 6164 WMI_FORCE_FW_HANG_CTRL_EP_FULL, 6165 WMI_FORCE_FW_HANG_EMPTY_POINT, 6166 WMI_FORCE_FW_HANG_STACK_OVERFLOW, 6167 WMI_FORCE_FW_HANG_INFINITE_LOOP, 6168 }; 6169 6170 #define WMI_FORCE_FW_HANG_RANDOM_TIME 0xFFFFFFFF 6171 6172 struct wmi_force_fw_hang_cmd { 6173 __le32 type; 6174 __le32 delay_ms; 6175 } __packed; 6176 6177 enum ath10k_dbglog_level { 6178 ATH10K_DBGLOG_LEVEL_VERBOSE = 0, 6179 ATH10K_DBGLOG_LEVEL_INFO = 1, 6180 ATH10K_DBGLOG_LEVEL_WARN = 2, 6181 ATH10K_DBGLOG_LEVEL_ERR = 3, 6182 }; 6183 6184 /* VAP ids to enable dbglog */ 6185 #define ATH10K_DBGLOG_CFG_VAP_LOG_LSB 0 6186 #define ATH10K_DBGLOG_CFG_VAP_LOG_MASK 0x0000ffff 6187 6188 /* to enable dbglog in the firmware */ 6189 #define ATH10K_DBGLOG_CFG_REPORTING_ENABLE_LSB 16 6190 #define ATH10K_DBGLOG_CFG_REPORTING_ENABLE_MASK 0x00010000 6191 6192 /* timestamp resolution */ 6193 #define ATH10K_DBGLOG_CFG_RESOLUTION_LSB 17 6194 #define ATH10K_DBGLOG_CFG_RESOLUTION_MASK 0x000E0000 6195 6196 /* number of queued messages before sending them to the host */ 6197 #define ATH10K_DBGLOG_CFG_REPORT_SIZE_LSB 20 6198 #define ATH10K_DBGLOG_CFG_REPORT_SIZE_MASK 0x0ff00000 6199 6200 /* 6201 * Log levels to enable. This defines the minimum level to enable, this is 6202 * not a bitmask. See enum ath10k_dbglog_level for the values. 6203 */ 6204 #define ATH10K_DBGLOG_CFG_LOG_LVL_LSB 28 6205 #define ATH10K_DBGLOG_CFG_LOG_LVL_MASK 0x70000000 6206 6207 /* 6208 * Note: this is a cleaned up version of a struct firmware uses. For 6209 * example, config_valid was hidden inside an array. 6210 */ 6211 struct wmi_dbglog_cfg_cmd { 6212 /* bitmask to hold mod id config*/ 6213 __le32 module_enable; 6214 6215 /* see ATH10K_DBGLOG_CFG_ */ 6216 __le32 config_enable; 6217 6218 /* mask of module id bits to be changed */ 6219 __le32 module_valid; 6220 6221 /* mask of config bits to be changed, see ATH10K_DBGLOG_CFG_ */ 6222 __le32 config_valid; 6223 } __packed; 6224 6225 struct wmi_10_4_dbglog_cfg_cmd { 6226 /* bitmask to hold mod id config*/ 6227 __le64 module_enable; 6228 6229 /* see ATH10K_DBGLOG_CFG_ */ 6230 __le32 config_enable; 6231 6232 /* mask of module id bits to be changed */ 6233 __le64 module_valid; 6234 6235 /* mask of config bits to be changed, see ATH10K_DBGLOG_CFG_ */ 6236 __le32 config_valid; 6237 } __packed; 6238 6239 enum wmi_roam_reason { 6240 WMI_ROAM_REASON_BETTER_AP = 1, 6241 WMI_ROAM_REASON_BEACON_MISS = 2, 6242 WMI_ROAM_REASON_LOW_RSSI = 3, 6243 WMI_ROAM_REASON_SUITABLE_AP_FOUND = 4, 6244 