1 // SPDX-License-Identifier: GPL-2.0 2 /* 3 * phylink models the MAC to optional PHY connection, supporting 4 * technologies such as SFP cages where the PHY is hot-pluggable. 5 * 6 * Copyright (C) 2015 Russell King 7 */ 8 #include <linux/acpi.h> 9 #include <linux/ethtool.h> 10 #include <linux/export.h> 11 #include <linux/gpio/consumer.h> 12 #include <linux/netdevice.h> 13 #include <linux/of.h> 14 #include <linux/of_mdio.h> 15 #include <linux/phy.h> 16 #include <linux/phy_fixed.h> 17 #include <linux/phylink.h> 18 #include <linux/rtnetlink.h> 19 #include <linux/spinlock.h> 20 #include <linux/timer.h> 21 #include <linux/workqueue.h> 22 23 #include "sfp.h" 24 #include "swphy.h" 25 26 #define SUPPORTED_INTERFACES \ 27 (SUPPORTED_TP | SUPPORTED_MII | SUPPORTED_FIBRE | \ 28 SUPPORTED_BNC | SUPPORTED_AUI | SUPPORTED_Backplane) 29 #define ADVERTISED_INTERFACES \ 30 (ADVERTISED_TP | ADVERTISED_MII | ADVERTISED_FIBRE | \ 31 ADVERTISED_BNC | ADVERTISED_AUI | ADVERTISED_Backplane) 32 33 enum { 34 PHYLINK_DISABLE_STOPPED, 35 PHYLINK_DISABLE_LINK, 36 PHYLINK_DISABLE_MAC_WOL, 37 38 PCS_STATE_DOWN = 0, 39 PCS_STATE_STARTING, 40 PCS_STATE_STARTED, 41 }; 42 43 /** 44 * struct phylink - internal data type for phylink 45 */ 46 struct phylink { 47 /* private: */ 48 struct net_device *netdev; 49 const struct phylink_mac_ops *mac_ops; 50 struct phylink_config *config; 51 struct phylink_pcs *pcs; 52 struct device *dev; 53 unsigned int old_link_state:1; 54 55 unsigned long phylink_disable_state; /* bitmask of disables */ 56 struct phy_device *phydev; 57 phy_interface_t link_interface; /* PHY_INTERFACE_xxx */ 58 u8 cfg_link_an_mode; /* MLO_AN_xxx */ 59 u8 cur_link_an_mode; 60 u8 link_port; /* The current non-phy ethtool port */ 61 __ETHTOOL_DECLARE_LINK_MODE_MASK(supported); 62 63 /* The link configuration settings */ 64 struct phylink_link_state link_config; 65 66 /* The current settings */ 67 phy_interface_t cur_interface; 68 69 struct gpio_desc *link_gpio; 70 unsigned int link_irq; 71 struct timer_list link_poll; 72 void (*get_fixed_state)(struct net_device *dev, 73 struct phylink_link_state *s); 74 75 struct mutex state_mutex; 76 struct phylink_link_state phy_state; 77 struct work_struct resolve; 78 unsigned int pcs_neg_mode; 79 unsigned int pcs_state; 80 81 bool mac_link_dropped; 82 bool using_mac_select_pcs; 83 84 struct sfp_bus *sfp_bus; 85 bool sfp_may_have_phy; 86 DECLARE_PHY_INTERFACE_MASK(sfp_interfaces); 87 __ETHTOOL_DECLARE_LINK_MODE_MASK(sfp_support); 88 u8 sfp_port; 89 }; 90 91 #define phylink_printk(level, pl, fmt, ...) \ 92 do { \ 93 if ((pl)->config->type == PHYLINK_NETDEV) \ 94 netdev_printk(level, (pl)->netdev, fmt, ##__VA_ARGS__); \ 95 else if ((pl)->config->type == PHYLINK_DEV) \ 96 dev_printk(level, (pl)->dev, fmt, ##__VA_ARGS__); \ 97 } while (0) 98 99 #define phylink_err(pl, fmt, ...) \ 100 phylink_printk(KERN_ERR, pl, fmt, ##__VA_ARGS__) 101 #define phylink_warn(pl, fmt, ...) \ 102 phylink_printk(KERN_WARNING, pl, fmt, ##__VA_ARGS__) 103 #define phylink_info(pl, fmt, ...) \ 104 phylink_printk(KERN_INFO, pl, fmt, ##__VA_ARGS__) 105 #if defined(CONFIG_DYNAMIC_DEBUG) 106 #define phylink_dbg(pl, fmt, ...) \ 107 do { \ 108 if ((pl)->config->type == PHYLINK_NETDEV) \ 109 netdev_dbg((pl)->netdev, fmt, ##__VA_ARGS__); \ 110 else if ((pl)->config->type == PHYLINK_DEV) \ 111 dev_dbg((pl)->dev, fmt, ##__VA_ARGS__); \ 112 } while (0) 113 #elif defined(DEBUG) 114 #define phylink_dbg(pl, fmt, ...) \ 115 phylink_printk(KERN_DEBUG, pl, fmt, ##__VA_ARGS__) 116 #else 117 #define phylink_dbg(pl, fmt, ...) \ 118 ({ \ 119 if (0) \ 120 phylink_printk(KERN_DEBUG, pl, fmt, ##__VA_ARGS__); \ 121 }) 122 #endif 123 124 static const phy_interface_t phylink_sfp_interface_preference[] = { 125 PHY_INTERFACE_MODE_25GBASER, 126 PHY_INTERFACE_MODE_USXGMII, 127 PHY_INTERFACE_MODE_10GBASER, 128 PHY_INTERFACE_MODE_5GBASER, 129 PHY_INTERFACE_MODE_2500BASEX, 130 PHY_INTERFACE_MODE_SGMII, 131 PHY_INTERFACE_MODE_1000BASEX, 132 PHY_INTERFACE_MODE_100BASEX, 133 }; 134 135 static DECLARE_PHY_INTERFACE_MASK(phylink_sfp_interfaces); 136 137 /** 138 * phylink_set_port_modes() - set the port type modes in the ethtool mask 139 * @mask: ethtool link mode mask 140 * 141 * Sets all the port type modes in the ethtool mask. MAC drivers should 142 * use this in their 'validate' callback. 143 */ 144 void phylink_set_port_modes(unsigned long *mask) 145 { 146 phylink_set(mask, TP); 147 phylink_set(mask, AUI); 148 phylink_set(mask, MII); 149 phylink_set(mask, FIBRE); 150 phylink_set(mask, BNC); 151 phylink_set(mask, Backplane); 152 } 153 EXPORT_SYMBOL_GPL(phylink_set_port_modes); 154 155 static int phylink_is_empty_linkmode(const unsigned long *linkmode) 156 { 157 __ETHTOOL_DECLARE_LINK_MODE_MASK(tmp) = { 0, }; 158 159 phylink_set_port_modes(tmp); 160 phylink_set(tmp, Autoneg); 161 phylink_set(tmp, Pause); 162 phylink_set(tmp, Asym_Pause); 163 164 return linkmode_subset(linkmode, tmp); 165 } 166 167 static const char *phylink_an_mode_str(unsigned int mode) 168 { 169 static const char *modestr[] = { 170 [MLO_AN_PHY] = "phy", 171 [MLO_AN_FIXED] = "fixed", 172 [MLO_AN_INBAND] = "inband", 173 }; 174 175 return mode < ARRAY_SIZE(modestr) ? modestr[mode] : "unknown"; 176 } 177 178 static unsigned int phylink_interface_signal_rate(phy_interface_t interface) 179 { 180 switch (interface) { 181 case PHY_INTERFACE_MODE_SGMII: 182 case PHY_INTERFACE_MODE_1000BASEX: /* 1.25Mbd */ 183 return 1250; 184 case PHY_INTERFACE_MODE_2500BASEX: /* 3.125Mbd */ 185 return 3125; 186 case PHY_INTERFACE_MODE_5GBASER: /* 5.15625Mbd */ 187 return 5156; 188 case PHY_INTERFACE_MODE_10GBASER: /* 10.3125Mbd */ 189 return 10313; 190 default: 191 return 0; 192 } 193 } 194 195 /** 196 * phylink_interface_max_speed() - get the maximum speed of a phy interface 197 * @interface: phy interface mode defined by &typedef phy_interface_t 198 * 199 * Determine the maximum speed of a phy interface. This is intended to help 200 * determine the correct speed to pass to the MAC when the phy is performing 201 * rate matching. 202 * 203 * Return: The maximum speed of @interface 204 */ 205 static int phylink_interface_max_speed(phy_interface_t interface) 206 { 207 switch (interface) { 208 case PHY_INTERFACE_MODE_100BASEX: 209 case PHY_INTERFACE_MODE_REVRMII: 210 case PHY_INTERFACE_MODE_RMII: 211 case PHY_INTERFACE_MODE_SMII: 212 case PHY_INTERFACE_MODE_REVMII: 213 case PHY_INTERFACE_MODE_MII: 214 return SPEED_100; 215 216 case PHY_INTERFACE_MODE_TBI: 217 case PHY_INTERFACE_MODE_MOCA: 218 case PHY_INTERFACE_MODE_RTBI: 219 case PHY_INTERFACE_MODE_1000BASEX: 220 case PHY_INTERFACE_MODE_1000BASEKX: 221 case PHY_INTERFACE_MODE_TRGMII: 222 case PHY_INTERFACE_MODE_RGMII_TXID: 223 case PHY_INTERFACE_MODE_RGMII_RXID: 224 case PHY_INTERFACE_MODE_RGMII_ID: 225 case PHY_INTERFACE_MODE_RGMII: 226 case PHY_INTERFACE_MODE_PSGMII: 227 case PHY_INTERFACE_MODE_QSGMII: 228 case PHY_INTERFACE_MODE_QUSGMII: 229 case PHY_INTERFACE_MODE_SGMII: 230 case PHY_INTERFACE_MODE_GMII: 231 return SPEED_1000; 232 233 case PHY_INTERFACE_MODE_2500BASEX: 234 return SPEED_2500; 235 236 case PHY_INTERFACE_MODE_5GBASER: 237 return SPEED_5000; 238 239 case PHY_INTERFACE_MODE_XGMII: 240 case PHY_INTERFACE_MODE_RXAUI: 241 case PHY_INTERFACE_MODE_XAUI: 242 case PHY_INTERFACE_MODE_10GBASER: 243 case PHY_INTERFACE_MODE_10GKR: 244 case PHY_INTERFACE_MODE_USXGMII: 245 return SPEED_10000; 246 247 case PHY_INTERFACE_MODE_25GBASER: 248 return SPEED_25000; 249 250 case PHY_INTERFACE_MODE_XLGMII: 251 return SPEED_40000; 252 253 case PHY_INTERFACE_MODE_INTERNAL: 254 case PHY_INTERFACE_MODE_NA: 255 case PHY_INTERFACE_MODE_MAX: 256 /* No idea! Garbage in, unknown out */ 257 return SPEED_UNKNOWN; 258 } 259 260 /* If we get here, someone forgot to add an interface mode above */ 261 WARN_ON_ONCE(1); 262 return SPEED_UNKNOWN; 263 } 264 265 /** 266 * phylink_caps_to_linkmodes() - Convert capabilities to ethtool link modes 267 * @linkmodes: ethtool linkmode mask (must be already initialised) 268 * @caps: bitmask of MAC capabilities 269 * 270 * Set all possible pause, speed and duplex linkmodes in @linkmodes that are 271 * supported by the @caps. @linkmodes must have been initialised previously. 272 */ 273 static void phylink_caps_to_linkmodes(unsigned long *linkmodes, 274 unsigned long caps) 275 { 276 if (caps & MAC_SYM_PAUSE) 277 __set_bit(ETHTOOL_LINK_MODE_Pause_BIT, linkmodes); 278 279 if (caps & MAC_ASYM_PAUSE) 280 __set_bit(ETHTOOL_LINK_MODE_Asym_Pause_BIT, linkmodes); 281 282 if (caps & MAC_10HD) { 283 __set_bit(ETHTOOL_LINK_MODE_10baseT_Half_BIT, linkmodes); 284 __set_bit(ETHTOOL_LINK_MODE_10baseT1S_Half_BIT, linkmodes); 285 __set_bit(ETHTOOL_LINK_MODE_10baseT1S_P2MP_Half_BIT, linkmodes); 286 } 287 288 if (caps & MAC_10FD) { 289 __set_bit(ETHTOOL_LINK_MODE_10baseT_Full_BIT, linkmodes); 290 __set_bit(ETHTOOL_LINK_MODE_10baseT1L_Full_BIT, linkmodes); 291 __set_bit(ETHTOOL_LINK_MODE_10baseT1S_Full_BIT, linkmodes); 292 } 293 294 if (caps & MAC_100HD) { 295 __set_bit(ETHTOOL_LINK_MODE_100baseT_Half_BIT, linkmodes); 296 __set_bit(ETHTOOL_LINK_MODE_100baseFX_Half_BIT, linkmodes); 297 } 298 299 if (caps & MAC_100FD) { 300 __set_bit(ETHTOOL_LINK_MODE_100baseT_Full_BIT, linkmodes); 301 __set_bit(ETHTOOL_LINK_MODE_100baseT1_Full_BIT, linkmodes); 302 __set_bit(ETHTOOL_LINK_MODE_100baseFX_Full_BIT, linkmodes); 303 } 304 305 if (caps & MAC_1000HD) 306 __set_bit(ETHTOOL_LINK_MODE_1000baseT_Half_BIT, linkmodes); 307 308 if (caps & MAC_1000FD) { 309 __set_bit(ETHTOOL_LINK_MODE_1000baseT_Full_BIT, linkmodes); 310 __set_bit(ETHTOOL_LINK_MODE_1000baseKX_Full_BIT, linkmodes); 311 __set_bit(ETHTOOL_LINK_MODE_1000baseX_Full_BIT, linkmodes); 312 __set_bit(ETHTOOL_LINK_MODE_1000baseT1_Full_BIT, linkmodes); 313 } 314 315 if (caps & MAC_2500FD) { 316 __set_bit(ETHTOOL_LINK_MODE_2500baseT_Full_BIT, linkmodes); 317 __set_bit(ETHTOOL_LINK_MODE_2500baseX_Full_BIT, linkmodes); 318 } 319 320 if (caps & MAC_5000FD) 321 __set_bit(ETHTOOL_LINK_MODE_5000baseT_Full_BIT, linkmodes); 322 323 if (caps & MAC_10000FD) { 324 __set_bit(ETHTOOL_LINK_MODE_10000baseT_Full_BIT, linkmodes); 325 __set_bit(ETHTOOL_LINK_MODE_10000baseKX4_Full_BIT, linkmodes); 326 __set_bit(ETHTOOL_LINK_MODE_10000baseKR_Full_BIT, linkmodes); 327 __set_bit(ETHTOOL_LINK_MODE_10000baseR_FEC_BIT, linkmodes); 328 __set_bit(ETHTOOL_LINK_MODE_10000baseCR_Full_BIT, linkmodes); 329 __set_bit(ETHTOOL_LINK_MODE_10000baseSR_Full_BIT, linkmodes); 330 __set_bit(ETHTOOL_LINK_MODE_10000baseLR_Full_BIT, linkmodes); 331 __set_bit(ETHTOOL_LINK_MODE_10000baseLRM_Full_BIT, linkmodes); 332 __set_bit(ETHTOOL_LINK_MODE_10000baseER_Full_BIT, linkmodes); 333 } 334 335 if (caps & MAC_25000FD) { 336 __set_bit(ETHTOOL_LINK_MODE_25000baseCR_Full_BIT, linkmodes); 337 __set_bit(ETHTOOL_LINK_MODE_25000baseKR_Full_BIT, linkmodes); 338 __set_bit(ETHTOOL_LINK_MODE_25000baseSR_Full_BIT, linkmodes); 339 } 340 341 if (caps & MAC_40000FD) { 342 __set_bit(ETHTOOL_LINK_MODE_40000baseKR4_Full_BIT, linkmodes); 343 __set_bit(ETHTOOL_LINK_MODE_40000baseCR4_Full_BIT, linkmodes); 344 __set_bit(ETHTOOL_LINK_MODE_40000baseSR4_Full_BIT, linkmodes); 345 __set_bit(ETHTOOL_LINK_MODE_40000baseLR4_Full_BIT, linkmodes); 346 } 347 348 if (caps & MAC_50000FD) { 349 __set_bit(ETHTOOL_LINK_MODE_50000baseCR2_Full_BIT, linkmodes); 350 __set_bit(ETHTOOL_LINK_MODE_50000baseKR2_Full_BIT, linkmodes); 351 __set_bit(ETHTOOL_LINK_MODE_50000baseSR2_Full_BIT, linkmodes); 352 __set_bit(ETHTOOL_LINK_MODE_50000baseKR_Full_BIT, linkmodes); 353 __set_bit(ETHTOOL_LINK_MODE_50000baseSR_Full_BIT, linkmodes); 354 __set_bit(ETHTOOL_LINK_MODE_50000baseCR_Full_BIT, linkmodes); 355 __set_bit(ETHTOOL_LINK_MODE_50000baseLR_ER_FR_Full_BIT, 356 linkmodes); 357 __set_bit(ETHTOOL_LINK_MODE_50000baseDR_Full_BIT, linkmodes); 358 } 359 360 if (caps & MAC_56000FD) { 361 __set_bit(ETHTOOL_LINK_MODE_56000baseKR4_Full_BIT, linkmodes); 362 __set_bit(ETHTOOL_LINK_MODE_56000baseCR4_Full_BIT, linkmodes); 363 __set_bit(ETHTOOL_LINK_MODE_56000baseSR4_Full_BIT, linkmodes); 364 __set_bit(ETHTOOL_LINK_MODE_56000baseLR4_Full_BIT, linkmodes); 365 } 366 367 if (caps & MAC_100000FD) { 368 __set_bit(ETHTOOL_LINK_MODE_100000baseKR4_Full_BIT, linkmodes); 369 __set_bit(ETHTOOL_LINK_MODE_100000baseSR4_Full_BIT, linkmodes); 370 __set_bit(ETHTOOL_LINK_MODE_100000baseCR4_Full_BIT, linkmodes); 371 __set_bit(ETHTOOL_LINK_MODE_100000baseLR4_ER4_Full_BIT, 372 linkmodes); 373 __set_bit(ETHTOOL_LINK_MODE_100000baseKR2_Full_BIT, linkmodes); 374 __set_bit(ETHTOOL_LINK_MODE_100000baseSR2_Full_BIT, linkmodes); 375 __set_bit(ETHTOOL_LINK_MODE_100000baseCR2_Full_BIT, linkmodes); 376 __set_bit(ETHTOOL_LINK_MODE_100000baseLR2_ER2_FR2_Full_BIT, 377 linkmodes); 378 __set_bit(ETHTOOL_LINK_MODE_100000baseDR2_Full_BIT, linkmodes); 379 __set_bit(ETHTOOL_LINK_MODE_100000baseKR_Full_BIT, linkmodes); 380 __set_bit(ETHTOOL_LINK_MODE_100000baseSR_Full_BIT, linkmodes); 381 __set_bit(ETHTOOL_LINK_MODE_100000baseLR_ER_FR_Full_BIT, 382 linkmodes); 383 __set_bit(ETHTOOL_LINK_MODE_100000baseCR_Full_BIT, linkmodes); 384 __set_bit(ETHTOOL_LINK_MODE_100000baseDR_Full_BIT, linkmodes); 385 } 386 387 if (caps & MAC_200000FD) { 388 __set_bit(ETHTOOL_LINK_MODE_200000baseKR4_Full_BIT, linkmodes); 389 __set_bit(ETHTOOL_LINK_MODE_200000baseSR4_Full_BIT, linkmodes); 390 __set_bit(ETHTOOL_LINK_MODE_200000baseLR4_ER4_FR4_Full_BIT, 391 linkmodes); 392 __set_bit(ETHTOOL_LINK_MODE_200000baseDR4_Full_BIT, linkmodes); 393 __set_bit(ETHTOOL_LINK_MODE_200000baseCR4_Full_BIT, linkmodes); 394 __set_bit(ETHTOOL_LINK_MODE_200000baseKR2_Full_BIT, linkmodes); 395 __set_bit(ETHTOOL_LINK_MODE_200000baseSR2_Full_BIT, linkmodes); 396 __set_bit(ETHTOOL_LINK_MODE_200000baseLR2_ER2_FR2_Full_BIT, 397 linkmodes); 398 __set_bit(ETHTOOL_LINK_MODE_200000baseDR2_Full_BIT, linkmodes); 399 __set_bit(ETHTOOL_LINK_MODE_200000baseCR2_Full_BIT, linkmodes); 400 } 401 402 if (caps & MAC_400000FD) { 403 __set_bit(ETHTOOL_LINK_MODE_400000baseKR8_Full_BIT, linkmodes); 404 __set_bit(ETHTOOL_LINK_MODE_400000baseSR8_Full_BIT, linkmodes); 405 __set_bit(ETHTOOL_LINK_MODE_400000baseLR8_ER8_FR8_Full_BIT, 406 linkmodes); 407 __set_bit(ETHTOOL_LINK_MODE_400000baseDR8_Full_BIT, linkmodes); 408 __set_bit(ETHTOOL_LINK_MODE_400000baseCR8_Full_BIT, linkmodes); 409 __set_bit(ETHTOOL_LINK_MODE_400000baseKR4_Full_BIT, linkmodes); 410 __set_bit(ETHTOOL_LINK_MODE_400000baseSR4_Full_BIT, linkmodes); 411 __set_bit(ETHTOOL_LINK_MODE_400000baseLR4_ER4_FR4_Full_BIT, 412 linkmodes); 413 __set_bit(ETHTOOL_LINK_MODE_400000baseDR4_Full_BIT, linkmodes); 414 __set_bit(ETHTOOL_LINK_MODE_400000baseCR4_Full_BIT, linkmodes); 415 } 416 } 417 418 static struct { 419 unsigned long mask; 420 int speed; 421 unsigned int duplex; 422 } phylink_caps_params[] = { 423 { MAC_400000FD, SPEED_400000, DUPLEX_FULL }, 424 { MAC_200000FD, SPEED_200000, DUPLEX_FULL }, 425 { MAC_100000FD, SPEED_100000, DUPLEX_FULL }, 426 { MAC_56000FD, SPEED_56000, DUPLEX_FULL }, 427 { MAC_50000FD, SPEED_50000, DUPLEX_FULL }, 428 { MAC_40000FD, SPEED_40000, DUPLEX_FULL }, 429 { MAC_25000FD, SPEED_25000, DUPLEX_FULL }, 430 { MAC_20000FD, SPEED_20000, DUPLEX_FULL }, 431 { MAC_10000FD, SPEED_10000, DUPLEX_FULL }, 432 { MAC_5000FD, SPEED_5000, DUPLEX_FULL }, 433 { MAC_2500FD, SPEED_2500, DUPLEX_FULL }, 434 { MAC_1000FD, SPEED_1000, DUPLEX_FULL }, 435 { MAC_1000HD, SPEED_1000, DUPLEX_HALF }, 436 { MAC_100FD, SPEED_100, DUPLEX_FULL }, 437 { MAC_100HD, SPEED_100, DUPLEX_HALF }, 438 { MAC_10FD, SPEED_10, DUPLEX_FULL }, 439 { MAC_10HD, SPEED_10, DUPLEX_HALF }, 440 }; 441 442 /** 443 * phylink_limit_mac_speed - limit the phylink_config to a maximum speed 444 * @config: pointer to a &struct phylink_config 445 * @max_speed: maximum speed 446 * 447 * Mask off MAC capabilities for speeds higher than the @max_speed parameter. 