xref: /linux/drivers/net/usb/hso.c (revision ac8b422838046ffc26be4874a3cbae0d313f4209)
1 /******************************************************************************
2  *
3  * Driver for Option High Speed Mobile Devices.
4  *
5  *  Copyright (C) 2008 Option International
6  *                     Filip Aben <f.aben@option.com>
7  *                     Denis Joseph Barrow <d.barow@option.com>
8  *                     Jan Dumon <j.dumon@option.com>
9  *  Copyright (C) 2007 Andrew Bird (Sphere Systems Ltd)
10  *  			<ajb@spheresystems.co.uk>
11  *  Copyright (C) 2008 Greg Kroah-Hartman <gregkh@suse.de>
12  *  Copyright (C) 2008 Novell, Inc.
13  *
14  *  This program is free software; you can redistribute it and/or modify
15  *  it under the terms of the GNU General Public License version 2 as
16  *  published by the Free Software Foundation.
17  *
18  *  This program is distributed in the hope that it will be useful,
19  *  but WITHOUT ANY WARRANTY; without even the implied warranty of
20  *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
21  *  GNU General Public License for more details.
22  *
23  *  You should have received a copy of the GNU General Public License
24  *  along with this program; if not, write to the Free Software
25  *  Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301,
26  *  USA
27  *
28  *
29  *****************************************************************************/
30 
31 /******************************************************************************
32  *
33  * Description of the device:
34  *
35  * Interface 0:	Contains the IP network interface on the bulk end points.
36  *		The multiplexed serial ports are using the interrupt and
37  *		control endpoints.
38  *		Interrupt contains a bitmap telling which multiplexed
39  *		serialport needs servicing.
40  *
41  * Interface 1:	Diagnostics port, uses bulk only, do not submit urbs until the
42  *		port is opened, as this have a huge impact on the network port
43  *		throughput.
44  *
45  * Interface 2:	Standard modem interface - circuit switched interface, this
46  *		can be used to make a standard ppp connection however it
47  *              should not be used in conjunction with the IP network interface
48  *              enabled for USB performance reasons i.e. if using this set
49  *              ideally disable_net=1.
50  *
51  *****************************************************************************/
52 
53 #include <linux/sched.h>
54 #include <linux/slab.h>
55 #include <linux/init.h>
56 #include <linux/delay.h>
57 #include <linux/netdevice.h>
58 #include <linux/module.h>
59 #include <linux/ethtool.h>
60 #include <linux/usb.h>
61 #include <linux/timer.h>
62 #include <linux/tty.h>
63 #include <linux/tty_driver.h>
64 #include <linux/tty_flip.h>
65 #include <linux/kmod.h>
66 #include <linux/rfkill.h>
67 #include <linux/ip.h>
68 #include <linux/uaccess.h>
69 #include <linux/usb/cdc.h>
70 #include <net/arp.h>
71 #include <asm/byteorder.h>
72 #include <linux/serial_core.h>
73 #include <linux/serial.h>
74 
75 
76 #define DRIVER_VERSION			"1.2"
77 #define MOD_AUTHOR			"Option Wireless"
78 #define MOD_DESCRIPTION			"USB High Speed Option driver"
79 #define MOD_LICENSE			"GPL"
80 
81 #define HSO_MAX_NET_DEVICES		10
82 #define HSO__MAX_MTU			2048
83 #define DEFAULT_MTU			1500
84 #define DEFAULT_MRU			1500
85 
86 #define CTRL_URB_RX_SIZE		1024
87 #define CTRL_URB_TX_SIZE		64
88 
89 #define BULK_URB_RX_SIZE		4096
90 #define BULK_URB_TX_SIZE		8192
91 
92 #define MUX_BULK_RX_BUF_SIZE		HSO__MAX_MTU
93 #define MUX_BULK_TX_BUF_SIZE		HSO__MAX_MTU
94 #define MUX_BULK_RX_BUF_COUNT		4
95 #define USB_TYPE_OPTION_VENDOR		0x20
96 
97 /* These definitions are used with the struct hso_net flags element */
98 /* - use *_bit operations on it. (bit indices not values.) */
99 #define HSO_NET_RUNNING			0
100 
101 #define	HSO_NET_TX_TIMEOUT		(HZ*10)
102 
103 #define HSO_SERIAL_MAGIC		0x48534f31
104 
105 /* Number of ttys to handle */
106 #define HSO_SERIAL_TTY_MINORS		256
107 
108 #define MAX_RX_URBS			2
109 
110 static inline struct hso_serial *get_serial_by_tty(struct tty_struct *tty)
111 {
112 	if (tty)
113 		return tty->driver_data;
114 	return NULL;
115 }
116 
117 /*****************************************************************************/
118 /* Debugging functions                                                       */
119 /*****************************************************************************/
120 #define D__(lvl_, fmt, arg...)				\
121 	do {						\
122 		printk(lvl_ "[%d:%s]: " fmt "\n",	\
123 		       __LINE__, __func__, ## arg);	\
124 	} while (0)
125 
126 #define D_(lvl, args...)				\
127 	do {						\
128 		if (lvl & debug)			\
129 			D__(KERN_INFO, args);		\
130 	} while (0)
131 
132 #define D1(args...)	D_(0x01, ##args)
133 #define D2(args...)	D_(0x02, ##args)
134 #define D3(args...)	D_(0x04, ##args)
135 #define D4(args...)	D_(0x08, ##args)
136 #define D5(args...)	D_(0x10, ##args)
137 
138 /*****************************************************************************/
139 /* Enumerators                                                               */
140 /*****************************************************************************/
141 enum pkt_parse_state {
142 	WAIT_IP,
143 	WAIT_DATA,
144 	WAIT_SYNC
145 };
146 
147 /*****************************************************************************/
148 /* Structs                                                                   */
149 /*****************************************************************************/
150 
151 struct hso_shared_int {
152 	struct usb_endpoint_descriptor *intr_endp;
153 	void *shared_intr_buf;
154 	struct urb *shared_intr_urb;
155 	struct usb_device *usb;
156 	int use_count;
157 	int ref_count;
158 	struct mutex shared_int_lock;
159 };
160 
161 struct hso_net {
162 	struct hso_device *parent;
163 	struct net_device *net;
164 	struct rfkill *rfkill;
165 
166 	struct usb_endpoint_descriptor *in_endp;
167 	struct usb_endpoint_descriptor *out_endp;
168 
169 	struct urb *mux_bulk_rx_urb_pool[MUX_BULK_RX_BUF_COUNT];
170 	struct urb *mux_bulk_tx_urb;
171 	void *mux_bulk_rx_buf_pool[MUX_BULK_RX_BUF_COUNT];
172 	void *mux_bulk_tx_buf;
173 
174 	struct sk_buff *skb_rx_buf;
175 	struct sk_buff *skb_tx_buf;
176 
177 	enum pkt_parse_state rx_parse_state;
178 	spinlock_t net_lock;
179 
180 	unsigned short rx_buf_size;
181 	unsigned short rx_buf_missing;
182 	struct iphdr rx_ip_hdr;
183 
184 	unsigned long flags;
185 };
186 
187 enum rx_ctrl_state{
188 	RX_IDLE,
189 	RX_SENT,
190 	RX_PENDING
191 };
192 
193 #define BM_REQUEST_TYPE (0xa1)
194 #define B_NOTIFICATION  (0x20)
195 #define W_VALUE         (0x0)
196 #define W_INDEX         (0x2)
197 #define W_LENGTH        (0x2)
198 
199 #define B_OVERRUN       (0x1<<6)
200 #define B_PARITY        (0x1<<5)
201 #define B_FRAMING       (0x1<<4)
202 #define B_RING_SIGNAL   (0x1<<3)
203 #define B_BREAK         (0x1<<2)
204 #define B_TX_CARRIER    (0x1<<1)
205 #define B_RX_CARRIER    (0x1<<0)
206 
207 struct hso_serial_state_notification {
208 	u8 bmRequestType;
209 	u8 bNotification;
210 	u16 wValue;
211 	u16 wIndex;
212 	u16 wLength;
213 	u16 UART_state_bitmap;
214 } __attribute__((packed));
215 
216 struct hso_tiocmget {
217 	struct mutex mutex;
218 	wait_queue_head_t waitq;
219 	int    intr_completed;
220 	struct usb_endpoint_descriptor *endp;
221 	struct urb *urb;
222 	struct hso_serial_state_notification serial_state_notification;
223 	u16    prev_UART_state_bitmap;
224 	struct uart_icount icount;
225 };
226 
227 
228 struct hso_serial {
229 	struct hso_device *parent;
230 	int magic;
231 	u8 minor;
232 
233 	struct hso_shared_int *shared_int;
234 
235 	/* rx/tx urb could be either a bulk urb or a control urb depending
236 	   on which serial port it is used on. */
237 	struct urb *rx_urb[MAX_RX_URBS];
238 	u8 num_rx_urbs;
239 	u8 *rx_data[MAX_RX_URBS];
240 	u16 rx_data_length;	/* should contain allocated length */
241 
242 	struct urb *tx_urb;
243 	u8 *tx_data;
244 	u8 *tx_buffer;
245 	u16 tx_data_length;	/* should contain allocated length */
246 	u16 tx_data_count;
247 	u16 tx_buffer_count;
248 	struct usb_ctrlrequest ctrl_req_tx;
249 	struct usb_ctrlrequest ctrl_req_rx;
250 
251 	struct usb_endpoint_descriptor *in_endp;
252 	struct usb_endpoint_descriptor *out_endp;
253 
254 	enum rx_ctrl_state rx_state;
255 	u8 rts_state;
256 	u8 dtr_state;
257 	unsigned tx_urb_used:1;
258 
259 	/* from usb_serial_port */
260 	struct tty_struct *tty;
261 	int open_count;
262 	spinlock_t serial_lock;
263 
264 	int (*write_data) (struct hso_serial *serial);
265 	struct hso_tiocmget  *tiocmget;
266 	/* Hacks required to get flow control
267 	 * working on the serial receive buffers
268 	 * so as not to drop characters on the floor.
269 	 */
270 	int  curr_rx_urb_idx;
271 	u16  curr_rx_urb_offset;
272 	u8   rx_urb_filled[MAX_RX_URBS];
273 	struct tasklet_struct unthrottle_tasklet;
274 	struct work_struct    retry_unthrottle_workqueue;
275 };
276 
277 struct hso_device {
278 	union {
279 		struct hso_serial *dev_serial;
280 		struct hso_net *dev_net;
281 	} port_data;
282 
283 	u32 port_spec;
284 
285 	u8 is_active;
286 	u8 usb_gone;
287 	struct work_struct async_get_intf;
288 	struct work_struct async_put_intf;
289 	struct work_struct reset_device;
290 
291 	struct usb_device *usb;
292 	struct usb_interface *interface;
293 
294 	struct device *dev;
295 	struct kref ref;
296 	struct mutex mutex;
297 };
298 
299 /* Type of interface */
300 #define HSO_INTF_MASK		0xFF00
301 #define	HSO_INTF_MUX		0x0100
302 #define	HSO_INTF_BULK   	0x0200
303 
304 /* Type of port */
305 #define HSO_PORT_MASK		0xFF
306 #define HSO_PORT_NO_PORT	0x0
307 #define	HSO_PORT_CONTROL	0x1
308 #define	HSO_PORT_APP		0x2
309 #define	HSO_PORT_GPS		0x3
310 #define	HSO_PORT_PCSC		0x4
311 #define	HSO_PORT_APP2		0x5
312 #define HSO_PORT_GPS_CONTROL	0x6
313 #define HSO_PORT_MSD		0x7
314 #define HSO_PORT_VOICE		0x8
315 #define HSO_PORT_DIAG2		0x9
316 #define	HSO_PORT_DIAG		0x10
317 #define	HSO_PORT_MODEM		0x11
318 #define	HSO_PORT_NETWORK	0x12
319 
320 /* Additional device info */
321 #define HSO_INFO_MASK		0xFF000000
322 #define HSO_INFO_CRC_BUG	0x01000000
323 
324 /*****************************************************************************/
325 /* Prototypes                                                                */
326 /*****************************************************************************/
327 /* Serial driver functions */
328 static int hso_serial_tiocmset(struct tty_struct *tty, struct file *file,
329 			       unsigned int set, unsigned int clear);
330 static void ctrl_callback(struct urb *urb);
331 static int put_rxbuf_data(struct urb *urb, struct hso_serial *serial);
332 static void hso_kick_transmit(struct hso_serial *serial);
333 /* Helper functions */
334 static int hso_mux_submit_intr_urb(struct hso_shared_int *mux_int,
335 				   struct usb_device *usb, gfp_t gfp);
336 static void handle_usb_error(int status, const char *function,
337 			     struct hso_device *hso_dev);
338 static struct usb_endpoint_descriptor *hso_get_ep(struct usb_interface *intf,
339 						  int type, int dir);
340 static int hso_get_mux_ports(struct usb_interface *intf, unsigned char *ports);
341 static void hso_free_interface(struct usb_interface *intf);
342 static int hso_start_serial_device(struct hso_device *hso_dev, gfp_t flags);
343 static int hso_stop_serial_device(struct hso_device *hso_dev);
344 static int hso_start_net_device(struct hso_device *hso_dev);
345 static void hso_free_shared_int(struct hso_shared_int *shared_int);
346 static int hso_stop_net_device(struct hso_device *hso_dev);
347 static void hso_serial_ref_free(struct kref *ref);
348 static void hso_std_serial_read_bulk_callback(struct urb *urb);
349 static int hso_mux_serial_read(struct hso_serial *serial);
350 static void async_get_intf(struct work_struct *data);
351 static void async_put_intf(struct work_struct *data);
352 static int hso_put_activity(struct hso_device *hso_dev);
353 static int hso_get_activity(struct hso_device *hso_dev);
354 static void tiocmget_intr_callback(struct urb *urb);
355 static void reset_device(struct work_struct *data);
356 /*****************************************************************************/
357 /* Helping functions                                                         */
358 /*****************************************************************************/
359 
360 /* #define DEBUG */
361 
362 static inline struct hso_net *dev2net(struct hso_device *hso_dev)
363 {
364 	return hso_dev->port_data.dev_net;
365 }
366 
367 static inline struct hso_serial *dev2ser(struct hso_device *hso_dev)
368 {
369 	return hso_dev->port_data.dev_serial;
370 }
371 
372 /* Debugging functions */
373 #ifdef DEBUG
374 static void dbg_dump(int line_count, const char *func_name, unsigned char *buf,
375 		     unsigned int len)
376 {
377 	static char name[255];
378 
379 	sprintf(name, "hso[%d:%s]", line_count, func_name);
380 	print_hex_dump_bytes(name, DUMP_PREFIX_NONE, buf, len);
381 }
382 
383 #define DUMP(buf_, len_)	\
384 	dbg_dump(__LINE__, __func__, (unsigned char *)buf_, len_)
385 
386 #define DUMP1(buf_, len_)			\
387 	do {					\
388 		if (0x01 & debug)		\
389 			DUMP(buf_, len_);	\
390 	} while (0)
391 #else
392 #define DUMP(buf_, len_)
