1 /* 2 * Copyright (c) 2005-2011 Atheros Communications Inc. 3 * Copyright (c) 2011-2017 Qualcomm Atheros, Inc. 4 * Copyright (c) 2018, The Linux Foundation. All rights reserved. 5 * 6 * Permission to use, copy, modify, and/or distribute this software for any 7 * purpose with or without fee is hereby granted, provided that the above 8 * copyright notice and this permission notice appear in all copies. 9 * 10 * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES 11 * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF 12 * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR 13 * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES 14 * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN 15 * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF 16 * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. 17 */ 18 19 #ifndef _WMI_H_ 20 #define _WMI_H_ 21 22 #include <linux/types.h> 23 #include <net/mac80211.h> 24 25 /* 26 * This file specifies the WMI interface for the Unified Software 27 * Architecture. 28 * 29 * It includes definitions of all the commands and events. Commands are 30 * messages from the host to the target. Events and Replies are messages 31 * from the target to the host. 32 * 33 * Ownership of correctness in regards to WMI commands belongs to the host 34 * driver and the target is not required to validate parameters for value, 35 * proper range, or any other checking. 36 * 37 * Guidelines for extending this interface are below. 38 * 39 * 1. Add new WMI commands ONLY within the specified range - 0x9000 - 0x9fff 40 * 41 * 2. Use ONLY u32 type for defining member variables within WMI 42 * command/event structures. Do not use u8, u16, bool or 43 * enum types within these structures. 44 * 45 * 3. DO NOT define bit fields within structures. Implement bit fields 46 * using masks if necessary. Do not use the programming language's bit 47 * field definition. 48 * 49 * 4. Define macros for encode/decode of u8, u16 fields within 50 * the u32 variables. Use these macros for set/get of these fields. 51 * Try to use this to optimize the structure without bloating it with 52 * u32 variables for every lower sized field. 53 * 54 * 5. Do not use PACK/UNPACK attributes for the structures as each member 55 * variable is already 4-byte aligned by virtue of being a u32 56 * type. 57 * 58 * 6. Comment each parameter part of the WMI command/event structure by 59 * using the 2 stars at the beginning of C comment instead of one star to 60 * enable HTML document generation using Doxygen. 61 * 62 */ 63 64 /* Control Path */ 65 struct wmi_cmd_hdr { 66 __le32 cmd_id; 67 } __packed; 68 69 #define WMI_CMD_HDR_CMD_ID_MASK 0x00FFFFFF 70 #define WMI_CMD_HDR_CMD_ID_LSB 0 71 #define WMI_CMD_HDR_PLT_PRIV_MASK 0xFF000000 72 #define WMI_CMD_HDR_PLT_PRIV_LSB 24 73 74 #define HTC_PROTOCOL_VERSION 0x0002 75 #define WMI_PROTOCOL_VERSION 0x0002 76 77 /* 78 * There is no signed version of __le32, so for a temporary solution come 79 * up with our own version. The idea is from fs/ntfs/endian.h. 80 * 81 * Use a_ prefix so that it doesn't conflict if we get proper support to 82 * linux/types.h. 83 */ 84 typedef __s32 __bitwise a_sle32; 85 86 static inline a_sle32 a_cpu_to_sle32(s32 val) 87 { 88 return (__force a_sle32)cpu_to_le32(val); 89 } 90 91 static inline s32 a_sle32_to_cpu(a_sle32 val) 92 { 93 return le32_to_cpu((__force __le32)val); 94 } 95 96 enum wmi_service { 97 WMI_SERVICE_BEACON_OFFLOAD = 0, 98 WMI_SERVICE_SCAN_OFFLOAD, 99 WMI_SERVICE_ROAM_OFFLOAD, 100 WMI_SERVICE_BCN_MISS_OFFLOAD, 101 WMI_SERVICE_STA_PWRSAVE, 102 WMI_SERVICE_STA_ADVANCED_PWRSAVE, 103 WMI_SERVICE_AP_UAPSD, 104 WMI_SERVICE_AP_DFS, 105 WMI_SERVICE_11AC, 106 WMI_SERVICE_BLOCKACK, 107 WMI_SERVICE_PHYERR, 108 WMI_SERVICE_BCN_FILTER, 109 WMI_SERVICE_RTT, 110 WMI_SERVICE_RATECTRL, 111 WMI_SERVICE_WOW, 112 WMI_SERVICE_RATECTRL_CACHE, 113 WMI_SERVICE_IRAM_TIDS, 114 WMI_SERVICE_ARPNS_OFFLOAD, 115 WMI_SERVICE_NLO, 116 WMI_SERVICE_GTK_OFFLOAD, 117 WMI_SERVICE_SCAN_SCH, 118 WMI_SERVICE_CSA_OFFLOAD, 119 WMI_SERVICE_CHATTER, 120 WMI_SERVICE_COEX_FREQAVOID, 121 WMI_SERVICE_PACKET_POWER_SAVE, 122 WMI_SERVICE_FORCE_FW_HANG, 123 WMI_SERVICE_GPIO, 124 WMI_SERVICE_STA_DTIM_PS_MODULATED_DTIM, 125 WMI_SERVICE_STA_UAPSD_BASIC_AUTO_TRIG, 126 WMI_SERVICE_STA_UAPSD_VAR_AUTO_TRIG, 127 WMI_SERVICE_STA_KEEP_ALIVE, 128 WMI_SERVICE_TX_ENCAP, 129 WMI_SERVICE_BURST, 130 WMI_SERVICE_SMART_ANTENNA_SW_SUPPORT, 131 WMI_SERVICE_SMART_ANTENNA_HW_SUPPORT, 132 WMI_SERVICE_ROAM_SCAN_OFFLOAD, 133 WMI_SERVICE_AP_PS_DETECT_OUT_OF_SYNC, 134 WMI_SERVICE_EARLY_RX, 135 WMI_SERVICE_STA_SMPS, 136 WMI_SERVICE_FWTEST, 137 WMI_SERVICE_STA_WMMAC, 138 WMI_SERVICE_TDLS, 139 WMI_SERVICE_MCC_BCN_INTERVAL_CHANGE, 140 WMI_SERVICE_ADAPTIVE_OCS, 141 WMI_SERVICE_BA_SSN_SUPPORT, 142 WMI_SERVICE_FILTER_IPSEC_NATKEEPALIVE, 143 WMI_SERVICE_WLAN_HB, 144 WMI_SERVICE_LTE_ANT_SHARE_SUPPORT, 145 WMI_SERVICE_BATCH_SCAN, 146 WMI_SERVICE_QPOWER, 147 WMI_SERVICE_PLMREQ, 148 WMI_SERVICE_THERMAL_MGMT, 149 WMI_SERVICE_RMC, 150 WMI_SERVICE_MHF_OFFLOAD, 151 WMI_SERVICE_COEX_SAR, 152 WMI_SERVICE_BCN_TXRATE_OVERRIDE, 153 WMI_SERVICE_NAN, 154 WMI_SERVICE_L1SS_STAT, 155 WMI_SERVICE_ESTIMATE_LINKSPEED, 156 WMI_SERVICE_OBSS_SCAN, 157 WMI_SERVICE_TDLS_OFFCHAN, 158 WMI_SERVICE_TDLS_UAPSD_BUFFER_STA, 159 WMI_SERVICE_TDLS_UAPSD_SLEEP_STA, 160 WMI_SERVICE_IBSS_PWRSAVE, 161 WMI_SERVICE_LPASS, 162 WMI_SERVICE_EXTSCAN, 163 WMI_SERVICE_D0WOW, 164 WMI_SERVICE_HSOFFLOAD, 165 WMI_SERVICE_ROAM_HO_OFFLOAD, 166 WMI_SERVICE_RX_FULL_REORDER, 167 WMI_SERVICE_DHCP_OFFLOAD, 168 WMI_SERVICE_STA_RX_IPA_OFFLOAD_SUPPORT, 169 WMI_SERVICE_MDNS_OFFLOAD, 170 WMI_SERVICE_SAP_AUTH_OFFLOAD, 171 WMI_SERVICE_ATF, 172 WMI_SERVICE_COEX_GPIO, 173 WMI_SERVICE_ENHANCED_PROXY_STA, 174 WMI_SERVICE_TT, 175 WMI_SERVICE_PEER_CACHING, 176 WMI_SERVICE_AUX_SPECTRAL_INTF, 177 WMI_SERVICE_AUX_CHAN_LOAD_INTF, 178 WMI_SERVICE_BSS_CHANNEL_INFO_64, 179 WMI_SERVICE_EXT_RES_CFG_SUPPORT, 180 WMI_SERVICE_MESH_11S, 181 WMI_SERVICE_MESH_NON_11S, 182 WMI_SERVICE_PEER_STATS, 183 WMI_SERVICE_RESTRT_CHNL_SUPPORT, 184 WMI_SERVICE_PERIODIC_CHAN_STAT_SUPPORT, 185 WMI_SERVICE_TX_MODE_PUSH_ONLY, 186 WMI_SERVICE_TX_MODE_PUSH_PULL, 187 WMI_SERVICE_TX_MODE_DYNAMIC, 188 WMI_SERVICE_VDEV_RX_FILTER, 189 WMI_SERVICE_BTCOEX, 190 WMI_SERVICE_CHECK_CAL_VERSION, 191 WMI_SERVICE_DBGLOG_WARN2, 192 WMI_SERVICE_BTCOEX_DUTY_CYCLE, 193 WMI_SERVICE_4_WIRE_COEX_SUPPORT, 194 WMI_SERVICE_EXTENDED_NSS_SUPPORT, 195 WMI_SERVICE_PROG_GPIO_BAND_SELECT, 196 WMI_SERVICE_SMART_LOGGING_SUPPORT, 197 WMI_SERVICE_TDLS_CONN_TRACKER_IN_HOST_MODE, 198 WMI_SERVICE_TDLS_EXPLICIT_MODE_ONLY, 199 WMI_SERVICE_MGMT_TX_WMI, 200 WMI_SERVICE_TDLS_WIDER_BANDWIDTH, 201 WMI_SERVICE_HTT_MGMT_TX_COMP_VALID_FLAGS, 202 WMI_SERVICE_HOST_DFS_CHECK_SUPPORT, 203 WMI_SERVICE_TPC_STATS_FINAL, 204 WMI_SERVICE_RESET_CHIP, 205 WMI_SERVICE_SPOOF_MAC_SUPPORT, 206 WMI_SERVICE_TX_DATA_ACK_RSSI, 207 WMI_SERVICE_VDEV_DIFFERENT_BEACON_INTERVAL_SUPPORT, 208 209 /* keep last */ 210 WMI_SERVICE_MAX, 211 }; 212 213 enum wmi_10x_service { 214 WMI_10X_SERVICE_BEACON_OFFLOAD = 0, 215 WMI_10X_SERVICE_SCAN_OFFLOAD, 216 WMI_10X_SERVICE_ROAM_OFFLOAD, 217 WMI_10X_SERVICE_BCN_MISS_OFFLOAD, 218 WMI_10X_SERVICE_STA_PWRSAVE, 219 WMI_10X_SERVICE_STA_ADVANCED_PWRSAVE, 220 WMI_10X_SERVICE_AP_UAPSD, 221 WMI_10X_SERVICE_AP_DFS, 222 WMI_10X_SERVICE_11AC, 223 WMI_10X_SERVICE_BLOCKACK, 224 WMI_10X_SERVICE_PHYERR, 225 WMI_10X_SERVICE_BCN_FILTER, 226 WMI_10X_SERVICE_RTT, 227 WMI_10X_SERVICE_RATECTRL, 228 WMI_10X_SERVICE_WOW, 229 WMI_10X_SERVICE_RATECTRL_CACHE, 230 WMI_10X_SERVICE_IRAM_TIDS, 231 WMI_10X_SERVICE_BURST, 232 233 /* introduced in 10.2 */ 234 WMI_10X_SERVICE_SMART_ANTENNA_SW_SUPPORT, 235 WMI_10X_SERVICE_FORCE_FW_HANG, 236 WMI_10X_SERVICE_SMART_ANTENNA_HW_SUPPORT, 237 WMI_10X_SERVICE_ATF, 238 WMI_10X_SERVICE_COEX_GPIO, 239 WMI_10X_SERVICE_AUX_SPECTRAL_INTF, 240 WMI_10X_SERVICE_AUX_CHAN_LOAD_INTF, 241 WMI_10X_SERVICE_BSS_CHANNEL_INFO_64, 242 WMI_10X_SERVICE_MESH, 243 WMI_10X_SERVICE_EXT_RES_CFG_SUPPORT, 244 WMI_10X_SERVICE_PEER_STATS, 245 WMI_10X_SERVICE_RESET_CHIP, 246 WMI_10X_SERVICE_HTT_MGMT_TX_COMP_VALID_FLAGS, 247 }; 248 249 enum wmi_main_service { 250 WMI_MAIN_SERVICE_BEACON_OFFLOAD = 0, 251 WMI_MAIN_SERVICE_SCAN_OFFLOAD, 252 WMI_MAIN_SERVICE_ROAM_OFFLOAD, 253 WMI_MAIN_SERVICE_BCN_MISS_OFFLOAD, 254 WMI_MAIN_SERVICE_STA_PWRSAVE, 255 WMI_MAIN_SERVICE_STA_ADVANCED_PWRSAVE, 256 WMI_MAIN_SERVICE_AP_UAPSD, 257 WMI_MAIN_SERVICE_AP_DFS, 258 WMI_MAIN_SERVICE_11AC, 259 WMI_MAIN_SERVICE_BLOCKACK, 260 WMI_MAIN_SERVICE_PHYERR, 261 WMI_MAIN_SERVICE_BCN_FILTER, 262 WMI_MAIN_SERVICE_RTT, 263 WMI_MAIN_SERVICE_RATECTRL, 264 WMI_MAIN_SERVICE_WOW, 265 WMI_MAIN_SERVICE_RATECTRL_CACHE, 266 WMI_MAIN_SERVICE_IRAM_TIDS, 267 WMI_MAIN_SERVICE_ARPNS_OFFLOAD, 268 WMI_MAIN_SERVICE_NLO, 269 WMI_MAIN_SERVICE_GTK_OFFLOAD, 270 WMI_MAIN_SERVICE_SCAN_SCH, 271 WMI_MAIN_SERVICE_CSA_OFFLOAD, 272 WMI_MAIN_SERVICE_CHATTER, 273 WMI_MAIN_SERVICE_COEX_FREQAVOID, 274 WMI_MAIN_SERVICE_PACKET_POWER_SAVE, 275 WMI_MAIN_SERVICE_FORCE_FW_HANG, 276 WMI_MAIN_SERVICE_GPIO, 277 WMI_MAIN_SERVICE_STA_DTIM_PS_MODULATED_DTIM, 278 WMI_MAIN_SERVICE_STA_UAPSD_BASIC_AUTO_TRIG, 279 WMI_MAIN_SERVICE_STA_UAPSD_VAR_AUTO_TRIG, 280 WMI_MAIN_SERVICE_STA_KEEP_ALIVE, 281 WMI_MAIN_SERVICE_TX_ENCAP, 282 }; 283 284 enum wmi_10_4_service { 285 WMI_10_4_SERVICE_BEACON_OFFLOAD = 0, 286 WMI_10_4_SERVICE_SCAN_OFFLOAD, 287 WMI_10_4_SERVICE_ROAM_OFFLOAD, 288 WMI_10_4_SERVICE_BCN_MISS_OFFLOAD, 289 WMI_10_4_SERVICE_STA_PWRSAVE, 290 WMI_10_4_SERVICE_STA_ADVANCED_PWRSAVE, 291 WMI_10_4_SERVICE_AP_UAPSD, 292 WMI_10_4_SERVICE_AP_DFS, 293 WMI_10_4_SERVICE_11AC, 294 WMI_10_4_SERVICE_BLOCKACK, 295 WMI_10_4_SERVICE_PHYERR, 296 WMI_10_4_SERVICE_BCN_FILTER, 297 WMI_10_4_SERVICE_RTT, 298 WMI_10_4_SERVICE_RATECTRL, 299 WMI_10_4_SERVICE_WOW, 300 WMI_10_4_SERVICE_RATECTRL_CACHE, 301 WMI_10_4_SERVICE_IRAM_TIDS, 302 WMI_10_4_SERVICE_BURST, 303 WMI_10_4_SERVICE_SMART_ANTENNA_SW_SUPPORT, 304 WMI_10_4_SERVICE_GTK_OFFLOAD, 305 WMI_10_4_SERVICE_SCAN_SCH, 306 WMI_10_4_SERVICE_CSA_OFFLOAD, 307 WMI_10_4_SERVICE_CHATTER, 308 WMI_10_4_SERVICE_COEX_FREQAVOID, 309 WMI_10_4_SERVICE_PACKET_POWER_SAVE, 310 WMI_10_4_SERVICE_FORCE_FW_HANG, 311 WMI_10_4_SERVICE_SMART_ANTENNA_HW_SUPPORT, 312 WMI_10_4_SERVICE_GPIO, 313 WMI_10_4_SERVICE_STA_UAPSD_BASIC_AUTO_TRIG, 314 WMI_10_4_SERVICE_STA_UAPSD_VAR_AUTO_TRIG, 315 WMI_10_4_SERVICE_STA_KEEP_ALIVE, 316 WMI_10_4_SERVICE_TX_ENCAP, 317 WMI_10_4_SERVICE_AP_PS_DETECT_OUT_OF_SYNC, 318 WMI_10_4_SERVICE_EARLY_RX, 319 WMI_10_4_SERVICE_ENHANCED_PROXY_STA, 320 WMI_10_4_SERVICE_TT, 321 WMI_10_4_SERVICE_ATF, 322 WMI_10_4_SERVICE_PEER_CACHING, 323 WMI_10_4_SERVICE_COEX_GPIO, 324 WMI_10_4_SERVICE_AUX_SPECTRAL_INTF, 325 WMI_10_4_SERVICE_AUX_CHAN_LOAD_INTF, 326 WMI_10_4_SERVICE_BSS_CHANNEL_INFO_64, 327 WMI_10_4_SERVICE_EXT_RES_CFG_SUPPORT, 328 WMI_10_4_SERVICE_MESH_NON_11S, 329 WMI_10_4_SERVICE_RESTRT_CHNL_SUPPORT, 330 WMI_10_4_SERVICE_PEER_STATS, 331 WMI_10_4_SERVICE_MESH_11S, 332 WMI_10_4_SERVICE_PERIODIC_CHAN_STAT_SUPPORT, 333 WMI_10_4_SERVICE_TX_MODE_PUSH_ONLY, 334 WMI_10_4_SERVICE_TX_MODE_PUSH_PULL, 335 WMI_10_4_SERVICE_TX_MODE_DYNAMIC, 336 WMI_10_4_SERVICE_VDEV_RX_FILTER, 337 WMI_10_4_SERVICE_BTCOEX, 338 WMI_10_4_SERVICE_CHECK_CAL_VERSION, 339 WMI_10_4_SERVICE_DBGLOG_WARN2, 340 WMI_10_4_SERVICE_BTCOEX_DUTY_CYCLE, 341 WMI_10_4_SERVICE_4_WIRE_COEX_SUPPORT, 342 WMI_10_4_SERVICE_EXTENDED_NSS_SUPPORT, 343 WMI_10_4_SERVICE_PROG_GPIO_BAND_SELECT, 344 WMI_10_4_SERVICE_SMART_LOGGING_SUPPORT, 345 WMI_10_4_SERVICE_TDLS, 346 WMI_10_4_SERVICE_TDLS_OFFCHAN, 347 WMI_10_4_SERVICE_TDLS_UAPSD_BUFFER_STA, 348 WMI_10_4_SERVICE_TDLS_UAPSD_SLEEP_STA, 349 WMI_10_4_SERVICE_TDLS_CONN_TRACKER_IN_HOST_MODE, 350 WMI_10_4_SERVICE_TDLS_EXPLICIT_MODE_ONLY, 351 WMI_10_4_SERVICE_TDLS_WIDER_BANDWIDTH, 352 WMI_10_4_SERVICE_HTT_MGMT_TX_COMP_VALID_FLAGS, 353 WMI_10_4_SERVICE_HOST_DFS_CHECK_SUPPORT, 354 WMI_10_4_SERVICE_TPC_STATS_FINAL, 355 WMI_10_4_SERVICE_CFR_CAPTURE_SUPPORT, 356 WMI_10_4_SERVICE_TX_DATA_ACK_RSSI, 357 WMI_10_4_SERVICE_CFR_CAPTURE_IND_MSG_TYPE_LEGACY, 358 WMI_10_4_SERVICE_PER_PACKET_SW_ENCRYPT, 359 WMI_10_4_SERVICE_PEER_TID_CONFIGS_SUPPORT, 360 WMI_10_4_SERVICE_VDEV_BCN_RATE_CONTROL, 361 WMI_10_4_SERVICE_VDEV_DIFFERENT_BEACON_INTERVAL_SUPPORT, 362 }; 363 364 static inline char *wmi_service_name(int service_id) 365 { 366 #define SVCSTR(x) case x: return #x 367 368 switch (service_id) { 369 SVCSTR(WMI_SERVICE_BEACON_OFFLOAD); 370 SVCSTR(WMI_SERVICE_SCAN_OFFLOAD); 371 SVCSTR(WMI_SERVICE_ROAM_OFFLOAD); 372 SVCSTR(WMI_SERVICE_BCN_MISS_OFFLOAD); 373 SVCSTR(WMI_SERVICE_STA_PWRSAVE); 374 SVCSTR(WMI_SERVICE_STA_ADVANCED_PWRSAVE); 375 SVCSTR(WMI_SERVICE_AP_UAPSD); 376 SVCSTR(WMI_SERVICE_AP_DFS); 377 SVCSTR(WMI_SERVICE_11AC); 378 SVCSTR(WMI_SERVICE_BLOCKACK); 379 SVCSTR(WMI_SERVICE_PHYERR); 380 SVCSTR(WMI_SERVICE_BCN_FILTER); 381 SVCSTR(WMI_SERVICE_RTT); 382 SVCSTR(WMI_SERVICE_RATECTRL); 383 SVCSTR(WMI_SERVICE_WOW); 384 SVCSTR(WMI_SERVICE_RATECTRL_CACHE); 385 SVCSTR(WMI_SERVICE_IRAM_TIDS); 386 SVCSTR(WMI_SERVICE_ARPNS_OFFLOAD); 387 SVCSTR(WMI_SERVICE_NLO); 388 SVCSTR(WMI_SERVICE_GTK_OFFLOAD); 389 SVCSTR(WMI_SERVICE_SCAN_SCH); 390 SVCSTR(WMI_SERVICE_CSA_OFFLOAD); 391 SVCSTR(WMI_SERVICE_CHATTER); 392 SVCSTR(WMI_SERVICE_COEX_FREQAVOID); 393 SVCSTR(WMI_SERVICE_PACKET_POWER_SAVE); 394 SVCSTR(WMI_SERVICE_FORCE_FW_HANG); 395 SVCSTR(WMI_SERVICE_GPIO); 396 SVCSTR(WMI_SERVICE_STA_DTIM_PS_MODULATED_DTIM); 397 SVCSTR(WMI_SERVICE_STA_UAPSD_BASIC_AUTO_TRIG); 398 SVCSTR(WMI_SERVICE_STA_UAPSD_VAR_AUTO_TRIG); 399 SVCSTR(WMI_SERVICE_STA_KEEP_ALIVE); 400 SVCSTR(WMI_SERVICE_TX_ENCAP); 401 SVCSTR(WMI_SERVICE_BURST); 402 SVCSTR(WMI_SERVICE_SMART_ANTENNA_SW_SUPPORT); 403 SVCSTR(WMI_SERVICE_SMART_ANTENNA_HW_SUPPORT); 404 SVCSTR(WMI_SERVICE_ROAM_SCAN_OFFLOAD); 405 SVCSTR(WMI_SERVICE_AP_PS_DETECT_OUT_OF_SYNC); 406 SVCSTR(WMI_SERVICE_EARLY_RX); 407 SVCSTR(WMI_SERVICE_STA_SMPS); 408 SVCSTR(WMI_SERVICE_FWTEST); 409 SVCSTR(WMI_SERVICE_STA_WMMAC); 410 SVCSTR(WMI_SERVICE_TDLS); 411 SVCSTR(WMI_SERVICE_MCC_BCN_INTERVAL_CHANGE); 412 SVCSTR(WMI_SERVICE_ADAPTIVE_OCS); 413 SVCSTR(WMI_SERVICE_BA_SSN_SUPPORT); 414 SVCSTR(WMI_SERVICE_FILTER_IPSEC_NATKEEPALIVE); 415 SVCSTR(WMI_SERVICE_WLAN_HB); 416 SVCSTR(WMI_SERVICE_LTE_ANT_SHARE_SUPPORT); 417 SVCSTR(WMI_SERVICE_BATCH_SCAN); 418 SVCSTR(WMI_SERVICE_QPOWER); 419 SVCSTR(WMI_SERVICE_PLMREQ); 420 SVCSTR(WMI_SERVICE_THERMAL_MGMT); 421 SVCSTR(WMI_SERVICE_RMC); 422 SVCSTR(WMI_SERVICE_MHF_OFFLOAD); 423 SVCSTR(WMI_SERVICE_COEX_SAR); 424 SVCSTR(WMI_SERVICE_BCN_TXRATE_OVERRIDE); 425 SVCSTR(WMI_SERVICE_NAN); 426 SVCSTR(WMI_SERVICE_L1SS_STAT); 427 SVCSTR(WMI_SERVICE_ESTIMATE_LINKSPEED); 428 SVCSTR(WMI_SERVICE_OBSS_SCAN); 429 SVCSTR(WMI_SERVICE_TDLS_OFFCHAN); 430 SVCSTR(WMI_SERVICE_TDLS_UAPSD_BUFFER_STA); 431 SVCSTR(WMI_SERVICE_TDLS_UAPSD_SLEEP_STA); 432 SVCSTR(WMI_SERVICE_IBSS_PWRSAVE); 433 SVCSTR(WMI_SERVICE_LPASS); 434 SVCSTR(WMI_SERVICE_EXTSCAN); 435 SVCSTR(WMI_SERVICE_D0WOW); 436 SVCSTR(WMI_SERVICE_HSOFFLOAD); 437 SVCSTR(WMI_SERVICE_ROAM_HO_OFFLOAD); 438 SVCSTR(WMI_SERVICE_RX_FULL_REORDER); 439 SVCSTR(WMI_SERVICE_DHCP_OFFLOAD); 440 SVCSTR(WMI_SERVICE_STA_RX_IPA_OFFLOAD_SUPPORT); 441 SVCSTR(WMI_SERVICE_MDNS_OFFLOAD); 442 SVCSTR(WMI_SERVICE_SAP_AUTH_OFFLOAD); 443 SVCSTR(WMI_SERVICE_ATF); 444 SVCSTR(WMI_SERVICE_COEX_GPIO); 445 SVCSTR(WMI_SERVICE_ENHANCED_PROXY_STA); 446 SVCSTR(WMI_SERVICE_TT); 447 SVCSTR(WMI_SERVICE_PEER_CACHING); 448 SVCSTR(WMI_SERVICE_AUX_SPECTRAL_INTF); 449 SVCSTR(WMI_SERVICE_AUX_CHAN_LOAD_INTF); 450 SVCSTR(WMI_SERVICE_BSS_CHANNEL_INFO_64); 451 SVCSTR(WMI_SERVICE_EXT_RES_CFG_SUPPORT); 452 SVCSTR(WMI_SERVICE_MESH_11S); 453 SVCSTR(WMI_SERVICE_MESH_NON_11S); 454 SVCSTR(WMI_SERVICE_PEER_STATS); 455 SVCSTR(WMI_SERVICE_RESTRT_CHNL_SUPPORT); 456 SVCSTR(WMI_SERVICE_PERIODIC_CHAN_STAT_SUPPORT); 457 SVCSTR(WMI_SERVICE_TX_MODE_PUSH_ONLY); 458 SVCSTR(WMI_SERVICE_TX_MODE_PUSH_PULL); 459 SVCSTR(WMI_SERVICE_TX_MODE_DYNAMIC); 460 SVCSTR(WMI_SERVICE_VDEV_RX_FILTER); 461 SVCSTR(WMI_SERVICE_CHECK_CAL_VERSION); 462 SVCSTR(WMI_SERVICE_DBGLOG_WARN2); 463 SVCSTR(WMI_SERVICE_BTCOEX_DUTY_CYCLE); 464 SVCSTR(WMI_SERVICE_4_WIRE_COEX_SUPPORT); 465 SVCSTR(WMI_SERVICE_EXTENDED_NSS_SUPPORT); 466 SVCSTR(WMI_SERVICE_PROG_GPIO_BAND_SELECT); 467 SVCSTR(WMI_SERVICE_SMART_LOGGING_SUPPORT); 468 SVCSTR(WMI_SERVICE_TDLS_CONN_TRACKER_IN_HOST_MODE); 469 SVCSTR(WMI_SERVICE_TDLS_EXPLICIT_MODE_ONLY); 470 SVCSTR(WMI_SERVICE_TDLS_WIDER_BANDWIDTH); 471 SVCSTR(WMI_SERVICE_HTT_MGMT_TX_COMP_VALID_FLAGS); 472 SVCSTR(WMI_SERVICE_HOST_DFS_CHECK_SUPPORT); 473 SVCSTR(WMI_SERVICE_TPC_STATS_FINAL); 474 SVCSTR(WMI_SERVICE_RESET_CHIP); 475 SVCSTR(WMI_SERVICE_TX_DATA_ACK_RSSI); 476 SVCSTR(WMI_SERVICE_VDEV_DIFFERENT_BEACON_INTERVAL_SUPPORT); 477 default: 478 return NULL; 479 } 480 481 #undef SVCSTR 482 } 483 484 #define WMI_SERVICE_IS_ENABLED(wmi_svc_bmap, svc_id, len) \ 485 ((svc_id) < (len) && \ 486 __le32_to_cpu((wmi_svc_bmap)[(svc_id) / (sizeof(u32))]) & \ 487 BIT((svc_id) % (sizeof(u32)))) 488 489 /* This extension is required to accommodate new services, current limit 490 * for wmi_services is 64 as target is using only 4-bits of each 32-bit 491 * wmi_service word. Extending this to make use of remaining unused bits 492 * for new services. 493 */ 494 #define WMI_EXT_SERVICE_IS_ENABLED(wmi_svc_bmap, svc_id, len) \ 495 ((svc_id) >= (len) && \ 496 __le32_to_cpu((wmi_svc_bmap)[((svc_id) - (len)) / 28]) & \ 497 BIT(((((svc_id) - (len)) % 28) & 0x1f) + 4)) 498 499 #define SVCMAP(x, y, len) \ 500 do { \ 501 if ((WMI_SERVICE_IS_ENABLED((in), (x), (len))) || \ 502 (WMI_EXT_SERVICE_IS_ENABLED((in), (x), (len)))) \ 503 __set_bit(y, out); \ 504 } while (0) 505 506 static inline void wmi_10x_svc_map(const __le32 *in, unsigned long *out, 507 size_t len) 508 { 509 SVCMAP(WMI_10X_SERVICE_BEACON_OFFLOAD, 510 WMI_SERVICE_BEACON_OFFLOAD, len); 511 SVCMAP(WMI_10X_SERVICE_SCAN_OFFLOAD, 512 WMI_SERVICE_SCAN_OFFLOAD, len); 513 SVCMAP(WMI_10X_SERVICE_ROAM_OFFLOAD, 514 WMI_SERVICE_ROAM_OFFLOAD, len); 515 SVCMAP(WMI_10X_SERVICE_BCN_MISS_OFFLOAD, 516 WMI_SERVICE_BCN_MISS_OFFLOAD, len); 517 SVCMAP(WMI_10X_SERVICE_STA_PWRSAVE, 518 WMI_SERVICE_STA_PWRSAVE, len); 519 SVCMAP(WMI_10X_SERVICE_STA_ADVANCED_PWRSAVE, 520 WMI_SERVICE_STA_ADVANCED_PWRSAVE, len); 521 SVCMAP(WMI_10X_SERVICE_AP_UAPSD, 522 WMI_SERVICE_AP_UAPSD, len); 523 SVCMAP(WMI_10X_SERVICE_AP_DFS, 524 WMI_SERVICE_AP_DFS, len); 525 SVCMAP(WMI_10X_SERVICE_11AC, 526 WMI_SERVICE_11AC, len); 527 SVCMAP(WMI_10X_SERVICE_BLOCKACK, 528 WMI_SERVICE_BLOCKACK, len); 529 SVCMAP(WMI_10X_SERVICE_PHYERR, 530 WMI_SERVICE_PHYERR, len); 531 SVCMAP(WMI_10X_SERVICE_BCN_FILTER, 532 WMI_SERVICE_BCN_FILTER, len); 533 SVCMAP(WMI_10X_SERVICE_RTT, 534 WMI_SERVICE_RTT, len); 535 SVCMAP(WMI_10X_SERVICE_RATECTRL, 536 WMI_SERVICE_RATECTRL, len); 537 SVCMAP(WMI_10X_SERVICE_WOW, 538 WMI_SERVICE_WOW, len); 539 SVCMAP(WMI_10X_SERVICE_RATECTRL_CACHE, 540 WMI_SERVICE_RATECTRL_CACHE, len); 541 SVCMAP(WMI_10X_SERVICE_IRAM_TIDS, 542 WMI_SERVICE_IRAM_TIDS, len); 543 SVCMAP(WMI_10X_SERVICE_BURST, 544 WMI_SERVICE_BURST, len); 545 SVCMAP(WMI_10X_SERVICE_SMART_ANTENNA_SW_SUPPORT, 546 WMI_SERVICE_SMART_ANTENNA_SW_SUPPORT, len); 547 SVCMAP(WMI_10X_SERVICE_FORCE_FW_HANG, 548 WMI_SERVICE_FORCE_FW_HANG, len); 549 SVCMAP(WMI_10X_SERVICE_SMART_ANTENNA_HW_SUPPORT, 550 WMI_SERVICE_SMART_ANTENNA_HW_SUPPORT, len); 551 SVCMAP(WMI_10X_SERVICE_ATF, 552 WMI_SERVICE_ATF, len); 553 SVCMAP(WMI_10X_SERVICE_COEX_GPIO, 554 WMI_SERVICE_COEX_GPIO, len); 555 SVCMAP(WMI_10X_SERVICE_AUX_SPECTRAL_INTF, 556 WMI_SERVICE_AUX_SPECTRAL_INTF, len); 557 SVCMAP(WMI_10X_SERVICE_AUX_CHAN_LOAD_INTF, 558 WMI_SERVICE_AUX_CHAN_LOAD_INTF, len); 559 SVCMAP(WMI_10X_SERVICE_BSS_CHANNEL_INFO_64, 560 WMI_SERVICE_BSS_CHANNEL_INFO_64, len); 561 SVCMAP(WMI_10X_SERVICE_MESH, 562 WMI_SERVICE_MESH_11S, len); 563 SVCMAP(WMI_10X_SERVICE_EXT_RES_CFG_SUPPORT, 564 WMI_SERVICE_EXT_RES_CFG_SUPPORT, len); 565 SVCMAP(WMI_10X_SERVICE_PEER_STATS, 566 WMI_SERVICE_PEER_STATS, len); 567 SVCMAP(WMI_10X_SERVICE_RESET_CHIP, 568 WMI_SERVICE_RESET_CHIP, len); 569 SVCMAP(WMI_10X_SERVICE_HTT_MGMT_TX_COMP_VALID_FLAGS, 570 WMI_SERVICE_HTT_MGMT_TX_COMP_VALID_FLAGS, len); 571 } 572 573 static inline void wmi_main_svc_map(const __le32 *in, unsigned long *out, 574 size_t len) 575 { 576 SVCMAP(WMI_MAIN_SERVICE_BEACON_OFFLOAD, 577 WMI_SERVICE_BEACON_OFFLOAD, len); 578 SVCMAP(WMI_MAIN_SERVICE_SCAN_OFFLOAD, 579 WMI_SERVICE_SCAN_OFFLOAD, len); 580 SVCMAP(WMI_MAIN_SERVICE_ROAM_OFFLOAD, 581 WMI_SERVICE_ROAM_OFFLOAD, len); 582 SVCMAP(WMI_MAIN_SERVICE_BCN_MISS_OFFLOAD, 583 WMI_SERVICE_BCN_MISS_OFFLOAD, len); 584 SVCMAP(WMI_MAIN_SERVICE_STA_PWRSAVE, 585 WMI_SERVICE_STA_PWRSAVE, len); 586 SVCMAP(WMI_MAIN_SERVICE_STA_ADVANCED_PWRSAVE, 587 WMI_SERVICE_STA_ADVANCED_PWRSAVE, len); 588 SVCMAP(WMI_MAIN_SERVICE_AP_UAPSD, 589 WMI_SERVICE_AP_UAPSD, len); 590 SVCMAP(WMI_MAIN_SERVICE_AP_DFS, 591 WMI_SERVICE_AP_DFS, len); 592 SVCMAP(WMI_MAIN_SERVICE_11AC, 593 WMI_SERVICE_11AC, len); 594 SVCMAP(WMI_MAIN_SERVICE_BLOCKACK, 595 WMI_SERVICE_BLOCKACK, len); 596 SVCMAP(WMI_MAIN_SERVICE_PHYERR, 597 WMI_SERVICE_PHYERR, len); 598 SVCMAP(WMI_MAIN_SERVICE_BCN_FILTER, 599 WMI_SERVICE_BCN_FILTER, len); 600 SVCMAP(WMI_MAIN_SERVICE_RTT, 601 WMI_SERVICE_RTT, len); 602 SVCMAP(WMI_MAIN_SERVICE_RATECTRL, 603 WMI_SERVICE_RATECTRL, len); 604 SVCMAP(WMI_MAIN_SERVICE_WOW, 605 WMI_SERVICE_WOW, len); 606 SVCMAP(WMI_MAIN_SERVICE_RATECTRL_CACHE, 607 WMI_SERVICE_RATECTRL_CACHE, len); 608 SVCMAP(WMI_MAIN_SERVICE_IRAM_TIDS, 609 WMI_SERVICE_IRAM_TIDS, len); 610 SVCMAP(WMI_MAIN_SERVICE_ARPNS_OFFLOAD, 611 WMI_SERVICE_ARPNS_OFFLOAD, len); 612 SVCMAP(WMI_MAIN_SERVICE_NLO, 613 WMI_SERVICE_NLO, len); 614 SVCMAP(WMI_MAIN_SERVICE_GTK_OFFLOAD, 615 WMI_SERVICE_GTK_OFFLOAD, len); 616 SVCMAP(WMI_MAIN_SERVICE_SCAN_SCH, 617 WMI_SERVICE_SCAN_SCH, len); 618 SVCMAP(WMI_MAIN_SERVICE_CSA_OFFLOAD, 619 WMI_SERVICE_CSA_OFFLOAD, len); 620 SVCMAP(WMI_MAIN_SERVICE_CHATTER, 621 WMI_SERVICE_CHATTER, len); 622 SVCMAP(WMI_MAIN_SERVICE_COEX_FREQAVOID, 623 WMI_SERVICE_COEX_FREQAVOID, len); 624 SVCMAP(WMI_MAIN_SERVICE_PACKET_POWER_SAVE, 625 WMI_SERVICE_PACKET_POWER_SAVE, len); 626 SVCMAP(WMI_MAIN_SERVICE_FORCE_FW_HANG, 627 WMI_SERVICE_FORCE_FW_HANG, len); 628 SVCMAP(WMI_MAIN_SERVICE_GPIO, 629 WMI_SERVICE_GPIO, len); 630 SVCMAP(WMI_MAIN_SERVICE_STA_DTIM_PS_MODULATED_DTIM, 631 WMI_SERVICE_STA_DTIM_PS_MODULATED_DTIM, len); 632 SVCMAP(WMI_MAIN_SERVICE_STA_UAPSD_BASIC_AUTO_TRIG, 633 WMI_SERVICE_STA_UAPSD_BASIC_AUTO_TRIG, len); 634 SVCMAP(WMI_MAIN_SERVICE_STA_UAPSD_VAR_AUTO_TRIG, 635 WMI_SERVICE_STA_UAPSD_VAR_AUTO_TRIG, len); 636 SVCMAP(WMI_MAIN_SERVICE_STA_KEEP_ALIVE, 637 WMI_SERVICE_STA_KEEP_ALIVE, len); 638 SVCMAP(WMI_MAIN_SERVICE_TX_ENCAP, 639 WMI_SERVICE_TX_ENCAP, len); 640 } 641 642 static inline void wmi_10_4_svc_map(const __le32 *in, unsigned long *out, 643 size_t len) 644 { 645 SVCMAP(WMI_10_4_SERVICE_BEACON_OFFLOAD, 646 WMI_SERVICE_BEACON_OFFLOAD, len); 647 SVCMAP(WMI_10_4_SERVICE_SCAN_OFFLOAD, 648 WMI_SERVICE_SCAN_OFFLOAD, len); 649 SVCMAP(WMI_10_4_SERVICE_ROAM_OFFLOAD, 650 WMI_SERVICE_ROAM_OFFLOAD, len); 651 SVCMAP(WMI_10_4_SERVICE_BCN_MISS_OFFLOAD, 652 WMI_SERVICE_BCN_MISS_OFFLOAD, len); 653 SVCMAP(WMI_10_4_SERVICE_STA_PWRSAVE, 654 WMI_SERVICE_STA_PWRSAVE, len); 655 SVCMAP(WMI_10_4_SERVICE_STA_ADVANCED_PWRSAVE, 656 WMI_SERVICE_STA_ADVANCED_PWRSAVE, len); 657 SVCMAP(WMI_10_4_SERVICE_AP_UAPSD, 658 WMI_SERVICE_AP_UAPSD, len); 659 SVCMAP(WMI_10_4_SERVICE_AP_DFS, 660 WMI_SERVICE_AP_DFS, len); 661 SVCMAP(WMI_10_4_SERVICE_11AC, 662 WMI_SERVICE_11AC, len); 663 SVCMAP(WMI_10_4_SERVICE_BLOCKACK, 664 WMI_SERVICE_BLOCKACK, len); 665 SVCMAP(WMI_10_4_SERVICE_PHYERR, 666 WMI_SERVICE_PHYERR, len); 667 SVCMAP(WMI_10_4_SERVICE_BCN_FILTER, 668 WMI_SERVICE_BCN_FILTER, len); 669 SVCMAP(WMI_10_4_SERVICE_RTT, 670 WMI_SERVICE_RTT, len); 671 SVCMAP(WMI_10_4_SERVICE_RATECTRL, 672 WMI_SERVICE_RATECTRL, len); 673 SVCMAP(WMI_10_4_SERVICE_WOW, 674 WMI_SERVICE_WOW, len); 675 SVCMAP(WMI_10_4_SERVICE_RATECTRL_CACHE, 676 WMI_SERVICE_RATECTRL_CACHE, len); 677 SVCMAP(WMI_10_4_SERVICE_IRAM_TIDS, 678 WMI_SERVICE_IRAM_TIDS, len); 679 SVCMAP(WMI_10_4_SERVICE_BURST, 680 WMI_SERVICE_BURST, len); 681 SVCMAP(WMI_10_4_SERVICE_SMART_ANTENNA_SW_SUPPORT, 682 WMI_SERVICE_SMART_ANTENNA_SW_SUPPORT, len); 683 SVCMAP(WMI_10_4_SERVICE_GTK_OFFLOAD, 684 WMI_SERVICE_GTK_OFFLOAD, len); 685 SVCMAP(WMI_10_4_SERVICE_SCAN_SCH, 686 WMI_SERVICE_SCAN_SCH, len); 687 SVCMAP(WMI_10_4_SERVICE_CSA_OFFLOAD, 688 WMI_SERVICE_CSA_OFFLOAD, len); 689 SVCMAP(WMI_10_4_SERVICE_CHATTER, 690 WMI_SERVICE_CHATTER, len); 691 SVCMAP(WMI_10_4_SERVICE_COEX_FREQAVOID, 692 WMI_SERVICE_COEX_FREQAVOID, len); 693 SVCMAP(WMI_10_4_SERVICE_PACKET_POWER_SAVE, 694 WMI_SERVICE_PACKET_POWER_SAVE, len); 695 SVCMAP(WMI_10_4_SERVICE_FORCE_FW_HANG, 696 WMI_SERVICE_FORCE_FW_HANG, len); 697 SVCMAP(WMI_10_4_SERVICE_SMART_ANTENNA_HW_SUPPORT, 698 WMI_SERVICE_SMART_ANTENNA_HW_SUPPORT, len); 699 SVCMAP(WMI_10_4_SERVICE_GPIO, 700 WMI_SERVICE_GPIO, len); 701 SVCMAP(WMI_10_4_SERVICE_STA_UAPSD_BASIC_AUTO_TRIG, 702 WMI_SERVICE_STA_UAPSD_BASIC_AUTO_TRIG, len); 703 SVCMAP(WMI_10_4_SERVICE_STA_UAPSD_VAR_AUTO_TRIG, 704 WMI_SERVICE_STA_UAPSD_VAR_AUTO_TRIG, len); 705 SVCMAP(WMI_10_4_SERVICE_STA_KEEP_ALIVE, 706 WMI_SERVICE_STA_KEEP_ALIVE, len); 707 SVCMAP(WMI_10_4_SERVICE_TX_ENCAP, 708 WMI_SERVICE_TX_ENCAP, len); 709 SVCMAP(WMI_10_4_SERVICE_AP_PS_DETECT_OUT_OF_SYNC, 710 WMI_SERVICE_AP_PS_DETECT_OUT_OF_SYNC, len); 711 SVCMAP(WMI_10_4_SERVICE_EARLY_RX, 712 WMI_SERVICE_EARLY_RX, len); 713 SVCMAP(WMI_10_4_SERVICE_ENHANCED_PROXY_STA, 714 WMI_SERVICE_ENHANCED_PROXY_STA, len); 715 SVCMAP(WMI_10_4_SERVICE_TT, 716 WMI_SERVICE_TT, len); 717 SVCMAP(WMI_10_4_SERVICE_ATF, 718 WMI_SERVICE_ATF, len); 719 SVCMAP(WMI_10_4_SERVICE_PEER_CACHING, 720 WMI_SERVICE_PEER_CACHING, len); 721 SVCMAP(WMI_10_4_SERVICE_COEX_GPIO, 722 WMI_SERVICE_COEX_GPIO, len); 723 SVCMAP(WMI_10_4_SERVICE_AUX_SPECTRAL_INTF, 724 WMI_SERVICE_AUX_SPECTRAL_INTF, len); 725 SVCMAP(WMI_10_4_SERVICE_AUX_CHAN_LOAD_INTF, 726 WMI_SERVICE_AUX_CHAN_LOAD_INTF, len); 727 SVCMAP(WMI_10_4_SERVICE_BSS_CHANNEL_INFO_64, 728 WMI_SERVICE_BSS_CHANNEL_INFO_64, len); 729 SVCMAP(WMI_10_4_SERVICE_EXT_RES_CFG_SUPPORT, 730 WMI_SERVICE_EXT_RES_CFG_SUPPORT, len); 731 SVCMAP(WMI_10_4_SERVICE_MESH_NON_11S, 732 WMI_SERVICE_MESH_NON_11S, len); 733 SVCMAP(WMI_10_4_SERVICE_RESTRT_CHNL_SUPPORT, 734 WMI_SERVICE_RESTRT_CHNL_SUPPORT, len); 735 SVCMAP(WMI_10_4_SERVICE_PEER_STATS, 736 WMI_SERVICE_PEER_STATS, len); 737 SVCMAP(WMI_10_4_SERVICE_MESH_11S, 738 WMI_SERVICE_MESH_11S, len); 739 SVCMAP(WMI_10_4_SERVICE_PERIODIC_CHAN_STAT_SUPPORT, 740 WMI_SERVICE_PERIODIC_CHAN_STAT_SUPPORT, len); 741 SVCMAP(WMI_10_4_SERVICE_TX_MODE_PUSH_ONLY, 742 WMI_SERVICE_TX_MODE_PUSH_ONLY, len); 743 SVCMAP(WMI_10_4_SERVICE_TX_MODE_PUSH_PULL, 744 WMI_SERVICE_TX_MODE_PUSH_PULL, len); 745 SVCMAP(WMI_10_4_SERVICE_TX_MODE_DYNAMIC, 746 WMI_SERVICE_TX_MODE_DYNAMIC, len); 747 SVCMAP(WMI_10_4_SERVICE_VDEV_RX_FILTER, 748 WMI_SERVICE_VDEV_RX_FILTER, len); 749 SVCMAP(WMI_10_4_SERVICE_BTCOEX, 750 WMI_SERVICE_BTCOEX, len); 751 SVCMAP(WMI_10_4_SERVICE_CHECK_CAL_VERSION, 752 WMI_SERVICE_CHECK_CAL_VERSION, len); 753 SVCMAP(WMI_10_4_SERVICE_DBGLOG_WARN2, 754 WMI_SERVICE_DBGLOG_WARN2, len); 755 SVCMAP(WMI_10_4_SERVICE_BTCOEX_DUTY_CYCLE, 756 WMI_SERVICE_BTCOEX_DUTY_CYCLE, len); 757 SVCMAP(WMI_10_4_SERVICE_4_WIRE_COEX_SUPPORT, 758 WMI_SERVICE_4_WIRE_COEX_SUPPORT, len); 759 SVCMAP(WMI_10_4_SERVICE_EXTENDED_NSS_SUPPORT, 760 WMI_SERVICE_EXTENDED_NSS_SUPPORT, len); 761 SVCMAP(WMI_10_4_SERVICE_PROG_GPIO_BAND_SELECT, 762 WMI_SERVICE_PROG_GPIO_BAND_SELECT, len); 763 SVCMAP(WMI_10_4_SERVICE_SMART_LOGGING_SUPPORT, 764 WMI_SERVICE_SMART_LOGGING_SUPPORT, len); 765 SVCMAP(WMI_10_4_SERVICE_TDLS, 766 WMI_SERVICE_TDLS, len); 767 SVCMAP(WMI_10_4_SERVICE_TDLS_OFFCHAN, 768 WMI_SERVICE_TDLS_OFFCHAN, len); 769 SVCMAP(WMI_10_4_SERVICE_TDLS_UAPSD_BUFFER_STA, 770 WMI_SERVICE_TDLS_UAPSD_BUFFER_STA, len); 771 SVCMAP(WMI_10_4_SERVICE_TDLS_UAPSD_SLEEP_STA, 772 WMI_SERVICE_TDLS_UAPSD_SLEEP_STA, len); 773 SVCMAP(WMI_10_4_SERVICE_TDLS_CONN_TRACKER_IN_HOST_MODE, 774 WMI_SERVICE_TDLS_CONN_TRACKER_IN_HOST_MODE, len); 775 SVCMAP(WMI_10_4_SERVICE_TDLS_EXPLICIT_MODE_ONLY, 776 WMI_SERVICE_TDLS_EXPLICIT_MODE_ONLY, len); 777 SVCMAP(WMI_10_4_SERVICE_TDLS_WIDER_BANDWIDTH, 778 WMI_SERVICE_TDLS_WIDER_BANDWIDTH, len); 779 SVCMAP(WMI_10_4_SERVICE_HTT_MGMT_TX_COMP_VALID_FLAGS, 780 WMI_SERVICE_HTT_MGMT_TX_COMP_VALID_FLAGS, len); 781 SVCMAP(WMI_10_4_SERVICE_HOST_DFS_CHECK_SUPPORT, 782 WMI_SERVICE_HOST_DFS_CHECK_SUPPORT, len); 783 SVCMAP(WMI_10_4_SERVICE_TPC_STATS_FINAL, 784 WMI_SERVICE_TPC_STATS_FINAL, len); 785 SVCMAP(WMI_10_4_SERVICE_TX_DATA_ACK_RSSI, 786 WMI_SERVICE_TX_DATA_ACK_RSSI, len); 787 SVCMAP(WMI_10_4_SERVICE_VDEV_DIFFERENT_BEACON_INTERVAL_SUPPORT, 788 WMI_SERVICE_VDEV_DIFFERENT_BEACON_INTERVAL_SUPPORT, len); 789 } 790 791 #undef SVCMAP 792 793 /* 2 word representation of MAC addr */ 794 struct wmi_mac_addr { 795 union { 796 u8 addr[6]; 797 struct { 798 u32 word0; 799 u32 word1; 800 } __packed; 801 } __packed; 802 } __packed; 803 804 struct wmi_cmd_map { 805 u32 init_cmdid; 806 u32 start_scan_cmdid; 807 u32 stop_scan_cmdid; 808 u32 scan_chan_list_cmdid; 809 u32 scan_sch_prio_tbl_cmdid; 810 u32 scan_prob_req_oui_cmdid; 811 u32 pdev_set_regdomain_cmdid; 812 u32 pdev_set_channel_cmdid; 813 u32 pdev_set_param_cmdid; 814 u32 pdev_pktlog_enable_cmdid; 815 u32 pdev_pktlog_disable_cmdid; 816 u32 pdev_set_wmm_params_cmdid; 817 u32 pdev_set_ht_cap_ie_cmdid; 818 u32 pdev_set_vht_cap_ie_cmdid; 819 u32 pdev_set_dscp_tid_map_cmdid; 820 u32 pdev_set_quiet_mode_cmdid; 821 u32 pdev_green_ap_ps_enable_cmdid; 822 u32 pdev_get_tpc_config_cmdid; 823 u32 pdev_set_base_macaddr_cmdid; 824 u32 vdev_create_cmdid; 825 u32 vdev_delete_cmdid; 826 u32 vdev_start_request_cmdid; 827 u32 vdev_restart_request_cmdid; 828 u32 vdev_up_cmdid; 829 u32 vdev_stop_cmdid; 830 u32 vdev_down_cmdid; 831 u32 vdev_set_param_cmdid; 832 u32 