448 * Any further motifications of config.mac_capabilities will override this. 449 */ 450 void phylink_limit_mac_speed(struct phylink_config *config, u32 max_speed) 451 { 452 int i; 453 454 for (i = 0; i < ARRAY_SIZE(phylink_caps_params) && 455 phylink_caps_params[i].speed > max_speed; i++) 456 config->mac_capabilities &= ~phylink_caps_params[i].mask; 457 } 458 EXPORT_SYMBOL_GPL(phylink_limit_mac_speed); 459 460 /** 461 * phylink_cap_from_speed_duplex - Get mac capability from speed/duplex 462 * @speed: the speed to search for 463 * @duplex: the duplex to search for 464 * 465 * Find the mac capability for a given speed and duplex. 466 * 467 * Return: A mask with the mac capability patching @speed and @duplex, or 0 if 468 * there were no matches. 469 */ 470 static unsigned long phylink_cap_from_speed_duplex(int speed, 471 unsigned int duplex) 472 { 473 int i; 474 475 for (i = 0; i < ARRAY_SIZE(phylink_caps_params); i++) { 476 if (speed == phylink_caps_params[i].speed && 477 duplex == phylink_caps_params[i].duplex) 478 return phylink_caps_params[i].mask; 479 } 480 481 return 0; 482 } 483 484 /** 485 * phylink_get_capabilities() - get capabilities for a given MAC 486 * @interface: phy interface mode defined by &typedef phy_interface_t 487 * @mac_capabilities: bitmask of MAC capabilities 488 * @rate_matching: type of rate matching being performed 489 * 490 * Get the MAC capabilities that are supported by the @interface mode and 491 * @mac_capabilities. 492 */ 493 static unsigned long phylink_get_capabilities(phy_interface_t interface, 494 unsigned long mac_capabilities, 495 int rate_matching) 496 { 497 int max_speed = phylink_interface_max_speed(interface); 498 unsigned long caps = MAC_SYM_PAUSE | MAC_ASYM_PAUSE; 499 unsigned long matched_caps = 0; 500 501 switch (interface) { 502 case PHY_INTERFACE_MODE_USXGMII: 503 caps |= MAC_10000FD | MAC_5000FD | MAC_2500FD; 504 fallthrough; 505 506 case PHY_INTERFACE_MODE_RGMII_TXID: 507 case PHY_INTERFACE_MODE_RGMII_RXID: 508 case PHY_INTERFACE_MODE_RGMII_ID: 509 case PHY_INTERFACE_MODE_RGMII: 510 case PHY_INTERFACE_MODE_PSGMII: 511 case PHY_INTERFACE_MODE_QSGMII: 512 case PHY_INTERFACE_MODE_QUSGMII: 513 case PHY_INTERFACE_MODE_SGMII: 514 case PHY_INTERFACE_MODE_GMII: 515 caps |= MAC_1000HD | MAC_1000FD; 516 fallthrough; 517 518 case PHY_INTERFACE_MODE_REVRMII: 519 case PHY_INTERFACE_MODE_RMII: 520 case PHY_INTERFACE_MODE_SMII: 521 case PHY_INTERFACE_MODE_REVMII: 522 case PHY_INTERFACE_MODE_MII: 523 caps |= MAC_10HD | MAC_10FD; 524 fallthrough; 525 526 case PHY_INTERFACE_MODE_100BASEX: 527 caps |= MAC_100HD | MAC_100FD; 528 break; 529 530 case PHY_INTERFACE_MODE_TBI: 531 case PHY_INTERFACE_MODE_MOCA: 532 case PHY_INTERFACE_MODE_RTBI: 533 case PHY_INTERFACE_MODE_1000BASEX: 534 caps |= MAC_1000HD; 535 fallthrough; 536 case PHY_INTERFACE_MODE_1000BASEKX: 537 case PHY_INTERFACE_MODE_TRGMII: 538 caps |= MAC_1000FD; 539 break; 540 541 case PHY_INTERFACE_MODE_2500BASEX: 542 caps |= MAC_2500FD; 543 break; 544 545 case PHY_INTERFACE_MODE_5GBASER: 546 caps |= MAC_5000FD; 547 break; 548 549 case PHY_INTERFACE_MODE_XGMII: 550 case PHY_INTERFACE_MODE_RXAUI: 551 case PHY_INTERFACE_MODE_XAUI: 552 case PHY_INTERFACE_MODE_10GBASER: 553 case PHY_INTERFACE_MODE_10GKR: 554 caps |= MAC_10000FD; 555 break; 556 557 case PHY_INTERFACE_MODE_25GBASER: 558 caps |= MAC_25000FD; 559 break; 560 561 case PHY_INTERFACE_MODE_XLGMII: 562 caps |= MAC_40000FD; 563 break; 564 565 case PHY_INTERFACE_MODE_INTERNAL: 566 caps |= ~0; 567 break; 568 569 case PHY_INTERFACE_MODE_NA: 570 case PHY_INTERFACE_MODE_MAX: 571 break; 572 } 573 574 switch (rate_matching) { 575 case RATE_MATCH_OPEN_LOOP: 576 /* TODO */ 577 fallthrough; 578 case RATE_MATCH_NONE: 579 matched_caps = 0; 580 break; 581 case RATE_MATCH_PAUSE: { 582 /* The MAC must support asymmetric pause towards the local 583 * device for this. We could allow just symmetric pause, but 584 * then we might have to renegotiate if the link partner 585 * doesn't support pause. This is because there's no way to 586 * accept pause frames without transmitting them if we only 587 * support symmetric pause. 588 */ 589 if (!(mac_capabilities & MAC_SYM_PAUSE) || 590 !(mac_capabilities & MAC_ASYM_PAUSE)) 591 break; 592 593 /* We can't adapt if the MAC doesn't support the interface's 594 * max speed at full duplex. 595 */ 596 if (mac_capabilities & 597 phylink_cap_from_speed_duplex(max_speed, DUPLEX_FULL)) { 598 /* Although a duplex-matching phy might exist, we 599 * conservatively remove these modes because the MAC 600 * will not be aware of the half-duplex nature of the 601 * link. 602 */ 603 matched_caps = GENMASK(__fls(caps), __fls(MAC_10HD)); 604 matched_caps &= ~(MAC_1000HD | MAC_100HD | MAC_10HD); 605 } 606 break; 607 } 608 case RATE_MATCH_CRS: 609 /* The MAC must support half duplex at the interface's max 610 * speed. 611 */ 612 if (mac_capabilities & 613 phylink_cap_from_speed_duplex(max_speed, DUPLEX_HALF)) { 614 matched_caps = GENMASK(__fls(caps), __fls(MAC_10HD)); 615 matched_caps &= mac_capabilities; 616 } 617 break; 618 } 619 620 return (caps & mac_capabilities) | matched_caps; 621 } 622 623 /** 624 * phylink_validate_mask_caps() - Restrict link modes based on caps 625 * @supported: ethtool bitmask for supported link modes. 626 * @state: pointer to a &struct phylink_link_state. 627 * @mac_capabilities: bitmask of MAC capabilities 628 * 629 * Calculate the supported link modes based on @mac_capabilities, and restrict 630 * @supported and @state based on that. Use this function if your capabiliies 631 * aren't constant, such as if they vary depending on the interface. 632 */ 633 static void phylink_validate_mask_caps(unsigned long *supported, 634 struct phylink_link_state *state, 635 unsigned long mac_capabilities) 636 { 637 __ETHTOOL_DECLARE_LINK_MODE_MASK(mask) = { 0, }; 638 unsigned long caps; 639 640 phylink_set_port_modes(mask); 641 phylink_set(mask, Autoneg); 642 caps = phylink_get_capabilities(state->interface, mac_capabilities, 643 state->rate_matching); 644 phylink_caps_to_linkmodes(mask, caps); 645 646 linkmode_and(supported, supported, mask); 647 linkmode_and(state->advertising, state->advertising, mask); 648 } 649 650 static int phylink_validate_mac_and_pcs(struct phylink *pl, 651 unsigned long *supported, 652 struct phylink_link_state *state) 653 { 654 unsigned long capabilities; 655 struct phylink_pcs *pcs; 656 int ret; 657 658 /* Get the PCS for this interface mode */ 659 if (pl->using_mac_select_pcs) { 660 pcs = pl->mac_ops->mac_select_pcs(pl->config, state->interface); 661 if (IS_ERR(pcs)) 662 return PTR_ERR(pcs); 663 } else { 664 pcs = pl->pcs; 665 } 666 667 if (pcs) { 668 /* The PCS, if present, must be setup before phylink_create() 669 * has been called. If the ops is not initialised, print an 670 * error and backtrace rather than oopsing the kernel. 671 */ 672 if (!pcs->ops) { 673 phylink_err(pl, "interface %s: uninitialised PCS\n", 674 phy_modes(state->interface)); 675 dump_stack(); 676 return -EINVAL; 677 } 678 679 /* Validate the link parameters with the PCS */ 680 if (pcs->ops->pcs_validate) { 681 ret = pcs->ops->pcs_validate(pcs, supported, state); 682 if (ret < 0 || phylink_is_empty_linkmode(supported)) 683 return -EINVAL; 684 685 /* Ensure the advertising mask is a subset of the 686 * supported mask. 687 */ 688 linkmode_and(state->advertising, state->advertising, 689 supported); 690 } 691 } 692 693 /* Then validate the link parameters with the MAC */ 694 if (pl->mac_ops->mac_get_caps) 695 capabilities = pl->mac_ops->mac_get_caps(pl->config, 696 state->interface); 697 else 698 capabilities = pl->config->mac_capabilities; 699 700 phylink_validate_mask_caps(supported, state, capabilities); 701 702 return phylink_is_empty_linkmode(supported) ? -EINVAL : 0; 703 } 704 705 static void phylink_validate_one(struct phylink *pl, struct phy_device *phy, 706 const unsigned long *supported, 707 const struct phylink_link_state *state, 708 phy_interface_t interface, 709 unsigned long *accum_supported, 710 unsigned long *accum_advertising) 711 { 712 __ETHTOOL_DECLARE_LINK_MODE_MASK(tmp_supported); 713 struct phylink_link_state tmp_state; 714 715 linkmode_copy(tmp_supported, supported); 716 717 tmp_state = *state; 718 tmp_state.interface = interface; 719 720 if (phy) 721 tmp_state.rate_matching = phy_get_rate_matching(phy, interface); 722 723 if (!phylink_validate_mac_and_pcs(pl, tmp_supported, &tmp_state)) { 724 phylink_dbg(pl, " interface %u (%s) rate match %s supports %*pbl\n", 725 interface, phy_modes(interface), 726 phy_rate_matching_to_str(tmp_state.rate_matching), 727 __ETHTOOL_LINK_MODE_MASK_NBITS, tmp_supported); 728 729 linkmode_or(accum_supported, accum_supported, tmp_supported); 730 linkmode_or(accum_advertising, accum_advertising, 731 tmp_state.advertising); 732 } 733 } 734 735 static int phylink_validate_mask(struct phylink *pl, struct phy_device *phy, 736 unsigned long *supported, 737 struct phylink_link_state *state, 738 const unsigned long *interfaces) 739 { 740 __ETHTOOL_DECLARE_LINK_MODE_MASK(all_adv) = { 0, }; 741 __ETHTOOL_DECLARE_LINK_MODE_MASK(all_s) = { 0, }; 742 int interface; 743 744 for_each_set_bit(interface, interfaces, PHY_INTERFACE_MODE_MAX) 745 phylink_validate_one(pl, phy, supported, state, interface, 746 all_s, all_adv); 747 748 linkmode_copy(supported, all_s); 749 linkmode_copy(state->advertising, all_adv); 750 751 return phylink_is_empty_linkmode(supported) ? -EINVAL : 0; 752 } 753 754 static int phylink_validate(struct phylink *pl, unsigned long *supported, 755 struct phylink_link_state *state) 756 { 757 const unsigned long *interfaces = pl->config->supported_interfaces; 758 759 if (state->interface == PHY_INTERFACE_MODE_NA) 760 return phylink_validate_mask(pl, NULL, supported, state, 761 interfaces); 762 763 if (!test_bit(state->interface, interfaces)) 764 return -EINVAL; 765 766 return phylink_validate_mac_and_pcs(pl, supported, state); 767 } 768 769 static int phylink_parse_fixedlink(struct phylink *pl, 770 const struct fwnode_handle *fwnode) 771 { 772 struct fwnode_handle *fixed_node; 773 bool pause, asym_pause, autoneg; 774 const struct phy_setting *s; 775 struct gpio_desc *desc; 776 u32 speed; 777 int ret; 778 779 fixed_node = fwnode_get_named_child_node(fwnode, "fixed-link"); 780 if (fixed_node) { 781 ret = fwnode_property_read_u32(fixed_node, "speed", &speed); 782 783 pl->link_config.speed = speed; 784 pl->link_config.duplex = DUPLEX_HALF; 785 786 if (fwnode_property_read_bool(fixed_node, "full-duplex")) 787 pl->link_config.duplex = DUPLEX_FULL; 788 789 /* We treat the "pause" and "asym-pause" terminology as 790 * defining the link partner's ability. 791 */ 792 if (fwnode_property_read_bool(fixed_node, "pause")) 793 __set_bit(ETHTOOL_LINK_MODE_Pause_BIT, 794 pl->link_config.lp_advertising); 795 if (fwnode_property_read_bool(fixed_node, "asym-pause")) 796 __set_bit(ETHTOOL_LINK_MODE_Asym_Pause_BIT, 797 pl->link_config.lp_advertising); 798 799 if (ret == 0) { 800 desc = fwnode_gpiod_get_index(fixed_node, "link", 0, 801 GPIOD_IN, "?"); 802 803 if (!IS_ERR(desc)) 804 pl->link_gpio = desc; 805 else if (desc == ERR_PTR(-EPROBE_DEFER)) 806 ret = -EPROBE_DEFER; 807 } 808 fwnode_handle_put(fixed_node); 809 810 if (ret) 811 return ret; 812 } else { 813 u32 prop[5]; 814 815 ret = fwnode_property_read_u32_array(fwnode, "fixed-link", 816 NULL, 0); 817 if (ret != ARRAY_SIZE(prop)) { 818 phylink_err(pl, "broken fixed-link?\n"); 819 return -EINVAL; 820 } 821 822 ret = fwnode_property_read_u32_array(fwnode, "fixed-link", 823 prop, ARRAY_SIZE(prop)); 824 if (!ret) { 825 pl->link_config.duplex = prop[1] ? 826 DUPLEX_FULL : DUPLEX_HALF; 827 pl->link_config.speed = prop[2]; 828 if (prop[3]) 829 __set_bit(ETHTOOL_LINK_MODE_Pause_BIT, 830 pl->link_config.lp_advertising); 831 if (prop[4]) 832 __set_bit(ETHTOOL_LINK_MODE_Asym_Pause_BIT, 833 pl->link_config.lp_advertising); 834 } 835 } 836 837 if (pl->link_config.speed > SPEED_1000 && 838 pl->link_config.duplex != DUPLEX_FULL) 839 phylink_warn(pl, "fixed link specifies half duplex for %dMbps link?\n", 840 pl->link_config.speed); 841 842 linkmode_fill(pl->supported); 843 linkmode_copy(pl->link_config.advertising, pl->supported); 844 phylink_validate(pl, pl->supported, &pl->link_config); 845 846 pause = phylink_test(pl->supported, Pause); 847 asym_pause = phylink_test(pl->supported, Asym_Pause); 848 autoneg = phylink_test(pl->supported, Autoneg); 849 s = phy_lookup_setting(pl->link_config.speed, pl->link_config.duplex, 850 pl->supported, true); 851 linkmode_zero(pl->supported); 852 phylink_set(pl->supported, MII); 853 854 if (pause) 855 phylink_set(pl->supported, Pause); 856 857 if (asym_pause) 858 phylink_set(pl->supported, Asym_Pause); 859 860 if (autoneg) 861 phylink_set(pl->supported, Autoneg); 862 863 if (s) { 864 __set_bit(s->bit, pl->supported); 865 __set_bit(s->bit, pl->link_config.lp_advertising); 866 } else { 867 phylink_warn(pl, "fixed link %s duplex %dMbps not recognised\n", 868 pl->link_config.duplex == DUPLEX_FULL ? "full" : "half", 869 pl->link_config.speed); 870 } 871 872 linkmode_and(pl->link_config.advertising, pl->link_config.advertising, 873 pl->supported); 874 875 pl->link_config.link = 1; 876 pl->link_config.an_complete = 1; 877 878 return 0; 879 } 880 881 static int phylink_parse_mode(struct phylink *pl, 882 const struct fwnode_handle *fwnode) 883 { 884 struct fwnode_handle *dn; 885 const char *managed; 886 unsigned long caps; 887 888 dn = fwnode_get_named_child_node(fwnode, "fixed-link"); 889 if (dn || fwnode_property_present(fwnode, "fixed-link")) 890 pl->cfg_link_an_mode = MLO_AN_FIXED; 891 fwnode_handle_put(dn); 892 893 if ((fwnode_property_read_string(fwnode, "managed", &managed) == 0 && 894 strcmp(managed, "in-band-status") == 0) || 895 pl->config->ovr_an_inband) { 896 if (pl->cfg_link_an_mode == MLO_AN_FIXED) { 897 phylink_err(pl, 898 "can't use both fixed-link and in-band-status\n"); 899 return -EINVAL; 900 } 901 902 linkmode_zero(pl->supported); 903 phylink_set(pl->supported, MII); 904 phylink_set(pl->supported, Autoneg); 905 phylink_set(pl->supported, Asym_Pause); 906 phylink_set(pl->supported, Pause); 907 pl->cfg_link_an_mode = MLO_AN_INBAND; 908 909 switch (pl->link_config.interface) { 910 case PHY_INTERFACE_MODE_SGMII: 911 case PHY_INTERFACE_MODE_PSGMII: 912 case PHY_INTERFACE_MODE_QSGMII: 913 case PHY_INTERFACE_MODE_QUSGMII: 914 case PHY_INTERFACE_MODE_RGMII: 915 case PHY_INTERFACE_MODE_RGMII_ID: 916 case PHY_INTERFACE_MODE_RGMII_RXID: 917 case PHY_INTERFACE_MODE_RGMII_TXID: 918 case PHY_INTERFACE_MODE_RTBI: 919 case PHY_INTERFACE_MODE_1000BASEX: 920 case PHY_INTERFACE_MODE_2500BASEX: 921 case PHY_INTERFACE_MODE_5GBASER: 922 case PHY_INTERFACE_MODE_25GBASER: 923 case PHY_INTERFACE_MODE_USXGMII: 924 case PHY_INTERFACE_MODE_10GKR: 925 case PHY_INTERFACE_MODE_10GBASER: 926 case PHY_INTERFACE_MODE_XLGMII: 927 caps = ~(MAC_SYM_PAUSE | MAC_ASYM_PAUSE); 928 caps = phylink_get_capabilities(pl->link_config.interface, caps, 929 RATE_MATCH_NONE); 930 phylink_caps_to_linkmodes(pl->supported, caps); 931 break; 932 933 default: 934 phylink_err(pl, 935 "incorrect link mode %s for in-band status\n", 936 phy_modes(pl->link_config.interface)); 937 return -EINVAL; 938 } 939 940 linkmode_copy(pl->link_config.advertising, pl->supported); 941 942 if (phylink_validate(pl, pl->supported, &pl->link_config)) { 943 phylink_err(pl, 944 "failed to validate link configuration for in-band status\n"); 945 return -EINVAL; 946 } 947 } 948 949 return 0; 950 } 951 952 static void phylink_apply_manual_flow(struct phylink *pl, 953 struct phylink_link_state *state) 954 { 955 /* If autoneg is disabled, pause AN is also disabled */ 956 if (!linkmode_test_bit(ETHTOOL_LINK_MODE_Autoneg_BIT, 957 state->advertising)) 958 state->pause &= ~MLO_PAUSE_AN; 959 960 /* Manual configuration of pause modes */ 961 if (!