1 // SPDX-License-Identifier: GPL-2.0 2 /* Copyright (c) 2019 Baylibre, SAS. 3 * Author: Jerome Brunet <jbrunet@baylibre.com> 4 */ 5 6 #include <linux/bitfield.h> 7 #include <linux/clk.h> 8 #include <linux/clk-provider.h> 9 #include <linux/device.h> 10 #include <linux/io.h> 11 #include <linux/iopoll.h> 12 #include <linux/mdio-mux.h> 13 #include <linux/module.h> 14 #include <linux/phy.h> 15 #include <linux/platform_device.h> 16 17 #define ETH_PLL_STS 0x40 18 #define ETH_PLL_CTL0 0x44 19 #define PLL_CTL0_LOCK_DIG BIT(30) 20 #define PLL_CTL0_RST BIT(29) 21 #define PLL_CTL0_EN BIT(28) 22 #define PLL_CTL0_SEL BIT(23) 23 #define PLL_CTL0_N GENMASK(14, 10) 24 #define PLL_CTL0_M GENMASK(8, 0) 25 #define PLL_LOCK_TIMEOUT 1000000 26 #define PLL_MUX_NUM_PARENT 2 27 #define ETH_PLL_CTL1 0x48 28 #define ETH_PLL_CTL2 0x4c 29 #define ETH_PLL_CTL3 0x50 30 #define ETH_PLL_CTL4 0x54 31 #define ETH_PLL_CTL5 0x58 32 #define ETH_PLL_CTL6 0x5c 33 #define ETH_PLL_CTL7 0x60 34 35 #define ETH_PHY_CNTL0 0x80 36 #define EPHY_G12A_ID 0x33010180 37 #define ETH_PHY_CNTL1 0x84 38 #define PHY_CNTL1_ST_MODE GENMASK(2, 0) 39 #define PHY_CNTL1_ST_PHYADD GENMASK(7, 3) 40 #define EPHY_DFLT_ADD 8 41 #define PHY_CNTL1_MII_MODE GENMASK(15, 14) 42 #define EPHY_MODE_RMII 0x1 43 #define PHY_CNTL1_CLK_EN BIT(16) 44 #define PHY_CNTL1_CLKFREQ BIT(17) 45 #define PHY_CNTL1_PHY_ENB BIT(18) 46 #define ETH_PHY_CNTL2 0x88 47 #define PHY_CNTL2_USE_INTERNAL BIT(5) 48 #define PHY_CNTL2_SMI_SRC_MAC BIT(6) 49 #define PHY_CNTL2_RX_CLK_EPHY BIT(9) 50 51 #define MESON_G12A_MDIO_EXTERNAL_ID 0 52 #define MESON_G12A_MDIO_INTERNAL_ID 1 53 54 struct g12a_mdio_mux { 55 bool pll_is_enabled; 56 void __iomem *regs; 57 void *mux_handle; 58 struct clk *pclk; 59 struct clk *pll; 60 }; 61 62 struct g12a_ephy_pll { 63 void __iomem *base; 64 struct clk_hw hw; 65 }; 66 67 #define g12a_ephy_pll_to_dev(_hw) \ 68 container_of(_hw, struct g12a_ephy_pll, hw) 69 70 static unsigned long g12a_ephy_pll_recalc_rate(struct clk_hw *hw, 71 unsigned long parent_rate) 72 { 73 struct g12a_ephy_pll *pll = g12a_ephy_pll_to_dev(hw); 74 u32 val, m, n; 75 76 val = readl(pll->base + ETH_PLL_CTL0); 77 m = FIELD_GET(PLL_CTL0_M, val); 78 n = FIELD_GET(PLL_CTL0_N, val); 79 80 return parent_rate * m / n; 81 } 82 83 static int g12a_ephy_pll_enable(struct clk_hw *hw) 84 { 85 struct g12a_ephy_pll *pll = g12a_ephy_pll_to_dev(hw); 86 u32 val = readl(pll->base + ETH_PLL_CTL0); 87 88 /* Apply both enable an reset */ 89 val |= PLL_CTL0_RST | PLL_CTL0_EN; 90 writel(val, pll->base + ETH_PLL_CTL0); 91 92 /* Clear the reset to let PLL lock */ 93 val &= ~PLL_CTL0_RST; 94 writel(val, pll->base + ETH_PLL_CTL0); 95 96 /* Poll on the digital lock instead of the usual analog lock 97 * This is done because bit 31 is unreliable on some SoC. Bit 98 * 31 may indicate that the PLL is not lock even though the clock 99 * is actually running 100 */ 101 return readl_poll_timeout(pll->base + ETH_PLL_CTL0, val, 102 val & PLL_CTL0_LOCK_DIG, 0, PLL_LOCK_TIMEOUT); 103 } 104 105 static void g12a_ephy_pll_disable(struct clk_hw *hw) 106 { 107 struct g12a_ephy_pll *pll = g12a_ephy_pll_to_dev(hw); 108 u32 val; 109 110 val = readl(pll->base + ETH_PLL_CTL0); 111 val &= ~PLL_CTL0_EN; 112 val |= PLL_CTL0_RST; 113 writel(val, pll->base + ETH_PLL_CTL0); 114 } 115 116 static int g12a_ephy_pll_is_enabled(struct clk_hw *hw) 117 { 118 struct g12a_ephy_pll *pll = g12a_ephy_pll_to_dev(hw); 119 unsigned int val; 120 121 val = readl(pll->base + ETH_PLL_CTL0); 122 123 return (val & PLL_CTL0_LOCK_DIG) ? 