1 // SPDX-License-Identifier: GPL-2.0+ 2 /* 3 * Marvell 10G 88x3310 PHY driver 4 * 5 * Based upon the ID registers, this PHY appears to be a mixture of IPs 6 * from two different companies. 7 * 8 * There appears to be several different data paths through the PHY which 9 * are automatically managed by the PHY. The following has been determined 10 * via observation and experimentation for a setup using single-lane Serdes: 11 * 12 * SGMII PHYXS -- BASE-T PCS -- 10G PMA -- AN -- Copper (for <= 1G) 13 * 10GBASE-KR PHYXS -- BASE-T PCS -- 10G PMA -- AN -- Copper (for 10G) 14 * 10GBASE-KR PHYXS -- BASE-R PCS -- Fiber 15 * 16 * With XAUI, observation shows: 17 * 18 * XAUI PHYXS -- <appropriate PCS as above> 19 * 20 * and no switching of the host interface mode occurs. 21 * 22 * If both the fiber and copper ports are connected, the first to gain 23 * link takes priority and the other port is completely locked out. 24 */ 25 #include <linux/bitfield.h> 26 #include <linux/ctype.h> 27 #include <linux/delay.h> 28 #include <linux/hwmon.h> 29 #include <linux/marvell_phy.h> 30 #include <linux/phy.h> 31 #include <linux/sfp.h> 32 #include <linux/netdevice.h> 33 34 #define MV_PHY_ALASKA_NBT_QUIRK_MASK 0xfffffffe 35 #define MV_PHY_ALASKA_NBT_QUIRK_REV (MARVELL_PHY_ID_88X3310 | 0xa) 36 37 #define MV_VERSION(a,b,c,d) ((a) << 24 | (b) << 16 | (c) << 8 | (d)) 38 39 enum { 40 MV_PMA_FW_VER0 = 0xc011, 41 MV_PMA_FW_VER1 = 0xc012, 42 MV_PMA_21X0_PORT_CTRL = 0xc04a, 43 MV_PMA_21X0_PORT_CTRL_SWRST = BIT(15), 44 MV_PMA_21X0_PORT_CTRL_MACTYPE_MASK = 0x7, 45 MV_PMA_21X0_PORT_CTRL_MACTYPE_USXGMII = 0x0, 46 MV_PMA_2180_PORT_CTRL_MACTYPE_DXGMII = 0x1, 47 MV_PMA_2180_PORT_CTRL_MACTYPE_QXGMII = 0x2, 48 MV_PMA_21X0_PORT_CTRL_MACTYPE_5GBASER = 0x4, 49 MV_PMA_21X0_PORT_CTRL_MACTYPE_5GBASER_NO_SGMII_AN = 0x5, 50 MV_PMA_21X0_PORT_CTRL_MACTYPE_10GBASER_RATE_MATCH = 0x6, 51 MV_PMA_BOOT = 0xc050, 52 MV_PMA_BOOT_FATAL = BIT(0), 53 54 MV_PCS_BASE_T = 0x0000, 55 MV_PCS_BASE_R = 0x1000, 56 MV_PCS_1000BASEX = 0x2000, 57 58 MV_PCS_CSCR1 = 0x8000, 59 MV_PCS_CSCR1_ED_MASK = 0x0300, 60 MV_PCS_CSCR1_ED_OFF = 0x0000, 61 MV_PCS_CSCR1_ED_RX = 0x0200, 62 MV_PCS_CSCR1_ED_NLP = 0x0300, 63 MV_PCS_CSCR1_MDIX_MASK = 0x0060, 64 MV_PCS_CSCR1_MDIX_MDI = 0x0000, 65 MV_PCS_CSCR1_MDIX_MDIX = 0x0020, 66 MV_PCS_CSCR1_MDIX_AUTO = 0x0060, 67 68 MV_PCS_DSC1 = 0x8003, 69 MV_PCS_DSC1_ENABLE = BIT(9), 70 MV_PCS_DSC1_10GBT = 0x01c0, 71 MV_PCS_DSC1_1GBR = 0x0038, 72 MV_PCS_DSC1_100BTX = 0x0007, 73 MV_PCS_DSC2 = 0x8004, 74 MV_PCS_DSC2_2P5G = 0xf000, 75 MV_PCS_DSC2_5G = 0x0f00, 76 77 MV_PCS_CSSR1 = 0x8008, 78 MV_PCS_CSSR1_SPD1_MASK = 0xc000, 79 MV_PCS_CSSR1_SPD1_SPD2 = 0xc000, 80 MV_PCS_CSSR1_SPD1_1000 = 0x8000, 81 MV_PCS_CSSR1_SPD1_100 = 0x4000, 82 MV_PCS_CSSR1_SPD1_10 = 0x0000, 83 MV_PCS_CSSR1_DUPLEX_FULL= BIT(13), 84 MV_PCS_CSSR1_RESOLVED = BIT(11), 85 MV_PCS_CSSR1_MDIX = BIT(6), 86 MV_PCS_CSSR1_SPD2_MASK = 0x000c, 87 MV_PCS_CSSR1_SPD2_5000 = 0x0008, 88 MV_PCS_CSSR1_SPD2_2500 = 0x0004, 89 MV_PCS_CSSR1_SPD2_10000 = 0x0000, 90 91 /* Temperature read register (88E2110 only) */ 92 MV_PCS_TEMP = 0x8042, 93 94 /* Number of ports on the device */ 95 MV_PCS_PORT_INFO = 0xd00d, 96 MV_PCS_PORT_INFO_NPORTS_MASK = 0x0380, 97 MV_PCS_PORT_INFO_NPORTS_SHIFT = 7, 98 99 /* SerDes reinitialization 88E21X0 */ 100 MV_AN_21X0_SERDES_CTRL2 = 0x800f, 101 MV_AN_21X0_SERDES_CTRL2_AUTO_INIT_DIS = BIT(13), 102 MV_AN_21X0_SERDES_CTRL2_RUN_INIT = BIT(15), 103 104 /* These registers appear at 0x800X and 0xa00X - the 0xa00X control 105 * registers appear to set themselves to the 0x800X when AN is 106 * restarted, but status registers appear readable from either. 107 */ 108 MV_AN_CTRL1000 = 0x8000, /* 1000base-T control register */ 109 MV_AN_STAT1000 = 0x8001, /* 1000base-T status register */ 110 111 /* Vendor2 MMD registers */ 112 MV_V2_PORT_CTRL = 0xf001, 113 MV_V2_PORT_CTRL_PWRDOWN = BIT(11), 114 MV_V2_33X0_PORT_CTRL_SWRST = BIT(15), 115 MV_V2_33X0_PORT_CTRL_MACTYPE_MASK = 0x7, 116 MV_V2_33X0_PORT_CTRL_MACTYPE_RXAUI = 0x0, 117 MV_V2_3310_PORT_CTRL_MACTYPE_XAUI_RATE_MATCH = 0x1, 118 MV_V2_3340_PORT_CTRL_MACTYPE_RXAUI_NO_SGMII_AN = 0x1, 119 MV_V2_33X0_PORT_CTRL_MACTYPE_RXAUI_RATE_MATCH = 0x2, 120 MV_V2_3310_PORT_CTRL_MACTYPE_XAUI = 0x3, 121 MV_V2_33X0_PORT_CTRL_MACTYPE_10GBASER = 0x4, 122 MV_V2_33X0_PORT_CTRL_MACTYPE_10GBASER_NO_SGMII_AN = 0x5, 123 MV_V2_33X0_PORT_CTRL_MACTYPE_10GBASER_RATE_MATCH = 0x6, 124 MV_V2_33X0_PORT_CTRL_MACTYPE_USXGMII = 0x7, 125 MV_V2_PORT_INTR_STS = 0xf040, 126 MV_V2_PORT_INTR_MASK = 0xf043, 127 MV_V2_PORT_INTR_STS_WOL_EN = BIT(8), 128 MV_V2_MAGIC_PKT_WORD0 = 0xf06b, 129 MV_V2_MAGIC_PKT_WORD1 = 0xf06c, 130 MV_V2_MAGIC_PKT_WORD2 = 0xf06d, 131 /* Wake on LAN registers */ 132 MV_V2_WOL_CTRL = 0xf06e, 133 MV_V2_WOL_CTRL_CLEAR_STS = BIT(15), 134 MV_V2_WOL_CTRL_MAGIC_PKT_EN = BIT(0), 135 /* Temperature control/read registers (88X3310 only) */ 136 MV_V2_TEMP_CTRL = 0xf08a, 137 MV_V2_TEMP_CTRL_MASK = 0xc000, 138 MV_V2_TEMP_CTRL_SAMPLE = 0x0000, 139 MV_V2_TEMP_CTRL_DISABLE = 0xc000, 140 MV_V2_TEMP = 0xf08c, 141 MV_V2_TEMP_UNKNOWN = 0x9600, /* unknown function */ 142 }; 143 144 struct mv3310_chip { 145 bool (*has_downshift)(struct phy_device *phydev); 146 void (*init_supported_interfaces)(unsigned long *mask); 147 int (*get_mactype)(struct phy_device *phydev); 148 int (*set_mactype)(struct phy_device *phydev, int mactype); 149 int (*select_mactype)(unsigned long *interfaces); 150 int (*init_interface)(struct phy_device *phydev, int mactype); 151 152 #ifdef CONFIG_HWMON 153 int (*hwmon_read_temp_reg)(struct phy_device *phydev); 154 #endif 155 }; 156 157 struct mv3310_priv { 158 DECLARE_BITMAP(supported_interfaces, PHY_INTERFACE_MODE_MAX); 159 160 u32 firmware_ver; 161 bool has_downshift; 162 bool rate_match; 163 phy_interface_t const_interface; 164 165 struct device *hwmon_dev; 166 char *hwmon_name; 167 }; 168 169 static const struct mv3310_chip *to_mv3310_chip(struct phy_device *phydev) 170 { 171 return phydev->drv->driver_data; 172 } 173 174 #ifdef CONFIG_HWMON 175 static umode_t mv3310_hwmon_is_visible(const void *data, 176 enum hwmon_sensor_types type, 177 u32 attr, int channel) 178 { 179 if (type == hwmon_chip && attr == hwmon_chip_update_interval) 180 return 0444; 181 if (type == hwmon_temp && attr == hwmon_temp_input) 182 return 0444; 183 return 0; 184 } 185 186 static int mv3310_hwmon_read_temp_reg(struct phy_device *phydev) 187 { 188 return phy_read_mmd(phydev, MDIO_MMD_VEND2, MV_V2_TEMP); 189 } 190 191 static int mv2110_hwmon_read_temp_reg(struct phy_device *phydev) 192 { 193 return phy_read_mmd(phydev, MDIO_MMD_PCS, MV_PCS_TEMP); 194 } 195 196 static int mv3310_hwmon_read(struct device *dev, enum hwmon_sensor_types type, 197 u32 attr, int channel, long *value) 198 { 199 struct phy_device *phydev = dev_get_drvdata(dev); 200 const struct mv3310_chip *chip = to_mv3310_chip(phydev); 201 int temp; 202 203 if (type == hwmon_chip && attr == hwmon_chip_update_interval) { 204 *value = MSEC_PER_SEC; 205 return 0; 206 } 207 208 if (type == hwmon_temp && attr == hwmon_temp_input) { 209 temp = chip->hwmon_read_temp_reg(phydev); 210 if (temp < 0) 211 return temp; 212 213 *value = ((temp & 0xff) - 75) * 1000; 214 215 return 0; 216 } 217 218 return -EOPNOTSUPP; 219 } 220 221 static const struct hwmon_ops mv3310_hwmon_ops = { 222 .is_visible = mv3310_hwmon_is_visible, 223 .read = mv3310_hwmon_read, 224 }; 225 226 static u32 mv3310_hwmon_chip_config[] = { 227 HWMON_C_REGISTER_TZ | HWMON_C_UPDATE_INTERVAL, 228 0, 229 }; 230 231 static const struct hwmon_channel_info mv3310_hwmon_chip = { 232 .type = hwmon_chip, 233 .config = mv3310_hwmon_chip_config, 234 }; 235 236 static u32 mv3310_hwmon_temp_config[] = { 237 HWMON_T_INPUT, 238 0, 239 }; 240 241 static const struct hwmon_channel_info mv3310_hwmon_temp = { 242 .type = hwmon_temp, 243 .config = mv3310_hwmon_temp_config, 244 }; 245 246 static const struct hwmon_channel_info *mv3310_hwmon_info[] = { 247 &mv3310_hwmon_chip, 248 &mv3310_hwmon_temp, 249 NULL, 250 }; 251 252 static const struct hwmon_chip_info mv3310_hwmon_chip_info = { 253 .ops = &mv3310_hwmon_ops, 254 .info = mv3310_hwmon_info, 255 }; 256 257 static int mv3310_hwmon_config(struct phy_device *phydev, bool enable) 258 { 259 u16 val; 260 int ret; 261 262 if (phydev->drv->phy_id != MARVELL_PHY_ID_88X3310) 263 return 0; 264 265 ret = phy_write_mmd(phydev, MDIO_MMD_VEND2, MV_V2_TEMP, 266 MV_V2_TEMP_UNKNOWN); 267 if (ret < 0) 268 return ret; 269 270 val = enable ? MV_V2_TEMP_CTRL_SAMPLE : MV_V2_TEMP_CTRL_DISABLE; 271 272 return phy_modify_mmd(phydev, MDIO_MMD_VEND2, MV_V2_TEMP_CTRL, 273 MV_V2_TEMP_CTRL_MASK, val); 274 } 275 276 static int mv3310_hwmon_probe(struct phy_device *phydev) 277 { 278 struct device *dev = &phydev->mdio.dev; 279 struct mv3310_priv *priv = dev_get_drvdata(&phydev->mdio.dev); 280 int i, j, ret; 281 282 priv->hwmon_name = devm_kstrdup(dev, dev_name(dev), GFP_KERNEL); 283 if (!priv->hwmon_name) 284 return -ENODEV; 285 286 for (i = j = 0; priv->hwmon_name[i]; i++) { 287 if (isalnum(priv->hwmon_name[i])) { 288 if (i != j) 289 priv->hwmon_name[j] = priv->hwmon_name[i]; 290 j++; 291 } 292 } 293 priv->hwmon_name[j] = '\0'; 294 295 ret = mv3310_hwmon_config(phydev, true); 296 if (ret) 297 return ret; 298 299 priv->hwmon_dev = devm_hwmon_device_register_with_info(dev, 300 priv->hwmon_name, phydev, 301 &mv3310_hwmon_chip_info, NULL); 302 303 return PTR_ERR_OR_ZERO(priv->hwmon_dev); 304 } 305 #else 306 static inline int mv3310_hwmon_config(struct phy_device *phydev, bool enable) 307 { 308 return 0; 309 } 310 311 static int mv3310_hwmon_probe(struct phy_device *phydev) 312 { 313 return 0; 314 } 315 #endif 316 317 static int mv3310_power_down(struct phy_device *phydev) 318 { 319 return phy_set_bits_mmd(phydev, MDIO_MMD_VEND2, MV_V2_PORT_CTRL, 320 MV_V2_PORT_CTRL_PWRDOWN); 321 } 322 323 static int mv3310_power_up(struct phy_device *phydev) 324 { 325 struct mv3310_priv *priv = dev_get_drvdata(&phydev->mdio.dev); 326 int ret; 327 328 ret = phy_clear_bits_mmd(phydev, MDIO_MMD_VEND2, MV_V2_PORT_CTRL, 329 MV_V2_PORT_CTRL_PWRDOWN); 330 331 if (phydev->drv->phy_id != MARVELL_PHY_ID_88X3310 || 332 priv->firmware_ver < 0x00030000) 333 return ret; 334 335 return phy_set_bits_mmd(phydev, MDIO_MMD_VEND2, MV_V2_PORT_CTRL, 336 MV_V2_33X0_PORT_CTRL_SWRST); 337 } 338 339 static int mv3310_reset(struct phy_device *phydev, u32 unit) 340 { 341 int val, err; 342 343 err = phy_modify_mmd(phydev, MDIO_MMD_PCS, unit + MDIO_CTRL1, 344 MDIO_CTRL1_RESET, MDIO_CTRL1_RESET); 345 if (err < 0) 346 return err; 347 348 return phy_read_mmd_poll_timeout(phydev, MDIO_MMD_PCS, 349 unit + MDIO_CTRL1, val, 350 !