1 /* SPDX-License-Identifier: ISC */ 2 /* 3 * Copyright (c) 2005-2011 Atheros Communications Inc. 4 * Copyright (c) 2011-2017 Qualcomm Atheros, Inc. 5 * Copyright (c) 2018, The Linux Foundation. All rights reserved. 6 */ 7 8 #ifndef _WMI_H_ 9 #define _WMI_H_ 10 11 #include <linux/types.h> 12 #include <linux/ieee80211.h> 13 14 /* 15 * This file specifies the WMI interface for the Unified Software 16 * Architecture. 17 * 18 * It includes definitions of all the commands and events. Commands are 19 * messages from the host to the target. Events and Replies are messages 20 * from the target to the host. 21 * 22 * Ownership of correctness in regards to WMI commands belongs to the host 23 * driver and the target is not required to validate parameters for value, 24 * proper range, or any other checking. 25 * 26 * Guidelines for extending this interface are below. 27 * 28 * 1. Add new WMI commands ONLY within the specified range - 0x9000 - 0x9fff 29 * 30 * 2. Use ONLY u32 type for defining member variables within WMI 31 * command/event structures. Do not use u8, u16, bool or 32 * enum types within these structures. 33 * 34 * 3. DO NOT define bit fields within structures. Implement bit fields 35 * using masks if necessary. Do not use the programming language's bit 36 * field definition. 37 * 38 * 4. Define macros for encode/decode of u8, u16 fields within 39 * the u32 variables. Use these macros for set/get of these fields. 40 * Try to use this to optimize the structure without bloating it with 41 * u32 variables for every lower sized field. 42 * 43 * 5. Do not use PACK/UNPACK attributes for the structures as each member 44 * variable is already 4-byte aligned by virtue of being a u32 45 * type. 46 * 47 * 6. Comment each parameter part of the WMI command/event structure by 48 * using the 2 stars at the beginning of C comment instead of one star to 49 * enable HTML document generation using Doxygen. 50 * 51 */ 52 53 /* Control Path */ 54 struct wmi_cmd_hdr { 55 __le32 cmd_id; 56 } __packed; 57 58 #define WMI_CMD_HDR_CMD_ID_MASK 0x00FFFFFF 59 #define WMI_CMD_HDR_CMD_ID_LSB 0 60 #define WMI_CMD_HDR_PLT_PRIV_MASK 0xFF000000 61 #define WMI_CMD_HDR_PLT_PRIV_LSB 24 62 63 #define HTC_PROTOCOL_VERSION 0x0002 64 #define WMI_PROTOCOL_VERSION 0x0002 65 66 /* 67 * There is no signed version of __le32, so for a temporary solution come 68 * up with our own version. The idea is from fs/ntfs/endian.h. 69 * 70 * Use a_ prefix so that it doesn't conflict if we get proper support to 71 * linux/types.h. 72 */ 73 typedef __s32 __bitwise a_sle32; 74 75 static inline a_sle32 a_cpu_to_sle32(s32 val) 76 { 77 return (__force a_sle32)cpu_to_le32(val); 78 } 79 80 static inline s32 a_sle32_to_cpu(a_sle32 val) 81 { 82 return le32_to_cpu((__force __le32)val); 83 } 84 85 enum wmi_service { 86 WMI_SERVICE_BEACON_OFFLOAD = 0, 87 WMI_SERVICE_SCAN_OFFLOAD, 88 WMI_SERVICE_ROAM_OFFLOAD, 89 WMI_SERVICE_BCN_MISS_OFFLOAD, 90 WMI_SERVICE_STA_PWRSAVE, 91 WMI_SERVICE_STA_ADVANCED_PWRSAVE, 92 WMI_SERVICE_AP_UAPSD, 93 WMI_SERVICE_AP_DFS, 94 WMI_SERVICE_11AC, 95 WMI_SERVICE_BLOCKACK, 96 WMI_SERVICE_PHYERR, 97 WMI_SERVICE_BCN_FILTER, 98 WMI_SERVICE_RTT, 99 WMI_SERVICE_RATECTRL, 100 WMI_SERVICE_WOW, 101 WMI_SERVICE_RATECTRL_CACHE, 102 WMI_SERVICE_IRAM_TIDS, 103 WMI_SERVICE_ARPNS_OFFLOAD, 104 WMI_SERVICE_NLO, 105 WMI_SERVICE_GTK_OFFLOAD, 106 WMI_SERVICE_SCAN_SCH, 107 WMI_SERVICE_CSA_OFFLOAD, 108 WMI_SERVICE_CHATTER, 109 WMI_SERVICE_COEX_FREQAVOID, 110 WMI_SERVICE_PACKET_POWER_SAVE, 111 WMI_SERVICE_FORCE_FW_HANG, 112 WMI_SERVICE_GPIO, 113 WMI_SERVICE_STA_DTIM_PS_MODULATED_DTIM, 114 WMI_SERVICE_STA_UAPSD_BASIC_AUTO_TRIG, 115 WMI_SERVICE_STA_UAPSD_VAR_AUTO_TRIG, 116 WMI_SERVICE_STA_KEEP_ALIVE, 117 WMI_SERVICE_TX_ENCAP, 118 WMI_SERVICE_BURST, 119 WMI_SERVICE_SMART_ANTENNA_SW_SUPPORT, 120 WMI_SERVICE_SMART_ANTENNA_HW_SUPPORT, 121 WMI_SERVICE_ROAM_SCAN_OFFLOAD, 122 WMI_SERVICE_AP_PS_DETECT_OUT_OF_SYNC, 123 WMI_SERVICE_EARLY_RX, 124 WMI_SERVICE_STA_SMPS, 125 WMI_SERVICE_FWTEST, 126 WMI_SERVICE_STA_WMMAC, 127 WMI_SERVICE_TDLS, 128 WMI_SERVICE_MCC_BCN_INTERVAL_CHANGE, 129 WMI_SERVICE_ADAPTIVE_OCS, 130 WMI_SERVICE_BA_SSN_SUPPORT, 131 WMI_SERVICE_FILTER_IPSEC_NATKEEPALIVE, 132 WMI_SERVICE_WLAN_HB, 133 WMI_SERVICE_LTE_ANT_SHARE_SUPPORT, 134 WMI_SERVICE_BATCH_SCAN, 135 WMI_SERVICE_QPOWER, 136 WMI_SERVICE_PLMREQ, 137 WMI_SERVICE_THERMAL_MGMT, 138 WMI_SERVICE_RMC, 139 WMI_SERVICE_MHF_OFFLOAD, 140 WMI_SERVICE_COEX_SAR, 141 WMI_SERVICE_BCN_TXRATE_OVERRIDE, 142 WMI_SERVICE_NAN, 143 WMI_SERVICE_L1SS_STAT, 144 WMI_SERVICE_ESTIMATE_LINKSPEED, 145 WMI_SERVICE_OBSS_SCAN, 146 WMI_SERVICE_TDLS_OFFCHAN, 147 WMI_SERVICE_TDLS_UAPSD_BUFFER_STA, 148 WMI_SERVICE_TDLS_UAPSD_SLEEP_STA, 149 WMI_SERVICE_IBSS_PWRSAVE, 150 WMI_SERVICE_LPASS, 151 WMI_SERVICE_EXTSCAN, 152 WMI_SERVICE_D0WOW, 153 WMI_SERVICE_HSOFFLOAD, 154 WMI_SERVICE_ROAM_HO_OFFLOAD, 155 WMI_SERVICE_RX_FULL_REORDER, 156 WMI_SERVICE_DHCP_OFFLOAD, 157 WMI_SERVICE_STA_RX_IPA_OFFLOAD_SUPPORT, 158 WMI_SERVICE_MDNS_OFFLOAD, 159 WMI_SERVICE_SAP_AUTH_OFFLOAD, 160 WMI_SERVICE_ATF, 161 WMI_SERVICE_COEX_GPIO, 162 WMI_SERVICE_ENHANCED_PROXY_STA, 163 WMI_SERVICE_TT, 164 WMI_SERVICE_PEER_CACHING, 165 WMI_SERVICE_AUX_SPECTRAL_INTF, 166 WMI_SERVICE_AUX_CHAN_LOAD_INTF, 167 WMI_SERVICE_BSS_CHANNEL_INFO_64, 168 WMI_SERVICE_EXT_RES_CFG_SUPPORT, 169 WMI_SERVICE_MESH_11S, 170 WMI_SERVICE_MESH_NON_11S, 171 WMI_SERVICE_PEER_STATS, 172 WMI_SERVICE_RESTRT_CHNL_SUPPORT, 173 WMI_SERVICE_PERIODIC_CHAN_STAT_SUPPORT, 174 WMI_SERVICE_TX_MODE_PUSH_ONLY, 175 WMI_SERVICE_TX_MODE_PUSH_PULL, 176 WMI_SERVICE_TX_MODE_DYNAMIC, 177 WMI_SERVICE_VDEV_RX_FILTER, 178 WMI_SERVICE_BTCOEX, 179 WMI_SERVICE_CHECK_CAL_VERSION, 180 WMI_SERVICE_DBGLOG_WARN2, 181 WMI_SERVICE_BTCOEX_DUTY_CYCLE, 182 WMI_SERVICE_4_WIRE_COEX_SUPPORT, 183 WMI_SERVICE_EXTENDED_NSS_SUPPORT, 184 WMI_SERVICE_PROG_GPIO_BAND_SELECT, 185 WMI_SERVICE_SMART_LOGGING_SUPPORT, 186 WMI_SERVICE_TDLS_CONN_TRACKER_IN_HOST_MODE, 187 WMI_SERVICE_TDLS_EXPLICIT_MODE_ONLY, 188 WMI_SERVICE_MGMT_TX_WMI, 189 WMI_SERVICE_TDLS_WIDER_BANDWIDTH, 190 WMI_SERVICE_HTT_MGMT_TX_COMP_VALID_FLAGS, 191 WMI_SERVICE_HOST_DFS_CHECK_SUPPORT, 192 WMI_SERVICE_TPC_STATS_FINAL, 193 WMI_SERVICE_RESET_CHIP, 194 WMI_SERVICE_SPOOF_MAC_SUPPORT, 195 WMI_SERVICE_TX_DATA_ACK_RSSI, 196 WMI_SERVICE_VDEV_DIFFERENT_BEACON_INTERVAL_SUPPORT, 197 WMI_SERVICE_VDEV_DISABLE_4_ADDR_SRC_LRN_SUPPORT, 198 WMI_SERVICE_BB_TIMING_CONFIG_SUPPORT, 199 WMI_SERVICE_THERM_THROT, 200 WMI_SERVICE_RTT_RESPONDER_ROLE, 201 WMI_SERVICE_PER_PACKET_SW_ENCRYPT, 202 WMI_SERVICE_REPORT_AIRTIME, 203 204 /* Remember to add the new value to wmi_service_name()! */ 205 206 /* keep last */ 207 WMI_SERVICE_MAX, 208 }; 209 210 enum wmi_10x_service { 211 WMI_10X_SERVICE_BEACON_OFFLOAD = 0, 212 WMI_10X_SERVICE_SCAN_OFFLOAD, 213 WMI_10X_SERVICE_ROAM_OFFLOAD, 214 WMI_10X_SERVICE_BCN_MISS_OFFLOAD, 215 WMI_10X_SERVICE_STA_PWRSAVE, 216 WMI_10X_SERVICE_STA_ADVANCED_PWRSAVE, 217 WMI_10X_SERVICE_AP_UAPSD, 218 WMI_10X_SERVICE_AP_DFS, 219 WMI_10X_SERVICE_11AC, 220 WMI_10X_SERVICE_BLOCKACK, 221 WMI_10X_SERVICE_PHYERR, 222 WMI_10X_SERVICE_BCN_FILTER, 223 WMI_10X_SERVICE_RTT, 224 WMI_10X_SERVICE_RATECTRL, 225 WMI_10X_SERVICE_WOW, 226 WMI_10X_SERVICE_RATECTRL_CACHE, 227 WMI_10X_SERVICE_IRAM_TIDS, 228 WMI_10X_SERVICE_BURST, 229 230 /* introduced in 10.2 */ 231 WMI_10X_SERVICE_SMART_ANTENNA_SW_SUPPORT, 232 WMI_10X_SERVICE_FORCE_FW_HANG, 233 WMI_10X_SERVICE_SMART_ANTENNA_HW_SUPPORT, 234 WMI_10X_SERVICE_ATF, 235 WMI_10X_SERVICE_COEX_GPIO, 236 WMI_10X_SERVICE_AUX_SPECTRAL_INTF, 237 WMI_10X_SERVICE_AUX_CHAN_LOAD_INTF, 238 WMI_10X_SERVICE_BSS_CHANNEL_INFO_64, 239 WMI_10X_SERVICE_MESH, 240 WMI_10X_SERVICE_EXT_RES_CFG_SUPPORT, 241 WMI_10X_SERVICE_PEER_STATS, 242 WMI_10X_SERVICE_RESET_CHIP, 243 WMI_10X_SERVICE_HTT_MGMT_TX_COMP_VALID_FLAGS, 244 WMI_10X_SERVICE_VDEV_BCN_RATE_CONTROL, 245 WMI_10X_SERVICE_PER_PACKET_SW_ENCRYPT, 246 WMI_10X_SERVICE_BB_TIMING_CONFIG_SUPPORT, 247 }; 248 249 enum wmi_main_service { 250 WMI_MAIN_SERVICE_BEACON_OFFLOAD = 0, 251 WMI_MAIN_SERVICE_SCAN_OFFLOAD, 252 WMI_MAIN_SERVICE_ROAM_OFFLOAD, 253 WMI_MAIN_SERVICE_BCN_MISS_OFFLOAD, 254 WMI_MAIN_SERVICE_STA_PWRSAVE, 255 WMI_MAIN_SERVICE_STA_ADVANCED_PWRSAVE, 256 WMI_MAIN_SERVICE_AP_UAPSD, 257 WMI_MAIN_SERVICE_AP_DFS, 258 WMI_MAIN_SERVICE_11AC, 259 WMI_MAIN_SERVICE_BLOCKACK, 260 WMI_MAIN_SERVICE_PHYERR, 261 WMI_MAIN_SERVICE_BCN_FILTER, 262 WMI_MAIN_SERVICE_RTT, 263 WMI_MAIN_SERVICE_RATECTRL, 264 WMI_MAIN_SERVICE_WOW, 265 WMI_MAIN_SERVICE_RATECTRL_CACHE, 266 WMI_MAIN_SERVICE_IRAM_TIDS, 267 WMI_MAIN_SERVICE_ARPNS_OFFLOAD, 268 WMI_MAIN_SERVICE_NLO, 269 WMI_MAIN_SERVICE_GTK_OFFLOAD, 270 WMI_MAIN_SERVICE_SCAN_SCH, 271 WMI_MAIN_SERVICE_CSA_OFFLOAD, 272 WMI_MAIN_SERVICE_CHATTER, 273 WMI_MAIN_SERVICE_COEX_FREQAVOID, 274 WMI_MAIN_SERVICE_PACKET_POWER_SAVE, 275 WMI_MAIN_SERVICE_FORCE_FW_HANG, 276 WMI_MAIN_SERVICE_GPIO, 277 WMI_MAIN_SERVICE_STA_DTIM_PS_MODULATED_DTIM, 278 WMI_MAIN_SERVICE_STA_UAPSD_BASIC_AUTO_TRIG, 279 WMI_MAIN_SERVICE_STA_UAPSD_VAR_AUTO_TRIG, 280 WMI_MAIN_SERVICE_STA_KEEP_ALIVE, 281 WMI_MAIN_SERVICE_TX_ENCAP, 282 }; 283 284 enum wmi_10_4_service { 285 WMI_10_4_SERVICE_BEACON_OFFLOAD = 0, 286 WMI_10_4_SERVICE_SCAN_OFFLOAD, 287 WMI_10_4_SERVICE_ROAM_OFFLOAD, 288 WMI_10_4_SERVICE_BCN_MISS_OFFLOAD, 289 WMI_10_4_SERVICE_STA_PWRSAVE, 290 WMI_10_4_SERVICE_STA_ADVANCED_PWRSAVE, 291 WMI_10_4_SERVICE_AP_UAPSD, 292 WMI_10_4_SERVICE_AP_DFS, 293 WMI_10_4_SERVICE_11AC, 294 WMI_10_4_SERVICE_BLOCKACK, 295 WMI_10_4_SERVICE_PHYERR, 296 WMI_10_4_SERVICE_BCN_FILTER, 297 WMI_10_4_SERVICE_RTT, 298 WMI_10_4_SERVICE_RATECTRL, 299 WMI_10_4_SERVICE_WOW, 300 WMI_10_4_SERVICE_RATECTRL_CACHE, 301 WMI_10_4_SERVICE_IRAM_TIDS, 302 WMI_10_4_SERVICE_BURST, 303 WMI_10_4_SERVICE_SMART_ANTENNA_SW_SUPPORT, 304 WMI_10_4_SERVICE_GTK_OFFLOAD, 305 WMI_10_4_SERVICE_SCAN_SCH, 306 WMI_10_4_SERVICE_CSA_OFFLOAD, 307 WMI_10_4_SERVICE_CHATTER, 308 WMI_10_4_SERVICE_COEX_FREQAVOID, 309 WMI_10_4_SERVICE_PACKET_POWER_SAVE, 310 WMI_10_4_SERVICE_FORCE_FW_HANG, 311 WMI_10_4_SERVICE_SMART_ANTENNA_HW_SUPPORT, 312 WMI_10_4_SERVICE_GPIO, 313 WMI_10_4_SERVICE_STA_UAPSD_BASIC_AUTO_TRIG, 314 WMI_10_4_SERVICE_STA_UAPSD_VAR_AUTO_TRIG, 315 WMI_10_4_SERVICE_STA_KEEP_ALIVE, 316 WMI_10_4_SERVICE_TX_ENCAP, 317 WMI_10_4_SERVICE_AP_PS_DETECT_OUT_OF_SYNC, 318 WMI_10_4_SERVICE_EARLY_RX, 319 WMI_10_4_SERVICE_ENHANCED_PROXY_STA, 320 WMI_10_4_SERVICE_TT, 321 WMI_10_4_SERVICE_ATF, 322 WMI_10_4_SERVICE_PEER_CACHING, 323 WMI_10_4_SERVICE_COEX_GPIO, 324 WMI_10_4_SERVICE_AUX_SPECTRAL_INTF, 325 WMI_10_4_SERVICE_AUX_CHAN_LOAD_INTF, 326 WMI_10_4_SERVICE_BSS_CHANNEL_INFO_64, 327 WMI_10_4_SERVICE_EXT_RES_CFG_SUPPORT, 328 WMI_10_4_SERVICE_MESH_NON_11S, 329 WMI_10_4_SERVICE_RESTRT_CHNL_SUPPORT, 330 WMI_10_4_SERVICE_PEER_STATS, 331 WMI_10_4_SERVICE_MESH_11S, 332 WMI_10_4_SERVICE_PERIODIC_CHAN_STAT_SUPPORT, 333 WMI_10_4_SERVICE_TX_MODE_PUSH_ONLY, 334 WMI_10_4_SERVICE_TX_MODE_PUSH_PULL, 335 WMI_10_4_SERVICE_TX_MODE_DYNAMIC, 336 WMI_10_4_SERVICE_VDEV_RX_FILTER, 337 WMI_10_4_SERVICE_BTCOEX, 338 WMI_10_4_SERVICE_CHECK_CAL_VERSION, 339 WMI_10_4_SERVICE_DBGLOG_WARN2, 340 WMI_10_4_SERVICE_BTCOEX_DUTY_CYCLE, 341 WMI_10_4_SERVICE_4_WIRE_COEX_SUPPORT, 342 WMI_10_4_SERVICE_EXTENDED_NSS_SUPPORT, 343 WMI_10_4_SERVICE_PROG_GPIO_BAND_SELECT, 344 WMI_10_4_SERVICE_SMART_LOGGING_SUPPORT, 345 WMI_10_4_SERVICE_TDLS, 346 WMI_10_4_SERVICE_TDLS_OFFCHAN, 347 WMI_10_4_SERVICE_TDLS_UAPSD_BUFFER_STA, 348 WMI_10_4_SERVICE_TDLS_UAPSD_SLEEP_STA, 349 WMI_10_4_SERVICE_TDLS_CONN_TRACKER_IN_HOST_MODE, 350 WMI_10_4_SERVICE_TDLS_EXPLICIT_MODE_ONLY, 351 WMI_10_4_SERVICE_TDLS_WIDER_BANDWIDTH, 352 WMI_10_4_SERVICE_HTT_MGMT_TX_COMP_VALID_FLAGS, 353 WMI_10_4_SERVICE_HOST_DFS_CHECK_SUPPORT, 354 WMI_10_4_SERVICE_TPC_STATS_FINAL, 355 WMI_10_4_SERVICE_CFR_CAPTURE_SUPPORT, 356 WMI_10_4_SERVICE_TX_DATA_ACK_RSSI, 357 WMI_10_4_SERVICE_CFR_CAPTURE_IND_MSG_TYPE_LEGACY, 358 WMI_10_4_SERVICE_PER_PACKET_SW_ENCRYPT, 359 WMI_10_4_SERVICE_PEER_TID_CONFIGS_SUPPORT, 360 WMI_10_4_SERVICE_VDEV_BCN_RATE_CONTROL, 361 WMI_10_4_SERVICE_VDEV_DIFFERENT_BEACON_INTERVAL_SUPPORT, 362 WMI_10_4_SERVICE_HTT_ASSERT_TRIGGER_SUPPORT, 363 WMI_10_4_SERVICE_VDEV_FILTER_NEIGHBOR_RX_PACKETS, 364 WMI_10_4_SERVICE_VDEV_DISABLE_4_ADDR_SRC_LRN_SUPPORT, 365 WMI_10_4_SERVICE_PEER_CHWIDTH_CHANGE, 366 WMI_10_4_SERVICE_RX_FILTER_OUT_COUNT, 367 WMI_10_4_SERVICE_RTT_RESPONDER_ROLE, 368 WMI_10_4_SERVICE_EXT_PEER_TID_CONFIGS_SUPPORT, 369 WMI_10_4_SERVICE_REPORT_AIRTIME, 370 }; 371 372 static inline char *wmi_service_name(enum wmi_service service_id) 373 { 374 #define SVCSTR(x) case x: return #x 375 376 switch (service_id) { 377 SVCSTR(WMI_SERVICE_BEACON_OFFLOAD); 378 SVCSTR(WMI_SERVICE_SCAN_OFFLOAD); 379 SVCSTR(WMI_SERVICE_ROAM_OFFLOAD); 380 SVCSTR(WMI_SERVICE_BCN_MISS_OFFLOAD); 381 SVCSTR(WMI_SERVICE_STA_PWRSAVE); 382 SVCSTR(WMI_SERVICE_STA_ADVANCED_PWRSAVE); 383 SVCSTR(WMI_SERVICE_AP_UAPSD); 384 SVCSTR(WMI_SERVICE_AP_DFS); 385 SVCSTR(WMI_SERVICE_11AC); 386 SVCSTR(WMI_SERVICE_BLOCKACK); 387 SVCSTR(WMI_SERVICE_PHYERR); 388 SVCSTR(WMI_SERVICE_BCN_FILTER); 389 SVCSTR(WMI_SERVICE_RTT); 390 SVCSTR(WMI_SERVICE_RATECTRL); 391 SVCSTR(WMI_SERVICE_WOW); 392 SVCSTR(WMI_SERVICE_RATECTRL_CACHE); 393 SVCSTR(WMI_SERVICE_IRAM_TIDS); 394 SVCSTR(WMI_SERVICE_ARPNS_OFFLOAD); 395 SVCSTR(WMI_SERVICE_NLO); 396 SVCSTR(WMI_SERVICE_GTK_OFFLOAD); 397 SVCSTR(WMI_SERVICE_SCAN_SCH); 398 SVCSTR(WMI_SERVICE_CSA_OFFLOAD); 399 SVCSTR(WMI_SERVICE_CHATTER); 400 SVCSTR(WMI_SERVICE_COEX_FREQAVOID); 401 SVCSTR(WMI_SERVICE_PACKET_POWER_SAVE); 402 SVCSTR(WMI_SERVICE_FORCE_FW_HANG); 403 SVCSTR(WMI_SERVICE_GPIO); 404 SVCSTR(WMI_SERVICE_STA_DTIM_PS_MODULATED_DTIM); 405 SVCSTR(WMI_SERVICE_STA_UAPSD_BASIC_AUTO_TRIG); 406 SVCSTR(WMI_SERVICE_STA_UAPSD_VAR_AUTO_TRIG); 407 SVCSTR(WMI_SERVICE_STA_KEEP_ALIVE); 408 SVCSTR(WMI_SERVICE_TX_ENCAP); 409 SVCSTR(WMI_SERVICE_BURST); 410 SVCSTR(WMI_SERVICE_SMART_ANTENNA_SW_SUPPORT); 411 SVCSTR(WMI_SERVICE_SMART_ANTENNA_HW_SUPPORT); 412 SVCSTR(WMI_SERVICE_ROAM_SCAN_OFFLOAD); 413 SVCSTR(WMI_SERVICE_AP_PS_DETECT_OUT_OF_SYNC); 414 SVCSTR(WMI_SERVICE_EARLY_RX); 415 SVCSTR(WMI_SERVICE_STA_SMPS); 416 SVCSTR(WMI_SERVICE_FWTEST); 417 SVCSTR(WMI_SERVICE_STA_WMMAC); 418 SVCSTR(WMI_SERVICE_TDLS); 419 SVCSTR(WMI_SERVICE_MCC_BCN_INTERVAL_CHANGE); 420 SVCSTR(WMI_SERVICE_ADAPTIVE_OCS); 421 SVCSTR(WMI_SERVICE_BA_SSN_SUPPORT); 422 SVCSTR(WMI_SERVICE_FILTER_IPSEC_NATKEEPALIVE); 423 SVCSTR(WMI_SERVICE_WLAN_HB); 424 SVCSTR(WMI_SERVICE_LTE_ANT_SHARE_SUPPORT); 425 SVCSTR(WMI_SERVICE_BATCH_SCAN); 426 SVCSTR(WMI_SERVICE_QPOWER); 427 SVCSTR(WMI_SERVICE_PLMREQ); 428 SVCSTR(WMI_SERVICE_THERMAL_MGMT); 429 SVCSTR(WMI_SERVICE_RMC); 430 SVCSTR(WMI_SERVICE_MHF_OFFLOAD); 431 SVCSTR(WMI_SERVICE_COEX_SAR); 432 SVCSTR(WMI_SERVICE_BCN_TXRATE_OVERRIDE); 433 SVCSTR(WMI_SERVICE_NAN); 434 SVCSTR(WMI_SERVICE_L1SS_STAT); 435 SVCSTR(WMI_SERVICE_ESTIMATE_LINKSPEED); 436 SVCSTR(WMI_SERVICE_OBSS_SCAN); 437 SVCSTR(WMI_SERVICE_TDLS_OFFCHAN); 438 SVCSTR(WMI_SERVICE_TDLS_UAPSD_BUFFER_STA); 439 SVCSTR(WMI_SERVICE_TDLS_UAPSD_SLEEP_STA); 440 SVCSTR(WMI_SERVICE_IBSS_PWRSAVE); 441 SVCSTR(WMI_SERVICE_LPASS); 442 SVCSTR(WMI_SERVICE_EXTSCAN); 443 SVCSTR(WMI_SERVICE_D0WOW); 444 SVCSTR(WMI_SERVICE_HSOFFLOAD); 445 SVCSTR(WMI_SERVICE_ROAM_HO_OFFLOAD); 446 SVCSTR(WMI_SERVICE_RX_FULL_REORDER); 447 SVCSTR(WMI_SERVICE_DHCP_OFFLOAD); 448 SVCSTR(WMI_SERVICE_STA_RX_IPA_OFFLOAD_SUPPORT); 449 SVCSTR(WMI_SERVICE_MDNS_OFFLOAD); 450 SVCSTR(WMI_SERVICE_SAP_AUTH_OFFLOAD); 451 SVCSTR(WMI_SERVICE_ATF); 452 SVCSTR(WMI_SERVICE_COEX_GPIO); 453 SVCSTR(WMI_SERVICE_ENHANCED_PROXY_STA); 454 SVCSTR(WMI_SERVICE_TT); 455 SVCSTR(WMI_SERVICE_PEER_CACHING); 456 SVCSTR(WMI_SERVICE_AUX_SPECTRAL_INTF); 457 SVCSTR(WMI_SERVICE_AUX_CHAN_LOAD_INTF); 458 SVCSTR(WMI_SERVICE_BSS_CHANNEL_INFO_64); 459 SVCSTR(WMI_SERVICE_EXT_RES_CFG_SUPPORT); 460 SVCSTR(WMI_SERVICE_MESH_11S); 461 SVCSTR(WMI_SERVICE_MESH_NON_11S); 462 SVCSTR(WMI_SERVICE_PEER_STATS); 463 SVCSTR(WMI_SERVICE_RESTRT_CHNL_SUPPORT); 464 SVCSTR(WMI_SERVICE_PERIODIC_CHAN_STAT_SUPPORT); 465 SVCSTR(WMI_SERVICE_TX_MODE_PUSH_ONLY); 466 SVCSTR(WMI_SERVICE_TX_MODE_PUSH_PULL); 467 SVCSTR(WMI_SERVICE_TX_MODE_DYNAMIC); 468 SVCSTR(WMI_SERVICE_VDEV_RX_FILTER); 469 SVCSTR(WMI_SERVICE_BTCOEX); 470 SVCSTR(WMI_SERVICE_CHECK_CAL_VERSION); 471 SVCSTR(WMI_SERVICE_DBGLOG_WARN2); 472 SVCSTR(WMI_SERVICE_BTCOEX_DUTY_CYCLE); 473 SVCSTR(WMI_SERVICE_4_WIRE_COEX_SUPPORT); 474 SVCSTR(WMI_SERVICE_EXTENDED_NSS_SUPPORT); 475 SVCSTR(WMI_SERVICE_PROG_GPIO_BAND_SELECT); 476 SVCSTR(WMI_SERVICE_SMART_LOGGING_SUPPORT); 477 SVCSTR(WMI_SERVICE_TDLS_CONN_TRACKER_IN_HOST_MODE); 478 SVCSTR(WMI_SERVICE_TDLS_EXPLICIT_MODE_ONLY); 479 SVCSTR(WMI_SERVICE_MGMT_TX_WMI); 480 SVCSTR(WMI_SERVICE_TDLS_WIDER_BANDWIDTH); 481 SVCSTR(WMI_SERVICE_HTT_MGMT_TX_COMP_VALID_FLAGS); 482 SVCSTR(WMI_SERVICE_HOST_DFS_CHECK_SUPPORT); 483 SVCSTR(WMI_SERVICE_TPC_STATS_FINAL); 484 SVCSTR(WMI_SERVICE_RESET_CHIP); 485 SVCSTR(WMI_SERVICE_SPOOF_MAC_SUPPORT); 486 SVCSTR(WMI_SERVICE_TX_DATA_ACK_RSSI); 487 SVCSTR(WMI_SERVICE_VDEV_DIFFERENT_BEACON_INTERVAL_SUPPORT); 488 SVCSTR(WMI_SERVICE_VDEV_DISABLE_4_ADDR_SRC_LRN_SUPPORT); 489 SVCSTR(WMI_SERVICE_BB_TIMING_CONFIG_SUPPORT); 490 SVCSTR(WMI_SERVICE_THERM_THROT); 491 SVCSTR(WMI_SERVICE_RTT_RESPONDER_ROLE); 492 SVCSTR(WMI_SERVICE_PER_PACKET_SW_ENCRYPT); 493 SVCSTR(WMI_SERVICE_REPORT_AIRTIME); 494 495 case WMI_SERVICE_MAX: 496 return NULL; 497 } 498 499 #undef SVCSTR 500 501 return NULL; 502 } 503 504 #define WMI_SERVICE_IS_ENABLED(wmi_svc_bmap, svc_id, len) \ 505 ((svc_id) < (len) && \ 506 __le32_to_cpu((wmi_svc_bmap)[(svc_id) / (sizeof(u32))]) & \ 507 BIT((svc_id) % (sizeof(u32)))) 508 509 /* This extension is required to accommodate new services, current limit 510 * for wmi_services is 64 as target is using only 4-bits of each 32-bit 511 * wmi_service word. Extending this to make use of remaining unused bits 512 * for new services. 513 */ 514 #define WMI_EXT_SERVICE_IS_ENABLED(wmi_svc_bmap, svc_id, len) \ 515 ((svc_id) >= (len) && \ 516 __le32_to_cpu((wmi_svc_bmap)[((svc_id) - (len)) / 28]) & \ 517 BIT(((((svc_id) - (len)) % 28) & 0x1f) + 4)) 518 519 #define SVCMAP(x, y, len) \ 520 do { \ 521 if ((WMI_SERVICE_IS_ENABLED((in), (x), (len))) || \ 522 (WMI_EXT_SERVICE_IS_ENABLED((in), (x), (len)))) \ 523 __set_bit(y, out); \ 524 } while (0) 525 526 static inline void wmi_10x_svc_map(const __le32 *in, unsigned long *out, 527 size_t len) 528 { 529 SVCMAP(WMI_10X_SERVICE_BEACON_OFFLOAD, 530 WMI_SERVICE_BEACON_OFFLOAD, len); 531 SVCMAP(WMI_10X_SERVICE_SCAN_OFFLOAD, 532 WMI_SERVICE_SCAN_OFFLOAD, len); 533 SVCMAP(WMI_10X_SERVICE_ROAM_OFFLOAD, 534 WMI_SERVICE_ROAM_OFFLOAD, len); 535 SVCMAP(WMI_10X_SERVICE_BCN_MISS_OFFLOAD, 536 WMI_SERVICE_BCN_MISS_OFFLOAD, len); 537 SVCMAP(WMI_10X_SERVICE_STA_PWRSAVE, 538 WMI_SERVICE_STA_PWRSAVE, len); 539 SVCMAP(WMI_10X_SERVICE_STA_ADVANCED_PWRSAVE, 540 WMI_SERVICE_STA_ADVANCED_PWRSAVE, len); 541 SVCMAP(WMI_10X_SERVICE_AP_UAPSD, 542 WMI_SERVICE_AP_UAPSD, len); 543 SVCMAP(WMI_10X_SERVICE_AP_DFS, 544 WMI_SERVICE_AP_DFS, len); 545 SVCMAP(WMI_10X_SERVICE_11AC, 546 WMI_SERVICE_11AC, len); 547 SVCMAP(WMI_10X_SERVICE_BLOCKACK, 548 WMI_SERVICE_BLOCKACK, len); 549 SVCMAP(WMI_10X_SERVICE_PHYERR, 550 WMI_SERVICE_PHYERR, len); 551 SVCMAP(WMI_10X_SERVICE_BCN_FILTER, 552 WMI_SERVICE_BCN_FILTER, len); 553 SVCMAP(WMI_10X_SERVICE_RTT, 554 WMI_SERVICE_RTT, len); 555 SVCMAP(WMI_10X_SERVICE_RATECTRL, 556 WMI_SERVICE_RATECTRL, len); 557 SVCMAP(WMI_10X_SERVICE_WOW, 558 WMI_SERVICE_WOW, len); 559 SVCMAP(WMI_10X_SERVICE_RATECTRL_CACHE, 560 WMI_SERVICE_RATECTRL_CACHE, len); 561 SVCMAP(WMI_10X_SERVICE_IRAM_TIDS, 562 WMI_SERVICE_IRAM_TIDS, len); 563 SVCMAP(WMI_10X_SERVICE_BURST, 564 WMI_SERVICE_BURST, len); 565 SVCMAP(WMI_10X_SERVICE_SMART_ANTENNA_SW_SUPPORT, 566 WMI_SERVICE_SMART_ANTENNA_SW_SUPPORT, len); 567 SVCMAP(WMI_10X_SERVICE_FORCE_FW_HANG, 568 WMI_SERVICE_FORCE_FW_HANG, len); 569 SVCMAP(WMI_10X_SERVICE_SMART_ANTENNA_HW_SUPPORT, 570 WMI_SERVICE_SMART_ANTENNA_HW_SUPPORT, len); 571 SVCMAP(WMI_10X_SERVICE_ATF, 572 WMI_SERVICE_ATF, len); 573 SVCMAP(WMI_10X_SERVICE_COEX_GPIO, 574 WMI_SERVICE_COEX_GPIO, len); 575 SVCMAP(WMI_10X_SERVICE_AUX_SPECTRAL_INTF, 576 WMI_SERVICE_AUX_SPECTRAL_INTF, len); 577 SVCMAP(WMI_10X_SERVICE_AUX_CHAN_LOAD_INTF, 578 WMI_SERVICE_AUX_CHAN_LOAD_INTF, len); 579 SVCMAP(WMI_10X_SERVICE_BSS_CHANNEL_INFO_64, 580 WMI_SERVICE_BSS_CHANNEL_INFO_64, len); 581 SVCMAP(WMI_10X_SERVICE_MESH, 582 WMI_SERVICE_MESH_11S, len); 583 SVCMAP(WMI_10X_SERVICE_EXT_RES_CFG_SUPPORT, 584 WMI_SERVICE_EXT_RES_CFG_SUPPORT, len); 585 SVCMAP(WMI_10X_SERVICE_PEER_STATS, 586 WMI_SERVICE_PEER_STATS, len); 587 SVCMAP(WMI_10X_SERVICE_RESET_CHIP, 588 WMI_SERVICE_RESET_CHIP, len); 589 SVCMAP(WMI_10X_SERVICE_HTT_MGMT_TX_COMP_VALID_FLAGS, 590 WMI_SERVICE_HTT_MGMT_TX_COMP_VALID_FLAGS, len); 591 SVCMAP(WMI_10X_SERVICE_BB_TIMING_CONFIG_SUPPORT, 592 WMI_SERVICE_BB_TIMING_CONFIG_SUPPORT, len); 593 SVCMAP(WMI_10X_SERVICE_PER_PACKET_SW_ENCRYPT, 594 WMI_SERVICE_PER_PACKET_SW_ENCRYPT, len); 595 } 596 597 static inline void wmi_main_svc_map(const __le32 *in, unsigned long *out, 598 size_t len) 599 { 600 SVCMAP(WMI_MAIN_SERVICE_BEACON_OFFLOAD, 601 WMI_SERVICE_BEACON_OFFLOAD, len); 602 SVCMAP(WMI_MAIN_SERVICE_SCAN_OFFLOAD, 603 WMI_SERVICE_SCAN_OFFLOAD, len); 604 SVCMAP(WMI_MAIN_SERVICE_ROAM_OFFLOAD, 605 WMI_SERVICE_ROAM_OFFLOAD, len); 606 SVCMAP(WMI_MAIN_SERVICE_BCN_MISS_OFFLOAD, 607 WMI_SERVICE_BCN_MISS_OFFLOAD, len); 608 SVCMAP(WMI_MAIN_SERVICE_STA_PWRSAVE, 609 WMI_SERVICE_STA_PWRSAVE, len); 610 SVCMAP(WMI_MAIN_SERVICE_STA_ADVANCED_PWRSAVE, 611 WMI_SERVICE_STA_ADVANCED_PWRSAVE, len); 612 SVCMAP(WMI_MAIN_SERVICE_AP_UAPSD, 613 WMI_SERVICE_AP_UAPSD, len); 614 SVCMAP(WMI_MAIN_SERVICE_AP_DFS, 615 WMI_SERVICE_AP_DFS, len); 616 SVCMAP(WMI_MAIN_SERVICE_11AC, 617 WMI_SERVICE_11AC, len); 618 SVCMAP(WMI_MAIN_SERVICE_BLOCKACK, 619 WMI_SERVICE_BLOCKACK, len); 620 SVCMAP(WMI_MAIN_SERVICE_PHYERR, 621 WMI_SERVICE_PHYERR, len); 622 SVCMAP(WMI_MAIN_SERVICE_BCN_FILTER, 623 WMI_SERVICE_BCN_FILTER, len); 624 SVCMAP(WMI_MAIN_SERVICE_RTT, 625 WMI_SERVICE_RTT, len); 626 SVCMAP(WMI_MAIN_SERVICE_RATECTRL, 627 WMI_SERVICE_RATECTRL, len); 628 SVCMAP(WMI_MAIN_SERVICE_WOW, 629 WMI_SERVICE_WOW, len); 630 SVCMAP(WMI_MAIN_SERVICE_RATECTRL_CACHE, 631 WMI_SERVICE_RATECTRL_CACHE, len); 632 SVCMAP(WMI_MAIN_SERVICE_IRAM_TIDS, 633 WMI_SERVICE_IRAM_TIDS, len); 634 SVCMAP(WMI_MAIN_SERVICE_ARPNS_OFFLOAD, 635 WMI_SERVICE_ARPNS_OFFLOAD, len); 636 SVCMAP(WMI_MAIN_SERVICE_NLO, 637 WMI_SERVICE_NLO, len); 638 SVCMAP(WMI_MAIN_SERVICE_GTK_OFFLOAD, 639 WMI_SERVICE_GTK_OFFLOAD, len); 640 SVCMAP(WMI_MAIN_SERVICE_SCAN_SCH, 641 WMI_SERVICE_SCAN_SCH, len); 642 SVCMAP(WMI_MAIN_SERVICE_CSA_OFFLOAD, 643 WMI_SERVICE_CSA_OFFLOAD, len); 644 SVCMAP(WMI_MAIN_SERVICE_CHATTER, 645 WMI_SERVICE_CHATTER, len); 646 SVCMAP(WMI_MAIN_SERVICE_COEX_FREQAVOID, 647 WMI_SERVICE_COEX_FREQAVOID, len); 648 SVCMAP(WMI_MAIN_SERVICE_PACKET_POWER_SAVE, 649 WMI_SERVICE_PACKET_POWER_SAVE, len); 650 SVCMAP(WMI_MAIN_SERVICE_FORCE_FW_HANG, 651 WMI_SERVICE_FORCE_FW_HANG, len); 652 SVCMAP(WMI_MAIN_SERVICE_GPIO, 653 WMI_SERVICE_GPIO, len); 654 SVCMAP(WMI_MAIN_SERVICE_STA_DTIM_PS_MODULATED_DTIM, 655 WMI_SERVICE_STA_DTIM_PS_MODULATED_DTIM, len); 656 SVCMAP(WMI_MAIN_SERVICE_STA_UAPSD_BASIC_AUTO_TRIG, 657 WMI_SERVICE_STA_UAPSD_BASIC_AUTO_TRIG, len); 658 SVCMAP(WMI_MAIN_SERVICE_STA_UAPSD_VAR_AUTO_TRIG, 659 WMI_SERVICE_STA_UAPSD_VAR_AUTO_TRIG, len); 660 SVCMAP(WMI_MAIN_SERVICE_STA_KEEP_ALIVE, 661 WMI_SERVICE_STA_KEEP_ALIVE, len); 662 SVCMAP(WMI_MAIN_SERVICE_TX_ENCAP, 663 WMI_SERVICE_TX_ENCAP, len); 664 } 665 666 static inline void wmi_10_4_svc_map(const __le32 *in, unsigned long *out, 667 size_t len) 668 { 669 SVCMAP(WMI_10_4_SERVICE_BEACON_OFFLOAD, 670 WMI_SERVICE_BEACON_OFFLOAD, len); 671 SVCMAP(WMI_10_4_SERVICE_SCAN_OFFLOAD, 672 WMI_SERVICE_SCAN_OFFLOAD, len); 673 SVCMAP(WMI_10_4_SERVICE_ROAM_OFFLOAD, 674 WMI_SERVICE_ROAM_OFFLOAD, len); 675 SVCMAP(WMI_10_4_SERVICE_BCN_MISS_OFFLOAD, 676 WMI_SERVICE_BCN_MISS_OFFLOAD, len); 677 SVCMAP(WMI_10_4_SERVICE_STA_PWRSAVE, 678 WMI_SERVICE_STA_PWRSAVE, len); 679 SVCMAP(WMI_10_4_SERVICE_STA_ADVANCED_PWRSAVE, 680 WMI_SERVICE_STA_ADVANCED_PWRSAVE, len); 681 SVCMAP(WMI_10_4_SERVICE_AP_UAPSD, 682 WMI_SERVICE_AP_UAPSD, len); 683 SVCMAP(WMI_10_4_SERVICE_AP_DFS, 684 WMI_SERVICE_AP_DFS, len); 685 SVCMAP(WMI_10_4_SERVICE_11AC, 686 WMI_SERVICE_11AC, len); 687 SVCMAP(WMI_10_4_SERVICE_BLOCKACK, 688 WMI_SERVICE_BLOCKACK, len); 689 SVCMAP(WMI_10_4_SERVICE_PHYERR, 690 WMI_SERVICE_PHYERR, len); 691 SVCMAP(WMI_10_4_SERVICE_BCN_FILTER, 692 WMI_SERVICE_BCN_FILTER, len); 693 SVCMAP(WMI_10_4_SERVICE_RTT, 694 WMI_SERVICE_RTT, len); 695 SVCMAP(WMI_10_4_SERVICE_RATECTRL, 696 WMI_SERVICE_RATECTRL, len); 697 SVCMAP(WMI_10_4_SERVICE_WOW, 698 WMI_SERVICE_WOW, len); 699 SVCMAP(WMI_10_4_SERVICE_RATECTRL_CACHE, 700 WMI_SERVICE_RATECTRL_CACHE, len); 701 SVCMAP(WMI_10_4_SERVICE_IRAM_TIDS, 702 WMI_SERVICE_IRAM_TIDS, len); 703 SVCMAP(WMI_10_4_SERVICE_BURST, 704 WMI_SERVICE_BURST, len); 705 SVCMAP(WMI_10_4_SERVICE_SMART_ANTENNA_SW_SUPPORT, 706 WMI_SERVICE_SMART_ANTENNA_SW_SUPPORT, len); 707 SVCMAP(WMI_10_4_SERVICE_GTK_OFFLOAD, 708 WMI_SERVICE_GTK_OFFLOAD, len); 709 SVCMAP(WMI_10_4_SERVICE_SCAN_SCH, 710 WMI_SERVICE_SCAN_SCH, len); 711 SVCMAP(WMI_10_4_SERVICE_CSA_OFFLOAD, 712 WMI_SERVICE_CSA_OFFLOAD, len); 713 SVCMAP(WMI_10_4_SERVICE_CHATTER, 714 WMI_SERVICE_CHATTER, len); 715 SVCMAP(WMI_10_4_SERVICE_COEX_FREQAVOID, 716 WMI_SERVICE_COEX_FREQAVOID, len); 717 SVCMAP(WMI_10_4_SERVICE_PACKET_POWER_SAVE, 718 WMI_SERVICE_PACKET_POWER_SAVE, len); 719 SVCMAP(WMI_10_4_SERVICE_FORCE_FW_HANG, 720 WMI_SERVICE_FORCE_FW_HANG, len); 721 SVCMAP(WMI_10_4_SERVICE_SMART_ANTENNA_HW_SUPPORT, 722 WMI_SERVICE_SMART_ANTENNA_HW_SUPPORT, len); 723 SVCMAP(WMI_10_4_SERVICE_GPIO, 724 WMI_SERVICE_GPIO, len); 725 SVCMAP(WMI_10_4_SERVICE_STA_UAPSD_BASIC_AUTO_TRIG, 726 WMI_SERVICE_STA_UAPSD_BASIC_AUTO_TRIG, len); 727 SVCMAP(WMI_10_4_SERVICE_STA_UAPSD_VAR_AUTO_TRIG, 728 WMI_SERVICE_STA_UAPSD_VAR_AUTO_TRIG, len); 729 SVCMAP(WMI_10_4_SERVICE_STA_KEEP_ALIVE, 730 WMI_SERVICE_STA_KEEP_ALIVE, len); 731 SVCMAP(WMI_10_4_SERVICE_TX_ENCAP, 732 WMI_SERVICE_TX_ENCAP, len); 733 SVCMAP(WMI_10_4_SERVICE_AP_PS_DETECT_OUT_OF_SYNC, 734 WMI_SERVICE_AP_PS_DETECT_OUT_OF_SYNC, len); 735 SVCMAP(WMI_10_4_SERVICE_EARLY_RX, 736 WMI_SERVICE_EARLY_RX, len); 737 SVCMAP(WMI_10_4_SERVICE_ENHANCED_PROXY_STA, 738 WMI_SERVICE_ENHANCED_PROXY_STA, len); 739 SVCMAP(WMI_10_4_SERVICE_TT, 740 WMI_SERVICE_TT, len); 741 SVCMAP(WMI_10_4_SERVICE_ATF, 742 WMI_SERVICE_ATF, len); 743 SVCMAP(WMI_10_4_SERVICE_PEER_CACHING, 744 WMI_SERVICE_PEER_CACHING, len); 745 SVCMAP(WMI_10_4_SERVICE_COEX_GPIO, 746 WMI_SERVICE_COEX_GPIO, len); 747 SVCMAP(WMI_10_4_SERVICE_AUX_SPECTRAL_INTF, 748 WMI_SERVICE_AUX_SPECTRAL_INTF, len); 749 SVCMAP(WMI_10_4_SERVICE_AUX_CHAN_LOAD_INTF, 750 WMI_SERVICE_AUX_CHAN_LOAD_INTF, len); 751 SVCMAP(WMI_10_4_SERVICE_BSS_CHANNEL_INFO_64, 752 WMI_SERVICE_BSS_CHANNEL_INFO_64, len); 753 SVCMAP(WMI_10_4_SERVICE_EXT_RES_CFG_SUPPORT, 754 WMI_SERVICE_EXT_RES_CFG_SUPPORT, len); 755 SVCMAP(WMI_10_4_SERVICE_MESH_NON_11S, 756 WMI_SERVICE_MESH_NON_11S, len); 757 SVCMAP(WMI_10_4_SERVICE_RESTRT_CHNL_SUPPORT, 758 WMI_SERVICE_RESTRT_CHNL_SUPPORT, len); 759 SVCMAP(WMI_10_4_SERVICE_PEER_STATS, 760 WMI_SERVICE_PEER_STATS, len); 761 SVCMAP(WMI_10_4_SERVICE_MESH_11S, 762 WMI_SERVICE_MESH_11S, len); 763 SVCMAP(WMI_10_4_SERVICE_PERIODIC_CHAN_STAT_SUPPORT, 764 WMI_SERVICE_PERIODIC_CHAN_STAT_SUPPORT, len); 765 SVCMAP(WMI_10_4_SERVICE_TX_MODE_PUSH_ONLY, 766 WMI_SERVICE_TX_MODE_PUSH_ONLY, len); 767 SVCMAP(WMI_10_4_SERVICE_TX_MODE_PUSH_PULL, 768 WMI_SERVICE_TX_MODE_PUSH_PULL, len); 769 SVCMAP(WMI_10_4_SERVICE_TX_MODE_DYNAMIC, 770 WMI_SERVICE_TX_MODE_DYNAMIC, len); 771 SVCMAP(WMI_10_4_SERVICE_VDEV_RX_FILTER, 772 WMI_SERVICE_VDEV_RX_FILTER, len); 773 SVCMAP(WMI_10_4_SERVICE_BTCOEX, 774 WMI_SERVICE_BTCOEX, len); 775 SVCMAP(WMI_10_4_SERVICE_CHECK_CAL_VERSION, 776 WMI_SERVICE_CHECK_CAL_VERSION, len); 777 SVCMAP(WMI_10_4_SERVICE_DBGLOG_WARN2, 778 WMI_SERVICE_DBGLOG_WARN2, len); 779 SVCMAP(WMI_10_4_SERVICE_BTCOEX_DUTY_CYCLE, 780 WMI_SERVICE_BTCOEX_DUTY_CYCLE, len); 781 SVCMAP(WMI_10_4_SERVICE_4_WIRE_COEX_SUPPORT, 782 WMI_SERVICE_4_WIRE_COEX_SUPPORT, len); 783 SVCMAP(WMI_10_4_SERVICE_EXTENDED_NSS_SUPPORT, 784 WMI_SERVICE_EXTENDED_NSS_SUPPORT, len); 785 SVCMAP(WMI_10_4_SERVICE_PROG_GPIO_BAND_SELECT, 786 WMI_SERVICE_PROG_GPIO_BAND_SELECT, len); 787 SVCMAP(WMI_10_4_SERVICE_SMART_LOGGING_SUPPORT, 788 WMI_SERVICE_SMART_LOGGING_SUPPORT, len); 789 SVCMAP(WMI_10_4_SERVICE_TDLS, 790 WMI_SERVICE_TDLS, len); 791 SVCMAP(WMI_10_4_SERVICE_TDLS_OFFCHAN, 792 WMI_SERVICE_TDLS_OFFCHAN, len); 793 SVCMAP(WMI_10_4_SERVICE_TDLS_UAPSD_BUFFER_STA, 794 WMI_SERVICE_TDLS_UAPSD_BUFFER_STA, len); 795 SVCMAP(WMI_10_4_SERVICE_TDLS_UAPSD_SLEEP_STA, 796 WMI_SERVICE_TDLS_UAPSD_SLEEP_STA, len); 797 SVCMAP(WMI_10_4_SERVICE_TDLS_CONN_TRACKER_IN_HOST_MODE, 798 WMI_SERVICE_TDLS_CONN_TRACKER_IN_HOST_MODE, len); 799 SVCMAP(WMI_10_4_SERVICE_TDLS_EXPLICIT_MODE_ONLY, 800 WMI_SERVICE_TDLS_EXPLICIT_MODE_ONLY, len); 801 SVCMAP(WMI_10_4_SERVICE_TDLS_WIDER_BANDWIDTH, 802 WMI_SERVICE_TDLS_WIDER_BANDWIDTH, len); 803 SVCMAP(WMI_10_4_SERVICE_HTT_MGMT_TX_COMP_VALID_FLAGS, 804 WMI_SERVICE_HTT_MGMT_TX_COMP_VALID_FLAGS, len); 805 SVCMAP(WMI_10_4_SERVICE_HOST_DFS_CHECK_SUPPORT, 806 WMI_SERVICE_HOST_DFS_CHECK_SUPPORT, len); 807 SVCMAP(WMI_10_4_SERVICE_TPC_STATS_FINAL, 808 WMI_SERVICE_TPC_STATS_FINAL, len); 809 SVCMAP(WMI_10_4_SERVICE_TX_DATA_ACK_RSSI, 810 WMI_SERVICE_TX_DATA_ACK_RSSI, len); 811 SVCMAP(WMI_10_4_SERVICE_VDEV_DIFFERENT_BEACON_INTERVAL_SUPPORT, 812 WMI_SERVICE_VDEV_DIFFERENT_BEACON_INTERVAL_SUPPORT, len); 813 SVCMAP(WMI_10_4_SERVICE_VDEV_DISABLE_4_ADDR_SRC_LRN_SUPPORT, 814 WMI_SERVICE_VDEV_DISABLE_4_ADDR_SRC_LRN_SUPPORT, len); 815 SVCMAP(WMI_10_4_SERVICE_RTT_RESPONDER_ROLE, 816 WMI_SERVICE_RTT_RESPONDER_ROLE, len); 817 SVCMAP(WMI_10_4_SERVICE_PER_PACKET_SW_ENCRYPT, 818 WMI_SERVICE_PER_PACKET_SW_ENCRYPT, len); 819 SVCMAP(WMI_10_4_SERVICE_REPORT_AIRTIME, 820 WMI_SERVICE_REPORT_AIRTIME, len); 821 } 822 823 #undef SVCMAP 824 825 /* 2 word representation of MAC addr */ 826 struct wmi_mac_addr { 827 union { 828 u8 addr[6]; 829 struct { 830 u32 word0; 831 u32 word1; 832 } __packed; 833 } __packed; 834 } __packed; 835 836 struct wmi_cmd_map { 837 u32 init_cmdid; 838 u32 start_scan_cmdid; 839 u32 stop_scan_cmdid; 840 u32 scan_chan_list_cmdid; 