1 /* SPDX-License-Identifier: GPL-2.0 */ 2 3 /* Copyright (c) 2012-2018, The Linux Foundation. All rights reserved. 4 * Copyright (C) 2019-2023 Linaro Ltd. 5 */ 6 #ifndef _IPA_ENDPOINT_H_ 7 #define _IPA_ENDPOINT_H_ 8 9 #include <linux/types.h> 10 #include <linux/workqueue.h> 11 #include <linux/if_ether.h> 12 13 #include "gsi.h" 14 #include "ipa_reg.h" 15 16 struct net_device; 17 struct sk_buff; 18 19 struct ipa; 20 struct ipa_gsi_endpoint_data; 21 22 /* Non-zero granularity of counter used to implement aggregation timeout */ 23 #define IPA_AGGR_GRANULARITY 500 /* microseconds */ 24 25 #define IPA_MTU ETH_DATA_LEN 26 27 enum ipa_endpoint_name { 28 IPA_ENDPOINT_AP_COMMAND_TX, 29 IPA_ENDPOINT_AP_LAN_RX, 30 IPA_ENDPOINT_AP_MODEM_TX, 31 IPA_ENDPOINT_AP_MODEM_RX, 32 IPA_ENDPOINT_MODEM_COMMAND_TX, 33 IPA_ENDPOINT_MODEM_LAN_TX, 34 IPA_ENDPOINT_MODEM_LAN_RX, 35 IPA_ENDPOINT_MODEM_AP_TX, 36 IPA_ENDPOINT_MODEM_AP_RX, 37 IPA_ENDPOINT_MODEM_DL_NLO_TX, 38 IPA_ENDPOINT_COUNT, /* Number of names (not an index) */ 39 }; 40 41 #define IPA_ENDPOINT_MAX 36 /* Max supported by driver */ 42 43 /** 44 * struct ipa_endpoint_tx - Endpoint configuration for TX endpoints 45 * @seq_type: primary packet processing sequencer type 46 * @seq_rep_type: sequencer type for replication processing 47 * @status_endpoint: endpoint to which status elements are sent 48 * 49 * The @status_endpoint is only valid if the endpoint's @status_enable 50 * flag is set. 51 */ 52 struct ipa_endpoint_tx { 53 enum ipa_seq_type seq_type; 54 enum ipa_seq_rep_type seq_rep_type; 55 enum ipa_endpoint_name status_endpoint; 56 }; 57 58 /** 59 * struct ipa_endpoint_rx - Endpoint configuration for RX endpoints 60 * @buffer_size: requested receive buffer size (bytes) 61 * @pad_align: power-of-2 boundary to which packet payload is aligned 62 * @aggr_time_limit: time before aggregation closes (microseconds) 63 * @aggr_hard_limit: whether aggregation closes before or after boundary 64 * @aggr_close_eof: whether aggregation closes on end-of-frame 65 * @holb_drop: whether to drop packets to avoid head-of-line blocking 66 * 67 * The actual size of the receive buffer is rounded up if necessary 68 * to be a power-of-2 number of pages. 69 * 70 * With each packet it transfers, the IPA hardware can perform certain 71 * transformations of its packet data. One of these is adding pad bytes 72 * to the end of the packet data so the result ends on a power-of-2 boundary. 73 * 74 * It is also able to aggregate multiple packets into a single receive buffer. 75 * Aggregation is "open" while a buffer is being filled, and "closes" when 76 * certain criteria are met. 77 * 78 * A time limit can be specified to close aggregation. Aggregation will be 79 * closed if this period passes after data is first written into a receive 80 * buffer. If not specified, no time limit is imposed. 81 * 82 * Insufficient space available in the receive buffer can close aggregation. 83 * The aggregation byte limit defines the point (in units of 1024 bytes) in 84 * the buffer where aggregation closes. With a "soft" aggregation limit, 85 * aggregation closes when a packet written to the buffer *crosses* that 86 * aggregation limit. With a "hard" aggregation limit, aggregation will 87 * close *before* writing a packet that would cross that boundary. 