1# 2# Wireless LAN device configuration 3# 4 5menu "Wireless LAN" 6 depends on !S390 7 8config WLAN_PRE80211 9 bool "Wireless LAN (pre-802.11)" 10 depends on NETDEVICES 11 ---help--- 12 Say Y if you have any pre-802.11 wireless LAN hardware. 13 14 This option does not affect the kernel build, it only 15 lets you choose drivers. 16 17config STRIP 18 tristate "STRIP (Metricom starmode radio IP)" 19 depends on INET && WLAN_PRE80211 20 select WIRELESS_EXT 21 ---help--- 22 Say Y if you have a Metricom radio and intend to use Starmode Radio 23 IP. STRIP is a radio protocol developed for the MosquitoNet project 24 (on the WWW at <http://mosquitonet.stanford.edu/>) to send Internet 25 traffic using Metricom radios. Metricom radios are small, battery 26 powered, 100kbit/sec packet radio transceivers, about the size and 27 weight of a cellular telephone. (You may also have heard them called 28 "Metricom modems" but we avoid the term "modem" because it misleads 29 many people into thinking that you can plug a Metricom modem into a 30 phone line and use it as a modem.) 31 32 You can use STRIP on any Linux machine with a serial port, although 33 it is obviously most useful for people with laptop computers. If you 34 think you might get a Metricom radio in the future, there is no harm 35 in saying Y to STRIP now, except that it makes the kernel a bit 36 bigger. 37 38 To compile this as a module, choose M here: the module will be 39 called strip. 40 41config ARLAN 42 tristate "Aironet Arlan 655 & IC2200 DS support" 43 depends on ISA && !64BIT && WLAN_PRE80211 44 select WIRELESS_EXT 45 ---help--- 46 Aironet makes Arlan, a class of wireless LAN adapters. These use the 47 www.Telxon.com chip, which is also used on several similar cards. 48 This driver is tested on the 655 and IC2200 series cards. Look at 49 <http://www.ylenurme.ee/~elmer/655/> for the latest information. 50 51 The driver is built as two modules, arlan and arlan-proc. The latter 52 is the /proc interface and is not needed most of time. 53 54 On some computers the card ends up in non-valid state after some 55 time. Use a ping-reset script to clear it. 56 57config WAVELAN 58 tristate "AT&T/Lucent old WaveLAN & DEC RoamAbout DS ISA support" 59 depends on ISA && WLAN_PRE80211 60 select WIRELESS_EXT 61 ---help--- 62 The Lucent WaveLAN (formerly NCR and AT&T; or DEC RoamAbout DS) is 63 a Radio LAN (wireless Ethernet-like Local Area Network) using the 64 radio frequencies 900 MHz and 2.4 GHz. 65 66 This driver support the ISA version of the WaveLAN card. A separate 67 driver for the PCMCIA (PC-card) hardware is available in David 68 Hinds' pcmcia-cs package (see the file <file:Documentation/Changes> 69 for location). 70 71 If you want to use an ISA WaveLAN card under Linux, say Y and read 72 the Ethernet-HOWTO, available from 73 <http://www.tldp.org/docs.html#howto>. Some more specific 74 information is contained in 75 <file:Documentation/networking/wavelan.txt> and in the source code 76 <file:drivers/net/wavelan.p.h>. 77 78 You will also need the wireless tools package available from 79 <http://www.hpl.hp.com/personal/Jean_Tourrilhes/Linux/Tools.html>. 80 Please read the man pages contained therein. 81 82 To compile this driver as a module, choose M here: the module will be 83 called wavelan. 84 85config PCMCIA_WAVELAN 86 tristate "AT&T/Lucent old WaveLAN Pcmcia wireless support" 87 depends on PCMCIA && WLAN_PRE80211 88 select WIRELESS_EXT 89 help 90 Say Y here if you intend to attach an AT&T/Lucent Wavelan PCMCIA 91 (PC-card) wireless Ethernet networking card to your computer. This 92 driver is for the non-IEEE-802.11 Wavelan cards. 