841 u32 scan_sch_prio_tbl_cmdid; 842 u32 scan_prob_req_oui_cmdid; 843 u32 pdev_set_regdomain_cmdid; 844 u32 pdev_set_channel_cmdid; 845 u32 pdev_set_param_cmdid; 846 u32 pdev_pktlog_enable_cmdid; 847 u32 pdev_pktlog_disable_cmdid; 848 u32 pdev_set_wmm_params_cmdid; 849 u32 pdev_set_ht_cap_ie_cmdid; 850 u32 pdev_set_vht_cap_ie_cmdid; 851 u32 pdev_set_dscp_tid_map_cmdid; 852 u32 pdev_set_quiet_mode_cmdid; 853 u32 pdev_green_ap_ps_enable_cmdid; 854 u32 pdev_get_tpc_config_cmdid; 855 u32 pdev_set_base_macaddr_cmdid; 856 u32 vdev_create_cmdid; 857 u32 vdev_delete_cmdid; 858 u32 vdev_start_request_cmdid; 859 u32 vdev_restart_request_cmdid; 860 u32 vdev_up_cmdid; 861 u32 vdev_stop_cmdid; 862 u32 vdev_down_cmdid; 863 u32 vdev_set_param_cmdid; 864 u32 vdev_install_key_cmdid; 865 u32 peer_create_cmdid; 866 u32 peer_delete_cmdid; 867 u32 peer_flush_tids_cmdid; 868 u32 peer_set_param_cmdid; 869 u32 peer_assoc_cmdid; 870 u32 peer_add_wds_entry_cmdid; 871 u32 peer_remove_wds_entry_cmdid; 872 u32 peer_mcast_group_cmdid; 873 u32 bcn_tx_cmdid; 874 u32 pdev_send_bcn_cmdid; 875 u32 bcn_tmpl_cmdid; 876 u32 bcn_filter_rx_cmdid; 877 u32 prb_req_filter_rx_cmdid; 878 u32 mgmt_tx_cmdid; 879 u32 mgmt_tx_send_cmdid; 880 u32 prb_tmpl_cmdid; 881 u32 addba_clear_resp_cmdid; 882 u32 addba_send_cmdid; 883 u32 addba_status_cmdid; 884 u32 delba_send_cmdid; 885 u32 addba_set_resp_cmdid; 886 u32 send_singleamsdu_cmdid; 887 u32 sta_powersave_mode_cmdid; 888 u32 sta_powersave_param_cmdid; 889 u32 sta_mimo_ps_mode_cmdid; 890 u32 pdev_dfs_enable_cmdid; 891 u32 pdev_dfs_disable_cmdid; 892 u32 roam_scan_mode; 893 u32 roam_scan_rssi_threshold; 894 u32 roam_scan_period; 895 u32 roam_scan_rssi_change_threshold; 896 u32 roam_ap_profile; 897 u32 ofl_scan_add_ap_profile; 898 u32 ofl_scan_remove_ap_profile; 899 u32 ofl_scan_period; 900 u32 p2p_dev_set_device_info; 901 u32 p2p_dev_set_discoverability; 902 u32 p2p_go_set_beacon_ie; 903 u32 p2p_go_set_probe_resp_ie; 904 u32 p2p_set_vendor_ie_data_cmdid; 905 u32 ap_ps_peer_param_cmdid; 906 u32 ap_ps_peer_uapsd_coex_cmdid; 907 u32 peer_rate_retry_sched_cmdid; 908 u32 wlan_profile_trigger_cmdid; 909 u32 wlan_profile_set_hist_intvl_cmdid; 910 u32 wlan_profile_get_profile_data_cmdid; 911 u32 wlan_profile_enable_profile_id_cmdid; 912 u32 wlan_profile_list_profile_id_cmdid; 913 u32 pdev_suspend_cmdid; 914 u32 pdev_resume_cmdid; 915 u32 add_bcn_filter_cmdid; 916 u32 rmv_bcn_filter_cmdid; 917 u32 wow_add_wake_pattern_cmdid; 918 u32 wow_del_wake_pattern_cmdid; 919 u32 wow_enable_disable_wake_event_cmdid; 920 u32 wow_enable_cmdid; 921 u32 wow_hostwakeup_from_sleep_cmdid; 922 u32 rtt_measreq_cmdid; 923 u32 rtt_tsf_cmdid; 924 u32 vdev_spectral_scan_configure_cmdid; 925 u32 vdev_spectral_scan_enable_cmdid; 926 u32 request_stats_cmdid; 927 u32 set_arp_ns_offload_cmdid; 928 u32 network_list_offload_config_cmdid; 929 u32 gtk_offload_cmdid; 930 u32 csa_offload_enable_cmdid; 931 u32 csa_offload_chanswitch_cmdid; 932 u32 chatter_set_mode_cmdid; 933 u32 peer_tid_addba_cmdid; 934 u32 peer_tid_delba_cmdid; 935 u32 sta_dtim_ps_method_cmdid; 936 u32 sta_uapsd_auto_trig_cmdid; 937 u32 sta_keepalive_cmd; 938 u32 echo_cmdid; 939 u32 pdev_utf_cmdid; 940 u32 dbglog_cfg_cmdid; 941 u32 pdev_qvit_cmdid; 942 u32 pdev_ftm_intg_cmdid; 943 u32 vdev_set_keepalive_cmdid; 944 u32 vdev_get_keepalive_cmdid; 945 u32 force_fw_hang_cmdid; 946 u32 gpio_config_cmdid; 947 u32 gpio_output_cmdid; 948 u32 pdev_get_temperature_cmdid; 949 u32 vdev_set_wmm_params_cmdid; 950 u32 tdls_set_state_cmdid; 951 u32 tdls_peer_update_cmdid; 952 u32 adaptive_qcs_cmdid; 953 u32 scan_update_request_cmdid; 954 u32 vdev_standby_response_cmdid; 955 u32 vdev_resume_response_cmdid; 956 u32 wlan_peer_caching_add_peer_cmdid; 957 u32 wlan_peer_caching_evict_peer_cmdid; 958 u32 wlan_peer_caching_restore_peer_cmdid; 959 u32 wlan_peer_caching_print_all_peers_info_cmdid; 960 u32 peer_update_wds_entry_cmdid; 961 u32 peer_add_proxy_sta_entry_cmdid; 962 u32 rtt_keepalive_cmdid; 963 u32 oem_req_cmdid; 964 u32 nan_cmdid; 965 u32 vdev_ratemask_cmdid; 966 u32 qboost_cfg_cmdid; 967 u32 pdev_smart_ant_enable_cmdid; 968 u32 pdev_smart_ant_set_rx_antenna_cmdid; 969 u32 peer_smart_ant_set_tx_antenna_cmdid; 970 u32 peer_smart_ant_set_train_info_cmdid; 971 u32 peer_smart_ant_set_node_config_ops_cmdid; 972 u32 pdev_set_antenna_switch_table_cmdid; 973 u32 pdev_set_ctl_table_cmdid; 974 u32 pdev_set_mimogain_table_cmdid; 975 u32 pdev_ratepwr_table_cmdid; 976 u32 pdev_ratepwr_chainmsk_table_cmdid; 977 u32 pdev_fips_cmdid; 978 u32 tt_set_conf_cmdid; 979 u32 fwtest_cmdid; 980 u32 vdev_atf_request_cmdid; 981 u32 peer_atf_request_cmdid; 982 u32 pdev_get_ani_cck_config_cmdid; 983 u32 pdev_get_ani_ofdm_config_cmdid; 984 u32 pdev_reserve_ast_entry_cmdid; 985 u32 pdev_get_nfcal_power_cmdid; 986 u32 pdev_get_tpc_cmdid; 987 u32 pdev_get_ast_info_cmdid; 988 u32 vdev_set_dscp_tid_map_cmdid; 989 u32 pdev_get_info_cmdid; 990 u32 vdev_get_info_cmdid; 991 u32 vdev_filter_neighbor_rx_packets_cmdid; 992 u32 mu_cal_start_cmdid; 993 u32 set_cca_params_cmdid; 994 u32 pdev_bss_chan_info_request_cmdid; 995 u32 pdev_enable_adaptive_cca_cmdid; 996 u32 ext_resource_cfg_cmdid; 997 u32 vdev_set_ie_cmdid; 998 u32 set_lteu_config_cmdid; 999 u32 atf_ssid_grouping_request_cmdid; 1000 u32 peer_atf_ext_request_cmdid; 1001 u32 set_periodic_channel_stats_cfg_cmdid; 1002 u32 peer_bwf_request_cmdid; 1003 u32 btcoex_cfg_cmdid; 1004 u32 peer_tx_mu_txmit_count_cmdid; 1005 u32 peer_tx_mu_txmit_rstcnt_cmdid; 1006 u32 peer_gid_userpos_list_cmdid; 1007 u32 pdev_check_cal_version_cmdid; 1008 u32 coex_version_cfg_cmid; 1009 u32 pdev_get_rx_filter_cmdid; 1010 u32 pdev_extended_nss_cfg_cmdid; 1011 u32 vdev_set_scan_nac_rssi_cmdid; 1012 u32 prog_gpio_band_select_cmdid; 1013 u32 config_smart_logging_cmdid; 1014 u32 debug_fatal_condition_cmdid; 1015 u32 get_tsf_timer_cmdid; 1016 u32 pdev_get_tpc_table_cmdid; 1017 u32 vdev_sifs_trigger_time_cmdid; 1018 u32 pdev_wds_entry_list_cmdid; 1019 u32 tdls_set_offchan_mode_cmdid; 1020 u32 radar_found_cmdid; 1021 u32 set_bb_timing_cmdid; 1022 }; 1023 1024 /* 1025 * wmi command groups. 1026 */ 1027 enum wmi_cmd_group { 1028 /* 0 to 2 are reserved */ 1029 WMI_GRP_START = 0x3, 1030 WMI_GRP_SCAN = WMI_GRP_START, 1031 WMI_GRP_PDEV, 1032 WMI_GRP_VDEV, 1033 WMI_GRP_PEER, 1034 WMI_GRP_MGMT, 1035 WMI_GRP_BA_NEG, 1036 WMI_GRP_STA_PS, 1037 WMI_GRP_DFS, 1038 WMI_GRP_ROAM, 1039 WMI_GRP_OFL_SCAN, 1040 WMI_GRP_P2P, 1041 WMI_GRP_AP_PS, 1042 WMI_GRP_RATE_CTRL, 1043 WMI_GRP_PROFILE, 1044 WMI_GRP_SUSPEND, 1045 WMI_GRP_BCN_FILTER, 1046 WMI_GRP_WOW, 1047 WMI_GRP_RTT, 1048 WMI_GRP_SPECTRAL, 1049 WMI_GRP_STATS, 1050 WMI_GRP_ARP_NS_OFL, 1051 WMI_GRP_NLO_OFL, 1052 WMI_GRP_GTK_OFL, 1053 WMI_GRP_CSA_OFL, 1054 WMI_GRP_CHATTER, 1055 WMI_GRP_TID_ADDBA, 1056 WMI_GRP_MISC, 1057 WMI_GRP_GPIO, 1058 }; 1059 1060 #define WMI_CMD_GRP(grp_id) (((grp_id) << 12) | 0x1) 1061 #define WMI_EVT_GRP_START_ID(grp_id) (((grp_id) << 12) | 0x1) 1062 1063 #define WMI_CMD_UNSUPPORTED 0 1064 1065 /* Command IDs and command events for MAIN FW. */ 1066 enum wmi_cmd_id { 1067 WMI_INIT_CMDID = 0x1, 1068 1069 /* Scan specific commands */ 1070 WMI_START_SCAN_CMDID = WMI_CMD_GRP(WMI_GRP_SCAN), 1071 WMI_STOP_SCAN_CMDID, 1072 WMI_SCAN_CHAN_LIST_CMDID, 1073 WMI_SCAN_SCH_PRIO_TBL_CMDID, 1074 1075 /* PDEV (physical device) specific commands */ 1076 WMI_PDEV_SET_REGDOMAIN_CMDID = WMI_CMD_GRP(WMI_GRP_PDEV), 1077 WMI_PDEV_SET_CHANNEL_CMDID, 1078 WMI_PDEV_SET_PARAM_CMDID, 1079 WMI_PDEV_PKTLOG_ENABLE_CMDID, 1080 WMI_PDEV_PKTLOG_DISABLE_CMDID, 1081 WMI_PDEV_SET_WMM_PARAMS_CMDID, 1082 WMI_PDEV_SET_HT_CAP_IE_CMDID, 1083 WMI_PDEV_SET_VHT_CAP_IE_CMDID, 1084 WMI_PDEV_SET_DSCP_TID_MAP_CMDID, 1085 WMI_PDEV_SET_QUIET_MODE_CMDID, 1086 WMI_PDEV_GREEN_AP_PS_ENABLE_CMDID, 1087 WMI_PDEV_GET_TPC_CONFIG_CMDID, 1088 WMI_PDEV_SET_BASE_MACADDR_CMDID, 1089 1090 /* VDEV (virtual device) specific commands */ 1091 WMI_VDEV_CREATE_CMDID = WMI_CMD_GRP(WMI_GRP_VDEV), 1092 WMI_VDEV_DELETE_CMDID, 1093 WMI_VDEV_START_REQUEST_CMDID, 1094 WMI_VDEV_RESTART_REQUEST_CMDID, 1095 WMI_VDEV_UP_CMDID, 1096 WMI_VDEV_STOP_CMDID, 1097 WMI_VDEV_DOWN_CMDID, 1098 WMI_VDEV_SET_PARAM_CMDID, 1099 WMI_VDEV_INSTALL_KEY_CMDID, 1100 1101 /* peer specific commands */ 1102 WMI_PEER_CREATE_CMDID = WMI_CMD_GRP(WMI_GRP_PEER), 1103 WMI_PEER_DELETE_CMDID, 1104 WMI_PEER_FLUSH_TIDS_CMDID, 1105 WMI_PEER_SET_PARAM_CMDID, 1106 WMI_PEER_ASSOC_CMDID, 1107 WMI_PEER_ADD_WDS_ENTRY_CMDID, 1108 WMI_PEER_REMOVE_WDS_ENTRY_CMDID, 1109 WMI_PEER_MCAST_GROUP_CMDID, 1110 1111 /* beacon/management specific commands */ 1112 WMI_BCN_TX_CMDID = WMI_CMD_GRP(WMI_GRP_MGMT), 1113 WMI_PDEV_SEND_BCN_CMDID, 1114 WMI_BCN_TMPL_CMDID, 1115 WMI_BCN_FILTER_RX_CMDID, 1116 WMI_PRB_REQ_FILTER_RX_CMDID, 1117 WMI_MGMT_TX_CMDID, 1118 WMI_PRB_TMPL_CMDID, 1119 1120 /* commands to directly control BA negotiation directly from host. */ 1121 WMI_ADDBA_CLEAR_RESP_CMDID = WMI_CMD_GRP(WMI_GRP_BA_NEG), 1122 WMI_ADDBA_SEND_CMDID, 1123 WMI_ADDBA_STATUS_CMDID, 1124 WMI_DELBA_SEND_CMDID, 1125 WMI_ADDBA_SET_RESP_CMDID, 1126 WMI_SEND_SINGLEAMSDU_CMDID, 1127 1128 /* Station power save specific config */ 1129 WMI_STA_POWERSAVE_MODE_CMDID = WMI_CMD_GRP(WMI_GRP_STA_PS), 1130 WMI_STA_POWERSAVE_PARAM_CMDID, 1131 WMI_STA_MIMO_PS_MODE_CMDID, 1132 1133 /** DFS-specific commands */ 1134 WMI_PDEV_DFS_ENABLE_CMDID = WMI_CMD_GRP(WMI_GRP_DFS), 1135 WMI_PDEV_DFS_DISABLE_CMDID, 1136 1137 /* Roaming specific commands */ 1138 WMI_ROAM_SCAN_MODE = WMI_CMD_GRP(WMI_GRP_ROAM), 1139 WMI_ROAM_SCAN_RSSI_THRESHOLD, 1140 WMI_ROAM_SCAN_PERIOD, 1141 WMI_ROAM_SCAN_RSSI_CHANGE_THRESHOLD, 1142 WMI_ROAM_AP_PROFILE, 1143 1144 /* offload scan specific commands */ 1145 WMI_OFL_SCAN_ADD_AP_PROFILE = WMI_CMD_GRP(WMI_GRP_OFL_SCAN), 1146 WMI_OFL_SCAN_REMOVE_AP_PROFILE, 1147 WMI_OFL_SCAN_PERIOD, 1148 1149 /* P2P specific commands */ 1150 WMI_P2P_DEV_SET_DEVICE_INFO = WMI_CMD_GRP(WMI_GRP_P2P), 1151 WMI_P2P_DEV_SET_DISCOVERABILITY, 1152 WMI_P2P_GO_SET_BEACON_IE, 1153 WMI_P2P_GO_SET_PROBE_RESP_IE, 1154 WMI_P2P_SET_VENDOR_IE_DATA_CMDID, 1155 1156 /* AP power save specific config */ 1157 WMI_AP_PS_PEER_PARAM_CMDID = WMI_CMD_GRP(WMI_GRP_AP_PS), 1158 WMI_AP_PS_PEER_UAPSD_COEX_CMDID, 1159 1160 /* Rate-control specific commands */ 1161 WMI_PEER_RATE_RETRY_SCHED_CMDID = 1162 WMI_CMD_GRP(WMI_GRP_RATE_CTRL), 1163 1164 /* WLAN Profiling commands. */ 1165 WMI_WLAN_PROFILE_TRIGGER_CMDID = WMI_CMD_GRP(WMI_GRP_PROFILE), 1166 WMI_WLAN_PROFILE_SET_HIST_INTVL_CMDID, 1167 WMI_WLAN_PROFILE_GET_PROFILE_DATA_CMDID, 1168 WMI_WLAN_PROFILE_ENABLE_PROFILE_ID_CMDID, 1169 WMI_WLAN_PROFILE_LIST_PROFILE_ID_CMDID, 1170 1171 /* Suspend resume command Ids */ 1172 WMI_PDEV_SUSPEND_CMDID = WMI_CMD_GRP(WMI_GRP_SUSPEND), 1173 WMI_PDEV_RESUME_CMDID, 1174 1175 /* Beacon filter commands */ 1176 WMI_ADD_BCN_FILTER_CMDID = WMI_CMD_GRP(WMI_GRP_BCN_FILTER), 1177 WMI_RMV_BCN_FILTER_CMDID, 1178 1179 /* WOW Specific WMI commands*/ 1180 WMI_WOW_ADD_WAKE_PATTERN_CMDID = WMI_CMD_GRP(WMI_GRP_WOW), 1181 WMI_WOW_DEL_WAKE_PATTERN_CMDID, 1182 WMI_WOW_ENABLE_DISABLE_WAKE_EVENT_CMDID, 1183 WMI_WOW_ENABLE_CMDID, 1184 WMI_WOW_HOSTWAKEUP_FROM_SLEEP_CMDID, 1185 1186 /* RTT measurement related cmd */ 1187 WMI_RTT_MEASREQ_CMDID = WMI_CMD_GRP(WMI_GRP_RTT), 1188 WMI_RTT_TSF_CMDID, 1189 1190 /* spectral scan commands */ 1191 WMI_VDEV_SPECTRAL_SCAN_CONFIGURE_CMDID = WMI_CMD_GRP(WMI_GRP_SPECTRAL), 1192 WMI_VDEV_SPECTRAL_SCAN_ENABLE_CMDID, 1193 1194 /* F/W stats */ 1195 WMI_REQUEST_STATS_CMDID = WMI_CMD_GRP(WMI_GRP_STATS), 1196 1197 /* ARP OFFLOAD REQUEST*/ 1198 WMI_SET_ARP_NS_OFFLOAD_CMDID = WMI_CMD_GRP(WMI_GRP_ARP_NS_OFL), 1199 1200 /* NS offload confid*/ 1201 WMI_NETWORK_LIST_OFFLOAD_CONFIG_CMDID = WMI_CMD_GRP(WMI_GRP_NLO_OFL), 1202 1203 /* GTK offload Specific WMI commands*/ 1204 WMI_GTK_OFFLOAD_CMDID = WMI_CMD_GRP(WMI_GRP_GTK_OFL), 1205 1206 /* CSA offload Specific WMI commands*/ 1207 WMI_CSA_OFFLOAD_ENABLE_CMDID = WMI_CMD_GRP(WMI_GRP_CSA_OFL), 1208 WMI_CSA_OFFLOAD_CHANSWITCH_CMDID, 1209 1210 /* Chatter commands*/ 1211 WMI_CHATTER_SET_MODE_CMDID = WMI_CMD_GRP(WMI_GRP_CHATTER), 1212 1213 /* addba specific commands */ 1214 WMI_PEER_TID_ADDBA_CMDID = WMI_CMD_GRP(WMI_GRP_TID_ADDBA), 1215 WMI_PEER_TID_DELBA_CMDID, 1216 1217 /* set station mimo powersave method */ 1218 WMI_STA_DTIM_PS_METHOD_CMDID, 1219 /* Configure the Station UAPSD AC Auto Trigger Parameters */ 1220 WMI_STA_UAPSD_AUTO_TRIG_CMDID, 1221 1222 /* STA Keep alive parameter configuration, 1223 * Requires WMI_SERVICE_STA_KEEP_ALIVE 1224 */ 1225 WMI_STA_KEEPALIVE_CMD, 1226 1227 /* misc command group */ 1228 WMI_ECHO_CMDID = WMI_CMD_GRP(WMI_GRP_MISC), 1229 WMI_PDEV_UTF_CMDID, 1230 WMI_DBGLOG_CFG_CMDID, 1231 WMI_PDEV_QVIT_CMDID, 1232 WMI_PDEV_FTM_INTG_CMDID, 1233 WMI_VDEV_SET_KEEPALIVE_CMDID, 1234 WMI_VDEV_GET_KEEPALIVE_CMDID, 1235 WMI_FORCE_FW_HANG_CMDID, 1236 1237 /* GPIO Configuration */ 1238 WMI_GPIO_CONFIG_CMDID = WMI_CMD_GRP(WMI_GRP_GPIO), 1239 WMI_GPIO_OUTPUT_CMDID, 1240 }; 1241 1242 enum wmi_event_id { 1243 WMI_SERVICE_READY_EVENTID = 0x1, 1244 WMI_READY_EVENTID, 1245 WMI_SERVICE_AVAILABLE_EVENTID, 1246 1247 /* Scan specific events */ 1248 WMI_SCAN_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_SCAN), 1249 1250 /* PDEV specific events */ 1251 WMI_PDEV_TPC_CONFIG_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_PDEV), 1252 WMI_CHAN_INFO_EVENTID, 1253 WMI_PHYERR_EVENTID, 1254 1255 /* VDEV specific events */ 1256 WMI_VDEV_START_RESP_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_VDEV), 1257 WMI_VDEV_STOPPED_EVENTID, 1258 WMI_VDEV_INSTALL_KEY_COMPLETE_EVENTID, 1259 1260 /* peer specific events */ 1261 WMI_PEER_STA_KICKOUT_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_PEER), 1262 1263 /* beacon/mgmt specific events */ 1264 WMI_MGMT_RX_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_MGMT), 1265 WMI_HOST_SWBA_EVENTID, 1266 WMI_TBTTOFFSET_UPDATE_EVENTID, 1267 1268 /* ADDBA Related WMI Events*/ 1269 WMI_TX_DELBA_COMPLETE_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_BA_NEG), 1270 WMI_TX_ADDBA_COMPLETE_EVENTID, 1271 1272 /* Roam event to trigger roaming on host */ 1273 WMI_ROAM_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_ROAM), 1274 WMI_PROFILE_MATCH, 1275 1276 /* WoW */ 1277 WMI_WOW_WAKEUP_HOST_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_WOW), 1278 1279 /* RTT */ 1280 WMI_RTT_MEASUREMENT_REPORT_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_RTT), 1281 WMI_TSF_MEASUREMENT_REPORT_EVENTID, 1282 WMI_RTT_ERROR_REPORT_EVENTID, 1283 1284 /* GTK offload */ 1285 WMI_GTK_OFFLOAD_STATUS_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_GTK_OFL), 1286 WMI_GTK_REKEY_FAIL_EVENTID, 1287 1288 /* CSA IE received event */ 1289 WMI_CSA_HANDLING_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_CSA_OFL), 1290 1291 /* Misc events */ 1292 WMI_ECHO_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_MISC), 1293 WMI_PDEV_UTF_EVENTID, 1294 WMI_DEBUG_MESG_EVENTID, 1295 WMI_UPDATE_STATS_EVENTID, 1296 WMI_DEBUG_PRINT_EVENTID, 1297 WMI_DCS_INTERFERENCE_EVENTID, 1298 WMI_PDEV_QVIT_EVENTID, 1299 WMI_WLAN_PROFILE_DATA_EVENTID, 1300 WMI_PDEV_FTM_INTG_EVENTID, 1301 WMI_WLAN_FREQ_AVOID_EVENTID, 1302 WMI_VDEV_GET_KEEPALIVE_EVENTID, 1303 1304 /* GPIO Event */ 1305 WMI_GPIO_INPUT_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_GPIO), 1306 }; 1307 1308 /* Command IDs and command events for 10.X firmware */ 1309 enum wmi_10x_cmd_id { 1310 WMI_10X_START_CMDID = 0x9000, 1311 WMI_10X_END_CMDID = 0x9FFF, 1312 1313 /* initialize the wlan sub system */ 1314 WMI_10X_INIT_CMDID, 1315 1316 /* Scan specific commands */ 1317 1318 WMI_10X_START_SCAN_CMDID = WMI_10X_START_CMDID, 1319 WMI_10X_STOP_SCAN_CMDID, 1320 WMI_10X_SCAN_CHAN_LIST_CMDID, 1321 WMI_10X_ECHO_CMDID, 1322 1323 /* PDEV(physical device) specific commands */ 1324 WMI_10X_PDEV_SET_REGDOMAIN_CMDID, 1325 WMI_10X_PDEV_SET_CHANNEL_CMDID, 1326 WMI_10X_PDEV_SET_PARAM_CMDID, 1327 WMI_10X_PDEV_PKTLOG_ENABLE_CMDID, 1328 WMI_10X_PDEV_PKTLOG_DISABLE_CMDID, 1329 WMI_10X_PDEV_SET_WMM_PARAMS_CMDID, 1330 WMI_10X_PDEV_SET_HT_CAP_IE_CMDID, 1331 WMI_10X_PDEV_SET_VHT_CAP_IE_CMDID, 1332 WMI_10X_PDEV_SET_BASE_MACADDR_CMDID, 1333 WMI_10X_PDEV_SET_DSCP_TID_MAP_CMDID, 1334 WMI_10X_PDEV_SET_QUIET_MODE_CMDID, 1335 WMI_10X_PDEV_GREEN_AP_PS_ENABLE_CMDID, 1336 WMI_10X_PDEV_GET_TPC_CONFIG_CMDID, 1337 1338 /* VDEV(virtual device) specific commands */ 1339 WMI_10X_VDEV_CREATE_CMDID, 1340 WMI_10X_VDEV_DELETE_CMDID, 1341 WMI_10X_VDEV_START_REQUEST_CMDID, 1342 WMI_10X_VDEV_RESTART_REQUEST_CMDID, 1343 WMI_10X_VDEV_UP_CMDID, 1344 WMI_10X_VDEV_STOP_CMDID, 1345 WMI_10X_VDEV_DOWN_CMDID, 1346 WMI_10X_VDEV_STANDBY_RESPONSE_CMDID, 1347 WMI_10X_VDEV_RESUME_RESPONSE_CMDID, 1348 WMI_10X_VDEV_SET_PARAM_CMDID, 1349 WMI_10X_VDEV_INSTALL_KEY_CMDID, 1350 1351 /* peer specific commands */ 1352 WMI_10X_PEER_CREATE_CMDID, 1353 WMI_10X_PEER_DELETE_CMDID, 1354 WMI_10X_PEER_FLUSH_TIDS_CMDID, 1355 WMI_10X_PEER_SET_PARAM_CMDID, 1356 WMI_10X_PEER_ASSOC_CMDID, 1357 WMI_10X_PEER_ADD_WDS_ENTRY_CMDID, 1358 WMI_10X_PEER_REMOVE_WDS_ENTRY_CMDID, 1359 WMI_10X_PEER_MCAST_GROUP_CMDID, 1360 1361 /* beacon/management specific commands */ 1362 1363 WMI_10X_BCN_TX_CMDID, 1364 WMI_10X_BCN_PRB_TMPL_CMDID, 1365 WMI_10X_BCN_FILTER_RX_CMDID, 1366 WMI_10X_PRB_REQ_FILTER_RX_CMDID, 1367 WMI_10X_MGMT_TX_CMDID, 1368 1369 /* commands to directly control ba negotiation directly from host. */ 1370 WMI_10X_ADDBA_CLEAR_RESP_CMDID, 1371 WMI_10X_ADDBA_SEND_CMDID, 1372 WMI_10X_ADDBA_STATUS_CMDID, 1373 WMI_10X_DELBA_SEND_CMDID, 1374 WMI_10X_ADDBA_SET_RESP_CMDID, 1375 WMI_10X_SEND_SINGLEAMSDU_CMDID, 1376 1377 /* Station power save specific config */ 1378 WMI_10X_STA_POWERSAVE_MODE_CMDID, 1379 WMI_10X_STA_POWERSAVE_PARAM_CMDID, 1380 WMI_10X_STA_MIMO_PS_MODE_CMDID, 1381 1382 /* set debug log config */ 1383 WMI_10X_DBGLOG_CFG_CMDID, 1384 1385 /* DFS-specific commands */ 1386 WMI_10X_PDEV_DFS_ENABLE_CMDID, 1387 WMI_10X_PDEV_DFS_DISABLE_CMDID, 1388 1389 /* QVIT specific command id */ 1390 WMI_10X_PDEV_QVIT_CMDID, 1391 1392 /* Offload Scan and Roaming related commands */ 1393 WMI_10X_ROAM_SCAN_MODE, 1394 WMI_10X_ROAM_SCAN_RSSI_THRESHOLD, 1395 WMI_10X_ROAM_SCAN_PERIOD, 1396 WMI_10X_ROAM_SCAN_RSSI_CHANGE_THRESHOLD, 1397 WMI_10X_ROAM_AP_PROFILE, 1398 WMI_10X_OFL_SCAN_ADD_AP_PROFILE, 1399 WMI_10X_OFL_SCAN_REMOVE_AP_PROFILE, 1400 WMI_10X_OFL_SCAN_PERIOD, 1401 1402 /* P2P specific commands */ 1403 WMI_10X_P2P_DEV_SET_DEVICE_INFO, 1404 WMI_10X_P2P_DEV_SET_DISCOVERABILITY, 1405 WMI_10X_P2P_GO_SET_BEACON_IE, 1406 WMI_10X_P2P_GO_SET_PROBE_RESP_IE, 1407 1408 /* AP power save specific config */ 1409 WMI_10X_AP_PS_PEER_PARAM_CMDID, 1410 WMI_10X_AP_PS_PEER_UAPSD_COEX_CMDID, 1411 1412 /* Rate-control specific commands */ 1413 WMI_10X_PEER_RATE_RETRY_SCHED_CMDID, 1414 1415 /* WLAN Profiling commands. */ 1416 WMI_10X_WLAN_PROFILE_TRIGGER_CMDID, 1417 WMI_10X_WLAN_PROFILE_SET_HIST_INTVL_CMDID, 1418 WMI_10X_WLAN_PROFILE_GET_PROFILE_DATA_CMDID, 1419 WMI_10X_WLAN_PROFILE_ENABLE_PROFILE_ID_CMDID, 1420 WMI_10X_WLAN_PROFILE_LIST_PROFILE_ID_CMDID, 1421 1422 /* Suspend resume command Ids */ 1423 WMI_10X_PDEV_SUSPEND_CMDID, 1424 WMI_10X_PDEV_RESUME_CMDID, 1425 1426 /* Beacon filter commands */ 1427 WMI_10X_ADD_BCN_FILTER_CMDID, 1428 WMI_10X_RMV_BCN_FILTER_CMDID, 1429 1430 /* WOW Specific WMI commands*/ 1431 WMI_10X_WOW_ADD_WAKE_PATTERN_CMDID, 1432 WMI_10X_WOW_DEL_WAKE_PATTERN_CMDID, 1433 WMI_10X_WOW_ENABLE_DISABLE_WAKE_EVENT_CMDID, 1434 WMI_10X_WOW_ENABLE_CMDID, 1435 WMI_10X_WOW_HOSTWAKEUP_FROM_SLEEP_CMDID, 1436 1437 /* RTT measurement related cmd */ 1438 WMI_10X_RTT_MEASREQ_CMDID, 1439 WMI_10X_RTT_TSF_CMDID, 1440 1441 /* transmit beacon by value */ 1442 WMI_10X_PDEV_SEND_BCN_CMDID, 1443 1444 /* F/W stats */ 1445 WMI_10X_VDEV_SPECTRAL_SCAN_CONFIGURE_CMDID, 1446 WMI_10X_VDEV_SPECTRAL_SCAN_ENABLE_CMDID, 1447 WMI_10X_REQUEST_STATS_CMDID, 1448 1449 /* GPIO Configuration */ 1450 WMI_10X_GPIO_CONFIG_CMDID, 1451 WMI_10X_GPIO_OUTPUT_CMDID, 1452 1453 WMI_10X_PDEV_UTF_CMDID = WMI_10X_END_CMDID - 1, 1454 }; 1455 1456 enum wmi_10x_event_id { 1457 WMI_10X_SERVICE_READY_EVENTID = 0x8000, 1458 WMI_10X_READY_EVENTID, 1459 WMI_10X_START_EVENTID = 0x9000, 1460 WMI_10X_END_EVENTID = 0x9FFF, 1461 1462 /* Scan specific events */ 1463 WMI_10X_SCAN_EVENTID = WMI_10X_START_EVENTID, 1464 WMI_10X_ECHO_EVENTID, 1465 WMI_10X_DEBUG_MESG_EVENTID, 1466 WMI_10X_UPDATE_STATS_EVENTID, 1467 1468 /* Instantaneous RSSI event */ 1469 WMI_10X_INST_RSSI_STATS_EVENTID, 1470 1471 /* VDEV specific events */ 1472 WMI_10X_VDEV_START_RESP_EVENTID, 1473 WMI_10X_VDEV_STANDBY_REQ_EVENTID, 1474 WMI_10X_VDEV_RESUME_REQ_EVENTID, 1475 WMI_10X_VDEV_STOPPED_EVENTID, 1476 1477 /* peer specific events */ 1478 WMI_10X_PEER_STA_KICKOUT_EVENTID, 1479 1480 /* beacon/mgmt specific events */ 1481 WMI_10X_HOST_SWBA_EVENTID, 1482 WMI_10X_TBTTOFFSET_UPDATE_EVENTID, 1483 WMI_10X_MGMT_RX_EVENTID, 1484 1485 /* Channel stats event */ 1486 WMI_10X_CHAN_INFO_EVENTID, 1487 1488 /* PHY Error specific WMI event */ 1489 WMI_10X_PHYERR_EVENTID, 1490 1491 /* Roam event to trigger roaming on host */ 1492 WMI_10X_ROAM_EVENTID, 1493 1494 /* matching AP found from list of profiles */ 1495 WMI_10X_PROFILE_MATCH, 1496 1497 /* debug print message used for tracing FW code while debugging */ 1498 WMI_10X_DEBUG_PRINT_EVENTID, 1499 /* VI spoecific event */ 1500 WMI_10X_PDEV_QVIT_EVENTID, 1501 /* FW code profile data in response to profile request */ 1502 WMI_10X_WLAN_PROFILE_DATA_EVENTID, 1503 1504 /*RTT related event ID*/ 1505 WMI_10X_RTT_MEASUREMENT_REPORT_EVENTID, 1506 WMI_10X_TSF_MEASUREMENT_REPORT_EVENTID, 1507 WMI_10X_RTT_ERROR_REPORT_EVENTID, 1508 1509 WMI_10X_WOW_WAKEUP_HOST_EVENTID, 1510 WMI_10X_DCS_INTERFERENCE_EVENTID, 1511 1512 /* TPC config for the current operating channel */ 1513 WMI_10X_PDEV_TPC_CONFIG_EVENTID, 1514 1515 WMI_10X_GPIO_INPUT_EVENTID, 1516 WMI_10X_PDEV_UTF_EVENTID = WMI_10X_END_EVENTID - 1, 1517 }; 1518 1519 enum wmi_10_2_cmd_id { 1520 WMI_10_2_START_CMDID = 0x9000, 1521 WMI_10_2_END_CMDID = 0x9FFF, 1522 WMI_10_2_INIT_CMDID, 1523 WMI_10_2_START_SCAN_CMDID = WMI_10_2_START_CMDID, 1524 WMI_10_2_STOP_SCAN_CMDID, 1525 WMI_10_2_SCAN_CHAN_LIST_CMDID, 1526 WMI_10_2_ECHO_CMDID, 1527 WMI_10_2_PDEV_SET_REGDOMAIN_CMDID, 1528 WMI_10_2_PDEV_SET_CHANNEL_CMDID, 1529 WMI_10_2_PDEV_SET_PARAM_CMDID, 1530 WMI_10_2_PDEV_PKTLOG_ENABLE_CMDID, 1531 WMI_10_2_PDEV_PKTLOG_DISABLE_CMDID, 1532 WMI_10_2_PDEV_SET_WMM_PARAMS_CMDID, 1533 WMI_10_2_PDEV_SET_HT_CAP_IE_CMDID, 1534 WMI_10_2_PDEV_SET_VHT_CAP_IE_CMDID, 1535 WMI_10_2_PDEV_SET_BASE_MACADDR_CMDID, 1536 WMI_10_2_PDEV_SET_QUIET_MODE_CMDID, 1537 WMI_10_2_PDEV_GREEN_AP_PS_ENABLE_CMDID, 1538 WMI_10_2_PDEV_GET_TPC_CONFIG_CMDID, 1539 WMI_10_2_VDEV_CREATE_CMDID, 1540 WMI_10_2_VDEV_DELETE_CMDID, 1541 WMI_10_2_VDEV_START_REQUEST_CMDID, 1542 WMI_10_2_VDEV_RESTART_REQUEST_CMDID, 1543 WMI_10_2_VDEV_UP_CMDID, 1544 WMI_10_2_VDEV_STOP_CMDID, 1545 WMI_10_2_VDEV_DOWN_CMDID, 1546 WMI_10_2_VDEV_STANDBY_RESPONSE_CMDID, 1547 WMI_10_2_VDEV_RESUME_RESPONSE_CMDID, 1548 WMI_10_2_VDEV_SET_PARAM_CMDID, 1549 WMI_10_2_VDEV_INSTALL_KEY_CMDID, 1550 WMI_10_2_VDEV_SET_DSCP_TID_MAP_CMDID, 1551 WMI_10_2_PEER_CREATE_CMDID, 1552 WMI_10_2_PEER_DELETE_CMDID, 1553 WMI_10_2_PEER_FLUSH_TIDS_CMDID, 1554 WMI_10_2_PEER_SET_PARAM_CMDID, 1555 WMI_10_2_PEER_ASSOC_CMDID, 1556 WMI_10_2_PEER_ADD_WDS_ENTRY_CMDID, 1557 WMI_10_2_PEER_UPDATE_WDS_ENTRY_CMDID, 1558 WMI_10_2_PEER_REMOVE_WDS_ENTRY_CMDID, 1559 WMI_10_2_PEER_MCAST_GROUP_CMDID, 1560 WMI_10_2_BCN_TX_CMDID, 1561 WMI_10_2_BCN_PRB_TMPL_CMDID, 1562 WMI_10_2_BCN_FILTER_RX_CMDID, 1563 WMI_10_2_PRB_REQ_FILTER_RX_CMDID, 1564 WMI_10_2_MGMT_TX_CMDID, 1565 WMI_10_2_ADDBA_CLEAR_RESP_CMDID, 1566 WMI_10_2_ADDBA_SEND_CMDID, 1567 WMI_10_2_ADDBA_STATUS_CMDID, 1568 WMI_10_2_DELBA_SEND_CMDID, 1569 WMI_10_2_ADDBA_SET_RESP_CMDID, 1570 WMI_10_2_SEND_SINGLEAMSDU_CMDID, 1571 WMI_10_2_STA_POWERSAVE_MODE_CMDID, 1572 WMI_10_2_STA_POWERSAVE_PARAM_CMDID, 1573 WMI_10_2_STA_MIMO_PS_MODE_CMDID, 1574 WMI_10_2_DBGLOG_CFG_CMDID, 1575 WMI_10_2_PDEV_DFS_ENABLE_CMDID, 1576 WMI_10_2_PDEV_DFS_DISABLE_CMDID, 1577 WMI_10_2_PDEV_QVIT_CMDID, 1578 WMI_10_2_ROAM_SCAN_MODE, 1579 WMI_10_2_ROAM_SCAN_RSSI_THRESHOLD, 1580 WMI_10_2_ROAM_SCAN_PERIOD, 1581 WMI_10_2_ROAM_SCAN_RSSI_CHANGE_THRESHOLD, 1582 WMI_10_2_ROAM_AP_PROFILE, 1583 WMI_10_2_OFL_SCAN_ADD_AP_PROFILE, 1584 WMI_10_2_OFL_SCAN_REMOVE_AP_PROFILE, 1585 WMI_10_2_OFL_SCAN_PERIOD, 1586 WMI_10_2_P2P_DEV_SET_DEVICE_INFO, 1587 WMI_10_2_P2P_DEV_SET_DISCOVERABILITY, 1588 WMI_10_2_P2P_GO_SET_BEACON_IE, 1589 WMI_10_2_P2P_GO_SET_PROBE_RESP_IE, 1590 WMI_10_2_AP_PS_PEER_PARAM_CMDID, 1591 WMI_10_2_AP_PS_PEER_UAPSD_COEX_CMDID, 1592 WMI_10_2_PEER_RATE_RETRY_SCHED_CMDID, 1593 WMI_10_2_WLAN_PROFILE_TRIGGER_CMDID, 1594 WMI_10_2_WLAN_PROFILE_SET_HIST_INTVL_CMDID, 1595 WMI_10_2_WLAN_PROFILE_GET_PROFILE_DATA_CMDID, 1596 WMI_10_2_WLAN_PROFILE_ENABLE_PROFILE_ID_CMDID, 1597 WMI_10_2_WLAN_PROFILE_LIST_PROFILE_ID_CMDID, 1598 WMI_10_2_PDEV_SUSPEND_CMDID, 1599 WMI_10_2_PDEV_RESUME_CMDID, 1600 WMI_10_2_ADD_BCN_FILTER_CMDID, 1601 WMI_10_2_RMV_BCN_FILTER_CMDID, 1602 WMI_10_2_WOW_ADD_WAKE_PATTERN_CMDID, 1603 WMI_10_2_WOW_DEL_WAKE_PATTERN_CMDID, 1604 WMI_10_2_WOW_ENABLE_DISABLE_WAKE_EVENT_CMDID, 1605 WMI_10_2_WOW_ENABLE_CMDID, 1606 WMI_10_2_WOW_HOSTWAKEUP_FROM_SLEEP_CMDID, 1607 WMI_10_2_RTT_MEASREQ_CMDID, 1608 WMI_10_2_RTT_TSF_CMDID, 1609 WMI_10_2_RTT_KEEPALIVE_CMDID, 1610 WMI_10_2_PDEV_SEND_BCN_CMDID, 1611 WMI_10_2_VDEV_SPECTRAL_SCAN_CONFIGURE_CMDID, 1612 WMI_10_2_VDEV_SPECTRAL_SCAN_ENABLE_CMDID, 1613 WMI_10_2_REQUEST_STATS_CMDID, 1614 WMI_10_2_GPIO_CONFIG_CMDID, 1615 WMI_10_2_GPIO_OUTPUT_CMDID, 1616 WMI_10_2_VDEV_RATEMASK_CMDID, 1617 WMI_10_2_PDEV_SMART_ANT_ENABLE_CMDID, 1618 WMI_10_2_PDEV_SMART_ANT_SET_RX_ANTENNA_CMDID, 1619 WMI_10_2_PEER_SMART_ANT_SET_TX_ANTENNA_CMDID, 1620 WMI_10_2_PEER_SMART_ANT_SET_TRAIN_INFO_CMDID, 1621 WMI_10_2_PEER_SMART_ANT_SET_NODE_CONFIG_OPS_CMDID, 1622 WMI_10_2_FORCE_FW_HANG_CMDID, 1623 WMI_10_2_PDEV_SET_ANTENNA_SWITCH_TABLE_CMDID, 1624 WMI_10_2_PDEV_SET_CTL_TABLE_CMDID, 1625 WMI_10_2_PDEV_SET_MIMOGAIN_TABLE_CMDID, 1626 WMI_10_2_PDEV_RATEPWR_TABLE_CMDID, 1627 WMI_10_2_PDEV_RATEPWR_CHAINMSK_TABLE_CMDID, 1628 WMI_10_2_PDEV_GET_INFO, 1629 WMI_10_2_VDEV_GET_INFO, 1630 WMI_10_2_VDEV_ATF_REQUEST_CMDID, 1631 WMI_10_2_PEER_ATF_REQUEST_CMDID, 1632 WMI_10_2_PDEV_GET_TEMPERATURE_CMDID, 1633 WMI_10_2_MU_CAL_START_CMDID, 1634 WMI_10_2_SET_LTEU_CONFIG_CMDID, 1635 WMI_10_2_SET_CCA_PARAMS, 1636 WMI_10_2_PDEV_BSS_CHAN_INFO_REQUEST_CMDID, 1637 WMI_10_2_FWTEST_CMDID, 1638 WMI_10_2_PDEV_SET_BB_TIMING_CONFIG_CMDID, 1639 WMI_10_2_PDEV_UTF_CMDID = WMI_10_2_END_CMDID - 1, 1640 }; 1641 1642 enum wmi_10_2_event_id { 1643 WMI_10_2_SERVICE_READY_EVENTID = 0x8000, 1644 WMI_10_2_READY_EVENTID, 1645 WMI_10_2_DEBUG_MESG_EVENTID, 1646 WMI_10_2_START_EVENTID = 0x9000, 1647 WMI_10_2_END_EVENTID = 0x9FFF, 1648 WMI_10_2_SCAN_EVENTID = WMI_10_2_START_EVENTID, 1649 WMI_10_2_ECHO_EVENTID, 1650 WMI_10_2_UPDATE_STATS_EVENTID, 1651 WMI_10_2_INST_RSSI_STATS_EVENTID, 1652 WMI_10_2_VDEV_START_RESP_EVENTID, 1653 WMI_10_2_VDEV_STANDBY_REQ_EVENTID, 1654 WMI_10_2_VDEV_RESUME_REQ_EVENTID, 1655 WMI_10_2_VDEV_STOPPED_EVENTID, 1656 WMI_10_2_PEER_STA_KICKOUT_EVENTID, 1657 WMI_10_2_HOST_SWBA_EVENTID, 1658 WMI_10_2_TBTTOFFSET_UPDATE_EVENTID, 1659 WMI_10_2_MGMT_RX_EVENTID, 1660 WMI_10_2_CHAN_INFO_EVENTID, 1661 WMI_10_2_PHYERR_EVENTID, 1662 WMI_10_2_ROAM_EVENTID, 1663 WMI_10_2_PROFILE_MATCH, 1664 WMI_10_2_DEBUG_PRINT_EVENTID, 1665 WMI_10_2_PDEV_QVIT_EVENTID, 1666 WMI_10_2_WLAN_PROFILE_DATA_EVENTID, 1667 WMI_10_2_RTT_MEASUREMENT_REPORT_EVENTID, 1668 WMI_10_2_TSF_MEASUREMENT_REPORT_EVENTID, 1669 WMI_10_2_RTT_ERROR_REPORT_EVENTID, 1670 WMI_10_2_RTT_KEEPALIVE_EVENTID, 1671 WMI_10_2_WOW_WAKEUP_HOST_EVENTID, 1672 WMI_10_2_DCS_INTERFERENCE_EVENTID, 1673 WMI_10_2_PDEV_TPC_CONFIG_EVENTID, 1674 WMI_10_2_GPIO_INPUT_EVENTID, 1675 WMI_10_2_PEER_RATECODE_LIST_EVENTID, 1676 WMI_10_2_GENERIC_BUFFER_EVENTID, 1677 WMI_10_2_MCAST_BUF_RELEASE_EVENTID, 1678 WMI_10_2_MCAST_LIST_AGEOUT_EVENTID, 1679 WMI_10_2_WDS_PEER_EVENTID, 1680 WMI_10_2_PEER_STA_PS_STATECHG_EVENTID, 1681 WMI_10_2_PDEV_TEMPERATURE_EVENTID, 1682 WMI_10_2_MU_REPORT_EVENTID, 1683 WMI_10_2_PDEV_BSS_CHAN_INFO_EVENTID, 1684 WMI_10_2_PDEV_UTF_EVENTID = WMI_10_2_END_EVENTID - 1, 1685 }; 1686 1687 enum wmi_10_4_cmd_id { 1688 WMI_10_4_START_CMDID = 0x9000, 1689 WMI_10_4_END_CMDID = 0x9FFF, 1690 WMI_10_4_INIT_CMDID, 1691 WMI_10_4_START_SCAN_CMDID = WMI_10_4_START_CMDID, 1692 WMI_10_4_STOP_SCAN_CMDID, 1693 WMI_10_4_SCAN_CHAN_LIST_CMDID, 1694 WMI_10_4_SCAN_SCH_PRIO_TBL_CMDID, 1695 WMI_10_4_SCAN_UPDATE_REQUEST_CMDID, 1696 WMI_10_4_ECHO_CMDID, 1697 WMI_10_4_PDEV_SET_REGDOMAIN_CMDID, 1698 WMI_10_4_PDEV_SET_CHANNEL_CMDID, 1699 WMI_10_4_PDEV_SET_PARAM_CMDID, 1700 WMI_10_4_PDEV_PKTLOG_ENABLE_CMDID, 1701 WMI_10_4_PDEV_PKTLOG_DISABLE_CMDID, 1702 WMI_10_4_PDEV_SET_WMM_PARAMS_CMDID, 1703 WMI_10_4_PDEV_SET_HT_CAP_IE_CMDID, 1704 WMI_10_4_PDEV_SET_VHT_CAP_IE_CMDID, 1705 WMI_10_4_PDEV_SET_BASE_MACADDR_CMDID, 1706 WMI_10_4_PDEV_SET_DSCP_TID_MAP_CMDID, 1707 WMI_10_4_PDEV_SET_QUIET_MODE_CMDID, 1708 WMI_10_4_PDEV_GREEN_AP_PS_ENABLE_CMDID, 1709 WMI_10_4_PDEV_GET_TPC_CONFIG_CMDID, 1710 WMI_10_4_VDEV_CREATE_CMDID, 1711 WMI_10_4_VDEV_DELETE_CMDID, 1712 WMI_10_4_VDEV_START_REQUEST_CMDID, 1713 WMI_10_4_VDEV_RESTART_REQUEST_CMDID, 1714 WMI_10_4_VDEV_UP_CMDID, 1715 WMI_10_4_VDEV_STOP_CMDID, 1716 WMI_10_4_VDEV_DOWN_CMDID, 1717 WMI_10_4_VDEV_STANDBY_RESPONSE_CMDID, 1718 WMI_10_4_VDEV_RESUME_RESPONSE_CMDID, 1719 WMI_10_4_VDEV_SET_PARAM_CMDID, 1720 WMI_10_4_VDEV_INSTALL_KEY_CMDID, 1721 WMI_10_4_WLAN_PEER_CACHING_ADD_PEER_CMDID, 1722 WMI_10_4_WLAN_PEER_CACHING_EVICT_PEER_CMDID, 1723 WMI_10_4_WLAN_PEER_CACHING_RESTORE_PEER_CMDID, 1724 WMI_10_4_WLAN_PEER_CACHING_PRINT_ALL_PEERS_INFO_CMDID, 1725 WMI_10_4_PEER_CREATE_CMDID, 1726 WMI_10_4_PEER_DELETE_CMDID, 1727 WMI_10_4_PEER_FLUSH_TIDS_CMDID, 1728 WMI_10_4_PEER_SET_PARAM_CMDID, 1729 WMI_10_4_PEER_ASSOC_CMDID, 1730 WMI_10_4_PEER_ADD_WDS_ENTRY_CMDID, 1731 WMI_10_4_PEER_UPDATE_WDS_ENTRY_CMDID, 1732 WMI_10_4_PEER_REMOVE_WDS_ENTRY_CMDID, 1733 WMI_10_4_PEER_ADD_PROXY_STA_ENTRY_CMDID, 1734 WMI_10_4_PEER_MCAST_GROUP_CMDID, 1735 WMI_10_4_BCN_TX_CMDID, 1736 WMI_10_4_PDEV_SEND_BCN_CMDID, 1737 WMI_10_4_BCN_PRB_TMPL_CMDID, 1738 WMI_10_4_BCN_FILTER_RX_CMDID, 1739 WMI_10_4_PRB_REQ_FILTER_RX_CMDID, 1740 WMI_10_4_MGMT_TX_CMDID, 1741 WMI_10_4_PRB_TMPL_CMDID, 1742 WMI_10_4_ADDBA_CLEAR_RESP_CMDID, 