1 // SPDX-License-Identifier: (GPL-2.0 OR MIT) 2 /* 3 * Driver for Microsemi VSC85xx PHYs 4 * 5 * Author: Nagaraju Lakkaraju 6 * License: Dual MIT/GPL 7 * Copyright (c) 2016 Microsemi Corporation 8 */ 9 10 #include <linux/firmware.h> 11 #include <linux/jiffies.h> 12 #include <linux/kernel.h> 13 #include <linux/module.h> 14 #include <linux/mdio.h> 15 #include <linux/mii.h> 16 #include <linux/phy.h> 17 #include <linux/of.h> 18 #include <linux/netdevice.h> 19 #include <dt-bindings/net/mscc-phy-vsc8531.h> 20 #include "mscc_serdes.h" 21 #include "mscc.h" 22 23 static const struct vsc85xx_hw_stat vsc85xx_hw_stats[] = { 24 { 25 .string = "phy_receive_errors", 26 .reg = MSCC_PHY_ERR_RX_CNT, 27 .page = MSCC_PHY_PAGE_STANDARD, 28 .mask = ERR_CNT_MASK, 29 }, { 30 .string = "phy_false_carrier", 31 .reg = MSCC_PHY_ERR_FALSE_CARRIER_CNT, 32 .page = MSCC_PHY_PAGE_STANDARD, 33 .mask = ERR_CNT_MASK, 34 }, { 35 .string = "phy_cu_media_link_disconnect", 36 .reg = MSCC_PHY_ERR_LINK_DISCONNECT_CNT, 37 .page = MSCC_PHY_PAGE_STANDARD, 38 .mask = ERR_CNT_MASK, 39 }, { 40 .string = "phy_cu_media_crc_good_count", 41 .reg = MSCC_PHY_CU_MEDIA_CRC_VALID_CNT, 42 .page = MSCC_PHY_PAGE_EXTENDED, 43 .mask = VALID_CRC_CNT_CRC_MASK, 44 }, { 45 .string = "phy_cu_media_crc_error_count", 46 .reg = MSCC_PHY_EXT_PHY_CNTL_4, 47 .page = MSCC_PHY_PAGE_EXTENDED, 48 .mask = ERR_CNT_MASK, 49 }, 50 }; 51 52 static const struct vsc85xx_hw_stat vsc8584_hw_stats[] = { 53 { 54 .string = "phy_receive_errors", 55 .reg = MSCC_PHY_ERR_RX_CNT, 56 .page = MSCC_PHY_PAGE_STANDARD, 57 .mask = ERR_CNT_MASK, 58 }, { 59 .string = "phy_false_carrier", 60 .reg = MSCC_PHY_ERR_FALSE_CARRIER_CNT, 61 .page = MSCC_PHY_PAGE_STANDARD, 62 .mask = ERR_CNT_MASK, 63 }, { 64 .string = "phy_cu_media_link_disconnect", 65 .reg = MSCC_PHY_ERR_LINK_DISCONNECT_CNT, 66 .page = MSCC_PHY_PAGE_STANDARD, 67 .mask = ERR_CNT_MASK, 68 }, { 69 .string = "phy_cu_media_crc_good_count", 70 .reg = MSCC_PHY_CU_MEDIA_CRC_VALID_CNT, 71 .page = MSCC_PHY_PAGE_EXTENDED, 72 .mask = VALID_CRC_CNT_CRC_MASK, 73 }, { 74 .string = "phy_cu_media_crc_error_count", 75 .reg = MSCC_PHY_EXT_PHY_CNTL_4, 76 .page = MSCC_PHY_PAGE_EXTENDED, 77 .mask = ERR_CNT_MASK, 78 }, { 79 .string = "phy_serdes_tx_good_pkt_count", 80 .reg = MSCC_PHY_SERDES_TX_VALID_CNT, 81 .page = MSCC_PHY_PAGE_EXTENDED_3, 82 .mask = VALID_CRC_CNT_CRC_MASK, 83 }, { 84 .string = "phy_serdes_tx_bad_crc_count", 85 .reg = MSCC_PHY_SERDES_TX_CRC_ERR_CNT, 86 .page = MSCC_PHY_PAGE_EXTENDED_3, 87 .mask = ERR_CNT_MASK, 88 }, { 89 .string = "phy_serdes_rx_good_pkt_count", 90 .reg = MSCC_PHY_SERDES_RX_VALID_CNT, 91 .page = MSCC_PHY_PAGE_EXTENDED_3, 92 .mask = VALID_CRC_CNT_CRC_MASK, 93 }, { 94 .string = "phy_serdes_rx_bad_crc_count", 95 .reg = MSCC_PHY_SERDES_RX_CRC_ERR_CNT, 96 .page = MSCC_PHY_PAGE_EXTENDED_3, 97 .mask = ERR_CNT_MASK, 98 }, 99 }; 100 101 #if IS_ENABLED(CONFIG_OF_MDIO) 102 static const struct vsc8531_edge_rate_table edge_table[] = { 103 {MSCC_VDDMAC_3300, { 0, 2, 4, 7, 10, 17, 29, 53} }, 104 {MSCC_VDDMAC_2500, { 0, 3, 6, 10, 14, 23, 37, 63} }, 105 {MSCC_VDDMAC_1800, { 0, 5, 9, 16, 23, 35, 52, 76} }, 106 {MSCC_VDDMAC_1500, { 0, 6, 14, 21, 29, 42, 58, 77} }, 107 }; 108 #endif 109 110 static const int vsc85xx_internal_delay[] = {200, 800, 1100, 1700, 2000, 2300, 111 2600, 3400}; 112 113 static int vsc85xx_phy_read_page(struct phy_device *phydev) 114 { 115 return __phy_read(phydev, MSCC_EXT_PAGE_ACCESS); 116 } 117 118 static int vsc85xx_phy_write_page(struct phy_device *phydev, int page) 119 { 120 return __phy_write(phydev, MSCC_EXT_PAGE_ACCESS, page); 121 } 122 123 static int vsc85xx_get_sset_count(struct phy_device *phydev) 124 { 125 struct vsc8531_private *priv = phydev->priv; 126 127 if (!priv) 128 return 0; 129 130 return priv->nstats; 131 } 132 133 static void vsc85xx_get_strings(struct phy_device *phydev, u8 *data) 134 { 135 struct vsc8531_private *priv = phydev->priv; 136 int i; 137 138 if (!priv) 139 return; 140 141 for (i = 0; i < priv->nstats; i++) 142 strscpy(data + i * ETH_GSTRING_LEN, priv->hw_stats[i].string, 143 ETH_GSTRING_LEN); 144 } 145 146 static u64 vsc85xx_get_stat(struct phy_device *phydev, int i) 147 { 148 struct vsc8531_private *priv = phydev->priv; 149 int val; 150 151 val = phy_read_paged(phydev, priv->hw_stats[i].page, 152 priv->hw_stats[i].reg); 153 if (val < 0) 154 return U64_MAX; 155 156 val = val & priv->hw_stats[i].mask; 157 priv->stats[i] += val; 158 159 return priv->stats[i]; 160 } 161 162 static void vsc85xx_get_stats(struct phy_device *phydev, 163 struct ethtool_stats *stats, u64 *data) 164 { 165 struct vsc8531_private *priv = phydev->priv; 166 int i; 167 168 if (!priv) 169 return; 170 171 for (i = 0; i < priv->nstats; i++) 172 data[i] = vsc85xx_get_stat(phydev, i); 173 } 174 175 static int vsc85xx_led_cntl_set(struct phy_device *phydev, 176 u8 led_num, 177 u8 mode) 178 { 179 int rc; 180 u16 reg_val; 181 182 mutex_lock(&phydev->lock); 183 reg_val = phy_read(phydev, MSCC_PHY_LED_MODE_SEL); 184 reg_val &= ~LED_MODE_SEL_MASK(led_num); 185 reg_val |= LED_MODE_SEL(led_num, (u16)mode); 186 rc = phy_write(phydev, MSCC_PHY_LED_MODE_SEL, reg_val); 187 mutex_unlock(&phydev->lock); 188 189 return rc; 190 } 191 192 static int vsc85xx_mdix_get(struct phy_device *phydev, u8 *mdix) 193 { 194 u16 reg_val; 195 196 reg_val = phy_read(phydev, MSCC_PHY_DEV_AUX_CNTL); 197 if (reg_val & HP_AUTO_MDIX_X_OVER_IND_MASK) 198 *mdix = ETH_TP_MDI_X; 199 else 200 *mdix = ETH_TP_MDI; 201 202 return 0; 203 } 204 205 static int vsc85xx_mdix_set(struct phy_device *phydev, u8 mdix) 206 { 207 int rc; 208 u16 reg_val; 209 210 reg_val = phy_read(phydev, MSCC_PHY_BYPASS_CONTROL); 211 if (mdix == ETH_TP_MDI || mdix == ETH_TP_MDI_X) { 212 reg_val |= (DISABLE_PAIR_SWAP_CORR_MASK | 213 DISABLE_POLARITY_CORR_MASK | 214 DISABLE_HP_AUTO_MDIX_MASK); 215 } else { 216 reg_val &= ~(DISABLE_PAIR_SWAP_CORR_MASK | 217 DISABLE_POLARITY_CORR_MASK | 218 DISABLE_HP_AUTO_MDIX_MASK); 219 } 220 rc = phy_write(phydev, MSCC_PHY_BYPASS_CONTROL, reg_val); 221 if (rc) 222 return rc; 223 224 reg_val = 0; 225 226 if (mdix == ETH_TP_MDI) 227 reg_val = FORCE_MDI_CROSSOVER_MDI; 228 else if (mdix == ETH_TP_MDI_X) 229 reg_val = FORCE_MDI_CROSSOVER_MDIX; 230 231 rc = phy_modify_paged(phydev, MSCC_PHY_PAGE_EXTENDED, 232 MSCC_PHY_EXT_MODE_CNTL, FORCE_MDI_CROSSOVER_MASK, 233 reg_val); 234 if (rc < 0) 235 return rc; 236 237 return genphy_restart_aneg(phydev); 238 } 239 240 static int vsc85xx_downshift_get(struct phy_device *phydev, u8 *count) 241 { 242 int reg_val; 243 244 reg_val = phy_read_paged(phydev, MSCC_PHY_PAGE_EXTENDED, 245 MSCC_PHY_ACTIPHY_CNTL); 246 if (reg_val < 0) 247 return reg_val; 248 249 reg_val &= DOWNSHIFT_CNTL_MASK; 250 if (!(reg_val & DOWNSHIFT_EN)) 251 *count = DOWNSHIFT_DEV_DISABLE; 252 else 253 *count = ((reg_val & ~DOWNSHIFT_EN) >> DOWNSHIFT_CNTL_POS) + 2; 254 255 return 0; 256 } 257 258 static int vsc85xx_downshift_set(struct phy_device *phydev, u8 count) 259 { 260 if (count == DOWNSHIFT_DEV_DEFAULT_COUNT) { 261 /* Default downshift count 3 (i.e. Bit3:2 = 0b01) */ 262 count = ((1 << DOWNSHIFT_CNTL_POS) | DOWNSHIFT_EN); 263 } else if (count > DOWNSHIFT_COUNT_MAX || count == 1) { 264 phydev_err(phydev, "Downshift count should be 2,3,4 or 5\n"); 265 return -ERANGE; 266 } else if (count) { 267 /* Downshift count is either 2,3,4 or 5 */ 268 count = (((count - 2) << DOWNSHIFT_CNTL_POS) | DOWNSHIFT_EN); 269 } 270 271 return phy_modify_paged(phydev, MSCC_PHY_PAGE_EXTENDED, 272 MSCC_PHY_ACTIPHY_CNTL, DOWNSHIFT_CNTL_MASK, 273 count); 274 } 275 276 static int vsc85xx_wol_set(struct phy_device *phydev, 277 struct ethtool_wolinfo *wol) 278 { 279 const u8 *mac_addr = phydev->attached_dev->dev_addr; 280 int rc; 281 u16 reg_val; 282 u8 i; 283 u16 pwd[3] = {0, 0, 0}; 284 struct ethtool_wolinfo *wol_conf = wol; 285 286 rc = phy_select_page(phydev, MSCC_PHY_PAGE_EXTENDED_2); 287 if (rc < 0) 288 return phy_restore_page(phydev, rc, rc); 289 290 if (wol->wolopts & WAKE_MAGIC) { 291 /* Store the device address for the magic packet */ 292 for (i = 0; i < ARRAY_SIZE(pwd); i++) 293 pwd[i] = mac_addr[5 - (i * 2 + 1)] << 8 | 294 mac_addr[5 - i * 2]; 295 __phy_write(phydev, MSCC_PHY_WOL_LOWER_MAC_ADDR, pwd[0]); 296 __phy_write(phydev, MSCC_PHY_WOL_MID_MAC_ADDR, pwd[1]); 297 __phy_write(phydev, MSCC_PHY_WOL_UPPER_MAC_ADDR, pwd[2]); 298 } else { 299 __phy_write(phydev, MSCC_PHY_WOL_LOWER_MAC_ADDR, 0); 300 __phy_write(phydev, MSCC_PHY_WOL_MID_MAC_ADDR, 0); 301 __phy_write(phydev, MSCC_PHY_WOL_UPPER_MAC_ADDR, 0); 302 } 303 304 if (wol_conf->wolopts & WAKE_MAGICSECURE) { 305 for (i = 0; i < ARRAY_SIZE(pwd); i++) 306 pwd[i] = wol_conf->sopass[5 - (i * 2 + 1)] << 8 | 307 wol_conf->sopass[5 - i * 2]; 308 __phy_write(phydev, MSCC_PHY_WOL_LOWER_PASSWD, pwd[0]); 309 __phy_write(phydev, MSCC_PHY_WOL_MID_PASSWD, pwd[1]); 310 __phy_write(phydev, MSCC_PHY_WOL_UPPER_PASSWD, pwd[2]); 311 } else { 312 __phy_write(phydev, MSCC_PHY_WOL_LOWER_PASSWD, 0); 313 __phy_write(phydev, MSCC_PHY_WOL_MID_PASSWD, 0); 314 __phy_write(phydev, MSCC_PHY_WOL_UPPER_PASSWD, 0); 315 } 316 317 reg_val = __phy_read(phydev, MSCC_PHY_WOL_MAC_CONTROL); 318 if (wol_conf->wolopts & WAKE_MAGICSECURE) 319 reg_val |= SECURE_ON_ENABLE; 320 else 321 reg_val &= ~SECURE_ON_ENABLE; 322 __phy_write(phydev, MSCC_PHY_WOL_MAC_CONTROL, reg_val); 323 324 rc = phy_restore_page(phydev, rc, rc > 0 ? 0 : rc); 325 if (rc < 0) 326 return rc; 327 328 if (wol->wolopts & WAKE_MAGIC) { 329 /* Enable the WOL interrupt */ 330 reg_val = phy_read(phydev, MII_VSC85XX_INT_MASK); 331 reg_val |= MII_VSC85XX_INT_MASK_WOL; 332 rc = phy_write(phydev, MII_VSC85XX_INT_MASK, reg_val); 333 if (rc) 334 return rc; 335 } else { 336 /* Disable the WOL interrupt */ 337 reg_val = phy_read(phydev, MII_VSC85XX_INT_MASK); 338 reg_val &= (~MII_VSC85XX_INT_MASK_WOL); 339 rc = phy_write(phydev, MII_VSC85XX_INT_MASK, reg_val); 340 if (rc) 341 return rc; 342 } 343 /* Clear WOL iterrupt status */ 344 reg_val = phy_read(phydev, MII_VSC85XX_INT_STATUS); 345 346 return 0; 347 } 348 349 static void vsc85xx_wol_get(struct phy_device *phydev, 350 struct ethtool_wolinfo *wol) 351 { 352 int rc; 353 u16 reg_val; 354 u8 i; 355 u16 pwd[3] = {0, 0, 0}; 356 struct ethtool_wolinfo *wol_conf = wol; 357 358 rc = phy_select_page(phydev, MSCC_PHY_PAGE_EXTENDED_2); 359 if (rc < 0) 360 goto out_restore_page; 361 362 reg_val = __phy_read(phydev, MSCC_PHY_WOL_MAC_CONTROL); 363 if (reg_val & SECURE_ON_ENABLE) 364 wol_conf->wolopts |= WAKE_MAGICSECURE; 365 if (wol_conf->wolopts & WAKE_MAGICSECURE) { 366 pwd[0] = __phy_read(phydev, MSCC_PHY_WOL_LOWER_PASSWD); 367 pwd[1] = __phy_read(phydev, MSCC_PHY_WOL_MID_PASSWD); 368 pwd[2] = __phy_read(phydev, MSCC_PHY_WOL_UPPER_PASSWD); 369 for (i = 0; i < ARRAY_SIZE(pwd); i++) { 370 wol_conf->sopass[5 - i * 2] = pwd[i] & 0x00ff; 371 wol_conf->sopass[5 - (i * 2 + 1)] = (pwd[i] & 0xff00) 372 >> 8; 373 } 374 } 375 376 out_restore_page: 377 phy_restore_page(phydev, rc, rc > 0 ? 