93 94 To compile this driver as a module, choose M here: the module will be 95 called wavelan_cs. If unsure, say N. 96 97config PCMCIA_NETWAVE 98 tristate "Xircom Netwave AirSurfer Pcmcia wireless support" 99 depends on PCMCIA && WLAN_PRE80211 100 select WIRELESS_EXT 101 help 102 Say Y here if you intend to attach this type of PCMCIA (PC-card) 103 wireless Ethernet networking card to your computer. 104 105 To compile this driver as a module, choose M here: the module will be 106 called netwave_cs. If unsure, say N. 107 108 109config WLAN_80211 110 bool "Wireless LAN (IEEE 802.11)" 111 depends on NETDEVICES 112 ---help--- 113 Say Y if you have any 802.11 wireless LAN hardware. 114 115 This option does not affect the kernel build, it only 116 lets you choose drivers. 117 118config PCMCIA_RAYCS 119 tristate "Aviator/Raytheon 2.4MHz wireless support" 120 depends on PCMCIA && WLAN_80211 121 select WIRELESS_EXT 122 ---help--- 123 Say Y here if you intend to attach an Aviator/Raytheon PCMCIA 124 (PC-card) wireless Ethernet networking card to your computer. 125 Please read the file <file:Documentation/networking/ray_cs.txt> for 126 details. 127 128 To compile this driver as a module, choose M here: the module will be 129 called ray_cs. If unsure, say N. 130 131config IPW2100 132 tristate "Intel PRO/Wireless 2100 Network Connection" 133 depends on PCI && WLAN_80211 134 select WIRELESS_EXT 135 select FW_LOADER 136 select IEEE80211 137 ---help--- 138 A driver for the Intel PRO/Wireless 2100 Network 139 Connection 802.11b wireless network adapter. 140 141 See <file:Documentation/networking/README.ipw2100> for information on 142 the capabilities currently enabled in this driver and for tips 143 for debugging issues and problems. 144 145 In order to use this driver, you will need a firmware image for it. 146 You can obtain the firmware from 147 <http://ipw2100.sf.net/>. Once you have the firmware image, you 148 will need to place it in /lib/firmware. 149 150 You will also very likely need the Wireless Tools in order to 151 configure your card: 152 153 <http://www.hpl.hp.com/personal/Jean_Tourrilhes/Linux/Tools.html>. 154 155 If you want to compile the driver as a module ( = code which can be 156 inserted in and removed from the running kernel whenever you want), 157 say M here and read <file:Documentation/kbuild/modules.txt>. 158 The module will be called ipw2100.ko. 159 160config IPW2100_MONITOR 161 bool "Enable promiscuous mode" 162 depends on IPW2100 163 ---help--- 164 Enables promiscuous/monitor mode support for the ipw2100 driver. 165 With this feature compiled into the driver, you can switch to 166 promiscuous mode via the Wireless Tool's Monitor mode. While in this 167 mode, no packets can be sent. 168 169config IPW2100_DEBUG 170 bool "Enable full debugging output in IPW2100 module." 171 depends on IPW2100 172 ---help--- 173 This option will enable debug tracing output for the IPW2100. 174 175 This will result in the kernel module being ~60k larger. You can 176 control which debug output is sent to the kernel log by setting the 177 value in 178 179 /sys/bus/pci/drivers/ipw2100/debug_level 180 181 This entry will only exist if this option is enabled. 182 183 If you are not trying to debug or develop the IPW2100 driver, you 184 most likely want to say N here. 185 186config IPW2200 187 tristate "Intel PRO/Wireless 2200BG and 2915ABG Network Connection" 188 depends on PCI && WLAN_80211 189 select WIRELESS_EXT 190 select FW_LOADER 191 select IEEE80211 192 ---help--- 193 A driver for the Intel PRO/Wireless 2200BG and 2915ABG Network 194 Connection adapters. 