(pl->link_config.pause & MLO_PAUSE_AN)) 962 state->pause = pl->link_config.pause; 963 } 964 965 static void phylink_resolve_an_pause(struct phylink_link_state *state) 966 { 967 bool tx_pause, rx_pause; 968 969 if (state->duplex == DUPLEX_FULL) { 970 linkmode_resolve_pause(state->advertising, 971 state->lp_advertising, 972 &tx_pause, &rx_pause); 973 if (tx_pause) 974 state->pause |= MLO_PAUSE_TX; 975 if (rx_pause) 976 state->pause |= MLO_PAUSE_RX; 977 } 978 } 979 980 static void phylink_pcs_pre_config(struct phylink_pcs *pcs, 981 phy_interface_t interface) 982 { 983 if (pcs && pcs->ops->pcs_pre_config) 984 pcs->ops->pcs_pre_config(pcs, interface); 985 } 986 987 static int phylink_pcs_post_config(struct phylink_pcs *pcs, 988 phy_interface_t interface) 989 { 990 int err = 0; 991 992 if (pcs && pcs->ops->pcs_post_config) 993 err = pcs->ops->pcs_post_config(pcs, interface); 994 995 return err; 996 } 997 998 static void phylink_pcs_disable(struct phylink_pcs *pcs) 999 { 1000 if (pcs && pcs->ops->pcs_disable) 1001 pcs->ops->pcs_disable(pcs); 1002 } 1003 1004 static int phylink_pcs_enable(struct phylink_pcs *pcs) 1005 { 1006 int err = 0; 1007 1008 if (pcs && pcs->ops->pcs_enable) 1009 err = pcs->ops->pcs_enable(pcs); 1010 1011 return err; 1012 } 1013 1014 static int phylink_pcs_config(struct phylink_pcs *pcs, unsigned int neg_mode, 1015 const struct phylink_link_state *state, 1016 bool permit_pause_to_mac) 1017 { 1018 if (!pcs) 1019 return 0; 1020 1021 return pcs->ops->pcs_config(pcs, neg_mode, state->interface, 1022 state->advertising, permit_pause_to_mac); 1023 } 1024 1025 static void phylink_pcs_link_up(struct phylink_pcs *pcs, unsigned int neg_mode, 1026 phy_interface_t interface, int speed, 1027 int duplex) 1028 { 1029 if (pcs && pcs->ops->pcs_link_up) 1030 pcs->ops->pcs_link_up(pcs, neg_mode, interface, speed, duplex); 1031 } 1032 1033 static void phylink_pcs_poll_stop(struct phylink *pl) 1034 { 1035 if (pl->cfg_link_an_mode == MLO_AN_INBAND) 1036 del_timer(&pl->link_poll); 1037 } 1038 1039 static void phylink_pcs_poll_start(struct phylink *pl) 1040 { 1041 if (pl->pcs && pl->pcs->poll && pl->cfg_link_an_mode == MLO_AN_INBAND) 1042 mod_timer(&pl->link_poll, jiffies + HZ); 1043 } 1044 1045 static void phylink_mac_config(struct phylink *pl, 1046 const struct phylink_link_state *state) 1047 { 1048 struct phylink_link_state st = *state; 1049 1050 /* Stop drivers incorrectly using these */ 1051 linkmode_zero(st.lp_advertising); 1052 st.speed = SPEED_UNKNOWN; 1053 st.duplex = DUPLEX_UNKNOWN; 1054 st.an_complete = false; 1055 st.link = false; 1056 1057 phylink_dbg(pl, 1058 "%s: mode=%s/%s/%s adv=%*pb pause=%02x\n", 1059 __func__, phylink_an_mode_str(pl->cur_link_an_mode), 1060 phy_modes(st.interface), 1061 phy_rate_matching_to_str(st.rate_matching), 1062 __ETHTOOL_LINK_MODE_MASK_NBITS, st.advertising, 1063 st.pause); 1064 1065 pl->mac_ops->mac_config(pl->config, pl->cur_link_an_mode, &st); 1066 } 1067 1068 static void phylink_pcs_an_restart(struct phylink *pl) 1069 { 1070 if (pl->pcs && linkmode_test_bit(ETHTOOL_LINK_MODE_Autoneg_BIT, 1071 pl->link_config.advertising) && 1072 phy_interface_mode_is_8023z(pl->link_config.interface) && 1073 phylink_autoneg_inband(pl->cur_link_an_mode)) 1074 pl->pcs->ops->pcs_an_restart(pl->pcs); 1075 } 1076 1077 /** 1078 * phylink_pcs_neg_mode() - helper to determine PCS inband mode 1079 * @mode: one of %MLO_AN_FIXED, %MLO_AN_PHY, %MLO_AN_INBAND. 1080 * @interface: interface mode to be used 1081 * @advertising: adertisement ethtool link mode mask 1082 * 1083 * Determines the negotiation mode to be used by the PCS, and returns 1084 * one of: 1085 * 1086 * - %PHYLINK_PCS_NEG_NONE: interface mode does not support inband 1087 * - %PHYLINK_PCS_NEG_OUTBAND: an out of band mode (e.g. reading the PHY) 1088 * will be used. 1089 * - %PHYLINK_PCS_NEG_INBAND_DISABLED: inband mode selected but autoneg 1090 * disabled 1091 * - %PHYLINK_PCS_NEG_INBAND_ENABLED: inband mode selected and autoneg enabled 1092 * 1093 * Note: this is for cases where the PCS itself is involved in negotiation 1094 * (e.g. Clause 37, SGMII and similar) not Clause 73. 1095 */ 1096 static unsigned int phylink_pcs_neg_mode(unsigned int mode, 1097 phy_interface_t interface, 1098 const unsigned long *advertising) 1099 { 1100 unsigned int neg_mode; 1101 1102 switch (interface) { 1103 case PHY_INTERFACE_MODE_SGMII: 1104 case PHY_INTERFACE_MODE_QSGMII: 1105 case PHY_INTERFACE_MODE_QUSGMII: 1106 case PHY_INTERFACE_MODE_USXGMII: 1107 /* These protocols are designed for use with a PHY which 1108 * communicates its negotiation result back to the MAC via 1109 * inband communication. Note: there exist PHYs that run 1110 * with SGMII but do not send the inband data. 1111 */ 1112 if (!phylink_autoneg_inband(mode)) 1113 neg_mode = PHYLINK_PCS_NEG_OUTBAND; 1114 else 1115 neg_mode = PHYLINK_PCS_NEG_INBAND_ENABLED; 1116 break; 1117 1118 case PHY_INTERFACE_MODE_1000BASEX: 1119 case PHY_INTERFACE_MODE_2500BASEX: 1120 /* 1000base-X is designed for use media-side for Fibre 1121 * connections, and thus the Autoneg bit needs to be 1122 * taken into account. We also do this for 2500base-X 1123 * as well, but drivers may not support this, so may 1124 * need to override this. 1125 */ 1126 if (!phylink_autoneg_inband(mode)) 1127 neg_mode = PHYLINK_PCS_NEG_OUTBAND; 1128 else if (linkmode_test_bit(ETHTOOL_LINK_MODE_Autoneg_BIT, 1129 advertising)) 1130 neg_mode = PHYLINK_PCS_NEG_INBAND_ENABLED; 1131 else 1132 neg_mode = PHYLINK_PCS_NEG_INBAND_DISABLED; 1133 break; 1134 1135 default: 1136 neg_mode = PHYLINK_PCS_NEG_NONE; 1137 break; 1138 } 1139 1140 return neg_mode; 1141 } 1142 1143 static void phylink_major_config(struct phylink *pl, bool restart, 1144 const struct phylink_link_state *state) 1145 { 1146 struct phylink_pcs *pcs = NULL; 1147 bool pcs_changed = false; 1148 unsigned int rate_kbd; 1149 unsigned int neg_mode; 1150 int err; 1151 1152 phylink_dbg(pl, "major config %s\n", phy_modes(state->interface)); 1153 1154 pl->pcs_neg_mode = phylink_pcs_neg_mode(pl->cur_link_an_mode, 1155 state->interface, 1156 state->advertising); 1157 1158 if (pl->using_mac_select_pcs) { 1159 pcs = pl->mac_ops->mac_select_pcs(pl->config, state->interface); 1160 if (IS_ERR(pcs)) { 1161 phylink_err(pl, 1162 "mac_select_pcs unexpectedly failed: %pe\n", 1163 pcs); 1164 return; 1165 } 1166 1167 pcs_changed = pcs && pl->pcs != pcs; 1168 } 1169 1170 phylink_pcs_poll_stop(pl); 1171 1172 if (pl->mac_ops->mac_prepare) { 1173 err = pl->mac_ops->mac_prepare(pl->config, pl->cur_link_an_mode, 1174 state->interface); 1175 if (err < 0) { 1176 phylink_err(pl, "mac_prepare failed: %pe\n", 1177 ERR_PTR(err)); 1178 return; 1179 } 1180 } 1181 1182 /* If we have a new PCS, switch to the new PCS after preparing the MAC 1183 * for the change. 1184 */ 1185 if (pcs_changed) { 1186 phylink_pcs_disable(pl->pcs); 1187 1188 if (pl->pcs) 1189 pl->pcs->phylink = NULL; 1190 1191 pcs->phylink = pl; 1192 1193 pl->pcs = pcs; 1194 } 1195 1196 if (pl->pcs) 1197 phylink_pcs_pre_config(pl->pcs, state->interface); 1198 1199 phylink_mac_config(pl, state); 1200 1201 if (pl->pcs) 1202 phylink_pcs_post_config(pl->pcs, state->interface); 1203 1204 if (pl->pcs_state == PCS_STATE_STARTING || pcs_changed) 1205 phylink_pcs_enable(pl->pcs); 1206 1207 neg_mode = pl->cur_link_an_mode; 1208 if (pl->pcs && pl->pcs->neg_mode) 1209 neg_mode = pl->pcs_neg_mode; 1210 1211 err = phylink_pcs_config(pl->pcs, neg_mode, state, 1212 !!(pl->link_config.pause & MLO_PAUSE_AN)); 1213 if (err < 0) 1214 phylink_err(pl, "pcs_config failed: %pe\n", 1215 ERR_PTR(err)); 1216 else if (err > 0) 1217 restart = true; 1218 1219 if (restart) 1220 phylink_pcs_an_restart(pl); 1221 1222 if (pl->mac_ops->mac_finish) { 1223 err = pl->mac_ops->mac_finish(pl->config, pl->cur_link_an_mode, 1224 state->interface); 1225 if (err < 0) 1226 phylink_err(pl, "mac_finish failed: %pe\n", 1227 ERR_PTR(err)); 1228 } 1229 1230 if (pl->sfp_bus) { 1231 rate_kbd = phylink_interface_signal_rate(state->interface); 1232 if (rate_kbd) 1233 sfp_upstream_set_signal_rate(pl->sfp_bus, rate_kbd); 1234 } 1235 1236 phylink_pcs_poll_start(pl); 1237 } 1238 1239 /* 1240 * Reconfigure for a change of inband advertisement. 1241 * If we have a separate PCS, we only need to call its pcs_config() method, 1242 * and then restart AN if it indicates something changed. Otherwise, we do 1243 * the full MAC reconfiguration. 1244 */ 1245 static int phylink_change_inband_advert(struct phylink *pl) 1246 { 1247 unsigned int neg_mode; 1248 int ret; 1249 1250 if (test_bit(PHYLINK_DISABLE_STOPPED, &pl->phylink_disable_state)) 1251 return 0; 1252 1253 phylink_dbg(pl, "%s: mode=%s/%s adv=%*pb pause=%02x\n", __func__, 1254 phylink_an_mode_str(pl->cur_link_an_mode), 1255 phy_modes(pl->link_config.interface), 1256 __ETHTOOL_LINK_MODE_MASK_NBITS, pl->link_config.advertising, 1257 pl->link_config.pause); 1258 1259 /* Recompute the PCS neg mode */ 1260 pl->pcs_neg_mode = phylink_pcs_neg_mode(pl->cur_link_an_mode, 1261 pl->link_config.interface, 1262 pl->link_config.advertising); 1263 1264 neg_mode = pl->cur_link_an_mode; 1265 if (pl->pcs->neg_mode) 1266 neg_mode = pl->pcs_neg_mode; 1267 1268 /* Modern PCS-based method; update the advert at the PCS, and 1269 * restart negotiation if the pcs_config() helper indicates that 1270 * the programmed advertisement has changed. 1271 */ 1272 ret = phylink_pcs_config(pl->pcs, neg_mode, &pl->link_config, 1273 !!(pl->link_config.pause & MLO_PAUSE_AN)); 1274 if (ret < 0) 1275 return ret; 1276 1277 if (ret > 0) 1278 phylink_pcs_an_restart(pl); 1279 1280 return 0; 1281 } 1282 1283 static void phylink_mac_pcs_get_state(struct phylink *pl, 1284 struct phylink_link_state *state) 1285 { 1286 linkmode_copy(state->advertising, pl->link_config.advertising); 1287 linkmode_zero(state->lp_advertising); 1288 state->interface = pl->link_config.interface; 1289 state->rate_matching = pl->link_config.rate_matching; 1290 if (linkmode_test_bit(ETHTOOL_LINK_MODE_Autoneg_BIT, 1291 state->advertising)) { 1292 state->speed = SPEED_UNKNOWN; 1293 state->duplex = DUPLEX_UNKNOWN; 1294 state->pause = MLO_PAUSE_NONE; 1295 } else { 1296 state->speed = pl->link_config.speed; 1297 state->duplex = pl->link_config.duplex; 1298 state->pause = pl->link_config.pause; 1299 } 1300 state->an_complete = 0; 1301 state->link = 1; 1302 1303 if (pl->pcs) 1304 pl->pcs->ops->pcs_get_state(pl->pcs, state); 1305 else 1306 state->link = 0; 1307 } 1308 1309 /* The fixed state is... fixed except for the link state, 1310 * which may be determined by a GPIO or a callback. 1311 */ 1312 static void phylink_get_fixed_state(struct phylink *pl, 1313 struct phylink_link_state *state) 1314 { 1315 *state = pl->link_config; 1316 if (pl->config->get_fixed_state) 1317 pl->config->get_fixed_state(pl->config, state); 1318 else if (pl->link_gpio) 1319 state->link = !!gpiod_get_value_cansleep(pl->link_gpio); 1320 1321 state->pause = MLO_PAUSE_NONE; 1322 phylink_resolve_an_pause(state); 1323 } 1324 1325 static void phylink_mac_initial_config(struct phylink *pl, bool force_restart) 1326 { 1327 struct phylink_link_state link_state; 1328 1329 switch (pl->cur_link_an_mode) { 1330 case MLO_AN_PHY: 1331 link_state = pl->phy_state; 1332 break; 1333 1334 case MLO_AN_FIXED: 1335 phylink_get_fixed_state(pl, &link_state); 1336 break; 1337 1338 case MLO_AN_INBAND: 1339 link_state = pl->link_config; 1340 if (link_state.interface == PHY_INTERFACE_MODE_SGMII) 1341 link_state.pause = MLO_PAUSE_NONE; 1342 break; 1343 1344 default: /* can't happen */ 1345 return; 1346 } 1347 1348 link_state.link = false; 1349 1350 phylink_apply_manual_flow(pl, &link_state); 1351 phylink_major_config(pl, force_restart, &link_state); 1352 } 1353 1354 static const char *phylink_pause_to_str(int pause) 1355 { 1356 switch (pause & MLO_PAUSE_TXRX_MASK) { 1357 case MLO_PAUSE_TX | MLO_PAUSE_RX: 1358 return "rx/tx"; 1359 case MLO_PAUSE_TX: 1360 return "tx"; 1361 case MLO_PAUSE_RX: 1362 return "rx"; 1363 default: 1364 return "off"; 1365 } 1366 } 1367 1368 static void phylink_link_up(struct phylink *pl, 1369 struct phylink_link_state link_state) 1370 { 1371 struct net_device *ndev = pl->netdev; 1372 unsigned int neg_mode; 1373 int speed, duplex; 1374 bool rx_pause; 1375 1376 speed = link_state.speed; 1377 duplex = link_state.duplex; 1378 rx_pause = !!(link_state.pause & MLO_PAUSE_RX); 1379 1380 switch (link_state.rate_matching) { 1381 case RATE_MATCH_PAUSE: 1382 /* The PHY is doing rate matchion from the media rate (in 1383 * the link_state) to the interface speed, and will send 1384 * pause frames to the MAC to limit its transmission speed. 1385 */ 1386 speed = phylink_interface_max_speed(link_state.interface); 1387 duplex = DUPLEX_FULL; 1388 rx_pause = true; 1389 break; 1390 1391 case RATE_MATCH_CRS: 1392 /* The PHY is doing rate matchion from the media rate (in 1393 * the link_state) to the interface speed, and will cause 1394 * collisions to the MAC to limit its transmission speed. 1395 */ 1396 speed = phylink_interface_max_speed(link_state.interface); 1397 duplex = DUPLEX_HALF; 1398 break; 1399 } 1400 1401 pl->cur_interface = link_state.interface; 1402 1403 neg_mode = pl->cur_link_an_mode; 1404 if (pl->pcs && pl->pcs->neg_mode) 1405 neg_mode = pl->pcs_neg_mode; 1406 1407 phylink_pcs_link_up(pl->pcs, neg_mode, pl->cur_interface, speed, 1408 duplex); 1409 1410 pl->mac_ops->mac_link_up(pl->config, pl->phydev, pl->cur_link_an_mode, 1411 pl->cur_interface, speed, duplex, 1412 !!