vdev_install_key_cmdid; 833 u32 peer_create_cmdid; 834 u32 peer_delete_cmdid; 835 u32 peer_flush_tids_cmdid; 836 u32 peer_set_param_cmdid; 837 u32 peer_assoc_cmdid; 838 u32 peer_add_wds_entry_cmdid; 839 u32 peer_remove_wds_entry_cmdid; 840 u32 peer_mcast_group_cmdid; 841 u32 bcn_tx_cmdid; 842 u32 pdev_send_bcn_cmdid; 843 u32 bcn_tmpl_cmdid; 844 u32 bcn_filter_rx_cmdid; 845 u32 prb_req_filter_rx_cmdid; 846 u32 mgmt_tx_cmdid; 847 u32 mgmt_tx_send_cmdid; 848 u32 prb_tmpl_cmdid; 849 u32 addba_clear_resp_cmdid; 850 u32 addba_send_cmdid; 851 u32 addba_status_cmdid; 852 u32 delba_send_cmdid; 853 u32 addba_set_resp_cmdid; 854 u32 send_singleamsdu_cmdid; 855 u32 sta_powersave_mode_cmdid; 856 u32 sta_powersave_param_cmdid; 857 u32 sta_mimo_ps_mode_cmdid; 858 u32 pdev_dfs_enable_cmdid; 859 u32 pdev_dfs_disable_cmdid; 860 u32 roam_scan_mode; 861 u32 roam_scan_rssi_threshold; 862 u32 roam_scan_period; 863 u32 roam_scan_rssi_change_threshold; 864 u32 roam_ap_profile; 865 u32 ofl_scan_add_ap_profile; 866 u32 ofl_scan_remove_ap_profile; 867 u32 ofl_scan_period; 868 u32 p2p_dev_set_device_info; 869 u32 p2p_dev_set_discoverability; 870 u32 p2p_go_set_beacon_ie; 871 u32 p2p_go_set_probe_resp_ie; 872 u32 p2p_set_vendor_ie_data_cmdid; 873 u32 ap_ps_peer_param_cmdid; 874 u32 ap_ps_peer_uapsd_coex_cmdid; 875 u32 peer_rate_retry_sched_cmdid; 876 u32 wlan_profile_trigger_cmdid; 877 u32 wlan_profile_set_hist_intvl_cmdid; 878 u32 wlan_profile_get_profile_data_cmdid; 879 u32 wlan_profile_enable_profile_id_cmdid; 880 u32 wlan_profile_list_profile_id_cmdid; 881 u32 pdev_suspend_cmdid; 882 u32 pdev_resume_cmdid; 883 u32 add_bcn_filter_cmdid; 884 u32 rmv_bcn_filter_cmdid; 885 u32 wow_add_wake_pattern_cmdid; 886 u32 wow_del_wake_pattern_cmdid; 887 u32 wow_enable_disable_wake_event_cmdid; 888 u32 wow_enable_cmdid; 889 u32 wow_hostwakeup_from_sleep_cmdid; 890 u32 rtt_measreq_cmdid; 891 u32 rtt_tsf_cmdid; 892 u32 vdev_spectral_scan_configure_cmdid; 893 u32 vdev_spectral_scan_enable_cmdid; 894 u32 request_stats_cmdid; 895 u32 set_arp_ns_offload_cmdid; 896 u32 network_list_offload_config_cmdid; 897 u32 gtk_offload_cmdid; 898 u32 csa_offload_enable_cmdid; 899 u32 csa_offload_chanswitch_cmdid; 900 u32 chatter_set_mode_cmdid; 901 u32 peer_tid_addba_cmdid; 902 u32 peer_tid_delba_cmdid; 903 u32 sta_dtim_ps_method_cmdid; 904 u32 sta_uapsd_auto_trig_cmdid; 905 u32 sta_keepalive_cmd; 906 u32 echo_cmdid; 907 u32 pdev_utf_cmdid; 908 u32 dbglog_cfg_cmdid; 909 u32 pdev_qvit_cmdid; 910 u32 pdev_ftm_intg_cmdid; 911 u32 vdev_set_keepalive_cmdid; 912 u32 vdev_get_keepalive_cmdid; 913 u32 force_fw_hang_cmdid; 914 u32 gpio_config_cmdid; 915 u32 gpio_output_cmdid; 916 u32 pdev_get_temperature_cmdid; 917 u32 vdev_set_wmm_params_cmdid; 918 u32 tdls_set_state_cmdid; 919 u32 tdls_peer_update_cmdid; 920 u32 adaptive_qcs_cmdid; 921 u32 scan_update_request_cmdid; 922 u32 vdev_standby_response_cmdid; 923 u32 vdev_resume_response_cmdid; 924 u32 wlan_peer_caching_add_peer_cmdid; 925 u32 wlan_peer_caching_evict_peer_cmdid; 926 u32 wlan_peer_caching_restore_peer_cmdid; 927 u32 wlan_peer_caching_print_all_peers_info_cmdid; 928 u32 peer_update_wds_entry_cmdid; 929 u32 peer_add_proxy_sta_entry_cmdid; 930 u32 rtt_keepalive_cmdid; 931 u32 oem_req_cmdid; 932 u32 nan_cmdid; 933 u32 vdev_ratemask_cmdid; 934 u32 qboost_cfg_cmdid; 935 u32 pdev_smart_ant_enable_cmdid; 936 u32 pdev_smart_ant_set_rx_antenna_cmdid; 937 u32 peer_smart_ant_set_tx_antenna_cmdid; 938 u32 peer_smart_ant_set_train_info_cmdid; 939 u32 peer_smart_ant_set_node_config_ops_cmdid; 940 u32 pdev_set_antenna_switch_table_cmdid; 941 u32 pdev_set_ctl_table_cmdid; 942 u32 pdev_set_mimogain_table_cmdid; 943 u32 pdev_ratepwr_table_cmdid; 944 u32 pdev_ratepwr_chainmsk_table_cmdid; 945 u32 pdev_fips_cmdid; 946 u32 tt_set_conf_cmdid; 947 u32 fwtest_cmdid; 948 u32 vdev_atf_request_cmdid; 949 u32 peer_atf_request_cmdid; 950 u32 pdev_get_ani_cck_config_cmdid; 951 u32 pdev_get_ani_ofdm_config_cmdid; 952 u32 pdev_reserve_ast_entry_cmdid; 953 u32 pdev_get_nfcal_power_cmdid; 954 u32 pdev_get_tpc_cmdid; 955 u32 pdev_get_ast_info_cmdid; 956 u32 vdev_set_dscp_tid_map_cmdid; 957 u32 pdev_get_info_cmdid; 958 u32 vdev_get_info_cmdid; 959 u32 vdev_filter_neighbor_rx_packets_cmdid; 960 u32 mu_cal_start_cmdid; 961 u32 set_cca_params_cmdid; 962 u32 pdev_bss_chan_info_request_cmdid; 963 u32 pdev_enable_adaptive_cca_cmdid; 964 u32 ext_resource_cfg_cmdid; 965 u32 vdev_set_ie_cmdid; 966 u32 set_lteu_config_cmdid; 967 u32 atf_ssid_grouping_request_cmdid; 968 u32 peer_atf_ext_request_cmdid; 969 u32 set_periodic_channel_stats_cfg_cmdid; 970 u32 peer_bwf_request_cmdid; 971 u32 btcoex_cfg_cmdid; 972 u32 peer_tx_mu_txmit_count_cmdid; 973 u32 peer_tx_mu_txmit_rstcnt_cmdid; 974 u32 peer_gid_userpos_list_cmdid; 975 u32 pdev_check_cal_version_cmdid; 976 u32 coex_version_cfg_cmid; 977 u32 pdev_get_rx_filter_cmdid; 978 u32 pdev_extended_nss_cfg_cmdid; 979 u32 vdev_set_scan_nac_rssi_cmdid; 980 u32 prog_gpio_band_select_cmdid; 981 u32 config_smart_logging_cmdid; 982 u32 debug_fatal_condition_cmdid; 983 u32 get_tsf_timer_cmdid; 984 u32 pdev_get_tpc_table_cmdid; 985 u32 vdev_sifs_trigger_time_cmdid; 986 u32 pdev_wds_entry_list_cmdid; 987 u32 tdls_set_offchan_mode_cmdid; 988 u32 radar_found_cmdid; 989 }; 990 991 /* 992 * wmi command groups. 993 */ 994 enum wmi_cmd_group { 995 /* 0 to 2 are reserved */ 996 WMI_GRP_START = 0x3, 997 WMI_GRP_SCAN = WMI_GRP_START, 998 WMI_GRP_PDEV, 999 WMI_GRP_VDEV, 1000 WMI_GRP_PEER, 1001 WMI_GRP_MGMT, 1002 WMI_GRP_BA_NEG, 1003 WMI_GRP_STA_PS, 1004 WMI_GRP_DFS, 1005 WMI_GRP_ROAM, 1006 WMI_GRP_OFL_SCAN, 1007 WMI_GRP_P2P, 1008 WMI_GRP_AP_PS, 1009 WMI_GRP_RATE_CTRL, 1010 WMI_GRP_PROFILE, 1011 WMI_GRP_SUSPEND, 1012 WMI_GRP_BCN_FILTER, 1013 WMI_GRP_WOW, 1014 WMI_GRP_RTT, 1015 WMI_GRP_SPECTRAL, 1016 WMI_GRP_STATS, 1017 WMI_GRP_ARP_NS_OFL, 1018 WMI_GRP_NLO_OFL, 1019 WMI_GRP_GTK_OFL, 1020 WMI_GRP_CSA_OFL, 1021 WMI_GRP_CHATTER, 1022 WMI_GRP_TID_ADDBA, 1023 WMI_GRP_MISC, 1024 WMI_GRP_GPIO, 1025 }; 1026 1027 #define WMI_CMD_GRP(grp_id) (((grp_id) << 12) | 0x1) 1028 #define WMI_EVT_GRP_START_ID(grp_id) (((grp_id) << 12) | 0x1) 1029 1030 #define WMI_CMD_UNSUPPORTED 0 1031 1032 /* Command IDs and command events for MAIN FW. */ 1033 enum wmi_cmd_id { 1034 WMI_INIT_CMDID = 0x1, 1035 1036 /* Scan specific commands */ 1037 WMI_START_SCAN_CMDID = WMI_CMD_GRP(WMI_GRP_SCAN), 1038 WMI_STOP_SCAN_CMDID, 1039 WMI_SCAN_CHAN_LIST_CMDID, 1040 WMI_SCAN_SCH_PRIO_TBL_CMDID, 1041 1042 /* PDEV (physical device) specific commands */ 1043 WMI_PDEV_SET_REGDOMAIN_CMDID = WMI_CMD_GRP(WMI_GRP_PDEV), 1044 WMI_PDEV_SET_CHANNEL_CMDID, 1045 WMI_PDEV_SET_PARAM_CMDID, 1046 WMI_PDEV_PKTLOG_ENABLE_CMDID, 1047 WMI_PDEV_PKTLOG_DISABLE_CMDID, 1048 WMI_PDEV_SET_WMM_PARAMS_CMDID, 1049 WMI_PDEV_SET_HT_CAP_IE_CMDID, 1050 WMI_PDEV_SET_VHT_CAP_IE_CMDID, 1051 WMI_PDEV_SET_DSCP_TID_MAP_CMDID, 1052 WMI_PDEV_SET_QUIET_MODE_CMDID, 1053 WMI_PDEV_GREEN_AP_PS_ENABLE_CMDID, 1054 WMI_PDEV_GET_TPC_CONFIG_CMDID, 1055 WMI_PDEV_SET_BASE_MACADDR_CMDID, 1056 1057 /* VDEV (virtual device) specific commands */ 1058 WMI_VDEV_CREATE_CMDID = WMI_CMD_GRP(WMI_GRP_VDEV), 1059 WMI_VDEV_DELETE_CMDID, 1060 WMI_VDEV_START_REQUEST_CMDID, 1061 WMI_VDEV_RESTART_REQUEST_CMDID, 1062 WMI_VDEV_UP_CMDID, 1063 WMI_VDEV_STOP_CMDID, 1064 WMI_VDEV_DOWN_CMDID, 1065 WMI_VDEV_SET_PARAM_CMDID, 1066 WMI_VDEV_INSTALL_KEY_CMDID, 1067 1068 /* peer specific commands */ 1069 WMI_PEER_CREATE_CMDID = WMI_CMD_GRP(WMI_GRP_PEER), 1070 WMI_PEER_DELETE_CMDID, 1071 WMI_PEER_FLUSH_TIDS_CMDID, 1072 WMI_PEER_SET_PARAM_CMDID, 1073 WMI_PEER_ASSOC_CMDID, 1074 WMI_PEER_ADD_WDS_ENTRY_CMDID, 1075 WMI_PEER_REMOVE_WDS_ENTRY_CMDID, 1076 WMI_PEER_MCAST_GROUP_CMDID, 1077 1078 /* beacon/management specific commands */ 1079 WMI_BCN_TX_CMDID = WMI_CMD_GRP(WMI_GRP_MGMT), 1080 WMI_PDEV_SEND_BCN_CMDID, 1081 WMI_BCN_TMPL_CMDID, 1082 WMI_BCN_FILTER_RX_CMDID, 1083 WMI_PRB_REQ_FILTER_RX_CMDID, 1084 WMI_MGMT_TX_CMDID, 1085 WMI_PRB_TMPL_CMDID, 1086 1087 /* commands to directly control BA negotiation directly from host. */ 1088 WMI_ADDBA_CLEAR_RESP_CMDID = WMI_CMD_GRP(WMI_GRP_BA_NEG), 1089 WMI_ADDBA_SEND_CMDID, 1090 WMI_ADDBA_STATUS_CMDID, 1091 WMI_DELBA_SEND_CMDID, 1092 WMI_ADDBA_SET_RESP_CMDID, 1093 WMI_SEND_SINGLEAMSDU_CMDID, 1094 1095 /* Station power save specific config */ 1096 WMI_STA_POWERSAVE_MODE_CMDID = WMI_CMD_GRP(WMI_GRP_STA_PS), 1097 WMI_STA_POWERSAVE_PARAM_CMDID, 1098 WMI_STA_MIMO_PS_MODE_CMDID, 1099 1100 /** DFS-specific commands */ 1101 WMI_PDEV_DFS_ENABLE_CMDID = WMI_CMD_GRP(WMI_GRP_DFS), 1102 WMI_PDEV_DFS_DISABLE_CMDID, 1103 1104 /* Roaming specific commands */ 1105 WMI_ROAM_SCAN_MODE = WMI_CMD_GRP(WMI_GRP_ROAM), 1106 WMI_ROAM_SCAN_RSSI_THRESHOLD, 1107 WMI_ROAM_SCAN_PERIOD, 1108 WMI_ROAM_SCAN_RSSI_CHANGE_THRESHOLD, 1109 WMI_ROAM_AP_PROFILE, 1110 1111 /* offload scan specific commands */ 1112 WMI_OFL_SCAN_ADD_AP_PROFILE = WMI_CMD_GRP(WMI_GRP_OFL_SCAN), 1113 WMI_OFL_SCAN_REMOVE_AP_PROFILE, 1114 WMI_OFL_SCAN_PERIOD, 1115 1116 /* P2P specific commands */ 1117 WMI_P2P_DEV_SET_DEVICE_INFO = WMI_CMD_GRP(WMI_GRP_P2P), 1118 WMI_P2P_DEV_SET_DISCOVERABILITY, 1119 WMI_P2P_GO_SET_BEACON_IE, 1120 WMI_P2P_GO_SET_PROBE_RESP_IE, 1121 WMI_P2P_SET_VENDOR_IE_DATA_CMDID, 1122 1123 /* AP power save specific config */ 1124 WMI_AP_PS_PEER_PARAM_CMDID = WMI_CMD_GRP(WMI_GRP_AP_PS), 1125 WMI_AP_PS_PEER_UAPSD_COEX_CMDID, 1126 1127 /* Rate-control specific commands */ 1128 WMI_PEER_RATE_RETRY_SCHED_CMDID = 1129 WMI_CMD_GRP(WMI_GRP_RATE_CTRL), 1130 1131 /* WLAN Profiling commands. */ 1132 WMI_WLAN_PROFILE_TRIGGER_CMDID = WMI_CMD_GRP(WMI_GRP_PROFILE), 1133 WMI_WLAN_PROFILE_SET_HIST_INTVL_CMDID, 1134 WMI_WLAN_PROFILE_GET_PROFILE_DATA_CMDID, 1135 WMI_WLAN_PROFILE_ENABLE_PROFILE_ID_CMDID, 1136 WMI_WLAN_PROFILE_LIST_PROFILE_ID_CMDID, 1137 1138 /* Suspend resume command Ids */ 1139 WMI_PDEV_SUSPEND_CMDID = WMI_CMD_GRP(WMI_GRP_SUSPEND), 1140 WMI_PDEV_RESUME_CMDID, 1141 1142 /* Beacon filter commands */ 1143 WMI_ADD_BCN_FILTER_CMDID = WMI_CMD_GRP(WMI_GRP_BCN_FILTER), 1144 WMI_RMV_BCN_FILTER_CMDID, 1145 1146 /* WOW Specific WMI commands*/ 1147 WMI_WOW_ADD_WAKE_PATTERN_CMDID = WMI_CMD_GRP(WMI_GRP_WOW), 1148 WMI_WOW_DEL_WAKE_PATTERN_CMDID, 1149 WMI_WOW_ENABLE_DISABLE_WAKE_EVENT_CMDID, 1150 WMI_WOW_ENABLE_CMDID, 1151 WMI_WOW_HOSTWAKEUP_FROM_SLEEP_CMDID, 1152 1153 /* RTT measurement related cmd */ 1154 WMI_RTT_MEASREQ_CMDID = WMI_CMD_GRP(WMI_GRP_RTT), 1155 WMI_RTT_TSF_CMDID, 1156 1157 /* spectral scan commands */ 1158 WMI_VDEV_SPECTRAL_SCAN_CONFIGURE_CMDID = WMI_CMD_GRP(WMI_GRP_SPECTRAL), 1159 WMI_VDEV_SPECTRAL_SCAN_ENABLE_CMDID, 1160 1161 /* F/W stats */ 1162 WMI_REQUEST_STATS_CMDID = WMI_CMD_GRP(WMI_GRP_STATS), 1163 1164 /* ARP OFFLOAD REQUEST*/ 1165 WMI_SET_ARP_NS_OFFLOAD_CMDID = WMI_CMD_GRP(WMI_GRP_ARP_NS_OFL), 1166 1167 /* NS offload confid*/ 1168 WMI_NETWORK_LIST_OFFLOAD_CONFIG_CMDID = WMI_CMD_GRP(WMI_GRP_NLO_OFL), 1169 1170 /* GTK offload Specific WMI commands*/ 1171 WMI_GTK_OFFLOAD_CMDID = WMI_CMD_GRP(WMI_GRP_GTK_OFL), 1172 1173 /* CSA offload Specific WMI commands*/ 1174 WMI_CSA_OFFLOAD_ENABLE_CMDID = WMI_CMD_GRP(WMI_GRP_CSA_OFL), 1175 WMI_CSA_OFFLOAD_CHANSWITCH_CMDID, 1176 1177 /* Chatter commands*/ 1178 WMI_CHATTER_SET_MODE_CMDID = WMI_CMD_GRP(WMI_GRP_CHATTER), 1179 1180 /* addba specific commands */ 1181 WMI_PEER_TID_ADDBA_CMDID = WMI_CMD_GRP(WMI_GRP_TID_ADDBA), 1182 WMI_PEER_TID_DELBA_CMDID, 1183 1184 /* set station mimo powersave method */ 1185 WMI_STA_DTIM_PS_METHOD_CMDID, 1186 /* Configure the Station UAPSD AC Auto Trigger Parameters */ 1187 WMI_STA_UAPSD_AUTO_TRIG_CMDID, 1188 1189 /* STA Keep alive parameter configuration, 1190 * Requires WMI_SERVICE_STA_KEEP_ALIVE 1191 */ 1192 WMI_STA_KEEPALIVE_CMD, 1193 1194 /* misc command group */ 1195 WMI_ECHO_CMDID = WMI_CMD_GRP(WMI_GRP_MISC), 1196 WMI_PDEV_UTF_CMDID, 1197 WMI_DBGLOG_CFG_CMDID, 1198 WMI_PDEV_QVIT_CMDID, 1199 WMI_PDEV_FTM_INTG_CMDID, 1200 WMI_VDEV_SET_KEEPALIVE_CMDID, 1201 WMI_VDEV_GET_KEEPALIVE_CMDID, 1202 WMI_FORCE_FW_HANG_CMDID, 1203 1204 /* GPIO Configuration */ 1205 WMI_GPIO_CONFIG_CMDID = WMI_CMD_GRP(WMI_GRP_GPIO), 1206 WMI_GPIO_OUTPUT_CMDID, 1207 }; 1208 1209 enum wmi_event_id { 1210 WMI_SERVICE_READY_EVENTID = 0x1, 1211 WMI_READY_EVENTID, 1212 WMI_SERVICE_AVAILABLE_EVENTID, 1213 1214 /* Scan specific events */ 1215 WMI_SCAN_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_SCAN), 1216 1217 /* PDEV specific events */ 1218 WMI_PDEV_TPC_CONFIG_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_PDEV), 1219 WMI_CHAN_INFO_EVENTID, 1220 WMI_PHYERR_EVENTID, 1221 1222 /* VDEV specific events */ 1223 WMI_VDEV_START_RESP_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_VDEV), 1224 WMI_VDEV_STOPPED_EVENTID, 1225 WMI_VDEV_INSTALL_KEY_COMPLETE_EVENTID, 1226 1227 /* peer specific events */ 1228 WMI_PEER_STA_KICKOUT_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_PEER), 1229 1230 /* beacon/mgmt specific events */ 1231 WMI_MGMT_RX_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_MGMT), 1232 WMI_HOST_SWBA_EVENTID, 1233 WMI_TBTTOFFSET_UPDATE_EVENTID, 1234 1235 /* ADDBA Related WMI Events*/ 1236 WMI_TX_DELBA_COMPLETE_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_BA_NEG), 1237 WMI_TX_ADDBA_COMPLETE_EVENTID, 1238 1239 /* Roam event to trigger roaming on host */ 1240 WMI_ROAM_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_ROAM), 1241 WMI_PROFILE_MATCH, 1242 1243 /* WoW */ 1244 WMI_WOW_WAKEUP_HOST_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_WOW), 1245 1246 /* RTT */ 1247 WMI_RTT_MEASUREMENT_REPORT_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_RTT), 1248 WMI_TSF_MEASUREMENT_REPORT_EVENTID, 1249 WMI_RTT_ERROR_REPORT_EVENTID, 1250 1251 /* GTK offload */ 1252 WMI_GTK_OFFLOAD_STATUS_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_GTK_OFL), 1253 WMI_GTK_REKEY_FAIL_EVENTID, 1254 1255 /* CSA IE received event */ 1256 WMI_CSA_HANDLING_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_CSA_OFL), 1257 1258 /* Misc events */ 1259 WMI_ECHO_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_MISC), 1260 WMI_PDEV_UTF_EVENTID, 1261 WMI_DEBUG_MESG_EVENTID, 1262 WMI_UPDATE_STATS_EVENTID, 1263 WMI_DEBUG_PRINT_EVENTID, 1264 WMI_DCS_INTERFERENCE_EVENTID, 1265 WMI_PDEV_QVIT_EVENTID, 1266 WMI_WLAN_PROFILE_DATA_EVENTID, 1267 WMI_PDEV_FTM_INTG_EVENTID, 1268 WMI_WLAN_FREQ_AVOID_EVENTID, 1269 WMI_VDEV_GET_KEEPALIVE_EVENTID, 1270 1271 /* GPIO Event */ 1272 WMI_GPIO_INPUT_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_GPIO), 1273 }; 1274 1275 /* Command IDs and command events for 10.X firmware */ 1276 enum wmi_10x_cmd_id { 1277 WMI_10X_START_CMDID = 0x9000, 1278 WMI_10X_END_CMDID = 0x9FFF, 1279 1280 /* initialize the wlan sub system */ 1281 WMI_10X_INIT_CMDID, 1282 1283 /* Scan specific commands */ 1284 1285 WMI_10X_START_SCAN_CMDID = WMI_10X_START_CMDID, 1286 WMI_10X_STOP_SCAN_CMDID, 1287 WMI_10X_SCAN_CHAN_LIST_CMDID, 1288 WMI_10X_ECHO_CMDID, 1289 1290 /* PDEV(physical device) specific commands */ 1291 WMI_10X_PDEV_SET_REGDOMAIN_CMDID, 1292 WMI_10X_PDEV_SET_CHANNEL_CMDID, 1293 WMI_10X_PDEV_SET_PARAM_CMDID, 1294 WMI_10X_PDEV_PKTLOG_ENABLE_CMDID, 1295 WMI_10X_PDEV_PKTLOG_DISABLE_CMDID, 1296 WMI_10X_PDEV_SET_WMM_PARAMS_CMDID, 1297 WMI_10X_PDEV_SET_HT_CAP_IE_CMDID, 1298 WMI_10X_PDEV_SET_VHT_CAP_IE_CMDID, 1299 WMI_10X_PDEV_SET_BASE_MACADDR_CMDID, 1300 WMI_10X_PDEV_SET_DSCP_TID_MAP_CMDID, 1301 WMI_10X_PDEV_SET_QUIET_MODE_CMDID, 1302 WMI_10X_PDEV_GREEN_AP_PS_ENABLE_CMDID, 1303 WMI_10X_PDEV_GET_TPC_CONFIG_CMDID, 1304 1305 /* VDEV(virtual device) specific commands */ 1306 WMI_10X_VDEV_CREATE_CMDID, 1307 WMI_10X_VDEV_DELETE_CMDID, 1308 WMI_10X_VDEV_START_REQUEST_CMDID, 1309 WMI_10X_VDEV_RESTART_REQUEST_CMDID, 1310 WMI_10X_VDEV_UP_CMDID, 1311 WMI_10X_VDEV_STOP_CMDID, 1312 WMI_10X_VDEV_DOWN_CMDID, 1313 WMI_10X_VDEV_STANDBY_RESPONSE_CMDID, 1314 WMI_10X_VDEV_RESUME_RESPONSE_CMDID, 1315 WMI_10X_VDEV_SET_PARAM_CMDID, 1316 WMI_10X_VDEV_INSTALL_KEY_CMDID, 1317 1318 /* peer specific commands */ 1319 WMI_10X_PEER_CREATE_CMDID, 1320 WMI_10X_PEER_DELETE_CMDID, 1321 WMI_10X_PEER_FLUSH_TIDS_CMDID, 1322 WMI_10X_PEER_SET_PARAM_CMDID, 1323 WMI_10X_PEER_ASSOC_CMDID, 1324 WMI_10X_PEER_ADD_WDS_ENTRY_CMDID, 1325 WMI_10X_PEER_REMOVE_WDS_ENTRY_CMDID, 1326 WMI_10X_PEER_MCAST_GROUP_CMDID, 1327 1328 /* beacon/management specific commands */ 1329 1330 WMI_10X_BCN_TX_CMDID, 1331 WMI_10X_BCN_PRB_TMPL_CMDID, 1332 WMI_10X_BCN_FILTER_RX_CMDID, 1333 WMI_10X_PRB_REQ_FILTER_RX_CMDID, 1334 WMI_10X_MGMT_TX_CMDID, 1335 1336 /* commands to directly control ba negotiation directly from host. */ 1337 WMI_10X_ADDBA_CLEAR_RESP_CMDID, 1338 WMI_10X_ADDBA_SEND_CMDID, 1339 WMI_10X_ADDBA_STATUS_CMDID, 1340 WMI_10X_DELBA_SEND_CMDID, 1341 WMI_10X_ADDBA_SET_RESP_CMDID, 1342 WMI_10X_SEND_SINGLEAMSDU_CMDID, 1343 1344 /* Station power save specific config */ 1345 WMI_10X_STA_POWERSAVE_MODE_CMDID, 1346 WMI_10X_STA_POWERSAVE_PARAM_CMDID, 1347 WMI_10X_STA_MIMO_PS_MODE_CMDID, 1348 1349 /* set debug log config */ 1350 WMI_10X_DBGLOG_CFG_CMDID, 1351 1352 /* DFS-specific commands */ 1353 WMI_10X_PDEV_DFS_ENABLE_CMDID, 1354 WMI_10X_PDEV_DFS_DISABLE_CMDID, 1355 1356 /* QVIT specific command id */ 1357 WMI_10X_PDEV_QVIT_CMDID, 1358 1359 /* Offload Scan and Roaming related commands */ 1360 WMI_10X_ROAM_SCAN_MODE, 1361 WMI_10X_ROAM_SCAN_RSSI_THRESHOLD, 1362 WMI_10X_ROAM_SCAN_PERIOD, 1363 WMI_10X_ROAM_SCAN_RSSI_CHANGE_THRESHOLD, 1364 WMI_10X_ROAM_AP_PROFILE, 1365 WMI_10X_OFL_SCAN_ADD_AP_PROFILE, 1366 WMI_10X_OFL_SCAN_REMOVE_AP_PROFILE, 1367 WMI_10X_OFL_SCAN_PERIOD, 1368 1369 /* P2P specific commands */ 1370 WMI_10X_P2P_DEV_SET_DEVICE_INFO, 1371 WMI_10X_P2P_DEV_SET_DISCOVERABILITY, 1372 WMI_10X_P2P_GO_SET_BEACON_IE, 1373 WMI_10X_P2P_GO_SET_PROBE_RESP_IE, 1374 1375 /* AP power save specific config */ 1376 WMI_10X_AP_PS_PEER_PARAM_CMDID, 1377 WMI_10X_AP_PS_PEER_UAPSD_COEX_CMDID, 1378 1379 /* Rate-control specific commands */ 1380 WMI_10X_PEER_RATE_RETRY_SCHED_CMDID, 1381 1382 /* WLAN Profiling commands. */ 1383 WMI_10X_WLAN_PROFILE_TRIGGER_CMDID, 1384 WMI_10X_WLAN_PROFILE_SET_HIST_INTVL_CMDID, 1385 WMI_10X_WLAN_PROFILE_GET_PROFILE_DATA_CMDID, 1386 WMI_10X_WLAN_PROFILE_ENABLE_PROFILE_ID_CMDID, 1387 WMI_10X_WLAN_PROFILE_LIST_PROFILE_ID_CMDID, 1388 1389 /* Suspend resume command Ids */ 1390 WMI_10X_PDEV_SUSPEND_CMDID, 1391 WMI_10X_PDEV_RESUME_CMDID, 1392 1393 /* Beacon filter commands */ 1394 WMI_10X_ADD_BCN_FILTER_CMDID, 1395 WMI_10X_RMV_BCN_FILTER_CMDID, 1396 1397 /* WOW Specific WMI commands*/ 1398 WMI_10X_WOW_ADD_WAKE_PATTERN_CMDID, 1399 WMI_10X_WOW_DEL_WAKE_PATTERN_CMDID, 1400 WMI_10X_WOW_ENABLE_DISABLE_WAKE_EVENT_CMDID, 1401 WMI_10X_WOW_ENABLE_CMDID, 1402 WMI_10X_WOW_HOSTWAKEUP_FROM_SLEEP_CMDID, 1403 1404 /* RTT measurement related cmd */ 1405 WMI_10X_RTT_MEASREQ_CMDID, 1406 WMI_10X_RTT_TSF_CMDID, 1407 1408 /* transmit beacon by value */ 1409 WMI_10X_PDEV_SEND_BCN_CMDID, 1410 1411 /* F/W stats */ 1412 WMI_10X_VDEV_SPECTRAL_SCAN_CONFIGURE_CMDID, 1413 WMI_10X_VDEV_SPECTRAL_SCAN_ENABLE_CMDID, 1414 WMI_10X_REQUEST_STATS_CMDID, 1415 1416 /* GPIO Configuration */ 1417 WMI_10X_GPIO_CONFIG_CMDID, 1418 WMI_10X_GPIO_OUTPUT_CMDID, 1419 1420 WMI_10X_PDEV_UTF_CMDID = WMI_10X_END_CMDID - 1, 1421 }; 1422 1423 enum wmi_10x_event_id { 1424 WMI_10X_SERVICE_READY_EVENTID = 0x8000, 1425 WMI_10X_READY_EVENTID, 1426 WMI_10X_START_EVENTID = 0x9000, 1427 WMI_10X_END_EVENTID = 0x9FFF, 1428 1429 /* Scan specific events */ 1430 WMI_10X_SCAN_EVENTID = WMI_10X_START_EVENTID, 1431 WMI_10X_ECHO_EVENTID, 1432 WMI_10X_DEBUG_MESG_EVENTID, 1433 WMI_10X_UPDATE_STATS_EVENTID, 1434 1435 /* Instantaneous RSSI event */ 1436 WMI_10X_INST_RSSI_STATS_EVENTID, 1437 1438 /* VDEV specific events */ 1439 WMI_10X_VDEV_START_RESP_EVENTID, 1440 WMI_10X_VDEV_STANDBY_REQ_EVENTID, 1441 WMI_10X_VDEV_RESUME_REQ_EVENTID, 1442 WMI_10X_VDEV_STOPPED_EVENTID, 1443 1444 /* peer specific events */ 1445 WMI_10X_PEER_STA_KICKOUT_EVENTID, 1446 1447 /* beacon/mgmt specific events */ 1448 WMI_10X_HOST_SWBA_EVENTID, 1449 WMI_10X_TBTTOFFSET_UPDATE_EVENTID, 1450 WMI_10X_MGMT_RX_EVENTID, 1451 1452 /* Channel stats event */ 1453 WMI_10X_CHAN_INFO_EVENTID, 1454 1455 /* PHY Error specific WMI event */ 1456 WMI_10X_PHYERR_EVENTID, 1457 1458 /* Roam event to trigger roaming on host */ 1459 WMI_10X_ROAM_EVENTID, 1460 1461 /* matching AP found from list of profiles */ 1462 WMI_10X_PROFILE_MATCH, 1463 1464 /* debug print message used for tracing FW code while debugging */ 1465 WMI_10X_DEBUG_PRINT_EVENTID, 1466 /* VI spoecific event */ 1467 WMI_10X_PDEV_QVIT_EVENTID, 1468 /* FW code profile data in response to profile request */ 1469 WMI_10X_WLAN_PROFILE_DATA_EVENTID, 1470 1471 /*RTT related event ID*/ 1472 WMI_10X_RTT_MEASUREMENT_REPORT_EVENTID, 1473 WMI_10X_TSF_MEASUREMENT_REPORT_EVENTID, 1474 WMI_10X_RTT_ERROR_REPORT_EVENTID, 1475 1476 WMI_10X_WOW_WAKEUP_HOST_EVENTID, 1477 WMI_10X_DCS_INTERFERENCE_EVENTID, 1478 1479 /* TPC config for the current operating channel */ 1480 WMI_10X_PDEV_TPC_CONFIG_EVENTID, 1481 1482 WMI_10X_GPIO_INPUT_EVENTID, 1483 WMI_10X_PDEV_UTF_EVENTID = WMI_10X_END_EVENTID - 1, 1484 }; 1485 1486 enum wmi_10_2_cmd_id { 1487 WMI_10_2_START_CMDID = 0x9000, 1488 WMI_10_2_END_CMDID = 0x9FFF, 1489 WMI_10_2_INIT_CMDID, 1490 WMI_10_2_START_SCAN_CMDID = WMI_10_2_START_CMDID, 1491 WMI_10_2_STOP_SCAN_CMDID, 1492 WMI_10_2_SCAN_CHAN_LIST_CMDID, 1493 WMI_10_2_ECHO_CMDID, 1494 WMI_10_2_PDEV_SET_REGDOMAIN_CMDID, 1495 WMI_10_2_PDEV_SET_CHANNEL_CMDID, 1496 WMI_10_2_PDEV_SET_PARAM_CMDID, 1497 WMI_10_2_PDEV_PKTLOG_ENABLE_CMDID, 1498 WMI_10_2_PDEV_PKTLOG_DISABLE_CMDID, 1499 WMI_10_2_PDEV_SET_WMM_PARAMS_CMDID, 1500 WMI_10_2_PDEV_SET_HT_CAP_IE_CMDID, 1501 WMI_10_2_PDEV_SET_VHT_CAP_IE_CMDID, 1502 WMI_10_2_PDEV_SET_BASE_MACADDR_CMDID, 1503 WMI_10_2_PDEV_SET_QUIET_MODE_CMDID, 1504 WMI_10_2_PDEV_GREEN_AP_PS_ENABLE_CMDID, 1505 WMI_10_2_PDEV_GET_TPC_CONFIG_CMDID, 1506 WMI_10_2_VDEV_CREATE_CMDID, 1507 WMI_10_2_VDEV_DELETE_CMDID, 1508 WMI_10_2_VDEV_START_REQUEST_CMDID, 1509 WMI_10_2_VDEV_RESTART_REQUEST_CMDID, 1510 WMI_10_2_VDEV_UP_CMDID, 1511 WMI_10_2_VDEV_STOP_CMDID, 1512 WMI_10_2_VDEV_DOWN_CMDID, 1513 WMI_10_2_VDEV_STANDBY_RESPONSE_CMDID, 1514 WMI_10_2_VDEV_RESUME_RESPONSE_CMDID, 1515 WMI_10_2_VDEV_SET_PARAM_CMDID, 1516 WMI_10_2_VDEV_INSTALL_KEY_CMDID, 1517 WMI_10_2_VDEV_SET_DSCP_TID_MAP_CMDID, 1518 WMI_10_2_PEER_CREATE_CMDID, 1519 WMI_10_2_PEER_DELETE_CMDID, 1520 WMI_10_2_PEER_FLUSH_TIDS_CMDID, 1521 WMI_10_2_PEER_SET_PARAM_CMDID, 1522 WMI_10_2_PEER_ASSOC_CMDID, 1523 WMI_10_2_PEER_ADD_WDS_ENTRY_CMDID, 1524 WMI_10_2_PEER_UPDATE_WDS_ENTRY_CMDID, 1525 WMI_10_2_PEER_REMOVE_WDS_ENTRY_CMDID, 1526 WMI_10_2_PEER_MCAST_GROUP_CMDID, 1527 WMI_10_2_BCN_TX_CMDID, 1528 WMI_10_2_BCN_PRB_TMPL_CMDID, 1529 WMI_10_2_BCN_FILTER_RX_CMDID, 1530 WMI_10_2_PRB_REQ_FILTER_RX_CMDID, 1531 WMI_10_2_MGMT_TX_CMDID, 1532 WMI_10_2_ADDBA_CLEAR_RESP_CMDID, 1533 WMI_10_2_ADDBA_SEND_CMDID, 1534 WMI_10_2_ADDBA_STATUS_CMDID, 1535 WMI_10_2_DELBA_SEND_CMDID, 1536 WMI_10_2_ADDBA_SET_RESP_CMDID, 1537 WMI_10_2_SEND_SINGLEAMSDU_CMDID, 1538 WMI_10_2_STA_POWERSAVE_MODE_CMDID, 1539 WMI_10_2_STA_POWERSAVE_PARAM_CMDID, 1540 WMI_10_2_STA_MIMO_PS_MODE_CMDID, 1541 WMI_10_2_DBGLOG_CFG_CMDID, 1542 WMI_10_2_PDEV_DFS_ENABLE_CMDID, 1543 WMI_10_2_PDEV_DFS_DISABLE_CMDID, 1544 WMI_10_2_PDEV_QVIT_CMDID, 1545 WMI_10_2_ROAM_SCAN_MODE, 1546 WMI_10_2_ROAM_SCAN_RSSI_THRESHOLD, 1547 WMI_10_2_ROAM_SCAN_PERIOD, 1548 WMI_10_2_ROAM_SCAN_RSSI_CHANGE_THRESHOLD, 1549 WMI_10_2_ROAM_AP_PROFILE, 1550 WMI_10_2_OFL_SCAN_ADD_AP_PROFILE, 1551 WMI_10_2_OFL_SCAN_REMOVE_AP_PROFILE, 1552 WMI_10_2_OFL_SCAN_PERIOD, 1553 WMI_10_2_P2P_DEV_SET_DEVICE_INFO, 1554 WMI_10_2_P2P_DEV_SET_DISCOVERABILITY, 1555 WMI_10_2_P2P_GO_SET_BEACON_IE, 1556 WMI_10_2_P2P_GO_SET_PROBE_RESP_IE, 1557 WMI_10_2_AP_PS_PEER_PARAM_CMDID, 1558 WMI_10_2_AP_PS_PEER_UAPSD_COEX_CMDID, 1559 WMI_10_2_PEER_RATE_RETRY_SCHED_CMDID, 1560 WMI_10_2_WLAN_PROFILE_TRIGGER_CMDID, 1561 WMI_10_2_WLAN_PROFILE_SET_HIST_INTVL_CMDID, 1562 WMI_10_2_WLAN_PROFILE_GET_PROFILE_DATA_CMDID, 1563 WMI_10_2_WLAN_PROFILE_ENABLE_PROFILE_ID_CMDID, 1564 WMI_10_2_WLAN_PROFILE_LIST_PROFILE_ID_CMDID, 1565 WMI_10_2_PDEV_SUSPEND_CMDID, 1566 WMI_10_2_PDEV_RESUME_CMDID, 1567 WMI_10_2_ADD_BCN_FILTER_CMDID, 1568 WMI_10_2_RMV_BCN_FILTER_CMDID, 1569 WMI_10_2_WOW_ADD_WAKE_PATTERN_CMDID, 1570 WMI_10_2_WOW_DEL_WAKE_PATTERN_CMDID, 1571 WMI_10_2_WOW_ENABLE_DISABLE_WAKE_EVENT_CMDID, 1572 WMI_10_2_WOW_ENABLE_CMDID, 1573 WMI_10_2_WOW_HOSTWAKEUP_FROM_SLEEP_CMDID, 1574 WMI_10_2_RTT_MEASREQ_CMDID, 1575 WMI_10_2_RTT_TSF_CMDID, 1576 WMI_10_2_RTT_KEEPALIVE_CMDID, 1577 WMI_10_2_PDEV_SEND_BCN_CMDID, 1578 WMI_10_2_VDEV_SPECTRAL_SCAN_CONFIGURE_CMDID, 1579 WMI_10_2_VDEV_SPECTRAL_SCAN_ENABLE_CMDID, 1580 WMI_10_2_REQUEST_STATS_CMDID, 1581 WMI_10_2_GPIO_CONFIG_CMDID, 1582 WMI_10_2_GPIO_OUTPUT_CMDID, 1583 WMI_10_2_VDEV_RATEMASK_CMDID, 1584 WMI_10_2_PDEV_SMART_ANT_ENABLE_CMDID, 1585 WMI_10_2_PDEV_SMART_ANT_SET_RX_ANTENNA_CMDID, 1586 WMI_10_2_PEER_SMART_ANT_SET_TX_ANTENNA_CMDID, 1587 WMI_10_2_PEER_SMART_ANT_SET_TRAIN_INFO_CMDID, 1588 WMI_10_2_PEER_SMART_ANT_SET_NODE_CONFIG_OPS_CMDID, 1589 WMI_10_2_FORCE_FW_HANG_CMDID, 1590 WMI_10_2_PDEV_SET_ANTENNA_SWITCH_TABLE_CMDID, 1591 WMI_10_2_PDEV_SET_CTL_TABLE_CMDID, 1592 WMI_10_2_PDEV_SET_MIMOGAIN_TABLE_CMDID, 1593 WMI_10_2_PDEV_RATEPWR_TABLE_CMDID, 1594 WMI_10_2_PDEV_RATEPWR_CHAINMSK_TABLE_CMDID, 1595 WMI_10_2_PDEV_GET_INFO, 1596 WMI_10_2_VDEV_GET_INFO, 1597 WMI_10_2_VDEV_ATF_REQUEST_CMDID, 1598 WMI_10_2_PEER_ATF_REQUEST_CMDID, 1599 WMI_10_2_PDEV_GET_TEMPERATURE_CMDID, 1600 WMI_10_2_MU_CAL_START_CMDID, 1601 WMI_10_2_SET_LTEU_CONFIG_CMDID, 1602 WMI_10_2_SET_CCA_PARAMS, 1603 WMI_10_2_PDEV_BSS_CHAN_INFO_REQUEST_CMDID, 1604 WMI_10_2_PDEV_UTF_CMDID = WMI_10_2_END_CMDID - 1, 1605 }; 1606 1607 enum wmi_10_2_event_id { 1608 WMI_10_2_SERVICE_READY_EVENTID = 0x8000, 1609 WMI_10_2_READY_EVENTID, 1610 WMI_10_2_DEBUG_MESG_EVENTID, 1611 WMI_10_2_START_EVENTID = 0x9000, 1612 WMI_10_2_END_EVENTID = 0x9FFF, 1613 WMI_10_2_SCAN_EVENTID = WMI_10_2_START_EVENTID, 1614 WMI_10_2_ECHO_EVENTID, 1615 WMI_10_2_UPDATE_STATS_EVENTID, 1616 WMI_10_2_INST_RSSI_STATS_EVENTID, 1617 WMI_10_2_VDEV_START_RESP_EVENTID, 1618 WMI_10_2_VDEV_STANDBY_REQ_EVENTID, 1619 WMI_10_2_VDEV_RESUME_REQ_EVENTID, 1620 WMI_10_2_VDEV_STOPPED_EVENTID, 1621 WMI_10_2_PEER_STA_KICKOUT_EVENTID, 1622 WMI_10_2_HOST_SWBA_EVENTID, 1623 WMI_10_2_TBTTOFFSET_UPDATE_EVENTID, 1624 WMI_10_2_MGMT_RX_EVENTID, 1625 WMI_10_2_CHAN_INFO_EVENTID, 1626 WMI_10_2_PHYERR_EVENTID, 1627 WMI_10_2_ROAM_EVENTID, 1628 WMI_10_2_PROFILE_MATCH, 1629 WMI_10_2_DEBUG_PRINT_EVENTID, 1630 WMI_10_2_PDEV_QVIT_EVENTID, 1631 WMI_10_2_WLAN_PROFILE_DATA_EVENTID, 1632 WMI_10_2_RTT_MEASUREMENT_REPORT_EVENTID, 1633 WMI_10_2_TSF_MEASUREMENT_REPORT_EVENTID, 1634 WMI_10_2_RTT_ERROR_REPORT_EVENTID, 1635 WMI_10_2_RTT_KEEPALIVE_EVENTID, 1636 WMI_10_2_WOW_WAKEUP_HOST_EVENTID, 1637 WMI_10_2_DCS_INTERFERENCE_EVENTID, 1638 WMI_10_2_PDEV_TPC_CONFIG_EVENTID, 1639 WMI_10_2_GPIO_INPUT_EVENTID, 1640 WMI_10_2_PEER_RATECODE_LIST_EVENTID, 1641 WMI_10_2_GENERIC_BUFFER_EVENTID, 1642 WMI_10_2_MCAST_BUF_RELEASE_EVENTID, 1643 WMI_10_2_MCAST_LIST_AGEOUT_EVENTID, 1644 WMI_10_2_WDS_PEER_EVENTID, 1645 WMI_10_2_PEER_STA_PS_STATECHG_EVENTID, 1646 WMI_10_2_PDEV_TEMPERATURE_EVENTID, 1647 WMI_10_2_MU_REPORT_EVENTID, 1648 WMI_10_2_PDEV_BSS_CHAN_INFO_EVENTID, 1649 WMI_10_2_PDEV_UTF_EVENTID = WMI_10_2_END_EVENTID - 1, 1650 }; 1651 1652 enum wmi_10_4_cmd_id { 1653 WMI_10_4_START_CMDID = 0x9000, 1654 WMI_10_4_END_CMDID = 0x9FFF, 1655 WMI_10_4_INIT_CMDID, 1656 WMI_10_4_START_SCAN_CMDID = WMI_10_4_START_CMDID, 1657 WMI_10_4_STOP_SCAN_CMDID, 1658 WMI_10_4_SCAN_CHAN_LIST_CMDID, 1659 WMI_10_4_SCAN_SCH_PRIO_TBL_CMDID, 1660 WMI_10_4_SCAN_UPDATE_REQUEST_CMDID, 1661 WMI_10_4_ECHO_CMDID, 1662 WMI_10_4_PDEV_SET_REGDOMAIN_CMDID, 1663 WMI_10_4_PDEV_SET_CHANNEL_CMDID, 1664 WMI_10_4_PDEV_SET_PARAM_CMDID, 1665 WMI_10_4_PDEV_PKTLOG_ENABLE_CMDID, 1666 WMI_10_4_PDEV_PKTLOG_DISABLE_CMDID, 1667 WMI_10_4_PDEV_SET_WMM_PARAMS_CMDID, 1668 WMI_10_4_PDEV_SET_HT_CAP_IE_CMDID, 1669 WMI_10_4_PDEV_SET_VHT_CAP_IE_CMDID, 1670 WMI_10_4_PDEV_SET_BASE_MACADDR_CMDID, 1671 WMI_10_4_PDEV_SET_DSCP_TID_MAP_CMDID, 1672 WMI_10_4_PDEV_SET_QUIET_MODE_CMDID, 1673 WMI_10_4_PDEV_GREEN_AP_PS_ENABLE_CMDID, 1674 WMI_10_4_PDEV_GET_TPC_CONFIG_CMDID, 1675 WMI_10_4_VDEV_CREATE_CMDID, 1676 WMI_10_4_VDEV_DELETE_CMDID, 1677 WMI_10_4_VDEV_START_REQUEST_CMDID, 1678 WMI_10_4_VDEV_RESTART_REQUEST_CMDID, 1679 WMI_10_4_VDEV_UP_CMDID, 1680 WMI_10_4_VDEV_STOP_CMDID, 1681 WMI_10_4_VDEV_DOWN_CMDID, 1682 WMI_10_4_VDEV_STANDBY_RESPONSE_CMDID, 1683 WMI_10_4_VDEV_RESUME_RESPONSE_CMDID, 1684 WMI_10_4_VDEV_SET_PARAM_CMDID, 1685 WMI_10_4_VDEV_INSTALL_KEY_CMDID, 1686 WMI_10_4_WLAN_PEER_CACHING_ADD_PEER_CMDID, 1687 WMI_10_4_WLAN_PEER_CACHING_EVICT_PEER_CMDID, 1688 WMI_10_4_WLAN_PEER_CACHING_RESTORE_PEER_CMDID, 1689 WMI_10_4_WLAN_PEER_CACHING_PRINT_ALL_PEERS_INFO_CMDID, 1690 WMI_10_4_PEER_CREATE_CMDID, 1691 WMI_10_4_PEER_DELETE_CMDID, 1692 WMI_10_4_PEER_FLUSH_TIDS_CMDID, 1693 WMI_10_4_PEER_SET_PARAM_CMDID, 1694 WMI_10_4_PEER_ASSOC_CMDID, 1695 WMI_10_4_PEER_ADD_WDS_ENTRY_CMDID, 1696 WMI_10_4_PEER_UPDATE_WDS_ENTRY_CMDID, 1697 WMI_10_4_PEER_REMOVE_WDS_ENTRY_CMDID, 1698 WMI_10_4_PEER_ADD_PROXY_STA_ENTRY_CMDID, 1699 WMI_10_4_PEER_MCAST_GROUP_CMDID, 1700 WMI_10_4_BCN_TX_CMDID, 1701 WMI_10_4_PDEV_SEND_BCN_CMDID, 1702 WMI_10_4_BCN_PRB_TMPL_CMDID, 1703 WMI_10_4_BCN_FILTER_RX_CMDID, 1704 WMI_10_4_PRB_REQ_FILTER_RX_CMDID, 1705 WMI_10_4_MGMT_TX_CMDID, 1706 WMI_10_4_PRB_TMPL_CMDID, 1707 WMI_10_4_ADDBA_CLEAR_RESP_CMDID, 1708 WMI_10_4_ADDBA_SEND_CMDID, 1709 WMI_10_4_ADDBA_STATUS_CMDID, 1710 WMI_10_4_DELBA_SEND_CMDID, 1711 WMI_10_4_ADDBA_SET_RESP_CMDID, 1712 WMI_10_4_SEND_SINGLEAMSDU_CMDID, 1713 WMI_10_4_STA_POWERSAVE_MODE_CMDID, 1714 WMI_10_4_STA_POWERSAVE_PARAM_CMDID, 1715 WMI_10_4_STA_MIMO_PS_MODE_CMDID, 1716 WMI_10_4_DBGLOG_CFG_CMDID, 1717 WMI_10_4_PDEV_DFS_ENABLE_CMDID, 1718 WMI_10_4_PDEV_DFS_DISABLE_CMDID, 1719 WMI_10_4_PDEV_QVIT_CMDID, 