1 // SPDX-License-Identifier: GPL-2.0 2 /* Copyright (c) 2019 Baylibre, SAS. 3 * Author: Jerome Brunet <jbrunet@baylibre.com> 4 */ 5 6 #include <linux/bitfield.h> 7 #include <linux/delay.h> 8 #include <linux/clk.h> 9 #include <linux/clk-provider.h> 10 #include <linux/device.h> 11 #include <linux/io.h> 12 #include <linux/iopoll.h> 13 #include <linux/mdio-mux.h> 14 #include <linux/module.h> 15 #include <linux/phy.h> 16 #include <linux/platform_device.h> 17 18 #define ETH_PLL_STS 0x40 19 #define ETH_PLL_CTL0 0x44 20 #define PLL_CTL0_LOCK_DIG BIT(30) 21 #define PLL_CTL0_RST BIT(29) 22 #define PLL_CTL0_EN BIT(28) 23 #define PLL_CTL0_SEL BIT(23) 24 #define PLL_CTL0_N GENMASK(14, 10) 25 #define PLL_CTL0_M GENMASK(8, 0) 26 #define PLL_LOCK_TIMEOUT 1000000 27 #define PLL_MUX_NUM_PARENT 2 28 #define ETH_PLL_CTL1 0x48 29 #define ETH_PLL_CTL2 0x4c 30 #define ETH_PLL_CTL3 0x50 31 #define ETH_PLL_CTL4 0x54 32 #define ETH_PLL_CTL5 0x58 33 #define ETH_PLL_CTL6 0x5c 34 #define ETH_PLL_CTL7 0x60 35 36 #define ETH_PHY_CNTL0 0x80 37 #define EPHY_G12A_ID 0x33010180 38 #define ETH_PHY_CNTL1 0x84 39 #define PHY_CNTL1_ST_MODE GENMASK(2, 0) 40 #define PHY_CNTL1_ST_PHYADD GENMASK(7, 3) 41 #define EPHY_DFLT_ADD 8 42 #define PHY_CNTL1_MII_MODE GENMASK(15, 14) 43 #define EPHY_MODE_RMII 0x1 44 #define PHY_CNTL1_CLK_EN BIT(16) 45 #define PHY_CNTL1_CLKFREQ BIT(17) 46 #define PHY_CNTL1_PHY_ENB BIT(18) 47 #define ETH_PHY_CNTL2 0x88 48 #define PHY_CNTL2_USE_INTERNAL BIT(5) 49 #define PHY_CNTL2_SMI_SRC_MAC BIT(6) 50 #define PHY_CNTL2_RX_CLK_EPHY BIT(9) 51 52 #define MESON_G12A_MDIO_EXTERNAL_ID 0 53 #define MESON_G12A_MDIO_INTERNAL_ID 1 54 55 struct g12a_mdio_mux { 56 void __iomem *regs; 57 void *mux_handle; 58 struct clk *pll; 59 }; 60 61 struct g12a_ephy_pll { 62 void __iomem *base; 63 struct clk_hw hw; 64 }; 65 66 #define g12a_ephy_pll_to_dev(_hw) \ 67 container_of(_hw, struct g12a_ephy_pll, hw) 68 69 static unsigned long g12a_ephy_pll_recalc_rate(struct clk_hw *hw, 70 unsigned long parent_rate) 71 { 72 struct g12a_ephy_pll *pll = g12a_ephy_pll_to_dev(hw); 73 u32 val, m, n; 74 75 val = readl(pll->base + ETH_PLL_CTL0); 76 m = FIELD_GET(PLL_CTL0_M, val); 77 n = FIELD_GET(PLL_CTL0_N, val); 78 79 return parent_rate * m / n; 80 } 81 82 static int g12a_ephy_pll_enable(struct clk_hw *hw) 83 { 84 struct g12a_ephy_pll *pll = g12a_ephy_pll_to_dev(hw); 85 u32 val = readl(pll->base + ETH_PLL_CTL0); 86 87 /* Apply both enable an reset */ 88 val |= PLL_CTL0_RST | PLL_CTL0_EN; 89 writel(val, pll->base + ETH_PLL_CTL0); 90 91 /* Clear the reset to let PLL lock */ 92 val &= ~PLL_CTL0_RST; 93 writel(val, pll->base + ETH_PLL_CTL0); 94 95 /* Poll on the digital lock instead of the usual analog lock 96 * This is done because bit 31 is unreliable on some SoC. Bit 97 * 31 may indicate that the PLL is not lock even though the clock 98 * is actually running 99 */ 100 return readl_poll_timeout(pll->base + ETH_PLL_CTL0, val, 101 val & PLL_CTL0_LOCK_DIG, 0, PLL_LOCK_TIMEOUT); 102 } 103 104 static void g12a_ephy_pll_disable(struct clk_hw *hw) 105 { 106 struct g12a_ephy_pll *pll = g12a_ephy_pll_to_dev(hw); 107 u32 val; 108 109 val = readl(pll->base + ETH_PLL_CTL0); 110 val &= ~PLL_CTL0_EN; 111 val |= PLL_CTL0_RST; 112 writel(val, pll->base + ETH_PLL_CTL0); 113 } 114 115 static int g12a_ephy_pll_is_enabled(struct clk_hw *hw) 116 { 117 struct g12a_ephy_pll *pll = g12a_ephy_pll_to_dev(hw); 118 unsigned int val; 119 120 val = readl(pll->base + ETH_PLL_CTL0); 121 122 return (val & PLL_CTL0_LOCK_DIG) ? 