1 /* 2 * Copyright (C) 2002 Pavel Machek <pavel@ucw.cz> 3 * Copyright (C) 2002-2005 by David Brownell 4 * 5 * This program is free software; you can redistribute it and/or modify 6 * it under the terms of the GNU General Public License as published by 7 * the Free Software Foundation; either version 2 of the License, or 8 * (at your option) any later version. 9 * 10 * This program is distributed in the hope that it will be useful, 11 * but WITHOUT ANY WARRANTY; without even the implied warranty of 12 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 13 * GNU General Public License for more details. 14 * 15 * You should have received a copy of the GNU General Public License 16 * along with this program; if not, write to the Free Software 17 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA 18 */ 19 20 // #define DEBUG // error path messages, extra info 21 // #define VERBOSE // more; success messages 22 23 #include <linux/module.h> 24 #include <linux/init.h> 25 #include <linux/netdevice.h> 26 #include <linux/ethtool.h> 27 #include <linux/workqueue.h> 28 #include <linux/mii.h> 29 #include <linux/crc32.h> 30 #include <linux/usb.h> 31 #include <linux/usb/cdc.h> 32 #include <linux/usb/usbnet.h> 33 34 35 /* 36 * All known Zaurii lie about their standards conformance. At least 37 * the earliest SA-1100 models lie by saying they support CDC Ethernet. 38 * Some later models (especially PXA-25x and PXA-27x based ones) lie 39 * and say they support CDC MDLM (for access to cell phone modems). 40 * 41 * There are non-Zaurus products that use these same protocols too. 42 * 43 * The annoying thing is that at the same time Sharp was developing 44 * that annoying standards-breaking software, the Linux community had 45 * a simple "CDC Subset" working reliably on the same SA-1100 hardware. 46 * That is, the same functionality but not violating standards. 47 * 48 * The CDC Ethernet nonconformance points are troublesome to hosts 49 * with a true CDC Ethernet implementation: 50 * - Framing appends a CRC, which the spec says drivers "must not" do; 51 * - Transfers data in altsetting zero, instead of altsetting 1; 52 * - All these peripherals use the same ethernet address. 53 * 54 * The CDC MDLM nonconformance is less immediately troublesome, since all 55 * MDLM implementations are quasi-proprietary anyway. 56 */ 57 58 static struct sk_buff * 59 zaurus_tx_fixup(struct usbnet *dev, struct sk_buff *skb, gfp_t flags) 60 { 61 int padlen; 62 struct sk_buff *skb2; 63 64 padlen = 2; 65 if (!skb_cloned(skb)) { 66 int tailroom = skb_tailroom(skb); 67 if ((padlen + 4) <= tailroom) 68 goto done; 69 } 70 skb2 = skb_copy_expand(skb, 0, 4 + padlen, flags); 71 dev_kfree_skb_any(skb); 72 skb = skb2; 73 if (skb) { 74 u32 fcs; 75 done: 76 fcs = crc32_le(~0, skb->data, skb->len); 77 fcs = ~fcs; 78 79 *skb_put (skb, 1) = fcs & 0xff; 80 *skb_put (skb, 1) = (fcs>> 8) & 0xff; 81 *skb_put (skb, 1) = (fcs>>16) & 0xff; 82 *skb_put (skb, 1) = (fcs>>24) & 0xff; 83 } 84 return skb; 85 } 86 87 static int zaurus_bind(struct usbnet *dev, struct usb_interface *intf) 88 { 89 /* Belcarra's funky framing has other options; mostly 90 * TRAILERS (!) with 4 bytes CRC, and maybe 2 pad bytes. 