1 /* Framework for finding and configuring PHYs. 2 * Also contains generic PHY driver 3 * 4 * Author: Andy Fleming 5 * 6 * Copyright (c) 2004 Freescale Semiconductor, Inc. 7 * 8 * This program is free software; you can redistribute it and/or modify it 9 * under the terms of the GNU General Public License as published by the 10 * Free Software Foundation; either version 2 of the License, or (at your 11 * option) any later version. 12 * 13 */ 14 15 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt 16 17 #include <linux/kernel.h> 18 #include <linux/string.h> 19 #include <linux/errno.h> 20 #include <linux/unistd.h> 21 #include <linux/slab.h> 22 #include <linux/interrupt.h> 23 #include <linux/init.h> 24 #include <linux/delay.h> 25 #include <linux/netdevice.h> 26 #include <linux/etherdevice.h> 27 #include <linux/skbuff.h> 28 #include <linux/mm.h> 29 #include <linux/module.h> 30 #include <linux/mii.h> 31 #include <linux/ethtool.h> 32 #include <linux/phy.h> 33 #include <linux/mdio.h> 34 #include <linux/io.h> 35 #include <linux/uaccess.h> 36 #include <linux/of.h> 37 38 #include <asm/irq.h> 39 40 MODULE_DESCRIPTION("PHY library"); 41 MODULE_AUTHOR("Andy Fleming"); 42 MODULE_LICENSE("GPL"); 43 44 void phy_device_free(struct phy_device *phydev) 45 { 46 put_device(&phydev->mdio.dev); 47 } 48 EXPORT_SYMBOL(phy_device_free); 49 50 static void phy_mdio_device_free(struct mdio_device *mdiodev) 51 { 52 struct phy_device *phydev; 53 54 phydev = container_of(mdiodev, struct phy_device, mdio); 55 phy_device_free(phydev); 56 } 57 58 static void phy_device_release(struct device *dev) 59 { 60 kfree(to_phy_device(dev)); 61 } 62 63 static void phy_mdio_device_remove(struct mdio_device *mdiodev) 64 { 65 struct phy_device *phydev; 66 67 phydev = container_of(mdiodev, struct phy_device, mdio); 68 phy_device_remove(phydev); 69 } 70 71 enum genphy_driver { 72 GENPHY_DRV_1G, 73 GENPHY_DRV_10G, 74 GENPHY_DRV_MAX 75 }; 76 77 static struct phy_driver genphy_driver[GENPHY_DRV_MAX]; 78 79 static LIST_HEAD(phy_fixup_list); 80 static DEFINE_MUTEX(phy_fixup_lock); 81 82 #ifdef CONFIG_PM 83 static bool mdio_bus_phy_may_suspend(struct phy_device *phydev) 84 { 85 struct device_driver *drv = phydev->mdio.dev.driver; 86 struct phy_driver *phydrv = to_phy_driver(drv); 87 struct net_device *netdev = phydev->attached_dev; 88 89 if (!drv || !phydrv->suspend) 90 return false; 91 92 /* PHY not attached? May suspend if the PHY has not already been 93 * suspended as part of a prior call to phy_disconnect() -> 94 * phy_detach() -> phy_suspend() because the parent netdev might be the 95 * MDIO bus driver and clock gated at this point. 96 */ 97 if (!netdev) 98 return !phydev->suspended; 99 100 /* Don't suspend PHY if the attached netdev parent may wakeup. 101 * The parent may point to a PCI device, as in tg3 driver. 102 */ 103 if (netdev->dev.parent && device_may_wakeup(netdev->dev.parent)) 104 return false; 105 106 /* Also don't suspend PHY if the netdev itself may wakeup. This 107 * is the case for devices w/o underlaying pwr. mgmt. aware bus, 108 * e.g. SoC devices. 109 */ 110 if (device_may_wakeup(&netdev->dev)) 111 return false; 112 113 return true; 114 } 115 116 static int mdio_bus_phy_suspend(struct device *dev) 117 { 118 struct phy_device *phydev = to_phy_device(dev); 119 120 /* We must stop the state machine manually, otherwise it stops out of 121 * control, possibly with the phydev->lock held. Upon resume, netdev 122 * may call phy routines that try to grab the same lock, and that may 123 * lead to a deadlock. 124 */ 125 if (phydev->attached_dev && phydev->adjust_link) 126 phy_stop_machine(phydev); 127 128 if (!mdio_bus_phy_may_suspend(phydev)) 129 return 0; 130 131 return phy_suspend(phydev); 132 } 133 134 static int mdio_bus_phy_resume(struct device *dev) 135 { 136 struct phy_device *phydev = to_phy_device(dev); 137 int ret; 138 139 if (!mdio_bus_phy_may_suspend(phydev)) 140 goto no_resume; 141 142 ret = phy_resume(phydev); 143 if (ret < 0) 144 return ret; 145 146 no_resume: 147 if (phydev->attached_dev && phydev->adjust_link) 148 phy_start_machine(phydev); 149 150 return 0; 151 } 152 153 static int mdio_bus_phy_restore(struct device *dev) 154 { 155 struct phy_device *phydev = to_phy_device(dev); 156 struct net_device *netdev = phydev->attached_dev; 157 int ret; 158 159 if (!netdev) 160 return 0; 161 162 ret = phy_init_hw(phydev); 163 if (ret < 0) 164 return ret; 165 166 /* The PHY needs to renegotiate. */ 167 phydev->link = 0; 168 phydev->state = PHY_UP; 169 170 phy_start_machine(phydev); 171 172 return 0; 173 } 174 175 static const struct dev_pm_ops mdio_bus_phy_pm_ops = { 176 .suspend = mdio_bus_phy_suspend, 177 .resume = mdio_bus_phy_resume, 178 .freeze = mdio_bus_phy_suspend, 179 .thaw = mdio_bus_phy_resume, 180 .restore = mdio_bus_phy_restore, 181 }; 182 183 #define MDIO_BUS_PHY_PM_OPS (&mdio_bus_phy_pm_ops) 184 185 #else 186 187 #define MDIO_BUS_PHY_PM_OPS NULL 188 189 #endif /* CONFIG_PM */ 190 191 /** 192 * phy_register_fixup - creates a new phy_fixup and adds it to the list 193 * @bus_id: A string which matches phydev->mdio.dev.bus_id (or PHY_ANY_ID) 194 * @phy_uid: Used to match against phydev->phy_id (the UID of the PHY) 195 * It can also be PHY_ANY_UID 196 * @phy_uid_mask: Applied to phydev->phy_id and fixup->phy_uid before 197 * comparison 198 * @run: The actual code to be run when a matching PHY is found 199 */ 200 int phy_register_fixup(const char *bus_id, u32 phy_uid, u32 phy_uid_mask, 201 int (*run)(struct phy_device *)) 202 { 203 struct phy_fixup *fixup = kzalloc(sizeof(*fixup), GFP_KERNEL); 204 205 if (!fixup) 206 return -ENOMEM; 207 208 strlcpy(fixup->bus_id, bus_id, sizeof(fixup->bus_id)); 209 fixup->phy_uid = phy_uid; 210 fixup->phy_uid_mask = phy_uid_mask; 211 fixup->run = run; 212 213 mutex_lock(&phy_fixup_lock); 214 list_add_tail(&fixup->list, &phy_fixup_list); 215 mutex_unlock(&phy_fixup_lock); 216 217 return 0; 218 } 219 EXPORT_SYMBOL(phy_register_fixup); 220 221 /* Registers a fixup to be run on any PHY with the UID in phy_uid */ 222 int phy_register_fixup_for_uid(u32 phy_uid, u32 phy_uid_mask, 223 int (*run)(struct phy_device *)) 224 { 225 return phy_register_fixup(PHY_ANY_ID, phy_uid, phy_uid_mask, run); 226 } 227 EXPORT_SYMBOL(phy_register_fixup_for_uid); 228 229 /* Registers a fixup to be run on the PHY with id string bus_id */ 230 int phy_register_fixup_for_id(const char *bus_id, 231 int (*run)(struct phy_device *)) 232 { 233 return phy_register_fixup(bus_id, PHY_ANY_UID, 0xffffffff, run); 234 } 235 EXPORT_SYMBOL(phy_register_fixup_for_id); 236 237 /* Returns 1 if fixup matches phydev in bus_id and phy_uid. 238 * Fixups can be set to match any in one or more fields. 