1 /* 2 * drivers/net/phy/lxt.c 3 * 4 * Driver for Intel LXT PHYs 5 * 6 * Author: Andy Fleming 7 * 8 * Copyright (c) 2004 Freescale Semiconductor, Inc. 9 * 10 * This program is free software; you can redistribute it and/or modify it 11 * under the terms of the GNU General Public License as published by the 12 * Free Software Foundation; either version 2 of the License, or (at your 13 * option) any later version. 14 * 15 */ 16 #include <linux/kernel.h> 17 #include <linux/string.h> 18 #include <linux/errno.h> 19 #include <linux/unistd.h> 20 #include <linux/interrupt.h> 21 #include <linux/init.h> 22 #include <linux/delay.h> 23 #include <linux/netdevice.h> 24 #include <linux/etherdevice.h> 25 #include <linux/skbuff.h> 26 #include <linux/spinlock.h> 27 #include <linux/mm.h> 28 #include <linux/module.h> 29 #include <linux/mii.h> 30 #include <linux/ethtool.h> 31 #include <linux/phy.h> 32 33 #include <asm/io.h> 34 #include <asm/irq.h> 35 #include <asm/uaccess.h> 36 37 /* The Level one LXT970 is used by many boards */ 38 39 #define MII_LXT970_IER 17 /* Interrupt Enable Register */ 40 41 #define MII_LXT970_IER_IEN 0x0002 42 43 #define MII_LXT970_ISR 18 /* Interrupt Status Register */ 44 45 #define MII_LXT970_CONFIG 19 /* Configuration Register */ 46 47 /* ------------------------------------------------------------------------- */ 48 /* The Level one LXT971 is used on some of my custom boards */ 49 50 /* register definitions for the 971 */ 51 #define MII_LXT971_IER 18 /* Interrupt Enable Register */ 52 #define MII_LXT971_IER_IEN 0x00f2 53 54 #define MII_LXT971_ISR 19 /* Interrupt Status Register */ 55 56 /* register definitions for the 973 */ 57 #define MII_LXT973_PCR 16 /* Port Configuration Register */ 58 #define PCR_FIBER_SELECT 1 59 60 MODULE_DESCRIPTION("Intel LXT PHY driver"); 61 MODULE_AUTHOR("Andy Fleming"); 62 MODULE_LICENSE("GPL"); 63 64 static int lxt970_ack_interrupt(struct phy_device *phydev) 65 { 66 int err; 67 68 err = phy_read(phydev, MII_BMSR); 69 70 if (err < 0) 71 return err; 72 73 err = phy_read(phydev, MII_LXT970_ISR); 74 75 if (err < 0) 76 return err; 77 78 return 0; 79 } 80 81 static int lxt970_config_intr(struct phy_device *phydev) 82 { 83 int err; 84 85 if (phydev->interrupts == PHY_INTERRUPT_ENABLED) 86 err = phy_write(phydev, MII_LXT970_IER, MII_LXT970_IER_IEN); 87 else 88 err = phy_write(phydev, MII_LXT970_IER, 0); 89 90 return err; 91 } 92 93 static int lxt970_config_init(struct phy_device *phydev) 94 { 95 int err; 96 97 err = phy_write(phydev, MII_LXT970_CONFIG, 0); 98 99 return err; 100 } 101 102 103 static int lxt971_ack_interrupt(struct phy_device *phydev) 104 { 105 int err = phy_read(phydev, MII_LXT971_ISR); 106 107 if (err < 0) 108 return err; 109 110 return 0; 111 } 112 113 static int lxt971_config_intr(struct phy_device *phydev) 114 { 115 int err; 116 117 if (phydev->interrupts == PHY_INTERRUPT_ENABLED) 118 err = phy_write(phydev, MII_LXT971_IER, MII_LXT971_IER_IEN); 119 else 120 err = phy_write(phydev, MII_LXT971_IER, 0); 121 122 return err; 123 } 124 125 /* 126 * A2 version of LXT973 chip has an ERRATA: it randomly return the contents 127 * of the previous even register when you read a odd register regularly 128 */ 129 130 static int lxt973a2_update_link(struct phy_device *phydev) 131 { 132 int status; 133 int control; 134 int retry = 8; /* we try 8 times */ 135 136 /* Do a fake read */ 137 status = phy_read(phydev, MII_BMSR); 138 139 if (status < 0) 140 return status; 141 142 control = phy_read(phydev, MII_BMCR); 143 if (control < 0) 144 return control; 145 146 do { 147 /* Read link and autonegotiation status */ 148 status = phy_read(phydev, MII_BMSR); 149 } while (status >= 0 && retry-- && status == control); 150 151 if (status < 0) 152 return status; 153 154 if ((status & BMSR_LSTATUS) == 0) 155 phydev->link = 0; 156 else 157 phydev->link = 1; 158 159 return 0; 160 } 161 162 static int lxt973a2_read_status(struct phy_device *phydev) 163 { 164 int adv; 165 int err; 166 int lpa; 167 int lpagb = 0; 168 169 /* Update the