(val & MDIO_CTRL1_RESET), 351 5000, 100000, true); 352 } 353 354 static int mv3310_get_downshift(struct phy_device *phydev, u8 *ds) 355 { 356 struct mv3310_priv *priv = dev_get_drvdata(&phydev->mdio.dev); 357 int val; 358 359 if (!priv->has_downshift) 360 return -EOPNOTSUPP; 361 362 val = phy_read_mmd(phydev, MDIO_MMD_PCS, MV_PCS_DSC1); 363 if (val < 0) 364 return val; 365 366 if (val & MV_PCS_DSC1_ENABLE) 367 /* assume that all fields are the same */ 368 *ds = 1 + FIELD_GET(MV_PCS_DSC1_10GBT, (u16)val); 369 else 370 *ds = DOWNSHIFT_DEV_DISABLE; 371 372 return 0; 373 } 374 375 static int mv3310_set_downshift(struct phy_device *phydev, u8 ds) 376 { 377 struct mv3310_priv *priv = dev_get_drvdata(&phydev->mdio.dev); 378 u16 val; 379 int err; 380 381 if (!priv->has_downshift) 382 return -EOPNOTSUPP; 383 384 if (ds == DOWNSHIFT_DEV_DISABLE) 385 return phy_clear_bits_mmd(phydev, MDIO_MMD_PCS, MV_PCS_DSC1, 386 MV_PCS_DSC1_ENABLE); 387 388 /* DOWNSHIFT_DEV_DEFAULT_COUNT is confusing. It looks like it should 389 * set the default settings for the PHY. However, it is used for 390 * "ethtool --set-phy-tunable ethN downshift on". The intention is 391 * to enable downshift at a default number of retries. The default 392 * settings for 88x3310 are for two retries with downshift disabled. 393 * So let's use two retries with downshift enabled. 394 */ 395 if (ds == DOWNSHIFT_DEV_DEFAULT_COUNT) 396 ds = 2; 397 398 if (ds > 8) 399 return -E2BIG; 400 401 ds -= 1; 402 val = FIELD_PREP(MV_PCS_DSC2_2P5G, ds); 403 val |= FIELD_PREP(MV_PCS_DSC2_5G, ds); 404 err = phy_modify_mmd(phydev, MDIO_MMD_PCS, MV_PCS_DSC2, 405 MV_PCS_DSC2_2P5G | MV_PCS_DSC2_5G, val); 406 if (err < 0) 407 return err; 408 409 val = MV_PCS_DSC1_ENABLE; 410 val |= FIELD_PREP(MV_PCS_DSC1_10GBT, ds); 411 val |= FIELD_PREP(MV_PCS_DSC1_1GBR, ds); 412 val |= FIELD_PREP(MV_PCS_DSC1_100BTX, ds); 413 414 return phy_modify_mmd(phydev, MDIO_MMD_PCS, MV_PCS_DSC1, 415 MV_PCS_DSC1_ENABLE | MV_PCS_DSC1_10GBT | 416 MV_PCS_DSC1_1GBR | MV_PCS_DSC1_100BTX, val); 417 } 418 419 static int mv3310_get_edpd(struct phy_device *phydev, u16 *edpd) 420 { 421 int val; 422 423 val = phy_read_mmd(phydev, MDIO_MMD_PCS, MV_PCS_CSCR1); 424 if (val < 0) 425 return val; 426 427 switch (val & MV_PCS_CSCR1_ED_MASK) { 428 case MV_PCS_CSCR1_ED_NLP: 429 *edpd = 1000; 430 break; 431 case MV_PCS_CSCR1_ED_RX: 432 *edpd = ETHTOOL_PHY_EDPD_NO_TX; 433 break; 434 default: 435 *edpd = ETHTOOL_PHY_EDPD_DISABLE; 436 break; 437 } 438 return 0; 439 } 440 441 static int mv3310_set_edpd(struct phy_device *phydev, u16 edpd) 442 { 443 u16 val; 444 int err; 445 446 switch (edpd) { 447 case 1000: 448 case ETHTOOL_PHY_EDPD_DFLT_TX_MSECS: 449 val = MV_PCS_CSCR1_ED_NLP; 450 break; 451 452 case ETHTOOL_PHY_EDPD_NO_TX: 453 val = MV_PCS_CSCR1_ED_RX; 454 break; 455 456 case ETHTOOL_PHY_EDPD_DISABLE: 457 val = MV_PCS_CSCR1_ED_OFF; 458 break; 459 460 default: 461 return -EINVAL; 462 } 463 464 err = phy_modify_mmd_changed(phydev, MDIO_MMD_PCS, MV_PCS_CSCR1, 465 MV_PCS_CSCR1_ED_MASK, val); 466 if (err > 0) 467 err = mv3310_reset(phydev, MV_PCS_BASE_T); 468 469 return err; 470 } 471 472 static int mv3310_sfp_insert(void *upstream, const struct sfp_eeprom_id *id) 473 { 474 struct phy_device *phydev = upstream; 475 __ETHTOOL_DECLARE_LINK_MODE_MASK(support) = { 0, }; 476 DECLARE_PHY_INTERFACE_MASK(interfaces); 477 phy_interface_t iface; 478 479 sfp_parse_support(phydev->sfp_bus, id, support, interfaces); 480 iface = sfp_select_interface(phydev->sfp_bus, support); 481 482 if (iface != PHY_INTERFACE_MODE_10GBASER) { 483 dev_err(&phydev->mdio.dev, "incompatible SFP module inserted\n"); 484 return -EINVAL; 485 } 486 return 0; 487 } 488 489 static const struct sfp_upstream_ops mv3310_sfp_ops = { 490 .attach = phy_sfp_attach, 491 .detach = phy_sfp_detach, 492 .module_insert = mv3310_sfp_insert, 493 }; 494 495 static int mv3310_probe(struct phy_device *phydev) 496 { 497 const struct mv3310_chip *chip = to_mv3310_chip(phydev); 498 struct mv3310_priv *priv; 499 u32 mmd_mask = MDIO_DEVS_PMAPMD | MDIO_DEVS_AN; 500 int ret; 501 502 if (!phydev->is_c45 || 503 (phydev->c45_ids.devices_in_package & mmd_mask) != mmd_mask) 504 return -ENODEV; 505 506 ret = phy_read_mmd(phydev, MDIO_MMD_PMAPMD, MV_PMA_BOOT); 507 if (ret < 0) 508 return ret; 509 510 if (ret & MV_PMA_BOOT_FATAL) { 511 dev_warn(&phydev->mdio.dev, 512 "PHY failed to boot firmware, status=%04x\n", ret); 513 return -ENODEV; 514 } 515 516 priv = devm_kzalloc(&phydev->mdio.dev, sizeof(*priv), GFP_KERNEL); 517 if (!priv) 518 return -ENOMEM; 519 520 dev_set_drvdata(&phydev->mdio.dev, priv); 521 522 ret = phy_read_mmd(phydev, MDIO_MMD_PMAPMD, MV_PMA_FW_VER0); 523 if (ret < 0) 524 return ret; 525 526 priv->firmware_ver = ret << 16; 527 528 ret = phy_read_mmd(phydev, MDIO_MMD_PMAPMD, MV_PMA_FW_VER1); 529 if (ret < 0) 530 return ret; 531 532 priv->firmware_ver |= ret; 533 534 phydev_info(phydev, "Firmware version %u.%u.%u.