0 : rc); 378 } 379 380 #if IS_ENABLED(CONFIG_OF_MDIO) 381 static int vsc85xx_edge_rate_magic_get(struct phy_device *phydev) 382 { 383 u32 vdd, sd; 384 int i, j; 385 struct device *dev = &phydev->mdio.dev; 386 struct device_node *of_node = dev->of_node; 387 u8 sd_array_size = ARRAY_SIZE(edge_table[0].slowdown); 388 389 if (!of_node) 390 return -ENODEV; 391 392 if (of_property_read_u32(of_node, "vsc8531,vddmac", &vdd)) 393 vdd = MSCC_VDDMAC_3300; 394 395 if (of_property_read_u32(of_node, "vsc8531,edge-slowdown", &sd)) 396 sd = 0; 397 398 for (i = 0; i < ARRAY_SIZE(edge_table); i++) 399 if (edge_table[i].vddmac == vdd) 400 for (j = 0; j < sd_array_size; j++) 401 if (edge_table[i].slowdown[j] == sd) 402 return (sd_array_size - j - 1); 403 404 return -EINVAL; 405 } 406 407 static int vsc85xx_dt_led_mode_get(struct phy_device *phydev, 408 char *led, 409 u32 default_mode) 410 { 411 struct vsc8531_private *priv = phydev->priv; 412 struct device *dev = &phydev->mdio.dev; 413 struct device_node *of_node = dev->of_node; 414 u32 led_mode; 415 int err; 416 417 if (!of_node) 418 return -ENODEV; 419 420 led_mode = default_mode; 421 err = of_property_read_u32(of_node, led, &led_mode); 422 if (!err && !(BIT(led_mode) & priv->supp_led_modes)) { 423 phydev_err(phydev, "DT %s invalid\n", led); 424 return -EINVAL; 425 } 426 427 return led_mode; 428 } 429 430 #else 431 static int vsc85xx_edge_rate_magic_get(struct phy_device *phydev) 432 { 433 return 0; 434 } 435 436 static int vsc85xx_dt_led_mode_get(struct phy_device *phydev, 437 char *led, 438 u8 default_mode) 439 { 440 return default_mode; 441 } 442 #endif /* CONFIG_OF_MDIO */ 443 444 static int vsc85xx_dt_led_modes_get(struct phy_device *phydev, 445 u32 *default_mode) 446 { 447 struct vsc8531_private *priv = phydev->priv; 448 char led_dt_prop[28]; 449 int i, ret; 450 451 for (i = 0; i < priv->nleds; i++) { 452 ret = sprintf(led_dt_prop, "vsc8531,led-%d-mode", i); 453 if (ret < 0) 454 return ret; 455 456 ret = vsc85xx_dt_led_mode_get(phydev, led_dt_prop, 457 default_mode[i]); 458 if (ret < 0) 459 return ret; 460 priv->leds_mode[i] = ret; 461 } 462 463 return 0; 464 } 465 466 static int vsc85xx_edge_rate_cntl_set(struct phy_device *phydev, u8 edge_rate) 467 { 468 int rc; 469 470 mutex_lock(&phydev->lock); 471 rc = phy_modify_paged(phydev, MSCC_PHY_PAGE_EXTENDED_2, 472 MSCC_PHY_WOL_MAC_CONTROL, EDGE_RATE_CNTL_MASK, 473 edge_rate << EDGE_RATE_CNTL_POS); 474 mutex_unlock(&phydev->lock); 475 476 return rc; 477 } 478 479 static int vsc85xx_mac_if_set(struct phy_device *phydev, 480 phy_interface_t interface) 481 { 482 int rc; 483 u16 reg_val; 484 485 mutex_lock(&phydev->lock); 486 reg_val = phy_read(phydev, MSCC_PHY_EXT_PHY_CNTL_1); 487 reg_val &= ~(MAC_IF_SELECTION_MASK); 488 switch (interface) { 489 case PHY_INTERFACE_MODE_RGMII_TXID: 490 case PHY_INTERFACE_MODE_RGMII_RXID: 491 case PHY_INTERFACE_MODE_RGMII_ID: 492 case PHY_INTERFACE_MODE_RGMII: 493 reg_val |= (MAC_IF_SELECTION_RGMII << MAC_IF_SELECTION_POS); 494 break; 495 case PHY_INTERFACE_MODE_RMII: 496 reg_val |= (MAC_IF_SELECTION_RMII << MAC_IF_SELECTION_POS); 497 break; 498 case PHY_INTERFACE_MODE_MII: 499 case PHY_INTERFACE_MODE_GMII: 500 reg_val |= (MAC_IF_SELECTION_GMII << MAC_IF_SELECTION_POS); 501 break; 502 default: 503 rc = -EINVAL; 504 goto out_unlock; 505 } 506 rc = phy_write(phydev, MSCC_PHY_EXT_PHY_CNTL_1, reg_val); 507 if (rc) 508 goto out_unlock; 509 510 rc = genphy_soft_reset(phydev); 511 512 out_unlock: 513 mutex_unlock(&phydev->lock); 514 515 return rc; 516 } 517 518 /* Set the RGMII RX and TX clock skews individually, according to the PHY 519 * interface type, to: 520 * * 0.2 ns (their default, and lowest, hardware value) if delays should 521 * not be enabled 522 * * 2.0 ns (which causes the data to be sampled at exactly half way between 523 * clock transitions at 1000 Mbps) if delays should be enabled 524 */ 525 static int vsc85xx_update_rgmii_cntl(struct phy_device *phydev, u32 rgmii_cntl, 526 u16 rgmii_rx_delay_mask, 527 u16 rgmii_tx_delay_mask) 528 { 529 u16 rgmii_rx_delay_pos = ffs(rgmii_rx_delay_mask) - 1; 530 u16 rgmii_tx_delay_pos = ffs(rgmii_tx_delay_mask) - 1; 531 int delay_size = ARRAY_SIZE(vsc85xx_internal_delay); 532 struct device *dev = &phydev->mdio.dev; 533 u16 reg_val = 0; 534 u16 mask = 0; 535 s32 rx_delay; 536 s32 tx_delay; 537 int rc = 0; 538 539 /* For traffic to pass, the VSC8502 family needs the RX_CLK disable bit 540 * to be unset for all PHY modes, so do that as part of the paged 541 * register modification. 542 * For some family members (like VSC8530/31/40/41) this bit is reserved 543 * and read-only, and the RX clock is enabled by default. 544 */ 545 if (rgmii_cntl == VSC8502_RGMII_CNTL) 546 mask |= VSC8502_RGMII_RX_CLK_DISABLE; 547 548 if (phy_interface_is_rgmii(phydev)) 549 mask |= rgmii_rx_delay_mask | rgmii_tx_delay_mask; 550 551 rx_delay = phy_get_internal_delay(phydev, dev, vsc85xx_internal_delay, 552 delay_size, true); 553 if (rx_delay < 0) { 554 if (phydev->interface == PHY_INTERFACE_MODE_RGMII_RXID || 555 phydev->interface == PHY_INTERFACE_MODE_RGMII_ID) 556 rx_delay = RGMII_CLK_DELAY_2_0_NS; 557 else 558 rx_delay = RGMII_CLK_DELAY_0_2_NS; 559 } 560 561 tx_delay = phy_get_internal_delay(phydev, dev, vsc85xx_internal_delay, 562 delay_size, false); 563 if (tx_delay < 0) { 564 if (phydev->interface == PHY_INTERFACE_MODE_RGMII_TXID || 565 phydev->interface == PHY_INTERFACE_MODE_RGMII_ID) 566 tx_delay = RGMII_CLK_DELAY_2_0_NS; 567 else 568 tx_delay = RGMII_CLK_DELAY_0_2_NS; 569 } 570 571 reg_val |= rx_delay << rgmii_rx_delay_pos; 572 reg_val |= tx_delay << rgmii_tx_delay_pos; 573 574 if (mask) 575 rc = phy_modify_paged(phydev, MSCC_PHY_PAGE_EXTENDED_2, 576 rgmii_cntl, mask, reg_val); 577 578 return rc; 579 } 580 581 static int vsc85xx_default_config(struct phy_device *phydev) 582 { 583 phydev->mdix_ctrl = ETH_TP_MDI_AUTO; 584 585 return vsc85xx_update_rgmii_cntl(phydev, VSC8502_RGMII_CNTL, 586 VSC8502_RGMII_RX_DELAY_MASK, 587 VSC8502_RGMII_TX_DELAY_MASK); 588 } 589 590 static int vsc85xx_get_tunable(struct phy_device *phydev, 591 struct ethtool_tunable *tuna, void *data) 592 { 593 switch (tuna->id) { 594 case ETHTOOL_PHY_DOWNSHIFT: 595 return vsc85xx_downshift_get(phydev, (u8 *)data); 596 default: 597 return -EINVAL; 598 } 599 } 600 601 static int vsc85xx_set_tunable(struct phy_device *phydev, 602 struct ethtool_tunable *tuna, 603 const void *data) 604 { 605 switch (tuna->id) { 606 case ETHTOOL_PHY_DOWNSHIFT: 607 return vsc85xx_downshift_set(phydev, *(u8 *)data); 608 default: 609 return -EINVAL; 610 } 611 } 612 613 /* mdiobus lock should be locked when using this function */ 614 static void vsc85xx_tr_write(struct phy_device *phydev, u16 addr, u32 val) 615 { 616 __phy_write(phydev, MSCC_PHY_TR_MSB, val >> 16); 617 __phy_write(phydev, MSCC_PHY_TR_LSB, val & GENMASK(15, 0)); 618 __phy_write(phydev, MSCC_PHY_TR_CNTL, TR_WRITE | TR_ADDR(addr)); 619 } 620 621 static int vsc8531_pre_init_seq_set(struct phy_device *phydev) 622 { 623 int rc; 624 static const struct reg_val init_seq[] = { 625 {0x0f90, 0x00688980}, 626 {0x0696, 0x00000003}, 627 {0x07fa, 0x0050100f}, 628 {0x1686, 0x00000004}, 629 }; 630 unsigned int i; 631 int oldpage; 632 633 rc = phy_modify_paged(phydev, MSCC_PHY_PAGE_STANDARD, 634 MSCC_PHY_EXT_CNTL_STATUS, SMI_BROADCAST_WR_EN, 635 SMI_BROADCAST_WR_EN); 636 if (rc < 0) 637 return rc; 638 rc = phy_modify_paged(phydev, MSCC_PHY_PAGE_TEST, 639 MSCC_PHY_TEST_PAGE_24, 0, 0x0400); 640 if (rc < 0) 641 return rc; 642 rc = phy_modify_paged(phydev, MSCC_PHY_PAGE_TEST, 643 MSCC_PHY_TEST_PAGE_5, 0x0a00, 0x0e00); 644 if (rc < 0) 645 return rc; 646 rc = phy_modify_paged(phydev, MSCC_PHY_PAGE_TEST, 647 MSCC_PHY_TEST_PAGE_8, TR_CLK_DISABLE, TR_CLK_DISABLE); 648 if (rc < 0) 649 return rc; 650 651 mutex_lock(&phydev->lock); 652 oldpage = phy_select_page(phydev, MSCC_PHY_PAGE_TR); 653 if (oldpage < 0) 654 goto out_unlock; 655 656 for (i = 0; i < ARRAY_SIZE(init_seq); i++) 657 vsc85xx_tr_write(phydev, init_seq[i].reg, init_seq[i].val); 658 659 out_unlock: 660 oldpage = phy_restore_page(phydev, oldpage, oldpage); 661 mutex_unlock(&phydev->lock); 662 663 return oldpage; 664 } 665 666 static int vsc85xx_eee_init_seq_set(struct phy_device *phydev) 667 { 668 static const struct reg_val init_eee[] = { 669 {0x0f82, 0x0012b00a}, 670 {0x1686, 0x00000004}, 671 {0x168c, 0x00d2c46f}, 672 {0x17a2, 0x00000620}, 673 {0x16a0, 0x00eeffdd}, 674 {0x16a6, 0x00071448}, 675 {0x16a4, 0x0013132f}, 676 {0x16a8, 0x00000000}, 677 {0x0ffc, 0x00c0a028}, 678 {0x0fe8, 0x0091b06c}, 679 {0x0fea, 0x00041600}, 680 {0x0f80, 0x00000af4}, 681 {0x0fec, 0x00901809}, 682 {0x0fee, 0x0000a6a1}, 683 {0x0ffe, 0x00b01007}, 684 {0x16b0, 0x00eeff00}, 685 {0x16b2, 0x00007000}, 686 {0x16b4, 0x00000814}, 687 }; 688 unsigned int i; 689 int oldpage; 690 691 mutex_lock(&phydev->lock); 692 oldpage = phy_select_page(phydev, MSCC_PHY_PAGE_TR); 693 if (oldpage < 0) 694 goto out_unlock; 695 696 for (i = 0; i < ARRAY_SIZE(init_eee); i++) 697 vsc85xx_tr_write(phydev, init_eee[i].reg, init_eee[i].val); 698 699 out_unlock: 700 oldpage = phy_restore_page(phydev, oldpage, oldpage); 701 mutex_unlock(&phydev->lock); 702 703 return oldpage; 704 } 705 706 /* phydev->bus->mdio_lock should be locked when using this function */ 707 int phy_base_write(struct phy_device *phydev, u32 regnum, u16 val) 708 { 709 if (unlikely(!mutex_is_locked(&phydev->mdio.bus->mdio_lock))) { 710 dev_err(&phydev->mdio.dev, "MDIO bus lock not held!\n"); 711 dump_stack(); 712 } 713 714 return __phy_package_write(phydev, VSC88XX_BASE_ADDR, regnum, val); 715 } 716 717 /* phydev->bus->mdio_lock should be locked when using this function */ 718 int phy_base_read(struct phy_device *phydev, u32 regnum) 719 { 720 if (unlikely(!mutex_is_locked(&phydev->mdio.bus->mdio_lock))) { 721 dev_err(&phydev->mdio.dev, "MDIO bus lock not held!