xref: /linux/drivers/net/ipa/ipa.h (revision 7255fcc80d4b525cc10cfaaf7f485830d4ed2000)
1 /* SPDX-License-Identifier: GPL-2.0 */
2 
3 /* Copyright (c) 2012-2018, The Linux Foundation. All rights reserved.
4  * Copyright (C) 2018-2022 Linaro Ltd.
5  */
6 #ifndef _IPA_H_
7 #define _IPA_H_
8 
9 #include <linux/types.h>
10 #include <linux/device.h>
11 #include <linux/notifier.h>
12 #include <linux/pm_wakeup.h>
13 
14 #include "ipa_version.h"
15 #include "gsi.h"
16 #include "ipa_mem.h"
17 #include "ipa_qmi.h"
18 #include "ipa_endpoint.h"
19 #include "ipa_interrupt.h"
20 
21 struct clk;
22 struct icc_path;
23 struct net_device;
24 
25 struct ipa_power;
26 struct ipa_smp2p;
27 struct ipa_interrupt;
28 
29 /**
30  * struct ipa - IPA information
31  * @gsi:		Embedded GSI structure
32  * @version:		IPA hardware version
33  * @dev:		IPA device pointer
34  * @completion:		Used to signal pipeline clear transfer complete
35  * @nb:			Notifier block used for remoteproc SSR
36  * @notifier:		Remoteproc SSR notifier
37  * @smp2p:		SMP2P information
38  * @power:		IPA power information
39  * @table_addr:		DMA address of filter/route table content
40  * @table_virt:		Virtual address of filter/route table content
41  * @route_count:	Total number of entries in a routing table
42  * @modem_route_count:	Number of modem entries in a routing table
43  * @filter_count:	Maximum number of entries in a filter table
44  * @interrupt:		IPA Interrupt information
45  * @uc_powered:		true if power is active by proxy for microcontroller
46  * @uc_loaded:		true after microcontroller has reported it's ready
47  * @reg_virt:		Virtual address used for IPA register access
48  * @regs:		IPA register definitions
49  * @mem_addr:		DMA address of IPA-local memory space
50  * @mem_virt:		Virtual address of IPA-local memory space
51  * @mem_offset:		Offset from @mem_virt used for access to IPA memory
52  * @mem_size:		Total size (bytes) of memory at @mem_virt
53  * @mem_count:		Number of entries in the mem array
54  * @mem:		Array of IPA-local memory region descriptors
55  * @imem_iova:		I/O virtual address of IPA region in IMEM
56  * @imem_size:		Size of IMEM region
57  * @smem_iova:		I/O virtual address of IPA region in SMEM
58  * @smem_size:		Size of SMEM region
59  * @zero_addr:		DMA address of preallocated zero-filled memory
60  * @zero_virt:		Virtual address of preallocated zero-filled memory
61  * @zero_size:		Size (bytes) of preallocated zero-filled memory
62  * @endpoint_count:	Number of defined bits in most bitmaps below
63  * @available_count:	Number of defined bits in the available bitmap
64  * @defined:		Bitmap of endpoints defined in config data
65  * @available:		Bitmap of endpoints supported by hardware
66  * @filtered:		Bitmap of endpoints that support filtering
67  * @set_up:		Bitmap of endpoints that are set up for use
68  * @enabled:		Bitmap of currently enabled endpoints
69  * @modem_tx_count:	Number of defined modem TX endoints
70  * @endpoint:		Array of endpoint information
71  * @channel_map:	Mapping of GSI channel to IPA endpoint
72  * @name_map:		Mapping of IPA endpoint name to IPA endpoint
73  * @setup_complete:	Flag indicating whether setup stage has completed
74  * @modem_state:	State of modem (stopped, running)
75  * @modem_netdev:	Network device structure used for modem
76  * @qmi:		QMI information
77  */
78 struct ipa {
79 	struct gsi gsi;
80 	enum ipa_version version;
81 	struct device *dev;
82 	struct completion completion;
83 	struct notifier_block nb;
84 	void *notifier;
85 	struct ipa_smp2p *smp2p;
86 	struct ipa_power *power;
87 
88 	dma_addr_t table_addr;
89 	__le64 *table_virt;
90 	u32 route_count;
91 	u32 modem_route_count;
92 	u32 filter_count;
93 
94 	struct ipa_interrupt *interrupt;
95 	bool uc_powered;
96 	bool uc_loaded;
97 
98 	void __iomem *reg_virt;
99 	const struct regs *regs;
100 
101 	dma_addr_t mem_addr;
102 	void *mem_virt;
103 	u32 mem_offset;
104 	u32 mem_size;
105 	u32 mem_count;
106 	const struct ipa_mem *mem;
107 
108 	unsigned long imem_iova;
109 	size_t imem_size;
110 
111 	unsigned long smem_iova;
112 	size_t smem_size;
113 
114 	dma_addr_t zero_addr;
115 	void *zero_virt;
116 	size_t zero_size;
117 
118 	/* Bitmaps indicating endpoint state */
119 	u32 endpoint_count;
120 	u32 available_count;
121 	unsigned long *defined;		/* Defined in configuration data */
122 	unsigned long *available;	/* Supported by hardware */
123 	u64 filtered;			/* Support filtering (AP and modem) */
124 	unsigned long *set_up;
125 	unsigned long *enabled;
126 
127 	u32 modem_tx_count;
128 	struct ipa_endpoint endpoint[IPA_ENDPOINT_MAX];
129 	struct ipa_endpoint *channel_map[GSI_CHANNEL_COUNT_MAX];
130 	struct ipa_endpoint *name_map[IPA_ENDPOINT_COUNT];
131 
132 	bool setup_complete;
133 
134 	atomic_t modem_state;		/* enum ipa_modem_state */
135 	struct net_device *modem_netdev;
136 	struct ipa_qmi qmi;
137 };
138 
139 /**
140  * ipa_setup() - Perform IPA setup
141  * @ipa:		IPA pointer
142  *
143  * IPA initialization is broken into stages:  init; config; and setup.
144  * (These have inverses exit, deconfig, and teardown.)
145  *
146  * Activities performed at the init stage can be done without requiring
147  * any access to IPA hardware.  Activities performed at the config stage
148  * require IPA power, because they involve access to IPA registers.
149  * The setup stage is performed only after the GSI hardware is ready
150  * (more on this below).  The setup stage allows the AP to perform
151  * more complex initialization by issuing "immediate commands" using
152  * a special interface to the IPA.
153  *
154  * This function, @ipa_setup(), starts the setup stage.
155  *
156  * In order for the GSI hardware to be functional it needs firmware to be
157  * loaded (in addition to some other low-level initialization).  This early
158  * GSI initialization can be done either by Trust Zone on the AP or by the
159  * modem.
160  *
161  * If it's done by Trust Zone, the AP loads the GSI firmware and supplies
162  * it to Trust Zone to verify and install.  When this completes, if
163  * verification was successful, the GSI layer is ready and ipa_setup()
164  * implements the setup phase of initialization.
165  *
166  * If the modem performs early GSI initialization, the AP needs to know
167  * when this has occurred.  An SMP2P interrupt is used for this purpose,
168  * and receipt of that interrupt triggers the call to ipa_setup().
169  */
170 int ipa_setup(struct ipa *ipa);
171 
172 #endif /* _IPA_H_ */
173