195 196 See <file:Documentation/networking/README.ipw2200> for 197 information on the capabilities currently enabled in this 198 driver and for tips for debugging issues and problems. 199 200 In order to use this driver, you will need a firmware image for it. 201 You can obtain the firmware from 202 <http://ipw2200.sf.net/>. See the above referenced README.ipw2200 203 for information on where to install the firmware images. 204 205 You will also very likely need the Wireless Tools in order to 206 configure your card: 207 208 <http://www.hpl.hp.com/personal/Jean_Tourrilhes/Linux/Tools.html>. 209 210 If you want to compile the driver as a module ( = code which can be 211 inserted in and removed from the running kernel whenever you want), 212 say M here and read <file:Documentation/kbuild/modules.txt>. 213 The module will be called ipw2200.ko. 214 215config IPW2200_MONITOR 216 bool "Enable promiscuous mode" 217 depends on IPW2200 218 ---help--- 219 Enables promiscuous/monitor mode support for the ipw2200 driver. 220 With this feature compiled into the driver, you can switch to 221 promiscuous mode via the Wireless Tool's Monitor mode. While in this 222 mode, no packets can be sent. 223 224config IPW2200_RADIOTAP 225 bool "Enable radiotap format 802.11 raw packet support" 226 depends on IPW2200_MONITOR 227 228config IPW2200_PROMISCUOUS 229 bool "Enable creation of a RF radiotap promiscuous interface" 230 depends on IPW2200_MONITOR 231 select IPW2200_RADIOTAP 232 ---help--- 233 Enables the creation of a second interface prefixed 'rtap'. 234 This second interface will provide every received in radiotap 235 format. 236 237 This is useful for performing wireless network analysis while 238 maintaining an active association. 239 240 Example usage: 241 242 % modprobe ipw2200 rtap_iface=1 243 % ifconfig rtap0 up 244 % tethereal -i rtap0 245 246 If you do not specify 'rtap_iface=1' as a module parameter then 247 the rtap interface will not be created and you will need to turn 248 it on via sysfs: 249 250 % echo 1 > /sys/bus/pci/drivers/ipw2200/*/rtap_iface 251 252config IPW2200_QOS 253 bool "Enable QoS support" 254 depends on IPW2200 && EXPERIMENTAL 255 256config IPW2200_DEBUG 257 bool "Enable full debugging output in IPW2200 module." 258 depends on IPW2200 259 ---help--- 260 This option will enable low level debug tracing output for IPW2200. 261 262 Note, normal debug code is already compiled in. This low level 263 debug option enables debug on hot paths (e.g Tx, Rx, ISR) and 264 will result in the kernel module being ~70 larger. Most users 265 will typically not need this high verbosity debug information. 266 267 If you are not sure, say N here. 268 269config LIBERTAS_USB 270 tristate "Marvell Libertas 8388 802.11a/b/g cards" 271 depends on USB && WLAN_80211 272 select FW_LOADER 273 ---help--- 274 A driver for Marvell Libertas 8388 USB devices. 275 276config LIBERTAS_USB_DEBUG 277 bool "Enable full debugging output in the Libertas USB module." 278 depends on LIBERTAS_USB 279 ---help--- 280 Debugging support. 281 282config AIRO 283 tristate "Cisco/Aironet 34X/35X/4500/4800 ISA and PCI cards" 284 depends on ISA_DMA_API && WLAN_80211 && (PCI || BROKEN) 285 select WIRELESS_EXT 286 select CRYPTO 287 ---help--- 288 This is the standard Linux driver to support Cisco/Aironet ISA and 289 PCI 802.11 wireless cards. 