1 // SPDX-License-Identifier: GPL-2.0+ 2 /* 3 * Broadcom UniMAC MDIO bus controller driver 4 * 5 * Copyright (C) 2014-2017 Broadcom 6 */ 7 8 #include <linux/clk.h> 9 #include <linux/delay.h> 10 #include <linux/io.h> 11 #include <linux/kernel.h> 12 #include <linux/module.h> 13 #include <linux/of.h> 14 #include <linux/of_mdio.h> 15 #include <linux/of_platform.h> 16 #include <linux/phy.h> 17 #include <linux/platform_data/mdio-bcm-unimac.h> 18 #include <linux/platform_device.h> 19 #include <linux/sched.h> 20 21 #define MDIO_CMD 0x00 22 #define MDIO_START_BUSY (1 << 29) 23 #define MDIO_READ_FAIL (1 << 28) 24 #define MDIO_RD (2 << 26) 25 #define MDIO_WR (1 << 26) 26 #define MDIO_PMD_SHIFT 21 27 #define MDIO_PMD_MASK 0x1F 28 #define MDIO_REG_SHIFT 16 29 #define MDIO_REG_MASK 0x1F 30 31 #define MDIO_CFG 0x04 32 #define MDIO_C22 (1 << 0) 33 #define MDIO_C45 0 34 #define MDIO_CLK_DIV_SHIFT 4 35 #define MDIO_CLK_DIV_MASK 0x3F 36 #define MDIO_SUPP_PREAMBLE (1 << 12) 37 38 struct unimac_mdio_priv { 39 struct mii_bus *mii_bus; 40 void __iomem *base; 41 int (*wait_func) (void *wait_func_data); 42 void *wait_func_data; 43 struct clk *clk; 44 u32 clk_freq; 45 }; 46 47 static inline u32 unimac_mdio_readl(struct unimac_mdio_priv *priv, u32 offset) 48 { 49 /* MIPS chips strapped for BE will automagically configure the 50 * peripheral registers for CPU-native byte order. 51 */ 52 if (IS_ENABLED(CONFIG_MIPS) && IS_ENABLED(CONFIG_CPU_BIG_ENDIAN)) 53 return __raw_readl(priv->base + offset); 54 else 55 return readl_relaxed(priv->base + offset); 56 } 57 58 static inline void unimac_mdio_writel(struct unimac_mdio_priv *priv, u32 val, 59 u32 offset) 60 { 61 if (IS_ENABLED(CONFIG_MIPS) && IS_ENABLED(CONFIG_CPU_BIG_ENDIAN)) 62 __raw_writel(val, priv->base + offset); 63 else 64 writel_relaxed(val, priv->base + offset); 65 } 66 67 static inline void unimac_mdio_start(struct unimac_mdio_priv *priv) 68 { 69 u32 reg; 70 71 reg = unimac_mdio_readl(priv, MDIO_CMD); 72 reg |= MDIO_START_BUSY; 73 unimac_mdio_writel(priv, reg, MDIO_CMD); 74 } 75 76 static int unimac_mdio_poll(void *wait_func_data) 77 { 78 struct unimac_mdio_priv *priv = wait_func_data; 79 u32 val; 80 81 /* 82 * C22 transactions should take ~25 usec, will need to adjust 83 * if C45 support is added. 84 */ 85 udelay(30); 86 87 return read_poll_timeout(unimac_mdio_readl, val, !(val & MDIO_START_BUSY), 88 2000, 100000, false, priv, MDIO_CMD); 89 } 90 91 static int unimac_mdio_read(struct mii_bus *bus, int phy_id, int reg) 92 { 93 struct unimac_mdio_priv *priv = bus->priv; 94 int ret; 95 u32 cmd; 96 97 ret = clk_prepare_enable(priv->clk); 98 if (ret) 99 return ret; 100 101 /* Prepare the read operation */ 102 cmd = MDIO_RD | (phy_id << MDIO_PMD_SHIFT) | (reg << MDIO_REG_SHIFT); 103 unimac_mdio_writel(priv, cmd, MDIO_CMD); 104 105 /* Start MDIO transaction */ 106 unimac_mdio_start(priv); 107 108 ret = priv->wait_func(priv->wait_func_data); 109 if (ret) 110 goto out; 111 112 cmd = unimac_mdio_readl(priv, MDIO_CMD); 113 114 /* Some broken devices are known not to release the line during 115 * turn-around, e.g: Broadcom BCM53125 external switches, so check for 116 * that condition here and ignore the MDIO controller read failure 117 * indication. 118 */ 119 if (!