1 : 0; 123 } 124 125 static int g12a_ephy_pll_init(struct clk_hw *hw) 126 { 127 struct g12a_ephy_pll *pll = g12a_ephy_pll_to_dev(hw); 128 129 /* Apply PLL HW settings */ 130 writel(0x29c0040a, pll->base + ETH_PLL_CTL0); 131 writel(0x927e0000, pll->base + ETH_PLL_CTL1); 132 writel(0xac5f49e5, pll->base + ETH_PLL_CTL2); 133 writel(0x00000000, pll->base + ETH_PLL_CTL3); 134 writel(0x00000000, pll->base + ETH_PLL_CTL4); 135 writel(0x20200000, pll->base + ETH_PLL_CTL5); 136 writel(0x0000c002, pll->base + ETH_PLL_CTL6); 137 writel(0x00000023, pll->base + ETH_PLL_CTL7); 138 139 return 0; 140 } 141 142 static const struct clk_ops g12a_ephy_pll_ops = { 143 .recalc_rate = g12a_ephy_pll_recalc_rate, 144 .is_enabled = g12a_ephy_pll_is_enabled, 145 .enable = g12a_ephy_pll_enable, 146 .disable = g12a_ephy_pll_disable, 147 .init = g12a_ephy_pll_init, 148 }; 149 150 static int g12a_enable_internal_mdio(struct g12a_mdio_mux *priv) 151 { 152 u32 value; 153 int ret; 154 155 /* Enable the phy clock */ 156 if (!__clk_is_enabled(priv->pll)) { 157 ret = clk_prepare_enable(priv->pll); 158 if (ret) 159 return ret; 160 } 161 162 /* Initialize ephy control */ 163 writel(EPHY_G12A_ID, priv->regs + ETH_PHY_CNTL0); 164 165 /* Make sure we get a 0 -> 1 transition on the enable bit */ 166 value = FIELD_PREP(PHY_CNTL1_ST_MODE, 3) | 167 FIELD_PREP(PHY_CNTL1_ST_PHYADD, EPHY_DFLT_ADD) | 168 FIELD_PREP(PHY_CNTL1_MII_MODE, EPHY_MODE_RMII) | 169 PHY_CNTL1_CLK_EN | 170 PHY_CNTL1_CLKFREQ; 171 writel(value, priv->regs + ETH_PHY_CNTL1); 172 writel(PHY_CNTL2_USE_INTERNAL | 173 PHY_CNTL2_SMI_SRC_MAC | 174 PHY_CNTL2_RX_CLK_EPHY, 175 priv->regs + ETH_PHY_CNTL2); 176 177 value |= PHY_CNTL1_PHY_ENB; 178 writel(value, priv->regs + ETH_PHY_CNTL1); 179 180 /* The phy needs a bit of time to power up */ 181 mdelay(10); 182 183 return 0; 184 } 185 186 static int g12a_enable_external_mdio(struct g12a_mdio_mux *priv) 187 { 188 /* Reset the mdio bus mux */ 189 writel_relaxed(0x0, priv->regs + ETH_PHY_CNTL2); 190 191 /* Disable the phy clock if enabled */ 192 if (__clk_is_enabled(priv->pll)) 193 clk_disable_unprepare(priv->pll); 194 195 return 0; 196 } 197 198 static int g12a_mdio_switch_fn(int current_child, int desired_child, 199 void *data) 200 { 201 struct g12a_mdio_mux *priv = dev_get_drvdata(data); 202 203 if (current_child == desired_child) 204 return 0; 205 206 switch (desired_child) { 207 case MESON_G12A_MDIO_EXTERNAL_ID: 208 return g12a_enable_external_mdio(priv); 209 case MESON_G12A_MDIO_INTERNAL_ID: 210 return g12a_enable_internal_mdio(priv); 211 default: 212 return -EINVAL; 213 } 214 } 215 216 static const struct of_device_id g12a_mdio_mux_match[] = { 217 { .compatible = "amlogic,g12a-mdio-mux", }, 218 {}, 219 }; 220 MODULE_DEVICE_TABLE(of, g12a_mdio_mux_match); 221 222 static int g12a_ephy_glue_clk_register(struct device *dev) 223 { 224 struct g12a_mdio_mux *priv = dev_get_drvdata(dev); 225 const char *parent_names[PLL_MUX_NUM_PARENT]; 226 struct clk_init_data init; 227 struct g12a_ephy_pll *pll; 228 struct clk_mux *mux; 229 struct clk *clk; 230 char *name; 231 int i; 232 233 /* get the mux parents */ 234 for (i = 0; i < PLL_MUX_NUM_PARENT; i++) { 235 char in_name[8]; 236 237 snprintf(in_name, sizeof(in_name), "clkin%d", i); 238 clk = devm_clk_get(dev, in_name); 239 if (IS_ERR(clk)) 240 return dev_err_probe(dev, PTR_ERR(clk), 241 "Missing clock %s\n", in_name); 242 243 parent_names[i] = __clk_get_name(clk); 244 } 245 246 /* create the input mux */ 247 mux = devm_kzalloc(dev, sizeof(*mux), GFP_KERNEL); 248 if (!mux) 249 return -ENOMEM; 250 251 name = kasprintf(GFP_KERNEL, "%s#mux", dev_name(dev)); 252 if (!name) 253 return -ENOMEM; 254 255 init.name = name; 256 init.ops = &clk_mux_ro_ops; 257 init.flags = 0; 258 init.parent_names = parent_names; 259 init.num_parents = PLL_MUX_NUM_PARENT; 260 261 mux->reg = priv->regs + ETH_PLL_CTL0; 262 mux->shift = __ffs(PLL_CTL0_SEL); 263 mux->mask = PLL_CTL0_SEL >> mux->shift; 264 mux->hw.init = &init; 265 266 clk = devm_clk_register(dev, &mux->hw); 267 kfree(name); 268 if (IS_ERR(clk)) { 269 dev_err(dev, "failed to register input mux\n"); 270 return PTR_ERR(clk); 271 } 272 273 /* create the pll */ 274 pll = devm_kzalloc(dev, sizeof(*pll), GFP_KERNEL); 275 if (!pll) 276 return -ENOMEM; 277 278 name = kasprintf(GFP_KERNEL, "%s#pll", dev_name(dev)); 279 if (!name) 280 return -ENOMEM; 281 282 init.name = name; 283 init.ops = &g12a_ephy_pll_ops; 284 init.flags = 0; 285 parent_names[0] = __clk_get_name(clk); 286 init.parent_names = parent_names; 287 init.num_parents = 1; 288 289 pll->base = priv->regs; 290 pll->hw.init = &init; 291 292 clk = devm_clk_register(dev, &pll->hw); 293 kfree(name); 294 if (IS_ERR(clk)) { 295 dev_err(dev, "failed to register input mux\n"); 296 return PTR_ERR(clk); 297 } 298 299 priv->pll = clk; 300 301 return 0; 302 } 303 304 static int g12a_mdio_mux_probe(struct platform_device *pdev) 305 { 306 struct device *dev = &pdev->dev; 307 struct g12a_mdio_mux *priv; 308 struct clk *pclk; 309 int ret; 310 311 priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); 312 if (!priv) 313 return -ENOMEM; 314 315 platform_set_drvdata(pdev, priv); 316 317 priv->regs = devm_platform_ioremap_resource(pdev, 0); 318 if (IS_ERR(priv->regs)) 319 return PTR_ERR(priv->regs); 320 321 pclk = devm_clk_get_enabled(dev, "pclk"); 322 if (IS_ERR(pclk)) 323 return dev_err_probe(dev, PTR_ERR(pclk), 324 "failed to get peripheral clock\n"); 325 326 /* Register PLL in CCF */ 327 ret = g12a_ephy_glue_clk_register(dev); 328 if (ret) 329 return ret; 330 331 ret = mdio_mux_init(dev, dev->of_node, g12a_mdio_switch_fn, 332 &priv->mux_handle, dev, NULL); 333 if (ret) 334 dev_err_probe(dev, ret, "mdio multiplexer init failed\n"); 335 336 return ret; 337 } 338 339 static void g12a_mdio_mux_remove(struct platform_device *pdev) 340 { 341 struct g12a_mdio_mux *priv = platform_get_drvdata(pdev); 342 343 mdio_mux_uninit(priv->mux_handle); 344 345 if (__clk_is_enabled(priv->pll)) 346 clk_disable_unprepare(priv->pll); 347 } 348 349 static struct platform_driver g12a_mdio_mux_driver = { 350 .probe = g12a_mdio_mux_probe, 351 .remove = g12a_mdio_mux_remove, 352 .driver = { 353 .name = "g12a-mdio_mux", 354 .of_match_table = g12a_mdio_mux_match, 355 }, 356 }; 357 module_platform_driver(g12a_mdio_mux_driver); 358 359 MODULE_DESCRIPTION("Amlogic G12a MDIO multiplexer driver"); 360 MODULE_AUTHOR("Jerome Brunet <jbrunet@baylibre.com>"); 361 MODULE_LICENSE("GPL v2"); 362