1# 2# Wireless LAN device configuration 3# 4 5menuconfig WLAN 6 bool "Wireless LAN" 7 depends on !S390 8 depends on NET 9 select WIRELESS 10 default y 11 ---help--- 12 This section contains all the pre 802.11 and 802.11 wireless 13 device drivers. For a complete list of drivers and documentation 14 on them refer to the wireless wiki: 15 16 http://wireless.kernel.org/en/users/Drivers 17 18if WLAN 19 20config PCMCIA_RAYCS 21 tristate "Aviator/Raytheon 2.4GHz wireless support" 22 depends on PCMCIA 23 select WIRELESS_EXT 24 select WEXT_SPY 25 select WEXT_PRIV 26 ---help--- 27 Say Y here if you intend to attach an Aviator/Raytheon PCMCIA 28 (PC-card) wireless Ethernet networking card to your computer. 29 Please read the file <file:Documentation/networking/ray_cs.txt> for 30 details. 31 32 To compile this driver as a module, choose M here: the module will be 33 called ray_cs. If unsure, say N. 34 35config LIBERTAS_THINFIRM 36 tristate "Marvell 8xxx Libertas WLAN driver support with thin firmware" 37 depends on MAC80211 38 select FW_LOADER 39 ---help--- 40 A library for Marvell Libertas 8xxx devices using thinfirm. 41 42config LIBERTAS_THINFIRM_DEBUG 43 bool "Enable full debugging output in the Libertas thin firmware module." 44 depends on LIBERTAS_THINFIRM 45 ---help--- 46 Debugging support. 47 48config LIBERTAS_THINFIRM_USB 49 tristate "Marvell Libertas 8388 USB 802.11b/g cards with thin firmware" 50 depends on LIBERTAS_THINFIRM && USB 51 ---help--- 52 A driver for Marvell Libertas 8388 USB devices using thinfirm. 53 54config AIRO 55 tristate "Cisco/Aironet 34X/35X/4500/4800 ISA and PCI cards" 56 depends on ISA_DMA_API && (PCI || BROKEN) 57 select WIRELESS_EXT 58 select CRYPTO 59 select WEXT_SPY 60 select WEXT_PRIV 61 ---help--- 62 This is the standard Linux driver to support Cisco/Aironet ISA and 63 PCI 802.11 wireless cards. 64 It supports the new 802.11b cards from Cisco (Cisco 34X, Cisco 35X 65 - with or without encryption) as well as card before the Cisco 66 acquisition (Aironet 4500, Aironet 4800, Aironet 4800B). 67 68 This driver support both the standard Linux Wireless Extensions 69 and Cisco proprietary API, so both the Linux Wireless Tools and the 70 Cisco Linux utilities can be used to configure the card. 71 72 The driver can be compiled as a module and will be named "airo". 73 74config ATMEL 75 tristate "Atmel at76c50x chipset 802.11b support" 76 depends on (PCI || PCMCIA) 77 select WIRELESS_EXT 78 select WEXT_PRIV 79 select FW_LOADER 80 select CRC32 81 ---help--- 82 A driver 802.11b wireless cards based on the Atmel fast-vnet 83 chips. This driver supports standard Linux wireless extensions. 84 85 Many cards based on this chipset do not have flash memory 86 and need their firmware loaded at start-up. If yours is 87 one of these, you will need to provide a firmware image 88 to be loaded into the card by the driver. The Atmel 89 firmware package can be downloaded from 90 <http://www.thekelleys.org.uk/atmel> 91 92config PCI_ATMEL 93 tristate "Atmel at76c506 PCI cards" 94 depends on ATMEL && PCI 95 ---help--- 96 Enable support for PCI and mini-PCI cards containing the 97 Atmel at76c506 chip. 98 99config PCMCIA_ATMEL 100 tristate "Atmel at76c502/at76c504 PCMCIA cards" 101 depends on ATMEL && PCMCIA 102 select WIRELESS_EXT 103 select FW_LOADER 104 select CRC32 105 ---help--- 106 Enable support for PCMCIA cards containing the 107 Atmel at76c502 and at76c504 chips. 108 109config AT76C50X_USB 110 tristate "Atmel at76c503/at76c505/at76c505a USB cards" 111 depends on MAC80211 && USB 112 select FW_LOADER 113 ---help--- 114 Enable support for USB Wireless devices using Atmel at76c503, 115 at76c505 or at76c505a chips. 116 117config AIRO_CS 118 tristate "Cisco/Aironet 34X/35X/4500/4800 PCMCIA cards" 119 depends on PCMCIA && (BROKEN || !M32R) 120 select WIRELESS_EXT 121 select WEXT_SPY 122 select WEXT_PRIV 123 select CRYPTO 124 select CRYPTO_AES 125 ---help--- 126 This is the standard Linux driver to support Cisco/Aironet PCMCIA 127 802.11 wireless cards. This driver is the same as the Aironet 128 driver part of the Linux Pcmcia package. 129 It supports the new 802.11b cards from Cisco (Cisco 34X, Cisco 35X 130 - with or without encryption) as well as card before the Cisco 131 acquisition (Aironet 4500, Aironet 4800, Aironet 4800B). It also 132 supports OEM of Cisco such as the DELL TrueMobile 4800 and Xircom 133 802.11b cards. 134 135 This driver support both the standard Linux Wireless Extensions 136 and Cisco proprietary API, so both the Linux Wireless Tools and the 137 Cisco Linux utilities can be used to configure the card. 138 139config PCMCIA_WL3501 140 tristate "Planet WL3501 PCMCIA cards" 141 depends on EXPERIMENTAL && PCMCIA 142 select WIRELESS_EXT 143 select WEXT_SPY 144 help 145 A driver for WL3501 PCMCIA 802.11 wireless cards made by Planet. 