%u\n", 535 priv->firmware_ver >> 24, (priv->firmware_ver >> 16) & 255, 536 (priv->firmware_ver >> 8) & 255, priv->firmware_ver & 255); 537 538 if (chip->has_downshift) 539 priv->has_downshift = chip->has_downshift(phydev); 540 541 /* Powering down the port when not in use saves about 600mW */ 542 ret = mv3310_power_down(phydev); 543 if (ret) 544 return ret; 545 546 ret = mv3310_hwmon_probe(phydev); 547 if (ret) 548 return ret; 549 550 chip->init_supported_interfaces(priv->supported_interfaces); 551 552 return phy_sfp_probe(phydev, &mv3310_sfp_ops); 553 } 554 555 static void mv3310_remove(struct phy_device *phydev) 556 { 557 mv3310_hwmon_config(phydev, false); 558 } 559 560 static int mv3310_suspend(struct phy_device *phydev) 561 { 562 return mv3310_power_down(phydev); 563 } 564 565 static int mv3310_resume(struct phy_device *phydev) 566 { 567 int ret; 568 569 ret = mv3310_power_up(phydev); 570 if (ret) 571 return ret; 572 573 return mv3310_hwmon_config(phydev, true); 574 } 575 576 /* Some PHYs in the Alaska family such as the 88X3310 and the 88E2010 577 * don't set bit 14 in PMA Extended Abilities (1.11), although they do 578 * support 2.5GBASET and 5GBASET. For these models, we can still read their 579 * 2.5G/5G extended abilities register (1.21). We detect these models based on 580 * the PMA device identifier, with a mask matching models known to have this 581 * issue 582 */ 583 static bool mv3310_has_pma_ngbaset_quirk(struct phy_device *phydev) 584 { 585 if (!(phydev->c45_ids.devices_in_package & MDIO_DEVS_PMAPMD)) 586 return false; 587 588 /* Only some revisions of the 88X3310 family PMA seem to be impacted */ 589 return (phydev->c45_ids.device_ids[MDIO_MMD_PMAPMD] & 590 MV_PHY_ALASKA_NBT_QUIRK_MASK) == MV_PHY_ALASKA_NBT_QUIRK_REV; 591 } 592 593 static int mv2110_get_mactype(struct phy_device *phydev) 594 { 595 int mactype; 596 597 mactype = phy_read_mmd(phydev, MDIO_MMD_PMAPMD, MV_PMA_21X0_PORT_CTRL); 598 if (mactype < 0) 599 return mactype; 600 601 return mactype & MV_PMA_21X0_PORT_CTRL_MACTYPE_MASK; 602 } 603 604 static int mv2110_set_mactype(struct phy_device *phydev, int mactype) 605 { 606 int err, val; 607 608 mactype &= MV_PMA_21X0_PORT_CTRL_MACTYPE_MASK; 609 err = phy_modify_mmd(phydev, MDIO_MMD_PMAPMD, MV_PMA_21X0_PORT_CTRL, 610 MV_PMA_21X0_PORT_CTRL_SWRST | 611 MV_PMA_21X0_PORT_CTRL_MACTYPE_MASK, 612 MV_PMA_21X0_PORT_CTRL_SWRST | mactype); 613 if (err) 614 return err; 615 616 err = phy_set_bits_mmd(phydev, MDIO_MMD_AN, MV_AN_21X0_SERDES_CTRL2, 617 MV_AN_21X0_SERDES_CTRL2_AUTO_INIT_DIS | 618 MV_AN_21X0_SERDES_CTRL2_RUN_INIT); 619 if (err) 620 return err; 621 622 err = phy_read_mmd_poll_timeout(phydev, MDIO_MMD_AN, 623 MV_AN_21X0_SERDES_CTRL2, val, 624 !(val & 625 MV_AN_21X0_SERDES_CTRL2_RUN_INIT), 626 5000, 100000, true); 627 if (err) 628 return err; 629 630 return phy_clear_bits_mmd(phydev, MDIO_MMD_AN, MV_AN_21X0_SERDES_CTRL2, 631 MV_AN_21X0_SERDES_CTRL2_AUTO_INIT_DIS); 632 } 633 634 static int mv2110_select_mactype(unsigned long *interfaces) 635 { 636 if (test_bit(PHY_INTERFACE_MODE_USXGMII, interfaces)) 637 return MV_PMA_21X0_PORT_CTRL_MACTYPE_USXGMII; 638 else if (test_bit(PHY_INTERFACE_MODE_SGMII, interfaces) && 639 !test_bit(PHY_INTERFACE_MODE_10GBASER, interfaces)) 640 return MV_PMA_21X0_PORT_CTRL_MACTYPE_5GBASER; 641 else if (test_bit(PHY_INTERFACE_MODE_10GBASER, interfaces)) 642 return MV_PMA_21X0_PORT_CTRL_MACTYPE_10GBASER_RATE_MATCH; 643 else 644 return -1; 645 } 646 647 static int mv3310_get_mactype(struct phy_device *phydev) 648 { 649 int mactype; 650 651 mactype = phy_read_mmd(phydev, MDIO_MMD_VEND2, MV_V2_PORT_CTRL); 652 if (mactype < 0) 653 return mactype; 654 655 return mactype & MV_V2_33X0_PORT_CTRL_MACTYPE_MASK; 656 } 657 658 static int mv3310_set_mactype(struct phy_device *phydev, int mactype) 659 { 660 int ret; 661 662 mactype &= MV_V2_33X0_PORT_CTRL_MACTYPE_MASK; 663 ret = phy_modify_mmd_changed(phydev, MDIO_MMD_VEND2, MV_V2_PORT_CTRL, 664 MV_V2_33X0_PORT_CTRL_MACTYPE_MASK, 665 mactype); 666 if (ret <= 0) 667 return ret; 668 669 return phy_set_bits_mmd(phydev, MDIO_MMD_VEND2, MV_V2_PORT_CTRL, 670 MV_V2_33X0_PORT_CTRL_SWRST); 671 } 672 673 static int mv3310_select_mactype(unsigned long *interfaces) 674 { 675 if (test_bit(PHY_INTERFACE_MODE_USXGMII, interfaces)) 676 return MV_V2_33X0_PORT_CTRL_MACTYPE_USXGMII; 677 else if (test_bit(PHY_INTERFACE_MODE_SGMII, interfaces) && 678 test_bit(PHY_INTERFACE_MODE_10GBASER, interfaces)) 679 return MV_V2_33X0_PORT_CTRL_MACTYPE_10GBASER; 680 else if (test_bit(PHY_INTERFACE_MODE_SGMII, interfaces) && 681 test_bit(PHY_INTERFACE_MODE_RXAUI, interfaces)) 682 return MV_V2_33X0_PORT_CTRL_MACTYPE_RXAUI; 683 else if (test_bit(PHY_INTERFACE_MODE_SGMII, interfaces) && 684 test_bit(PHY_INTERFACE_MODE_XAUI, interfaces)) 685 return MV_V2_3310_PORT_CTRL_MACTYPE_XAUI; 686 else if (test_bit(PHY_INTERFACE_MODE_10GBASER, interfaces)) 687 return MV_V2_33X0_PORT_CTRL_MACTYPE_10GBASER_RATE_MATCH; 688 else if (test_bit(PHY_INTERFACE_MODE_RXAUI, interfaces)) 689 return MV_V2_33X0_PORT_CTRL_MACTYPE_RXAUI_RATE_MATCH; 690 else if (test_bit(PHY_INTERFACE_MODE_XAUI, interfaces)) 691 return MV_V2_3310_PORT_CTRL_MACTYPE_XAUI_RATE_MATCH; 692 else if (test_bit(PHY_INTERFACE_MODE_SGMII, interfaces)) 693 return MV_V2_33X0_PORT_CTRL_MACTYPE_10GBASER; 694 else 695 return -1; 696 } 697 698 static int mv2110_init_interface(struct phy_device *phydev, int mactype) 699 { 700 struct mv3310_priv *priv = dev_get_drvdata(&phydev->mdio.dev); 701 702 priv->rate_match = false; 703 704 if (mactype == MV_PMA_21X0_PORT_CTRL_MACTYPE_10GBASER_RATE_MATCH) 705 priv->rate_match = true; 706 707 if (mactype == MV_PMA_21X0_PORT_CTRL_MACTYPE_USXGMII) 708 priv->const_interface = PHY_INTERFACE_MODE_USXGMII; 709 else if (mactype == MV_PMA_21X0_PORT_CTRL_MACTYPE_10GBASER_RATE_MATCH) 710 priv->const_interface = PHY_INTERFACE_MODE_10GBASER; 711 else if (mactype == MV_PMA_21X0_PORT_CTRL_MACTYPE_5GBASER || 712 mactype == MV_PMA_21X0_PORT_CTRL_MACTYPE_5GBASER_NO_SGMII_AN) 713 priv->const_interface = PHY_INTERFACE_MODE_NA; 714 else 715 return -EINVAL; 716 717 return 0; 718 } 719 720 static int mv3310_init_interface(struct phy_device *phydev, int mactype) 721 { 722 struct mv3310_priv *priv = dev_get_drvdata(&phydev->mdio.dev); 723 724 priv->rate_match = false; 725 726 if (mactype == MV_V2_33X0_PORT_CTRL_MACTYPE_10GBASER_RATE_MATCH || 727 mactype == MV_V2_33X0_PORT_CTRL_MACTYPE_RXAUI_RATE_MATCH || 728 mactype == MV_V2_3310_PORT_CTRL_MACTYPE_XAUI_RATE_MATCH) 729 priv->rate_match = true; 730 731 if (mactype == MV_V2_33X0_PORT_CTRL_MACTYPE_USXGMII) 732 priv->const_interface = PHY_INTERFACE_MODE_USXGMII; 733 else if (mactype == MV_V2_33X0_PORT_CTRL_MACTYPE_10GBASER_RATE_MATCH || 734 mactype == MV_V2_33X0_PORT_CTRL_MACTYPE_10GBASER_NO_SGMII_AN || 735 mactype == MV_V2_33X0_PORT_CTRL_MACTYPE_10GBASER) 736 priv->const_interface = PHY_INTERFACE_MODE_10GBASER; 737 else if (mactype == MV_V2_33X0_PORT_CTRL_MACTYPE_RXAUI_RATE_MATCH || 738 mactype == MV_V2_33X0_PORT_CTRL_MACTYPE_RXAUI) 739 priv->const_interface = PHY_INTERFACE_MODE_RXAUI; 740 else if (mactype == MV_V2_3310_PORT_CTRL_MACTYPE_XAUI_RATE_MATCH || 741 mactype == MV_V2_3310_PORT_CTRL_MACTYPE_XAUI) 742 priv->const_interface = PHY_INTERFACE_MODE_XAUI; 743 else 744 return -EINVAL; 745 746 return 0; 747 } 748 749 static int mv3340_init_interface(struct phy_device *phydev, int mactype) 750 { 751 struct mv3310_priv *priv = dev_get_drvdata(&phydev->mdio.dev); 752 int err = 0; 753 754 priv->rate_match = false; 755 756 if (mactype == MV_V2_3340_PORT_CTRL_MACTYPE_RXAUI_NO_SGMII_AN) 757 priv->const_interface = PHY_INTERFACE_MODE_RXAUI; 758 else 759 err = mv3310_init_interface(phydev, mactype); 760 761 return err; 762 } 763 764 static int mv3310_config_init(struct phy_device *phydev) 765 { 766 struct mv3310_priv *priv = dev_get_drvdata(&phydev->mdio.dev); 767 const struct mv3310_chip *chip = to_mv3310_chip(phydev); 768 int err, mactype; 769 770 /* Check that the PHY interface type is compatible */ 771 if (!test_bit(phydev->interface, priv->supported_interfaces)) 772 return -ENODEV; 773 774 phydev->mdix_ctrl = ETH_TP_MDI_AUTO; 775 776 /* Power up so reset works */ 777 err = mv3310_power_up(phydev); 778 if (err) 779 return err; 780 781 /* If host provided host supported interface modes, try to select the 782 * best one 783 */ 784 if (!phy_interface_empty(phydev->host_interfaces)) { 785 mactype = chip->select_mactype(phydev->host_interfaces); 786 if (mactype >= 0) { 787 phydev_info(phydev, "Changing MACTYPE to %i\n", 788 mactype); 789 err = chip->set_mactype(phydev, mactype); 790 if (err) 791 return err; 792 } 793 } 794 795 mactype = chip->get_mactype(phydev); 796 if (mactype < 0) 797 return mactype; 798 799 err = chip->init_interface(phydev, mactype); 800 if (err) { 801 phydev_err(phydev, "MACTYPE configuration invalid\n"); 802 return err; 803 } 804 805 /* Enable EDPD mode - saving 600mW */ 806 err = mv3310_set_edpd(phydev, ETHTOOL_PHY_EDPD_DFLT_TX_MSECS); 807 if (err) 808 return err; 809 810 /* Allow downshift */ 811 err = mv3310_set_downshift(phydev, DOWNSHIFT_DEV_DEFAULT_COUNT); 812 if (err && err != -EOPNOTSUPP) 813 return err; 814 815 return 0; 816 } 817 818 static int mv3310_get_features(struct phy_device *phydev) 819 { 820 int ret, val; 821 822 ret = genphy_c45_pma_read_abilities(phydev); 823 if (ret) 824 return ret; 825 826 if (mv3310_has_pma_ngbaset_quirk(phydev)) { 827 val = phy_read_mmd(phydev, MDIO_MMD_PMAPMD, 828 MDIO_PMA_NG_EXTABLE); 829 if (val < 0) 830 return val; 831 832 linkmode_mod_bit(ETHTOOL_LINK_MODE_2500baseT_Full_BIT, 833 phydev->supported, 834 val & MDIO_PMA_NG_EXTABLE_2_5GBT); 835 836 linkmode_mod_bit(ETHTOOL_LINK_MODE_5000baseT_Full_BIT, 837 phydev->supported, 838 val & MDIO_PMA_NG_EXTABLE_5GBT); 839 } 840 841 return 0; 842 } 843 844 static int mv3310_config_mdix(struct phy_device *phydev) 845 { 846 u16 val; 847 int err; 848 849 switch (phydev->mdix_ctrl) { 850 case ETH_TP_MDI_AUTO: 851 val = MV_PCS_CSCR1_MDIX_AUTO; 852 break; 853 case ETH_TP_MDI_X: 854 val = MV_PCS_CSCR1_MDIX_MDIX; 855 break; 856 case ETH_TP_MDI: 857 val = MV_PCS_CSCR1_MDIX_MDI; 858 break; 859 default: 860 return -EINVAL; 861 } 862 863 err = phy_modify_mmd_changed(phydev, MDIO_MMD_PCS, MV_PCS_CSCR1, 864 MV_PCS_CSCR1_MDIX_MASK, val); 865 if (err > 0) 866 err = mv3310_reset(phydev, MV_PCS_BASE_T); 867 868 return err; 869 } 870 871 static int mv3310_config_aneg(struct phy_device *phydev) 872 { 873 bool changed = false; 874 u16 reg; 875 int ret; 876 877 ret = mv3310_config_mdix(phydev); 878 if (ret < 0) 879 return ret; 880 881 if (phydev->autoneg == AUTONEG_DISABLE) 882 return genphy_c45_pma_setup_forced(phydev); 883 884 ret = genphy_c45_an_config_aneg(phydev); 885 if (ret < 0) 886 return ret; 887 if (ret > 0) 888 changed = true; 889 890 /* Clause 45 has no standardized support for 1000BaseT, therefore 891 * use vendor registers for this mode. 892 */ 893 reg = linkmode_adv_to_mii_ctrl1000_t(phydev->advertising); 894 ret = phy_modify_mmd_changed(phydev, MDIO_MMD_AN, MV_AN_CTRL1000, 895 ADVERTISE_1000FULL | ADVERTISE_1000HALF, reg); 896 if (ret < 0) 897 return ret; 898 if (ret > 0) 899 changed = true; 900 901 return genphy_c45_check_and_restart_aneg(phydev, changed); 902 } 903 904 static int mv3310_aneg_done(struct phy_device *phydev) 905 { 906 int val; 907 908 val = phy_read_mmd(phydev, MDIO_MMD_PCS, MV_PCS_BASE_R + MDIO_STAT1); 909 if (val < 0) 910 return val; 911 912 if (val & MDIO_STAT1_LSTATUS) 913 return 1; 914 915 return genphy_c45_aneg_done(phydev); 916 } 917 918 static void mv3310_update_interface(struct phy_device *phydev) 919 { 920 struct mv3310_priv *priv = dev_get_drvdata(&phydev->mdio.dev); 921 922 if (!phydev->link) 923 return; 924 925 /* In all of the "* with Rate Matching" modes the PHY interface is fixed 926 * at 10Gb. The PHY adapts the rate to actual wire speed with help of 927 * internal 16KB buffer. 928 * 929 * In USXGMII mode the PHY interface mode is also fixed. 930 */ 931 if (priv->rate_match || 932 priv->const_interface == PHY_INTERFACE_MODE_USXGMII) { 933 phydev->interface = priv->const_interface; 934 return; 935 } 936 937 /* The PHY automatically switches its serdes interface (and active PHYXS 938 * instance) between Cisco SGMII, 2500BaseX, 5GBase-R and 10GBase-R / 939 * xaui / rxaui modes according to the speed. 940 * Florian suggests setting phydev->interface to communicate this to the 941 * MAC. Only do this if we are already in one of the above modes. 942 */ 943 switch (phydev->speed) { 944 case SPEED_10000: 945 phydev->interface = priv->const_interface; 946 break; 947 case SPEED_5000: 948 phydev->interface = PHY_INTERFACE_MODE_5GBASER; 949 break; 950 case SPEED_2500: 951 phydev->interface = PHY_INTERFACE_MODE_2500BASEX; 952 break; 953 case SPEED_1000: 954 case SPEED_100: 955 case SPEED_10: 956 phydev->interface = PHY_INTERFACE_MODE_SGMII; 957 break; 958 default: 959 break; 960 } 961 } 962 963 /* 10GBASE-ER,LR,LRM,SR do not support autonegotiation. */ 964 static int mv3310_read_status_10gbaser(struct phy_device *phydev) 965 { 966 phydev->link = 1; 967 phydev->speed = SPEED_10000; 968 phydev->duplex = DUPLEX_FULL; 969 phydev->port = PORT_FIBRE; 970 971 return 0; 972 } 973 974 static int mv3310_read_status_copper(struct phy_device *phydev) 975 { 976 int cssr1, speed, val; 977 978 val = genphy_c45_read_link(phydev); 979 if (val < 0) 980 return val; 981 982 val = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_STAT1); 983 if (val < 0) 984 return val; 985 986 cssr1 = phy_read_mmd(phydev, MDIO_MMD_PCS, MV_PCS_CSSR1); 987 if (cssr1 < 0) 988 return cssr1; 989 990 /* If the link settings are not resolved, mark the link down */ 991 if (!(cssr1 & MV_PCS_CSSR1_RESOLVED)) { 992 phydev->link = 0; 993 return 0; 994 } 995 996 /* Read the copper link settings */ 997 speed = cssr1 & MV_PCS_CSSR1_SPD1_MASK; 998 if (speed == MV_PCS_CSSR1_SPD1_SPD2) 999 speed |= cssr1 & MV_PCS_CSSR1_SPD2_MASK; 1000 1001 switch (speed) { 1002 case MV_PCS_CSSR1_SPD1_SPD2 | MV_PCS_CSSR1_SPD2_10000: 1003 phydev->speed = SPEED_10000; 1004 break; 1005 1006 case MV_PCS_CSSR1_SPD1_SPD2 | MV_PCS_CSSR1_SPD2_5000: 1007 phydev->speed = SPEED_5000; 1008 break; 1009 1010 case MV_PCS_CSSR1_SPD1_SPD2 | MV_PCS_CSSR1_SPD2_2500: 1011 phydev->speed = SPEED_2500; 1012 break; 1013 1014 case MV_PCS_CSSR1_SPD1_1000: 1015 phydev->speed = SPEED_1000; 1016 break; 1017 1018 case MV_PCS_CSSR1_SPD1_100: 1019 phydev->speed = SPEED_100; 1020 break; 1021 1022 case MV_PCS_CSSR1_SPD1_10: 1023 phydev->speed = SPEED_10; 1024 break; 1025 } 1026 1027 phydev->duplex = cssr1 & MV_PCS_CSSR1_DUPLEX_FULL ? 1028 DUPLEX_FULL : DUPLEX_HALF; 1029 phydev->port = PORT_TP; 1030 phydev->mdix = cssr1 & MV_PCS_CSSR1_MDIX ? 1031 ETH_TP_MDI_X : ETH_TP_MDI; 1032 1033 if (val & MDIO_AN_STAT1_COMPLETE) { 1034 val = genphy_c45_read_lpa(phydev); 1035 if (val < 0) 1036 return val; 1037 1038 /* Read the link partner's 1G advertisement */ 1039 val = phy_read_mmd(phydev, MDIO_MMD_AN, MV_AN_STAT1000); 1040 if (val < 0) 1041 return val; 1042 1043 mii_stat1000_mod_linkmode_lpa_t(phydev->lp_advertising, val); 1044 1045 /* Update the pause status */ 1046 phy_resolve_aneg_pause(phydev); 1047 } 1048 1049 return 0; 1050 } 1051 1052 static int mv3310_read_status(struct phy_device *phydev) 1053 { 1054 int err, val; 1055 1056 phydev->speed = SPEED_UNKNOWN; 1057 phydev->duplex = DUPLEX_UNKNOWN; 1058 linkmode_zero(phydev->lp_advertising); 1059 phydev->link = 0; 1060 phydev->pause = 0; 1061 phydev->asym_pause = 0; 1062 phydev->mdix = ETH_TP_MDI_INVALID; 1063 1064 val = phy_read_mmd(phydev, MDIO_MMD_PCS, MV_PCS_BASE_R + MDIO_STAT1); 1065 if (val < 0) 1066 return val; 1067 1068 if (val & MDIO_STAT1_LSTATUS) 1069 err = mv3310_read_status_10gbaser(phydev); 1070 else 1071 err = mv3310_read_status_copper(phydev); 1072 if (err < 0) 1073 return err; 1074 1075 if (phydev->link) 1076 mv3310_update_interface(phydev); 1077 1078 return 0; 1079 } 1080 1081 static int mv3310_get_tunable(struct phy_device *phydev, 1082 struct ethtool_tunable *tuna, void *data) 1083 { 1084 switch (tuna->id) { 1085 case ETHTOOL_PHY_DOWNSHIFT: 1086 return mv3310_get_downshift(phydev, data); 1087 case ETHTOOL_PHY_EDPD: 1088 return mv3310_get_edpd(phydev, data); 