91 */ 92 dev->net->hard_header_len += 6; 93 dev->rx_urb_size = dev->net->hard_header_len + dev->net->mtu; 94 return usbnet_generic_cdc_bind(dev, intf); 95 } 96 97 /* PDA style devices are always connected if present */ 98 static int always_connected (struct usbnet *dev) 99 { 100 return 0; 101 } 102 103 static const struct driver_info zaurus_sl5x00_info = { 104 .description = "Sharp Zaurus SL-5x00", 105 .flags = FLAG_POINTTOPOINT | FLAG_FRAMING_Z, 106 .check_connect = always_connected, 107 .bind = zaurus_bind, 108 .unbind = usbnet_cdc_unbind, 109 .tx_fixup = zaurus_tx_fixup, 110 }; 111 #define ZAURUS_STRONGARM_INFO ((unsigned long)&zaurus_sl5x00_info) 112 113 static const struct driver_info zaurus_pxa_info = { 114 .description = "Sharp Zaurus, PXA-2xx based", 115 .flags = FLAG_POINTTOPOINT | FLAG_FRAMING_Z, 116 .check_connect = always_connected, 117 .bind = zaurus_bind, 118 .unbind = usbnet_cdc_unbind, 119 .tx_fixup = zaurus_tx_fixup, 120 }; 121 #define ZAURUS_PXA_INFO ((unsigned long)&zaurus_pxa_info) 122 123 static const struct driver_info olympus_mxl_info = { 124 .description = "Olympus R1000", 125 .flags = FLAG_POINTTOPOINT | FLAG_FRAMING_Z, 126 .check_connect = always_connected, 127 .bind = zaurus_bind, 128 .unbind = usbnet_cdc_unbind, 129 .tx_fixup = zaurus_tx_fixup, 130 }; 131 #define OLYMPUS_MXL_INFO ((unsigned long)&olympus_mxl_info) 132 133 134 /* Some more recent products using Lineo/Belcarra code will wrongly claim 135 * CDC MDLM conformance. They aren't conformant: data endpoints live 136 * in the control interface, there's no data interface, and it's not used 137 * to talk to a cell phone radio. But at least we can detect these two 138 * pseudo-classes, rather than growing this product list with entries for 139 * each new nonconformant product (sigh). 140 */ 141 static const u8 safe_guid[16] = { 142 0x5d, 0x34, 0xcf, 0x66, 0x11, 0x18, 0x11, 0xd6, 143 0xa2, 0x1a, 0x00, 0x01, 0x02, 0xca, 0x9a, 0x7f, 144 }; 145 static const u8 blan_guid[16] = { 146 0x74, 0xf0, 0x3d, 0xbd, 0x1e, 0xc1, 0x44, 0x70, 147 0xa3, 0x67, 0x71, 0x34, 0xc9, 0xf5, 0x54, 0x37, 148 }; 149 150 static int blan_mdlm_bind(struct usbnet *dev, struct usb_interface *intf) 151 { 152 u8 *buf = intf->cur_altsetting->extra; 153 int len = intf->cur_altsetting->extralen; 154 struct usb_cdc_mdlm_desc *desc = NULL; 155 struct usb_cdc_mdlm_detail_desc *detail = NULL; 156 157 while (len > 3) { 158 if (buf [1] != USB_DT_CS_INTERFACE) 159 goto next_desc; 160 161 /* use bDescriptorSubType, and just verify that we get a 162 * "BLAN" (or "SAFE") descriptor. 163 */ 164 switch (buf [2]) { 165 case USB_CDC_MDLM_TYPE: 166 if (desc) { 167 dev_dbg(&intf->dev, "extra MDLM\n"); 168 goto bad_desc; 169 } 170 desc = (void *) buf; 171 if (desc->bLength != sizeof *desc) { 172 dev_dbg(&intf->dev, "MDLM len %u\n", 173 desc->bLength); 174 goto bad_desc; 175 } 176 /* expect bcdVersion 1.0, ignore */ 177 if (memcmp(&desc->bGUID, blan_guid, 16) && 178 memcmp(&desc->bGUID, safe_guid, 16)) { 179 /* hey, this one might _really_ be MDLM! */ 180 dev_dbg(&intf->dev, "MDLM guid\n"); 181 goto bad_desc; 182 } 183 break; 184 case USB_CDC_MDLM_DETAIL_TYPE: 185 if (detail) { 186 dev_dbg(&intf->dev, "extra