1743 WMI_10_4_ADDBA_SEND_CMDID, 1744 WMI_10_4_ADDBA_STATUS_CMDID, 1745 WMI_10_4_DELBA_SEND_CMDID, 1746 WMI_10_4_ADDBA_SET_RESP_CMDID, 1747 WMI_10_4_SEND_SINGLEAMSDU_CMDID, 1748 WMI_10_4_STA_POWERSAVE_MODE_CMDID, 1749 WMI_10_4_STA_POWERSAVE_PARAM_CMDID, 1750 WMI_10_4_STA_MIMO_PS_MODE_CMDID, 1751 WMI_10_4_DBGLOG_CFG_CMDID, 1752 WMI_10_4_PDEV_DFS_ENABLE_CMDID, 1753 WMI_10_4_PDEV_DFS_DISABLE_CMDID, 1754 WMI_10_4_PDEV_QVIT_CMDID, 1755 WMI_10_4_ROAM_SCAN_MODE, 1756 WMI_10_4_ROAM_SCAN_RSSI_THRESHOLD, 1757 WMI_10_4_ROAM_SCAN_PERIOD, 1758 WMI_10_4_ROAM_SCAN_RSSI_CHANGE_THRESHOLD, 1759 WMI_10_4_ROAM_AP_PROFILE, 1760 WMI_10_4_OFL_SCAN_ADD_AP_PROFILE, 1761 WMI_10_4_OFL_SCAN_REMOVE_AP_PROFILE, 1762 WMI_10_4_OFL_SCAN_PERIOD, 1763 WMI_10_4_P2P_DEV_SET_DEVICE_INFO, 1764 WMI_10_4_P2P_DEV_SET_DISCOVERABILITY, 1765 WMI_10_4_P2P_GO_SET_BEACON_IE, 1766 WMI_10_4_P2P_GO_SET_PROBE_RESP_IE, 1767 WMI_10_4_P2P_SET_VENDOR_IE_DATA_CMDID, 1768 WMI_10_4_AP_PS_PEER_PARAM_CMDID, 1769 WMI_10_4_AP_PS_PEER_UAPSD_COEX_CMDID, 1770 WMI_10_4_PEER_RATE_RETRY_SCHED_CMDID, 1771 WMI_10_4_WLAN_PROFILE_TRIGGER_CMDID, 1772 WMI_10_4_WLAN_PROFILE_SET_HIST_INTVL_CMDID, 1773 WMI_10_4_WLAN_PROFILE_GET_PROFILE_DATA_CMDID, 1774 WMI_10_4_WLAN_PROFILE_ENABLE_PROFILE_ID_CMDID, 1775 WMI_10_4_WLAN_PROFILE_LIST_PROFILE_ID_CMDID, 1776 WMI_10_4_PDEV_SUSPEND_CMDID, 1777 WMI_10_4_PDEV_RESUME_CMDID, 1778 WMI_10_4_ADD_BCN_FILTER_CMDID, 1779 WMI_10_4_RMV_BCN_FILTER_CMDID, 1780 WMI_10_4_WOW_ADD_WAKE_PATTERN_CMDID, 1781 WMI_10_4_WOW_DEL_WAKE_PATTERN_CMDID, 1782 WMI_10_4_WOW_ENABLE_DISABLE_WAKE_EVENT_CMDID, 1783 WMI_10_4_WOW_ENABLE_CMDID, 1784 WMI_10_4_WOW_HOSTWAKEUP_FROM_SLEEP_CMDID, 1785 WMI_10_4_RTT_MEASREQ_CMDID, 1786 WMI_10_4_RTT_TSF_CMDID, 1787 WMI_10_4_RTT_KEEPALIVE_CMDID, 1788 WMI_10_4_OEM_REQ_CMDID, 1789 WMI_10_4_NAN_CMDID, 1790 WMI_10_4_VDEV_SPECTRAL_SCAN_CONFIGURE_CMDID, 1791 WMI_10_4_VDEV_SPECTRAL_SCAN_ENABLE_CMDID, 1792 WMI_10_4_REQUEST_STATS_CMDID, 1793 WMI_10_4_GPIO_CONFIG_CMDID, 1794 WMI_10_4_GPIO_OUTPUT_CMDID, 1795 WMI_10_4_VDEV_RATEMASK_CMDID, 1796 WMI_10_4_CSA_OFFLOAD_ENABLE_CMDID, 1797 WMI_10_4_GTK_OFFLOAD_CMDID, 1798 WMI_10_4_QBOOST_CFG_CMDID, 1799 WMI_10_4_CSA_OFFLOAD_CHANSWITCH_CMDID, 1800 WMI_10_4_PDEV_SMART_ANT_ENABLE_CMDID, 1801 WMI_10_4_PDEV_SMART_ANT_SET_RX_ANTENNA_CMDID, 1802 WMI_10_4_PEER_SMART_ANT_SET_TX_ANTENNA_CMDID, 1803 WMI_10_4_PEER_SMART_ANT_SET_TRAIN_INFO_CMDID, 1804 WMI_10_4_PEER_SMART_ANT_SET_NODE_CONFIG_OPS_CMDID, 1805 WMI_10_4_VDEV_SET_KEEPALIVE_CMDID, 1806 WMI_10_4_VDEV_GET_KEEPALIVE_CMDID, 1807 WMI_10_4_FORCE_FW_HANG_CMDID, 1808 WMI_10_4_PDEV_SET_ANTENNA_SWITCH_TABLE_CMDID, 1809 WMI_10_4_PDEV_SET_CTL_TABLE_CMDID, 1810 WMI_10_4_PDEV_SET_MIMOGAIN_TABLE_CMDID, 1811 WMI_10_4_PDEV_RATEPWR_TABLE_CMDID, 1812 WMI_10_4_PDEV_RATEPWR_CHAINMSK_TABLE_CMDID, 1813 WMI_10_4_PDEV_FIPS_CMDID, 1814 WMI_10_4_TT_SET_CONF_CMDID, 1815 WMI_10_4_FWTEST_CMDID, 1816 WMI_10_4_VDEV_ATF_REQUEST_CMDID, 1817 WMI_10_4_PEER_ATF_REQUEST_CMDID, 1818 WMI_10_4_PDEV_GET_ANI_CCK_CONFIG_CMDID, 1819 WMI_10_4_PDEV_GET_ANI_OFDM_CONFIG_CMDID, 1820 WMI_10_4_PDEV_RESERVE_AST_ENTRY_CMDID, 1821 WMI_10_4_PDEV_GET_NFCAL_POWER_CMDID, 1822 WMI_10_4_PDEV_GET_TPC_CMDID, 1823 WMI_10_4_PDEV_GET_AST_INFO_CMDID, 1824 WMI_10_4_VDEV_SET_DSCP_TID_MAP_CMDID, 1825 WMI_10_4_PDEV_GET_TEMPERATURE_CMDID, 1826 WMI_10_4_PDEV_GET_INFO_CMDID, 1827 WMI_10_4_VDEV_GET_INFO_CMDID, 1828 WMI_10_4_VDEV_FILTER_NEIGHBOR_RX_PACKETS_CMDID, 1829 WMI_10_4_MU_CAL_START_CMDID, 1830 WMI_10_4_SET_CCA_PARAMS_CMDID, 1831 WMI_10_4_PDEV_BSS_CHAN_INFO_REQUEST_CMDID, 1832 WMI_10_4_EXT_RESOURCE_CFG_CMDID, 1833 WMI_10_4_VDEV_SET_IE_CMDID, 1834 WMI_10_4_SET_LTEU_CONFIG_CMDID, 1835 WMI_10_4_ATF_SSID_GROUPING_REQUEST_CMDID, 1836 WMI_10_4_PEER_ATF_EXT_REQUEST_CMDID, 1837 WMI_10_4_SET_PERIODIC_CHANNEL_STATS_CONFIG, 1838 WMI_10_4_PEER_BWF_REQUEST_CMDID, 1839 WMI_10_4_BTCOEX_CFG_CMDID, 1840 WMI_10_4_PEER_TX_MU_TXMIT_COUNT_CMDID, 1841 WMI_10_4_PEER_TX_MU_TXMIT_RSTCNT_CMDID, 1842 WMI_10_4_PEER_GID_USERPOS_LIST_CMDID, 1843 WMI_10_4_PDEV_CHECK_CAL_VERSION_CMDID, 1844 WMI_10_4_COEX_VERSION_CFG_CMID, 1845 WMI_10_4_PDEV_GET_RX_FILTER_CMDID, 1846 WMI_10_4_PDEV_EXTENDED_NSS_CFG_CMDID, 1847 WMI_10_4_VDEV_SET_SCAN_NAC_RSSI_CMDID, 1848 WMI_10_4_PROG_GPIO_BAND_SELECT_CMDID, 1849 WMI_10_4_CONFIG_SMART_LOGGING_CMDID, 1850 WMI_10_4_DEBUG_FATAL_CONDITION_CMDID, 1851 WMI_10_4_GET_TSF_TIMER_CMDID, 1852 WMI_10_4_PDEV_GET_TPC_TABLE_CMDID, 1853 WMI_10_4_VDEV_SIFS_TRIGGER_TIME_CMDID, 1854 WMI_10_4_PDEV_WDS_ENTRY_LIST_CMDID, 1855 WMI_10_4_TDLS_SET_STATE_CMDID, 1856 WMI_10_4_TDLS_PEER_UPDATE_CMDID, 1857 WMI_10_4_TDLS_SET_OFFCHAN_MODE_CMDID, 1858 WMI_10_4_PDEV_SEND_FD_CMDID, 1859 WMI_10_4_ENABLE_FILS_CMDID, 1860 WMI_10_4_PDEV_SET_BRIDGE_MACADDR_CMDID, 1861 WMI_10_4_ATF_GROUP_WMM_AC_CONFIG_REQUEST_CMDID, 1862 WMI_10_4_RADAR_FOUND_CMDID, 1863 WMI_10_4_PDEV_UTF_CMDID = WMI_10_4_END_CMDID - 1, 1864 }; 1865 1866 enum wmi_10_4_event_id { 1867 WMI_10_4_SERVICE_READY_EVENTID = 0x8000, 1868 WMI_10_4_READY_EVENTID, 1869 WMI_10_4_DEBUG_MESG_EVENTID, 1870 WMI_10_4_START_EVENTID = 0x9000, 1871 WMI_10_4_END_EVENTID = 0x9FFF, 1872 WMI_10_4_SCAN_EVENTID = WMI_10_4_START_EVENTID, 1873 WMI_10_4_ECHO_EVENTID, 1874 WMI_10_4_UPDATE_STATS_EVENTID, 1875 WMI_10_4_INST_RSSI_STATS_EVENTID, 1876 WMI_10_4_VDEV_START_RESP_EVENTID, 1877 WMI_10_4_VDEV_STANDBY_REQ_EVENTID, 1878 WMI_10_4_VDEV_RESUME_REQ_EVENTID, 1879 WMI_10_4_VDEV_STOPPED_EVENTID, 1880 WMI_10_4_PEER_STA_KICKOUT_EVENTID, 1881 WMI_10_4_HOST_SWBA_EVENTID, 1882 WMI_10_4_TBTTOFFSET_UPDATE_EVENTID, 1883 WMI_10_4_MGMT_RX_EVENTID, 1884 WMI_10_4_CHAN_INFO_EVENTID, 1885 WMI_10_4_PHYERR_EVENTID, 1886 WMI_10_4_ROAM_EVENTID, 1887 WMI_10_4_PROFILE_MATCH, 1888 WMI_10_4_DEBUG_PRINT_EVENTID, 1889 WMI_10_4_PDEV_QVIT_EVENTID, 1890 WMI_10_4_WLAN_PROFILE_DATA_EVENTID, 1891 WMI_10_4_RTT_MEASUREMENT_REPORT_EVENTID, 1892 WMI_10_4_TSF_MEASUREMENT_REPORT_EVENTID, 1893 WMI_10_4_RTT_ERROR_REPORT_EVENTID, 1894 WMI_10_4_RTT_KEEPALIVE_EVENTID, 1895 WMI_10_4_OEM_CAPABILITY_EVENTID, 1896 WMI_10_4_OEM_MEASUREMENT_REPORT_EVENTID, 1897 WMI_10_4_OEM_ERROR_REPORT_EVENTID, 1898 WMI_10_4_NAN_EVENTID, 1899 WMI_10_4_WOW_WAKEUP_HOST_EVENTID, 1900 WMI_10_4_GTK_OFFLOAD_STATUS_EVENTID, 1901 WMI_10_4_GTK_REKEY_FAIL_EVENTID, 1902 WMI_10_4_DCS_INTERFERENCE_EVENTID, 1903 WMI_10_4_PDEV_TPC_CONFIG_EVENTID, 1904 WMI_10_4_CSA_HANDLING_EVENTID, 1905 WMI_10_4_GPIO_INPUT_EVENTID, 1906 WMI_10_4_PEER_RATECODE_LIST_EVENTID, 1907 WMI_10_4_GENERIC_BUFFER_EVENTID, 1908 WMI_10_4_MCAST_BUF_RELEASE_EVENTID, 1909 WMI_10_4_MCAST_LIST_AGEOUT_EVENTID, 1910 WMI_10_4_VDEV_GET_KEEPALIVE_EVENTID, 1911 WMI_10_4_WDS_PEER_EVENTID, 1912 WMI_10_4_PEER_STA_PS_STATECHG_EVENTID, 1913 WMI_10_4_PDEV_FIPS_EVENTID, 1914 WMI_10_4_TT_STATS_EVENTID, 1915 WMI_10_4_PDEV_CHANNEL_HOPPING_EVENTID, 1916 WMI_10_4_PDEV_ANI_CCK_LEVEL_EVENTID, 1917 WMI_10_4_PDEV_ANI_OFDM_LEVEL_EVENTID, 1918 WMI_10_4_PDEV_RESERVE_AST_ENTRY_EVENTID, 1919 WMI_10_4_PDEV_NFCAL_POWER_EVENTID, 1920 WMI_10_4_PDEV_TPC_EVENTID, 1921 WMI_10_4_PDEV_GET_AST_INFO_EVENTID, 1922 WMI_10_4_PDEV_TEMPERATURE_EVENTID, 1923 WMI_10_4_PDEV_NFCAL_POWER_ALL_CHANNELS_EVENTID, 1924 WMI_10_4_PDEV_BSS_CHAN_INFO_EVENTID, 1925 WMI_10_4_MU_REPORT_EVENTID, 1926 WMI_10_4_TX_DATA_TRAFFIC_CTRL_EVENTID, 1927 WMI_10_4_PEER_TX_MU_TXMIT_COUNT_EVENTID, 1928 WMI_10_4_PEER_GID_USERPOS_LIST_EVENTID, 1929 WMI_10_4_PDEV_CHECK_CAL_VERSION_EVENTID, 1930 WMI_10_4_ATF_PEER_STATS_EVENTID, 1931 WMI_10_4_PDEV_GET_RX_FILTER_EVENTID, 1932 WMI_10_4_NAC_RSSI_EVENTID, 1933 WMI_10_4_DEBUG_FATAL_CONDITION_EVENTID, 1934 WMI_10_4_GET_TSF_TIMER_RESP_EVENTID, 1935 WMI_10_4_PDEV_TPC_TABLE_EVENTID, 1936 WMI_10_4_PDEV_WDS_ENTRY_LIST_EVENTID, 1937 WMI_10_4_TDLS_PEER_EVENTID, 1938 WMI_10_4_HOST_SWFDA_EVENTID, 1939 WMI_10_4_ESP_ESTIMATE_EVENTID, 1940 WMI_10_4_DFS_STATUS_CHECK_EVENTID, 1941 WMI_10_4_PDEV_UTF_EVENTID = WMI_10_4_END_EVENTID - 1, 1942 }; 1943 1944 enum wmi_phy_mode { 1945 MODE_11A = 0, /* 11a Mode */ 1946 MODE_11G = 1, /* 11b/g Mode */ 1947 MODE_11B = 2, /* 11b Mode */ 1948 MODE_11GONLY = 3, /* 11g only Mode */ 1949 MODE_11NA_HT20 = 4, /* 11a HT20 mode */ 1950 MODE_11NG_HT20 = 5, /* 11g HT20 mode */ 1951 MODE_11NA_HT40 = 6, /* 11a HT40 mode */ 1952 MODE_11NG_HT40 = 7, /* 11g HT40 mode */ 1953 MODE_11AC_VHT20 = 8, 1954 MODE_11AC_VHT40 = 9, 1955 MODE_11AC_VHT80 = 10, 1956 /* MODE_11AC_VHT160 = 11, */ 1957 MODE_11AC_VHT20_2G = 11, 1958 MODE_11AC_VHT40_2G = 12, 1959 MODE_11AC_VHT80_2G = 13, 1960 MODE_11AC_VHT80_80 = 14, 1961 MODE_11AC_VHT160 = 15, 1962 MODE_UNKNOWN = 16, 1963 MODE_MAX = 16 1964 }; 1965 1966 static inline const char *ath10k_wmi_phymode_str(enum wmi_phy_mode mode) 1967 { 1968 switch (mode) { 1969 case MODE_11A: 1970 return "11a"; 1971 case MODE_11G: 1972 return "11g"; 1973 case MODE_11B: 1974 return "11b"; 1975 case MODE_11GONLY: 1976 return "11gonly"; 1977 case MODE_11NA_HT20: 1978 return "11na-ht20"; 1979 case MODE_11NG_HT20: 1980 return "11ng-ht20"; 1981 case MODE_11NA_HT40: 1982 return "11na-ht40"; 1983 case MODE_11NG_HT40: 1984 return "11ng-ht40"; 1985 case MODE_11AC_VHT20: 1986 return "11ac-vht20"; 1987 case MODE_11AC_VHT40: 1988 return "11ac-vht40"; 1989 case MODE_11AC_VHT80: 1990 return "11ac-vht80"; 1991 case MODE_11AC_VHT160: 1992 return "11ac-vht160"; 1993 case MODE_11AC_VHT80_80: 1994 return "11ac-vht80+80"; 1995 case MODE_11AC_VHT20_2G: 1996 return "11ac-vht20-2g"; 1997 case MODE_11AC_VHT40_2G: 1998 return "11ac-vht40-2g"; 1999 case MODE_11AC_VHT80_2G: 2000 return "11ac-vht80-2g"; 2001 case MODE_UNKNOWN: 2002 /* skip */ 2003 break; 2004 2005 /* no default handler to allow compiler to check that the 2006 * enum is fully handled 2007 */ 2008 } 2009 2010 return "<unknown>"; 2011 } 2012 2013 #define WMI_CHAN_LIST_TAG 0x1 2014 #define WMI_SSID_LIST_TAG 0x2 2015 #define WMI_BSSID_LIST_TAG 0x3 2016 #define WMI_IE_TAG 0x4 2017 2018 struct wmi_channel { 2019 __le32 mhz; 2020 __le32 band_center_freq1; 2021 __le32 band_center_freq2; /* valid for 11ac, 80plus80 */ 2022 union { 2023 __le32 flags; /* WMI_CHAN_FLAG_ */ 2024 struct { 2025 u8 mode; /* only 6 LSBs */ 2026 } __packed; 2027 } __packed; 2028 union { 2029 __le32 reginfo0; 2030 struct { 2031 /* note: power unit is 0.5 dBm */ 2032 u8 min_power; 2033 u8 max_power; 2034 u8 reg_power; 2035 u8 reg_classid; 2036 } __packed; 2037 } __packed; 2038 union { 2039 __le32 reginfo1; 2040 struct { 2041 u8 antenna_max; 2042 u8 max_tx_power; 2043 } __packed; 2044 } __packed; 2045 } __packed; 2046 2047 struct wmi_channel_arg { 2048 u32 freq; 2049 u32 band_center_freq1; 2050 u32 band_center_freq2; 2051 bool passive; 2052 bool allow_ibss; 2053 bool allow_ht; 2054 bool allow_vht; 2055 bool ht40plus; 2056 bool chan_radar; 2057 /* note: power unit is 0.5 dBm */ 2058 u32 min_power; 2059 u32 max_power; 2060 u32 max_reg_power; 2061 u32 max_antenna_gain; 2062 u32 reg_class_id; 2063 enum wmi_phy_mode mode; 2064 }; 2065 2066 enum wmi_channel_change_cause { 2067 WMI_CHANNEL_CHANGE_CAUSE_NONE = 0, 2068 WMI_CHANNEL_CHANGE_CAUSE_CSA, 2069 }; 2070 2071 #define WMI_CHAN_FLAG_HT40_PLUS (1 << 6) 2072 #define WMI_CHAN_FLAG_PASSIVE (1 << 7) 2073 #define WMI_CHAN_FLAG_ADHOC_ALLOWED (1 << 8) 2074 #define WMI_CHAN_FLAG_AP_DISABLED (1 << 9) 2075 #define WMI_CHAN_FLAG_DFS (1 << 10) 2076 #define WMI_CHAN_FLAG_ALLOW_HT (1 << 11) 2077 #define WMI_CHAN_FLAG_ALLOW_VHT (1 << 12) 2078 2079 /* Indicate reason for channel switch */ 2080 #define WMI_CHANNEL_CHANGE_CAUSE_CSA (1 << 13) 2081 2082 #define WMI_MAX_SPATIAL_STREAM 3 /* default max ss */ 2083 2084 /* HT Capabilities*/ 2085 #define WMI_HT_CAP_ENABLED 0x0001 /* HT Enabled/ disabled */ 2086 #define WMI_HT_CAP_HT20_SGI 0x0002 /* Short Guard Interval with HT20 */ 2087 #define WMI_HT_CAP_DYNAMIC_SMPS 0x0004 /* Dynamic MIMO powersave */ 2088 #define WMI_HT_CAP_TX_STBC 0x0008 /* B3 TX STBC */ 2089 #define WMI_HT_CAP_TX_STBC_MASK_SHIFT 3 2090 #define WMI_HT_CAP_RX_STBC 0x0030 /* B4-B5 RX STBC */ 2091 #define WMI_HT_CAP_RX_STBC_MASK_SHIFT 4 2092 #define WMI_HT_CAP_LDPC 0x0040 /* LDPC supported */ 2093 #define WMI_HT_CAP_L_SIG_TXOP_PROT 0x0080 /* L-SIG TXOP Protection */ 2094 #define WMI_HT_CAP_MPDU_DENSITY 0x0700 /* MPDU Density */ 2095 #define WMI_HT_CAP_MPDU_DENSITY_MASK_SHIFT 8 2096 #define WMI_HT_CAP_HT40_SGI 0x0800 2097 #define WMI_HT_CAP_RX_LDPC 0x1000 /* LDPC RX support */ 2098 #define WMI_HT_CAP_TX_LDPC 0x2000 /* LDPC TX support */ 2099 2100 #define WMI_HT_CAP_DEFAULT_ALL (WMI_HT_CAP_ENABLED | \ 2101 WMI_HT_CAP_HT20_SGI | \ 2102 WMI_HT_CAP_HT40_SGI | \ 2103 WMI_HT_CAP_TX_STBC | \ 2104 WMI_HT_CAP_RX_STBC | \ 2105 WMI_HT_CAP_LDPC) 2106 2107 /* 2108 * WMI_VHT_CAP_* these maps to ieee 802.11ac vht capability information 2109 * field. The fields not defined here are not supported, or reserved. 2110 * Do not change these masks and if you have to add new one follow the 2111 * bitmask as specified by 802.11ac draft. 2112 */ 2113 2114 #define WMI_VHT_CAP_MAX_MPDU_LEN_MASK 0x00000003 2115 #define WMI_VHT_CAP_RX_LDPC 0x00000010 2116 #define WMI_VHT_CAP_SGI_80MHZ 0x00000020 2117 #define WMI_VHT_CAP_SGI_160MHZ 0x00000040 2118 #define WMI_VHT_CAP_TX_STBC 0x00000080 2119 #define WMI_VHT_CAP_RX_STBC_MASK 0x00000300 2120 #define WMI_VHT_CAP_RX_STBC_MASK_SHIFT 8 2121 #define WMI_VHT_CAP_SU_BFER 0x00000800 2122 #define WMI_VHT_CAP_SU_BFEE 0x00001000 2123 #define WMI_VHT_CAP_MAX_CS_ANT_MASK 0x0000E000 2124 #define WMI_VHT_CAP_MAX_CS_ANT_MASK_SHIFT 13 2125 #define WMI_VHT_CAP_MAX_SND_DIM_MASK 0x00070000 2126 #define WMI_VHT_CAP_MAX_SND_DIM_MASK_SHIFT 16 2127 #define WMI_VHT_CAP_MU_BFER 0x00080000 2128 #define WMI_VHT_CAP_MU_BFEE 0x00100000 2129 #define WMI_VHT_CAP_MAX_AMPDU_LEN_EXP 0x03800000 2130 #define WMI_VHT_CAP_MAX_AMPDU_LEN_EXP_SHIFT 23 2131 #define WMI_VHT_CAP_RX_FIXED_ANT 0x10000000 2132 #define WMI_VHT_CAP_TX_FIXED_ANT 0x20000000 2133 2134 /* The following also refer for max HT AMSDU */ 2135 #define WMI_VHT_CAP_MAX_MPDU_LEN_3839 0x00000000 2136 #define WMI_VHT_CAP_MAX_MPDU_LEN_7935 0x00000001 2137 #define WMI_VHT_CAP_MAX_MPDU_LEN_11454 0x00000002 2138 2139 #define WMI_VHT_CAP_DEFAULT_ALL (WMI_VHT_CAP_MAX_MPDU_LEN_11454 | \ 2140 WMI_VHT_CAP_RX_LDPC | \ 2141 WMI_VHT_CAP_SGI_80MHZ | \ 2142 WMI_VHT_CAP_TX_STBC | \ 2143 WMI_VHT_CAP_RX_STBC_MASK | \ 2144 WMI_VHT_CAP_MAX_AMPDU_LEN_EXP | \ 2145 WMI_VHT_CAP_RX_FIXED_ANT | \ 2146 WMI_VHT_CAP_TX_FIXED_ANT) 2147 2148 /* 2149 * Interested readers refer to Rx/Tx MCS Map definition as defined in 2150 * 802.11ac 2151 */ 2152 #define WMI_VHT_MAX_MCS_4_SS_MASK(r, ss) ((3 & (r)) << (((ss) - 1) << 1)) 2153 #define WMI_VHT_MAX_SUPP_RATE_MASK 0x1fff0000 2154 #define WMI_VHT_MAX_SUPP_RATE_MASK_SHIFT 16 2155 2156 enum { 2157 REGDMN_MODE_11A = 0x00001, /* 11a channels */ 2158 REGDMN_MODE_TURBO = 0x00002, /* 11a turbo-only channels */ 2159 REGDMN_MODE_11B = 0x00004, /* 11b channels */ 2160 REGDMN_MODE_PUREG = 0x00008, /* 11g channels (OFDM only) */ 2161 REGDMN_MODE_11G = 0x00008, /* XXX historical */ 2162 REGDMN_MODE_108G = 0x00020, /* 11a+Turbo channels */ 2163 REGDMN_MODE_108A = 0x00040, /* 11g+Turbo channels */ 2164 REGDMN_MODE_XR = 0x00100, /* XR channels */ 2165 REGDMN_MODE_11A_HALF_RATE = 0x00200, /* 11A half rate channels */ 2166 REGDMN_MODE_11A_QUARTER_RATE = 0x00400, /* 11A quarter rate channels */ 2167 REGDMN_MODE_11NG_HT20 = 0x00800, /* 11N-G HT20 channels */ 2168 REGDMN_MODE_11NA_HT20 = 0x01000, /* 11N-A HT20 channels */ 2169 REGDMN_MODE_11NG_HT40PLUS = 0x02000, /* 11N-G HT40 + channels */ 2170 REGDMN_MODE_11NG_HT40MINUS = 0x04000, /* 11N-G HT40 - channels */ 2171 REGDMN_MODE_11NA_HT40PLUS = 0x08000, /* 11N-A HT40 + channels */ 2172 REGDMN_MODE_11NA_HT40MINUS = 0x10000, /* 11N-A HT40 - channels */ 2173 REGDMN_MODE_11AC_VHT20 = 0x20000, /* 5Ghz, VHT20 */ 2174 REGDMN_MODE_11AC_VHT40PLUS = 0x40000, /* 5Ghz, VHT40 + channels */ 2175 REGDMN_MODE_11AC_VHT40MINUS = 0x80000, /* 5Ghz VHT40 - channels */ 2176 REGDMN_MODE_11AC_VHT80 = 0x100000, /* 5Ghz, VHT80 channels */ 2177 REGDMN_MODE_11AC_VHT160 = 0x200000, /* 5Ghz, VHT160 channels */ 2178 REGDMN_MODE_11AC_VHT80_80 = 0x400000, /* 5Ghz, VHT80+80 channels */ 2179 REGDMN_MODE_ALL = 0xffffffff 2180 }; 2181 2182 #define REGDMN_CAP1_CHAN_HALF_RATE 0x00000001 2183 #define REGDMN_CAP1_CHAN_QUARTER_RATE 0x00000002 2184 #define REGDMN_CAP1_CHAN_HAL49GHZ 0x00000004 2185 2186 /* regulatory capabilities */ 2187 #define REGDMN_EEPROM_EEREGCAP_EN_FCC_MIDBAND 0x0040 2188 #define REGDMN_EEPROM_EEREGCAP_EN_KK_U1_EVEN 0x0080 2189 #define REGDMN_EEPROM_EEREGCAP_EN_KK_U2 0x0100 2190 #define REGDMN_EEPROM_EEREGCAP_EN_KK_MIDBAND 0x0200 2191 #define REGDMN_EEPROM_EEREGCAP_EN_KK_U1_ODD 0x0400 2192 #define REGDMN_EEPROM_EEREGCAP_EN_KK_NEW_11A 0x0800 2193 2194 struct hal_reg_capabilities { 2195 /* regdomain value specified in EEPROM */ 2196 __le32 eeprom_rd; 2197 /*regdomain */ 2198 __le32 eeprom_rd_ext; 2199 /* CAP1 capabilities bit map. */ 2200 __le32 regcap1; 2201 /* REGDMN EEPROM CAP. */ 2202 __le32 regcap2; 2203 /* REGDMN MODE */ 2204 __le32 wireless_modes; 2205 __le32 low_2ghz_chan; 2206 __le32 high_2ghz_chan; 2207 __le32 low_5ghz_chan; 2208 __le32 high_5ghz_chan; 2209 } __packed; 2210 2211 enum wlan_mode_capability { 2212 WHAL_WLAN_11A_CAPABILITY = 0x1, 2213 WHAL_WLAN_11G_CAPABILITY = 0x2, 2214 WHAL_WLAN_11AG_CAPABILITY = 0x3, 2215 }; 2216 2217 /* structure used by FW for requesting host memory */ 2218 struct wlan_host_mem_req { 2219 /* ID of the request */ 2220 __le32 req_id; 2221 /* size of the of each unit */ 2222 __le32 unit_size; 2223 /* flags to indicate that 2224 * the number units is dependent 2225 * on number of resources(num vdevs num peers .. etc) 2226 */ 2227 __le32 num_unit_info; 2228 /* 2229 * actual number of units to allocate . if flags in the num_unit_info 2230 * indicate that number of units is tied to number of a particular 2231 * resource to allocate then num_units filed is set to 0 and host 2232 * will derive the number units from number of the resources it is 2233 * requesting. 2234 */ 2235 __le32 num_units; 2236 } __packed; 2237 2238 /* 2239 * The following struct holds optional payload for 2240 * wmi_service_ready_event,e.g., 11ac pass some of the 2241 * device capability to the host. 2242 */ 2243 struct wmi_service_ready_event { 2244 __le32 sw_version; 2245 __le32 sw_version_1; 2246 __le32 abi_version; 2247 /* WMI_PHY_CAPABILITY */ 2248 __le32 phy_capability; 2249 /* Maximum number of frag table entries that SW will populate less 1 */ 2250 __le32 max_frag_entry; 2251 __le32 wmi_service_bitmap[16]; 2252 __le32 num_rf_chains; 2253 /* 2254 * The following field is only valid for service type 2255 * WMI_SERVICE_11AC 2256 */ 2257 __le32 ht_cap_info; /* WMI HT Capability */ 2258 __le32 vht_cap_info; /* VHT capability info field of 802.11ac */ 2259 __le32 vht_supp_mcs; /* VHT Supported MCS Set field Rx/Tx same */ 2260 __le32 hw_min_tx_power; 2261 __le32 hw_max_tx_power; 2262 struct hal_reg_capabilities hal_reg_capabilities; 2263 __le32 sys_cap_info; 2264 __le32 min_pkt_size_enable; /* Enterprise mode short pkt enable */ 2265 /* 2266 * Max beacon and Probe Response IE offload size 2267 * (includes optional P2P IEs) 2268 */ 2269 __le32 max_bcn_ie_size; 2270 /* 2271 * request to host to allocate a chuck of memory and pss it down to FW 2272 * via WM_INIT. FW uses this as FW extesnsion memory for saving its 2273 * data structures. Only valid for low latency interfaces like PCIE 2274 * where FW can access this memory directly (or) by DMA. 2275 */ 2276 __le32 num_mem_reqs; 2277 struct wlan_host_mem_req mem_reqs[0]; 2278 } __packed; 2279 2280 /* This is the definition from 10.X firmware branch */ 2281 struct wmi_10x_service_ready_event { 2282 __le32 sw_version; 2283 __le32 abi_version; 2284 2285 /* WMI_PHY_CAPABILITY */ 2286 __le32 phy_capability; 2287 2288 /* Maximum number of frag table entries that SW will populate less 1 */ 2289 __le32 max_frag_entry; 2290 __le32 wmi_service_bitmap[16]; 2291 __le32 num_rf_chains; 2292 2293 /* 2294 * The following field is only valid for service type 2295 * WMI_SERVICE_11AC 2296 */ 2297 __le32 ht_cap_info; /* WMI HT Capability */ 2298 __le32 vht_cap_info; /* VHT capability info field of 802.11ac */ 2299 __le32 vht_supp_mcs; /* VHT Supported MCS Set field Rx/Tx same */ 2300 __le32 hw_min_tx_power; 2301 __le32 hw_max_tx_power; 2302 2303 struct hal_reg_capabilities hal_reg_capabilities; 2304 2305 __le32 sys_cap_info; 2306 __le32 min_pkt_size_enable; /* Enterprise mode short pkt enable */ 2307 2308 /* 2309 * request to host to allocate a chuck of memory and pss it down to FW 2310 * via WM_INIT. FW uses this as FW extesnsion memory for saving its 2311 * data structures. Only valid for low latency interfaces like PCIE 2312 * where FW can access this memory directly (or) by DMA. 2313 */ 2314 __le32 num_mem_reqs; 2315 2316 struct wlan_host_mem_req mem_reqs[0]; 2317 } __packed; 2318 2319 #define WMI_SERVICE_READY_TIMEOUT_HZ (5 * HZ) 2320 #define WMI_UNIFIED_READY_TIMEOUT_HZ (5 * HZ) 2321 2322 struct wmi_ready_event { 2323 __le32 sw_version; 2324 __le32 abi_version; 2325 struct wmi_mac_addr mac_addr; 2326 __le32 status; 2327 } __packed; 2328 2329 struct wmi_resource_config { 2330 /* number of virtual devices (VAPs) to support */ 2331 __le32 num_vdevs; 2332 2333 /* number of peer nodes to support */ 2334 __le32 num_peers; 2335 2336 /* 2337 * In offload mode target supports features like WOW, chatter and 2338 * other protocol offloads. In order to support them some 2339 * functionalities like reorder buffering, PN checking need to be 2340 * done in target. This determines maximum number of peers supported 2341 * by target in offload mode 2342 */ 2343 __le32 num_offload_peers; 2344 2345 /* For target-based RX reordering */ 2346 __le32 num_offload_reorder_bufs; 2347 2348 /* number of keys per peer */ 2349 __le32 num_peer_keys; 2350 2351 /* total number of TX/RX data TIDs */ 2352 __le32 num_tids; 2353 2354 /* 2355 * max skid for resolving hash collisions 2356 * 2357 * The address search table is sparse, so that if two MAC addresses 2358 * result in the same hash value, the second of these conflicting 2359 * entries can slide to the next index in the address search table, 2360 * and use it, if it is unoccupied. This ast_skid_limit parameter 2361 * specifies the upper bound on how many subsequent indices to search 2362 * over to find an unoccupied space. 2363 */ 2364 __le32 ast_skid_limit; 2365 2366 /* 2367 * the nominal chain mask for transmit 2368 * 2369 * The chain mask may be modified dynamically, e.g. to operate AP 2370 * tx with a reduced number of chains if no clients are associated. 2371 * This configuration parameter specifies the nominal chain-mask that 2372 * should be used when not operating with a reduced set of tx chains. 2373 */ 2374 __le32 tx_chain_mask; 2375 2376 /* 2377 * the nominal chain mask for receive 2378 * 2379 * The chain mask may be modified dynamically, e.g. for a client 2380 * to use a reduced number of chains for receive if the traffic to 2381 * the client is low enough that it doesn't require downlink MIMO 2382 * or antenna diversity. 2383 * This configuration parameter specifies the nominal chain-mask that 2384 * should be used when not operating with a reduced set of rx chains. 2385 */ 2386 __le32 rx_chain_mask; 2387 2388 /* 2389 * what rx reorder timeout (ms) to use for the AC 2390 * 2391 * Each WMM access class (voice, video, best-effort, background) will 2392 * have its own timeout value to dictate how long to wait for missing 2393 * rx MPDUs to arrive before flushing subsequent MPDUs that have 2394 * already been received. 2395 * This parameter specifies the timeout in milliseconds for each 2396 * class. 2397 */ 2398 __le32 rx_timeout_pri_vi; 2399 __le32 rx_timeout_pri_vo; 2400 __le32 rx_timeout_pri_be; 2401 __le32 rx_timeout_pri_bk; 2402 2403 /* 2404 * what mode the rx should decap packets to 2405 * 2406 * MAC can decap to RAW (no decap), native wifi or Ethernet types 2407 * THis setting also determines the default TX behavior, however TX 2408 * behavior can be modified on a per VAP basis during VAP init 2409 */ 2410 __le32 rx_decap_mode; 2411 2412 /* what is the maximum number of scan requests that can be queued */ 2413 __le32 scan_max_pending_reqs; 2414 2415 /* maximum VDEV that could use BMISS offload */ 2416 __le32 bmiss_offload_max_vdev; 2417 2418 /* maximum VDEV that could use offload roaming */ 2419 __le32 roam_offload_max_vdev; 2420 2421 /* maximum AP profiles that would push to offload roaming */ 2422 __le32 roam_offload_max_ap_profiles; 2423 2424 /* 2425 * how many groups to use for mcast->ucast conversion 2426 * 2427 * The target's WAL maintains a table to hold information regarding 2428 * which peers belong to a given multicast group, so that if 2429 * multicast->unicast conversion is enabled, the target can convert 2430 * multicast tx frames to a series of unicast tx frames, to each 2431 * peer within the multicast group. 2432 This num_mcast_groups configuration parameter tells the target how 2433 * many multicast groups to provide storage for within its multicast 2434 * group membership table. 2435 */ 2436 __le32 num_mcast_groups; 2437 2438 /* 2439 * size to alloc for the mcast membership table 2440 * 2441 * This num_mcast_table_elems configuration parameter tells the 2442 * target how many peer elements it needs to provide storage for in 2443 * its multicast group membership table. 2444 * These multicast group membership table elements are shared by the 2445 * multicast groups stored within the table. 2446 */ 2447 __le32 num_mcast_table_elems; 2448 2449 /* 2450 * whether/how to do multicast->unicast conversion 2451 * 2452 * This configuration parameter specifies whether the target should 2453 * perform multicast --> unicast conversion on transmit, and if so, 2454 * what to do if it finds no entries in its multicast group 2455 * membership table for the multicast IP address in the tx frame. 2456 * Configuration value: 2457 * 0 -> Do not perform multicast to unicast conversion. 2458 * 1 -> Convert multicast frames to unicast, if the IP multicast 2459 * address from the tx frame is found in the multicast group 2460 * membership table. If the IP multicast address is not found, 2461 * drop the frame. 2462 * 2 -> Convert multicast frames to unicast, if the IP multicast 2463 * address from the tx frame is found in the multicast group 2464 * membership table. If the IP multicast address is not found, 2465 * transmit the frame as multicast. 2466 */ 2467 __le32 mcast2ucast_mode; 2468 2469 /* 2470 * how much memory to allocate for a tx PPDU dbg log 2471 * 2472 * This parameter controls how much memory the target will allocate 2473 * to store a log of tx PPDU meta-information (how large the PPDU 2474 * was, when it was sent, whether it was successful, etc.) 2475 */ 2476 __le32 tx_dbg_log_size; 2477 2478 /* how many AST entries to be allocated for WDS */ 2479 __le32 num_wds_entries; 2480 2481 /* 2482 * MAC DMA burst size, e.g., For target PCI limit can be 2483 * 0 -default, 1 256B 2484 */ 2485 __le32 dma_burst_size; 2486 2487 /* 2488 * Fixed delimiters to be inserted after every MPDU to 2489 * account for interface latency to avoid underrun. 2490 */ 2491 __le32 mac_aggr_delim; 2492 2493 /* 2494 * determine whether target is responsible for detecting duplicate 2495 * non-aggregate MPDU and timing out stale fragments. 2496 * 2497 * A-MPDU reordering is always performed on the target. 2498 * 2499 * 0: target responsible for frag timeout and dup checking 2500 * 1: host responsible for frag timeout and dup checking 2501 */ 2502 __le32 rx_skip_defrag_timeout_dup_detection_check; 2503 2504 /* 2505 * Configuration for VoW : 2506 * No of Video Nodes to be supported 2507 * and Max no of descriptors for each Video link (node). 2508 */ 2509 __le32 vow_config; 2510 2511 /* maximum VDEV that could use GTK offload */ 2512 __le32 gtk_offload_max_vdev; 2513 2514 /* Number of msdu descriptors target should use */ 2515 __le32 num_msdu_desc; 2516 2517 /* 2518 * Max. number of Tx fragments per MSDU 2519 * This parameter controls the max number of Tx fragments per MSDU. 2520 * This is sent by the target as part of the WMI_SERVICE_READY event 2521 * and is overridden by the OS shim as required. 2522 */ 2523 __le32 max_frag_entries; 2524 } __packed; 2525 2526 struct wmi_resource_config_10x { 2527 /* number of virtual devices (VAPs) to support */ 2528 __le32 num_vdevs; 2529 2530 /* number of peer nodes to support */ 2531 __le32 num_peers; 2532 2533 /* number of keys per peer */ 2534 __le32 num_peer_keys; 2535 2536 /* total number of TX/RX data TIDs */ 2537 __le32 num_tids; 2538 2539 /* 2540 * max skid for resolving hash collisions 2541 * 2542 * The address search table is sparse, so that if two MAC addresses 2543 * result in the same hash value, the second of these conflicting 2544 * entries can slide to the next index in the address search table, 2545 * and use it, if it is unoccupied. This ast_skid_limit parameter 2546 * specifies the upper bound on how many subsequent indices to search 2547 * over to find an unoccupied space. 2548 */ 2549 __le32 ast_skid_limit; 2550 2551 /* 2552 * the nominal chain mask for transmit 2553 * 2554 * The chain mask may be modified dynamically, e.g. to operate AP 2555 * tx with a reduced number of chains if no clients are associated. 2556 * This configuration parameter specifies the nominal chain-mask that 2557 * should be used when not operating with a reduced set of tx chains. 2558 */ 2559 __le32 tx_chain_mask; 2560 2561 /* 2562 * the nominal chain mask for receive 2563 * 2564 * The chain mask may be modified dynamically, e.g. for a client 2565 * to use a reduced number of chains for receive if the traffic to 2566 * the client is low enough that it doesn't require downlink MIMO 2567 * or antenna diversity. 2568 * This configuration parameter specifies the nominal chain-mask that 2569 * should be used when not operating with a reduced set of rx chains. 2570 */ 2571 __le32 rx_chain_mask; 2572 2573 /* 2574 * what rx reorder timeout (ms) to use for the AC 2575 * 2576 * Each WMM access class (voice, video, best-effort, background) will 2577 * have its own timeout value to dictate how long to wait for missing 2578 * rx MPDUs to arrive before flushing subsequent MPDUs that have 2579 * already been received. 2580 * This parameter specifies the timeout in milliseconds for each 2581 * class. 