1 // SPDX-License-Identifier: GPL-2.0-only 2 /* 3 * Goramo PCI200SYN synchronous serial card driver for Linux 4 * 5 * Copyright (C) 2002-2008 Krzysztof Halasa <khc@pm.waw.pl> 6 * 7 * For information see <http://www.kernel.org/pub/linux/utils/net/hdlc/> 8 * 9 * Sources of information: 10 * Hitachi HD64572 SCA-II User's Manual 11 * PLX Technology Inc. PCI9052 Data Book 12 */ 13 14 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt 15 16 #include <linux/module.h> 17 #include <linux/kernel.h> 18 #include <linux/capability.h> 19 #include <linux/slab.h> 20 #include <linux/types.h> 21 #include <linux/fcntl.h> 22 #include <linux/in.h> 23 #include <linux/string.h> 24 #include <linux/errno.h> 25 #include <linux/init.h> 26 #include <linux/ioport.h> 27 #include <linux/netdevice.h> 28 #include <linux/hdlc.h> 29 #include <linux/pci.h> 30 #include <linux/delay.h> 31 #include <asm/io.h> 32 33 #include "hd64572.h" 34 35 #undef DEBUG_PKT 36 #define DEBUG_RINGS 37 38 #define PCI200SYN_PLX_SIZE 0x80 /* PLX control window size (128b) */ 39 #define PCI200SYN_SCA_SIZE 0x400 /* SCA window size (1Kb) */ 40 #define MAX_TX_BUFFERS 10 41 42 static int pci_clock_freq = 33000000; 43 #define CLOCK_BASE pci_clock_freq 44 45 /* 46 * PLX PCI9052 local configuration and shared runtime registers. 47 * This structure can be used to access 9052 registers (memory mapped). 48 */ 49 typedef struct { 50 u32 loc_addr_range[4]; /* 00-0Ch : Local Address Ranges */ 51 u32 loc_rom_range; /* 10h : Local ROM Range */ 52 u32 loc_addr_base[4]; /* 14-20h : Local Address Base Addrs */ 53 u32 loc_rom_base; /* 24h : Local ROM Base */ 54 u32 loc_bus_descr[4]; /* 28-34h : Local Bus Descriptors */ 55 u32 rom_bus_descr; /* 38h : ROM Bus Descriptor */ 56 u32 cs_base[4]; /* 3C-48h : Chip Select Base Addrs */ 57 u32 intr_ctrl_stat; /* 4Ch : Interrupt Control/Status */ 58 u32 init_ctrl; /* 50h : EEPROM ctrl, Init Ctrl, etc */ 59 }plx9052; 60 61 62 63 typedef struct port_s { 64 struct napi_struct napi; 65 struct net_device *netdev; 66 struct card_s *card; 67 spinlock_t lock; /* TX lock */ 68 sync_serial_settings settings; 69 int rxpart; /* partial frame received, next frame invalid*/ 70 unsigned short encoding; 71 unsigned short parity; 72 u16 rxin; /* rx ring buffer 'in' pointer */ 73 u16 txin; /* tx ring buffer 'in' and 'last' pointers */ 74 u16 txlast; 75 u8 rxs, txs, tmc; /* SCA registers */ 76 u8 chan; /* physical port # - 0 or 1 */ 77 }port_t; 78 79 80 81 typedef struct card_s { 82 u8 __iomem *rambase; /* buffer memory base (virtual) */ 83 u8 __iomem *scabase; /* SCA memory base (virtual) */ 84 plx9052 __iomem *plxbase;/* PLX registers memory base (virtual) */ 85 u16 rx_ring_buffers; /* number of buffers in a ring */ 86 u16 tx_ring_buffers; 87 u16 buff_offset; /* offset of first buffer of first channel */ 88 u8 irq; /* interrupt request level */ 89 90 port_t ports[2]; 91 }card_t; 92 93 94 #define get_port(card, port) (&card->ports[port]) 95 #define sca_flush(card) (sca_in(IER0, card)); 96 97 static inline void new_memcpy_toio(char __iomem *dest, char *src, int length) 98 { 99 int len; 100 do { 101 len = length > 256 ? 