393 #define DUMP1(buf_, len_)
394 #endif
395 
396 /* module parameters */
397 static int debug;
398 static int tty_major;
399 static int disable_net;
400 
401 /* driver info */
402 static const char driver_name[] = "hso";
403 static const char tty_filename[] = "ttyHS";
404 static const char *version = __FILE__ ": " DRIVER_VERSION " " MOD_AUTHOR;
405 /* the usb driver itself (registered in hso_init) */
406 static struct usb_driver hso_driver;
407 /* serial structures */
408 static struct tty_driver *tty_drv;
409 static struct hso_device *serial_table[HSO_SERIAL_TTY_MINORS];
410 static struct hso_device *network_table[HSO_MAX_NET_DEVICES];
411 static spinlock_t serial_table_lock;
412 
413 static const s32 default_port_spec[] = {
414 	HSO_INTF_MUX | HSO_PORT_NETWORK,
415 	HSO_INTF_BULK | HSO_PORT_DIAG,
416 	HSO_INTF_BULK | HSO_PORT_MODEM,
417 	0
418 };
419 
420 static const s32 icon321_port_spec[] = {
421 	HSO_INTF_MUX | HSO_PORT_NETWORK,
422 	HSO_INTF_BULK | HSO_PORT_DIAG2,
423 	HSO_INTF_BULK | HSO_PORT_MODEM,
424 	HSO_INTF_BULK | HSO_PORT_DIAG,
425 	0
426 };
427 
428 #define default_port_device(vendor, product)	\
429 	USB_DEVICE(vendor, product),	\
430 		.driver_info = (kernel_ulong_t)default_port_spec
431 
432 #define icon321_port_device(vendor, product)	\
433 	USB_DEVICE(vendor, product),	\
434 		.driver_info = (kernel_ulong_t)icon321_port_spec
435 
436 /* list of devices we support */
437 static const struct usb_device_id hso_ids[] = {
438 	{default_port_device(0x0af0, 0x6711)},
439 	{default_port_device(0x0af0, 0x6731)},
440 	{default_port_device(0x0af0, 0x6751)},
441 	{default_port_device(0x0af0, 0x6771)},
442 	{default_port_device(0x0af0, 0x6791)},
443 	{default_port_device(0x0af0, 0x6811)},
444 	{default_port_device(0x0af0, 0x6911)},
445 	{default_port_device(0x0af0, 0x6951)},
446 	{default_port_device(0x0af0, 0x6971)},
447 	{default_port_device(0x0af0, 0x7011)},
448 	{default_port_device(0x0af0, 0x7031)},
449 	{default_port_device(0x0af0, 0x7051)},
450 	{default_port_device(0x0af0, 0x7071)},
451 	{default_port_device(0x0af0, 0x7111)},
452 	{default_port_device(0x0af0, 0x7211)},
453 	{default_port_device(0x0af0, 0x7251)},
454 	{default_port_device(0x0af0, 0x7271)},
455 	{default_port_device(0x0af0, 0x7311)},
456 	{default_port_device(0x0af0, 0xc031)},	/* Icon-Edge */
457 	{icon321_port_device(0x0af0, 0xd013)},	/* Module HSxPA */
458 	{icon321_port_device(0x0af0, 0xd031)},	/* Icon-321 */
459 	{icon321_port_device(0x0af0, 0xd033)},	/* Icon-322 */
460 	{USB_DEVICE(0x0af0, 0x7301)},		/* GE40x */
461 	{USB_DEVICE(0x0af0, 0x7361)},		/* GE40x */
462 	{USB_DEVICE(0x0af0, 0x7381)},		/* GE40x */
463 	{USB_DEVICE(0x0af0, 0x7401)},		/* GI 0401 */
464 	{USB_DEVICE(0x0af0, 0x7501)},		/* GTM 382 */
465 	{USB_DEVICE(0x0af0, 0x7601)},		/* GE40x */
466 	{USB_DEVICE(0x0af0, 0x7701)},
467 	{USB_DEVICE(0x0af0, 0x7706)},
468 	{USB_DEVICE(0x0af0, 0x7801)},
469 	{USB_DEVICE(0x0af0, 0x7901)},
470 	{USB_DEVICE(0x0af0, 0x7A01)},
471 	{USB_DEVICE(0x0af0, 0x7A05)},
472 	{USB_DEVICE(0x0af0, 0x8200)},
473 	{USB_DEVICE(0x0af0, 0x8201)},
474 	{USB_DEVICE(0x0af0, 0x8300)},
475 	{USB_DEVICE(0x0af0, 0x8302)},
476 	{USB_DEVICE(0x0af0, 0x8304)},
477 	{USB_DEVICE(0x0af0, 0x8400)},
478 	{USB_DEVICE(0x0af0, 0x8600)},
479 	{USB_DEVICE(0x0af0, 0x8800)},
480 	{USB_DEVICE(0x0af0, 0x8900)},
481 	{USB_DEVICE(0x0af0, 0xd035)},
482 	{USB_DEVICE(0x0af0, 0xd055)},
483 	{USB_DEVICE(0x0af0, 0xd155)},
484 	{USB_DEVICE(0x0af0, 0xd255)},
485 	{USB_DEVICE(0x0af0, 0xd057)},
486 	{USB_DEVICE(0x0af0, 0xd157)},
487 	{USB_DEVICE(0x0af0, 0xd257)},
488 	{USB_DEVICE(0x0af0, 0xd357)},
489 	{USB_DEVICE(0x0af0, 0xd058)},
490 	{USB_DEVICE(0x0af0, 0xc100)},
491 	{}
492 };
493 MODULE_DEVICE_TABLE(usb, hso_ids);
494 
495 /* Sysfs attribute */
496 static ssize_t hso_sysfs_show_porttype(struct device *dev,
497 				       struct device_attribute *attr,
498 				       char *buf)
499 {
500 	struct hso_device *hso_dev = dev_get_drvdata(dev);
501 	char *port_name;
502 
503 	if (!hso_dev)
504 		return 0;
505 
506 	switch (hso_dev->port_spec & HSO_PORT_MASK) {
507 	case HSO_PORT_CONTROL:
508 		port_name = "Control";
509 		break;
510 	case HSO_PORT_APP:
511 		port_name = "Application";
512 		break;
513 	case HSO_PORT_APP2:
514 		port_name = "Application2";
515 		break;
516 	case HSO_PORT_GPS:
517 		port_name = "GPS";
518 		break;
519 	case HSO_PORT_GPS_CONTROL:
520 		port_name = "GPS Control";
521 		break;
522 	case HSO_PORT_PCSC:
523 		port_name = "PCSC";
524 		break;
525 	case HSO_PORT_DIAG:
526 		port_name = "Diagnostic";
527 		break;
528 	case HSO_PORT_DIAG2:
529 		port_name = "Diagnostic2";
530 		break;
531 	case HSO_PORT_MODEM:
532 		port_name = "Modem";
533 		break;
534 	case HSO_PORT_NETWORK:
535 		port_name = "Network";
536 		break;
537 	default:
538 		port_name = "Unknown";
539 		break;
540 	}
541 
542 	return sprintf(buf, "%s\n", port_name);
543 }
544 static DEVICE_ATTR(hsotype, S_IRUGO, hso_sysfs_show_porttype, NULL);
545 
546 static int hso_urb_to_index(struct hso_serial *serial, struct urb *urb)
547 {
548 	int idx;
549 
550 	for (idx = 0; idx < serial->num_rx_urbs; idx++)
551 		if (serial->rx_urb[idx] == urb)
552 			return idx;
553 	dev_err(serial->parent->dev, "hso_urb_to_index failed\n");
554 	return -1;
555 }
556 
557 /* converts mux value to a port spec value */
558 static u32 hso_mux_to_port(int mux)
559 {
560 	u32 result;
561 
562 	switch (mux) {
563 	case 0x1:
564 		result = HSO_PORT_CONTROL;
565 		break;
566 	case 0x2:
567 		result = HSO_PORT_APP;
568 		break;
569 	case 0x4:
570 		result = HSO_PORT_PCSC;
571 		break;
572 	case 0x8:
573 		result = HSO_PORT_GPS;
574 		break;
575 	case 0x10:
576 		result = HSO_PORT_APP2;
577 		break;
578 	default:
579 		result = HSO_PORT_NO_PORT;
580 	}
581 	return result;
582 }
583 
584 /* converts port spec value to a mux value */
585 static u32 hso_port_to_mux(int port)
586 {
587 	u32 result;
588 
589 	switch (port & HSO_PORT_MASK) {
590 	case HSO_PORT_CONTROL:
591 		result = 0x0;
592 		break;
593 	case HSO_PORT_APP:
594 		result = 0x1;
595 		break;
596 	case HSO_PORT_PCSC:
597 		result = 0x2;
598 		break;
599 	case HSO_PORT_GPS:
600 		result = 0x3;
601 		break;
602 	case HSO_PORT_APP2:
603 		result = 0x4;
604 		break;
605 	default:
606 		result = 0x0;
607 	}
608 	return result;
609 }
610 
611 static struct hso_serial *get_serial_by_shared_int_and_type(
612 					struct hso_shared_int *shared_int,
613 					int mux)
614 {
615 	int i, port;
616 
617 	port = hso_mux_to_port(mux);
618 
619 	for (i = 0; i < HSO_SERIAL_TTY_MINORS; i++) {
620 		if (serial_table[i] &&
621 		    (dev2ser(serial_table[i])->shared_int == shared_int) &&
622 		    ((serial_table[i]->port_spec & HSO_PORT_MASK) == port)) {
623 			return dev2ser(serial_table[i]);
624 		}
625 	}
626 
627 	return NULL;
628 }
629 
630 static struct hso_serial *get_serial_by_index(unsigned index)
631 {
632 	struct hso_serial *serial = NULL;
633 	unsigned long flags;
634 
635 	spin_lock_irqsave(&serial_table_lock, flags);
636 	if (serial_table[index])
637 		serial = dev2ser(serial_table[index]);
638 	spin_unlock_irqrestore(&serial_table_lock, flags);
639 
640 	return serial;
641 }
642 
643 static int get_free_serial_index(void)
644 {
645 	int index;
646 	unsigned long flags;
647 
648 	spin_lock_irqsave(&serial_table_lock, flags);
649 	for (index = 0; index < HSO_SERIAL_TTY_MINORS; index++) {
650 		if (serial_table[index] == NULL) {
651 			spin_unlock_irqrestore(&serial_table_lock, flags);
652 			return index;
653 		}
654 	}
655 	spin_unlock_irqrestore(&serial_table_lock, flags);
656 
657 	printk(KERN_ERR "%s: no free serial devices in table\n", __func__);
658 	return -1;
659 }
660 
661 static void set_serial_by_index(unsigned index, struct hso_serial *serial)
662 {
663 	unsigned long flags;
664 
665 	spin_lock_irqsave(&serial_table_lock, flags);
666 	if (serial)
667 		serial_table[index] = serial->parent;
668 	else
669 		serial_table[index] = NULL;
670 	spin_unlock_irqrestore(&serial_table_lock, flags);
671 }
672 
673 static void handle_usb_error(int status, const char *function,
674 			     struct hso_device *hso_dev)
675 {
676 	char *explanation;
677 
678 	switch (status) {
679 	case -ENODEV:
680 		explanation = "no device";
681 		break;
682 	case -ENOENT:
683 		explanation = "endpoint not enabled";
684 		break;
685 	case -EPIPE:
686 		explanation = "endpoint stalled";
687 		break;
688 	case -ENOSPC:
689 		explanation = "not enough bandwidth";
690 		break;
691 	case -ESHUTDOWN:
692 		explanation = "device disabled";
693 		break;
694 	case -EHOSTUNREACH:
695 		explanation = "device suspended";
696 		break;
697 	case -EINVAL:
698 	case -EAGAIN:
699 	case -EFBIG:
700 	case -EMSGSIZE:
701 		explanation = "internal error";
702 		break;
703 	case -EILSEQ:
704 	case -EPROTO:
705 	case -ETIME:
706 	case -ETIMEDOUT:
707 		explanation = "protocol error";
708 		if (hso_dev)
709 			schedule_work(&hso_dev->reset_device);
710 		break;
711 	default:
712 		explanation = "unknown status";
713 		break;
714 	}
715 
716 	/* log a meaningful explanation of an USB status */
717 	D1("%s: received USB status - %s (%d)", function, explanation, status);
718 }
719 
720 /* Network interface functions */
721 
722 /* called when net interface is brought up by ifconfig */
723 static int hso_net_open(struct net_device *net)
724 {
725 	struct hso_net *odev = netdev_priv(net);
726 	unsigned long flags = 0;
727 
728 	if (!odev) {
729 		dev_err(&net->dev, "No net device !\n");
730 		return -ENODEV;
731 	}
732 
733 	odev->skb_tx_buf = NULL;
734 
735 	/* setup environment */
736 	spin_lock_irqsave(&odev->net_lock, flags);
737 	odev->rx_parse_state = WAIT_IP;
738 	odev->rx_buf_size = 0;
739 	odev->rx_buf_missing = sizeof(struct iphdr);
740 	spin_unlock_irqrestore(&odev->net_lock, flags);
741 
742 	/* We are up and running. */
743 	set_bit(HSO_NET_RUNNING, &odev->flags);
744 	hso_start_net_device(odev->parent);
745 
746 	/* Tell the kernel we are ready to start receiving from it */
747 	netif_start_queue(net);
748 
749 	return 0;
750 }
751 
752 /* called when interface is brought down by ifconfig */
753 static int hso_net_close(struct net_device *net)
754 {
755 	struct hso_net *odev = netdev_priv(net);
756 
757 	/* we don't need the queue anymore */
758 	netif_stop_queue(net);
759 	/* no longer running */
760 	clear_bit(HSO_NET_RUNNING, &odev->flags);
761 
762 	hso_stop_net_device(odev->parent);
763 
764 	/* done */
765 	return 0;
766 }
767 
768 /* USB tells is xmit done, we should start the netqueue again */
769 static void write_bulk_callback(struct urb *urb)
770 {
771 	struct hso_net *odev = urb->context;
772 	int status = urb->status;
773 
774 	/* Sanity check */
775 	if (!odev || !test_bit(HSO_NET_RUNNING, &odev->flags)) {
776 		dev_err(&urb->dev->dev, "%s: device not running\n", __func__);
777 		return;
778 	}
779 
780 	/* Do we still have a valid kernel network device? */
781 	if (!netif_device_present(odev->net)) {
782 		dev_err(&urb->dev->dev, "%s: net device not present\n",
783 			__func__);
784 		return;
785 	}
786 
787 	/* log status, but don't act on it, we don't need to resubmit anything
788 	 * anyhow */
789 	if (status)
790 		handle_usb_error(status, __func__, odev->parent);
791 
792 	hso_put_activity(odev->parent);
793 
794 	/* Tell the network interface we are ready for another frame */
795 	netif_wake_queue(odev->net);
796 }
797 
798 /* called by kernel when we need to transmit a packet */
799 static netdev_tx_t hso_net_start_xmit(struct sk_buff *skb,
800 					    struct net_device *net)
801 {
802 	struct hso_net *odev = netdev_priv(net);
803 	int result;
804 
805 	/* Tell the kernel, "No more frames 'til we are done with this one." */
806 	netif_stop_queue(net);
807 	if (hso_get_activity(odev->parent) == -EAGAIN) {
808 		odev->skb_tx_buf = skb;
809 		return NETDEV_TX_OK;
810 	}
811 
812 	/* log if asked */
813 	DUMP1(skb->data, skb->len);
814 	/* Copy it from kernel memory to OUR memory */
815 	memcpy(odev->mux_bulk_tx_buf, skb->data, skb->len);
816 	D1("len: %d/%d", skb->len, MUX_BULK_TX_BUF_SIZE);
817 
818 	/* Fill in the URB for shipping it out. */
819 	usb_fill_bulk_urb(odev->mux_bulk_tx_urb,
820 			  odev->parent->usb,
821 			  usb_sndbulkpipe(odev->parent->usb,
822 					  odev->out_endp->
823 					  bEndpointAddress & 0x7F),
824 			  odev->mux_bulk_tx_buf, skb->len, write_bulk_callback,
825 			  odev);
826 
827 	/* Deal with the Zero Length packet problem, I hope */
828 	odev->mux_bulk_tx_urb->transfer_flags |= URB_ZERO_PACKET;
829 
830 	/* Send the URB on its merry way. */
831 	result = usb_submit_urb(odev->mux_bulk_tx_urb, GFP_ATOMIC);
832 	if (result) {
833 		dev_warn(&odev->parent->interface->dev,
834 			"failed mux_bulk_tx_urb %d\n", result);
835 		net->stats.tx_errors++;
836 		netif_start_queue(net);
837 	} else {
838 		net->stats.tx_packets++;
839 		net->stats.tx_bytes += skb->len;
840 	}
841 	dev_kfree_skb(skb);
842 	/* we're done */
843 	return NETDEV_TX_OK;
844 }
845 
846 static void hso_get_drvinfo(struct net_device *net, struct ethtool_drvinfo *info)
847 {
848 	struct hso_net *odev = netdev_priv(net);
849 
850 	strncpy(info->driver, driver_name, ETHTOOL_BUSINFO_LEN);
851 	strncpy(info->version, DRIVER_VERSION, ETHTOOL_BUSINFO_LEN);
852 	usb_make_path(odev->parent->usb, info->bus_info, sizeof info->bus_info);
853 }
854 