2582 */ 2583 __le32 rx_timeout_pri_vi; 2584 __le32 rx_timeout_pri_vo; 2585 __le32 rx_timeout_pri_be; 2586 __le32 rx_timeout_pri_bk; 2587 2588 /* 2589 * what mode the rx should decap packets to 2590 * 2591 * MAC can decap to RAW (no decap), native wifi or Ethernet types 2592 * THis setting also determines the default TX behavior, however TX 2593 * behavior can be modified on a per VAP basis during VAP init 2594 */ 2595 __le32 rx_decap_mode; 2596 2597 /* what is the maximum number of scan requests that can be queued */ 2598 __le32 scan_max_pending_reqs; 2599 2600 /* maximum VDEV that could use BMISS offload */ 2601 __le32 bmiss_offload_max_vdev; 2602 2603 /* maximum VDEV that could use offload roaming */ 2604 __le32 roam_offload_max_vdev; 2605 2606 /* maximum AP profiles that would push to offload roaming */ 2607 __le32 roam_offload_max_ap_profiles; 2608 2609 /* 2610 * how many groups to use for mcast->ucast conversion 2611 * 2612 * The target's WAL maintains a table to hold information regarding 2613 * which peers belong to a given multicast group, so that if 2614 * multicast->unicast conversion is enabled, the target can convert 2615 * multicast tx frames to a series of unicast tx frames, to each 2616 * peer within the multicast group. 2617 This num_mcast_groups configuration parameter tells the target how 2618 * many multicast groups to provide storage for within its multicast 2619 * group membership table. 2620 */ 2621 __le32 num_mcast_groups; 2622 2623 /* 2624 * size to alloc for the mcast membership table 2625 * 2626 * This num_mcast_table_elems configuration parameter tells the 2627 * target how many peer elements it needs to provide storage for in 2628 * its multicast group membership table. 2629 * These multicast group membership table elements are shared by the 2630 * multicast groups stored within the table. 2631 */ 2632 __le32 num_mcast_table_elems; 2633 2634 /* 2635 * whether/how to do multicast->unicast conversion 2636 * 2637 * This configuration parameter specifies whether the target should 2638 * perform multicast --> unicast conversion on transmit, and if so, 2639 * what to do if it finds no entries in its multicast group 2640 * membership table for the multicast IP address in the tx frame. 2641 * Configuration value: 2642 * 0 -> Do not perform multicast to unicast conversion. 2643 * 1 -> Convert multicast frames to unicast, if the IP multicast 2644 * address from the tx frame is found in the multicast group 2645 * membership table. If the IP multicast address is not found, 2646 * drop the frame. 2647 * 2 -> Convert multicast frames to unicast, if the IP multicast 2648 * address from the tx frame is found in the multicast group 2649 * membership table. If the IP multicast address is not found, 2650 * transmit the frame as multicast. 2651 */ 2652 __le32 mcast2ucast_mode; 2653 2654 /* 2655 * how much memory to allocate for a tx PPDU dbg log 2656 * 2657 * This parameter controls how much memory the target will allocate 2658 * to store a log of tx PPDU meta-information (how large the PPDU 2659 * was, when it was sent, whether it was successful, etc.) 2660 */ 2661 __le32 tx_dbg_log_size; 2662 2663 /* how many AST entries to be allocated for WDS */ 2664 __le32 num_wds_entries; 2665 2666 /* 2667 * MAC DMA burst size, e.g., For target PCI limit can be 2668 * 0 -default, 1 256B 2669 */ 2670 __le32 dma_burst_size; 2671 2672 /* 2673 * Fixed delimiters to be inserted after every MPDU to 2674 * account for interface latency to avoid underrun. 2675 */ 2676 __le32 mac_aggr_delim; 2677 2678 /* 2679 * determine whether target is responsible for detecting duplicate 2680 * non-aggregate MPDU and timing out stale fragments. 2681 * 2682 * A-MPDU reordering is always performed on the target. 2683 * 2684 * 0: target responsible for frag timeout and dup checking 2685 * 1: host responsible for frag timeout and dup checking 2686 */ 2687 __le32 rx_skip_defrag_timeout_dup_detection_check; 2688 2689 /* 2690 * Configuration for VoW : 2691 * No of Video Nodes to be supported 2692 * and Max no of descriptors for each Video link (node). 2693 */ 2694 __le32 vow_config; 2695 2696 /* Number of msdu descriptors target should use */ 2697 __le32 num_msdu_desc; 2698 2699 /* 2700 * Max. number of Tx fragments per MSDU 2701 * This parameter controls the max number of Tx fragments per MSDU. 2702 * This is sent by the target as part of the WMI_SERVICE_READY event 2703 * and is overridden by the OS shim as required. 2704 */ 2705 __le32 max_frag_entries; 2706 } __packed; 2707 2708 enum wmi_10_2_feature_mask { 2709 WMI_10_2_RX_BATCH_MODE = BIT(0), 2710 WMI_10_2_ATF_CONFIG = BIT(1), 2711 WMI_10_2_COEX_GPIO = BIT(3), 2712 WMI_10_2_BSS_CHAN_INFO = BIT(6), 2713 WMI_10_2_PEER_STATS = BIT(7), 2714 }; 2715 2716 struct wmi_resource_config_10_2 { 2717 struct wmi_resource_config_10x common; 2718 __le32 max_peer_ext_stats; 2719 __le32 smart_ant_cap; /* 0-disable, 1-enable */ 2720 __le32 bk_min_free; 2721 __le32 be_min_free; 2722 __le32 vi_min_free; 2723 __le32 vo_min_free; 2724 __le32 feature_mask; 2725 } __packed; 2726 2727 #define NUM_UNITS_IS_NUM_VDEVS BIT(0) 2728 #define NUM_UNITS_IS_NUM_PEERS BIT(1) 2729 #define NUM_UNITS_IS_NUM_ACTIVE_PEERS BIT(2) 2730 2731 struct wmi_resource_config_10_4 { 2732 /* Number of virtual devices (VAPs) to support */ 2733 __le32 num_vdevs; 2734 2735 /* Number of peer nodes to support */ 2736 __le32 num_peers; 2737 2738 /* Number of active peer nodes to support */ 2739 __le32 num_active_peers; 2740 2741 /* In offload mode, target supports features like WOW, chatter and other 2742 * protocol offloads. In order to support them some functionalities like 2743 * reorder buffering, PN checking need to be done in target. 2744 * This determines maximum number of peers supported by target in 2745 * offload mode. 2746 */ 2747 __le32 num_offload_peers; 2748 2749 /* Number of reorder buffers available for doing target based reorder 2750 * Rx reorder buffering 2751 */ 2752 __le32 num_offload_reorder_buffs; 2753 2754 /* Number of keys per peer */ 2755 __le32 num_peer_keys; 2756 2757 /* Total number of TX/RX data TIDs */ 2758 __le32 num_tids; 2759 2760 /* Max skid for resolving hash collisions. 2761 * The address search table is sparse, so that if two MAC addresses 2762 * result in the same hash value, the second of these conflicting 2763 * entries can slide to the next index in the address search table, 2764 * and use it, if it is unoccupied. This ast_skid_limit parameter 2765 * specifies the upper bound on how many subsequent indices to search 2766 * over to find an unoccupied space. 2767 */ 2768 __le32 ast_skid_limit; 2769 2770 /* The nominal chain mask for transmit. 2771 * The chain mask may be modified dynamically, e.g. to operate AP tx 2772 * with a reduced number of chains if no clients are associated. 2773 * This configuration parameter specifies the nominal chain-mask that 2774 * should be used when not operating with a reduced set of tx chains. 2775 */ 2776 __le32 tx_chain_mask; 2777 2778 /* The nominal chain mask for receive. 2779 * The chain mask may be modified dynamically, e.g. for a client to use 2780 * a reduced number of chains for receive if the traffic to the client 2781 * is low enough that it doesn't require downlink MIMO or antenna 2782 * diversity. This configuration parameter specifies the nominal 2783 * chain-mask that should be used when not operating with a reduced 2784 * set of rx chains. 2785 */ 2786 __le32 rx_chain_mask; 2787 2788 /* What rx reorder timeout (ms) to use for the AC. 2789 * Each WMM access class (voice, video, best-effort, background) will 2790 * have its own timeout value to dictate how long to wait for missing 2791 * rx MPDUs to arrive before flushing subsequent MPDUs that have already 2792 * been received. This parameter specifies the timeout in milliseconds 2793 * for each class. 2794 */ 2795 __le32 rx_timeout_pri[4]; 2796 2797 /* What mode the rx should decap packets to. 2798 * MAC can decap to RAW (no decap), native wifi or Ethernet types. 2799 * This setting also determines the default TX behavior, however TX 2800 * behavior can be modified on a per VAP basis during VAP init 2801 */ 2802 __le32 rx_decap_mode; 2803 2804 __le32 scan_max_pending_req; 2805 2806 __le32 bmiss_offload_max_vdev; 2807 2808 __le32 roam_offload_max_vdev; 2809 2810 __le32 roam_offload_max_ap_profiles; 2811 2812 /* How many groups to use for mcast->ucast conversion. 2813 * The target's WAL maintains a table to hold information regarding 2814 * which peers belong to a given multicast group, so that if 2815 * multicast->unicast conversion is enabled, the target can convert 2816 * multicast tx frames to a series of unicast tx frames, to each peer 2817 * within the multicast group. This num_mcast_groups configuration 2818 * parameter tells the target how many multicast groups to provide 2819 * storage for within its multicast group membership table. 2820 */ 2821 __le32 num_mcast_groups; 2822 2823 /* Size to alloc for the mcast membership table. 2824 * This num_mcast_table_elems configuration parameter tells the target 2825 * how many peer elements it needs to provide storage for in its 2826 * multicast group membership table. These multicast group membership 2827 * table elements are shared by the multicast groups stored within 2828 * the table. 2829 */ 2830 __le32 num_mcast_table_elems; 2831 2832 /* Whether/how to do multicast->unicast conversion. 2833 * This configuration parameter specifies whether the target should 2834 * perform multicast --> unicast conversion on transmit, and if so, 2835 * what to do if it finds no entries in its multicast group membership 2836 * table for the multicast IP address in the tx frame. 2837 * Configuration value: 2838 * 0 -> Do not perform multicast to unicast conversion. 2839 * 1 -> Convert multicast frames to unicast, if the IP multicast address 2840 * from the tx frame is found in the multicast group membership 2841 * table. If the IP multicast address is not found, drop the frame 2842 * 2 -> Convert multicast frames to unicast, if the IP multicast address 2843 * from the tx frame is found in the multicast group membership 2844 * table. If the IP multicast address is not found, transmit the 2845 * frame as multicast. 2846 */ 2847 __le32 mcast2ucast_mode; 2848 2849 /* How much memory to allocate for a tx PPDU dbg log. 2850 * This parameter controls how much memory the target will allocate to 2851 * store a log of tx PPDU meta-information (how large the PPDU was, 2852 * when it was sent, whether it was successful, etc.) 2853 */ 2854 __le32 tx_dbg_log_size; 2855 2856 /* How many AST entries to be allocated for WDS */ 2857 __le32 num_wds_entries; 2858 2859 /* MAC DMA burst size. 0 -default, 1 -256B */ 2860 __le32 dma_burst_size; 2861 2862 /* Fixed delimiters to be inserted after every MPDU to account for 2863 * interface latency to avoid underrun. 2864 */ 2865 __le32 mac_aggr_delim; 2866 2867 /* Determine whether target is responsible for detecting duplicate 2868 * non-aggregate MPDU and timing out stale fragments. A-MPDU reordering 2869 * is always performed on the target. 2870 * 2871 * 0: target responsible for frag timeout and dup checking 2872 * 1: host responsible for frag timeout and dup checking 2873 */ 2874 __le32 rx_skip_defrag_timeout_dup_detection_check; 2875 2876 /* Configuration for VoW : No of Video nodes to be supported and max 2877 * no of descriptors for each video link (node). 2878 */ 2879 __le32 vow_config; 2880 2881 /* Maximum vdev that could use gtk offload */ 2882 __le32 gtk_offload_max_vdev; 2883 2884 /* Number of msdu descriptors target should use */ 2885 __le32 num_msdu_desc; 2886 2887 /* Max number of tx fragments per MSDU. 2888 * This parameter controls the max number of tx fragments per MSDU. 2889 * This will passed by target as part of the WMI_SERVICE_READY event 2890 * and is overridden by the OS shim as required. 2891 */ 2892 __le32 max_frag_entries; 2893 2894 /* Max number of extended peer stats. 2895 * This parameter controls the max number of peers for which extended 2896 * statistics are supported by target 2897 */ 2898 __le32 max_peer_ext_stats; 2899 2900 /* Smart antenna capabilities information. 2901 * 1 - Smart antenna is enabled 2902 * 0 - Smart antenna is disabled 2903 * In future this can contain smart antenna specific capabilities. 2904 */ 2905 __le32 smart_ant_cap; 2906 2907 /* User can configure the buffers allocated for each AC (BE, BK, VI, VO) 2908 * during init. 2909 */ 2910 __le32 bk_minfree; 2911 __le32 be_minfree; 2912 __le32 vi_minfree; 2913 __le32 vo_minfree; 2914 2915 /* Rx batch mode capability. 2916 * 1 - Rx batch mode enabled 2917 * 0 - Rx batch mode disabled 2918 */ 2919 __le32 rx_batchmode; 2920 2921 /* Thermal throttling capability. 2922 * 1 - Capable of thermal throttling 2923 * 0 - Not capable of thermal throttling 2924 */ 2925 __le32 tt_support; 2926 2927 /* ATF configuration. 2928 * 1 - Enable ATF 2929 * 0 - Disable ATF 2930 */ 2931 __le32 atf_config; 2932 2933 /* Configure padding to manage IP header un-alignment 2934 * 1 - Enable padding 2935 * 0 - Disable padding 2936 */ 2937 __le32 iphdr_pad_config; 2938 2939 /* qwrap configuration (bits 15-0) 2940 * 1 - This is qwrap configuration 2941 * 0 - This is not qwrap 2942 * 2943 * Bits 31-16 is alloc_frag_desc_for_data_pkt (1 enables, 0 disables) 2944 * In order to get ack-RSSI reporting and to specify the tx-rate for 2945 * individual frames, this option must be enabled. This uses an extra 2946 * 4 bytes per tx-msdu descriptor, so don't enable it unless you need it. 2947 */ 2948 __le32 qwrap_config; 2949 } __packed; 2950 2951 enum wmi_coex_version { 2952 WMI_NO_COEX_VERSION_SUPPORT = 0, 2953 /* 3 wire coex support*/ 2954 WMI_COEX_VERSION_1 = 1, 2955 /* 2.5 wire coex support*/ 2956 WMI_COEX_VERSION_2 = 2, 2957 /* 2.5 wire coex with duty cycle support */ 2958 WMI_COEX_VERSION_3 = 3, 2959 /* 4 wire coex support*/ 2960 WMI_COEX_VERSION_4 = 4, 2961 }; 2962 2963 /** 2964 * enum wmi_10_4_feature_mask - WMI 10.4 feature enable/disable flags 2965 * @WMI_10_4_LTEU_SUPPORT: LTEU config 2966 * @WMI_10_4_COEX_GPIO_SUPPORT: COEX GPIO config 2967 * @WMI_10_4_AUX_RADIO_SPECTRAL_INTF: AUX Radio Enhancement for spectral scan 2968 * @WMI_10_4_AUX_RADIO_CHAN_LOAD_INTF: AUX Radio Enhancement for chan load scan 2969 * @WMI_10_4_BSS_CHANNEL_INFO_64: BSS channel info stats 2970 * @WMI_10_4_PEER_STATS: Per station stats 2971 * @WMI_10_4_VDEV_STATS: Per vdev stats 2972 * @WMI_10_4_TDLS: Implicit TDLS support in firmware enable/disable 2973 * @WMI_10_4_TDLS_OFFCHAN: TDLS offchannel support enable/disable 2974 * @WMI_10_4_TDLS_UAPSD_BUFFER_STA: TDLS buffer sta support enable/disable 2975 * @WMI_10_4_TDLS_UAPSD_SLEEP_STA: TDLS sleep sta support enable/disable 2976 * @WMI_10_4_TDLS_CONN_TRACKER_IN_HOST_MODE: TDLS connection tracker in host 2977 * enable/disable 2978 * @WMI_10_4_TDLS_EXPLICIT_MODE_ONLY:Explicit TDLS mode enable/disable 2979 * @WMI_10_4_TX_DATA_ACK_RSSI: Enable DATA ACK RSSI if firmware is capable 2980 */ 2981 enum wmi_10_4_feature_mask { 2982 WMI_10_4_LTEU_SUPPORT = BIT(0), 2983 WMI_10_4_COEX_GPIO_SUPPORT = BIT(1), 2984 WMI_10_4_AUX_RADIO_SPECTRAL_INTF = BIT(2), 2985 WMI_10_4_AUX_RADIO_CHAN_LOAD_INTF = BIT(3), 2986 WMI_10_4_BSS_CHANNEL_INFO_64 = BIT(4), 2987 WMI_10_4_PEER_STATS = BIT(5), 2988 WMI_10_4_VDEV_STATS = BIT(6), 2989 WMI_10_4_TDLS = BIT(7), 2990 WMI_10_4_TDLS_OFFCHAN = BIT(8), 2991 WMI_10_4_TDLS_UAPSD_BUFFER_STA = BIT(9), 2992 WMI_10_4_TDLS_UAPSD_SLEEP_STA = BIT(10), 2993 WMI_10_4_TDLS_CONN_TRACKER_IN_HOST_MODE = BIT(11), 2994 WMI_10_4_TDLS_EXPLICIT_MODE_ONLY = BIT(12), 2995 WMI_10_4_TX_DATA_ACK_RSSI = BIT(16), 2996 WMI_10_4_EXT_PEER_TID_CONFIGS_SUPPORT = BIT(17), 2997 WMI_10_4_REPORT_AIRTIME = BIT(18), 2998 2999 }; 3000 3001 struct wmi_ext_resource_config_10_4_cmd { 3002 /* contains enum wmi_host_platform_type */ 3003 __le32 host_platform_config; 3004 /* see enum wmi_10_4_feature_mask */ 3005 __le32 fw_feature_bitmap; 3006 /* WLAN priority GPIO number */ 3007 __le32 wlan_gpio_priority; 3008 /* see enum wmi_coex_version */ 3009 __le32 coex_version; 3010 /* COEX GPIO config */ 3011 __le32 coex_gpio_pin1; 3012 __le32 coex_gpio_pin2; 3013 __le32 coex_gpio_pin3; 3014 /* number of vdevs allowed to perform tdls */ 3015 __le32 num_tdls_vdevs; 3016 /* number of peers to track per TDLS vdev */ 3017 __le32 num_tdls_conn_table_entries; 3018 /* number of tdls sleep sta supported */ 3019 __le32 max_tdls_concurrent_sleep_sta; 3020 /* number of tdls buffer sta supported */ 3021 __le32 max_tdls_concurrent_buffer_sta; 3022 }; 3023 3024 /* structure describing host memory chunk. */ 3025 struct host_memory_chunk { 3026 /* id of the request that is passed up in service ready */ 3027 __le32 req_id; 3028 /* the physical address the memory chunk */ 3029 __le32 ptr; 3030 /* size of the chunk */ 3031 __le32 size; 3032 } __packed; 3033 3034 struct wmi_host_mem_chunks { 3035 __le32 count; 3036 /* some fw revisions require at least 1 chunk regardless of count */ 3037 struct host_memory_chunk items[1]; 3038 } __packed; 3039 3040 struct wmi_init_cmd { 3041 struct wmi_resource_config resource_config; 3042 struct wmi_host_mem_chunks mem_chunks; 3043 } __packed; 3044 3045 /* _10x structure is from 10.X FW API */ 3046 struct wmi_init_cmd_10x { 3047 struct wmi_resource_config_10x resource_config; 3048 struct wmi_host_mem_chunks mem_chunks; 3049 } __packed; 3050 3051 struct wmi_init_cmd_10_2 { 3052 struct wmi_resource_config_10_2 resource_config; 3053 struct wmi_host_mem_chunks mem_chunks; 3054 } __packed; 3055 3056 struct wmi_init_cmd_10_4 { 3057 struct wmi_resource_config_10_4 resource_config; 3058 struct wmi_host_mem_chunks mem_chunks; 3059 } __packed; 3060 3061 struct wmi_chan_list_entry { 3062 __le16 freq; 3063 u8 phy_mode; /* valid for 10.2 only */ 3064 u8 reserved; 3065 } __packed; 3066 3067 /* TLV for channel list */ 3068 struct wmi_chan_list { 3069 __le32 tag; /* WMI_CHAN_LIST_TAG */ 3070 __le32 num_chan; 3071 struct wmi_chan_list_entry channel_list[0]; 3072 } __packed; 3073 3074 struct wmi_bssid_list { 3075 __le32 tag; /* WMI_BSSID_LIST_TAG */ 3076 __le32 num_bssid; 3077 struct wmi_mac_addr bssid_list[0]; 3078 } __packed; 3079 3080 struct wmi_ie_data { 3081 __le32 tag; /* WMI_IE_TAG */ 3082 __le32 ie_len; 3083 u8 ie_data[0]; 3084 } __packed; 3085 3086 struct wmi_ssid { 3087 __le32 ssid_len; 3088 u8 ssid[32]; 3089 } __packed; 3090 3091 struct wmi_ssid_list { 3092 __le32 tag; /* WMI_SSID_LIST_TAG */ 3093 __le32 num_ssids; 3094 struct wmi_ssid ssids[0]; 3095 } __packed; 3096 3097 /* prefix used by scan requestor ids on the host */ 3098 #define WMI_HOST_SCAN_REQUESTOR_ID_PREFIX 0xA000 3099 3100 /* prefix used by scan request ids generated on the host */ 3101 /* host cycles through the lower 12 bits to generate ids */ 3102 #define WMI_HOST_SCAN_REQ_ID_PREFIX 0xA000 3103 3104 #define WLAN_SCAN_PARAMS_MAX_SSID 16 3105 #define WLAN_SCAN_PARAMS_MAX_BSSID 4 3106 #define WLAN_SCAN_PARAMS_MAX_IE_LEN 256 3107 3108 /* Values lower than this may be refused by some firmware revisions with a scan 3109 * completion with a timedout reason. 3110 */ 3111 #define WMI_SCAN_CHAN_MIN_TIME_MSEC 40 3112 3113 /* Scan priority numbers must be sequential, starting with 0 */ 3114 enum wmi_scan_priority { 3115 WMI_SCAN_PRIORITY_VERY_LOW = 0, 3116 WMI_SCAN_PRIORITY_LOW, 3117 WMI_SCAN_PRIORITY_MEDIUM, 3118 WMI_SCAN_PRIORITY_HIGH, 3119 WMI_SCAN_PRIORITY_VERY_HIGH, 3120 WMI_SCAN_PRIORITY_COUNT /* number of priorities supported */ 3121 }; 3122 3123 struct wmi_start_scan_common { 3124 /* Scan ID */ 3125 __le32 scan_id; 3126 /* Scan requestor ID */ 3127 __le32 scan_req_id; 3128 /* VDEV id(interface) that is requesting scan */ 3129 __le32 vdev_id; 3130 /* Scan Priority, input to scan scheduler */ 3131 __le32 scan_priority; 3132 /* Scan events subscription */ 3133 __le32 notify_scan_events; 3134 /* dwell time in msec on active channels */ 3135 __le32 dwell_time_active; 3136 /* dwell time in msec on passive channels */ 3137 __le32 dwell_time_passive; 3138 /* 3139 * min time in msec on the BSS channel,only valid if atleast one 3140 * VDEV is active 3141 */ 3142 __le32 min_rest_time; 3143 /* 3144 * max rest time in msec on the BSS channel,only valid if at least 3145 * one VDEV is active 3146 */ 3147 /* 3148 * the scanner will rest on the bss channel at least min_rest_time 3149 * after min_rest_time the scanner will start checking for tx/rx 3150 * activity on all VDEVs. if there is no activity the scanner will 3151 * switch to off channel. if there is activity the scanner will let 3152 * the radio on the bss channel until max_rest_time expires.at 3153 * max_rest_time scanner will switch to off channel irrespective of 3154 * activity. activity is determined by the idle_time parameter. 3155 */ 3156 __le32 max_rest_time; 3157 /* 3158 * time before sending next set of probe requests. 3159 * The scanner keeps repeating probe requests transmission with 3160 * period specified by repeat_probe_time. 3161 * The number of probe requests specified depends on the ssid_list 3162 * and bssid_list 3163 */ 3164 __le32 repeat_probe_time; 3165 /* time in msec between 2 consequetive probe requests with in a set. */ 3166 __le32 probe_spacing_time; 3167 /* 3168 * data inactivity time in msec on bss channel that will be used by 3169 * scanner for measuring the inactivity. 3170 */ 3171 __le32 idle_time; 3172 /* maximum time in msec allowed for scan */ 3173 __le32 max_scan_time; 3174 /* 3175 * delay in msec before sending first probe request after switching 3176 * to a channel 3177 */ 3178 __le32 probe_delay; 3179 /* Scan control flags */ 3180 __le32 scan_ctrl_flags; 3181 } __packed; 3182 3183 struct wmi_start_scan_tlvs { 3184 /* TLV parameters. These includes channel list, ssid list, bssid list, 3185 * extra ies. 3186 */ 3187 u8 tlvs[0]; 3188 } __packed; 3189 3190 struct wmi_start_scan_cmd { 3191 struct wmi_start_scan_common common; 3192 __le32 burst_duration_ms; 3193 struct wmi_start_scan_tlvs tlvs; 3194 } __packed; 3195 3196 /* This is the definition from 10.X firmware branch */ 3197 struct wmi_10x_start_scan_cmd { 3198 struct wmi_start_scan_common common; 3199 struct wmi_start_scan_tlvs tlvs; 3200 } __packed; 3201 3202 struct wmi_ssid_arg { 3203 int len; 3204 const u8 *ssid; 3205 }; 3206 3207 struct wmi_bssid_arg { 3208 const u8 *bssid; 3209 }; 3210 3211 struct wmi_start_scan_arg { 3212 u32 scan_id; 3213 u32 scan_req_id; 3214 u32 vdev_id; 3215 u32 scan_priority; 3216 u32 notify_scan_events; 3217 u32 dwell_time_active; 3218 u32 dwell_time_passive; 3219 u32 min_rest_time; 3220 u32 max_rest_time; 3221 u32 repeat_probe_time; 3222 u32 probe_spacing_time; 3223 u32 idle_time; 3224 u32 max_scan_time; 3225 u32 probe_delay; 3226 u32 scan_ctrl_flags; 3227 u32 burst_duration_ms; 3228 3229 u32 ie_len; 3230 u32 n_channels; 3231 u32 n_ssids; 3232 u32 n_bssids; 3233 3234 u8 ie[WLAN_SCAN_PARAMS_MAX_IE_LEN]; 3235 u16 channels[64]; 3236 struct wmi_ssid_arg ssids[WLAN_SCAN_PARAMS_MAX_SSID]; 3237 struct wmi_bssid_arg bssids[WLAN_SCAN_PARAMS_MAX_BSSID]; 3238 struct wmi_mac_addr mac_addr; 3239 struct wmi_mac_addr mac_mask; 3240 }; 3241 3242 /* scan control flags */ 3243 3244 /* passively scan all channels including active channels */ 3245 #define WMI_SCAN_FLAG_PASSIVE 0x1 3246 /* add wild card ssid probe request even though ssid_list is specified. */ 3247 #define WMI_SCAN_ADD_BCAST_PROBE_REQ 0x2 3248 /* add cck rates to rates/xrate ie for the generated probe request */ 3249 #define WMI_SCAN_ADD_CCK_RATES 0x4 3250 /* add ofdm rates to rates/xrate ie for the generated probe request */ 3251 #define WMI_SCAN_ADD_OFDM_RATES 0x8 3252 /* To enable indication of Chan load and Noise floor to host */ 3253 #define WMI_SCAN_CHAN_STAT_EVENT 0x10 3254 /* Filter Probe request frames */ 3255 #define WMI_SCAN_FILTER_PROBE_REQ 0x20 3256 /* When set, DFS channels will not be scanned */ 3257 #define WMI_SCAN_BYPASS_DFS_CHN 0x40 3258 /* Different FW scan engine may choose to bail out on errors. 3259 * Allow the driver to have influence over that. 3260 */ 3261 #define WMI_SCAN_CONTINUE_ON_ERROR 0x80 3262 3263 /* Use random MAC address for TA for Probe Request frame and add 3264 * OUI specified by WMI_SCAN_PROB_REQ_OUI_CMDID to the Probe Request frame. 3265 * if OUI is not set by WMI_SCAN_PROB_REQ_OUI_CMDID then the flag is ignored. 3266 */ 3267 #define WMI_SCAN_ADD_SPOOFED_MAC_IN_PROBE_REQ 0x1000 3268 3269 /* WMI_SCAN_CLASS_MASK must be the same value as IEEE80211_SCAN_CLASS_MASK */ 3270 #define WMI_SCAN_CLASS_MASK 0xFF000000 3271 3272 enum wmi_stop_scan_type { 3273 WMI_SCAN_STOP_ONE = 0x00000000, /* stop by scan_id */ 3274 WMI_SCAN_STOP_VDEV_ALL = 0x01000000, /* stop by vdev_id */ 3275 WMI_SCAN_STOP_ALL = 0x04000000, /* stop all scans */ 3276 }; 3277 3278 struct wmi_stop_scan_cmd { 3279 __le32 scan_req_id; 3280 __le32 scan_id; 3281 __le32 req_type; 3282 __le32 vdev_id; 3283 } __packed; 3284 3285 struct wmi_stop_scan_arg { 3286 u32 req_id; 3287 enum wmi_stop_scan_type req_type; 3288 union { 3289 u32 scan_id; 3290 u32 vdev_id; 3291 } u; 3292 }; 3293 3294 struct wmi_scan_chan_list_cmd { 3295 __le32 num_scan_chans; 3296 struct wmi_channel chan_info[0]; 3297 } __packed; 3298 3299 struct wmi_scan_chan_list_arg { 3300 u32 n_channels; 3301 struct wmi_channel_arg *channels; 3302 }; 3303 3304 enum wmi_bss_filter { 3305 WMI_BSS_FILTER_NONE = 0, /* no beacons forwarded */ 3306 WMI_BSS_FILTER_ALL, /* all beacons forwarded */ 3307 WMI_BSS_FILTER_PROFILE, /* only beacons matching profile */ 3308 WMI_BSS_FILTER_ALL_BUT_PROFILE, /* all but beacons matching profile */ 3309 WMI_BSS_FILTER_CURRENT_BSS, /* only beacons matching current BSS */ 3310 WMI_BSS_FILTER_ALL_BUT_BSS, /* all but beacons matching BSS */ 3311 WMI_BSS_FILTER_PROBED_SSID, /* beacons matching probed ssid */ 3312 WMI_BSS_FILTER_LAST_BSS, /* marker only */ 3313 }; 3314 3315 enum wmi_scan_event_type { 3316 WMI_SCAN_EVENT_STARTED = BIT(0), 3317 WMI_SCAN_EVENT_COMPLETED = BIT(1), 3318 WMI_SCAN_EVENT_BSS_CHANNEL = BIT(2), 3319 WMI_SCAN_EVENT_FOREIGN_CHANNEL = BIT(3), 3320 WMI_SCAN_EVENT_DEQUEUED = BIT(4), 3321 /* possibly by high-prio scan */ 3322 WMI_SCAN_EVENT_PREEMPTED = BIT(5), 3323 WMI_SCAN_EVENT_START_FAILED = BIT(6), 3324 WMI_SCAN_EVENT_RESTARTED = BIT(7), 3325 WMI_SCAN_EVENT_FOREIGN_CHANNEL_EXIT = BIT(8), 3326 WMI_SCAN_EVENT_MAX = BIT(15), 3327 }; 3328 3329 enum wmi_scan_completion_reason { 3330 WMI_SCAN_REASON_COMPLETED, 3331 WMI_SCAN_REASON_CANCELLED, 3332 WMI_SCAN_REASON_PREEMPTED, 3333 WMI_SCAN_REASON_TIMEDOUT, 3334 WMI_SCAN_REASON_INTERNAL_FAILURE, 3335 WMI_SCAN_REASON_MAX, 3336 }; 3337 3338 struct wmi_scan_event { 3339 __le32 event_type; /* %WMI_SCAN_EVENT_ */ 3340 __le32 reason; /* %WMI_SCAN_REASON_ */ 3341 __le32 channel_freq; /* only valid for WMI_SCAN_EVENT_FOREIGN_CHANNEL */ 3342 __le32 scan_req_id; 3343 __le32 scan_id; 3344 __le32 vdev_id; 3345 } __packed; 3346 3347 /* 3348 * This defines how much headroom is kept in the 3349 * receive frame between the descriptor and the 3350 * payload, in order for the WMI PHY error and 3351 * management handler to insert header contents. 3352 * 3353 * This is in bytes. 