1720 WMI_10_4_ROAM_SCAN_MODE, 1721 WMI_10_4_ROAM_SCAN_RSSI_THRESHOLD, 1722 WMI_10_4_ROAM_SCAN_PERIOD, 1723 WMI_10_4_ROAM_SCAN_RSSI_CHANGE_THRESHOLD, 1724 WMI_10_4_ROAM_AP_PROFILE, 1725 WMI_10_4_OFL_SCAN_ADD_AP_PROFILE, 1726 WMI_10_4_OFL_SCAN_REMOVE_AP_PROFILE, 1727 WMI_10_4_OFL_SCAN_PERIOD, 1728 WMI_10_4_P2P_DEV_SET_DEVICE_INFO, 1729 WMI_10_4_P2P_DEV_SET_DISCOVERABILITY, 1730 WMI_10_4_P2P_GO_SET_BEACON_IE, 1731 WMI_10_4_P2P_GO_SET_PROBE_RESP_IE, 1732 WMI_10_4_P2P_SET_VENDOR_IE_DATA_CMDID, 1733 WMI_10_4_AP_PS_PEER_PARAM_CMDID, 1734 WMI_10_4_AP_PS_PEER_UAPSD_COEX_CMDID, 1735 WMI_10_4_PEER_RATE_RETRY_SCHED_CMDID, 1736 WMI_10_4_WLAN_PROFILE_TRIGGER_CMDID, 1737 WMI_10_4_WLAN_PROFILE_SET_HIST_INTVL_CMDID, 1738 WMI_10_4_WLAN_PROFILE_GET_PROFILE_DATA_CMDID, 1739 WMI_10_4_WLAN_PROFILE_ENABLE_PROFILE_ID_CMDID, 1740 WMI_10_4_WLAN_PROFILE_LIST_PROFILE_ID_CMDID, 1741 WMI_10_4_PDEV_SUSPEND_CMDID, 1742 WMI_10_4_PDEV_RESUME_CMDID, 1743 WMI_10_4_ADD_BCN_FILTER_CMDID, 1744 WMI_10_4_RMV_BCN_FILTER_CMDID, 1745 WMI_10_4_WOW_ADD_WAKE_PATTERN_CMDID, 1746 WMI_10_4_WOW_DEL_WAKE_PATTERN_CMDID, 1747 WMI_10_4_WOW_ENABLE_DISABLE_WAKE_EVENT_CMDID, 1748 WMI_10_4_WOW_ENABLE_CMDID, 1749 WMI_10_4_WOW_HOSTWAKEUP_FROM_SLEEP_CMDID, 1750 WMI_10_4_RTT_MEASREQ_CMDID, 1751 WMI_10_4_RTT_TSF_CMDID, 1752 WMI_10_4_RTT_KEEPALIVE_CMDID, 1753 WMI_10_4_OEM_REQ_CMDID, 1754 WMI_10_4_NAN_CMDID, 1755 WMI_10_4_VDEV_SPECTRAL_SCAN_CONFIGURE_CMDID, 1756 WMI_10_4_VDEV_SPECTRAL_SCAN_ENABLE_CMDID, 1757 WMI_10_4_REQUEST_STATS_CMDID, 1758 WMI_10_4_GPIO_CONFIG_CMDID, 1759 WMI_10_4_GPIO_OUTPUT_CMDID, 1760 WMI_10_4_VDEV_RATEMASK_CMDID, 1761 WMI_10_4_CSA_OFFLOAD_ENABLE_CMDID, 1762 WMI_10_4_GTK_OFFLOAD_CMDID, 1763 WMI_10_4_QBOOST_CFG_CMDID, 1764 WMI_10_4_CSA_OFFLOAD_CHANSWITCH_CMDID, 1765 WMI_10_4_PDEV_SMART_ANT_ENABLE_CMDID, 1766 WMI_10_4_PDEV_SMART_ANT_SET_RX_ANTENNA_CMDID, 1767 WMI_10_4_PEER_SMART_ANT_SET_TX_ANTENNA_CMDID, 1768 WMI_10_4_PEER_SMART_ANT_SET_TRAIN_INFO_CMDID, 1769 WMI_10_4_PEER_SMART_ANT_SET_NODE_CONFIG_OPS_CMDID, 1770 WMI_10_4_VDEV_SET_KEEPALIVE_CMDID, 1771 WMI_10_4_VDEV_GET_KEEPALIVE_CMDID, 1772 WMI_10_4_FORCE_FW_HANG_CMDID, 1773 WMI_10_4_PDEV_SET_ANTENNA_SWITCH_TABLE_CMDID, 1774 WMI_10_4_PDEV_SET_CTL_TABLE_CMDID, 1775 WMI_10_4_PDEV_SET_MIMOGAIN_TABLE_CMDID, 1776 WMI_10_4_PDEV_RATEPWR_TABLE_CMDID, 1777 WMI_10_4_PDEV_RATEPWR_CHAINMSK_TABLE_CMDID, 1778 WMI_10_4_PDEV_FIPS_CMDID, 1779 WMI_10_4_TT_SET_CONF_CMDID, 1780 WMI_10_4_FWTEST_CMDID, 1781 WMI_10_4_VDEV_ATF_REQUEST_CMDID, 1782 WMI_10_4_PEER_ATF_REQUEST_CMDID, 1783 WMI_10_4_PDEV_GET_ANI_CCK_CONFIG_CMDID, 1784 WMI_10_4_PDEV_GET_ANI_OFDM_CONFIG_CMDID, 1785 WMI_10_4_PDEV_RESERVE_AST_ENTRY_CMDID, 1786 WMI_10_4_PDEV_GET_NFCAL_POWER_CMDID, 1787 WMI_10_4_PDEV_GET_TPC_CMDID, 1788 WMI_10_4_PDEV_GET_AST_INFO_CMDID, 1789 WMI_10_4_VDEV_SET_DSCP_TID_MAP_CMDID, 1790 WMI_10_4_PDEV_GET_TEMPERATURE_CMDID, 1791 WMI_10_4_PDEV_GET_INFO_CMDID, 1792 WMI_10_4_VDEV_GET_INFO_CMDID, 1793 WMI_10_4_VDEV_FILTER_NEIGHBOR_RX_PACKETS_CMDID, 1794 WMI_10_4_MU_CAL_START_CMDID, 1795 WMI_10_4_SET_CCA_PARAMS_CMDID, 1796 WMI_10_4_PDEV_BSS_CHAN_INFO_REQUEST_CMDID, 1797 WMI_10_4_EXT_RESOURCE_CFG_CMDID, 1798 WMI_10_4_VDEV_SET_IE_CMDID, 1799 WMI_10_4_SET_LTEU_CONFIG_CMDID, 1800 WMI_10_4_ATF_SSID_GROUPING_REQUEST_CMDID, 1801 WMI_10_4_PEER_ATF_EXT_REQUEST_CMDID, 1802 WMI_10_4_SET_PERIODIC_CHANNEL_STATS_CONFIG, 1803 WMI_10_4_PEER_BWF_REQUEST_CMDID, 1804 WMI_10_4_BTCOEX_CFG_CMDID, 1805 WMI_10_4_PEER_TX_MU_TXMIT_COUNT_CMDID, 1806 WMI_10_4_PEER_TX_MU_TXMIT_RSTCNT_CMDID, 1807 WMI_10_4_PEER_GID_USERPOS_LIST_CMDID, 1808 WMI_10_4_PDEV_CHECK_CAL_VERSION_CMDID, 1809 WMI_10_4_COEX_VERSION_CFG_CMID, 1810 WMI_10_4_PDEV_GET_RX_FILTER_CMDID, 1811 WMI_10_4_PDEV_EXTENDED_NSS_CFG_CMDID, 1812 WMI_10_4_VDEV_SET_SCAN_NAC_RSSI_CMDID, 1813 WMI_10_4_PROG_GPIO_BAND_SELECT_CMDID, 1814 WMI_10_4_CONFIG_SMART_LOGGING_CMDID, 1815 WMI_10_4_DEBUG_FATAL_CONDITION_CMDID, 1816 WMI_10_4_GET_TSF_TIMER_CMDID, 1817 WMI_10_4_PDEV_GET_TPC_TABLE_CMDID, 1818 WMI_10_4_VDEV_SIFS_TRIGGER_TIME_CMDID, 1819 WMI_10_4_PDEV_WDS_ENTRY_LIST_CMDID, 1820 WMI_10_4_TDLS_SET_STATE_CMDID, 1821 WMI_10_4_TDLS_PEER_UPDATE_CMDID, 1822 WMI_10_4_TDLS_SET_OFFCHAN_MODE_CMDID, 1823 WMI_10_4_PDEV_SEND_FD_CMDID, 1824 WMI_10_4_ENABLE_FILS_CMDID, 1825 WMI_10_4_PDEV_SET_BRIDGE_MACADDR_CMDID, 1826 WMI_10_4_ATF_GROUP_WMM_AC_CONFIG_REQUEST_CMDID, 1827 WMI_10_4_RADAR_FOUND_CMDID, 1828 WMI_10_4_PDEV_UTF_CMDID = WMI_10_4_END_CMDID - 1, 1829 }; 1830 1831 enum wmi_10_4_event_id { 1832 WMI_10_4_SERVICE_READY_EVENTID = 0x8000, 1833 WMI_10_4_READY_EVENTID, 1834 WMI_10_4_DEBUG_MESG_EVENTID, 1835 WMI_10_4_START_EVENTID = 0x9000, 1836 WMI_10_4_END_EVENTID = 0x9FFF, 1837 WMI_10_4_SCAN_EVENTID = WMI_10_4_START_EVENTID, 1838 WMI_10_4_ECHO_EVENTID, 1839 WMI_10_4_UPDATE_STATS_EVENTID, 1840 WMI_10_4_INST_RSSI_STATS_EVENTID, 1841 WMI_10_4_VDEV_START_RESP_EVENTID, 1842 WMI_10_4_VDEV_STANDBY_REQ_EVENTID, 1843 WMI_10_4_VDEV_RESUME_REQ_EVENTID, 1844 WMI_10_4_VDEV_STOPPED_EVENTID, 1845 WMI_10_4_PEER_STA_KICKOUT_EVENTID, 1846 WMI_10_4_HOST_SWBA_EVENTID, 1847 WMI_10_4_TBTTOFFSET_UPDATE_EVENTID, 1848 WMI_10_4_MGMT_RX_EVENTID, 1849 WMI_10_4_CHAN_INFO_EVENTID, 1850 WMI_10_4_PHYERR_EVENTID, 1851 WMI_10_4_ROAM_EVENTID, 1852 WMI_10_4_PROFILE_MATCH, 1853 WMI_10_4_DEBUG_PRINT_EVENTID, 1854 WMI_10_4_PDEV_QVIT_EVENTID, 1855 WMI_10_4_WLAN_PROFILE_DATA_EVENTID, 1856 WMI_10_4_RTT_MEASUREMENT_REPORT_EVENTID, 1857 WMI_10_4_TSF_MEASUREMENT_REPORT_EVENTID, 1858 WMI_10_4_RTT_ERROR_REPORT_EVENTID, 1859 WMI_10_4_RTT_KEEPALIVE_EVENTID, 1860 WMI_10_4_OEM_CAPABILITY_EVENTID, 1861 WMI_10_4_OEM_MEASUREMENT_REPORT_EVENTID, 1862 WMI_10_4_OEM_ERROR_REPORT_EVENTID, 1863 WMI_10_4_NAN_EVENTID, 1864 WMI_10_4_WOW_WAKEUP_HOST_EVENTID, 1865 WMI_10_4_GTK_OFFLOAD_STATUS_EVENTID, 1866 WMI_10_4_GTK_REKEY_FAIL_EVENTID, 1867 WMI_10_4_DCS_INTERFERENCE_EVENTID, 1868 WMI_10_4_PDEV_TPC_CONFIG_EVENTID, 1869 WMI_10_4_CSA_HANDLING_EVENTID, 1870 WMI_10_4_GPIO_INPUT_EVENTID, 1871 WMI_10_4_PEER_RATECODE_LIST_EVENTID, 1872 WMI_10_4_GENERIC_BUFFER_EVENTID, 1873 WMI_10_4_MCAST_BUF_RELEASE_EVENTID, 1874 WMI_10_4_MCAST_LIST_AGEOUT_EVENTID, 1875 WMI_10_4_VDEV_GET_KEEPALIVE_EVENTID, 1876 WMI_10_4_WDS_PEER_EVENTID, 1877 WMI_10_4_PEER_STA_PS_STATECHG_EVENTID, 1878 WMI_10_4_PDEV_FIPS_EVENTID, 1879 WMI_10_4_TT_STATS_EVENTID, 1880 WMI_10_4_PDEV_CHANNEL_HOPPING_EVENTID, 1881 WMI_10_4_PDEV_ANI_CCK_LEVEL_EVENTID, 1882 WMI_10_4_PDEV_ANI_OFDM_LEVEL_EVENTID, 1883 WMI_10_4_PDEV_RESERVE_AST_ENTRY_EVENTID, 1884 WMI_10_4_PDEV_NFCAL_POWER_EVENTID, 1885 WMI_10_4_PDEV_TPC_EVENTID, 1886 WMI_10_4_PDEV_GET_AST_INFO_EVENTID, 1887 WMI_10_4_PDEV_TEMPERATURE_EVENTID, 1888 WMI_10_4_PDEV_NFCAL_POWER_ALL_CHANNELS_EVENTID, 1889 WMI_10_4_PDEV_BSS_CHAN_INFO_EVENTID, 1890 WMI_10_4_MU_REPORT_EVENTID, 1891 WMI_10_4_TX_DATA_TRAFFIC_CTRL_EVENTID, 1892 WMI_10_4_PEER_TX_MU_TXMIT_COUNT_EVENTID, 1893 WMI_10_4_PEER_GID_USERPOS_LIST_EVENTID, 1894 WMI_10_4_PDEV_CHECK_CAL_VERSION_EVENTID, 1895 WMI_10_4_ATF_PEER_STATS_EVENTID, 1896 WMI_10_4_PDEV_GET_RX_FILTER_EVENTID, 1897 WMI_10_4_NAC_RSSI_EVENTID, 1898 WMI_10_4_DEBUG_FATAL_CONDITION_EVENTID, 1899 WMI_10_4_GET_TSF_TIMER_RESP_EVENTID, 1900 WMI_10_4_PDEV_TPC_TABLE_EVENTID, 1901 WMI_10_4_PDEV_WDS_ENTRY_LIST_EVENTID, 1902 WMI_10_4_TDLS_PEER_EVENTID, 1903 WMI_10_4_HOST_SWFDA_EVENTID, 1904 WMI_10_4_ESP_ESTIMATE_EVENTID, 1905 WMI_10_4_DFS_STATUS_CHECK_EVENTID, 1906 WMI_10_4_PDEV_UTF_EVENTID = WMI_10_4_END_EVENTID - 1, 1907 }; 1908 1909 enum wmi_phy_mode { 1910 MODE_11A = 0, /* 11a Mode */ 1911 MODE_11G = 1, /* 11b/g Mode */ 1912 MODE_11B = 2, /* 11b Mode */ 1913 MODE_11GONLY = 3, /* 11g only Mode */ 1914 MODE_11NA_HT20 = 4, /* 11a HT20 mode */ 1915 MODE_11NG_HT20 = 5, /* 11g HT20 mode */ 1916 MODE_11NA_HT40 = 6, /* 11a HT40 mode */ 1917 MODE_11NG_HT40 = 7, /* 11g HT40 mode */ 1918 MODE_11AC_VHT20 = 8, 1919 MODE_11AC_VHT40 = 9, 1920 MODE_11AC_VHT80 = 10, 1921 /* MODE_11AC_VHT160 = 11, */ 1922 MODE_11AC_VHT20_2G = 11, 1923 MODE_11AC_VHT40_2G = 12, 1924 MODE_11AC_VHT80_2G = 13, 1925 MODE_11AC_VHT80_80 = 14, 1926 MODE_11AC_VHT160 = 15, 1927 MODE_UNKNOWN = 16, 1928 MODE_MAX = 16 1929 }; 1930 1931 static inline const char *ath10k_wmi_phymode_str(enum wmi_phy_mode mode) 1932 { 1933 switch (mode) { 1934 case MODE_11A: 1935 return "11a"; 1936 case MODE_11G: 1937 return "11g"; 1938 case MODE_11B: 1939 return "11b"; 1940 case MODE_11GONLY: 1941 return "11gonly"; 1942 case MODE_11NA_HT20: 1943 return "11na-ht20"; 1944 case MODE_11NG_HT20: 1945 return "11ng-ht20"; 1946 case MODE_11NA_HT40: 1947 return "11na-ht40"; 1948 case MODE_11NG_HT40: 1949 return "11ng-ht40"; 1950 case MODE_11AC_VHT20: 1951 return "11ac-vht20"; 1952 case MODE_11AC_VHT40: 1953 return "11ac-vht40"; 1954 case MODE_11AC_VHT80: 1955 return "11ac-vht80"; 1956 case MODE_11AC_VHT160: 1957 return "11ac-vht160"; 1958 case MODE_11AC_VHT80_80: 1959 return "11ac-vht80+80"; 1960 case MODE_11AC_VHT20_2G: 1961 return "11ac-vht20-2g"; 1962 case MODE_11AC_VHT40_2G: 1963 return "11ac-vht40-2g"; 1964 case MODE_11AC_VHT80_2G: 1965 return "11ac-vht80-2g"; 1966 case MODE_UNKNOWN: 1967 /* skip */ 1968 break; 1969 1970 /* no default handler to allow compiler to check that the 1971 * enum is fully handled 1972 */ 1973 }; 1974 1975 return "<unknown>"; 1976 } 1977 1978 #define WMI_CHAN_LIST_TAG 0x1 1979 #define WMI_SSID_LIST_TAG 0x2 1980 #define WMI_BSSID_LIST_TAG 0x3 1981 #define WMI_IE_TAG 0x4 1982 1983 struct wmi_channel { 1984 __le32 mhz; 1985 __le32 band_center_freq1; 1986 __le32 band_center_freq2; /* valid for 11ac, 80plus80 */ 1987 union { 1988 __le32 flags; /* WMI_CHAN_FLAG_ */ 1989 struct { 1990 u8 mode; /* only 6 LSBs */ 1991 } __packed; 1992 } __packed; 1993 union { 1994 __le32 reginfo0; 1995 struct { 1996 /* note: power unit is 0.5 dBm */ 1997 u8 min_power; 1998 u8 max_power; 1999 u8 reg_power; 2000 u8 reg_classid; 2001 } __packed; 2002 } __packed; 2003 union { 2004 __le32 reginfo1; 2005 struct { 2006 u8 antenna_max; 2007 u8 max_tx_power; 2008 } __packed; 2009 } __packed; 2010 } __packed; 2011 2012 struct wmi_channel_arg { 2013 u32 freq; 2014 u32 band_center_freq1; 2015 u32 band_center_freq2; 2016 bool passive; 2017 bool allow_ibss; 2018 bool allow_ht; 2019 bool allow_vht; 2020 bool ht40plus; 2021 bool chan_radar; 2022 /* note: power unit is 0.5 dBm */ 2023 u32 min_power; 2024 u32 max_power; 2025 u32 max_reg_power; 2026 u32 max_antenna_gain; 2027 u32 reg_class_id; 2028 enum wmi_phy_mode mode; 2029 }; 2030 2031 enum wmi_channel_change_cause { 2032 WMI_CHANNEL_CHANGE_CAUSE_NONE = 0, 2033 WMI_CHANNEL_CHANGE_CAUSE_CSA, 2034 }; 2035 2036 #define WMI_CHAN_FLAG_HT40_PLUS (1 << 6) 2037 #define WMI_CHAN_FLAG_PASSIVE (1 << 7) 2038 #define WMI_CHAN_FLAG_ADHOC_ALLOWED (1 << 8) 2039 #define WMI_CHAN_FLAG_AP_DISABLED (1 << 9) 2040 #define WMI_CHAN_FLAG_DFS (1 << 10) 2041 #define WMI_CHAN_FLAG_ALLOW_HT (1 << 11) 2042 #define WMI_CHAN_FLAG_ALLOW_VHT (1 << 12) 2043 2044 /* Indicate reason for channel switch */ 2045 #define WMI_CHANNEL_CHANGE_CAUSE_CSA (1 << 13) 2046 2047 #define WMI_MAX_SPATIAL_STREAM 3 /* default max ss */ 2048 2049 /* HT Capabilities*/ 2050 #define WMI_HT_CAP_ENABLED 0x0001 /* HT Enabled/ disabled */ 2051 #define WMI_HT_CAP_HT20_SGI 0x0002 /* Short Guard Interval with HT20 */ 2052 #define WMI_HT_CAP_DYNAMIC_SMPS 0x0004 /* Dynamic MIMO powersave */ 2053 #define WMI_HT_CAP_TX_STBC 0x0008 /* B3 TX STBC */ 2054 #define WMI_HT_CAP_TX_STBC_MASK_SHIFT 3 2055 #define WMI_HT_CAP_RX_STBC 0x0030 /* B4-B5 RX STBC */ 2056 #define WMI_HT_CAP_RX_STBC_MASK_SHIFT 4 2057 #define WMI_HT_CAP_LDPC 0x0040 /* LDPC supported */ 2058 #define WMI_HT_CAP_L_SIG_TXOP_PROT 0x0080 /* L-SIG TXOP Protection */ 2059 #define WMI_HT_CAP_MPDU_DENSITY 0x0700 /* MPDU Density */ 2060 #define WMI_HT_CAP_MPDU_DENSITY_MASK_SHIFT 8 2061 #define WMI_HT_CAP_HT40_SGI 0x0800 2062 2063 #define WMI_HT_CAP_DEFAULT_ALL (WMI_HT_CAP_ENABLED | \ 2064 WMI_HT_CAP_HT20_SGI | \ 2065 WMI_HT_CAP_HT40_SGI | \ 2066 WMI_HT_CAP_TX_STBC | \ 2067 WMI_HT_CAP_RX_STBC | \ 2068 WMI_HT_CAP_LDPC) 2069 2070 /* 2071 * WMI_VHT_CAP_* these maps to ieee 802.11ac vht capability information 2072 * field. The fields not defined here are not supported, or reserved. 2073 * Do not change these masks and if you have to add new one follow the 2074 * bitmask as specified by 802.11ac draft. 2075 */ 2076 2077 #define WMI_VHT_CAP_MAX_MPDU_LEN_MASK 0x00000003 2078 #define WMI_VHT_CAP_RX_LDPC 0x00000010 2079 #define WMI_VHT_CAP_SGI_80MHZ 0x00000020 2080 #define WMI_VHT_CAP_SGI_160MHZ 0x00000040 2081 #define WMI_VHT_CAP_TX_STBC 0x00000080 2082 #define WMI_VHT_CAP_RX_STBC_MASK 0x00000300 2083 #define WMI_VHT_CAP_RX_STBC_MASK_SHIFT 8 2084 #define WMI_VHT_CAP_SU_BFER 0x00000800 2085 #define WMI_VHT_CAP_SU_BFEE 0x00001000 2086 #define WMI_VHT_CAP_MAX_CS_ANT_MASK 0x0000E000 2087 #define WMI_VHT_CAP_MAX_CS_ANT_MASK_SHIFT 13 2088 #define WMI_VHT_CAP_MAX_SND_DIM_MASK 0x00070000 2089 #define WMI_VHT_CAP_MAX_SND_DIM_MASK_SHIFT 16 2090 #define WMI_VHT_CAP_MU_BFER 0x00080000 2091 #define WMI_VHT_CAP_MU_BFEE 0x00100000 2092 #define WMI_VHT_CAP_MAX_AMPDU_LEN_EXP 0x03800000 2093 #define WMI_VHT_CAP_MAX_AMPDU_LEN_EXP_SHIFT 23 2094 #define WMI_VHT_CAP_RX_FIXED_ANT 0x10000000 2095 #define WMI_VHT_CAP_TX_FIXED_ANT 0x20000000 2096 2097 /* The following also refer for max HT AMSDU */ 2098 #define WMI_VHT_CAP_MAX_MPDU_LEN_3839 0x00000000 2099 #define WMI_VHT_CAP_MAX_MPDU_LEN_7935 0x00000001 2100 #define WMI_VHT_CAP_MAX_MPDU_LEN_11454 0x00000002 2101 2102 #define WMI_VHT_CAP_DEFAULT_ALL (WMI_VHT_CAP_MAX_MPDU_LEN_11454 | \ 2103 WMI_VHT_CAP_RX_LDPC | \ 2104 WMI_VHT_CAP_SGI_80MHZ | \ 2105 WMI_VHT_CAP_TX_STBC | \ 2106 WMI_VHT_CAP_RX_STBC_MASK | \ 2107 WMI_VHT_CAP_MAX_AMPDU_LEN_EXP | \ 2108 WMI_VHT_CAP_RX_FIXED_ANT | \ 2109 WMI_VHT_CAP_TX_FIXED_ANT) 2110 2111 /* 2112 * Interested readers refer to Rx/Tx MCS Map definition as defined in 2113 * 802.11ac 2114 */ 2115 #define WMI_VHT_MAX_MCS_4_SS_MASK(r, ss) ((3 & (r)) << (((ss) - 1) << 1)) 2116 #define WMI_VHT_MAX_SUPP_RATE_MASK 0x1fff0000 2117 #define WMI_VHT_MAX_SUPP_RATE_MASK_SHIFT 16 2118 2119 enum { 2120 REGDMN_MODE_11A = 0x00001, /* 11a channels */ 2121 REGDMN_MODE_TURBO = 0x00002, /* 11a turbo-only channels */ 2122 REGDMN_MODE_11B = 0x00004, /* 11b channels */ 2123 REGDMN_MODE_PUREG = 0x00008, /* 11g channels (OFDM only) */ 2124 REGDMN_MODE_11G = 0x00008, /* XXX historical */ 2125 REGDMN_MODE_108G = 0x00020, /* 11a+Turbo channels */ 2126 REGDMN_MODE_108A = 0x00040, /* 11g+Turbo channels */ 2127 REGDMN_MODE_XR = 0x00100, /* XR channels */ 2128 REGDMN_MODE_11A_HALF_RATE = 0x00200, /* 11A half rate channels */ 2129 REGDMN_MODE_11A_QUARTER_RATE = 0x00400, /* 11A quarter rate channels */ 2130 REGDMN_MODE_11NG_HT20 = 0x00800, /* 11N-G HT20 channels */ 2131 REGDMN_MODE_11NA_HT20 = 0x01000, /* 11N-A HT20 channels */ 2132 REGDMN_MODE_11NG_HT40PLUS = 0x02000, /* 11N-G HT40 + channels */ 2133 REGDMN_MODE_11NG_HT40MINUS = 0x04000, /* 11N-G HT40 - channels */ 2134 REGDMN_MODE_11NA_HT40PLUS = 0x08000, /* 11N-A HT40 + channels */ 2135 REGDMN_MODE_11NA_HT40MINUS = 0x10000, /* 11N-A HT40 - channels */ 2136 REGDMN_MODE_11AC_VHT20 = 0x20000, /* 5Ghz, VHT20 */ 2137 REGDMN_MODE_11AC_VHT40PLUS = 0x40000, /* 5Ghz, VHT40 + channels */ 2138 REGDMN_MODE_11AC_VHT40MINUS = 0x80000, /* 5Ghz VHT40 - channels */ 2139 REGDMN_MODE_11AC_VHT80 = 0x100000, /* 5Ghz, VHT80 channels */ 2140 REGDMN_MODE_11AC_VHT160 = 0x200000, /* 5Ghz, VHT160 channels */ 2141 REGDMN_MODE_11AC_VHT80_80 = 0x400000, /* 5Ghz, VHT80+80 channels */ 2142 REGDMN_MODE_ALL = 0xffffffff 2143 }; 2144 2145 #define REGDMN_CAP1_CHAN_HALF_RATE 0x00000001 2146 #define REGDMN_CAP1_CHAN_QUARTER_RATE 0x00000002 2147 #define REGDMN_CAP1_CHAN_HAL49GHZ 0x00000004 2148 2149 /* regulatory capabilities */ 2150 #define REGDMN_EEPROM_EEREGCAP_EN_FCC_MIDBAND 0x0040 2151 #define REGDMN_EEPROM_EEREGCAP_EN_KK_U1_EVEN 0x0080 2152 #define REGDMN_EEPROM_EEREGCAP_EN_KK_U2 0x0100 2153 #define REGDMN_EEPROM_EEREGCAP_EN_KK_MIDBAND 0x0200 2154 #define REGDMN_EEPROM_EEREGCAP_EN_KK_U1_ODD 0x0400 2155 #define REGDMN_EEPROM_EEREGCAP_EN_KK_NEW_11A 0x0800 2156 2157 struct hal_reg_capabilities { 2158 /* regdomain value specified in EEPROM */ 2159 __le32 eeprom_rd; 2160 /*regdomain */ 2161 __le32 eeprom_rd_ext; 2162 /* CAP1 capabilities bit map. */ 2163 __le32 regcap1; 2164 /* REGDMN EEPROM CAP. */ 2165 __le32 regcap2; 2166 /* REGDMN MODE */ 2167 __le32 wireless_modes; 2168 __le32 low_2ghz_chan; 2169 __le32 high_2ghz_chan; 2170 __le32 low_5ghz_chan; 2171 __le32 high_5ghz_chan; 2172 } __packed; 2173 2174 enum wlan_mode_capability { 2175 WHAL_WLAN_11A_CAPABILITY = 0x1, 2176 WHAL_WLAN_11G_CAPABILITY = 0x2, 2177 WHAL_WLAN_11AG_CAPABILITY = 0x3, 2178 }; 2179 2180 /* structure used by FW for requesting host memory */ 2181 struct wlan_host_mem_req { 2182 /* ID of the request */ 2183 __le32 req_id; 2184 /* size of the of each unit */ 2185 __le32 unit_size; 2186 /* flags to indicate that 2187 * the number units is dependent 2188 * on number of resources(num vdevs num peers .. etc) 2189 */ 2190 __le32 num_unit_info; 2191 /* 2192 * actual number of units to allocate . if flags in the num_unit_info 2193 * indicate that number of units is tied to number of a particular 2194 * resource to allocate then num_units filed is set to 0 and host 2195 * will derive the number units from number of the resources it is 2196 * requesting. 2197 */ 2198 __le32 num_units; 2199 } __packed; 2200 2201 /* 2202 * The following struct holds optional payload for 2203 * wmi_service_ready_event,e.g., 11ac pass some of the 2204 * device capability to the host. 2205 */ 2206 struct wmi_service_ready_event { 2207 __le32 sw_version; 2208 __le32 sw_version_1; 2209 __le32 abi_version; 2210 /* WMI_PHY_CAPABILITY */ 2211 __le32 phy_capability; 2212 /* Maximum number of frag table entries that SW will populate less 1 */ 2213 __le32 max_frag_entry; 2214 __le32 wmi_service_bitmap[16]; 2215 __le32 num_rf_chains; 2216 /* 2217 * The following field is only valid for service type 2218 * WMI_SERVICE_11AC 2219 */ 2220 __le32 ht_cap_info; /* WMI HT Capability */ 2221 __le32 vht_cap_info; /* VHT capability info field of 802.11ac */ 2222 __le32 vht_supp_mcs; /* VHT Supported MCS Set field Rx/Tx same */ 2223 __le32 hw_min_tx_power; 2224 __le32 hw_max_tx_power; 2225 struct hal_reg_capabilities hal_reg_capabilities; 2226 __le32 sys_cap_info; 2227 __le32 min_pkt_size_enable; /* Enterprise mode short pkt enable */ 2228 /* 2229 * Max beacon and Probe Response IE offload size 2230 * (includes optional P2P IEs) 2231 */ 2232 __le32 max_bcn_ie_size; 2233 /* 2234 * request to host to allocate a chuck of memory and pss it down to FW 2235 * via WM_INIT. FW uses this as FW extesnsion memory for saving its 2236 * data structures. Only valid for low latency interfaces like PCIE 2237 * where FW can access this memory directly (or) by DMA. 2238 */ 2239 __le32 num_mem_reqs; 2240 struct wlan_host_mem_req mem_reqs[0]; 2241 } __packed; 2242 2243 /* This is the definition from 10.X firmware branch */ 2244 struct wmi_10x_service_ready_event { 2245 __le32 sw_version; 2246 __le32 abi_version; 2247 2248 /* WMI_PHY_CAPABILITY */ 2249 __le32 phy_capability; 2250 2251 /* Maximum number of frag table entries that SW will populate less 1 */ 2252 __le32 max_frag_entry; 2253 __le32 wmi_service_bitmap[16]; 2254 __le32 num_rf_chains; 2255 2256 /* 2257 * The following field is only valid for service type 2258 * WMI_SERVICE_11AC 2259 */ 2260 __le32 ht_cap_info; /* WMI HT Capability */ 2261 __le32 vht_cap_info; /* VHT capability info field of 802.11ac */ 2262 __le32 vht_supp_mcs; /* VHT Supported MCS Set field Rx/Tx same */ 2263 __le32 hw_min_tx_power; 2264 __le32 hw_max_tx_power; 2265 2266 struct hal_reg_capabilities hal_reg_capabilities; 2267 2268 __le32 sys_cap_info; 2269 __le32 min_pkt_size_enable; /* Enterprise mode short pkt enable */ 2270 2271 /* 2272 * request to host to allocate a chuck of memory and pss it down to FW 2273 * via WM_INIT. FW uses this as FW extesnsion memory for saving its 2274 * data structures. Only valid for low latency interfaces like PCIE 2275 * where FW can access this memory directly (or) by DMA. 2276 */ 2277 __le32 num_mem_reqs; 2278 2279 struct wlan_host_mem_req mem_reqs[0]; 2280 } __packed; 2281 2282 #define WMI_SERVICE_READY_TIMEOUT_HZ (5 * HZ) 2283 #define WMI_UNIFIED_READY_TIMEOUT_HZ (5 * HZ) 2284 2285 struct wmi_ready_event { 2286 __le32 sw_version; 2287 __le32 abi_version; 2288 struct wmi_mac_addr mac_addr; 2289 __le32 status; 2290 } __packed; 2291 2292 struct wmi_resource_config { 2293 /* number of virtual devices (VAPs) to support */ 2294 __le32 num_vdevs; 2295 2296 /* number of peer nodes to support */ 2297 __le32 num_peers; 2298 2299 /* 2300 * In offload mode target supports features like WOW, chatter and 2301 * other protocol offloads. In order to support them some 2302 * functionalities like reorder buffering, PN checking need to be 2303 * done in target. This determines maximum number of peers supported 2304 * by target in offload mode 2305 */ 2306 __le32 num_offload_peers; 2307 2308 /* For target-based RX reordering */ 2309 __le32 num_offload_reorder_bufs; 2310 2311 /* number of keys per peer */ 2312 __le32 num_peer_keys; 2313 2314 /* total number of TX/RX data TIDs */ 2315 __le32 num_tids; 2316 2317 /* 2318 * max skid for resolving hash collisions 2319 * 2320 * The address search table is sparse, so that if two MAC addresses 2321 * result in the same hash value, the second of these conflicting 2322 * entries can slide to the next index in the address search table, 2323 * and use it, if it is unoccupied. This ast_skid_limit parameter 2324 * specifies the upper bound on how many subsequent indices to search 2325 * over to find an unoccupied space. 2326 */ 2327 __le32 ast_skid_limit; 2328 2329 /* 2330 * the nominal chain mask for transmit 2331 * 2332 * The chain mask may be modified dynamically, e.g. to operate AP 2333 * tx with a reduced number of chains if no clients are associated. 2334 * This configuration parameter specifies the nominal chain-mask that 2335 * should be used when not operating with a reduced set of tx chains. 2336 */ 2337 __le32 tx_chain_mask; 2338 2339 /* 2340 * the nominal chain mask for receive 2341 * 2342 * The chain mask may be modified dynamically, e.g. for a client 2343 * to use a reduced number of chains for receive if the traffic to 2344 * the client is low enough that it doesn't require downlink MIMO 2345 * or antenna diversity. 2346 * This configuration parameter specifies the nominal chain-mask that 2347 * should be used when not operating with a reduced set of rx chains. 2348 */ 2349 __le32 rx_chain_mask; 2350 2351 /* 2352 * what rx reorder timeout (ms) to use for the AC 2353 * 2354 * Each WMM access class (voice, video, best-effort, background) will 2355 * have its own timeout value to dictate how long to wait for missing 2356 * rx MPDUs to arrive before flushing subsequent MPDUs that have 2357 * already been received. 2358 * This parameter specifies the timeout in milliseconds for each 2359 * class. 2360 */ 2361 __le32 rx_timeout_pri_vi; 2362 __le32 rx_timeout_pri_vo; 2363 __le32 rx_timeout_pri_be; 2364 __le32 rx_timeout_pri_bk; 2365 2366 /* 2367 * what mode the rx should decap packets to 2368 * 2369 * MAC can decap to RAW (no decap), native wifi or Ethernet types 2370 * THis setting also determines the default TX behavior, however TX 2371 * behavior can be modified on a per VAP basis during VAP init 2372 */ 2373 __le32 rx_decap_mode; 2374 2375 /* what is the maximum number of scan requests that can be queued */ 2376 __le32 scan_max_pending_reqs; 2377 2378 /* maximum VDEV that could use BMISS offload */ 2379 __le32 bmiss_offload_max_vdev; 2380 2381 /* maximum VDEV that could use offload roaming */ 2382 __le32 roam_offload_max_vdev; 2383 2384 /* maximum AP profiles that would push to offload roaming */ 2385 __le32 roam_offload_max_ap_profiles; 2386 2387 /* 2388 * how many groups to use for mcast->ucast conversion 2389 * 2390 * The target's WAL maintains a table to hold information regarding 2391 * which peers belong to a given multicast group, so that if 2392 * multicast->unicast conversion is enabled, the target can convert 2393 * multicast tx frames to a series of unicast tx frames, to each 2394 * peer within the multicast group. 2395 This num_mcast_groups configuration parameter tells the target how 2396 * many multicast groups to provide storage for within its multicast 2397 * group membership table. 2398 */ 2399 __le32 num_mcast_groups; 2400 2401 /* 2402 * size to alloc for the mcast membership table 2403 * 2404 * This num_mcast_table_elems configuration parameter tells the 2405 * target how many peer elements it needs to provide storage for in 2406 * its multicast group membership table. 2407 * These multicast group membership table elements are shared by the 2408 * multicast groups stored within the table. 2409 */ 2410 __le32 num_mcast_table_elems; 2411 2412 /* 2413 * whether/how to do multicast->unicast conversion 2414 * 2415 * This configuration parameter specifies whether the target should 2416 * perform multicast --> unicast conversion on transmit, and if so, 2417 * what to do if it finds no entries in its multicast group 2418 * membership table for the multicast IP address in the tx frame. 2419 * Configuration value: 2420 * 0 -> Do not perform multicast to unicast conversion. 2421 * 1 -> Convert multicast frames to unicast, if the IP multicast 2422 * address from the tx frame is found in the multicast group 2423 * membership table. If the IP multicast address is not found, 2424 * drop the frame. 2425 * 2 -> Convert multicast frames to unicast, if the IP multicast 2426 * address from the tx frame is found in the multicast group 2427 * membership table. If the IP multicast address is not found, 2428 * transmit the frame as multicast. 2429 */ 2430 __le32 mcast2ucast_mode; 2431 2432 /* 2433 * how much memory to allocate for a tx PPDU dbg log 2434 * 2435 * This parameter controls how much memory the target will allocate 2436 * to store a log of tx PPDU meta-information (how large the PPDU 2437 * was, when it was sent, whether it was successful, etc.) 2438 */ 2439 __le32 tx_dbg_log_size; 2440 2441 /* how many AST entries to be allocated for WDS */ 2442 __le32 num_wds_entries; 2443 2444 /* 2445 * MAC DMA burst size, e.g., For target PCI limit can be 2446 * 0 -default, 1 256B 2447 */ 2448 __le32 dma_burst_size; 2449 2450 /* 2451 * Fixed delimiters to be inserted after every MPDU to 2452 * account for interface latency to avoid underrun. 2453 */ 2454 __le32 mac_aggr_delim; 2455 2456 /* 2457 * determine whether target is responsible for detecting duplicate 2458 * non-aggregate MPDU and timing out stale fragments. 2459 * 2460 * A-MPDU reordering is always performed on the target. 2461 * 2462 * 0: target responsible for frag timeout and dup checking 2463 * 1: host responsible for frag timeout and dup checking 2464 */ 2465 __le32 rx_skip_defrag_timeout_dup_detection_check; 2466 2467 /* 2468 * Configuration for VoW : 2469 * No of Video Nodes to be supported 2470 * and Max no of descriptors for each Video link (node). 2471 */ 2472 __le32 vow_config; 2473 2474 /* maximum VDEV that could use GTK offload */ 2475 __le32 gtk_offload_max_vdev; 2476 2477 /* Number of msdu descriptors target should use */ 2478 __le32 num_msdu_desc; 2479 2480 /* 2481 * Max. number of Tx fragments per MSDU 2482 * This parameter controls the max number of Tx fragments per MSDU. 2483 * This is sent by the target as part of the WMI_SERVICE_READY event 2484 * and is overridden by the OS shim as required. 2485 */ 2486 __le32 max_frag_entries; 2487 } __packed; 2488 2489 struct wmi_resource_config_10x { 2490 /* number of virtual devices (VAPs) to support */ 2491 __le32 num_vdevs; 2492 2493 /* number of peer nodes to support */ 2494 __le32 num_peers; 2495 2496 /* number of keys per peer */ 2497 __le32 num_peer_keys; 2498 2499 /* total number of TX/RX data TIDs */ 2500 __le32 num_tids; 2501 2502 /* 2503 * max skid for resolving hash collisions 2504 * 2505 * The address search table is sparse, so that if two MAC addresses 2506 * result in the same hash value, the second of these conflicting 2507 * entries can slide to the next index in the address search table, 2508 * and use it, if it is unoccupied. This ast_skid_limit parameter 2509 * specifies the upper bound on how many subsequent indices to search 2510 * over to find an unoccupied space. 2511 */ 2512 __le32 ast_skid_limit; 2513 2514 /* 2515 * the nominal chain mask for transmit 2516 * 2517 * The chain mask may be modified dynamically, e.g. to operate AP 2518 * tx with a reduced number of chains if no clients are associated. 2519 * This configuration parameter specifies the nominal chain-mask that 2520 * should be used when not operating with a reduced set of tx chains. 2521 */ 2522 __le32 tx_chain_mask; 2523 2524 /* 2525 * the nominal chain mask for receive 2526 * 2527 * The chain mask may be modified dynamically, e.g. for a client 2528 * to use a reduced number of chains for receive if the traffic to 2529 * the client is low enough that it doesn't require downlink MIMO 2530 * or antenna diversity. 2531 * This configuration parameter specifies the nominal chain-mask that 2532 * should be used when not operating with a reduced set of rx chains. 2533 */ 2534 __le32 rx_chain_mask; 2535 2536 /* 2537 * what rx reorder timeout (ms) to use for the AC 2538 * 2539 * Each WMM access class (voice, video, best-effort, background) will 2540 * have its own timeout value to dictate how long to wait for missing 2541 * rx MPDUs to arrive before flushing subsequent MPDUs that have 2542 * already been received. 2543 * This parameter specifies the timeout in milliseconds for each 2544 * class. 