855 static const struct ethtool_ops ops = {
856 	.get_drvinfo = hso_get_drvinfo,
857 	.get_link = ethtool_op_get_link
858 };
859 
860 /* called when a packet did not ack after watchdogtimeout */
861 static void hso_net_tx_timeout(struct net_device *net)
862 {
863 	struct hso_net *odev = netdev_priv(net);
864 
865 	if (!odev)
866 		return;
867 
868 	/* Tell syslog we are hosed. */
869 	dev_warn(&net->dev, "Tx timed out.\n");
870 
871 	/* Tear the waiting frame off the list */
872 	if (odev->mux_bulk_tx_urb &&
873 	    (odev->mux_bulk_tx_urb->status == -EINPROGRESS))
874 		usb_unlink_urb(odev->mux_bulk_tx_urb);
875 
876 	/* Update statistics */
877 	net->stats.tx_errors++;
878 }
879 
880 /* make a real packet from the received USB buffer */
881 static void packetizeRx(struct hso_net *odev, unsigned char *ip_pkt,
882 			unsigned int count, unsigned char is_eop)
883 {
884 	unsigned short temp_bytes;
885 	unsigned short buffer_offset = 0;
886 	unsigned short frame_len;
887 	unsigned char *tmp_rx_buf;
888 
889 	/* log if needed */
890 	D1("Rx %d bytes", count);
891 	DUMP(ip_pkt, min(128, (int)count));
892 
893 	while (count) {
894 		switch (odev->rx_parse_state) {
895 		case WAIT_IP:
896 			/* waiting for IP header. */
897 			/* wanted bytes - size of ip header */
898 			temp_bytes =
899 			    (count <
900 			     odev->rx_buf_missing) ? count : odev->
901 			    rx_buf_missing;
902 
903 			memcpy(((unsigned char *)(&odev->rx_ip_hdr)) +
904 			       odev->rx_buf_size, ip_pkt + buffer_offset,
905 			       temp_bytes);
906 
907 			odev->rx_buf_size += temp_bytes;
908 			buffer_offset += temp_bytes;
909 			odev->rx_buf_missing -= temp_bytes;
910 			count -= temp_bytes;
911 
912 			if (!odev->rx_buf_missing) {
913 				/* header is complete allocate an sk_buffer and
914 				 * continue to WAIT_DATA */
915 				frame_len = ntohs(odev->rx_ip_hdr.tot_len);
916 
917 				if ((frame_len > DEFAULT_MRU) ||
918 				    (frame_len < sizeof(struct iphdr))) {
919 					dev_err(&odev->net->dev,
920 						"Invalid frame (%d) length\n",
921 						frame_len);
922 					odev->rx_parse_state = WAIT_SYNC;
923 					continue;
924 				}
925 				/* Allocate an sk_buff */
926 				odev->skb_rx_buf = netdev_alloc_skb(odev->net,
927 								    frame_len);
928 				if (!odev->skb_rx_buf) {
929 					/* We got no receive buffer. */
930 					D1("could not allocate memory");
931 					odev->rx_parse_state = WAIT_SYNC;
932 					return;
933 				}
934 
935 				/* Copy what we got so far. make room for iphdr
936 				 * after tail. */
937 				tmp_rx_buf =
938 				    skb_put(odev->skb_rx_buf,
939 					    sizeof(struct iphdr));
940 				memcpy(tmp_rx_buf, (char *)&(odev->rx_ip_hdr),
941 				       sizeof(struct iphdr));
942 
943 				/* ETH_HLEN */
944 				odev->rx_buf_size = sizeof(struct iphdr);
945 
946 				/* Filip actually use .tot_len */
947 				odev->rx_buf_missing =
948 				    frame_len - sizeof(struct iphdr);
949 				odev->rx_parse_state = WAIT_DATA;
950 			}
951 			break;
952 
953 		case WAIT_DATA:
954 			temp_bytes = (count < odev->rx_buf_missing)
955 					? count : odev->rx_buf_missing;
956 
957 			/* Copy the rest of the bytes that are left in the
958 			 * buffer into the waiting sk_buf. */
959 			/* Make room for temp_bytes after tail. */
960 			tmp_rx_buf = skb_put(odev->skb_rx_buf, temp_bytes);
961 			memcpy(tmp_rx_buf, ip_pkt + buffer_offset, temp_bytes);
962 
963 			odev->rx_buf_missing -= temp_bytes;
964 			count -= temp_bytes;
965 			buffer_offset += temp_bytes;
966 			odev->rx_buf_size += temp_bytes;
967 			if (!odev->rx_buf_missing) {
968 				/* Packet is complete. Inject into stack. */
969 				/* We have IP packet here */
970 				odev->skb_rx_buf->protocol = cpu_to_be16(ETH_P_IP);
971 				/* don't check it */
972 				odev->skb_rx_buf->ip_summed =
973 					CHECKSUM_UNNECESSARY;
974 
975 				skb_reset_mac_header(odev->skb_rx_buf);
976 
977 				/* Ship it off to the kernel */
978 				netif_rx(odev->skb_rx_buf);
979 				/* No longer our buffer. */
980 				odev->skb_rx_buf = NULL;
981 
982 				/* update out statistics */
983 				odev->net->stats.rx_packets++;
984 
985 				odev->net->stats.rx_bytes += odev->rx_buf_size;
986 
987 				odev->rx_buf_size = 0;
988 				odev->rx_buf_missing = sizeof(struct iphdr);
989 				odev->rx_parse_state = WAIT_IP;
990 			}
991 			break;
992 
993 		case WAIT_SYNC:
994 			D1(" W_S");
995 			count = 0;
996 			break;
997 		default:
998 			D1(" ");
999 			count--;
1000 			break;
1001 		}
1002 	}
1003 
1004 	/* Recovery mechanism for WAIT_SYNC state. */
1005 	if (is_eop) {
1006 		if (odev->rx_parse_state == WAIT_SYNC) {
1007 			odev->rx_parse_state = WAIT_IP;
1008 			odev->rx_buf_size = 0;
1009 			odev->rx_buf_missing = sizeof(struct iphdr);
1010 		}
1011 	}
1012 }
1013 
1014 /* Moving data from usb to kernel (in interrupt state) */
1015 static void read_bulk_callback(struct urb *urb)
1016 {
1017 	struct hso_net *odev = urb->context;
1018 	struct net_device *net;
1019 	int result;
1020 	int status = urb->status;
1021 
1022 	/* is al ok?  (Filip: Who's Al ?) */
1023 	if (status) {
1024 		handle_usb_error(status, __func__, odev->parent);
1025 		return;
1026 	}
1027 
1028 	/* Sanity check */
1029 	if (!odev || !test_bit(HSO_NET_RUNNING, &odev->flags)) {
1030 		D1("BULK IN callback but driver is not active!");
1031 		return;
1032 	}
1033 	usb_mark_last_busy(urb->dev);
1034 
1035 	net = odev->net;
1036 
1037 	if (!netif_device_present(net)) {
1038 		/* Somebody killed our network interface... */
1039 		return;
1040 	}
1041 
1042 	if (odev->parent->port_spec & HSO_INFO_CRC_BUG) {
1043 		u32 rest;
1044 		u8 crc_check[4] = { 0xDE, 0xAD, 0xBE, 0xEF };
1045 		rest = urb->actual_length %
1046 			le16_to_cpu(odev->in_endp->wMaxPacketSize);
1047 		if (((rest == 5) || (rest == 6)) &&
1048 		    !memcmp(((u8 *) urb->transfer_buffer) +
1049 			    urb->actual_length - 4, crc_check, 4)) {
1050 			urb->actual_length -= 4;
1051 		}
1052 	}
1053 
1054 	/* do we even have a packet? */
1055 	if (urb->actual_length) {
1056 		/* Handle the IP stream, add header and push it onto network
1057 		 * stack if the packet is complete. */
1058 		spin_lock(&odev->net_lock);
1059 		packetizeRx(odev, urb->transfer_buffer, urb->actual_length,
1060 			    (urb->transfer_buffer_length >
1061 			     urb->actual_length) ? 1 : 0);
1062 		spin_unlock(&odev->net_lock);
1063 	}
1064 
1065 	/* We are done with this URB, resubmit it. Prep the USB to wait for
1066 	 * another frame. Reuse same as received. */
1067 	usb_fill_bulk_urb(urb,
1068 			  odev->parent->usb,
1069 			  usb_rcvbulkpipe(odev->parent->usb,
1070 					  odev->in_endp->
1071 					  bEndpointAddress & 0x7F),
1072 			  urb->transfer_buffer, MUX_BULK_RX_BUF_SIZE,
1073 			  read_bulk_callback, odev);
1074 
1075 	/* Give this to the USB subsystem so it can tell us when more data
1076 	 * arrives. */
1077 	result = usb_submit_urb(urb, GFP_ATOMIC);
1078 	if (result)
1079 		dev_warn(&odev->parent->interface->dev,
1080 			 "%s failed submit mux_bulk_rx_urb %d\n", __func__,
1081 			 result);
1082 }
1083 
1084 /* Serial driver functions */
1085 
1086 static void hso_init_termios(struct ktermios *termios)
1087 {
1088 	/*
1089 	 * The default requirements for this device are:
1090 	 */
1091 	termios->c_iflag &=
1092 		~(IGNBRK	/* disable ignore break */
1093 		| BRKINT	/* disable break causes interrupt */
1094 		| PARMRK	/* disable mark parity errors */
1095 		| ISTRIP	/* disable clear high bit of input characters */
1096 		| INLCR		/* disable translate NL to CR */
1097 		| IGNCR		/* disable ignore CR */
1098 		| ICRNL		/* disable translate CR to NL */
1099 		| IXON);	/* disable enable XON/XOFF flow control */
1100 
1101 	/* disable postprocess output characters */
1102 	termios->c_oflag &= ~OPOST;
1103 
1104 	termios->c_lflag &=
1105 		~(ECHO		/* disable echo input characters */
1106 		| ECHONL	/* disable echo new line */
1107 		| ICANON	/* disable erase, kill, werase, and rprnt
1108 				   special characters */
1109 		| ISIG		/* disable interrupt, quit, and suspend special
1110 				   characters */
1111 		| IEXTEN);	/* disable non-POSIX special characters */
1112 
1113 	termios->c_cflag &=
1114 		~(CSIZE		/* no size */
1115 		| PARENB	/* disable parity bit */
1116 		| CBAUD		/* clear current baud rate */
1117 		| CBAUDEX);	/* clear current buad rate */
1118 
1119 	termios->c_cflag |= CS8;	/* character size 8 bits */
1120 
1121 	/* baud rate 115200 */
1122 	tty_termios_encode_baud_rate(termios, 115200, 115200);
1123 }
1124 
1125 static void _hso_serial_set_termios(struct tty_struct *tty,
1126 				    struct ktermios *old)
1127 {
1128 	struct hso_serial *serial = get_serial_by_tty(tty);
1129 	struct ktermios *termios;
1130 
1131 	if (!serial) {
1132 		printk(KERN_ERR "%s: no tty structures", __func__);
1133 		return;
1134 	}
1135 
1136 	D4("port %d", serial->minor);
1137 
1138 	/*
1139 	 *	Fix up unsupported bits
1140 	 */
1141 	termios = tty->termios;
1142 	termios->c_iflag &= ~IXON; /* disable enable XON/XOFF flow control */
1143 
1144 	termios->c_cflag &=
1145 		~(CSIZE		/* no size */
1146 		| PARENB	/* disable parity bit */
1147 		| CBAUD		/* clear current baud rate */
1148 		| CBAUDEX);	/* clear current buad rate */
1149 
1150 	termios->c_cflag |= CS8;	/* character size 8 bits */
1151 
1152 	/* baud rate 115200 */
1153 	tty_encode_baud_rate(tty, 115200, 115200);
1154 }
1155 
1156 static void hso_resubmit_rx_bulk_urb(struct hso_serial *serial, struct urb *urb)
1157 {
1158 	int result;
1159 	/* We are done with this URB, resubmit it. Prep the USB to wait for
1160 	 * another frame */
1161 	usb_fill_bulk_urb(urb, serial->parent->usb,
1162 			  usb_rcvbulkpipe(serial->parent->usb,
1163 					  serial->in_endp->
1164 					  bEndpointAddress & 0x7F),
1165 			  urb->transfer_buffer, serial->rx_data_length,
1166 			  hso_std_serial_read_bulk_callback, serial);
1167 	/* Give this to the USB subsystem so it can tell us when more data
1168 	 * arrives. */
1169 	result = usb_submit_urb(urb, GFP_ATOMIC);
1170 	if (result) {
1171 		dev_err(&urb->dev->dev, "%s failed submit serial rx_urb %d\n",
1172 			__func__, result);
1173 	}
1174 }
1175 
1176 
1177 
1178 
1179 static void put_rxbuf_data_and_resubmit_bulk_urb(struct hso_serial *serial)
1180 {
1181 	int count;
1182 	struct urb *curr_urb;
1183 
1184 	while (serial->rx_urb_filled[serial->curr_rx_urb_idx]) {
1185 		curr_urb = serial->rx_urb[serial->curr_rx_urb_idx];
1186 		count = put_rxbuf_data(curr_urb, serial);
1187 		if (count == -1)
1188 			return;
1189 		if (count == 0) {
1190 			serial->curr_rx_urb_idx++;
1191 			if (serial->curr_rx_urb_idx >= serial->num_rx_urbs)
1192 				serial->curr_rx_urb_idx = 0;
1193 			hso_resubmit_rx_bulk_urb(serial, curr_urb);
1194 		}
1195 	}
1196 }
1197 
1198 static void put_rxbuf_data_and_resubmit_ctrl_urb(struct hso_serial *serial)
1199 {
1200 	int count = 0;
1201 	struct urb *urb;
1202 
1203 	urb = serial->rx_urb[0];
1204 	if (serial->open_count > 0) {
1205 		count = put_rxbuf_data(urb, serial);
1206 		if (count == -1)
1207 			return;
1208 	}
1209 	/* Re issue a read as long as we receive data. */
1210 
1211 	if (count == 0 && ((urb->actual_length != 0) ||
1212 			   (serial->rx_state == RX_PENDING))) {
1213 		serial->rx_state = RX_SENT;
1214 		hso_mux_serial_read(serial);
1215 	} else
1216 		serial->rx_state = RX_IDLE;
1217 }
1218 
1219 
1220 /* read callback for Diag and CS port */
1221 static void hso_std_serial_read_bulk_callback(struct urb *urb)
1222 {
1223 	struct hso_serial *serial = urb->context;
1224 	int status = urb->status;
1225 
1226 	/* sanity check */
1227 	if (!serial) {
1228 		D1("serial == NULL");
1229 		return;
1230 	} else if (status) {
1231 		handle_usb_error(status, __func__, serial->parent);
1232 		return;
1233 	}
1234 
1235 	D4("\n--- Got serial_read_bulk callback %02x ---", status);
1236 	D1("Actual length = %d\n", urb->actual_length);
1237 	DUMP1(urb->transfer_buffer, urb->actual_length);
1238 
1239 	/* Anyone listening? */
1240 	if (serial->open_count == 0)
1241 		return;
1242 
1243 	if (status == 0) {
1244 		if (serial->parent->port_spec & HSO_INFO_CRC_BUG) {
1245 			u32 rest;
1246 			u8 crc_check[4] = { 0xDE, 0xAD, 0xBE, 0xEF };
1247 			rest =
1248 			    urb->actual_length %
1249 			    le16_to_cpu(serial->in_endp->wMaxPacketSize);
1250 			if (((rest == 5) || (rest == 6)) &&
1251 			    !memcmp(((u8 *) urb->transfer_buffer) +
1252 				    urb->actual_length - 4, crc_check, 4)) {
1253 				urb->actual_length -= 4;
1254 			}
1255 		}
1256 		/* Valid data, handle RX data */
1257 		spin_lock(&serial->serial_lock);
1258 		serial->rx_urb_filled[hso_urb_to_index(serial, urb)] = 1;
1259 		put_rxbuf_data_and_resubmit_bulk_urb(serial);
1260 		spin_unlock(&serial->serial_lock);
1261 	} else if (status == -ENOENT || status == -ECONNRESET) {
1262 		/* Unlinked - check for throttled port. */
1263 		D2("Port %d, successfully unlinked urb", serial->minor);
1264 		spin_lock(&serial->serial_lock);
1265 		serial->rx_urb_filled[hso_urb_to_index(serial, urb)] = 0;
1266 		hso_resubmit_rx_bulk_urb(serial, urb);
1267 		spin_unlock(&serial->serial_lock);
1268 	} else {
1269 		D2("Port %d, status = %d for read urb", serial->minor, status);
1270 		return;
1271 	}
1272 }
1273 
1274 /*
1275  * This needs to be a tasklet otherwise we will
1276  * end up recursively calling this function.