WMI_ROAM_REASON_HO_FAILED = 5, 6245 6246 /* keep last */ 6247 WMI_ROAM_REASON_MAX, 6248 }; 6249 6250 struct wmi_roam_ev { 6251 __le32 vdev_id; 6252 __le32 reason; 6253 } __packed; 6254 6255 #define ATH10K_FRAGMT_THRESHOLD_MIN 540 6256 #define ATH10K_FRAGMT_THRESHOLD_MAX 2346 6257 6258 #define WMI_MAX_EVENT 0x1000 6259 /* Maximum number of pending TXed WMI packets */ 6260 #define WMI_SKB_HEADROOM sizeof(struct wmi_cmd_hdr) 6261 6262 /* By default disable power save for IBSS */ 6263 #define ATH10K_DEFAULT_ATIM 0 6264 6265 #define WMI_MAX_MEM_REQS 16 6266 6267 struct wmi_scan_ev_arg { 6268 __le32 event_type; /* %WMI_SCAN_EVENT_ */ 6269 __le32 reason; /* %WMI_SCAN_REASON_ */ 6270 __le32 channel_freq; /* only valid for WMI_SCAN_EVENT_FOREIGN_CHANNEL */ 6271 __le32 scan_req_id; 6272 __le32 scan_id; 6273 __le32 vdev_id; 6274 }; 6275 6276 struct wmi_mgmt_rx_ev_arg { 6277 __le32 channel; 6278 __le32 snr; 6279 __le32 rate; 6280 __le32 phy_mode; 6281 __le32 buf_len; 6282 __le32 status; /* %WMI_RX_STATUS_ */ 6283 struct wmi_mgmt_rx_ext_info ext_info; 6284 }; 6285 6286 struct wmi_ch_info_ev_arg { 6287 __le32 err_code; 6288 __le32 freq; 6289 __le32 cmd_flags; 6290 __le32 noise_floor; 6291 __le32 rx_clear_count; 6292 __le32 cycle_count; 6293 __le32 chan_tx_pwr_range; 6294 __le32 chan_tx_pwr_tp; 6295 __le32 rx_frame_count; 6296 }; 6297 6298 struct wmi_vdev_start_ev_arg { 6299 __le32 vdev_id; 6300 __le32 req_id; 6301 __le32 resp_type; /* %WMI_VDEV_RESP_ */ 6302 __le32 status; 6303 }; 6304 6305 struct wmi_peer_kick_ev_arg { 6306 const u8 *mac_addr; 6307 }; 6308 6309 struct wmi_swba_ev_arg { 6310 __le32 vdev_map; 6311 struct wmi_tim_info_arg tim_info[WMI_MAX_AP_VDEV]; 6312 const struct wmi_p2p_noa_info *noa_info[WMI_MAX_AP_VDEV]; 6313 }; 6314 6315 struct wmi_phyerr_ev_arg { 6316 u32 tsf_timestamp; 6317 u16 freq1; 6318 u16 freq2; 6319 u8 rssi_combined; 6320 u8 chan_width_mhz; 6321 u8 phy_err_code; 6322 u16 nf_chains[4]; 6323 u32 buf_len; 6324 const u8 *buf; 6325 u8 hdr_len; 6326 }; 6327 6328 struct wmi_phyerr_hdr_arg { 6329 u32 num_phyerrs; 6330 u32 tsf_l32; 6331 u32 tsf_u32; 6332 u32 buf_len; 6333 const void *phyerrs; 6334 }; 6335 6336 struct wmi_svc_rdy_ev_arg { 6337 __le32 min_tx_power; 6338 __le32 max_tx_power; 6339 __le32 ht_cap; 6340 __le32 vht_cap; 6341 __le32 sw_ver0; 6342 __le32 sw_ver1; 6343 __le32 fw_build; 6344 __le32 phy_capab; 6345 __le32 num_rf_chains; 6346 __le32 eeprom_rd; 6347 __le32 num_mem_reqs; 6348 __le32 low_5ghz_chan; 6349 __le32 high_5ghz_chan; 6350 const __le32 *service_map; 6351 size_t service_map_len; 6352 const struct wlan_host_mem_req *mem_reqs[WMI_MAX_MEM_REQS]; 6353 }; 6354 6355 struct wmi_rdy_ev_arg { 6356 __le32 sw_version; 6357 __le32 abi_version; 6358 __le32 status; 6359 const u8 *mac_addr; 6360 }; 6361 6362 struct wmi_roam_ev_arg { 6363 __le32 vdev_id; 6364 __le32 reason; 6365 __le32 rssi; 6366 }; 6367 6368 struct wmi_echo_ev_arg { 6369 __le32 value; 6370 }; 6371 6372 struct wmi_pdev_temperature_event { 6373 /* temperature value in Celcius degree */ 6374 __le32 temperature; 6375 } __packed; 6376 6377 struct wmi_pdev_bss_chan_info_event { 6378 __le32 freq; 6379 __le32 noise_floor; 6380 __le64 cycle_busy; 6381 __le64 cycle_total; 6382 __le64 cycle_tx; 6383 __le64 cycle_rx; 6384 __le64 cycle_rx_bss; 6385 __le32 reserved; 6386 } __packed; 6387 6388 /* WOW structures */ 6389 enum wmi_wow_wakeup_event { 6390 WOW_BMISS_EVENT = 0, 6391 WOW_BETTER_AP_EVENT, 6392 WOW_DEAUTH_RECVD_EVENT, 6393 WOW_MAGIC_PKT_RECVD_EVENT, 6394 WOW_GTK_ERR_EVENT, 6395 WOW_FOURWAY_HSHAKE_EVENT, 6396 WOW_EAPOL_RECVD_EVENT, 6397 WOW_NLO_DETECTED_EVENT, 6398 WOW_DISASSOC_RECVD_EVENT, 6399 WOW_PATTERN_MATCH_EVENT, 6400 WOW_CSA_IE_EVENT, 6401 WOW_PROBE_REQ_WPS_IE_EVENT, 6402 WOW_AUTH_REQ_EVENT, 6403 WOW_ASSOC_REQ_EVENT, 6404 WOW_HTT_EVENT, 6405 WOW_RA_MATCH_EVENT, 6406 WOW_HOST_AUTO_SHUTDOWN_EVENT, 6407 WOW_IOAC_MAGIC_EVENT, 6408 WOW_IOAC_SHORT_EVENT, 6409 WOW_IOAC_EXTEND_EVENT, 6410 WOW_IOAC_TIMER_EVENT, 6411 WOW_DFS_PHYERR_RADAR_EVENT, 6412 WOW_BEACON_EVENT, 6413 WOW_CLIENT_KICKOUT_EVENT, 6414 WOW_EVENT_MAX, 6415 }; 6416 6417 #define C2S(x) case x: return #x 6418 6419 static inline const char *wow_wakeup_event(enum wmi_wow_wakeup_event ev) 6420 { 6421 switch (ev) { 6422 C2S(WOW_BMISS_EVENT); 6423 C2S(WOW_BETTER_AP_EVENT); 6424 C2S(WOW_DEAUTH_RECVD_EVENT); 6425 C2S(WOW_MAGIC_PKT_RECVD_EVENT); 6426 C2S(WOW_GTK_ERR_EVENT); 6427 C2S(WOW_FOURWAY_HSHAKE_EVENT); 6428 C2S(WOW_EAPOL_RECVD_EVENT); 6429 C2S(WOW_NLO_DETECTED_EVENT); 6430 C2S(WOW_DISASSOC_RECVD_EVENT); 6431 C2S(WOW_PATTERN_MATCH_EVENT); 6432 C2S(WOW_CSA_IE_EVENT); 6433 C2S(WOW_PROBE_REQ_WPS_IE_EVENT); 6434 C2S(WOW_AUTH_REQ_EVENT); 6435 C2S(WOW_ASSOC_REQ_EVENT); 6436 C2S(WOW_HTT_EVENT); 6437 C2S(WOW_RA_MATCH_EVENT); 6438 C2S(WOW_HOST_AUTO_SHUTDOWN_EVENT); 6439 C2S(WOW_IOAC_MAGIC_EVENT); 6440 C2S(WOW_IOAC_SHORT_EVENT); 6441 C2S(WOW_IOAC_EXTEND_EVENT); 6442 C2S(WOW_IOAC_TIMER_EVENT); 6443 C2S(WOW_DFS_PHYERR_RADAR_EVENT); 6444 C2S(WOW_BEACON_EVENT); 6445 C2S(WOW_CLIENT_KICKOUT_EVENT); 