2545 */ 2546 __le32 rx_timeout_pri_vi; 2547 __le32 rx_timeout_pri_vo; 2548 __le32 rx_timeout_pri_be; 2549 __le32 rx_timeout_pri_bk; 2550 2551 /* 2552 * what mode the rx should decap packets to 2553 * 2554 * MAC can decap to RAW (no decap), native wifi or Ethernet types 2555 * THis setting also determines the default TX behavior, however TX 2556 * behavior can be modified on a per VAP basis during VAP init 2557 */ 2558 __le32 rx_decap_mode; 2559 2560 /* what is the maximum number of scan requests that can be queued */ 2561 __le32 scan_max_pending_reqs; 2562 2563 /* maximum VDEV that could use BMISS offload */ 2564 __le32 bmiss_offload_max_vdev; 2565 2566 /* maximum VDEV that could use offload roaming */ 2567 __le32 roam_offload_max_vdev; 2568 2569 /* maximum AP profiles that would push to offload roaming */ 2570 __le32 roam_offload_max_ap_profiles; 2571 2572 /* 2573 * how many groups to use for mcast->ucast conversion 2574 * 2575 * The target's WAL maintains a table to hold information regarding 2576 * which peers belong to a given multicast group, so that if 2577 * multicast->unicast conversion is enabled, the target can convert 2578 * multicast tx frames to a series of unicast tx frames, to each 2579 * peer within the multicast group. 2580 This num_mcast_groups configuration parameter tells the target how 2581 * many multicast groups to provide storage for within its multicast 2582 * group membership table. 2583 */ 2584 __le32 num_mcast_groups; 2585 2586 /* 2587 * size to alloc for the mcast membership table 2588 * 2589 * This num_mcast_table_elems configuration parameter tells the 2590 * target how many peer elements it needs to provide storage for in 2591 * its multicast group membership table. 2592 * These multicast group membership table elements are shared by the 2593 * multicast groups stored within the table. 2594 */ 2595 __le32 num_mcast_table_elems; 2596 2597 /* 2598 * whether/how to do multicast->unicast conversion 2599 * 2600 * This configuration parameter specifies whether the target should 2601 * perform multicast --> unicast conversion on transmit, and if so, 2602 * what to do if it finds no entries in its multicast group 2603 * membership table for the multicast IP address in the tx frame. 2604 * Configuration value: 2605 * 0 -> Do not perform multicast to unicast conversion. 2606 * 1 -> Convert multicast frames to unicast, if the IP multicast 2607 * address from the tx frame is found in the multicast group 2608 * membership table. If the IP multicast address is not found, 2609 * drop the frame. 2610 * 2 -> Convert multicast frames to unicast, if the IP multicast 2611 * address from the tx frame is found in the multicast group 2612 * membership table. If the IP multicast address is not found, 2613 * transmit the frame as multicast. 2614 */ 2615 __le32 mcast2ucast_mode; 2616 2617 /* 2618 * how much memory to allocate for a tx PPDU dbg log 2619 * 2620 * This parameter controls how much memory the target will allocate 2621 * to store a log of tx PPDU meta-information (how large the PPDU 2622 * was, when it was sent, whether it was successful, etc.) 2623 */ 2624 __le32 tx_dbg_log_size; 2625 2626 /* how many AST entries to be allocated for WDS */ 2627 __le32 num_wds_entries; 2628 2629 /* 2630 * MAC DMA burst size, e.g., For target PCI limit can be 2631 * 0 -default, 1 256B 2632 */ 2633 __le32 dma_burst_size; 2634 2635 /* 2636 * Fixed delimiters to be inserted after every MPDU to 2637 * account for interface latency to avoid underrun. 2638 */ 2639 __le32 mac_aggr_delim; 2640 2641 /* 2642 * determine whether target is responsible for detecting duplicate 2643 * non-aggregate MPDU and timing out stale fragments. 2644 * 2645 * A-MPDU reordering is always performed on the target. 2646 * 2647 * 0: target responsible for frag timeout and dup checking 2648 * 1: host responsible for frag timeout and dup checking 2649 */ 2650 __le32 rx_skip_defrag_timeout_dup_detection_check; 2651 2652 /* 2653 * Configuration for VoW : 2654 * No of Video Nodes to be supported 2655 * and Max no of descriptors for each Video link (node). 2656 */ 2657 __le32 vow_config; 2658 2659 /* Number of msdu descriptors target should use */ 2660 __le32 num_msdu_desc; 2661 2662 /* 2663 * Max. number of Tx fragments per MSDU 2664 * This parameter controls the max number of Tx fragments per MSDU. 2665 * This is sent by the target as part of the WMI_SERVICE_READY event 2666 * and is overridden by the OS shim as required. 2667 */ 2668 __le32 max_frag_entries; 2669 } __packed; 2670 2671 enum wmi_10_2_feature_mask { 2672 WMI_10_2_RX_BATCH_MODE = BIT(0), 2673 WMI_10_2_ATF_CONFIG = BIT(1), 2674 WMI_10_2_COEX_GPIO = BIT(3), 2675 WMI_10_2_BSS_CHAN_INFO = BIT(6), 2676 WMI_10_2_PEER_STATS = BIT(7), 2677 }; 2678 2679 struct wmi_resource_config_10_2 { 2680 struct wmi_resource_config_10x common; 2681 __le32 max_peer_ext_stats; 2682 __le32 smart_ant_cap; /* 0-disable, 1-enable */ 2683 __le32 bk_min_free; 2684 __le32 be_min_free; 2685 __le32 vi_min_free; 2686 __le32 vo_min_free; 2687 __le32 feature_mask; 2688 } __packed; 2689 2690 #define NUM_UNITS_IS_NUM_VDEVS BIT(0) 2691 #define NUM_UNITS_IS_NUM_PEERS BIT(1) 2692 #define NUM_UNITS_IS_NUM_ACTIVE_PEERS BIT(2) 2693 2694 struct wmi_resource_config_10_4 { 2695 /* Number of virtual devices (VAPs) to support */ 2696 __le32 num_vdevs; 2697 2698 /* Number of peer nodes to support */ 2699 __le32 num_peers; 2700 2701 /* Number of active peer nodes to support */ 2702 __le32 num_active_peers; 2703 2704 /* In offload mode, target supports features like WOW, chatter and other 2705 * protocol offloads. In order to support them some functionalities like 2706 * reorder buffering, PN checking need to be done in target. 2707 * This determines maximum number of peers supported by target in 2708 * offload mode. 2709 */ 2710 __le32 num_offload_peers; 2711 2712 /* Number of reorder buffers available for doing target based reorder 2713 * Rx reorder buffering 2714 */ 2715 __le32 num_offload_reorder_buffs; 2716 2717 /* Number of keys per peer */ 2718 __le32 num_peer_keys; 2719 2720 /* Total number of TX/RX data TIDs */ 2721 __le32 num_tids; 2722 2723 /* Max skid for resolving hash collisions. 2724 * The address search table is sparse, so that if two MAC addresses 2725 * result in the same hash value, the second of these conflicting 2726 * entries can slide to the next index in the address search table, 2727 * and use it, if it is unoccupied. This ast_skid_limit parameter 2728 * specifies the upper bound on how many subsequent indices to search 2729 * over to find an unoccupied space. 2730 */ 2731 __le32 ast_skid_limit; 2732 2733 /* The nominal chain mask for transmit. 2734 * The chain mask may be modified dynamically, e.g. to operate AP tx 2735 * with a reduced number of chains if no clients are associated. 2736 * This configuration parameter specifies the nominal chain-mask that 2737 * should be used when not operating with a reduced set of tx chains. 2738 */ 2739 __le32 tx_chain_mask; 2740 2741 /* The nominal chain mask for receive. 2742 * The chain mask may be modified dynamically, e.g. for a client to use 2743 * a reduced number of chains for receive if the traffic to the client 2744 * is low enough that it doesn't require downlink MIMO or antenna 2745 * diversity. This configuration parameter specifies the nominal 2746 * chain-mask that should be used when not operating with a reduced 2747 * set of rx chains. 2748 */ 2749 __le32 rx_chain_mask; 2750 2751 /* What rx reorder timeout (ms) to use for the AC. 2752 * Each WMM access class (voice, video, best-effort, background) will 2753 * have its own timeout value to dictate how long to wait for missing 2754 * rx MPDUs to arrive before flushing subsequent MPDUs that have already 2755 * been received. This parameter specifies the timeout in milliseconds 2756 * for each class. 2757 */ 2758 __le32 rx_timeout_pri[4]; 2759 2760 /* What mode the rx should decap packets to. 2761 * MAC can decap to RAW (no decap), native wifi or Ethernet types. 2762 * This setting also determines the default TX behavior, however TX 2763 * behavior can be modified on a per VAP basis during VAP init 2764 */ 2765 __le32 rx_decap_mode; 2766 2767 __le32 scan_max_pending_req; 2768 2769 __le32 bmiss_offload_max_vdev; 2770 2771 __le32 roam_offload_max_vdev; 2772 2773 __le32 roam_offload_max_ap_profiles; 2774 2775 /* How many groups to use for mcast->ucast conversion. 2776 * The target's WAL maintains a table to hold information regarding 2777 * which peers belong to a given multicast group, so that if 2778 * multicast->unicast conversion is enabled, the target can convert 2779 * multicast tx frames to a series of unicast tx frames, to each peer 2780 * within the multicast group. This num_mcast_groups configuration 2781 * parameter tells the target how many multicast groups to provide 2782 * storage for within its multicast group membership table. 2783 */ 2784 __le32 num_mcast_groups; 2785 2786 /* Size to alloc for the mcast membership table. 2787 * This num_mcast_table_elems configuration parameter tells the target 2788 * how many peer elements it needs to provide storage for in its 2789 * multicast group membership table. These multicast group membership 2790 * table elements are shared by the multicast groups stored within 2791 * the table. 2792 */ 2793 __le32 num_mcast_table_elems; 2794 2795 /* Whether/how to do multicast->unicast conversion. 2796 * This configuration parameter specifies whether the target should 2797 * perform multicast --> unicast conversion on transmit, and if so, 2798 * what to do if it finds no entries in its multicast group membership 2799 * table for the multicast IP address in the tx frame. 2800 * Configuration value: 2801 * 0 -> Do not perform multicast to unicast conversion. 2802 * 1 -> Convert multicast frames to unicast, if the IP multicast address 2803 * from the tx frame is found in the multicast group membership 2804 * table. If the IP multicast address is not found, drop the frame 2805 * 2 -> Convert multicast frames to unicast, if the IP multicast address 2806 * from the tx frame is found in the multicast group membership 2807 * table. If the IP multicast address is not found, transmit the 2808 * frame as multicast. 2809 */ 2810 __le32 mcast2ucast_mode; 2811 2812 /* How much memory to allocate for a tx PPDU dbg log. 2813 * This parameter controls how much memory the target will allocate to 2814 * store a log of tx PPDU meta-information (how large the PPDU was, 2815 * when it was sent, whether it was successful, etc.) 2816 */ 2817 __le32 tx_dbg_log_size; 2818 2819 /* How many AST entries to be allocated for WDS */ 2820 __le32 num_wds_entries; 2821 2822 /* MAC DMA burst size. 0 -default, 1 -256B */ 2823 __le32 dma_burst_size; 2824 2825 /* Fixed delimiters to be inserted after every MPDU to account for 2826 * interface latency to avoid underrun. 2827 */ 2828 __le32 mac_aggr_delim; 2829 2830 /* Determine whether target is responsible for detecting duplicate 2831 * non-aggregate MPDU and timing out stale fragments. A-MPDU reordering 2832 * is always performed on the target. 2833 * 2834 * 0: target responsible for frag timeout and dup checking 2835 * 1: host responsible for frag timeout and dup checking 2836 */ 2837 __le32 rx_skip_defrag_timeout_dup_detection_check; 2838 2839 /* Configuration for VoW : No of Video nodes to be supported and max 2840 * no of descriptors for each video link (node). 2841 */ 2842 __le32 vow_config; 2843 2844 /* Maximum vdev that could use gtk offload */ 2845 __le32 gtk_offload_max_vdev; 2846 2847 /* Number of msdu descriptors target should use */ 2848 __le32 num_msdu_desc; 2849 2850 /* Max number of tx fragments per MSDU. 2851 * This parameter controls the max number of tx fragments per MSDU. 2852 * This will passed by target as part of the WMI_SERVICE_READY event 2853 * and is overridden by the OS shim as required. 2854 */ 2855 __le32 max_frag_entries; 2856 2857 /* Max number of extended peer stats. 2858 * This parameter controls the max number of peers for which extended 2859 * statistics are supported by target 2860 */ 2861 __le32 max_peer_ext_stats; 2862 2863 /* Smart antenna capabilities information. 2864 * 1 - Smart antenna is enabled 2865 * 0 - Smart antenna is disabled 2866 * In future this can contain smart antenna specific capabilities. 2867 */ 2868 __le32 smart_ant_cap; 2869 2870 /* User can configure the buffers allocated for each AC (BE, BK, VI, VO) 2871 * during init. 2872 */ 2873 __le32 bk_minfree; 2874 __le32 be_minfree; 2875 __le32 vi_minfree; 2876 __le32 vo_minfree; 2877 2878 /* Rx batch mode capability. 2879 * 1 - Rx batch mode enabled 2880 * 0 - Rx batch mode disabled 2881 */ 2882 __le32 rx_batchmode; 2883 2884 /* Thermal throttling capability. 2885 * 1 - Capable of thermal throttling 2886 * 0 - Not capable of thermal throttling 2887 */ 2888 __le32 tt_support; 2889 2890 /* ATF configuration. 2891 * 1 - Enable ATF 2892 * 0 - Disable ATF 2893 */ 2894 __le32 atf_config; 2895 2896 /* Configure padding to manage IP header un-alignment 2897 * 1 - Enable padding 2898 * 0 - Disable padding 2899 */ 2900 __le32 iphdr_pad_config; 2901 2902 /* qwrap configuration (bits 15-0) 2903 * 1 - This is qwrap configuration 2904 * 0 - This is not qwrap 2905 * 2906 * Bits 31-16 is alloc_frag_desc_for_data_pkt (1 enables, 0 disables) 2907 * In order to get ack-RSSI reporting and to specify the tx-rate for 2908 * individual frames, this option must be enabled. This uses an extra 2909 * 4 bytes per tx-msdu descriptor, so don't enable it unless you need it. 2910 */ 2911 __le32 qwrap_config; 2912 } __packed; 2913 2914 enum wmi_coex_version { 2915 WMI_NO_COEX_VERSION_SUPPORT = 0, 2916 /* 3 wire coex support*/ 2917 WMI_COEX_VERSION_1 = 1, 2918 /* 2.5 wire coex support*/ 2919 WMI_COEX_VERSION_2 = 2, 2920 /* 2.5 wire coex with duty cycle support */ 2921 WMI_COEX_VERSION_3 = 3, 2922 /* 4 wire coex support*/ 2923 WMI_COEX_VERSION_4 = 4, 2924 }; 2925 2926 /** 2927 * enum wmi_10_4_feature_mask - WMI 10.4 feature enable/disable flags 2928 * @WMI_10_4_LTEU_SUPPORT: LTEU config 2929 * @WMI_10_4_COEX_GPIO_SUPPORT: COEX GPIO config 2930 * @WMI_10_4_AUX_RADIO_SPECTRAL_INTF: AUX Radio Enhancement for spectral scan 2931 * @WMI_10_4_AUX_RADIO_CHAN_LOAD_INTF: AUX Radio Enhancement for chan load scan 2932 * @WMI_10_4_BSS_CHANNEL_INFO_64: BSS channel info stats 2933 * @WMI_10_4_PEER_STATS: Per station stats 2934 * @WMI_10_4_VDEV_STATS: Per vdev stats 2935 * @WMI_10_4_TDLS: Implicit TDLS support in firmware enable/disable 2936 * @WMI_10_4_TDLS_OFFCHAN: TDLS offchannel support enable/disable 2937 * @WMI_10_4_TDLS_UAPSD_BUFFER_STA: TDLS buffer sta support enable/disable 2938 * @WMI_10_4_TDLS_UAPSD_SLEEP_STA: TDLS sleep sta support enable/disable 2939 * @WMI_10_4_TDLS_CONN_TRACKER_IN_HOST_MODE: TDLS connection tracker in host 2940 * enable/disable 2941 * @WMI_10_4_TDLS_EXPLICIT_MODE_ONLY:Explicit TDLS mode enable/disable 2942 * @WMI_10_4_TX_DATA_ACK_RSSI: Enable DATA ACK RSSI if firmware is capable 2943 */ 2944 enum wmi_10_4_feature_mask { 2945 WMI_10_4_LTEU_SUPPORT = BIT(0), 2946 WMI_10_4_COEX_GPIO_SUPPORT = BIT(1), 2947 WMI_10_4_AUX_RADIO_SPECTRAL_INTF = BIT(2), 2948 WMI_10_4_AUX_RADIO_CHAN_LOAD_INTF = BIT(3), 2949 WMI_10_4_BSS_CHANNEL_INFO_64 = BIT(4), 2950 WMI_10_4_PEER_STATS = BIT(5), 2951 WMI_10_4_VDEV_STATS = BIT(6), 2952 WMI_10_4_TDLS = BIT(7), 2953 WMI_10_4_TDLS_OFFCHAN = BIT(8), 2954 WMI_10_4_TDLS_UAPSD_BUFFER_STA = BIT(9), 2955 WMI_10_4_TDLS_UAPSD_SLEEP_STA = BIT(10), 2956 WMI_10_4_TDLS_CONN_TRACKER_IN_HOST_MODE = BIT(11), 2957 WMI_10_4_TDLS_EXPLICIT_MODE_ONLY = BIT(12), 2958 WMI_10_4_TX_DATA_ACK_RSSI = BIT(16), 2959 2960 }; 2961 2962 struct wmi_ext_resource_config_10_4_cmd { 2963 /* contains enum wmi_host_platform_type */ 2964 __le32 host_platform_config; 2965 /* see enum wmi_10_4_feature_mask */ 2966 __le32 fw_feature_bitmap; 2967 /* WLAN priority GPIO number */ 2968 __le32 wlan_gpio_priority; 2969 /* see enum wmi_coex_version */ 2970 __le32 coex_version; 2971 /* COEX GPIO config */ 2972 __le32 coex_gpio_pin1; 2973 __le32 coex_gpio_pin2; 2974 __le32 coex_gpio_pin3; 2975 /* number of vdevs allowed to perform tdls */ 2976 __le32 num_tdls_vdevs; 2977 /* number of peers to track per TDLS vdev */ 2978 __le32 num_tdls_conn_table_entries; 2979 /* number of tdls sleep sta supported */ 2980 __le32 max_tdls_concurrent_sleep_sta; 2981 /* number of tdls buffer sta supported */ 2982 __le32 max_tdls_concurrent_buffer_sta; 2983 }; 2984 2985 /* structure describing host memory chunk. */ 2986 struct host_memory_chunk { 2987 /* id of the request that is passed up in service ready */ 2988 __le32 req_id; 2989 /* the physical address the memory chunk */ 2990 __le32 ptr; 2991 /* size of the chunk */ 2992 __le32 size; 2993 } __packed; 2994 2995 struct wmi_host_mem_chunks { 2996 __le32 count; 2997 /* some fw revisions require at least 1 chunk regardless of count */ 2998 struct host_memory_chunk items[1]; 2999 } __packed; 3000 3001 struct wmi_init_cmd { 3002 struct wmi_resource_config resource_config; 3003 struct wmi_host_mem_chunks mem_chunks; 3004 } __packed; 3005 3006 /* _10x structure is from 10.X FW API */ 3007 struct wmi_init_cmd_10x { 3008 struct wmi_resource_config_10x resource_config; 3009 struct wmi_host_mem_chunks mem_chunks; 3010 } __packed; 3011 3012 struct wmi_init_cmd_10_2 { 3013 struct wmi_resource_config_10_2 resource_config; 3014 struct wmi_host_mem_chunks mem_chunks; 3015 } __packed; 3016 3017 struct wmi_init_cmd_10_4 { 3018 struct wmi_resource_config_10_4 resource_config; 3019 struct wmi_host_mem_chunks mem_chunks; 3020 } __packed; 3021 3022 struct wmi_chan_list_entry { 3023 __le16 freq; 3024 u8 phy_mode; /* valid for 10.2 only */ 3025 u8 reserved; 3026 } __packed; 3027 3028 /* TLV for channel list */ 3029 struct wmi_chan_list { 3030 __le32 tag; /* WMI_CHAN_LIST_TAG */ 3031 __le32 num_chan; 3032 struct wmi_chan_list_entry channel_list[0]; 3033 } __packed; 3034 3035 struct wmi_bssid_list { 3036 __le32 tag; /* WMI_BSSID_LIST_TAG */ 3037 __le32 num_bssid; 3038 struct wmi_mac_addr bssid_list[0]; 3039 } __packed; 3040 3041 struct wmi_ie_data { 3042 __le32 tag; /* WMI_IE_TAG */ 3043 __le32 ie_len; 3044 u8 ie_data[0]; 3045 } __packed; 3046 3047 struct wmi_ssid { 3048 __le32 ssid_len; 3049 u8 ssid[32]; 3050 } __packed; 3051 3052 struct wmi_ssid_list { 3053 __le32 tag; /* WMI_SSID_LIST_TAG */ 3054 __le32 num_ssids; 3055 struct wmi_ssid ssids[0]; 3056 } __packed; 3057 3058 /* prefix used by scan requestor ids on the host */ 3059 #define WMI_HOST_SCAN_REQUESTOR_ID_PREFIX 0xA000 3060 3061 /* prefix used by scan request ids generated on the host */ 3062 /* host cycles through the lower 12 bits to generate ids */ 3063 #define WMI_HOST_SCAN_REQ_ID_PREFIX 0xA000 3064 3065 #define WLAN_SCAN_PARAMS_MAX_SSID 16 3066 #define WLAN_SCAN_PARAMS_MAX_BSSID 4 3067 #define WLAN_SCAN_PARAMS_MAX_IE_LEN 256 3068 3069 /* Values lower than this may be refused by some firmware revisions with a scan 3070 * completion with a timedout reason. 3071 */ 3072 #define WMI_SCAN_CHAN_MIN_TIME_MSEC 40 3073 3074 /* Scan priority numbers must be sequential, starting with 0 */ 3075 enum wmi_scan_priority { 3076 WMI_SCAN_PRIORITY_VERY_LOW = 0, 3077 WMI_SCAN_PRIORITY_LOW, 3078 WMI_SCAN_PRIORITY_MEDIUM, 3079 WMI_SCAN_PRIORITY_HIGH, 3080 WMI_SCAN_PRIORITY_VERY_HIGH, 3081 WMI_SCAN_PRIORITY_COUNT /* number of priorities supported */ 3082 }; 3083 3084 struct wmi_start_scan_common { 3085 /* Scan ID */ 3086 __le32 scan_id; 3087 /* Scan requestor ID */ 3088 __le32 scan_req_id; 3089 /* VDEV id(interface) that is requesting scan */ 3090 __le32 vdev_id; 3091 /* Scan Priority, input to scan scheduler */ 3092 __le32 scan_priority; 3093 /* Scan events subscription */ 3094 __le32 notify_scan_events; 3095 /* dwell time in msec on active channels */ 3096 __le32 dwell_time_active; 3097 /* dwell time in msec on passive channels */ 3098 __le32 dwell_time_passive; 3099 /* 3100 * min time in msec on the BSS channel,only valid if atleast one 3101 * VDEV is active 3102 */ 3103 __le32 min_rest_time; 3104 /* 3105 * max rest time in msec on the BSS channel,only valid if at least 3106 * one VDEV is active 3107 */ 3108 /* 3109 * the scanner will rest on the bss channel at least min_rest_time 3110 * after min_rest_time the scanner will start checking for tx/rx 3111 * activity on all VDEVs. if there is no activity the scanner will 3112 * switch to off channel. if there is activity the scanner will let 3113 * the radio on the bss channel until max_rest_time expires.at 3114 * max_rest_time scanner will switch to off channel irrespective of 3115 * activity. activity is determined by the idle_time parameter. 3116 */ 3117 __le32 max_rest_time; 3118 /* 3119 * time before sending next set of probe requests. 3120 * The scanner keeps repeating probe requests transmission with 3121 * period specified by repeat_probe_time. 3122 * The number of probe requests specified depends on the ssid_list 3123 * and bssid_list 3124 */ 3125 __le32 repeat_probe_time; 3126 /* time in msec between 2 consequetive probe requests with in a set. */ 3127 __le32 probe_spacing_time; 3128 /* 3129 * data inactivity time in msec on bss channel that will be used by 3130 * scanner for measuring the inactivity. 3131 */ 3132 __le32 idle_time; 3133 /* maximum time in msec allowed for scan */ 3134 __le32 max_scan_time; 3135 /* 3136 * delay in msec before sending first probe request after switching 3137 * to a channel 3138 */ 3139 __le32 probe_delay; 3140 /* Scan control flags */ 3141 __le32 scan_ctrl_flags; 3142 } __packed; 3143 3144 struct wmi_start_scan_tlvs { 3145 /* TLV parameters. These includes channel list, ssid list, bssid list, 3146 * extra ies. 3147 */ 3148 u8 tlvs[0]; 3149 } __packed; 3150 3151 struct wmi_start_scan_cmd { 3152 struct wmi_start_scan_common common; 3153 __le32 burst_duration_ms; 3154 struct wmi_start_scan_tlvs tlvs; 3155 } __packed; 3156 3157 /* This is the definition from 10.X firmware branch */ 3158 struct wmi_10x_start_scan_cmd { 3159 struct wmi_start_scan_common common; 3160 struct wmi_start_scan_tlvs tlvs; 3161 } __packed; 3162 3163 struct wmi_ssid_arg { 3164 int len; 3165 const u8 *ssid; 3166 }; 3167 3168 struct wmi_bssid_arg { 3169 const u8 *bssid; 3170 }; 3171 3172 struct wmi_start_scan_arg { 3173 u32 scan_id; 3174 u32 scan_req_id; 3175 u32 vdev_id; 3176 u32 scan_priority; 3177 u32 notify_scan_events; 3178 u32 dwell_time_active; 3179 u32 dwell_time_passive; 3180 u32 min_rest_time; 3181 u32 max_rest_time; 3182 u32 repeat_probe_time; 3183 u32 probe_spacing_time; 3184 u32 idle_time; 3185 u32 max_scan_time; 3186 u32 probe_delay; 3187 u32 scan_ctrl_flags; 3188 u32 burst_duration_ms; 3189 3190 u32 ie_len; 3191 u32 n_channels; 3192 u32 n_ssids; 3193 u32 n_bssids; 3194 3195 u8 ie[WLAN_SCAN_PARAMS_MAX_IE_LEN]; 3196 u16 channels[64]; 3197 struct wmi_ssid_arg ssids[WLAN_SCAN_PARAMS_MAX_SSID]; 3198 struct wmi_bssid_arg bssids[WLAN_SCAN_PARAMS_MAX_BSSID]; 3199 struct wmi_mac_addr mac_addr; 3200 struct wmi_mac_addr mac_mask; 3201 }; 3202 3203 /* scan control flags */ 3204 3205 /* passively scan all channels including active channels */ 3206 #define WMI_SCAN_FLAG_PASSIVE 0x1 3207 /* add wild card ssid probe request even though ssid_list is specified. */ 3208 #define WMI_SCAN_ADD_BCAST_PROBE_REQ 0x2 3209 /* add cck rates to rates/xrate ie for the generated probe request */ 3210 #define WMI_SCAN_ADD_CCK_RATES 0x4 3211 /* add ofdm rates to rates/xrate ie for the generated probe request */ 3212 #define WMI_SCAN_ADD_OFDM_RATES 0x8 3213 /* To enable indication of Chan load and Noise floor to host */ 3214 #define WMI_SCAN_CHAN_STAT_EVENT 0x10 3215 /* Filter Probe request frames */ 3216 #define WMI_SCAN_FILTER_PROBE_REQ 0x20 3217 /* When set, DFS channels will not be scanned */ 3218 #define WMI_SCAN_BYPASS_DFS_CHN 0x40 3219 /* Different FW scan engine may choose to bail out on errors. 3220 * Allow the driver to have influence over that. 3221 */ 3222 #define WMI_SCAN_CONTINUE_ON_ERROR 0x80 3223 3224 /* Use random MAC address for TA for Probe Request frame and add 3225 * OUI specified by WMI_SCAN_PROB_REQ_OUI_CMDID to the Probe Request frame. 3226 * if OUI is not set by WMI_SCAN_PROB_REQ_OUI_CMDID then the flag is ignored. 3227 */ 3228 #define WMI_SCAN_ADD_SPOOFED_MAC_IN_PROBE_REQ 0x1000 3229 3230 /* WMI_SCAN_CLASS_MASK must be the same value as IEEE80211_SCAN_CLASS_MASK */ 3231 #define WMI_SCAN_CLASS_MASK 0xFF000000 3232 3233 enum wmi_stop_scan_type { 3234 WMI_SCAN_STOP_ONE = 0x00000000, /* stop by scan_id */ 3235 WMI_SCAN_STOP_VDEV_ALL = 0x01000000, /* stop by vdev_id */ 3236 WMI_SCAN_STOP_ALL = 0x04000000, /* stop all scans */ 3237 }; 3238 3239 struct wmi_stop_scan_cmd { 3240 __le32 scan_req_id; 3241 __le32 scan_id; 3242 __le32 req_type; 3243 __le32 vdev_id; 3244 } __packed; 3245 3246 struct wmi_stop_scan_arg { 3247 u32 req_id; 3248 enum wmi_stop_scan_type req_type; 3249 union { 3250 u32 scan_id; 3251 u32 vdev_id; 3252 } u; 3253 }; 3254 3255 struct wmi_scan_chan_list_cmd { 3256 __le32 num_scan_chans; 3257 struct wmi_channel chan_info[0]; 3258 } __packed; 3259 3260 struct wmi_scan_chan_list_arg { 3261 u32 n_channels; 3262 struct wmi_channel_arg *channels; 3263 }; 3264 3265 enum wmi_bss_filter { 3266 WMI_BSS_FILTER_NONE = 0, /* no beacons forwarded */ 3267 WMI_BSS_FILTER_ALL, /* all beacons forwarded */ 3268 WMI_BSS_FILTER_PROFILE, /* only beacons matching profile */ 3269 WMI_BSS_FILTER_ALL_BUT_PROFILE, /* all but beacons matching profile */ 3270 WMI_BSS_FILTER_CURRENT_BSS, /* only beacons matching current BSS */ 3271 WMI_BSS_FILTER_ALL_BUT_BSS, /* all but beacons matching BSS */ 3272 WMI_BSS_FILTER_PROBED_SSID, /* beacons matching probed ssid */ 3273 WMI_BSS_FILTER_LAST_BSS, /* marker only */ 3274 }; 3275 3276 enum wmi_scan_event_type { 3277 WMI_SCAN_EVENT_STARTED = BIT(0), 3278 WMI_SCAN_EVENT_COMPLETED = BIT(1), 3279 WMI_SCAN_EVENT_BSS_CHANNEL = BIT(2), 3280 WMI_SCAN_EVENT_FOREIGN_CHANNEL = BIT(3), 3281 WMI_SCAN_EVENT_DEQUEUED = BIT(4), 3282 /* possibly by high-prio scan */ 3283 WMI_SCAN_EVENT_PREEMPTED = BIT(5), 3284 WMI_SCAN_EVENT_START_FAILED = BIT(6), 3285 WMI_SCAN_EVENT_RESTARTED = BIT(7), 3286 WMI_SCAN_EVENT_FOREIGN_CHANNEL_EXIT = BIT(8), 3287 WMI_SCAN_EVENT_MAX = BIT(15), 3288 }; 3289 3290 enum wmi_scan_completion_reason { 3291 WMI_SCAN_REASON_COMPLETED, 3292 WMI_SCAN_REASON_CANCELLED, 3293 WMI_SCAN_REASON_PREEMPTED, 3294 WMI_SCAN_REASON_TIMEDOUT, 3295 WMI_SCAN_REASON_INTERNAL_FAILURE, 3296 WMI_SCAN_REASON_MAX, 3297 }; 3298 3299 struct wmi_scan_event { 3300 __le32 event_type; /* %WMI_SCAN_EVENT_ */ 3301 __le32 reason; /* %WMI_SCAN_REASON_ */ 3302 __le32 channel_freq; /* only valid for WMI_SCAN_EVENT_FOREIGN_CHANNEL */ 3303 __le32 scan_req_id; 3304 __le32 scan_id; 3305 __le32 vdev_id; 3306 } __packed; 3307 3308 /* 3309 * This defines how much headroom is kept in the 3310 * receive frame between the descriptor and the 3311 * payload, in order for the WMI PHY error and 3312 * management handler to insert header contents. 3313 * 3314 * This is in bytes. 