1277  */
1278 static void hso_unthrottle_tasklet(struct hso_serial *serial)
1279 {
1280 	unsigned long flags;
1281 
1282 	spin_lock_irqsave(&serial->serial_lock, flags);
1283 	if ((serial->parent->port_spec & HSO_INTF_MUX))
1284 		put_rxbuf_data_and_resubmit_ctrl_urb(serial);
1285 	else
1286 		put_rxbuf_data_and_resubmit_bulk_urb(serial);
1287 	spin_unlock_irqrestore(&serial->serial_lock, flags);
1288 }
1289 
1290 static	void hso_unthrottle(struct tty_struct *tty)
1291 {
1292 	struct hso_serial *serial = get_serial_by_tty(tty);
1293 
1294 	tasklet_hi_schedule(&serial->unthrottle_tasklet);
1295 }
1296 
1297 static void hso_unthrottle_workfunc(struct work_struct *work)
1298 {
1299 	struct hso_serial *serial =
1300 	    container_of(work, struct hso_serial,
1301 			 retry_unthrottle_workqueue);
1302 	hso_unthrottle_tasklet(serial);
1303 }
1304 
1305 /* open the requested serial port */
1306 static int hso_serial_open(struct tty_struct *tty, struct file *filp)
1307 {
1308 	struct hso_serial *serial = get_serial_by_index(tty->index);
1309 	int result;
1310 
1311 	/* sanity check */
1312 	if (serial == NULL || serial->magic != HSO_SERIAL_MAGIC) {
1313 		WARN_ON(1);
1314 		tty->driver_data = NULL;
1315 		D1("Failed to open port");
1316 		return -ENODEV;
1317 	}
1318 
1319 	mutex_lock(&serial->parent->mutex);
1320 	result = usb_autopm_get_interface(serial->parent->interface);
1321 	if (result < 0)
1322 		goto err_out;
1323 
1324 	D1("Opening %d", serial->minor);
1325 	kref_get(&serial->parent->ref);
1326 
1327 	/* setup */
1328 	spin_lock_irq(&serial->serial_lock);
1329 	tty->driver_data = serial;
1330 	tty_kref_put(serial->tty);
1331 	serial->tty = tty_kref_get(tty);
1332 	spin_unlock_irq(&serial->serial_lock);
1333 
1334 	/* check for port already opened, if not set the termios */
1335 	serial->open_count++;
1336 	if (serial->open_count == 1) {
1337 		serial->rx_state = RX_IDLE;
1338 		/* Force default termio settings */
1339 		_hso_serial_set_termios(tty, NULL);
1340 		tasklet_init(&serial->unthrottle_tasklet,
1341 			     (void (*)(unsigned long))hso_unthrottle_tasklet,
1342 			     (unsigned long)serial);
1343 		INIT_WORK(&serial->retry_unthrottle_workqueue,
1344 			  hso_unthrottle_workfunc);
1345 		result = hso_start_serial_device(serial->parent, GFP_KERNEL);
1346 		if (result) {
1347 			hso_stop_serial_device(serial->parent);
1348 			serial->open_count--;
1349 			kref_put(&serial->parent->ref, hso_serial_ref_free);
1350 		}
1351 	} else {
1352 		D1("Port was already open");
1353 	}
1354 
1355 	usb_autopm_put_interface(serial->parent->interface);
1356 
1357 	/* done */
1358 	if (result)
1359 		hso_serial_tiocmset(tty, NULL, TIOCM_RTS | TIOCM_DTR, 0);
1360 err_out:
1361 	mutex_unlock(&serial->parent->mutex);
1362 	return result;
1363 }
1364 
1365 /* close the requested serial port */
1366 static void hso_serial_close(struct tty_struct *tty, struct file *filp)
1367 {
1368 	struct hso_serial *serial = tty->driver_data;
1369 	u8 usb_gone;
1370 
1371 	D1("Closing serial port");
1372 
1373 	/* Open failed, no close cleanup required */
1374 	if (serial == NULL)
1375 		return;
1376 
1377 	mutex_lock(&serial->parent->mutex);
1378 	usb_gone = serial->parent->usb_gone;
1379 
1380 	if (!usb_gone)
1381 		usb_autopm_get_interface(serial->parent->interface);
1382 
1383 	/* reset the rts and dtr */
1384 	/* do the actual close */
1385 	serial->open_count--;
1386 
1387 	if (serial->open_count <= 0) {
1388 		serial->open_count = 0;
1389 		spin_lock_irq(&serial->serial_lock);
1390 		if (serial->tty == tty) {
1391 			serial->tty->driver_data = NULL;
1392 			serial->tty = NULL;
1393 			tty_kref_put(tty);
1394 		}
1395 		spin_unlock_irq(&serial->serial_lock);
1396 		if (!usb_gone)
1397 			hso_stop_serial_device(serial->parent);
1398 		tasklet_kill(&serial->unthrottle_tasklet);
1399 		cancel_work_sync(&serial->retry_unthrottle_workqueue);
1400 	}
1401 
1402 	if (!usb_gone)
1403 		usb_autopm_put_interface(serial->parent->interface);
1404 
1405 	mutex_unlock(&serial->parent->mutex);
1406 
1407 	kref_put(&serial->parent->ref, hso_serial_ref_free);
1408 }
1409 
1410 /* close the requested serial port */
1411 static int hso_serial_write(struct tty_struct *tty, const unsigned char *buf,
1412 			    int count)
1413 {
1414 	struct hso_serial *serial = get_serial_by_tty(tty);
1415 	int space, tx_bytes;
1416 	unsigned long flags;
1417 
1418 	/* sanity check */
1419 	if (serial == NULL) {
1420 		printk(KERN_ERR "%s: serial is NULL\n", __func__);
1421 		return -ENODEV;
1422 	}
1423 
1424 	spin_lock_irqsave(&serial->serial_lock, flags);
1425 
1426 	space = serial->tx_data_length - serial->tx_buffer_count;
1427 	tx_bytes = (count < space) ? count : space;
1428 
1429 	if (!tx_bytes)
1430 		goto out;
1431 
1432 	memcpy(serial->tx_buffer + serial->tx_buffer_count, buf, tx_bytes);
1433 	serial->tx_buffer_count += tx_bytes;
1434 
1435 out:
1436 	spin_unlock_irqrestore(&serial->serial_lock, flags);
1437 
1438 	hso_kick_transmit(serial);
1439 	/* done */
1440 	return tx_bytes;
1441 }
1442 
1443 /* how much room is there for writing */
1444 static int hso_serial_write_room(struct tty_struct *tty)
1445 {
1446 	struct hso_serial *serial = get_serial_by_tty(tty);
1447 	int room;
1448 	unsigned long flags;
1449 
1450 	spin_lock_irqsave(&serial->serial_lock, flags);
1451 	room = serial->tx_data_length - serial->tx_buffer_count;
1452 	spin_unlock_irqrestore(&serial->serial_lock, flags);
1453 
1454 	/* return free room */
1455 	return room;
1456 }
1457 
1458 /* setup the term */
1459 static void hso_serial_set_termios(struct tty_struct *tty, struct ktermios *old)
1460 {
1461 	struct hso_serial *serial = get_serial_by_tty(tty);
1462 	unsigned long flags;
1463 
1464 	if (old)
1465 		D5("Termios called with: cflags new[%d] - old[%d]",
1466 		   tty->termios->c_cflag, old->c_cflag);
1467 
1468 	/* the actual setup */
1469 	spin_lock_irqsave(&serial->serial_lock, flags);
1470 	if (serial->open_count)
1471 		_hso_serial_set_termios(tty, old);
1472 	else
1473 		tty->termios = old;
1474 	spin_unlock_irqrestore(&serial->serial_lock, flags);
1475 
1476 	/* done */
1477 }
1478 
1479 /* how many characters in the buffer */
1480 static int hso_serial_chars_in_buffer(struct tty_struct *tty)
1481 {
1482 	struct hso_serial *serial = get_serial_by_tty(tty);
1483 	int chars;
1484 	unsigned long flags;
1485 
1486 	/* sanity check */
1487 	if (serial == NULL)
1488 		return 0;
1489 
1490 	spin_lock_irqsave(&serial->serial_lock, flags);
1491 	chars = serial->tx_buffer_count;
1492 	spin_unlock_irqrestore(&serial->serial_lock, flags);
1493 
1494 	return chars;
1495 }
1496 static int tiocmget_submit_urb(struct hso_serial *serial,
1497 			       struct hso_tiocmget *tiocmget,
1498 			       struct usb_device *usb)
1499 {
1500 	int result;
1501 
1502 	if (serial->parent->usb_gone)
1503 		return -ENODEV;
1504 	usb_fill_int_urb(tiocmget->urb, usb,
1505 			 usb_rcvintpipe(usb,
1506 					tiocmget->endp->
1507 					bEndpointAddress & 0x7F),
1508 			 &tiocmget->serial_state_notification,
1509 			 sizeof(struct hso_serial_state_notification),
1510 			 tiocmget_intr_callback, serial,
1511 			 tiocmget->endp->bInterval);
1512 	result = usb_submit_urb(tiocmget->urb, GFP_ATOMIC);
1513 	if (result) {
1514 		dev_warn(&usb->dev, "%s usb_submit_urb failed %d\n", __func__,
1515 			 result);
1516 	}
1517 	return result;
1518 
1519 }
1520 
1521 static void tiocmget_intr_callback(struct urb *urb)
1522 {
1523 	struct hso_serial *serial = urb->context;
1524 	struct hso_tiocmget *tiocmget;
1525 	int status = urb->status;
1526 	u16 UART_state_bitmap, prev_UART_state_bitmap;
1527 	struct uart_icount *icount;
1528 	struct hso_serial_state_notification *serial_state_notification;
1529 	struct usb_device *usb;
1530 
1531 	/* Sanity checks */
1532 	if (!serial)
1533 		return;
1534 	if (status) {
1535 		handle_usb_error(status, __func__, serial->parent);
1536 		return;
1537 	}
1538 	tiocmget = serial->tiocmget;
1539 	if (!tiocmget)
1540 		return;
1541 	usb = serial->parent->usb;
1542 	serial_state_notification = &tiocmget->serial_state_notification;
1543 	if (serial_state_notification->bmRequestType != BM_REQUEST_TYPE ||
1544 	    serial_state_notification->bNotification != B_NOTIFICATION ||
1545 	    le16_to_cpu(serial_state_notification->wValue) != W_VALUE ||
1546 	    le16_to_cpu(serial_state_notification->wIndex) != W_INDEX ||
1547 	    le16_to_cpu(serial_state_notification->wLength) != W_LENGTH) {
1548 		dev_warn(&usb->dev,
1549 			 "hso received invalid serial state notification\n");
1550 		DUMP(serial_state_notification,
1551 		     sizeof(struct hso_serial_state_notification));
1552 	} else {
1553 
1554 		UART_state_bitmap = le16_to_cpu(serial_state_notification->
1555 						UART_state_bitmap);
1556 		prev_UART_state_bitmap = tiocmget->prev_UART_state_bitmap;
1557 		icount = &tiocmget->icount;
1558 		spin_lock(&serial->serial_lock);
1559 		if ((UART_state_bitmap & B_OVERRUN) !=
1560 		   (prev_UART_state_bitmap & B_OVERRUN))
1561 			icount->parity++;
1562 		if ((UART_state_bitmap & B_PARITY) !=
1563 		   (prev_UART_state_bitmap & B_PARITY))
1564 			icount->parity++;
1565 		if ((UART_state_bitmap & B_FRAMING) !=
1566 		   (prev_UART_state_bitmap & B_FRAMING))
1567 			icount->frame++;
1568 		if ((UART_state_bitmap & B_RING_SIGNAL) &&
1569 		   !(prev_UART_state_bitmap & B_RING_SIGNAL))
1570 			icount->rng++;
1571 		if ((UART_state_bitmap & B_BREAK) !=
1572 		   (prev_UART_state_bitmap & B_BREAK))
1573 			icount->brk++;
1574 		if ((UART_state_bitmap & B_TX_CARRIER) !=
1575 		   (prev_UART_state_bitmap & B_TX_CARRIER))
1576 			icount->dsr++;
1577 		if ((UART_state_bitmap & B_RX_CARRIER) !=
1578 		   (prev_UART_state_bitmap & B_RX_CARRIER))
1579 			icount->dcd++;
1580 		tiocmget->prev_UART_state_bitmap = UART_state_bitmap;
1581 		spin_unlock(&serial->serial_lock);
1582 		tiocmget->intr_completed = 1;
1583 		wake_up_interruptible(&tiocmget->waitq);
1584 	}
1585 	memset(serial_state_notification, 0,
1586 	       sizeof(struct hso_serial_state_notification));
1587 	tiocmget_submit_urb(serial,
1588 			    tiocmget,
1589 			    serial->parent->usb);
1590 }
1591 
1592 /*
1593  * next few functions largely stolen from drivers/serial/serial_core.c
1594  */
1595 /* Wait for any of the 4 modem inputs (DCD,RI,DSR,CTS) to change
1596  * - mask passed in arg for lines of interest
1597  *   (use |'ed TIOCM_RNG/DSR/CD/CTS for masking)
1598  * Caller should use TIOCGICOUNT to see which one it was
1599  */
1600 static int
1601 hso_wait_modem_status(struct hso_serial *serial, unsigned long arg)
1602 {
1603 	DECLARE_WAITQUEUE(wait, current);
1604 	struct uart_icount cprev, cnow;
1605 	struct hso_tiocmget  *tiocmget;
1606 	int ret;
1607 
1608 	tiocmget = serial->tiocmget;
1609 	if (!tiocmget)
1610 		return -ENOENT;
1611 	/*
1612 	 * note the counters on entry
1613 	 */
1614 	spin_lock_irq(&serial->serial_lock);
1615 	memcpy(&cprev, &tiocmget->icount, sizeof(struct uart_icount));
1616 	spin_unlock_irq(&serial->serial_lock);
1617 	add_wait_queue(&tiocmget->waitq, &wait);
1618 	for (;;) {
1619 		spin_lock_irq(&serial->serial_lock);
1620 		memcpy(&cnow, &tiocmget->icount, sizeof(struct uart_icount));
1621 		spin_unlock_irq(&serial->serial_lock);
1622 		set_current_state(TASK_INTERRUPTIBLE);
1623 		if (((arg & TIOCM_RNG) && (cnow.rng != cprev.rng)) ||
1624 		    ((arg & TIOCM_DSR) && (cnow.dsr != cprev.dsr)) ||
1625 		    ((arg & TIOCM_CD)  && (cnow.dcd != cprev.dcd))) {
1626 			ret = 0;
1627 			break;
1628 		}
1629 		schedule();
1630 		/* see if a signal did it */
1631 		if (signal_pending(current)) {
1632 			ret = -ERESTARTSYS;
1633 			break;
1634 		}
1635 		cprev = cnow;
1636 	}
1637 	current->state = TASK_RUNNING;
1638 	remove_wait_queue(&tiocmget->waitq, &wait);
1639 
1640 	return ret;
1641 }
1642 
1643 /*
1644  * Get counter of input serial line interrupts (DCD,RI,DSR,CTS)
1645  * Return: write counters to the user passed counter struct
1646  * NB: both 1->0 and 0->1 transitions are counted except for
1647  *     RI where only 0->1 is counted.