239 */ 240 static int phy_needs_fixup(struct phy_device *phydev, struct phy_fixup *fixup) 241 { 242 if (strcmp(fixup->bus_id, phydev_name(phydev)) != 0) 243 if (strcmp(fixup->bus_id, PHY_ANY_ID) != 0) 244 return 0; 245 246 if ((fixup->phy_uid & fixup->phy_uid_mask) != 247 (phydev->phy_id & fixup->phy_uid_mask)) 248 if (fixup->phy_uid != PHY_ANY_UID) 249 return 0; 250 251 return 1; 252 } 253 254 /* Runs any matching fixups for this phydev */ 255 static int phy_scan_fixups(struct phy_device *phydev) 256 { 257 struct phy_fixup *fixup; 258 259 mutex_lock(&phy_fixup_lock); 260 list_for_each_entry(fixup, &phy_fixup_list, list) { 261 if (phy_needs_fixup(phydev, fixup)) { 262 int err = fixup->run(phydev); 263 264 if (err < 0) { 265 mutex_unlock(&phy_fixup_lock); 266 return err; 267 } 268 phydev->has_fixups = true; 269 } 270 } 271 mutex_unlock(&phy_fixup_lock); 272 273 return 0; 274 } 275 276 static int phy_bus_match(struct device *dev, struct device_driver *drv) 277 { 278 struct phy_device *phydev = to_phy_device(dev); 279 struct phy_driver *phydrv = to_phy_driver(drv); 280 const int num_ids = ARRAY_SIZE(phydev->c45_ids.device_ids); 281 int i; 282 283 if (!(phydrv->mdiodrv.flags & MDIO_DEVICE_IS_PHY)) 284 return 0; 285 286 if (phydrv->match_phy_device) 287 return phydrv->match_phy_device(phydev); 288 289 if (phydev->is_c45) { 290 for (i = 1; i < num_ids; i++) { 291 if (!(phydev->c45_ids.devices_in_package & (1 << i))) 292 continue; 293 294 if ((phydrv->phy_id & phydrv->phy_id_mask) == 295 (phydev->c45_ids.device_ids[i] & 296 phydrv->phy_id_mask)) 297 return 1; 298 } 299 return 0; 300 } else { 301 return (phydrv->phy_id & phydrv->phy_id_mask) == 302 (phydev->phy_id & phydrv->phy_id_mask); 303 } 304 } 305 306 struct phy_device *phy_device_create(struct mii_bus *bus, int addr, int phy_id, 307 bool is_c45, 308 struct phy_c45_device_ids *c45_ids) 309 { 310 struct phy_device *dev; 311 struct mdio_device *mdiodev; 312 313 /* We allocate the device, and initialize the default values */ 314 dev = kzalloc(sizeof(*dev), GFP_KERNEL); 315 if (!dev) 316 return ERR_PTR(-ENOMEM); 317 318 mdiodev = &dev->mdio; 319 mdiodev->dev.release = phy_device_release; 320 mdiodev->dev.parent = &bus->dev; 321 mdiodev->dev.bus = &mdio_bus_type; 322 mdiodev->bus = bus; 323 mdiodev->pm_ops = MDIO_BUS_PHY_PM_OPS; 324 mdiodev->bus_match = phy_bus_match; 325 mdiodev->addr = addr; 326 mdiodev->flags = MDIO_DEVICE_FLAG_PHY; 327 mdiodev->device_free = phy_mdio_device_free; 328 mdiodev->device_remove = phy_mdio_device_remove; 329 330 dev->speed = 0; 331 dev->duplex = -1; 332 dev->pause = 0; 333 dev->asym_pause = 0; 334 dev->link = 1; 335 dev->interface = PHY_INTERFACE_MODE_GMII; 336 337 dev->autoneg = AUTONEG_ENABLE; 338 339 dev->is_c45 = is_c45; 340 dev->phy_id = phy_id; 341 if (c45_ids) 342 dev->c45_ids = *c45_ids; 343 dev->irq = bus->irq[addr]; 344 dev_set_name(&mdiodev->dev, PHY_ID_FMT, bus->id, addr); 345 346 dev->state = PHY_DOWN; 347 348 mutex_init(&dev->lock); 349 INIT_DELAYED_WORK(&dev->state_queue, phy_state_machine); 350 INIT_WORK(&dev->phy_queue, phy_change); 351 352 /* Request the appropriate module unconditionally; don't 353 * bother trying to do so only if it isn't already loaded, 354 * because that gets complicated. A hotplug event would have 355 * done an unconditional modprobe anyway. 356 * We don't do normal hotplug because it won't work for MDIO 357 * -- because it relies on the device staying around for long 358 * enough for the driver to get loaded. With MDIO, the NIC 359 * driver will get bored and give up as soon as it finds that 360 * there's no driver _already_ loaded. 361 */ 362 request_module(MDIO_MODULE_PREFIX MDIO_ID_FMT, MDIO_ID_ARGS(phy_id)); 363 364 device_initialize(&mdiodev->dev); 365 366 return dev; 367 } 368 EXPORT_SYMBOL(phy_device_create); 369 370 /* get_phy_c45_devs_in_pkg - reads a MMD's devices in package registers. 371 * @bus: the target MII bus 372 * @addr: PHY address on the MII bus 373 * @dev_addr: MMD address in the PHY. 374 * @devices_in_package: where to store the devices in package information. 375 * 376 * Description: reads devices in package registers of a MMD at @dev_addr 377 * from PHY at @addr on @bus. 378 * 379 * Returns: 0 on success, -EIO on failure. 380 */ 381 static int get_phy_c45_devs_in_pkg(struct mii_bus *bus, int addr, int dev_addr, 382 u32 *devices_in_package) 383 { 384 int phy_reg, reg_addr; 385 386 reg_addr = MII_ADDR_C45 | dev_addr << 16 | MDIO_DEVS2; 387 phy_reg = mdiobus_read(bus, addr, reg_addr); 388 if (phy_reg < 0) 389 return -EIO; 390 *devices_in_package = (phy_reg & 0xffff) << 16; 391 392 reg_addr = MII_ADDR_C45 | dev_addr << 16 | MDIO_DEVS1; 393 phy_reg = mdiobus_read(bus, addr, reg_addr); 394 if (phy_reg < 0) 395 return -EIO; 396 *devices_in_package |= (phy_reg & 0xffff); 397 398 return 0; 399 } 400 401 /** 402 * get_phy_c45_ids - reads the specified addr for its 802.3-c45 IDs. 403 * @bus: the target MII bus 404 * @addr: PHY address on the MII bus 405 * @phy_id: where to store the ID retrieved. 406 * @c45_ids: where to store the c45 ID information. 407 * 408 * If the PHY devices-in-package appears to be valid, it and the 409 * corresponding identifiers are stored in @c45_ids, zero is stored 410 * in @phy_id. Otherwise 0xffffffff is stored in @phy_id. Returns 411 * zero on success. 