88 */ 89 struct ipa_endpoint_rx { 90 u32 buffer_size; 91 u32 pad_align; 92 u32 aggr_time_limit; 93 bool aggr_hard_limit; 94 bool aggr_close_eof; 95 bool holb_drop; 96 }; 97 98 /** 99 * struct ipa_endpoint_config - IPA endpoint hardware configuration 100 * @resource_group: resource group to assign endpoint to 101 * @checksum: whether checksum offload is enabled 102 * @qmap: whether endpoint uses QMAP protocol 103 * @aggregation: whether endpoint supports aggregation 104 * @status_enable: whether endpoint uses status elements 105 * @dma_mode: whether endpoint operates in DMA mode 106 * @dma_endpoint: peer endpoint, if operating in DMA mode 107 * @tx: TX-specific endpoint information (see above) 108 * @rx: RX-specific endpoint information (see above) 109 */ 110 struct ipa_endpoint_config { 111 u32 resource_group; 112 bool checksum; 113 bool qmap; 114 bool aggregation; 115 bool status_enable; 116 bool dma_mode; 117 enum ipa_endpoint_name dma_endpoint; 118 union { 119 struct ipa_endpoint_tx tx; 120 struct ipa_endpoint_rx rx; 121 }; 122 }; 123 124 /** 125 * enum ipa_replenish_flag: RX buffer replenish flags 126 * 127 * @IPA_REPLENISH_ENABLED: Whether receive buffer replenishing is enabled 128 * @IPA_REPLENISH_ACTIVE: Whether replenishing is underway 129 * @IPA_REPLENISH_COUNT: Number of defined replenish flags 130 */ 131 enum ipa_replenish_flag { 132 IPA_REPLENISH_ENABLED, 133 IPA_REPLENISH_ACTIVE, 134 IPA_REPLENISH_COUNT, /* Number of flags (must be last) */ 135 }; 136 137 /** 138 * struct ipa_endpoint - IPA endpoint information 139 * @ipa: IPA pointer 140 * @ee_id: Execution environmnent endpoint is associated with 141 * @channel_id: GSI channel used by the endpoint 142 * @endpoint_id: IPA endpoint number 143 * @toward_ipa: Endpoint direction (true = TX, false = RX) 144 * @config: Default endpoint configuration 145 * @skb_frag_max: Maximum allowed number of TX SKB fragments 146 * @evt_ring_id: GSI event ring used by the endpoint 147 * @netdev: Network device pointer, if endpoint uses one 148 * @replenish_flags: Replenishing state flags 149 * @replenish_count: Total number of replenish transactions committed 150 * @replenish_work: Work item used for repeated replenish failures 151 */ 152 struct ipa_endpoint { 153 struct ipa *ipa; 154 enum gsi_ee_id ee_id; 155 u32 channel_id; 156 u32 endpoint_id; 157 bool toward_ipa; 158 struct ipa_endpoint_config config; 159 160 u32 skb_frag_max; /* Used for netdev TX only */ 161 u32 evt_ring_id; 162 163 /* Net device this endpoint is associated with, if any */ 164 struct net_device *netdev; 165 166 /* Receive buffer replenishing for RX endpoints */ 167 DECLARE_BITMAP(replenish_flags, IPA_REPLENISH_COUNT); 168 u64 replenish_count; 169 struct delayed_work replenish_work; /* global wq */ 170 }; 171 172 void ipa_endpoint_modem_hol_block_clear_all(struct ipa *ipa); 173 174 void ipa_endpoint_modem_pause_all(struct ipa *ipa, bool enable); 175 176 int ipa_endpoint_modem_exception_reset_all(struct ipa *ipa); 177 178 int ipa_endpoint_skb_tx(struct ipa_endpoint *endpoint, struct sk_buff *skb); 179 180 int ipa_endpoint_enable_one(struct ipa_endpoint *endpoint); 181 void ipa_endpoint_disable_one(struct ipa_endpoint *endpoint); 182 183 void ipa_endpoint_suspend_one(struct ipa_endpoint *endpoint); 184 void ipa_endpoint_resume_one(struct ipa_endpoint *endpoint); 185 186 void ipa_endpoint_suspend(struct ipa *ipa); 187 void ipa_endpoint_resume(struct ipa *ipa); 188 189 void ipa_endpoint_setup(struct ipa *ipa); 190 void ipa_endpoint_teardown(struct ipa *ipa); 191 192 int ipa_endpoint_config(struct ipa *ipa); 193 void ipa_endpoint_deconfig(struct ipa *ipa); 194 195 void ipa_endpoint_default_route_set(struct ipa *ipa, u32 endpoint_id); 196 void ipa_endpoint_default_route_clear(struct ipa *ipa); 197 198 int ipa_endpoint_init(struct ipa *ipa, u32 count, 199 const struct ipa_gsi_endpoint_data *data); 200 void ipa_endpoint_exit(struct ipa *ipa); 201 202 void ipa_endpoint_trans_complete(struct ipa_endpoint *ipa, 203 struct gsi_trans *trans); 204 void ipa_endpoint_trans_release(struct ipa_endpoint *ipa, 205 struct gsi_trans *trans); 206 207 #endif /* _IPA_ENDPOINT_H_ */ 208