1648  */
1649 static int hso_get_count(struct hso_serial *serial,
1650 			  struct serial_icounter_struct __user *icnt)
1651 {
1652 	struct serial_icounter_struct icount;
1653 	struct uart_icount cnow;
1654 	struct hso_tiocmget  *tiocmget = serial->tiocmget;
1655 
1656 	if (!tiocmget)
1657 		 return -ENOENT;
1658 	spin_lock_irq(&serial->serial_lock);
1659 	memcpy(&cnow, &tiocmget->icount, sizeof(struct uart_icount));
1660 	spin_unlock_irq(&serial->serial_lock);
1661 
1662 	icount.cts         = cnow.cts;
1663 	icount.dsr         = cnow.dsr;
1664 	icount.rng         = cnow.rng;
1665 	icount.dcd         = cnow.dcd;
1666 	icount.rx          = cnow.rx;
1667 	icount.tx          = cnow.tx;
1668 	icount.frame       = cnow.frame;
1669 	icount.overrun     = cnow.overrun;
1670 	icount.parity      = cnow.parity;
1671 	icount.brk         = cnow.brk;
1672 	icount.buf_overrun = cnow.buf_overrun;
1673 
1674 	return copy_to_user(icnt, &icount, sizeof(icount)) ? -EFAULT : 0;
1675 }
1676 
1677 
1678 static int hso_serial_tiocmget(struct tty_struct *tty, struct file *file)
1679 {
1680 	int retval;
1681 	struct hso_serial *serial = get_serial_by_tty(tty);
1682 	struct hso_tiocmget  *tiocmget;
1683 	u16 UART_state_bitmap;
1684 
1685 	/* sanity check */
1686 	if (!serial) {
1687 		D1("no tty structures");
1688 		return -EINVAL;
1689 	}
1690 	spin_lock_irq(&serial->serial_lock);
1691 	retval = ((serial->rts_state) ? TIOCM_RTS : 0) |
1692 	    ((serial->dtr_state) ? TIOCM_DTR : 0);
1693 	tiocmget = serial->tiocmget;
1694 	if (tiocmget) {
1695 
1696 		UART_state_bitmap = le16_to_cpu(
1697 			tiocmget->prev_UART_state_bitmap);
1698 		if (UART_state_bitmap & B_RING_SIGNAL)
1699 			retval |=  TIOCM_RNG;
1700 		if (UART_state_bitmap & B_RX_CARRIER)
1701 			retval |=  TIOCM_CD;
1702 		if (UART_state_bitmap & B_TX_CARRIER)
1703 			retval |=  TIOCM_DSR;
1704 	}
1705 	spin_unlock_irq(&serial->serial_lock);
1706 	return retval;
1707 }
1708 
1709 static int hso_serial_tiocmset(struct tty_struct *tty, struct file *file,
1710 			       unsigned int set, unsigned int clear)
1711 {
1712 	int val = 0;
1713 	unsigned long flags;
1714 	int if_num;
1715 	struct hso_serial *serial = get_serial_by_tty(tty);
1716 
1717 	/* sanity check */
1718 	if (!serial) {
1719 		D1("no tty structures");
1720 		return -EINVAL;
1721 	}
1722 
1723 	if ((serial->parent->port_spec & HSO_PORT_MASK) != HSO_PORT_MODEM)
1724 		return -EINVAL;
1725 
1726 	if_num = serial->parent->interface->altsetting->desc.bInterfaceNumber;
1727 
1728 	spin_lock_irqsave(&serial->serial_lock, flags);
1729 	if (set & TIOCM_RTS)
1730 		serial->rts_state = 1;
1731 	if (set & TIOCM_DTR)
1732 		serial->dtr_state = 1;
1733 
1734 	if (clear & TIOCM_RTS)
1735 		serial->rts_state = 0;
1736 	if (clear & TIOCM_DTR)
1737 		serial->dtr_state = 0;
1738 
1739 	if (serial->dtr_state)
1740 		val |= 0x01;
1741 	if (serial->rts_state)
1742 		val |= 0x02;
1743 
1744 	spin_unlock_irqrestore(&serial->serial_lock, flags);
1745 
1746 	return usb_control_msg(serial->parent->usb,
1747 			       usb_rcvctrlpipe(serial->parent->usb, 0), 0x22,
1748 			       0x21, val, if_num, NULL, 0,
1749 			       USB_CTRL_SET_TIMEOUT);
1750 }
1751 
1752 static int hso_serial_ioctl(struct tty_struct *tty, struct file *file,
1753 			    unsigned int cmd, unsigned long arg)
1754 {
1755 	struct hso_serial *serial =  get_serial_by_tty(tty);
1756 	void __user *uarg = (void __user *)arg;
1757 	int ret = 0;
1758 	D4("IOCTL cmd: %d, arg: %ld", cmd, arg);
1759 
1760 	if (!serial)
1761 		return -ENODEV;
1762 	switch (cmd) {
1763 	case TIOCMIWAIT:
1764 		ret = hso_wait_modem_status(serial, arg);
1765 		break;
1766 
1767 	case TIOCGICOUNT:
1768 		ret = hso_get_count(serial, uarg);
1769 		break;
1770 	default:
1771 		ret = -ENOIOCTLCMD;
1772 		break;
1773 	}
1774 	return ret;
1775 }
1776 
1777 
1778 /* starts a transmit */
1779 static void hso_kick_transmit(struct hso_serial *serial)
1780 {
1781 	u8 *temp;
1782 	unsigned long flags;
1783 	int res;
1784 
1785 	spin_lock_irqsave(&serial->serial_lock, flags);
1786 	if (!serial->tx_buffer_count)
1787 		goto out;
1788 
1789 	if (serial->tx_urb_used)
1790 		goto out;
1791 
1792 	/* Wakeup USB interface if necessary */
1793 	if (hso_get_activity(serial->parent) == -EAGAIN)
1794 		goto out;
1795 
1796 	/* Switch pointers around to avoid memcpy */
1797 	temp = serial->tx_buffer;
1798 	serial->tx_buffer = serial->tx_data;
1799 	serial->tx_data = temp;
1800 	serial->tx_data_count = serial->tx_buffer_count;
1801 	serial->tx_buffer_count = 0;
1802 
1803 	/* If temp is set, it means we switched buffers */
1804 	if (temp && serial->write_data) {
1805 		res = serial->write_data(serial);
1806 		if (res >= 0)
1807 			serial->tx_urb_used = 1;
1808 	}
1809 out:
1810 	spin_unlock_irqrestore(&serial->serial_lock, flags);
1811 }
1812 
1813 /* make a request (for reading and writing data to muxed serial port) */
1814 static int mux_device_request(struct hso_serial *serial, u8 type, u16 port,
1815 			      struct urb *ctrl_urb,
1816 			      struct usb_ctrlrequest *ctrl_req,
1817 			      u8 *ctrl_urb_data, u32 size)
1818 {
1819 	int result;
1820 	int pipe;
1821 
1822 	/* Sanity check */
1823 	if (!serial || !ctrl_urb || !ctrl_req) {
1824 		printk(KERN_ERR "%s: Wrong arguments\n", __func__);
1825 		return -EINVAL;
1826 	}
1827 
1828 	/* initialize */
1829 	ctrl_req->wValue = 0;
1830 	ctrl_req->wIndex = cpu_to_le16(hso_port_to_mux(port));
1831 	ctrl_req->wLength = cpu_to_le16(size);
1832 
1833 	if (type == USB_CDC_GET_ENCAPSULATED_RESPONSE) {
1834 		/* Reading command */
1835 		ctrl_req->bRequestType = USB_DIR_IN |
1836 					 USB_TYPE_OPTION_VENDOR |
1837 					 USB_RECIP_INTERFACE;
1838 		ctrl_req->bRequest = USB_CDC_GET_ENCAPSULATED_RESPONSE;
1839 		pipe = usb_rcvctrlpipe(serial->parent->usb, 0);
1840 	} else {
1841 		/* Writing command */
1842 		ctrl_req->bRequestType = USB_DIR_OUT |
1843 					 USB_TYPE_OPTION_VENDOR |
1844 					 USB_RECIP_INTERFACE;
1845 		ctrl_req->bRequest = USB_CDC_SEND_ENCAPSULATED_COMMAND;
1846 		pipe = usb_sndctrlpipe(serial->parent->usb, 0);
1847 	}
1848 	/* syslog */
1849 	D2("%s command (%02x) len: %d, port: %d",
1850 	   type == USB_CDC_GET_ENCAPSULATED_RESPONSE ? "Read" : "Write",
1851 	   ctrl_req->bRequestType, ctrl_req->wLength, port);
1852 
1853 	/* Load ctrl urb */
1854 	ctrl_urb->transfer_flags = 0;
1855 	usb_fill_control_urb(ctrl_urb,
1856 			     serial->parent->usb,
1857 			     pipe,
1858 			     (u8 *) ctrl_req,
1859 			     ctrl_urb_data, size, ctrl_callback, serial);
1860 	/* Send it on merry way */
1861 	result = usb_submit_urb(ctrl_urb, GFP_ATOMIC);
1862 	if (result) {
1863 		dev_err(&ctrl_urb->dev->dev,
1864 			"%s failed submit ctrl_urb %d type %d\n", __func__,
1865 			result, type);
1866 		return result;
1867 	}
1868 
1869 	/* done */
1870 	return size;
1871 }
1872 
1873 /* called by intr_callback when read occurs */
1874 static int hso_mux_serial_read(struct hso_serial *serial)
1875 {
1876 	if (!serial)
1877 		return -EINVAL;
1878 
1879 	/* clean data */
1880 	memset(serial->rx_data[0], 0, CTRL_URB_RX_SIZE);
1881 	/* make the request */
1882 
1883 	if (serial->num_rx_urbs != 1) {
1884 		dev_err(&serial->parent->interface->dev,
1885 			"ERROR: mux'd reads with multiple buffers "
1886 			"not possible\n");
1887 		return 0;
1888 	}
1889 	return mux_device_request(serial,
1890 				  USB_CDC_GET_ENCAPSULATED_RESPONSE,
1891 				  serial->parent->port_spec & HSO_PORT_MASK,
1892 				  serial->rx_urb[0],
1893 				  &serial->ctrl_req_rx,
1894 				  serial->rx_data[0], serial->rx_data_length);
1895 }
1896 
1897 /* used for muxed serial port callback (muxed serial read) */
1898 static void intr_callback(struct urb *urb)
1899 {
1900 	struct hso_shared_int *shared_int = urb->context;
1901 	struct hso_serial *serial;
1902 	unsigned char *port_req;
1903 	int status = urb->status;
1904 	int i;
1905 
1906 	usb_mark_last_busy(urb->dev);
1907 
1908 	/* sanity check */
1909 	if (!shared_int)
1910 		return;
1911 
1912 	/* status check */
1913 	if (status) {
1914 		handle_usb_error(status, __func__, NULL);
1915 		return;
1916 	}
1917 	D4("\n--- Got intr callback 0x%02X ---", status);
1918 
1919 	/* what request? */
1920 	port_req = urb->transfer_buffer;
1921 	D4(" port_req = 0x%.2X\n", *port_req);
1922 	/* loop over all muxed ports to find the one sending this */
1923 	for (i = 0; i < 8; i++) {
1924 		/* max 8 channels on MUX */
1925 		if (*port_req & (1 << i)) {
1926 			serial = get_serial_by_shared_int_and_type(shared_int,
1927 								   (1 << i));
1928 			if (serial != NULL) {
1929 				D1("Pending read interrupt on port %d\n", i);
1930 				spin_lock(&serial->serial_lock);
1931 				if (serial->rx_state == RX_IDLE &&
1932 					serial->open_count > 0) {
1933 					/* Setup and send a ctrl req read on
1934 					 * port i */
1935 					if (!serial->rx_urb_filled[0]) {
1936 						serial->rx_state = RX_SENT;
1937 						hso_mux_serial_read(serial);
1938 					} else
1939 						serial->rx_state = RX_PENDING;
1940 				} else {
1941 					D1("Already a read pending on "
1942 					   "port %d or port not open\n", i);
1943 				}
1944 				spin_unlock(&serial->serial_lock);
1945 			}
1946 		}
1947 	}
1948 	/* Resubmit interrupt urb */
1949 	hso_mux_submit_intr_urb(shared_int, urb->dev, GFP_ATOMIC);
1950 }
1951 
1952 /* called for writing to muxed serial port */
1953 static int hso_mux_serial_write_data(struct hso_serial *serial)
1954 {
1955 	if (NULL == serial)
1956 		return -EINVAL;
1957 
1958 	return mux_device_request(serial,
1959 				  USB_CDC_SEND_ENCAPSULATED_COMMAND,
1960 				  serial->parent->port_spec & HSO_PORT_MASK,
1961 				  serial->tx_urb,
1962 				  &serial->ctrl_req_tx,
1963 				  serial->tx_data, serial->tx_data_count);
1964 }
1965 
1966 /* write callback for Diag and CS port */
1967 static void hso_std_serial_write_bulk_callback(struct urb *urb)
1968 {
1969 	struct hso_serial *serial = urb->context;
1970 	int status = urb->status;
1971 	struct tty_struct *tty;
1972 
1973 	/* sanity check */
1974 	if (!serial) {
1975 		D1("serial == NULL");
1976 		return;
1977 	}
1978 
1979 	spin_lock(&serial->serial_lock);
1980 	serial->tx_urb_used = 0;
1981 	tty = tty_kref_get(serial->tty);
1982 	spin_unlock(&serial->serial_lock);
1983 	if (status) {
1984 		handle_usb_error(status, __func__, serial->parent);
1985 		tty_kref_put(tty);
1986 		return;
1987 	}
1988 	hso_put_activity(serial->parent);
1989 	if (tty) {
1990 		tty_wakeup(tty);
1991 		tty_kref_put(tty);
1992 	}
1993 	hso_kick_transmit(serial);
1994 
1995 	D1(" ");
1996 }
1997 
1998 /* called for writing diag or CS serial port */
1999 static int hso_std_serial_write_data(struct hso_serial *serial)
2000 {
2001 	int count = serial->tx_data_count;
2002 	int result;
2003 
2004 	usb_fill_bulk_urb(serial->tx_urb,
2005 			  serial->parent->usb,
2006 			  usb_sndbulkpipe(serial->parent->usb,
2007 					  serial->out_endp->
2008 					  bEndpointAddress & 0x7F),
2009 			  serial->tx_data, serial->tx_data_count,
2010 			  hso_std_serial_write_bulk_callback, serial);
2011 
2012 	result = usb_submit_urb(serial->tx_urb, GFP_ATOMIC);
2013 	if (result) {
2014 		dev_warn(&serial->parent->usb->dev,
2015 			 "Failed to submit urb - res %d\n", result);
2016 		return result;
2017 	}
2018 
2019 	return count;
2020 }
2021 
2022 /* callback after read or write on muxed serial port */
2023 static void ctrl_callback(struct urb *urb)
2024 {
2025 	struct hso_serial *serial = urb->context;
2026 	struct usb_ctrlrequest *req;
2027 	int status = urb->status;
2028 	struct tty_struct *tty;
2029 
2030 	/* sanity check */
2031 	if (!serial)
2032 		return;
2033 
2034 	spin_lock(&serial->serial_lock);
2035 	serial->tx_urb_used = 0;
2036 	tty = tty_kref_get(serial->tty);
2037 	spin_unlock(&serial->serial_lock);
2038 	if (status) {
2039 		handle_usb_error(status, __func__, serial->parent);
2040 		tty_kref_put(tty);
2041 		return;
2042 	}
2043 
2044 	/* what request? */
2045 	req = (struct usb_ctrlrequest *)(urb->setup_packet);
2046 	D4("\n--- Got muxed ctrl callback 0x%02X ---", status);
2047 	D4("Actual length of urb = %d\n", urb->actual_length);
2048 	DUMP1(urb->transfer_buffer, urb->actual_length);
2049 
2050 	if (req->bRequestType ==
2051 	    (USB_DIR_IN | USB_TYPE_OPTION_VENDOR | USB_RECIP_INTERFACE)) {
2052 		/* response to a read command */
2053 		serial->rx_urb_filled[0] = 1;
2054 		spin_lock(&serial->serial_lock);
2055 		put_rxbuf_data_and_resubmit_ctrl_urb(serial);
2056 		spin_unlock(&serial->serial_lock);
2057 	} else {
2058 		hso_put_activity(serial->parent);
2059 		if (tty)
2060 			tty_wakeup(tty);
2061 		/* response to a write command */
2062 		hso_kick_transmit(serial);
2063 	}
2064 	tty_kref_put(tty);
2065 }
2066 
2067 /* handle RX data for serial port */
2068 static int put_rxbuf_data(struct urb *urb, struct hso_serial *serial)
2069 {
2070 	struct tty_struct *tty;
2071 	int write_length_remaining = 0;
2072 	int curr_write_len;
2073 
2074 	/* Sanity check */
2075 	if (urb == NULL || serial == NULL) {