290 It supports the new 802.11b cards from Cisco (Cisco 34X, Cisco 35X 291 - with or without encryption) as well as card before the Cisco 292 acquisition (Aironet 4500, Aironet 4800, Aironet 4800B). 293 294 This driver support both the standard Linux Wireless Extensions 295 and Cisco proprietary API, so both the Linux Wireless Tools and the 296 Cisco Linux utilities can be used to configure the card. 297 298 The driver can be compiled as a module and will be named "airo". 299 300config HERMES 301 tristate "Hermes chipset 802.11b support (Orinoco/Prism2/Symbol)" 302 depends on (PPC_PMAC || PCI || PCMCIA) && WLAN_80211 303 select WIRELESS_EXT 304 ---help--- 305 A driver for 802.11b wireless cards based on the "Hermes" or 306 Intersil HFA384x (Prism 2) MAC controller. This includes the vast 307 majority of the PCMCIA 802.11b cards (which are nearly all rebadges) 308 - except for the Cisco/Aironet cards. Cards supported include the 309 Apple Airport (not a PCMCIA card), WavelanIEEE/Orinoco, 310 Cabletron/EnteraSys Roamabout, ELSA AirLancer, MELCO Buffalo, Avaya, 311 IBM High Rate Wireless, Farralon Syyline, Samsung MagicLAN, Netgear 312 MA401, LinkSys WPC-11, D-Link DWL-650, 3Com AirConnect, Intel 313 PRO/Wireless, and Symbol Spectrum24 High Rate amongst others. 314 315 This option includes the guts of the driver, but in order to 316 actually use a card you will also need to enable support for PCMCIA 317 Hermes cards, PLX9052 based PCI adaptors or the Apple Airport below. 318 319 You will also very likely also need the Wireless Tools in order to 320 configure your card and that /etc/pcmcia/wireless.opts works : 321 <http://www.hpl.hp.com/personal/Jean_Tourrilhes/Linux/Tools.html> 322 323config APPLE_AIRPORT 324 tristate "Apple Airport support (built-in)" 325 depends on PPC_PMAC && HERMES 326 help 327 Say Y here to support the Airport 802.11b wireless Ethernet hardware 328 built into the Macintosh iBook and other recent PowerPC-based 329 Macintosh machines. This is essentially a Lucent Orinoco card with 330 a non-standard interface. 331 332 This driver does not support the Airport Extreme (802.11b/g). Use 333 the BCM43xx driver for Airport Extreme cards. 334 335config PLX_HERMES 336 tristate "Hermes in PLX9052 based PCI adaptor support (Netgear MA301 etc.)" 337 depends on PCI && HERMES 338 help 339 Enable support for PCMCIA cards supported by the "Hermes" (aka 340 orinoco) driver when used in PLX9052 based PCI adaptors. These 341 adaptors are not a full PCMCIA controller but act as a more limited 342 PCI <-> PCMCIA bridge. Several vendors sell such adaptors so that 343 802.11b PCMCIA cards can be used in desktop machines. The Netgear 344 MA301 is such an adaptor. 345 346config TMD_HERMES 347 tristate "Hermes in TMD7160 based PCI adaptor support" 348 depends on PCI && HERMES 349 help 350 Enable support for PCMCIA cards supported by the "Hermes" (aka 351 orinoco) driver when used in TMD7160 based PCI adaptors. These 352 adaptors are not a full PCMCIA controller but act as a more limited 353 PCI <-> PCMCIA bridge. Several vendors sell such adaptors so that 354 802.11b PCMCIA cards can be used in desktop machines. 355 356config NORTEL_HERMES 357 tristate "Nortel emobility PCI adaptor support" 358 depends on PCI && HERMES 359 help 360 Enable support for PCMCIA cards supported by the "Hermes" (aka 361 orinoco) driver when used in Nortel emobility PCI adaptors. These 362 adaptors are not full PCMCIA controllers, but act as a more limited 363 PCI <-> PCMCIA bridge. 