3354 */ 3355 #define WMI_MGMT_RX_HDR_HEADROOM 52 3356 3357 /* 3358 * This event will be used for sending scan results 3359 * as well as rx mgmt frames to the host. The rx buffer 3360 * will be sent as part of this WMI event. It would be a 3361 * good idea to pass all the fields in the RX status 3362 * descriptor up to the host. 3363 */ 3364 struct wmi_mgmt_rx_hdr_v1 { 3365 __le32 channel; 3366 __le32 snr; 3367 __le32 rate; 3368 __le32 phy_mode; 3369 __le32 buf_len; 3370 __le32 status; /* %WMI_RX_STATUS_ */ 3371 } __packed; 3372 3373 struct wmi_mgmt_rx_hdr_v2 { 3374 struct wmi_mgmt_rx_hdr_v1 v1; 3375 __le32 rssi_ctl[4]; 3376 } __packed; 3377 3378 struct wmi_mgmt_rx_event_v1 { 3379 struct wmi_mgmt_rx_hdr_v1 hdr; 3380 u8 buf[0]; 3381 } __packed; 3382 3383 struct wmi_mgmt_rx_event_v2 { 3384 struct wmi_mgmt_rx_hdr_v2 hdr; 3385 u8 buf[0]; 3386 } __packed; 3387 3388 struct wmi_10_4_mgmt_rx_hdr { 3389 __le32 channel; 3390 __le32 snr; 3391 u8 rssi_ctl[4]; 3392 __le32 rate; 3393 __le32 phy_mode; 3394 __le32 buf_len; 3395 __le32 status; 3396 } __packed; 3397 3398 struct wmi_10_4_mgmt_rx_event { 3399 struct wmi_10_4_mgmt_rx_hdr hdr; 3400 u8 buf[0]; 3401 } __packed; 3402 3403 struct wmi_mgmt_rx_ext_info { 3404 __le64 rx_mac_timestamp; 3405 } __packed __aligned(4); 3406 3407 #define WMI_RX_STATUS_OK 0x00 3408 #define WMI_RX_STATUS_ERR_CRC 0x01 3409 #define WMI_RX_STATUS_ERR_DECRYPT 0x08 3410 #define WMI_RX_STATUS_ERR_MIC 0x10 3411 #define WMI_RX_STATUS_ERR_KEY_CACHE_MISS 0x20 3412 /* Extension data at the end of mgmt frame */ 3413 #define WMI_RX_STATUS_EXT_INFO 0x40 3414 3415 #define PHY_ERROR_GEN_SPECTRAL_SCAN 0x26 3416 #define PHY_ERROR_GEN_FALSE_RADAR_EXT 0x24 3417 #define PHY_ERROR_GEN_RADAR 0x05 3418 3419 #define PHY_ERROR_10_4_RADAR_MASK 0x4 3420 #define PHY_ERROR_10_4_SPECTRAL_SCAN_MASK 0x4000000 3421 3422 enum phy_err_type { 3423 PHY_ERROR_UNKNOWN, 3424 PHY_ERROR_SPECTRAL_SCAN, 3425 PHY_ERROR_FALSE_RADAR_EXT, 3426 PHY_ERROR_RADAR 3427 }; 3428 3429 struct wmi_phyerr { 3430 __le32 tsf_timestamp; 3431 __le16 freq1; 3432 __le16 freq2; 3433 u8 rssi_combined; 3434 u8 chan_width_mhz; 3435 u8 phy_err_code; 3436 u8 rsvd0; 3437 __le32 rssi_chains[4]; 3438 __le16 nf_chains[4]; 3439 __le32 buf_len; 3440 u8 buf[0]; 3441 } __packed; 3442 3443 struct wmi_phyerr_event { 3444 __le32 num_phyerrs; 3445 __le32 tsf_l32; 3446 __le32 tsf_u32; 3447 struct wmi_phyerr phyerrs[0]; 3448 } __packed; 3449 3450 struct wmi_10_4_phyerr_event { 3451 __le32 tsf_l32; 3452 __le32 tsf_u32; 3453 __le16 freq1; 3454 __le16 freq2; 3455 u8 rssi_combined; 3456 u8 chan_width_mhz; 3457 u8 phy_err_code; 3458 u8 rsvd0; 3459 __le32 rssi_chains[4]; 3460 __le16 nf_chains[4]; 3461 __le32 phy_err_mask[2]; 3462 __le32 tsf_timestamp; 3463 __le32 buf_len; 3464 u8 buf[0]; 3465 } __packed; 3466 3467 struct wmi_radar_found_info { 3468 __le32 pri_min; 3469 __le32 pri_max; 3470 __le32 width_min; 3471 __le32 width_max; 3472 __le32 sidx_min; 3473 __le32 sidx_max; 3474 } __packed; 3475 3476 enum wmi_radar_confirmation_status { 3477 /* Detected radar was due to SW pulses */ 3478 WMI_SW_RADAR_DETECTED = 0, 3479 3480 WMI_RADAR_DETECTION_FAIL = 1, 3481 3482 /* Real radar detected */ 3483 WMI_HW_RADAR_DETECTED = 2, 3484 }; 3485 3486 #define PHYERR_TLV_SIG 0xBB 3487 #define PHYERR_TLV_TAG_SEARCH_FFT_REPORT 0xFB 3488 #define PHYERR_TLV_TAG_RADAR_PULSE_SUMMARY 0xF8 3489 #define PHYERR_TLV_TAG_SPECTRAL_SUMMARY_REPORT 0xF9 3490 3491 struct phyerr_radar_report { 3492 __le32 reg0; /* RADAR_REPORT_REG0_* */ 3493 __le32 reg1; /* RADAR_REPORT_REG1_* */ 3494 } __packed; 3495 3496 #define RADAR_REPORT_REG0_PULSE_IS_CHIRP_MASK 0x80000000 3497 #define RADAR_REPORT_REG0_PULSE_IS_CHIRP_LSB 31 3498 3499 #define RADAR_REPORT_REG0_PULSE_IS_MAX_WIDTH_MASK 0x40000000 3500 #define RADAR_REPORT_REG0_PULSE_IS_MAX_WIDTH_LSB 30 3501 3502 #define RADAR_REPORT_REG0_AGC_TOTAL_GAIN_MASK 0x3FF00000 3503 #define RADAR_REPORT_REG0_AGC_TOTAL_GAIN_LSB 20 3504 3505 #define RADAR_REPORT_REG0_PULSE_DELTA_DIFF_MASK 0x000F0000 3506 #define RADAR_REPORT_REG0_PULSE_DELTA_DIFF_LSB 16 3507 3508 #define RADAR_REPORT_REG0_PULSE_DELTA_PEAK_MASK 0x0000FC00 3509 #define RADAR_REPORT_REG0_PULSE_DELTA_PEAK_LSB 10 3510 3511 #define RADAR_REPORT_REG0_PULSE_SIDX_MASK 0x000003FF 3512 #define RADAR_REPORT_REG0_PULSE_SIDX_LSB 0 3513 3514 #define RADAR_REPORT_REG1_PULSE_SRCH_FFT_VALID_MASK 0x80000000 3515 #define RADAR_REPORT_REG1_PULSE_SRCH_FFT_VALID_LSB 31 3516 3517 #define RADAR_REPORT_REG1_PULSE_AGC_MB_GAIN_MASK 0x7F000000 3518 #define RADAR_REPORT_REG1_PULSE_AGC_MB_GAIN_LSB 24 3519 3520 #define RADAR_REPORT_REG1_PULSE_SUBCHAN_MASK_MASK 0x00FF0000 3521 #define RADAR_REPORT_REG1_PULSE_SUBCHAN_MASK_LSB 16 3522 3523 #define RADAR_REPORT_REG1_PULSE_TSF_OFFSET_MASK 0x0000FF00 3524 #define RADAR_REPORT_REG1_PULSE_TSF_OFFSET_LSB 8 3525 3526 #define RADAR_REPORT_REG1_PULSE_DUR_MASK 0x000000FF 3527 #define RADAR_REPORT_REG1_PULSE_DUR_LSB 0 3528 3529 struct phyerr_fft_report { 3530 __le32 reg0; /* SEARCH_FFT_REPORT_REG0_ * */ 3531 __le32 reg1; /* SEARCH_FFT_REPORT_REG1_ * */ 3532 } __packed; 3533 3534 #define SEARCH_FFT_REPORT_REG0_TOTAL_GAIN_DB_MASK 0xFF800000 3535 #define SEARCH_FFT_REPORT_REG0_TOTAL_GAIN_DB_LSB 23 3536 3537 #define SEARCH_FFT_REPORT_REG0_BASE_PWR_DB_MASK 0x007FC000 3538 #define SEARCH_FFT_REPORT_REG0_BASE_PWR_DB_LSB 14 3539 3540 #define SEARCH_FFT_REPORT_REG0_FFT_CHN_IDX_MASK 0x00003000 3541 #define SEARCH_FFT_REPORT_REG0_FFT_CHN_IDX_LSB 12 3542 3543 #define SEARCH_FFT_REPORT_REG0_PEAK_SIDX_MASK 0x00000FFF 3544 #define SEARCH_FFT_REPORT_REG0_PEAK_SIDX_LSB 0 3545 3546 #define SEARCH_FFT_REPORT_REG1_RELPWR_DB_MASK 0xFC000000 3547 #define SEARCH_FFT_REPORT_REG1_RELPWR_DB_LSB 26 3548 3549 #define SEARCH_FFT_REPORT_REG1_AVGPWR_DB_MASK 0x03FC0000 3550 #define SEARCH_FFT_REPORT_REG1_AVGPWR_DB_LSB 18 3551 3552 #define SEARCH_FFT_REPORT_REG1_PEAK_MAG_MASK 0x0003FF00 3553 #define SEARCH_FFT_REPORT_REG1_PEAK_MAG_LSB 8 3554 3555 #define SEARCH_FFT_REPORT_REG1_NUM_STR_BINS_IB_MASK 0x000000FF 3556 #define SEARCH_FFT_REPORT_REG1_NUM_STR_BINS_IB_LSB 0 3557 3558 struct phyerr_tlv { 3559 __le16 len; 3560 u8 tag; 3561 u8 sig; 3562 } __packed; 3563 3564 #define DFS_RSSI_POSSIBLY_FALSE 50 3565 #define DFS_PEAK_MAG_THOLD_POSSIBLY_FALSE 40 3566 3567 struct wmi_mgmt_tx_hdr { 3568 __le32 vdev_id; 3569 struct wmi_mac_addr peer_macaddr; 3570 __le32 tx_rate; 3571 __le32 tx_power; 3572 __le32 buf_len; 3573 } __packed; 3574 3575 struct wmi_mgmt_tx_cmd { 3576 struct wmi_mgmt_tx_hdr hdr; 3577 u8 buf[0]; 3578 } __packed; 3579 3580 struct wmi_echo_event { 3581 __le32 value; 3582 } __packed; 3583 3584 struct wmi_echo_cmd { 3585 __le32 value; 3586 } __packed; 3587 3588 struct wmi_pdev_set_regdomain_cmd { 3589 __le32 reg_domain; 3590 __le32 reg_domain_2G; 3591 __le32 reg_domain_5G; 3592 __le32 conformance_test_limit_2G; 3593 __le32 conformance_test_limit_5G; 3594 } __packed; 3595 3596 enum wmi_dfs_region { 3597 /* Uninitialized dfs domain */ 3598 WMI_UNINIT_DFS_DOMAIN = 0, 3599 3600 /* FCC3 dfs domain */ 3601 WMI_FCC_DFS_DOMAIN = 1, 3602 3603 /* ETSI dfs domain */ 3604 WMI_ETSI_DFS_DOMAIN = 2, 3605 3606 /*Japan dfs domain */ 3607 WMI_MKK4_DFS_DOMAIN = 3, 3608 }; 3609 3610 struct wmi_pdev_set_regdomain_cmd_10x { 3611 __le32 reg_domain; 3612 __le32 reg_domain_2G; 3613 __le32 reg_domain_5G; 3614 __le32 conformance_test_limit_2G; 3615 __le32 conformance_test_limit_5G; 3616 3617 /* dfs domain from wmi_dfs_region */ 3618 __le32 dfs_domain; 3619 } __packed; 3620 3621 /* Command to set/unset chip in quiet mode */ 3622 struct wmi_pdev_set_quiet_cmd { 3623 /* period in TUs */ 3624 __le32 period; 3625 3626 /* duration in TUs */ 3627 __le32 duration; 3628 3629 /* offset in TUs */ 3630 __le32 next_start; 3631 3632 /* enable/disable */ 3633 __le32 enabled; 3634 } __packed; 3635 3636 /* 3637 * 802.11g protection mode. 3638 */ 3639 enum ath10k_protmode { 3640 ATH10K_PROT_NONE = 0, /* no protection */ 3641 ATH10K_PROT_CTSONLY = 1, /* CTS to self */ 3642 ATH10K_PROT_RTSCTS = 2, /* RTS-CTS */ 3643 }; 3644 3645 enum wmi_rtscts_profile { 3646 WMI_RTSCTS_FOR_NO_RATESERIES = 0, 3647 WMI_RTSCTS_FOR_SECOND_RATESERIES, 3648 WMI_RTSCTS_ACROSS_SW_RETRIES 3649 }; 3650 3651 #define WMI_RTSCTS_ENABLED 1 3652 #define WMI_RTSCTS_SET_MASK 0x0f 3653 #define WMI_RTSCTS_SET_LSB 0 3654 3655 #define WMI_RTSCTS_PROFILE_MASK 0xf0 3656 #define WMI_RTSCTS_PROFILE_LSB 4 3657 3658 enum wmi_beacon_gen_mode { 3659 WMI_BEACON_STAGGERED_MODE = 0, 3660 WMI_BEACON_BURST_MODE = 1 3661 }; 3662 3663 enum wmi_csa_event_ies_present_flag { 3664 WMI_CSA_IE_PRESENT = 0x00000001, 3665 WMI_XCSA_IE_PRESENT = 0x00000002, 3666 WMI_WBW_IE_PRESENT = 0x00000004, 3667 WMI_CSWARP_IE_PRESENT = 0x00000008, 3668 }; 3669 3670 /* wmi CSA receive event from beacon frame */ 3671 struct wmi_csa_event { 3672 __le32 i_fc_dur; 3673 /* Bit 0-15: FC */ 3674 /* Bit 16-31: DUR */ 3675 struct wmi_mac_addr i_addr1; 3676 struct wmi_mac_addr i_addr2; 3677 __le32 csa_ie[2]; 3678 __le32 xcsa_ie[2]; 3679 __le32 wb_ie[2]; 3680 __le32 cswarp_ie; 3681 __le32 ies_present_flag; /* wmi_csa_event_ies_present_flag */ 3682 } __packed; 3683 3684 /* the definition of different PDEV parameters */ 3685 #define PDEV_DEFAULT_STATS_UPDATE_PERIOD 500 3686 #define VDEV_DEFAULT_STATS_UPDATE_PERIOD 500 3687 #define PEER_DEFAULT_STATS_UPDATE_PERIOD 500 3688 3689 struct wmi_pdev_param_map { 3690 u32 tx_chain_mask; 3691 u32 rx_chain_mask; 3692 u32 txpower_limit2g; 3693 u32 txpower_limit5g; 3694 u32 txpower_scale; 3695 u32 beacon_gen_mode; 3696 u32 beacon_tx_mode; 3697 u32 resmgr_offchan_mode; 3698 u32 protection_mode; 3699 u32 dynamic_bw; 3700 u32 non_agg_sw_retry_th; 3701 u32 agg_sw_retry_th; 3702 u32 sta_kickout_th; 3703 u32 ac_aggrsize_scaling; 3704 u32 ltr_enable; 3705 u32 ltr_ac_latency_be; 3706 u32 ltr_ac_latency_bk; 3707 u32 ltr_ac_latency_vi; 3708 u32 ltr_ac_latency_vo; 3709 u32 ltr_ac_latency_timeout; 3710 u32 ltr_sleep_override; 3711 u32 ltr_rx_override; 3712 u32 ltr_tx_activity_timeout; 3713 u32 l1ss_enable; 3714 u32 dsleep_enable; 3715 u32 pcielp_txbuf_flush; 3716 u32 pcielp_txbuf_watermark; 3717 u32 pcielp_txbuf_tmo_en; 3718 u32 pcielp_txbuf_tmo_value; 3719 u32 pdev_stats_update_period; 3720 u32 vdev_stats_update_period; 3721 u32 peer_stats_update_period; 3722 u32 bcnflt_stats_update_period; 3723 u32 pmf_qos; 3724 u32 arp_ac_override; 3725 u32 dcs; 3726 u32 ani_enable; 3727 u32 ani_poll_period; 3728 u32 ani_listen_period; 3729 u32 ani_ofdm_level; 3730 u32 ani_cck_level; 3731 u32 dyntxchain; 3732 u32 proxy_sta; 3733 u32 idle_ps_config; 3734 u32 power_gating_sleep; 3735 u32 fast_channel_reset; 3736 u32 burst_dur; 3737 u32 burst_enable; 3738 u32 cal_period; 3739 u32 aggr_burst; 3740 u32 rx_decap_mode; 3741 u32 smart_antenna_default_antenna; 3742 u32 igmpmld_override; 3743 u32 igmpmld_tid; 3744 u32 antenna_gain; 3745 u32 rx_filter; 3746 u32 set_mcast_to_ucast_tid; 3747 u32 proxy_sta_mode; 3748 u32 set_mcast2ucast_mode; 3749 u32 set_mcast2ucast_buffer; 3750 u32 remove_mcast2ucast_buffer; 3751 u32 peer_sta_ps_statechg_enable; 3752 u32 igmpmld_ac_override; 3753 u32 block_interbss; 3754 u32 set_disable_reset_cmdid; 3755 u32 set_msdu_ttl_cmdid; 3756 u32 set_ppdu_duration_cmdid; 3757 u32 txbf_sound_period_cmdid; 3758 u32 set_promisc_mode_cmdid; 3759 u32 set_burst_mode_cmdid; 3760 u32 en_stats; 3761 u32 mu_group_policy; 3762 u32 noise_detection; 3763 u32 noise_threshold; 3764 u32 dpd_enable; 3765 u32 set_mcast_bcast_echo; 3766 u32 atf_strict_sch; 3767 u32 atf_sched_duration; 3768 u32 ant_plzn; 3769 u32 mgmt_retry_limit; 3770 u32 sensitivity_level; 3771 u32 signed_txpower_2g; 3772 u32 signed_txpower_5g; 3773 u32 enable_per_tid_amsdu; 3774 u32 enable_per_tid_ampdu; 3775 u32 cca_threshold; 3776 u32 rts_fixed_rate; 3777 u32 pdev_reset; 3778 u32 wapi_mbssid_offset; 3779 u32 arp_srcaddr; 3780 u32 arp_dstaddr; 3781 u32 enable_btcoex; 3782 }; 3783 3784 #define WMI_PDEV_PARAM_UNSUPPORTED 0 3785 3786 enum wmi_pdev_param { 3787 /* TX chain mask */ 3788 WMI_PDEV_PARAM_TX_CHAIN_MASK = 0x1, 3789 /* RX chain mask */ 3790 WMI_PDEV_PARAM_RX_CHAIN_MASK, 3791 /* TX power limit for 2G Radio */ 3792 WMI_PDEV_PARAM_TXPOWER_LIMIT2G, 3793 /* TX power limit for 5G Radio */ 3794 WMI_PDEV_PARAM_TXPOWER_LIMIT5G, 3795 /* TX power scale */ 3796 WMI_PDEV_PARAM_TXPOWER_SCALE, 3797 /* Beacon generation mode . 0: host, 1: target */ 3798 WMI_PDEV_PARAM_BEACON_GEN_MODE, 3799 /* Beacon generation mode . 0: staggered 1: bursted */ 3800 WMI_PDEV_PARAM_BEACON_TX_MODE, 3801 /* 3802 * Resource manager off chan mode . 3803 * 0: turn off off chan mode. 1: turn on offchan mode 3804 */ 3805 WMI_PDEV_PARAM_RESMGR_OFFCHAN_MODE, 3806 /* 3807 * Protection mode: 3808 * 0: no protection 1:use CTS-to-self 2: use RTS/CTS 3809 */ 3810 WMI_PDEV_PARAM_PROTECTION_MODE, 3811 /* 3812 * Dynamic bandwidth - 0: disable, 1: enable 3813 * 3814 * When enabled HW rate control tries different bandwidths when 3815 * retransmitting frames. 3816 */ 3817 WMI_PDEV_PARAM_DYNAMIC_BW, 3818 /* Non aggregrate/ 11g sw retry threshold.0-disable */ 3819 WMI_PDEV_PARAM_NON_AGG_SW_RETRY_TH, 3820 /* aggregrate sw retry threshold. 0-disable*/ 3821 WMI_PDEV_PARAM_AGG_SW_RETRY_TH, 3822 /* Station kickout threshold (non of consecutive failures).0-disable */ 3823 WMI_PDEV_PARAM_STA_KICKOUT_TH, 3824 /* Aggerate size scaling configuration per AC */ 3825 WMI_PDEV_PARAM_AC_AGGRSIZE_SCALING, 3826 /* LTR enable */ 3827 WMI_PDEV_PARAM_LTR_ENABLE, 3828 /* LTR latency for BE, in us */ 3829 WMI_PDEV_PARAM_LTR_AC_LATENCY_BE, 3830 /* LTR latency for BK, in us */ 3831 WMI_PDEV_PARAM_LTR_AC_LATENCY_BK, 3832 /* LTR latency for VI, in us */ 3833 WMI_PDEV_PARAM_LTR_AC_LATENCY_VI, 3834 /* LTR latency for VO, in us */ 3835 WMI_PDEV_PARAM_LTR_AC_LATENCY_VO, 3836 /* LTR AC latency timeout, in ms */ 3837 WMI_PDEV_PARAM_LTR_AC_LATENCY_TIMEOUT, 3838 /* LTR platform latency override, in us */ 3839 WMI_PDEV_PARAM_LTR_SLEEP_OVERRIDE, 3840 /* LTR-RX override, in us */ 3841 WMI_PDEV_PARAM_LTR_RX_OVERRIDE, 3842 /* Tx activity timeout for LTR, in us */ 3843 WMI_PDEV_PARAM_LTR_TX_ACTIVITY_TIMEOUT, 3844 /* L1SS state machine enable */ 3845 WMI_PDEV_PARAM_L1SS_ENABLE, 3846 /* Deep sleep state machine enable */ 3847 WMI_PDEV_PARAM_DSLEEP_ENABLE, 3848 /* RX buffering flush enable */ 3849 WMI_PDEV_PARAM_PCIELP_TXBUF_FLUSH, 3850 /* RX buffering matermark */ 3851 WMI_PDEV_PARAM_PCIELP_TXBUF_WATERMARK, 3852 /* RX buffering timeout enable */ 3853 WMI_PDEV_PARAM_PCIELP_TXBUF_TMO_EN, 3854 /* RX buffering timeout value */ 3855 WMI_PDEV_PARAM_PCIELP_TXBUF_TMO_VALUE, 3856 /* pdev level stats update period in ms */ 3857 WMI_PDEV_PARAM_PDEV_STATS_UPDATE_PERIOD, 3858 /* vdev level stats update period in ms */ 3859 WMI_PDEV_PARAM_VDEV_STATS_UPDATE_PERIOD, 3860 /* peer level stats update period in ms */ 3861 WMI_PDEV_PARAM_PEER_STATS_UPDATE_PERIOD, 3862 /* beacon filter status update period */ 3863 WMI_PDEV_PARAM_BCNFLT_STATS_UPDATE_PERIOD, 3864 /* QOS Mgmt frame protection MFP/PMF 0: disable, 1: enable */ 3865 WMI_PDEV_PARAM_PMF_QOS, 3866 /* Access category on which ARP frames are sent */ 3867 WMI_PDEV_PARAM_ARP_AC_OVERRIDE, 3868 /* DCS configuration */ 3869 WMI_PDEV_PARAM_DCS, 3870 /* Enable/Disable ANI on target */ 3871 WMI_PDEV_PARAM_ANI_ENABLE, 3872 /* configure the ANI polling period */ 3873 WMI_PDEV_PARAM_ANI_POLL_PERIOD, 3874 /* configure the ANI listening period */ 3875 WMI_PDEV_PARAM_ANI_LISTEN_PERIOD, 3876 /* configure OFDM immunity level */ 3877 WMI_PDEV_PARAM_ANI_OFDM_LEVEL, 3878 /* configure CCK immunity level */ 3879 WMI_PDEV_PARAM_ANI_CCK_LEVEL, 3880 /* Enable/Disable CDD for 1x1 STAs in rate control module */ 3881 WMI_PDEV_PARAM_DYNTXCHAIN, 3882 /* Enable/Disable proxy STA */ 3883 WMI_PDEV_PARAM_PROXY_STA, 3884 /* Enable/Disable low power state when all VDEVs are inactive/idle. */ 3885 WMI_PDEV_PARAM_IDLE_PS_CONFIG, 3886 /* Enable/Disable power gating sleep */ 3887 WMI_PDEV_PARAM_POWER_GATING_SLEEP, 3888 }; 3889 3890 enum wmi_10x_pdev_param { 3891 /* TX chian mask */ 3892 WMI_10X_PDEV_PARAM_TX_CHAIN_MASK = 0x1, 3893 /* RX chian mask */ 3894 WMI_10X_PDEV_PARAM_RX_CHAIN_MASK, 3895 /* TX power limit for 2G Radio */ 3896 WMI_10X_PDEV_PARAM_TXPOWER_LIMIT2G, 3897 /* TX power limit for 5G Radio */ 3898 WMI_10X_PDEV_PARAM_TXPOWER_LIMIT5G, 3899 /* TX power scale */ 3900 WMI_10X_PDEV_PARAM_TXPOWER_SCALE, 3901 /* Beacon generation mode . 0: host, 1: target */ 3902 WMI_10X_PDEV_PARAM_BEACON_GEN_MODE, 3903 /* Beacon generation mode . 0: staggered 1: bursted */ 3904 WMI_10X_PDEV_PARAM_BEACON_TX_MODE, 3905 /* 3906 * Resource manager off chan mode . 3907 * 0: turn off off chan mode. 1: turn on offchan mode 3908 */ 3909 WMI_10X_PDEV_PARAM_RESMGR_OFFCHAN_MODE, 3910 /* 3911 * Protection mode: 3912 * 0: no protection 1:use CTS-to-self 2: use RTS/CTS 3913 */ 3914 WMI_10X_PDEV_PARAM_PROTECTION_MODE, 3915 /* Dynamic bandwidth 0: disable 1: enable */ 3916 WMI_10X_PDEV_PARAM_DYNAMIC_BW, 3917 /* Non aggregrate/ 11g sw retry threshold.0-disable */ 3918 WMI_10X_PDEV_PARAM_NON_AGG_SW_RETRY_TH, 3919 /* aggregrate sw retry threshold. 0-disable*/ 3920 WMI_10X_PDEV_PARAM_AGG_SW_RETRY_TH, 3921 /* Station kickout threshold (non of consecutive failures).0-disable */ 3922 WMI_10X_PDEV_PARAM_STA_KICKOUT_TH, 3923 /* Aggerate size scaling configuration per AC */ 3924 WMI_10X_PDEV_PARAM_AC_AGGRSIZE_SCALING, 3925 /* LTR enable */ 3926 WMI_10X_PDEV_PARAM_LTR_ENABLE, 3927 /* LTR latency for BE, in us */ 3928 WMI_10X_PDEV_PARAM_LTR_AC_LATENCY_BE, 3929 /* LTR latency for BK, in us */ 3930 WMI_10X_PDEV_PARAM_LTR_AC_LATENCY_BK, 3931 /* LTR latency for VI, in us */ 3932 WMI_10X_PDEV_PARAM_LTR_AC_LATENCY_VI, 3933 /* LTR latency for VO, in us */ 3934 WMI_10X_PDEV_PARAM_LTR_AC_LATENCY_VO, 3935 /* LTR AC latency timeout, in ms */ 3936 WMI_10X_PDEV_PARAM_LTR_AC_LATENCY_TIMEOUT, 3937 /* LTR platform latency override, in us */ 3938 WMI_10X_PDEV_PARAM_LTR_SLEEP_OVERRIDE, 3939 /* LTR-RX override, in us */ 3940 WMI_10X_PDEV_PARAM_LTR_RX_OVERRIDE, 3941 /* Tx activity timeout for LTR, in us */ 3942 WMI_10X_PDEV_PARAM_LTR_TX_ACTIVITY_TIMEOUT, 3943 /* L1SS state machine enable */ 3944 WMI_10X_PDEV_PARAM_L1SS_ENABLE, 3945 /* Deep sleep state machine enable */ 3946 WMI_10X_PDEV_PARAM_DSLEEP_ENABLE, 3947 /* pdev level stats update period in ms */ 3948 WMI_10X_PDEV_PARAM_PDEV_STATS_UPDATE_PERIOD, 3949 /* vdev level stats update period in ms */ 3950 WMI_10X_PDEV_PARAM_VDEV_STATS_UPDATE_PERIOD, 3951 /* peer level stats update period in ms */ 3952 WMI_10X_PDEV_PARAM_PEER_STATS_UPDATE_PERIOD, 3953 /* beacon filter status update period */ 3954 WMI_10X_PDEV_PARAM_BCNFLT_STATS_UPDATE_PERIOD, 3955 /* QOS Mgmt frame protection MFP/PMF 0: disable, 1: enable */ 3956 WMI_10X_PDEV_PARAM_PMF_QOS, 3957 /* Access category on which ARP and DHCP frames are sent */ 3958 WMI_10X_PDEV_PARAM_ARPDHCP_AC_OVERRIDE, 3959 /* DCS configuration */ 3960 WMI_10X_PDEV_PARAM_DCS, 3961 /* Enable/Disable ANI on target */ 3962 WMI_10X_PDEV_PARAM_ANI_ENABLE, 3963 /* configure the ANI polling period */ 3964 WMI_10X_PDEV_PARAM_ANI_POLL_PERIOD, 3965 /* configure the ANI listening period */ 3966 WMI_10X_PDEV_PARAM_ANI_LISTEN_PERIOD, 3967 /* configure OFDM immunity level */ 3968 WMI_10X_PDEV_PARAM_ANI_OFDM_LEVEL, 3969 /* configure CCK immunity level */ 3970 WMI_10X_PDEV_PARAM_ANI_CCK_LEVEL, 3971 /* Enable/Disable CDD for 1x1 STAs in rate control module */ 3972 WMI_10X_PDEV_PARAM_DYNTXCHAIN, 3973 /* Enable/Disable Fast channel reset*/ 3974 WMI_10X_PDEV_PARAM_FAST_CHANNEL_RESET, 3975 /* Set Bursting DUR */ 3976 WMI_10X_PDEV_PARAM_BURST_DUR, 3977 /* Set Bursting Enable*/ 3978 WMI_10X_PDEV_PARAM_BURST_ENABLE, 3979 3980 /* following are available as of firmware 10.2 */ 3981 WMI_10X_PDEV_PARAM_SMART_ANTENNA_DEFAULT_ANTENNA, 3982 WMI_10X_PDEV_PARAM_IGMPMLD_OVERRIDE, 3983 WMI_10X_PDEV_PARAM_IGMPMLD_TID, 3984 WMI_10X_PDEV_PARAM_ANTENNA_GAIN, 3985 WMI_10X_PDEV_PARAM_RX_DECAP_MODE, 3986 WMI_10X_PDEV_PARAM_RX_FILTER, 3987 WMI_10X_PDEV_PARAM_SET_MCAST_TO_UCAST_TID, 3988 WMI_10X_PDEV_PARAM_PROXY_STA_MODE, 3989 WMI_10X_PDEV_PARAM_SET_MCAST2UCAST_MODE, 3990 WMI_10X_PDEV_PARAM_SET_MCAST2UCAST_BUFFER, 3991 WMI_10X_PDEV_PARAM_REMOVE_MCAST2UCAST_BUFFER, 3992 WMI_10X_PDEV_PARAM_PEER_STA_PS_STATECHG_ENABLE, 3993 WMI_10X_PDEV_PARAM_RTS_FIXED_RATE, 3994 WMI_10X_PDEV_PARAM_CAL_PERIOD, 3995 WMI_10X_PDEV_PARAM_ATF_STRICT_SCH, 3996 WMI_10X_PDEV_PARAM_ATF_SCHED_DURATION, 3997 WMI_10X_PDEV_PARAM_SET_PROMISC_MODE_CMDID, 3998 WMI_10X_PDEV_PARAM_PDEV_RESET 3999 }; 4000 4001 enum wmi_10_4_pdev_param { 4002 WMI_10_4_PDEV_PARAM_TX_CHAIN_MASK = 0x1, 4003 WMI_10_4_PDEV_PARAM_RX_CHAIN_MASK, 4004 WMI_10_4_PDEV_PARAM_TXPOWER_LIMIT2G, 4005 WMI_10_4_PDEV_PARAM_TXPOWER_LIMIT5G, 4006 WMI_10_4_PDEV_PARAM_TXPOWER_SCALE, 4007 WMI_10_4_PDEV_PARAM_BEACON_GEN_MODE, 4008 WMI_10_4_PDEV_PARAM_BEACON_TX_MODE, 4009 WMI_10_4_PDEV_PARAM_RESMGR_OFFCHAN_MODE, 4010 WMI_10_4_PDEV_PARAM_PROTECTION_MODE, 4011 WMI_10_4_PDEV_PARAM_DYNAMIC_BW, 4012 WMI_10_4_PDEV_PARAM_NON_AGG_SW_RETRY_TH, 4013 WMI_10_4_PDEV_PARAM_AGG_SW_RETRY_TH, 4014 WMI_10_4_PDEV_PARAM_STA_KICKOUT_TH, 4015 WMI_10_4_PDEV_PARAM_AC_AGGRSIZE_SCALING, 4016 WMI_10_4_PDEV_PARAM_LTR_ENABLE, 4017 WMI_10_4_PDEV_PARAM_LTR_AC_LATENCY_BE, 4018 WMI_10_4_PDEV_PARAM_LTR_AC_LATENCY_BK, 4019 WMI_10_4_PDEV_PARAM_LTR_AC_LATENCY_VI, 4020 WMI_10_4_PDEV_PARAM_LTR_AC_LATENCY_VO, 4021 WMI_10_4_PDEV_PARAM_LTR_AC_LATENCY_TIMEOUT, 4022 WMI_10_4_PDEV_PARAM_LTR_SLEEP_OVERRIDE, 4023 WMI_10_4_PDEV_PARAM_LTR_RX_OVERRIDE, 4024 WMI_10_4_PDEV_PARAM_LTR_TX_ACTIVITY_TIMEOUT, 4025 WMI_10_4_PDEV_PARAM_L1SS_ENABLE, 4026 WMI_10_4_PDEV_PARAM_DSLEEP_ENABLE, 4027 WMI_10_4_PDEV_PARAM_PCIELP_TXBUF_FLUSH, 4028 WMI_10_4_PDEV_PARAM_PCIELP_TXBUF_WATERMARK, 4029 WMI_10_4_PDEV_PARAM_PCIELP_TXBUF_TMO_EN, 4030 WMI_10_4_PDEV_PARAM_PCIELP_TXBUF_TMO_VALUE, 4031 WMI_10_4_PDEV_PARAM_PDEV_STATS_UPDATE_PERIOD, 4032 WMI_10_4_PDEV_PARAM_VDEV_STATS_UPDATE_PERIOD, 4033 WMI_10_4_PDEV_PARAM_PEER_STATS_UPDATE_PERIOD, 4034 WMI_10_4_PDEV_PARAM_BCNFLT_STATS_UPDATE_PERIOD, 4035 WMI_10_4_PDEV_PARAM_PMF_QOS, 4036 WMI_10_4_PDEV_PARAM_ARP_AC_OVERRIDE, 4037 WMI_10_4_PDEV_PARAM_DCS, 4038 WMI_10_4_PDEV_PARAM_ANI_ENABLE, 4039 WMI_10_4_PDEV_PARAM_ANI_POLL_PERIOD, 4040 WMI_10_4_PDEV_PARAM_ANI_LISTEN_PERIOD, 4041 WMI_10_4_PDEV_PARAM_ANI_OFDM_LEVEL, 4042 WMI_10_4_PDEV_PARAM_ANI_CCK_LEVEL, 4043 WMI_10_4_PDEV_PARAM_DYNTXCHAIN, 4044 WMI_10_4_PDEV_PARAM_PROXY_STA, 4045 WMI_10_4_PDEV_PARAM_IDLE_PS_CONFIG, 4046 WMI_10_4_PDEV_PARAM_POWER_GATING_SLEEP, 4047 WMI_10_4_PDEV_PARAM_AGGR_BURST, 4048 WMI_10_4_PDEV_PARAM_RX_DECAP_MODE, 4049 WMI_10_4_PDEV_PARAM_FAST_CHANNEL_RESET, 4050 WMI_10_4_PDEV_PARAM_BURST_DUR, 4051 WMI_10_4_PDEV_PARAM_BURST_ENABLE, 4052 WMI_10_4_PDEV_PARAM_SMART_ANTENNA_DEFAULT_ANTENNA, 4053 WMI_10_4_PDEV_PARAM_IGMPMLD_OVERRIDE, 4054 WMI_10_4_PDEV_PARAM_IGMPMLD_TID, 4055 WMI_10_4_PDEV_PARAM_ANTENNA_GAIN, 4056 WMI_10_4_PDEV_PARAM_RX_FILTER, 4057 WMI_10_4_PDEV_SET_MCAST_TO_UCAST_TID, 4058 WMI_10_4_PDEV_PARAM_PROXY_STA_MODE, 4059 WMI_10_4_PDEV_PARAM_SET_MCAST2UCAST_MODE, 4060 WMI_10_4_PDEV_PARAM_SET_MCAST2UCAST_BUFFER, 4061 WMI_10_4_PDEV_PARAM_REMOVE_MCAST2UCAST_BUFFER, 4062 WMI_10_4_PDEV_PEER_STA_PS_STATECHG_ENABLE, 4063 WMI_10_4_PDEV_PARAM_IGMPMLD_AC_OVERRIDE, 4064 WMI_10_4_PDEV_PARAM_BLOCK_INTERBSS, 4065 WMI_10_4_PDEV_PARAM_SET_DISABLE_RESET_CMDID, 4066 WMI_10_4_PDEV_PARAM_SET_MSDU_TTL_CMDID, 4067 WMI_10_4_PDEV_PARAM_SET_PPDU_DURATION_CMDID, 4068 WMI_10_4_PDEV_PARAM_TXBF_SOUND_PERIOD_CMDID, 4069 WMI_10_4_PDEV_PARAM_SET_PROMISC_MODE_CMDID, 4070 WMI_10_4_PDEV_PARAM_SET_BURST_MODE_CMDID, 4071 WMI_10_4_PDEV_PARAM_EN_STATS, 4072 WMI_10_4_PDEV_PARAM_MU_GROUP_POLICY, 4073 WMI_10_4_PDEV_PARAM_NOISE_DETECTION, 4074 WMI_10_4_PDEV_PARAM_NOISE_THRESHOLD, 4075 WMI_10_4_PDEV_PARAM_DPD_ENABLE, 4076 WMI_10_4_PDEV_PARAM_SET_MCAST_BCAST_ECHO, 4077 WMI_10_4_PDEV_PARAM_ATF_STRICT_SCH, 4078 WMI_10_4_PDEV_PARAM_ATF_SCHED_DURATION, 4079 WMI_10_4_PDEV_PARAM_ANT_PLZN, 4080 WMI_10_4_PDEV_PARAM_MGMT_RETRY_LIMIT, 4081 WMI_10_4_PDEV_PARAM_SENSITIVITY_LEVEL, 4082 WMI_10_4_PDEV_PARAM_SIGNED_TXPOWER_2G, 4083 WMI_10_4_PDEV_PARAM_SIGNED_TXPOWER_5G, 4084 WMI_10_4_PDEV_PARAM_ENABLE_PER_TID_AMSDU, 4085 WMI_10_4_PDEV_PARAM_ENABLE_PER_TID_AMPDU, 4086 WMI_10_4_PDEV_PARAM_CCA_THRESHOLD, 4087 WMI_10_4_PDEV_PARAM_RTS_FIXED_RATE, 4088 WMI_10_4_PDEV_PARAM_CAL_PERIOD, 4089 WMI_10_4_PDEV_PARAM_PDEV_RESET, 4090 WMI_10_4_PDEV_PARAM_WAPI_MBSSID_OFFSET, 4091 WMI_10_4_PDEV_PARAM_ARP_SRCADDR, 4092 WMI_10_4_PDEV_PARAM_ARP_DSTADDR, 4093 WMI_10_4_PDEV_PARAM_TXPOWER_DECR_DB, 4094 WMI_10_4_PDEV_PARAM_RX_BATCHMODE, 4095 WMI_10_4_PDEV_PARAM_PACKET_AGGR_DELAY, 4096 WMI_10_4_PDEV_PARAM_ATF_OBSS_NOISE_SCH, 4097 WMI_10_4_PDEV_PARAM_ATF_OBSS_NOISE_SCALING_FACTOR, 4098 WMI_10_4_PDEV_PARAM_CUST_TXPOWER_SCALE, 4099 WMI_10_4_PDEV_PARAM_ATF_DYNAMIC_ENABLE, 4100 WMI_10_4_PDEV_PARAM_ATF_SSID_GROUP_POLICY, 4101 WMI_10_4_PDEV_PARAM_ENABLE_BTCOEX, 4102 }; 4103 4104 struct wmi_pdev_set_param_cmd { 4105 __le32 param_id; 4106 __le32 param_value; 4107 } __packed; 4108 4109 struct wmi_pdev_set_base_macaddr_cmd { 4110 struct wmi_mac_addr mac_addr; 4111 } __packed; 4112 4113 /* valid period is 1 ~ 60000ms, unit in millisecond */ 4114 #define WMI_PDEV_PARAM_CAL_PERIOD_MAX 60000 4115 4116 struct wmi_pdev_get_tpc_config_cmd { 4117 /* parameter */ 4118 __le32 param; 4119 } __packed; 4120 4121 #define WMI_TPC_CONFIG_PARAM 1 4122 #define WMI_TPC_FINAL_RATE_MAX 240 4123 #define WMI_TPC_TX_N_CHAIN 4 4124 #define WMI_TPC_RATE_MAX (WMI_TPC_TX_N_CHAIN * 65) 4125 #define WMI_TPC_PREAM_TABLE_MAX 10 4126 #define WMI_TPC_FLAG 3 4127 #define WMI_TPC_BUF_SIZE 10 4128 #define WMI_TPC_BEAMFORMING 2 4129 4130 enum wmi_tpc_table_type { 4131 WMI_TPC_TABLE_TYPE_CDD = 0, 4132 WMI_TPC_TABLE_TYPE_STBC = 1, 4133 WMI_TPC_TABLE_TYPE_TXBF = 2, 4134 }; 4135 4136 enum wmi_tpc_config_event_flag { 4137 WMI_TPC_CONFIG_EVENT_FLAG_TABLE_CDD = 0x1, 4138 WMI_TPC_CONFIG_EVENT_FLAG_TABLE_STBC = 0x2, 4139 WMI_TPC_CONFIG_EVENT_FLAG_TABLE_TXBF = 0x4, 4140 }; 4141 4142 struct wmi_pdev_tpc_config_event { 4143 __le32 reg_domain; 4144 __le32 chan_freq; 4145 __le32 phy_mode; 4146 __le32 twice_antenna_reduction; 4147 __le32 twice_max_rd_power; 4148 a_sle32 twice_antenna_gain; 4149 __le32 power_limit; 4150 __le32 rate_max; 4151 __le32 num_tx_chain; 4152 __le32 ctl; 4153 __le32 flags; 4154 s8 max_reg_allow_pow[WMI_TPC_TX_N_CHAIN]; 4155 s8 max_reg_allow_pow_agcdd[WMI_TPC_TX_N_CHAIN][WMI_TPC_TX_N_CHAIN]; 4156 s8 max_reg_allow_pow_agstbc[WMI_TPC_TX_N_CHAIN][WMI_TPC_TX_N_CHAIN]; 4157 s8 max_reg_allow_pow_agtxbf[WMI_TPC_TX_N_CHAIN][WMI_TPC_TX_N_CHAIN]; 4158 u8 rates_array[WMI_TPC_RATE_MAX]; 4159 } __packed; 4160 4161 /* Transmit power scale factor. */ 4162 enum wmi_tp_scale { 4163 WMI_TP_SCALE_MAX = 0, /* no scaling (default) */ 4164 WMI_TP_SCALE_50 = 1, /* 50% of max (-3 dBm) */ 4165 WMI_TP_SCALE_25 = 2, /* 25% of max (-6 dBm) */ 4166 WMI_TP_SCALE_12 = 3, /* 12% of max (-9 dBm) */ 4167 WMI_TP_SCALE_MIN = 4, /* min, but still on */ 4168 WMI_TP_SCALE_SIZE = 5, /* max num of enum */ 4169 }; 4170 4171 struct wmi_pdev_tpc_final_table_event { 4172 __le32 reg_domain; 4173 __le32 chan_freq; 4174 __le32 phy_mode; 4175 __le32 twice_antenna_reduction; 4176 __le32 twice_max_rd_power; 4177 a_sle32 twice_antenna_gain; 4178 __le32 power_limit; 4179 __le32 rate_max; 4180 __le32 num_tx_chain; 4181 __le32 ctl; 4182 __le32 flags; 4183 s8 max_reg_allow_pow[WMI_TPC_TX_N_CHAIN]; 4184 s8 max_reg_allow_pow_agcdd[WMI_TPC_TX_N_CHAIN][WMI_TPC_TX_N_CHAIN]; 4185 s8 max_reg_allow_pow_agstbc[WMI_TPC_TX_N_CHAIN][WMI_TPC_TX_N_CHAIN]; 4186 s8 max_reg_allow_pow_agtxbf[WMI_TPC_TX_N_CHAIN][WMI_TPC_TX_N_CHAIN]; 4187 u8 rates_array[WMI_TPC_FINAL_RATE_MAX]; 4188 u8 ctl_power_table[WMI_TPC_BEAMFORMING][WMI_TPC_TX_N_CHAIN] 4189 [WMI_TPC_TX_N_CHAIN]; 4190 } __packed; 4191 4192 struct wmi_pdev_get_tpc_table_cmd { 4193 __le32 param; 4194 } __packed; 4195 4196 enum wmi_tpc_pream_2ghz { 4197 WMI_TPC_PREAM_2GHZ_CCK = 0, 4198 WMI_TPC_PREAM_2GHZ_OFDM, 4199 WMI_TPC_PREAM_2GHZ_HT20, 4200 WMI_TPC_PREAM_2GHZ_HT40, 4201 WMI_TPC_PREAM_2GHZ_VHT20, 4202 WMI_TPC_PREAM_2GHZ_VHT40, 4203 WMI_TPC_PREAM_2GHZ_VHT80, 4204 }; 4205 4206 enum wmi_tpc_pream_5ghz { 4207 WMI_TPC_PREAM_5GHZ_OFDM = 1, 4208 WMI_TPC_PREAM_5GHZ_HT20, 4209 WMI_TPC_PREAM_5GHZ_HT40, 4210 WMI_TPC_PREAM_5GHZ_VHT20, 4211 WMI_TPC_PREAM_5GHZ_VHT40, 4212 WMI_TPC_PREAM_5GHZ_VHT80, 4213 WMI_TPC_PREAM_5GHZ_HTCUP, 4214 }; 4215 4216 #define WMI_PEER_PS_STATE_DISABLED 2 4217 4218 struct wmi_peer_sta_ps_state_chg_event { 4219 struct wmi_mac_addr peer_macaddr; 4220 __le32 peer_ps_state; 4221 } __packed; 4222 4223 struct wmi_pdev_chanlist_update_event { 4224 /* number of channels */ 4225 __le32 num_chan; 4226 /* array of channels */ 4227 struct wmi_channel channel_list[1]; 4228 } __packed; 4229 4230 #define WMI_MAX_DEBUG_MESG (sizeof(u32) * 32) 4231 4232 struct wmi_debug_mesg_event { 4233 /* message buffer, NULL terminated */ 4234 char bufp[WMI_MAX_DEBUG_MESG]; 4235 } __packed; 4236 4237 enum { 4238 /* P2P device */ 4239 VDEV_SUBTYPE_P2PDEV = 0, 4240 /* P2P client */ 4241 VDEV_SUBTYPE_P2PCLI, 4242 /* P2P GO */ 4243 VDEV_SUBTYPE_P2PGO, 4244 /* BT3.0 HS */ 4245 VDEV_SUBTYPE_BT, 4246 }; 4247 4248 struct wmi_pdev_set_channel_cmd { 4249 /* idnore power , only use flags , mode and freq */ 4250 struct wmi_channel chan; 4251 } __packed; 4252 4253 struct wmi_pdev_pktlog_enable_cmd { 4254 __le32 ev_bitmap; 4255 } __packed; 4256 4257 /* Customize the DSCP (bit) to TID (0-7) mapping for QOS */ 4258 #define WMI_DSCP_MAP_MAX (64) 4259 struct wmi_pdev_set_dscp_tid_map_cmd { 4260 /* map indicating DSCP to TID conversion */ 4261 __le32 dscp_to_tid_map[WMI_DSCP_MAP_MAX]; 4262 } __packed; 4263 4264 enum mcast_bcast_rate_id { 4265 WMI_SET_MCAST_RATE, 4266 WMI_SET_BCAST_RATE 4267 }; 4268 4269 struct mcast_bcast_rate { 4270 enum mcast_bcast_rate_id rate_id; 4271 __le32 rate; 4272 } __packed; 4273 4274 struct wmi_wmm_params { 4275 __le32 cwmin; 4276 __le32 cwmax; 4277 __le32 aifs; 4278 __le32 txop; 4279 __le32 acm; 4280 __le32 no_ack; 4281 } __packed; 4282 4283 struct wmi_pdev_set_wmm_params { 4284 struct wmi_wmm_params ac_be; 4285 struct wmi_wmm_params ac_bk; 4286 struct wmi_wmm_params ac_vi; 4287 struct wmi_wmm_params ac_vo; 4288 } __packed; 4289 4290 struct wmi_wmm_params_arg { 4291 u32 cwmin; 4292 u32 cwmax; 4293 u32 aifs; 4294 u32 txop; 4295 u32 acm; 4296 u32 no_ack; 4297 }; 4298 4299 struct wmi_wmm_params_all_arg { 4300 struct wmi_wmm_params_arg ac_be; 4301 struct wmi_wmm_params_arg ac_bk; 4302 struct wmi_wmm_params_arg ac_vi; 4303 struct wmi_wmm_params_arg ac_vo; 4304 }; 4305 4306 struct wmi_pdev_stats_tx { 4307 /* Num HTT cookies queued to dispatch list */ 4308 __le32 comp_queued; 4309 4310 /* Num HTT cookies dispatched */ 4311 __le32 comp_delivered; 4312 4313 /* Num MSDU queued to WAL */ 4314 __le32 msdu_enqued; 4315 4316 /* Num MPDU queue to WAL */ 4317 __le32 mpdu_enqued; 4318 4319 /* Num MSDUs dropped by WMM limit */ 4320 __le32 wmm_drop; 4321 4322 /* Num Local frames queued */ 4323 __le32 local_enqued; 4324 4325 /* Num Local frames done */ 4326 __le32 local_freed; 4327 4328 /* Num queued to HW */ 4329 __le32 hw_queued; 4330 4331 /* Num PPDU reaped from HW */ 4332 __le32 hw_reaped; 4333 4334 /* Num underruns */ 4335 __le32 underrun; 4336 4337 /* Num PPDUs cleaned up in TX abort */ 4338 __le32 tx_abort; 4339 4340 /* Num MPDUs requed by SW */ 4341 __le32 mpdus_requed; 4342 4343 /* excessive retries */ 4344 __le32 tx_ko; 4345 4346 /* data hw rate code */ 4347 __le32 data_rc; 4348 4349 /* Scheduler self triggers */ 4350 __le32 self_triggers; 4351 4352 /* frames dropped due to excessive sw retries */ 4353 __le32 sw_retry_failure; 4354 4355 /* illegal rate phy errors */ 4356 __le32 illgl_rate_phy_err; 4357 4358 /* wal pdev continuous xretry */ 4359 __le32 pdev_cont_xretry; 4360 4361 /* wal pdev continous xretry */ 4362 __le32 pdev_tx_timeout; 4363 4364 /* wal pdev resets */ 4365 __le32 pdev_resets; 4366 4367 /* frames dropped due to non-availability of stateless TIDs */ 4368 __le32 stateless_tid_alloc_failure; 4369 4370 __le32 phy_underrun; 4371 4372 /* MPDU is more than txop limit */ 4373 __le32 txop_ovf; 4374 } __packed; 4375 4376 struct wmi_10_4_pdev_stats_tx { 4377 /* Num HTT cookies queued to dispatch list */ 4378 __le32 comp_queued; 4379 4380 /* Num HTT cookies dispatched */ 4381 __le32 comp_delivered; 4382 4383 /* Num MSDU queued to WAL */ 4384 __le32 msdu_enqued; 4385 4386 /* Num MPDU queue to WAL */ 4387 __le32 mpdu_enqued; 4388 4389 /* Num MSDUs dropped by WMM limit */ 4390 __le32 wmm_drop; 4391 4392 /* Num Local frames queued */ 4393 __le32 local_enqued; 4394 4395 /* Num Local frames done */ 4396 __le32 local_freed; 4397 4398 /* Num queued to HW */ 4399 __le32 hw_queued; 4400 4401 /* Num PPDU reaped from HW */ 4402 __le32 hw_reaped; 4403 4404 /* Num underruns */ 4405 __le32 underrun; 4406 4407 /* HW Paused. */ 4408 __le32 hw_paused; 4409 4410 /* Num PPDUs cleaned up in TX abort */ 4411 __le32 tx_abort; 4412 4413 /* Num MPDUs requed by SW */ 4414 __le32 mpdus_requed; 4415 4416 /* excessive retries */ 4417 __le32 tx_ko; 4418 4419 /* data hw rate code */ 4420 __le32 data_rc; 4421 4422 /* Scheduler self triggers */ 4423 __le32 self_triggers; 4424 4425 /* frames dropped due to excessive sw retries */ 4426 __le32 sw_retry_failure; 4427 4428 /* illegal rate phy errors */ 4429 __le32 illgl_rate_phy_err; 4430 4431 /* wal pdev continuous xretry */ 4432 __le32 pdev_cont_xretry; 4433 4434 /* wal pdev tx timeouts */ 4435 __le32 pdev_tx_timeout; 4436 4437 /* wal pdev resets */ 4438 __le32 pdev_resets; 4439 4440 /* frames dropped due to non-availability of stateless TIDs */ 4441 __le32 stateless_tid_alloc_failure; 4442 4443 __le32 phy_underrun; 4444 4445 /* MPDU is more than txop limit */ 4446 __le32 txop_ovf; 4447 4448 /* Number of Sequences posted */ 4449 __le32 seq_posted; 4450 4451 /* Number of Sequences failed queueing */ 4452 __le32 seq_failed_queueing; 4453 4454 /* Number of Sequences completed */ 4455 __le32 seq_completed; 4456 4457 /* Number of Sequences restarted */ 4458 __le32 seq_restarted; 4459 4460 /* Number of MU Sequences posted */ 4461 __le32 mu_seq_posted; 4462 4463 /* Num MPDUs flushed by SW, HWPAUSED,SW TXABORT(Reset,channel change) */ 4464 __le32 mpdus_sw_flush; 4465 4466 /* Num MPDUs filtered by HW, all filter condition (TTL expired) */ 4467 __le32 mpdus_hw_filter; 4468 4469 /* Num MPDUs truncated by PDG 4470 * (TXOP, TBTT, PPDU_duration based on rate, dyn_bw) 4471 */ 4472 __le32 mpdus_truncated; 4473 4474 /* Num MPDUs that was tried but didn't receive ACK or BA */ 4475 __le32 mpdus_ack_failed; 4476 4477 /* Num MPDUs that was dropped due to expiry. */ 4478 __le32 mpdus_expired; 4479 } __packed; 4480 4481 struct wmi_pdev_stats_rx { 4482 /* Cnts any change in ring routing mid-ppdu */ 4483 __le32 mid_ppdu_route_change; 4484 4485 /* Total number of statuses processed */ 4486 __le32 status_rcvd; 4487 4488 /* Extra frags on rings 0-3 */ 4489 __le32 r0_frags; 4490 __le32 r1_frags; 4491 __le32 r2_frags; 4492 __le32 r3_frags; 4493 4494 /* MSDUs / MPDUs delivered to HTT */ 4495 __le32 htt_msdus; 4496 __le32 htt_mpdus; 4497 4498 /* MSDUs / MPDUs delivered to local stack */ 4499 __le32 loc_msdus; 4500 __le32 loc_mpdus; 4501 4502 /* AMSDUs that have more MSDUs than the status ring size */ 4503 __le32 oversize_amsdu; 4504 4505 /* Number of PHY errors */ 4506 __le32 phy_errs; 4507 4508 /* Number of PHY errors drops */ 4509 __le32 phy_err_drop; 4510 4511 /* Number of mpdu errors - FCS, MIC, ENC etc. */ 4512 __le32 mpdu_errs; 4513 } __packed; 4514 4515 struct wmi_pdev_stats_peer { 4516 /* REMOVE THIS ONCE REAL PEER STAT COUNTERS ARE ADDED */ 4517 __le32 dummy; 4518 } __packed; 4519 4520 enum wmi_stats_id { 4521 WMI_STAT_PEER = BIT(0), 4522 WMI_STAT_AP = BIT(1), 4523 WMI_STAT_PDEV = BIT(2), 4524 WMI_STAT_VDEV = BIT(3), 4525 WMI_STAT_BCNFLT = BIT(4), 4526 WMI_STAT_VDEV_RATE = BIT(5), 4527 }; 4528 4529 enum wmi_10_4_stats_id { 4530 WMI_10_4_STAT_PEER = BIT(0), 4531 WMI_10_4_STAT_AP = BIT(1), 4532 WMI_10_4_STAT_INST = BIT(2), 4533 WMI_10_4_STAT_PEER_EXTD = BIT(3), 4534 WMI_10_4_STAT_VDEV_EXTD = BIT(4), 4535 }; 4536 4537 enum wmi_tlv_stats_id { 4538 WMI_TLV_STAT_PEER = BIT(0), 4539 WMI_TLV_STAT_AP = BIT(1), 4540 WMI_TLV_STAT_PDEV = BIT(2), 4541 WMI_TLV_STAT_VDEV = BIT(3), 4542 WMI_TLV_STAT_PEER_EXTD = BIT(10), 4543 }; 4544 4545 struct wlan_inst_rssi_args { 4546 __le16 cfg_retry_count; 4547 __le16 retry_count; 4548 }; 4549 4550 struct wmi_request_stats_cmd { 4551 __le32 stats_id; 4552 4553 __le32 vdev_id; 4554 4555 /* peer MAC address */ 4556 struct wmi_mac_addr peer_macaddr; 4557 4558 /* Instantaneous RSSI arguments */ 4559 struct wlan_inst_rssi_args inst_rssi_args; 4560 } __packed; 4561 4562 /* Suspend option */ 4563 enum { 4564 /* suspend */ 4565 WMI_PDEV_SUSPEND, 4566 4567 /* suspend and disable all interrupts */ 4568 WMI_PDEV_SUSPEND_AND_DISABLE_INTR, 4569 }; 4570 4571 struct wmi_pdev_suspend_cmd { 4572 /* suspend option sent to target */ 4573 __le32 suspend_opt; 4574 } __packed; 4575 4576 struct wmi_stats_event { 4577 __le32 stats_id; /* WMI_STAT_ */ 4578 /* 4579 * number of pdev stats event structures 4580 * (wmi_pdev_stats) 0 or 1 4581 */ 4582 __le32 num_pdev_stats; 4583 /* 4584 * number of vdev stats event structures 4585 * (wmi_vdev_stats) 0 or max vdevs 4586 */ 4587 __le32 num_vdev_stats; 4588 /* 4589 * number of peer stats event structures 4590 * (wmi_peer_stats) 0 or max peers 4591 */ 4592 __le32 num_peer_stats; 4593 __le32 num_bcnflt_stats; 4594 /* 4595 * followed by 4596 * num_pdev_stats * size of(struct wmi_pdev_stats) 4597 * num_vdev_stats * size of(struct wmi_vdev_stats) 4598 * num_peer_stats * size of(struct wmi_peer_stats) 4599 * 4600 * By having a zero sized array, the pointer to data area 4601 * becomes available without increasing the struct size 4602 */ 4603 u8 data[0]; 4604 } __packed; 4605 4606 struct wmi_10_2_stats_event { 4607 __le32 stats_id; /* %WMI_REQUEST_ */ 4608 __le32 num_pdev_stats; 4609 __le32 num_pdev_ext_stats; 4610 __le32 num_vdev_stats; 4611 __le32 num_peer_stats; 4612 __le32 num_bcnflt_stats; 4613 u8 data[0]; 4614 } __packed; 4615 4616 /* 4617 * PDEV statistics 4618 * TODO: add all PDEV stats here 4619 */ 4620 struct wmi_pdev_stats_base { 4621 __le32 chan_nf; 4622 __le32 tx_frame_count; /* Cycles spent transmitting frames */ 4623 __le32 rx_frame_count; /* Cycles spent receiving frames */ 4624 __le32 rx_clear_count; /* Total channel busy time, evidently */ 4625 __le32 cycle_count; /* Total on-channel time */ 4626 __le32 phy_err_count; 4627 __le32 chan_tx_pwr; 4628 } __packed; 4629 4630 struct wmi_pdev_stats { 4631 struct wmi_pdev_stats_base base; 4632 struct wmi_pdev_stats_tx tx; 4633 struct wmi_pdev_stats_rx rx; 4634 struct wmi_pdev_stats_peer peer; 4635 } __packed; 4636 4637 struct wmi_pdev_stats_extra { 4638 __le32 ack_rx_bad; 4639 __le32 rts_bad; 4640 __le32 rts_good; 4641 __le32 fcs_bad; 4642 __le32 no_beacons; 4643 __le32 mib_int_count; 4644 } __packed; 4645 4646 struct wmi_10x_pdev_stats { 4647 struct wmi_pdev_stats_base base; 4648 struct wmi_pdev_stats_tx tx; 4649 struct wmi_pdev_stats_rx rx; 4650 struct wmi_pdev_stats_peer peer; 4651 struct wmi_pdev_stats_extra extra; 4652 } __packed; 4653 4654 struct wmi_pdev_stats_mem { 4655 __le32 dram_free; 4656 __le32 iram_free; 4657 } __packed; 4658 4659 struct wmi_10_2_pdev_stats { 4660 struct wmi_pdev_stats_base base; 4661 struct wmi_pdev_stats_tx tx; 4662 __le32 mc_drop; 4663 struct wmi_pdev_stats_rx rx; 4664 __le32 pdev_rx_timeout; 4665 struct wmi_pdev_stats_mem mem; 4666 struct wmi_pdev_stats_peer peer; 4667 struct wmi_pdev_stats_extra extra; 4668 } __packed; 4669 4670 struct wmi_10_4_pdev_stats { 4671 struct wmi_pdev_stats_base base; 4672 struct wmi_10_4_pdev_stats_tx tx; 4673 struct wmi_pdev_stats_rx rx; 4674 __le32 rx_ovfl_errs; 4675 struct wmi_pdev_stats_mem mem; 4676 __le32 sram_free_size; 4677 struct wmi_pdev_stats_extra extra; 4678 } __packed; 4679 4680 /* 4681 * VDEV statistics 4682 */ 4683 4684 #define WMI_VDEV_STATS_FTM_COUNT_VALID BIT(31) 4685 #define WMI_VDEV_STATS_FTM_COUNT_LSB 0 4686 #define WMI_VDEV_STATS_FTM_COUNT_MASK 0x7fffffff 4687 4688 struct wmi_vdev_stats { 4689 __le32 vdev_id; 4690 } __packed; 4691 4692 struct wmi_vdev_stats_extd { 4693 __le32 vdev_id; 4694 __le32 ppdu_aggr_cnt; 4695 __le32 ppdu_noack; 4696 __le32 mpdu_queued; 4697 __le32 ppdu_nonaggr_cnt; 4698 __le32 mpdu_sw_requeued; 4699 __le32 mpdu_suc_retry; 4700 __le32 mpdu_suc_multitry; 4701 __le32 mpdu_fail_retry; 4702 __le32 tx_ftm_suc; 4703 __le32 tx_ftm_suc_retry; 4704 __le32 tx_ftm_fail; 4705 __le32 rx_ftmr_cnt; 4706 __le32 rx_ftmr_dup_cnt; 4707 __le32 rx_iftmr_cnt; 4708 __le32 rx_iftmr_dup_cnt; 4709 __le32 reserved[6]; 4710 } __packed; 4711 4712 /* 4713 * peer statistics. 4714 * TODO: add more stats 4715 */ 4716 struct wmi_peer_stats { 4717 struct wmi_mac_addr peer_macaddr; 4718 __le32 peer_rssi; 4719 __le32 peer_tx_rate; 4720 } __packed; 4721 4722 struct wmi_10x_peer_stats { 4723 struct wmi_peer_stats old; 4724 __le32 peer_rx_rate; 4725 } __packed; 4726 4727 struct wmi_10_2_peer_stats { 4728 struct wmi_peer_stats old; 4729 __le32 peer_rx_rate; 4730 __le32 current_per; 4731 __le32 retries; 4732 __le32 tx_rate_count; 4733 __le32 max_4ms_frame_len; 4734 __le32 total_sub_frames; 4735 __le32 tx_bytes; 4736 __le32 num_pkt_loss_overflow[4]; 4737 __le32 num_pkt_loss_excess_retry[4]; 4738 } __packed; 4739 4740 struct wmi_10_2_4_peer_stats { 4741 struct wmi_10_2_peer_stats common; 4742 __le32 peer_rssi_changed; 4743 } __packed; 4744 4745 struct wmi_10_2_4_ext_peer_stats { 4746 struct wmi_10_2_peer_stats common; 4747 __le32 peer_rssi_changed; 4748 __le32 rx_duration; 4749 } __packed; 4750 4751 struct wmi_10_4_peer_stats { 4752 struct wmi_mac_addr peer_macaddr; 4753 __le32 peer_rssi; 4754 __le32 peer_rssi_seq_num; 4755 __le32 peer_tx_rate; 4756 __le32 peer_rx_rate; 4757 __le32 current_per; 4758 __le32 retries; 4759 __le32 tx_rate_count; 4760 __le32 max_4ms_frame_len; 4761 __le32 total_sub_frames; 4762 __le32 tx_bytes; 4763 __le32 num_pkt_loss_overflow[4]; 4764 __le32 num_pkt_loss_excess_retry[4]; 4765 __le32 peer_rssi_changed; 4766 } __packed; 4767 4768 struct wmi_10_4_peer_extd_stats { 4769 struct wmi_mac_addr peer_macaddr; 4770 __le32 inactive_time; 4771 __le32 peer_chain_rssi; 4772 __le32 rx_duration; 4773 __le32 reserved[10]; 4774 } __packed; 4775 4776 struct wmi_10_4_bss_bcn_stats { 4777 __le32 vdev_id; 4778 __le32 bss_bcns_dropped; 4779 __le32 bss_bcn_delivered; 4780 } __packed; 4781 4782 struct wmi_10_4_bss_bcn_filter_stats { 4783 __le32 bcns_dropped; 4784 __le32 bcns_delivered; 4785 __le32 active_filters; 4786 struct wmi_10_4_bss_bcn_stats bss_stats; 4787 } __packed; 4788 4789 struct wmi_10_2_pdev_ext_stats { 4790 __le32 rx_rssi_comb; 4791 __le32 rx_rssi[4]; 4792 __le32 rx_mcs[10]; 4793 __le32 tx_mcs[10]; 4794 __le32 ack_rssi; 4795 } __packed; 4796 4797 struct wmi_vdev_create_cmd { 4798 __le32 vdev_id; 4799 __le32 vdev_type; 4800 __le32 vdev_subtype; 4801 struct wmi_mac_addr vdev_macaddr; 4802 } __packed; 4803 4804 enum wmi_vdev_type { 4805 WMI_VDEV_TYPE_AP = 1, 4806 WMI_VDEV_TYPE_STA = 2, 4807 WMI_VDEV_TYPE_IBSS = 3, 4808 WMI_VDEV_TYPE_MONITOR = 4, 4809 }; 4810 4811 enum wmi_vdev_subtype { 4812 WMI_VDEV_SUBTYPE_NONE, 4813 WMI_VDEV_SUBTYPE_P2P_DEVICE, 4814 WMI_VDEV_SUBTYPE_P2P_CLIENT, 4815 WMI_VDEV_SUBTYPE_P2P_GO, 4816 WMI_VDEV_SUBTYPE_PROXY_STA, 4817 WMI_VDEV_SUBTYPE_MESH_11S, 4818 WMI_VDEV_SUBTYPE_MESH_NON_11S, 4819 }; 4820 4821 enum wmi_vdev_subtype_legacy { 4822 WMI_VDEV_SUBTYPE_LEGACY_NONE = 0, 4823 WMI_VDEV_SUBTYPE_LEGACY_P2P_DEV = 1, 4824 WMI_VDEV_SUBTYPE_LEGACY_P2P_CLI = 2, 4825 WMI_VDEV_SUBTYPE_LEGACY_P2P_GO = 3, 4826 WMI_VDEV_SUBTYPE_LEGACY_PROXY_STA = 4, 4827 }; 4828 4829 enum wmi_vdev_subtype_10_2_4 { 4830 WMI_VDEV_SUBTYPE_10_2_4_NONE = 0, 4831 WMI_VDEV_SUBTYPE_10_2_4_P2P_DEV = 1, 4832 WMI_VDEV_SUBTYPE_10_2_4_P2P_CLI = 2, 4833 WMI_VDEV_SUBTYPE_10_2_4_P2P_GO = 3, 4834 WMI_VDEV_SUBTYPE_10_2_4_PROXY_STA = 4, 4835 WMI_VDEV_SUBTYPE_10_2_4_MESH_11S = 5, 4836 }; 4837 4838 enum wmi_vdev_subtype_10_4 { 4839 WMI_VDEV_SUBTYPE_10_4_NONE = 0, 4840 WMI_VDEV_SUBTYPE_10_4_P2P_DEV = 1, 4841 WMI_VDEV_SUBTYPE_10_4_P2P_CLI = 2, 4842 WMI_VDEV_SUBTYPE_10_4_P2P_GO = 3, 4843 WMI_VDEV_SUBTYPE_10_4_PROXY_STA = 4, 4844 WMI_VDEV_SUBTYPE_10_4_MESH_NON_11S = 5, 4845 WMI_VDEV_SUBTYPE_10_4_MESH_11S = 6, 4846 }; 4847 4848 /* values for vdev_subtype */ 4849 4850 /* values for vdev_start_request flags */ 4851 /* 4852 * Indicates that AP VDEV uses hidden ssid. only valid for 4853 * AP/GO 4854 */ 4855 #define WMI_VDEV_START_HIDDEN_SSID (1 << 0) 4856 /* 4857 * Indicates if robust management frame/management frame 4858 * protection is enabled. For GO/AP vdevs, it indicates that 4859 * it may support station/client associations with RMF enabled. 4860 * For STA/client vdevs, it indicates that sta will 4861 * associate with AP with RMF enabled. 4862 */ 4863 #define WMI_VDEV_START_PMF_ENABLED (1 << 1) 4864 4865 struct wmi_p2p_noa_descriptor { 4866 __le32 type_count; /* 255: continuous schedule, 0: reserved */ 4867 __le32 duration; /* Absent period duration in micro seconds */ 4868 __le32 interval; /* Absent period interval in micro seconds */ 4869 __le32 start_time; /* 32 bit tsf time when in starts */ 4870 } __packed; 4871 4872 struct wmi_vdev_start_request_cmd { 4873 /* WMI channel */ 4874 struct wmi_channel chan; 4875 /* unique id identifying the VDEV, generated by the caller */ 4876 __le32 vdev_id; 4877 /* requestor id identifying the caller module */ 4878 __le32 requestor_id; 4879 /* beacon interval from received beacon */ 4880 __le32 beacon_interval; 4881 /* DTIM Period from the received beacon */ 4882 __le32 dtim_period; 4883 /* Flags */ 4884 __le32 flags; 4885 /* ssid field. Only valid for AP/GO/IBSS/BTAmp VDEV type. */ 4886 struct wmi_ssid ssid; 4887 /* beacon/probe response xmit rate. Applicable for SoftAP. */ 4888 __le32 bcn_tx_rate; 4889 /* beacon/probe response xmit power. Applicable for SoftAP. */ 4890 __le32 bcn_tx_power; 4891 /* number of p2p NOA descriptor(s) from scan entry */ 4892 __le32 num_noa_descriptors; 4893 /* 4894 * Disable H/W ack. This used by WMI_VDEV_RESTART_REQUEST_CMDID. 4895 * During CAC, Our HW shouldn't ack ditected frames 4896 */ 4897 __le32 disable_hw_ack; 4898 /* actual p2p NOA descriptor from scan entry */ 4899 struct wmi_p2p_noa_descriptor noa_descriptors[2]; 4900 } __packed; 4901 4902 struct wmi_vdev_restart_request_cmd { 4903 struct wmi_vdev_start_request_cmd vdev_start_request_cmd; 4904 } __packed; 4905 4906 struct wmi_vdev_start_request_arg { 4907 u32 vdev_id; 4908 struct wmi_channel_arg channel; 4909 u32 bcn_intval; 4910 u32 dtim_period; 4911 u8 *ssid; 4912 u32 ssid_len; 4913 u32 bcn_tx_rate; 4914 u32 bcn_tx_power; 4915 bool disable_hw_ack; 4916 bool hidden_ssid; 4917 bool pmf_enabled; 4918 }; 4919 4920 struct wmi_vdev_delete_cmd { 4921 /* unique id identifying the VDEV, generated by the caller */ 4922 __le32 vdev_id; 4923 } __packed; 4924 4925 struct wmi_vdev_up_cmd { 4926 __le32 vdev_id; 4927 __le32 vdev_assoc_id; 4928 struct wmi_mac_addr vdev_bssid; 4929 } __packed; 4930 4931 struct wmi_vdev_stop_cmd { 4932 __le32 vdev_id; 4933 } __packed; 4934 4935 struct wmi_vdev_down_cmd { 4936 __le32 vdev_id; 4937 } __packed; 4938 4939 struct wmi_vdev_standby_response_cmd { 4940 /* unique id identifying the VDEV, generated by the caller */ 4941 __le32 vdev_id; 4942 } __packed; 4943 4944 struct wmi_vdev_resume_response_cmd { 4945 /* unique id identifying the VDEV, generated by the caller */ 4946 __le32 vdev_id; 4947 } __packed; 4948 4949 struct wmi_vdev_set_param_cmd { 4950 __le32 vdev_id; 4951 __le32 param_id; 4952 __le32 param_value; 4953 } __packed; 4954 4955 #define WMI_MAX_KEY_INDEX 3 4956 #define WMI_MAX_KEY_LEN 32 4957 4958 #define WMI_KEY_PAIRWISE 0x00 4959 #define WMI_KEY_GROUP 0x01 4960 #define WMI_KEY_TX_USAGE 0x02 /* default tx key - static wep */ 4961 4962 struct wmi_key_seq_counter { 4963 __le32 key_seq_counter_l; 4964 __le32 key_seq_counter_h; 4965 } __packed; 4966 4967 enum wmi_cipher_suites { 4968 WMI_CIPHER_NONE, 4969 WMI_CIPHER_WEP, 4970 WMI_CIPHER_TKIP, 4971 WMI_CIPHER_AES_OCB, 4972 WMI_CIPHER_AES_CCM, 4973 WMI_CIPHER_WAPI, 4974 WMI_CIPHER_CKIP, 4975 WMI_CIPHER_AES_CMAC, 4976 WMI_CIPHER_AES_GCM, 4977 }; 4978 4979 enum wmi_tlv_cipher_suites { 4980 WMI_TLV_CIPHER_NONE, 4981 WMI_TLV_CIPHER_WEP, 4982 WMI_TLV_CIPHER_TKIP, 4983 WMI_TLV_CIPHER_AES_OCB, 4984 WMI_TLV_CIPHER_AES_CCM, 4985 WMI_TLV_CIPHER_WAPI, 4986 WMI_TLV_CIPHER_CKIP, 4987 WMI_TLV_CIPHER_AES_CMAC, 4988 WMI_TLV_CIPHER_ANY, 4989 WMI_TLV_CIPHER_AES_GCM, 4990 }; 4991 4992 struct wmi_vdev_install_key_cmd { 4993 __le32 vdev_id; 4994 struct wmi_mac_addr peer_macaddr; 4995 __le32 key_idx; 4996 __le32 key_flags; 4997 __le32 key_cipher; /* %WMI_CIPHER_ */ 4998 struct wmi_key_seq_counter key_rsc_counter; 4999 struct wmi_key_seq_counter key_global_rsc_counter; 5000 struct wmi_key_seq_counter key_tsc_counter; 5001 u8 wpi_key_rsc_counter[16]; 5002 u8 wpi_key_tsc_counter[16]; 5003 __le32 key_len; 5004 __le32 key_txmic_len; 5005 __le32 key_rxmic_len; 5006 5007 /* contains key followed by tx mic followed by rx mic */ 5008 u8 key_data[0]; 5009 } __packed; 5010 5011 struct wmi_vdev_install_key_arg { 5012 u32 vdev_id; 5013 const u8 *macaddr; 5014 u32 key_idx; 5015 u32 key_flags; 5016 u32 key_cipher; 5017 u32 key_len; 5018 u32 key_txmic_len; 5019 u32 key_rxmic_len; 5020 const void *key_data; 5021 }; 5022 5023 /* 5024 * vdev fixed rate format: 5025 * - preamble - b7:b6 - see WMI_RATE_PREMABLE_ 5026 * - nss - b5:b4 - ss number (0 mean 1ss) 5027 * - rate_mcs - b3:b0 - as below 5028 * CCK: 0 - 11Mbps, 1 - 5,5Mbps, 2 - 2Mbps, 3 - 1Mbps, 5029 * 4 - 11Mbps (s), 5 - 5,5Mbps (s), 6 - 2Mbps (s) 5030 * OFDM: 0 - 48Mbps, 1 - 24Mbps, 2 - 12Mbps, 3 - 6Mbps, 5031 * 4 - 54Mbps, 5 - 36Mbps, 6 - 18Mbps, 7 - 9Mbps 5032 * HT/VHT: MCS index 5033 */ 5034 5035 /* Preamble types to be used with VDEV fixed rate configuration */ 5036 enum wmi_rate_preamble { 5037 WMI_RATE_PREAMBLE_OFDM, 5038 WMI_RATE_PREAMBLE_CCK, 5039 WMI_RATE_PREAMBLE_HT, 5040 WMI_RATE_PREAMBLE_VHT, 5041 }; 5042 5043 #define ATH10K_HW_NSS(rate) (1 + (((rate) >> 4) & 0x3)) 5044 #define ATH10K_HW_PREAMBLE(rate) (((rate) >> 6) & 0x3) 5045 #define ATH10K_HW_MCS_RATE(rate) ((rate) & 0xf) 5046 #define ATH10K_HW_LEGACY_RATE(rate) ((rate) & 0x3f) 5047 #define ATH10K_HW_BW(flags) (((flags) >> 3) & 0x3) 5048 #define ATH10K_HW_GI(flags) (((flags) >> 5) & 0x1) 5049 #define ATH10K_HW_RATECODE(rate, nss, preamble) \ 5050 (((preamble) << 6) | ((nss) << 4) | (rate)) 5051 #define ATH10K_HW_AMPDU(flags) ((flags) & 0x1) 5052 #define ATH10K_HW_BA_FAIL(flags) (((flags) >> 1) & 0x3) 5053 #define ATH10K_FW_SKIPPED_RATE_CTRL(flags) (((flags) >> 6) & 0x1) 5054 5055 #define ATH10K_VHT_MCS_NUM 10 5056 #define ATH10K_BW_NUM 6 5057 #define ATH10K_NSS_NUM 4 5058 #define ATH10K_LEGACY_NUM 12 5059 #define ATH10K_GI_NUM 2 5060 #define ATH10K_HT_MCS_NUM 32 5061 #define ATH10K_RATE_TABLE_NUM 320 5062 #define ATH10K_RATE_INFO_FLAGS_SGI_BIT 2 5063 5064 /* Value to disable fixed rate setting */ 5065 #define WMI_FIXED_RATE_NONE (0xff) 5066 5067 struct wmi_vdev_param_map { 5068 u32 rts_threshold; 5069 u32 fragmentation_threshold; 5070 u32 beacon_interval; 5071 u32 listen_interval; 5072 u32 multicast_rate; 5073 u32 mgmt_tx_rate; 5074 u32 slot_time; 5075 u32 preamble; 5076 u32 swba_time; 5077 u32 wmi_vdev_stats_update_period; 5078 u32 wmi_vdev_pwrsave_ageout_time; 5079 u32 wmi_vdev_host_swba_interval; 5080 u32 dtim_period; 5081 u32 wmi_vdev_oc_scheduler_air_time_limit; 5082 u32 wds; 5083 u32 atim_window; 5084 u32 bmiss_count_max; 5085 u32 bmiss_first_bcnt; 5086 u32 bmiss_final_bcnt; 5087 u32 feature_wmm; 5088 u32 chwidth; 5089 u32 chextoffset; 5090 u32 disable_htprotection; 5091 u32 sta_quickkickout; 5092 u32 mgmt_rate; 5093 u32 protection_mode; 5094 u32 fixed_rate; 5095 u32 sgi; 5096 u32 ldpc; 5097 u32 tx_stbc; 5098 u32 rx_stbc; 5099 u32 intra_bss_fwd; 5100 u32 def_keyid; 5101 u32 nss; 5102 u32 bcast_data_rate; 5103 u32 mcast_data_rate; 5104 u32 mcast_indicate; 5105 u32 dhcp_indicate; 5106 u32 unknown_dest_indicate; 5107 u32 ap_keepalive_min_idle_inactive_time_secs; 5108 u32 ap_keepalive_max_idle_inactive_time_secs; 5109 u32 ap_keepalive_max_unresponsive_time_secs; 5110 u32 ap_enable_nawds; 5111 u32 mcast2ucast_set; 5112 u32 enable_rtscts; 5113 u32 txbf; 5114 u32 packet_powersave; 5115 u32 drop_unencry; 5116 u32 tx_encap_type; 5117 u32 ap_detect_out_of_sync_sleeping_sta_time_secs; 5118 u32 rc_num_retries; 5119 u32 cabq_maxdur; 5120 u32 mfptest_set; 5121 u32 rts_fixed_rate; 5122 u32 vht_sgimask; 5123 u32 vht80_ratemask; 5124 u32 early_rx_adjust_enable; 5125 u32 early_rx_tgt_bmiss_num; 5126 u32 early_rx_bmiss_sample_cycle; 5127 u32 early_rx_slop_step; 5128 u32 early_rx_init_slop; 5129 u32 early_rx_adjust_pause; 5130 u32 proxy_sta; 5131 u32 meru_vc; 5132 u32 rx_decap_type; 5133 u32 bw_nss_ratemask; 5134 u32 inc_tsf; 5135 u32 dec_tsf; 5136 u32 disable_4addr_src_lrn; 5137 u32 rtt_responder_role; 5138 }; 5139 5140 #define WMI_VDEV_PARAM_UNSUPPORTED 0 5141 5142 /* the definition of different VDEV parameters */ 5143 enum wmi_vdev_param { 5144 /* RTS Threshold */ 5145 WMI_VDEV_PARAM_RTS_THRESHOLD = 0x1, 5146 /* Fragmentation threshold */ 5147 WMI_VDEV_PARAM_FRAGMENTATION_THRESHOLD, 5148 /* beacon interval in TUs */ 5149 WMI_VDEV_PARAM_BEACON_INTERVAL, 5150 /* Listen interval in TUs */ 5151 WMI_VDEV_PARAM_LISTEN_INTERVAL, 5152 /* multicast rate in Mbps */ 5153 WMI_VDEV_PARAM_MULTICAST_RATE, 5154 /* management frame rate in Mbps */ 5155 WMI_VDEV_PARAM_MGMT_TX_RATE, 5156 /* slot time (long vs short) */ 5157 WMI_VDEV_PARAM_SLOT_TIME, 5158 /* preamble (long vs short) */ 5159 WMI_VDEV_PARAM_PREAMBLE, 5160 /* SWBA time (time before tbtt in msec) */ 5161 WMI_VDEV_PARAM_SWBA_TIME, 5162 /* time period for updating VDEV stats */ 5163 WMI_VDEV_STATS_UPDATE_PERIOD, 5164 /* age out time in msec for frames queued for station in power save */ 5165 WMI_VDEV_PWRSAVE_AGEOUT_TIME, 5166 /* 5167 * Host SWBA interval (time in msec before tbtt for SWBA event 5168 * generation). 5169 */ 5170 WMI_VDEV_HOST_SWBA_INTERVAL, 5171 /* DTIM period (specified in units of num beacon intervals) */ 5172 WMI_VDEV_PARAM_DTIM_PERIOD, 5173 /* 5174 * scheduler air time limit for this VDEV. used by off chan 5175 * scheduler. 5176 */ 5177 WMI_VDEV_OC_SCHEDULER_AIR_TIME_LIMIT, 5178 /* enable/dsiable WDS for this VDEV */ 5179 WMI_VDEV_PARAM_WDS, 5180 /* ATIM Window */ 5181 WMI_VDEV_PARAM_ATIM_WINDOW, 5182 /* BMISS max */ 5183 WMI_VDEV_PARAM_BMISS_COUNT_MAX, 5184 /* BMISS first time */ 5185 WMI_VDEV_PARAM_BMISS_FIRST_BCNT, 5186 /* BMISS final time */ 5187 WMI_VDEV_PARAM_BMISS_FINAL_BCNT, 5188 /* WMM enables/disabled */ 5189 WMI_VDEV_PARAM_FEATURE_WMM, 5190 /* Channel width */ 5191 WMI_VDEV_PARAM_CHWIDTH, 5192 /* Channel Offset */ 5193 WMI_VDEV_PARAM_CHEXTOFFSET, 5194 /* Disable HT Protection */ 5195 WMI_VDEV_PARAM_DISABLE_HTPROTECTION, 5196 /* Quick STA Kickout */ 5197 WMI_VDEV_PARAM_STA_QUICKKICKOUT, 5198 /* Rate to be used with Management frames */ 5199 WMI_VDEV_PARAM_MGMT_RATE, 5200 /* Protection Mode */ 5201 WMI_VDEV_PARAM_PROTECTION_MODE, 5202 /* Fixed rate setting */ 5203 WMI_VDEV_PARAM_FIXED_RATE, 5204 /* Short GI Enable/Disable */ 5205 WMI_VDEV_PARAM_SGI, 5206 /* Enable LDPC */ 5207 WMI_VDEV_PARAM_LDPC, 5208 /* Enable Tx STBC */ 5209 WMI_VDEV_PARAM_TX_STBC, 5210 /* Enable Rx STBC */ 5211 WMI_VDEV_PARAM_RX_STBC, 5212 /* Intra BSS forwarding */ 5213 WMI_VDEV_PARAM_INTRA_BSS_FWD, 5214 /* Setting Default xmit key for Vdev */ 5215 WMI_VDEV_PARAM_DEF_KEYID, 5216 /* NSS width */ 5217 WMI_VDEV_PARAM_NSS, 5218 /* Set the custom rate for the broadcast data frames */ 5219 WMI_VDEV_PARAM_BCAST_DATA_RATE, 5220 /* Set the custom rate (rate-code) for multicast data frames */ 5221 WMI_VDEV_PARAM_MCAST_DATA_RATE, 5222 /* Tx multicast packet indicate Enable/Disable */ 5223 WMI_VDEV_PARAM_MCAST_INDICATE, 5224 /* Tx DHCP packet indicate Enable/Disable */ 5225 WMI_VDEV_PARAM_DHCP_INDICATE, 5226 /* Enable host inspection of Tx unicast packet to unknown destination */ 5227 WMI_VDEV_PARAM_UNKNOWN_DEST_INDICATE, 5228 5229 /* The minimum amount of time AP begins to consider STA inactive */ 5230 WMI_VDEV_PARAM_AP_KEEPALIVE_MIN_IDLE_INACTIVE_TIME_SECS, 5231 5232 /* 5233 * An associated STA is considered inactive when there is no recent 5234 * TX/RX activity and no downlink frames are buffered for it. Once a 5235 * STA exceeds the maximum idle inactive time, the AP will send an 5236 * 802.11 data-null as a keep alive to verify the STA is still 5237 * associated. If the STA does ACK the data-null, or if the data-null 5238 * is buffered and the STA does not retrieve it, the STA will be 5239 * considered unresponsive 5240 * (see WMI_VDEV_AP_KEEPALIVE_MAX_UNRESPONSIVE_TIME_SECS). 5241 */ 5242 WMI_VDEV_PARAM_AP_KEEPALIVE_MAX_IDLE_INACTIVE_TIME_SECS, 5243 5244 /* 5245 * An associated STA is considered unresponsive if there is no recent 5246 * TX/RX activity and downlink frames are buffered for it. Once a STA 5247 * exceeds the maximum unresponsive time, the AP will send a 5248 * WMI_STA_KICKOUT event to the host so the STA can be deleted. 5249 */ 5250 WMI_VDEV_PARAM_AP_KEEPALIVE_MAX_UNRESPONSIVE_TIME_SECS, 5251 5252 /* Enable NAWDS : MCAST INSPECT Enable, NAWDS Flag set */ 5253 WMI_VDEV_PARAM_AP_ENABLE_NAWDS, 5254 /* Enable/Disable RTS-CTS */ 5255 WMI_VDEV_PARAM_ENABLE_RTSCTS, 5256 /* Enable TXBFee/er */ 5257 WMI_VDEV_PARAM_TXBF, 5258 5259 /* Set packet power save */ 5260 WMI_VDEV_PARAM_PACKET_POWERSAVE, 5261 5262 /* 5263 * Drops un-encrypted packets if eceived in an encrypted connection 5264 * otherwise forwards to host. 5265 */ 5266 WMI_VDEV_PARAM_DROP_UNENCRY, 5267 5268 /* 5269 * Set the encapsulation type for frames. 5270 */ 5271 WMI_VDEV_PARAM_TX_ENCAP_TYPE, 5272 }; 5273 5274 /* the definition of different VDEV parameters */ 5275 enum wmi_10x_vdev_param { 5276 /* RTS Threshold */ 5277 WMI_10X_VDEV_PARAM_RTS_THRESHOLD = 0x1, 5278 /* Fragmentation threshold */ 5279 WMI_10X_VDEV_PARAM_FRAGMENTATION_THRESHOLD, 5280 /* beacon interval in TUs */ 5281 WMI_10X_VDEV_PARAM_BEACON_INTERVAL, 5282 /* Listen interval in TUs */ 5283 WMI_10X_VDEV_PARAM_LISTEN_INTERVAL, 5284 /* multicast rate in Mbps */ 5285 WMI_10X_VDEV_PARAM_MULTICAST_RATE, 5286 /* management frame rate in Mbps */ 5287 WMI_10X_VDEV_PARAM_MGMT_TX_RATE, 5288 /* slot time (long vs short) */ 5289 WMI_10X_VDEV_PARAM_SLOT_TIME, 5290 /* preamble (long vs short) */ 5291 WMI_10X_VDEV_PARAM_PREAMBLE, 5292 /* SWBA time (time before tbtt in msec) */ 5293 WMI_10X_VDEV_PARAM_SWBA_TIME, 5294 /* time period for updating VDEV stats */ 5295 WMI_10X_VDEV_STATS_UPDATE_PERIOD, 5296 /* age out time in msec for frames queued for station in power save */ 5297 WMI_10X_VDEV_PWRSAVE_AGEOUT_TIME, 5298 /* 5299 * Host SWBA interval (time in msec before tbtt for SWBA event 5300 * generation). 5301 */ 5302 WMI_10X_VDEV_HOST_SWBA_INTERVAL, 5303 /* DTIM period (specified in units of num beacon intervals) */ 5304 WMI_10X_VDEV_PARAM_DTIM_PERIOD, 5305 /* 5306 * scheduler air time limit for this VDEV. used by off chan 5307 * scheduler. 5308 */ 5309 WMI_10X_VDEV_OC_SCHEDULER_AIR_TIME_LIMIT, 5310 /* enable/dsiable WDS for this VDEV */ 5311 WMI_10X_VDEV_PARAM_WDS, 5312 /* ATIM Window */ 5313 WMI_10X_VDEV_PARAM_ATIM_WINDOW, 5314 /* BMISS max */ 5315 WMI_10X_VDEV_PARAM_BMISS_COUNT_MAX, 5316 /* WMM enables/disabled */ 5317 WMI_10X_VDEV_PARAM_FEATURE_WMM, 5318 /* Channel width */ 5319 WMI_10X_VDEV_PARAM_CHWIDTH, 5320 /* Channel Offset */ 5321 WMI_10X_VDEV_PARAM_CHEXTOFFSET, 5322 /* Disable HT Protection */ 5323 WMI_10X_VDEV_PARAM_DISABLE_HTPROTECTION, 5324 /* Quick STA Kickout */ 5325 WMI_10X_VDEV_PARAM_STA_QUICKKICKOUT, 5326 /* Rate to be used with Management frames */ 5327 WMI_10X_VDEV_PARAM_MGMT_RATE, 5328 /* Protection Mode */ 5329 WMI_10X_VDEV_PARAM_PROTECTION_MODE, 5330 /* Fixed rate setting */ 5331 WMI_10X_VDEV_PARAM_FIXED_RATE, 5332 /* Short GI Enable/Disable */ 5333 WMI_10X_VDEV_PARAM_SGI, 5334 /* Enable LDPC */ 5335 WMI_10X_VDEV_PARAM_LDPC, 5336 /* Enable Tx STBC */ 5337 WMI_10X_VDEV_PARAM_TX_STBC, 5338 /* Enable Rx STBC */ 5339 WMI_10X_VDEV_PARAM_RX_STBC, 5340 /* Intra BSS forwarding */ 5341 WMI_10X_VDEV_PARAM_INTRA_BSS_FWD, 5342 /* Setting Default xmit key for Vdev */ 5343 WMI_10X_VDEV_PARAM_DEF_KEYID, 5344 /* NSS width */ 5345 WMI_10X_VDEV_PARAM_NSS, 5346 /* Set the custom rate for the broadcast data frames */ 5347 WMI_10X_VDEV_PARAM_BCAST_DATA_RATE, 5348 /* Set the custom rate (rate-code) for multicast data frames */ 5349 WMI_10X_VDEV_PARAM_MCAST_DATA_RATE, 5350 /* Tx multicast packet indicate Enable/Disable */ 5351 WMI_10X_VDEV_PARAM_MCAST_INDICATE, 5352 /* Tx DHCP packet indicate Enable/Disable */ 5353 WMI_10X_VDEV_PARAM_DHCP_INDICATE, 5354 /* Enable host inspection of Tx unicast packet to unknown destination */ 5355 WMI_10X_VDEV_PARAM_UNKNOWN_DEST_INDICATE, 5356 5357 /* The minimum amount of time AP begins to consider STA inactive */ 5358 WMI_10X_VDEV_PARAM_AP_KEEPALIVE_MIN_IDLE_INACTIVE_TIME_SECS, 5359 5360 /* 5361 * An associated STA is considered inactive when there is no recent 5362 * TX/RX activity and no downlink frames are buffered for it. Once a 5363 * STA exceeds the maximum idle inactive time, the AP will send an 5364 * 802.11 data-null as a keep alive to verify the STA is still 5365 * associated. If the STA does ACK the data-null, or if the data-null 5366 * is buffered and the STA does not retrieve it, the STA will be 5367 * considered unresponsive 5368 * (see WMI_10X_VDEV_AP_KEEPALIVE_MAX_UNRESPONSIVE_TIME_SECS). 5369 */ 5370 WMI_10X_VDEV_PARAM_AP_KEEPALIVE_MAX_IDLE_INACTIVE_TIME_SECS, 5371 5372 /* 5373 * An associated STA is considered unresponsive if there is no recent 5374 * TX/RX activity and downlink frames are buffered for it. Once a STA 5375 * exceeds the maximum unresponsive time, the AP will send a 5376 * WMI_10X_STA_KICKOUT event to the host so the STA can be deleted. 