2076 		D1("serial = NULL");
2077 		return -2;
2078 	}
2079 
2080 	/* All callers to put_rxbuf_data hold serial_lock */
2081 	tty = tty_kref_get(serial->tty);
2082 
2083 	/* Push data to tty */
2084 	if (tty) {
2085 		write_length_remaining = urb->actual_length -
2086 			serial->curr_rx_urb_offset;
2087 		D1("data to push to tty");
2088 		while (write_length_remaining) {
2089 			if (test_bit(TTY_THROTTLED, &tty->flags)) {
2090 				tty_kref_put(tty);
2091 				return -1;
2092 			}
2093 			curr_write_len =  tty_insert_flip_string
2094 				(tty, urb->transfer_buffer +
2095 				 serial->curr_rx_urb_offset,
2096 				 write_length_remaining);
2097 			serial->curr_rx_urb_offset += curr_write_len;
2098 			write_length_remaining -= curr_write_len;
2099 			tty_flip_buffer_push(tty);
2100 		}
2101 	}
2102 	if (write_length_remaining == 0) {
2103 		serial->curr_rx_urb_offset = 0;
2104 		serial->rx_urb_filled[hso_urb_to_index(serial, urb)] = 0;
2105 	}
2106 	tty_kref_put(tty);
2107 	return write_length_remaining;
2108 }
2109 
2110 
2111 /* Base driver functions */
2112 
2113 static void hso_log_port(struct hso_device *hso_dev)
2114 {
2115 	char *port_type;
2116 	char port_dev[20];
2117 
2118 	switch (hso_dev->port_spec & HSO_PORT_MASK) {
2119 	case HSO_PORT_CONTROL:
2120 		port_type = "Control";
2121 		break;
2122 	case HSO_PORT_APP:
2123 		port_type = "Application";
2124 		break;
2125 	case HSO_PORT_GPS:
2126 		port_type = "GPS";
2127 		break;
2128 	case HSO_PORT_GPS_CONTROL:
2129 		port_type = "GPS control";
2130 		break;
2131 	case HSO_PORT_APP2:
2132 		port_type = "Application2";
2133 		break;
2134 	case HSO_PORT_PCSC:
2135 		port_type = "PCSC";
2136 		break;
2137 	case HSO_PORT_DIAG:
2138 		port_type = "Diagnostic";
2139 		break;
2140 	case HSO_PORT_DIAG2:
2141 		port_type = "Diagnostic2";
2142 		break;
2143 	case HSO_PORT_MODEM:
2144 		port_type = "Modem";
2145 		break;
2146 	case HSO_PORT_NETWORK:
2147 		port_type = "Network";
2148 		break;
2149 	default:
2150 		port_type = "Unknown";
2151 		break;
2152 	}
2153 	if ((hso_dev->port_spec & HSO_PORT_MASK) == HSO_PORT_NETWORK) {
2154 		sprintf(port_dev, "%s", dev2net(hso_dev)->net->name);
2155 	} else
2156 		sprintf(port_dev, "/dev/%s%d", tty_filename,
2157 			dev2ser(hso_dev)->minor);
2158 
2159 	dev_dbg(&hso_dev->interface->dev, "HSO: Found %s port %s\n",
2160 		port_type, port_dev);
2161 }
2162 
2163 static int hso_start_net_device(struct hso_device *hso_dev)
2164 {
2165 	int i, result = 0;
2166 	struct hso_net *hso_net = dev2net(hso_dev);
2167 
2168 	if (!hso_net)
2169 		return -ENODEV;
2170 
2171 	/* send URBs for all read buffers */
2172 	for (i = 0; i < MUX_BULK_RX_BUF_COUNT; i++) {
2173 
2174 		/* Prep a receive URB */
2175 		usb_fill_bulk_urb(hso_net->mux_bulk_rx_urb_pool[i],
2176 				  hso_dev->usb,
2177 				  usb_rcvbulkpipe(hso_dev->usb,
2178 						  hso_net->in_endp->
2179 						  bEndpointAddress & 0x7F),
2180 				  hso_net->mux_bulk_rx_buf_pool[i],
2181 				  MUX_BULK_RX_BUF_SIZE, read_bulk_callback,
2182 				  hso_net);
2183 
2184 		/* Put it out there so the device can send us stuff */
2185 		result = usb_submit_urb(hso_net->mux_bulk_rx_urb_pool[i],
2186 					GFP_NOIO);
2187 		if (result)
2188 			dev_warn(&hso_dev->usb->dev,
2189 				"%s failed mux_bulk_rx_urb[%d] %d\n", __func__,
2190 				i, result);
2191 	}
2192 
2193 	return result;
2194 }
2195 
2196 static int hso_stop_net_device(struct hso_device *hso_dev)
2197 {
2198 	int i;
2199 	struct hso_net *hso_net = dev2net(hso_dev);
2200 
2201 	if (!hso_net)
2202 		return -ENODEV;
2203 
2204 	for (i = 0; i < MUX_BULK_RX_BUF_COUNT; i++) {
2205 		if (hso_net->mux_bulk_rx_urb_pool[i])
2206 			usb_kill_urb(hso_net->mux_bulk_rx_urb_pool[i]);
2207 
2208 	}
2209 	if (hso_net->mux_bulk_tx_urb)
2210 		usb_kill_urb(hso_net->mux_bulk_tx_urb);
2211 
2212 	return 0;
2213 }
2214 
2215 static int hso_start_serial_device(struct hso_device *hso_dev, gfp_t flags)
2216 {
2217 	int i, result = 0;
2218 	struct hso_serial *serial = dev2ser(hso_dev);
2219 
2220 	if (!serial)
2221 		return -ENODEV;
2222 
2223 	/* If it is not the MUX port fill in and submit a bulk urb (already
2224 	 * allocated in hso_serial_start) */
2225 	if (!(serial->parent->port_spec & HSO_INTF_MUX)) {
2226 		for (i = 0; i < serial->num_rx_urbs; i++) {
2227 			usb_fill_bulk_urb(serial->rx_urb[i],
2228 					  serial->parent->usb,
2229 					  usb_rcvbulkpipe(serial->parent->usb,
2230 							  serial->in_endp->
2231 							  bEndpointAddress &
2232 							  0x7F),
2233 					  serial->rx_data[i],
2234 					  serial->rx_data_length,
2235 					  hso_std_serial_read_bulk_callback,
2236 					  serial);
2237 			result = usb_submit_urb(serial->rx_urb[i], flags);
2238 			if (result) {
2239 				dev_warn(&serial->parent->usb->dev,
2240 					 "Failed to submit urb - res %d\n",
2241 					 result);
2242 				break;
2243 			}
2244 		}
2245 	} else {
2246 		mutex_lock(&serial->shared_int->shared_int_lock);
2247 		if (!serial->shared_int->use_count) {
2248 			result =
2249 			    hso_mux_submit_intr_urb(serial->shared_int,
2250 						    hso_dev->usb, flags);
2251 		}
2252 		serial->shared_int->use_count++;
2253 		mutex_unlock(&serial->shared_int->shared_int_lock);
2254 	}
2255 	if (serial->tiocmget)
2256 		tiocmget_submit_urb(serial,
2257 				    serial->tiocmget,
2258 				    serial->parent->usb);
2259 	return result;
2260 }
2261 
2262 static int hso_stop_serial_device(struct hso_device *hso_dev)
2263 {
2264 	int i;
2265 	struct hso_serial *serial = dev2ser(hso_dev);
2266 	struct hso_tiocmget  *tiocmget;
2267 
2268 	if (!serial)
2269 		return -ENODEV;
2270 
2271 	for (i = 0; i < serial->num_rx_urbs; i++) {
2272 		if (serial->rx_urb[i]) {
2273 				usb_kill_urb(serial->rx_urb[i]);
2274 				serial->rx_urb_filled[i] = 0;
2275 		}
2276 	}
2277 	serial->curr_rx_urb_idx = 0;
2278 	serial->curr_rx_urb_offset = 0;
2279 
2280 	if (serial->tx_urb)
2281 		usb_kill_urb(serial->tx_urb);
2282 
2283 	if (serial->shared_int) {
2284 		mutex_lock(&serial->shared_int->shared_int_lock);
2285 		if (serial->shared_int->use_count &&
2286 		    (--serial->shared_int->use_count == 0)) {
2287 			struct urb *urb;
2288 
2289 			urb = serial->shared_int->shared_intr_urb;
2290 			if (urb)
2291 				usb_kill_urb(urb);
2292 		}
2293 		mutex_unlock(&serial->shared_int->shared_int_lock);
2294 	}
2295 	tiocmget = serial->tiocmget;
2296 	if (tiocmget) {
2297 		wake_up_interruptible(&tiocmget->waitq);
2298 		usb_kill_urb(tiocmget->urb);
2299 	}
2300 
2301 	return 0;
2302 }
2303 
2304 static void hso_serial_common_free(struct hso_serial *serial)
2305 {
2306 	int i;
2307 
2308 	if (serial->parent->dev)
2309 		device_remove_file(serial->parent->dev, &dev_attr_hsotype);
2310 
2311 	tty_unregister_device(tty_drv, serial->minor);
2312 
2313 	for (i = 0; i < serial->num_rx_urbs; i++) {
2314 		/* unlink and free RX URB */
2315 		usb_free_urb(serial->rx_urb[i]);
2316 		/* free the RX buffer */
2317 		kfree(serial->rx_data[i]);
2318 	}
2319 
2320 	/* unlink and free TX URB */
2321 	usb_free_urb(serial->tx_urb);
2322 	kfree(serial->tx_data);
2323 }
2324 
2325 static int hso_serial_common_create(struct hso_serial *serial, int num_urbs,
2326 				    int rx_size, int tx_size)
2327 {
2328 	struct device *dev;
2329 	int minor;
2330 	int i;
2331 
2332 	minor = get_free_serial_index();
2333 	if (minor < 0)
2334 		goto exit;
2335 
2336 	/* register our minor number */
2337 	serial->parent->dev = tty_register_device(tty_drv, minor,
2338 					&serial->parent->interface->dev);
2339 	dev = serial->parent->dev;
2340 	dev_set_drvdata(dev, serial->parent);
2341 	i = device_create_file(dev, &dev_attr_hsotype);
2342 
2343 	/* fill in specific data for later use */
2344 	serial->minor = minor;
2345 	serial->magic = HSO_SERIAL_MAGIC;
2346 	spin_lock_init(&serial->serial_lock);
2347 	serial->num_rx_urbs = num_urbs;
2348 
2349 	/* RX, allocate urb and initialize */
2350 
2351 	/* prepare our RX buffer */
2352 	serial->rx_data_length = rx_size;
2353 	for (i = 0; i < serial->num_rx_urbs; i++) {
2354 		serial->rx_urb[i] = usb_alloc_urb(0, GFP_KERNEL);
2355 		if (!serial->rx_urb[i]) {
2356 			dev_err(dev, "Could not allocate urb?\n");
2357 			goto exit;
2358 		}
2359 		serial->rx_urb[i]->transfer_buffer = NULL;
2360 		serial->rx_urb[i]->transfer_buffer_length = 0;
2361 		serial->rx_data[i] = kzalloc(serial->rx_data_length,
2362 					     GFP_KERNEL);
2363 		if (!serial->rx_data[i]) {
2364 			dev_err(dev, "%s - Out of memory\n", __func__);
2365 			goto exit;
2366 		}
2367 	}
2368 
2369 	/* TX, allocate urb and initialize */
2370 	serial->tx_urb = usb_alloc_urb(0, GFP_KERNEL);
2371 	if (!serial->tx_urb) {
2372 		dev_err(dev, "Could not allocate urb?\n");
2373 		goto exit;
2374 	}
2375 	serial->tx_urb->transfer_buffer = NULL;
2376 	serial->tx_urb->transfer_buffer_length = 0;
2377 	/* prepare our TX buffer */
2378 	serial->tx_data_count = 0;
2379 	serial->tx_buffer_count = 0;
2380 	serial->tx_data_length = tx_size;
2381 	serial->tx_data = kzalloc(serial->tx_data_length, GFP_KERNEL);
2382 	if (!serial->tx_data) {
2383 		dev_err(dev, "%s - Out of memory\n", __func__);
2384 		goto exit;
2385 	}
2386 	serial->tx_buffer = kzalloc(serial->tx_data_length, GFP_KERNEL);
2387 	if (!serial->tx_buffer) {
2388 		dev_err(dev, "%s - Out of memory\n", __func__);
2389 		goto exit;
2390 	}
2391 
2392 	return 0;
2393 exit:
2394 	hso_serial_common_free(serial);
2395 	return -1;
2396 }
2397 
2398 /* Creates a general hso device */
2399 static struct hso_device *hso_create_device(struct usb_interface *intf,
2400 					    int port_spec)
2401 {
2402 	struct hso_device *hso_dev;
2403 
2404 	hso_dev = kzalloc(sizeof(*hso_dev), GFP_ATOMIC);
2405 	if (!hso_dev)
2406 		return NULL;
2407 
2408 	hso_dev->port_spec = port_spec;
2409 	hso_dev->usb = interface_to_usbdev(intf);
2410 	hso_dev->interface = intf;
2411 	kref_init(&hso_dev->ref);
2412 	mutex_init(&hso_dev->mutex);
2413 
2414 	INIT_WORK(&hso_dev->async_get_intf, async_get_intf);
2415 	INIT_WORK(&hso_dev->async_put_intf, async_put_intf);
2416 	INIT_WORK(&hso_dev->reset_device, reset_device);
2417 
2418 	return hso_dev;
2419 }
2420 
2421 /* Removes a network device in the network device table */
2422 static int remove_net_device(struct hso_device *hso_dev)
2423 {
2424 	int i;
2425 
2426 	for (i = 0; i < HSO_MAX_NET_DEVICES; i++) {
2427 		if (network_table[i] == hso_dev) {
2428 			network_table[i] = NULL;
2429 			break;
2430 		}
2431 	}
2432 	if (i == HSO_MAX_NET_DEVICES)
2433 		return -1;
2434 	return 0;
2435 }
2436 
2437 /* Frees our network device */
2438 static void hso_free_net_device(struct hso_device *hso_dev)
2439 {
2440 	int i;
2441 	struct hso_net *hso_net = dev2net(hso_dev);
2442 
2443 	if (!hso_net)
2444 		return;
2445 
2446 	remove_net_device(hso_net->parent);
2447 
2448 	if (hso_net->net) {
2449 		unregister_netdev(hso_net->net);
2450 		free_netdev(hso_net->net);
2451 	}
2452 
2453 	/* start freeing */
2454 	for (i = 0; i < MUX_BULK_RX_BUF_COUNT; i++) {
2455 		usb_free_urb(hso_net->mux_bulk_rx_urb_pool[i]);
2456 		kfree(hso_net->mux_bulk_rx_buf_pool[i]);
2457 		hso_net->mux_bulk_rx_buf_pool[i] = NULL;
2458 	}
2459 	usb_free_urb(hso_net->mux_bulk_tx_urb);
2460 	kfree(hso_net->mux_bulk_tx_buf);
2461 	hso_net->mux_bulk_tx_buf = NULL;
2462 
2463 	kfree(hso_dev);
2464 }
2465 
2466 static const struct net_device_ops hso_netdev_ops = {
2467 	.ndo_open	= hso_net_open,
2468 	.ndo_stop	= hso_net_close,
2469 	.ndo_start_xmit = hso_net_start_xmit,
2470 	.ndo_tx_timeout = hso_net_tx_timeout,
2471 };
2472 
2473 /* initialize the network interface */
2474 static void hso_net_init(struct net_device *net)
2475 {
2476 	struct hso_net *hso_net = netdev_priv(net);
2477 
2478 	D1("sizeof hso_net is %d", (int)sizeof(*hso_net));
2479 
2480 	/* fill in the other fields */
2481 	net->netdev_ops = &hso_netdev_ops;
2482 	net->watchdog_timeo = HSO_NET_TX_TIMEOUT;
2483 	net->flags = IFF_POINTOPOINT | IFF_NOARP | IFF_MULTICAST;
2484 	net->type = ARPHRD_NONE;
2485 	net->mtu = DEFAULT_MTU - 14;
2486 	net->tx_queue_len = 10;
2487 	SET_ETHTOOL_OPS(net, &ops);
2488 
2489 	/* and initialize the semaphore */
2490 	spin_lock_init(&hso_net->net_lock);
2491 }
2492 
2493 /* Adds a network device in the network device table */
2494 static int add_net_device(struct hso_device *hso_dev)
2495 {
2496 	int i;
2497 
2498 	for (i = 0; i < HSO_MAX_NET_DEVICES; i++) {
2499 		if (network_table[i] == NULL) {
2500 			network_table[i] = hso_dev;
2501 			break;
2502 		}
2503 	}
2504 	if (i == HSO_MAX_NET_DEVICES)
2505 		return -1;
2506 	return 0;
2507 }
2508 
2509 static int hso_rfkill_set_block(void *data, bool blocked)
2510 {
2511 	struct hso_device *hso_dev = data;
2512 	int enabled = !blocked;
2513 	int rv;
2514 
2515 	mutex_lock(&hso_dev->mutex);
2516 	if (hso_dev->usb_gone)
2517 		rv = 0;
2518 	else
2519 		rv = usb_control_msg(hso_dev->usb, usb_rcvctrlpipe(hso_dev->usb, 0),
2520 				       enabled ? 0x82 : 0x81, 0x40, 0, 0, NULL, 0,
2521 				       USB_CTRL_SET_TIMEOUT);
2522 	mutex_unlock(&hso_dev->mutex);