412 * 413 */ 414 static int get_phy_c45_ids(struct mii_bus *bus, int addr, u32 *phy_id, 415 struct phy_c45_device_ids *c45_ids) { 416 int phy_reg; 417 int i, reg_addr; 418 const int num_ids = ARRAY_SIZE(c45_ids->device_ids); 419 u32 *devs = &c45_ids->devices_in_package; 420 421 /* Find first non-zero Devices In package. Device zero is reserved 422 * for 802.3 c45 complied PHYs, so don't probe it at first. 423 */ 424 for (i = 1; i < num_ids && *devs == 0; i++) { 425 phy_reg = get_phy_c45_devs_in_pkg(bus, addr, i, devs); 426 if (phy_reg < 0) 427 return -EIO; 428 429 if ((*devs & 0x1fffffff) == 0x1fffffff) { 430 /* If mostly Fs, there is no device there, 431 * then let's continue to probe more, as some 432 * 10G PHYs have zero Devices In package, 433 * e.g. Cortina CS4315/CS4340 PHY. 434 */ 435 phy_reg = get_phy_c45_devs_in_pkg(bus, addr, 0, devs); 436 if (phy_reg < 0) 437 return -EIO; 438 /* no device there, let's get out of here */ 439 if ((*devs & 0x1fffffff) == 0x1fffffff) { 440 *phy_id = 0xffffffff; 441 return 0; 442 } else { 443 break; 444 } 445 } 446 } 447 448 /* Now probe Device Identifiers for each device present. */ 449 for (i = 1; i < num_ids; i++) { 450 if (!(c45_ids->devices_in_package & (1 << i))) 451 continue; 452 453 reg_addr = MII_ADDR_C45 | i << 16 | MII_PHYSID1; 454 phy_reg = mdiobus_read(bus, addr, reg_addr); 455 if (phy_reg < 0) 456 return -EIO; 457 c45_ids->device_ids[i] = (phy_reg & 0xffff) << 16; 458 459 reg_addr = MII_ADDR_C45 | i << 16 | MII_PHYSID2; 460 phy_reg = mdiobus_read(bus, addr, reg_addr); 461 if (phy_reg < 0) 462 return -EIO; 463 c45_ids->device_ids[i] |= (phy_reg & 0xffff); 464 } 465 *phy_id = 0; 466 return 0; 467 } 468 469 /** 470 * get_phy_id - reads the specified addr for its ID. 471 * @bus: the target MII bus 472 * @addr: PHY address on the MII bus 473 * @phy_id: where to store the ID retrieved. 474 * @is_c45: If true the PHY uses the 802.3 clause 45 protocol 475 * @c45_ids: where to store the c45 ID information. 476 * 477 * Description: In the case of a 802.3-c22 PHY, reads the ID registers 478 * of the PHY at @addr on the @bus, stores it in @phy_id and returns 479 * zero on success. 480 * 481 * In the case of a 802.3-c45 PHY, get_phy_c45_ids() is invoked, and 482 * its return value is in turn returned. 483 * 484 */ 485 static int get_phy_id(struct mii_bus *bus, int addr, u32 *phy_id, 486 bool is_c45, struct phy_c45_device_ids *c45_ids) 487 { 488 int phy_reg; 489 490 if (is_c45) 491 return get_phy_c45_ids(bus, addr, phy_id, c45_ids); 492 493 /* Grab the bits from PHYIR1, and put them in the upper half */ 494 phy_reg = mdiobus_read(bus, addr, MII_PHYSID1); 495 if (phy_reg < 0) 496 return -EIO; 497 498 *phy_id = (phy_reg & 0xffff) << 16; 499 500 /* Grab the bits from PHYIR2, and put them in the lower half */ 501 phy_reg = mdiobus_read(bus, addr, MII_PHYSID2); 502 if (phy_reg < 0) 503 return -EIO; 504 505 *phy_id |= (phy_reg & 0xffff); 506 507 return 0; 508 } 509 510 /** 511 * get_phy_device - reads the specified PHY device and returns its @phy_device 512 * struct 513 * @bus: the target MII bus 514 * @addr: PHY address on the MII bus 515 * @is_c45: If true the PHY uses the 802.3 clause 45 protocol 516 * 517 * Description: Reads the ID registers of the PHY at @addr on the 518 * @bus, then allocates and returns the phy_device to represent it. 519 */ 520 struct phy_device *get_phy_device(struct mii_bus *bus, int addr, bool is_c45) 521 { 522 struct phy_c45_device_ids c45_ids = {0}; 523 u32 phy_id = 0; 524 int r; 525 526 r = get_phy_id(bus, addr, &phy_id, is_c45, &c45_ids); 527 if (r) 528 return ERR_PTR(r); 529 530 /* If the phy_id is mostly Fs, there is no device there */ 531 if ((phy_id & 0x1fffffff) == 0x1fffffff) 532 return ERR_PTR(-ENODEV); 533 534 return phy_device_create(bus, addr, phy_id, is_c45, &c45_ids); 535 } 536 EXPORT_SYMBOL(get_phy_device); 537 538 static ssize_t 539 phy_id_show(struct device *dev, struct device_attribute *attr, char *buf) 540 { 541 struct phy_device *phydev = to_phy_device(dev); 542 543 return sprintf(buf, "0x%.8lx\n", (unsigned long)phydev->phy_id); 544 } 545 static DEVICE_ATTR_RO(phy_id); 546 547 static ssize_t 548 phy_interface_show(struct device *dev, struct device_attribute *attr, char *buf) 549 { 550 struct phy_device *phydev = to_phy_device(dev); 551 const char *mode = NULL; 552 553 if (phy_is_internal(phydev)) 554 mode = "internal"; 555 else 556 mode = phy_modes(phydev->interface); 557 558 return sprintf(buf, "%s\n", mode); 559 } 560 static DEVICE_ATTR_RO(phy_interface); 561 562 static ssize_t 563 phy_has_fixups_show(struct device *dev, struct device_attribute *attr, 564 char *buf) 565 { 566 struct phy_device *phydev = to_phy_device(dev); 567 568 return sprintf(buf, "%d\n", phydev->has_fixups); 569 } 570 static DEVICE_ATTR_RO(phy_has_fixups); 571 572 static struct attribute *phy_dev_attrs[] = { 573 &dev_attr_phy_id.attr, 574 &dev_attr_phy_interface.attr, 575 &dev_attr_phy_has_fixups.attr, 576 NULL, 577 }; 578 ATTRIBUTE_GROUPS(phy_dev); 579 580 /** 581 * phy_device_register - Register the phy device on the MDIO bus 582 * @phydev: phy_device structure to be added to the MDIO bus 583 */ 584 int phy_device_register(struct phy_device *phydev) 585 { 586 int err; 587 588 err = mdiobus_register_device(&phydev->mdio); 589 if (err) 590 return err; 591 592 /* Run all of the fixups for this PHY */ 593 err = phy_scan_fixups(phydev); 594 if (err) { 595 pr_err("PHY %d failed to initialize\n", phydev->mdio.addr); 596 goto out; 597 } 598 599 phydev->mdio.dev.groups = phy_dev_groups; 600 601 err = device_add(&phydev->mdio.dev); 602 if (err) { 603 pr_err("PHY %d failed to add\n", phydev->mdio.addr); 604 goto out; 605 } 606 607 return 0; 608 609 out: 610 mdiobus_unregister_device(&phydev->mdio); 611 return err; 612 } 613 EXPORT_SYMBOL(phy_device_register); 614 615 /** 616 * phy_device_remove - Remove a previously registered phy device from the MDIO bus 617 * @phydev: phy_device structure to remove 618 * 619 * This doesn't free the phy_device itself, it merely reverses the effects 620 * of phy_device_register(). Use phy_device_free() to free the device 621 * after calling this function. 