MDLM detail\n"); 187 goto bad_desc; 188 } 189 detail = (void *) buf; 190 switch (detail->bGuidDescriptorType) { 191 case 0: /* "SAFE" */ 192 if (detail->bLength != (sizeof *detail + 2)) 193 goto bad_detail; 194 break; 195 case 1: /* "BLAN" */ 196 if (detail->bLength != (sizeof *detail + 3)) 197 goto bad_detail; 198 break; 199 default: 200 goto bad_detail; 201 } 202 203 /* assuming we either noticed BLAN already, or will 204 * find it soon, there are some data bytes here: 205 * - bmNetworkCapabilities (unused) 206 * - bmDataCapabilities (bits, see below) 207 * - bPad (ignored, for PADAFTER -- BLAN-only) 208 * bits are: 209 * - 0x01 -- Zaurus framing (add CRC) 210 * - 0x02 -- PADBEFORE (CRC includes some padding) 211 * - 0x04 -- PADAFTER (some padding after CRC) 212 * - 0x08 -- "fermat" packet mangling (for hw bugs) 213 * the PADBEFORE appears not to matter; we interop 214 * with devices that use it and those that don't. 215 */ 216 if ((detail->bDetailData[1] & ~0x02) != 0x01) { 217 /* bmDataCapabilities == 0 would be fine too, 218 * but framing is minidriver-coupled for now. 219 */ 220 bad_detail: 221 dev_dbg(&intf->dev, 222 "bad MDLM detail, %d %d %d\n", 223 detail->bLength, 224 detail->bDetailData[0], 225 detail->bDetailData[2]); 226 goto bad_desc; 227 } 228 229 /* same extra framing as for non-BLAN mode */ 230 dev->net->hard_header_len += 6; 231 dev->rx_urb_size = dev->net->hard_header_len 232 + dev->net->mtu; 233 break; 234 } 235 next_desc: 236 len -= buf [0]; /* bLength */ 237 buf += buf [0]; 238 } 239 240 if (!desc || !detail) { 241 dev_dbg(&intf->dev, "missing cdc mdlm %s%sdescriptor\n", 242 desc ? "" : "func ", 243 detail ? "" : "detail "); 244 goto bad_desc; 245 } 246 247 /* There's probably a CDC Ethernet descriptor there, but we can't 248 * rely on the Ethernet address it provides since not all vendors 249 * bother to make it unique. Likewise there's no point in tracking 250 * of the CDC event notifications. 251 */ 252 return usbnet_get_endpoints(dev, intf); 253 254 bad_desc: 255 dev_info(&dev->udev->dev, "unsupported MDLM descriptors\n"); 256 return -ENODEV; 257 } 258 259 static const struct driver_info bogus_mdlm_info = { 260 .description = "pseudo-MDLM (BLAN) device", 261 .flags = FLAG_POINTTOPOINT | FLAG_FRAMING_Z, 262 .check_connect = always_connected, 263 .tx_fixup = zaurus_tx_fixup, 264 .bind = blan_mdlm_bind, 265 }; 266 267 static const struct usb_device_id products [] = { 268 #define ZAURUS_MASTER_INTERFACE \ 269 .bInterfaceClass = USB_CLASS_COMM, \ 270 .bInterfaceSubClass = USB_CDC_SUBCLASS_ETHERNET, \ 271 .bInterfaceProtocol = USB_CDC_PROTO_NONE 272 273 /* SA-1100 based Sharp Zaurus ("collie"), or compatible. */ 274 { 275 .match_flags = USB_DEVICE_ID_MATCH_INT_INFO 276 | USB_DEVICE_ID_MATCH_DEVICE, 277 .idVendor = 0x04DD, 278 .idProduct = 0x8004, 279 ZAURUS_MASTER_INTERFACE, 280 .driver_info = ZAURUS_STRONGARM_INFO, 281 }, 282 283 /* PXA-2xx based models are also lying-about-cdc. If you add any 284 * more devices that claim to be CDC Ethernet, make sure they get 285 * added to the blacklist in cdc_ether too. 286 * 287 * NOTE: OpenZaurus versions with 2.6 kernels won't use these entries, 288 * unlike the older ones with 2.4 "embedix" kernels. 