2523 	return rv;
2524 }
2525 
2526 static const struct rfkill_ops hso_rfkill_ops = {
2527 	.set_block = hso_rfkill_set_block,
2528 };
2529 
2530 /* Creates and sets up everything for rfkill */
2531 static void hso_create_rfkill(struct hso_device *hso_dev,
2532 			     struct usb_interface *interface)
2533 {
2534 	struct hso_net *hso_net = dev2net(hso_dev);
2535 	struct device *dev = &hso_net->net->dev;
2536 	char *rfkn;
2537 
2538 	rfkn = kzalloc(20, GFP_KERNEL);
2539 	if (!rfkn)
2540 		dev_err(dev, "%s - Out of memory\n", __func__);
2541 
2542 	snprintf(rfkn, 20, "hso-%d",
2543 		 interface->altsetting->desc.bInterfaceNumber);
2544 
2545 	hso_net->rfkill = rfkill_alloc(rfkn,
2546 				       &interface_to_usbdev(interface)->dev,
2547 				       RFKILL_TYPE_WWAN,
2548 				       &hso_rfkill_ops, hso_dev);
2549 	if (!hso_net->rfkill) {
2550 		dev_err(dev, "%s - Out of memory\n", __func__);
2551 		kfree(rfkn);
2552 		return;
2553 	}
2554 	if (rfkill_register(hso_net->rfkill) < 0) {
2555 		rfkill_destroy(hso_net->rfkill);
2556 		kfree(rfkn);
2557 		hso_net->rfkill = NULL;
2558 		dev_err(dev, "%s - Failed to register rfkill\n", __func__);
2559 		return;
2560 	}
2561 }
2562 
2563 static struct device_type hso_type = {
2564 	.name	= "wwan",
2565 };
2566 
2567 /* Creates our network device */
2568 static struct hso_device *hso_create_net_device(struct usb_interface *interface,
2569 						int port_spec)
2570 {
2571 	int result, i;
2572 	struct net_device *net;
2573 	struct hso_net *hso_net;
2574 	struct hso_device *hso_dev;
2575 
2576 	hso_dev = hso_create_device(interface, port_spec);
2577 	if (!hso_dev)
2578 		return NULL;
2579 
2580 	/* allocate our network device, then we can put in our private data */
2581 	/* call hso_net_init to do the basic initialization */
2582 	net = alloc_netdev(sizeof(struct hso_net), "hso%d", hso_net_init);
2583 	if (!net) {
2584 		dev_err(&interface->dev, "Unable to create ethernet device\n");
2585 		goto exit;
2586 	}
2587 
2588 	hso_net = netdev_priv(net);
2589 
2590 	hso_dev->port_data.dev_net = hso_net;
2591 	hso_net->net = net;
2592 	hso_net->parent = hso_dev;
2593 
2594 	hso_net->in_endp = hso_get_ep(interface, USB_ENDPOINT_XFER_BULK,
2595 				      USB_DIR_IN);
2596 	if (!hso_net->in_endp) {
2597 		dev_err(&interface->dev, "Can't find BULK IN endpoint\n");
2598 		goto exit;
2599 	}
2600 	hso_net->out_endp = hso_get_ep(interface, USB_ENDPOINT_XFER_BULK,
2601 				       USB_DIR_OUT);
2602 	if (!hso_net->out_endp) {
2603 		dev_err(&interface->dev, "Can't find BULK OUT endpoint\n");
2604 		goto exit;
2605 	}
2606 	SET_NETDEV_DEV(net, &interface->dev);
2607 	SET_NETDEV_DEVTYPE(net, &hso_type);
2608 
2609 	/* registering our net device */
2610 	result = register_netdev(net);
2611 	if (result) {
2612 		dev_err(&interface->dev, "Failed to register device\n");
2613 		goto exit;
2614 	}
2615 
2616 	/* start allocating */
2617 	for (i = 0; i < MUX_BULK_RX_BUF_COUNT; i++) {
2618 		hso_net->mux_bulk_rx_urb_pool[i] = usb_alloc_urb(0, GFP_KERNEL);
2619 		if (!hso_net->mux_bulk_rx_urb_pool[i]) {
2620 			dev_err(&interface->dev, "Could not allocate rx urb\n");
2621 			goto exit;
2622 		}
2623 		hso_net->mux_bulk_rx_buf_pool[i] = kzalloc(MUX_BULK_RX_BUF_SIZE,
2624 							   GFP_KERNEL);
2625 		if (!hso_net->mux_bulk_rx_buf_pool[i]) {
2626 			dev_err(&interface->dev, "Could not allocate rx buf\n");
2627 			goto exit;
2628 		}
2629 	}
2630 	hso_net->mux_bulk_tx_urb = usb_alloc_urb(0, GFP_KERNEL);
2631 	if (!hso_net->mux_bulk_tx_urb) {
2632 		dev_err(&interface->dev, "Could not allocate tx urb\n");
2633 		goto exit;
2634 	}
2635 	hso_net->mux_bulk_tx_buf = kzalloc(MUX_BULK_TX_BUF_SIZE, GFP_KERNEL);
2636 	if (!hso_net->mux_bulk_tx_buf) {
2637 		dev_err(&interface->dev, "Could not allocate tx buf\n");
2638 		goto exit;
2639 	}
2640 
2641 	add_net_device(hso_dev);
2642 
2643 	hso_log_port(hso_dev);
2644 
2645 	hso_create_rfkill(hso_dev, interface);
2646 
2647 	return hso_dev;
2648 exit:
2649 	hso_free_net_device(hso_dev);
2650 	return NULL;
2651 }
2652 
2653 static void hso_free_tiomget(struct hso_serial *serial)
2654 {
2655 	struct hso_tiocmget *tiocmget = serial->tiocmget;
2656 	if (tiocmget) {
2657 		if (tiocmget->urb) {
2658 			usb_free_urb(tiocmget->urb);
2659 			tiocmget->urb = NULL;
2660 		}
2661 		serial->tiocmget = NULL;
2662 		kfree(tiocmget);
2663 
2664 	}
2665 }
2666 
2667 /* Frees an AT channel ( goes for both mux and non-mux ) */
2668 static void hso_free_serial_device(struct hso_device *hso_dev)
2669 {
2670 	struct hso_serial *serial = dev2ser(hso_dev);
2671 
2672 	if (!serial)
2673 		return;
2674 	set_serial_by_index(serial->minor, NULL);
2675 
2676 	hso_serial_common_free(serial);
2677 
2678 	if (serial->shared_int) {
2679 		mutex_lock(&serial->shared_int->shared_int_lock);
2680 		if (--serial->shared_int->ref_count == 0)
2681 			hso_free_shared_int(serial->shared_int);
2682 		else
2683 			mutex_unlock(&serial->shared_int->shared_int_lock);
2684 	}
2685 	hso_free_tiomget(serial);
2686 	kfree(serial);
2687 	kfree(hso_dev);
2688 }
2689 
2690 /* Creates a bulk AT channel */
2691 static struct hso_device *hso_create_bulk_serial_device(
2692 			struct usb_interface *interface, int port)
2693 {
2694 	struct hso_device *hso_dev;
2695 	struct hso_serial *serial;
2696 	int num_urbs;
2697 	struct hso_tiocmget *tiocmget;
2698 
2699 	hso_dev = hso_create_device(interface, port);
2700 	if (!hso_dev)
2701 		return NULL;
2702 
2703 	serial = kzalloc(sizeof(*serial), GFP_KERNEL);
2704 	if (!serial)
2705 		goto exit;
2706 
2707 	serial->parent = hso_dev;
2708 	hso_dev->port_data.dev_serial = serial;
2709 
2710 	if ((port & HSO_PORT_MASK) == HSO_PORT_MODEM) {
2711 		num_urbs = 2;
2712 		serial->tiocmget = kzalloc(sizeof(struct hso_tiocmget),
2713 					   GFP_KERNEL);
2714 		/* it isn't going to break our heart if serial->tiocmget
2715 		 *  allocation fails don't bother checking this.
2716 		 */
2717 		if (serial->tiocmget) {
2718 			tiocmget = serial->tiocmget;
2719 			tiocmget->urb = usb_alloc_urb(0, GFP_KERNEL);
2720 			if (tiocmget->urb) {
2721 				mutex_init(&tiocmget->mutex);
2722 				init_waitqueue_head(&tiocmget->waitq);
2723 				tiocmget->endp = hso_get_ep(
2724 					interface,
2725 					USB_ENDPOINT_XFER_INT,
2726 					USB_DIR_IN);
2727 			} else
2728 				hso_free_tiomget(serial);
2729 		}
2730 	}
2731 	else
2732 		num_urbs = 1;
2733 
2734 	if (hso_serial_common_create(serial, num_urbs, BULK_URB_RX_SIZE,
2735 				     BULK_URB_TX_SIZE))
2736 		goto exit;
2737 
2738 	serial->in_endp = hso_get_ep(interface, USB_ENDPOINT_XFER_BULK,
2739 				     USB_DIR_IN);
2740 	if (!serial->in_endp) {
2741 		dev_err(&interface->dev, "Failed to find BULK IN ep\n");
2742 		goto exit2;
2743 	}
2744 
2745 	if (!
2746 	    (serial->out_endp =
2747 	     hso_get_ep(interface, USB_ENDPOINT_XFER_BULK, USB_DIR_OUT))) {
2748 		dev_err(&interface->dev, "Failed to find BULK IN ep\n");
2749 		goto exit2;
2750 	}
2751 
2752 	serial->write_data = hso_std_serial_write_data;
2753 
2754 	/* and record this serial */
2755 	set_serial_by_index(serial->minor, serial);
2756 
2757 	/* setup the proc dirs and files if needed */
2758 	hso_log_port(hso_dev);
2759 
2760 	/* done, return it */
2761 	return hso_dev;
2762 
2763 exit2:
2764 	hso_serial_common_free(serial);
2765 exit:
2766 	hso_free_tiomget(serial);
2767 	kfree(serial);
2768 	kfree(hso_dev);
2769 	return NULL;
2770 }
2771 
2772 /* Creates a multiplexed AT channel */
2773 static
2774 struct hso_device *hso_create_mux_serial_device(struct usb_interface *interface,
2775 						int port,
2776 						struct hso_shared_int *mux)
2777 {
2778 	struct hso_device *hso_dev;
2779 	struct hso_serial *serial;
2780 	int port_spec;
2781 
2782 	port_spec = HSO_INTF_MUX;
2783 	port_spec &= ~HSO_PORT_MASK;
2784 
2785 	port_spec |= hso_mux_to_port(port);
2786 	if ((port_spec & HSO_PORT_MASK) == HSO_PORT_NO_PORT)
2787 		return NULL;
2788 
2789 	hso_dev = hso_create_device(interface, port_spec);
2790 	if (!hso_dev)
2791 		return NULL;
2792 
2793 	serial = kzalloc(sizeof(*serial), GFP_KERNEL);
2794 	if (!serial)
2795 		goto exit;
2796 
2797 	hso_dev->port_data.dev_serial = serial;
2798 	serial->parent = hso_dev;
2799 
2800 	if (hso_serial_common_create
2801 	    (serial, 1, CTRL_URB_RX_SIZE, CTRL_URB_TX_SIZE))
2802 		goto exit;
2803 
2804 	serial->tx_data_length--;
2805 	serial->write_data = hso_mux_serial_write_data;
2806 
2807 	serial->shared_int = mux;
2808 	mutex_lock(&serial->shared_int->shared_int_lock);
2809 	serial->shared_int->ref_count++;
2810 	mutex_unlock(&serial->shared_int->shared_int_lock);
2811 
2812 	/* and record this serial */
2813 	set_serial_by_index(serial->minor, serial);
2814 
2815 	/* setup the proc dirs and files if needed */
2816 	hso_log_port(hso_dev);
2817 
2818 	/* done, return it */
2819 	return hso_dev;
2820 
2821 exit:
2822 	if (serial) {
2823 		tty_unregister_device(tty_drv, serial->minor);
2824 		kfree(serial);
2825 	}
2826 	if (hso_dev)
2827 		kfree(hso_dev);
2828 	return NULL;
2829 
2830 }
2831 
2832 static void hso_free_shared_int(struct hso_shared_int *mux)
2833 {
2834 	usb_free_urb(mux->shared_intr_urb);
2835 	kfree(mux->shared_intr_buf);
2836 	mutex_unlock(&mux->shared_int_lock);
2837 	kfree(mux);
2838 }
2839 
2840 static
2841 struct hso_shared_int *hso_create_shared_int(struct usb_interface *interface)
2842 {
2843 	struct hso_shared_int *mux = kzalloc(sizeof(*mux), GFP_KERNEL);
2844 
2845 	if (!mux)
2846 		return NULL;
2847 
2848 	mux->intr_endp = hso_get_ep(interface, USB_ENDPOINT_XFER_INT,
2849 				    USB_DIR_IN);
2850 	if (!mux->intr_endp) {
2851 		dev_err(&interface->dev, "Can't find INT IN endpoint\n");
2852 		goto exit;
2853 	}
2854 
2855 	mux->shared_intr_urb = usb_alloc_urb(0, GFP_KERNEL);
2856 	if (!mux->shared_intr_urb) {
2857 		dev_err(&interface->dev, "Could not allocate intr urb?\n");
2858 		goto exit;
2859 	}
2860 	mux->shared_intr_buf =
2861 		kzalloc(le16_to_cpu(mux->intr_endp->wMaxPacketSize),
2862 			GFP_KERNEL);
2863 	if (!mux->shared_intr_buf) {
2864 		dev_err(&interface->dev, "Could not allocate intr buf?\n");
2865 		goto exit;
2866 	}
2867 
2868 	mutex_init(&mux->shared_int_lock);
2869 
2870 	return mux;
2871 
2872 exit:
2873 	kfree(mux->shared_intr_buf);
2874 	usb_free_urb(mux->shared_intr_urb);
2875 	kfree(mux);
2876 	return NULL;
2877 }
2878 
2879 /* Gets the port spec for a certain interface */
2880 static int hso_get_config_data(struct usb_interface *interface)
2881 {
2882 	struct usb_device *usbdev = interface_to_usbdev(interface);
2883 	u8 config_data[17];
2884 	u32 if_num = interface->altsetting->desc.bInterfaceNumber;
2885 	s32 result;
2886 
2887 	if (usb_control_msg(usbdev, usb_rcvctrlpipe(usbdev, 0),
2888 			    0x86, 0xC0, 0, 0, config_data, 17,
2889 			    USB_CTRL_SET_TIMEOUT) != 0x11) {
2890 		return -EIO;
2891 	}
2892 
2893 	switch (config_data[if_num]) {
2894 	case 0x0:
2895 		result = 0;
2896 		break;
2897 	case 0x1:
2898 		result = HSO_PORT_DIAG;
2899 		break;
2900 	case 0x2:
2901 		result = HSO_PORT_GPS;
2902 		break;
2903 	case 0x3:
2904 		result = HSO_PORT_GPS_CONTROL;
2905 		break;
2906 	case 0x4:
2907 		result = HSO_PORT_APP;
2908 		break;
2909 	case 0x5:
2910 		result = HSO_PORT_APP2;
2911 		break;
2912 	case 0x6:
2913 		result = HSO_PORT_CONTROL;
2914 		break;
2915 	case 0x7:
2916 		result = HSO_PORT_NETWORK;
2917 		break;
2918 	case 0x8:
2919 		result = HSO_PORT_MODEM;
2920 		break;
2921 	case 0x9:
2922 		result = HSO_PORT_MSD;
2923 		break;
2924 	case 0xa:
2925 		result = HSO_PORT_PCSC;
2926 		break;
2927 	case 0xb:
2928 		result = HSO_PORT_VOICE;
2929 		break;
2930 	default:
2931 		result = 0;
2932 	}
2933 
2934 	if (result)
2935 		result |= HSO_INTF_BULK;
2936 
2937 	if (config_data[16] & 0x1)
2938 		result |= HSO_INFO_CRC_BUG;
2939 
2940 	return result;
2941 }
2942 
2943 /* called once for each interface upon device insertion */
2944 static int hso_probe(struct usb_interface *interface,
2945 		     const struct usb_device_id *id)
2946 {
2947 	int mux, i, if_num, port_spec;
2948 	unsigned char port_mask;
2949 	struct hso_device *hso_dev = NULL;
2950 	struct hso_shared_int *shared_int;
2951 	struct hso_device *tmp_dev = NULL;
2952 
2953 	if_num = interface->altsetting->desc.bInterfaceNumber;
2954 
2955 	/* Get the interface/port specification from either driver_info or from
2956 	 * the device itself */
2957 	if (id->driver_info)
2958 		port_spec = ((u32 *)(id->driver_info))[if_num];
2959 	else
2960 		port_spec = hso_get_config_data(interface);
2961 
2962 	if (interface->cur_altsetting->desc.bInterfaceClass != 0xFF) {
2963 		dev_err(&interface->dev, "Not our interface\n");
2964 		return -ENODEV;
2965 	}
2966 	/* Check if we need to switch to alt interfaces prior to port
2967 	 * configuration */
2968 	if (interface->num_altsetting > 1)
2969 		usb_set_interface(interface_to_usbdev(interface), if_num, 1);
2970 	interface->needs_remote_wakeup = 1;
2971 
2972 	/* Allocate new hso device(s) */
2973 	switch (port_spec & HSO_INTF_MASK) {