622 */ 623 void phy_device_remove(struct phy_device *phydev) 624 { 625 device_del(&phydev->mdio.dev); 626 mdiobus_unregister_device(&phydev->mdio); 627 } 628 EXPORT_SYMBOL(phy_device_remove); 629 630 /** 631 * phy_find_first - finds the first PHY device on the bus 632 * @bus: the target MII bus 633 */ 634 struct phy_device *phy_find_first(struct mii_bus *bus) 635 { 636 struct phy_device *phydev; 637 int addr; 638 639 for (addr = 0; addr < PHY_MAX_ADDR; addr++) { 640 phydev = mdiobus_get_phy(bus, addr); 641 if (phydev) 642 return phydev; 643 } 644 return NULL; 645 } 646 EXPORT_SYMBOL(phy_find_first); 647 648 /** 649 * phy_prepare_link - prepares the PHY layer to monitor link status 650 * @phydev: target phy_device struct 651 * @handler: callback function for link status change notifications 652 * 653 * Description: Tells the PHY infrastructure to handle the 654 * gory details on monitoring link status (whether through 655 * polling or an interrupt), and to call back to the 656 * connected device driver when the link status changes. 657 * If you want to monitor your own link state, don't call 658 * this function. 659 */ 660 static void phy_prepare_link(struct phy_device *phydev, 661 void (*handler)(struct net_device *)) 662 { 663 phydev->adjust_link = handler; 664 } 665 666 /** 667 * phy_connect_direct - connect an ethernet device to a specific phy_device 668 * @dev: the network device to connect 669 * @phydev: the pointer to the phy device 670 * @handler: callback function for state change notifications 671 * @interface: PHY device's interface 672 */ 673 int phy_connect_direct(struct net_device *dev, struct phy_device *phydev, 674 void (*handler)(struct net_device *), 675 phy_interface_t interface) 676 { 677 int rc; 678 679 rc = phy_attach_direct(dev, phydev, phydev->dev_flags, interface); 680 if (rc) 681 return rc; 682 683 phy_prepare_link(phydev, handler); 684 phy_start_machine(phydev); 685 if (phydev->irq > 0) 686 phy_start_interrupts(phydev); 687 688 return 0; 689 } 690 EXPORT_SYMBOL(phy_connect_direct); 691 692 /** 693 * phy_connect - connect an ethernet device to a PHY device 694 * @dev: the network device to connect 695 * @bus_id: the id string of the PHY device to connect 696 * @handler: callback function for state change notifications 697 * @interface: PHY device's interface 698 * 699 * Description: Convenience function for connecting ethernet 700 * devices to PHY devices. The default behavior is for 701 * the PHY infrastructure to handle everything, and only notify 702 * the connected driver when the link status changes. If you 703 * don't want, or can't use the provided functionality, you may 704 * choose to call only the subset of functions which provide 705 * the desired functionality. 706 */ 707 struct phy_device *phy_connect(struct net_device *dev, const char *bus_id, 708 void (*handler)(struct net_device *), 709 phy_interface_t interface) 710 { 711 struct phy_device *phydev; 712 struct device *d; 713 int rc; 714 715 /* Search the list of PHY devices on the mdio bus for the 716 * PHY with the requested name 717 */ 718 d = bus_find_device_by_name(&mdio_bus_type, NULL, bus_id); 719 if (!d) { 720 pr_err("PHY %s not found\n", bus_id); 721 return ERR_PTR(-ENODEV); 722 } 723 phydev = to_phy_device(d); 724 725 rc = phy_connect_direct(dev, phydev, handler, interface); 726 put_device(d); 727 if (rc) 728 return ERR_PTR(rc); 729 730 return phydev; 731 } 732 EXPORT_SYMBOL(phy_connect); 733 734 /** 735 * phy_disconnect - disable interrupts, stop state machine, and detach a PHY 736 * device 737 * @phydev: target phy_device struct 738 */ 739 void phy_disconnect(struct phy_device *phydev) 740 { 741 if (phydev->irq > 0) 742 phy_stop_interrupts(phydev); 743 744 phy_stop_machine(phydev); 745 746 phydev->adjust_link = NULL; 747 748 phy_detach(phydev); 749 } 750 EXPORT_SYMBOL(phy_disconnect); 751 752 /** 753 * phy_poll_reset - Safely wait until a PHY reset has properly completed 754 * @phydev: The PHY device to poll 755 * 756 * Description: According to IEEE 802.3, Section 2, Subsection 22.2.4.1.1, as 757 * published in 2008, a PHY reset may take up to 0.5 seconds. The MII BMCR 758 * register must be polled until the BMCR_RESET bit clears. 759 * 760 * Furthermore, any attempts to write to PHY registers may have no effect 761 * or even generate MDIO bus errors until this is complete. 762 * 763 * Some PHYs (such as the Marvell 88E1111) don't entirely conform to the 764 * standard and do not fully reset after the BMCR_RESET bit is set, and may 765 * even *REQUIRE* a soft-reset to properly restart autonegotiation. In an 766 * effort to support such broken PHYs, this function is separate from the 767 * standard phy_init_hw() which will zero all the other bits in the BMCR 768 * and reapply all driver-specific and board-specific fixups. 769 */ 770 static int phy_poll_reset(struct phy_device *phydev) 771 { 772 /* Poll until the reset bit clears (50ms per retry == 0.6 sec) */ 773 unsigned int retries = 12; 774 int ret; 775 776 do { 777 msleep(50); 778 ret = phy_read(phydev, MII_BMCR); 779 if (ret < 0) 780 return ret; 781 } while (ret & BMCR_RESET && --retries); 782 if (ret & BMCR_RESET) 783 return -ETIMEDOUT; 784 785 /* Some chips (smsc911x) may still need up to another 1ms after the 786 * BMCR_RESET bit is cleared before they are usable. 787 */ 788 msleep(1); 789 return 0; 790 } 791 792 int phy_init_hw(struct phy_device *phydev) 793 { 794 int ret = 0; 795 796 if (!phydev->drv || !phydev->drv->config_init) 797 return 0; 798 799 if (phydev->drv->soft_reset) 800 ret = phydev->drv->soft_reset(phydev); 801 else 802 ret = genphy_soft_reset(phydev); 803 804 if (ret < 0) 805 return ret; 806 807 ret = phy_scan_fixups(phydev); 808 if (ret < 0) 809 return ret; 810 811 return phydev->drv->config_init(phydev); 812 } 813 EXPORT_SYMBOL(phy_init_hw); 814 815 void phy_attached_info(struct phy_device *phydev) 816 { 817 phy_attached_print(phydev, NULL); 818 } 819 EXPORT_SYMBOL(phy_attached_info); 820 821 #define ATTACHED_FMT "attached PHY driver [%s] (mii_bus:phy_addr=%s, irq=%d)" 822 void phy_attached_print(struct phy_device *phydev, const char *fmt, ...) 