3315 */ 3316 #define WMI_MGMT_RX_HDR_HEADROOM 52 3317 3318 /* 3319 * This event will be used for sending scan results 3320 * as well as rx mgmt frames to the host. The rx buffer 3321 * will be sent as part of this WMI event. It would be a 3322 * good idea to pass all the fields in the RX status 3323 * descriptor up to the host. 3324 */ 3325 struct wmi_mgmt_rx_hdr_v1 { 3326 __le32 channel; 3327 __le32 snr; 3328 __le32 rate; 3329 __le32 phy_mode; 3330 __le32 buf_len; 3331 __le32 status; /* %WMI_RX_STATUS_ */ 3332 } __packed; 3333 3334 struct wmi_mgmt_rx_hdr_v2 { 3335 struct wmi_mgmt_rx_hdr_v1 v1; 3336 __le32 rssi_ctl[4]; 3337 } __packed; 3338 3339 struct wmi_mgmt_rx_event_v1 { 3340 struct wmi_mgmt_rx_hdr_v1 hdr; 3341 u8 buf[0]; 3342 } __packed; 3343 3344 struct wmi_mgmt_rx_event_v2 { 3345 struct wmi_mgmt_rx_hdr_v2 hdr; 3346 u8 buf[0]; 3347 } __packed; 3348 3349 struct wmi_10_4_mgmt_rx_hdr { 3350 __le32 channel; 3351 __le32 snr; 3352 u8 rssi_ctl[4]; 3353 __le32 rate; 3354 __le32 phy_mode; 3355 __le32 buf_len; 3356 __le32 status; 3357 } __packed; 3358 3359 struct wmi_10_4_mgmt_rx_event { 3360 struct wmi_10_4_mgmt_rx_hdr hdr; 3361 u8 buf[0]; 3362 } __packed; 3363 3364 struct wmi_mgmt_rx_ext_info { 3365 __le64 rx_mac_timestamp; 3366 } __packed __aligned(4); 3367 3368 #define WMI_RX_STATUS_OK 0x00 3369 #define WMI_RX_STATUS_ERR_CRC 0x01 3370 #define WMI_RX_STATUS_ERR_DECRYPT 0x08 3371 #define WMI_RX_STATUS_ERR_MIC 0x10 3372 #define WMI_RX_STATUS_ERR_KEY_CACHE_MISS 0x20 3373 /* Extension data at the end of mgmt frame */ 3374 #define WMI_RX_STATUS_EXT_INFO 0x40 3375 3376 #define PHY_ERROR_GEN_SPECTRAL_SCAN 0x26 3377 #define PHY_ERROR_GEN_FALSE_RADAR_EXT 0x24 3378 #define PHY_ERROR_GEN_RADAR 0x05 3379 3380 #define PHY_ERROR_10_4_RADAR_MASK 0x4 3381 #define PHY_ERROR_10_4_SPECTRAL_SCAN_MASK 0x4000000 3382 3383 enum phy_err_type { 3384 PHY_ERROR_UNKNOWN, 3385 PHY_ERROR_SPECTRAL_SCAN, 3386 PHY_ERROR_FALSE_RADAR_EXT, 3387 PHY_ERROR_RADAR 3388 }; 3389 3390 struct wmi_phyerr { 3391 __le32 tsf_timestamp; 3392 __le16 freq1; 3393 __le16 freq2; 3394 u8 rssi_combined; 3395 u8 chan_width_mhz; 3396 u8 phy_err_code; 3397 u8 rsvd0; 3398 __le32 rssi_chains[4]; 3399 __le16 nf_chains[4]; 3400 __le32 buf_len; 3401 u8 buf[0]; 3402 } __packed; 3403 3404 struct wmi_phyerr_event { 3405 __le32 num_phyerrs; 3406 __le32 tsf_l32; 3407 __le32 tsf_u32; 3408 struct wmi_phyerr phyerrs[0]; 3409 } __packed; 3410 3411 struct wmi_10_4_phyerr_event { 3412 __le32 tsf_l32; 3413 __le32 tsf_u32; 3414 __le16 freq1; 3415 __le16 freq2; 3416 u8 rssi_combined; 3417 u8 chan_width_mhz; 3418 u8 phy_err_code; 3419 u8 rsvd0; 3420 __le32 rssi_chains[4]; 3421 __le16 nf_chains[4]; 3422 __le32 phy_err_mask[2]; 3423 __le32 tsf_timestamp; 3424 __le32 buf_len; 3425 u8 buf[0]; 3426 } __packed; 3427 3428 struct wmi_radar_found_info { 3429 __le32 pri_min; 3430 __le32 pri_max; 3431 __le32 width_min; 3432 __le32 width_max; 3433 __le32 sidx_min; 3434 __le32 sidx_max; 3435 } __packed; 3436 3437 enum wmi_radar_confirmation_status { 3438 /* Detected radar was due to SW pulses */ 3439 WMI_SW_RADAR_DETECTED = 0, 3440 3441 WMI_RADAR_DETECTION_FAIL = 1, 3442 3443 /* Real radar detected */ 3444 WMI_HW_RADAR_DETECTED = 2, 3445 }; 3446 3447 #define PHYERR_TLV_SIG 0xBB 3448 #define PHYERR_TLV_TAG_SEARCH_FFT_REPORT 0xFB 3449 #define PHYERR_TLV_TAG_RADAR_PULSE_SUMMARY 0xF8 3450 #define PHYERR_TLV_TAG_SPECTRAL_SUMMARY_REPORT 0xF9 3451 3452 struct phyerr_radar_report { 3453 __le32 reg0; /* RADAR_REPORT_REG0_* */ 3454 __le32 reg1; /* RADAR_REPORT_REG1_* */ 3455 } __packed; 3456 3457 #define RADAR_REPORT_REG0_PULSE_IS_CHIRP_MASK 0x80000000 3458 #define RADAR_REPORT_REG0_PULSE_IS_CHIRP_LSB 31 3459 3460 #define RADAR_REPORT_REG0_PULSE_IS_MAX_WIDTH_MASK 0x40000000 3461 #define RADAR_REPORT_REG0_PULSE_IS_MAX_WIDTH_LSB 30 3462 3463 #define RADAR_REPORT_REG0_AGC_TOTAL_GAIN_MASK 0x3FF00000 3464 #define RADAR_REPORT_REG0_AGC_TOTAL_GAIN_LSB 20 3465 3466 #define RADAR_REPORT_REG0_PULSE_DELTA_DIFF_MASK 0x000F0000 3467 #define RADAR_REPORT_REG0_PULSE_DELTA_DIFF_LSB 16 3468 3469 #define RADAR_REPORT_REG0_PULSE_DELTA_PEAK_MASK 0x0000FC00 3470 #define RADAR_REPORT_REG0_PULSE_DELTA_PEAK_LSB 10 3471 3472 #define RADAR_REPORT_REG0_PULSE_SIDX_MASK 0x000003FF 3473 #define RADAR_REPORT_REG0_PULSE_SIDX_LSB 0 3474 3475 #define RADAR_REPORT_REG1_PULSE_SRCH_FFT_VALID_MASK 0x80000000 3476 #define RADAR_REPORT_REG1_PULSE_SRCH_FFT_VALID_LSB 31 3477 3478 #define RADAR_REPORT_REG1_PULSE_AGC_MB_GAIN_MASK 0x7F000000 3479 #define RADAR_REPORT_REG1_PULSE_AGC_MB_GAIN_LSB 24 3480 3481 #define RADAR_REPORT_REG1_PULSE_SUBCHAN_MASK_MASK 0x00FF0000 3482 #define RADAR_REPORT_REG1_PULSE_SUBCHAN_MASK_LSB 16 3483 3484 #define RADAR_REPORT_REG1_PULSE_TSF_OFFSET_MASK 0x0000FF00 3485 #define RADAR_REPORT_REG1_PULSE_TSF_OFFSET_LSB 8 3486 3487 #define RADAR_REPORT_REG1_PULSE_DUR_MASK 0x000000FF 3488 #define RADAR_REPORT_REG1_PULSE_DUR_LSB 0 3489 3490 struct phyerr_fft_report { 3491 __le32 reg0; /* SEARCH_FFT_REPORT_REG0_ * */ 3492 __le32 reg1; /* SEARCH_FFT_REPORT_REG1_ * */ 3493 } __packed; 3494 3495 #define SEARCH_FFT_REPORT_REG0_TOTAL_GAIN_DB_MASK 0xFF800000 3496 #define SEARCH_FFT_REPORT_REG0_TOTAL_GAIN_DB_LSB 23 3497 3498 #define SEARCH_FFT_REPORT_REG0_BASE_PWR_DB_MASK 0x007FC000 3499 #define SEARCH_FFT_REPORT_REG0_BASE_PWR_DB_LSB 14 3500 3501 #define SEARCH_FFT_REPORT_REG0_FFT_CHN_IDX_MASK 0x00003000 3502 #define SEARCH_FFT_REPORT_REG0_FFT_CHN_IDX_LSB 12 3503 3504 #define SEARCH_FFT_REPORT_REG0_PEAK_SIDX_MASK 0x00000FFF 3505 #define SEARCH_FFT_REPORT_REG0_PEAK_SIDX_LSB 0 3506 3507 #define SEARCH_FFT_REPORT_REG1_RELPWR_DB_MASK 0xFC000000 3508 #define SEARCH_FFT_REPORT_REG1_RELPWR_DB_LSB 26 3509 3510 #define SEARCH_FFT_REPORT_REG1_AVGPWR_DB_MASK 0x03FC0000 3511 #define SEARCH_FFT_REPORT_REG1_AVGPWR_DB_LSB 18 3512 3513 #define SEARCH_FFT_REPORT_REG1_PEAK_MAG_MASK 0x0003FF00 3514 #define SEARCH_FFT_REPORT_REG1_PEAK_MAG_LSB 8 3515 3516 #define SEARCH_FFT_REPORT_REG1_NUM_STR_BINS_IB_MASK 0x000000FF 3517 #define SEARCH_FFT_REPORT_REG1_NUM_STR_BINS_IB_LSB 0 3518 3519 struct phyerr_tlv { 3520 __le16 len; 3521 u8 tag; 3522 u8 sig; 3523 } __packed; 3524 3525 #define DFS_RSSI_POSSIBLY_FALSE 50 3526 #define DFS_PEAK_MAG_THOLD_POSSIBLY_FALSE 40 3527 3528 struct wmi_mgmt_tx_hdr { 3529 __le32 vdev_id; 3530 struct wmi_mac_addr peer_macaddr; 3531 __le32 tx_rate; 3532 __le32 tx_power; 3533 __le32 buf_len; 3534 } __packed; 3535 3536 struct wmi_mgmt_tx_cmd { 3537 struct wmi_mgmt_tx_hdr hdr; 3538 u8 buf[0]; 3539 } __packed; 3540 3541 struct wmi_echo_event { 3542 __le32 value; 3543 } __packed; 3544 3545 struct wmi_echo_cmd { 3546 __le32 value; 3547 } __packed; 3548 3549 struct wmi_pdev_set_regdomain_cmd { 3550 __le32 reg_domain; 3551 __le32 reg_domain_2G; 3552 __le32 reg_domain_5G; 3553 __le32 conformance_test_limit_2G; 3554 __le32 conformance_test_limit_5G; 3555 } __packed; 3556 3557 enum wmi_dfs_region { 3558 /* Uninitialized dfs domain */ 3559 WMI_UNINIT_DFS_DOMAIN = 0, 3560 3561 /* FCC3 dfs domain */ 3562 WMI_FCC_DFS_DOMAIN = 1, 3563 3564 /* ETSI dfs domain */ 3565 WMI_ETSI_DFS_DOMAIN = 2, 3566 3567 /*Japan dfs domain */ 3568 WMI_MKK4_DFS_DOMAIN = 3, 3569 }; 3570 3571 struct wmi_pdev_set_regdomain_cmd_10x { 3572 __le32 reg_domain; 3573 __le32 reg_domain_2G; 3574 __le32 reg_domain_5G; 3575 __le32 conformance_test_limit_2G; 3576 __le32 conformance_test_limit_5G; 3577 3578 /* dfs domain from wmi_dfs_region */ 3579 __le32 dfs_domain; 3580 } __packed; 3581 3582 /* Command to set/unset chip in quiet mode */ 3583 struct wmi_pdev_set_quiet_cmd { 3584 /* period in TUs */ 3585 __le32 period; 3586 3587 /* duration in TUs */ 3588 __le32 duration; 3589 3590 /* offset in TUs */ 3591 __le32 next_start; 3592 3593 /* enable/disable */ 3594 __le32 enabled; 3595 } __packed; 3596 3597 /* 3598 * 802.11g protection mode. 3599 */ 3600 enum ath10k_protmode { 3601 ATH10K_PROT_NONE = 0, /* no protection */ 3602 ATH10K_PROT_CTSONLY = 1, /* CTS to self */ 3603 ATH10K_PROT_RTSCTS = 2, /* RTS-CTS */ 3604 }; 3605 3606 enum wmi_rtscts_profile { 3607 WMI_RTSCTS_FOR_NO_RATESERIES = 0, 3608 WMI_RTSCTS_FOR_SECOND_RATESERIES, 3609 WMI_RTSCTS_ACROSS_SW_RETRIES 3610 }; 3611 3612 #define WMI_RTSCTS_ENABLED 1 3613 #define WMI_RTSCTS_SET_MASK 0x0f 3614 #define WMI_RTSCTS_SET_LSB 0 3615 3616 #define WMI_RTSCTS_PROFILE_MASK 0xf0 3617 #define WMI_RTSCTS_PROFILE_LSB 4 3618 3619 enum wmi_beacon_gen_mode { 3620 WMI_BEACON_STAGGERED_MODE = 0, 3621 WMI_BEACON_BURST_MODE = 1 3622 }; 3623 3624 enum wmi_csa_event_ies_present_flag { 3625 WMI_CSA_IE_PRESENT = 0x00000001, 3626 WMI_XCSA_IE_PRESENT = 0x00000002, 3627 WMI_WBW_IE_PRESENT = 0x00000004, 3628 WMI_CSWARP_IE_PRESENT = 0x00000008, 3629 }; 3630 3631 /* wmi CSA receive event from beacon frame */ 3632 struct wmi_csa_event { 3633 __le32 i_fc_dur; 3634 /* Bit 0-15: FC */ 3635 /* Bit 16-31: DUR */ 3636 struct wmi_mac_addr i_addr1; 3637 struct wmi_mac_addr i_addr2; 3638 __le32 csa_ie[2]; 3639 __le32 xcsa_ie[2]; 3640 __le32 wb_ie[2]; 3641 __le32 cswarp_ie; 3642 __le32 ies_present_flag; /* wmi_csa_event_ies_present_flag */ 3643 } __packed; 3644 3645 /* the definition of different PDEV parameters */ 3646 #define PDEV_DEFAULT_STATS_UPDATE_PERIOD 500 3647 #define VDEV_DEFAULT_STATS_UPDATE_PERIOD 500 3648 #define PEER_DEFAULT_STATS_UPDATE_PERIOD 500 3649 3650 struct wmi_pdev_param_map { 3651 u32 tx_chain_mask; 3652 u32 rx_chain_mask; 3653 u32 txpower_limit2g; 3654 u32 txpower_limit5g; 3655 u32 txpower_scale; 3656 u32 beacon_gen_mode; 3657 u32 beacon_tx_mode; 3658 u32 resmgr_offchan_mode; 3659 u32 protection_mode; 3660 u32 dynamic_bw; 3661 u32 non_agg_sw_retry_th; 3662 u32 agg_sw_retry_th; 3663 u32 sta_kickout_th; 3664 u32 ac_aggrsize_scaling; 3665 u32 ltr_enable; 3666 u32 ltr_ac_latency_be; 3667 u32 ltr_ac_latency_bk; 3668 u32 ltr_ac_latency_vi; 3669 u32 ltr_ac_latency_vo; 3670 u32 ltr_ac_latency_timeout; 3671 u32 ltr_sleep_override; 3672 u32 ltr_rx_override; 3673 u32 ltr_tx_activity_timeout; 3674 u32 l1ss_enable; 3675 u32 dsleep_enable; 3676 u32 pcielp_txbuf_flush; 3677 u32 pcielp_txbuf_watermark; 3678 u32 pcielp_txbuf_tmo_en; 3679 u32 pcielp_txbuf_tmo_value; 3680 u32 pdev_stats_update_period; 3681 u32 vdev_stats_update_period; 3682 u32 peer_stats_update_period; 3683 u32 bcnflt_stats_update_period; 3684 u32 pmf_qos; 3685 u32 arp_ac_override; 3686 u32 dcs; 3687 u32 ani_enable; 3688 u32 ani_poll_period; 3689 u32 ani_listen_period; 3690 u32 ani_ofdm_level; 3691 u32 ani_cck_level; 3692 u32 dyntxchain; 3693 u32 proxy_sta; 3694 u32 idle_ps_config; 3695 u32 power_gating_sleep; 3696 u32 fast_channel_reset; 3697 u32 burst_dur; 3698 u32 burst_enable; 3699 u32 cal_period; 3700 u32 aggr_burst; 3701 u32 rx_decap_mode; 3702 u32 smart_antenna_default_antenna; 3703 u32 igmpmld_override; 3704 u32 igmpmld_tid; 3705 u32 antenna_gain; 3706 u32 rx_filter; 3707 u32 set_mcast_to_ucast_tid; 3708 u32 proxy_sta_mode; 3709 u32 set_mcast2ucast_mode; 3710 u32 set_mcast2ucast_buffer; 3711 u32 remove_mcast2ucast_buffer; 3712 u32 peer_sta_ps_statechg_enable; 3713 u32 igmpmld_ac_override; 3714 u32 block_interbss; 3715 u32 set_disable_reset_cmdid; 3716 u32 set_msdu_ttl_cmdid; 3717 u32 set_ppdu_duration_cmdid; 3718 u32 txbf_sound_period_cmdid; 3719 u32 set_promisc_mode_cmdid; 3720 u32 set_burst_mode_cmdid; 3721 u32 en_stats; 3722 u32 mu_group_policy; 3723 u32 noise_detection; 3724 u32 noise_threshold; 3725 u32 dpd_enable; 3726 u32 set_mcast_bcast_echo; 3727 u32 atf_strict_sch; 3728 u32 atf_sched_duration; 3729 u32 ant_plzn; 3730 u32 mgmt_retry_limit; 3731 u32 sensitivity_level; 3732 u32 signed_txpower_2g; 3733 u32 signed_txpower_5g; 3734 u32 enable_per_tid_amsdu; 3735 u32 enable_per_tid_ampdu; 3736 u32 cca_threshold; 3737 u32 rts_fixed_rate; 3738 u32 pdev_reset; 3739 u32 wapi_mbssid_offset; 3740 u32 arp_srcaddr; 3741 u32 arp_dstaddr; 3742 u32 enable_btcoex; 3743 }; 3744 3745 #define WMI_PDEV_PARAM_UNSUPPORTED 0 3746 3747 enum wmi_pdev_param { 3748 /* TX chain mask */ 3749 WMI_PDEV_PARAM_TX_CHAIN_MASK = 0x1, 3750 /* RX chain mask */ 3751 WMI_PDEV_PARAM_RX_CHAIN_MASK, 3752 /* TX power limit for 2G Radio */ 3753 WMI_PDEV_PARAM_TXPOWER_LIMIT2G, 3754 /* TX power limit for 5G Radio */ 3755 WMI_PDEV_PARAM_TXPOWER_LIMIT5G, 3756 /* TX power scale */ 3757 WMI_PDEV_PARAM_TXPOWER_SCALE, 3758 /* Beacon generation mode . 0: host, 1: target */ 3759 WMI_PDEV_PARAM_BEACON_GEN_MODE, 3760 /* Beacon generation mode . 0: staggered 1: bursted */ 3761 WMI_PDEV_PARAM_BEACON_TX_MODE, 3762 /* 3763 * Resource manager off chan mode . 3764 * 0: turn off off chan mode. 1: turn on offchan mode 3765 */ 3766 WMI_PDEV_PARAM_RESMGR_OFFCHAN_MODE, 3767 /* 3768 * Protection mode: 3769 * 0: no protection 1:use CTS-to-self 2: use RTS/CTS 3770 */ 3771 WMI_PDEV_PARAM_PROTECTION_MODE, 3772 /* 3773 * Dynamic bandwidth - 0: disable, 1: enable 3774 * 3775 * When enabled HW rate control tries different bandwidths when 3776 * retransmitting frames. 3777 */ 3778 WMI_PDEV_PARAM_DYNAMIC_BW, 3779 /* Non aggregrate/ 11g sw retry threshold.0-disable */ 3780 WMI_PDEV_PARAM_NON_AGG_SW_RETRY_TH, 3781 /* aggregrate sw retry threshold. 0-disable*/ 3782 WMI_PDEV_PARAM_AGG_SW_RETRY_TH, 3783 /* Station kickout threshold (non of consecutive failures).0-disable */ 3784 WMI_PDEV_PARAM_STA_KICKOUT_TH, 3785 /* Aggerate size scaling configuration per AC */ 3786 WMI_PDEV_PARAM_AC_AGGRSIZE_SCALING, 3787 /* LTR enable */ 3788 WMI_PDEV_PARAM_LTR_ENABLE, 3789 /* LTR latency for BE, in us */ 3790 WMI_PDEV_PARAM_LTR_AC_LATENCY_BE, 3791 /* LTR latency for BK, in us */ 3792 WMI_PDEV_PARAM_LTR_AC_LATENCY_BK, 3793 /* LTR latency for VI, in us */ 3794 WMI_PDEV_PARAM_LTR_AC_LATENCY_VI, 3795 /* LTR latency for VO, in us */ 3796 WMI_PDEV_PARAM_LTR_AC_LATENCY_VO, 3797 /* LTR AC latency timeout, in ms */ 3798 WMI_PDEV_PARAM_LTR_AC_LATENCY_TIMEOUT, 3799 /* LTR platform latency override, in us */ 3800 WMI_PDEV_PARAM_LTR_SLEEP_OVERRIDE, 3801 /* LTR-RX override, in us */ 3802 WMI_PDEV_PARAM_LTR_RX_OVERRIDE, 3803 /* Tx activity timeout for LTR, in us */ 3804 WMI_PDEV_PARAM_LTR_TX_ACTIVITY_TIMEOUT, 3805 /* L1SS state machine enable */ 3806 WMI_PDEV_PARAM_L1SS_ENABLE, 3807 /* Deep sleep state machine enable */ 3808 WMI_PDEV_PARAM_DSLEEP_ENABLE, 3809 /* RX buffering flush enable */ 3810 WMI_PDEV_PARAM_PCIELP_TXBUF_FLUSH, 3811 /* RX buffering matermark */ 3812 WMI_PDEV_PARAM_PCIELP_TXBUF_WATERMARK, 3813 /* RX buffering timeout enable */ 3814 WMI_PDEV_PARAM_PCIELP_TXBUF_TMO_EN, 3815 /* RX buffering timeout value */ 3816 WMI_PDEV_PARAM_PCIELP_TXBUF_TMO_VALUE, 3817 /* pdev level stats update period in ms */ 3818 WMI_PDEV_PARAM_PDEV_STATS_UPDATE_PERIOD, 3819 /* vdev level stats update period in ms */ 3820 WMI_PDEV_PARAM_VDEV_STATS_UPDATE_PERIOD, 3821 /* peer level stats update period in ms */ 3822 WMI_PDEV_PARAM_PEER_STATS_UPDATE_PERIOD, 3823 /* beacon filter status update period */ 3824 WMI_PDEV_PARAM_BCNFLT_STATS_UPDATE_PERIOD, 3825 /* QOS Mgmt frame protection MFP/PMF 0: disable, 1: enable */ 3826 WMI_PDEV_PARAM_PMF_QOS, 3827 /* Access category on which ARP frames are sent */ 3828 WMI_PDEV_PARAM_ARP_AC_OVERRIDE, 3829 /* DCS configuration */ 3830 WMI_PDEV_PARAM_DCS, 3831 /* Enable/Disable ANI on target */ 3832 WMI_PDEV_PARAM_ANI_ENABLE, 3833 /* configure the ANI polling period */ 3834 WMI_PDEV_PARAM_ANI_POLL_PERIOD, 3835 /* configure the ANI listening period */ 3836 WMI_PDEV_PARAM_ANI_LISTEN_PERIOD, 3837 /* configure OFDM immunity level */ 3838 WMI_PDEV_PARAM_ANI_OFDM_LEVEL, 3839 /* configure CCK immunity level */ 3840 WMI_PDEV_PARAM_ANI_CCK_LEVEL, 3841 /* Enable/Disable CDD for 1x1 STAs in rate control module */ 3842 WMI_PDEV_PARAM_DYNTXCHAIN, 3843 /* Enable/Disable proxy STA */ 3844 WMI_PDEV_PARAM_PROXY_STA, 3845 /* Enable/Disable low power state when all VDEVs are inactive/idle. */ 3846 WMI_PDEV_PARAM_IDLE_PS_CONFIG, 3847 /* Enable/Disable power gating sleep */ 3848 WMI_PDEV_PARAM_POWER_GATING_SLEEP, 3849 }; 3850 3851 enum wmi_10x_pdev_param { 3852 /* TX chian mask */ 3853 WMI_10X_PDEV_PARAM_TX_CHAIN_MASK = 0x1, 3854 /* RX chian mask */ 3855 WMI_10X_PDEV_PARAM_RX_CHAIN_MASK, 3856 /* TX power limit for 2G Radio */ 3857 WMI_10X_PDEV_PARAM_TXPOWER_LIMIT2G, 3858 /* TX power limit for 5G Radio */ 3859 WMI_10X_PDEV_PARAM_TXPOWER_LIMIT5G, 3860 /* TX power scale */ 3861 WMI_10X_PDEV_PARAM_TXPOWER_SCALE, 3862 /* Beacon generation mode . 0: host, 1: target */ 3863 WMI_10X_PDEV_PARAM_BEACON_GEN_MODE, 3864 /* Beacon generation mode . 0: staggered 1: bursted */ 3865 WMI_10X_PDEV_PARAM_BEACON_TX_MODE, 3866 /* 3867 * Resource manager off chan mode . 3868 * 0: turn off off chan mode. 1: turn on offchan mode 3869 */ 3870 WMI_10X_PDEV_PARAM_RESMGR_OFFCHAN_MODE, 3871 /* 3872 * Protection mode: 3873 * 0: no protection 1:use CTS-to-self 2: use RTS/CTS 3874 */ 3875 WMI_10X_PDEV_PARAM_PROTECTION_MODE, 3876 /* Dynamic bandwidth 0: disable 1: enable */ 3877 WMI_10X_PDEV_PARAM_DYNAMIC_BW, 3878 /* Non aggregrate/ 11g sw retry threshold.0-disable */ 3879 WMI_10X_PDEV_PARAM_NON_AGG_SW_RETRY_TH, 3880 /* aggregrate sw retry threshold. 0-disable*/ 3881 WMI_10X_PDEV_PARAM_AGG_SW_RETRY_TH, 3882 /* Station kickout threshold (non of consecutive failures).0-disable */ 3883 WMI_10X_PDEV_PARAM_STA_KICKOUT_TH, 3884 /* Aggerate size scaling configuration per AC */ 3885 WMI_10X_PDEV_PARAM_AC_AGGRSIZE_SCALING, 3886 /* LTR enable */ 3887 WMI_10X_PDEV_PARAM_LTR_ENABLE, 3888 /* LTR latency for BE, in us */ 3889 WMI_10X_PDEV_PARAM_LTR_AC_LATENCY_BE, 3890 /* LTR latency for BK, in us */ 3891 WMI_10X_PDEV_PARAM_LTR_AC_LATENCY_BK, 3892 /* LTR latency for VI, in us */ 3893 WMI_10X_PDEV_PARAM_LTR_AC_LATENCY_VI, 3894 /* LTR latency for VO, in us */ 3895 WMI_10X_PDEV_PARAM_LTR_AC_LATENCY_VO, 3896 /* LTR AC latency timeout, in ms */ 3897 WMI_10X_PDEV_PARAM_LTR_AC_LATENCY_TIMEOUT, 3898 /* LTR platform latency override, in us */ 3899 WMI_10X_PDEV_PARAM_LTR_SLEEP_OVERRIDE, 3900 /* LTR-RX override, in us */ 3901 WMI_10X_PDEV_PARAM_LTR_RX_OVERRIDE, 3902 /* Tx activity timeout for LTR, in us */ 3903 WMI_10X_PDEV_PARAM_LTR_TX_ACTIVITY_TIMEOUT, 3904 /* L1SS state machine enable */ 3905 WMI_10X_PDEV_PARAM_L1SS_ENABLE, 3906 /* Deep sleep state machine enable */ 3907 WMI_10X_PDEV_PARAM_DSLEEP_ENABLE, 3908 /* pdev level stats update period in ms */ 3909 WMI_10X_PDEV_PARAM_PDEV_STATS_UPDATE_PERIOD, 3910 /* vdev level stats update period in ms */ 3911 WMI_10X_PDEV_PARAM_VDEV_STATS_UPDATE_PERIOD, 3912 /* peer level stats update period in ms */ 3913 WMI_10X_PDEV_PARAM_PEER_STATS_UPDATE_PERIOD, 3914 /* beacon filter status update period */ 3915 WMI_10X_PDEV_PARAM_BCNFLT_STATS_UPDATE_PERIOD, 3916 /* QOS Mgmt frame protection MFP/PMF 0: disable, 1: enable */ 3917 WMI_10X_PDEV_PARAM_PMF_QOS, 3918 /* Access category on which ARP and DHCP frames are sent */ 3919 WMI_10X_PDEV_PARAM_ARPDHCP_AC_OVERRIDE, 3920 /* DCS configuration */ 3921 WMI_10X_PDEV_PARAM_DCS, 3922 /* Enable/Disable ANI on target */ 3923 WMI_10X_PDEV_PARAM_ANI_ENABLE, 3924 /* configure the ANI polling period */ 3925 WMI_10X_PDEV_PARAM_ANI_POLL_PERIOD, 3926 /* configure the ANI listening period */ 3927 WMI_10X_PDEV_PARAM_ANI_LISTEN_PERIOD, 3928 /* configure OFDM immunity level */ 3929 WMI_10X_PDEV_PARAM_ANI_OFDM_LEVEL, 3930 /* configure CCK immunity level */ 3931 WMI_10X_PDEV_PARAM_ANI_CCK_LEVEL, 3932 /* Enable/Disable CDD for 1x1 STAs in rate control module */ 3933 WMI_10X_PDEV_PARAM_DYNTXCHAIN, 3934 /* Enable/Disable Fast channel reset*/ 3935 WMI_10X_PDEV_PARAM_FAST_CHANNEL_RESET, 3936 /* Set Bursting DUR */ 3937 WMI_10X_PDEV_PARAM_BURST_DUR, 3938 /* Set Bursting Enable*/ 3939 WMI_10X_PDEV_PARAM_BURST_ENABLE, 3940 3941 /* following are available as of firmware 10.2 */ 3942 WMI_10X_PDEV_PARAM_SMART_ANTENNA_DEFAULT_ANTENNA, 3943 WMI_10X_PDEV_PARAM_IGMPMLD_OVERRIDE, 3944 WMI_10X_PDEV_PARAM_IGMPMLD_TID, 3945 WMI_10X_PDEV_PARAM_ANTENNA_GAIN, 3946 WMI_10X_PDEV_PARAM_RX_DECAP_MODE, 3947 WMI_10X_PDEV_PARAM_RX_FILTER, 3948 WMI_10X_PDEV_PARAM_SET_MCAST_TO_UCAST_TID, 3949 WMI_10X_PDEV_PARAM_PROXY_STA_MODE, 3950 WMI_10X_PDEV_PARAM_SET_MCAST2UCAST_MODE, 3951 WMI_10X_PDEV_PARAM_SET_MCAST2UCAST_BUFFER, 3952 WMI_10X_PDEV_PARAM_REMOVE_MCAST2UCAST_BUFFER, 3953 WMI_10X_PDEV_PARAM_PEER_STA_PS_STATECHG_ENABLE, 3954 WMI_10X_PDEV_PARAM_RTS_FIXED_RATE, 3955 WMI_10X_PDEV_PARAM_CAL_PERIOD, 3956 WMI_10X_PDEV_PARAM_ATF_STRICT_SCH, 3957 WMI_10X_PDEV_PARAM_ATF_SCHED_DURATION, 3958 WMI_10X_PDEV_PARAM_SET_PROMISC_MODE_CMDID, 3959 WMI_10X_PDEV_PARAM_PDEV_RESET 3960 }; 3961 3962 enum wmi_10_4_pdev_param { 3963 WMI_10_4_PDEV_PARAM_TX_CHAIN_MASK = 0x1, 3964 WMI_10_4_PDEV_PARAM_RX_CHAIN_MASK, 3965 WMI_10_4_PDEV_PARAM_TXPOWER_LIMIT2G, 3966 WMI_10_4_PDEV_PARAM_TXPOWER_LIMIT5G, 3967 WMI_10_4_PDEV_PARAM_TXPOWER_SCALE, 3968 WMI_10_4_PDEV_PARAM_BEACON_GEN_MODE, 3969 WMI_10_4_PDEV_PARAM_BEACON_TX_MODE, 3970 WMI_10_4_PDEV_PARAM_RESMGR_OFFCHAN_MODE, 3971 WMI_10_4_PDEV_PARAM_PROTECTION_MODE, 3972 WMI_10_4_PDEV_PARAM_DYNAMIC_BW, 3973 WMI_10_4_PDEV_PARAM_NON_AGG_SW_RETRY_TH, 3974 WMI_10_4_PDEV_PARAM_AGG_SW_RETRY_TH, 3975 WMI_10_4_PDEV_PARAM_STA_KICKOUT_TH, 3976 WMI_10_4_PDEV_PARAM_AC_AGGRSIZE_SCALING, 3977 WMI_10_4_PDEV_PARAM_LTR_ENABLE, 3978 WMI_10_4_PDEV_PARAM_LTR_AC_LATENCY_BE, 3979 WMI_10_4_PDEV_PARAM_LTR_AC_LATENCY_BK, 3980 WMI_10_4_PDEV_PARAM_LTR_AC_LATENCY_VI, 3981 WMI_10_4_PDEV_PARAM_LTR_AC_LATENCY_VO, 3982 WMI_10_4_PDEV_PARAM_LTR_AC_LATENCY_TIMEOUT, 3983 WMI_10_4_PDEV_PARAM_LTR_SLEEP_OVERRIDE, 3984 WMI_10_4_PDEV_PARAM_LTR_RX_OVERRIDE, 3985 WMI_10_4_PDEV_PARAM_LTR_TX_ACTIVITY_TIMEOUT, 3986 WMI_10_4_PDEV_PARAM_L1SS_ENABLE, 3987 WMI_10_4_PDEV_PARAM_DSLEEP_ENABLE, 3988 WMI_10_4_PDEV_PARAM_PCIELP_TXBUF_FLUSH, 3989 WMI_10_4_PDEV_PARAM_PCIELP_TXBUF_WATERMARK, 3990 WMI_10_4_PDEV_PARAM_PCIELP_TXBUF_TMO_EN, 3991 WMI_10_4_PDEV_PARAM_PCIELP_TXBUF_TMO_VALUE, 3992 WMI_10_4_PDEV_PARAM_PDEV_STATS_UPDATE_PERIOD, 3993 WMI_10_4_PDEV_PARAM_VDEV_STATS_UPDATE_PERIOD, 3994 WMI_10_4_PDEV_PARAM_PEER_STATS_UPDATE_PERIOD, 3995 WMI_10_4_PDEV_PARAM_BCNFLT_STATS_UPDATE_PERIOD, 3996 WMI_10_4_PDEV_PARAM_PMF_QOS, 3997 WMI_10_4_PDEV_PARAM_ARP_AC_OVERRIDE, 3998 WMI_10_4_PDEV_PARAM_DCS, 3999 WMI_10_4_PDEV_PARAM_ANI_ENABLE, 4000 WMI_10_4_PDEV_PARAM_ANI_POLL_PERIOD, 4001 WMI_10_4_PDEV_PARAM_ANI_LISTEN_PERIOD, 4002 WMI_10_4_PDEV_PARAM_ANI_OFDM_LEVEL, 4003 WMI_10_4_PDEV_PARAM_ANI_CCK_LEVEL, 4004 WMI_10_4_PDEV_PARAM_DYNTXCHAIN, 4005 WMI_10_4_PDEV_PARAM_PROXY_STA, 4006 WMI_10_4_PDEV_PARAM_IDLE_PS_CONFIG, 4007 WMI_10_4_PDEV_PARAM_POWER_GATING_SLEEP, 4008 WMI_10_4_PDEV_PARAM_AGGR_BURST, 4009 WMI_10_4_PDEV_PARAM_RX_DECAP_MODE, 4010 WMI_10_4_PDEV_PARAM_FAST_CHANNEL_RESET, 4011 WMI_10_4_PDEV_PARAM_BURST_DUR, 4012 WMI_10_4_PDEV_PARAM_BURST_ENABLE, 4013 WMI_10_4_PDEV_PARAM_SMART_ANTENNA_DEFAULT_ANTENNA, 4014 WMI_10_4_PDEV_PARAM_IGMPMLD_OVERRIDE, 4015 WMI_10_4_PDEV_PARAM_IGMPMLD_TID, 4016 WMI_10_4_PDEV_PARAM_ANTENNA_GAIN, 4017 WMI_10_4_PDEV_PARAM_RX_FILTER, 4018 WMI_10_4_PDEV_SET_MCAST_TO_UCAST_TID, 4019 WMI_10_4_PDEV_PARAM_PROXY_STA_MODE, 4020 WMI_10_4_PDEV_PARAM_SET_MCAST2UCAST_MODE, 4021 WMI_10_4_PDEV_PARAM_SET_MCAST2UCAST_BUFFER, 4022 WMI_10_4_PDEV_PARAM_REMOVE_MCAST2UCAST_BUFFER, 4023 WMI_10_4_PDEV_PEER_STA_PS_STATECHG_ENABLE, 4024 WMI_10_4_PDEV_PARAM_IGMPMLD_AC_OVERRIDE, 4025 WMI_10_4_PDEV_PARAM_BLOCK_INTERBSS, 4026 WMI_10_4_PDEV_PARAM_SET_DISABLE_RESET_CMDID, 4027 WMI_10_4_PDEV_PARAM_SET_MSDU_TTL_CMDID, 4028 WMI_10_4_PDEV_PARAM_SET_PPDU_DURATION_CMDID, 4029 WMI_10_4_PDEV_PARAM_TXBF_SOUND_PERIOD_CMDID, 4030 WMI_10_4_PDEV_PARAM_SET_PROMISC_MODE_CMDID, 4031 WMI_10_4_PDEV_PARAM_SET_BURST_MODE_CMDID, 4032 WMI_10_4_PDEV_PARAM_EN_STATS, 4033 WMI_10_4_PDEV_PARAM_MU_GROUP_POLICY, 4034 WMI_10_4_PDEV_PARAM_NOISE_DETECTION, 4035 WMI_10_4_PDEV_PARAM_NOISE_THRESHOLD, 4036 WMI_10_4_PDEV_PARAM_DPD_ENABLE, 4037 WMI_10_4_PDEV_PARAM_SET_MCAST_BCAST_ECHO, 4038 WMI_10_4_PDEV_PARAM_ATF_STRICT_SCH, 4039 WMI_10_4_PDEV_PARAM_ATF_SCHED_DURATION, 4040 WMI_10_4_PDEV_PARAM_ANT_PLZN, 4041 WMI_10_4_PDEV_PARAM_MGMT_RETRY_LIMIT, 4042 WMI_10_4_PDEV_PARAM_SENSITIVITY_LEVEL, 4043 WMI_10_4_PDEV_PARAM_SIGNED_TXPOWER_2G, 4044 WMI_10_4_PDEV_PARAM_SIGNED_TXPOWER_5G, 4045 WMI_10_4_PDEV_PARAM_ENABLE_PER_TID_AMSDU, 4046 WMI_10_4_PDEV_PARAM_ENABLE_PER_TID_AMPDU, 4047 WMI_10_4_PDEV_PARAM_CCA_THRESHOLD, 4048 WMI_10_4_PDEV_PARAM_RTS_FIXED_RATE, 4049 WMI_10_4_PDEV_PARAM_CAL_PERIOD, 4050 WMI_10_4_PDEV_PARAM_PDEV_RESET, 4051 WMI_10_4_PDEV_PARAM_WAPI_MBSSID_OFFSET, 4052 WMI_10_4_PDEV_PARAM_ARP_SRCADDR, 4053 WMI_10_4_PDEV_PARAM_ARP_DSTADDR, 4054 WMI_10_4_PDEV_PARAM_TXPOWER_DECR_DB, 4055 WMI_10_4_PDEV_PARAM_RX_BATCHMODE, 4056 WMI_10_4_PDEV_PARAM_PACKET_AGGR_DELAY, 4057 WMI_10_4_PDEV_PARAM_ATF_OBSS_NOISE_SCH, 4058 WMI_10_4_PDEV_PARAM_ATF_OBSS_NOISE_SCALING_FACTOR, 4059 WMI_10_4_PDEV_PARAM_CUST_TXPOWER_SCALE, 4060 WMI_10_4_PDEV_PARAM_ATF_DYNAMIC_ENABLE, 4061 WMI_10_4_PDEV_PARAM_ATF_SSID_GROUP_POLICY, 4062 WMI_10_4_PDEV_PARAM_ENABLE_BTCOEX, 4063 }; 4064 4065 struct wmi_pdev_set_param_cmd { 4066 __le32 param_id; 4067 __le32 param_value; 4068 } __packed; 4069 4070 /* valid period is 1 ~ 60000ms, unit in millisecond */ 4071 #define WMI_PDEV_PARAM_CAL_PERIOD_MAX 60000 4072 4073 struct wmi_pdev_get_tpc_config_cmd { 4074 /* parameter */ 4075 __le32 param; 4076 } __packed; 4077 4078 #define WMI_TPC_CONFIG_PARAM 1 4079 #define WMI_TPC_FINAL_RATE_MAX 240 4080 #define WMI_TPC_TX_N_CHAIN 4 4081 #define WMI_TPC_RATE_MAX (WMI_TPC_TX_N_CHAIN * 65) 4082 #define WMI_TPC_PREAM_TABLE_MAX 10 4083 #define WMI_TPC_FLAG 3 4084 #define WMI_TPC_BUF_SIZE 10 4085 #define WMI_TPC_BEAMFORMING 2 4086 4087 enum wmi_tpc_table_type { 4088 WMI_TPC_TABLE_TYPE_CDD = 0, 4089 WMI_TPC_TABLE_TYPE_STBC = 1, 4090 WMI_TPC_TABLE_TYPE_TXBF = 2, 4091 }; 4092 4093 enum wmi_tpc_config_event_flag { 4094 WMI_TPC_CONFIG_EVENT_FLAG_TABLE_CDD = 0x1, 4095 WMI_TPC_CONFIG_EVENT_FLAG_TABLE_STBC = 0x2, 4096 WMI_TPC_CONFIG_EVENT_FLAG_TABLE_TXBF = 0x4, 4097 }; 4098 4099 struct wmi_pdev_tpc_config_event { 4100 __le32 reg_domain; 4101 __le32 chan_freq; 4102 __le32 phy_mode; 4103 __le32 twice_antenna_reduction; 4104 __le32 twice_max_rd_power; 4105 a_sle32 twice_antenna_gain; 4106 __le32 power_limit; 4107 __le32 rate_max; 4108 __le32 num_tx_chain; 4109 __le32 ctl; 4110 __le32 flags; 4111 s8 max_reg_allow_pow[WMI_TPC_TX_N_CHAIN]; 4112 s8 max_reg_allow_pow_agcdd[WMI_TPC_TX_N_CHAIN][WMI_TPC_TX_N_CHAIN]; 4113 s8 max_reg_allow_pow_agstbc[WMI_TPC_TX_N_CHAIN][WMI_TPC_TX_N_CHAIN]; 4114 s8 max_reg_allow_pow_agtxbf[WMI_TPC_TX_N_CHAIN][WMI_TPC_TX_N_CHAIN]; 4115 u8 rates_array[WMI_TPC_RATE_MAX]; 4116 } __packed; 4117 4118 /* Transmit power scale factor. */ 4119 enum wmi_tp_scale { 4120 WMI_TP_SCALE_MAX = 0, /* no scaling (default) */ 4121 WMI_TP_SCALE_50 = 1, /* 50% of max (-3 dBm) */ 4122 WMI_TP_SCALE_25 = 2, /* 25% of max (-6 dBm) */ 4123 WMI_TP_SCALE_12 = 3, /* 12% of max (-9 dBm) */ 4124 WMI_TP_SCALE_MIN = 4, /* min, but still on */ 4125 WMI_TP_SCALE_SIZE = 5, /* max num of enum */ 4126 }; 4127 4128 struct wmi_pdev_tpc_final_table_event { 4129 __le32 reg_domain; 4130 __le32 chan_freq; 4131 __le32 phy_mode; 4132 __le32 twice_antenna_reduction; 4133 __le32 twice_max_rd_power; 4134 a_sle32 twice_antenna_gain; 4135 __le32 power_limit; 4136 __le32 rate_max; 4137 __le32 num_tx_chain; 4138 __le32 ctl; 4139 __le32 flags; 4140 s8 max_reg_allow_pow[WMI_TPC_TX_N_CHAIN]; 4141 s8 max_reg_allow_pow_agcdd[WMI_TPC_TX_N_CHAIN][WMI_TPC_TX_N_CHAIN]; 4142 s8 max_reg_allow_pow_agstbc[WMI_TPC_TX_N_CHAIN][WMI_TPC_TX_N_CHAIN]; 4143 s8 max_reg_allow_pow_agtxbf[WMI_TPC_TX_N_CHAIN][WMI_TPC_TX_N_CHAIN]; 4144 u8 rates_array[WMI_TPC_FINAL_RATE_MAX]; 4145 u8 ctl_power_table[WMI_TPC_BEAMFORMING][WMI_TPC_TX_N_CHAIN] 4146 [WMI_TPC_TX_N_CHAIN]; 4147 } __packed; 4148 4149 struct wmi_pdev_get_tpc_table_cmd { 4150 __le32 param; 4151 } __packed; 4152 4153 enum wmi_tpc_pream_2ghz { 4154 WMI_TPC_PREAM_2GHZ_CCK = 0, 4155 WMI_TPC_PREAM_2GHZ_OFDM, 4156 WMI_TPC_PREAM_2GHZ_HT20, 4157 WMI_TPC_PREAM_2GHZ_HT40, 4158 WMI_TPC_PREAM_2GHZ_VHT20, 4159 WMI_TPC_PREAM_2GHZ_VHT40, 4160 WMI_TPC_PREAM_2GHZ_VHT80, 4161 }; 4162 4163 enum wmi_tpc_pream_5ghz { 4164 WMI_TPC_PREAM_5GHZ_OFDM = 1, 4165 WMI_TPC_PREAM_5GHZ_HT20, 4166 WMI_TPC_PREAM_5GHZ_HT40, 4167 WMI_TPC_PREAM_5GHZ_VHT20, 4168 WMI_TPC_PREAM_5GHZ_VHT40, 4169 WMI_TPC_PREAM_5GHZ_VHT80, 4170 WMI_TPC_PREAM_5GHZ_HTCUP, 4171 }; 4172 4173 #define WMI_PEER_PS_STATE_DISABLED 2 4174 4175 struct wmi_peer_sta_ps_state_chg_event { 4176 struct wmi_mac_addr peer_macaddr; 4177 __le32 peer_ps_state; 4178 } __packed; 4179 4180 struct wmi_pdev_chanlist_update_event { 4181 /* number of channels */ 4182 __le32 num_chan; 4183 /* array of channels */ 4184 struct wmi_channel channel_list[1]; 4185 } __packed; 4186 4187 #define WMI_MAX_DEBUG_MESG (sizeof(u32) * 32) 4188 4189 struct wmi_debug_mesg_event { 4190 /* message buffer, NULL terminated */ 4191 char bufp[WMI_MAX_DEBUG_MESG]; 4192 } __packed; 4193 4194 enum { 4195 /* P2P device */ 4196 VDEV_SUBTYPE_P2PDEV = 0, 4197 /* P2P client */ 4198 VDEV_SUBTYPE_P2PCLI, 4199 /* P2P GO */ 4200 VDEV_SUBTYPE_P2PGO, 4201 /* BT3.0 HS */ 4202 VDEV_SUBTYPE_BT, 4203 }; 4204 4205 struct wmi_pdev_set_channel_cmd { 4206 /* idnore power , only use flags , mode and freq */ 4207 struct wmi_channel chan; 4208 } __packed; 4209 4210 struct wmi_pdev_pktlog_enable_cmd { 4211 __le32 ev_bitmap; 4212 } __packed; 4213 4214 /* Customize the DSCP (bit) to TID (0-7) mapping for QOS */ 4215 #define WMI_DSCP_MAP_MAX (64) 4216 struct wmi_pdev_set_dscp_tid_map_cmd { 4217 /* map indicating DSCP to TID conversion */ 4218 __le32 dscp_to_tid_map[WMI_DSCP_MAP_MAX]; 4219 } __packed; 4220 4221 enum mcast_bcast_rate_id { 4222 WMI_SET_MCAST_RATE, 4223 WMI_SET_BCAST_RATE 4224 }; 4225 4226 struct mcast_bcast_rate { 4227 enum mcast_bcast_rate_id rate_id; 4228 __le32 rate; 4229 } __packed; 4230 4231 struct wmi_wmm_params { 4232 __le32 cwmin; 4233 __le32 cwmax; 4234 __le32 aifs; 4235 __le32 txop; 4236 __le32 acm; 4237 __le32 no_ack; 4238 } __packed; 4239 4240 struct wmi_pdev_set_wmm_params { 4241 struct wmi_wmm_params ac_be; 4242 struct wmi_wmm_params ac_bk; 4243 struct wmi_wmm_params ac_vi; 4244 struct wmi_wmm_params ac_vo; 4245 } __packed; 4246 4247 struct wmi_wmm_params_arg { 4248 u32 cwmin; 4249 u32 cwmax; 4250 u32 aifs; 4251 u32 txop; 4252 u32 acm; 4253 u32 no_ack; 4254 }; 4255 4256 struct wmi_wmm_params_all_arg { 4257 struct wmi_wmm_params_arg ac_be; 4258 struct wmi_wmm_params_arg ac_bk; 4259 struct wmi_wmm_params_arg ac_vi; 4260 struct wmi_wmm_params_arg ac_vo; 4261 }; 4262 4263 struct wmi_pdev_stats_tx { 4264 /* Num HTT cookies queued to dispatch list */ 4265 __le32 comp_queued; 4266 4267 /* Num HTT cookies dispatched */ 4268 __le32 comp_delivered; 4269 4270 /* Num MSDU queued to WAL */ 4271 __le32 msdu_enqued; 4272 4273 /* Num MPDU queue to WAL */ 4274 __le32 mpdu_enqued; 4275 4276 /* Num MSDUs dropped by WMM limit */ 4277 __le32 wmm_drop; 4278 4279 /* Num Local frames queued */ 4280 __le32 local_enqued; 4281 4282 /* Num Local frames done */ 4283 __le32 local_freed; 4284 4285 /* Num queued to HW */ 4286 __le32 hw_queued; 4287 4288 /* Num PPDU reaped from HW */ 4289 __le32 hw_reaped; 4290 4291 /* Num underruns */ 4292 __le32 underrun; 4293 4294 /* Num PPDUs cleaned up in TX abort */ 4295 __le32 tx_abort; 4296 4297 /* Num MPDUs requed by SW */ 4298 __le32 mpdus_requed; 4299 4300 /* excessive retries */ 4301 __le32 tx_ko; 4302 4303 /* data hw rate code */ 4304 __le32 data_rc; 4305 4306 /* Scheduler self triggers */ 4307 __le32 self_triggers; 4308 4309 /* frames dropped due to excessive sw retries */ 4310 __le32 sw_retry_failure; 4311 4312 /* illegal rate phy errors */ 4313 __le32 illgl_rate_phy_err; 4314 4315 /* wal pdev continuous xretry */ 4316 __le32 pdev_cont_xretry; 4317 4318 /* wal pdev continous xretry */ 4319 __le32 pdev_tx_timeout; 4320 4321 /* wal pdev resets */ 4322 __le32 pdev_resets; 4323 4324 /* frames dropped due to non-availability of stateless TIDs */ 4325 __le32 stateless_tid_alloc_failure; 4326 4327 __le32 phy_underrun; 4328 4329 /* MPDU is more than txop limit */ 4330 __le32 txop_ovf; 4331 } __packed; 4332 4333 struct wmi_10_4_pdev_stats_tx { 4334 /* Num HTT cookies queued to dispatch list */ 4335 __le32 comp_queued; 4336 4337 /* Num HTT cookies dispatched */ 4338 __le32 comp_delivered; 4339 4340 /* Num MSDU queued to WAL */ 4341 __le32 msdu_enqued; 4342 4343 /* Num MPDU queue to WAL */ 4344 __le32 mpdu_enqued; 4345 4346 /* Num MSDUs dropped by WMM limit */ 4347 __le32 wmm_drop; 4348 4349 /* Num Local frames queued */ 4350 __le32 local_enqued; 4351 4352 /* Num Local frames done */ 4353 __le32 local_freed; 4354 4355 /* Num queued to HW */ 4356 __le32 hw_queued; 4357 4358 /* Num PPDU reaped from HW */ 4359 __le32 hw_reaped; 4360 4361 /* Num underruns */ 4362 __le32 underrun; 4363 4364 /* HW Paused. */ 4365 __le32 hw_paused; 4366 4367 /* Num PPDUs cleaned up in TX abort */ 4368 __le32 tx_abort; 4369 4370 /* Num MPDUs requed by SW */ 4371 __le32 mpdus_requed; 4372 4373 /* excessive