xref: /linux/drivers/net/phy/rockchip.c (revision 6c8c1406a6d6a3f2e61ac590f5c0994231bc6be7)
1 // SPDX-License-Identifier: GPL-2.0+
2 /*
3  * drivers/net/phy/rockchip.c
4  *
5  * Driver for ROCKCHIP Ethernet PHYs
6  *
7  * Copyright (c) 2017, Fuzhou Rockchip Electronics Co., Ltd
8  *
9  * David Wu <david.wu@rock-chips.com>
10  */
11 
12 #include <linux/ethtool.h>
13 #include <linux/kernel.h>
14 #include <linux/module.h>
15 #include <linux/mii.h>
16 #include <linux/netdevice.h>
17 #include <linux/phy.h>
18 
19 #define INTERNAL_EPHY_ID			0x1234d400
20 
21 #define MII_INTERNAL_CTRL_STATUS		17
22 #define SMI_ADDR_TSTCNTL			20
23 #define SMI_ADDR_TSTREAD1			21
24 #define SMI_ADDR_TSTREAD2			22
25 #define SMI_ADDR_TSTWRITE			23
26 #define MII_SPECIAL_CONTROL_STATUS		31
27 
28 #define MII_AUTO_MDIX_EN			BIT(7)
29 #define MII_MDIX_EN				BIT(6)
30 
31 #define MII_SPEED_10				BIT(2)
32 #define MII_SPEED_100				BIT(3)
33 
34 #define TSTCNTL_RD				(BIT(15) | BIT(10))
35 #define TSTCNTL_WR				(BIT(14) | BIT(10))
36 
37 #define TSTMODE_ENABLE				0x400
38 #define TSTMODE_DISABLE				0x0
39 
40 #define WR_ADDR_A7CFG				0x18
41 
42 static int rockchip_init_tstmode(struct phy_device *phydev)
43 {
44 	int ret;
45 
46 	/* Enable access to Analog and DSP register banks */
47 	ret = phy_write(phydev, SMI_ADDR_TSTCNTL, TSTMODE_ENABLE);
48 	if (ret)
49 		return ret;
50 
51 	ret = phy_write(phydev, SMI_ADDR_TSTCNTL, TSTMODE_DISABLE);
52 	if (ret)
53 		return ret;
54 
55 	return phy_write(phydev, SMI_ADDR_TSTCNTL, TSTMODE_ENABLE);
56 }
57 
58 static int rockchip_close_tstmode(struct phy_device *phydev)
59 {
60 	/* Back to basic register bank */
61 	return phy_write(phydev, SMI_ADDR_TSTCNTL, TSTMODE_DISABLE);
62 }
63 
64 static int rockchip_integrated_phy_analog_init(struct phy_device *phydev)
65 {
66 	int ret;
67 
68 	ret = rockchip_init_tstmode(phydev);
69 	if (ret)
70 		return ret;
71 
72 	/*
73 	 * Adjust tx amplitude to make sginal better,
74 	 * the default value is 0x8.
75 	 */
76 	ret = phy_write(phydev, SMI_ADDR_TSTWRITE, 0xB);
77 	if (ret)
78 		return ret;
79 	ret = phy_write(phydev, SMI_ADDR_TSTCNTL, TSTCNTL_WR | WR_ADDR_A7CFG);
80 	if (ret)
81 		return ret;
82 
83 	return rockchip_close_tstmode(phydev);
84 }
85 
86 static int rockchip_integrated_phy_config_init(struct phy_device *phydev)
87 {
88 	int val, ret;
89 
90 	/*
91 	 * The auto MIDX has linked problem on some board,
92 	 * workround to disable auto MDIX.
93 	 */
94 	val = phy_read(phydev, MII_INTERNAL_CTRL_STATUS);
95 	if (val < 0)
96 		return val;
97 	val &= ~MII_AUTO_MDIX_EN;
98 	ret = phy_write(phydev, MII_INTERNAL_CTRL_STATUS, val);
99 	if (ret)
100 		return ret;
101 
102 	return rockchip_integrated_phy_analog_init(phydev);
103 }
104 
105 static void rockchip_link_change_notify(struct phy_device *phydev)
106 {
107 	/*
108 	 * If mode switch happens from 10BT to 100BT, all DSP/AFE
109 	 * registers are set to default values. So any AFE/DSP
110 	 * registers have to be re-initialized in this case.
111 	 */
112 	if (phydev->state == PHY_RUNNING && phydev->speed == SPEED_100) {
113 		int ret = rockchip_integrated_phy_analog_init(phydev);
114 
115 		if (ret)
116 			phydev_err(phydev, "rockchip_integrated_phy_analog_init err: %d.\n",
117 				   ret);
118 	}
119 }
120 
121 static int rockchip_set_polarity(struct phy_device *phydev, int polarity)
122 {
123 	int reg, err, val;
124 
125 	/* get the current settings */
126 	reg = phy_read(phydev, MII_INTERNAL_CTRL_STATUS);
127 	if (reg < 0)
128 		return reg;
129 
130 	reg &= ~MII_AUTO_MDIX_EN;
131 	val = reg;
132 	switch (polarity) {
133 	case ETH_TP_MDI:
134 		val &= ~MII_MDIX_EN;
135 		break;
136 	case ETH_TP_MDI_X:
137 		val |= MII_MDIX_EN;
138 		break;
139 	case ETH_TP_MDI_AUTO:
140 	case ETH_TP_MDI_INVALID:
141 	default:
142 		return 0;
143 	}
144 
145 	if (val != reg) {
146 		/* Set the new polarity value in the register */
147 		err = phy_write(phydev, MII_INTERNAL_CTRL_STATUS, val);
148 		if (err)
149 			return err;
150 	}
151 
152 	return 0;
153 }
154 
155 static int rockchip_config_aneg(struct phy_device *phydev)
156 {
157 	int err;
158 
159 	err = rockchip_set_polarity(phydev, phydev->mdix);
160 	if (err < 0)
161 		return err;
162 
163 	return genphy_config_aneg(phydev);
164 }
165 
166 static int rockchip_phy_resume(struct phy_device *phydev)
167 {
168 	genphy_resume(phydev);
169 
170 	return rockchip_integrated_phy_config_init(phydev);
171 }
172 
173 static struct phy_driver rockchip_phy_driver[] = {
174 {
175 	.phy_id			= INTERNAL_EPHY_ID,
176 	.phy_id_mask		= 0xfffffff0,
177 	.name			= "Rockchip integrated EPHY",
178 	/* PHY_BASIC_FEATURES */
179 	.flags			= 0,
180 	.link_change_notify	= rockchip_link_change_notify,
181 	.soft_reset		= genphy_soft_reset,
182 	.config_init		= rockchip_integrated_phy_config_init,
183 	.config_aneg		= rockchip_config_aneg,
184 	.suspend		= genphy_suspend,
185 	.resume			= rockchip_phy_resume,
186 },
187 };
188 
189 module_phy_driver(rockchip_phy_driver);
190 
191 static struct mdio_device_id __maybe_unused rockchip_phy_tbl[] = {
192 	{ INTERNAL_EPHY_ID, 0xfffffff0 },
193 	{ }
194 };
195 
196 MODULE_DEVICE_TABLE(mdio, rockchip_phy_tbl);
197 
198 MODULE_AUTHOR("David Wu <david.wu@rock-chips.com>");
199 MODULE_DESCRIPTION("Rockchip Ethernet PHY driver");
200 MODULE_LICENSE("GPL");
201