256 : length; 102 memcpy_toio(dest, src, len); 103 dest += len; 104 src += len; 105 length -= len; 106 readb(dest); 107 } while (len); 108 } 109 110 #undef memcpy_toio 111 #define memcpy_toio new_memcpy_toio 112 113 #include "hd64572.c" 114 115 116 static void pci200_set_iface(port_t *port) 117 { 118 card_t *card = port->card; 119 u16 msci = get_msci(port); 120 u8 rxs = port->rxs & CLK_BRG_MASK; 121 u8 txs = port->txs & CLK_BRG_MASK; 122 123 sca_out(EXS_TES1, (port->chan ? MSCI1_OFFSET : MSCI0_OFFSET) + EXS, 124 port->card); 125 switch(port->settings.clock_type) { 126 case CLOCK_INT: 127 rxs |= CLK_BRG; /* BRG output */ 128 txs |= CLK_PIN_OUT | CLK_TX_RXCLK; /* RX clock */ 129 break; 130 131 case CLOCK_TXINT: 132 rxs |= CLK_LINE; /* RXC input */ 133 txs |= CLK_PIN_OUT | CLK_BRG; /* BRG output */ 134 break; 135 136 case CLOCK_TXFROMRX: 137 rxs |= CLK_LINE; /* RXC input */ 138 txs |= CLK_PIN_OUT | CLK_TX_RXCLK; /* RX clock */ 139 break; 140 141 default: /* EXTernal clock */ 142 rxs |= CLK_LINE; /* RXC input */ 143 txs |= CLK_PIN_OUT | CLK_LINE; /* TXC input */ 144 break; 145 } 146 147 port->rxs = rxs; 148 port->txs = txs; 149 sca_out(rxs, msci + RXS, card); 150 sca_out(txs, msci + TXS, card); 151 sca_set_port(port); 152 } 153 154 155 156 static int pci200_open(struct net_device *dev) 157 { 158 port_t *port = dev_to_port(dev); 159 160 int result = hdlc_open(dev); 161 if (result) 162 return result; 163 164 sca_open(dev); 165 pci200_set_iface(port); 166 sca_flush(port->card); 167 return 0; 168 } 169 170 171 172 static int pci200_close(struct net_device *dev) 173 { 174 sca_close(dev); 175 sca_flush(dev_to_port(dev)->card); 176 hdlc_close(dev); 177 return 0; 178 } 179 180 181 182 static int pci200_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd) 183 { 184 const size_t size = sizeof(sync_serial_settings); 185 sync_serial_settings new_line; 186 sync_serial_settings __user *line = ifr->ifr_settings.ifs_ifsu.sync; 187 port_t *port = dev_to_port(dev); 188 189 #ifdef DEBUG_RINGS 190 if (cmd == SIOCDEVPRIVATE) { 191 sca_dump_rings(dev); 192 return 0; 193 } 194 #endif 195 if (cmd != SIOCWANDEV) 196 return hdlc_ioctl(dev, ifr, cmd); 197 198 switch(ifr->ifr_settings.type) { 199 case IF_GET_IFACE: 200 ifr->ifr_settings.type = IF_IFACE_V35; 201 if (ifr->ifr_settings.size < size) { 202 ifr->ifr_settings.size = size; /* data size wanted */ 203 return -ENOBUFS; 204 } 205 if (copy_to_user(line, &port->settings, size)) 206 return -EFAULT; 207 return 0; 208 209 case IF_IFACE_V35: 210 case IF_IFACE_SYNC_SERIAL: 211 if (!capable(CAP_NET_ADMIN)) 212 return -EPERM; 213 214 if (copy_from_user(&new_line, line, size)) 215 return -EFAULT; 216 217 if (new_line.clock_type != CLOCK_EXT && 218 new_line.clock_type != CLOCK_TXFROMRX && 219 new_line.clock_type != CLOCK_INT && 220 new_line.clock_type != CLOCK_TXINT) 221 return -EINVAL; /* No such clock setting */ 222 223 if (new_line.loopback != 0 && new_line.loopback != 1) 224 return -EINVAL; 225 226 memcpy(&port->settings, &new_line, size); /* Update settings */ 227 pci200_set_iface(port); 228 