(link_state.pause & MLO_PAUSE_TX), rx_pause); 1413 1414 if (ndev) 1415 netif_carrier_on(ndev); 1416 1417 phylink_info(pl, 1418 "Link is Up - %s/%s - flow control %s\n", 1419 phy_speed_to_str(link_state.speed), 1420 phy_duplex_to_str(link_state.duplex), 1421 phylink_pause_to_str(link_state.pause)); 1422 } 1423 1424 static void phylink_link_down(struct phylink *pl) 1425 { 1426 struct net_device *ndev = pl->netdev; 1427 1428 if (ndev) 1429 netif_carrier_off(ndev); 1430 pl->mac_ops->mac_link_down(pl->config, pl->cur_link_an_mode, 1431 pl->cur_interface); 1432 phylink_info(pl, "Link is Down\n"); 1433 } 1434 1435 static void phylink_resolve(struct work_struct *w) 1436 { 1437 struct phylink *pl = container_of(w, struct phylink, resolve); 1438 struct phylink_link_state link_state; 1439 struct net_device *ndev = pl->netdev; 1440 bool mac_config = false; 1441 bool retrigger = false; 1442 bool cur_link_state; 1443 1444 mutex_lock(&pl->state_mutex); 1445 if (pl->netdev) 1446 cur_link_state = netif_carrier_ok(ndev); 1447 else 1448 cur_link_state = pl->old_link_state; 1449 1450 if (pl->phylink_disable_state) { 1451 pl->mac_link_dropped = false; 1452 link_state.link = false; 1453 } else if (pl->mac_link_dropped) { 1454 link_state.link = false; 1455 retrigger = true; 1456 } else { 1457 switch (pl->cur_link_an_mode) { 1458 case MLO_AN_PHY: 1459 link_state = pl->phy_state; 1460 phylink_apply_manual_flow(pl, &link_state); 1461 mac_config = link_state.link; 1462 break; 1463 1464 case MLO_AN_FIXED: 1465 phylink_get_fixed_state(pl, &link_state); 1466 mac_config = link_state.link; 1467 break; 1468 1469 case MLO_AN_INBAND: 1470 phylink_mac_pcs_get_state(pl, &link_state); 1471 1472 /* The PCS may have a latching link-fail indicator. 1473 * If the link was up, bring the link down and 1474 * re-trigger the resolve. Otherwise, re-read the 1475 * PCS state to get the current status of the link. 1476 */ 1477 if (!link_state.link) { 1478 if (cur_link_state) 1479 retrigger = true; 1480 else 1481 phylink_mac_pcs_get_state(pl, 1482 &link_state); 1483 } 1484 1485 /* If we have a phy, the "up" state is the union of 1486 * both the PHY and the MAC 1487 */ 1488 if (pl->phydev) 1489 link_state.link &= pl->phy_state.link; 1490 1491 /* Only update if the PHY link is up */ 1492 if (pl->phydev && pl->phy_state.link) { 1493 /* If the interface has changed, force a 1494 * link down event if the link isn't already 1495 * down, and re-resolve. 1496 */ 1497 if (link_state.interface != 1498 pl->phy_state.interface) { 1499 retrigger = true; 1500 link_state.link = false; 1501 } 1502 link_state.interface = pl->phy_state.interface; 1503 1504 /* If we are doing rate matching, then the 1505 * link speed/duplex comes from the PHY 1506 */ 1507 if (pl->phy_state.rate_matching) { 1508 link_state.rate_matching = 1509 pl->phy_state.rate_matching; 1510 link_state.speed = pl->phy_state.speed; 1511 link_state.duplex = 1512 pl->phy_state.duplex; 1513 } 1514 1515 /* If we have a PHY, we need to update with 1516 * the PHY flow control bits. 1517 */ 1518 link_state.pause = pl->phy_state.pause; 1519 mac_config = true; 1520 } 1521 phylink_apply_manual_flow(pl, &link_state); 1522 break; 1523 } 1524 } 1525 1526 if (mac_config) { 1527 if (link_state.interface != pl->link_config.interface) { 1528 /* The interface has changed, force the link down and 1529 * then reconfigure. 1530 */ 1531 if (cur_link_state) { 1532 phylink_link_down(pl); 1533 cur_link_state = false; 1534 } 1535 phylink_major_config(pl, false, &link_state); 1536 pl->link_config.interface = link_state.interface; 1537 } 1538 } 1539 1540 if (link_state.link != cur_link_state) { 1541 pl->old_link_state = link_state.link; 1542 if (!link_state.link) 1543 phylink_link_down(pl); 1544 else 1545 phylink_link_up(pl, link_state); 1546 } 1547 if (!link_state.link && retrigger) { 1548 pl->mac_link_dropped = false; 1549 queue_work(system_power_efficient_wq, &pl->resolve); 1550 } 1551 mutex_unlock(&pl->state_mutex); 1552 } 1553 1554 static void phylink_run_resolve(struct phylink *pl) 1555 { 1556 if (!pl->phylink_disable_state) 1557 queue_work(system_power_efficient_wq, &pl->resolve); 1558 } 1559 1560 static void phylink_run_resolve_and_disable(struct phylink *pl, int bit) 1561 { 1562 unsigned long state = pl->phylink_disable_state; 1563 1564 set_bit(bit, &pl->phylink_disable_state); 1565 if (state == 0) { 1566 queue_work(system_power_efficient_wq, &pl->resolve); 1567 flush_work(&pl->resolve); 1568 } 1569 } 1570 1571 static void phylink_enable_and_run_resolve(struct phylink *pl, int bit) 1572 { 1573 clear_bit(bit, &pl->phylink_disable_state); 1574 phylink_run_resolve(pl); 1575 } 1576 1577 static void phylink_fixed_poll(struct timer_list *t) 1578 { 1579 struct phylink *pl = container_of(t, struct phylink, link_poll); 1580 1581 mod_timer(t, jiffies + HZ); 1582 1583 phylink_run_resolve(pl); 1584 } 1585 1586 static const struct sfp_upstream_ops sfp_phylink_ops; 1587 1588 static int phylink_register_sfp(struct phylink *pl, 1589 const struct fwnode_handle *fwnode) 1590 { 1591 struct sfp_bus *bus; 1592 int ret; 1593 1594 if (!fwnode) 1595 return 0; 1596 1597 bus = sfp_bus_find_fwnode(fwnode); 1598 if (IS_ERR(bus)) { 1599 phylink_err(pl, "unable to attach SFP bus: %pe\n", bus); 1600 return PTR_ERR(bus); 1601 } 1602 1603 pl->sfp_bus = bus; 1604 1605 ret = sfp_bus_add_upstream(bus, pl, &sfp_phylink_ops); 1606 sfp_bus_put(bus); 1607 1608 return ret; 1609 } 1610 1611 /** 1612 * phylink_create() - create a phylink instance 1613 * @config: a pointer to the target &struct phylink_config 1614 * @fwnode: a pointer to a &struct fwnode_handle describing the network 1615 * interface 1616 * @iface: the desired link mode defined by &typedef phy_interface_t 1617 * @mac_ops: a pointer to a &struct phylink_mac_ops for the MAC. 1618 * 1619 * Create a new phylink instance, and parse the link parameters found in @np. 1620 * This will parse in-band modes, fixed-link or SFP configuration. 1621 * 1622 * Note: the rtnl lock must not be held when calling this function. 1623 * 1624 * Returns a pointer to a &struct phylink, or an error-pointer value. Users 1625 * must use IS_ERR() to check for errors from this function. 1626 */ 1627 struct phylink *phylink_create(struct phylink_config *config, 1628 const struct fwnode_handle *fwnode, 1629 phy_interface_t iface, 1630 const struct phylink_mac_ops *mac_ops) 1631 { 1632 bool using_mac_select_pcs = false; 1633 struct phylink *pl; 1634 int ret; 1635 1636 /* Validate the supplied configuration */ 1637 if (phy_interface_empty(config->supported_interfaces)) { 1638 dev_err(config->dev, 1639 "phylink: error: empty supported_interfaces\n"); 1640 return ERR_PTR(-EINVAL); 1641 } 1642 1643 if (mac_ops->mac_select_pcs && 1644 mac_ops->mac_select_pcs(config, PHY_INTERFACE_MODE_NA) != 1645 ERR_PTR(-EOPNOTSUPP)) 1646 using_mac_select_pcs = true; 1647 1648 pl = kzalloc(sizeof(*pl), GFP_KERNEL); 1649 if (!pl) 1650 return ERR_PTR(-ENOMEM); 1651 1652 mutex_init(&pl->state_mutex); 1653 INIT_WORK(&pl->resolve, phylink_resolve); 1654 1655 pl->config = config; 1656 if (config->type == PHYLINK_NETDEV) { 1657 pl->netdev = to_net_dev(config->dev); 1658 netif_carrier_off(pl->netdev); 1659 } else if (config->type == PHYLINK_DEV) { 1660 pl->dev = config->dev; 1661 } else { 1662 kfree(pl); 1663 return ERR_PTR(-EINVAL); 1664 } 1665 1666 pl->using_mac_select_pcs = using_mac_select_pcs; 1667 pl->phy_state.interface = iface; 1668 pl->link_interface = iface; 1669 if (iface == PHY_INTERFACE_MODE_MOCA) 1670 pl->link_port = PORT_BNC; 1671 else 1672 pl->link_port = PORT_MII; 1673 pl->link_config.interface = iface; 1674 pl->link_config.pause = MLO_PAUSE_AN; 1675 pl->link_config.speed = SPEED_UNKNOWN; 1676 pl->link_config.duplex = DUPLEX_UNKNOWN; 1677 pl->pcs_state = PCS_STATE_DOWN; 1678 pl->mac_ops = mac_ops; 1679 __set_bit(PHYLINK_DISABLE_STOPPED, &pl->phylink_disable_state); 1680 timer_setup(&pl->link_poll, phylink_fixed_poll, 0); 1681 1682 linkmode_fill(pl->supported); 1683 linkmode_copy(pl->link_config.advertising, pl->supported); 1684 phylink_validate(pl, pl->supported, &pl->link_config); 1685 1686 ret = phylink_parse_mode(pl, fwnode); 1687 if (ret < 0) { 1688 kfree(pl); 1689 return ERR_PTR(ret); 1690 } 1691 1692 if (pl->cfg_link_an_mode == MLO_AN_FIXED) { 1693 ret = phylink_parse_fixedlink(pl, fwnode); 1694 if (ret < 0) { 1695 kfree(pl); 1696 return ERR_PTR(ret); 1697 } 1698 } 1699 1700 pl->cur_link_an_mode = pl->cfg_link_an_mode; 1701 1702 ret = phylink_register_sfp(pl, fwnode); 1703 if (ret < 0) { 1704 kfree(pl); 1705 return ERR_PTR(ret); 1706 } 1707 1708 return pl; 1709 } 1710 EXPORT_SYMBOL_GPL(phylink_create); 1711 1712 /** 1713 * phylink_destroy() - cleanup and destroy the phylink instance 1714 * @pl: a pointer to a &struct phylink returned from phylink_create() 1715 * 1716 * Destroy a phylink instance. Any PHY that has been attached must have been 1717 * cleaned up via phylink_disconnect_phy() prior to calling this function. 1718 * 1719 * Note: the rtnl lock must not be held when calling this function. 1720 */ 1721 void phylink_destroy(struct phylink *pl) 1722 { 1723 sfp_bus_del_upstream(pl->sfp_bus); 1724 if (pl->link_gpio) 1725 gpiod_put(pl->link_gpio); 1726 1727 cancel_work_sync(&pl->resolve); 1728 kfree(pl); 1729 } 1730 EXPORT_SYMBOL_GPL(phylink_destroy); 1731 1732 /** 1733 * phylink_expects_phy() - Determine if phylink expects a phy to be attached 1734 * @pl: a pointer to a &struct phylink returned from phylink_create() 1735 * 1736 * When using fixed-link mode, or in-band mode with 1000base-X or 2500base-X, 1737 * no PHY is needed. 1738 * 1739 * Returns true if phylink will be expecting a PHY. 1740 */ 1741 bool phylink_expects_phy(struct phylink *pl) 1742 { 1743 if (pl->cfg_link_an_mode == MLO_AN_FIXED || 1744 (pl->cfg_link_an_mode == MLO_AN_INBAND && 1745 phy_interface_mode_is_8023z(pl->link_config.interface))) 1746 return false; 1747 return true; 1748 } 1749 EXPORT_SYMBOL_GPL(phylink_expects_phy); 1750 1751 static void phylink_phy_change(struct phy_device *phydev, bool up) 1752 { 1753 struct phylink *pl = phydev->phylink; 1754 bool tx_pause, rx_pause; 1755 1756 phy_get_pause(phydev, &tx_pause, &rx_pause); 1757 1758 mutex_lock(&pl->state_mutex); 1759 pl->phy_state.speed = phydev->speed; 1760 pl->phy_state.duplex = phydev->duplex; 1761 pl->phy_state.rate_matching = phydev->rate_matching; 1762 pl->phy_state.pause = MLO_PAUSE_NONE; 1763 if (tx_pause) 1764 pl->phy_state.pause |= MLO_PAUSE_TX; 1765 if (rx_pause) 1766 pl->phy_state.pause |= MLO_PAUSE_RX; 1767 pl->phy_state.interface = phydev->interface; 1768 pl->phy_state.link = up; 1769 mutex_unlock(&pl->state_mutex); 1770 1771 phylink_run_resolve(pl); 1772 1773 phylink_dbg(pl, "phy link %s %s/%s/%s/%s/%s\n", up ? "up" : "down", 1774 phy_modes(phydev->interface), 1775 phy_speed_to_str(phydev->speed), 1776 phy_duplex_to_str(phydev->duplex), 1777 phy_rate_matching_to_str(phydev->rate_matching), 1778 phylink_pause_to_str(pl->phy_state.pause)); 1779 } 1780 1781 static int phylink_validate_phy(struct phylink *pl, struct phy_device *phy, 1782 unsigned long *supported, 1783 struct phylink_link_state *state) 1784 { 1785 DECLARE_PHY_INTERFACE_MASK(interfaces); 1786 1787 /* If the PHY provides a bitmap of the interfaces it will be using 1788 * depending on the negotiated media speeds, use this to validate 1789 * which ethtool link modes can be used. 1790 */ 1791 if (!phy_interface_empty(phy->possible_interfaces)) { 1792 /* We only care about the union of the PHY's interfaces and 1793 * those which the host supports. 1794 */ 1795 phy_interface_and(interfaces, phy->possible_interfaces, 1796 pl->config->supported_interfaces); 1797 1798 if (phy_interface_empty(interfaces)) { 1799 phylink_err(pl, "PHY has no common interfaces\n"); 1800 return -EINVAL; 1801 } 1802 1803 if (phy_on_sfp(phy)) { 1804 /* If the PHY is on a SFP, limit the interfaces to 1805 * those that can be used with a SFP module. 1806 */ 1807 phy_interface_and(interfaces, interfaces, 1808 phylink_sfp_interfaces); 1809 1810 if (phy_interface_empty(interfaces)) { 1811 phylink_err(pl, "SFP PHY's possible interfaces becomes empty\n"); 1812 return -EINVAL; 1813 } 1814 } 1815 1816 phylink_dbg(pl, "PHY %s uses interfaces %*pbl, validating %*pbl\n", 1817 phydev_name(phy), 1818 (int)PHY_INTERFACE_MODE_MAX, 1819 phy->possible_interfaces, 1820 (int)PHY_INTERFACE_MODE_MAX, interfaces); 1821 1822 return phylink_validate_mask(pl, phy, supported, state, 1823 interfaces); 1824 } 1825 1826 /* Check whether we would use rate matching for the proposed interface 1827 * mode. 1828 */ 1829 state->rate_matching = phy_get_rate_matching(phy, state->interface); 1830 1831 /* Clause 45 PHYs may switch their Serdes lane between, e.g. 10GBASE-R, 1832 * 5GBASE-R, 2500BASE-X and SGMII if they are not using rate matching. 1833 * For some interface modes (e.g. RXAUI, XAUI and USXGMII) switching 1834 * their Serdes is either unnecessary or not reasonable. 1835 * 1836 * For these which switch interface modes, we really need to know which 1837 * interface modes the PHY supports to properly work out which ethtool 1838 * linkmodes can be supported. For now, as a work-around, we validate 1839 * against all interface modes, which may lead to more ethtool link 1840 * modes being advertised than are actually supported. 1841 */ 1842 if (phy->is_c45 && state->rate_matching == RATE_MATCH_NONE && 1843 state->interface != PHY_INTERFACE_MODE_RXAUI && 1844 state->interface != PHY_INTERFACE_MODE_XAUI && 1845 state->interface != PHY_INTERFACE_MODE_USXGMII) 1846 state->interface = PHY_INTERFACE_MODE_NA; 1847 1848 return phylink_validate(pl, supported, state); 1849 } 1850 1851 static int phylink_bringup_phy(struct phylink *pl, struct phy_device *phy, 1852 phy_interface_t interface) 1853 { 1854 struct phylink_link_state config; 1855 __ETHTOOL_DECLARE_LINK_MODE_MASK(supported); 1856 char *irq_str; 1857 int ret; 1858 1859 /* 1860 * This is the new way of dealing with flow control for PHYs, 1861 * as described by Timur Tabi in commit 529ed1275263 ("net: phy: 1862 * phy drivers should not set SUPPORTED_[Asym_]Pause") except 1863 * using our validate call to the MAC, we rely upon the MAC 1864 * clearing the bits from both supported and advertising fields. 