823 { 824 if (!fmt) { 825 dev_info(&phydev->mdio.dev, ATTACHED_FMT "\n", 826 phydev->drv->name, phydev_name(phydev), 827 phydev->irq); 828 } else { 829 va_list ap; 830 831 dev_info(&phydev->mdio.dev, ATTACHED_FMT, 832 phydev->drv->name, phydev_name(phydev), 833 phydev->irq); 834 835 va_start(ap, fmt); 836 vprintk(fmt, ap); 837 va_end(ap); 838 } 839 } 840 EXPORT_SYMBOL(phy_attached_print); 841 842 /** 843 * phy_attach_direct - attach a network device to a given PHY device pointer 844 * @dev: network device to attach 845 * @phydev: Pointer to phy_device to attach 846 * @flags: PHY device's dev_flags 847 * @interface: PHY device's interface 848 * 849 * Description: Called by drivers to attach to a particular PHY 850 * device. The phy_device is found, and properly hooked up 851 * to the phy_driver. If no driver is attached, then a 852 * generic driver is used. The phy_device is given a ptr to 853 * the attaching device, and given a callback for link status 854 * change. The phy_device is returned to the attaching driver. 855 * This function takes a reference on the phy device. 856 */ 857 int phy_attach_direct(struct net_device *dev, struct phy_device *phydev, 858 u32 flags, phy_interface_t interface) 859 { 860 struct mii_bus *bus = phydev->mdio.bus; 861 struct device *d = &phydev->mdio.dev; 862 int err; 863 864 if (!try_module_get(bus->owner)) { 865 dev_err(&dev->dev, "failed to get the bus module\n"); 866 return -EIO; 867 } 868 869 get_device(d); 870 871 /* Assume that if there is no driver, that it doesn't 872 * exist, and we should use the genphy driver. 873 */ 874 if (!d->driver) { 875 if (phydev->is_c45) 876 d->driver = 877 &genphy_driver[GENPHY_DRV_10G].mdiodrv.driver; 878 else 879 d->driver = 880 &genphy_driver[GENPHY_DRV_1G].mdiodrv.driver; 881 882 err = d->driver->probe(d); 883 if (err >= 0) 884 err = device_bind_driver(d); 885 886 if (err) 887 goto error; 888 } 889 890 if (phydev->attached_dev) { 891 dev_err(&dev->dev, "PHY already attached\n"); 892 err = -EBUSY; 893 goto error; 894 } 895 896 phydev->attached_dev = dev; 897 dev->phydev = phydev; 898 899 phydev->dev_flags = flags; 900 901 phydev->interface = interface; 902 903 phydev->state = PHY_READY; 904 905 /* Initial carrier state is off as the phy is about to be 906 * (re)initialized. 907 */ 908 netif_carrier_off(phydev->attached_dev); 909 910 /* Do initial configuration here, now that 911 * we have certain key parameters 912 * (dev_flags and interface) 913 */ 914 err = phy_init_hw(phydev); 915 if (err) 916 phy_detach(phydev); 917 else 918 phy_resume(phydev); 919 920 return err; 921 922 error: 923 put_device(d); 924 module_put(bus->owner); 925 return err; 926 } 927 EXPORT_SYMBOL(phy_attach_direct); 928 929 /** 930 * phy_attach - attach a network device to a particular PHY device 931 * @dev: network device to attach 932 * @bus_id: Bus ID of PHY device to attach 933 * @interface: PHY device's interface 934 * 935 * Description: Same as phy_attach_direct() except that a PHY bus_id 936 * string is passed instead of a pointer to a struct phy_device. 937 */ 938 struct phy_device *phy_attach(struct net_device *dev, const char *bus_id, 939 phy_interface_t interface) 940 { 941 struct bus_type *bus = &mdio_bus_type; 942 struct phy_device *phydev; 943 struct device *d; 944 int rc; 945 946 /* Search the list of PHY devices on the mdio bus for the 947 * PHY with the requested name 948 */ 949 d = bus_find_device_by_name(bus, NULL, bus_id); 950 if (!d) { 951 pr_err("PHY %s not found\n", bus_id); 952 return ERR_PTR(-ENODEV); 953 } 954 phydev = to_phy_device(d); 955 956 rc = phy_attach_direct(dev, phydev, phydev->dev_flags, interface); 957 put_device(d); 958 if (rc) 959 return ERR_PTR(rc); 960 961 return phydev; 962 } 963 EXPORT_SYMBOL(phy_attach); 964 965 /** 966 * phy_detach - detach a PHY device from its network device 967 * @phydev: target phy_device struct 968 * 969 * This detaches the phy device from its network device and the phy 970 * driver, and drops the reference count taken in phy_attach_direct(). 971 */ 972 void phy_detach(struct phy_device *phydev) 973 { 974 struct mii_bus *bus; 975 int i; 976 977 phydev->attached_dev->phydev = NULL; 978 phydev->attached_dev = NULL; 979 phy_suspend(phydev); 980 981 /* If the device had no specific driver before (i.e. - it 982 * was using the generic driver), we unbind the device 983 * from the generic driver so that there's a chance a 984 * real driver could be loaded 985 */ 986 for (i = 0; i < ARRAY_SIZE(genphy_driver); i++) { 987 if (phydev->mdio.dev.driver == 988 &genphy_driver[i].mdiodrv.driver) { 989 device_release_driver(&phydev->mdio.dev); 990 break; 991 } 992 } 993 994 /* 995 * The phydev might go away on the put_device() below, so avoid 996 * a use-after-free bug by reading the underlying bus first. 997 */ 998 bus = phydev->mdio.bus; 999 1000 put_device(&phydev->mdio.dev); 1001 module_put(bus->owner); 1002 } 1003 EXPORT_SYMBOL(phy_detach); 1004 1005 int phy_suspend(struct phy_device *phydev) 1006 { 1007 struct phy_driver *phydrv = to_phy_driver(phydev->mdio.dev.driver); 1008 struct ethtool_wolinfo wol = { .cmd = ETHTOOL_GWOL }; 1009 int ret = 0; 1010 1011 /* If the device has WOL enabled, we cannot suspend the PHY */ 1012 phy_ethtool_get_wol(phydev, &wol); 1013 if (wol.wolopts) 1014 return -EBUSY; 1015 1016 if (phydrv->suspend) 1017 ret = phydrv->suspend(phydev); 1018 1019 if (ret) 1020 return ret; 1021 1022 phydev->suspended = true; 1023 1024 return ret; 1025 } 1026 EXPORT_SYMBOL(phy_suspend); 1027 1028 int phy_resume(struct phy_device *phydev) 1029 { 1030 struct phy_driver *phydrv = to_phy_driver(phydev->mdio.dev.driver); 1031 int ret = 0; 1032 1033 if (phydrv->resume) 1034 ret = phydrv->resume(phydev); 1035 1036 if (ret) 1037 return ret; 1038 1039 phydev->suspended = false; 1040 1041 return ret; 1042 } 1043 EXPORT_SYMBOL(phy_resume); 1044 1045 /* Generic PHY support and helper functions */ 1046 1047 /** 1048 * genphy_config_advert - sanitize and advertise auto-negotiation parameters 1049 * @phydev: target phy_device struct 1050 * 1051 * Description: Writes MII_ADVERTISE with the appropriate values, 1052 * after sanitizing the values to make sure we only advertise 1053 * what is supported. Returns < 0 on error, 0 if the PHY's advertisement 1054 * hasn't changed, and > 0 if it has changed. 