364 365config PCI_HERMES 366 tristate "Prism 2.5 PCI 802.11b adaptor support" 367 depends on PCI && HERMES 368 help 369 Enable support for PCI and mini-PCI 802.11b wireless NICs based on 370 the Prism 2.5 chipset. These are true PCI cards, not the 802.11b 371 PCMCIA cards bundled with PCI<->PCMCIA adaptors which are also 372 common. Some of the built-in wireless adaptors in laptops are of 373 this variety. 374 375config ATMEL 376 tristate "Atmel at76c50x chipset 802.11b support" 377 depends on (PCI || PCMCIA) && WLAN_80211 378 select WIRELESS_EXT 379 select FW_LOADER 380 select CRC32 381 ---help--- 382 A driver 802.11b wireless cards based on the Atmel fast-vnet 383 chips. This driver supports standard Linux wireless extensions. 384 385 Many cards based on this chipset do not have flash memory 386 and need their firmware loaded at start-up. If yours is 387 one of these, you will need to provide a firmware image 388 to be loaded into the card by the driver. The Atmel 389 firmware package can be downloaded from 390 <http://www.thekelleys.org.uk/atmel> 391 392config PCI_ATMEL 393 tristate "Atmel at76c506 PCI cards" 394 depends on ATMEL && PCI 395 ---help--- 396 Enable support for PCI and mini-PCI cards containing the 397 Atmel at76c506 chip. 398 399config PCMCIA_HERMES 400 tristate "Hermes PCMCIA card support" 401 depends on PCMCIA && HERMES 402 ---help--- 403 A driver for "Hermes" chipset based PCMCIA wireless adaptors, such 404 as the Lucent WavelanIEEE/Orinoco cards and their OEM (Cabletron/ 405 EnteraSys RoamAbout 802.11, ELSA Airlancer, Melco Buffalo and 406 others). It should also be usable on various Prism II based cards 407 such as the Linksys, D-Link and Farallon Skyline. It should also 408 work on Symbol cards such as the 3Com AirConnect and Ericsson WLAN. 409 410 To use your PC-cards, you will need supporting software from David 411 Hinds' pcmcia-cs package (see the file <file:Documentation/Changes> 412 for location). You also want to check out the PCMCIA-HOWTO, 413 available from <http://www.tldp.org/docs.html#howto>. 414 415 You will also very likely also need the Wireless Tools in order to 416 configure your card and that /etc/pcmcia/wireless.opts works: 417 <http://www.hpl.hp.com/personal/Jean_Tourrilhes/Linux/Tools.html>. 418 419config PCMCIA_SPECTRUM 420 tristate "Symbol Spectrum24 Trilogy PCMCIA card support" 421 depends on PCMCIA && HERMES 422 select FW_LOADER 423 ---help--- 424 425 This is a driver for 802.11b cards using RAM-loadable Symbol 426 firmware, such as Symbol Wireless Networker LA4100, CompactFlash 427 cards by Socket Communications and Intel PRO/Wireless 2011B. 428 429 This driver requires firmware download on startup. Utilities 430 for downloading Symbol firmware are available at 431 <http://sourceforge.net/projects/orinoco/> 432 433config AIRO_CS 434 tristate "Cisco/Aironet 34X/35X/4500/4800 PCMCIA cards" 435 depends on PCMCIA && (BROKEN || !M32R) && WLAN_80211 436 select WIRELESS_EXT 437 select CRYPTO 438 select CRYPTO_AES 439 ---help--- 440 This is the standard Linux driver to support Cisco/Aironet PCMCIA 441 802.11 wireless cards. This driver is the same as the Aironet 442 driver part of the Linux Pcmcia package. 443 It supports the new 802.11b cards from Cisco (Cisco 34X, Cisco 35X 444 - with or without encryption) as well as card before the Cisco 445 acquisition (Aironet 4500, Aironet 4800, Aironet 4800B). It also 446 supports OEM of Cisco such as the DELL TrueMobile 4800 and Xircom 447 802.11b cards. 