1865 */ 1866 phy_support_asym_pause(phy); 1867 1868 memset(&config, 0, sizeof(config)); 1869 linkmode_copy(supported, phy->supported); 1870 linkmode_copy(config.advertising, phy->advertising); 1871 config.interface = interface; 1872 1873 ret = phylink_validate_phy(pl, phy, supported, &config); 1874 if (ret) { 1875 phylink_warn(pl, "validation of %s with support %*pb and advertisement %*pb failed: %pe\n", 1876 phy_modes(config.interface), 1877 __ETHTOOL_LINK_MODE_MASK_NBITS, phy->supported, 1878 __ETHTOOL_LINK_MODE_MASK_NBITS, config.advertising, 1879 ERR_PTR(ret)); 1880 return ret; 1881 } 1882 1883 phy->phylink = pl; 1884 phy->phy_link_change = phylink_phy_change; 1885 1886 irq_str = phy_attached_info_irq(phy); 1887 phylink_info(pl, 1888 "PHY [%s] driver [%s] (irq=%s)\n", 1889 dev_name(&phy->mdio.dev), phy->drv->name, irq_str); 1890 kfree(irq_str); 1891 1892 mutex_lock(&phy->lock); 1893 mutex_lock(&pl->state_mutex); 1894 pl->phydev = phy; 1895 pl->phy_state.interface = interface; 1896 pl->phy_state.pause = MLO_PAUSE_NONE; 1897 pl->phy_state.speed = SPEED_UNKNOWN; 1898 pl->phy_state.duplex = DUPLEX_UNKNOWN; 1899 pl->phy_state.rate_matching = RATE_MATCH_NONE; 1900 linkmode_copy(pl->supported, supported); 1901 linkmode_copy(pl->link_config.advertising, config.advertising); 1902 1903 /* Restrict the phy advertisement according to the MAC support. */ 1904 linkmode_copy(phy->advertising, config.advertising); 1905 mutex_unlock(&pl->state_mutex); 1906 mutex_unlock(&phy->lock); 1907 1908 phylink_dbg(pl, 1909 "phy: %s setting supported %*pb advertising %*pb\n", 1910 phy_modes(interface), 1911 __ETHTOOL_LINK_MODE_MASK_NBITS, pl->supported, 1912 __ETHTOOL_LINK_MODE_MASK_NBITS, phy->advertising); 1913 1914 if (phy_interrupt_is_valid(phy)) 1915 phy_request_interrupt(phy); 1916 1917 if (pl->config->mac_managed_pm) 1918 phy->mac_managed_pm = true; 1919 1920 return 0; 1921 } 1922 1923 static int phylink_attach_phy(struct phylink *pl, struct phy_device *phy, 1924 phy_interface_t interface) 1925 { 1926 if (WARN_ON(pl->cfg_link_an_mode == MLO_AN_FIXED || 1927 (pl->cfg_link_an_mode == MLO_AN_INBAND && 1928 phy_interface_mode_is_8023z(interface) && !pl->sfp_bus))) 1929 return -EINVAL; 1930 1931 if (pl->phydev) 1932 return -EBUSY; 1933 1934 return phy_attach_direct(pl->netdev, phy, 0, interface); 1935 } 1936 1937 /** 1938 * phylink_connect_phy() - connect a PHY to the phylink instance 1939 * @pl: a pointer to a &struct phylink returned from phylink_create() 1940 * @phy: a pointer to a &struct phy_device. 1941 * 1942 * Connect @phy to the phylink instance specified by @pl by calling 1943 * phy_attach_direct(). Configure the @phy according to the MAC driver's 1944 * capabilities, start the PHYLIB state machine and enable any interrupts 1945 * that the PHY supports. 1946 * 1947 * This updates the phylink's ethtool supported and advertising link mode 1948 * masks. 1949 * 1950 * Returns 0 on success or a negative errno. 1951 */ 1952 int phylink_connect_phy(struct phylink *pl, struct phy_device *phy) 1953 { 1954 int ret; 1955 1956 /* Use PHY device/driver interface */ 1957 if (pl->link_interface == PHY_INTERFACE_MODE_NA) { 1958 pl->link_interface = phy->interface; 1959 pl->link_config.interface = pl->link_interface; 1960 } 1961 1962 ret = phylink_attach_phy(pl, phy, pl->link_interface); 1963 if (ret < 0) 1964 return ret; 1965 1966 ret = phylink_bringup_phy(pl, phy, pl->link_config.interface); 1967 if (ret) 1968 phy_detach(phy); 1969 1970 return ret; 1971 } 1972 EXPORT_SYMBOL_GPL(phylink_connect_phy); 1973 1974 /** 1975 * phylink_of_phy_connect() - connect the PHY specified in the DT mode. 1976 * @pl: a pointer to a &struct phylink returned from phylink_create() 1977 * @dn: a pointer to a &struct device_node. 1978 * @flags: PHY-specific flags to communicate to the PHY device driver 1979 * 1980 * Connect the phy specified in the device node @dn to the phylink instance 1981 * specified by @pl. Actions specified in phylink_connect_phy() will be 1982 * performed. 1983 * 1984 * Returns 0 on success or a negative errno. 1985 */ 1986 int phylink_of_phy_connect(struct phylink *pl, struct device_node *dn, 1987 u32 flags) 1988 { 1989 return phylink_fwnode_phy_connect(pl, of_fwnode_handle(dn), flags); 1990 } 1991 EXPORT_SYMBOL_GPL(phylink_of_phy_connect); 1992 1993 /** 1994 * phylink_fwnode_phy_connect() - connect the PHY specified in the fwnode. 1995 * @pl: a pointer to a &struct phylink returned from phylink_create() 1996 * @fwnode: a pointer to a &struct fwnode_handle. 1997 * @flags: PHY-specific flags to communicate to the PHY device driver 1998 * 1999 * Connect the phy specified @fwnode to the phylink instance specified 2000 * by @pl. 2001 * 2002 * Returns 0 on success or a negative errno. 2003 */ 2004 int phylink_fwnode_phy_connect(struct phylink *pl, 2005 const struct fwnode_handle *fwnode, 2006 u32 flags) 2007 { 2008 struct fwnode_handle *phy_fwnode; 2009 struct phy_device *phy_dev; 2010 int ret; 2011 2012 /* Fixed links and 802.3z are handled without needing a PHY */ 2013 if (pl->cfg_link_an_mode == MLO_AN_FIXED || 2014 (pl->cfg_link_an_mode == MLO_AN_INBAND && 2015 phy_interface_mode_is_8023z(pl->link_interface))) 2016 return 0; 2017 2018 phy_fwnode = fwnode_get_phy_node(fwnode); 2019 if (IS_ERR(phy_fwnode)) { 2020 if (pl->cfg_link_an_mode == MLO_AN_PHY) 2021 return -ENODEV; 2022 return 0; 2023 } 2024 2025 phy_dev = fwnode_phy_find_device(phy_fwnode); 2026 /* We're done with the phy_node handle */ 2027 fwnode_handle_put(phy_fwnode); 2028 if (!phy_dev) 2029 return -ENODEV; 2030 2031 /* Use PHY device/driver interface */ 2032 if (pl->link_interface == PHY_INTERFACE_MODE_NA) { 2033 pl->link_interface = phy_dev->interface; 2034 pl->link_config.interface = pl->link_interface; 2035 } 2036 2037 ret = phy_attach_direct(pl->netdev, phy_dev, flags, 2038 pl->link_interface); 2039 phy_device_free(phy_dev); 2040 if (ret) 2041 return ret; 2042 2043 ret = phylink_bringup_phy(pl, phy_dev, pl->link_config.interface); 2044 if (ret) 2045 phy_detach(phy_dev); 2046 2047 return ret; 2048 } 2049 EXPORT_SYMBOL_GPL(phylink_fwnode_phy_connect); 2050 2051 /** 2052 * phylink_disconnect_phy() - disconnect any PHY attached to the phylink 2053 * instance. 2054 * @pl: a pointer to a &struct phylink returned from phylink_create() 2055 * 2056 * Disconnect any current PHY from the phylink instance described by @pl. 2057 */ 2058 void phylink_disconnect_phy(struct phylink *pl) 2059 { 2060 struct phy_device *phy; 2061 2062 ASSERT_RTNL(); 2063 2064 phy = pl->phydev; 2065 if (phy) { 2066 mutex_lock(&phy->lock); 2067 mutex_lock(&pl->state_mutex); 2068 pl->phydev = NULL; 2069 mutex_unlock(&pl->state_mutex); 2070 mutex_unlock(&phy->lock); 2071 flush_work(&pl->resolve); 2072 2073 phy_disconnect(phy); 2074 } 2075 } 2076 EXPORT_SYMBOL_GPL(phylink_disconnect_phy); 2077 2078 static void phylink_link_changed(struct phylink *pl, bool up, const char *what) 2079 { 2080 if (!up) 2081 pl->mac_link_dropped = true; 2082 phylink_run_resolve(pl); 2083 phylink_dbg(pl, "%s link %s\n", what, up ? "up" : "down"); 2084 } 2085 2086 /** 2087 * phylink_mac_change() - notify phylink of a change in MAC state 2088 * @pl: a pointer to a &struct phylink returned from phylink_create() 2089 * @up: indicates whether the link is currently up. 2090 * 2091 * The MAC driver should call this driver when the state of its link 2092 * changes (eg, link failure, new negotiation results, etc.) 2093 */ 2094 void phylink_mac_change(struct phylink *pl, bool up) 2095 { 2096 phylink_link_changed(pl, up, "mac"); 2097 } 2098 EXPORT_SYMBOL_GPL(phylink_mac_change); 2099 2100 /** 2101 * phylink_pcs_change() - notify phylink of a change to PCS link state 2102 * @pcs: pointer to &struct phylink_pcs 2103 * @up: indicates whether the link is currently up. 2104 * 2105 * The PCS driver should call this when the state of its link changes 2106 * (e.g. link failure, new negotiation results, etc.) Note: it should 2107 * not determine "up" by reading the BMSR. If in doubt about the link 2108 * state at interrupt time, then pass true if pcs_get_state() returns 2109 * the latched link-down state, otherwise pass false. 2110 */ 2111 void phylink_pcs_change(struct phylink_pcs *pcs, bool up) 2112 { 2113 struct phylink *pl = pcs->phylink; 2114 2115 if (pl) 2116 phylink_link_changed(pl, up, "pcs"); 2117 } 2118 EXPORT_SYMBOL_GPL(phylink_pcs_change); 2119 2120 static irqreturn_t phylink_link_handler(int irq, void *data) 2121 { 2122 struct phylink *pl = data; 2123 2124 phylink_run_resolve(pl); 2125 2126 return IRQ_HANDLED; 2127 } 2128 2129 /** 2130 * phylink_start() - start a phylink instance 2131 * @pl: a pointer to a &struct phylink returned from phylink_create() 2132 * 2133 * Start the phylink instance specified by @pl, configuring the MAC for the 2134 * desired link mode(s) and negotiation style. This should be called from the 2135 * network device driver's &struct net_device_ops ndo_open() method. 2136 */ 2137 void phylink_start(struct phylink *pl) 2138 { 2139 bool poll = false; 2140 2141 ASSERT_RTNL(); 2142 2143 phylink_info(pl, "configuring for %s/%s link mode\n", 2144 phylink_an_mode_str(pl->cur_link_an_mode), 2145 phy_modes(pl->link_config.interface)); 2146 2147 /* Always set the carrier off */ 2148 if (pl->netdev) 2149 netif_carrier_off(pl->netdev); 2150 2151 pl->pcs_state = PCS_STATE_STARTING; 2152 2153 /* Apply the link configuration to the MAC when starting. This allows 2154 * a fixed-link to start with the correct parameters, and also 2155 * ensures that we set the appropriate advertisement for Serdes links. 2156 * 2157 * Restart autonegotiation if using 802.3z to ensure that the link 2158 * parameters are properly negotiated. This is necessary for DSA 2159 * switches using 802.3z negotiation to ensure they see our modes. 2160 */ 2161 phylink_mac_initial_config(pl, true); 2162 2163 pl->pcs_state = PCS_STATE_STARTED; 2164 2165 phylink_enable_and_run_resolve(pl, PHYLINK_DISABLE_STOPPED); 2166 2167 if (pl->cfg_link_an_mode == MLO_AN_FIXED && pl->link_gpio) { 2168 int irq = gpiod_to_irq(pl->link_gpio); 2169 2170 if (irq > 0) { 2171 if (!request_irq(irq, phylink_link_handler, 2172 IRQF_TRIGGER_RISING | 2173 IRQF_TRIGGER_FALLING, 2174 "netdev link", pl)) 2175 pl->link_irq = irq; 2176 else 2177 irq = 0; 2178 } 2179 if (irq <= 0) 2180 poll = true; 2181 } 2182 2183 if (pl->cfg_link_an_mode == MLO_AN_FIXED) 2184 poll |= pl->config->poll_fixed_state; 2185 2186 if (poll) 2187 mod_timer(&pl->link_poll, jiffies + HZ); 2188 if (pl->phydev) 2189 phy_start(pl->phydev); 2190 if (pl->sfp_bus) 2191 sfp_upstream_start(pl->sfp_bus); 2192 } 2193 EXPORT_SYMBOL_GPL(phylink_start); 2194 2195 /** 2196 * phylink_stop() - stop a phylink instance 2197 * @pl: a pointer to a &struct phylink returned from phylink_create() 2198 * 2199 * Stop the phylink instance specified by @pl. This should be called from the 2200 * network device driver's &struct net_device_ops ndo_stop() method. The 2201 * network device's carrier state should not be changed prior to calling this 2202 * function. 2203 * 2204 * This will synchronously bring down the link if the link is not already 2205 * down (in other words, it will trigger a mac_link_down() method call.) 2206 */ 2207 void phylink_stop(struct phylink *pl) 2208 { 2209 ASSERT_RTNL(); 2210 2211 if (pl->sfp_bus) 2212 sfp_upstream_stop(pl->sfp_bus); 2213 if (pl->phydev) 2214 phy_stop(pl->phydev); 2215 del_timer_sync(&pl->link_poll); 2216 if (pl->link_irq) { 2217 free_irq(pl->link_irq, pl); 2218 pl->link_irq = 0; 2219 } 2220 2221 phylink_run_resolve_and_disable(pl, PHYLINK_DISABLE_STOPPED); 2222 2223 pl->pcs_state = PCS_STATE_DOWN; 2224 2225 phylink_pcs_disable(pl->pcs); 2226 } 2227 EXPORT_SYMBOL_GPL(phylink_stop); 2228 2229 /** 2230 * phylink_suspend() - handle a network device suspend event 2231 * @pl: a pointer to a &struct phylink returned from phylink_create() 2232 * @mac_wol: true if the MAC needs to receive packets for Wake-on-Lan 2233 * 2234 * Handle a network device suspend event. There are several cases: 2235 * 2236 * - If Wake-on-Lan is not active, we can bring down the link between 2237 * the MAC and PHY by calling phylink_stop(). 2238 * - If Wake-on-Lan is active, and being handled only by the PHY, we 2239 * can also bring down the link between the MAC and PHY. 2240 * - If Wake-on-Lan is active, but being handled by the MAC, the MAC 2241 * still needs to receive packets, so we can not bring the link down. 2242 */ 2243 void phylink_suspend(struct phylink *pl, bool mac_wol) 2244 { 2245 ASSERT_RTNL(); 2246 2247 if (mac_wol && (!pl->netdev || pl->netdev->wol_enabled)) { 2248 /* Wake-on-Lan enabled, MAC handling */ 2249 mutex_lock(&pl->state_mutex); 2250 2251 /* Stop the resolver bringing the link up */ 2252 __set_bit(PHYLINK_DISABLE_MAC_WOL, &pl->phylink_disable_state); 2253 2254 /* Disable the carrier, to prevent transmit timeouts, 2255 * but one would hope all packets have been sent. This 2256 * also means phylink_resolve() will do nothing. 2257 */ 2258 if (pl->netdev) 2259 netif_carrier_off(pl->netdev); 2260 else 2261 pl->old_link_state = false; 2262 2263 /* We do not call mac_link_down() here as we want the 2264 * link to remain up to receive the WoL packets. 2265 */ 2266 mutex_unlock(&pl->state_mutex); 2267 } else { 2268 phylink_stop(pl); 2269 } 2270 } 2271 EXPORT_SYMBOL_GPL(phylink_suspend); 2272 2273 /** 2274 * phylink_resume() - handle a network device resume event 2275 * @pl: a pointer to a &struct phylink returned from phylink_create() 2276 * 2277 * Undo the effects of phylink_suspend(), returning the link to an 2278 * operational state. 2279 */ 2280 void phylink_resume(struct phylink *pl) 2281 { 2282 ASSERT_RTNL(); 2283 2284 if (test_bit(PHYLINK_DISABLE_MAC_WOL, &pl->phylink_disable_state)) { 2285 /* Wake-on-Lan enabled, MAC handling */ 2286 2287 /* Call mac_link_down() so we keep the overall state balanced. 2288 * Do this under the state_mutex lock for consistency. This 2289 * will cause a "Link Down" message to be printed during 2290 * resume, which is harmless - the true link state will be 2291 * printed when we run a resolve. 2292 */ 2293 mutex_lock(&pl->state_mutex); 2294 phylink_link_down(pl); 2295 mutex_unlock(&pl->state_mutex); 2296 2297 /* Re-apply the link parameters so that all the settings get 2298 * restored to the MAC. 2299 */ 2300 phylink_mac_initial_config(pl, true); 2301 2302 /* Re-enable and re-resolve the link parameters */ 2303 phylink_enable_and_run_resolve(pl, PHYLINK_DISABLE_MAC_WOL); 2304 } else { 2305 phylink_start(pl); 2306 } 2307 } 2308 EXPORT_SYMBOL_GPL(phylink_resume); 2309 2310 /** 2311 * phylink_ethtool_get_wol() - get the wake on lan parameters for the PHY 2312 * @pl: a pointer to a &struct phylink returned from phylink_create() 2313 * @wol: a pointer to &struct ethtool_wolinfo to hold the read parameters 2314 * 2315 * Read the wake on lan parameters from the PHY attached to the phylink 2316 * instance specified by @pl. If no PHY is currently attached, report no 2317 * support for wake on lan. 2318 */ 2319 void phylink_ethtool_get_wol(struct phylink *pl, struct ethtool_wolinfo *wol) 2320 { 2321 ASSERT_RTNL(); 2322 2323 wol->supported = 0; 2324 wol->wolopts = 0; 2325 2326 if (pl->phydev) 2327 phy_ethtool_get_wol(pl->phydev, wol); 2328 } 2329 EXPORT_SYMBOL_GPL(phylink_ethtool_get_wol); 2330 2331 /** 2332 * phylink_ethtool_set_wol() - set wake on lan parameters 2333 * @pl: a pointer to a &struct phylink returned from phylink_create() 2334 * @wol: a pointer to &struct ethtool_wolinfo for the desired parameters 2335 * 2336 * Set the wake on lan parameters for the PHY attached to the phylink 2337 * instance specified by @pl. If no PHY is attached, returns %EOPNOTSUPP 2338 * error. 