1055 */ 1056 static int genphy_config_advert(struct phy_device *phydev) 1057 { 1058 u32 advertise; 1059 int oldadv, adv, bmsr; 1060 int err, changed = 0; 1061 1062 /* Only allow advertising what this PHY supports */ 1063 phydev->advertising &= phydev->supported; 1064 advertise = phydev->advertising; 1065 1066 /* Setup standard advertisement */ 1067 adv = phy_read(phydev, MII_ADVERTISE); 1068 if (adv < 0) 1069 return adv; 1070 1071 oldadv = adv; 1072 adv &= ~(ADVERTISE_ALL | ADVERTISE_100BASE4 | ADVERTISE_PAUSE_CAP | 1073 ADVERTISE_PAUSE_ASYM); 1074 adv |= ethtool_adv_to_mii_adv_t(advertise); 1075 1076 if (adv != oldadv) { 1077 err = phy_write(phydev, MII_ADVERTISE, adv); 1078 1079 if (err < 0) 1080 return err; 1081 changed = 1; 1082 } 1083 1084 bmsr = phy_read(phydev, MII_BMSR); 1085 if (bmsr < 0) 1086 return bmsr; 1087 1088 /* Per 802.3-2008, Section 22.2.4.2.16 Extended status all 1089 * 1000Mbits/sec capable PHYs shall have the BMSR_ESTATEN bit set to a 1090 * logical 1. 1091 */ 1092 if (!(bmsr & BMSR_ESTATEN)) 1093 return changed; 1094 1095 /* Configure gigabit if it's supported */ 1096 adv = phy_read(phydev, MII_CTRL1000); 1097 if (adv < 0) 1098 return adv; 1099 1100 oldadv = adv; 1101 adv &= ~(ADVERTISE_1000FULL | ADVERTISE_1000HALF); 1102 1103 if (phydev->supported & (SUPPORTED_1000baseT_Half | 1104 SUPPORTED_1000baseT_Full)) { 1105 adv |= ethtool_adv_to_mii_ctrl1000_t(advertise); 1106 } 1107 1108 if (adv != oldadv) 1109 changed = 1; 1110 1111 err = phy_write(phydev, MII_CTRL1000, adv); 1112 if (err < 0) 1113 return err; 1114 1115 return changed; 1116 } 1117 1118 /** 1119 * genphy_setup_forced - configures/forces speed/duplex from @phydev 1120 * @phydev: target phy_device struct 1121 * 1122 * Description: Configures MII_BMCR to force speed/duplex 1123 * to the values in phydev. Assumes that the values are valid. 1124 * Please see phy_sanitize_settings(). 1125 */ 1126 int genphy_setup_forced(struct phy_device *phydev) 1127 { 1128 int ctl = phy_read(phydev, MII_BMCR); 1129 1130 ctl &= BMCR_LOOPBACK | BMCR_ISOLATE | BMCR_PDOWN; 1131 phydev->pause = 0; 1132 phydev->asym_pause = 0; 1133 1134 if (SPEED_1000 == phydev->speed) 1135 ctl |= BMCR_SPEED1000; 1136 else if (SPEED_100 == phydev->speed) 1137 ctl |= BMCR_SPEED100; 1138 1139 if (DUPLEX_FULL == phydev->duplex) 1140 ctl |= BMCR_FULLDPLX; 1141 1142 return phy_write(phydev, MII_BMCR, ctl); 1143 } 1144 EXPORT_SYMBOL(genphy_setup_forced); 1145 1146 /** 1147 * genphy_restart_aneg - Enable and Restart Autonegotiation 1148 * @phydev: target phy_device struct 1149 */ 1150 int genphy_restart_aneg(struct phy_device *phydev) 1151 { 1152 int ctl = phy_read(phydev, MII_BMCR); 1153 1154 if (ctl < 0) 1155 return ctl; 1156 1157 ctl |= BMCR_ANENABLE | BMCR_ANRESTART; 1158 1159 /* Don't isolate the PHY if we're negotiating */ 1160 ctl &= ~BMCR_ISOLATE; 1161 1162 return phy_write(phydev, MII_BMCR, ctl); 1163 } 1164 EXPORT_SYMBOL(genphy_restart_aneg); 1165 1166 /** 1167 * genphy_config_aneg - restart auto-negotiation or write BMCR 1168 * @phydev: target phy_device struct 1169 * 1170 * Description: If auto-negotiation is enabled, we configure the 1171 * advertising, and then restart auto-negotiation. If it is not 1172 * enabled, then we write the BMCR. 1173 */ 1174 int genphy_config_aneg(struct phy_device *phydev) 1175 { 1176 int result; 1177 1178 if (AUTONEG_ENABLE != phydev->autoneg) 1179 return genphy_setup_forced(phydev); 1180 1181 result = genphy_config_advert(phydev); 1182 if (result < 0) /* error */ 1183 return result; 1184 if (result == 0) { 1185 /* Advertisement hasn't changed, but maybe aneg was never on to 1186 * begin with? Or maybe phy was isolated? 1187 */ 1188 int ctl = phy_read(phydev, MII_BMCR); 1189 1190 if (ctl < 0) 1191 return ctl; 1192 1193 if (!(ctl & BMCR_ANENABLE) || (ctl & BMCR_ISOLATE)) 1194 result = 1; /* do restart aneg */ 1195 } 1196 1197 /* Only restart aneg if we are advertising something different 1198 * than we were before. 1199 */ 1200 if (result > 0) 1201 result = genphy_restart_aneg(phydev); 1202 1203 return result; 1204 } 1205 EXPORT_SYMBOL(genphy_config_aneg); 1206 1207 /** 1208 * genphy_aneg_done - return auto-negotiation status 1209 * @phydev: target phy_device struct 1210 * 1211 * Description: Reads the status register and returns 0 either if 1212 * auto-negotiation is incomplete, or if there was an error. 1213 * Returns BMSR_ANEGCOMPLETE if auto-negotiation is done. 1214 */ 1215 int genphy_aneg_done(struct phy_device *phydev) 1216 { 1217 int retval = phy_read(phydev, MII_BMSR); 1218 1219 return (retval < 0) ? retval : (retval & BMSR_ANEGCOMPLETE); 1220 } 1221 EXPORT_SYMBOL(genphy_aneg_done); 1222 1223 static int gen10g_config_aneg(struct phy_device *phydev) 1224 { 1225 return 0; 1226 } 1227 1228 /** 1229 * genphy_update_link - update link status in @phydev 1230 * @phydev: target phy_device struct 1231 * 1232 * Description: Update the value in phydev->link to reflect the 1233 * current link value. In order to do this, we need to read 1234 * the status register twice, keeping the second value. 1235 */ 1236 int genphy_update_link(struct phy_device *phydev) 1237 { 1238 int status; 1239 1240 /* Do a fake read */ 1241 status = phy_read(phydev, MII_BMSR); 1242 if (status < 0) 1243 return status; 1244 1245 /* Read link and autonegotiation status */ 1246 status = phy_read(phydev, MII_BMSR); 1247 if (status < 0) 1248 return status; 1249 1250 if ((status & BMSR_LSTATUS) == 0) 1251 phydev->link = 0; 1252 else 1253 phydev->link = 1; 1254 1255 return 0; 1256 } 1257 EXPORT_SYMBOL(genphy_update_link); 1258 1259 /** 1260 * genphy_read_status - check the link status and update current link state 1261 * @phydev: target phy_device struct 1262 * 1263 * Description: Check the link, then figure out the current state 1264 * by comparing what we advertise with what the link partner 1265 * advertises. Start by checking the gigabit possibilities, 1266 * then move on to 10/100. 