1089 default: 1090 return -EOPNOTSUPP; 1091 } 1092 } 1093 1094 static int mv3310_set_tunable(struct phy_device *phydev, 1095 struct ethtool_tunable *tuna, const void *data) 1096 { 1097 switch (tuna->id) { 1098 case ETHTOOL_PHY_DOWNSHIFT: 1099 return mv3310_set_downshift(phydev, *(u8 *)data); 1100 case ETHTOOL_PHY_EDPD: 1101 return mv3310_set_edpd(phydev, *(u16 *)data); 1102 default: 1103 return -EOPNOTSUPP; 1104 } 1105 } 1106 1107 static bool mv3310_has_downshift(struct phy_device *phydev) 1108 { 1109 struct mv3310_priv *priv = dev_get_drvdata(&phydev->mdio.dev); 1110 1111 /* Fails to downshift with firmware older than v0.3.5.0 */ 1112 return priv->firmware_ver >= MV_VERSION(0,3,5,0); 1113 } 1114 1115 static void mv3310_init_supported_interfaces(unsigned long *mask) 1116 { 1117 __set_bit(PHY_INTERFACE_MODE_SGMII, mask); 1118 __set_bit(PHY_INTERFACE_MODE_2500BASEX, mask); 1119 __set_bit(PHY_INTERFACE_MODE_5GBASER, mask); 1120 __set_bit(PHY_INTERFACE_MODE_XAUI, mask); 1121 __set_bit(PHY_INTERFACE_MODE_RXAUI, mask); 1122 __set_bit(PHY_INTERFACE_MODE_10GBASER, mask); 1123 __set_bit(PHY_INTERFACE_MODE_USXGMII, mask); 1124 } 1125 1126 static void mv3340_init_supported_interfaces(unsigned long *mask) 1127 { 1128 __set_bit(PHY_INTERFACE_MODE_SGMII, mask); 1129 __set_bit(PHY_INTERFACE_MODE_2500BASEX, mask); 1130 __set_bit(PHY_INTERFACE_MODE_5GBASER, mask); 1131 __set_bit(PHY_INTERFACE_MODE_RXAUI, mask); 1132 __set_bit(PHY_INTERFACE_MODE_10GBASER, mask); 1133 __set_bit(PHY_INTERFACE_MODE_USXGMII, mask); 1134 } 1135 1136 static void mv2110_init_supported_interfaces(unsigned long *mask) 1137 { 1138 __set_bit(PHY_INTERFACE_MODE_SGMII, mask); 1139 __set_bit(PHY_INTERFACE_MODE_2500BASEX, mask); 1140 __set_bit(PHY_INTERFACE_MODE_5GBASER, mask); 1141 __set_bit(PHY_INTERFACE_MODE_10GBASER, mask); 1142 __set_bit(PHY_INTERFACE_MODE_USXGMII, mask); 1143 } 1144 1145 static void mv2111_init_supported_interfaces(unsigned long *mask) 1146 { 1147 __set_bit(PHY_INTERFACE_MODE_SGMII, mask); 1148 __set_bit(PHY_INTERFACE_MODE_2500BASEX, mask); 1149 __set_bit(PHY_INTERFACE_MODE_10GBASER, mask); 1150 __set_bit(PHY_INTERFACE_MODE_USXGMII, mask); 1151 } 1152 1153 static const struct mv3310_chip mv3310_type = { 1154 .has_downshift = mv3310_has_downshift, 1155 .init_supported_interfaces = mv3310_init_supported_interfaces, 1156 .get_mactype = mv3310_get_mactype, 1157 .set_mactype = mv3310_set_mactype, 1158 .select_mactype = mv3310_select_mactype, 1159 .init_interface = mv3310_init_interface, 1160 1161 #ifdef CONFIG_HWMON 1162 .hwmon_read_temp_reg = mv3310_hwmon_read_temp_reg, 1163 #endif 1164 }; 1165 1166 static const struct mv3310_chip mv3340_type = { 1167 .has_downshift = mv3310_has_downshift, 1168 .init_supported_interfaces = mv3340_init_supported_interfaces, 1169 .get_mactype = mv3310_get_mactype, 1170 .set_mactype = mv3310_set_mactype, 1171 .select_mactype = mv3310_select_mactype, 1172 .init_interface = mv3340_init_interface, 1173 1174 #ifdef CONFIG_HWMON 1175 .hwmon_read_temp_reg = mv3310_hwmon_read_temp_reg, 1176 #endif 1177 }; 1178 1179 static const struct mv3310_chip mv2110_type = { 1180 .init_supported_interfaces = mv2110_init_supported_interfaces, 1181 .get_mactype = mv2110_get_mactype, 1182 .set_mactype = mv2110_set_mactype, 1183 .select_mactype = mv2110_select_mactype, 1184 .init_interface = mv2110_init_interface, 1185 1186 #ifdef CONFIG_HWMON 1187 .hwmon_read_temp_reg = mv2110_hwmon_read_temp_reg, 1188 #endif 1189 }; 1190 1191 static const struct mv3310_chip mv2111_type = { 1192 .init_supported_interfaces = mv2111_init_supported_interfaces, 1193 .get_mactype = mv2110_get_mactype, 1194 .set_mactype = mv2110_set_mactype, 1195 .select_mactype = mv2110_select_mactype, 1196 .init_interface = mv2110_init_interface, 1197 1198 #ifdef CONFIG_HWMON 1199 .hwmon_read_temp_reg = mv2110_hwmon_read_temp_reg, 1200 #endif 1201 }; 1202 1203 static int mv3310_get_number_of_ports(struct phy_device *phydev) 1204 { 1205 int ret; 1206 1207 ret = phy_read_mmd(phydev, MDIO_MMD_PCS, MV_PCS_PORT_INFO); 1208 if (ret < 0) 1209 return ret; 1210 1211 ret &= MV_PCS_PORT_INFO_NPORTS_MASK; 1212 ret >>= MV_PCS_PORT_INFO_NPORTS_SHIFT; 1213 1214 return ret + 1; 1215 } 1216 1217 static int mv3310_match_phy_device(struct phy_device *phydev) 1218 { 1219 if ((phydev->c45_ids.device_ids[MDIO_MMD_PMAPMD] & 1220 MARVELL_PHY_ID_MASK) != MARVELL_PHY_ID_88X3310) 1221 return 0; 1222 1223 return mv3310_get_number_of_ports(phydev) == 1; 1224 } 1225 1226 static int mv3340_match_phy_device(struct phy_device *phydev) 1227 { 1228 if ((phydev->c45_ids.device_ids[MDIO_MMD_PMAPMD] & 1229 MARVELL_PHY_ID_MASK) != MARVELL_PHY_ID_88X3310) 1230 return 0; 1231 1232 return mv3310_get_number_of_ports(phydev) == 4; 1233 } 1234 1235 static int mv211x_match_phy_device(struct phy_device *phydev, bool has_5g) 1236 { 1237 int val; 1238 1239 if ((phydev->c45_ids.device_ids[MDIO_MMD_PMAPMD] & 1240 MARVELL_PHY_ID_MASK) != MARVELL_PHY_ID_88E2110) 1241 return 0; 1242 1243 val = phy_read_mmd(phydev, MDIO_MMD_PCS, MDIO_SPEED); 1244 if (val < 0) 1245 return val; 1246 1247 return !!