2339 * 2340 * Returns zero on success or negative errno code. 2341 */ 2342 int phylink_ethtool_set_wol(struct phylink *pl, struct ethtool_wolinfo *wol) 2343 { 2344 int ret = -EOPNOTSUPP; 2345 2346 ASSERT_RTNL(); 2347 2348 if (pl->phydev) 2349 ret = phy_ethtool_set_wol(pl->phydev, wol); 2350 2351 return ret; 2352 } 2353 EXPORT_SYMBOL_GPL(phylink_ethtool_set_wol); 2354 2355 static void phylink_merge_link_mode(unsigned long *dst, const unsigned long *b) 2356 { 2357 __ETHTOOL_DECLARE_LINK_MODE_MASK(mask); 2358 2359 linkmode_zero(mask); 2360 phylink_set_port_modes(mask); 2361 2362 linkmode_and(dst, dst, mask); 2363 linkmode_or(dst, dst, b); 2364 } 2365 2366 static void phylink_get_ksettings(const struct phylink_link_state *state, 2367 struct ethtool_link_ksettings *kset) 2368 { 2369 phylink_merge_link_mode(kset->link_modes.advertising, state->advertising); 2370 linkmode_copy(kset->link_modes.lp_advertising, state->lp_advertising); 2371 if (kset->base.rate_matching == RATE_MATCH_NONE) { 2372 kset->base.speed = state->speed; 2373 kset->base.duplex = state->duplex; 2374 } 2375 kset->base.autoneg = linkmode_test_bit(ETHTOOL_LINK_MODE_Autoneg_BIT, 2376 state->advertising) ? 2377 AUTONEG_ENABLE : AUTONEG_DISABLE; 2378 } 2379 2380 /** 2381 * phylink_ethtool_ksettings_get() - get the current link settings 2382 * @pl: a pointer to a &struct phylink returned from phylink_create() 2383 * @kset: a pointer to a &struct ethtool_link_ksettings to hold link settings 2384 * 2385 * Read the current link settings for the phylink instance specified by @pl. 2386 * This will be the link settings read from the MAC, PHY or fixed link 2387 * settings depending on the current negotiation mode. 2388 */ 2389 int phylink_ethtool_ksettings_get(struct phylink *pl, 2390 struct ethtool_link_ksettings *kset) 2391 { 2392 struct phylink_link_state link_state; 2393 2394 ASSERT_RTNL(); 2395 2396 if (pl->phydev) 2397 phy_ethtool_ksettings_get(pl->phydev, kset); 2398 else 2399 kset->base.port = pl->link_port; 2400 2401 linkmode_copy(kset->link_modes.supported, pl->supported); 2402 2403 switch (pl->cur_link_an_mode) { 2404 case MLO_AN_FIXED: 2405 /* We are using fixed settings. Report these as the 2406 * current link settings - and note that these also 2407 * represent the supported speeds/duplex/pause modes. 2408 */ 2409 phylink_get_fixed_state(pl, &link_state); 2410 phylink_get_ksettings(&link_state, kset); 2411 break; 2412 2413 case MLO_AN_INBAND: 2414 /* If there is a phy attached, then use the reported 2415 * settings from the phy with no modification. 2416 */ 2417 if (pl->phydev) 2418 break; 2419 2420 phylink_mac_pcs_get_state(pl, &link_state); 2421 2422 /* The MAC is reporting the link results from its own PCS 2423 * layer via in-band status. Report these as the current 2424 * link settings. 2425 */ 2426 phylink_get_ksettings(&link_state, kset); 2427 break; 2428 } 2429 2430 return 0; 2431 } 2432 EXPORT_SYMBOL_GPL(phylink_ethtool_ksettings_get); 2433 2434 /** 2435 * phylink_ethtool_ksettings_set() - set the link settings 2436 * @pl: a pointer to a &struct phylink returned from phylink_create() 2437 * @kset: a pointer to a &struct ethtool_link_ksettings for the desired modes 2438 */ 2439 int phylink_ethtool_ksettings_set(struct phylink *pl, 2440 const struct ethtool_link_ksettings *kset) 2441 { 2442 __ETHTOOL_DECLARE_LINK_MODE_MASK(support); 2443 struct phylink_link_state config; 2444 const struct phy_setting *s; 2445 2446 ASSERT_RTNL(); 2447 2448 if (pl->phydev) { 2449 struct ethtool_link_ksettings phy_kset = *kset; 2450 2451 linkmode_and(phy_kset.link_modes.advertising, 2452 phy_kset.link_modes.advertising, 2453 pl->supported); 2454 2455 /* We can rely on phylib for this update; we also do not need 2456 * to update the pl->link_config settings: 2457 * - the configuration returned via ksettings_get() will come 2458 * from phylib whenever a PHY is present. 2459 * - link_config.interface will be updated by the PHY calling 2460 * back via phylink_phy_change() and a subsequent resolve. 2461 * - initial link configuration for PHY mode comes from the 2462 * last phy state updated via phylink_phy_change(). 2463 * - other configuration changes (e.g. pause modes) are 2464 * performed directly via phylib. 2465 * - if in in-band mode with a PHY, the link configuration 2466 * is passed on the link from the PHY, and all of 2467 * link_config.{speed,duplex,an_enabled,pause} are not used. 2468 * - the only possible use would be link_config.advertising 2469 * pause modes when in 1000base-X mode with a PHY, but in 2470 * the presence of a PHY, this should not be changed as that 2471 * should be determined from the media side advertisement. 2472 */ 2473 return phy_ethtool_ksettings_set(pl->phydev, &phy_kset); 2474 } 2475 2476 config = pl->link_config; 2477 /* Mask out unsupported advertisements */ 2478 linkmode_and(config.advertising, kset->link_modes.advertising, 2479 pl->supported); 2480 2481 /* FIXME: should we reject autoneg if phy/mac does not support it? */ 2482 switch (kset->base.autoneg) { 2483 case AUTONEG_DISABLE: 2484 /* Autonegotiation disabled, select a suitable speed and 2485 * duplex. 2486 */ 2487 s = phy_lookup_setting(kset->base.speed, kset->base.duplex, 2488 pl->supported, false); 2489 if (!s) 2490 return -EINVAL; 2491 2492 /* If we have a fixed link, refuse to change link parameters. 2493 * If the link parameters match, accept them but do nothing. 2494 */ 2495 if (pl->cur_link_an_mode == MLO_AN_FIXED) { 2496 if (s->speed != pl->link_config.speed || 2497 s->duplex != pl->link_config.duplex) 2498 return -EINVAL; 2499 return 0; 2500 } 2501 2502 config.speed = s->speed; 2503 config.duplex = s->duplex; 2504 break; 2505 2506 case AUTONEG_ENABLE: 2507 /* If we have a fixed link, allow autonegotiation (since that 2508 * is our default case) but do not allow the advertisement to 2509 * be changed. If the advertisement matches, simply return. 2510 */ 2511 if (pl->cur_link_an_mode == MLO_AN_FIXED) { 2512 if (!linkmode_equal(config.advertising, 2513 pl->link_config.advertising)) 2514 return -EINVAL; 2515 return 0; 2516 } 2517 2518 config.speed = SPEED_UNKNOWN; 2519 config.duplex = DUPLEX_UNKNOWN; 2520 break; 2521 2522 default: 2523 return -EINVAL; 2524 } 2525 2526 /* We have ruled out the case with a PHY attached, and the 2527 * fixed-link cases. All that is left are in-band links. 2528 */ 2529 linkmode_mod_bit(ETHTOOL_LINK_MODE_Autoneg_BIT, config.advertising, 2530 kset->base.autoneg == AUTONEG_ENABLE); 2531 2532 /* If this link is with an SFP, ensure that changes to advertised modes 2533 * also cause the associated interface to be selected such that the 2534 * link can be configured correctly. 2535 */ 2536 if (pl->sfp_bus) { 2537 config.interface = sfp_select_interface(pl->sfp_bus, 2538 config.advertising); 2539 if (config.interface == PHY_INTERFACE_MODE_NA) { 2540 phylink_err(pl, 2541 "selection of interface failed, advertisement %*pb\n", 2542 __ETHTOOL_LINK_MODE_MASK_NBITS, 2543 config.advertising); 2544 return -EINVAL; 2545 } 2546 2547 /* Revalidate with the selected interface */ 2548 linkmode_copy(support, pl->supported); 2549 if (phylink_validate(pl, support, &config)) { 2550 phylink_err(pl, "validation of %s/%s with support %*pb failed\n", 2551 phylink_an_mode_str(pl->cur_link_an_mode), 2552 phy_modes(config.interface), 2553 __ETHTOOL_LINK_MODE_MASK_NBITS, support); 2554 return -EINVAL; 2555 } 2556 } else { 2557 /* Validate without changing the current supported mask. */ 2558 linkmode_copy(support, pl->supported); 2559 if (phylink_validate(pl, support, &config)) 2560 return -EINVAL; 2561 } 2562 2563 /* If autonegotiation is enabled, we must have an advertisement */ 2564 if (linkmode_test_bit(ETHTOOL_LINK_MODE_Autoneg_BIT, 2565 config.advertising) && 2566 phylink_is_empty_linkmode(config.advertising)) 2567 return -EINVAL; 2568 2569 mutex_lock(&pl->state_mutex); 2570 pl->link_config.speed = config.speed; 2571 pl->link_config.duplex = config.duplex; 2572 2573 if (pl->link_config.interface != config.interface) { 2574 /* The interface changed, e.g. 1000base-X <-> 2500base-X */ 2575 /* We need to force the link down, then change the interface */ 2576 if (pl->old_link_state) { 2577 phylink_link_down(pl); 2578 pl->old_link_state = false; 2579 } 2580 if (!test_bit(PHYLINK_DISABLE_STOPPED, 2581 &pl->phylink_disable_state)) 2582 phylink_major_config(pl, false, &config); 2583 pl->link_config.interface = config.interface; 2584 linkmode_copy(pl->link_config.advertising, config.advertising); 2585 } else if (!linkmode_equal(pl->link_config.advertising, 2586 config.advertising)) { 2587 linkmode_copy(pl->link_config.advertising, config.advertising); 2588 phylink_change_inband_advert(pl); 2589 } 2590 mutex_unlock(&pl->state_mutex); 2591 2592 return 0; 2593 } 2594 EXPORT_SYMBOL_GPL(phylink_ethtool_ksettings_set); 2595 2596 /** 2597 * phylink_ethtool_nway_reset() - restart negotiation 2598 * @pl: a pointer to a &struct phylink returned from phylink_create() 2599 * 2600 * Restart negotiation for the phylink instance specified by @pl. This will 2601 * cause any attached phy to restart negotiation with the link partner, and 2602 * if the MAC is in a BaseX mode, the MAC will also be requested to restart 2603 * negotiation. 2604 * 2605 * Returns zero on success, or negative error code. 2606 */ 2607 int phylink_ethtool_nway_reset(struct phylink *pl) 2608 { 2609 int ret = 0; 2610 2611 ASSERT_RTNL(); 2612 2613 if (pl->phydev) 2614 ret = phy_restart_aneg(pl->phydev); 2615 phylink_pcs_an_restart(pl); 2616 2617 return ret; 2618 } 2619 EXPORT_SYMBOL_GPL(phylink_ethtool_nway_reset); 2620 2621 /** 2622 * phylink_ethtool_get_pauseparam() - get the current pause parameters 2623 * @pl: a pointer to a &struct phylink returned from phylink_create() 2624 * @pause: a pointer to a &struct ethtool_pauseparam 2625 */ 2626 void phylink_ethtool_get_pauseparam(struct phylink *pl, 2627 struct ethtool_pauseparam *pause) 2628 { 2629 ASSERT_RTNL(); 2630 2631 pause->autoneg = !!(pl->link_config.pause & MLO_PAUSE_AN); 2632 pause->rx_pause = !!(pl->link_config.pause & MLO_PAUSE_RX); 2633 pause->tx_pause = !!(pl->link_config.pause & MLO_PAUSE_TX); 2634 } 2635 EXPORT_SYMBOL_GPL(phylink_ethtool_get_pauseparam); 2636 2637 /** 2638 * phylink_ethtool_set_pauseparam() - set the current pause parameters 2639 * @pl: a pointer to a &struct phylink returned from phylink_create() 2640 * @pause: a pointer to a &struct ethtool_pauseparam 2641 */ 2642 int phylink_ethtool_set_pauseparam(struct phylink *pl, 2643 struct ethtool_pauseparam *pause) 2644 { 2645 struct phylink_link_state *config = &pl->link_config; 2646 bool manual_changed; 2647 int pause_state; 2648 2649 ASSERT_RTNL(); 2650 2651 if (pl->cur_link_an_mode == MLO_AN_FIXED) 2652 return -EOPNOTSUPP; 2653 2654 if (!phylink_test(pl->supported, Pause) && 2655 !phylink_test(pl->supported, Asym_Pause)) 2656 return -EOPNOTSUPP; 2657 2658 if (!phylink_test(pl->supported, Asym_Pause) && 2659 pause->rx_pause != pause->tx_pause) 2660 return -EINVAL; 2661 2662 pause_state = 0; 2663 if (pause->autoneg) 2664 pause_state |= MLO_PAUSE_AN; 2665 if (pause->rx_pause) 2666 pause_state |= MLO_PAUSE_RX; 2667 if (pause->tx_pause) 2668 pause_state |= MLO_PAUSE_TX; 2669 2670 mutex_lock(&pl->state_mutex); 2671 /* 2672 * See the comments for linkmode_set_pause(), wrt the deficiencies 2673 * with the current implementation. A solution to this issue would 2674 * be: 2675 * ethtool Local device 2676 * rx tx Pause AsymDir 2677 * 0 0 0 0 2678 * 1 0 1 1 2679 * 0 1 0 1 2680 * 1 1 1 1 2681 * and then use the ethtool rx/tx enablement status to mask the 2682 * rx/tx pause resolution. 2683 */ 2684 linkmode_set_pause(config->advertising, pause->tx_pause, 2685 pause->rx_pause); 2686 2687 manual_changed = (config->pause ^ pause_state) & MLO_PAUSE_AN || 2688 (!(pause_state & MLO_PAUSE_AN) && 2689 (config->pause ^ pause_state) & MLO_PAUSE_TXRX_MASK); 2690 2691 config->pause = pause_state; 2692 2693 /* Update our in-band advertisement, triggering a renegotiation if 2694 * the advertisement changed. 2695 */ 2696 if (!pl->phydev) 2697 phylink_change_inband_advert(pl); 2698 2699 mutex_unlock(&pl->state_mutex); 2700 2701 /* If we have a PHY, a change of the pause frame advertisement will 2702 * cause phylib to renegotiate (if AN is enabled) which will in turn 2703 * call our phylink_phy_change() and trigger a resolve. Note that 2704 * we can't hold our state mutex while calling phy_set_asym_pause(). 2705 */ 2706 if (pl->phydev) 2707 phy_set_asym_pause(pl->phydev, pause->rx_pause, 2708 pause->tx_pause); 2709 2710 /* If the manual pause settings changed, make sure we trigger a 2711 * resolve to update their state; we can not guarantee that the 2712 * link will cycle. 2713 */ 2714 if (manual_changed) { 2715 pl->mac_link_dropped = true; 2716 phylink_run_resolve(pl); 2717 } 2718 2719 return 0; 2720 } 2721 EXPORT_SYMBOL_GPL(phylink_ethtool_set_pauseparam); 2722 2723 /** 2724 * phylink_get_eee_err() - read the energy efficient ethernet error 2725 * counter 2726 * @pl: a pointer to a &struct phylink returned from phylink_create(). 2727 * 2728 * Read the Energy Efficient Ethernet error counter from the PHY associated 2729 * with the phylink instance specified by @pl. 2730 * 2731 * Returns positive error counter value, or negative error code. 2732 */ 2733 int phylink_get_eee_err(struct phylink *pl) 2734 { 2735 int ret = 0; 2736 2737 ASSERT_RTNL(); 2738 2739 if (pl->phydev) 2740 ret = phy_get_eee_err(pl->phydev); 2741 2742 return ret; 2743 } 2744 EXPORT_SYMBOL_GPL(phylink_get_eee_err); 2745 2746 /** 2747 * phylink_init_eee() - init and check the EEE features 2748 * @pl: a pointer to a &struct phylink returned from phylink_create() 2749 * @clk_stop_enable: allow PHY to stop receive clock 2750 * 2751 * Must be called either with RTNL held or within mac_link_up() 2752 */ 2753 int phylink_init_eee(struct phylink *pl, bool clk_stop_enable) 2754 { 2755 int ret = -EOPNOTSUPP; 2756 2757 if (pl->phydev) 2758 ret = phy_init_eee(pl->phydev, clk_stop_enable); 2759 2760 return ret; 2761 } 2762 EXPORT_SYMBOL_GPL(phylink_init_eee); 2763 2764 /** 2765 * phylink_ethtool_get_eee() - read the energy efficient ethernet parameters 2766 * @pl: a pointer to a &struct phylink returned from phylink_create() 2767 * @eee: a pointer to a &struct ethtool_keee for the read parameters 2768 */ 2769 int phylink_ethtool_get_eee(struct phylink *pl, struct ethtool_keee *eee) 2770 { 2771 int ret = -EOPNOTSUPP; 2772 2773 ASSERT_RTNL(); 2774 2775 if (pl->phydev) 2776 ret = phy_ethtool_get_eee(pl->phydev, eee); 2777 2778 return ret; 2779 } 2780 EXPORT_SYMBOL_GPL(phylink_ethtool_get_eee); 2781 2782 /** 2783 * phylink_ethtool_set_eee() - set the energy efficient ethernet parameters 2784 * @pl: a pointer to a &struct phylink returned from phylink_create() 2785 * @eee: a pointer to a &struct ethtool_keee for the desired parameters 2786 */ 2787 int phylink_ethtool_set_eee(struct phylink *pl, struct ethtool_keee *eee) 2788 { 2789 int ret = -EOPNOTSUPP; 2790 2791 ASSERT_RTNL(); 2792 2793 if (pl->phydev) 2794 ret = phy_ethtool_set_eee(pl->phydev, eee); 2795 2796 return ret; 2797 } 2798 EXPORT_SYMBOL_GPL(phylink_ethtool_set_eee); 2799 2800 /* This emulates MII registers for a fixed-mode phy operating as per the 2801 * passed in state. "aneg" defines if we report negotiation is possible. 