1267 */ 1268 int genphy_read_status(struct phy_device *phydev) 1269 { 1270 int adv; 1271 int err; 1272 int lpa; 1273 int lpagb = 0; 1274 int common_adv; 1275 int common_adv_gb = 0; 1276 1277 /* Update the link, but return if there was an error */ 1278 err = genphy_update_link(phydev); 1279 if (err) 1280 return err; 1281 1282 phydev->lp_advertising = 0; 1283 1284 if (AUTONEG_ENABLE == phydev->autoneg) { 1285 if (phydev->supported & (SUPPORTED_1000baseT_Half 1286 | SUPPORTED_1000baseT_Full)) { 1287 lpagb = phy_read(phydev, MII_STAT1000); 1288 if (lpagb < 0) 1289 return lpagb; 1290 1291 adv = phy_read(phydev, MII_CTRL1000); 1292 if (adv < 0) 1293 return adv; 1294 1295 phydev->lp_advertising = 1296 mii_stat1000_to_ethtool_lpa_t(lpagb); 1297 common_adv_gb = lpagb & adv << 2; 1298 } 1299 1300 lpa = phy_read(phydev, MII_LPA); 1301 if (lpa < 0) 1302 return lpa; 1303 1304 phydev->lp_advertising |= mii_lpa_to_ethtool_lpa_t(lpa); 1305 1306 adv = phy_read(phydev, MII_ADVERTISE); 1307 if (adv < 0) 1308 return adv; 1309 1310 common_adv = lpa & adv; 1311 1312 phydev->speed = SPEED_10; 1313 phydev->duplex = DUPLEX_HALF; 1314 phydev->pause = 0; 1315 phydev->asym_pause = 0; 1316 1317 if (common_adv_gb & (LPA_1000FULL | LPA_1000HALF)) { 1318 phydev->speed = SPEED_1000; 1319 1320 if (common_adv_gb & LPA_1000FULL) 1321 phydev->duplex = DUPLEX_FULL; 1322 } else if (common_adv & (LPA_100FULL | LPA_100HALF)) { 1323 phydev->speed = SPEED_100; 1324 1325 if (common_adv & LPA_100FULL) 1326 phydev->duplex = DUPLEX_FULL; 1327 } else 1328 if (common_adv & LPA_10FULL) 1329 phydev->duplex = DUPLEX_FULL; 1330 1331 if (phydev->duplex == DUPLEX_FULL) { 1332 phydev->pause = lpa & LPA_PAUSE_CAP ? 1 : 0; 1333 phydev->asym_pause = lpa & LPA_PAUSE_ASYM ? 1 : 0; 1334 } 1335 } else { 1336 int bmcr = phy_read(phydev, MII_BMCR); 1337 1338 if (bmcr < 0) 1339 return bmcr; 1340 1341 if (bmcr & BMCR_FULLDPLX) 1342 phydev->duplex = DUPLEX_FULL; 1343 else 1344 phydev->duplex = DUPLEX_HALF; 1345 1346 if (bmcr & BMCR_SPEED1000) 1347 phydev->speed = SPEED_1000; 1348 else if (bmcr & BMCR_SPEED100) 1349 phydev->speed = SPEED_100; 1350 else 1351 phydev->speed = SPEED_10; 1352 1353 phydev->pause = 0; 1354 phydev->asym_pause = 0; 1355 } 1356 1357 return 0; 1358 } 1359 EXPORT_SYMBOL(genphy_read_status); 1360 1361 static int gen10g_read_status(struct phy_device *phydev) 1362 { 1363 int devad, reg; 1364 u32 mmd_mask = phydev->c45_ids.devices_in_package; 1365 1366 phydev->link = 1; 1367 1368 /* For now just lie and say it's 10G all the time */ 1369 phydev->speed = SPEED_10000; 1370 phydev->duplex = DUPLEX_FULL; 1371 1372 for (devad = 0; mmd_mask; devad++, mmd_mask = mmd_mask >> 1) { 1373 if (!(mmd_mask & 1)) 1374 continue; 1375 1376 /* Read twice because link state is latched and a 1377 * read moves the current state into the register 1378 */ 1379 phy_read_mmd(phydev, devad, MDIO_STAT1); 1380 reg = phy_read_mmd(phydev, devad, MDIO_STAT1); 1381 if (reg < 0 || !(reg & MDIO_STAT1_LSTATUS)) 1382 phydev->link = 0; 1383 } 1384 1385 return 0; 1386 } 1387 1388 /** 1389 * genphy_soft_reset - software reset the PHY via BMCR_RESET bit 1390 * @phydev: target phy_device struct 1391 * 1392 * Description: Perform a software PHY reset using the standard 1393 * BMCR_RESET bit and poll for the reset bit to be cleared. 1394 * 1395 * Returns: 0 on success, < 0 on failure 1396 */ 1397 int genphy_soft_reset(struct phy_device *phydev) 1398 { 1399 int ret; 1400 1401 ret = phy_write(phydev, MII_BMCR, BMCR_RESET); 1402 if (ret < 0) 1403 return ret; 1404 1405 return phy_poll_reset(phydev); 1406 } 1407 EXPORT_SYMBOL(genphy_soft_reset); 1408 1409 int genphy_config_init(struct phy_device *phydev) 1410 { 1411 int val; 1412 u32 features; 1413 1414 features = (SUPPORTED_TP | SUPPORTED_MII 1415 | SUPPORTED_AUI | SUPPORTED_FIBRE | 1416 SUPPORTED_BNC | SUPPORTED_Pause | SUPPORTED_Asym_Pause); 1417 1418 /* Do we support autonegotiation? */ 1419 val = phy_read(phydev, MII_BMSR); 1420 if (val < 0) 1421 return val; 1422 1423 if (val & BMSR_ANEGCAPABLE) 1424 features |= SUPPORTED_Autoneg; 1425 1426 if (val & BMSR_100FULL) 1427 features |= SUPPORTED_100baseT_Full; 1428 if (val & BMSR_100HALF) 1429 features |= SUPPORTED_100baseT_Half; 1430 if (val & BMSR_10FULL) 1431 features |= SUPPORTED_10baseT_Full; 1432 if (val & BMSR_10HALF) 1433 features |= SUPPORTED_10baseT_Half; 1434 1435 if (val & BMSR_ESTATEN) { 1436 val = phy_read(phydev, MII_ESTATUS); 1437 if (val < 0) 1438 return val; 1439 1440 if (val & ESTATUS_1000_TFULL) 1441 features |= SUPPORTED_1000baseT_Full; 1442 if (val & ESTATUS_1000_THALF) 1443 features |= SUPPORTED_1000baseT_Half; 1444 } 1445 1446 phydev->supported &= features; 1447 phydev->advertising &= features; 1448 1449 return 0; 1450 } 1451 1452 static int gen10g_soft_reset(struct phy_device *phydev) 1453 { 1454 /* Do nothing for now */ 1455 return 0; 1456 } 1457 EXPORT_SYMBOL(genphy_config_init); 1458 1459 static int gen10g_config_init(struct phy_device *phydev) 1460 { 1461 /* Temporarily just say we support everything */ 1462 phydev->supported = SUPPORTED_10000baseT_Full; 1463 phydev->advertising = SUPPORTED_10000baseT_Full; 1464 1465 return 0; 1466 } 1467 1468 int genphy_suspend(struct phy_device *phydev) 1469 { 1470 int value; 1471 1472 mutex_lock(&phydev->lock); 1473 1474 value = phy_read(phydev, MII_BMCR); 1475 phy_write(phydev, MII_BMCR, value | BMCR_PDOWN); 1476 1477 mutex_unlock(&phydev->lock); 1478 1479 return 0; 1480 } 1481 EXPORT_SYMBOL(genphy_suspend); 1482 1483 static int gen10g_suspend(struct phy_device *phydev) 1484 { 1485 return 0; 1486 } 1487 1488 int genphy_resume(struct phy_device *phydev) 1489 { 1490 int value; 1491 1492 mutex_lock(&phydev->lock); 1493 1494 value = phy_read(phydev, MII_BMCR); 1495 phy_write(phydev, MII_BMCR, value & ~BMCR_PDOWN); 1496 1497 mutex_unlock(&phydev->lock); 1498 1499 return 0; 1500 } 1501 EXPORT_SYMBOL(genphy_resume); 1502 1503 static int gen10g_resume(struct phy_device *phydev) 1504 { 1505 return 0; 1506 } 1507 1508 static int __set_phy_supported(struct phy_device *phydev, u32 max_speed) 1509 { 1510 /* The default values for phydev->supported are provided by the PHY 1511 * driver "features" member, we want to reset to sane defaults first 1512 * before supporting higher speeds. 