1 /* SPDX-License-Identifier: GPL-2.0 */ 2 3 /* Copyright (c) 2012-2018, The Linux Foundation. All rights reserved. 4 * Copyright (C) 2018-2020 Linaro Ltd. 5 */ 6 #ifndef _IPA_H_ 7 #define _IPA_H_ 8 9 #include <linux/types.h> 10 #include <linux/device.h> 11 #include <linux/notifier.h> 12 #include <linux/pm_wakeup.h> 13 14 #include "ipa_version.h" 15 #include "gsi.h" 16 #include "ipa_mem.h" 17 #include "ipa_qmi.h" 18 #include "ipa_endpoint.h" 19 #include "ipa_interrupt.h" 20 21 struct clk; 22 struct icc_path; 23 struct net_device; 24 struct platform_device; 25 26 struct ipa_clock; 27 struct ipa_smp2p; 28 struct ipa_interrupt; 29 30 /** 31 * enum ipa_flag - IPA state flags 32 * @IPA_FLAG_RESUMED: Whether resume from suspend has been signaled 33 * @IPA_FLAG_COUNT: Number of defined IPA flags 34 */ 35 enum ipa_flag { 36 IPA_FLAG_RESUMED, 37 IPA_FLAG_COUNT, /* Last; not a flag */ 38 }; 39 40 /** 41 * struct ipa - IPA information 42 * @gsi: Embedded GSI structure 43 * @flags: Boolean state flags 44 * @version: IPA hardware version 45 * @pdev: Platform device 46 * @completion: Used to signal pipeline clear transfer complete 47 * @nb: Notifier block used for remoteproc SSR 48 * @notifier: Remoteproc SSR notifier 49 * @smp2p: SMP2P information 50 * @clock: IPA clocking information 51 * @table_addr: DMA address of filter/route table content 52 * @table_virt: Virtual address of filter/route table content 53 * @interrupt: IPA Interrupt information 54 * @uc_loaded: true after microcontroller has reported it's ready 55 * @reg_addr: DMA address used for IPA register access 56 * @reg_virt: Virtual address used for IPA register access 57 * @mem_addr: DMA address of IPA-local memory space 58 * @mem_virt: Virtual address of IPA-local memory space 59 * @mem_offset: Offset from @mem_virt used for access to IPA memory 60 * @mem_size: Total size (bytes) of memory at @mem_virt 61 * @mem: Array of IPA-local memory region descriptors 62 * @imem_iova: I/O virtual address of IPA region in IMEM 63 * @imem_size: Size of IMEM region 64 * @smem_iova: I/O virtual address of IPA region in SMEM 65 * @smem_size: Size of SMEM region 66 * @zero_addr: DMA address of preallocated zero-filled memory 67 * @zero_virt: Virtual address of preallocated zero-filled memory 68 * @zero_size: Size (bytes) of preallocated zero-filled memory 69 * @available: Bit mask indicating endpoints hardware supports 70 * @filter_map: Bit mask indicating endpoints that support filtering 71 * @initialized: Bit mask indicating endpoints initialized 72 * @set_up: Bit mask indicating endpoints set up 73 * @enabled: Bit mask indicating endpoints enabled 74 * @endpoint: Array of endpoint information 75 * @channel_map: Mapping of GSI channel to IPA endpoint 76 * @name_map: Mapping of IPA endpoint name to IPA endpoint 77 * @setup_complete: Flag indicating whether setup stage has completed 78 * @modem_state: State of modem (stopped, running) 79 * @modem_netdev: Network device structure used for modem 80 * @qmi: QMI information 81 */ 82 struct ipa { 83 struct gsi gsi; 84 DECLARE_BITMAP(flags, IPA_FLAG_COUNT); 85 enum ipa_version version; 86 struct platform_device *pdev; 87 struct completion completion; 88 struct notifier_block nb; 89 void *notifier; 90 struct ipa_smp2p *smp2p; 91 struct ipa_clock *clock; 92 93 dma_addr_t table_addr; 94 __le64 *table_virt; 95 96 struct ipa_interrupt *interrupt; 97 bool uc_loaded; 98 99 dma_addr_t reg_addr; 100 void __iomem *reg_virt; 101 102 dma_addr_t mem_addr; 103 void *mem_virt; 104 u32 mem_offset; 105 u32 mem_size; 106 const struct ipa_mem *mem; 107 108 unsigned long imem_iova; 109 size_t imem_size; 110 111 unsigned long smem_iova; 112 size_t smem_size; 113 114 dma_addr_t zero_addr; 115 void *zero_virt; 116 size_t zero_size; 117 118 /* Bit masks indicating endpoint state */ 119 u32 available; /* supported by hardware */ 120 u32 filter_map; 121 u32 initialized; 122 u32 set_up; 123 u32 enabled; 124 125 struct ipa_endpoint endpoint[IPA_ENDPOINT_MAX]; 126 struct ipa_endpoint *channel_map[GSI_CHANNEL_COUNT_MAX]; 127 struct ipa_endpoint *name_map[IPA_ENDPOINT_COUNT]; 128 129 bool setup_complete; 130 131 atomic_t modem_state; /* enum ipa_modem_state */ 132 struct net_device *modem_netdev; 133 struct ipa_qmi qmi; 134 }; 135 136 /** 137 * ipa_setup() - Perform IPA setup 138 * @ipa: IPA pointer 139 * 140 * IPA initialization is broken into stages: init; config; and setup. 141 * (These have inverses exit, deconfig, and teardown.) 142 * 143 * Activities performed at the init stage can be done without requiring 144 * any access to IPA hardware. Activities performed at the config stage 145 * require the IPA clock to be running, because they involve access 146 * to IPA registers. The setup stage is performed only after the GSI 147 * hardware is ready (more on this below). The setup stage allows 148 * the AP to perform more complex initialization by issuing "immediate 149 * commands" using a special interface to the IPA. 150 * 151 * This function, @ipa_setup(), starts the setup stage. 152 * 153 * In order for the GSI hardware to be functional it needs firmware to be 154 * loaded (in addition to some other low-level initialization). This early 155 * GSI initialization can be done either by Trust Zone on the AP or by the 156 * modem. 157 * 158 * If it's done by Trust Zone, the AP loads the GSI firmware and supplies 159 * it to Trust Zone to verify and install. When this completes, if 160 * verification was successful, the GSI layer is ready and ipa_setup() 161 * implements the setup phase of initialization. 162 * 163 * If the modem performs early GSI initialization, the AP needs to know 164 * when this has occurred. An SMP2P interrupt is used for this purpose, 165 * and receipt of that interrupt triggers the call to ipa_setup(). 166 */ 167 int ipa_setup(struct ipa *ipa); 168 169 #endif /* _IPA_H_ */ 170