289 */ 290 { 291 .match_flags = USB_DEVICE_ID_MATCH_INT_INFO 292 | USB_DEVICE_ID_MATCH_DEVICE, 293 .idVendor = 0x04DD, 294 .idProduct = 0x8005, /* A-300 */ 295 ZAURUS_MASTER_INTERFACE, 296 .driver_info = ZAURUS_PXA_INFO, 297 }, { 298 .match_flags = USB_DEVICE_ID_MATCH_INT_INFO 299 | USB_DEVICE_ID_MATCH_DEVICE, 300 .idVendor = 0x04DD, 301 .idProduct = 0x8006, /* B-500/SL-5600 */ 302 ZAURUS_MASTER_INTERFACE, 303 .driver_info = ZAURUS_PXA_INFO, 304 }, { 305 .match_flags = USB_DEVICE_ID_MATCH_INT_INFO 306 | USB_DEVICE_ID_MATCH_DEVICE, 307 .idVendor = 0x04DD, 308 .idProduct = 0x8007, /* C-700 */ 309 ZAURUS_MASTER_INTERFACE, 310 .driver_info = ZAURUS_PXA_INFO, 311 }, { 312 .match_flags = USB_DEVICE_ID_MATCH_INT_INFO 313 | USB_DEVICE_ID_MATCH_DEVICE, 314 .idVendor = 0x04DD, 315 .idProduct = 0x9031, /* C-750 C-760 */ 316 ZAURUS_MASTER_INTERFACE, 317 .driver_info = ZAURUS_PXA_INFO, 318 }, { 319 /* C-750/C-760/C-860/SL-C3000 PDA in MDLM mode */ 320 USB_DEVICE_AND_INTERFACE_INFO(0x04DD, 0x9031, USB_CLASS_COMM, 321 USB_CDC_SUBCLASS_MDLM, USB_CDC_PROTO_NONE), 322 .driver_info = (unsigned long) &bogus_mdlm_info, 323 }, { 324 .match_flags = USB_DEVICE_ID_MATCH_INT_INFO 325 | USB_DEVICE_ID_MATCH_DEVICE, 326 .idVendor = 0x04DD, 327 .idProduct = 0x9032, /* SL-6000 */ 328 ZAURUS_MASTER_INTERFACE, 329 .driver_info = ZAURUS_PXA_INFO, 330 }, { 331 .match_flags = USB_DEVICE_ID_MATCH_INT_INFO 332 | USB_DEVICE_ID_MATCH_DEVICE, 333 .idVendor = 0x04DD, 334 /* reported with some C860 units */ 335 .idProduct = 0x9050, /* C-860 */ 336 ZAURUS_MASTER_INTERFACE, 337 .driver_info = ZAURUS_PXA_INFO, 338 }, 339 { 340 /* Motorola Rokr E6 */ 341 USB_DEVICE_AND_INTERFACE_INFO(0x22b8, 0x6027, USB_CLASS_COMM, 342 USB_CDC_SUBCLASS_MDLM, USB_CDC_PROTO_NONE), 343 .driver_info = (unsigned long) &bogus_mdlm_info, 344 }, { 345 /* Motorola MOTOMAGX phones */ 346 USB_DEVICE_AND_INTERFACE_INFO(0x22b8, 0x6425, USB_CLASS_COMM, 347 USB_CDC_SUBCLASS_MDLM, USB_CDC_PROTO_NONE), 348 .driver_info = (unsigned long) &bogus_mdlm_info, 349 }, 350 351 /* Olympus has some models with a Zaurus-compatible option. 352 * R-1000 uses a FreeScale i.MXL cpu (ARMv4T) 353 */ 354 { 355 .match_flags = USB_DEVICE_ID_MATCH_INT_INFO 356 | USB_DEVICE_ID_MATCH_DEVICE, 357 .idVendor = 0x07B4, 358 .idProduct = 0x0F02, /* R-1000 */ 359 ZAURUS_MASTER_INTERFACE, 360 .driver_info = OLYMPUS_MXL_INFO, 361 }, 362 363 /* Logitech Harmony 900 - uses the pseudo-MDLM (BLAN) driver */ 364 { 365 USB_DEVICE_AND_INTERFACE_INFO(0x046d, 0xc11f, USB_CLASS_COMM, 366 USB_CDC_SUBCLASS_MDLM, USB_CDC_PROTO_NONE), 367 .driver_info = (unsigned long) &bogus_mdlm_info, 368 }, 369 { }, // END 370 }; 371 MODULE_DEVICE_TABLE(usb, products); 372 373 static struct usb_driver zaurus_driver = { 374 .name = "zaurus", 375 .id_table = products, 376 .probe = usbnet_probe, 377 .disconnect = usbnet_disconnect, 378 .suspend = usbnet_suspend, 379 .resume = usbnet_resume, 380 .disable_hub_initiated_lpm = 1, 381 }; 382 383 module_usb_driver(zaurus_driver); 384 385 MODULE_AUTHOR("Pavel Machek, David Brownell"); 386 MODULE_DESCRIPTION("Sharp Zaurus PDA, and compatible products"); 387 MODULE_LICENSE("GPL"); 388