(bus->phy_ignore_ta_mask & 1 << phy_id) && (cmd & MDIO_READ_FAIL)) { 120 ret = -EIO; 121 goto out; 122 } 123 124 ret = cmd & 0xffff; 125 out: 126 clk_disable_unprepare(priv->clk); 127 return ret; 128 } 129 130 static int unimac_mdio_write(struct mii_bus *bus, int phy_id, 131 int reg, u16 val) 132 { 133 struct unimac_mdio_priv *priv = bus->priv; 134 u32 cmd; 135 int ret; 136 137 ret = clk_prepare_enable(priv->clk); 138 if (ret) 139 return ret; 140 141 /* Prepare the write operation */ 142 cmd = MDIO_WR | (phy_id << MDIO_PMD_SHIFT) | 143 (reg << MDIO_REG_SHIFT) | (0xffff & val); 144 unimac_mdio_writel(priv, cmd, MDIO_CMD); 145 146 unimac_mdio_start(priv); 147 148 ret = priv->wait_func(priv->wait_func_data); 149 clk_disable_unprepare(priv->clk); 150 151 return ret; 152 } 153 154 /* Workaround for integrated BCM7xxx Gigabit PHYs which have a problem with 155 * their internal MDIO management controller making them fail to successfully 156 * be read from or written to for the first transaction. We insert a dummy 157 * BMSR read here to make sure that phy_get_device() and get_phy_id() can 158 * correctly read the PHY MII_PHYSID1/2 registers and successfully register a 159 * PHY device for this peripheral. 160 * 161 * Once the PHY driver is registered, we can workaround subsequent reads from 162 * there (e.g: during system-wide power management). 163 * 164 * bus->reset is invoked before mdiobus_scan during mdiobus_register and is 165 * therefore the right location to stick that workaround. Since we do not want 166 * to read from non-existing PHYs, we either use bus->phy_mask or do a manual 167 * Device Tree scan to limit the search area. 168 */ 169 static int unimac_mdio_reset(struct mii_bus *bus) 170 { 171 struct device_node *np = bus->dev.of_node; 172 struct device_node *child; 173 u32 read_mask = 0; 174 int addr; 175 176 if (!np) { 177 read_mask = ~bus->phy_mask; 178 } else { 179 for_each_available_child_of_node(np, child) { 180 addr = of_mdio_parse_addr(&bus->dev, child); 181 if (addr < 0) 182 continue; 183 184 read_mask |= 1 << addr; 185 } 186 } 187 188 for (addr = 0; addr < PHY_MAX_ADDR; addr++) { 189 if (read_mask & 1 << addr) { 190 dev_dbg(&bus->dev, "Workaround for PHY @ %d\n", addr); 191 mdiobus_read(bus, addr, MII_BMSR); 192 } 193 } 194 195 return 0; 196 } 197 198 static int unimac_mdio_clk_set(struct unimac_mdio_priv *priv) 199 { 200 unsigned long rate; 201 u32 reg, div; 202 int ret; 203 204 /* Keep the hardware default values */ 205 if (!priv->clk_freq) 206 return 0; 207 208 ret = clk_prepare_enable(priv->clk); 209 if (ret) 210 return ret; 211 212 rate = clk_get_rate(priv->clk); 213 if (!rate) 214 rate = 250000000; 215 216 div = (rate / (2 * priv->clk_freq)) - 1; 217 if (div & ~MDIO_CLK_DIV_MASK) { 218 pr_warn("Incorrect MDIO clock frequency, ignoring\n"); 219 ret = 0; 220 goto out; 221 } 222 223 /* The MDIO clock is the reference clock (typically 250Mhz) divided by 224 * 2 x (MDIO_CLK_DIV + 1) 225 */ 226 reg = unimac_mdio_readl(priv, MDIO_CFG); 227 reg &= ~(MDIO_CLK_DIV_MASK << MDIO_CLK_DIV_SHIFT); 228 reg |= div << MDIO_CLK_DIV_SHIFT; 229 unimac_mdio_writel(priv, reg, MDIO_CFG); 230 out: 231 clk_disable_unprepare(priv->clk); 232 return ret; 233 } 234 235 static int unimac_mdio_probe(struct platform_device *pdev) 236 { 237 struct unimac_mdio_pdata *pdata = pdev->dev.platform_data; 238 struct unimac_mdio_priv *priv; 239 struct device_node *np; 240 struct mii_bus *bus; 241 struct resource *r; 242 int ret; 243 244 np = pdev->dev.of_node; 245 246 priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL); 247 if (!priv) 248 return -ENOMEM; 249 250 r = platform_get_resource(pdev, IORESOURCE_MEM, 0); 251 if (!r) 252 return -EINVAL; 253 254 /* Just ioremap, as this MDIO block is usually integrated into an 255 * Ethernet MAC controller register range 256 */ 257 priv->base = devm_ioremap(&pdev->dev, r->start, resource_size(r)); 258 if (!priv->base) { 259 dev_err(&pdev->dev, "failed to remap register\n"); 260 return -ENOMEM; 261 } 262 263 if (of_property_read_u32(np, "clock-frequency", &priv->clk_freq)) 264 priv->clk_freq = 0; 265 266 priv->mii_bus = mdiobus_alloc(); 267 if (!priv->mii_bus) 268 return -ENOMEM; 269 270 bus = priv->mii_bus; 271 bus->priv = priv; 272 if (pdata) { 273 bus->name = pdata->bus_name; 274 priv->wait_func = pdata->wait_func; 275 priv->wait_func_data = pdata->wait_func_data; 276 bus->phy_mask = ~pdata->phy_mask; 277 priv->clk = pdata->clk; 278 } else { 279 bus->name = "unimac MII bus"; 280 priv->wait_func_data = priv; 281 priv->wait_func = unimac_mdio_poll; 282 priv->clk = devm_clk_get_optional(&pdev->dev, NULL); 283 } 284 285 if (IS_ERR(priv->clk)) { 286 ret = PTR_ERR(priv->clk); 287 goto out_mdio_free; 288 } 289 290 bus->parent = &pdev->dev; 291 bus->read = unimac_mdio_read; 292 bus->write = unimac_mdio_write; 293 bus->reset = unimac_mdio_reset; 294 snprintf(bus->id, MII_BUS_ID_SIZE, "%s-%d", pdev->name, pdev->id); 295 296 ret = unimac_mdio_clk_set(priv); 297 if (ret) 298 goto out_mdio_free; 299 300 ret = of_mdiobus_register(bus, np); 301 if (ret) { 302 dev_err(&pdev->dev, "MDIO bus registration failed\n"); 303 goto out_mdio_free; 304 } 305 306 platform_set_drvdata(pdev, priv); 307 308 dev_info(&pdev->dev, "Broadcom UniMAC MDIO bus\n"); 309 310 return 0; 311 312 out_mdio_free: 313 mdiobus_free(bus); 314 return ret; 315 } 316 317 static void unimac_mdio_remove(struct platform_device *pdev) 318 { 319 struct unimac_mdio_priv *priv = platform_get_drvdata(pdev); 320 321 mdiobus_unregister(priv->mii_bus); 322 mdiobus_free(priv->mii_bus); 323 } 324 325 static int __maybe_unused unimac_mdio_resume(struct device *d) 326 { 327 struct unimac_mdio_priv *priv = dev_get_drvdata(d); 328 329 return unimac_mdio_clk_set(priv); 330 } 331 332 static SIMPLE_DEV_PM_OPS(unimac_mdio_pm_ops, 333 NULL, unimac_mdio_resume); 334 335 static const struct of_device_id unimac_mdio_ids[] = { 336 { .compatible = "brcm,asp-v3.0-mdio", }, 337 { .compatible = "brcm,asp-v2.2-mdio", }, 338 { .compatible = "brcm,asp-v2.1-mdio", }, 339 { .compatible = "brcm,bcm6846-mdio", }, 340 { .compatible = "brcm,genet-mdio-v5", }, 341 { .compatible = "brcm,genet-mdio-v4", }, 342 { .compatible = "brcm,genet-mdio-v3", }, 343 { .compatible = "brcm,genet-mdio-v2", }, 344 { .compatible = "brcm,genet-mdio-v1", }, 345 { .compatible = "brcm,unimac-mdio", }, 346 { /* sentinel */ }, 347 }; 348 MODULE_DEVICE_TABLE(of, unimac_mdio_ids); 349 350 static struct platform_driver unimac_mdio_driver = { 351 .driver = { 352 .name = UNIMAC_MDIO_DRV_NAME, 353 .of_match_table = unimac_mdio_ids, 354 .pm = &unimac_mdio_pm_ops, 355 }, 356 .probe = unimac_mdio_probe, 357 .remove = unimac_mdio_remove, 358 }; 359 module_platform_driver(unimac_mdio_driver); 360 361 MODULE_AUTHOR("Broadcom Corporation"); 362 MODULE_DESCRIPTION("Broadcom UniMAC MDIO bus controller"); 363 MODULE_LICENSE("GPL"); 364 MODULE_ALIAS("platform:" UNIMAC_MDIO_DRV_NAME); 365