sca_flush(port->card); 229 return 0; 230 231 default: 232 return hdlc_ioctl(dev, ifr, cmd); 233 } 234 } 235 236 237 238 static void pci200_pci_remove_one(struct pci_dev *pdev) 239 { 240 int i; 241 card_t *card = pci_get_drvdata(pdev); 242 243 for (i = 0; i < 2; i++) 244 if (card->ports[i].card) 245 unregister_hdlc_device(card->ports[i].netdev); 246 247 if (card->irq) 248 free_irq(card->irq, card); 249 250 if (card->rambase) 251 iounmap(card->rambase); 252 if (card->scabase) 253 iounmap(card->scabase); 254 if (card->plxbase) 255 iounmap(card->plxbase); 256 257 pci_release_regions(pdev); 258 pci_disable_device(pdev); 259 if (card->ports[0].netdev) 260 free_netdev(card->ports[0].netdev); 261 if (card->ports[1].netdev) 262 free_netdev(card->ports[1].netdev); 263 kfree(card); 264 } 265 266 static const struct net_device_ops pci200_ops = { 267 .ndo_open = pci200_open, 268 .ndo_stop = pci200_close, 269 .ndo_start_xmit = hdlc_start_xmit, 270 .ndo_do_ioctl = pci200_ioctl, 271 }; 272 273 static int pci200_pci_init_one(struct pci_dev *pdev, 274 const struct pci_device_id *ent) 275 { 276 card_t *card; 277 u32 __iomem *p; 278 int i; 279 u32 ramsize; 280 u32 ramphys; /* buffer memory base */ 281 u32 scaphys; /* SCA memory base */ 282 u32 plxphys; /* PLX registers memory base */ 283 284 i = pci_enable_device(pdev); 285 if (i) 286 return i; 287 288 i = pci_request_regions(pdev, "PCI200SYN"); 289 if (i) { 290 pci_disable_device(pdev); 291 return i; 292 } 293 294 card = kzalloc(sizeof(card_t), GFP_KERNEL); 295 if (card == NULL) { 296 pci_release_regions(pdev); 297 pci_disable_device(pdev); 298 return -ENOBUFS; 299 } 300 pci_set_drvdata(pdev, card); 301 card->ports[0].netdev = alloc_hdlcdev(&card->ports[0]); 302 card->ports[1].netdev = alloc_hdlcdev(&card->ports[1]); 303 if (!card->ports[0].netdev || !card->ports[1].netdev) { 304 pr_err("unable to allocate memory\n"); 305 pci200_pci_remove_one(pdev); 306 return -ENOMEM; 307 } 308 309 if (pci_resource_len(pdev, 0) != PCI200SYN_PLX_SIZE || 310 pci_resource_len(pdev, 2) != PCI200SYN_SCA_SIZE || 311 pci_resource_len(pdev, 3) < 16384) { 312 pr_err("invalid card EEPROM parameters\n"); 313 pci200_pci_remove_one(pdev); 314 return -EFAULT; 315 } 316 317 plxphys = pci_resource_start(pdev,0) & PCI_BASE_ADDRESS_MEM_MASK; 318 card->plxbase = ioremap(plxphys, PCI200SYN_PLX_SIZE); 319 320 scaphys = pci_resource_start(pdev,2) & PCI_BASE_ADDRESS_MEM_MASK; 321 card->scabase = ioremap(scaphys, PCI200SYN_SCA_SIZE); 322 323 ramphys = pci_resource_start(pdev,3) & PCI_BASE_ADDRESS_MEM_MASK; 324 card->rambase = pci_ioremap_bar(pdev, 3); 325 326 if (card->plxbase == NULL || 327 card->scabase == NULL || 328 card->rambase == NULL) { 329 pr_err("ioremap() failed\n"); 330 pci200_pci_remove_one(pdev); 331 return -EFAULT; 332 } 333 334 /* Reset PLX */ 335 p = &card->plxbase->init_ctrl; 336 writel(readl(p) | 0x40000000, p); 337 readl(p); /* Flush the write - do not use sca_flush */ 338 udelay(1); 339 340 writel(readl(p) & ~0x40000000, p); 341 readl(p); /* Flush the write - do not use sca_flush */ 342 udelay(1); 343 344 ramsize = sca_detect_ram(card, card->rambase, 345 pci_resource_len(pdev, 3)); 346 347 /* number of TX + RX buffers for one port - this is dual port card */ 348 i = ramsize / (2 * (sizeof(pkt_desc) + HDLC_MAX_MRU)); 349 card->tx_ring_buffers = min(i / 2, MAX_TX_BUFFERS); 350 card->rx_ring_buffers = i - card->tx_ring_buffers; 351 352 card->buff_offset = 2 * sizeof(pkt_desc) * (card->tx_ring_buffers + 353 card->rx_ring_buffers); 354 355 pr_info("%u KB RAM at 0x%x, IRQ%u, using %u TX + %u RX packets rings\n", 356 ramsize / 1024, ramphys, 357 pdev->irq, card->tx_ring_buffers, card->rx_ring_buffers); 358 359 if (card->tx_ring_buffers < 1) { 360 pr_err("RAM test failed\n"); 361 pci200_pci_remove_one(pdev); 362 return -EFAULT; 363 } 364 365 /* Enable interrupts on the PCI bridge */ 366 p = &card->plxbase->intr_ctrl_stat; 367 writew(readw(p) | 0x0040, p); 368 369 /* Allocate IRQ */ 370 if (request_irq(pdev->irq, sca_intr, IRQF_SHARED, "pci200syn", card)) { 371 pr_warn("could not allocate IRQ%d\n", pdev->irq); 372 pci200_pci_remove_one(pdev); 373 return -EBUSY; 374 } 375 card->irq = pdev->irq; 376 377 sca_init(card, 0); 378 379 for (i = 0; i < 2; i++) { 380 port_t *port = &card->ports[i]; 381 struct net_device *dev = port->netdev; 382 hdlc_device *hdlc = dev_to_hdlc(dev); 383 port->chan = i; 384 385 spin_lock_init(&port->lock); 386 dev->irq = card->irq; 387 dev->mem_start = ramphys; 388 dev->mem_end = ramphys + ramsize - 1; 389 dev->tx_queue_len = 50; 390 dev->netdev_ops = &pci200_ops; 391 hdlc->attach = sca_attach; 392 hdlc->xmit = sca_xmit; 393 port->settings.clock_type = CLOCK_EXT; 394 port->card = card; 395 sca_init_port(port); 396 if (register_hdlc_device(dev)) { 397 pr_err("unable to register hdlc device\n"); 398 port->card = NULL; 399 pci200_pci_remove_one(pdev); 400 return -ENOBUFS; 401 } 402 403 netdev_info(dev, "PCI200SYN channel %d\n", port->chan); 404 } 405 406 sca_flush(card); 407 return 0; 408 } 409 410 411 412 static const struct pci_device_id pci200_pci_tbl[] = { 413 { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050, PCI_VENDOR_ID_PLX, 414 PCI_DEVICE_ID_PLX_PCI200SYN, 0, 0, 0 }, 415 { 0, } 416 }; 417 418 419 static struct pci_driver pci200_pci_driver = { 420 .name = "PCI200SYN", 421 .id_table = pci200_pci_tbl, 422 .probe = pci200_pci_init_one, 423 .remove = pci200_pci_remove_one, 424 }; 425 426 427 static int __init pci200_init_module(void) 428 { 429 if (pci_clock_freq < 1000000 || pci_clock_freq > 80000000) { 430 pr_err("Invalid PCI clock frequency\n"); 431 return -EINVAL; 432 } 433 return pci_register_driver(&pci200_pci_driver); 434 } 435 436 437 438 static void __exit pci200_cleanup_module(void) 439 { 440 pci_unregister_driver(&pci200_pci_driver); 441 } 442 443 MODULE_AUTHOR("Krzysztof Halasa <khc@pm.waw.pl>"); 444 MODULE_DESCRIPTION("Goramo PCI200SYN serial port driver"); 445 MODULE_LICENSE("GPL v2"); 446 MODULE_DEVICE_TABLE(pci, pci200_pci_tbl); 447 module_param(pci_clock_freq, int, 0444); 448 MODULE_PARM_DESC(pci_clock_freq, "System PCI clock frequency in Hz"); 449 module_init(pci200_init_module); 450 module_exit(pci200_cleanup_module); 451