1 /* 2 * Driver for Microchip MRF24J40 802.15.4 Wireless-PAN Networking controller 3 * 4 * Copyright (C) 2012 Alan Ott <alan@signal11.us> 5 * Signal 11 Software 6 * 7 * This program is free software; you can redistribute it and/or modify 8 * it under the terms of the GNU General Public License as published by 9 * the Free Software Foundation; either version 2 of the License, or 10 * (at your option) any later version. 11 * 12 * This program is distributed in the hope that it will be useful, 13 * but WITHOUT ANY WARRANTY; without even the implied warranty of 14 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 15 * GNU General Public License for more details. 16 */ 17 18 #include <linux/spi/spi.h> 19 #include <linux/interrupt.h> 20 #include <linux/module.h> 21 #include <linux/regmap.h> 22 #include <linux/ieee802154.h> 23 #include <linux/irq.h> 24 #include <net/cfg802154.h> 25 #include <net/mac802154.h> 26 27 /* MRF24J40 Short Address Registers */ 28 #define REG_RXMCR 0x00 /* Receive MAC control */ 29 #define BIT_PROMI BIT(0) 30 #define BIT_ERRPKT BIT(1) 31 #define BIT_NOACKRSP BIT(5) 32 #define BIT_PANCOORD BIT(3) 33 34 #define REG_PANIDL 0x01 /* PAN ID (low) */ 35 #define REG_PANIDH 0x02 /* PAN ID (high) */ 36 #define REG_SADRL 0x03 /* Short address (low) */ 37 #define REG_SADRH 0x04 /* Short address (high) */ 38 #define REG_EADR0 0x05 /* Long address (low) (high is EADR7) */ 39 #define REG_EADR1 0x06 40 #define REG_EADR2 0x07 41 #define REG_EADR3 0x08 42 #define REG_EADR4 0x09 43 #define REG_EADR5 0x0A 44 #define REG_EADR6 0x0B 45 #define REG_EADR7 0x0C 46 #define REG_RXFLUSH 0x0D 47 #define REG_ORDER 0x10 48 #define REG_TXMCR 0x11 /* Transmit MAC control */ 49 #define TXMCR_MIN_BE_SHIFT 3 50 #define TXMCR_MIN_BE_MASK 0x18 51 #define TXMCR_CSMA_RETRIES_SHIFT 0 52 #define TXMCR_CSMA_RETRIES_MASK 0x07 53 54 #define REG_ACKTMOUT 0x12 55 #define REG_ESLOTG1 0x13 56 #define REG_SYMTICKL 0x14 57 #define REG_SYMTICKH 0x15 58 #define REG_PACON0 0x16 /* Power Amplifier Control */ 59 #define REG_PACON1 0x17 /* Power Amplifier Control */ 60 #define REG_PACON2 0x18 /* Power Amplifier Control */ 61 #define REG_TXBCON0 0x1A 62 #define REG_TXNCON 0x1B /* Transmit Normal FIFO Control */ 63 #define BIT_TXNTRIG BIT(0) 64 #define BIT_TXNACKREQ BIT(2) 65 66 #define REG_TXG1CON 0x1C 67 #define REG_TXG2CON 0x1D 68 #define REG_ESLOTG23 0x1E 69 #define REG_ESLOTG45 0x1F 70 #define REG_ESLOTG67 0x20 71 #define REG_TXPEND 0x21 72 #define REG_WAKECON 0x22 73 #define REG_FROMOFFSET 0x23 74 #define REG_TXSTAT 0x24 /* TX MAC Status Register */ 75 #define REG_TXBCON1 0x25 76 #define REG_GATECLK 0x26 77 #define REG_TXTIME 0x27 78 #define REG_HSYMTMRL 0x28 79 #define REG_HSYMTMRH 0x29 80 #define REG_SOFTRST 0x2A /* Soft Reset */ 81 #define REG_SECCON0 0x2C 82 #define REG_SECCON1 0x2D 83 #define REG_TXSTBL 0x2E /* TX Stabilization */ 84 #define REG_RXSR 0x30 85 #define REG_INTSTAT 