retries */ 4374 __le32 tx_ko; 4375 4376 /* data hw rate code */ 4377 __le32 data_rc; 4378 4379 /* Scheduler self triggers */ 4380 __le32 self_triggers; 4381 4382 /* frames dropped due to excessive sw retries */ 4383 __le32 sw_retry_failure; 4384 4385 /* illegal rate phy errors */ 4386 __le32 illgl_rate_phy_err; 4387 4388 /* wal pdev continuous xretry */ 4389 __le32 pdev_cont_xretry; 4390 4391 /* wal pdev tx timeouts */ 4392 __le32 pdev_tx_timeout; 4393 4394 /* wal pdev resets */ 4395 __le32 pdev_resets; 4396 4397 /* frames dropped due to non-availability of stateless TIDs */ 4398 __le32 stateless_tid_alloc_failure; 4399 4400 __le32 phy_underrun; 4401 4402 /* MPDU is more than txop limit */ 4403 __le32 txop_ovf; 4404 4405 /* Number of Sequences posted */ 4406 __le32 seq_posted; 4407 4408 /* Number of Sequences failed queueing */ 4409 __le32 seq_failed_queueing; 4410 4411 /* Number of Sequences completed */ 4412 __le32 seq_completed; 4413 4414 /* Number of Sequences restarted */ 4415 __le32 seq_restarted; 4416 4417 /* Number of MU Sequences posted */ 4418 __le32 mu_seq_posted; 4419 4420 /* Num MPDUs flushed by SW, HWPAUSED,SW TXABORT(Reset,channel change) */ 4421 __le32 mpdus_sw_flush; 4422 4423 /* Num MPDUs filtered by HW, all filter condition (TTL expired) */ 4424 __le32 mpdus_hw_filter; 4425 4426 /* Num MPDUs truncated by PDG 4427 * (TXOP, TBTT, PPDU_duration based on rate, dyn_bw) 4428 */ 4429 __le32 mpdus_truncated; 4430 4431 /* Num MPDUs that was tried but didn't receive ACK or BA */ 4432 __le32 mpdus_ack_failed; 4433 4434 /* Num MPDUs that was dropped due to expiry. */ 4435 __le32 mpdus_expired; 4436 } __packed; 4437 4438 struct wmi_pdev_stats_rx { 4439 /* Cnts any change in ring routing mid-ppdu */ 4440 __le32 mid_ppdu_route_change; 4441 4442 /* Total number of statuses processed */ 4443 __le32 status_rcvd; 4444 4445 /* Extra frags on rings 0-3 */ 4446 __le32 r0_frags; 4447 __le32 r1_frags; 4448 __le32 r2_frags; 4449 __le32 r3_frags; 4450 4451 /* MSDUs / MPDUs delivered to HTT */ 4452 __le32 htt_msdus; 4453 __le32 htt_mpdus; 4454 4455 /* MSDUs / MPDUs delivered to local stack */ 4456 __le32 loc_msdus; 4457 __le32 loc_mpdus; 4458 4459 /* AMSDUs that have more MSDUs than the status ring size */ 4460 __le32 oversize_amsdu; 4461 4462 /* Number of PHY errors */ 4463 __le32 phy_errs; 4464 4465 /* Number of PHY errors drops */ 4466 __le32 phy_err_drop; 4467 4468 /* Number of mpdu errors - FCS, MIC, ENC etc. */ 4469 __le32 mpdu_errs; 4470 } __packed; 4471 4472 struct wmi_pdev_stats_peer { 4473 /* REMOVE THIS ONCE REAL PEER STAT COUNTERS ARE ADDED */ 4474 __le32 dummy; 4475 } __packed; 4476 4477 enum wmi_stats_id { 4478 WMI_STAT_PEER = BIT(0), 4479 WMI_STAT_AP = BIT(1), 4480 WMI_STAT_PDEV = BIT(2), 4481 WMI_STAT_VDEV = BIT(3), 4482 WMI_STAT_BCNFLT = BIT(4), 4483 WMI_STAT_VDEV_RATE = BIT(5), 4484 }; 4485 4486 enum wmi_10_4_stats_id { 4487 WMI_10_4_STAT_PEER = BIT(0), 4488 WMI_10_4_STAT_AP = BIT(1), 4489 WMI_10_4_STAT_INST = BIT(2), 4490 WMI_10_4_STAT_PEER_EXTD = BIT(3), 4491 WMI_10_4_STAT_VDEV_EXTD = BIT(4), 4492 }; 4493 4494 struct wlan_inst_rssi_args { 4495 __le16 cfg_retry_count; 4496 __le16 retry_count; 4497 }; 4498 4499 struct wmi_request_stats_cmd { 4500 __le32 stats_id; 4501 4502 __le32 vdev_id; 4503 4504 /* peer MAC address */ 4505 struct wmi_mac_addr peer_macaddr; 4506 4507 /* Instantaneous RSSI arguments */ 4508 struct wlan_inst_rssi_args inst_rssi_args; 4509 } __packed; 4510 4511 /* Suspend option */ 4512 enum { 4513 /* suspend */ 4514 WMI_PDEV_SUSPEND, 4515 4516 /* suspend and disable all interrupts */ 4517 WMI_PDEV_SUSPEND_AND_DISABLE_INTR, 4518 }; 4519 4520 struct wmi_pdev_suspend_cmd { 4521 /* suspend option sent to target */ 4522 __le32 suspend_opt; 4523 } __packed; 4524 4525 struct wmi_stats_event { 4526 __le32 stats_id; /* WMI_STAT_ */ 4527 /* 4528 * number of pdev stats event structures 4529 * (wmi_pdev_stats) 0 or 1 4530 */ 4531 __le32 num_pdev_stats; 4532 /* 4533 * number of vdev stats event structures 4534 * (wmi_vdev_stats) 0 or max vdevs 4535 */ 4536 __le32 num_vdev_stats; 4537 /* 4538 * number of peer stats event structures 4539 * (wmi_peer_stats) 0 or max peers 4540 */ 4541 __le32 num_peer_stats; 4542 __le32 num_bcnflt_stats; 4543 /* 4544 * followed by 4545 * num_pdev_stats * size of(struct wmi_pdev_stats) 4546 * num_vdev_stats * size of(struct wmi_vdev_stats) 4547 * num_peer_stats * size of(struct wmi_peer_stats) 4548 * 4549 * By having a zero sized array, the pointer to data area 4550 * becomes available without increasing the struct size 4551 */ 4552 u8 data[0]; 4553 } __packed; 4554 4555 struct wmi_10_2_stats_event { 4556 __le32 stats_id; /* %WMI_REQUEST_ */ 4557 __le32 num_pdev_stats; 4558 __le32 num_pdev_ext_stats; 4559 __le32 num_vdev_stats; 4560 __le32 num_peer_stats; 4561 __le32 num_bcnflt_stats; 4562 u8 data[0]; 4563 } __packed; 4564 4565 /* 4566 * PDEV statistics 4567 * TODO: add all PDEV stats here 4568 */ 4569 struct wmi_pdev_stats_base { 4570 __le32 chan_nf; 4571 __le32 tx_frame_count; /* Cycles spent transmitting frames */ 4572 __le32 rx_frame_count; /* Cycles spent receiving frames */ 4573 __le32 rx_clear_count; /* Total channel busy time, evidently */ 4574 __le32 cycle_count; /* Total on-channel time */ 4575 __le32 phy_err_count; 4576 __le32 chan_tx_pwr; 4577 } __packed; 4578 4579 struct wmi_pdev_stats { 4580 struct wmi_pdev_stats_base base; 4581 struct wmi_pdev_stats_tx tx; 4582 struct wmi_pdev_stats_rx rx; 4583 struct wmi_pdev_stats_peer peer; 4584 } __packed; 4585 4586 struct wmi_pdev_stats_extra { 4587 __le32 ack_rx_bad; 4588 __le32 rts_bad; 4589 __le32 rts_good; 4590 __le32 fcs_bad; 4591 __le32 no_beacons; 4592 __le32 mib_int_count; 4593 } __packed; 4594 4595 struct wmi_10x_pdev_stats { 4596 struct wmi_pdev_stats_base base; 4597 struct wmi_pdev_stats_tx tx; 4598 struct wmi_pdev_stats_rx rx; 4599 struct wmi_pdev_stats_peer peer; 4600 struct wmi_pdev_stats_extra extra; 4601 } __packed; 4602 4603 struct wmi_pdev_stats_mem { 4604 __le32 dram_free; 4605 __le32 iram_free; 4606 } __packed; 4607 4608 struct wmi_10_2_pdev_stats { 4609 struct wmi_pdev_stats_base base; 4610 struct wmi_pdev_stats_tx tx; 4611 __le32 mc_drop; 4612 struct wmi_pdev_stats_rx rx; 4613 __le32 pdev_rx_timeout; 4614 struct wmi_pdev_stats_mem mem; 4615 struct wmi_pdev_stats_peer peer; 4616 struct wmi_pdev_stats_extra extra; 4617 } __packed; 4618 4619 struct wmi_10_4_pdev_stats { 4620 struct wmi_pdev_stats_base base; 4621 struct wmi_10_4_pdev_stats_tx tx; 4622 struct wmi_pdev_stats_rx rx; 4623 __le32 rx_ovfl_errs; 4624 struct wmi_pdev_stats_mem mem; 4625 __le32 sram_free_size; 4626 struct wmi_pdev_stats_extra extra; 4627 } __packed; 4628 4629 /* 4630 * VDEV statistics 4631 */ 4632 4633 #define WMI_VDEV_STATS_FTM_COUNT_VALID BIT(31) 4634 #define WMI_VDEV_STATS_FTM_COUNT_LSB 0 4635 #define WMI_VDEV_STATS_FTM_COUNT_MASK 0x7fffffff 4636 4637 struct wmi_vdev_stats { 4638 __le32 vdev_id; 4639 } __packed; 4640 4641 struct wmi_vdev_stats_extd { 4642 __le32 vdev_id; 4643 __le32 ppdu_aggr_cnt; 4644 __le32 ppdu_noack; 4645 __le32 mpdu_queued; 4646 __le32 ppdu_nonaggr_cnt; 4647 __le32 mpdu_sw_requeued; 4648 __le32 mpdu_suc_retry; 4649 __le32 mpdu_suc_multitry; 4650 __le32 mpdu_fail_retry; 4651 __le32 tx_ftm_suc; 4652 __le32 tx_ftm_suc_retry; 4653 __le32 tx_ftm_fail; 4654 __le32 rx_ftmr_cnt; 4655 __le32 rx_ftmr_dup_cnt; 4656 __le32 rx_iftmr_cnt; 4657 __le32 rx_iftmr_dup_cnt; 4658 __le32 reserved[6]; 4659 } __packed; 4660 4661 /* 4662 * peer statistics. 4663 * TODO: add more stats 4664 */ 4665 struct wmi_peer_stats { 4666 struct wmi_mac_addr peer_macaddr; 4667 __le32 peer_rssi; 4668 __le32 peer_tx_rate; 4669 } __packed; 4670 4671 struct wmi_10x_peer_stats { 4672 struct wmi_peer_stats old; 4673 __le32 peer_rx_rate; 4674 } __packed; 4675 4676 struct wmi_10_2_peer_stats { 4677 struct wmi_peer_stats old; 4678 __le32 peer_rx_rate; 4679 __le32 current_per; 4680 __le32 retries; 4681 __le32 tx_rate_count; 4682 __le32 max_4ms_frame_len; 4683 __le32 total_sub_frames; 4684 __le32 tx_bytes; 4685 __le32 num_pkt_loss_overflow[4]; 4686 __le32 num_pkt_loss_excess_retry[4]; 4687 } __packed; 4688 4689 struct wmi_10_2_4_peer_stats { 4690 struct wmi_10_2_peer_stats common; 4691 __le32 peer_rssi_changed; 4692 } __packed; 4693 4694 struct wmi_10_2_4_ext_peer_stats { 4695 struct wmi_10_2_peer_stats common; 4696 __le32 peer_rssi_changed; 4697 __le32 rx_duration; 4698 } __packed; 4699 4700 struct wmi_10_4_peer_stats { 4701 struct wmi_mac_addr peer_macaddr; 4702 __le32 peer_rssi; 4703 __le32 peer_rssi_seq_num; 4704 __le32 peer_tx_rate; 4705 __le32 peer_rx_rate; 4706 __le32 current_per; 4707 __le32 retries; 4708 __le32 tx_rate_count; 4709 __le32 max_4ms_frame_len; 4710 __le32 total_sub_frames; 4711 __le32 tx_bytes; 4712 __le32 num_pkt_loss_overflow[4]; 4713 __le32 num_pkt_loss_excess_retry[4]; 4714 __le32 peer_rssi_changed; 4715 } __packed; 4716 4717 struct wmi_10_4_peer_extd_stats { 4718 struct wmi_mac_addr peer_macaddr; 4719 __le32 inactive_time; 4720 __le32 peer_chain_rssi; 4721 __le32 rx_duration; 4722 __le32 reserved[10]; 4723 } __packed; 4724 4725 struct wmi_10_4_bss_bcn_stats { 4726 __le32 vdev_id; 4727 __le32 bss_bcns_dropped; 4728 __le32 bss_bcn_delivered; 4729 } __packed; 4730 4731 struct wmi_10_4_bss_bcn_filter_stats { 4732 __le32 bcns_dropped; 4733 __le32 bcns_delivered; 4734 __le32 active_filters; 4735 struct wmi_10_4_bss_bcn_stats bss_stats; 4736 } __packed; 4737 4738 struct wmi_10_2_pdev_ext_stats { 4739 __le32 rx_rssi_comb; 4740 __le32 rx_rssi[4]; 4741 __le32 rx_mcs[10]; 4742 __le32 tx_mcs[10]; 4743 __le32 ack_rssi; 4744 } __packed; 4745 4746 struct wmi_vdev_create_cmd { 4747 __le32 vdev_id; 4748 __le32 vdev_type; 4749 __le32 vdev_subtype; 4750 struct wmi_mac_addr vdev_macaddr; 4751 } __packed; 4752 4753 enum wmi_vdev_type { 4754 WMI_VDEV_TYPE_AP = 1, 4755 WMI_VDEV_TYPE_STA = 2, 4756 WMI_VDEV_TYPE_IBSS = 3, 4757 WMI_VDEV_TYPE_MONITOR = 4, 4758 }; 4759 4760 enum wmi_vdev_subtype { 4761 WMI_VDEV_SUBTYPE_NONE, 4762 WMI_VDEV_SUBTYPE_P2P_DEVICE, 4763 WMI_VDEV_SUBTYPE_P2P_CLIENT, 4764 WMI_VDEV_SUBTYPE_P2P_GO, 4765 WMI_VDEV_SUBTYPE_PROXY_STA, 4766 WMI_VDEV_SUBTYPE_MESH_11S, 4767 WMI_VDEV_SUBTYPE_MESH_NON_11S, 4768 }; 4769 4770 enum wmi_vdev_subtype_legacy { 4771 WMI_VDEV_SUBTYPE_LEGACY_NONE = 0, 4772 WMI_VDEV_SUBTYPE_LEGACY_P2P_DEV = 1, 4773 WMI_VDEV_SUBTYPE_LEGACY_P2P_CLI = 2, 4774 WMI_VDEV_SUBTYPE_LEGACY_P2P_GO = 3, 4775 WMI_VDEV_SUBTYPE_LEGACY_PROXY_STA = 4, 4776 }; 4777 4778 enum wmi_vdev_subtype_10_2_4 { 4779 WMI_VDEV_SUBTYPE_10_2_4_NONE = 0, 4780 WMI_VDEV_SUBTYPE_10_2_4_P2P_DEV = 1, 4781 WMI_VDEV_SUBTYPE_10_2_4_P2P_CLI = 2, 4782 WMI_VDEV_SUBTYPE_10_2_4_P2P_GO = 3, 4783 WMI_VDEV_SUBTYPE_10_2_4_PROXY_STA = 4, 4784 WMI_VDEV_SUBTYPE_10_2_4_MESH_11S = 5, 4785 }; 4786 4787 enum wmi_vdev_subtype_10_4 { 4788 WMI_VDEV_SUBTYPE_10_4_NONE = 0, 4789 WMI_VDEV_SUBTYPE_10_4_P2P_DEV = 1, 4790 WMI_VDEV_SUBTYPE_10_4_P2P_CLI = 2, 4791 WMI_VDEV_SUBTYPE_10_4_P2P_GO = 3, 4792 WMI_VDEV_SUBTYPE_10_4_PROXY_STA = 4, 4793 WMI_VDEV_SUBTYPE_10_4_MESH_NON_11S = 5, 4794 WMI_VDEV_SUBTYPE_10_4_MESH_11S = 6, 4795 }; 4796 4797 /* values for vdev_subtype */ 4798 4799 /* values for vdev_start_request flags */ 4800 /* 4801 * Indicates that AP VDEV uses hidden ssid. only valid for 4802 * AP/GO 4803 */ 4804 #define WMI_VDEV_START_HIDDEN_SSID (1 << 0) 4805 /* 4806 * Indicates if robust management frame/management frame 4807 * protection is enabled. For GO/AP vdevs, it indicates that 4808 * it may support station/client associations with RMF enabled. 4809 * For STA/client vdevs, it indicates that sta will 4810 * associate with AP with RMF enabled. 4811 */ 4812 #define WMI_VDEV_START_PMF_ENABLED (1 << 1) 4813 4814 struct wmi_p2p_noa_descriptor { 4815 __le32 type_count; /* 255: continuous schedule, 0: reserved */ 4816 __le32 duration; /* Absent period duration in micro seconds */ 4817 __le32 interval; /* Absent period interval in micro seconds */ 4818 __le32 start_time; /* 32 bit tsf time when in starts */ 4819 } __packed; 4820 4821 struct wmi_vdev_start_request_cmd { 4822 /* WMI channel */ 4823 struct wmi_channel chan; 4824 /* unique id identifying the VDEV, generated by the caller */ 4825 __le32 vdev_id; 4826 /* requestor id identifying the caller module */ 4827 __le32 requestor_id; 4828 /* beacon interval from received beacon */ 4829 __le32 beacon_interval; 4830 /* DTIM Period from the received beacon */ 4831 __le32 dtim_period; 4832 /* Flags */ 4833 __le32 flags; 4834 /* ssid field. Only valid for AP/GO/IBSS/BTAmp VDEV type. */ 4835 struct wmi_ssid ssid; 4836 /* beacon/probe response xmit rate. Applicable for SoftAP. */ 4837 __le32 bcn_tx_rate; 4838 /* beacon/probe response xmit power. Applicable for SoftAP. */ 4839 __le32 bcn_tx_power; 4840 /* number of p2p NOA descriptor(s) from scan entry */ 4841 __le32 num_noa_descriptors; 4842 /* 4843 * Disable H/W ack. This used by WMI_VDEV_RESTART_REQUEST_CMDID. 4844 * During CAC, Our HW shouldn't ack ditected frames 4845 */ 4846 __le32 disable_hw_ack; 4847 /* actual p2p NOA descriptor from scan entry */ 4848 struct wmi_p2p_noa_descriptor noa_descriptors[2]; 4849 } __packed; 4850 4851 struct wmi_vdev_restart_request_cmd { 4852 struct wmi_vdev_start_request_cmd vdev_start_request_cmd; 4853 } __packed; 4854 4855 struct wmi_vdev_start_request_arg { 4856 u32 vdev_id; 4857 struct wmi_channel_arg channel; 4858 u32 bcn_intval; 4859 u32 dtim_period; 4860 u8 *ssid; 4861 u32 ssid_len; 4862 u32 bcn_tx_rate; 4863 u32 bcn_tx_power; 4864 bool disable_hw_ack; 4865 bool hidden_ssid; 4866 bool pmf_enabled; 4867 }; 4868 4869 struct wmi_vdev_delete_cmd { 4870 /* unique id identifying the VDEV, generated by the caller */ 4871 __le32 vdev_id; 4872 } __packed; 4873 4874 struct wmi_vdev_up_cmd { 4875 __le32 vdev_id; 4876 __le32 vdev_assoc_id; 4877 struct wmi_mac_addr vdev_bssid; 4878 } __packed; 4879 4880 struct wmi_vdev_stop_cmd { 4881 __le32 vdev_id; 4882 } __packed; 4883 4884 struct wmi_vdev_down_cmd { 4885 __le32 vdev_id; 4886 } __packed; 4887 4888 struct wmi_vdev_standby_response_cmd { 4889 /* unique id identifying the VDEV, generated by the caller */ 4890 __le32 vdev_id; 4891 } __packed; 4892 4893 struct wmi_vdev_resume_response_cmd { 4894 /* unique id identifying the VDEV, generated by the caller */ 4895 __le32 vdev_id; 4896 } __packed; 4897 4898 struct wmi_vdev_set_param_cmd { 4899 __le32 vdev_id; 4900 __le32 param_id; 4901 __le32 param_value; 4902 } __packed; 4903 4904 #define WMI_MAX_KEY_INDEX 3 4905 #define WMI_MAX_KEY_LEN 32 4906 4907 #define WMI_KEY_PAIRWISE 0x00 4908 #define WMI_KEY_GROUP 0x01 4909 #define WMI_KEY_TX_USAGE 0x02 /* default tx key - static wep */ 4910 4911 struct wmi_key_seq_counter { 4912 __le32 key_seq_counter_l; 4913 __le32 key_seq_counter_h; 4914 } __packed; 4915 4916 #define WMI_CIPHER_NONE 0x0 /* clear key */ 4917 #define WMI_CIPHER_WEP 0x1 4918 #define WMI_CIPHER_TKIP 0x2 4919 #define WMI_CIPHER_AES_OCB 0x3 4920 #define WMI_CIPHER_AES_CCM 0x4 4921 #define WMI_CIPHER_WAPI 0x5 4922 #define WMI_CIPHER_CKIP 0x6 4923 #define WMI_CIPHER_AES_CMAC 0x7 4924 #define WMI_CIPHER_AES_GCM 0x8 4925 4926 struct wmi_vdev_install_key_cmd { 4927 __le32 vdev_id; 4928 struct wmi_mac_addr peer_macaddr; 4929 __le32 key_idx; 4930 __le32 key_flags; 4931 __le32 key_cipher; /* %WMI_CIPHER_ */ 4932 struct wmi_key_seq_counter key_rsc_counter; 4933 struct wmi_key_seq_counter key_global_rsc_counter; 4934 struct wmi_key_seq_counter key_tsc_counter; 4935 u8 wpi_key_rsc_counter[16]; 4936 u8 wpi_key_tsc_counter[16]; 4937 __le32 key_len; 4938 __le32 key_txmic_len; 4939 __le32 key_rxmic_len; 4940 4941 /* contains key followed by tx mic followed by rx mic */ 4942 u8 key_data[0]; 4943 } __packed; 4944 4945 struct wmi_vdev_install_key_arg { 4946 u32 vdev_id; 4947 const u8 *macaddr; 4948 u32 key_idx; 4949 u32 key_flags; 4950 u32 key_cipher; 4951 u32 key_len; 4952 u32 key_txmic_len; 4953 u32 key_rxmic_len; 4954 const void *key_data; 4955 }; 4956 4957 /* 4958 * vdev fixed rate format: 4959 * - preamble - b7:b6 - see WMI_RATE_PREMABLE_ 4960 * - nss - b5:b4 - ss number (0 mean 1ss) 4961 * - rate_mcs - b3:b0 - as below 4962 * CCK: 0 - 11Mbps, 1 - 5,5Mbps, 2 - 2Mbps, 3 - 1Mbps, 4963 * 4 - 11Mbps (s), 5 - 5,5Mbps (s), 6 - 2Mbps (s) 4964 * OFDM: 0 - 48Mbps, 1 - 24Mbps, 2 - 12Mbps, 3 - 6Mbps, 4965 * 4 - 54Mbps, 5 - 36Mbps, 6 - 18Mbps, 7 - 9Mbps 4966 * HT/VHT: MCS index 4967 */ 4968 4969 /* Preamble types to be used with VDEV fixed rate configuration */ 4970 enum wmi_rate_preamble { 4971 WMI_RATE_PREAMBLE_OFDM, 4972 WMI_RATE_PREAMBLE_CCK, 4973 WMI_RATE_PREAMBLE_HT, 4974 WMI_RATE_PREAMBLE_VHT, 4975 }; 4976 4977 #define ATH10K_HW_NSS(rate) (1 + (((rate) >> 4) & 0x3)) 4978 #define ATH10K_HW_PREAMBLE(rate) (((rate) >> 6) & 0x3) 4979 #define ATH10K_HW_MCS_RATE(rate) ((rate) & 0xf) 4980 #define ATH10K_HW_LEGACY_RATE(rate) ((rate) & 0x3f) 4981 #define ATH10K_HW_BW(flags) (((flags) >> 3) & 0x3) 4982 #define ATH10K_HW_GI(flags) (((flags) >> 5) & 0x1) 4983 #define ATH10K_HW_RATECODE(rate, nss, preamble) \ 4984 (((preamble) << 6) | ((nss) << 4) | (rate)) 4985 #define ATH10K_HW_AMPDU(flags) ((flags) & 0x1) 4986 #define ATH10K_HW_BA_FAIL(flags) (((flags) >> 1) & 0x3) 4987 4988 #define ATH10K_VHT_MCS_NUM 10 4989 #define ATH10K_BW_NUM 4 4990 #define ATH10K_NSS_NUM 4 4991 #define ATH10K_LEGACY_NUM 12 4992 #define ATH10K_GI_NUM 2 4993 #define ATH10K_HT_MCS_NUM 32 4994 #define ATH10K_RATE_TABLE_NUM 320 4995 4996 /* Value to disable fixed rate setting */ 4997 #define WMI_FIXED_RATE_NONE (0xff) 4998 4999 struct wmi_vdev_param_map { 5000 u32 rts_threshold; 5001 u32 fragmentation_threshold; 5002 u32 beacon_interval; 5003 u32 listen_interval; 5004 u32 multicast_rate; 5005 u32 mgmt_tx_rate; 5006 u32 slot_time; 5007 u32 preamble; 5008 u32 swba_time; 5009 u32 wmi_vdev_stats_update_period; 5010 u32 wmi_vdev_pwrsave_ageout_time; 5011 u32 wmi_vdev_host_swba_interval; 5012 u32 dtim_period; 5013 u32 wmi_vdev_oc_scheduler_air_time_limit; 5014 u32 wds; 5015 u32 atim_window; 5016 u32 bmiss_count_max; 5017 u32 bmiss_first_bcnt; 5018 u32 bmiss_final_bcnt; 5019 u32 feature_wmm; 5020 u32 chwidth; 5021 u32 chextoffset; 5022 u32 disable_htprotection; 5023 u32 sta_quickkickout; 5024 u32 mgmt_rate; 5025 u32 protection_mode; 5026 u32 fixed_rate; 5027 u32 sgi; 5028 u32 ldpc; 5029 u32 tx_stbc; 5030 u32 rx_stbc; 5031 u32 intra_bss_fwd; 5032 u32 def_keyid; 5033 u32 nss; 5034 u32 bcast_data_rate; 5035 u32 mcast_data_rate; 5036 u32 mcast_indicate; 5037 u32 dhcp_indicate; 5038 u32 unknown_dest_indicate; 5039 u32 ap_keepalive_min_idle_inactive_time_secs; 5040 u32 ap_keepalive_max_idle_inactive_time_secs; 5041 u32 ap_keepalive_max_unresponsive_time_secs; 5042 u32 ap_enable_nawds; 5043 u32 mcast2ucast_set; 5044 u32 enable_rtscts; 5045 u32 txbf; 5046 u32 packet_powersave; 5047 u32 drop_unencry; 5048 u32 tx_encap_type; 5049 u32 ap_detect_out_of_sync_sleeping_sta_time_secs; 5050 u32 rc_num_retries; 5051 u32 cabq_maxdur; 5052 u32 mfptest_set; 5053 u32 rts_fixed_rate; 5054 u32 vht_sgimask; 5055 u32 vht80_ratemask; 5056 u32 early_rx_adjust_enable; 5057 u32 early_rx_tgt_bmiss_num; 5058 u32 early_rx_bmiss_sample_cycle; 5059 u32 early_rx_slop_step; 5060 u32 early_rx_init_slop; 5061 u32 early_rx_adjust_pause; 5062 u32 proxy_sta; 5063 u32 meru_vc; 5064 u32 rx_decap_type; 5065 u32 bw_nss_ratemask; 5066 u32 inc_tsf; 5067 u32 dec_tsf; 5068 }; 5069 5070 #define WMI_VDEV_PARAM_UNSUPPORTED 0 5071 5072 /* the definition of different VDEV parameters */ 5073 enum wmi_vdev_param { 5074 /* RTS Threshold */ 5075 WMI_VDEV_PARAM_RTS_THRESHOLD = 0x1, 5076 /* Fragmentation threshold */ 5077 WMI_VDEV_PARAM_FRAGMENTATION_THRESHOLD, 5078 /* beacon interval in TUs */ 5079 WMI_VDEV_PARAM_BEACON_INTERVAL, 5080 /* Listen interval in TUs */ 5081 WMI_VDEV_PARAM_LISTEN_INTERVAL, 5082 /* multicast rate in Mbps */ 5083 WMI_VDEV_PARAM_MULTICAST_RATE, 5084 /* management frame rate in Mbps */ 5085 WMI_VDEV_PARAM_MGMT_TX_RATE, 5086 /* slot time (long vs short) */ 5087 WMI_VDEV_PARAM_SLOT_TIME, 5088 /* preamble (long vs short) */ 5089 WMI_VDEV_PARAM_PREAMBLE, 5090 /* SWBA time (time before tbtt in msec) */ 5091 WMI_VDEV_PARAM_SWBA_TIME, 5092 /* time period for updating VDEV stats */ 5093 WMI_VDEV_STATS_UPDATE_PERIOD, 5094 /* age out time in msec for frames queued for station in power save */ 5095 WMI_VDEV_PWRSAVE_AGEOUT_TIME, 5096 /* 5097 * Host SWBA interval (time in msec before tbtt for SWBA event 5098 * generation). 5099 */ 5100 WMI_VDEV_HOST_SWBA_INTERVAL, 5101 /* DTIM period (specified in units of num beacon intervals) */ 5102 WMI_VDEV_PARAM_DTIM_PERIOD, 5103 /* 5104 * scheduler air time limit for this VDEV. used by off chan 5105 * scheduler. 5106 */ 5107 WMI_VDEV_OC_SCHEDULER_AIR_TIME_LIMIT, 5108 /* enable/dsiable WDS for this VDEV */ 5109 WMI_VDEV_PARAM_WDS, 5110 /* ATIM Window */ 5111 WMI_VDEV_PARAM_ATIM_WINDOW, 5112 /* BMISS max */ 5113 WMI_VDEV_PARAM_BMISS_COUNT_MAX, 5114 /* BMISS first time */ 5115 WMI_VDEV_PARAM_BMISS_FIRST_BCNT, 5116 /* BMISS final time */ 5117 WMI_VDEV_PARAM_BMISS_FINAL_BCNT, 5118 /* WMM enables/disabled */ 5119 WMI_VDEV_PARAM_FEATURE_WMM, 5120 /* Channel width */ 5121 WMI_VDEV_PARAM_CHWIDTH, 5122 /* Channel Offset */ 5123 WMI_VDEV_PARAM_CHEXTOFFSET, 5124 /* Disable HT Protection */ 5125 WMI_VDEV_PARAM_DISABLE_HTPROTECTION, 5126 /* Quick STA Kickout */ 5127 WMI_VDEV_PARAM_STA_QUICKKICKOUT, 5128 /* Rate to be used with Management frames */ 5129 WMI_VDEV_PARAM_MGMT_RATE, 5130 /* Protection Mode */ 5131 WMI_VDEV_PARAM_PROTECTION_MODE, 5132 /* Fixed rate setting */ 5133 WMI_VDEV_PARAM_FIXED_RATE, 5134 /* Short GI Enable/Disable */ 5135 WMI_VDEV_PARAM_SGI, 5136 /* Enable LDPC */ 5137 WMI_VDEV_PARAM_LDPC, 5138 /* Enable Tx STBC */ 5139 WMI_VDEV_PARAM_TX_STBC, 5140 /* Enable Rx STBC */ 5141 WMI_VDEV_PARAM_RX_STBC, 5142 /* Intra BSS forwarding */ 5143 WMI_VDEV_PARAM_INTRA_BSS_FWD, 5144 /* Setting Default xmit key for Vdev */ 5145 WMI_VDEV_PARAM_DEF_KEYID, 5146 /* NSS width */ 5147 WMI_VDEV_PARAM_NSS, 5148 /* Set the custom rate for the broadcast data frames */ 5149 WMI_VDEV_PARAM_BCAST_DATA_RATE, 5150 /* Set the custom rate (rate-code) for multicast data frames */ 5151 WMI_VDEV_PARAM_MCAST_DATA_RATE, 5152 /* Tx multicast packet indicate Enable/Disable */ 5153 WMI_VDEV_PARAM_MCAST_INDICATE, 5154 /* Tx DHCP packet indicate Enable/Disable */ 5155 WMI_VDEV_PARAM_DHCP_INDICATE, 5156 /* Enable host inspection of Tx unicast packet to unknown destination */ 5157 WMI_VDEV_PARAM_UNKNOWN_DEST_INDICATE, 5158 5159 /* The minimum amount of time AP begins to consider STA inactive */ 5160 WMI_VDEV_PARAM_AP_KEEPALIVE_MIN_IDLE_INACTIVE_TIME_SECS, 5161 5162 /* 5163 * An associated STA is considered inactive when there is no recent 5164 * TX/RX activity and no downlink frames are buffered for it. Once a 5165 * STA exceeds the maximum idle inactive time, the AP will send an 5166 * 802.11 data-null as a keep alive to verify the STA is still 5167 * associated. If the STA does ACK the data-null, or if the data-null 5168 * is buffered and the STA does not retrieve it, the STA will be 5169 * considered unresponsive 5170 * (see WMI_VDEV_AP_KEEPALIVE_MAX_UNRESPONSIVE_TIME_SECS). 5171 */ 5172 WMI_VDEV_PARAM_AP_KEEPALIVE_MAX_IDLE_INACTIVE_TIME_SECS, 5173 5174 /* 5175 * An associated STA is considered unresponsive if there is no recent 5176 * TX/RX activity and downlink frames are buffered for it. Once a STA 5177 * exceeds the maximum unresponsive time, the AP will send a 5178 * WMI_STA_KICKOUT event to the host so the STA can be deleted. 5179 */ 5180 WMI_VDEV_PARAM_AP_KEEPALIVE_MAX_UNRESPONSIVE_TIME_SECS, 5181 5182 /* Enable NAWDS : MCAST INSPECT Enable, NAWDS Flag set */ 5183 WMI_VDEV_PARAM_AP_ENABLE_NAWDS, 5184 /* Enable/Disable RTS-CTS */ 5185 WMI_VDEV_PARAM_ENABLE_RTSCTS, 5186 /* Enable TXBFee/er */ 5187 WMI_VDEV_PARAM_TXBF, 5188 5189 /* Set packet power save */ 5190 WMI_VDEV_PARAM_PACKET_POWERSAVE, 5191 5192 /* 5193 * Drops un-encrypted packets if eceived in an encrypted connection 5194 * otherwise forwards to host. 5195 */ 5196 WMI_VDEV_PARAM_DROP_UNENCRY, 5197 5198 /* 5199 * Set the encapsulation type for frames. 5200 */ 5201 WMI_VDEV_PARAM_TX_ENCAP_TYPE, 5202 }; 5203 5204 /* the definition of different VDEV parameters */ 5205 enum wmi_10x_vdev_param { 5206 /* RTS Threshold */ 5207 WMI_10X_VDEV_PARAM_RTS_THRESHOLD = 0x1, 5208 /* Fragmentation threshold */ 5209 WMI_10X_VDEV_PARAM_FRAGMENTATION_THRESHOLD, 5210 /* beacon interval in TUs */ 5211 WMI_10X_VDEV_PARAM_BEACON_INTERVAL, 5212 /* Listen interval in TUs */ 5213 WMI_10X_VDEV_PARAM_LISTEN_INTERVAL, 5214 /* multicast rate in Mbps */ 5215 WMI_10X_VDEV_PARAM_MULTICAST_RATE, 5216 /* management frame rate in Mbps */ 5217 WMI_10X_VDEV_PARAM_MGMT_TX_RATE, 5218 /* slot time (long vs short) */ 5219 WMI_10X_VDEV_PARAM_SLOT_TIME, 5220 /* preamble (long vs short) */ 5221 WMI_10X_VDEV_PARAM_PREAMBLE, 5222 /* SWBA time (time before tbtt in msec) */ 5223 WMI_10X_VDEV_PARAM_SWBA_TIME, 5224 /* time period for updating VDEV stats */ 5225 WMI_10X_VDEV_STATS_UPDATE_PERIOD, 5226 /* age out time in msec for frames queued for station in power save */ 5227 WMI_10X_VDEV_PWRSAVE_AGEOUT_TIME, 5228 /* 5229 * Host SWBA interval (time in msec before tbtt for SWBA event 5230 * generation). 5231 */ 5232 WMI_10X_VDEV_HOST_SWBA_INTERVAL, 5233 /* DTIM period (specified in units of num beacon intervals) */ 5234 WMI_10X_VDEV_PARAM_DTIM_PERIOD, 5235 /* 5236 * scheduler air time limit for this VDEV. used by off chan 5237 * scheduler. 5238 */ 5239 WMI_10X_VDEV_OC_SCHEDULER_AIR_TIME_LIMIT, 5240 /* enable/dsiable WDS for this VDEV */ 5241 WMI_10X_VDEV_PARAM_WDS, 5242 /* ATIM Window */ 5243 WMI_10X_VDEV_PARAM_ATIM_WINDOW, 5244 /* BMISS max */ 5245 WMI_10X_VDEV_PARAM_BMISS_COUNT_MAX, 5246 /* WMM enables/disabled */ 5247 WMI_10X_VDEV_PARAM_FEATURE_WMM, 5248 /* Channel width */ 5249 WMI_10X_VDEV_PARAM_CHWIDTH, 5250 /* Channel Offset */ 5251 WMI_10X_VDEV_PARAM_CHEXTOFFSET, 5252 /* Disable HT Protection */ 5253 WMI_10X_VDEV_PARAM_DISABLE_HTPROTECTION, 5254 /* Quick STA Kickout */ 5255 WMI_10X_VDEV_PARAM_STA_QUICKKICKOUT, 5256 /* Rate to be used with Management frames */ 5257 WMI_10X_VDEV_PARAM_MGMT_RATE, 5258 /* Protection Mode */ 5259 WMI_10X_VDEV_PARAM_PROTECTION_MODE, 5260 /* Fixed rate setting */ 5261 WMI_10X_VDEV_PARAM_FIXED_RATE, 5262 /* Short GI Enable/Disable */ 5263 WMI_10X_VDEV_PARAM_SGI, 5264 /* Enable LDPC */ 5265 WMI_10X_VDEV_PARAM_LDPC, 5266 /* Enable Tx STBC */ 5267 WMI_10X_VDEV_PARAM_TX_STBC, 5268 /* Enable Rx STBC */ 5269 WMI_10X_VDEV_PARAM_RX_STBC, 5270 /* Intra BSS forwarding */ 5271 WMI_10X_VDEV_PARAM_INTRA_BSS_FWD, 5272 /* Setting Default xmit key for Vdev */ 5273 WMI_10X_VDEV_PARAM_DEF_KEYID, 5274 /* NSS width */ 5275 WMI_10X_VDEV_PARAM_NSS, 5276 /* Set the custom rate for the broadcast data frames */ 5277 WMI_10X_VDEV_PARAM_BCAST_DATA_RATE, 5278 /* Set the custom rate (rate-code) for multicast data frames */ 5279 WMI_10X_VDEV_PARAM_MCAST_DATA_RATE, 5280 /* Tx multicast packet indicate Enable/Disable */ 5281 WMI_10X_VDEV_PARAM_MCAST_INDICATE, 5282 /* Tx DHCP packet indicate Enable/Disable */ 5283 WMI_10X_VDEV_PARAM_DHCP_INDICATE, 5284 /* Enable host inspection of Tx unicast packet to unknown destination */ 5285 WMI_10X_VDEV_PARAM_UNKNOWN_DEST_INDICATE, 5286 5287 /* The minimum amount of time AP begins to consider STA inactive */ 5288 WMI_10X_VDEV_PARAM_AP_KEEPALIVE_MIN_IDLE_INACTIVE_TIME_SECS, 5289 5290 /* 5291 * An associated STA is considered inactive when there is no recent 5292 * TX/RX activity and no downlink frames are buffered for it. Once a 5293 * STA exceeds the maximum idle inactive time, the AP will send an 5294 * 802.11 data-null as a keep alive to verify the STA is still 5295 * associated. If the STA does ACK the data-null, or if the data-null 5296 * is buffered and the STA does not retrieve it, the STA will be 5297 * considered unresponsive 5298 * (see WMI_10X_VDEV_AP_KEEPALIVE_MAX_UNRESPONSIVE_TIME_SECS). 5299 */ 5300 WMI_10X_VDEV_PARAM_AP_KEEPALIVE_MAX_IDLE_INACTIVE_TIME_SECS, 5301 5302 /* 5303 * An associated STA is considered unresponsive if there is no recent 5304 * TX/RX activity and downlink frames are buffered for it. Once a STA 5305 * exceeds the maximum unresponsive time, the AP will send a 5306 * WMI_10X_STA_KICKOUT event to the host so the STA can be deleted. 