\n"); 722 dump_stack(); 723 } 724 725 return __phy_package_read(phydev, VSC88XX_BASE_ADDR, regnum); 726 } 727 728 u32 vsc85xx_csr_read(struct phy_device *phydev, 729 enum csr_target target, u32 reg) 730 { 731 unsigned long deadline; 732 u32 val, val_l, val_h; 733 734 phy_base_write(phydev, MSCC_EXT_PAGE_ACCESS, MSCC_PHY_PAGE_CSR_CNTL); 735 736 /* CSR registers are grouped under different Target IDs. 737 * 6-bit Target_ID is split between MSCC_EXT_PAGE_CSR_CNTL_20 and 738 * MSCC_EXT_PAGE_CSR_CNTL_19 registers. 739 * Target_ID[5:2] maps to bits[3:0] of MSCC_EXT_PAGE_CSR_CNTL_20 740 * and Target_ID[1:0] maps to bits[13:12] of MSCC_EXT_PAGE_CSR_CNTL_19. 741 */ 742 743 /* Setup the Target ID */ 744 phy_base_write(phydev, MSCC_EXT_PAGE_CSR_CNTL_20, 745 MSCC_PHY_CSR_CNTL_20_TARGET(target >> 2)); 746 747 if ((target >> 2 == 0x1) || (target >> 2 == 0x3)) 748 /* non-MACsec access */ 749 target &= 0x3; 750 else 751 target = 0; 752 753 /* Trigger CSR Action - Read into the CSR's */ 754 phy_base_write(phydev, MSCC_EXT_PAGE_CSR_CNTL_19, 755 MSCC_PHY_CSR_CNTL_19_CMD | MSCC_PHY_CSR_CNTL_19_READ | 756 MSCC_PHY_CSR_CNTL_19_REG_ADDR(reg) | 757 MSCC_PHY_CSR_CNTL_19_TARGET(target)); 758 759 /* Wait for register access*/ 760 deadline = jiffies + msecs_to_jiffies(PROC_CMD_NCOMPLETED_TIMEOUT_MS); 761 do { 762 usleep_range(500, 1000); 763 val = phy_base_read(phydev, MSCC_EXT_PAGE_CSR_CNTL_19); 764 } while (time_before(jiffies, deadline) && 765 !(val & MSCC_PHY_CSR_CNTL_19_CMD)); 766 767 if (!(val & MSCC_PHY_CSR_CNTL_19_CMD)) 768 return 0xffffffff; 769 770 /* Read the Least Significant Word (LSW) (17) */ 771 val_l = phy_base_read(phydev, MSCC_EXT_PAGE_CSR_CNTL_17); 772 773 /* Read the Most Significant Word (MSW) (18) */ 774 val_h = phy_base_read(phydev, MSCC_EXT_PAGE_CSR_CNTL_18); 775 776 phy_base_write(phydev, MSCC_EXT_PAGE_ACCESS, 777 MSCC_PHY_PAGE_STANDARD); 778 779 return (val_h << 16) | val_l; 780 } 781 782 int vsc85xx_csr_write(struct phy_device *phydev, 783 enum csr_target target, u32 reg, u32 val) 784 { 785 unsigned long deadline; 786 787 phy_base_write(phydev, MSCC_EXT_PAGE_ACCESS, MSCC_PHY_PAGE_CSR_CNTL); 788 789 /* CSR registers are grouped under different Target IDs. 790 * 6-bit Target_ID is split between MSCC_EXT_PAGE_CSR_CNTL_20 and 791 * MSCC_EXT_PAGE_CSR_CNTL_19 registers. 792 * Target_ID[5:2] maps to bits[3:0] of MSCC_EXT_PAGE_CSR_CNTL_20 793 * and Target_ID[1:0] maps to bits[13:12] of MSCC_EXT_PAGE_CSR_CNTL_19. 794 */ 795 796 /* Setup the Target ID */ 797 phy_base_write(phydev, MSCC_EXT_PAGE_CSR_CNTL_20, 798 MSCC_PHY_CSR_CNTL_20_TARGET(target >> 2)); 799 800 /* Write the Least Significant Word (LSW) (17) */ 801 phy_base_write(phydev, MSCC_EXT_PAGE_CSR_CNTL_17, (u16)val); 802 803 /* Write the Most Significant Word (MSW) (18) */ 804 phy_base_write(phydev, MSCC_EXT_PAGE_CSR_CNTL_18, (u16)(val >> 16)); 805 806 if ((target >> 2 == 0x1) || (target >> 2 == 0x3)) 807 /* non-MACsec access */ 808 target &= 0x3; 809 else 810 target = 0; 811 812 /* Trigger CSR Action - Write into the CSR's */ 813 phy_base_write(phydev, MSCC_EXT_PAGE_CSR_CNTL_19, 814 MSCC_PHY_CSR_CNTL_19_CMD | 815 MSCC_PHY_CSR_CNTL_19_REG_ADDR(reg) | 816 MSCC_PHY_CSR_CNTL_19_TARGET(target)); 817 818 /* Wait for register access */ 819 deadline = jiffies + msecs_to_jiffies(PROC_CMD_NCOMPLETED_TIMEOUT_MS); 820 do { 821 usleep_range(500, 1000); 822 val = phy_base_read(phydev, MSCC_EXT_PAGE_CSR_CNTL_19); 823 } while (time_before(jiffies, deadline) && 824 !(val & MSCC_PHY_CSR_CNTL_19_CMD)); 825 826 if (!(val & MSCC_PHY_CSR_CNTL_19_CMD)) 827 return -ETIMEDOUT; 828 829 phy_base_write(phydev, MSCC_EXT_PAGE_ACCESS, 830 MSCC_PHY_PAGE_STANDARD); 831 832 return 0; 833 } 834 835 /* bus->mdio_lock should be locked when using this function */ 836 static void vsc8584_csr_write(struct phy_device *phydev, u16 addr, u32 val) 837 { 838 phy_base_write(phydev, MSCC_PHY_TR_MSB, val >> 16); 839 phy_base_write(phydev, MSCC_PHY_TR_LSB, val & GENMASK(15, 0)); 840 phy_base_write(phydev, MSCC_PHY_TR_CNTL, TR_WRITE | TR_ADDR(addr)); 841 } 842 843 /* bus->mdio_lock should be locked when using this function */ 844 int vsc8584_cmd(struct phy_device *phydev, u16 val) 845 { 846 unsigned long deadline; 847 u16 reg_val; 848 849 phy_base_write(phydev, MSCC_EXT_PAGE_ACCESS, 850 MSCC_PHY_PAGE_EXTENDED_GPIO); 851 852 phy_base_write(phydev, MSCC_PHY_PROC_CMD, PROC_CMD_NCOMPLETED | val); 853 854 deadline = jiffies + msecs_to_jiffies(PROC_CMD_NCOMPLETED_TIMEOUT_MS); 855 do { 856 reg_val = phy_base_read(phydev, MSCC_PHY_PROC_CMD); 857 } while (time_before(jiffies, deadline) && 858 (reg_val & PROC_CMD_NCOMPLETED) && 859 !(reg_val & PROC_CMD_FAILED)); 860 861 phy_base_write(phydev, MSCC_EXT_PAGE_ACCESS, MSCC_PHY_PAGE_STANDARD); 862 863 if (reg_val & PROC_CMD_FAILED) 864 return -EIO; 865 866 if (reg_val & PROC_CMD_NCOMPLETED) 867 return -ETIMEDOUT; 868 869 return 0; 870 } 871 872 /* bus->mdio_lock should be locked when using this function */ 873 static int vsc8584_micro_deassert_reset(struct phy_device *phydev, 874 bool patch_en) 875 { 876 u32 enable, release; 877 878 phy_base_write(phydev, MSCC_EXT_PAGE_ACCESS, 879 MSCC_PHY_PAGE_EXTENDED_GPIO); 880 881 enable = RUN_FROM_INT_ROM | MICRO_CLK_EN | DW8051_CLK_EN; 882 release = MICRO_NSOFT_RESET | RUN_FROM_INT_ROM | DW8051_CLK_EN | 883 MICRO_CLK_EN; 884 885 if (patch_en) { 886 enable |= MICRO_PATCH_EN; 887 release |= MICRO_PATCH_EN; 888 889 /* Clear all patches */ 890 phy_base_write(phydev, MSCC_INT_MEM_CNTL, READ_RAM); 891 } 892 893 /* Enable 8051 Micro clock; CLEAR/SET patch present; disable PRAM clock 894 * override and addr. auto-incr; operate at 125 MHz 895 */ 896 phy_base_write(phydev, MSCC_DW8051_CNTL_STATUS, enable); 897 /* Release 8051 Micro SW reset */ 898 phy_base_write(phydev, MSCC_DW8051_CNTL_STATUS, release); 899 900 phy_base_write(phydev, MSCC_EXT_PAGE_ACCESS, MSCC_PHY_PAGE_STANDARD); 901 902 return 0; 903 } 904 905 /* bus->mdio_lock should be locked when using this function */ 906 static int vsc8584_micro_assert_reset(struct phy_device *phydev) 907 { 908 int ret; 909 u16 reg; 910 911 ret = vsc8584_cmd(phydev, PROC_CMD_NOP); 912 if (ret) 913 return ret; 914 915 phy_base_write(phydev, MSCC_EXT_PAGE_ACCESS, 916 MSCC_PHY_PAGE_EXTENDED_GPIO); 917 918 reg = phy_base_read(phydev, MSCC_INT_MEM_CNTL); 919 reg &= ~EN_PATCH_RAM_TRAP_ADDR(4); 920 phy_base_write(phydev, MSCC_INT_MEM_CNTL, reg); 921 922 phy_base_write(phydev, MSCC_TRAP_ROM_ADDR(4), 0x005b); 923 phy_base_write(phydev, MSCC_PATCH_RAM_ADDR(4), 0x005b); 924 925 reg = phy_base_read(phydev, MSCC_INT_MEM_CNTL); 926 reg |= EN_PATCH_RAM_TRAP_ADDR(4); 927 phy_base_write(phydev, MSCC_INT_MEM_CNTL, reg); 928 929 phy_base_write(phydev, MSCC_PHY_PROC_CMD, PROC_CMD_NOP); 930 931 reg = phy_base_read(phydev, MSCC_DW8051_CNTL_STATUS); 932 reg &= ~MICRO_NSOFT_RESET; 933 phy_base_write(phydev, MSCC_DW8051_CNTL_STATUS, reg); 934 935 phy_base_write(phydev, MSCC_PHY_PROC_CMD, PROC_CMD_MCB_ACCESS_MAC_CONF | 936 PROC_CMD_SGMII_PORT(0) | PROC_CMD_NO_MAC_CONF | 937 PROC_CMD_READ); 938 939 reg = phy_base_read(phydev, MSCC_INT_MEM_CNTL); 940 reg &= ~EN_PATCH_RAM_TRAP_ADDR(4); 941 phy_base_write(phydev, MSCC_INT_MEM_CNTL, reg); 942 943 phy_base_write(phydev, MSCC_EXT_PAGE_ACCESS, MSCC_PHY_PAGE_STANDARD); 944 945 return 0; 946 } 947 948 /* bus->mdio_lock should be locked when using this function */ 949 static int vsc8584_get_fw_crc(struct phy_device *phydev, u16 start, u16 size, 950 u16 *crc) 951 { 952 int ret; 953 954 phy_base_write(phydev, MSCC_EXT_PAGE_ACCESS, MSCC_PHY_PAGE_EXTENDED); 955 956 phy_base_write(phydev, MSCC_PHY_VERIPHY_CNTL_2, start); 957 phy_base_write(phydev, MSCC_PHY_VERIPHY_CNTL_3, size); 958 959 /* Start Micro command */ 960 ret = vsc8584_cmd(phydev, PROC_CMD_CRC16); 961 if (ret) 962 goto out; 963 964 phy_base_write(phydev, MSCC_EXT_PAGE_ACCESS, MSCC_PHY_PAGE_EXTENDED); 965 966 *crc = phy_base_read(phydev, MSCC_PHY_VERIPHY_CNTL_2); 967 968 out: 969 phy_base_write(phydev, MSCC_EXT_PAGE_ACCESS, MSCC_PHY_PAGE_STANDARD); 970 971 return ret; 972 } 973 974 /* bus->mdio_lock should be locked when using this function */ 975 static int vsc8584_patch_fw(struct phy_device *phydev, 976 const struct firmware *fw) 977 { 978 int i, ret; 979 980 ret = vsc8584_micro_assert_reset(phydev); 981 if (ret) { 982 dev_err(&phydev->mdio.dev, 983 "%s: failed to assert reset of micro\n", __func__); 984 return ret; 985 } 986 987 phy_base_write(phydev, MSCC_EXT_PAGE_ACCESS, 988 MSCC_PHY_PAGE_EXTENDED_GPIO); 989 990 /* Hold 8051 Micro in SW Reset, Enable auto incr address and patch clock 991 * Disable the 8051 Micro clock 992 */ 993 phy_base_write(phydev, MSCC_DW8051_CNTL_STATUS, RUN_FROM_INT_ROM | 994 AUTOINC_ADDR | PATCH_RAM_CLK | MICRO_CLK_EN | 995 MICRO_CLK_DIVIDE(2)); 996 phy_base_write(phydev, MSCC_INT_MEM_CNTL, READ_PRAM | INT_MEM_WRITE_EN | 997 INT_MEM_DATA(2)); 998 phy_base_write(phydev, MSCC_INT_MEM_ADDR, 0x0000); 999 1000 for (i = 0; i < fw->size; i++) 1001 phy_base_write(phydev, MSCC_INT_MEM_CNTL, READ_PRAM | 1002 INT_MEM_WRITE_EN | fw->data[i]); 1003 1004 /* Clear internal memory access */ 1005 phy_base_write(phydev, MSCC_INT_MEM_CNTL, READ_RAM); 1006 1007 phy_base_write(phydev, MSCC_EXT_PAGE_ACCESS, MSCC_PHY_PAGE_STANDARD); 1008 1009 return 0; 1010 } 1011 1012 /* bus->mdio_lock should be locked when using this function */ 1013 static bool vsc8574_is_serdes_init(struct phy_device *phydev) 1014 { 1015 u16 reg; 1016 bool ret; 1017 1018 phy_base_write(phydev, MSCC_EXT_PAGE_ACCESS, 1019 MSCC_PHY_PAGE_EXTENDED_GPIO); 1020 1021 reg = phy_base_read(phydev, MSCC_TRAP_ROM_ADDR(1)); 1022 if (reg != 0x3eb7) { 1023 ret = false; 1024 goto out; 1025 } 1026 1027 reg = phy_base_read(phydev, MSCC_PATCH_RAM_ADDR(1)); 1028 if (reg != 0x4012) { 1029 ret = false; 1030 goto out; 1031 } 1032 1033 reg = phy_base_read(phydev, MSCC_INT_MEM_CNTL); 1034 if (reg != EN_PATCH_RAM_TRAP_ADDR(1)) { 1035 ret = false; 1036 goto out; 1037 } 1038 1039 reg = phy_base_read(phydev, MSCC_DW8051_CNTL_STATUS); 1040 if ((MICRO_NSOFT_RESET | RUN_FROM_INT_ROM | DW8051_CLK_EN | 1041 MICRO_CLK_EN) != (reg & MSCC_DW8051_VLD_MASK)) { 1042 ret = false; 1043 goto out; 1044 } 1045 1046 ret = true; 1047 out: 1048 phy_base_write(phydev, MSCC_EXT_PAGE_ACCESS, MSCC_PHY_PAGE_STANDARD); 1049 1050 return ret; 1051 } 1052 1053 /* bus->mdio_lock should be locked when using this function */ 1054 static int vsc8574_config_pre_init(struct phy_device *phydev) 1055 { 1056 static const struct reg_val pre_init1[] = { 1057 {0x0fae, 0x000401bd}, 1058 {0x0fac, 0x000f000f}, 1059 {0x17a0, 0x00a0f147}, 1060 {0x0fe4, 