5377 */ 5378 WMI_10X_VDEV_PARAM_AP_KEEPALIVE_MAX_UNRESPONSIVE_TIME_SECS, 5379 5380 /* Enable NAWDS : MCAST INSPECT Enable, NAWDS Flag set */ 5381 WMI_10X_VDEV_PARAM_AP_ENABLE_NAWDS, 5382 5383 WMI_10X_VDEV_PARAM_MCAST2UCAST_SET, 5384 /* Enable/Disable RTS-CTS */ 5385 WMI_10X_VDEV_PARAM_ENABLE_RTSCTS, 5386 5387 WMI_10X_VDEV_PARAM_AP_DETECT_OUT_OF_SYNC_SLEEPING_STA_TIME_SECS, 5388 5389 /* following are available as of firmware 10.2 */ 5390 WMI_10X_VDEV_PARAM_TX_ENCAP_TYPE, 5391 WMI_10X_VDEV_PARAM_CABQ_MAXDUR, 5392 WMI_10X_VDEV_PARAM_MFPTEST_SET, 5393 WMI_10X_VDEV_PARAM_RTS_FIXED_RATE, 5394 WMI_10X_VDEV_PARAM_VHT_SGIMASK, 5395 WMI_10X_VDEV_PARAM_VHT80_RATEMASK, 5396 WMI_10X_VDEV_PARAM_TSF_INCREMENT, 5397 }; 5398 5399 enum wmi_10_4_vdev_param { 5400 WMI_10_4_VDEV_PARAM_RTS_THRESHOLD = 0x1, 5401 WMI_10_4_VDEV_PARAM_FRAGMENTATION_THRESHOLD, 5402 WMI_10_4_VDEV_PARAM_BEACON_INTERVAL, 5403 WMI_10_4_VDEV_PARAM_LISTEN_INTERVAL, 5404 WMI_10_4_VDEV_PARAM_MULTICAST_RATE, 5405 WMI_10_4_VDEV_PARAM_MGMT_TX_RATE, 5406 WMI_10_4_VDEV_PARAM_SLOT_TIME, 5407 WMI_10_4_VDEV_PARAM_PREAMBLE, 5408 WMI_10_4_VDEV_PARAM_SWBA_TIME, 5409 WMI_10_4_VDEV_STATS_UPDATE_PERIOD, 5410 WMI_10_4_VDEV_PWRSAVE_AGEOUT_TIME, 5411 WMI_10_4_VDEV_HOST_SWBA_INTERVAL, 5412 WMI_10_4_VDEV_PARAM_DTIM_PERIOD, 5413 WMI_10_4_VDEV_OC_SCHEDULER_AIR_TIME_LIMIT, 5414 WMI_10_4_VDEV_PARAM_WDS, 5415 WMI_10_4_VDEV_PARAM_ATIM_WINDOW, 5416 WMI_10_4_VDEV_PARAM_BMISS_COUNT_MAX, 5417 WMI_10_4_VDEV_PARAM_BMISS_FIRST_BCNT, 5418 WMI_10_4_VDEV_PARAM_BMISS_FINAL_BCNT, 5419 WMI_10_4_VDEV_PARAM_FEATURE_WMM, 5420 WMI_10_4_VDEV_PARAM_CHWIDTH, 5421 WMI_10_4_VDEV_PARAM_CHEXTOFFSET, 5422 WMI_10_4_VDEV_PARAM_DISABLE_HTPROTECTION, 5423 WMI_10_4_VDEV_PARAM_STA_QUICKKICKOUT, 5424 WMI_10_4_VDEV_PARAM_MGMT_RATE, 5425 WMI_10_4_VDEV_PARAM_PROTECTION_MODE, 5426 WMI_10_4_VDEV_PARAM_FIXED_RATE, 5427 WMI_10_4_VDEV_PARAM_SGI, 5428 WMI_10_4_VDEV_PARAM_LDPC, 5429 WMI_10_4_VDEV_PARAM_TX_STBC, 5430 WMI_10_4_VDEV_PARAM_RX_STBC, 5431 WMI_10_4_VDEV_PARAM_INTRA_BSS_FWD, 5432 WMI_10_4_VDEV_PARAM_DEF_KEYID, 5433 WMI_10_4_VDEV_PARAM_NSS, 5434 WMI_10_4_VDEV_PARAM_BCAST_DATA_RATE, 5435 WMI_10_4_VDEV_PARAM_MCAST_DATA_RATE, 5436 WMI_10_4_VDEV_PARAM_MCAST_INDICATE, 5437 WMI_10_4_VDEV_PARAM_DHCP_INDICATE, 5438 WMI_10_4_VDEV_PARAM_UNKNOWN_DEST_INDICATE, 5439 WMI_10_4_VDEV_PARAM_AP_KEEPALIVE_MIN_IDLE_INACTIVE_TIME_SECS, 5440 WMI_10_4_VDEV_PARAM_AP_KEEPALIVE_MAX_IDLE_INACTIVE_TIME_SECS, 5441 WMI_10_4_VDEV_PARAM_AP_KEEPALIVE_MAX_UNRESPONSIVE_TIME_SECS, 5442 WMI_10_4_VDEV_PARAM_AP_ENABLE_NAWDS, 5443 WMI_10_4_VDEV_PARAM_MCAST2UCAST_SET, 5444 WMI_10_4_VDEV_PARAM_ENABLE_RTSCTS, 5445 WMI_10_4_VDEV_PARAM_RC_NUM_RETRIES, 5446 WMI_10_4_VDEV_PARAM_TXBF, 5447 WMI_10_4_VDEV_PARAM_PACKET_POWERSAVE, 5448 WMI_10_4_VDEV_PARAM_DROP_UNENCRY, 5449 WMI_10_4_VDEV_PARAM_TX_ENCAP_TYPE, 5450 WMI_10_4_VDEV_PARAM_AP_DETECT_OUT_OF_SYNC_SLEEPING_STA_TIME_SECS, 5451 WMI_10_4_VDEV_PARAM_CABQ_MAXDUR, 5452 WMI_10_4_VDEV_PARAM_MFPTEST_SET, 5453 WMI_10_4_VDEV_PARAM_RTS_FIXED_RATE, 5454 WMI_10_4_VDEV_PARAM_VHT_SGIMASK, 5455 WMI_10_4_VDEV_PARAM_VHT80_RATEMASK, 5456 WMI_10_4_VDEV_PARAM_EARLY_RX_ADJUST_ENABLE, 5457 WMI_10_4_VDEV_PARAM_EARLY_RX_TGT_BMISS_NUM, 5458 WMI_10_4_VDEV_PARAM_EARLY_RX_BMISS_SAMPLE_CYCLE, 5459 WMI_10_4_VDEV_PARAM_EARLY_RX_SLOP_STEP, 5460 WMI_10_4_VDEV_PARAM_EARLY_RX_INIT_SLOP, 5461 WMI_10_4_VDEV_PARAM_EARLY_RX_ADJUST_PAUSE, 5462 WMI_10_4_VDEV_PARAM_PROXY_STA, 5463 WMI_10_4_VDEV_PARAM_MERU_VC, 5464 WMI_10_4_VDEV_PARAM_RX_DECAP_TYPE, 5465 WMI_10_4_VDEV_PARAM_BW_NSS_RATEMASK, 5466 WMI_10_4_VDEV_PARAM_SENSOR_AP, 5467 WMI_10_4_VDEV_PARAM_BEACON_RATE, 5468 WMI_10_4_VDEV_PARAM_DTIM_ENABLE_CTS, 5469 WMI_10_4_VDEV_PARAM_STA_KICKOUT, 5470 WMI_10_4_VDEV_PARAM_CAPABILITIES, 5471 WMI_10_4_VDEV_PARAM_TSF_INCREMENT, 5472 WMI_10_4_VDEV_PARAM_RX_FILTER, 5473 WMI_10_4_VDEV_PARAM_MGMT_TX_POWER, 5474 WMI_10_4_VDEV_PARAM_ATF_SSID_SCHED_POLICY, 5475 WMI_10_4_VDEV_PARAM_DISABLE_DYN_BW_RTS, 5476 WMI_10_4_VDEV_PARAM_TSF_DECREMENT, 5477 WMI_10_4_VDEV_PARAM_SELFGEN_FIXED_RATE, 5478 WMI_10_4_VDEV_PARAM_AMPDU_SUBFRAME_SIZE_PER_AC, 5479 WMI_10_4_VDEV_PARAM_NSS_VHT160, 5480 WMI_10_4_VDEV_PARAM_NSS_VHT80_80, 5481 WMI_10_4_VDEV_PARAM_AMSDU_SUBFRAME_SIZE_PER_AC, 5482 WMI_10_4_VDEV_PARAM_DISABLE_CABQ, 5483 WMI_10_4_VDEV_PARAM_SIFS_TRIGGER_RATE, 5484 WMI_10_4_VDEV_PARAM_TX_POWER, 5485 WMI_10_4_VDEV_PARAM_ENABLE_DISABLE_RTT_RESPONDER_ROLE, 5486 WMI_10_4_VDEV_PARAM_DISABLE_4_ADDR_SRC_LRN, 5487 }; 5488 5489 #define WMI_VDEV_DISABLE_4_ADDR_SRC_LRN 1 5490 5491 #define WMI_VDEV_PARAM_TXBF_SU_TX_BFEE BIT(0) 5492 #define WMI_VDEV_PARAM_TXBF_MU_TX_BFEE BIT(1) 5493 #define WMI_VDEV_PARAM_TXBF_SU_TX_BFER BIT(2) 5494 #define WMI_VDEV_PARAM_TXBF_MU_TX_BFER BIT(3) 5495 5496 #define WMI_TXBF_STS_CAP_OFFSET_LSB 4 5497 #define WMI_TXBF_STS_CAP_OFFSET_MASK 0x70 5498 #define WMI_TXBF_CONF_IMPLICIT_BF BIT(7) 5499 #define WMI_BF_SOUND_DIM_OFFSET_LSB 8 5500 #define WMI_BF_SOUND_DIM_OFFSET_MASK 0xf00 5501 5502 /* slot time long */ 5503 #define WMI_VDEV_SLOT_TIME_LONG 0x1 5504 /* slot time short */ 5505 #define WMI_VDEV_SLOT_TIME_SHORT 0x2 5506 /* preablbe long */ 5507 #define WMI_VDEV_PREAMBLE_LONG 0x1 5508 /* preablbe short */ 5509 #define WMI_VDEV_PREAMBLE_SHORT 0x2 5510 5511 enum wmi_start_event_param { 5512 WMI_VDEV_RESP_START_EVENT = 0, 5513 WMI_VDEV_RESP_RESTART_EVENT, 5514 }; 5515 5516 struct wmi_vdev_start_response_event { 5517 __le32 vdev_id; 5518 __le32 req_id; 5519 __le32 resp_type; /* %WMI_VDEV_RESP_ */ 5520 __le32 status; 5521 } __packed; 5522 5523 struct wmi_vdev_standby_req_event { 5524 /* unique id identifying the VDEV, generated by the caller */ 5525 __le32 vdev_id; 5526 } __packed; 5527 5528 struct wmi_vdev_resume_req_event { 5529 /* unique id identifying the VDEV, generated by the caller */ 5530 __le32 vdev_id; 5531 } __packed; 5532 5533 struct wmi_vdev_stopped_event { 5534 /* unique id identifying the VDEV, generated by the caller */ 5535 __le32 vdev_id; 5536 } __packed; 5537 5538 /* 5539 * common structure used for simple events 5540 * (stopped, resume_req, standby response) 5541 */ 5542 struct wmi_vdev_simple_event { 5543 /* unique id identifying the VDEV, generated by the caller */ 5544 __le32 vdev_id; 5545 } __packed; 5546 5547 /* VDEV start response status codes */ 5548 /* VDEV successfully started */ 5549 #define WMI_INIFIED_VDEV_START_RESPONSE_STATUS_SUCCESS 0x0 5550 5551 /* requested VDEV not found */ 5552 #define WMI_INIFIED_VDEV_START_RESPONSE_INVALID_VDEVID 0x1 5553 5554 /* unsupported VDEV combination */ 5555 #define WMI_INIFIED_VDEV_START_RESPONSE_NOT_SUPPORTED 0x2 5556 5557 /* TODO: please add more comments if you have in-depth information */ 5558 struct wmi_vdev_spectral_conf_cmd { 5559 __le32 vdev_id; 5560 5561 /* number of fft samples to send (0 for infinite) */ 5562 __le32 scan_count; 5563 __le32 scan_period; 5564 __le32 scan_priority; 5565 5566 /* number of bins in the FFT: 2^(fft_size - bin_scale) */ 5567 __le32 scan_fft_size; 5568 __le32 scan_gc_ena; 5569 __le32 scan_restart_ena; 5570 __le32 scan_noise_floor_ref; 5571 __le32 scan_init_delay; 5572 __le32 scan_nb_tone_thr; 5573 __le32 scan_str_bin_thr; 5574 __le32 scan_wb_rpt_mode; 5575 __le32 scan_rssi_rpt_mode; 5576 __le32 scan_rssi_thr; 5577 __le32 scan_pwr_format; 5578 5579 /* rpt_mode: Format of FFT report to software for spectral scan 5580 * triggered FFTs: 5581 * 0: No FFT report (only spectral scan summary report) 5582 * 1: 2-dword summary of metrics for each completed FFT + spectral 5583 * scan summary report 5584 * 2: 2-dword summary of metrics for each completed FFT + 5585 * 1x- oversampled bins(in-band) per FFT + spectral scan summary 5586 * report 5587 * 3: 2-dword summary of metrics for each completed FFT + 5588 * 2x- oversampled bins (all) per FFT + spectral scan summary 5589 */ 5590 __le32 scan_rpt_mode; 5591 __le32 scan_bin_scale; 5592 __le32 scan_dbm_adj; 5593 __le32 scan_chn_mask; 5594 } __packed; 5595 5596 struct wmi_vdev_spectral_conf_arg { 5597 u32 vdev_id; 5598 u32 scan_count; 5599 u32 scan_period; 5600 u32 scan_priority; 5601 u32 scan_fft_size; 5602 u32 scan_gc_ena; 5603 u32 scan_restart_ena; 5604 u32 scan_noise_floor_ref; 5605 u32 scan_init_delay; 5606 u32 scan_nb_tone_thr; 5607 u32 scan_str_bin_thr; 5608 u32 scan_wb_rpt_mode; 5609 u32 scan_rssi_rpt_mode; 5610 u32 scan_rssi_thr; 5611 u32 scan_pwr_format; 5612 u32 scan_rpt_mode; 5613 u32 scan_bin_scale; 5614 u32 scan_dbm_adj; 5615 u32 scan_chn_mask; 5616 }; 5617 5618 #define WMI_SPECTRAL_ENABLE_DEFAULT 0 5619 #define WMI_SPECTRAL_COUNT_DEFAULT 0 5620 #define WMI_SPECTRAL_PERIOD_DEFAULT 35 5621 #define WMI_SPECTRAL_PRIORITY_DEFAULT 1 5622 #define WMI_SPECTRAL_FFT_SIZE_DEFAULT 7 5623 #define WMI_SPECTRAL_GC_ENA_DEFAULT 1 5624 #define WMI_SPECTRAL_RESTART_ENA_DEFAULT 0 5625 #define WMI_SPECTRAL_NOISE_FLOOR_REF_DEFAULT -96 5626 #define WMI_SPECTRAL_INIT_DELAY_DEFAULT 80 5627 #define WMI_SPECTRAL_NB_TONE_THR_DEFAULT 12 5628 #define WMI_SPECTRAL_STR_BIN_THR_DEFAULT 8 5629 #define WMI_SPECTRAL_WB_RPT_MODE_DEFAULT 0 5630 #define WMI_SPECTRAL_RSSI_RPT_MODE_DEFAULT 0 5631 #define WMI_SPECTRAL_RSSI_THR_DEFAULT 0xf0 5632 #define WMI_SPECTRAL_PWR_FORMAT_DEFAULT 0 5633 #define WMI_SPECTRAL_RPT_MODE_DEFAULT 2 5634 #define WMI_SPECTRAL_BIN_SCALE_DEFAULT 1 5635 #define WMI_SPECTRAL_DBM_ADJ_DEFAULT 1 5636 #define WMI_SPECTRAL_CHN_MASK_DEFAULT 1 5637 5638 struct wmi_vdev_spectral_enable_cmd { 5639 __le32 vdev_id; 5640 __le32 trigger_cmd; 5641 __le32 enable_cmd; 5642 } __packed; 5643 5644 #define WMI_SPECTRAL_TRIGGER_CMD_TRIGGER 1 5645 #define WMI_SPECTRAL_TRIGGER_CMD_CLEAR 2 5646 #define WMI_SPECTRAL_ENABLE_CMD_ENABLE 1 5647 #define WMI_SPECTRAL_ENABLE_CMD_DISABLE 2 5648 5649 /* Beacon processing related command and event structures */ 5650 struct wmi_bcn_tx_hdr { 5651 __le32 vdev_id; 5652 __le32 tx_rate; 5653 __le32 tx_power; 5654 __le32 bcn_len; 5655 } __packed; 5656 5657 struct wmi_bcn_tx_cmd { 5658 struct wmi_bcn_tx_hdr hdr; 5659 u8 *bcn[0]; 5660 } __packed; 5661 5662 struct wmi_bcn_tx_arg { 5663 u32 vdev_id; 5664 u32 tx_rate; 5665 u32 tx_power; 5666 u32 bcn_len; 5667 const void *bcn; 5668 }; 5669 5670 enum wmi_bcn_tx_ref_flags { 5671 WMI_BCN_TX_REF_FLAG_DTIM_ZERO = 0x1, 5672 WMI_BCN_TX_REF_FLAG_DELIVER_CAB = 0x2, 5673 }; 5674 5675 /* TODO: It is unclear why "no antenna" works while any other seemingly valid 5676 * chainmask yields no beacons on the air at all. 5677 */ 5678 #define WMI_BCN_TX_REF_DEF_ANTENNA 0 5679 5680 struct wmi_bcn_tx_ref_cmd { 5681 __le32 vdev_id; 5682 __le32 data_len; 5683 /* physical address of the frame - dma pointer */ 5684 __le32 data_ptr; 5685 /* id for host to track */ 5686 __le32 msdu_id; 5687 /* frame ctrl to setup PPDU desc */ 5688 __le32 frame_control; 5689 /* to control CABQ traffic: WMI_BCN_TX_REF_FLAG_ */ 5690 __le32 flags; 5691 /* introduced in 10.2 */ 5692 __le32 antenna_mask; 5693 } __packed; 5694 5695 /* Beacon filter */ 5696 #define WMI_BCN_FILTER_ALL 0 /* Filter all beacons */ 5697 #define WMI_BCN_FILTER_NONE 1 /* Pass all beacons */ 5698 #define WMI_BCN_FILTER_RSSI 2 /* Pass Beacons RSSI >= RSSI threshold */ 5699 #define WMI_BCN_FILTER_BSSID 3 /* Pass Beacons with matching BSSID */ 5700 #define WMI_BCN_FILTER_SSID 4 /* Pass Beacons with matching SSID */ 5701 5702 struct wmi_bcn_filter_rx_cmd { 5703 /* Filter ID */ 5704 __le32 bcn_filter_id; 5705 /* Filter type - wmi_bcn_filter */ 5706 __le32 bcn_filter; 5707 /* Buffer len */ 5708 __le32 bcn_filter_len; 5709 /* Filter info (threshold, BSSID, RSSI) */ 5710 u8 *bcn_filter_buf; 5711 } __packed; 5712 5713 /* Capabilities and IEs to be passed to firmware */ 5714 struct wmi_bcn_prb_info { 5715 /* Capabilities */ 5716 __le32 caps; 5717 /* ERP info */ 5718 __le32 erp; 5719 /* Advanced capabilities */ 5720 /* HT capabilities */ 5721 /* HT Info */ 5722 /* ibss_dfs */ 5723 /* wpa Info */ 5724 /* rsn Info */ 5725 /* rrm info */ 5726 /* ath_ext */ 5727 /* app IE */ 5728 } __packed; 5729 5730 struct wmi_bcn_tmpl_cmd { 5731 /* unique id identifying the VDEV, generated by the caller */ 5732 __le32 vdev_id; 5733 /* TIM IE offset from the beginning of the template. */ 5734 __le32 tim_ie_offset; 5735 /* beacon probe capabilities and IEs */ 5736 struct wmi_bcn_prb_info bcn_prb_info; 5737 /* beacon buffer length */ 5738 __le32 buf_len; 5739 /* variable length data */ 5740 u8 data[1]; 5741 } __packed; 5742 5743 struct wmi_prb_tmpl_cmd { 5744 /* unique id identifying the VDEV, generated by the caller */ 5745 __le32 vdev_id; 5746 /* beacon probe capabilities and IEs */ 5747 struct wmi_bcn_prb_info bcn_prb_info; 5748 /* beacon buffer length */ 5749 __le32 buf_len; 5750 /* Variable length data */ 5751 u8 data[1]; 5752 } __packed; 5753 5754 enum wmi_sta_ps_mode { 5755 /* enable power save for the given STA VDEV */ 5756 WMI_STA_PS_MODE_DISABLED = 0, 5757 /* disable power save for a given STA VDEV */ 5758 WMI_STA_PS_MODE_ENABLED = 1, 5759 }; 5760 5761 struct wmi_sta_powersave_mode_cmd { 5762 /* unique id identifying the VDEV, generated by the caller */ 5763 __le32 vdev_id; 5764 5765 /* 5766 * Power save mode 5767 * (see enum wmi_sta_ps_mode) 5768 */ 5769 __le32 sta_ps_mode; 5770 } __packed; 5771 5772 enum wmi_csa_offload_en { 5773 WMI_CSA_OFFLOAD_DISABLE = 0, 5774 WMI_CSA_OFFLOAD_ENABLE = 1, 5775 }; 5776 5777 struct wmi_csa_offload_enable_cmd { 5778 __le32 vdev_id; 5779 __le32 csa_offload_enable; 5780 } __packed; 5781 5782 struct wmi_csa_offload_chanswitch_cmd { 5783 __le32 vdev_id; 5784 struct wmi_channel chan; 5785 } __packed; 5786 5787 /* 5788 * This parameter controls the policy for retrieving frames from AP while the 5789 * STA is in sleep state. 5790 * 5791 * Only takes affect if the sta_ps_mode is enabled 5792 */ 5793 enum wmi_sta_ps_param_rx_wake_policy { 5794 /* 5795 * Wake up when ever there is an RX activity on the VDEV. In this mode 5796 * the Power save SM(state machine) will come out of sleep by either 5797 * sending null frame (or) a data frame (with PS==0) in response to TIM 5798 * bit set in the received beacon frame from AP. 5799 */ 5800 WMI_STA_PS_RX_WAKE_POLICY_WAKE = 0, 5801 5802 /* 5803 * Here the power save state machine will not wakeup in response to TIM 5804 * bit, instead it will send a PSPOLL (or) UASPD trigger based on UAPSD 5805 * configuration setup by WMISET_PS_SET_UAPSD WMI command. When all 5806 * access categories are delivery-enabled, the station will send a 5807 * UAPSD trigger frame, otherwise it will send a PS-Poll. 5808 */ 5809 WMI_STA_PS_RX_WAKE_POLICY_POLL_UAPSD = 1, 5810 }; 5811 5812 /* 5813 * Number of tx frames/beacon that cause the power save SM to wake up. 5814 * 5815 * Value 1 causes the SM to wake up for every TX. Value 0 has a special 5816 * meaning, It will cause the SM to never wake up. This is useful if you want 5817 * to keep the system to sleep all the time for some kind of test mode . host 5818 * can change this parameter any time. It will affect at the next tx frame. 5819 */ 5820 enum wmi_sta_ps_param_tx_wake_threshold { 5821 WMI_STA_PS_TX_WAKE_THRESHOLD_NEVER = 0, 5822 WMI_STA_PS_TX_WAKE_THRESHOLD_ALWAYS = 1, 5823 5824 /* 5825 * Values greater than one indicate that many TX attempts per beacon 5826 * interval before the STA will wake up 5827 */ 5828 }; 5829 5830 /* 5831 * The maximum number of PS-Poll frames the FW will send in response to 5832 * traffic advertised in TIM before waking up (by sending a null frame with PS 5833 * = 0). Value 0 has a special meaning: there is no maximum count and the FW 5834 * will send as many PS-Poll as are necessary to retrieve buffered BU. This 5835 * parameter is used when the RX wake policy is 5836 * WMI_STA_PS_RX_WAKE_POLICY_POLL_UAPSD and ignored when the RX wake 5837 * policy is WMI_STA_PS_RX_WAKE_POLICY_WAKE. 5838 */ 5839 enum wmi_sta_ps_param_pspoll_count { 5840 WMI_STA_PS_PSPOLL_COUNT_NO_MAX = 0, 5841 /* 5842 * Values greater than 0 indicate the maximum numer of PS-Poll frames 5843 * FW will send before waking up. 5844 */ 5845 5846 /* When u-APSD is enabled the firmware will be very reluctant to exit 5847 * STA PS. This could result in very poor Rx performance with STA doing 5848 * PS-Poll for each and every buffered frame. This value is a bit 5849 * arbitrary. 5850 */ 5851 WMI_STA_PS_PSPOLL_COUNT_UAPSD = 3, 5852 }; 5853 5854 /* 5855 * This will include the delivery and trigger enabled state for every AC. 5856 * This is the negotiated state with AP. The host MLME needs to set this based 5857 * on AP capability and the state Set in the association request by the 5858 * station MLME.Lower 8 bits of the value specify the UAPSD configuration. 5859 */ 5860 #define WMI_UAPSD_AC_TYPE_DELI 0 5861 #define WMI_UAPSD_AC_TYPE_TRIG 1 5862 5863 #define WMI_UAPSD_AC_BIT_MASK(ac, type) \ 5864 (type == WMI_UAPSD_AC_TYPE_DELI ? 1 << (ac << 1) : 1 << ((ac << 1) + 1)) 5865 5866 enum wmi_sta_ps_param_uapsd { 5867 WMI_STA_PS_UAPSD_AC0_DELIVERY_EN = (1 << 0), 5868 WMI_STA_PS_UAPSD_AC0_TRIGGER_EN = (1 << 1), 5869 WMI_STA_PS_UAPSD_AC1_DELIVERY_EN = (1 << 2), 5870 WMI_STA_PS_UAPSD_AC1_TRIGGER_EN = (1 << 3), 5871 WMI_STA_PS_UAPSD_AC2_DELIVERY_EN = (1 << 4), 5872 WMI_STA_PS_UAPSD_AC2_TRIGGER_EN = (1 << 5), 5873 WMI_STA_PS_UAPSD_AC3_DELIVERY_EN = (1 << 6), 5874 WMI_STA_PS_UAPSD_AC3_TRIGGER_EN = (1 << 7), 5875 }; 5876 5877 #define WMI_STA_UAPSD_MAX_INTERVAL_MSEC UINT_MAX 5878 5879 struct wmi_sta_uapsd_auto_trig_param { 5880 __le32 wmm_ac; 5881 __le32 user_priority; 5882 __le32 service_interval; 5883 __le32 suspend_interval; 5884 __le32 delay_interval; 5885 }; 5886 5887 struct wmi_sta_uapsd_auto_trig_cmd_fixed_param { 5888 __le32 vdev_id; 5889 struct wmi_mac_addr peer_macaddr; 5890 __le32 num_ac; 5891 }; 5892 5893 struct wmi_sta_uapsd_auto_trig_arg { 5894 u32 wmm_ac; 5895 u32 user_priority; 5896 u32 service_interval; 5897 u32 suspend_interval; 5898 u32 delay_interval; 5899 }; 5900 5901 enum wmi_sta_powersave_param { 5902 /* 5903 * Controls how frames are retrievd from AP while STA is sleeping 5904 * 5905 * (see enum wmi_sta_ps_param_rx_wake_policy) 5906 */ 5907 WMI_STA_PS_PARAM_RX_WAKE_POLICY = 0, 5908 5909 /* 5910 * The STA will go active after this many TX 5911 * 5912 * (see enum wmi_sta_ps_param_tx_wake_threshold) 5913 */ 5914 WMI_STA_PS_PARAM_TX_WAKE_THRESHOLD = 1, 5915 5916 /* 5917 * Number of PS-Poll to send before STA wakes up 5918 * 5919 * (see enum wmi_sta_ps_param_pspoll_count) 5920 * 5921 */ 5922 WMI_STA_PS_PARAM_PSPOLL_COUNT = 2, 5923 5924 /* 5925 * TX/RX inactivity time in msec before going to sleep. 5926 * 5927 * The power save SM will monitor tx/rx activity on the VDEV, if no 5928 * activity for the specified msec of the parameter the Power save 5929 * SM will go to sleep. 5930 */ 5931 WMI_STA_PS_PARAM_INACTIVITY_TIME = 3, 5932 5933 /* 5934 * Set uapsd configuration. 5935 * 5936 * (see enum wmi_sta_ps_param_uapsd) 5937 */ 5938 WMI_STA_PS_PARAM_UAPSD = 4, 5939 }; 5940 5941 struct wmi_sta_powersave_param_cmd { 5942 __le32 vdev_id; 5943 __le32 param_id; /* %WMI_STA_PS_PARAM_ */ 5944 __le32 param_value; 5945 } __packed; 5946 5947 /* No MIMO power save */ 5948 #define WMI_STA_MIMO_PS_MODE_DISABLE 5949 /* mimo powersave mode static*/ 5950 #define WMI_STA_MIMO_PS_MODE_STATIC 5951 /* mimo powersave mode dynamic */ 5952 #define WMI_STA_MIMO_PS_MODE_DYNAMIC 5953 5954 struct wmi_sta_mimo_ps_mode_cmd { 5955 /* unique id identifying the VDEV, generated by the caller */ 5956 __le32 vdev_id; 5957 /* mimo powersave mode as defined above */ 5958 __le32 mimo_pwrsave_mode; 5959 } __packed; 5960 5961 /* U-APSD configuration of peer station from (re)assoc request and TSPECs */ 5962 enum wmi_ap_ps_param_uapsd { 5963 WMI_AP_PS_UAPSD_AC0_DELIVERY_EN = (1 << 0), 5964 WMI_AP_PS_UAPSD_AC0_TRIGGER_EN = (1 << 1), 5965 WMI_AP_PS_UAPSD_AC1_DELIVERY_EN = (1 << 2), 5966 WMI_AP_PS_UAPSD_AC1_TRIGGER_EN = (1 << 3), 5967 WMI_AP_PS_UAPSD_AC2_DELIVERY_EN = (1 << 4), 5968 WMI_AP_PS_UAPSD_AC2_TRIGGER_EN = (1 << 5), 5969 WMI_AP_PS_UAPSD_AC3_DELIVERY_EN = (1 << 6), 5970 WMI_AP_PS_UAPSD_AC3_TRIGGER_EN = (1 << 7), 5971 }; 5972 5973 /* U-APSD maximum service period of peer station */ 5974 enum wmi_ap_ps_peer_param_max_sp { 5975 WMI_AP_PS_PEER_PARAM_MAX_SP_UNLIMITED = 0, 5976 WMI_AP_PS_PEER_PARAM_MAX_SP_2 = 1, 5977 WMI_AP_PS_PEER_PARAM_MAX_SP_4 = 2, 5978 WMI_AP_PS_PEER_PARAM_MAX_SP_6 = 3, 5979 MAX_WMI_AP_PS_PEER_PARAM_MAX_SP, 5980 }; 5981 5982 /* 5983 * AP power save parameter 5984 * Set a power save specific parameter for a peer station 5985 */ 5986 enum wmi_ap_ps_peer_param { 5987 /* Set uapsd configuration for a given peer. 5988 * 5989 * Include the delivery and trigger enabled state for every AC. 5990 * The host MLME needs to set this based on AP capability and stations 5991 * request Set in the association request received from the station. 5992 * 5993 * Lower 8 bits of the value specify the UAPSD configuration. 5994 * 5995 * (see enum wmi_ap_ps_param_uapsd) 5996 * The default value is 0. 5997 */ 5998 WMI_AP_PS_PEER_PARAM_UAPSD = 0, 5999 6000 /* 6001 * Set the service period for a UAPSD capable station 6002 * 6003 * The service period from wme ie in the (re)assoc request frame. 6004 * 6005 * (see enum wmi_ap_ps_peer_param_max_sp) 6006 */ 6007 WMI_AP_PS_PEER_PARAM_MAX_SP = 1, 6008 6009 /* Time in seconds for aging out buffered frames for STA in PS */ 6010 WMI_AP_PS_PEER_PARAM_AGEOUT_TIME = 2, 6011 }; 6012 6013 struct wmi_ap_ps_peer_cmd { 6014 /* unique id identifying the VDEV, generated by the caller */ 6015 __le32 vdev_id; 6016 6017 /* peer MAC address */ 6018 struct wmi_mac_addr peer_macaddr; 6019 6020 /* AP powersave param (see enum wmi_ap_ps_peer_param) */ 6021 __le32 param_id; 6022 6023 /* AP powersave param value */ 6024 __le32 param_value; 6025 } __packed; 6026 6027 /* 128 clients = 4 words */ 6028 #define WMI_TIM_BITMAP_ARRAY_SIZE 4 6029 6030 struct wmi_tim_info { 6031 __le32 tim_len; 6032 __le32 tim_mcast; 6033 __le32 tim_bitmap[WMI_TIM_BITMAP_ARRAY_SIZE]; 6034 __le32 tim_changed; 6035 __le32 tim_num_ps_pending; 6036 } __packed; 6037 6038 struct wmi_tim_info_arg { 6039 __le32 tim_len; 6040 __le32 tim_mcast; 6041 const __le32 *tim_bitmap; 6042 __le32 tim_changed; 6043 __le32 tim_num_ps_pending; 6044 } __packed; 6045 6046 /* Maximum number of NOA Descriptors supported */ 6047 #define WMI_P2P_MAX_NOA_DESCRIPTORS 4 6048 #define WMI_P2P_OPPPS_ENABLE_BIT BIT(0) 6049 #define WMI_P2P_OPPPS_CTWINDOW_OFFSET 1 6050 #define WMI_P2P_NOA_CHANGED_BIT BIT(0) 6051 6052 struct wmi_p2p_noa_info { 6053 /* Bit 0 - Flag to indicate an update in NOA schedule 6054 * Bits 7-1 - Reserved 6055 */ 6056 u8 changed; 6057 /* NOA index */ 6058 u8 index; 6059 /* Bit 0 - Opp PS state of the AP 6060 * Bits 1-7 - Ctwindow in TUs 6061 */ 6062 u8 ctwindow_oppps; 6063 /* Number of NOA descriptors */ 6064 u8 num_descriptors; 6065 6066 struct wmi_p2p_noa_descriptor descriptors[WMI_P2P_MAX_NOA_DESCRIPTORS]; 6067 } __packed; 6068 6069 struct wmi_bcn_info { 6070 struct wmi_tim_info tim_info; 6071 struct wmi_p2p_noa_info p2p_noa_info; 6072 } __packed; 6073 6074 struct wmi_host_swba_event { 6075 __le32 vdev_map; 6076 struct wmi_bcn_info bcn_info[0]; 6077 } __packed; 6078 6079 struct wmi_10_2_4_bcn_info { 6080 struct wmi_tim_info tim_info; 6081 /* The 10.2.4 FW doesn't have p2p NOA info */ 6082 } __packed; 6083 6084 struct wmi_10_2_4_host_swba_event { 6085 __le32 vdev_map; 6086 struct wmi_10_2_4_bcn_info bcn_info[0]; 6087 } __packed; 6088 6089 /* 16 words = 512 client + 1 word = for guard */ 6090 #define WMI_10_4_TIM_BITMAP_ARRAY_SIZE 17 6091 6092 struct wmi_10_4_tim_info { 6093 __le32 tim_len; 6094 __le32 tim_mcast; 6095 __le32 tim_bitmap[WMI_10_4_TIM_BITMAP_ARRAY_SIZE]; 6096 __le32 tim_changed; 6097 __le32 tim_num_ps_pending; 6098 } __packed; 6099 6100 #define WMI_10_4_P2P_MAX_NOA_DESCRIPTORS 1 6101 6102 struct wmi_10_4_p2p_noa_info { 6103 /* Bit 0 - Flag to indicate an update in NOA schedule 6104 * Bits 7-1 - Reserved 6105 */ 6106 u8 changed; 6107 /* NOA index */ 6108 u8 index; 6109 /* Bit 0 - Opp PS state of the AP 6110 * Bits 1-7 - Ctwindow in TUs 6111 */ 6112 u8 ctwindow_oppps; 6113 /* Number of NOA descriptors */ 6114 u8 num_descriptors; 6115 6116 struct wmi_p2p_noa_descriptor 6117 noa_descriptors[WMI_10_4_P2P_MAX_NOA_DESCRIPTORS]; 6118 } __packed; 6119 6120 struct wmi_10_4_bcn_info { 6121 struct wmi_10_4_tim_info tim_info; 6122 struct wmi_10_4_p2p_noa_info p2p_noa_info; 6123 } __packed; 6124 6125 struct wmi_10_4_host_swba_event { 6126 __le32 vdev_map; 6127 struct wmi_10_4_bcn_info bcn_info[0]; 6128 } __packed; 6129 6130 #define WMI_MAX_AP_VDEV 16 6131 6132 struct wmi_tbtt_offset_event { 6133 __le32 vdev_map; 6134 __le32 tbttoffset_list[WMI_MAX_AP_VDEV]; 6135 } __packed; 6136 6137 struct wmi_peer_create_cmd { 6138 __le32 vdev_id; 6139 struct wmi_mac_addr peer_macaddr; 6140 __le32 peer_type; 6141 } __packed; 6142 6143 enum wmi_peer_type { 6144 WMI_PEER_TYPE_DEFAULT = 0, 6145 WMI_PEER_TYPE_BSS = 1, 6146 WMI_PEER_TYPE_TDLS = 2, 6147 }; 6148 6149 struct wmi_peer_delete_cmd { 6150 __le32 vdev_id; 6151 struct wmi_mac_addr peer_macaddr; 6152 } __packed; 6153 6154 struct wmi_peer_flush_tids_cmd { 6155 __le32 vdev_id; 6156 struct wmi_mac_addr peer_macaddr; 6157 __le32 peer_tid_bitmap; 6158 } __packed; 6159 6160 struct wmi_fixed_rate { 6161 /* 6162 * rate mode . 0: disable fixed rate (auto rate) 6163 * 1: legacy (non 11n) rate specified as ieee rate 2*Mbps 6164 * 2: ht20 11n rate specified as mcs index 6165 * 3: ht40 11n rate specified as mcs index 6166 */ 6167 __le32 rate_mode; 6168 /* 6169 * 4 rate values for 4 rate series. series 0 is stored in byte 0 (LSB) 6170 * and series 3 is stored at byte 3 (MSB) 6171 */ 6172 __le32 rate_series; 6173 /* 6174 * 4 retry counts for 4 rate series. retry count for rate 0 is stored 6175 * in byte 0 (LSB) and retry count for rate 3 is stored at byte 3 6176 * (MSB) 6177 */ 6178 __le32 rate_retries; 6179 } __packed; 6180 6181 struct wmi_peer_fixed_rate_cmd { 6182 /* unique id identifying the VDEV, generated by the caller */ 6183 __le32 vdev_id; 6184 /* peer MAC address */ 6185 struct wmi_mac_addr peer_macaddr; 6186 /* fixed rate */ 6187 struct wmi_fixed_rate peer_fixed_rate; 6188 } __packed; 6189 6190 #define WMI_MGMT_TID 17 6191 6192 struct wmi_addba_clear_resp_cmd { 6193 /* unique id identifying the VDEV, generated by the caller */ 6194 __le32 vdev_id; 6195 /* peer MAC address */ 6196 struct wmi_mac_addr peer_macaddr; 6197 } __packed; 6198 6199 struct wmi_addba_send_cmd { 6200 /* unique id identifying the VDEV, generated by the caller */ 6201 __le32 vdev_id; 6202 /* peer MAC address */ 6203 struct wmi_mac_addr peer_macaddr; 6204 /* Tid number */ 6205 __le32 tid; 6206 /* Buffer/Window size*/ 6207 __le32 buffersize; 6208 } __packed; 6209 6210 struct wmi_delba_send_cmd { 6211 /* unique id identifying the VDEV, generated by the caller */ 6212 __le32 vdev_id; 6213 /* peer MAC address */ 6214 struct wmi_mac_addr peer_macaddr; 6215 /* Tid number */ 6216 __le32 tid; 6217 /* Is Initiator */ 6218 __le32 initiator; 6219 /* Reason code */ 6220 __le32 reasoncode; 6221 } __packed; 6222 6223 struct wmi_addba_setresponse_cmd { 6224 /* unique id identifying the vdev, generated by the caller */ 6225 __le32 vdev_id; 6226 /* peer mac address */ 6227 struct wmi_mac_addr peer_macaddr; 6228 /* Tid number */ 6229 __le32 tid; 6230 /* status code */ 6231 __le32 statuscode; 6232 } __packed; 6233 6234 struct wmi_send_singleamsdu_cmd { 6235 /* unique id identifying the vdev, generated by the caller */ 6236 __le32 vdev_id; 6237 /* peer mac address */ 6238 struct wmi_mac_addr peer_macaddr; 6239 /* Tid number */ 6240 __le32 tid; 6241 } __packed; 6242 6243 enum wmi_peer_smps_state { 6244 WMI_PEER_SMPS_PS_NONE = 0x0, 6245 WMI_PEER_SMPS_STATIC = 0x1, 6246 WMI_PEER_SMPS_DYNAMIC = 0x2 6247 }; 6248 6249 enum wmi_peer_chwidth { 6250 WMI_PEER_CHWIDTH_20MHZ = 0, 6251 WMI_PEER_CHWIDTH_40MHZ = 1, 6252 WMI_PEER_CHWIDTH_80MHZ = 2, 6253 WMI_PEER_CHWIDTH_160MHZ = 3, 6254 }; 6255 6256 enum wmi_peer_param { 6257 WMI_PEER_SMPS_STATE = 0x1, /* see %wmi_peer_smps_state */ 6258 WMI_PEER_AMPDU = 0x2, 6259 WMI_PEER_AUTHORIZE = 0x3, 6260 WMI_PEER_CHAN_WIDTH = 0x4, 6261 WMI_PEER_NSS = 0x5, 6262 WMI_PEER_USE_4ADDR = 0x6, 6263 WMI_PEER_DEBUG = 0xa, 6264 WMI_PEER_PHYMODE = 0xd, 6265 WMI_PEER_DUMMY_VAR = 0xff, /* dummy parameter for STA PS workaround */ 6266 }; 6267 6268 struct wmi_peer_set_param_cmd { 6269 __le32 vdev_id; 6270 struct wmi_mac_addr peer_macaddr; 6271 __le32 param_id; 6272 __le32 param_value; 6273 } __packed; 6274 6275 #define MAX_SUPPORTED_RATES 128 6276 6277 struct wmi_rate_set { 6278 /* total number of rates */ 6279 __le32 num_rates; 6280 /* 6281 * rates (each 8bit value) packed into a 32 bit word. 6282 * the rates are filled from least significant byte to most 6283 * significant byte. 6284 */ 6285 __le32 rates[(MAX_SUPPORTED_RATES / 4) + 1]; 6286 } __packed; 6287 6288 struct wmi_rate_set_arg { 6289 unsigned int num_rates; 6290 u8 rates[MAX_SUPPORTED_RATES]; 6291 }; 6292 6293 /* 6294 * NOTE: It would bea good idea to represent the Tx MCS 6295 * info in one word and Rx in another word. This is split 6296 * into multiple words for convenience 6297 */ 6298 struct wmi_vht_rate_set { 6299 __le32 rx_max_rate; /* Max Rx data rate */ 6300 __le32 rx_mcs_set; /* Negotiated RX VHT rates */ 6301 __le32 tx_max_rate; /* Max Tx data rate */ 6302 __le32 tx_mcs_set; /* Negotiated TX VHT rates */ 6303 } __packed; 6304 6305 struct wmi_vht_rate_set_arg { 6306 u32 rx_max_rate; 6307 u32 rx_mcs_set; 6308 u32 tx_max_rate; 6309 u32 tx_mcs_set; 6310 }; 6311 6312 struct wmi_peer_set_rates_cmd { 6313 /* peer MAC address */ 6314 struct wmi_mac_addr peer_macaddr; 6315 /* legacy rate set */ 6316 struct wmi_rate_set peer_legacy_rates; 6317 /* ht rate set */ 6318 struct wmi_rate_set peer_ht_rates; 6319 } __packed; 6320 6321 struct wmi_peer_set_q_empty_callback_cmd { 6322 /* unique id identifying the VDEV, generated by the caller */ 6323 __le32 vdev_id; 6324 /* peer MAC address */ 6325 struct wmi_mac_addr peer_macaddr; 6326 __le32 callback_enable; 6327 } __packed; 6328 6329 struct wmi_peer_flags_map { 6330 u32 auth; 6331 u32 qos; 6332 u32 need_ptk_4_way; 6333 u32 need_gtk_2_way; 6334 u32 apsd; 6335 u32 ht; 6336 u32 bw40; 6337 u32 stbc; 6338 u32 ldbc; 6339 u32 dyn_mimops; 6340 u32 static_mimops; 6341 u32 spatial_mux; 6342 u32 vht; 6343 u32 bw80; 6344 u32 vht_2g; 6345 u32 pmf; 6346 u32 bw160; 6347 }; 6348 6349 enum wmi_peer_flags { 6350 WMI_PEER_AUTH = 0x00000001, 6351 WMI_PEER_QOS = 0x00000002, 6352 WMI_PEER_NEED_PTK_4_WAY = 0x00000004, 6353 WMI_PEER_NEED_GTK_2_WAY = 0x00000010, 6354 WMI_PEER_APSD = 0x00000800, 6355 WMI_PEER_HT = 0x00001000, 6356 WMI_PEER_40MHZ = 0x00002000, 6357 WMI_PEER_STBC = 0x00008000, 6358 WMI_PEER_LDPC = 0x00010000, 6359 WMI_PEER_DYN_MIMOPS = 0x00020000, 6360 WMI_PEER_STATIC_MIMOPS = 0x00040000, 6361 WMI_PEER_SPATIAL_MUX = 0x00200000, 6362 WMI_PEER_VHT = 0x02000000, 6363 WMI_PEER_80MHZ = 0x04000000, 6364 WMI_PEER_VHT_2G = 0x08000000, 6365 WMI_PEER_PMF = 0x10000000, 6366 WMI_PEER_160MHZ = 0x20000000 6367 }; 6368 6369 enum wmi_10x_peer_flags { 6370 WMI_10X_PEER_AUTH = 0x00000001, 6371 WMI_10X_PEER_QOS = 0x00000002, 6372 WMI_10X_PEER_NEED_PTK_4_WAY = 0x00000004, 6373 WMI_10X_PEER_NEED_GTK_2_WAY = 0x00000010, 6374 WMI_10X_PEER_APSD = 0x00000800, 6375 WMI_10X_PEER_HT = 0x00001000, 6376 WMI_10X_PEER_40MHZ = 0x00002000, 6377 WMI_10X_PEER_STBC = 0x00008000, 6378 WMI_10X_PEER_LDPC = 0x00010000, 6379 WMI_10X_PEER_DYN_MIMOPS = 0x00020000, 6380 WMI_10X_PEER_STATIC_MIMOPS = 0x00040000, 6381 WMI_10X_PEER_SPATIAL_MUX = 0x00200000, 6382 WMI_10X_PEER_VHT = 0x02000000, 6383 WMI_10X_PEER_80MHZ = 0x04000000, 6384 WMI_10X_PEER_160MHZ = 0x20000000 6385 }; 6386 6387 enum wmi_10_2_peer_flags { 6388 WMI_10_2_PEER_AUTH = 0x00000001, 6389 WMI_10_2_PEER_QOS = 0x00000002, 6390 WMI_10_2_PEER_NEED_PTK_4_WAY = 0x00000004, 6391 WMI_10_2_PEER_NEED_GTK_2_WAY = 0x00000010, 6392 WMI_10_2_PEER_APSD = 0x00000800, 6393 WMI_10_2_PEER_HT = 0x00001000, 6394 WMI_10_2_PEER_40MHZ = 0x00002000, 6395 WMI_10_2_PEER_STBC = 0x00008000, 6396 WMI_10_2_PEER_LDPC = 0x00010000, 6397 WMI_10_2_PEER_DYN_MIMOPS = 0x00020000, 6398 WMI_10_2_PEER_STATIC_MIMOPS = 0x00040000, 6399 WMI_10_2_PEER_SPATIAL_MUX = 0x00200000, 6400 WMI_10_2_PEER_VHT = 0x02000000, 6401 WMI_10_2_PEER_80MHZ = 0x04000000, 6402 WMI_10_2_PEER_VHT_2G = 0x08000000, 6403 WMI_10_2_PEER_PMF = 0x10000000, 6404 WMI_10_2_PEER_160MHZ = 0x20000000 6405 }; 6406 6407 /* 6408 * Peer rate capabilities. 