6446 C2S(WOW_EVENT_MAX); 6447 default: 6448 return NULL; 6449 } 6450 } 6451 6452 enum wmi_wow_wake_reason { 6453 WOW_REASON_UNSPECIFIED = -1, 6454 WOW_REASON_NLOD = 0, 6455 WOW_REASON_AP_ASSOC_LOST, 6456 WOW_REASON_LOW_RSSI, 6457 WOW_REASON_DEAUTH_RECVD, 6458 WOW_REASON_DISASSOC_RECVD, 6459 WOW_REASON_GTK_HS_ERR, 6460 WOW_REASON_EAP_REQ, 6461 WOW_REASON_FOURWAY_HS_RECV, 6462 WOW_REASON_TIMER_INTR_RECV, 6463 WOW_REASON_PATTERN_MATCH_FOUND, 6464 WOW_REASON_RECV_MAGIC_PATTERN, 6465 WOW_REASON_P2P_DISC, 6466 WOW_REASON_WLAN_HB, 6467 WOW_REASON_CSA_EVENT, 6468 WOW_REASON_PROBE_REQ_WPS_IE_RECV, 6469 WOW_REASON_AUTH_REQ_RECV, 6470 WOW_REASON_ASSOC_REQ_RECV, 6471 WOW_REASON_HTT_EVENT, 6472 WOW_REASON_RA_MATCH, 6473 WOW_REASON_HOST_AUTO_SHUTDOWN, 6474 WOW_REASON_IOAC_MAGIC_EVENT, 6475 WOW_REASON_IOAC_SHORT_EVENT, 6476 WOW_REASON_IOAC_EXTEND_EVENT, 6477 WOW_REASON_IOAC_TIMER_EVENT, 6478 WOW_REASON_ROAM_HO, 6479 WOW_REASON_DFS_PHYERR_RADADR_EVENT, 6480 WOW_REASON_BEACON_RECV, 6481 WOW_REASON_CLIENT_KICKOUT_EVENT, 6482 WOW_REASON_DEBUG_TEST = 0xFF, 6483 }; 6484 6485 static inline const char *wow_reason(enum wmi_wow_wake_reason reason) 6486 { 6487 switch (reason) { 6488 C2S(WOW_REASON_UNSPECIFIED); 6489 C2S(WOW_REASON_NLOD); 6490 C2S(WOW_REASON_AP_ASSOC_LOST); 6491 C2S(WOW_REASON_LOW_RSSI); 6492 C2S(WOW_REASON_DEAUTH_RECVD); 6493 C2S(WOW_REASON_DISASSOC_RECVD); 6494 C2S(WOW_REASON_GTK_HS_ERR); 6495 C2S(WOW_REASON_EAP_REQ); 6496 C2S(WOW_REASON_FOURWAY_HS_RECV); 6497 C2S(WOW_REASON_TIMER_INTR_RECV); 6498 C2S(WOW_REASON_PATTERN_MATCH_FOUND); 6499 C2S(WOW_REASON_RECV_MAGIC_PATTERN); 6500 C2S(WOW_REASON_P2P_DISC); 6501 C2S(WOW_REASON_WLAN_HB); 6502 C2S(WOW_REASON_CSA_EVENT); 6503 C2S(WOW_REASON_PROBE_REQ_WPS_IE_RECV); 6504 C2S(WOW_REASON_AUTH_REQ_RECV); 6505 C2S(WOW_REASON_ASSOC_REQ_RECV); 6506 C2S(WOW_REASON_HTT_EVENT); 6507 C2S(WOW_REASON_RA_MATCH); 6508 C2S(WOW_REASON_HOST_AUTO_SHUTDOWN); 6509 C2S(WOW_REASON_IOAC_MAGIC_EVENT); 6510 C2S(WOW_REASON_IOAC_SHORT_EVENT); 6511 C2S(WOW_REASON_IOAC_EXTEND_EVENT); 6512 C2S(WOW_REASON_IOAC_TIMER_EVENT); 6513 C2S(WOW_REASON_ROAM_HO); 6514 C2S(WOW_REASON_DFS_PHYERR_RADADR_EVENT); 6515 C2S(WOW_REASON_BEACON_RECV); 6516 C2S(WOW_REASON_CLIENT_KICKOUT_EVENT); 6517 C2S(WOW_REASON_DEBUG_TEST); 6518 default: 6519 return NULL; 6520 } 6521 } 6522 6523 #undef C2S 6524 6525 struct wmi_wow_ev_arg { 6526 u32 vdev_id; 6527 u32 flag; 6528 enum wmi_wow_wake_reason wake_reason; 6529 u32 data_len; 6530 }; 6531 6532 #define WOW_MIN_PATTERN_SIZE 