0x31 /* Interrupt Status */ 86 #define BIT_TXNIF BIT(0) 87 #define BIT_RXIF BIT(3) 88 89 #define REG_INTCON 0x32 /* Interrupt Control */ 90 #define BIT_TXNIE BIT(0) 91 #define BIT_RXIE BIT(3) 92 93 #define REG_GPIO 0x33 /* GPIO */ 94 #define REG_TRISGPIO 0x34 /* GPIO direction */ 95 #define REG_SLPACK 0x35 96 #define REG_RFCTL 0x36 /* RF Control Mode Register */ 97 #define BIT_RFRST BIT(2) 98 99 #define REG_SECCR2 0x37 100 #define REG_BBREG0 0x38 101 #define REG_BBREG1 0x39 /* Baseband Registers */ 102 #define BIT_RXDECINV BIT(2) 103 104 #define REG_BBREG2 0x3A /* */ 105 #define BBREG2_CCA_MODE_SHIFT 6 106 #define BBREG2_CCA_MODE_MASK 0xc0 107 108 #define REG_BBREG3 0x3B 109 #define REG_BBREG4 0x3C 110 #define REG_BBREG6 0x3E /* */ 111 #define REG_CCAEDTH 0x3F /* Energy Detection Threshold */ 112 113 /* MRF24J40 Long Address Registers */ 114 #define REG_RFCON0 0x200 /* RF Control Registers */ 115 #define RFCON0_CH_SHIFT 4 116 #define RFCON0_CH_MASK 0xf0 117 #define RFOPT_RECOMMEND 3 118 119 #define REG_RFCON1 0x201 120 #define REG_RFCON2 0x202 121 #define REG_RFCON3 0x203 122 123 #define TXPWRL_MASK 0xc0 124 #define TXPWRL_SHIFT 6 125 #define TXPWRL_30 0x3 126 #define TXPWRL_20 0x2 127 #define TXPWRL_10 0x1 128 #define TXPWRL_0 0x0 129 130 #define TXPWRS_MASK 0x38 131 #define TXPWRS_SHIFT 3 132 #define TXPWRS_6_3 0x7 133 #define TXPWRS_4_9 0x6 134 #define TXPWRS_3_7 0x5 135 #define TXPWRS_2_8 0x4 136 #define TXPWRS_1_9 0x3 137 #define TXPWRS_1_2 0x2 138 #define TXPWRS_0_5 0x1 139 #define TXPWRS_0 0x0 140 141 #define REG_RFCON5 0x205 142 #define REG_RFCON6 0x206 143 #define REG_RFCON7 0x207 144 #define REG_RFCON8 0x208 145 #define REG_SLPCAL0 0x209 146 #define REG_SLPCAL1 0x20A 147 #define REG_SLPCAL2 0x20B 148 #define REG_RFSTATE 0x20F 149 #define REG_RSSI 0x210 150 #define REG_SLPCON0 0x211 /* Sleep Clock Control Registers */ 151 #define BIT_INTEDGE BIT(1) 152 153 #define REG_SLPCON1 0x220 154 #define REG_WAKETIMEL 0x222 /* Wake-up Time Match Value Low */ 155 #define REG_WAKETIMEH 0x223 /* Wake-up Time Match Value High */ 156 #define REG_REMCNTL 0x224 157 #define REG_REMCNTH 0x225 158 #define REG_MAINCNT0 0x226 159 #define REG_MAINCNT1 0x227 160 #define REG_MAINCNT2 0x228 161 #define REG_MAINCNT3 0x229 162 #define REG_TESTMODE 0x22F /* Test mode */ 163 #define REG_ASSOEAR0 0x230 164 #define REG_ASSOEAR1 0x231 165 #define REG_ASSOEAR2 0x232 166 #define REG_ASSOEAR3 0x233 167 #define REG_ASSOEAR4 0x234 168 #define REG_ASSOEAR5 0x235 169 #define REG_ASSOEAR6 0x236 170 #define REG_ASSOEAR7 0x237 171 #define REG_ASSOSAR0 0x238 172 #define REG_ASSOSAR1 0x239 173 #define REG_UNONCE0 0x240 174 #define REG_UNONCE1 0x241 175 #define REG_UNONCE2 0x242 176 #define REG_UNONCE3 0x243 177 #define REG_UNONCE4 0x244 178 #define REG_UNONCE5 0x245 179 #define REG_UNONCE6 0x246 180 #define REG_UNONCE7 0x247 181 #define REG_UNONCE8 0x248 182 #define REG_UNONCE9 0x249 183 #define REG_UNONCE10 0x24A 184 #define REG_UNONCE11 0x24B 185 #define REG_UNONCE12 0x24C 186 #define REG_RX_FIFO 0x300 /* Receive FIFO */ 187 188 /* Device configuration: Only channels 11-26 on page 0 are supported. */ 189 #define MRF24J40_CHAN_MIN 11 190 #define MRF24J40_CHAN_MAX 26 191 #define CHANNEL_MASK (((u32)1 << (MRF24J40_CHAN_MAX + 1)) \ 192 - ((u32)1 << MRF24J40_CHAN_MIN)) 193 194 #define TX_FIFO_SIZE 128 /* From datasheet */ 195 #define RX_FIFO_SIZE 144 /* From datasheet */ 196 #define SET_CHANNEL_DELAY_US 192 /* From datasheet */ 197 198 enum mrf24j40_modules { MRF24J40, MRF24J40MA, MRF24J40MC }; 199 200 /* Device Private Data */ 201 struct mrf24j40 { 202 struct spi_device *spi; 203 struct ieee802154_hw *hw; 204 205 struct regmap *regmap_short; 206 struct regmap *regmap_long; 207 208 /* for writing txfifo */ 209 struct spi_message tx_msg; 210 u8 tx_hdr_buf[2]; 211 struct spi_transfer tx_hdr_trx; 212 u8 tx_len_buf[2]; 213 struct spi_transfer tx_len_trx; 214 struct spi_transfer tx_buf_trx; 215 struct sk_buff *tx_skb; 216 217 /* post transmit message to send frame out */ 218 struct spi_message tx_post_msg; 219 u8 tx_post_buf[2]; 220 struct spi_transfer tx_post_trx; 221 222 /* for protect/unprotect/read length rxfifo */ 223 struct spi_message rx_msg; 224 u8 rx_buf[3]; 225 struct spi_transfer rx_trx; 226 227 /* receive handling */ 228 struct spi_message rx_buf_msg; 229 u8 rx_addr_buf[2]; 230 struct spi_transfer rx_addr_trx; 231 u8 rx_lqi_buf[2]; 232 struct spi_transfer rx_lqi_trx; 233 u8 rx_fifo_buf[RX_FIFO_SIZE]; 234 struct spi_transfer rx_fifo_buf_trx; 235 236 /* isr handling for reading intstat */ 237 struct spi_message irq_msg; 238 u8 irq_buf[2]; 239 struct spi_transfer irq_trx; 240 }; 241 242 /* regmap information for short address register access */ 243 #define MRF24J40_SHORT_WRITE 0x01 244 #define MRF24J40_SHORT_READ 0x00 245 #define MRF24J40_SHORT_NUMREGS 0x3F 246 247 /* regmap information for long address register access */ 248 #define MRF24J40_LONG_ACCESS 0x80 249 #define MRF24J40_LONG_NUMREGS 0x38F 250 251 /* Read/Write SPI Commands for Short and Long Address registers. */ 252 #define MRF24J40_READSHORT(reg) ((reg) << 1) 253 #define MRF24J40_WRITESHORT(reg) ((reg) << 1 | 1) 254 #define MRF24J40_READLONG(reg) (1 << 15 | (reg) << 5) 255 #define MRF24J40_WRITELONG(reg) (1 << 15 | (reg) << 5 | 1 << 4) 256 257 /* The datasheet indicates the theoretical maximum for SCK to be 10MHz */ 258 #define MAX_SPI_SPEED_HZ 10000000 259 260 #define printdev(X) (&X->spi->dev) 261 262 static bool 263 mrf24j40_short_reg_writeable(struct device *dev, unsigned int reg) 264 { 265 switch (reg) { 266 case REG_RXMCR: 267 case REG_PANIDL: 268 case REG_PANIDH: 269 case REG_SADRL: 270 case REG_SADRH: 271 case REG_EADR0: 272 case REG_EADR1: 273 case REG_EADR2: 274 case REG_EADR3: 275 case REG_EADR4: 276 case REG_EADR5: 277 case REG_EADR6: 278 case REG_EADR7: 279 case