448 449 This driver support both the standard Linux Wireless Extensions 450 and Cisco proprietary API, so both the Linux Wireless Tools and the 451 Cisco Linux utilities can be used to configure the card. 452 453 To use your PC-cards, you will need supporting software from David 454 Hinds' pcmcia-cs package (see the file <file:Documentation/Changes> 455 for location). You also want to check out the PCMCIA-HOWTO, 456 available from <http://www.tldp.org/docs.html#howto>. 457 458config PCMCIA_ATMEL 459 tristate "Atmel at76c502/at76c504 PCMCIA cards" 460 depends on ATMEL && PCMCIA 461 select WIRELESS_EXT 462 select FW_LOADER 463 select CRC32 464 ---help--- 465 Enable support for PCMCIA cards containing the 466 Atmel at76c502 and at76c504 chips. 467 468config PCMCIA_WL3501 469 tristate "Planet WL3501 PCMCIA cards" 470 depends on EXPERIMENTAL && PCMCIA && WLAN_80211 471 select WIRELESS_EXT 472 ---help--- 473 A driver for WL3501 PCMCIA 802.11 wireless cards made by Planet. 474 It has basic support for Linux wireless extensions and initial 475 micro support for ethtool. 476 477config PRISM54 478 tristate 'Intersil Prism GT/Duette/Indigo PCI/Cardbus' 479 depends on PCI && EXPERIMENTAL && WLAN_80211 480 select WIRELESS_EXT 481 select FW_LOADER 482 ---help--- 483 Enable PCI and Cardbus support for the following chipset based cards: 484 485 ISL3880 - Prism GT 802.11 b/g 486 ISL3877 - Prism Indigo 802.11 a 487 ISL3890 - Prism Duette 802.11 a/b/g 488 489 For a complete list of supported cards visit <http://prism54.org>. 490 Here is the latest confirmed list of supported cards: 491 492 3com OfficeConnect 11g Cardbus Card aka 3CRWE154G72 (version 1) 493 Allnet ALL0271 PCI Card 494 Compex WL54G Cardbus Card 495 Corega CG-WLCB54GT Cardbus Card 496 D-Link Air Plus Xtreme G A1 Cardbus Card aka DWL-g650 497 I-O Data WN-G54/CB Cardbus Card 498 Kobishi XG-300 aka Z-Com Cardbus Card 499 Netgear WG511 Cardbus Card 500 Ovislink WL-5400PCI PCI Card 501 Peabird WLG-PCI PCI Card 502 Sitecom WL-100i Cardbus Card 503 Sitecom WL-110i PCI Card 504 SMC2802W - EZ Connect g 2.4GHz 54 Mbps Wireless PCI Card 505 SMC2835W - EZ Connect g 2.4GHz 54 Mbps Wireless Cardbus Card 506 SMC2835W-V2 - EZ Connect g 2.4GHz 54 Mbps Wireless Cardbus Card 507 Z-Com XG-900 PCI Card 508 Zyxel G-100 Cardbus Card 509 510 If you enable this you will need a firmware file as well. 511 You will need to copy this to /usr/lib/hotplug/firmware/isl3890. 512 You can get this non-GPL'd firmware file from the Prism54 project page: 513 <http://prism54.org> 514 You will also need the /etc/hotplug/firmware.agent script from 515 a current hotplug package. 516 517 Note: You need a motherboard with DMA support to use any of these cards 518 519 If you want to compile the driver as a module ( = code which can be 520 inserted in and removed from the running kernel whenever you want), 521 say M here and read <file:Documentation/kbuild/modules.txt>. 522 The module will be called prism54.ko. 523 524config USB_ZD1201 525 tristate "USB ZD1201 based Wireless device support" 526 depends on USB && WLAN_80211 527 select WIRELESS_EXT 528 select FW_LOADER 529 ---help--- 530 Say Y if you want to use wireless LAN adapters based on the ZyDAS 531 ZD1201 chip. 532 533 This driver makes the adapter appear as a normal Ethernet interface, 534 typically on wlan0. 535 536 The zd1201 device requires external firmware to be loaded. 537 This can be found at http://linux-lc100020.sourceforge.net/ 538 539 To compile this driver as a module, choose M here: the 540 module will be called zd1201. 541 542source "drivers/net/wireless/hostap/Kconfig" 543source "drivers/net/wireless/bcm43xx/Kconfig" 544source "drivers/net/wireless/zd1211rw/Kconfig" 545 546endmenu 547