1 6533 #define WOW_MAX_PATTERN_SIZE 148 6534 #define WOW_MAX_PKT_OFFSET 128 6535 6536 enum wmi_tdls_state { 6537 WMI_TDLS_DISABLE, 6538 WMI_TDLS_ENABLE_PASSIVE, 6539 WMI_TDLS_ENABLE_ACTIVE, 6540 }; 6541 6542 enum wmi_tdls_peer_state { 6543 WMI_TDLS_PEER_STATE_PEERING, 6544 WMI_TDLS_PEER_STATE_CONNECTED, 6545 WMI_TDLS_PEER_STATE_TEARDOWN, 6546 }; 6547 6548 struct wmi_tdls_peer_update_cmd_arg { 6549 u32 vdev_id; 6550 enum wmi_tdls_peer_state peer_state; 6551 u8 addr[ETH_ALEN]; 6552 }; 6553 6554 #define WMI_TDLS_MAX_SUPP_OPER_CLASSES 32 6555 6556 struct wmi_tdls_peer_capab_arg { 6557 u8 peer_uapsd_queues; 6558 u8 peer_max_sp; 6559 u32 buff_sta_support; 6560 u32 off_chan_support; 6561 u32 peer_curr_operclass; 6562 u32 self_curr_operclass; 6563 u32 peer_chan_len; 6564 u32 peer_operclass_len; 6565 u8 peer_operclass[WMI_TDLS_MAX_SUPP_OPER_CLASSES]; 6566 u32 is_peer_responder; 6567 u32 pref_offchan_num; 6568 u32 pref_offchan_bw; 6569 }; 6570 6571 enum wmi_txbf_conf { 6572 WMI_TXBF_CONF_UNSUPPORTED, 6573 WMI_TXBF_CONF_BEFORE_ASSOC, 6574 WMI_TXBF_CONF_AFTER_ASSOC, 6575 }; 6576 6577 #define WMI_CCA_DETECT_LEVEL_AUTO 0 6578 #define WMI_CCA_DETECT_MARGIN_AUTO 0 6579 6580 struct wmi_pdev_set_adaptive_cca_params { 6581 __le32 enable; 6582 __le32 cca_detect_level; 6583 __le32 cca_detect_margin; 6584 } __packed; 6585 6586 enum wmi_host_platform_type { 6587 WMI_HOST_PLATFORM_HIGH_PERF, 6588 WMI_HOST_PLATFORM_LOW_PERF, 6589 }; 6590 6591 enum wmi_bss_survey_req_type { 6592 WMI_BSS_SURVEY_REQ_TYPE_READ = 1, 6593 WMI_BSS_SURVEY_REQ_TYPE_READ_CLEAR, 6594 }; 6595 6596 struct wmi_pdev_chan_info_req_cmd { 6597 __le32 type; 6598 __le32 reserved; 6599 } __packed; 6600 6601 struct ath10k; 6602 struct ath10k_vif; 6603 struct ath10k_fw_stats_pdev; 6604 struct ath10k_fw_stats_peer; 6605 struct ath10k_fw_stats; 6606 6607 int ath10k_wmi_attach(struct ath10k *ar); 6608 void ath10k_wmi_detach(struct ath10k *ar); 6609 void ath10k_wmi_free_host_mem(struct ath10k *ar); 6610 int ath10k_wmi_wait_for_service_ready(struct ath10k *ar); 6611 int ath10k_wmi_wait_for_unified_ready(struct ath10k *ar); 6612 6613 struct sk_buff *ath10k_wmi_alloc_skb(struct ath10k *ar, u32 len); 6614 int ath10k_wmi_connect(struct ath10k *ar); 6615 6616 struct sk_buff *ath10k_wmi_alloc_skb(struct ath10k *ar, u32 len); 6617 int ath10k_wmi_cmd_send(struct ath10k *ar, struct sk_buff *skb, u32 cmd_id); 6618 int ath10k_wmi_cmd_send_nowait(struct ath10k *ar, struct sk_buff *skb, 6619 u32 cmd_id); 6620 void