0x00052f54}, 1061 {0x1792, 0x0027303d}, 1062 {0x07fe, 0x00000704}, 1063 {0x0fe0, 0x00060150}, 1064 {0x0f82, 0x0012b00a}, 1065 {0x0f80, 0x00000d74}, 1066 {0x02e0, 0x00000012}, 1067 {0x03a2, 0x00050208}, 1068 {0x03b2, 0x00009186}, 1069 {0x0fb0, 0x000e3700}, 1070 {0x1688, 0x00049f81}, 1071 {0x0fd2, 0x0000ffff}, 1072 {0x168a, 0x00039fa2}, 1073 {0x1690, 0x0020640b}, 1074 {0x0258, 0x00002220}, 1075 {0x025a, 0x00002a20}, 1076 {0x025c, 0x00003060}, 1077 {0x025e, 0x00003fa0}, 1078 {0x03a6, 0x0000e0f0}, 1079 {0x0f92, 0x00001489}, 1080 {0x16a2, 0x00007000}, 1081 {0x16a6, 0x00071448}, 1082 {0x16a0, 0x00eeffdd}, 1083 {0x0fe8, 0x0091b06c}, 1084 {0x0fea, 0x00041600}, 1085 {0x16b0, 0x00eeff00}, 1086 {0x16b2, 0x00007000}, 1087 {0x16b4, 0x00000814}, 1088 {0x0f90, 0x00688980}, 1089 {0x03a4, 0x0000d8f0}, 1090 {0x0fc0, 0x00000400}, 1091 {0x07fa, 0x0050100f}, 1092 {0x0796, 0x00000003}, 1093 {0x07f8, 0x00c3ff98}, 1094 {0x0fa4, 0x0018292a}, 1095 {0x168c, 0x00d2c46f}, 1096 {0x17a2, 0x00000620}, 1097 {0x16a4, 0x0013132f}, 1098 {0x16a8, 0x00000000}, 1099 {0x0ffc, 0x00c0a028}, 1100 {0x0fec, 0x00901c09}, 1101 {0x0fee, 0x0004a6a1}, 1102 {0x0ffe, 0x00b01807}, 1103 }; 1104 static const struct reg_val pre_init2[] = { 1105 {0x0486, 0x0008a518}, 1106 {0x0488, 0x006dc696}, 1107 {0x048a, 0x00000912}, 1108 {0x048e, 0x00000db6}, 1109 {0x049c, 0x00596596}, 1110 {0x049e, 0x00000514}, 1111 {0x04a2, 0x00410280}, 1112 {0x04a4, 0x00000000}, 1113 {0x04a6, 0x00000000}, 1114 {0x04a8, 0x00000000}, 1115 {0x04aa, 0x00000000}, 1116 {0x04ae, 0x007df7dd}, 1117 {0x04b0, 0x006d95d4}, 1118 {0x04b2, 0x00492410}, 1119 }; 1120 struct device *dev = &phydev->mdio.dev; 1121 const struct firmware *fw; 1122 unsigned int i; 1123 u16 crc, reg; 1124 bool serdes_init; 1125 int ret; 1126 1127 phy_base_write(phydev, MSCC_EXT_PAGE_ACCESS, MSCC_PHY_PAGE_STANDARD); 1128 1129 /* all writes below are broadcasted to all PHYs in the same package */ 1130 reg = phy_base_read(phydev, MSCC_PHY_EXT_CNTL_STATUS); 1131 reg |= SMI_BROADCAST_WR_EN; 1132 phy_base_write(phydev, MSCC_PHY_EXT_CNTL_STATUS, reg); 1133 1134 phy_base_write(phydev, MII_VSC85XX_INT_MASK, 0); 1135 1136 /* The below register writes are tweaking analog and electrical 1137 * configuration that were determined through characterization by PHY 1138 * engineers. These don't mean anything more than "these are the best 1139 * values". 1140 */ 1141 phy_base_write(phydev, MSCC_PHY_EXT_PHY_CNTL_2, 0x0040); 1142 1143 phy_base_write(phydev, MSCC_EXT_PAGE_ACCESS, MSCC_PHY_PAGE_TEST); 1144 1145 phy_base_write(phydev, MSCC_PHY_TEST_PAGE_20, 0x4320); 1146 phy_base_write(phydev, MSCC_PHY_TEST_PAGE_24, 0x0c00); 1147 phy_base_write(phydev, MSCC_PHY_TEST_PAGE_9, 0x18ca); 1148 phy_base_write(phydev, MSCC_PHY_TEST_PAGE_5, 0x1b20); 1149 1150 reg = phy_base_read(phydev, MSCC_PHY_TEST_PAGE_8); 1151 reg |= TR_CLK_DISABLE; 1152 phy_base_write(phydev, MSCC_PHY_TEST_PAGE_8, reg); 1153 1154 phy_base_write(phydev, MSCC_EXT_PAGE_ACCESS, MSCC_PHY_PAGE_TR); 1155 1156 for (i = 0; i < ARRAY_SIZE(pre_init1); i++) 1157 vsc8584_csr_write(phydev, pre_init1[i].reg, pre_init1[i].val); 1158 1159 phy_base_write(phydev, MSCC_EXT_PAGE_ACCESS, MSCC_PHY_PAGE_EXTENDED_2); 1160 1161 phy_base_write(phydev, MSCC_PHY_CU_PMD_TX_CNTL, 0x028e); 1162 1163 phy_base_write(phydev, MSCC_EXT_PAGE_ACCESS, MSCC_PHY_PAGE_TR); 1164 1165 for (i = 0; i < ARRAY_SIZE(pre_init2); i++) 1166 vsc8584_csr_write(phydev, pre_init2[i].reg, pre_init2[i].val); 1167 1168 phy_base_write(phydev, MSCC_EXT_PAGE_ACCESS, MSCC_PHY_PAGE_TEST); 1169 1170 reg = phy_base_read(phydev, MSCC_PHY_TEST_PAGE_8); 1171 reg &= ~TR_CLK_DISABLE; 1172 phy_base_write(phydev, MSCC_PHY_TEST_PAGE_8, reg); 1173 1174 phy_base_write(phydev, MSCC_EXT_PAGE_ACCESS, MSCC_PHY_PAGE_STANDARD); 1175 1176 /* end of write broadcasting */ 1177 reg = phy_base_read(phydev, MSCC_PHY_EXT_CNTL_STATUS); 1178 reg &= ~SMI_BROADCAST_WR_EN; 1179 phy_base_write(phydev, MSCC_PHY_EXT_CNTL_STATUS, reg); 1180 1181 ret = request_firmware(&fw, MSCC_VSC8574_REVB_INT8051_FW, dev); 1182 if (ret) { 1183 dev_err(dev, "failed to load firmware %s, ret: %d\n", 1184 MSCC_VSC8574_REVB_INT8051_FW, ret); 1185 return ret; 1186 } 1187 1188 /* Add one byte to size for the one added by the patch_fw function */ 1189 ret = vsc8584_get_fw_crc(phydev, 1190 MSCC_VSC8574_REVB_INT8051_FW_START_ADDR, 1191 fw->size + 1, &crc); 1192 if (ret) 1193 goto out; 1194 1195 if (crc == MSCC_VSC8574_REVB_INT8051_FW_CRC) { 1196 serdes_init = vsc8574_is_serdes_init(phydev); 1197 1198 if (!serdes_init) { 1199 ret = vsc8584_micro_assert_reset(phydev); 1200 if (ret) { 1201 dev_err(dev, 1202 "%s: failed to assert reset of micro\n", 1203 __func__); 1204 goto out; 1205 } 1206 } 1207 } else { 1208 dev_dbg(dev, "FW CRC is not the expected one, patching FW\n"); 1209 1210 serdes_init = false; 1211 1212 if (vsc8584_patch_fw(phydev, fw)) 1213 dev_warn(dev, 1214 "failed to patch FW, expect non-optimal device\n"); 1215 } 1216 1217 if (!serdes_init) { 1218 phy_base_write(phydev, MSCC_EXT_PAGE_ACCESS, 1219 MSCC_PHY_PAGE_EXTENDED_GPIO); 1220 1221 phy_base_write(phydev, MSCC_TRAP_ROM_ADDR(1), 0x3eb7); 1222 phy_base_write(phydev, MSCC_PATCH_RAM_ADDR(1), 0x4012); 1223 phy_base_write(phydev, MSCC_INT_MEM_CNTL, 1224 EN_PATCH_RAM_TRAP_ADDR(1)); 1225 1226 vsc8584_micro_deassert_reset(phydev, false); 1227 1228 /* Add one byte to size for the one added by the patch_fw 1229 * function 1230 */ 1231 ret = vsc8584_get_fw_crc(phydev, 1232 MSCC_VSC8574_REVB_INT8051_FW_START_ADDR, 1233 fw->size + 1, &crc); 1234 if (ret) 1235 goto out; 1236 1237 if (crc != MSCC_VSC8574_REVB_INT8051_FW_CRC) 1238 dev_warn(dev, 1239 "FW CRC after patching is not the expected one, expect non-optimal device\n"); 1240 } 1241 1242 phy_base_write(phydev, MSCC_EXT_PAGE_ACCESS, 1243 MSCC_PHY_PAGE_EXTENDED_GPIO); 1244 1245 ret = vsc8584_cmd(phydev, PROC_CMD_1588_DEFAULT_INIT | 1246 PROC_CMD_PHY_INIT); 1247 1248 out: 1249 phy_base_write(phydev, MSCC_EXT_PAGE_ACCESS, MSCC_PHY_PAGE_STANDARD); 1250 1251 release_firmware(fw); 1252 1253 return ret; 1254 } 1255 1256 /* Access LCPLL Cfg_2 */ 1257 static void vsc8584_pll5g_cfg2_wr(struct phy_device *phydev, 1258 bool disable_fsm) 1259 { 1260 u32 rd_dat; 1261 1262 rd_dat = vsc85xx_csr_read(phydev, MACRO_CTRL, PHY_S6G_PLL5G_CFG2); 1263 rd_dat &= ~BIT(PHY_S6G_CFG2_FSM_DIS); 1264 rd_dat |= (disable_fsm << PHY_S6G_CFG2_FSM_DIS); 1265 vsc85xx_csr_write(phydev, MACRO_CTRL, PHY_S6G_PLL5G_CFG2, rd_dat); 1266 } 1267 1268 /* trigger a read to the spcified MCB */ 1269 static int vsc8584_mcb_rd_trig(struct phy_device *phydev, 1270 u32 mcb_reg_addr, u8 mcb_slave_num) 1271 { 1272 u32 rd_dat = 0; 1273 1274 /* read MCB */ 1275 vsc85xx_csr_write(phydev, MACRO_CTRL, mcb_reg_addr, 1276 (0x40000000 | (1L << mcb_slave_num))); 1277 1278 return read_poll_timeout(vsc85xx_csr_read, rd_dat, 1279 !(rd_dat & 0x40000000), 1280 4000, 200000, 0, 1281 phydev, MACRO_CTRL, mcb_reg_addr); 1282 } 1283 1284 /* trigger a write to the spcified MCB */ 1285 static int vsc8584_mcb_wr_trig(struct phy_device *phydev, 1286 u32 mcb_reg_addr, 1287 u8 mcb_slave_num) 1288 { 1289 u32 rd_dat = 0; 1290 1291 /* write back MCB */ 1292 vsc85xx_csr_write(phydev, MACRO_CTRL, mcb_reg_addr, 1293 (0x80000000 | (1L << mcb_slave_num))); 1294 1295 return read_poll_timeout(vsc85xx_csr_read, rd_dat, 1296 !(rd_dat & 0x80000000), 1297 4000, 200000, 0, 1298 phydev, MACRO_CTRL, mcb_reg_addr); 1299 } 1300 1301 /* Sequence to Reset LCPLL for the VIPER and ELISE PHY */ 1302 static int vsc8584_pll5g_reset(struct phy_device *phydev) 1303 { 1304 bool dis_fsm; 1305 int ret = 0; 1306 1307 ret = vsc8584_mcb_rd_trig(phydev, 0x11, 0); 1308 if (ret < 0) 1309 goto done; 1310 dis_fsm = 1; 1311 1312 /* Reset LCPLL */ 1313 vsc8584_pll5g_cfg2_wr(phydev, dis_fsm); 1314 1315 /* write back LCPLL MCB */ 1316 ret = vsc8584_mcb_wr_trig(phydev, 0x11, 0); 1317 if (ret < 0) 1318 goto done; 1319 1320 /* 10 mSec sleep while LCPLL is hold in reset */ 1321 usleep_range(10000, 20000); 1322 1323 /* read LCPLL MCB into CSRs */ 1324 ret = vsc8584_mcb_rd_trig(phydev, 0x11, 0); 1325 if (ret < 0) 1326 goto done; 1327 dis_fsm = 0; 1328 1329 /* Release the Reset of LCPLL */ 1330 vsc8584_pll5g_cfg2_wr(phydev, dis_fsm); 1331 1332 /* write back LCPLL MCB */ 1333 ret = vsc8584_mcb_wr_trig(phydev, 0x11, 0); 1334 if (ret < 0) 1335 goto done; 1336 1337 usleep_range(110000, 200000); 1338 done: 1339 return ret; 1340 } 1341 1342 /* bus->mdio_lock should be locked when using this function */ 1343 static int vsc8584_config_pre_init(struct phy_device *phydev) 1344 { 1345 static const struct reg_val pre_init1[] = { 1346 {0x07fa, 0x0050100f}, 1347 {0x1688, 0x00049f81}, 1348 {0x0f90, 0x00688980}, 1349 {0x03a4, 0x0000d8f0}, 1350 {0x0fc0, 0x00000400}, 1351 {0x0f82, 0x0012b002}, 1352 {0x1686, 0x00000004}, 1353 {0x168c, 0x00d2c46f}, 1354 {0x17a2, 0x00000620}, 1355 {0x16a0, 0x00eeffdd}, 1356 {0x16a6, 0x00071448}, 1357 {0x16a4, 0x0013132f}, 1358 {0x16a8, 0x00000000}, 1359 {0x0ffc, 0x00c0a028}, 1360 {0x0fe8, 0x0091b06c}, 1361 {0x0fea, 0x00041600}, 1362 {0x0f80, 0x00fffaff}, 1363 {0x0fec, 0x00901809}, 1364 {0x0ffe, 0x00b01007}, 1365 {0x16b0, 0x00eeff00}, 1366 {0x16b2, 0x00007000}, 1367 {0x16b4, 0x00000814}, 1368 }; 1369 static const struct reg_val pre_init2[] = { 1370 {0x0486, 0x0008a518}, 1371 {0x0488, 0x006dc696}, 1372 {0x048a, 0x00000912}, 1373 }; 1374 const struct firmware *fw; 1375 struct device *dev = &phydev->mdio.dev; 1376 unsigned int i; 1377 u16 crc, reg; 1378 int ret; 1379 1380 ret = vsc8584_pll5g_reset(phydev); 1381 if (ret < 0) { 1382 dev_err(dev, "failed LCPLL reset, ret: %d\n", ret); 1383 return ret; 1384 } 1385 1386 phy_base_write(phydev, MSCC_EXT_PAGE_ACCESS, MSCC_PHY_PAGE_STANDARD); 1387 1388 /* all writes below are broadcasted to all PHYs in the same package */ 1389 reg = phy_base_read(phydev, MSCC_PHY_EXT_CNTL_STATUS); 1390 reg |= SMI_BROADCAST_WR_EN; 1391 phy_base_write(phydev, MSCC_PHY_EXT_CNTL_STATUS, reg); 1392 1393 phy_base_write(phydev, MII_VSC85XX_INT_MASK, 0); 1394 1395 reg = phy_base_read(phydev, MSCC_PHY_BYPASS_CONTROL); 1396 reg |= PARALLEL_DET_IGNORE_ADVERTISED; 1397 phy_base_write(phydev, MSCC_PHY_BYPASS_CONTROL, reg); 1398 1399 /* The below register writes are tweaking analog and electrical 1400 * configuration that were determined through characterization by PHY 1401 * engineers. These don't mean anything more than "these are the best 1402 * values". 