5307 */ 5308 WMI_10X_VDEV_PARAM_AP_KEEPALIVE_MAX_UNRESPONSIVE_TIME_SECS, 5309 5310 /* Enable NAWDS : MCAST INSPECT Enable, NAWDS Flag set */ 5311 WMI_10X_VDEV_PARAM_AP_ENABLE_NAWDS, 5312 5313 WMI_10X_VDEV_PARAM_MCAST2UCAST_SET, 5314 /* Enable/Disable RTS-CTS */ 5315 WMI_10X_VDEV_PARAM_ENABLE_RTSCTS, 5316 5317 WMI_10X_VDEV_PARAM_AP_DETECT_OUT_OF_SYNC_SLEEPING_STA_TIME_SECS, 5318 5319 /* following are available as of firmware 10.2 */ 5320 WMI_10X_VDEV_PARAM_TX_ENCAP_TYPE, 5321 WMI_10X_VDEV_PARAM_CABQ_MAXDUR, 5322 WMI_10X_VDEV_PARAM_MFPTEST_SET, 5323 WMI_10X_VDEV_PARAM_RTS_FIXED_RATE, 5324 WMI_10X_VDEV_PARAM_VHT_SGIMASK, 5325 WMI_10X_VDEV_PARAM_VHT80_RATEMASK, 5326 WMI_10X_VDEV_PARAM_TSF_INCREMENT, 5327 }; 5328 5329 enum wmi_10_4_vdev_param { 5330 WMI_10_4_VDEV_PARAM_RTS_THRESHOLD = 0x1, 5331 WMI_10_4_VDEV_PARAM_FRAGMENTATION_THRESHOLD, 5332 WMI_10_4_VDEV_PARAM_BEACON_INTERVAL, 5333 WMI_10_4_VDEV_PARAM_LISTEN_INTERVAL, 5334 WMI_10_4_VDEV_PARAM_MULTICAST_RATE, 5335 WMI_10_4_VDEV_PARAM_MGMT_TX_RATE, 5336 WMI_10_4_VDEV_PARAM_SLOT_TIME, 5337 WMI_10_4_VDEV_PARAM_PREAMBLE, 5338 WMI_10_4_VDEV_PARAM_SWBA_TIME, 5339 WMI_10_4_VDEV_STATS_UPDATE_PERIOD, 5340 WMI_10_4_VDEV_PWRSAVE_AGEOUT_TIME, 5341 WMI_10_4_VDEV_HOST_SWBA_INTERVAL, 5342 WMI_10_4_VDEV_PARAM_DTIM_PERIOD, 5343 WMI_10_4_VDEV_OC_SCHEDULER_AIR_TIME_LIMIT, 5344 WMI_10_4_VDEV_PARAM_WDS, 5345 WMI_10_4_VDEV_PARAM_ATIM_WINDOW, 5346 WMI_10_4_VDEV_PARAM_BMISS_COUNT_MAX, 5347 WMI_10_4_VDEV_PARAM_BMISS_FIRST_BCNT, 5348 WMI_10_4_VDEV_PARAM_BMISS_FINAL_BCNT, 5349 WMI_10_4_VDEV_PARAM_FEATURE_WMM, 5350 WMI_10_4_VDEV_PARAM_CHWIDTH, 5351 WMI_10_4_VDEV_PARAM_CHEXTOFFSET, 5352 WMI_10_4_VDEV_PARAM_DISABLE_HTPROTECTION, 5353 WMI_10_4_VDEV_PARAM_STA_QUICKKICKOUT, 5354 WMI_10_4_VDEV_PARAM_MGMT_RATE, 5355 WMI_10_4_VDEV_PARAM_PROTECTION_MODE, 5356 WMI_10_4_VDEV_PARAM_FIXED_RATE, 5357 WMI_10_4_VDEV_PARAM_SGI, 5358 WMI_10_4_VDEV_PARAM_LDPC, 5359 WMI_10_4_VDEV_PARAM_TX_STBC, 5360 WMI_10_4_VDEV_PARAM_RX_STBC, 5361 WMI_10_4_VDEV_PARAM_INTRA_BSS_FWD, 5362 WMI_10_4_VDEV_PARAM_DEF_KEYID, 5363 WMI_10_4_VDEV_PARAM_NSS, 5364 WMI_10_4_VDEV_PARAM_BCAST_DATA_RATE, 5365 WMI_10_4_VDEV_PARAM_MCAST_DATA_RATE, 5366 WMI_10_4_VDEV_PARAM_MCAST_INDICATE, 5367 WMI_10_4_VDEV_PARAM_DHCP_INDICATE, 5368 WMI_10_4_VDEV_PARAM_UNKNOWN_DEST_INDICATE, 5369 WMI_10_4_VDEV_PARAM_AP_KEEPALIVE_MIN_IDLE_INACTIVE_TIME_SECS, 5370 WMI_10_4_VDEV_PARAM_AP_KEEPALIVE_MAX_IDLE_INACTIVE_TIME_SECS, 5371 WMI_10_4_VDEV_PARAM_AP_KEEPALIVE_MAX_UNRESPONSIVE_TIME_SECS, 5372 WMI_10_4_VDEV_PARAM_AP_ENABLE_NAWDS, 5373 WMI_10_4_VDEV_PARAM_MCAST2UCAST_SET, 5374 WMI_10_4_VDEV_PARAM_ENABLE_RTSCTS, 5375 WMI_10_4_VDEV_PARAM_RC_NUM_RETRIES, 5376 WMI_10_4_VDEV_PARAM_TXBF, 5377 WMI_10_4_VDEV_PARAM_PACKET_POWERSAVE, 5378 WMI_10_4_VDEV_PARAM_DROP_UNENCRY, 5379 WMI_10_4_VDEV_PARAM_TX_ENCAP_TYPE, 5380 WMI_10_4_VDEV_PARAM_AP_DETECT_OUT_OF_SYNC_SLEEPING_STA_TIME_SECS, 5381 WMI_10_4_VDEV_PARAM_CABQ_MAXDUR, 5382 WMI_10_4_VDEV_PARAM_MFPTEST_SET, 5383 WMI_10_4_VDEV_PARAM_RTS_FIXED_RATE, 5384 WMI_10_4_VDEV_PARAM_VHT_SGIMASK, 5385 WMI_10_4_VDEV_PARAM_VHT80_RATEMASK, 5386 WMI_10_4_VDEV_PARAM_EARLY_RX_ADJUST_ENABLE, 5387 WMI_10_4_VDEV_PARAM_EARLY_RX_TGT_BMISS_NUM, 5388 WMI_10_4_VDEV_PARAM_EARLY_RX_BMISS_SAMPLE_CYCLE, 5389 WMI_10_4_VDEV_PARAM_EARLY_RX_SLOP_STEP, 5390 WMI_10_4_VDEV_PARAM_EARLY_RX_INIT_SLOP, 5391 WMI_10_4_VDEV_PARAM_EARLY_RX_ADJUST_PAUSE, 5392 WMI_10_4_VDEV_PARAM_PROXY_STA, 5393 WMI_10_4_VDEV_PARAM_MERU_VC, 5394 WMI_10_4_VDEV_PARAM_RX_DECAP_TYPE, 5395 WMI_10_4_VDEV_PARAM_BW_NSS_RATEMASK, 5396 WMI_10_4_VDEV_PARAM_SENSOR_AP, 5397 WMI_10_4_VDEV_PARAM_BEACON_RATE, 5398 WMI_10_4_VDEV_PARAM_DTIM_ENABLE_CTS, 5399 WMI_10_4_VDEV_PARAM_STA_KICKOUT, 5400 WMI_10_4_VDEV_PARAM_CAPABILITIES, 5401 WMI_10_4_VDEV_PARAM_TSF_INCREMENT, 5402 WMI_10_4_VDEV_PARAM_RX_FILTER, 5403 WMI_10_4_VDEV_PARAM_MGMT_TX_POWER, 5404 WMI_10_4_VDEV_PARAM_ATF_SSID_SCHED_POLICY, 5405 WMI_10_4_VDEV_PARAM_DISABLE_DYN_BW_RTS, 5406 WMI_10_4_VDEV_PARAM_TSF_DECREMENT, 5407 }; 5408 5409 #define WMI_VDEV_PARAM_TXBF_SU_TX_BFEE BIT(0) 5410 #define WMI_VDEV_PARAM_TXBF_MU_TX_BFEE BIT(1) 5411 #define WMI_VDEV_PARAM_TXBF_SU_TX_BFER BIT(2) 5412 #define WMI_VDEV_PARAM_TXBF_MU_TX_BFER BIT(3) 5413 5414 #define WMI_TXBF_STS_CAP_OFFSET_LSB 4 5415 #define WMI_TXBF_STS_CAP_OFFSET_MASK 0x70 5416 #define WMI_TXBF_CONF_IMPLICIT_BF BIT(7) 5417 #define WMI_BF_SOUND_DIM_OFFSET_LSB 8 5418 #define WMI_BF_SOUND_DIM_OFFSET_MASK 0xf00 5419 5420 /* slot time long */ 5421 #define WMI_VDEV_SLOT_TIME_LONG 0x1 5422 /* slot time short */ 5423 #define WMI_VDEV_SLOT_TIME_SHORT 0x2 5424 /* preablbe long */ 5425 #define WMI_VDEV_PREAMBLE_LONG 0x1 5426 /* preablbe short */ 5427 #define WMI_VDEV_PREAMBLE_SHORT 0x2 5428 5429 enum wmi_start_event_param { 5430 WMI_VDEV_RESP_START_EVENT = 0, 5431 WMI_VDEV_RESP_RESTART_EVENT, 5432 }; 5433 5434 struct wmi_vdev_start_response_event { 5435 __le32 vdev_id; 5436 __le32 req_id; 5437 __le32 resp_type; /* %WMI_VDEV_RESP_ */ 5438 __le32 status; 5439 } __packed; 5440 5441 struct wmi_vdev_standby_req_event { 5442 /* unique id identifying the VDEV, generated by the caller */ 5443 __le32 vdev_id; 5444 } __packed; 5445 5446 struct wmi_vdev_resume_req_event { 5447 /* unique id identifying the VDEV, generated by the caller */ 5448 __le32 vdev_id; 5449 } __packed; 5450 5451 struct wmi_vdev_stopped_event { 5452 /* unique id identifying the VDEV, generated by the caller */ 5453 __le32 vdev_id; 5454 } __packed; 5455 5456 /* 5457 * common structure used for simple events 5458 * (stopped, resume_req, standby response) 5459 */ 5460 struct wmi_vdev_simple_event { 5461 /* unique id identifying the VDEV, generated by the caller */ 5462 __le32 vdev_id; 5463 } __packed; 5464 5465 /* VDEV start response status codes */ 5466 /* VDEV successfully started */ 5467 #define WMI_INIFIED_VDEV_START_RESPONSE_STATUS_SUCCESS 0x0 5468 5469 /* requested VDEV not found */ 5470 #define WMI_INIFIED_VDEV_START_RESPONSE_INVALID_VDEVID 0x1 5471 5472 /* unsupported VDEV combination */ 5473 #define WMI_INIFIED_VDEV_START_RESPONSE_NOT_SUPPORTED 0x2 5474 5475 /* TODO: please add more comments if you have in-depth information */ 5476 struct wmi_vdev_spectral_conf_cmd { 5477 __le32 vdev_id; 5478 5479 /* number of fft samples to send (0 for infinite) */ 5480 __le32 scan_count; 5481 __le32 scan_period; 5482 __le32 scan_priority; 5483 5484 /* number of bins in the FFT: 2^(fft_size - bin_scale) */ 5485 __le32 scan_fft_size; 5486 __le32 scan_gc_ena; 5487 __le32 scan_restart_ena; 5488 __le32 scan_noise_floor_ref; 5489 __le32 scan_init_delay; 5490 __le32 scan_nb_tone_thr; 5491 __le32 scan_str_bin_thr; 5492 __le32 scan_wb_rpt_mode; 5493 __le32 scan_rssi_rpt_mode; 5494 __le32 scan_rssi_thr; 5495 __le32 scan_pwr_format; 5496 5497 /* rpt_mode: Format of FFT report to software for spectral scan 5498 * triggered FFTs: 5499 * 0: No FFT report (only spectral scan summary report) 5500 * 1: 2-dword summary of metrics for each completed FFT + spectral 5501 * scan summary report 5502 * 2: 2-dword summary of metrics for each completed FFT + 5503 * 1x- oversampled bins(in-band) per FFT + spectral scan summary 5504 * report 5505 * 3: 2-dword summary of metrics for each completed FFT + 5506 * 2x- oversampled bins (all) per FFT + spectral scan summary 5507 */ 5508 __le32 scan_rpt_mode; 5509 __le32 scan_bin_scale; 5510 __le32 scan_dbm_adj; 5511 __le32 scan_chn_mask; 5512 } __packed; 5513 5514 struct wmi_vdev_spectral_conf_arg { 5515 u32 vdev_id; 5516 u32 scan_count; 5517 u32 scan_period; 5518 u32 scan_priority; 5519 u32 scan_fft_size; 5520 u32 scan_gc_ena; 5521 u32 scan_restart_ena; 5522 u32 scan_noise_floor_ref; 5523 u32 scan_init_delay; 5524 u32 scan_nb_tone_thr; 5525 u32 scan_str_bin_thr; 5526 u32 scan_wb_rpt_mode; 5527 u32 scan_rssi_rpt_mode; 5528 u32 scan_rssi_thr; 5529 u32 scan_pwr_format; 5530 u32 scan_rpt_mode; 5531 u32 scan_bin_scale; 5532 u32 scan_dbm_adj; 5533 u32 scan_chn_mask; 5534 }; 5535 5536 #define WMI_SPECTRAL_ENABLE_DEFAULT 0 5537 #define WMI_SPECTRAL_COUNT_DEFAULT 0 5538 #define WMI_SPECTRAL_PERIOD_DEFAULT 35 5539 #define WMI_SPECTRAL_PRIORITY_DEFAULT 1 5540 #define WMI_SPECTRAL_FFT_SIZE_DEFAULT 7 5541 #define WMI_SPECTRAL_GC_ENA_DEFAULT 1 5542 #define WMI_SPECTRAL_RESTART_ENA_DEFAULT 0 5543 #define WMI_SPECTRAL_NOISE_FLOOR_REF_DEFAULT -96 5544 #define WMI_SPECTRAL_INIT_DELAY_DEFAULT 80 5545 #define WMI_SPECTRAL_NB_TONE_THR_DEFAULT 12 5546 #define WMI_SPECTRAL_STR_BIN_THR_DEFAULT 8 5547 #define WMI_SPECTRAL_WB_RPT_MODE_DEFAULT 0 5548 #define WMI_SPECTRAL_RSSI_RPT_MODE_DEFAULT 0 5549 #define WMI_SPECTRAL_RSSI_THR_DEFAULT 0xf0 5550 #define WMI_SPECTRAL_PWR_FORMAT_DEFAULT 0 5551 #define WMI_SPECTRAL_RPT_MODE_DEFAULT 2 5552 #define WMI_SPECTRAL_BIN_SCALE_DEFAULT 1 5553 #define WMI_SPECTRAL_DBM_ADJ_DEFAULT 1 5554 #define WMI_SPECTRAL_CHN_MASK_DEFAULT 1 5555 5556 struct wmi_vdev_spectral_enable_cmd { 5557 __le32 vdev_id; 5558 __le32 trigger_cmd; 5559 __le32 enable_cmd; 5560 } __packed; 5561 5562 #define WMI_SPECTRAL_TRIGGER_CMD_TRIGGER 1 5563 #define WMI_SPECTRAL_TRIGGER_CMD_CLEAR 2 5564 #define WMI_SPECTRAL_ENABLE_CMD_ENABLE 1 5565 #define WMI_SPECTRAL_ENABLE_CMD_DISABLE 2 5566 5567 /* Beacon processing related command and event structures */ 5568 struct wmi_bcn_tx_hdr { 5569 __le32 vdev_id; 5570 __le32 tx_rate; 5571 __le32 tx_power; 5572 __le32 bcn_len; 5573 } __packed; 5574 5575 struct wmi_bcn_tx_cmd { 5576 struct wmi_bcn_tx_hdr hdr; 5577 u8 *bcn[0]; 5578 } __packed; 5579 5580 struct wmi_bcn_tx_arg { 5581 u32 vdev_id; 5582 u32 tx_rate; 5583 u32 tx_power; 5584 u32 bcn_len; 5585 const void *bcn; 5586 }; 5587 5588 enum wmi_bcn_tx_ref_flags { 5589 WMI_BCN_TX_REF_FLAG_DTIM_ZERO = 0x1, 5590 WMI_BCN_TX_REF_FLAG_DELIVER_CAB = 0x2, 5591 }; 5592 5593 /* TODO: It is unclear why "no antenna" works while any other seemingly valid 5594 * chainmask yields no beacons on the air at all. 5595 */ 5596 #define WMI_BCN_TX_REF_DEF_ANTENNA 0 5597 5598 struct wmi_bcn_tx_ref_cmd { 5599 __le32 vdev_id; 5600 __le32 data_len; 5601 /* physical address of the frame - dma pointer */ 5602 __le32 data_ptr; 5603 /* id for host to track */ 5604 __le32 msdu_id; 5605 /* frame ctrl to setup PPDU desc */ 5606 __le32 frame_control; 5607 /* to control CABQ traffic: WMI_BCN_TX_REF_FLAG_ */ 5608 __le32 flags; 5609 /* introduced in 10.2 */ 5610 __le32 antenna_mask; 5611 } __packed; 5612 5613 /* Beacon filter */ 5614 #define WMI_BCN_FILTER_ALL 0 /* Filter all beacons */ 5615 #define WMI_BCN_FILTER_NONE 1 /* Pass all beacons */ 5616 #define WMI_BCN_FILTER_RSSI 2 /* Pass Beacons RSSI >= RSSI threshold */ 5617 #define WMI_BCN_FILTER_BSSID 3 /* Pass Beacons with matching BSSID */ 5618 #define WMI_BCN_FILTER_SSID 4 /* Pass Beacons with matching SSID */ 5619 5620 struct wmi_bcn_filter_rx_cmd { 5621 /* Filter ID */ 5622 __le32 bcn_filter_id; 5623 /* Filter type - wmi_bcn_filter */ 5624 __le32 bcn_filter; 5625 /* Buffer len */ 5626 __le32 bcn_filter_len; 5627 /* Filter info (threshold, BSSID, RSSI) */ 5628 u8 *bcn_filter_buf; 5629 } __packed; 5630 5631 /* Capabilities and IEs to be passed to firmware */ 5632 struct wmi_bcn_prb_info { 5633 /* Capabilities */ 5634 __le32 caps; 5635 /* ERP info */ 5636 __le32 erp; 5637 /* Advanced capabilities */ 5638 /* HT capabilities */ 5639 /* HT Info */ 5640 /* ibss_dfs */ 5641 /* wpa Info */ 5642 /* rsn Info */ 5643 /* rrm info */ 5644 /* ath_ext */ 5645 /* app IE */ 5646 } __packed; 5647 5648 struct wmi_bcn_tmpl_cmd { 5649 /* unique id identifying the VDEV, generated by the caller */ 5650 __le32 vdev_id; 5651 /* TIM IE offset from the beginning of the template. */ 5652 __le32 tim_ie_offset; 5653 /* beacon probe capabilities and IEs */ 5654 struct wmi_bcn_prb_info bcn_prb_info; 5655 /* beacon buffer length */ 5656 __le32 buf_len; 5657 /* variable length data */ 5658 u8 data[1]; 5659 } __packed; 5660 5661 struct wmi_prb_tmpl_cmd { 5662 /* unique id identifying the VDEV, generated by the caller */ 5663 __le32 vdev_id; 5664 /* beacon probe capabilities and IEs */ 5665 struct wmi_bcn_prb_info bcn_prb_info; 5666 /* beacon buffer length */ 5667 __le32 buf_len; 5668 /* Variable length data */ 5669 u8 data[1]; 5670 } __packed; 5671 5672 enum wmi_sta_ps_mode { 5673 /* enable power save for the given STA VDEV */ 5674 WMI_STA_PS_MODE_DISABLED = 0, 5675 /* disable power save for a given STA VDEV */ 5676 WMI_STA_PS_MODE_ENABLED = 1, 5677 }; 5678 5679 struct wmi_sta_powersave_mode_cmd { 5680 /* unique id identifying the VDEV, generated by the caller */ 5681 __le32 vdev_id; 5682 5683 /* 5684 * Power save mode 5685 * (see enum wmi_sta_ps_mode) 5686 */ 5687 __le32 sta_ps_mode; 5688 } __packed; 5689 5690 enum wmi_csa_offload_en { 5691 WMI_CSA_OFFLOAD_DISABLE = 0, 5692 WMI_CSA_OFFLOAD_ENABLE = 1, 5693 }; 5694 5695 struct wmi_csa_offload_enable_cmd { 5696 __le32 vdev_id; 5697 __le32 csa_offload_enable; 5698 } __packed; 5699 5700 struct wmi_csa_offload_chanswitch_cmd { 5701 __le32 vdev_id; 5702 struct wmi_channel chan; 5703 } __packed; 5704 5705 /* 5706 * This parameter controls the policy for retrieving frames from AP while the 5707 * STA is in sleep state. 5708 * 5709 * Only takes affect if the sta_ps_mode is enabled 5710 */ 5711 enum wmi_sta_ps_param_rx_wake_policy { 5712 /* 5713 * Wake up when ever there is an RX activity on the VDEV. In this mode 5714 * the Power save SM(state machine) will come out of sleep by either 5715 * sending null frame (or) a data frame (with PS==0) in response to TIM 5716 * bit set in the received beacon frame from AP. 5717 */ 5718 WMI_STA_PS_RX_WAKE_POLICY_WAKE = 0, 5719 5720 /* 5721 * Here the power save state machine will not wakeup in response to TIM 5722 * bit, instead it will send a PSPOLL (or) UASPD trigger based on UAPSD 5723 * configuration setup by WMISET_PS_SET_UAPSD WMI command. When all 5724 * access categories are delivery-enabled, the station will send a 5725 * UAPSD trigger frame, otherwise it will send a PS-Poll. 5726 */ 5727 WMI_STA_PS_RX_WAKE_POLICY_POLL_UAPSD = 1, 5728 }; 5729 5730 /* 5731 * Number of tx frames/beacon that cause the power save SM to wake up. 5732 * 5733 * Value 1 causes the SM to wake up for every TX. Value 0 has a special 5734 * meaning, It will cause the SM to never wake up. This is useful if you want 5735 * to keep the system to sleep all the time for some kind of test mode . host 5736 * can change this parameter any time. It will affect at the next tx frame. 5737 */ 5738 enum wmi_sta_ps_param_tx_wake_threshold { 5739 WMI_STA_PS_TX_WAKE_THRESHOLD_NEVER = 0, 5740 WMI_STA_PS_TX_WAKE_THRESHOLD_ALWAYS = 1, 5741 5742 /* 5743 * Values greater than one indicate that many TX attempts per beacon 5744 * interval before the STA will wake up 5745 */ 5746 }; 5747 5748 /* 5749 * The maximum number of PS-Poll frames the FW will send in response to 5750 * traffic advertised in TIM before waking up (by sending a null frame with PS 5751 * = 0). Value 0 has a special meaning: there is no maximum count and the FW 5752 * will send as many PS-Poll as are necessary to retrieve buffered BU. This 5753 * parameter is used when the RX wake policy is 5754 * WMI_STA_PS_RX_WAKE_POLICY_POLL_UAPSD and ignored when the RX wake 5755 * policy is WMI_STA_PS_RX_WAKE_POLICY_WAKE. 5756 */ 5757 enum wmi_sta_ps_param_pspoll_count { 5758 WMI_STA_PS_PSPOLL_COUNT_NO_MAX = 0, 5759 /* 5760 * Values greater than 0 indicate the maximum numer of PS-Poll frames 5761 * FW will send before waking up. 5762 */ 5763 5764 /* When u-APSD is enabled the firmware will be very reluctant to exit 5765 * STA PS. This could result in very poor Rx performance with STA doing 5766 * PS-Poll for each and every buffered frame. This value is a bit 5767 * arbitrary. 5768 */ 5769 WMI_STA_PS_PSPOLL_COUNT_UAPSD = 3, 5770 }; 5771 5772 /* 5773 * This will include the delivery and trigger enabled state for every AC. 5774 * This is the negotiated state with AP. The host MLME needs to set this based 5775 * on AP capability and the state Set in the association request by the 5776 * station MLME.Lower 8 bits of the value specify the UAPSD configuration. 5777 */ 5778 #define WMI_UAPSD_AC_TYPE_DELI 0 5779 #define WMI_UAPSD_AC_TYPE_TRIG 1 5780 5781 #define WMI_UAPSD_AC_BIT_MASK(ac, type) \ 5782 (type == WMI_UAPSD_AC_TYPE_DELI ? 1 << (ac << 1) : 1 << ((ac << 1) + 1)) 5783 5784 enum wmi_sta_ps_param_uapsd { 5785 WMI_STA_PS_UAPSD_AC0_DELIVERY_EN = (1 << 0), 5786 WMI_STA_PS_UAPSD_AC0_TRIGGER_EN = (1 << 1), 5787 WMI_STA_PS_UAPSD_AC1_DELIVERY_EN = (1 << 2), 5788 WMI_STA_PS_UAPSD_AC1_TRIGGER_EN = (1 << 3), 5789 WMI_STA_PS_UAPSD_AC2_DELIVERY_EN = (1 << 4), 5790 WMI_STA_PS_UAPSD_AC2_TRIGGER_EN = (1 << 5), 5791 WMI_STA_PS_UAPSD_AC3_DELIVERY_EN = (1 << 6), 5792 WMI_STA_PS_UAPSD_AC3_TRIGGER_EN = (1 << 7), 5793 }; 5794 5795 #define WMI_STA_UAPSD_MAX_INTERVAL_MSEC UINT_MAX 5796 5797 struct wmi_sta_uapsd_auto_trig_param { 5798 __le32 wmm_ac; 5799 __le32 user_priority; 5800 __le32 service_interval; 5801 __le32 suspend_interval; 5802 __le32 delay_interval; 5803 }; 5804 5805 struct wmi_sta_uapsd_auto_trig_cmd_fixed_param { 5806 __le32 vdev_id; 5807 struct wmi_mac_addr peer_macaddr; 5808 __le32 num_ac; 5809 }; 5810 5811 struct wmi_sta_uapsd_auto_trig_arg { 5812 u32 wmm_ac; 5813 u32 user_priority; 5814 u32 service_interval; 5815 u32 suspend_interval; 5816 u32 delay_interval; 5817 }; 5818 5819 enum wmi_sta_powersave_param { 5820 /* 5821 * Controls how frames are retrievd from AP while STA is sleeping 5822 * 5823 * (see enum wmi_sta_ps_param_rx_wake_policy) 5824 */ 5825 WMI_STA_PS_PARAM_RX_WAKE_POLICY = 0, 5826 5827 /* 5828 * The STA will go active after this many TX 5829 * 5830 * (see enum wmi_sta_ps_param_tx_wake_threshold) 5831 */ 5832 WMI_STA_PS_PARAM_TX_WAKE_THRESHOLD = 1, 5833 5834 /* 5835 * Number of PS-Poll to send before STA wakes up 5836 * 5837 * (see enum wmi_sta_ps_param_pspoll_count) 5838 * 5839 */ 5840 WMI_STA_PS_PARAM_PSPOLL_COUNT = 2, 5841 5842 /* 5843 * TX/RX inactivity time in msec before going to sleep. 5844 * 5845 * The power save SM will monitor tx/rx activity on the VDEV, if no 5846 * activity for the specified msec of the parameter the Power save 5847 * SM will go to sleep. 5848 */ 5849 WMI_STA_PS_PARAM_INACTIVITY_TIME = 3, 5850 5851 /* 5852 * Set uapsd configuration. 5853 * 5854 * (see enum wmi_sta_ps_param_uapsd) 5855 */ 5856 WMI_STA_PS_PARAM_UAPSD = 4, 5857 }; 5858 5859 struct wmi_sta_powersave_param_cmd { 5860 __le32 vdev_id; 5861 __le32 param_id; /* %WMI_STA_PS_PARAM_ */ 5862 __le32 param_value; 5863 } __packed; 5864 5865 /* No MIMO power save */ 5866 #define WMI_STA_MIMO_PS_MODE_DISABLE 5867 /* mimo powersave mode static*/ 5868 #define WMI_STA_MIMO_PS_MODE_STATIC 5869 /* mimo powersave mode dynamic */ 5870 #define WMI_STA_MIMO_PS_MODE_DYNAMIC 5871 5872 struct wmi_sta_mimo_ps_mode_cmd { 5873 /* unique id identifying the VDEV, generated by the caller */ 5874 __le32 vdev_id; 5875 /* mimo powersave mode as defined above */ 5876 __le32 mimo_pwrsave_mode; 5877 } __packed; 5878 5879 /* U-APSD configuration of peer station from (re)assoc request and TSPECs */ 5880 enum wmi_ap_ps_param_uapsd { 5881 WMI_AP_PS_UAPSD_AC0_DELIVERY_EN = (1 << 0), 5882 WMI_AP_PS_UAPSD_AC0_TRIGGER_EN = (1 << 1), 5883 WMI_AP_PS_UAPSD_AC1_DELIVERY_EN = (1 << 2), 5884 WMI_AP_PS_UAPSD_AC1_TRIGGER_EN = (1 << 3), 5885 WMI_AP_PS_UAPSD_AC2_DELIVERY_EN = (1 << 4), 5886 WMI_AP_PS_UAPSD_AC2_TRIGGER_EN = (1 << 5), 5887 WMI_AP_PS_UAPSD_AC3_DELIVERY_EN = (1 << 6), 5888 WMI_AP_PS_UAPSD_AC3_TRIGGER_EN = (1 << 7), 5889 }; 5890 5891 /* U-APSD maximum service period of peer station */ 5892 enum wmi_ap_ps_peer_param_max_sp { 5893 WMI_AP_PS_PEER_PARAM_MAX_SP_UNLIMITED = 0, 5894 WMI_AP_PS_PEER_PARAM_MAX_SP_2 = 1, 5895 WMI_AP_PS_PEER_PARAM_MAX_SP_4 = 2, 5896 WMI_AP_PS_PEER_PARAM_MAX_SP_6 = 3, 5897 MAX_WMI_AP_PS_PEER_PARAM_MAX_SP, 5898 }; 5899 5900 /* 5901 * AP power save parameter 5902 * Set a power save specific parameter for a peer station 5903 */ 5904 enum wmi_ap_ps_peer_param { 5905 /* Set uapsd configuration for a given peer. 5906 * 5907 * Include the delivery and trigger enabled state for every AC. 5908 * The host MLME needs to set this based on AP capability and stations 5909 * request Set in the association request received from the station. 5910 * 5911 * Lower 8 bits of the value specify the UAPSD configuration. 5912 * 5913 * (see enum wmi_ap_ps_param_uapsd) 5914 * The default value is 0. 5915 */ 5916 WMI_AP_PS_PEER_PARAM_UAPSD = 0, 5917 5918 /* 5919 * Set the service period for a UAPSD capable station 5920 * 5921 * The service period from wme ie in the (re)assoc request frame. 5922 * 5923 * (see enum wmi_ap_ps_peer_param_max_sp) 5924 */ 5925 WMI_AP_PS_PEER_PARAM_MAX_SP = 1, 5926 5927 /* Time in seconds for aging out buffered frames for STA in PS */ 5928 WMI_AP_PS_PEER_PARAM_AGEOUT_TIME = 2, 5929 }; 5930 5931 struct wmi_ap_ps_peer_cmd { 5932 /* unique id identifying the VDEV, generated by the caller */ 5933 __le32 vdev_id; 5934 5935 /* peer MAC address */ 5936 struct wmi_mac_addr peer_macaddr; 5937 5938 /* AP powersave param (see enum wmi_ap_ps_peer_param) */ 5939 __le32 param_id; 5940 5941 /* AP powersave param value */ 5942 __le32 param_value; 5943 } __packed; 5944 5945 /* 128 clients = 4 words */ 5946 #define WMI_TIM_BITMAP_ARRAY_SIZE 4 5947 5948 struct wmi_tim_info { 5949 __le32 tim_len; 5950 __le32 tim_mcast; 5951 __le32 tim_bitmap[WMI_TIM_BITMAP_ARRAY_SIZE]; 5952 __le32 tim_changed; 5953 __le32 tim_num_ps_pending; 5954 } __packed; 5955 5956 struct wmi_tim_info_arg { 5957 __le32 tim_len; 5958 __le32 tim_mcast; 5959 const __le32 *tim_bitmap; 5960 __le32 tim_changed; 5961 __le32 tim_num_ps_pending; 5962 } __packed; 5963 5964 /* Maximum number of NOA Descriptors supported */ 5965 #define WMI_P2P_MAX_NOA_DESCRIPTORS 4 5966 #define WMI_P2P_OPPPS_ENABLE_BIT BIT(0) 5967 #define WMI_P2P_OPPPS_CTWINDOW_OFFSET 1 5968 #define WMI_P2P_NOA_CHANGED_BIT BIT(0) 5969 5970 struct wmi_p2p_noa_info { 5971 /* Bit 0 - Flag to indicate an update in NOA schedule 5972 * Bits 7-1 - Reserved 5973 */ 5974 u8 changed; 5975 /* NOA index */ 5976 u8 index; 5977 /* Bit 0 - Opp PS state of the AP 5978 * Bits 1-7 - Ctwindow in TUs 5979 */ 5980 u8 ctwindow_oppps; 5981 /* Number of NOA descriptors */ 5982 u8 num_descriptors; 5983 5984 struct wmi_p2p_noa_descriptor descriptors[WMI_P2P_MAX_NOA_DESCRIPTORS]; 5985 } __packed; 5986 5987 struct wmi_bcn_info { 5988 struct wmi_tim_info tim_info; 5989 struct wmi_p2p_noa_info p2p_noa_info; 5990 } __packed; 5991 5992 struct wmi_host_swba_event { 5993 __le32 vdev_map; 5994 struct wmi_bcn_info bcn_info[0]; 5995 } __packed; 5996 5997 struct wmi_10_2_4_bcn_info { 5998 struct wmi_tim_info tim_info; 5999 /* The 10.2.4 FW doesn't have p2p NOA info */ 6000 } __packed; 6001 6002 struct wmi_10_2_4_host_swba_event { 6003 __le32 vdev_map; 6004 struct wmi_10_2_4_bcn_info bcn_info[0]; 6005 } __packed; 6006 6007 /* 16 words = 512 client + 1 word = for guard */ 6008 #define WMI_10_4_TIM_BITMAP_ARRAY_SIZE 17 6009 6010 struct wmi_10_4_tim_info { 6011 __le32 tim_len; 6012 __le32 tim_mcast; 6013 __le32 tim_bitmap[WMI_10_4_TIM_BITMAP_ARRAY_SIZE]; 6014 __le32 tim_changed; 6015 __le32 tim_num_ps_pending; 6016 } __packed; 6017 6018 #define WMI_10_4_P2P_MAX_NOA_DESCRIPTORS 1 6019 6020 struct wmi_10_4_p2p_noa_info { 6021 /* Bit 0 - Flag to indicate an update in NOA schedule 6022 * Bits 7-1 - Reserved 6023 */ 6024 u8 changed; 6025 /* NOA index */ 6026 u8 index; 6027 /* Bit 0 - Opp PS state of the AP 6028 * Bits 1-7 - Ctwindow in TUs 6029 */ 6030 u8 ctwindow_oppps; 6031 /* Number of NOA descriptors */ 6032 u8 num_descriptors; 6033 6034 struct wmi_p2p_noa_descriptor 6035 noa_descriptors[WMI_10_4_P2P_MAX_NOA_DESCRIPTORS]; 6036 } __packed; 6037 6038 struct wmi_10_4_bcn_info { 6039 struct wmi_10_4_tim_info tim_info; 6040 struct wmi_10_4_p2p_noa_info p2p_noa_info; 6041 } __packed; 6042 6043 struct wmi_10_4_host_swba_event { 6044 __le32 vdev_map; 6045 struct wmi_10_4_bcn_info bcn_info[0]; 6046 } __packed; 6047 6048 #define WMI_MAX_AP_VDEV 16 6049 6050 struct wmi_tbtt_offset_event { 6051 __le32 vdev_map; 6052 __le32 tbttoffset_list[WMI_MAX_AP_VDEV]; 6053 } __packed; 6054 6055 struct wmi_peer_create_cmd { 6056 __le32 vdev_id; 6057 struct wmi_mac_addr peer_macaddr; 6058 __le32 peer_type; 6059 } __packed; 6060 6061 enum wmi_peer_type { 6062 WMI_PEER_TYPE_DEFAULT = 0, 6063 WMI_PEER_TYPE_BSS = 1, 6064 WMI_PEER_TYPE_TDLS = 2, 6065 }; 6066 6067 struct wmi_peer_delete_cmd { 6068 __le32 vdev_id; 6069 struct wmi_mac_addr peer_macaddr; 6070 } __packed; 6071 6072 struct wmi_peer_flush_tids_cmd { 6073 __le32 vdev_id; 6074 struct wmi_mac_addr peer_macaddr; 6075 __le32 peer_tid_bitmap; 6076 } __packed; 6077 6078 struct wmi_fixed_rate { 6079 /* 6080 * rate mode . 0: disable fixed rate (auto rate) 6081 * 1: legacy (non 11n) rate specified as ieee rate 2*Mbps 6082 * 2: ht20 11n rate specified as mcs index 6083 * 3: ht40 11n rate specified as mcs index 6084 */ 6085 __le32 rate_mode; 6086 /* 6087 * 4 rate values for 4 rate series. series 0 is stored in byte 0 (LSB) 6088 * and series 3 is stored at byte 3 (MSB) 6089 */ 6090 __le32 rate_series; 6091 /* 6092 * 4 retry counts for 4 rate series. retry count for rate 0 is stored 6093 * in byte 0 (LSB) and retry count for rate 3 is stored at byte 3 6094 * (MSB) 6095 */ 6096 __le32 rate_retries; 6097 } __packed; 6098 6099 struct wmi_peer_fixed_rate_cmd { 6100 /* unique id identifying the VDEV, generated by the caller */ 6101 __le32 vdev_id; 6102 /* peer MAC address */ 6103 struct wmi_mac_addr peer_macaddr; 6104 /* fixed rate */ 6105 struct wmi_fixed_rate peer_fixed_rate; 6106 } __packed; 6107 6108 #define WMI_MGMT_TID 17 6109 6110 struct wmi_addba_clear_resp_cmd { 6111 /* unique id identifying the VDEV, generated by the caller */ 6112 __le32 vdev_id; 6113 /* peer MAC address */ 6114 struct wmi_mac_addr peer_macaddr; 6115 } __packed; 6116 6117 struct wmi_addba_send_cmd { 6118 /* unique id identifying the VDEV, generated by the caller */ 6119 __le32 vdev_id; 6120 /* peer MAC address */ 6121 struct wmi_mac_addr peer_macaddr; 6122 /* Tid number */ 6123 __le32 tid; 6124 /* Buffer/Window size*/ 6125 __le32 buffersize; 6126 } __packed; 6127 6128 struct wmi_delba_send_cmd { 6129 /* unique id identifying the VDEV, generated by the caller */ 6130 __le32 vdev_id; 6131 /* peer MAC address */ 6132 struct wmi_mac_addr peer_macaddr; 6133 /* Tid number */ 6134 __le32 tid; 6135 /* Is Initiator */ 6136 __le32 initiator; 6137 /* Reason code */ 6138 __le32 reasoncode; 6139 } __packed; 6140 6141 struct wmi_addba_setresponse_cmd { 6142 /* unique id identifying the vdev, generated by the caller */ 6143 __le32 vdev_id; 6144 /* peer mac address */ 6145 struct wmi_mac_addr peer_macaddr; 6146 /* Tid number */ 6147 __le32 tid; 6148 /* status code */ 6149 __le32 statuscode; 6150 } __packed; 6151 6152 struct wmi_send_singleamsdu_cmd { 6153 /* unique id identifying the vdev, generated by the caller */ 6154 __le32 vdev_id; 6155 /* peer mac address */ 6156 struct wmi_mac_addr peer_macaddr; 6157 /* Tid number */ 6158 __le32 tid; 6159 } __packed; 6160 6161 enum wmi_peer_smps_state { 6162 WMI_PEER_SMPS_PS_NONE = 0x0, 6163 WMI_PEER_SMPS_STATIC = 0x1, 6164 WMI_PEER_SMPS_DYNAMIC = 0x2 6165 }; 6166 6167 enum wmi_peer_chwidth { 6168 WMI_PEER_CHWIDTH_20MHZ = 0, 6169 WMI_PEER_CHWIDTH_40MHZ = 1, 6170 WMI_PEER_CHWIDTH_80MHZ = 2, 6171 WMI_PEER_CHWIDTH_160MHZ = 3, 6172 }; 6173 6174 enum wmi_peer_param { 6175 WMI_PEER_SMPS_STATE = 0x1, /* see %wmi_peer_smps_state */ 6176 WMI_PEER_AMPDU = 0x2, 6177 WMI_PEER_AUTHORIZE = 0x3, 6178 WMI_PEER_CHAN_WIDTH = 0x4, 6179 WMI_PEER_NSS = 0x5, 6180 WMI_PEER_USE_4ADDR = 0x6, 6181 WMI_PEER_DEBUG = 0xa, 6182 WMI_PEER_PHYMODE = 0xd, 6183 WMI_PEER_DUMMY_VAR = 0xff, /* dummy parameter for STA PS workaround */ 6184 }; 6185 6186 struct wmi_peer_set_param_cmd { 6187 __le32 vdev_id; 6188 struct wmi_mac_addr peer_macaddr; 6189 __le32 param_id; 6190 __le32 param_value; 6191 } __packed; 6192 6193 #define MAX_SUPPORTED_RATES 128 6194 6195 struct wmi_rate_set { 6196 /* total number of rates */ 6197 __le32 num_rates; 6198 /* 6199 * rates (each 8bit value) packed into a 32 bit word. 6200 * the rates are filled from least significant byte to most 6201 * significant byte. 6202 */ 6203 __le32 rates[(MAX_SUPPORTED_RATES / 4) + 1]; 6204 } __packed; 6205 6206 struct wmi_rate_set_arg { 6207 unsigned int num_rates; 6208 u8 rates[MAX_SUPPORTED_RATES]; 6209 }; 6210 6211 /* 6212 * NOTE: It would bea good idea to represent the Tx MCS 6213 * info in one word and Rx in another word. This is split 6214 * into multiple words for convenience 6215 */ 6216 struct wmi_vht_rate_set { 6217 __le32 rx_max_rate; /* Max Rx data rate */ 6218 __le32 rx_mcs_set; /* Negotiated RX VHT rates */ 6219 __le32 tx_max_rate; /* Max Tx data rate */ 6220 __le32 tx_mcs_set; /* Negotiated TX VHT rates */ 6221 } __packed; 6222 6223 struct wmi_vht_rate_set_arg { 6224 u32 rx_max_rate; 6225 u32 rx_mcs_set; 6226 u32 tx_max_rate; 6227 u32 tx_mcs_set; 6228 }; 6229 6230 struct wmi_peer_set_rates_cmd { 6231 /* peer MAC address */ 6232 struct wmi_mac_addr peer_macaddr; 6233 /* legacy rate set */ 6234 struct wmi_rate_set peer_legacy_rates; 6235 /* ht rate set */ 6236 struct wmi_rate_set peer_ht_rates; 6237 } __packed; 6238 6239 struct wmi_peer_set_q_empty_callback_cmd { 6240 /* unique id identifying the VDEV, generated by the caller */ 6241 __le32 vdev_id; 6242 /* peer MAC address */ 6243 struct wmi_mac_addr peer_macaddr; 6244 __le32 callback_enable; 6245 } __packed; 6246 6247 struct wmi_peer_flags_map { 6248 u32 auth; 6249 u32 qos; 6250 u32 need_ptk_4_way; 6251 u32 need_gtk_2_way; 6252 u32 apsd; 6253 u32 ht; 6254 u32 bw40; 6255 u32 stbc; 6256 u32 ldbc; 6257 u32 dyn_mimops; 6258 u32 static_mimops; 6259 u32 spatial_mux; 6260 u32 vht; 6261 u32 bw80; 6262 u32 vht_2g; 6263 u32 pmf; 6264 u32 bw160; 6265 }; 6266 6267 enum wmi_peer_flags { 6268 WMI_PEER_AUTH = 0x00000001, 6269 WMI_PEER_QOS = 0x00000002, 6270 WMI_PEER_NEED_PTK_4_WAY = 0x00000004, 6271 WMI_PEER_NEED_GTK_2_WAY = 0x00000010, 6272 WMI_PEER_APSD = 0x00000800, 6273 WMI_PEER_HT = 0x00001000, 6274 WMI_PEER_40MHZ = 0x00002000, 6275 WMI_PEER_STBC = 0x00008000, 6276 WMI_PEER_LDPC = 0x00010000, 6277 WMI_PEER_DYN_MIMOPS = 0x00020000, 6278 WMI_PEER_STATIC_MIMOPS = 0x00040000, 6279 WMI_PEER_SPATIAL_MUX = 0x00200000, 6280 WMI_PEER_VHT = 0x02000000, 6281 WMI_PEER_80MHZ = 0x04000000, 6282 WMI_PEER_VHT_2G = 0x08000000, 6283 WMI_PEER_PMF = 0x10000000, 6284 WMI_PEER_160MHZ = 0x20000000 6285 }; 6286 6287 enum wmi_10x_peer_flags { 6288 WMI_10X_PEER_AUTH = 0x00000001, 6289 WMI_10X_PEER_QOS = 0x00000002, 6290 WMI_10X_PEER_NEED_PTK_4_WAY = 0x00000004, 6291 WMI_10X_PEER_NEED_GTK_2_WAY = 0x00000010, 6292 WMI_10X_PEER_APSD = 0x00000800, 6293 WMI_10X_PEER_HT = 0x00001000, 6294 WMI_10X_PEER_40MHZ = 0x00002000, 6295 WMI_10X_PEER_STBC = 0x00008000, 6296 WMI_10X_PEER_LDPC = 0x00010000, 6297 WMI_10X_PEER_DYN_MIMOPS = 0x00020000, 6298 WMI_10X_PEER_STATIC_MIMOPS = 0x00040000, 6299 WMI_10X_PEER_SPATIAL_MUX = 0x00200000, 6300 WMI_10X_PEER_VHT = 0x02000000, 6301 WMI_10X_PEER_80MHZ = 0x04000000, 6302 WMI_10X_PEER_160MHZ = 0x20000000 6303 }; 6304 6305 enum wmi_10_2_peer_flags { 6306 WMI_10_2_PEER_AUTH = 0x00000001, 6307 WMI_10_2_PEER_QOS = 0x00000002, 6308 WMI_10_2_PEER_NEED_PTK_4_WAY = 0x00000004, 6309 WMI_10_2_PEER_NEED_GTK_2_WAY = 0x00000010, 6310 WMI_10_2_PEER_APSD = 0x00000800, 6311 WMI_10_2_PEER_HT = 0x00001000, 6312 WMI_10_2_PEER_40MHZ = 0x00002000, 6313 WMI_10_2_PEER_STBC = 0x00008000, 6314 WMI_10_2_PEER_LDPC = 0x00010000, 6315 WMI_10_2_PEER_DYN_MIMOPS = 0x00020000, 6316 WMI_10_2_PEER_STATIC_MIMOPS = 0x00040000, 6317 WMI_10_2_PEER_SPATIAL_MUX = 0x00200000, 6318 WMI_10_2_PEER_VHT = 0x02000000, 6319 WMI_10_2_PEER_80MHZ = 0x04000000, 6320 WMI_10_2_PEER_VHT_2G = 0x08000000, 6321 WMI_10_2_PEER_PMF = 0x10000000, 6322 WMI_10_2_PEER_160MHZ = 0x20000000 6323 }; 6324 6325 /* 6326 * Peer rate capabilities. 