ath10k_wmi_start_scan_init(struct ath10k *ar, struct wmi_start_scan_arg *arg); 6621 6622 void ath10k_wmi_pull_pdev_stats_base(const struct wmi_pdev_stats_base *src, 6623 struct ath10k_fw_stats_pdev *dst); 6624 void ath10k_wmi_pull_pdev_stats_tx(const struct wmi_pdev_stats_tx *src, 6625 struct ath10k_fw_stats_pdev *dst); 6626 void ath10k_wmi_pull_pdev_stats_rx(const struct wmi_pdev_stats_rx *src, 6627 struct ath10k_fw_stats_pdev *dst); 6628 void ath10k_wmi_pull_pdev_stats_extra(const struct wmi_pdev_stats_extra *src, 6629 struct ath10k_fw_stats_pdev *dst); 6630 void ath10k_wmi_pull_peer_stats(const struct wmi_peer_stats *src, 6631 struct ath10k_fw_stats_peer *dst); 6632 void ath10k_wmi_put_host_mem_chunks(struct ath10k *ar, 6633 struct wmi_host_mem_chunks *chunks); 6634 void ath10k_wmi_put_start_scan_common(struct wmi_start_scan_common *cmn, 6635 const struct wmi_start_scan_arg *arg); 6636 void ath10k_wmi_set_wmm_param(struct wmi_wmm_params *params, 6637 const struct wmi_wmm_params_arg *arg); 6638 void ath10k_wmi_put_wmi_channel(struct wmi_channel *ch, 6639 const struct wmi_channel_arg *arg); 6640 int ath10k_wmi_start_scan_verify(const struct wmi_start_scan_arg *arg); 6641 6642 int ath10k_wmi_event_scan(struct ath10k *ar, struct sk_buff *skb); 6643 int ath10k_wmi_event_mgmt_rx(struct ath10k *ar, struct sk_buff *skb); 6644 void ath10k_wmi_event_chan_info(struct ath10k *ar, struct sk_buff *skb); 6645 void ath10k_wmi_event_echo(struct ath10k *ar, struct sk_buff *skb); 6646 int ath10k_wmi_event_debug_mesg(struct ath10k *ar, struct sk_buff *skb); 6647 void ath10k_wmi_event_update_stats(struct ath10k *ar, struct sk_buff *skb); 6648 void ath10k_wmi_event_vdev_start_resp(struct ath10k *ar, struct sk_buff *skb); 6649 void ath10k_wmi_event_vdev_stopped(struct ath10k *ar, struct sk_buff *skb); 6650 void ath10k_wmi_event_peer_sta_kickout(struct ath10k *ar, struct sk_buff *skb); 6651 void ath10k_wmi_event_host_swba(struct ath10k *ar, struct sk_buff *skb); 6652 void ath10k_wmi_event_tbttoffset_update(struct ath10k *ar, struct sk_buff *skb); 6653 void ath10k_wmi_event_dfs(struct ath10k *ar, 6654 struct wmi_phyerr_ev_arg *phyerr, u64 tsf); 6655 void ath10k_wmi_event_spectral_scan(struct ath10k *ar, 6656 struct wmi_phyerr_ev_arg *phyerr, 6657 u64 tsf); 6658 void ath10k_wmi_event_phyerr(struct ath10k *ar, struct sk_buff *skb); 6659 void ath10k_wmi_event_roam(struct ath10k *ar, struct sk_buff *skb); 6660 void ath10k_wmi_event_profile_match(struct ath10k *ar, struct sk_buff *skb); 6661 