1 // SPDX-License-Identifier: ISC 2 /* 3 * Copyright (c) 2014-2015 Qualcomm Atheros, Inc. 4 */ 5 6 #include <linux/device.h> 7 #include <linux/sysfs.h> 8 #include <linux/thermal.h> 9 #include <linux/hwmon.h> 10 #include <linux/hwmon-sysfs.h> 11 #include "core.h" 12 #include "debug.h" 13 #include "wmi-ops.h" 14 15 static int 16 ath10k_thermal_get_max_throttle_state(struct thermal_cooling_device *cdev, 17 unsigned long *state) 18 { 19 *state = ATH10K_THERMAL_THROTTLE_MAX; 20 21 return 0; 22 } 23 24 static int 25 ath10k_thermal_get_cur_throttle_state(struct thermal_cooling_device *cdev, 26 unsigned long *state) 27 { 28 struct ath10k *ar = cdev->devdata; 29 30 mutex_lock(&ar->conf_mutex); 31 *state = ar->thermal.throttle_state; 32 mutex_unlock(&ar->conf_mutex); 33 34 return 0; 35 } 36 37 static int 38 ath10k_thermal_set_cur_throttle_state(struct thermal_cooling_device *cdev, 39 unsigned long throttle_state) 40 { 41 struct ath10k *ar = cdev->devdata; 42 43 if (throttle_state > ATH10K_THERMAL_THROTTLE_MAX) { 44 ath10k_warn(ar, "throttle state %ld is exceeding the limit %d\n", 45 throttle_state, ATH10K_THERMAL_THROTTLE_MAX); 46 return -EINVAL; 47 } 48 mutex_lock(&ar->conf_mutex); 49 ar->thermal.throttle_state = throttle_state; 50 ath10k_thermal_set_throttling(ar); 51 mutex_unlock(&ar->conf_mutex); 52 return 0; 53 } 54 55 static const struct thermal_cooling_device_ops ath10k_thermal_ops = { 56 .get_max_state = ath10k_thermal_get_max_throttle_state, 57 .get_cur_state = ath10k_thermal_get_cur_throttle_state, 58 .set_cur_state = ath10k_thermal_set_cur_throttle_state, 59 }; 60 61 static ssize_t ath10k_thermal_show_temp(struct device *dev, 62 struct device_attribute *attr, 63 char *buf) 64 { 65 struct ath10k *ar = dev_get_drvdata(dev); 66 int ret, temperature; 67 unsigned long time_left; 68 69 mutex_lock(&ar->conf_mutex); 70 71 /* Can't get temperature when the card is off */ 72 if (ar->state != ATH10K_STATE_ON) { 73 ret = -ENETDOWN; 74 goto out; 75 } 76 77 reinit_completion(&ar->thermal.wmi_sync); 78 ret = ath10k_wmi_pdev_get_temperature(ar); 79 if (ret) { 80 ath10k_warn(ar, "failed to read temperature %d\n", ret); 81 goto out; 82 } 83 84 if (test_bit(ATH10K_FLAG_CRASH_FLUSH, &ar->dev_flags)) { 85 ret = -ESHUTDOWN; 86 goto out; 87 } 88 89 time_left = wait_for_completion_timeout(&ar->thermal.wmi_sync, 90 ATH10K_THERMAL_SYNC_TIMEOUT_HZ); 91 if (!time_left) { 92 ath10k_warn(ar, "failed to synchronize thermal read\n"); 93 ret = -ETIMEDOUT; 94 goto out; 95 } 96 97 spin_lock_bh(&ar->data_lock); 98 temperature = ar->thermal.temperature; 99 spin_unlock_bh(&ar->data_lock); 100 101 /* display in millidegree celcius */ 102 ret = snprintf(buf, PAGE_SIZE, "%d\n", temperature * 1000); 103 out: 104 mutex_unlock(&ar->conf_mutex); 105 return ret; 106 } 107 108 void ath10k_thermal_event_temperature(struct ath10k *ar, int temperature) 109 { 110 spin_lock_bh(&ar->data_lock); 111 ar->thermal.temperature = temperature; 