2802 * 2803 * FIXME: should deal with negotiation state too. 2804 */ 2805 static int phylink_mii_emul_read(unsigned int reg, 2806 struct phylink_link_state *state) 2807 { 2808 struct fixed_phy_status fs; 2809 unsigned long *lpa = state->lp_advertising; 2810 int val; 2811 2812 fs.link = state->link; 2813 fs.speed = state->speed; 2814 fs.duplex = state->duplex; 2815 fs.pause = test_bit(ETHTOOL_LINK_MODE_Pause_BIT, lpa); 2816 fs.asym_pause = test_bit(ETHTOOL_LINK_MODE_Asym_Pause_BIT, lpa); 2817 2818 val = swphy_read_reg(reg, &fs); 2819 if (reg == MII_BMSR) { 2820 if (!state->an_complete) 2821 val &= ~BMSR_ANEGCOMPLETE; 2822 } 2823 return val; 2824 } 2825 2826 static int phylink_phy_read(struct phylink *pl, unsigned int phy_id, 2827 unsigned int reg) 2828 { 2829 struct phy_device *phydev = pl->phydev; 2830 int prtad, devad; 2831 2832 if (mdio_phy_id_is_c45(phy_id)) { 2833 prtad = mdio_phy_id_prtad(phy_id); 2834 devad = mdio_phy_id_devad(phy_id); 2835 return mdiobus_c45_read(pl->phydev->mdio.bus, prtad, devad, 2836 reg); 2837 } 2838 2839 if (phydev->is_c45) { 2840 switch (reg) { 2841 case MII_BMCR: 2842 case MII_BMSR: 2843 case MII_PHYSID1: 2844 case MII_PHYSID2: 2845 devad = __ffs(phydev->c45_ids.mmds_present); 2846 break; 2847 case MII_ADVERTISE: 2848 case MII_LPA: 2849 if (!(phydev->c45_ids.mmds_present & MDIO_DEVS_AN)) 2850 return -EINVAL; 2851 devad = MDIO_MMD_AN; 2852 if (reg == MII_ADVERTISE) 2853 reg = MDIO_AN_ADVERTISE; 2854 else 2855 reg = MDIO_AN_LPA; 2856 break; 2857 default: 2858 return -EINVAL; 2859 } 2860 prtad = phy_id; 2861 return mdiobus_c45_read(pl->phydev->mdio.bus, prtad, devad, 2862 reg); 2863 } 2864 2865 return mdiobus_read(pl->phydev->mdio.bus, phy_id, reg); 2866 } 2867 2868 static int phylink_phy_write(struct phylink *pl, unsigned int phy_id, 2869 unsigned int reg, unsigned int val) 2870 { 2871 struct phy_device *phydev = pl->phydev; 2872 int prtad, devad; 2873 2874 if (mdio_phy_id_is_c45(phy_id)) { 2875 prtad = mdio_phy_id_prtad(phy_id); 2876 devad = mdio_phy_id_devad(phy_id); 2877 return mdiobus_c45_write(pl->phydev->mdio.bus, prtad, devad, 2878 reg, val); 2879 } 2880 2881 if (phydev->is_c45) { 2882 switch (reg) { 2883 case MII_BMCR: 2884 case MII_BMSR: 2885 case MII_PHYSID1: 2886 case MII_PHYSID2: 2887 devad = __ffs(phydev->c45_ids.mmds_present); 2888 break; 2889 case MII_ADVERTISE: 2890 case MII_LPA: 2891 if (!(phydev->c45_ids.mmds_present & MDIO_DEVS_AN)) 2892 return -EINVAL; 2893 devad = MDIO_MMD_AN; 2894 if (reg == MII_ADVERTISE) 2895 reg = MDIO_AN_ADVERTISE; 2896 else 2897 reg = MDIO_AN_LPA; 2898 break; 2899 default: 2900 return -EINVAL; 2901 } 2902 return mdiobus_c45_write(pl->phydev->mdio.bus, phy_id, devad, 2903 reg, val); 2904 } 2905 2906 return mdiobus_write(phydev->mdio.bus, phy_id, reg, val); 2907 } 2908 2909 static int phylink_mii_read(struct phylink *pl, unsigned int phy_id, 2910 unsigned int reg) 2911 { 2912 struct phylink_link_state state; 2913 int val = 0xffff; 2914 2915 switch (pl->cur_link_an_mode) { 2916 case MLO_AN_FIXED: 2917 if (phy_id == 0) { 2918 phylink_get_fixed_state(pl, &state); 2919 val = phylink_mii_emul_read(reg, &state); 2920 } 2921 break; 2922 2923 case MLO_AN_PHY: 2924 return -EOPNOTSUPP; 2925 2926 case MLO_AN_INBAND: 2927 if (phy_id == 0) { 2928 phylink_mac_pcs_get_state(pl, &state); 2929 val = phylink_mii_emul_read(reg, &state); 2930 } 2931 break; 2932 } 2933 2934 return val & 0xffff; 2935 } 2936 2937 static int phylink_mii_write(struct phylink *pl, unsigned int phy_id, 2938 unsigned int reg, unsigned int val) 2939 { 2940 switch (pl->cur_link_an_mode) { 2941 case MLO_AN_FIXED: 2942 break; 2943 2944 case MLO_AN_PHY: 2945 return -EOPNOTSUPP; 2946 2947 case MLO_AN_INBAND: 2948 break; 2949 } 2950 2951 return 0; 2952 } 2953 2954 /** 2955 * phylink_mii_ioctl() - generic mii ioctl interface 2956 * @pl: a pointer to a &struct phylink returned from phylink_create() 2957 * @ifr: a pointer to a &struct ifreq for socket ioctls 2958 * @cmd: ioctl cmd to execute 2959 * 2960 * Perform the specified MII ioctl on the PHY attached to the phylink instance 2961 * specified by @pl. If no PHY is attached, emulate the presence of the PHY. 2962 * 2963 * Returns: zero on success or negative error code. 2964 * 2965 * %SIOCGMIIPHY: 2966 * read register from the current PHY. 2967 * %SIOCGMIIREG: 2968 * read register from the specified PHY. 2969 * %SIOCSMIIREG: 2970 * set a register on the specified PHY. 2971 */ 2972 int phylink_mii_ioctl(struct phylink *pl, struct ifreq *ifr, int cmd) 2973 { 2974 struct mii_ioctl_data *mii = if_mii(ifr); 2975 int ret; 2976 2977 ASSERT_RTNL(); 2978 2979 if (pl->phydev) { 2980 /* PHYs only exist for MLO_AN_PHY and SGMII */ 2981 switch (cmd) { 2982 case SIOCGMIIPHY: 2983 mii->phy_id = pl->phydev->mdio.addr; 2984 fallthrough; 2985 2986 case SIOCGMIIREG: 2987 ret = phylink_phy_read(pl, mii->phy_id, mii->reg_num); 2988 if (ret >= 0) { 2989 mii->val_out = ret; 2990 ret = 0; 2991 } 2992 break; 2993 2994 case SIOCSMIIREG: 2995 ret = phylink_phy_write(pl, mii->phy_id, mii->reg_num, 2996 mii->val_in); 2997 break; 2998 2999 default: 3000 ret = phy_mii_ioctl(pl->phydev, ifr, cmd); 3001 break; 3002 } 3003 } else { 3004 switch (cmd) { 3005 case SIOCGMIIPHY: 3006 mii->phy_id = 0; 3007 fallthrough; 3008 3009 case SIOCGMIIREG: 3010 ret = phylink_mii_read(pl, mii->phy_id, mii->reg_num); 3011 if (ret >= 0) { 3012 mii->val_out = ret; 3013 ret = 0; 3014 } 3015 break; 3016 3017 case SIOCSMIIREG: 3018 ret = phylink_mii_write(pl, mii->phy_id, mii->reg_num, 3019 mii->val_in); 3020 break; 3021 3022 default: 3023 ret = -EOPNOTSUPP; 3024 break; 3025 } 3026 } 3027 3028 return ret; 3029 } 3030 EXPORT_SYMBOL_GPL(phylink_mii_ioctl); 3031 3032 /** 3033 * phylink_speed_down() - set the non-SFP PHY to lowest speed supported by both 3034 * link partners 3035 * @pl: a pointer to a &struct phylink returned from phylink_create() 3036 * @sync: perform action synchronously 3037 * 3038 * If we have a PHY that is not part of a SFP module, then set the speed 3039 * as described in the phy_speed_down() function. Please see this function 3040 * for a description of the @sync parameter. 3041 * 3042 * Returns zero if there is no PHY, otherwise as per phy_speed_down(). 3043 */ 3044 int phylink_speed_down(struct phylink *pl, bool sync) 3045 { 3046 int ret = 0; 3047 3048 ASSERT_RTNL(); 3049 3050 if (!pl->sfp_bus && pl->phydev) 3051 ret = phy_speed_down(pl->phydev, sync); 3052 3053 return ret; 3054 } 3055 EXPORT_SYMBOL_GPL(phylink_speed_down); 3056 3057 /** 3058 * phylink_speed_up() - restore the advertised speeds prior to the call to 3059 * phylink_speed_down() 3060 * @pl: a pointer to a &struct phylink returned from phylink_create() 3061 * 3062 * If we have a PHY that is not part of a SFP module, then restore the 3063 * PHY speeds as per phy_speed_up(). 3064 * 3065 * Returns zero if there is no PHY, otherwise as per phy_speed_up(). 3066 */ 3067 int phylink_speed_up(struct phylink *pl) 3068 { 3069 int ret = 0; 3070 3071 ASSERT_RTNL(); 3072 3073 if (!pl->sfp_bus && pl->phydev) 3074 ret = phy_speed_up(pl->phydev); 3075 3076 return ret; 3077 } 3078 EXPORT_SYMBOL_GPL(phylink_speed_up); 3079 3080 static void phylink_sfp_attach(void *upstream, struct sfp_bus *bus) 3081 { 3082 struct phylink *pl = upstream; 3083 3084 pl->netdev->sfp_bus = bus; 3085 } 3086 3087 static void phylink_sfp_detach(void *upstream, struct sfp_bus *bus) 3088 { 3089 struct phylink *pl = upstream; 3090 3091 pl->netdev->sfp_bus = NULL; 3092 } 3093 3094 static phy_interface_t phylink_choose_sfp_interface(struct phylink *pl, 3095 const unsigned long *intf) 3096 { 3097 phy_interface_t interface; 3098 size_t i; 3099 3100 interface = PHY_INTERFACE_MODE_NA; 3101 for (i = 0; i < ARRAY_SIZE(phylink_sfp_interface_preference); i++) 3102 if (test_bit(phylink_sfp_interface_preference[i], intf)) { 3103 interface = phylink_sfp_interface_preference[i]; 3104 break; 3105 } 3106 3107 return interface; 3108 } 3109 3110 static void phylink_sfp_set_config(struct phylink *pl, u8 mode, 3111 unsigned long *supported, 3112 struct phylink_link_state *state) 3113 { 3114 bool changed = false; 3115 3116 phylink_dbg(pl, "requesting link mode %s/%s with support %*pb\n", 3117 phylink_an_mode_str(mode), phy_modes(state->interface), 3118 __ETHTOOL_LINK_MODE_MASK_NBITS, supported); 3119 3120 if (!linkmode_equal(pl->supported, supported)) { 3121 linkmode_copy(pl->supported, supported); 3122 changed = true; 3123 } 3124 3125 if (!linkmode_equal(pl->link_config.advertising, state->advertising)) { 3126 linkmode_copy(pl->link_config.advertising, state->advertising); 3127 changed = true; 3128 } 3129 3130 if (pl->cur_link_an_mode != mode || 3131 pl->link_config.interface != state->interface) { 3132 pl->cur_link_an_mode = mode; 3133 pl->link_config.interface = state->interface; 3134 3135 changed = true; 3136 3137 phylink_info(pl, "switched to %s/%s link mode\n", 3138 phylink_an_mode_str(mode), 3139 phy_modes(state->interface)); 3140 } 3141 3142 if (changed && !test_bit(PHYLINK_DISABLE_STOPPED, 3143 &pl->phylink_disable_state)) 3144 phylink_mac_initial_config(pl, false); 3145 } 3146 3147 static int phylink_sfp_config_phy(struct phylink *pl, u8 mode, 3148 struct phy_device *phy) 3149 { 3150 __ETHTOOL_DECLARE_LINK_MODE_MASK(support1); 3151 __ETHTOOL_DECLARE_LINK_MODE_MASK(support); 3152 struct phylink_link_state config; 3153 phy_interface_t iface; 3154 int ret; 3155 3156 linkmode_copy(support, phy->supported); 3157 3158 memset(&config, 0, sizeof(config)); 3159 linkmode_copy(config.advertising, phy->advertising); 3160 config.interface = PHY_INTERFACE_MODE_NA; 3161 config.speed = SPEED_UNKNOWN; 3162 config.duplex = DUPLEX_UNKNOWN; 3163 config.pause = MLO_PAUSE_AN; 3164 3165 /* Ignore errors if we're expecting a PHY to attach later */ 3166 ret = phylink_validate(pl, support, &config); 3167 if (ret) { 3168 phylink_err(pl, "validation with support %*pb failed: %pe\n", 3169 __ETHTOOL_LINK_MODE_MASK_NBITS, support, 3170 ERR_PTR(ret)); 3171 return ret; 3172 } 3173 3174 iface = sfp_select_interface(pl->sfp_bus, config.advertising); 3175 if (iface == PHY_INTERFACE_MODE_NA) { 3176 phylink_err(pl, 3177 "selection of interface failed, advertisement %*pb\n", 3178 __ETHTOOL_LINK_MODE_MASK_NBITS, config.advertising); 3179 return -EINVAL; 3180 } 3181 3182 config.interface = iface; 3183 linkmode_copy(support1, support); 3184 ret = phylink_validate(pl, support1, &config); 3185 if (ret) { 3186 phylink_err(pl, 3187 "validation of %s/%s with support %*pb failed: %pe\n", 3188 phylink_an_mode_str(mode), 3189 phy_modes(config.interface), 3190 __ETHTOOL_LINK_MODE_MASK_NBITS, support, 3191 ERR_PTR(ret)); 3192 return ret; 3193 } 3194 3195 pl->link_port = pl->sfp_port; 3196 3197 phylink_sfp_set_config(pl, mode, support, &config); 3198 3199 return 0; 3200 } 3201 3202 static int phylink_sfp_config_optical(struct phylink *pl) 3203 { 3204 __ETHTOOL_DECLARE_LINK_MODE_MASK(support); 3205 DECLARE_PHY_INTERFACE_MASK(interfaces); 3206 struct phylink_link_state config; 3207 phy_interface_t interface; 3208 int ret; 3209 3210 phylink_dbg(pl, "optical SFP: interfaces=[mac=%*pbl, sfp=%*pbl]\n", 3211 (int)PHY_INTERFACE_MODE_MAX, 3212 pl->config->supported_interfaces, 3213 (int)PHY_INTERFACE_MODE_MAX, 3214 pl->sfp_interfaces); 3215 3216 /* Find the union of the supported interfaces by the PCS/MAC and 3217 * the SFP module. 3218 */ 3219 phy_interface_and(interfaces, pl->config->supported_interfaces, 3220 pl->sfp_interfaces); 3221 if (phy_interface_empty(interfaces)) { 3222 phylink_err(pl, "unsupported SFP module: no common interface modes\n"); 3223 return -EINVAL; 3224 } 3225 3226 memset(&config, 0, sizeof(config)); 3227 linkmode_copy(support, pl->sfp_support); 3228 linkmode_copy(config.advertising, pl->sfp_support); 3229 config.speed = SPEED_UNKNOWN; 3230 config.duplex = DUPLEX_UNKNOWN; 3231 config.pause = MLO_PAUSE_AN; 3232 3233 /* For all the interfaces that are supported, reduce the sfp_support 3234 * mask to only those link modes that can be supported. 3235 */ 3236 ret = phylink_validate_mask(pl, NULL, pl->sfp_support, &config, 3237 interfaces); 3238 if (ret) { 3239 phylink_err(pl, "unsupported SFP module: validation with support %*pb failed\n", 3240 __ETHTOOL_LINK_MODE_MASK_NBITS, support); 3241 return ret; 3242 } 3243 3244 interface = phylink_choose_sfp_interface(pl, interfaces); 3245 if (interface == PHY_INTERFACE_MODE_NA) { 3246 phylink_err(pl, "failed to select SFP interface\n"); 3247 return -EINVAL; 3248 } 3249 3250 phylink_dbg(pl, "optical SFP: chosen %s interface\n", 3251 phy_modes(interface)); 3252 3253 config.interface = interface; 3254 3255 /* Ignore errors if we're expecting a PHY to attach later */ 3256 ret = phylink_validate(pl, support, &config); 3257 if (ret) { 3258 phylink_err(pl, "validation with support %*pb failed: %pe\n", 3259 __ETHTOOL_LINK_MODE_MASK_NBITS, support, 3260 ERR_PTR(ret)); 3261 return ret; 3262 } 3263 3264 pl->link_port = pl->sfp_port; 3265 3266 phylink_sfp_set_config(pl, MLO_AN_INBAND, pl->sfp_support, &config); 3267 3268 return 0; 3269 } 3270 3271 static int phylink_sfp_module_insert(void *upstream, 3272 const struct sfp_eeprom_id *id) 3273 { 3274 struct phylink *pl = upstream; 3275 3276 ASSERT_RTNL(); 3277 3278 linkmode_zero(pl->sfp_support); 3279 phy_interface_zero(pl->sfp_interfaces); 3280 sfp_parse_support(pl->sfp_bus, id, pl->sfp_support, pl->sfp_interfaces); 3281 pl->sfp_port = sfp_parse_port(pl->sfp_bus, id, pl->sfp_support); 3282 3283 /* If this module may have a PHY connecting later, defer until later */ 3284 pl->sfp_may_have_phy = sfp_may_have_phy(pl->sfp_bus, id); 3285 if (pl->sfp_may_have_phy) 3286 return 0; 3287 3288 return phylink_sfp_config_optical(pl); 3289 } 3290 3291 static int phylink_sfp_module_start(void *upstream) 3292 { 3293 struct phylink *pl = upstream; 3294 3295 /* If this SFP module has a PHY, start the PHY now. */ 3296 if (pl->phydev) { 3297 phy_start(pl->phydev); 3298 return 0; 3299 } 3300 3301 /* If the module may have a PHY but we didn't detect one we 3302 * need to configure the MAC here. 3303 */ 3304 if (!pl->sfp_may_have_phy) 3305 return 0; 3306 3307 return phylink_sfp_config_optical(pl); 3308 } 3309 3310 static void phylink_sfp_module_stop(void *upstream) 3311 { 3312 struct phylink *pl = upstream; 3313 3314 /* If this SFP module has a PHY, stop it. */ 3315 if (pl->phydev) 3316 phy_stop(pl->phydev); 3317 } 3318 3319 static void phylink_sfp_link_down(void *upstream) 3320 { 3321 struct phylink *pl = upstream; 3322 3323 ASSERT_RTNL(); 3324 3325 phylink_run_resolve_and_disable(pl, PHYLINK_DISABLE_LINK); 3326 } 3327 3328 static void phylink_sfp_link_up(void *upstream) 3329 { 3330 struct phylink *pl = upstream; 3331 3332 ASSERT_RTNL(); 3333 3334 phylink_enable_and_run_resolve(pl, PHYLINK_DISABLE_LINK); 3335 } 3336 3337 /* The Broadcom BCM84881 in the Methode DM7052 is unable to provide a SGMII 3338 * or 802.3z control word, so inband will not work. 3339 */ 3340 static bool phylink_phy_no_inband(struct phy_device *phy) 3341 { 3342 return phy->is_c45 && phy_id_compare(phy->c45_ids.device_ids[1], 3343 0xae025150, 0xfffffff0); 3344 } 3345 3346 static int phylink_sfp_connect_phy(void *upstream, struct phy_device *phy) 3347 { 3348 struct phylink *pl = upstream; 3349 phy_interface_t interface; 3350 u8 mode; 3351 int ret; 3352 3353 /* 3354 * This is the new way of dealing with flow control for PHYs, 3355 * as described by Timur Tabi in commit 529ed1275263 ("net: phy: 3356 * phy drivers should not set SUPPORTED_[Asym_]Pause") except 3357 * using our validate call to the MAC, we rely upon the MAC 3358 * clearing the bits from both supported and advertising fields. 