1403 */ 1404 phy_base_write(phydev, MSCC_EXT_PAGE_ACCESS, MSCC_PHY_PAGE_EXTENDED_3); 1405 1406 phy_base_write(phydev, MSCC_PHY_SERDES_TX_CRC_ERR_CNT, 0x2000); 1407 1408 phy_base_write(phydev, MSCC_EXT_PAGE_ACCESS, MSCC_PHY_PAGE_TEST); 1409 1410 phy_base_write(phydev, MSCC_PHY_TEST_PAGE_5, 0x1f20); 1411 1412 reg = phy_base_read(phydev, MSCC_PHY_TEST_PAGE_8); 1413 reg |= TR_CLK_DISABLE; 1414 phy_base_write(phydev, MSCC_PHY_TEST_PAGE_8, reg); 1415 1416 phy_base_write(phydev, MSCC_EXT_PAGE_ACCESS, MSCC_PHY_PAGE_TR); 1417 1418 phy_base_write(phydev, MSCC_PHY_TR_CNTL, TR_WRITE | TR_ADDR(0x2fa4)); 1419 1420 reg = phy_base_read(phydev, MSCC_PHY_TR_MSB); 1421 reg &= ~0x007f; 1422 reg |= 0x0019; 1423 phy_base_write(phydev, MSCC_PHY_TR_MSB, reg); 1424 1425 phy_base_write(phydev, MSCC_PHY_TR_CNTL, TR_WRITE | TR_ADDR(0x0fa4)); 1426 1427 for (i = 0; i < ARRAY_SIZE(pre_init1); i++) 1428 vsc8584_csr_write(phydev, pre_init1[i].reg, pre_init1[i].val); 1429 1430 phy_base_write(phydev, MSCC_EXT_PAGE_ACCESS, MSCC_PHY_PAGE_EXTENDED_2); 1431 1432 phy_base_write(phydev, MSCC_PHY_CU_PMD_TX_CNTL, 0x028e); 1433 1434 phy_base_write(phydev, MSCC_EXT_PAGE_ACCESS, MSCC_PHY_PAGE_TR); 1435 1436 for (i = 0; i < ARRAY_SIZE(pre_init2); i++) 1437 vsc8584_csr_write(phydev, pre_init2[i].reg, pre_init2[i].val); 1438 1439 phy_base_write(phydev, MSCC_EXT_PAGE_ACCESS, MSCC_PHY_PAGE_TEST); 1440 1441 reg = phy_base_read(phydev, MSCC_PHY_TEST_PAGE_8); 1442 reg &= ~TR_CLK_DISABLE; 1443 phy_base_write(phydev, MSCC_PHY_TEST_PAGE_8, reg); 1444 1445 phy_base_write(phydev, MSCC_EXT_PAGE_ACCESS, MSCC_PHY_PAGE_STANDARD); 1446 1447 /* end of write broadcasting */ 1448 reg = phy_base_read(phydev, MSCC_PHY_EXT_CNTL_STATUS); 1449 reg &= ~SMI_BROADCAST_WR_EN; 1450 phy_base_write(phydev, MSCC_PHY_EXT_CNTL_STATUS, reg); 1451 1452 ret = request_firmware(&fw, MSCC_VSC8584_REVB_INT8051_FW, dev); 1453 if (ret) { 1454 dev_err(dev, "failed to load firmware %s, ret: %d\n", 1455 MSCC_VSC8584_REVB_INT8051_FW, ret); 1456 return ret; 1457 } 1458 1459 /* Add one byte to size for the one added by the patch_fw function */ 1460 ret = vsc8584_get_fw_crc(phydev, 1461 MSCC_VSC8584_REVB_INT8051_FW_START_ADDR, 1462 fw->size + 1, &crc); 1463 if (ret) 1464 goto out; 1465 1466 if (crc != MSCC_VSC8584_REVB_INT8051_FW_CRC) { 1467 dev_dbg(dev, "FW CRC is not the expected one, patching FW\n"); 1468 if (vsc8584_patch_fw(phydev, fw)) 1469 dev_warn(dev, 1470 "failed to patch FW, expect non-optimal device\n"); 1471 } 1472 1473 vsc8584_micro_deassert_reset(phydev, false); 1474 1475 /* Add one byte to size for the one added by the patch_fw function */ 1476 ret = vsc8584_get_fw_crc(phydev, 1477 MSCC_VSC8584_REVB_INT8051_FW_START_ADDR, 1478 fw->size + 1, &crc); 1479 if (ret) 1480 goto out; 1481 1482 if (crc != MSCC_VSC8584_REVB_INT8051_FW_CRC) 1483 dev_warn(dev, 1484 "FW CRC after patching is not the expected one, expect non-optimal device\n"); 1485 1486 ret = vsc8584_micro_assert_reset(phydev); 1487 if (ret) 1488 goto out; 1489 1490 /* Write patch vector 0, to skip IB cal polling */ 1491 phy_base_write(phydev, MSCC_EXT_PAGE_ACCESS, MSCC_PHY_PAGE_EXTENDED_GPIO); 1492 reg = MSCC_ROM_TRAP_SERDES_6G_CFG; /* ROM address to trap, for patch vector 0 */ 1493 ret = phy_base_write(phydev, MSCC_TRAP_ROM_ADDR(1), reg); 1494 if (ret) 1495 goto out; 1496 1497 reg = MSCC_RAM_TRAP_SERDES_6G_CFG; /* RAM address to jump to, when patch vector 0 enabled */ 1498 ret = phy_base_write(phydev, MSCC_PATCH_RAM_ADDR(1), reg); 1499 if (ret) 1500 goto out; 1501 1502 reg = phy_base_read(phydev, MSCC_INT_MEM_CNTL); 1503 reg |= PATCH_VEC_ZERO_EN; /* bit 8, enable patch vector 0 */ 1504 ret = phy_base_write(phydev, MSCC_INT_MEM_CNTL, reg); 1505 if (ret) 1506 goto out; 1507 1508 vsc8584_micro_deassert_reset(phydev, true); 1509 1510 out: 1511 phy_base_write(phydev, MSCC_EXT_PAGE_ACCESS, MSCC_PHY_PAGE_STANDARD); 1512 1513 release_firmware(fw); 1514 1515 return ret; 1516 } 1517 1518 static void vsc8584_get_base_addr(struct phy_device *phydev) 1519 { 1520 struct vsc8531_private *vsc8531 = phydev->priv; 1521 u16 val, addr; 1522 1523 phy_lock_mdio_bus(phydev); 1524 __phy_write(phydev, MSCC_EXT_PAGE_ACCESS, MSCC_PHY_PAGE_EXTENDED); 1525 1526 addr = __phy_read(phydev, MSCC_PHY_EXT_PHY_CNTL_4); 1527 addr >>= PHY_CNTL_4_ADDR_POS; 1528 1529 val = __phy_read(phydev, MSCC_PHY_ACTIPHY_CNTL); 1530 1531 __phy_write(phydev, MSCC_EXT_PAGE_ACCESS, MSCC_PHY_PAGE_STANDARD); 1532 phy_unlock_mdio_bus(phydev); 1533 1534 /* In the package, there are two pairs of PHYs (PHY0 + PHY2 and 1535 * PHY1 + PHY3). The first PHY of each pair (PHY0 and PHY1) is 1536 * the base PHY for timestamping operations. 1537 */ 1538 vsc8531->ts_base_addr = phydev->mdio.addr; 1539 vsc8531->ts_base_phy = addr; 1540 1541 if (val & PHY_ADDR_REVERSED) { 1542 vsc8531->base_addr = phydev->mdio.addr + addr; 1543 if (addr > 1) { 1544 vsc8531->ts_base_addr += 2; 1545 vsc8531->ts_base_phy += 2; 1546 } 1547 } else { 1548 vsc8531->base_addr = phydev->mdio.addr - addr; 1549 if (addr > 1) { 1550 vsc8531->ts_base_addr -= 2; 1551 vsc8531->ts_base_phy -= 2; 1552 } 1553 } 1554 1555 vsc8531->addr = addr; 1556 } 1557 1558 static void vsc85xx_coma_mode_release(struct phy_device *phydev) 1559 { 1560 /* The coma mode (pin or reg) provides an optional feature that 1561 * may be used to control when the PHYs become active. 1562 * Alternatively the COMA_MODE pin may be connected low 1563 * so that the PHYs are fully active once out of reset. 1564 */ 1565 1566 /* Enable output (mode=0) and write zero to it */ 1567 vsc85xx_phy_write_page(phydev, MSCC_PHY_PAGE_EXTENDED_GPIO); 1568 __phy_modify(phydev, MSCC_PHY_GPIO_CONTROL_2, 1569 MSCC_PHY_COMA_MODE | MSCC_PHY_COMA_OUTPUT, 0); 1570 vsc85xx_phy_write_page(phydev, MSCC_PHY_PAGE_STANDARD); 1571 } 1572 1573 static int vsc8584_config_host_serdes(struct phy_device *phydev) 1574 { 1575 struct vsc8531_private *vsc8531 = phydev->priv; 1576 int ret; 1577 u16 val; 1578 1579 ret = phy_base_write(phydev, MSCC_EXT_PAGE_ACCESS, 1580 MSCC_PHY_PAGE_EXTENDED_GPIO); 1581 if (ret) 1582 return ret; 1583 1584 val = phy_base_read(phydev, MSCC_PHY_MAC_CFG_FASTLINK); 1585 val &= ~MAC_CFG_MASK; 1586 if (phydev->interface == PHY_INTERFACE_MODE_QSGMII) { 1587 val |= MAC_CFG_QSGMII; 1588 } else if (phydev->interface == PHY_INTERFACE_MODE_SGMII) { 1589 val |= MAC_CFG_SGMII; 1590 } else { 1591 ret = -EINVAL; 1592 return ret; 1593 } 1594 1595 ret = phy_base_write(phydev, MSCC_PHY_MAC_CFG_FASTLINK, val); 1596 if (ret) 1597 return ret; 1598 1599 ret = phy_base_write(phydev, MSCC_EXT_PAGE_ACCESS, 1600 MSCC_PHY_PAGE_STANDARD); 1601 if (ret) 1602 return ret; 1603 1604 val = PROC_CMD_MCB_ACCESS_MAC_CONF | PROC_CMD_RST_CONF_PORT | 1605 PROC_CMD_READ_MOD_WRITE_PORT; 1606 if (phydev->interface == PHY_INTERFACE_MODE_QSGMII) 1607 val |= PROC_CMD_QSGMII_MAC; 1608 else 1609 val |= PROC_CMD_SGMII_MAC; 1610 1611 ret = vsc8584_cmd(phydev, val); 1612 if (ret) 1613 return ret; 1614 1615 usleep_range(10000, 20000); 1616 1617 /* Disable SerDes for 100Base-FX */ 1618 ret = vsc8584_cmd(phydev, PROC_CMD_FIBER_MEDIA_CONF | 1619 PROC_CMD_FIBER_PORT(vsc8531->addr) | 1620 PROC_CMD_FIBER_DISABLE | 1621 PROC_CMD_READ_MOD_WRITE_PORT | 1622 PROC_CMD_RST_CONF_PORT | PROC_CMD_FIBER_100BASE_FX); 1623 if (ret) 1624 return ret; 1625 1626 /* Disable SerDes for 1000Base-X */ 1627 ret = vsc8584_cmd(phydev, PROC_CMD_FIBER_MEDIA_CONF | 1628 PROC_CMD_FIBER_PORT(vsc8531->addr) | 1629 PROC_CMD_FIBER_DISABLE | 1630 PROC_CMD_READ_MOD_WRITE_PORT | 1631 PROC_CMD_RST_CONF_PORT | PROC_CMD_FIBER_1000BASE_X); 1632 if (ret) 1633 return ret; 1634 1635 return vsc85xx_sd6g_config_v2(phydev); 1636 } 1637 1638 static int vsc8574_config_host_serdes(struct phy_device *phydev) 1639 { 1640 struct vsc8531_private *vsc8531 = phydev->priv; 1641 int ret; 1642 u16 val; 1643 1644 ret = phy_base_write(phydev, MSCC_EXT_PAGE_ACCESS, 1645 MSCC_PHY_PAGE_EXTENDED_GPIO); 1646 if (ret) 1647 return ret; 1648 1649 val = phy_base_read(phydev, MSCC_PHY_MAC_CFG_FASTLINK); 1650 val &= ~MAC_CFG_MASK; 1651 if (phydev->interface == PHY_INTERFACE_MODE_QSGMII) { 1652 val |= MAC_CFG_QSGMII; 1653 } else if (phydev->interface == PHY_INTERFACE_MODE_SGMII) { 1654 val |= MAC_CFG_SGMII; 1655 } else if (phy_interface_is_rgmii(phydev)) { 1656 val |= MAC_CFG_RGMII; 1657 } else { 1658 ret = -EINVAL; 1659 return ret; 1660 } 1661 1662 ret = phy_base_write(phydev, MSCC_PHY_MAC_CFG_FASTLINK, val); 1663 if (ret) 1664 return ret; 1665 1666 ret = phy_base_write(phydev, MSCC_EXT_PAGE_ACCESS, 1667 MSCC_PHY_PAGE_STANDARD); 1668 if (ret) 1669 return ret; 1670 1671 if (!phy_interface_is_rgmii(phydev)) { 1672 val = PROC_CMD_MCB_ACCESS_MAC_CONF | PROC_CMD_RST_CONF_PORT | 1673 PROC_CMD_READ_MOD_WRITE_PORT; 1674 if (phydev->interface == PHY_INTERFACE_MODE_QSGMII) 1675 val |= PROC_CMD_QSGMII_MAC; 1676 else 1677 val |= PROC_CMD_SGMII_MAC; 1678 1679 ret = vsc8584_cmd(phydev, val); 1680 if (ret) 1681 return ret; 1682 1683 usleep_range(10000, 20000); 1684 } 1685 1686 /* Disable SerDes for 100Base-FX */ 1687 ret = vsc8584_cmd(phydev, PROC_CMD_FIBER_MEDIA_CONF | 1688 PROC_CMD_FIBER_PORT(vsc8531->addr) | 1689 PROC_CMD_FIBER_DISABLE | 1690 PROC_CMD_READ_MOD_WRITE_PORT | 1691 PROC_CMD_RST_CONF_PORT | PROC_CMD_FIBER_100BASE_FX); 1692 if (ret) 1693 return ret; 1694 1695 /* Disable SerDes for 1000Base-X */ 1696 return vsc8584_cmd(phydev, PROC_CMD_FIBER_MEDIA_CONF | 1697 PROC_CMD_FIBER_PORT(vsc8531->addr) | 1698 PROC_CMD_FIBER_DISABLE | 1699 PROC_CMD_READ_MOD_WRITE_PORT | 1700 PROC_CMD_RST_CONF_PORT | PROC_CMD_FIBER_1000BASE_X); 1701 } 1702 1703 static int vsc8584_config_init(struct phy_device *phydev) 1704 { 1705 struct vsc8531_private *vsc8531 = phydev->priv; 1706 int ret, i; 1707 u16 val; 1708 1709 phydev->mdix_ctrl = ETH_TP_MDI_AUTO; 1710 1711 phy_lock_mdio_bus(phydev); 1712 1713 /* Some parts of the init sequence are identical for every PHY in the 1714 * package. Some parts are modifying the GPIO register bank which is a 1715 * set of registers that are affecting all PHYs, a few resetting the 1716 * microprocessor common to all PHYs. The CRC check responsible of the 1717 * checking the firmware within the 8051 microprocessor can only be 1718 * accessed via the PHY whose internal address in the package is 0. 1719 * All PHYs' interrupts mask register has to be zeroed before enabling 1720 * any PHY's interrupt in this register. 1721 * For all these reasons, we need to do the init sequence once and only 1722 * once whatever is the first PHY in the package that is initialized and 1723 * do the correct init sequence for all PHYs that are package-critical 1724 * in this pre-init function. 