6327 * 6328 * This is of interest to the ratecontrol 6329 * module which resides in the firmware. The bit definitions are 6330 * consistent with that defined in if_athrate.c. 6331 */ 6332 #define WMI_RC_DS_FLAG 0x01 6333 #define WMI_RC_CW40_FLAG 0x02 6334 #define WMI_RC_SGI_FLAG 0x04 6335 #define WMI_RC_HT_FLAG 0x08 6336 #define WMI_RC_RTSCTS_FLAG 0x10 6337 #define WMI_RC_TX_STBC_FLAG 0x20 6338 #define WMI_RC_RX_STBC_FLAG 0xC0 6339 #define WMI_RC_RX_STBC_FLAG_S 6 6340 #define WMI_RC_WEP_TKIP_FLAG 0x100 6341 #define WMI_RC_TS_FLAG 0x200 6342 #define WMI_RC_UAPSD_FLAG 0x400 6343 6344 /* Maximum listen interval supported by hw in units of beacon interval */ 6345 #define ATH10K_MAX_HW_LISTEN_INTERVAL 5 6346 6347 struct wmi_common_peer_assoc_complete_cmd { 6348 struct wmi_mac_addr peer_macaddr; 6349 __le32 vdev_id; 6350 __le32 peer_new_assoc; /* 1=assoc, 0=reassoc */ 6351 __le32 peer_associd; /* 16 LSBs */ 6352 __le32 peer_flags; 6353 __le32 peer_caps; /* 16 LSBs */ 6354 __le32 peer_listen_intval; 6355 __le32 peer_ht_caps; 6356 __le32 peer_max_mpdu; 6357 __le32 peer_mpdu_density; /* 0..16 */ 6358 __le32 peer_rate_caps; 6359 struct wmi_rate_set peer_legacy_rates; 6360 struct wmi_rate_set peer_ht_rates; 6361 __le32 peer_nss; /* num of spatial streams */ 6362 __le32 peer_vht_caps; 6363 __le32 peer_phymode; 6364 struct wmi_vht_rate_set peer_vht_rates; 6365 }; 6366 6367 struct wmi_main_peer_assoc_complete_cmd { 6368 struct wmi_common_peer_assoc_complete_cmd cmd; 6369 6370 /* HT Operation Element of the peer. Five bytes packed in 2 6371 * INT32 array and filled from lsb to msb. 6372 */ 6373 __le32 peer_ht_info[2]; 6374 } __packed; 6375 6376 struct wmi_10_1_peer_assoc_complete_cmd { 6377 struct wmi_common_peer_assoc_complete_cmd cmd; 6378 } __packed; 6379 6380 #define WMI_PEER_ASSOC_INFO0_MAX_MCS_IDX_LSB 0 6381 #define WMI_PEER_ASSOC_INFO0_MAX_MCS_IDX_MASK 0x0f 6382 #define WMI_PEER_ASSOC_INFO0_MAX_NSS_LSB 4 6383 #define WMI_PEER_ASSOC_INFO0_MAX_NSS_MASK 0xf0 6384 6385 struct wmi_10_2_peer_assoc_complete_cmd { 6386 struct wmi_common_peer_assoc_complete_cmd cmd; 6387 __le32 info0; /* WMI_PEER_ASSOC_INFO0_ */ 6388 } __packed; 6389 6390 #define PEER_BW_RXNSS_OVERRIDE_OFFSET 31 6391 6392 struct wmi_10_4_peer_assoc_complete_cmd { 6393 struct wmi_10_2_peer_assoc_complete_cmd cmd; 6394 __le32 peer_bw_rxnss_override; 6395 } __packed; 6396 6397 struct wmi_peer_assoc_complete_arg { 6398 u8 addr[ETH_ALEN]; 6399 u32 vdev_id; 6400 bool peer_reassoc; 6401 u16 peer_aid; 6402 u32 peer_flags; /* see %WMI_PEER_ */ 6403 u16 peer_caps; 6404 u32 peer_listen_intval; 6405 u32 peer_ht_caps; 6406 u32 peer_max_mpdu; 6407 u32 peer_mpdu_density; /* 0..16 */ 6408 u32 peer_rate_caps; /* see %WMI_RC_ */ 6409 struct wmi_rate_set_arg peer_legacy_rates; 6410 struct wmi_rate_set_arg peer_ht_rates; 6411 u32 peer_num_spatial_streams; 6412 u32 peer_vht_caps; 6413 enum wmi_phy_mode peer_phymode; 6414 struct wmi_vht_rate_set_arg peer_vht_rates; 6415 u32 peer_bw_rxnss_override; 6416 }; 6417 6418 struct wmi_peer_add_wds_entry_cmd { 6419 /* peer MAC address */ 6420 struct wmi_mac_addr peer_macaddr; 6421 /* wds MAC addr */ 6422 struct wmi_mac_addr wds_macaddr; 6423 } __packed; 6424 6425 struct wmi_peer_remove_wds_entry_cmd { 6426 /* wds MAC addr */ 6427 struct wmi_mac_addr wds_macaddr; 6428 } __packed; 6429 6430 struct wmi_peer_q_empty_callback_event { 6431 /* peer MAC address */ 6432 struct wmi_mac_addr peer_macaddr; 6433 } __packed; 6434 6435 /* 6436 * Channel info WMI event 6437 */ 6438 struct wmi_chan_info_event { 6439 __le32 err_code; 6440 __le32 freq; 6441 __le32 cmd_flags; 6442 __le32 noise_floor; 6443 __le32 rx_clear_count; 6444 __le32 cycle_count; 6445 __le32 chan_tx_pwr_range; 6446 __le32 chan_tx_pwr_tp; 6447 __le32 rx_frame_count; 6448 __le32 my_bss_rx_cycle_count; 6449 __le32 rx_11b_mode_data_duration; 6450 __le32 tx_frame_cnt; 6451 __le32 mac_clk_mhz; 6452 6453 } __packed; 6454 6455 struct wmi_10_4_chan_info_event { 6456 __le32 err_code; 6457 __le32 freq; 6458 __le32 cmd_flags; 6459 __le32 noise_floor; 6460 __le32 rx_clear_count; 6461 __le32 cycle_count; 6462 __le32 chan_tx_pwr_range; 6463 __le32 chan_tx_pwr_tp; 6464 __le32 rx_frame_count; 6465 } __packed; 6466 6467 struct wmi_peer_sta_kickout_event { 6468 struct wmi_mac_addr peer_macaddr; 6469 } __packed; 6470 6471 #define WMI_CHAN_INFO_FLAG_COMPLETE BIT(0) 6472 #define WMI_CHAN_INFO_FLAG_PRE_COMPLETE BIT(1) 6473 6474 /* Beacon filter wmi command info */ 6475 #define BCN_FLT_MAX_SUPPORTED_IES 256 6476 #define BCN_FLT_MAX_ELEMS_IE_LIST (BCN_FLT_MAX_SUPPORTED_IES / 32) 6477 6478 struct bss_bcn_stats { 6479 __le32 vdev_id; 6480 __le32 bss_bcnsdropped; 6481 __le32 bss_bcnsdelivered; 6482 } __packed; 6483 6484 struct bcn_filter_stats { 6485 __le32 bcns_dropped; 6486 __le32 bcns_delivered; 6487 __le32 activefilters; 6488 struct bss_bcn_stats bss_stats; 6489 } __packed; 6490 6491 struct wmi_add_bcn_filter_cmd { 6492 u32 vdev_id; 6493 u32 ie_map[BCN_FLT_MAX_ELEMS_IE_LIST]; 6494 } __packed; 6495 6496 enum wmi_sta_keepalive_method { 6497 WMI_STA_KEEPALIVE_METHOD_NULL_FRAME = 1, 6498 WMI_STA_KEEPALIVE_METHOD_UNSOLICITATED_ARP_RESPONSE = 2, 6499 }; 6500 6501 #define WMI_STA_KEEPALIVE_INTERVAL_DISABLE 0 6502 6503 /* Firmware crashes if keepalive interval exceeds this limit */ 6504 #define WMI_STA_KEEPALIVE_INTERVAL_MAX_SECONDS 0xffff 6505 6506 /* note: ip4 addresses are in network byte order, i.e. big endian */ 6507 struct wmi_sta_keepalive_arp_resp { 6508 __be32 src_ip4_addr; 6509 __be32 dest_ip4_addr; 6510 struct wmi_mac_addr dest_mac_addr; 6511 } __packed; 6512 6513 struct wmi_sta_keepalive_cmd { 6514 __le32 vdev_id; 6515 __le32 enabled; 6516 __le32 method; /* WMI_STA_KEEPALIVE_METHOD_ */ 6517 __le32 interval; /* in seconds */ 6518 struct wmi_sta_keepalive_arp_resp arp_resp; 6519 } __packed; 6520 6521 struct wmi_sta_keepalive_arg { 6522 u32 vdev_id; 6523 u32 enabled; 6524 u32 method; 6525 u32 interval; 6526 __be32 src_ip4_addr; 6527 __be32 dest_ip4_addr; 6528 const u8 dest_mac_addr[ETH_ALEN]; 6529 }; 6530 6531 enum wmi_force_fw_hang_type { 6532 WMI_FORCE_FW_HANG_ASSERT = 1, 6533 WMI_FORCE_FW_HANG_NO_DETECT, 6534 WMI_FORCE_FW_HANG_CTRL_EP_FULL, 6535 WMI_FORCE_FW_HANG_EMPTY_POINT, 6536 WMI_FORCE_FW_HANG_STACK_OVERFLOW, 6537 WMI_FORCE_FW_HANG_INFINITE_LOOP, 6538 }; 6539 6540 #define WMI_FORCE_FW_HANG_RANDOM_TIME 0xFFFFFFFF 6541 6542 struct wmi_force_fw_hang_cmd { 6543 __le32 type; 6544 __le32 delay_ms; 6545 } __packed; 6546 6547 enum wmi_pdev_reset_mode_type { 6548 WMI_RST_MODE_TX_FLUSH = 1, 6549 WMI_RST_MODE_WARM_RESET, 6550 WMI_RST_MODE_COLD_RESET, 6551 WMI_RST_MODE_WARM_RESET_RESTORE_CAL, 6552 WMI_RST_MODE_COLD_RESET_RESTORE_CAL, 6553 WMI_RST_MODE_MAX, 6554 }; 6555 6556 enum ath10k_dbglog_level { 6557 ATH10K_DBGLOG_LEVEL_VERBOSE = 0, 6558 ATH10K_DBGLOG_LEVEL_INFO = 1, 6559 ATH10K_DBGLOG_LEVEL_WARN = 2, 6560 ATH10K_DBGLOG_LEVEL_ERR = 3, 6561 }; 6562 6563 /* VAP ids to enable dbglog */ 6564 #define ATH10K_DBGLOG_CFG_VAP_LOG_LSB 0 6565 #define ATH10K_DBGLOG_CFG_VAP_LOG_MASK 0x0000ffff 6566 6567 /* to enable dbglog in the firmware */ 6568 #define ATH10K_DBGLOG_CFG_REPORTING_ENABLE_LSB 16 6569 #define ATH10K_DBGLOG_CFG_REPORTING_ENABLE_MASK 0x00010000 6570 6571 /* timestamp resolution */ 6572 #define ATH10K_DBGLOG_CFG_RESOLUTION_LSB 17 6573 #define ATH10K_DBGLOG_CFG_RESOLUTION_MASK 0x000E0000 6574 6575 /* number of queued messages before sending them to the host */ 6576 #define ATH10K_DBGLOG_CFG_REPORT_SIZE_LSB 20 6577 #define ATH10K_DBGLOG_CFG_REPORT_SIZE_MASK 0x0ff00000 6578 6579 /* 6580 * Log levels to enable. This defines the minimum level to enable, this is 6581 * not a bitmask. See enum ath10k_dbglog_level for the values. 6582 */ 6583 #define ATH10K_DBGLOG_CFG_LOG_LVL_LSB 28 6584 #define ATH10K_DBGLOG_CFG_LOG_LVL_MASK 0x70000000 6585 6586 /* 6587 * Note: this is a cleaned up version of a struct firmware uses. For 6588 * example, config_valid was hidden inside an array. 6589 */ 6590 struct wmi_dbglog_cfg_cmd { 6591 /* bitmask to hold mod id config*/ 6592 __le32 module_enable; 6593 6594 /* see ATH10K_DBGLOG_CFG_ */ 6595 __le32 config_enable; 6596 6597 /* mask of module id bits to be changed */ 6598 __le32 module_valid; 6599 6600 /* mask of config bits to be changed, see ATH10K_DBGLOG_CFG_ */ 6601 __le32 config_valid; 6602 } __packed; 6603 6604 struct wmi_10_4_dbglog_cfg_cmd { 6605 /* bitmask to hold mod id config*/ 6606 __le64 module_enable; 6607 6608 /* see ATH10K_DBGLOG_CFG_ */ 6609 __le32 config_enable; 6610 6611 /* mask of module id bits to be changed */ 6612 __le64 module_valid; 6613 6614 /* mask of config bits to be changed, see ATH10K_DBGLOG_CFG_ */ 6615 __le32 config_valid; 6616 } __packed; 6617 6618 enum wmi_roam_reason { 6619 WMI_ROAM_REASON_BETTER_AP = 1, 6620 WMI_ROAM_REASON_BEACON_MISS = 2, 6621 WMI_ROAM_REASON_LOW_RSSI = 3, 6622 WMI_ROAM_REASON_SUITABLE_AP_FOUND = 4, 6623 WMI_ROAM_REASON_HO_FAILED = 5, 6624 6625 /* keep last */ 6626 WMI_ROAM_REASON_MAX, 6627 }; 6628 6629 struct wmi_roam_ev { 6630 __le32 vdev_id; 6631 __le32 reason; 6632 } __packed; 6633 6634 #define ATH10K_FRAGMT_THRESHOLD_MIN 540 6635 #define ATH10K_FRAGMT_THRESHOLD_MAX 2346 6636 6637 #define WMI_MAX_EVENT 0x1000 6638 /* Maximum number of pending TXed WMI packets */ 6639 #define WMI_SKB_HEADROOM sizeof(struct wmi_cmd_hdr) 6640 6641 /* By default disable power save for IBSS */ 6642 #define ATH10K_DEFAULT_ATIM 0 6643 6644 #define WMI_MAX_MEM_REQS 16 6645 6646 struct wmi_scan_ev_arg { 6647 __le32 event_type; /* %WMI_SCAN_EVENT_ */ 6648 __le32 reason; /* %WMI_SCAN_REASON_ */ 6649 __le32 channel_freq; /* only valid for WMI_SCAN_EVENT_FOREIGN_CHANNEL */ 6650 __le32 scan_req_id; 6651 __le32 scan_id; 6652 __le32 vdev_id; 6653 }; 6654 6655 struct wmi_tlv_mgmt_tx_compl_ev_arg { 6656 __le32 desc_id; 6657 __le32 status; 6658 __le32 pdev_id; 6659 }; 6660 6661 struct wmi_mgmt_rx_ev_arg { 6662 __le32 channel; 6663 __le32 snr; 6664 __le32 rate; 6665 __le32 phy_mode; 6666 __le32 buf_len; 6667 __le32 status; /* %WMI_RX_STATUS_ */ 6668 struct wmi_mgmt_rx_ext_info ext_info; 6669 }; 6670 6671 struct wmi_ch_info_ev_arg { 6672 __le32 err_code; 6673 __le32 freq; 6674 __le32 cmd_flags; 6675 __le32 noise_floor; 6676 __le32 rx_clear_count; 6677 __le32 cycle_count; 6678 __le32 chan_tx_pwr_range; 6679 __le32 chan_tx_pwr_tp; 6680 __le32 rx_frame_count; 6681 __le32 my_bss_rx_cycle_count; 6682 __le32 rx_11b_mode_data_duration; 6683 __le32 tx_frame_cnt; 6684 __le32 mac_clk_mhz; 6685 }; 6686 6687 /* From 10.4 firmware, not sure all have the same values. */ 6688 enum wmi_vdev_start_status { 6689 WMI_VDEV_START_OK = 0, 6690 WMI_VDEV_START_CHAN_INVALID, 6691 }; 6692 6693 struct wmi_vdev_start_ev_arg { 6694 __le32 vdev_id; 6695 __le32 req_id; 6696 __le32 resp_type; /* %WMI_VDEV_RESP_ */ 6697 __le32 status; /* See wmi_vdev_start_status enum above */ 6698 }; 6699 6700 struct wmi_peer_kick_ev_arg { 6701 const u8 *mac_addr; 6702 }; 6703 6704 struct wmi_swba_ev_arg { 6705 __le32 vdev_map; 6706 struct wmi_tim_info_arg tim_info[WMI_MAX_AP_VDEV]; 6707 const struct wmi_p2p_noa_info *noa_info[WMI_MAX_AP_VDEV]; 6708 }; 6709 6710 struct wmi_phyerr_ev_arg { 6711 u32 tsf_timestamp; 6712 u16 freq1; 6713 u16 freq2; 6714 u8 rssi_combined; 6715 u8 chan_width_mhz; 6716 u8 phy_err_code; 6717 u16 nf_chains[4]; 6718 u32 buf_len; 6719 const u8 *buf; 6720 u8 hdr_len; 6721 }; 6722 6723 struct wmi_phyerr_hdr_arg { 6724 u32 num_phyerrs; 6725 u32 tsf_l32; 6726 u32 tsf_u32; 6727 u32 buf_len; 6728 const void *phyerrs; 6729 }; 6730 6731 struct wmi_dfs_status_ev_arg { 6732 u32 status; 6733 }; 6734 6735 struct wmi_svc_rdy_ev_arg { 6736 __le32 min_tx_power; 6737 __le32 max_tx_power; 6738 __le32 ht_cap; 6739 __le32 vht_cap; 6740 __le32 sw_ver0; 6741 __le32 sw_ver1; 6742 __le32 fw_build; 6743 __le32 phy_capab; 6744 __le32 num_rf_chains; 6745 __le32 eeprom_rd; 6746 __le32 num_mem_reqs; 6747 __le32 low_5ghz_chan; 6748 __le32 high_5ghz_chan; 6749 const __le32 *service_map; 6750 size_t service_map_len; 6751 const struct wlan_host_mem_req *mem_reqs[WMI_MAX_MEM_REQS]; 6752 }; 6753 6754 struct wmi_svc_avail_ev_arg { 6755 __le32 service_map_ext_len; 6756 const __le32 *service_map_ext; 6757 }; 6758 6759 struct wmi_rdy_ev_arg { 6760 __le32 sw_version; 6761 __le32 abi_version; 6762 __le32 status; 6763 const u8 *mac_addr; 6764 }; 6765 6766 struct wmi_roam_ev_arg { 6767 __le32 vdev_id; 6768 __le32 reason; 6769 __le32 rssi; 6770 }; 6771 6772 struct wmi_echo_ev_arg { 6773 __le32 value; 6774 }; 6775 6776 struct wmi_pdev_temperature_event { 6777 /* temperature value in Celcius degree */ 6778 __le32 temperature; 6779 } __packed; 6780 6781 struct wmi_pdev_bss_chan_info_event { 6782 __le32 freq; 6783 __le32 noise_floor; 6784 __le64 cycle_busy; 6785 __le64 cycle_total; 6786 __le64 cycle_tx; 6787 __le64 cycle_rx; 6788 __le64 cycle_rx_bss; 6789 __le32 reserved; 6790 } __packed; 6791 6792 /* WOW structures */ 6793 enum wmi_wow_wakeup_event { 6794 WOW_BMISS_EVENT = 0, 6795 WOW_BETTER_AP_EVENT, 6796 WOW_DEAUTH_RECVD_EVENT, 6797 WOW_MAGIC_PKT_RECVD_EVENT, 6798 WOW_GTK_ERR_EVENT, 6799 WOW_FOURWAY_HSHAKE_EVENT, 6800 WOW_EAPOL_RECVD_EVENT, 6801 WOW_NLO_DETECTED_EVENT, 6802 WOW_DISASSOC_RECVD_EVENT, 6803 WOW_PATTERN_MATCH_EVENT, 6804 WOW_CSA_IE_EVENT, 6805 WOW_PROBE_REQ_WPS_IE_EVENT, 6806 WOW_AUTH_REQ_EVENT, 6807 WOW_ASSOC_REQ_EVENT, 6808 WOW_HTT_EVENT, 6809 WOW_RA_MATCH_EVENT, 6810 WOW_HOST_AUTO_SHUTDOWN_EVENT, 6811 WOW_IOAC_MAGIC_EVENT, 6812 WOW_IOAC_SHORT_EVENT, 6813 WOW_IOAC_EXTEND_EVENT, 6814 WOW_IOAC_TIMER_EVENT, 6815 WOW_DFS_PHYERR_RADAR_EVENT, 6816 WOW_BEACON_EVENT, 6817 WOW_CLIENT_KICKOUT_EVENT, 6818 WOW_EVENT_MAX, 6819 }; 6820 6821 #define C2S(x) case x: return #x 6822 6823 static inline const char *wow_wakeup_event(enum wmi_wow_wakeup_event ev) 6824 { 6825 switch (ev) { 6826 C2S(WOW_BMISS_EVENT); 6827 C2S(WOW_BETTER_AP_EVENT); 6828 C2S(WOW_DEAUTH_RECVD_EVENT); 6829 C2S(WOW_MAGIC_PKT_RECVD_EVENT); 6830 C2S(WOW_GTK_ERR_EVENT); 6831 C2S(WOW_FOURWAY_HSHAKE_EVENT); 6832 C2S(WOW_EAPOL_RECVD_EVENT); 6833 C2S(WOW_NLO_DETECTED_EVENT); 6834 C2S(WOW_DISASSOC_RECVD_EVENT); 6835 C2S(WOW_PATTERN_MATCH_EVENT); 6836 C2S(WOW_CSA_IE_EVENT); 6837 C2S(WOW_PROBE_REQ_WPS_IE_EVENT); 6838 C2S(WOW_AUTH_REQ_EVENT); 6839 C2S(WOW_ASSOC_REQ_EVENT); 6840 C2S(WOW_HTT_EVENT); 6841 C2S(WOW_RA_MATCH_EVENT); 6842 C2S(WOW_HOST_AUTO_SHUTDOWN_EVENT); 6843 C2S(WOW_IOAC_MAGIC_EVENT); 6844 C2S(WOW_IOAC_SHORT_EVENT); 6845 C2S(WOW_IOAC_EXTEND_EVENT); 6846 C2S(WOW_IOAC_TIMER_EVENT); 6847 C2S(WOW_DFS_PHYERR_RADAR_EVENT); 6848 C2S(WOW_BEACON_EVENT); 6849 C2S(WOW_CLIENT_KICKOUT_EVENT); 6850 C2S(WOW_EVENT_MAX); 6851 default: 6852 return NULL; 6853 } 6854 } 6855 6856 enum wmi_wow_wake_reason { 6857 WOW_REASON_UNSPECIFIED = -1, 6858 WOW_REASON_NLOD = 0, 6859 WOW_REASON_AP_ASSOC_LOST, 6860 WOW_REASON_LOW_RSSI, 6861 WOW_REASON_DEAUTH_RECVD, 6862 WOW_REASON_DISASSOC_RECVD, 6863 WOW_REASON_GTK_HS_ERR, 6864 WOW_REASON_EAP_REQ, 6865 WOW_REASON_FOURWAY_HS_RECV, 6866 WOW_REASON_TIMER_INTR_RECV, 6867 WOW_REASON_PATTERN_MATCH_FOUND, 6868 WOW_REASON_RECV_MAGIC_PATTERN, 6869 WOW_REASON_P2P_DISC, 6870 WOW_REASON_WLAN_HB, 6871 WOW_REASON_CSA_EVENT, 6872 WOW_REASON_PROBE_REQ_WPS_IE_RECV, 6873 WOW_REASON_AUTH_REQ_RECV, 6874 WOW_REASON_ASSOC_REQ_RECV, 6875 WOW_REASON_HTT_EVENT, 6876 WOW_REASON_RA_MATCH, 6877 WOW_REASON_HOST_AUTO_SHUTDOWN, 6878 WOW_REASON_IOAC_MAGIC_EVENT, 6879 WOW_REASON_IOAC_SHORT_EVENT, 6880 WOW_REASON_IOAC_EXTEND_EVENT, 6881 WOW_REASON_IOAC_TIMER_EVENT, 6882 WOW_REASON_ROAM_HO, 6883 WOW_REASON_DFS_PHYERR_RADADR_EVENT, 6884 WOW_REASON_BEACON_RECV, 6885 WOW_REASON_CLIENT_KICKOUT_EVENT, 6886 WOW_REASON_DEBUG_TEST = 0xFF, 6887 }; 6888 6889 static inline const char *wow_reason(enum wmi_wow_wake_reason reason) 6890 { 6891 switch (reason) { 6892 C2S(WOW_REASON_UNSPECIFIED); 6893 C2S(WOW_REASON_NLOD); 6894 C2S(WOW_REASON_AP_ASSOC_LOST); 6895 C2S(WOW_REASON_LOW_RSSI); 6896 C2S(WOW_REASON_DEAUTH_RECVD); 6897 C2S(WOW_REASON_DISASSOC_RECVD); 6898 C2S(WOW_REASON_GTK_HS_ERR); 6899 C2S(WOW_REASON_EAP_REQ); 6900 C2S(WOW_REASON_FOURWAY_HS_RECV); 6901 C2S(WOW_REASON_TIMER_INTR_RECV); 6902 C2S(WOW_REASON_PATTERN_MATCH_FOUND); 6903 C2S(WOW_REASON_RECV_MAGIC_PATTERN); 6904 C2S(WOW_REASON_P2P_DISC); 6905 C2S(WOW_REASON_WLAN_HB); 6906 C2S(WOW_REASON_CSA_EVENT); 6907 C2S(WOW_REASON_PROBE_REQ_WPS_IE_RECV); 6908 C2S(WOW_REASON_AUTH_REQ_RECV); 6909 C2S(WOW_REASON_ASSOC_REQ_RECV); 6910 C2S(WOW_REASON_HTT_EVENT); 6911 C2S(WOW_REASON_RA_MATCH); 6912 C2S(WOW_REASON_HOST_AUTO_SHUTDOWN); 6913 C2S(WOW_REASON_IOAC_MAGIC_EVENT); 6914 C2S(WOW_REASON_IOAC_SHORT_EVENT); 6915 C2S(WOW_REASON_IOAC_EXTEND_EVENT); 6916 C2S(WOW_REASON_IOAC_TIMER_EVENT); 6917 C2S(WOW_REASON_ROAM_HO); 6918 C2S(WOW_REASON_DFS_PHYERR_RADADR_EVENT); 6919 C2S(WOW_REASON_BEACON_RECV); 6920 C2S(WOW_REASON_CLIENT_KICKOUT_EVENT); 6921 C2S(WOW_REASON_DEBUG_TEST); 6922 default: 6923 return NULL; 6924 } 6925 } 6926 6927 #undef C2S 6928 6929 struct wmi_wow_ev_arg { 6930 u32 vdev_id; 6931 u32 flag; 6932 enum wmi_wow_wake_reason wake_reason; 6933 u32 data_len; 6934 }; 6935 6936 #define WOW_MIN_PATTERN_SIZE 1 6937 #define WOW_MAX_PATTERN_SIZE 148 6938 #define WOW_MAX_PKT_OFFSET 128 6939 #define WOW_HDR_LEN (sizeof(struct ieee80211_hdr_3addr) + \ 6940 sizeof(struct rfc1042_hdr)) 6941 #define WOW_MAX_REDUCE (WOW_HDR_LEN - sizeof(struct ethhdr) - \ 6942 offsetof(struct ieee80211_hdr_3addr, addr1)) 6943 6944 enum wmi_tdls_state { 6945 WMI_TDLS_DISABLE, 6946 WMI_TDLS_ENABLE_PASSIVE, 6947 WMI_TDLS_ENABLE_ACTIVE, 6948 WMI_TDLS_ENABLE_ACTIVE_EXTERNAL_CONTROL, 6949 }; 6950 6951 enum wmi_tdls_peer_state { 6952 WMI_TDLS_PEER_STATE_PEERING, 6953 WMI_TDLS_PEER_STATE_CONNECTED, 6954 WMI_TDLS_PEER_STATE_TEARDOWN, 6955 }; 6956 6957 struct wmi_tdls_peer_update_cmd_arg { 6958 u32 vdev_id; 6959 enum wmi_tdls_peer_state peer_state; 6960 u8 addr[ETH_ALEN]; 6961 }; 6962 6963 #define WMI_TDLS_MAX_SUPP_OPER_CLASSES 32 6964 6965 #define WMI_TDLS_PEER_SP_MASK 0x60 6966 #define WMI_TDLS_PEER_SP_LSB 5 6967 6968 enum wmi_tdls_options { 6969 WMI_TDLS_OFFCHAN_EN = BIT(0), 6970 WMI_TDLS_BUFFER_STA_EN = BIT(1), 6971 WMI_TDLS_SLEEP_STA_EN = BIT(2), 6972 }; 6973 6974 enum { 6975 WMI_TDLS_PEER_QOS_AC_VO = BIT(0), 6976 WMI_TDLS_PEER_QOS_AC_VI = BIT(1), 6977 WMI_TDLS_PEER_QOS_AC_BK = BIT(2), 6978 WMI_TDLS_PEER_QOS_AC_BE = BIT(3), 6979 }; 6980 6981 struct wmi_tdls_peer_capab_arg { 6982 u8 peer_uapsd_queues; 6983 u8 peer_max_sp; 6984 u32 buff_sta_support; 6985 u32 off_chan_support; 6986 u32 peer_curr_operclass; 6987 u32 self_curr_operclass; 6988 u32 peer_chan_len; 6989 u32 peer_operclass_len; 6990 u8 peer_operclass[WMI_TDLS_MAX_SUPP_OPER_CLASSES]; 6991 u32 is_peer_responder; 6992 u32 pref_offchan_num; 6993 u32 pref_offchan_bw; 6994 }; 6995 6996 struct wmi_10_4_tdls_set_state_cmd { 6997 __le32 vdev_id; 6998 __le32 state; 6999 __le32 notification_interval_ms; 7000 __le32 tx_discovery_threshold; 7001 __le32 tx_teardown_threshold; 7002 __le32 rssi_teardown_threshold; 7003 __le32 rssi_delta; 7004 __le32 tdls_options; 7005 __le32 tdls_peer_traffic_ind_window; 7006 __le32 tdls_peer_traffic_response_timeout_ms; 7007 __le32 tdls_puapsd_mask; 7008 __le32 tdls_puapsd_inactivity_time_ms; 7009 __le32 tdls_puapsd_rx_frame_threshold; 7010 __le32 teardown_notification_ms; 7011 __le32 tdls_peer_kickout_threshold; 7012 } __packed; 7013 7014 struct wmi_tdls_peer_capabilities { 7015 __le32 peer_qos; 7016 __le32 buff_sta_support; 7017 __le32 off_chan_support; 7018 __le32 peer_curr_operclass; 7019 __le32 self_curr_operclass; 7020 __le32 peer_chan_len; 7021 __le32 peer_operclass_len; 7022 u8 peer_operclass[WMI_TDLS_MAX_SUPP_OPER_CLASSES]; 7023 __le32 is_peer_responder; 7024 __le32 pref_offchan_num; 7025 __le32 pref_offchan_bw; 7026 struct wmi_channel peer_chan_list[1]; 7027 } __packed; 7028 7029 struct wmi_10_4_tdls_peer_update_cmd { 7030 __le32 vdev_id; 7031 struct wmi_mac_addr peer_macaddr; 7032 __le32 peer_state; 7033 __le32 reserved[4]; 7034 struct wmi_tdls_peer_capabilities peer_capab; 7035 } __packed; 7036 7037 enum wmi_tdls_peer_reason { 7038 WMI_TDLS_TEARDOWN_REASON_TX, 7039 WMI_TDLS_TEARDOWN_REASON_RSSI, 7040 WMI_TDLS_TEARDOWN_REASON_SCAN, 7041 WMI_TDLS_DISCONNECTED_REASON_PEER_DELETE, 7042 WMI_TDLS_TEARDOWN_REASON_PTR_TIMEOUT, 7043 WMI_TDLS_TEARDOWN_REASON_BAD_PTR, 7044 WMI_TDLS_TEARDOWN_REASON_NO_RESPONSE, 7045 WMI_TDLS_ENTER_BUF_STA, 7046 WMI_TDLS_EXIT_BUF_STA, 7047 WMI_TDLS_ENTER_BT_BUSY_MODE, 7048 WMI_TDLS_EXIT_BT_BUSY_MODE, 7049 WMI_TDLS_SCAN_STARTED_EVENT, 7050 WMI_TDLS_SCAN_COMPLETED_EVENT, 7051 }; 7052 7053 enum wmi_tdls_peer_notification { 7054 WMI_TDLS_SHOULD_DISCOVER, 7055 WMI_TDLS_SHOULD_TEARDOWN, 7056 WMI_TDLS_PEER_DISCONNECTED, 7057 WMI_TDLS_CONNECTION_TRACKER_NOTIFICATION, 7058 }; 7059 7060 struct wmi_tdls_peer_event { 7061 struct wmi_mac_addr peer_macaddr; 7062 /* see enum wmi_tdls_peer_notification*/ 7063 __le32 peer_status; 7064 /* see enum wmi_tdls_peer_reason */ 7065 __le32 peer_reason; 7066 __le32 vdev_id; 7067 } __packed; 7068 7069 enum wmi_txbf_conf { 7070 WMI_TXBF_CONF_UNSUPPORTED, 7071 WMI_TXBF_CONF_BEFORE_ASSOC, 7072 WMI_TXBF_CONF_AFTER_ASSOC, 7073 }; 7074 7075 #define WMI_CCA_DETECT_LEVEL_AUTO 0 7076 #define WMI_CCA_DETECT_MARGIN_AUTO 0 7077 7078 struct wmi_pdev_set_adaptive_cca_params { 7079 __le32 enable; 7080 __le32 cca_detect_level; 7081 __le32 cca_detect_margin; 7082 } __packed; 7083 7084 #define WMI_PNO_MAX_SCHED_SCAN_PLANS 2 7085 #define WMI_PNO_MAX_SCHED_SCAN_PLAN_INT 7200 7086 #define WMI_PNO_MAX_SCHED_SCAN_PLAN_ITRNS 100 7087 #define WMI_PNO_MAX_NETW_CHANNELS 26 7088 #define WMI_PNO_MAX_NETW_CHANNELS_EX 60 7089 #define WMI_PNO_MAX_SUPP_NETWORKS WLAN_SCAN_PARAMS_MAX_SSID 7090 #define WMI_PNO_MAX_IE_LENGTH WLAN_SCAN_PARAMS_MAX_IE_LEN 7091 7092 /*size based of dot11 declaration without extra IEs as we will not carry those for PNO*/ 7093 #define WMI_PNO_MAX_PB_REQ_SIZE 450 7094 7095 #define WMI_PNO_24G_DEFAULT_CH 1 7096 #define WMI_PNO_5G_DEFAULT_CH 36 7097 7098 #define WMI_ACTIVE_MAX_CHANNEL_TIME 40 7099 #define WMI_PASSIVE_MAX_CHANNEL_TIME 110 7100 7101 /* SSID broadcast type */ 7102 enum wmi_SSID_bcast_type { 7103 BCAST_UNKNOWN = 0, 7104 BCAST_NORMAL = 1, 7105 BCAST_HIDDEN = 2, 7106 }; 7107 7108 struct wmi_network_type { 7109 struct wmi_ssid ssid; 7110 u32 authentication; 7111 u32 encryption; 7112 u32 bcast_nw_type; 7113 u8 channel_count; 7114 u16 channels[WMI_PNO_MAX_NETW_CHANNELS_EX]; 7115 s32 rssi_threshold; 7116 } __packed; 7117 7118 struct wmi_pno_scan_req { 7119 u8 enable; 7120 u8 vdev_id; 7121 u8 uc_networks_count; 7122 struct wmi_network_type a_networks[WMI_PNO_MAX_SUPP_NETWORKS]; 7123 u32 fast_scan_period; 7124 u32 slow_scan_period; 7125 u8 fast_scan_max_cycles; 7126 7127 bool do_passive_scan; 7128 7129 u32 delay_start_time; 7130 u32 active_min_time; 7131 u32 active_max_time; 7132 u32 passive_min_time; 7133 u32 passive_max_time; 7134 7135 /* mac address randomization attributes */ 7136 u32 enable_pno_scan_randomization; 7137 u8 mac_addr[ETH_ALEN]; 7138 u8 mac_addr_mask[ETH_ALEN]; 7139 } __packed; 7140 7141 enum wmi_host_platform_type { 7142 WMI_HOST_PLATFORM_HIGH_PERF, 7143 WMI_HOST_PLATFORM_LOW_PERF, 7144 }; 7145 7146 enum wmi_bss_survey_req_type { 7147 WMI_BSS_SURVEY_REQ_TYPE_READ = 1, 7148 WMI_BSS_SURVEY_REQ_TYPE_READ_CLEAR, 7149 }; 7150 7151 struct wmi_pdev_chan_info_req_cmd { 7152 __le32 type; 7153 __le32 reserved; 7154 } __packed; 7155 7156 struct ath10k; 7157 struct ath10k_vif; 7158 struct ath10k_fw_stats_pdev; 7159 struct ath10k_fw_stats_peer; 7160 struct ath10k_fw_stats; 7161 7162 int ath10k_wmi_attach(struct ath10k *ar); 7163 void ath10k_wmi_detach(struct ath10k *ar); 7164 void ath10k_wmi_free_host_mem(struct ath10k *ar); 7165 int ath10k_wmi_wait_for_service_ready(struct ath10k *ar); 7166 int ath10k_wmi_wait_for_unified_ready(struct ath10k *ar); 7167 7168 struct sk_buff *ath10k_wmi_alloc_skb(struct ath10k *ar, u32 len); 7169 int ath10k_wmi_connect(struct ath10k *ar); 7170 7171 struct sk_buff *ath10k_wmi_alloc_skb(struct ath10k *ar, u32 len); 7172 int ath10k_wmi_cmd_send(struct ath10k *ar, struct sk_buff *skb, u32 cmd_id); 7173 int ath10k_wmi_cmd_send_nowait(struct ath10k *ar, struct sk_buff *skb, 7174 u32 cmd_id); 7175 void ath10k_wmi_start_scan_init(struct ath10k *ar, struct wmi_start_scan_arg *arg); 7176 7177 void ath10k_wmi_pull_pdev_stats_base(const struct wmi_pdev_stats_base *src, 7178 struct ath10k_fw_stats_pdev *dst); 7179 void ath10k_wmi_pull_pdev_stats_tx(const struct wmi_pdev_stats_tx *src, 7180 struct ath10k_fw_stats_pdev *dst); 7181 void ath10k_wmi_pull_pdev_stats_rx(const struct wmi_pdev_stats_rx *src, 7182 struct ath10k_fw_stats_pdev *dst); 7183 void ath10k_wmi_pull_pdev_stats_extra(const struct wmi_pdev_stats_extra *src, 7184 struct ath10k_fw_stats_pdev *dst); 7185 void ath10k_wmi_pull_peer_stats(const struct wmi_peer_stats *src, 7186 struct ath10k_fw_stats_peer *dst); 7187 void ath10k_wmi_put_host_mem_chunks(struct ath10k *ar, 7188 struct wmi_host_mem_chunks *chunks); 7189 void ath10k_wmi_put_start_scan_common(struct wmi_start_scan_common *cmn, 7190 const struct wmi_start_scan_arg *arg); 7191 void ath10k_wmi_set_wmm_param(struct wmi_wmm_params *params, 7192 const struct wmi_wmm_params_arg *arg); 7193 void ath10k_wmi_put_wmi_channel(struct wmi_channel *ch, 7194 const struct wmi_channel_arg *arg); 7195 int ath10k_wmi_start_scan_verify(const struct wmi_start_scan_arg *arg); 7196 7197 int ath10k_wmi_event_scan(struct ath10k *ar, struct sk_buff *skb); 7198 int ath10k_wmi_event_mgmt_rx(struct ath10k *ar, struct sk_buff *skb); 7199 int ath10k_wmi_event_mgmt_tx_compl(struct ath10k *ar, struct sk_buff *skb); 7200 void ath10k_wmi_event_chan_info(struct ath10k *ar, struct sk_buff *skb); 7201 void ath10k_wmi_event_echo(struct ath10k *ar, struct sk_buff *skb); 7202 int ath10k_wmi_event_debug_mesg(struct ath10k *ar, struct sk_buff *skb); 7203 void ath10k_wmi_event_update_stats(struct ath10k *ar, struct sk_buff *skb); 7204 void ath10k_wmi_event_vdev_start_resp(struct ath10k *ar, struct sk_buff *skb); 7205 void ath10k_wmi_event_vdev_stopped(struct ath10k *ar, struct sk_buff *skb); 7206 void ath10k_wmi_event_peer_sta_kickout(struct ath10k *ar, struct sk_buff *skb); 7207 void ath10k_wmi_event_host_swba(struct ath10k *ar, struct sk_buff *skb); 7208 void ath10k_wmi_event_tbttoffset_update(struct ath10k *ar, struct sk_buff *skb); 7209 void ath10k_wmi_event_dfs(struct ath10k *ar, 7210 struct wmi_phyerr_ev_arg *phyerr, u64 tsf); 7211 void ath10k_wmi_event_spectral_scan(struct ath10k *ar, 7212 struct wmi_phyerr_ev_arg *phyerr, 7213 u64 tsf); 7214 void ath10k_wmi_event_phyerr(struct ath10k *ar, struct sk_buff *skb); 7215 void ath10k_wmi_event_roam(struct ath10k *ar, struct sk_buff *skb); 7216 void ath10k_wmi_event_profile_match(struct ath10k *ar, struct sk_buff *skb); 7217 void ath10k_wmi_event_debug_print(struct ath10k *ar, struct sk_buff *skb); 7218 void ath10k_wmi_event_pdev_qvit(struct ath10k *ar, struct sk_buff *skb); 7219 void ath10k_wmi_event_wlan_profile_data(struct ath10k *ar, struct sk_buff *skb); 7220 void ath10k_wmi_event_rtt_measurement_report(struct ath10k *ar, 7221 struct sk_buff *skb); 7222 void ath10k_wmi_event_tsf_measurement_report(struct ath10k *ar, 7223 struct sk_buff *skb); 7224 void ath10k_wmi_event_rtt_error_report(struct ath10k *ar, struct sk_buff *skb); 7225 void ath10k_wmi_event_wow_wakeup_host(struct ath10k *ar, struct sk_buff *skb); 7226 void ath10k_wmi_event_dcs_interference(struct ath10k *ar, struct sk_buff *skb); 7227 void ath10k_wmi_event_pdev_tpc_config(struct ath10k *ar, struct sk_buff *skb); 7228 void ath10k_wmi_event_pdev_ftm_intg(struct ath10k *ar, struct sk_buff *skb); 7229 void ath10k_wmi_event_gtk_offload_status(struct ath10k *ar, 7230 struct sk_buff *skb); 7231 void ath10k_wmi_event_gtk_rekey_fail(struct ath10k *ar, struct sk_buff *skb); 7232 void ath10k_wmi_event_delba_complete(struct ath10k *ar, struct sk_buff *skb); 7233 void ath10k_wmi_event_addba_complete(struct ath10k *ar, struct sk_buff *skb); 7234 void ath10k_wmi_event_vdev_install_key_complete(struct ath10k *ar, 7235 struct sk_buff *skb); 7236 void ath10k_wmi_event_inst_rssi_stats(struct ath10k *ar, struct sk_buff *skb); 7237 void ath10k_wmi_event_vdev_standby_req(struct ath10k *ar, struct sk_buff *skb); 7238 void ath10k_wmi_event_vdev_resume_req(struct ath10k *ar, struct sk_buff *skb); 7239 void ath10k_wmi_event_service_ready(struct ath10k *ar, struct sk_buff *skb); 7240 int ath10k_wmi_event_ready(struct ath10k *ar, struct sk_buff *skb); 7241 void ath10k_wmi_event_service_available(struct ath10k *ar, struct sk_buff *skb); 7242 int ath10k_wmi_op_pull_phyerr_ev(struct ath10k *ar, const void *phyerr_buf, 7243 int left_len, struct wmi_phyerr_ev_arg *arg); 7244 void ath10k_wmi_main_op_fw_stats_fill(struct ath10k *ar, 7245 struct ath10k_fw_stats *fw_stats, 7246 char *buf); 7247 void ath10k_wmi_10x_op_fw_stats_fill(struct ath10k *ar, 7248 struct ath10k_fw_stats *fw_stats, 7249 char *buf); 7250 size_t ath10k_wmi_fw_stats_num_peers(struct list_head *head); 7251 size_t ath10k_wmi_fw_stats_num_vdevs(struct list_head *head); 7252 void ath10k_wmi_10_4_op_fw_stats_fill(struct ath10k *ar, 7253 struct ath10k_fw_stats *fw_stats, 7254 char *buf); 7255 int ath10k_wmi_op_get_vdev_subtype(struct ath10k *ar, 7256 enum wmi_vdev_subtype subtype); 7257 int ath10k_wmi_barrier(struct ath10k *ar); 7258 void ath10k_wmi_tpc_config_get_rate_code(u8 *rate_code, u16 *pream_table, 7259 u32 num_tx_chain); 7260 void ath10k_wmi_event_tpc_final_table(struct ath10k *ar, struct sk_buff *skb); 7261 7262 #endif /* _WMI_H_ */ 7263