1513 */ 1514 phydev->supported &= PHY_DEFAULT_FEATURES; 1515 1516 switch (max_speed) { 1517 default: 1518 return -ENOTSUPP; 1519 case SPEED_1000: 1520 phydev->supported |= PHY_1000BT_FEATURES; 1521 /* fall through */ 1522 case SPEED_100: 1523 phydev->supported |= PHY_100BT_FEATURES; 1524 /* fall through */ 1525 case SPEED_10: 1526 phydev->supported |= PHY_10BT_FEATURES; 1527 } 1528 1529 return 0; 1530 } 1531 1532 int phy_set_max_speed(struct phy_device *phydev, u32 max_speed) 1533 { 1534 int err; 1535 1536 err = __set_phy_supported(phydev, max_speed); 1537 if (err) 1538 return err; 1539 1540 phydev->advertising = phydev->supported; 1541 1542 return 0; 1543 } 1544 EXPORT_SYMBOL(phy_set_max_speed); 1545 1546 static void of_set_phy_supported(struct phy_device *phydev) 1547 { 1548 struct device_node *node = phydev->mdio.dev.of_node; 1549 u32 max_speed; 1550 1551 if (!IS_ENABLED(CONFIG_OF_MDIO)) 1552 return; 1553 1554 if (!node) 1555 return; 1556 1557 if (!of_property_read_u32(node, "max-speed", &max_speed)) 1558 __set_phy_supported(phydev, max_speed); 1559 } 1560 1561 /** 1562 * phy_probe - probe and init a PHY device 1563 * @dev: device to probe and init 1564 * 1565 * Description: Take care of setting up the phy_device structure, 1566 * set the state to READY (the driver's init function should 1567 * set it to STARTING if needed). 1568 */ 1569 static int phy_probe(struct device *dev) 1570 { 1571 struct phy_device *phydev = to_phy_device(dev); 1572 struct device_driver *drv = phydev->mdio.dev.driver; 1573 struct phy_driver *phydrv = to_phy_driver(drv); 1574 int err = 0; 1575 1576 phydev->drv = phydrv; 1577 1578 /* Disable the interrupt if the PHY doesn't support it 1579 * but the interrupt is still a valid one 1580 */ 1581 if (!(phydrv->flags & PHY_HAS_INTERRUPT) && 1582 phy_interrupt_is_valid(phydev)) 1583 phydev->irq = PHY_POLL; 1584 1585 if (phydrv->flags & PHY_IS_INTERNAL) 1586 phydev->is_internal = true; 1587 1588 mutex_lock(&phydev->lock); 1589 1590 /* Start out supporting everything. Eventually, 1591 * a controller will attach, and may modify one 1592 * or both of these values 1593 */ 1594 phydev->supported = phydrv->features; 1595 of_set_phy_supported(phydev); 1596 phydev->advertising = phydev->supported; 1597 1598 /* Set the state to READY by default */ 1599 phydev->state = PHY_READY; 1600 1601 if (phydev->drv->probe) 1602 err = phydev->drv->probe(phydev); 1603 1604 mutex_unlock(&phydev->lock); 1605 1606 return err; 1607 } 1608 1609 static int phy_remove(struct device *dev) 1610 { 1611 struct phy_device *phydev = to_phy_device(dev); 1612 1613 mutex_lock(&phydev->lock); 1614 phydev->state = PHY_DOWN; 1615 mutex_unlock(&phydev->lock); 1616 1617 if (phydev->drv->remove) 1618 phydev->drv->remove(phydev); 1619 phydev->drv = NULL; 1620 1621 return 0; 1622 } 1623 1624 /** 1625 * phy_driver_register - register a phy_driver with the PHY layer 1626 * @new_driver: new phy_driver to register 1627 * @owner: module owning this PHY 1628 */ 1629 int phy_driver_register(struct phy_driver *new_driver, struct module *owner) 1630 { 1631 int retval; 1632 1633 new_driver->mdiodrv.flags |= MDIO_DEVICE_IS_PHY; 1634 new_driver->mdiodrv.driver.name = new_driver->name; 1635 new_driver->mdiodrv.driver.bus = &mdio_bus_type; 1636 new_driver->mdiodrv.driver.probe = phy_probe; 1637 new_driver->mdiodrv.driver.remove = phy_remove; 1638 new_driver->mdiodrv.driver.owner = owner; 1639 1640 retval = driver_register(&new_driver->mdiodrv.driver); 1641 if (retval) { 1642 pr_err("%s: Error %d in registering driver\n", 1643 new_driver->name, retval); 1644 1645 return retval; 1646 } 1647 1648 pr_debug("%s: Registered new driver\n", new_driver->name); 1649 1650 return 0; 1651 } 1652 EXPORT_SYMBOL(phy_driver_register); 1653 1654 int phy_drivers_register(struct phy_driver *new_driver, int n, 1655 struct module *owner) 1656 { 1657 int i, ret = 0; 1658 1659 for (i = 0; i < n; i++) { 1660 ret = phy_driver_register(new_driver + i, owner); 1661 if (ret) { 1662 while (i-- > 0) 1663 phy_driver_unregister(new_driver + i); 1664 break; 1665 } 1666 } 1667 return ret; 1668 } 1669 EXPORT_SYMBOL(phy_drivers_register); 1670 1671 void phy_driver_unregister(struct phy_driver *drv) 1672 { 1673 driver_unregister(&drv->mdiodrv.driver); 1674 } 1675 EXPORT_SYMBOL(phy_driver_unregister); 1676 1677 void phy_drivers_unregister(struct phy_driver *drv, int n) 1678 { 1679 int i; 1680 1681 for (i = 0; i < n; i++) 1682 phy_driver_unregister(drv + i); 1683 } 1684 EXPORT_SYMBOL(phy_drivers_unregister); 1685 1686 static struct phy_driver genphy_driver[] = { 1687 { 1688 .phy_id = 0xffffffff, 1689 .phy_id_mask = 0xffffffff, 1690 .name = "Generic PHY", 1691 .soft_reset = genphy_soft_reset, 1692 .config_init = genphy_config_init, 1693 .features = PHY_GBIT_FEATURES | SUPPORTED_MII | 1694 SUPPORTED_AUI | SUPPORTED_FIBRE | 1695 SUPPORTED_BNC, 1696 .config_aneg = genphy_config_aneg, 1697 .aneg_done = genphy_aneg_done, 1698 .read_status = genphy_read_status, 1699 .suspend = genphy_suspend, 1700 .resume = genphy_resume, 1701 }, { 1702 .phy_id = 0xffffffff, 1703 .phy_id_mask = 0xffffffff, 1704 .name = "Generic 10G PHY", 1705 .soft_reset = gen10g_soft_reset, 1706 .config_init = gen10g_config_init, 1707 .features = 0, 1708 .config_aneg = gen10g_config_aneg, 1709 .read_status = gen10g_read_status, 1710 .suspend = gen10g_suspend, 1711 .resume = gen10g_resume, 1712 } }; 1713 1714 static int __init phy_init(void) 1715 { 1716 int rc; 1717 1718 rc = mdio_bus_init(); 1719 if (rc) 1720 return rc; 1721 1722 rc = phy_drivers_register(genphy_driver, 1723 ARRAY_SIZE(genphy_driver), THIS_MODULE); 1724 if (rc) 1725 mdio_bus_exit(); 1726 1727 return rc; 1728 } 1729 1730 static void __exit phy_exit(void) 1731 { 1732 phy_drivers_unregister(genphy_driver, 1733 ARRAY_SIZE(genphy_driver)); 1734 mdio_bus_exit(); 1735 } 1736 1737 subsys_initcall(phy_init); 1738 module_exit(phy_exit); 1739