112 spin_unlock_bh(&ar->data_lock); 113 complete(&ar->thermal.wmi_sync); 114 } 115 116 static SENSOR_DEVICE_ATTR(temp1_input, 0444, ath10k_thermal_show_temp, 117 NULL, 0); 118 119 static struct attribute *ath10k_hwmon_attrs[] = { 120 &sensor_dev_attr_temp1_input.dev_attr.attr, 121 NULL, 122 }; 123 ATTRIBUTE_GROUPS(ath10k_hwmon); 124 125 void ath10k_thermal_set_throttling(struct ath10k *ar) 126 { 127 u32 period, duration, enabled; 128 int ret; 129 130 lockdep_assert_held(&ar->conf_mutex); 131 132 if (!test_bit(WMI_SERVICE_THERM_THROT, ar->wmi.svc_map)) 133 return; 134 135 if (!ar->wmi.ops->gen_pdev_set_quiet_mode) 136 return; 137 138 if (ar->state != ATH10K_STATE_ON) 139 return; 140 141 period = ar->thermal.quiet_period; 142 duration = (period * ar->thermal.throttle_state) / 100; 143 enabled = duration ? 1 : 0; 144 145 ret = ath10k_wmi_pdev_set_quiet_mode(ar, period, duration, 146 ATH10K_QUIET_START_OFFSET, 147 enabled); 148 if (ret) { 149 ath10k_warn(ar, "failed to set quiet mode period %u duarion %u enabled %u ret %d\n", 150 period, duration, enabled, ret); 151 } 152 } 153 154 int ath10k_thermal_register(struct ath10k *ar) 155 { 156 struct thermal_cooling_device *cdev; 157 struct device *hwmon_dev; 158 int ret; 159 160 if (!test_bit(WMI_SERVICE_THERM_THROT, ar->wmi.svc_map)) 161 return 0; 162 163 cdev = thermal_cooling_device_register("ath10k_thermal", ar, 164 &ath10k_thermal_ops); 165 166 if (IS_ERR(cdev)) { 167 ath10k_err(ar, "failed to setup thermal device result: %ld\n", 168 PTR_ERR(cdev)); 169 return -EINVAL; 170 } 171 172 ret = sysfs_create_link(&ar->dev->kobj, &cdev->device.kobj, 173 "cooling_device"); 174 if (ret) { 175 ath10k_err(ar, "failed to create cooling device symlink\n"); 176 goto err_cooling_destroy; 177 } 178 179 ar->thermal.cdev = cdev; 180 ar->thermal.quiet_period = ATH10K_QUIET_PERIOD_DEFAULT; 181 182 /* Do not register hwmon device when temperature reading is not 183 * supported by firmware 184 */ 185 if (!(ar->wmi.ops->gen_pdev_get_temperature)) 186 return 0; 187 188 /* Avoid linking error on devm_hwmon_device_register_with_groups, I 189 * guess linux/hwmon.h is missing proper stubs. 190 */ 191 if (!IS_REACHABLE(CONFIG_HWMON)) 192 return 0; 193 194 hwmon_dev = devm_hwmon_device_register_with_groups(ar->dev, 195 "ath10k_hwmon", ar, 196 ath10k_hwmon_groups); 197 if (IS_ERR(hwmon_dev)) { 198 ath10k_err(ar, "failed to register hwmon device: %ld\n", 199 PTR_ERR(hwmon_dev)); 200 ret = -EINVAL; 201 goto err_remove_link; 202 } 203 return 0; 204 205 err_remove_link: 206 sysfs_remove_link(&ar->dev->kobj, "cooling_device"); 207 err_cooling_destroy: 208 thermal_cooling_device_unregister(cdev); 209 return ret; 210 } 211 212 void ath10k_thermal_unregister(struct ath10k *ar) 213 { 214 if (!test_bit(WMI_SERVICE_THERM_THROT, ar->wmi.svc_map)) 215 return; 216 217 sysfs_remove_link(&ar->dev->kobj, "cooling_device"); 218 thermal_cooling_device_unregister(ar->thermal.cdev); 219 } 220