1 : 0; 124 } 125 126 static int g12a_ephy_pll_init(struct clk_hw *hw) 127 { 128 struct g12a_ephy_pll *pll = g12a_ephy_pll_to_dev(hw); 129 130 /* Apply PLL HW settings */ 131 writel(0x29c0040a, pll->base + ETH_PLL_CTL0); 132 writel(0x927e0000, pll->base + ETH_PLL_CTL1); 133 writel(0xac5f49e5, pll->base + ETH_PLL_CTL2); 134 writel(0x00000000, pll->base + ETH_PLL_CTL3); 135 writel(0x00000000, pll->base + ETH_PLL_CTL4); 136 writel(0x20200000, pll->base + ETH_PLL_CTL5); 137 writel(0x0000c002, pll->base + ETH_PLL_CTL6); 138 writel(0x00000023, pll->base + ETH_PLL_CTL7); 139 140 return 0; 141 } 142 143 static const struct clk_ops g12a_ephy_pll_ops = { 144 .recalc_rate = g12a_ephy_pll_recalc_rate, 145 .is_enabled = g12a_ephy_pll_is_enabled, 146 .enable = g12a_ephy_pll_enable, 147 .disable = g12a_ephy_pll_disable, 148 .init = g12a_ephy_pll_init, 149 }; 150 151 static int g12a_enable_internal_mdio(struct g12a_mdio_mux *priv) 152 { 153 int ret; 154 155 /* Enable the phy clock */ 156 if (!priv->pll_is_enabled) { 157 ret = clk_prepare_enable(priv->pll); 158 if (ret) 159 return ret; 160 } 161 162 priv->pll_is_enabled = true; 163 164 /* Initialize ephy control */ 165 writel(EPHY_G12A_ID, priv->regs + ETH_PHY_CNTL0); 166 writel(FIELD_PREP(PHY_CNTL1_ST_MODE, 3) | 167 FIELD_PREP(PHY_CNTL1_ST_PHYADD, EPHY_DFLT_ADD) | 168 FIELD_PREP(PHY_CNTL1_MII_MODE, EPHY_MODE_RMII) | 169 PHY_CNTL1_CLK_EN | 170 PHY_CNTL1_CLKFREQ | 171 PHY_CNTL1_PHY_ENB, 172 priv->regs + ETH_PHY_CNTL1); 173 writel(PHY_CNTL2_USE_INTERNAL | 174 PHY_CNTL2_SMI_SRC_MAC | 175 PHY_CNTL2_RX_CLK_EPHY, 176 priv->regs + ETH_PHY_CNTL2); 177 178 return 0; 179 } 180 181 static int g12a_enable_external_mdio(struct g12a_mdio_mux *priv) 182 { 183 /* Reset the mdio bus mux */ 184 writel_relaxed(0x0, priv->regs + ETH_PHY_CNTL2); 185 186 /* Disable the phy clock if enabled */ 187 if (priv->pll_is_enabled) { 188 clk_disable_unprepare(priv->pll); 189 priv->pll_is_enabled = false; 190 } 191 192 return 0; 193 } 194 195 static int g12a_mdio_switch_fn(int current_child, int desired_child, 196 void *data) 197 { 198 struct g12a_mdio_mux *priv = dev_get_drvdata(data); 199 200 if (current_child == desired_child) 201 return 0; 202 203 switch (desired_child) { 204 case MESON_G12A_MDIO_EXTERNAL_ID: 205 return g12a_enable_external_mdio(priv); 206 case MESON_G12A_MDIO_INTERNAL_ID: 207 return g12a_enable_internal_mdio(priv); 208 default: 209 return -EINVAL; 210 } 211 } 212 213 static const struct of_device_id g12a_mdio_mux_match[] = { 214 { .compatible = "amlogic,g12a-mdio-mux", }, 215 {}, 216 }; 217 MODULE_DEVICE_TABLE(of, g12a_mdio_mux_match); 218 219 static int g12a_ephy_glue_clk_register(struct device *dev) 220 { 221 struct g12a_mdio_mux *priv = dev_get_drvdata(dev); 222 const char *parent_names[PLL_MUX_NUM_PARENT]; 223 struct clk_init_data init; 224 struct g12a_ephy_pll *pll; 225 struct clk_mux *mux; 226 struct clk *clk; 227 char *name; 228 int i; 229 230 /* get the mux parents */ 231 for (i = 0; i < PLL_MUX_NUM_PARENT; i++) { 232 char in_name[8]; 233 234 snprintf(in_name, sizeof(in_name), "clkin%d", i); 235 clk = devm_clk_get(dev, in_name); 236 if (IS_ERR(clk)) 237 return dev_err_probe(dev, PTR_ERR(clk), 238 "Missing clock %s\n", in_name); 239 240 