6409 * 6410 * This is of interest to the ratecontrol 6411 * module which resides in the firmware. The bit definitions are 6412 * consistent with that defined in if_athrate.c. 6413 */ 6414 #define WMI_RC_DS_FLAG 0x01 6415 #define WMI_RC_CW40_FLAG 0x02 6416 #define WMI_RC_SGI_FLAG 0x04 6417 #define WMI_RC_HT_FLAG 0x08 6418 #define WMI_RC_RTSCTS_FLAG 0x10 6419 #define WMI_RC_TX_STBC_FLAG 0x20 6420 #define WMI_RC_RX_STBC_FLAG 0xC0 6421 #define WMI_RC_RX_STBC_FLAG_S 6 6422 #define WMI_RC_WEP_TKIP_FLAG 0x100 6423 #define WMI_RC_TS_FLAG 0x200 6424 #define WMI_RC_UAPSD_FLAG 0x400 6425 6426 /* Maximum listen interval supported by hw in units of beacon interval */ 6427 #define ATH10K_MAX_HW_LISTEN_INTERVAL 5 6428 6429 struct wmi_common_peer_assoc_complete_cmd { 6430 struct wmi_mac_addr peer_macaddr; 6431 __le32 vdev_id; 6432 __le32 peer_new_assoc; /* 1=assoc, 0=reassoc */ 6433 __le32 peer_associd; /* 16 LSBs */ 6434 __le32 peer_flags; 6435 __le32 peer_caps; /* 16 LSBs */ 6436 __le32 peer_listen_intval; 6437 __le32 peer_ht_caps; 6438 __le32 peer_max_mpdu; 6439 __le32 peer_mpdu_density; /* 0..16 */ 6440 __le32 peer_rate_caps; 6441 struct wmi_rate_set peer_legacy_rates; 6442 struct wmi_rate_set peer_ht_rates; 6443 __le32 peer_nss; /* num of spatial streams */ 6444 __le32 peer_vht_caps; 6445 __le32 peer_phymode; 6446 struct wmi_vht_rate_set peer_vht_rates; 6447 }; 6448 6449 struct wmi_main_peer_assoc_complete_cmd { 6450 struct wmi_common_peer_assoc_complete_cmd cmd; 6451 6452 /* HT Operation Element of the peer. Five bytes packed in 2 6453 * INT32 array and filled from lsb to msb. 6454 */ 6455 __le32 peer_ht_info[2]; 6456 } __packed; 6457 6458 struct wmi_10_1_peer_assoc_complete_cmd { 6459 struct wmi_common_peer_assoc_complete_cmd cmd; 6460 } __packed; 6461 6462 #define WMI_PEER_ASSOC_INFO0_MAX_MCS_IDX_LSB 0 6463 #define WMI_PEER_ASSOC_INFO0_MAX_MCS_IDX_MASK 0x0f 6464 #define WMI_PEER_ASSOC_INFO0_MAX_NSS_LSB 4 6465 #define WMI_PEER_ASSOC_INFO0_MAX_NSS_MASK 0xf0 6466 6467 struct wmi_10_2_peer_assoc_complete_cmd { 6468 struct wmi_common_peer_assoc_complete_cmd cmd; 6469 __le32 info0; /* WMI_PEER_ASSOC_INFO0_ */ 6470 } __packed; 6471 6472 #define PEER_BW_RXNSS_OVERRIDE_OFFSET 31 6473 6474 struct wmi_10_4_peer_assoc_complete_cmd { 6475 struct wmi_10_2_peer_assoc_complete_cmd cmd; 6476 __le32 peer_bw_rxnss_override; 6477 } __packed; 6478 6479 struct wmi_peer_assoc_complete_arg { 6480 u8 addr[ETH_ALEN]; 6481 u32 vdev_id; 6482 bool peer_reassoc; 6483 u16 peer_aid; 6484 u32 peer_flags; /* see %WMI_PEER_ */ 6485 u16 peer_caps; 6486 u32 peer_listen_intval; 6487 u32 peer_ht_caps; 6488 u32 peer_max_mpdu; 6489 u32 peer_mpdu_density; /* 0..16 */ 6490 u32 peer_rate_caps; /* see %WMI_RC_ */ 6491 struct wmi_rate_set_arg peer_legacy_rates; 6492 struct wmi_rate_set_arg peer_ht_rates; 6493 u32 peer_num_spatial_streams; 6494 u32 peer_vht_caps; 6495 enum wmi_phy_mode peer_phymode; 6496 struct wmi_vht_rate_set_arg peer_vht_rates; 6497 u32 peer_bw_rxnss_override; 6498 }; 6499 6500 struct wmi_peer_add_wds_entry_cmd { 6501 /* peer MAC address */ 6502 struct wmi_mac_addr peer_macaddr; 6503 /* wds MAC addr */ 6504 struct wmi_mac_addr wds_macaddr; 6505 } __packed; 6506 6507 struct wmi_peer_remove_wds_entry_cmd { 6508 /* wds MAC addr */ 6509 struct wmi_mac_addr wds_macaddr; 6510 } __packed; 6511 6512 struct wmi_peer_q_empty_callback_event { 6513 /* peer MAC address */ 6514 struct wmi_mac_addr peer_macaddr; 6515 } __packed; 6516 6517 /* 6518 * Channel info WMI event 6519 */ 6520 struct wmi_chan_info_event { 6521 __le32 err_code; 6522 __le32 freq; 6523 __le32 cmd_flags; 6524 __le32 noise_floor; 6525 __le32 rx_clear_count; 6526 __le32 cycle_count; 6527 __le32 chan_tx_pwr_range; 6528 __le32 chan_tx_pwr_tp; 6529 __le32 rx_frame_count; 6530 __le32 my_bss_rx_cycle_count; 6531 __le32 rx_11b_mode_data_duration; 6532 __le32 tx_frame_cnt; 6533 __le32 mac_clk_mhz; 6534 6535 } __packed; 6536 6537 struct wmi_10_4_chan_info_event { 6538 __le32 err_code; 6539 __le32 freq; 6540 __le32 cmd_flags; 6541 __le32 noise_floor; 6542 __le32 rx_clear_count; 6543 __le32 cycle_count; 6544 __le32 chan_tx_pwr_range; 6545 __le32 chan_tx_pwr_tp; 6546 __le32 rx_frame_count; 6547 } __packed; 6548 6549 struct wmi_peer_sta_kickout_event { 6550 struct wmi_mac_addr peer_macaddr; 6551 } __packed; 6552 6553 #define WMI_CHAN_INFO_FLAG_COMPLETE BIT(0) 6554 #define WMI_CHAN_INFO_FLAG_PRE_COMPLETE BIT(1) 6555 6556 /* Beacon filter wmi command info */ 6557 #define BCN_FLT_MAX_SUPPORTED_IES 256 6558 #define BCN_FLT_MAX_ELEMS_IE_LIST (BCN_FLT_MAX_SUPPORTED_IES / 32) 6559 6560 struct bss_bcn_stats { 6561 __le32 vdev_id; 6562 __le32 bss_bcnsdropped; 6563 __le32 bss_bcnsdelivered; 6564 } __packed; 6565 6566 struct bcn_filter_stats { 6567 __le32 bcns_dropped; 6568 __le32 bcns_delivered; 6569 __le32 activefilters; 6570 struct bss_bcn_stats bss_stats; 6571 } __packed; 6572 6573 struct wmi_add_bcn_filter_cmd { 6574 u32 vdev_id; 6575 u32 ie_map[BCN_FLT_MAX_ELEMS_IE_LIST]; 6576 } __packed; 6577 6578 enum wmi_sta_keepalive_method { 6579 WMI_STA_KEEPALIVE_METHOD_NULL_FRAME = 1, 6580 WMI_STA_KEEPALIVE_METHOD_UNSOLICITATED_ARP_RESPONSE = 2, 6581 }; 6582 6583 #define WMI_STA_KEEPALIVE_INTERVAL_DISABLE 0 6584 6585 /* Firmware crashes if keepalive interval exceeds this limit */ 6586 #define WMI_STA_KEEPALIVE_INTERVAL_MAX_SECONDS 0xffff 6587 6588 /* note: ip4 addresses are in network byte order, i.e. big endian */ 6589 struct wmi_sta_keepalive_arp_resp { 6590 __be32 src_ip4_addr; 6591 __be32 dest_ip4_addr; 6592 struct wmi_mac_addr dest_mac_addr; 6593 } __packed; 6594 6595 struct wmi_sta_keepalive_cmd { 6596 __le32 vdev_id; 6597 __le32 enabled; 6598 __le32 method; /* WMI_STA_KEEPALIVE_METHOD_ */ 6599 __le32 interval; /* in seconds */ 6600 struct wmi_sta_keepalive_arp_resp arp_resp; 6601 } __packed; 6602 6603 struct wmi_sta_keepalive_arg { 6604 u32 vdev_id; 6605 u32 enabled; 6606 u32 method; 6607 u32 interval; 6608 __be32 src_ip4_addr; 6609 __be32 dest_ip4_addr; 6610 const u8 dest_mac_addr[ETH_ALEN]; 6611 }; 6612 6613 enum wmi_force_fw_hang_type { 6614 WMI_FORCE_FW_HANG_ASSERT = 1, 6615 WMI_FORCE_FW_HANG_NO_DETECT, 6616 WMI_FORCE_FW_HANG_CTRL_EP_FULL, 6617 WMI_FORCE_FW_HANG_EMPTY_POINT, 6618 WMI_FORCE_FW_HANG_STACK_OVERFLOW, 6619 WMI_FORCE_FW_HANG_INFINITE_LOOP, 6620 }; 6621 6622 #define WMI_FORCE_FW_HANG_RANDOM_TIME 0xFFFFFFFF 6623 6624 struct wmi_force_fw_hang_cmd { 6625 __le32 type; 6626 __le32 delay_ms; 6627 } __packed; 6628 6629 enum wmi_pdev_reset_mode_type { 6630 WMI_RST_MODE_TX_FLUSH = 1, 6631 WMI_RST_MODE_WARM_RESET, 6632 WMI_RST_MODE_COLD_RESET, 6633 WMI_RST_MODE_WARM_RESET_RESTORE_CAL, 6634 WMI_RST_MODE_COLD_RESET_RESTORE_CAL, 6635 WMI_RST_MODE_MAX, 6636 }; 6637 6638 enum ath10k_dbglog_level { 6639 ATH10K_DBGLOG_LEVEL_VERBOSE = 0, 6640 ATH10K_DBGLOG_LEVEL_INFO = 1, 6641 ATH10K_DBGLOG_LEVEL_WARN = 2, 6642 ATH10K_DBGLOG_LEVEL_ERR = 3, 6643 }; 6644 6645 /* VAP ids to enable dbglog */ 6646 #define ATH10K_DBGLOG_CFG_VAP_LOG_LSB 0 6647 #define ATH10K_DBGLOG_CFG_VAP_LOG_MASK 0x0000ffff 6648 6649 /* to enable dbglog in the firmware */ 6650 #define ATH10K_DBGLOG_CFG_REPORTING_ENABLE_LSB 16 6651 #define ATH10K_DBGLOG_CFG_REPORTING_ENABLE_MASK 0x00010000 6652 6653 /* timestamp resolution */ 6654 #define ATH10K_DBGLOG_CFG_RESOLUTION_LSB 17 6655 #define ATH10K_DBGLOG_CFG_RESOLUTION_MASK 0x000E0000 6656 6657 /* number of queued messages before sending them to the host */ 6658 #define ATH10K_DBGLOG_CFG_REPORT_SIZE_LSB 20 6659 #define ATH10K_DBGLOG_CFG_REPORT_SIZE_MASK 0x0ff00000 6660 6661 /* 6662 * Log levels to enable. This defines the minimum level to enable, this is 6663 * not a bitmask. See enum ath10k_dbglog_level for the values. 6664 */ 6665 #define ATH10K_DBGLOG_CFG_LOG_LVL_LSB 28 6666 #define ATH10K_DBGLOG_CFG_LOG_LVL_MASK 0x70000000 6667 6668 /* 6669 * Note: this is a cleaned up version of a struct firmware uses. For 6670 * example, config_valid was hidden inside an array. 6671 */ 6672 struct wmi_dbglog_cfg_cmd { 6673 /* bitmask to hold mod id config*/ 6674 __le32 module_enable; 6675 6676 /* see ATH10K_DBGLOG_CFG_ */ 6677 __le32 config_enable; 6678 6679 /* mask of module id bits to be changed */ 6680 __le32 module_valid; 6681 6682 /* mask of config bits to be changed, see ATH10K_DBGLOG_CFG_ */ 6683 __le32 config_valid; 6684 } __packed; 6685 6686 struct wmi_10_4_dbglog_cfg_cmd { 6687 /* bitmask to hold mod id config*/ 6688 __le64 module_enable; 6689 6690 /* see ATH10K_DBGLOG_CFG_ */ 6691 __le32 config_enable; 6692 6693 /* mask of module id bits to be changed */ 6694 __le64 module_valid; 6695 6696 /* mask of config bits to be changed, see ATH10K_DBGLOG_CFG_ */ 6697 __le32 config_valid; 6698 } __packed; 6699 6700 enum wmi_roam_reason { 6701 WMI_ROAM_REASON_BETTER_AP = 1, 6702 WMI_ROAM_REASON_BEACON_MISS = 2, 6703 WMI_ROAM_REASON_LOW_RSSI = 3, 6704 WMI_ROAM_REASON_SUITABLE_AP_FOUND = 4, 6705 WMI_ROAM_REASON_HO_FAILED = 5, 6706 6707 /* keep last */ 6708 WMI_ROAM_REASON_MAX, 6709 }; 6710 6711 struct wmi_roam_ev { 6712 __le32 vdev_id; 6713 __le32 reason; 6714 } __packed; 6715 6716 #define ATH10K_FRAGMT_THRESHOLD_MIN 540 6717 #define ATH10K_FRAGMT_THRESHOLD_MAX 2346 6718 6719 #define WMI_MAX_EVENT 0x1000 6720 /* Maximum number of pending TXed WMI packets */ 6721 #define WMI_SKB_HEADROOM sizeof(struct wmi_cmd_hdr) 6722 6723 /* By default disable power save for IBSS */ 6724 #define ATH10K_DEFAULT_ATIM 0 6725 6726 #define WMI_MAX_MEM_REQS 16 6727 6728 struct wmi_scan_ev_arg { 6729 __le32 event_type; /* %WMI_SCAN_EVENT_ */ 6730 __le32 reason; /* %WMI_SCAN_REASON_ */ 6731 __le32 channel_freq; /* only valid for WMI_SCAN_EVENT_FOREIGN_CHANNEL */ 6732 __le32 scan_req_id; 6733 __le32 scan_id; 6734 __le32 vdev_id; 6735 }; 6736 6737 struct mgmt_tx_compl_params { 6738 u32 desc_id; 6739 u32 status; 6740 u32 ppdu_id; 6741 int ack_rssi; 6742 }; 6743 6744 struct wmi_tlv_mgmt_tx_compl_ev_arg { 6745 __le32 desc_id; 6746 __le32 status; 6747 __le32 pdev_id; 6748 __le32 ppdu_id; 6749 __le32 ack_rssi; 6750 }; 6751 6752 struct wmi_tlv_mgmt_tx_bundle_compl_ev_arg { 6753 __le32 num_reports; 6754 const __le32 *desc_ids; 6755 const __le32 *status; 6756 const __le32 *ppdu_ids; 6757 const __le32 *ack_rssi; 6758 }; 6759 6760 struct wmi_mgmt_rx_ev_arg { 6761 __le32 channel; 6762 __le32 snr; 6763 __le32 rate; 6764 __le32 phy_mode; 6765 __le32 buf_len; 6766 __le32 status; /* %WMI_RX_STATUS_ */ 6767 struct wmi_mgmt_rx_ext_info ext_info; 6768 }; 6769 6770 struct wmi_ch_info_ev_arg { 6771 __le32 err_code; 6772 __le32 freq; 6773 __le32 cmd_flags; 6774 __le32 noise_floor; 6775 __le32 rx_clear_count; 6776 __le32 cycle_count; 6777 __le32 chan_tx_pwr_range; 6778 __le32 chan_tx_pwr_tp; 6779 __le32 rx_frame_count; 6780 __le32 my_bss_rx_cycle_count; 6781 __le32 rx_11b_mode_data_duration; 6782 __le32 tx_frame_cnt; 6783 __le32 mac_clk_mhz; 6784 }; 6785 6786 /* From 10.4 firmware, not sure all have the same values. */ 6787 enum wmi_vdev_start_status { 6788 WMI_VDEV_START_OK = 0, 6789 WMI_VDEV_START_CHAN_INVALID, 6790 }; 6791 6792 struct wmi_vdev_start_ev_arg { 6793 __le32 vdev_id; 6794 __le32 req_id; 6795 __le32 resp_type; /* %WMI_VDEV_RESP_ */ 6796 __le32 status; /* See wmi_vdev_start_status enum above */ 6797 }; 6798 6799 struct wmi_peer_kick_ev_arg { 6800 const u8 *mac_addr; 6801 }; 6802 6803 struct wmi_swba_ev_arg { 6804 __le32 vdev_map; 6805 struct wmi_tim_info_arg tim_info[WMI_MAX_AP_VDEV]; 6806 const struct wmi_p2p_noa_info *noa_info[WMI_MAX_AP_VDEV]; 6807 }; 6808 6809 struct wmi_phyerr_ev_arg { 6810 u32 tsf_timestamp; 6811 u16 freq1; 6812 u16 freq2; 6813 u8 rssi_combined; 6814 u8 chan_width_mhz; 6815 u8 phy_err_code; 6816 u16 nf_chains[4]; 6817 u32 buf_len; 6818 const u8 *buf; 6819 u8 hdr_len; 6820 }; 6821 6822 struct wmi_phyerr_hdr_arg { 6823 u32 num_phyerrs; 6824 u32 tsf_l32; 6825 u32 tsf_u32; 6826 u32 buf_len; 6827 const void *phyerrs; 6828 }; 6829 6830 struct wmi_dfs_status_ev_arg { 6831 u32 status; 6832 }; 6833 6834 struct wmi_svc_rdy_ev_arg { 6835 __le32 min_tx_power; 6836 __le32 max_tx_power; 6837 __le32 ht_cap; 6838 __le32 vht_cap; 6839 __le32 sw_ver0; 6840 __le32 sw_ver1; 6841 __le32 fw_build; 6842 __le32 phy_capab; 6843 __le32 num_rf_chains; 6844 __le32 eeprom_rd; 6845 __le32 num_mem_reqs; 6846 __le32 low_5ghz_chan; 6847 __le32 high_5ghz_chan; 6848 const __le32 *service_map; 6849 size_t service_map_len; 6850 const struct wlan_host_mem_req *mem_reqs[WMI_MAX_MEM_REQS]; 6851 }; 6852 6853 struct wmi_svc_avail_ev_arg { 6854 __le32 service_map_ext_len; 6855 const __le32 *service_map_ext; 6856 }; 6857 6858 struct wmi_rdy_ev_arg { 6859 __le32 sw_version; 6860 __le32 abi_version; 6861 __le32 status; 6862 const u8 *mac_addr; 6863 }; 6864 6865 struct wmi_roam_ev_arg { 6866 __le32 vdev_id; 6867 __le32 reason; 6868 __le32 rssi; 6869 }; 6870 6871 struct wmi_echo_ev_arg { 6872 __le32 value; 6873 }; 6874 6875 struct wmi_pdev_temperature_event { 6876 /* temperature value in Celcius degree */ 6877 __le32 temperature; 6878 } __packed; 6879 6880 struct wmi_pdev_bss_chan_info_event { 6881 __le32 freq; 6882 __le32 noise_floor; 6883 __le64 cycle_busy; 6884 __le64 cycle_total; 6885 __le64 cycle_tx; 6886 __le64 cycle_rx; 6887 __le64 cycle_rx_bss; 6888 __le32 reserved; 6889 } __packed; 6890 6891 /* WOW structures */ 6892 enum wmi_wow_wakeup_event { 6893 WOW_BMISS_EVENT = 0, 6894 WOW_BETTER_AP_EVENT, 6895 WOW_DEAUTH_RECVD_EVENT, 6896 WOW_MAGIC_PKT_RECVD_EVENT, 6897 WOW_GTK_ERR_EVENT, 6898 WOW_FOURWAY_HSHAKE_EVENT, 6899 WOW_EAPOL_RECVD_EVENT, 6900 WOW_NLO_DETECTED_EVENT, 6901 WOW_DISASSOC_RECVD_EVENT, 6902 WOW_PATTERN_MATCH_EVENT, 6903 WOW_CSA_IE_EVENT, 6904 WOW_PROBE_REQ_WPS_IE_EVENT, 6905 WOW_AUTH_REQ_EVENT, 6906 WOW_ASSOC_REQ_EVENT, 6907 WOW_HTT_EVENT, 6908 WOW_RA_MATCH_EVENT, 6909 WOW_HOST_AUTO_SHUTDOWN_EVENT, 6910 WOW_IOAC_MAGIC_EVENT, 6911 WOW_IOAC_SHORT_EVENT, 6912 WOW_IOAC_EXTEND_EVENT, 6913 WOW_IOAC_TIMER_EVENT, 6914 WOW_DFS_PHYERR_RADAR_EVENT, 6915 WOW_BEACON_EVENT, 6916 WOW_CLIENT_KICKOUT_EVENT, 6917 WOW_EVENT_MAX, 6918 }; 6919 6920 #define C2S(x) case x: return #x 6921 6922 static inline const char *wow_wakeup_event(enum wmi_wow_wakeup_event ev) 6923 { 6924 switch (ev) { 6925 C2S(WOW_BMISS_EVENT); 6926 C2S(WOW_BETTER_AP_EVENT); 6927 C2S(WOW_DEAUTH_RECVD_EVENT); 6928 C2S(WOW_MAGIC_PKT_RECVD_EVENT); 6929 C2S(WOW_GTK_ERR_EVENT); 6930 C2S(WOW_FOURWAY_HSHAKE_EVENT); 6931 C2S(WOW_EAPOL_RECVD_EVENT); 6932 C2S(WOW_NLO_DETECTED_EVENT); 6933 C2S(WOW_DISASSOC_RECVD_EVENT); 6934 C2S(WOW_PATTERN_MATCH_EVENT); 6935 C2S(WOW_CSA_IE_EVENT); 6936 C2S(WOW_PROBE_REQ_WPS_IE_EVENT); 6937 C2S(WOW_AUTH_REQ_EVENT); 6938 C2S(WOW_ASSOC_REQ_EVENT); 6939 C2S(WOW_HTT_EVENT); 6940 C2S(WOW_RA_MATCH_EVENT); 6941 C2S(WOW_HOST_AUTO_SHUTDOWN_EVENT); 6942 C2S(WOW_IOAC_MAGIC_EVENT); 6943 C2S(WOW_IOAC_SHORT_EVENT); 6944 C2S(WOW_IOAC_EXTEND_EVENT); 6945 C2S(WOW_IOAC_TIMER_EVENT); 6946 C2S(WOW_DFS_PHYERR_RADAR_EVENT); 6947 C2S(WOW_BEACON_EVENT); 6948 C2S(WOW_CLIENT_KICKOUT_EVENT); 6949 C2S(WOW_EVENT_MAX); 6950 default: 6951 return NULL; 6952 } 6953 } 6954 6955 enum wmi_wow_wake_reason { 6956 WOW_REASON_UNSPECIFIED = -1, 6957 WOW_REASON_NLOD = 0, 6958 WOW_REASON_AP_ASSOC_LOST, 6959 WOW_REASON_LOW_RSSI, 6960 WOW_REASON_DEAUTH_RECVD, 6961 WOW_REASON_DISASSOC_RECVD, 6962 WOW_REASON_GTK_HS_ERR, 6963 WOW_REASON_EAP_REQ, 6964 WOW_REASON_FOURWAY_HS_RECV, 6965 WOW_REASON_TIMER_INTR_RECV, 6966 WOW_REASON_PATTERN_MATCH_FOUND, 6967 WOW_REASON_RECV_MAGIC_PATTERN, 6968 WOW_REASON_P2P_DISC, 6969 WOW_REASON_WLAN_HB, 6970 WOW_REASON_CSA_EVENT, 6971 WOW_REASON_PROBE_REQ_WPS_IE_RECV, 6972 WOW_REASON_AUTH_REQ_RECV, 6973 WOW_REASON_ASSOC_REQ_RECV, 6974 WOW_REASON_HTT_EVENT, 6975 WOW_REASON_RA_MATCH, 6976 WOW_REASON_HOST_AUTO_SHUTDOWN, 6977 WOW_REASON_IOAC_MAGIC_EVENT, 6978 WOW_REASON_IOAC_SHORT_EVENT, 6979 WOW_REASON_IOAC_EXTEND_EVENT, 6980 WOW_REASON_IOAC_TIMER_EVENT, 6981 WOW_REASON_ROAM_HO, 6982 WOW_REASON_DFS_PHYERR_RADADR_EVENT, 6983 WOW_REASON_BEACON_RECV, 6984 WOW_REASON_CLIENT_KICKOUT_EVENT, 6985 WOW_REASON_DEBUG_TEST = 0xFF, 6986 }; 6987 6988 static inline const char *wow_reason(enum wmi_wow_wake_reason reason) 6989 { 6990 switch (reason) { 6991 C2S(WOW_REASON_UNSPECIFIED); 6992 C2S(WOW_REASON_NLOD); 6993 C2S(WOW_REASON_AP_ASSOC_LOST); 6994 C2S(WOW_REASON_LOW_RSSI); 6995 C2S(WOW_REASON_DEAUTH_RECVD); 6996 C2S(WOW_REASON_DISASSOC_RECVD); 6997 C2S(WOW_REASON_GTK_HS_ERR); 6998 C2S(WOW_REASON_EAP_REQ); 6999 C2S(WOW_REASON_FOURWAY_HS_RECV); 7000 C2S(WOW_REASON_TIMER_INTR_RECV); 7001 C2S(WOW_REASON_PATTERN_MATCH_FOUND); 7002 C2S(WOW_REASON_RECV_MAGIC_PATTERN); 7003 C2S(WOW_REASON_P2P_DISC); 7004 C2S(WOW_REASON_WLAN_HB); 7005 C2S(WOW_REASON_CSA_EVENT); 7006 C2S(WOW_REASON_PROBE_REQ_WPS_IE_RECV); 7007 C2S(WOW_REASON_AUTH_REQ_RECV); 7008 C2S(WOW_REASON_ASSOC_REQ_RECV); 7009 C2S(WOW_REASON_HTT_EVENT); 7010 C2S(WOW_REASON_RA_MATCH); 7011 C2S(WOW_REASON_HOST_AUTO_SHUTDOWN); 7012 C2S(WOW_REASON_IOAC_MAGIC_EVENT); 7013 C2S(WOW_REASON_IOAC_SHORT_EVENT); 7014 C2S(WOW_REASON_IOAC_EXTEND_EVENT); 7015 C2S(WOW_REASON_IOAC_TIMER_EVENT); 7016 C2S(WOW_REASON_ROAM_HO); 7017 C2S(WOW_REASON_DFS_PHYERR_RADADR_EVENT); 7018 C2S(WOW_REASON_BEACON_RECV); 7019 C2S(WOW_REASON_CLIENT_KICKOUT_EVENT); 7020 C2S(WOW_REASON_DEBUG_TEST); 7021 default: 7022 return NULL; 7023 } 7024 } 7025 7026 #undef C2S 7027 7028 struct wmi_wow_ev_arg { 7029 u32 vdev_id; 7030 u32 flag; 7031 enum wmi_wow_wake_reason wake_reason; 7032 u32 data_len; 7033 }; 7034 7035 #define WOW_MIN_PATTERN_SIZE 1 7036 #define WOW_MAX_PATTERN_SIZE 148 7037 #define WOW_MAX_PKT_OFFSET 128 7038 #define WOW_HDR_LEN (sizeof(struct ieee80211_hdr_3addr) + \ 7039 sizeof(struct rfc1042_hdr)) 7040 #define WOW_MAX_REDUCE (WOW_HDR_LEN - sizeof(struct ethhdr) - \ 7041 offsetof(struct ieee80211_hdr_3addr, addr1)) 7042 7043 enum wmi_tdls_state { 7044 WMI_TDLS_DISABLE, 7045 WMI_TDLS_ENABLE_PASSIVE, 7046 WMI_TDLS_ENABLE_ACTIVE, 7047 WMI_TDLS_ENABLE_ACTIVE_EXTERNAL_CONTROL, 7048 }; 7049 7050 enum wmi_tdls_peer_state { 7051 WMI_TDLS_PEER_STATE_PEERING, 7052 WMI_TDLS_PEER_STATE_CONNECTED, 7053 WMI_TDLS_PEER_STATE_TEARDOWN, 7054 }; 7055 7056 struct wmi_tdls_peer_update_cmd_arg { 7057 u32 vdev_id; 7058 enum wmi_tdls_peer_state peer_state; 7059 u8 addr[ETH_ALEN]; 7060 }; 7061 7062 #define WMI_TDLS_MAX_SUPP_OPER_CLASSES 32 7063 7064 #define WMI_TDLS_PEER_SP_MASK 0x60 7065 #define WMI_TDLS_PEER_SP_LSB 5 7066 7067 enum wmi_tdls_options { 7068 WMI_TDLS_OFFCHAN_EN = BIT(0), 7069 WMI_TDLS_BUFFER_STA_EN = BIT(1), 7070 WMI_TDLS_SLEEP_STA_EN = BIT(2), 7071 }; 7072 7073 enum { 7074 WMI_TDLS_PEER_QOS_AC_VO = BIT(0), 7075 WMI_TDLS_PEER_QOS_AC_VI = BIT(1), 7076 WMI_TDLS_PEER_QOS_AC_BK = BIT(2), 7077 WMI_TDLS_PEER_QOS_AC_BE = BIT(3), 7078 }; 7079 7080 struct wmi_tdls_peer_capab_arg { 7081 u8 peer_uapsd_queues; 7082 u8 peer_max_sp; 7083 u32 buff_sta_support; 7084 u32 off_chan_support; 7085 u32 peer_curr_operclass; 7086 u32 self_curr_operclass; 7087 u32 peer_chan_len; 7088 u32 peer_operclass_len; 7089 u8 peer_operclass[WMI_TDLS_MAX_SUPP_OPER_CLASSES]; 7090 u32 is_peer_responder; 7091 u32 pref_offchan_num; 7092 u32 pref_offchan_bw; 7093 }; 7094 7095 struct wmi_10_4_tdls_set_state_cmd { 7096 __le32 vdev_id; 7097 __le32 state; 7098 __le32 notification_interval_ms; 7099 __le32 tx_discovery_threshold; 7100 __le32 tx_teardown_threshold; 7101 __le32 rssi_teardown_threshold; 7102 __le32 rssi_delta; 7103 __le32 tdls_options; 7104 __le32 tdls_peer_traffic_ind_window; 7105 __le32 tdls_peer_traffic_response_timeout_ms; 7106 __le32 tdls_puapsd_mask; 7107 __le32 tdls_puapsd_inactivity_time_ms; 7108 __le32 tdls_puapsd_rx_frame_threshold; 7109 __le32 teardown_notification_ms; 7110 __le32 tdls_peer_kickout_threshold; 7111 } __packed; 7112 7113 struct wmi_tdls_peer_capabilities { 7114 __le32 peer_qos; 7115 __le32 buff_sta_support; 7116 __le32 off_chan_support; 7117 __le32 peer_curr_operclass; 7118 __le32 self_curr_operclass; 7119 __le32 peer_chan_len; 7120 __le32 peer_operclass_len; 7121 u8 peer_operclass[WMI_TDLS_MAX_SUPP_OPER_CLASSES]; 7122 __le32 is_peer_responder; 7123 __le32 pref_offchan_num; 7124 __le32 pref_offchan_bw; 7125 struct wmi_channel peer_chan_list[1]; 7126 } __packed; 7127 7128 struct wmi_10_4_tdls_peer_update_cmd { 7129 __le32 vdev_id; 7130 struct wmi_mac_addr peer_macaddr; 7131 __le32 peer_state; 7132 __le32 reserved[4]; 7133 struct wmi_tdls_peer_capabilities peer_capab; 7134 } __packed; 7135 7136 enum wmi_tdls_peer_reason { 7137 WMI_TDLS_TEARDOWN_REASON_TX, 7138 WMI_TDLS_TEARDOWN_REASON_RSSI, 7139 WMI_TDLS_TEARDOWN_REASON_SCAN, 7140 WMI_TDLS_DISCONNECTED_REASON_PEER_DELETE, 7141 WMI_TDLS_TEARDOWN_REASON_PTR_TIMEOUT, 7142 WMI_TDLS_TEARDOWN_REASON_BAD_PTR, 7143 WMI_TDLS_TEARDOWN_REASON_NO_RESPONSE, 7144 WMI_TDLS_ENTER_BUF_STA, 7145 WMI_TDLS_EXIT_BUF_STA, 7146 WMI_TDLS_ENTER_BT_BUSY_MODE, 7147 WMI_TDLS_EXIT_BT_BUSY_MODE, 7148 WMI_TDLS_SCAN_STARTED_EVENT, 7149 WMI_TDLS_SCAN_COMPLETED_EVENT, 7150 }; 7151 7152 enum wmi_tdls_peer_notification { 7153 WMI_TDLS_SHOULD_DISCOVER, 7154 WMI_TDLS_SHOULD_TEARDOWN, 7155 WMI_TDLS_PEER_DISCONNECTED, 7156 WMI_TDLS_CONNECTION_TRACKER_NOTIFICATION, 7157 }; 7158 7159 struct wmi_tdls_peer_event { 7160 struct wmi_mac_addr peer_macaddr; 7161 /* see enum wmi_tdls_peer_notification*/ 7162 __le32 peer_status; 7163 /* see enum wmi_tdls_peer_reason */ 7164 __le32 peer_reason; 7165 __le32 vdev_id; 7166 } __packed; 7167 7168 enum wmi_txbf_conf { 7169 WMI_TXBF_CONF_UNSUPPORTED, 7170 WMI_TXBF_CONF_BEFORE_ASSOC, 7171 WMI_TXBF_CONF_AFTER_ASSOC, 7172 }; 7173 7174 #define WMI_CCA_DETECT_LEVEL_AUTO 0 7175 #define WMI_CCA_DETECT_MARGIN_AUTO 0 7176 7177 struct wmi_pdev_set_adaptive_cca_params { 7178 __le32 enable; 7179 __le32 cca_detect_level; 7180 __le32 cca_detect_margin; 7181 } __packed; 7182 7183 #define WMI_PNO_MAX_SCHED_SCAN_PLANS 2 7184 #define WMI_PNO_MAX_SCHED_SCAN_PLAN_INT 7200 7185 #define WMI_PNO_MAX_SCHED_SCAN_PLAN_ITRNS 100 7186 #define WMI_PNO_MAX_NETW_CHANNELS 26 7187 #define WMI_PNO_MAX_NETW_CHANNELS_EX 60 7188 #define WMI_PNO_MAX_SUPP_NETWORKS WLAN_SCAN_PARAMS_MAX_SSID 7189 #define WMI_PNO_MAX_IE_LENGTH WLAN_SCAN_PARAMS_MAX_IE_LEN 7190 7191 /*size based of dot11 declaration without extra IEs as we will not carry those for PNO*/ 7192 #define WMI_PNO_MAX_PB_REQ_SIZE 450 7193 7194 #define WMI_PNO_24G_DEFAULT_CH 1 7195 #define WMI_PNO_5G_DEFAULT_CH 36 7196 7197 #define WMI_ACTIVE_MAX_CHANNEL_TIME 40 7198 #define WMI_PASSIVE_MAX_CHANNEL_TIME 110 7199 7200 /* SSID broadcast type */ 7201 enum wmi_SSID_bcast_type { 7202 BCAST_UNKNOWN = 0, 7203 BCAST_NORMAL = 1, 7204 BCAST_HIDDEN = 2, 7205 }; 7206 7207 struct wmi_network_type { 7208 struct wmi_ssid ssid; 7209 u32 authentication; 7210 u32 encryption; 7211 u32 bcast_nw_type; 7212 u8 channel_count; 7213 u16 channels[WMI_PNO_MAX_NETW_CHANNELS_EX]; 7214 s32 rssi_threshold; 7215 } __packed; 7216 7217 struct wmi_pno_scan_req { 7218 u8 enable; 7219 u8 vdev_id; 7220 u8 uc_networks_count; 7221 struct wmi_network_type a_networks[WMI_PNO_MAX_SUPP_NETWORKS]; 7222 u32 fast_scan_period; 7223 u32 slow_scan_period; 7224 u8 fast_scan_max_cycles; 7225 7226 bool do_passive_scan; 7227 7228 u32 delay_start_time; 7229 u32 active_min_time; 7230 u32 active_max_time; 7231 u32 passive_min_time; 7232 u32 passive_max_time; 7233 7234 /* mac address randomization attributes */ 7235 u32 enable_pno_scan_randomization; 7236 u8 mac_addr[ETH_ALEN]; 7237 u8 mac_addr_mask[ETH_ALEN]; 7238 } __packed; 7239 7240 enum wmi_host_platform_type { 7241 WMI_HOST_PLATFORM_HIGH_PERF, 7242 WMI_HOST_PLATFORM_LOW_PERF, 7243 }; 7244 7245 enum wmi_bss_survey_req_type { 7246 WMI_BSS_SURVEY_REQ_TYPE_READ = 1, 7247 WMI_BSS_SURVEY_REQ_TYPE_READ_CLEAR, 7248 }; 7249 7250 struct wmi_pdev_chan_info_req_cmd { 7251 __le32 type; 7252 __le32 reserved; 7253 } __packed; 7254 7255 /* bb timing register configurations */ 7256 struct wmi_bb_timing_cfg_arg { 7257 /* Tx_end to pa off timing */ 7258 u32 bb_tx_timing; 7259 7260 /* Tx_end to external pa off timing */ 7261 u32 bb_xpa_timing; 7262 }; 7263 7264 struct wmi_pdev_bb_timing_cfg_cmd { 7265 /* Tx_end to pa off timing */ 7266 __le32 bb_tx_timing; 7267 7268 /* Tx_end to external pa off timing */ 7269 __le32 bb_xpa_timing; 7270 } __packed; 7271 7272 struct ath10k; 7273 struct ath10k_vif; 7274 struct ath10k_fw_stats_pdev; 7275 struct ath10k_fw_stats_peer; 7276 struct ath10k_fw_stats; 7277 7278 int ath10k_wmi_attach(struct ath10k *ar); 7279 void ath10k_wmi_detach(struct ath10k *ar); 7280 void ath10k_wmi_free_host_mem(struct ath10k *ar); 7281 int ath10k_wmi_wait_for_service_ready(struct ath10k *ar); 7282 int ath10k_wmi_wait_for_unified_ready(struct ath10k *ar); 7283 7284 struct sk_buff *ath10k_wmi_alloc_skb(struct ath10k *ar, u32 len); 7285 int ath10k_wmi_connect(struct ath10k *ar); 7286 7287 struct sk_buff *ath10k_wmi_alloc_skb(struct ath10k *ar, u32 len); 7288 int ath10k_wmi_cmd_send(struct ath10k *ar, struct sk_buff *skb, u32 cmd_id); 7289 int ath10k_wmi_cmd_send_nowait(struct ath10k *ar, struct sk_buff *skb, 7290 u32 cmd_id); 7291 void ath10k_wmi_start_scan_init(struct ath10k *ar, struct wmi_start_scan_arg *arg); 7292 7293 void ath10k_wmi_pull_pdev_stats_base(const struct wmi_pdev_stats_base *src, 7294 struct ath10k_fw_stats_pdev *dst); 7295 void ath10k_wmi_pull_pdev_stats_tx(const struct wmi_pdev_stats_tx *src, 7296 struct ath10k_fw_stats_pdev *dst); 7297 void ath10k_wmi_pull_pdev_stats_rx(const struct wmi_pdev_stats_rx *src, 7298 struct ath10k_fw_stats_pdev *dst); 7299 void ath10k_wmi_pull_pdev_stats_extra(const struct wmi_pdev_stats_extra *src, 7300 struct ath10k_fw_stats_pdev *dst); 7301 void ath10k_wmi_pull_peer_stats(const struct wmi_peer_stats *src, 7302 struct ath10k_fw_stats_peer *dst); 7303 void ath10k_wmi_put_host_mem_chunks(struct ath10k *ar, 7304 struct wmi_host_mem_chunks *chunks); 7305 void ath10k_wmi_put_start_scan_common(struct wmi_start_scan_common *cmn, 7306 const struct wmi_start_scan_arg *arg); 7307 void ath10k_wmi_set_wmm_param(struct wmi_wmm_params *params, 7308 const struct wmi_wmm_params_arg *arg); 7309 void ath10k_wmi_put_wmi_channel(struct wmi_channel *ch, 7310 const struct wmi_channel_arg *arg); 7311 int ath10k_wmi_start_scan_verify(const struct wmi_start_scan_arg *arg); 7312 7313 int ath10k_wmi_event_scan(struct ath10k *ar, struct sk_buff *skb); 7314 int ath10k_wmi_event_mgmt_rx(struct ath10k *ar, struct sk_buff *skb); 7315 int ath10k_wmi_event_mgmt_tx_compl(struct ath10k *ar, struct sk_buff *skb); 7316 int ath10k_wmi_event_mgmt_tx_bundle_compl(struct ath10k *ar, struct sk_buff *skb); 7317 void ath10k_wmi_event_chan_info(struct ath10k *ar, struct sk_buff *skb); 7318 void ath10k_wmi_event_echo(struct ath10k *ar, struct sk_buff *skb); 7319 int ath10k_wmi_event_debug_mesg(struct ath10k *ar, struct sk_buff *skb); 7320 void ath10k_wmi_event_update_stats(struct ath10k *ar, struct sk_buff *skb); 7321 void ath10k_wmi_event_vdev_start_resp(struct ath10k *ar, struct sk_buff *skb); 7322 void ath10k_wmi_event_vdev_stopped(struct ath10k *ar, struct sk_buff *skb); 7323 void ath10k_wmi_event_peer_sta_kickout(struct ath10k *ar, struct sk_buff *skb); 7324 void ath10k_wmi_event_host_swba(struct ath10k *ar, struct sk_buff *skb); 7325 void ath10k_wmi_event_tbttoffset_update(struct ath10k *ar, struct sk_buff *skb); 7326 void ath10k_wmi_event_dfs(struct ath10k *ar, 7327 struct wmi_phyerr_ev_arg *phyerr, u64 tsf); 7328 void ath10k_wmi_event_spectral_scan(struct ath10k *ar, 7329 struct wmi_phyerr_ev_arg *phyerr, 7330 u64 tsf); 7331 void ath10k_wmi_event_phyerr(struct ath10k *ar, struct sk_buff *skb); 7332 void ath10k_wmi_event_roam(struct ath10k *ar, struct sk_buff *skb); 7333 void ath10k_wmi_event_profile_match(struct ath10k *ar, struct sk_buff *skb); 7334 void ath10k_wmi_event_debug_print(struct ath10k *ar, struct sk_buff *skb); 7335 void ath10k_wmi_event_pdev_qvit(struct ath10k *ar, struct sk_buff *skb); 7336 void ath10k_wmi_event_wlan_profile_data(struct ath10k *ar, struct sk_buff *skb); 7337 void ath10k_wmi_event_rtt_measurement_report(struct ath10k *ar, 7338 struct sk_buff *skb); 7339 void ath10k_wmi_event_tsf_measurement_report(struct ath10k *ar, 7340 struct sk_buff *skb); 7341 void ath10k_wmi_event_rtt_error_report(struct ath10k *ar, struct sk_buff *skb); 7342 void ath10k_wmi_event_wow_wakeup_host(struct ath10k *ar, struct sk_buff *skb); 7343 void ath10k_wmi_event_dcs_interference(struct ath10k *ar, struct sk_buff *skb); 7344 void ath10k_wmi_event_pdev_tpc_config(struct ath10k *ar, struct sk_buff *skb); 7345 void ath10k_wmi_event_pdev_ftm_intg(struct ath10k *ar, struct sk_buff *skb); 7346 void ath10k_wmi_event_gtk_offload_status(struct ath10k *ar, 7347 struct sk_buff *skb); 7348 void ath10k_wmi_event_gtk_rekey_fail(struct ath10k *ar, struct sk_buff *skb); 7349 void ath10k_wmi_event_delba_complete(struct ath10k *ar, struct sk_buff *skb); 7350 void ath10k_wmi_event_addba_complete(struct ath10k *ar, struct sk_buff *skb); 7351 void ath10k_wmi_event_vdev_install_key_complete(struct ath10k *ar, 7352 struct sk_buff *skb); 7353 void ath10k_wmi_event_inst_rssi_stats(struct ath10k *ar, struct sk_buff *skb); 7354 void ath10k_wmi_event_vdev_standby_req(struct ath10k *ar, struct sk_buff *skb); 7355 void ath10k_wmi_event_vdev_resume_req(struct ath10k *ar, struct sk_buff *skb); 7356 void ath10k_wmi_event_service_ready(struct ath10k *ar, struct sk_buff *skb); 7357 int ath10k_wmi_event_ready(struct ath10k *ar, struct sk_buff *skb); 7358 void ath10k_wmi_event_service_available(struct ath10k *ar, struct sk_buff *skb); 7359 int ath10k_wmi_op_pull_phyerr_ev(struct ath10k *ar, const void *phyerr_buf, 7360 int left_len, struct wmi_phyerr_ev_arg *arg); 7361 void ath10k_wmi_main_op_fw_stats_fill(struct ath10k *ar, 7362 struct ath10k_fw_stats *fw_stats, 7363 char *buf); 7364 void ath10k_wmi_10x_op_fw_stats_fill(struct ath10k *ar, 7365 struct ath10k_fw_stats *fw_stats, 7366 char *buf); 7367 size_t ath10k_wmi_fw_stats_num_peers(struct list_head *head); 7368 size_t ath10k_wmi_fw_stats_num_vdevs(struct list_head *head); 7369 void ath10k_wmi_10_4_op_fw_stats_fill(struct ath10k *ar, 7370 struct ath10k_fw_stats *fw_stats, 7371 char *buf); 7372 int ath10k_wmi_op_get_vdev_subtype(struct ath10k *ar, 7373 enum wmi_vdev_subtype subtype); 7374 int ath10k_wmi_barrier(struct ath10k *ar); 7375 void ath10k_wmi_tpc_config_get_rate_code(u8 *rate_code, u16 *pream_table, 7376 u32 num_tx_chain); 7377 void ath10k_wmi_event_tpc_final_table(struct ath10k *ar, struct sk_buff *skb); 7378 7379 #endif /* _WMI_H_ */ 7380