2974 	case HSO_INTF_MUX:
2975 		if ((port_spec & HSO_PORT_MASK) == HSO_PORT_NETWORK) {
2976 			/* Create the network device */
2977 			if (!disable_net) {
2978 				hso_dev = hso_create_net_device(interface,
2979 								port_spec);
2980 				if (!hso_dev)
2981 					goto exit;
2982 				tmp_dev = hso_dev;
2983 			}
2984 		}
2985 
2986 		if (hso_get_mux_ports(interface, &port_mask))
2987 			/* TODO: de-allocate everything */
2988 			goto exit;
2989 
2990 		shared_int = hso_create_shared_int(interface);
2991 		if (!shared_int)
2992 			goto exit;
2993 
2994 		for (i = 1, mux = 0; i < 0x100; i = i << 1, mux++) {
2995 			if (port_mask & i) {
2996 				hso_dev = hso_create_mux_serial_device(
2997 						interface, i, shared_int);
2998 				if (!hso_dev)
2999 					goto exit;
3000 			}
3001 		}
3002 
3003 		if (tmp_dev)
3004 			hso_dev = tmp_dev;
3005 		break;
3006 
3007 	case HSO_INTF_BULK:
3008 		/* It's a regular bulk interface */
3009 		if (((port_spec & HSO_PORT_MASK) == HSO_PORT_NETWORK) &&
3010 		    !disable_net)
3011 			hso_dev = hso_create_net_device(interface, port_spec);
3012 		else
3013 			hso_dev =
3014 			    hso_create_bulk_serial_device(interface, port_spec);
3015 		if (!hso_dev)
3016 			goto exit;
3017 		break;
3018 	default:
3019 		goto exit;
3020 	}
3021 
3022 	/* save our data pointer in this device */
3023 	usb_set_intfdata(interface, hso_dev);
3024 
3025 	/* done */
3026 	return 0;
3027 exit:
3028 	hso_free_interface(interface);
3029 	return -ENODEV;
3030 }
3031 
3032 /* device removed, cleaning up */
3033 static void hso_disconnect(struct usb_interface *interface)
3034 {
3035 	hso_free_interface(interface);
3036 
3037 	/* remove reference of our private data */
3038 	usb_set_intfdata(interface, NULL);
3039 }
3040 
3041 static void async_get_intf(struct work_struct *data)
3042 {
3043 	struct hso_device *hso_dev =
3044 	    container_of(data, struct hso_device, async_get_intf);
3045 	usb_autopm_get_interface(hso_dev->interface);
3046 }
3047 
3048 static void async_put_intf(struct work_struct *data)
3049 {
3050 	struct hso_device *hso_dev =
3051 	    container_of(data, struct hso_device, async_put_intf);
3052 	usb_autopm_put_interface(hso_dev->interface);
3053 }
3054 
3055 static int hso_get_activity(struct hso_device *hso_dev)
3056 {
3057 	if (hso_dev->usb->state == USB_STATE_SUSPENDED) {
3058 		if (!hso_dev->is_active) {
3059 			hso_dev->is_active = 1;
3060 			schedule_work(&hso_dev->async_get_intf);
3061 		}
3062 	}
3063 
3064 	if (hso_dev->usb->state != USB_STATE_CONFIGURED)
3065 		return -EAGAIN;
3066 
3067 	usb_mark_last_busy(hso_dev->usb);
3068 
3069 	return 0;
3070 }
3071 
3072 static int hso_put_activity(struct hso_device *hso_dev)
3073 {
3074 	if (hso_dev->usb->state != USB_STATE_SUSPENDED) {
3075 		if (hso_dev->is_active) {
3076 			hso_dev->is_active = 0;
3077 			schedule_work(&hso_dev->async_put_intf);
3078 			return -EAGAIN;
3079 		}
3080 	}
3081 	hso_dev->is_active = 0;
3082 	return 0;
3083 }
3084 
3085 /* called by kernel when we need to suspend device */
3086 static int hso_suspend(struct usb_interface *iface, pm_message_t message)
3087 {
3088 	int i, result;
3089 
3090 	/* Stop all serial ports */
3091 	for (i = 0; i < HSO_SERIAL_TTY_MINORS; i++) {
3092 		if (serial_table[i] && (serial_table[i]->interface == iface)) {
3093 			result = hso_stop_serial_device(serial_table[i]);
3094 			if (result)
3095 				goto out;
3096 		}
3097 	}
3098 
3099 	/* Stop all network ports */
3100 	for (i = 0; i < HSO_MAX_NET_DEVICES; i++) {
3101 		if (network_table[i] &&
3102 		    (network_table[i]->interface == iface)) {
3103 			result = hso_stop_net_device(network_table[i]);
3104 			if (result)
3105 				goto out;
3106 		}
3107 	}
3108 
3109 out:
3110 	return 0;
3111 }
3112 
3113 /* called by kernel when we need to resume device */
3114 static int hso_resume(struct usb_interface *iface)
3115 {
3116 	int i, result = 0;
3117 	struct hso_net *hso_net;
3118 
3119 	/* Start all serial ports */
3120 	for (i = 0; i < HSO_SERIAL_TTY_MINORS; i++) {
3121 		if (serial_table[i] && (serial_table[i]->interface == iface)) {
3122 			if (dev2ser(serial_table[i])->open_count) {
3123 				result =
3124 				    hso_start_serial_device(serial_table[i], GFP_NOIO);
3125 				hso_kick_transmit(dev2ser(serial_table[i]));
3126 				if (result)
3127 					goto out;
3128 			}
3129 		}
3130 	}
3131 
3132 	/* Start all network ports */
3133 	for (i = 0; i < HSO_MAX_NET_DEVICES; i++) {
3134 		if (network_table[i] &&
3135 		    (network_table[i]->interface == iface)) {
3136 			hso_net = dev2net(network_table[i]);
3137 			if (hso_net->flags & IFF_UP) {
3138 				/* First transmit any lingering data,
3139 				   then restart the device. */
3140 				if (hso_net->skb_tx_buf) {
3141 					dev_dbg(&iface->dev,
3142 						"Transmitting"
3143 						" lingering data\n");
3144 					hso_net_start_xmit(hso_net->skb_tx_buf,
3145 							   hso_net->net);
3146 					hso_net->skb_tx_buf = NULL;
3147 				}
3148 				result = hso_start_net_device(network_table[i]);
3149 				if (result)
3150 					goto out;
3151 			}
3152 		}
3153 	}
3154 
3155 out:
3156 	return result;
3157 }
3158 
3159 static void reset_device(struct work_struct *data)
3160 {
3161 	struct hso_device *hso_dev =
3162 	    container_of(data, struct hso_device, reset_device);
3163 	struct usb_device *usb = hso_dev->usb;
3164 	int result;
3165 
3166 	if (hso_dev->usb_gone) {
3167 		D1("No reset during disconnect\n");
3168 	} else {
3169 		result = usb_lock_device_for_reset(usb, hso_dev->interface);
3170 		if (result < 0)
3171 			D1("unable to lock device for reset: %d\n", result);
3172 		else {
3173 			usb_reset_device(usb);
3174 			usb_unlock_device(usb);
3175 		}
3176 	}
3177 }
3178 
3179 static void hso_serial_ref_free(struct kref *ref)
3180 {
3181 	struct hso_device *hso_dev = container_of(ref, struct hso_device, ref);
3182 
3183 	hso_free_serial_device(hso_dev);
3184 }
3185 
3186 static void hso_free_interface(struct usb_interface *interface)
3187 {
3188 	struct hso_serial *hso_dev;
3189 	struct tty_struct *tty;
3190 	int i;
3191 
3192 	for (i = 0; i < HSO_SERIAL_TTY_MINORS; i++) {
3193 		if (serial_table[i] &&
3194 		    (serial_table[i]->interface == interface)) {
3195 			hso_dev = dev2ser(serial_table[i]);
3196 			spin_lock_irq(&hso_dev->serial_lock);
3197 			tty = tty_kref_get(hso_dev->tty);
3198 			spin_unlock_irq(&hso_dev->serial_lock);
3199 			if (tty)
3200 				tty_hangup(tty);
3201 			mutex_lock(&hso_dev->parent->mutex);
3202 			tty_kref_put(tty);
3203 			hso_dev->parent->usb_gone = 1;
3204 			mutex_unlock(&hso_dev->parent->mutex);
3205 			kref_put(&serial_table[i]->ref, hso_serial_ref_free);
3206 		}
3207 	}
3208 
3209 	for (i = 0; i < HSO_MAX_NET_DEVICES; i++) {
3210 		if (network_table[i] &&
3211 		    (network_table[i]->interface == interface)) {
3212 			struct rfkill *rfk = dev2net(network_table[i])->rfkill;
3213 			/* hso_stop_net_device doesn't stop the net queue since
3214 			 * traffic needs to start it again when suspended */
3215 			netif_stop_queue(dev2net(network_table[i])->net);
3216 			hso_stop_net_device(network_table[i]);
3217 			cancel_work_sync(&network_table[i]->async_put_intf);
3218 			cancel_work_sync(&network_table[i]->async_get_intf);
3219 			if (rfk) {
3220 				rfkill_unregister(rfk);
3221 				rfkill_destroy(rfk);
3222 			}
3223 			hso_free_net_device(network_table[i]);
3224 		}
3225 	}
3226 }
3227 
3228 /* Helper functions */
3229 
3230 /* Get the endpoint ! */
3231 static struct usb_endpoint_descriptor *hso_get_ep(struct usb_interface *intf,
3232 						  int type, int dir)
3233 {
3234 	int i;
3235 	struct usb_host_interface *iface = intf->cur_altsetting;
3236 	struct usb_endpoint_descriptor *endp;
3237 
3238 	for (i = 0; i < iface->desc.bNumEndpoints; i++) {
3239 		endp = &iface->endpoint[i].desc;
3240 		if (((endp->bEndpointAddress & USB_ENDPOINT_DIR_MASK) == dir) &&
3241 		    (usb_endpoint_type(endp) == type))
3242 			return endp;
3243 	}
3244 
3245 	return NULL;
3246 }
3247 
3248 /* Get the byte that describes which ports are enabled */
3249 static int hso_get_mux_ports(struct usb_interface *intf, unsigned char *ports)
3250 {
3251 	int i;
3252 	struct usb_host_interface *iface = intf->cur_altsetting;
3253 
3254 	if (iface->extralen == 3) {
3255 		*ports = iface->extra[2];
3256 		return 0;
3257 	}
3258 
3259 	for (i = 0; i < iface->desc.bNumEndpoints; i++) {
3260 		if (iface->endpoint[i].extralen == 3) {
3261 			*ports = iface->endpoint[i].extra[2];
3262 			return 0;
3263 		}
3264 	}
3265 
3266 	return -1;
3267 }
3268 
3269 /* interrupt urb needs to be submitted, used for serial read of muxed port */
3270 static int hso_mux_submit_intr_urb(struct hso_shared_int *shared_int,
3271 				   struct usb_device *usb, gfp_t gfp)
3272 {
3273 	int result;
3274 
3275 	usb_fill_int_urb(shared_int->shared_intr_urb, usb,
3276 			 usb_rcvintpipe(usb,
3277 				shared_int->intr_endp->bEndpointAddress & 0x7F),
3278 			 shared_int->shared_intr_buf,
3279 			 1,
3280 			 intr_callback, shared_int,
3281 			 shared_int->intr_endp->bInterval);
3282 
3283 	result = usb_submit_urb(shared_int->shared_intr_urb, gfp);
3284 	if (result)
3285 		dev_warn(&usb->dev, "%s failed mux_intr_urb %d\n", __func__,
3286 			result);
3287 
3288 	return result;
3289 }
3290 
3291 /* operations setup of the serial interface */
3292 static const struct tty_operations hso_serial_ops = {
3293 	.open = hso_serial_open,
3294 	.close = hso_serial_close,
3295 	.write = hso_serial_write,
3296 	.write_room = hso_serial_write_room,
3297 	.ioctl = hso_serial_ioctl,
3298 	.set_termios = hso_serial_set_termios,
3299 	.chars_in_buffer = hso_serial_chars_in_buffer,
3300 	.tiocmget = hso_serial_tiocmget,
3301 	.tiocmset = hso_serial_tiocmset,
3302 	.unthrottle = hso_unthrottle
3303 };
3304 
3305 static struct usb_driver hso_driver = {
3306 	.name = driver_name,
3307 	.probe = hso_probe,
3308 	.disconnect = hso_disconnect,
3309 	.id_table = hso_ids,
3310 	.suspend = hso_suspend,
3311 	.resume = hso_resume,
3312 	.reset_resume = hso_resume,
3313 	.supports_autosuspend = 1,
3314 };
3315 
3316 static int __init hso_init(void)
3317 {
3318 	int i;
3319 	int result;
3320 
3321 	/* put it in the log */
3322 	printk(KERN_INFO "hso: %s\n", version);
3323 
3324 	/* Initialise the serial table semaphore and table */
3325 	spin_lock_init(&serial_table_lock);
3326 	for (i = 0; i < HSO_SERIAL_TTY_MINORS; i++)
3327 		serial_table[i] = NULL;
3328 
3329 	/* allocate our driver using the proper amount of supported minors */
3330 	tty_drv = alloc_tty_driver(HSO_SERIAL_TTY_MINORS);
3331 	if (!tty_drv)
3332 		return -ENOMEM;
3333 
3334 	/* fill in all needed values */
3335 	tty_drv->magic = TTY_DRIVER_MAGIC;
3336 	tty_drv->owner = THIS_MODULE;
3337 	tty_drv->driver_name = driver_name;
3338 	tty_drv->name = tty_filename;
3339 
3340 	/* if major number is provided as parameter, use that one */
3341 	if (tty_major)
3342 		tty_drv->major = tty_major;
3343 
3344 	tty_drv->minor_start = 0;
3345 	tty_drv->num = HSO_SERIAL_TTY_MINORS;
3346 	tty_drv->type = TTY_DRIVER_TYPE_SERIAL;
3347 	tty_drv->subtype = SERIAL_TYPE_NORMAL;
3348 	tty_drv->flags = TTY_DRIVER_REAL_RAW | TTY_DRIVER_DYNAMIC_DEV;
3349 	tty_drv->init_termios = tty_std_termios;
3350 	hso_init_termios(&tty_drv->init_termios);
3351 	tty_set_operations(tty_drv, &hso_serial_ops);
3352 
3353 	/* register the tty driver */
3354 	result = tty_register_driver(tty_drv);
3355 	if (result) {
3356 		printk(KERN_ERR "%s - tty_register_driver failed(%d)\n",
3357 			__func__, result);
3358 		return result;
3359 	}
3360 
3361 	/* register this module as an usb driver */
3362 	result = usb_register(&hso_driver);
3363 	if (result) {
3364 		printk(KERN_ERR "Could not register hso driver? error: %d\n",
3365 			result);
3366 		/* cleanup serial interface */
3367 		tty_unregister_driver(tty_drv);
3368 		return result;
3369 	}
3370 
3371 	/* done */
3372 	return 0;
3373 }
3374 
3375 static void __exit hso_exit(void)
3376 {
3377 	printk(KERN_INFO "hso: unloaded\n");
3378 
3379 	tty_unregister_driver(tty_drv);
3380 	/* deregister the usb driver */
3381 	usb_deregister(&hso_driver);
3382 }
3383 
3384 /* Module definitions */
3385 module_init(hso_init);
3386 module_exit(hso_exit);
3387 
3388 MODULE_AUTHOR(MOD_AUTHOR);
3389 MODULE_DESCRIPTION(MOD_DESCRIPTION);
3390 MODULE_LICENSE(MOD_LICENSE);
3391 MODULE_INFO(Version, DRIVER_VERSION);
3392 
3393 /* change the debug level (eg: insmod hso.ko debug=0x04) */
3394 MODULE_PARM_DESC(debug, "Level of debug [0x01 | 0x02 | 0x04 | 0x08 | 0x10]");
3395 module_param(debug, int, S_IRUGO | S_IWUSR);
3396 
3397 /* set the major tty number (eg: insmod hso.ko tty_major=245) */
3398 MODULE_PARM_DESC(tty_major, "Set the major tty number");
3399 module_param(tty_major, int, S_IRUGO | S_IWUSR);
3400 
3401 /* disable network interface (eg: insmod hso.ko disable_net=1) */
3402 MODULE_PARM_DESC(disable_net, "Disable the network interface");
3403 module_param(disable_net, int, S_IRUGO | S_IWUSR);
3404