(val & MDIO_PCS_SPEED_5G) == has_5g; 1248 } 1249 1250 static int mv2110_match_phy_device(struct phy_device *phydev) 1251 { 1252 return mv211x_match_phy_device(phydev, true); 1253 } 1254 1255 static int mv2111_match_phy_device(struct phy_device *phydev) 1256 { 1257 return mv211x_match_phy_device(phydev, false); 1258 } 1259 1260 static void mv3110_get_wol(struct phy_device *phydev, 1261 struct ethtool_wolinfo *wol) 1262 { 1263 int ret; 1264 1265 wol->supported = WAKE_MAGIC; 1266 wol->wolopts = 0; 1267 1268 ret = phy_read_mmd(phydev, MDIO_MMD_VEND2, MV_V2_WOL_CTRL); 1269 if (ret < 0) 1270 return; 1271 1272 if (ret & MV_V2_WOL_CTRL_MAGIC_PKT_EN) 1273 wol->wolopts |= WAKE_MAGIC; 1274 } 1275 1276 static int mv3110_set_wol(struct phy_device *phydev, 1277 struct ethtool_wolinfo *wol) 1278 { 1279 int ret; 1280 1281 if (wol->wolopts & WAKE_MAGIC) { 1282 /* Enable the WOL interrupt */ 1283 ret = phy_set_bits_mmd(phydev, MDIO_MMD_VEND2, 1284 MV_V2_PORT_INTR_MASK, 1285 MV_V2_PORT_INTR_STS_WOL_EN); 1286 if (ret < 0) 1287 return ret; 1288 1289 /* Store the device address for the magic packet */ 1290 ret = phy_write_mmd(phydev, MDIO_MMD_VEND2, 1291 MV_V2_MAGIC_PKT_WORD2, 1292 ((phydev->attached_dev->dev_addr[5] << 8) | 1293 phydev->attached_dev->dev_addr[4])); 1294 if (ret < 0) 1295 return ret; 1296 1297 ret = phy_write_mmd(phydev, MDIO_MMD_VEND2, 1298 MV_V2_MAGIC_PKT_WORD1, 1299 ((phydev->attached_dev->dev_addr[3] << 8) | 1300 phydev->attached_dev->dev_addr[2])); 1301 if (ret < 0) 1302 return ret; 1303 1304 ret = phy_write_mmd(phydev, MDIO_MMD_VEND2, 1305 MV_V2_MAGIC_PKT_WORD0, 1306 ((phydev->attached_dev->dev_addr[1] << 8) | 1307 phydev->attached_dev->dev_addr[0])); 1308 if (ret < 0) 1309 return ret; 1310 1311 /* Clear WOL status and enable magic packet matching */ 1312 ret = phy_set_bits_mmd(phydev, MDIO_MMD_VEND2, 1313 MV_V2_WOL_CTRL, 1314 MV_V2_WOL_CTRL_MAGIC_PKT_EN | 1315 MV_V2_WOL_CTRL_CLEAR_STS); 1316 if (ret < 0) 1317 return ret; 1318 } else { 1319 /* Disable magic packet matching & reset WOL status bit */ 1320 ret = phy_modify_mmd(phydev, MDIO_MMD_VEND2, 1321 MV_V2_WOL_CTRL, 1322 MV_V2_WOL_CTRL_MAGIC_PKT_EN, 1323 MV_V2_WOL_CTRL_CLEAR_STS); 1324 if (ret < 0) 1325 return ret; 1326 } 1327 1328 /* Reset the clear WOL status bit as it does not self-clear */ 1329 return phy_clear_bits_mmd(phydev, MDIO_MMD_VEND2, 1330 MV_V2_WOL_CTRL, 1331 MV_V2_WOL_CTRL_CLEAR_STS); 1332 } 1333 1334 static struct phy_driver mv3310_drivers[] = { 1335 { 1336 .phy_id = MARVELL_PHY_ID_88X3310, 1337 .phy_id_mask = MARVELL_PHY_ID_MASK, 1338 .match_phy_device = mv3310_match_phy_device, 1339 .name = "mv88x3310", 1340 .driver_data = &mv3310_type, 1341 .get_features = mv3310_get_features, 1342 .config_init = mv3310_config_init, 1343 .probe = mv3310_probe, 1344 .suspend = mv3310_suspend, 1345 .resume = mv3310_resume, 1346 .config_aneg = mv3310_config_aneg, 1347 .aneg_done = mv3310_aneg_done, 1348 .read_status = mv3310_read_status, 1349 .get_tunable = mv3310_get_tunable, 1350 .set_tunable = mv3310_set_tunable, 1351 .remove = mv3310_remove, 1352 .set_loopback = genphy_c45_loopback, 1353 .get_wol = mv3110_get_wol, 1354 .set_wol = mv3110_set_wol, 1355 }, 1356 { 1357 .phy_id = MARVELL_PHY_ID_88X3310, 1358 .phy_id_mask = MARVELL_PHY_ID_MASK, 1359 .match_phy_device = mv3340_match_phy_device, 1360 .name = "mv88x3340", 1361 .driver_data = &mv3340_type, 1362 .get_features = mv3310_get_features, 1363 .config_init = mv3310_config_init, 1364 .probe = mv3310_probe, 1365 .suspend = mv3310_suspend, 1366 .resume = mv3310_resume, 1367 .config_aneg = mv3310_config_aneg, 1368 .aneg_done = mv3310_aneg_done, 1369 .read_status = mv3310_read_status, 1370 .get_tunable = mv3310_get_tunable, 1371 .set_tunable = mv3310_set_tunable, 1372 .remove = mv3310_remove, 1373 .set_loopback = genphy_c45_loopback, 1374 }, 1375 { 1376 .phy_id = MARVELL_PHY_ID_88E2110, 1377 .phy_id_mask = MARVELL_PHY_ID_MASK, 1378 .match_phy_device = mv2110_match_phy_device, 1379 .name = "mv88e2110", 1380 .driver_data = &mv2110_type, 1381 .probe = mv3310_probe, 1382 .suspend = mv3310_suspend, 1383 .resume = mv3310_resume, 1384 .config_init = mv3310_config_init, 1385 .config_aneg = mv3310_config_aneg, 1386 .aneg_done = mv3310_aneg_done, 1387 .read_status = mv3310_read_status, 1388 .get_tunable = mv3310_get_tunable, 1389 .set_tunable = mv3310_set_tunable, 1390 .remove = mv3310_remove, 1391 .set_loopback = genphy_c45_loopback, 1392 .get_wol = mv3110_get_wol, 1393 .set_wol = mv3110_set_wol, 1394 }, 1395 { 1396 .phy_id = MARVELL_PHY_ID_88E2110, 1397 .phy_id_mask = MARVELL_PHY_ID_MASK, 1398 .match_phy_device = mv2111_match_phy_device, 1399 .name = "mv88e2111", 1400 .driver_data = &mv2111_type, 1401 .probe = mv3310_probe, 1402 .suspend = mv3310_suspend, 1403 .resume = mv3310_resume, 1404 .config_init = mv3310_config_init, 1405 .config_aneg = mv3310_config_aneg, 1406 .aneg_done = mv3310_aneg_done, 1407 .read_status = mv3310_read_status, 1408 .get_tunable = mv3310_get_tunable, 1409 .set_tunable = mv3310_set_tunable, 1410 .remove = mv3310_remove, 1411 .set_loopback = genphy_c45_loopback, 1412 }, 1413 }; 1414 1415 module_phy_driver(mv3310_drivers); 1416 1417 static struct mdio_device_id __maybe_unused mv3310_tbl[] = { 1418 { MARVELL_PHY_ID_88X3310, MARVELL_PHY_ID_MASK }, 1419 { MARVELL_PHY_ID_88E2110, MARVELL_PHY_ID_MASK }, 1420 { }, 1421 }; 1422 MODULE_DEVICE_TABLE(mdio, mv3310_tbl); 1423 MODULE_DESCRIPTION("Marvell Alaska X/M multi-gigabit Ethernet PHY driver"); 1424 MODULE_LICENSE("GPL"); 1425