void ath10k_wmi_event_debug_print(struct ath10k *ar, struct sk_buff *skb); 6662 void ath10k_wmi_event_pdev_qvit(struct ath10k *ar, struct sk_buff *skb); 6663 void ath10k_wmi_event_wlan_profile_data(struct ath10k *ar, struct sk_buff *skb); 6664 void ath10k_wmi_event_rtt_measurement_report(struct ath10k *ar, 6665 struct sk_buff *skb); 6666 void ath10k_wmi_event_tsf_measurement_report(struct ath10k *ar, 6667 struct sk_buff *skb); 6668 void ath10k_wmi_event_rtt_error_report(struct ath10k *ar, struct sk_buff *skb); 6669 void ath10k_wmi_event_wow_wakeup_host(struct ath10k *ar, struct sk_buff *skb); 6670 void ath10k_wmi_event_dcs_interference(struct ath10k *ar, struct sk_buff *skb); 6671 void ath10k_wmi_event_pdev_tpc_config(struct ath10k *ar, struct sk_buff *skb); 6672 void ath10k_wmi_event_pdev_ftm_intg(struct ath10k *ar, struct sk_buff *skb); 6673 void ath10k_wmi_event_gtk_offload_status(struct ath10k *ar, 6674 struct sk_buff *skb); 6675 void ath10k_wmi_event_gtk_rekey_fail(struct ath10k *ar, struct sk_buff *skb); 6676 void ath10k_wmi_event_delba_complete(struct ath10k *ar, struct sk_buff *skb); 6677 void ath10k_wmi_event_addba_complete(struct ath10k *ar, struct sk_buff *skb); 6678 void ath10k_wmi_event_vdev_install_key_complete(struct ath10k *ar, 6679 struct sk_buff *skb); 6680 void ath10k_wmi_event_inst_rssi_stats(struct ath10k *ar, struct sk_buff *skb); 6681 void ath10k_wmi_event_vdev_standby_req(struct ath10k *ar, struct sk_buff *skb); 6682 void ath10k_wmi_event_vdev_resume_req(struct ath10k *ar, struct sk_buff *skb); 6683 void ath10k_wmi_event_service_ready(struct ath10k *ar, struct sk_buff *skb); 6684 int ath10k_wmi_event_ready(struct ath10k *ar, struct sk_buff *skb); 6685 int ath10k_wmi_op_pull_phyerr_ev(struct ath10k *ar, const void *phyerr_buf, 6686 int left_len, struct wmi_phyerr_ev_arg *arg); 6687 void ath10k_wmi_main_op_fw_stats_fill(struct ath10k *ar, 6688 struct ath10k_fw_stats *fw_stats, 6689 char *buf); 6690 void ath10k_wmi_10x_op_fw_stats_fill(struct ath10k *ar, 6691 struct ath10k_fw_stats *fw_stats, 6692 char *buf); 6693 size_t ath10k_wmi_fw_stats_num_peers(struct list_head *head); 6694 size_t ath10k_wmi_fw_stats_num_vdevs(struct list_head *head); 6695 void ath10k_wmi_10_4_op_fw_stats_fill(struct ath10k *ar, 6696 struct ath10k_fw_stats *fw_stats, 6697 char *buf); 6698 int ath10k_wmi_op_get_vdev_subtype(struct ath10k *ar, 6699 enum wmi_vdev_subtype subtype); 6700 int ath10k_wmi_barrier(struct ath10k *ar); 6701 6702 #endif /* _WMI_H_ */ 6703