1725 */ 1726 if (phy_package_init_once(phydev)) { 1727 /* The following switch statement assumes that the lowest 1728 * nibble of the phy_id_mask is always 0. This works because 1729 * the lowest nibble of the PHY_ID's below are also 0. 1730 */ 1731 WARN_ON(phydev->drv->phy_id_mask & 0xf); 1732 1733 switch (phydev->phy_id & phydev->drv->phy_id_mask) { 1734 case PHY_ID_VSC8504: 1735 case PHY_ID_VSC8552: 1736 case PHY_ID_VSC8572: 1737 case PHY_ID_VSC8574: 1738 ret = vsc8574_config_pre_init(phydev); 1739 if (ret) 1740 goto err; 1741 ret = vsc8574_config_host_serdes(phydev); 1742 if (ret) 1743 goto err; 1744 break; 1745 case PHY_ID_VSC856X: 1746 case PHY_ID_VSC8575: 1747 case PHY_ID_VSC8582: 1748 case PHY_ID_VSC8584: 1749 ret = vsc8584_config_pre_init(phydev); 1750 if (ret) 1751 goto err; 1752 ret = vsc8584_config_host_serdes(phydev); 1753 if (ret) 1754 goto err; 1755 vsc85xx_coma_mode_release(phydev); 1756 break; 1757 default: 1758 ret = -EINVAL; 1759 break; 1760 } 1761 1762 if (ret) 1763 goto err; 1764 } 1765 1766 phy_unlock_mdio_bus(phydev); 1767 1768 ret = vsc8584_macsec_init(phydev); 1769 if (ret) 1770 return ret; 1771 1772 ret = vsc8584_ptp_init(phydev); 1773 if (ret) 1774 return ret; 1775 1776 val = phy_read(phydev, MSCC_PHY_EXT_PHY_CNTL_1); 1777 val &= ~(MEDIA_OP_MODE_MASK | VSC8584_MAC_IF_SELECTION_MASK); 1778 val |= (MEDIA_OP_MODE_COPPER << MEDIA_OP_MODE_POS) | 1779 (VSC8584_MAC_IF_SELECTION_SGMII << VSC8584_MAC_IF_SELECTION_POS); 1780 ret = phy_write(phydev, MSCC_PHY_EXT_PHY_CNTL_1, val); 1781 if (ret) 1782 return ret; 1783 1784 ret = vsc85xx_update_rgmii_cntl(phydev, VSC8572_RGMII_CNTL, 1785 VSC8572_RGMII_RX_DELAY_MASK, 1786 VSC8572_RGMII_TX_DELAY_MASK); 1787 if (ret) 1788 return ret; 1789 1790 ret = genphy_soft_reset(phydev); 1791 if (ret) 1792 return ret; 1793 1794 for (i = 0; i < vsc8531->nleds; i++) { 1795 ret = vsc85xx_led_cntl_set(phydev, i, vsc8531->leds_mode[i]); 1796 if (ret) 1797 return ret; 1798 } 1799 1800 return 0; 1801 1802 err: 1803 phy_unlock_mdio_bus(phydev); 1804 return ret; 1805 } 1806 1807 static irqreturn_t vsc8584_handle_interrupt(struct phy_device *phydev) 1808 { 1809 irqreturn_t ret; 1810 int irq_status; 1811 1812 irq_status = phy_read(phydev, MII_VSC85XX_INT_STATUS); 1813 if (irq_status < 0) 1814 return IRQ_NONE; 1815 1816 /* Timestamping IRQ does not set a bit in the global INT_STATUS, so 1817 * irq_status would be 0. 1818 */ 1819 ret = vsc8584_handle_ts_interrupt(phydev); 1820 if (!(irq_status & MII_VSC85XX_INT_MASK_MASK)) 1821 return ret; 1822 1823 if (irq_status & MII_VSC85XX_INT_MASK_EXT) 1824 vsc8584_handle_macsec_interrupt(phydev); 1825 1826 if (irq_status & MII_VSC85XX_INT_MASK_LINK_CHG) 1827 phy_trigger_machine(phydev); 1828 1829 return IRQ_HANDLED; 1830 } 1831 1832 static int vsc85xx_config_init(struct phy_device *phydev) 1833 { 1834 int rc, i, phy_id; 1835 struct vsc8531_private *vsc8531 = phydev->priv; 1836 1837 rc = vsc85xx_default_config(phydev); 1838 if (rc) 1839 return rc; 1840 1841 rc = vsc85xx_mac_if_set(phydev, phydev->interface); 1842 if (rc) 1843 return rc; 1844 1845 rc = vsc85xx_edge_rate_cntl_set(phydev, vsc8531->rate_magic); 1846 if (rc) 1847 return rc; 1848 1849 phy_id = phydev->drv->phy_id & phydev->drv->phy_id_mask; 1850 if (PHY_ID_VSC8531 == phy_id || PHY_ID_VSC8541 == phy_id || 1851 PHY_ID_VSC8530 == phy_id || PHY_ID_VSC8540 == phy_id) { 1852 rc = vsc8531_pre_init_seq_set(phydev); 1853 if (rc) 1854 return rc; 1855 } 1856 1857 rc = vsc85xx_eee_init_seq_set(phydev); 1858 if (rc) 1859 return rc; 1860 1861 for (i = 0; i < vsc8531->nleds; i++) { 1862 rc = vsc85xx_led_cntl_set(phydev, i, vsc8531->leds_mode[i]); 1863 if (rc) 1864 return rc; 1865 } 1866 1867 return 0; 1868 } 1869 1870 static int __phy_write_mcb_s6g(struct phy_device *phydev, u32 reg, u8 mcb, 1871 u32 op) 1872 { 1873 unsigned long deadline; 1874 u32 val; 1875 int ret; 1876 1877 ret = vsc85xx_csr_write(phydev, PHY_MCB_TARGET, reg, 1878 op | (1 << mcb)); 1879 if (ret) 1880 return -EINVAL; 1881 1882 deadline = jiffies + msecs_to_jiffies(PROC_CMD_NCOMPLETED_TIMEOUT_MS); 1883 do { 1884 usleep_range(500, 1000); 1885 val = vsc85xx_csr_read(phydev, PHY_MCB_TARGET, reg); 1886 1887 if (val == 0xffffffff) 1888 return -EIO; 1889 1890 } while (time_before(jiffies, deadline) && (val & op)); 1891 1892 if (val & op) 1893 return -ETIMEDOUT; 1894 1895 return 0; 1896 } 1897 1898 /* Trigger a read to the specified MCB */ 1899 int phy_update_mcb_s6g(struct phy_device *phydev, u32 reg, u8 mcb) 1900 { 1901 return __phy_write_mcb_s6g(phydev, reg, mcb, PHY_MCB_S6G_READ); 1902 } 1903 1904 /* Trigger a write to the specified MCB */ 1905 int phy_commit_mcb_s6g(struct phy_device *phydev, u32 reg, u8 mcb) 1906 { 1907 return __phy_write_mcb_s6g(phydev, reg, mcb, PHY_MCB_S6G_WRITE); 1908 } 1909 1910 static int vsc8514_config_host_serdes(struct phy_device *phydev) 1911 { 1912 int ret; 1913 u16 val; 1914 1915 ret = phy_base_write(phydev, MSCC_EXT_PAGE_ACCESS, 1916 MSCC_PHY_PAGE_EXTENDED_GPIO); 1917 if (ret) 1918 return ret; 1919 1920 val = phy_base_read(phydev, MSCC_PHY_MAC_CFG_FASTLINK); 1921 val &= ~MAC_CFG_MASK; 1922 val |= MAC_CFG_QSGMII; 1923 ret = phy_base_write(phydev, MSCC_PHY_MAC_CFG_FASTLINK, val); 1924 if (ret) 1925 return ret; 1926 1927 ret = phy_base_write(phydev, MSCC_EXT_PAGE_ACCESS, 1928 MSCC_PHY_PAGE_STANDARD); 1929 if (ret) 1930 return ret; 1931 1932 ret = vsc8584_cmd(phydev, PROC_CMD_NOP); 1933 if (ret) 1934 return ret; 1935 1936 ret = vsc8584_cmd(phydev, 1937 PROC_CMD_MCB_ACCESS_MAC_CONF | 1938 PROC_CMD_RST_CONF_PORT | 1939 PROC_CMD_READ_MOD_WRITE_PORT | PROC_CMD_QSGMII_MAC); 1940 if (ret) { 1941 dev_err(&phydev->mdio.dev, "%s: QSGMII error: %d\n", 1942 __func__, ret); 1943 return ret; 1944 } 1945 1946 /* Apply 6G SerDes FOJI Algorithm 1947 * Initial condition requirement: 1948 * 1. hold 8051 in reset 1949 * 2. disable patch vector 0, in order to allow IB cal poll during FoJi 1950 * 3. deassert 8051 reset after change patch vector status 1951 * 4. proceed with FoJi (vsc85xx_sd6g_config_v2) 1952 */ 1953 vsc8584_micro_assert_reset(phydev); 1954 val = phy_base_read(phydev, MSCC_INT_MEM_CNTL); 1955 /* clear bit 8, to disable patch vector 0 */ 1956 val &= ~PATCH_VEC_ZERO_EN; 1957 ret = phy_base_write(phydev, MSCC_INT_MEM_CNTL, val); 1958 /* Enable 8051 clock, don't set patch present, disable PRAM clock override */ 1959 vsc8584_micro_deassert_reset(phydev, false); 1960 1961 return vsc85xx_sd6g_config_v2(phydev); 1962 } 1963 1964 static int vsc8514_config_pre_init(struct phy_device *phydev) 1965 { 1966 /* These are the settings to override the silicon default 1967 * values to handle hardware performance of PHY. They 1968 * are set at Power-On state and remain until PHY Reset. 1969 */ 1970 static const struct reg_val pre_init1[] = { 1971 {0x0f90, 0x00688980}, 1972 {0x0786, 0x00000003}, 1973 {0x07fa, 0x0050100f}, 1974 {0x0f82, 0x0012b002}, 1975 {0x1686, 0x00000004}, 1976 {0x168c, 0x00d2c46f}, 1977 {0x17a2, 0x00000620}, 1978 {0x16a0, 0x00eeffdd}, 1979 {0x16a6, 0x00071448}, 1980 {0x16a4, 0x0013132f}, 1981 {0x16a8, 0x00000000}, 1982 {0x0ffc, 0x00c0a028}, 1983 {0x0fe8, 0x0091b06c}, 1984 {0x0fea, 0x00041600}, 1985 {0x0f80, 0x00fffaff}, 1986 {0x0fec, 0x00901809}, 1987 {0x0ffe, 0x00b01007}, 1988 {0x16b0, 0x00eeff00}, 1989 {0x16b2, 0x00007000}, 1990 {0x16b4, 0x00000814}, 1991 }; 1992 struct device *dev = &phydev->mdio.dev; 1993 unsigned int i; 1994 u16 reg; 1995 int ret; 1996 1997 ret = vsc8584_pll5g_reset(phydev); 1998 if (ret < 0) { 1999 dev_err(dev, "failed LCPLL reset, ret: %d\n", ret); 2000 return ret; 2001 } 2002 2003 phy_base_write(phydev, MSCC_EXT_PAGE_ACCESS, MSCC_PHY_PAGE_STANDARD); 2004 2005 /* all writes below are broadcasted to all PHYs in the same package */ 2006 reg = phy_base_read(phydev, MSCC_PHY_EXT_CNTL_STATUS); 2007 reg |= SMI_BROADCAST_WR_EN; 2008 phy_base_write(phydev, MSCC_PHY_EXT_CNTL_STATUS, reg); 2009 2010 phy_base_write(phydev, MSCC_EXT_PAGE_ACCESS, MSCC_PHY_PAGE_TEST); 2011 2012 reg = phy_base_read(phydev, MSCC_PHY_TEST_PAGE_8); 2013 reg |= BIT(15); 2014 phy_base_write(phydev, MSCC_PHY_TEST_PAGE_8, reg); 2015 2016 phy_base_write(phydev, MSCC_EXT_PAGE_ACCESS, MSCC_PHY_PAGE_TR); 2017 2018 for (i = 0; i < ARRAY_SIZE(pre_init1); i++) 2019 vsc8584_csr_write(phydev, pre_init1[i].reg, pre_init1[i].val); 2020 2021 phy_base_write(phydev, MSCC_EXT_PAGE_ACCESS, MSCC_PHY_PAGE_TEST); 2022 2023 reg = phy_base_read(phydev, MSCC_PHY_TEST_PAGE_8); 2024 reg &= ~BIT(15); 2025 phy_base_write(phydev, MSCC_PHY_TEST_PAGE_8, reg); 2026 2027 phy_base_write(phydev, MSCC_EXT_PAGE_ACCESS, MSCC_PHY_PAGE_STANDARD); 2028 2029 reg = phy_base_read(phydev, MSCC_PHY_EXT_CNTL_STATUS); 2030 reg &= ~SMI_BROADCAST_WR_EN; 2031 phy_base_write(phydev, MSCC_PHY_EXT_CNTL_STATUS, reg); 2032 2033 /* Add pre-patching commands to: 2034 * 1. enable 8051 clock, operate 8051 clock at 125 MHz 2035 * instead of HW default 62.5MHz 2036 * 2. write patch vector 0, to skip IB cal polling executed 2037 * as part of the 0x80E0 ROM command 2038 */ 2039 vsc8584_micro_deassert_reset(phydev, false); 2040 2041 vsc8584_micro_assert_reset(phydev); 2042 phy_base_write(phydev, MSCC_EXT_PAGE_ACCESS, 2043 MSCC_PHY_PAGE_EXTENDED_GPIO); 2044 /* ROM address to trap, for patch vector 0 */ 2045 reg = MSCC_ROM_TRAP_SERDES_6G_CFG; 2046 ret = phy_base_write(phydev, MSCC_TRAP_ROM_ADDR(1), reg); 2047 if (ret) 2048 goto err; 2049 /* RAM address to jump to, when patch vector 0 enabled */ 2050 reg = MSCC_RAM_TRAP_SERDES_6G_CFG; 2051 ret = phy_base_write(phydev, MSCC_PATCH_RAM_ADDR(1), reg); 2052 if (ret) 2053 goto err; 2054 reg = phy_base_read(phydev, MSCC_INT_MEM_CNTL); 2055 reg |= PATCH_VEC_ZERO_EN; /* bit 8, enable patch vector 0 */ 2056 ret = phy_base_write(phydev, MSCC_INT_MEM_CNTL, reg); 2057 if (ret) 2058 goto err; 2059 2060 /* Enable 8051 clock, don't set patch present 2061 * yet, disable PRAM clock override 2062 */ 2063 vsc8584_micro_deassert_reset(phydev, false); 2064 return ret; 2065 err: 2066 /* restore 8051 and bail w error */ 2067 vsc8584_micro_deassert_reset(phydev, false); 2068 return ret; 2069 } 2070 2071 static int vsc8514_config_init(struct phy_device *phydev) 2072 { 2073 struct vsc8531_private *vsc8531 = phydev->priv; 2074 int ret, i; 2075 2076 phydev->mdix_ctrl = ETH_TP_MDI_AUTO; 2077 2078 phy_lock_mdio_bus(phydev); 2079 2080 /* Some parts of the init sequence are identical for every PHY in the 2081 * package. Some parts are modifying the GPIO register bank which is a 2082 * set of registers that are affecting all PHYs, a few resetting the 2083 * microprocessor common to all PHYs. 2084 * All PHYs' interrupts mask register has to be zeroed before enabling 2085 * any PHY's interrupt in this register. 