3359 */ 3360 phy_support_asym_pause(phy); 3361 3362 if (phylink_phy_no_inband(phy)) 3363 mode = MLO_AN_PHY; 3364 else 3365 mode = MLO_AN_INBAND; 3366 3367 /* Set the PHY's host supported interfaces */ 3368 phy_interface_and(phy->host_interfaces, phylink_sfp_interfaces, 3369 pl->config->supported_interfaces); 3370 3371 /* Do the initial configuration */ 3372 ret = phylink_sfp_config_phy(pl, mode, phy); 3373 if (ret < 0) 3374 return ret; 3375 3376 interface = pl->link_config.interface; 3377 ret = phylink_attach_phy(pl, phy, interface); 3378 if (ret < 0) 3379 return ret; 3380 3381 ret = phylink_bringup_phy(pl, phy, interface); 3382 if (ret) 3383 phy_detach(phy); 3384 3385 return ret; 3386 } 3387 3388 static void phylink_sfp_disconnect_phy(void *upstream) 3389 { 3390 phylink_disconnect_phy(upstream); 3391 } 3392 3393 static const struct sfp_upstream_ops sfp_phylink_ops = { 3394 .attach = phylink_sfp_attach, 3395 .detach = phylink_sfp_detach, 3396 .module_insert = phylink_sfp_module_insert, 3397 .module_start = phylink_sfp_module_start, 3398 .module_stop = phylink_sfp_module_stop, 3399 .link_up = phylink_sfp_link_up, 3400 .link_down = phylink_sfp_link_down, 3401 .connect_phy = phylink_sfp_connect_phy, 3402 .disconnect_phy = phylink_sfp_disconnect_phy, 3403 }; 3404 3405 /* Helpers for MAC drivers */ 3406 3407 static struct { 3408 int bit; 3409 int speed; 3410 } phylink_c73_priority_resolution[] = { 3411 { ETHTOOL_LINK_MODE_100000baseCR4_Full_BIT, SPEED_100000 }, 3412 { ETHTOOL_LINK_MODE_100000baseKR4_Full_BIT, SPEED_100000 }, 3413 /* 100GBASE-KP4 and 100GBASE-CR10 not supported */ 3414 { ETHTOOL_LINK_MODE_40000baseCR4_Full_BIT, SPEED_40000 }, 3415 { ETHTOOL_LINK_MODE_40000baseKR4_Full_BIT, SPEED_40000 }, 3416 { ETHTOOL_LINK_MODE_10000baseKR_Full_BIT, SPEED_10000 }, 3417 { ETHTOOL_LINK_MODE_10000baseKX4_Full_BIT, SPEED_10000 }, 3418 /* 5GBASE-KR not supported */ 3419 { ETHTOOL_LINK_MODE_2500baseX_Full_BIT, SPEED_2500 }, 3420 { ETHTOOL_LINK_MODE_1000baseKX_Full_BIT, SPEED_1000 }, 3421 }; 3422 3423 void phylink_resolve_c73(struct phylink_link_state *state) 3424 { 3425 int i; 3426 3427 for (i = 0; i < ARRAY_SIZE(phylink_c73_priority_resolution); i++) { 3428 int bit = phylink_c73_priority_resolution[i].bit; 3429 if (linkmode_test_bit(bit, state->advertising) && 3430 linkmode_test_bit(bit, state->lp_advertising)) 3431 break; 3432 } 3433 3434 if (i < ARRAY_SIZE(phylink_c73_priority_resolution)) { 3435 state->speed = phylink_c73_priority_resolution[i].speed; 3436 state->duplex = DUPLEX_FULL; 3437 } else { 3438 /* negotiation failure */ 3439 state->link = false; 3440 } 3441 3442 phylink_resolve_an_pause(state); 3443 } 3444 EXPORT_SYMBOL_GPL(phylink_resolve_c73); 3445 3446 static void phylink_decode_c37_word(struct phylink_link_state *state, 3447 uint16_t config_reg, int speed) 3448 { 3449 int fd_bit; 3450 3451 if (speed == SPEED_2500) 3452 fd_bit = ETHTOOL_LINK_MODE_2500baseX_Full_BIT; 3453 else 3454 fd_bit = ETHTOOL_LINK_MODE_1000baseX_Full_BIT; 3455 3456 mii_lpa_mod_linkmode_x(state->lp_advertising, config_reg, fd_bit); 3457 3458 if (linkmode_test_bit(fd_bit, state->advertising) && 3459 linkmode_test_bit(fd_bit, state->lp_advertising)) { 3460 state->speed = speed; 3461 state->duplex = DUPLEX_FULL; 3462 } else { 3463 /* negotiation failure */ 3464 state->link = false; 3465 } 3466 3467 phylink_resolve_an_pause(state); 3468 } 3469 3470 static void phylink_decode_sgmii_word(struct phylink_link_state *state, 3471 uint16_t config_reg) 3472 { 3473 if (!(config_reg & LPA_SGMII_LINK)) { 3474 state->link = false; 3475 return; 3476 } 3477 3478 switch (config_reg & LPA_SGMII_SPD_MASK) { 3479 case LPA_SGMII_10: 3480 state->speed = SPEED_10; 3481 break; 3482 case LPA_SGMII_100: 3483 state->speed = SPEED_100; 3484 break; 3485 case LPA_SGMII_1000: 3486 state->speed = SPEED_1000; 3487 break; 3488 default: 3489 state->link = false; 3490 return; 3491 } 3492 if (config_reg & LPA_SGMII_FULL_DUPLEX) 3493 state->duplex = DUPLEX_FULL; 3494 else 3495 state->duplex = DUPLEX_HALF; 3496 } 3497 3498 /** 3499 * phylink_decode_usxgmii_word() - decode the USXGMII word from a MAC PCS 3500 * @state: a pointer to a struct phylink_link_state. 3501 * @lpa: a 16 bit value which stores the USXGMII auto-negotiation word 3502 * 3503 * Helper for MAC PCS supporting the USXGMII protocol and the auto-negotiation 3504 * code word. Decode the USXGMII code word and populate the corresponding fields 3505 * (speed, duplex) into the phylink_link_state structure. 3506 */ 3507 void phylink_decode_usxgmii_word(struct phylink_link_state *state, 3508 uint16_t lpa) 3509 { 3510 switch (lpa & MDIO_USXGMII_SPD_MASK) { 3511 case MDIO_USXGMII_10: 3512 state->speed = SPEED_10; 3513 break; 3514 case MDIO_USXGMII_100: 3515 state->speed = SPEED_100; 3516 break; 3517 case MDIO_USXGMII_1000: 3518 state->speed = SPEED_1000; 3519 break; 3520 case MDIO_USXGMII_2500: 3521 state->speed = SPEED_2500; 3522 break; 3523 case MDIO_USXGMII_5000: 3524 state->speed = SPEED_5000; 3525 break; 3526 case MDIO_USXGMII_10G: 3527 state->speed = SPEED_10000; 3528 break; 3529 default: 3530 state->link = false; 3531 return; 3532 } 3533 3534 if (lpa & MDIO_USXGMII_FULL_DUPLEX) 3535 state->duplex = DUPLEX_FULL; 3536 else 3537 state->duplex = DUPLEX_HALF; 3538 } 3539 EXPORT_SYMBOL_GPL(phylink_decode_usxgmii_word); 3540 3541 /** 3542 * phylink_decode_usgmii_word() - decode the USGMII word from a MAC PCS 3543 * @state: a pointer to a struct phylink_link_state. 3544 * @lpa: a 16 bit value which stores the USGMII auto-negotiation word 3545 * 3546 * Helper for MAC PCS supporting the USGMII protocol and the auto-negotiation 3547 * code word. Decode the USGMII code word and populate the corresponding fields 3548 * (speed, duplex) into the phylink_link_state structure. The structure for this 3549 * word is the same as the USXGMII word, except it only supports speeds up to 3550 * 1Gbps. 3551 */ 3552 static void phylink_decode_usgmii_word(struct phylink_link_state *state, 3553 uint16_t lpa) 3554 { 3555 switch (lpa & MDIO_USXGMII_SPD_MASK) { 3556 case MDIO_USXGMII_10: 3557 state->speed = SPEED_10; 3558 break; 3559 case MDIO_USXGMII_100: 3560 state->speed = SPEED_100; 3561 break; 3562 case MDIO_USXGMII_1000: 3563 state->speed = SPEED_1000; 3564 break; 3565 default: 3566 state->link = false; 3567 return; 3568 } 3569 3570 if (lpa & MDIO_USXGMII_FULL_DUPLEX) 3571 state->duplex = DUPLEX_FULL; 3572 else 3573 state->duplex = DUPLEX_HALF; 3574 } 3575 3576 /** 3577 * phylink_mii_c22_pcs_decode_state() - Decode MAC PCS state from MII registers 3578 * @state: a pointer to a &struct phylink_link_state. 3579 * @bmsr: The value of the %MII_BMSR register 3580 * @lpa: The value of the %MII_LPA register 3581 * 3582 * Helper for MAC PCS supporting the 802.3 clause 22 register set for 3583 * clause 37 negotiation and/or SGMII control. 3584 * 3585 * Parse the Clause 37 or Cisco SGMII link partner negotiation word into 3586 * the phylink @state structure. This is suitable to be used for implementing 3587 * the pcs_get_state() member of the struct phylink_pcs_ops structure if 3588 * accessing @bmsr and @lpa cannot be done with MDIO directly. 3589 */ 3590 void phylink_mii_c22_pcs_decode_state(struct phylink_link_state *state, 3591 u16 bmsr, u16 lpa) 3592 { 3593 state->link = !!(bmsr & BMSR_LSTATUS); 3594 state->an_complete = !!(bmsr & BMSR_ANEGCOMPLETE); 3595 /* If there is no link or autonegotiation is disabled, the LP advertisement 3596 * data is not meaningful, so don't go any further. 3597 */ 3598 if (!state->link || !linkmode_test_bit(ETHTOOL_LINK_MODE_Autoneg_BIT, 3599 state->advertising)) 3600 return; 3601 3602 switch (state->interface) { 3603 case PHY_INTERFACE_MODE_1000BASEX: 3604 phylink_decode_c37_word(state, lpa, SPEED_1000); 3605 break; 3606 3607 case PHY_INTERFACE_MODE_2500BASEX: 3608 phylink_decode_c37_word(state, lpa, SPEED_2500); 3609 break; 3610 3611 case PHY_INTERFACE_MODE_SGMII: 3612 case PHY_INTERFACE_MODE_QSGMII: 3613 phylink_decode_sgmii_word(state, lpa); 3614 break; 3615 case PHY_INTERFACE_MODE_QUSGMII: 3616 phylink_decode_usgmii_word(state, lpa); 3617 break; 3618 3619 default: 3620 state->link = false; 3621 break; 3622 } 3623 } 3624 EXPORT_SYMBOL_GPL(phylink_mii_c22_pcs_decode_state); 3625 3626 /** 3627 * phylink_mii_c22_pcs_get_state() - read the MAC PCS state 3628 * @pcs: a pointer to a &struct mdio_device. 3629 * @state: a pointer to a &struct phylink_link_state. 3630 * 3631 * Helper for MAC PCS supporting the 802.3 clause 22 register set for 3632 * clause 37 negotiation and/or SGMII control. 3633 * 3634 * Read the MAC PCS state from the MII device configured in @config and 3635 * parse the Clause 37 or Cisco SGMII link partner negotiation word into 3636 * the phylink @state structure. This is suitable to be directly plugged 3637 * into the pcs_get_state() member of the struct phylink_pcs_ops 3638 * structure. 3639 */ 3640 void phylink_mii_c22_pcs_get_state(struct mdio_device *pcs, 3641 struct phylink_link_state *state) 3642 { 3643 int bmsr, lpa; 3644 3645 bmsr = mdiodev_read(pcs, MII_BMSR); 3646 lpa = mdiodev_read(pcs, MII_LPA); 3647 if (bmsr < 0 || lpa < 0) { 3648 state->link = false; 3649 return; 3650 } 3651 3652 phylink_mii_c22_pcs_decode_state(state, bmsr, lpa); 3653 } 3654 EXPORT_SYMBOL_GPL(phylink_mii_c22_pcs_get_state); 3655 3656 /** 3657 * phylink_mii_c22_pcs_encode_advertisement() - configure the clause 37 PCS 3658 * advertisement 3659 * @interface: the PHY interface mode being configured 3660 * @advertising: the ethtool advertisement mask 3661 * 3662 * Helper for MAC PCS supporting the 802.3 clause 22 register set for 3663 * clause 37 negotiation and/or SGMII control. 3664 * 3665 * Encode the clause 37 PCS advertisement as specified by @interface and 3666 * @advertising. 3667 * 3668 * Return: The new value for @adv, or ``-EINVAL`` if it should not be changed. 3669 */ 3670 int phylink_mii_c22_pcs_encode_advertisement(phy_interface_t interface, 3671 const unsigned long *advertising) 3672 { 3673 u16 adv; 3674 3675 switch (interface) { 3676 case PHY_INTERFACE_MODE_1000BASEX: 3677 case PHY_INTERFACE_MODE_2500BASEX: 3678 adv = ADVERTISE_1000XFULL; 3679 if (linkmode_test_bit(ETHTOOL_LINK_MODE_Pause_BIT, 3680 advertising)) 3681 adv |= ADVERTISE_1000XPAUSE; 3682 if (linkmode_test_bit(ETHTOOL_LINK_MODE_Asym_Pause_BIT, 3683 advertising)) 3684 adv |= ADVERTISE_1000XPSE_ASYM; 3685 return adv; 3686 case PHY_INTERFACE_MODE_SGMII: 3687 case PHY_INTERFACE_MODE_QSGMII: 3688 return 0x0001; 3689 default: 3690 /* Nothing to do for other modes */ 3691 return -EINVAL; 3692 } 3693 } 3694 EXPORT_SYMBOL_GPL(phylink_mii_c22_pcs_encode_advertisement); 3695 3696 /** 3697 * phylink_mii_c22_pcs_config() - configure clause 22 PCS 3698 * @pcs: a pointer to a &struct mdio_device. 3699 * @interface: the PHY interface mode being configured 3700 * @advertising: the ethtool advertisement mask 3701 * @neg_mode: PCS negotiation mode 3702 * 3703 * Configure a Clause 22 PCS PHY with the appropriate negotiation 3704 * parameters for the @mode, @interface and @advertising parameters. 3705 * Returns negative error number on failure, zero if the advertisement 3706 * has not changed, or positive if there is a change. 3707 */ 3708 int phylink_mii_c22_pcs_config(struct mdio_device *pcs, 3709 phy_interface_t interface, 3710 const unsigned long *advertising, 3711 unsigned int neg_mode) 3712 { 3713 bool changed = 0; 3714 u16 bmcr; 3715 int ret, adv; 3716 3717 adv = phylink_mii_c22_pcs_encode_advertisement(interface, advertising); 3718 if (adv >= 0) { 3719 ret = mdiobus_modify_changed(pcs->bus, pcs->addr, 3720 MII_ADVERTISE, 0xffff, adv); 3721 if (ret < 0) 3722 return ret; 3723 changed = ret; 3724 } 3725 3726 if (neg_mode == PHYLINK_PCS_NEG_INBAND_ENABLED) 3727 bmcr = BMCR_ANENABLE; 3728 else 3729 bmcr = 0; 3730 3731 /* Configure the inband state. Ensure ISOLATE bit is disabled */ 3732 ret = mdiodev_modify(pcs, MII_BMCR, BMCR_ANENABLE | BMCR_ISOLATE, bmcr); 3733 if (ret < 0) 3734 return ret; 3735 3736 return changed; 3737 } 3738 EXPORT_SYMBOL_GPL(phylink_mii_c22_pcs_config); 3739 3740 /** 3741 * phylink_mii_c22_pcs_an_restart() - restart 802.3z autonegotiation 3742 * @pcs: a pointer to a &struct mdio_device. 3743 * 3744 * Helper for MAC PCS supporting the 802.3 clause 22 register set for 3745 * clause 37 negotiation. 3746 * 3747 * Restart the clause 37 negotiation with the link partner. This is 3748 * suitable to be directly plugged into the pcs_get_state() member 3749 * of the struct phylink_pcs_ops structure. 3750 */ 3751 void phylink_mii_c22_pcs_an_restart(struct mdio_device *pcs) 3752 { 3753 int val = mdiodev_read(pcs, MII_BMCR); 3754 3755 if (val >= 0) { 3756 val |= BMCR_ANRESTART; 3757 3758 mdiodev_write(pcs, MII_BMCR, val); 3759 } 3760 } 3761 EXPORT_SYMBOL_GPL(phylink_mii_c22_pcs_an_restart); 3762 3763 void phylink_mii_c45_pcs_get_state(struct mdio_device *pcs, 3764 struct phylink_link_state *state) 3765 { 3766 struct mii_bus *bus = pcs->bus; 3767 int addr = pcs->addr; 3768 int stat; 3769 3770 stat = mdiobus_c45_read(bus, addr, MDIO_MMD_PCS, MDIO_STAT1); 3771 if (stat < 0) { 3772 state->link = false; 3773 return; 3774 } 3775 3776 state->link = !!(stat & MDIO_STAT1_LSTATUS); 3777 if (!state->link) 3778 return; 3779 3780 switch (state->interface) { 3781 case PHY_INTERFACE_MODE_10GBASER: 3782 state->speed = SPEED_10000; 3783 state->duplex = DUPLEX_FULL; 3784 break; 3785 3786 default: 3787 break; 3788 } 3789 } 3790 EXPORT_SYMBOL_GPL(phylink_mii_c45_pcs_get_state); 3791 3792 static int __init phylink_init(void) 3793 { 3794 for (int i = 0; i < ARRAY_SIZE(phylink_sfp_interface_preference); ++i) 3795 __set_bit(phylink_sfp_interface_preference[i], 3796 phylink_sfp_interfaces); 3797 3798 return 0; 3799 } 3800 3801 module_init(phylink_init); 3802 3803 MODULE_LICENSE("GPL v2"); 3804 MODULE_DESCRIPTION("phylink models the MAC to optional PHY connection"); 3805