146 It has basic support for Linux wireless extensions and initial 147 micro support for ethtool. 148 149config PRISM54 150 tristate 'Intersil Prism GT/Duette/Indigo PCI/Cardbus (DEPRECATED)' 151 depends on PCI && EXPERIMENTAL 152 select WIRELESS_EXT 153 select WEXT_SPY 154 select WEXT_PRIV 155 select FW_LOADER 156 ---help--- 157 This enables support for FullMAC PCI/Cardbus prism54 devices. This 158 driver is now deprecated in favor for the SoftMAC driver, p54pci. 159 p54pci supports FullMAC PCI/Cardbus devices as well. 160 161 For more information refer to the p54 wiki: 162 163 http://wireless.kernel.org/en/users/Drivers/p54 164 165 Note: You need a motherboard with DMA support to use any of these cards 166 167 When built as module you get the module prism54 168 169config USB_ZD1201 170 tristate "USB ZD1201 based Wireless device support" 171 depends on USB 172 select WIRELESS_EXT 173 select WEXT_PRIV 174 select FW_LOADER 175 ---help--- 176 Say Y if you want to use wireless LAN adapters based on the ZyDAS 177 ZD1201 chip. 178 179 This driver makes the adapter appear as a normal Ethernet interface, 180 typically on wlan0. 181 182 The zd1201 device requires external firmware to be loaded. 183 This can be found at http://linux-lc100020.sourceforge.net/ 184 185 To compile this driver as a module, choose M here: the 186 module will be called zd1201. 187 188config USB_NET_RNDIS_WLAN 189 tristate "Wireless RNDIS USB support" 190 depends on USB && EXPERIMENTAL 191 depends on CFG80211 192 select USB_USBNET 193 select USB_NET_CDCETHER 194 select USB_NET_RNDIS_HOST 195 ---help--- 196 This is a driver for wireless RNDIS devices. 197 These are USB based adapters found in devices such as: 198 199 Buffalo WLI-U2-KG125S 200 U.S. Robotics USR5421 201 Belkin F5D7051 202 Linksys WUSB54GSv2 203 Linksys WUSB54GSC 204 Asus WL169gE 205 Eminent EM4045 206 BT Voyager 1055 207 Linksys WUSB54GSv1 208 U.S. Robotics USR5420 209 BUFFALO WLI-USB-G54 210 211 All of these devices are based on Broadcom 4320 chip which is the 212 only wireless RNDIS chip known to date. 213 214 If you choose to build a module, it'll be called rndis_wlan. 215 216source "drivers/net/wireless/rtl818x/Kconfig" 217 218config ADM8211 219 tristate "ADMtek ADM8211 support" 220 depends on MAC80211 && PCI && EXPERIMENTAL 221 select CRC32 222 select EEPROM_93CX6 223 ---help--- 224 This driver is for ADM8211A, ADM8211B, and ADM8211C based cards. 225 These are PCI/mini-PCI/Cardbus 802.11b chips found in cards such as: 226 227 Xterasys Cardbus XN-2411b 228 Blitz NetWave Point PC 229 TrendNet 221pc 230 Belkin F5D6001 231 SMC 2635W 232 Linksys WPC11 v1 233 Fiberline FL-WL-200X 234 3com Office Connect (3CRSHPW796) 235 Corega WLPCIB-11 236 SMC 2602W V2 EU 237 D-Link DWL-520 Revision C 238 239 However, some of these cards have been replaced with other chips 240 like the RTL8180L (Xterasys Cardbus XN-2411b, Belkin F5D6001) or 241 the Ralink RT2400 (SMC2635W) without a model number change. 242 243 Thanks to Infineon-ADMtek for their support of this driver. 244 245config MAC80211_HWSIM 246 tristate "Simulated radio testing tool for mac80211" 247 depends on MAC80211 248 ---help--- 249 This driver is a developer testing tool that can be used to test 250 IEEE 802.11 networking stack (mac80211) functionality. This is not 251 needed for normal wireless LAN usage and is only for testing. See 252 Documentation/networking/mac80211_hwsim for more information on how 253 to use this tool. 254 255 To compile this driver as a module, choose M here: the module will be 256 called mac80211_hwsim. If unsure, say N. 257 258config MWL8K 259 tristate "Marvell 88W8xxx PCI/PCIe Wireless support" 260 depends on MAC80211 && PCI && EXPERIMENTAL 261 ---help--- 262 This driver supports Marvell TOPDOG 802.11 wireless cards. 263 264 To compile this driver as a module, choose M here: the module 265 will be called mwl8k. If unsure, say N. 266 267source "drivers/net/wireless/ath/Kconfig" 268source "drivers/net/wireless/b43/Kconfig" 269source "drivers/net/wireless/b43legacy/Kconfig" 270source "drivers/net/wireless/brcm80211/Kconfig" 271source "drivers/net/wireless/hostap/Kconfig" 272source "drivers/net/wireless/ipw2x00/Kconfig" 273source "drivers/net/wireless/iwlwifi/Kconfig" 274source "drivers/net/wireless/iwlegacy/Kconfig" 275source "drivers/net/wireless/libertas/Kconfig" 276source "drivers/net/wireless/orinoco/Kconfig" 277source "drivers/net/wireless/p54/Kconfig" 278source "drivers/net/wireless/rt2x00/Kconfig" 279source "drivers/net/wireless/rtlwifi/Kconfig" 280source "drivers/net/wireless/ti/Kconfig" 281source "drivers/net/wireless/zd1211rw/Kconfig" 282source "drivers/net/wireless/mwifiex/Kconfig" 283 284endif # WLAN 285