2086 * For all these reasons, we need to do the init sequence once and only 2087 * once whatever is the first PHY in the package that is initialized and 2088 * do the correct init sequence for all PHYs that are package-critical 2089 * in this pre-init function. 2090 */ 2091 if (phy_package_init_once(phydev)) { 2092 ret = vsc8514_config_pre_init(phydev); 2093 if (ret) 2094 goto err; 2095 ret = vsc8514_config_host_serdes(phydev); 2096 if (ret) 2097 goto err; 2098 vsc85xx_coma_mode_release(phydev); 2099 } 2100 2101 phy_unlock_mdio_bus(phydev); 2102 2103 ret = phy_modify(phydev, MSCC_PHY_EXT_PHY_CNTL_1, MEDIA_OP_MODE_MASK, 2104 MEDIA_OP_MODE_COPPER << MEDIA_OP_MODE_POS); 2105 2106 if (ret) 2107 return ret; 2108 2109 ret = genphy_soft_reset(phydev); 2110 2111 if (ret) 2112 return ret; 2113 2114 for (i = 0; i < vsc8531->nleds; i++) { 2115 ret = vsc85xx_led_cntl_set(phydev, i, vsc8531->leds_mode[i]); 2116 if (ret) 2117 return ret; 2118 } 2119 2120 return ret; 2121 2122 err: 2123 phy_unlock_mdio_bus(phydev); 2124 return ret; 2125 } 2126 2127 static int vsc85xx_ack_interrupt(struct phy_device *phydev) 2128 { 2129 int rc = 0; 2130 2131 if (phydev->interrupts == PHY_INTERRUPT_ENABLED) 2132 rc = phy_read(phydev, MII_VSC85XX_INT_STATUS); 2133 2134 return (rc < 0) ? rc : 0; 2135 } 2136 2137 static int vsc85xx_config_intr(struct phy_device *phydev) 2138 { 2139 int rc; 2140 2141 if (phydev->interrupts == PHY_INTERRUPT_ENABLED) { 2142 rc = vsc85xx_ack_interrupt(phydev); 2143 if (rc) 2144 return rc; 2145 2146 vsc8584_config_macsec_intr(phydev); 2147 vsc8584_config_ts_intr(phydev); 2148 2149 rc = phy_write(phydev, MII_VSC85XX_INT_MASK, 2150 MII_VSC85XX_INT_MASK_MASK); 2151 } else { 2152 rc = phy_write(phydev, MII_VSC85XX_INT_MASK, 0); 2153 if (rc < 0) 2154 return rc; 2155 rc = phy_read(phydev, MII_VSC85XX_INT_STATUS); 2156 if (rc < 0) 2157 return rc; 2158 2159 rc = vsc85xx_ack_interrupt(phydev); 2160 } 2161 2162 return rc; 2163 } 2164 2165 static irqreturn_t vsc85xx_handle_interrupt(struct phy_device *phydev) 2166 { 2167 int irq_status; 2168 2169 irq_status = phy_read(phydev, MII_VSC85XX_INT_STATUS); 2170 if (irq_status < 0) { 2171 phy_error(phydev); 2172 return IRQ_NONE; 2173 } 2174 2175 if (!(irq_status & MII_VSC85XX_INT_MASK_MASK)) 2176 return IRQ_NONE; 2177 2178 phy_trigger_machine(phydev); 2179 2180 return IRQ_HANDLED; 2181 } 2182 2183 static int vsc85xx_config_aneg(struct phy_device *phydev) 2184 { 2185 int rc; 2186 2187 rc = vsc85xx_mdix_set(phydev, phydev->mdix_ctrl); 2188 if (rc < 0) 2189 return rc; 2190 2191 return genphy_config_aneg(phydev); 2192 } 2193 2194 static int vsc85xx_read_status(struct phy_device *phydev) 2195 { 2196 int rc; 2197 2198 rc = vsc85xx_mdix_get(phydev, &phydev->mdix); 2199 if (rc < 0) 2200 return rc; 2201 2202 return genphy_read_status(phydev); 2203 } 2204 2205 static int vsc8514_probe(struct phy_device *phydev) 2206 { 2207 struct vsc8531_private *vsc8531; 2208 u32 default_mode[4] = {VSC8531_LINK_1000_ACTIVITY, 2209 VSC8531_LINK_100_ACTIVITY, VSC8531_LINK_ACTIVITY, 2210 VSC8531_DUPLEX_COLLISION}; 2211 2212 vsc8531 = devm_kzalloc(&phydev->mdio.dev, sizeof(*vsc8531), GFP_KERNEL); 2213 if (!vsc8531) 2214 return -ENOMEM; 2215 2216 phydev->priv = vsc8531; 2217 2218 vsc8584_get_base_addr(phydev); 2219 devm_phy_package_join(&phydev->mdio.dev, phydev, 2220 vsc8531->base_addr, 0); 2221 2222 vsc8531->nleds = 4; 2223 vsc8531->supp_led_modes = VSC85XX_SUPP_LED_MODES; 2224 vsc8531->hw_stats = vsc85xx_hw_stats; 2225 vsc8531->nstats = ARRAY_SIZE(vsc85xx_hw_stats); 2226 vsc8531->stats = devm_kcalloc(&phydev->mdio.dev, vsc8531->nstats, 2227 sizeof(u64), GFP_KERNEL); 2228 if (!vsc8531->stats) 2229 return -ENOMEM; 2230 2231 return vsc85xx_dt_led_modes_get(phydev, default_mode); 2232 } 2233 2234 static int vsc8574_probe(struct phy_device *phydev) 2235 { 2236 struct vsc8531_private *vsc8531; 2237 u32 default_mode[4] = {VSC8531_LINK_1000_ACTIVITY, 2238 VSC8531_LINK_100_ACTIVITY, VSC8531_LINK_ACTIVITY, 2239 VSC8531_DUPLEX_COLLISION}; 2240 2241 vsc8531 = devm_kzalloc(&phydev->mdio.dev, sizeof(*vsc8531), GFP_KERNEL); 2242 if (!vsc8531) 2243 return -ENOMEM; 2244 2245 phydev->priv = vsc8531; 2246 2247 vsc8584_get_base_addr(phydev); 2248 devm_phy_package_join(&phydev->mdio.dev, phydev, 2249 vsc8531->base_addr, 0); 2250 2251 vsc8531->nleds = 4; 2252 vsc8531->supp_led_modes = VSC8584_SUPP_LED_MODES; 2253 vsc8531->hw_stats = vsc8584_hw_stats; 2254 vsc8531->nstats = ARRAY_SIZE(vsc8584_hw_stats); 2255 vsc8531->stats = devm_kcalloc(&phydev->mdio.dev, vsc8531->nstats, 2256 sizeof(u64), GFP_KERNEL); 2257 if (!vsc8531->stats) 2258 return -ENOMEM; 2259 2260 return vsc85xx_dt_led_modes_get(phydev, default_mode); 2261 } 2262 2263 static int vsc8584_probe(struct phy_device *phydev) 2264 { 2265 struct vsc8531_private *vsc8531; 2266 u32 default_mode[4] = {VSC8531_LINK_1000_ACTIVITY, 2267 VSC8531_LINK_100_ACTIVITY, VSC8531_LINK_ACTIVITY, 2268 VSC8531_DUPLEX_COLLISION}; 2269 int ret; 2270 2271 if ((phydev->phy_id & MSCC_DEV_REV_MASK) != VSC8584_REVB) { 2272 dev_err(&phydev->mdio.dev, "Only VSC8584 revB is supported.\n"); 2273 return -ENOTSUPP; 2274 } 2275 2276 vsc8531 = devm_kzalloc(&phydev->mdio.dev, sizeof(*vsc8531), GFP_KERNEL); 2277 if (!vsc8531) 2278 return -ENOMEM; 2279 2280 phydev->priv = vsc8531; 2281 2282 vsc8584_get_base_addr(phydev); 2283 devm_phy_package_join(&phydev->mdio.dev, phydev, vsc8531->base_addr, 2284 sizeof(struct vsc85xx_shared_private)); 2285 2286 vsc8531->nleds = 4; 2287 vsc8531->supp_led_modes = VSC8584_SUPP_LED_MODES; 2288 vsc8531->hw_stats = vsc8584_hw_stats; 2289 vsc8531->nstats = ARRAY_SIZE(vsc8584_hw_stats); 2290 vsc8531->stats = devm_kcalloc(&phydev->mdio.dev, vsc8531->nstats, 2291 sizeof(u64), GFP_KERNEL); 2292 if (!vsc8531->stats) 2293 return -ENOMEM; 2294 2295 if (phy_package_probe_once(phydev)) { 2296 ret = vsc8584_ptp_probe_once(phydev); 2297 if (ret) 2298 return ret; 2299 } 2300 2301 ret = vsc8584_ptp_probe(phydev); 2302 if (ret) 2303 return ret; 2304 2305 return vsc85xx_dt_led_modes_get(phydev, default_mode); 2306 } 2307 2308 static int vsc85xx_probe(struct phy_device *phydev) 2309 { 2310 struct vsc8531_private *vsc8531; 2311 int rate_magic; 2312 u32 default_mode[2] = {VSC8531_LINK_1000_ACTIVITY, 2313 VSC8531_LINK_100_ACTIVITY}; 2314 2315 rate_magic = vsc85xx_edge_rate_magic_get(phydev); 2316 if (rate_magic < 0) 2317 return rate_magic; 2318 2319 vsc8531 = devm_kzalloc(&phydev->mdio.dev, sizeof(*vsc8531), GFP_KERNEL); 2320 if (!vsc8531) 2321 return -ENOMEM; 2322 2323 phydev->priv = vsc8531; 2324 2325 vsc8531->rate_magic = rate_magic; 2326 vsc8531->nleds = 2; 2327 vsc8531->supp_led_modes = VSC85XX_SUPP_LED_MODES; 2328 vsc8531->hw_stats = vsc85xx_hw_stats; 2329 vsc8531->nstats = ARRAY_SIZE(vsc85xx_hw_stats); 2330 vsc8531->stats = devm_kcalloc(&phydev->mdio.dev, vsc8531->nstats, 2331 sizeof(u64), GFP_KERNEL); 2332 if (!vsc8531->stats) 2333 return -ENOMEM; 2334 2335 return vsc85xx_dt_led_modes_get(phydev, default_mode); 2336 } 2337 2338 /* Microsemi VSC85xx PHYs */ 2339 static struct phy_driver vsc85xx_driver[] = { 2340 { 2341 .phy_id = PHY_ID_VSC8501, 2342 .name = "Microsemi GE VSC8501 SyncE", 2343 .phy_id_mask = 0xfffffff0, 2344 /* PHY_BASIC_FEATURES */ 2345 .soft_reset = &genphy_soft_reset, 2346 .config_init = &vsc85xx_config_init, 2347 .config_aneg = &vsc85xx_config_aneg, 2348 .read_status = &vsc85xx_read_status, 2349 .handle_interrupt = vsc85xx_handle_interrupt, 2350 .config_intr = &vsc85xx_config_intr, 2351 .suspend = &genphy_suspend, 2352 .resume = &genphy_resume, 2353 .probe = &vsc85xx_probe, 2354 .set_wol = &vsc85xx_wol_set, 2355 .get_wol = &vsc85xx_wol_get, 2356 .get_tunable = &vsc85xx_get_tunable, 2357 .set_tunable = &vsc85xx_set_tunable, 2358 .read_page = &vsc85xx_phy_read_page, 2359 .write_page = &vsc85xx_phy_write_page, 2360 .get_sset_count = &vsc85xx_get_sset_count, 2361 .get_strings = &vsc85xx_get_strings, 2362 .get_stats = &vsc85xx_get_stats, 2363 }, 2364 { 2365 .phy_id = PHY_ID_VSC8502, 2366 .name = "Microsemi GE VSC8502 SyncE", 2367 .phy_id_mask = 0xfffffff0, 2368 /* PHY_BASIC_FEATURES */ 2369 .soft_reset = &genphy_soft_reset, 2370 .config_init = &vsc85xx_config_init, 2371 .config_aneg = &vsc85xx_config_aneg, 2372 .read_status = &vsc85xx_read_status, 2373 .handle_interrupt = vsc85xx_handle_interrupt, 2374 .config_intr = &vsc85xx_config_intr, 2375 .suspend = &genphy_suspend, 2376 .resume = &genphy_resume, 2377 .probe = &vsc85xx_probe, 2378 .set_wol = &vsc85xx_wol_set, 2379 .get_wol = &vsc85xx_wol_get, 2380 .get_tunable = &vsc85xx_get_tunable, 2381 .set_tunable = &vsc85xx_set_tunable, 2382 .read_page = &vsc85xx_phy_read_page, 2383 .write_page = &vsc85xx_phy_write_page, 2384 .get_sset_count = &vsc85xx_get_sset_count, 2385 .get_strings = &vsc85xx_get_strings, 2386 .get_stats = &vsc85xx_get_stats, 2387 }, 2388 { 2389 .phy_id = PHY_ID_VSC8504, 2390 .name = "Microsemi GE VSC8504 SyncE", 2391 .phy_id_mask = 0xfffffff0, 2392 /* PHY_GBIT_FEATURES */ 2393 .soft_reset = &genphy_soft_reset, 2394 .config_init = &vsc8584_config_init, 2395 .config_aneg = &vsc85xx_config_aneg, 2396 .aneg_done = &genphy_aneg_done, 2397 .read_status = &vsc85xx_read_status, 2398 .handle_interrupt = vsc85xx_handle_interrupt, 2399 .config_intr = &vsc85xx_config_intr, 2400 .suspend = &genphy_suspend, 2401 .resume = &genphy_resume, 2402 .probe = &vsc8574_probe, 2403 .set_wol = &vsc85xx_wol_set, 2404 .get_wol = &vsc85xx_wol_get, 2405 .get_tunable = &vsc85xx_get_tunable, 2406 .set_tunable = &vsc85xx_set_tunable, 2407 .read_page = &vsc85xx_phy_read_page, 2408 .write_page = &vsc85xx_phy_write_page, 2409 .get_sset_count = &vsc85xx_get_sset_count, 2410 .get_strings = &vsc85xx_get_strings, 2411 .get_stats = &vsc85xx_get_stats, 2412 }, 2413 { 2414 .phy_id = PHY_ID_VSC8514, 2415 .name = "Microsemi GE VSC8514 SyncE", 2416 .phy_id_mask = 0xfffffff0, 2417 .soft_reset = &genphy_soft_reset, 2418 .config_init = &vsc8514_config_init, 2419 .config_aneg = &vsc85xx_config_aneg, 2420 .read_status = &vsc85xx_read_status, 2421 .handle_interrupt = vsc85xx_handle_interrupt, 2422 .config_intr = &vsc85xx_config_intr, 2423 .suspend = &genphy_suspend, 2424 .resume = &genphy_resume, 2425 .probe = &vsc8514_probe, 2426 .set_wol = &vsc85xx_wol_set, 2427 .get_wol = &vsc85xx_wol_get, 2428 .get_tunable = &vsc85xx_get_tunable, 2429 .set_tunable = &vsc85xx_set_tunable, 2430 .read_page = &vsc85xx_phy_read_page, 2431 .write_page = &vsc85xx_phy_write_page, 2432 .get_sset_count = &vsc85xx_get_sset_count, 2433 .get_strings = &vsc85xx_get_strings, 2434 .get_stats = &vsc85xx_get_stats, 2435 }, 2436 { 2437 .phy_id = PHY_ID_VSC8530, 2438 .name = "Microsemi FE VSC8530", 2439 .phy_id_mask = 0xfffffff0, 2440 /* PHY_BASIC_FEATURES */ 2441 .soft_reset = &genphy_soft_reset, 2442 .config_init = &vsc85xx_config_init, 2443 .config_aneg = &vsc85xx_config_aneg, 2444 .read_status = &vsc85xx_read_status, 2445 .handle_interrupt = vsc85xx_handle_interrupt, 2446 .config_intr = &vsc85xx_config_intr, 2447 .suspend = &genphy_suspend, 2448 .resume = &genphy_resume, 2449 .probe = &vsc85xx_probe, 2450 .set_wol = &vsc85xx_wol_set, 2451 .get_wol = &vsc85xx_wol_get, 2452 .get_tunable = &vsc85xx_get_tunable, 2453 .set_tunable = &vsc85xx_set_tunable, 2454 .read_page = &vsc85xx_phy_read_page, 2455 .write_page = &vsc85xx_phy_write_page, 2456 .get_sset_count = &vsc85xx_get_sset_count, 2457 .get_strings = &vsc85xx_get_strings, 2458 .get_stats = &vsc85xx_get_stats, 2459 }, 2460 { 2461 .phy_id = PHY_ID_VSC8531, 2462 .name = "Microsemi VSC8531", 2463 .phy_id_mask = 0xfffffff0, 2464 /* PHY_GBIT_FEATURES */ 2465 .soft_reset = &genphy_soft_reset, 2466 .config_init = &vsc85xx_config_init, 2467 .config_aneg = &vsc85xx_config_aneg, 2468 .read_status = &vsc85xx_read_status, 2469 .handle_interrupt = vsc85xx_handle_interrupt, 2470 .config_intr = &vsc85xx_config_intr, 2471 .suspend = &genphy_suspend, 2472 .resume = &genphy_resume, 2473 .probe = &vsc85xx_probe, 2474 .set_wol = &vsc85xx_wol_set, 2475 .get_wol = &vsc85xx_wol_get, 2476 .get_tunable = &vsc85xx_get_tunable, 2477 .set_tunable = &vsc85xx_set_tunable, 2478 .read_page = &vsc85xx_phy_read_page, 2479 .write_page = &vsc85xx_phy_write_page, 2480 .get_sset_count = &vsc85xx_get_sset_count, 2481 .get_strings = &vsc85xx_get_strings, 2482 .get_stats = &vsc85xx_get_stats, 2483 }, 2484 { 2485 .phy_id = PHY_ID_VSC8540, 2486 .name = "Microsemi FE VSC8540 SyncE", 2487 .phy_id_mask = 0xfffffff0, 2488 /* PHY_BASIC_FEATURES */ 2489 .soft_reset = &genphy_soft_reset, 2490 .config_init = &vsc85xx_config_init, 2491 .config_aneg = &vsc85xx_config_aneg, 2492 .read_status = &vsc85xx_read_status, 2493 .handle_interrupt = vsc85xx_handle_interrupt, 2494 .config_intr = &vsc85xx_config_intr, 2495 .suspend = &genphy_suspend, 2496 .resume = &genphy_resume, 2497 .probe = &vsc85xx_probe, 2498 .set_wol = &vsc85xx_wol_set, 2499 .get_wol = &vsc85xx_wol_get, 2500 .get_tunable = &vsc85xx_get_tunable, 2501 .set_tunable = &vsc85xx_set_tunable, 2502 .read_page = &vsc85xx_phy_read_page, 2503 .write_page = &vsc85xx_phy_write_page, 2504 .get_sset_count = &vsc85xx_get_sset_count, 2505 .get_strings = &vsc85xx_get_strings, 2506 .get_stats = &vsc85xx_get_stats, 2507 }, 2508 { 2509 .phy_id = PHY_ID_VSC8541, 2510 .name = "Microsemi VSC8541 SyncE", 2511 .phy_id_mask = 0xfffffff0, 2512 /* PHY_GBIT_FEATURES */ 2513 .soft_reset = &genphy_soft_reset, 2514 .config_init = &vsc85xx_config_init, 2515 .config_aneg = &vsc85xx_config_aneg, 2516 .read_status = &vsc85xx_read_status, 2517 .handle_interrupt = vsc85xx_handle_interrupt, 2518 .config_intr = &vsc85xx_config_intr, 2519 .suspend = &genphy_suspend, 2520 .resume = &genphy_resume, 2521 .probe = &vsc85xx_probe, 2522 .set_wol = &vsc85xx_wol_set, 2523 .get_wol = &vsc85xx_wol_get, 2524 .get_tunable = &vsc85xx_get_tunable, 2525 .set_tunable = &vsc85xx_set_tunable, 2526 .read_page = &vsc85xx_phy_read_page, 2527 .write_page = &vsc85xx_phy_write_page, 2528 .get_sset_count = &vsc85xx_get_sset_count, 2529 .get_strings = &vsc85xx_get_strings, 2530 .get_stats = &vsc85xx_get_stats, 2531 }, 2532 { 2533 .phy_id = PHY_ID_VSC8552, 2534 .name = "Microsemi GE VSC8552 SyncE", 2535 .phy_id_mask = 0xfffffff0, 2536 /* PHY_GBIT_FEATURES */ 2537 .soft_reset = &genphy_soft_reset, 2538 .config_init = &vsc8584_config_init, 2539 .config_aneg = &vsc85xx_config_aneg, 2540 .read_status = &vsc85xx_read_status, 2541 .handle_interrupt = vsc85xx_handle_interrupt, 2542 .config_intr = &vsc85xx_config_intr, 2543 .suspend = &genphy_suspend, 2544 .resume = &genphy_resume, 2545 .probe = &vsc8574_probe, 2546 .set_wol = &vsc85xx_wol_set, 2547 .get_wol = &vsc85xx_wol_get, 2548 .get_tunable = &vsc85xx_get_tunable, 2549 .set_tunable = &vsc85xx_set_tunable, 2550 .read_page = &vsc85xx_phy_read_page, 2551 .write_page = &vsc85xx_phy_write_page, 2552 .get_sset_count = &vsc85xx_get_sset_count, 2553 .get_strings = &vsc85xx_get_strings, 2554 .get_stats = &vsc85xx_get_stats, 2555 }, 2556 { 2557 .phy_id = PHY_ID_VSC856X, 2558 .name = "Microsemi GE VSC856X SyncE", 2559 .phy_id_mask = 0xfffffff0, 2560 /* PHY_GBIT_FEATURES */ 2561 .soft_reset = &genphy_soft_reset, 2562 .config_init = &vsc8584_config_init, 2563 .config_aneg = &vsc85xx_config_aneg, 2564 .read_status = &vsc85xx_read_status, 2565 .handle_interrupt = vsc85xx_handle_interrupt, 2566 .config_intr = &vsc85xx_config_intr, 2567 .suspend = &genphy_suspend, 2568 .resume = &genphy_resume, 2569 .probe = &vsc8584_probe, 2570 .get_tunable = &vsc85xx_get_tunable, 2571 .set_tunable = &vsc85xx_set_tunable, 2572 .read_page = &vsc85xx_phy_read_page, 2573 .write_page = &vsc85xx_phy_write_page, 2574 .get_sset_count = &vsc85xx_get_sset_count, 2575 .get_strings = &vsc85xx_get_strings, 2576 .get_stats = &vsc85xx_get_stats, 2577 }, 2578 { 2579 .phy_id = PHY_ID_VSC8572, 2580 .name = "Microsemi GE VSC8572 SyncE", 2581 .phy_id_mask = 0xfffffff0, 2582 /* PHY_GBIT_FEATURES */ 2583 .soft_reset = &genphy_soft_reset, 2584 .config_init = &vsc8584_config_init, 2585 .config_aneg = &vsc85xx_config_aneg, 2586 .aneg_done = &genphy_aneg_done, 2587 .read_status = &vsc85xx_read_status, 2588 .handle_interrupt = &vsc8584_handle_interrupt, 2589 .config_intr = &vsc85xx_config_intr, 2590 .suspend = &genphy_suspend, 2591 .resume = &genphy_resume, 2592 .probe = &vsc8574_probe, 2593 .set_wol = &vsc85xx_wol_set, 2594 .get_wol = &vsc85xx_wol_get, 2595 .get_tunable = &vsc85xx_get_tunable, 2596 .set_tunable = &vsc85xx_set_tunable, 2597 .read_page = &vsc85xx_phy_read_page, 2598 .write_page = &vsc85xx_phy_write_page, 2599 .get_sset_count = &vsc85xx_get_sset_count, 2600 .get_strings = &vsc85xx_get_strings, 2601 .get_stats = &vsc85xx_get_stats, 2602 }, 2603 { 2604 .phy_id = PHY_ID_VSC8574, 2605 .name = "Microsemi GE VSC8574 SyncE", 2606 .phy_id_mask = 0xfffffff0, 2607 /* PHY_GBIT_FEATURES */ 2608 .soft_reset = &genphy_soft_reset, 2609 .config_init = &vsc8584_config_init, 2610 .config_aneg = &vsc85xx_config_aneg, 2611 .aneg_done = &genphy_aneg_done, 2612 .read_status = &vsc85xx_read_status, 2613 .handle_interrupt = vsc85xx_handle_interrupt, 2614 .config_intr = &vsc85xx_config_intr, 2615 .suspend = &genphy_suspend, 2616 .resume = &genphy_resume, 2617 .probe = &vsc8574_probe, 2618 .set_wol = &vsc85xx_wol_set, 2619 .get_wol = &vsc85xx_wol_get, 2620 .get_tunable = &vsc85xx_get_tunable, 2621 .set_tunable = &vsc85xx_set_tunable, 2622 .read_page = &vsc85xx_phy_read_page, 2623 .write_page = &vsc85xx_phy_write_page, 2624 .get_sset_count = &vsc85xx_get_sset_count, 2625 .get_strings = &vsc85xx_get_strings, 2626 .get_stats = &vsc85xx_get_stats, 2627 }, 2628 { 2629 .phy_id = PHY_ID_VSC8575, 2630 .name = "Microsemi GE VSC8575 SyncE", 2631 .phy_id_mask = 0xfffffff0, 2632 /* PHY_GBIT_FEATURES */ 2633 .soft_reset = &genphy_soft_reset, 2634 .config_init = &vsc8584_config_init, 2635 .config_aneg = &vsc85xx_config_aneg, 2636 .aneg_done = &genphy_aneg_done, 2637 .read_status = &vsc85xx_read_status, 2638 .handle_interrupt = &vsc8584_handle_interrupt, 2639 .config_intr = &vsc85xx_config_intr, 2640 .suspend = &genphy_suspend, 2641 .resume = &genphy_resume, 2642 .probe = &vsc8584_probe, 2643 .get_tunable = &vsc85xx_get_tunable, 2644 .set_tunable = &vsc85xx_set_tunable, 2645 .read_page = &vsc85xx_phy_read_page, 2646 .write_page = &vsc85xx_phy_write_page, 2647 .get_sset_count = &vsc85xx_get_sset_count, 2648 .get_strings = &vsc85xx_get_strings, 2649 .get_stats = &vsc85xx_get_stats, 2650 }, 2651 { 2652 .phy_id = PHY_ID_VSC8582, 2653 .name = "Microsemi GE VSC8582 SyncE", 2654 .phy_id_mask = 0xfffffff0, 2655 /* PHY_GBIT_FEATURES */ 2656 .soft_reset = &genphy_soft_reset, 2657 .config_init = &vsc8584_config_init, 2658 .config_aneg = &vsc85xx_config_aneg, 2659 .aneg_done = &genphy_aneg_done, 2660 .read_status = &vsc85xx_read_status, 2661 .handle_interrupt = &vsc8584_handle_interrupt, 2662 .config_intr = &vsc85xx_config_intr, 2663 .suspend = &genphy_suspend, 2664 .resume = &genphy_resume, 2665 .probe = &vsc8584_probe, 2666 .get_tunable = &vsc85xx_get_tunable, 2667 .set_tunable = &vsc85xx_set_tunable, 2668 .read_page = &vsc85xx_phy_read_page, 2669 .write_page = &vsc85xx_phy_write_page, 2670 .get_sset_count = &vsc85xx_get_sset_count, 2671 .get_strings = &vsc85xx_get_strings, 2672 .get_stats = &vsc85xx_get_stats, 2673 }, 2674 { 2675 .phy_id = PHY_ID_VSC8584, 2676 .name = "Microsemi GE VSC8584 SyncE", 2677 .phy_id_mask = 0xfffffff0, 2678 /* PHY_GBIT_FEATURES */ 2679 .soft_reset = &genphy_soft_reset, 2680 .config_init = &vsc8584_config_init, 2681 .config_aneg = &vsc85xx_config_aneg, 2682 .aneg_done = &genphy_aneg_done, 2683 .read_status = &vsc85xx_read_status, 2684 .handle_interrupt = &vsc8584_handle_interrupt, 2685 .config_intr = &vsc85xx_config_intr, 2686 .suspend = &genphy_suspend, 2687 .resume = &genphy_resume, 2688 .probe = &vsc8584_probe, 2689 .get_tunable = &vsc85xx_get_tunable, 2690 .set_tunable = &vsc85xx_set_tunable, 2691 .read_page = &vsc85xx_phy_read_page, 2692 .write_page = &vsc85xx_phy_write_page, 2693 .get_sset_count = &vsc85xx_get_sset_count, 2694 .get_strings = &vsc85xx_get_strings, 2695 .get_stats = &vsc85xx_get_stats, 2696 .link_change_notify = &vsc85xx_link_change_notify, 2697 } 2698 2699 }; 2700 2701 module_phy_driver(vsc85xx_driver); 2702 2703 static struct mdio_device_id __maybe_unused vsc85xx_tbl[] = { 2704 { PHY_ID_MATCH_VENDOR(PHY_VENDOR_MSCC) }, 2705 { } 2706 }; 2707 2708 MODULE_DEVICE_TABLE(mdio, vsc85xx_tbl); 2709 2710 MODULE_DESCRIPTION("Microsemi VSC85xx PHY driver"); 2711 MODULE_AUTHOR("Nagaraju Lakkaraju"); 2712 MODULE_LICENSE("Dual MIT/GPL"); 2713 2714 MODULE_FIRMWARE(MSCC_VSC8584_REVB_INT8051_FW); 2715 MODULE_FIRMWARE(MSCC_VSC8574_REVB_INT8051_FW); 2716