link, but return if there was an error */ 170 err = lxt973a2_update_link(phydev); 171 if (err) 172 return err; 173 174 if (AUTONEG_ENABLE == phydev->autoneg) { 175 int retry = 1; 176 177 adv = phy_read(phydev, MII_ADVERTISE); 178 179 if (adv < 0) 180 return adv; 181 182 do { 183 lpa = phy_read(phydev, MII_LPA); 184 185 if (lpa < 0) 186 return lpa; 187 188 /* If both registers are equal, it is suspect but not 189 * impossible, hence a new try 190 */ 191 } while (lpa == adv && retry--); 192 193 lpa &= adv; 194 195 phydev->speed = SPEED_10; 196 phydev->duplex = DUPLEX_HALF; 197 phydev->pause = phydev->asym_pause = 0; 198 199 if (lpagb & (LPA_1000FULL | LPA_1000HALF)) { 200 phydev->speed = SPEED_1000; 201 202 if (lpagb & LPA_1000FULL) 203 phydev->duplex = DUPLEX_FULL; 204 } else if (lpa & (LPA_100FULL | LPA_100HALF)) { 205 phydev->speed = SPEED_100; 206 207 if (lpa & LPA_100FULL) 208 phydev->duplex = DUPLEX_FULL; 209 } else { 210 if (lpa & LPA_10FULL) 211 phydev->duplex = DUPLEX_FULL; 212 } 213 214 if (phydev->duplex == DUPLEX_FULL) { 215 phydev->pause = lpa & LPA_PAUSE_CAP ? 1 : 0; 216 phydev->asym_pause = lpa & LPA_PAUSE_ASYM ? 1 : 0; 217 } 218 } else { 219 int bmcr = phy_read(phydev, MII_BMCR); 220 221 if (bmcr < 0) 222 return bmcr; 223 224 if (bmcr & BMCR_FULLDPLX) 225 phydev->duplex = DUPLEX_FULL; 226 else 227 phydev->duplex = DUPLEX_HALF; 228 229 if (bmcr & BMCR_SPEED1000) 230 phydev->speed = SPEED_1000; 231 else if (bmcr & BMCR_SPEED100) 232 phydev->speed = SPEED_100; 233 else 234 phydev->speed = SPEED_10; 235 236 phydev->pause = phydev->asym_pause = 0; 237 } 238 239 return 0; 240 } 241 242 static int lxt973_probe(struct phy_device *phydev) 243 { 244 int val = phy_read(phydev, MII_LXT973_PCR); 245 246 if (val & PCR_FIBER_SELECT) { 247 /* 248 * If fiber is selected, then the only correct setting 249 * is 100Mbps, full duplex, and auto negotiation off. 250 */ 251 val = phy_read(phydev, MII_BMCR); 252 val |= (BMCR_SPEED100 | BMCR_FULLDPLX); 253 val &= ~BMCR_ANENABLE; 254 phy_write(phydev, MII_BMCR, val); 255 /* Remember that the port is in fiber mode. */ 256 phydev->priv = lxt973_probe; 257 } else { 258 phydev->priv = NULL; 259 } 260 return 0; 261 } 262 263 static int lxt973_config_aneg(struct phy_device *phydev) 264 { 265 /* Do nothing if port is in fiber mode. */ 266 return phydev->priv ? 0 : genphy_config_aneg(phydev); 267 } 268 269 static struct phy_driver lxt97x_driver[] = { 270 { 271 .phy_id = 0x78100000, 272 .name = "LXT970", 273 .phy_id_mask = 0xfffffff0, 274 .features = PHY_BASIC_FEATURES, 275 .flags = PHY_HAS_INTERRUPT, 276 .config_init = lxt970_config_init, 277 .config_aneg = genphy_config_aneg, 278 .read_status = genphy_read_status, 279 .ack_interrupt = lxt970_ack_interrupt, 280 .config_intr = lxt970_config_intr, 281 .driver = { .owner = THIS_MODULE,}, 282 }, { 283 .phy_id = 0x001378e0, 284 .name = "LXT971", 285 .phy_id_mask = 0xfffffff0, 286 .features = PHY_BASIC_FEATURES, 287 .flags = PHY_HAS_INTERRUPT, 288 .config_aneg = genphy_config_aneg, 289 .read_status = genphy_read_status, 290 .ack_interrupt = lxt971_ack_interrupt, 291 .config_intr = lxt971_config_intr, 292 .driver = { .owner = THIS_MODULE,}, 293 }, { 294 .phy_id = 0x00137a10, 295 .name = "LXT973-A2", 296 .phy_id_mask = 0xffffffff, 297 .features = PHY_BASIC_FEATURES, 298 .flags = 0, 299 .probe = lxt973_probe, 300 .config_aneg = lxt973_config_aneg, 301 .read_status = lxt973a2_read_status, 302 .driver = { .owner = THIS_MODULE,}, 303 }, { 304 .phy_id = 0x00137a10, 305 .name = "LXT973", 306 .phy_id_mask = 0xfffffff0, 307 .features = PHY_BASIC_FEATURES, 308 .flags = 0, 309 .probe = lxt973_probe, 310 .config_aneg = lxt973_config_aneg, 311 .read_status = genphy_read_status, 312 .driver = { .owner = THIS_MODULE,}, 313 } }; 314 315 module_phy_driver(lxt97x_driver); 316 317 static struct mdio_device_id __maybe_unused lxt_tbl[] = { 318 { 0x78100000, 0xfffffff0 }, 319 { 0x001378e0, 0xfffffff0 }, 320 { 0x00137a10, 0xfffffff0 }, 321 { } 322 }; 323 324 MODULE_DEVICE_TABLE(mdio, lxt_tbl); 325