parent_names[i] = __clk_get_name(clk); 241 } 242 243 /* create the input mux */ 244 mux = devm_kzalloc(dev, sizeof(*mux), GFP_KERNEL); 245 if (!mux) 246 return -ENOMEM; 247 248 name = kasprintf(GFP_KERNEL, "%s#mux", dev_name(dev)); 249 if (!name) 250 return -ENOMEM; 251 252 init.name = name; 253 init.ops = &clk_mux_ro_ops; 254 init.flags = 0; 255 init.parent_names = parent_names; 256 init.num_parents = PLL_MUX_NUM_PARENT; 257 258 mux->reg = priv->regs + ETH_PLL_CTL0; 259 mux->shift = __ffs(PLL_CTL0_SEL); 260 mux->mask = PLL_CTL0_SEL >> mux->shift; 261 mux->hw.init = &init; 262 263 clk = devm_clk_register(dev, &mux->hw); 264 kfree(name); 265 if (IS_ERR(clk)) { 266 dev_err(dev, "failed to register input mux\n"); 267 return PTR_ERR(clk); 268 } 269 270 /* create the pll */ 271 pll = devm_kzalloc(dev, sizeof(*pll), GFP_KERNEL); 272 if (!pll) 273 return -ENOMEM; 274 275 name = kasprintf(GFP_KERNEL, "%s#pll", dev_name(dev)); 276 if (!name) 277 return -ENOMEM; 278 279 init.name = name; 280 init.ops = &g12a_ephy_pll_ops; 281 init.flags = 0; 282 parent_names[0] = __clk_get_name(clk); 283 init.parent_names = parent_names; 284 init.num_parents = 1; 285 286 pll->base = priv->regs; 287 pll->hw.init = &init; 288 289 clk = devm_clk_register(dev, &pll->hw); 290 kfree(name); 291 if (IS_ERR(clk)) { 292 dev_err(dev, "failed to register input mux\n"); 293 return PTR_ERR(clk); 294 } 295 296 priv->pll = clk; 297 298 return 0; 299 } 300 301 static int g12a_mdio_mux_probe(struct platform_device *pdev) 302 { 303 struct device *dev = &pdev->dev; 304 struct g12a_mdio_mux *priv; 305 int ret; 306 307 priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); 308 if (!priv) 309 return -ENOMEM; 310 311 platform_set_drvdata(pdev, priv); 312 313 priv->regs = devm_platform_ioremap_resource(pdev, 0); 314 if (IS_ERR(priv->regs)) 315 return PTR_ERR(priv->regs); 316 317 priv->pclk = devm_clk_get(dev, "pclk"); 318 if (IS_ERR(priv->pclk)) 319 return dev_err_probe(dev, PTR_ERR(priv->pclk), 320 "failed to get peripheral clock\n"); 321 322 /* Make sure the device registers are clocked */ 323 ret = clk_prepare_enable(priv->pclk); 324 if (ret) { 325 dev_err(dev, "failed to enable peripheral clock"); 326 return ret; 327 } 328 329 /* Register PLL in CCF */ 330 ret = g12a_ephy_glue_clk_register(dev); 331 if (ret) 332 goto err; 333 334 ret = mdio_mux_init(dev, dev->of_node, g12a_mdio_switch_fn, 335 &priv->mux_handle, dev, NULL); 336 if (ret) { 337 dev_err_probe(dev, ret, "mdio multiplexer init failed\n"); 338 goto err; 339 } 340 341 return 0; 342 343 err: 344 clk_disable_unprepare(priv->pclk); 345 return ret; 346 } 347 348 static int g12a_mdio_mux_remove(struct platform_device *pdev) 349 { 350 struct g12a_mdio_mux *priv = platform_get_drvdata(pdev); 351 352 mdio_mux_uninit(priv->mux_handle); 353 354 if (priv->pll_is_enabled) 355 clk_disable_unprepare(priv->pll); 356 357 clk_disable_unprepare(priv->pclk); 358 359 return 0; 360 } 361 362 static struct platform_driver g12a_mdio_mux_driver = { 363 .probe = g12a_mdio_mux_probe, 364 .remove = g12a_mdio_mux_remove, 365 .driver = { 366 .name = "g12a-mdio_mux", 367 .of_match_table = g12a_mdio_mux_match, 368 }, 369 }; 370 module_platform_driver(g12a_mdio_mux_driver); 371 372 MODULE_DESCRIPTION("Amlogic G12a MDIO multiplexer driver"); 373 MODULE_AUTHOR("Jerome Brunet <jbrunet@baylibre.com>"); 374 MODULE_LICENSE("GPL v2"); 375