REG_RXFLUSH: 280 case REG_ORDER: 281 case REG_TXMCR: 282 case REG_ACKTMOUT: 283 case REG_ESLOTG1: 284 case REG_SYMTICKL: 285 case REG_SYMTICKH: 286 case REG_PACON0: 287 case REG_PACON1: 288 case REG_PACON2: 289 case REG_TXBCON0: 290 case REG_TXNCON: 291 case REG_TXG1CON: 292 case REG_TXG2CON: 293 case REG_ESLOTG23: 294 case REG_ESLOTG45: 295 case REG_ESLOTG67: 296 case REG_TXPEND: 297 case REG_WAKECON: 298 case REG_FROMOFFSET: 299 case REG_TXBCON1: 300 case REG_GATECLK: 301 case REG_TXTIME: 302 case REG_HSYMTMRL: 303 case REG_HSYMTMRH: 304 case REG_SOFTRST: 305 case REG_SECCON0: 306 case REG_SECCON1: 307 case REG_TXSTBL: 308 case REG_RXSR: 309 case REG_INTCON: 310 case REG_TRISGPIO: 311 case REG_GPIO: 312 case REG_RFCTL: 313 case REG_SLPACK: 314 case REG_BBREG0: 315 case REG_BBREG1: 316 case REG_BBREG2: 317 case REG_BBREG3: 318 case REG_BBREG4: 319 case REG_BBREG6: 320 case REG_CCAEDTH: 321 return true; 322 default: 323 return false; 324 } 325 } 326 327 static bool 328 mrf24j40_short_reg_readable(struct device *dev, unsigned int reg) 329 { 330 bool rc; 331 332 /* all writeable are also readable */ 333 rc = mrf24j40_short_reg_writeable(dev, reg); 334 if (rc) 335 return rc; 336 337 /* readonly regs */ 338 switch (reg) { 339 case REG_TXSTAT: 340 case REG_INTSTAT: 341 return true; 342 default: 343 return false; 344 } 345 } 346 347 static bool 348 mrf24j40_short_reg_volatile(struct device *dev, unsigned int reg) 349 { 350 /* can be changed during runtime */ 351 switch (reg) { 352 case REG_TXSTAT: 353 case REG_INTSTAT: 354 case REG_RXFLUSH: 355 case REG_TXNCON: 356 case REG_SOFTRST: 357 case REG_RFCTL: 358 case REG_TXBCON0: 359 case REG_TXG1CON: 360 case REG_TXG2CON: 361 case REG_TXBCON1: 362 case REG_SECCON0: 363 case REG_RXSR: 364 case REG_SLPACK: 365 case REG_SECCR2: 366 case REG_BBREG6: 367 /* use them in spi_async and regmap so it's volatile */ 368 case REG_BBREG1: 369 return true; 370 default: 371 return false; 372 } 373 } 374 375 static bool 376 mrf24j40_short_reg_precious(struct device *dev, unsigned int reg) 377 { 378 /* don't clear irq line on read */ 379 switch (reg) { 380 case REG_INTSTAT: 381 return true; 382 default: 383 return false; 384 } 385 } 386 387 static const struct regmap_config mrf24j40_short_regmap = { 388 .name = "mrf24j40_short", 389 .reg_bits = 7, 390 .val_bits = 8, 391 .pad_bits = 1, 392 .write_flag_mask = MRF24J40_SHORT_WRITE, 393 .read_flag_mask = MRF24J40_SHORT_READ, 394 .cache_type = REGCACHE_RBTREE, 395 .max_register = MRF24J40_SHORT_NUMREGS, 396 .writeable_reg = mrf24j40_short_reg_writeable, 397 .readable_reg = mrf24j40_short_reg_readable, 398 .volatile_reg = mrf24j40_short_reg_volatile, 399 .precious_reg = mrf24j40_short_reg_precious, 400 }; 401 402 static bool 403 mrf24j40_long_reg_writeable(struct device *dev, unsigned int reg) 404 { 405 switch (reg) { 406 case REG_RFCON0: 407 case REG_RFCON1: 408 case REG_RFCON2: 409 case REG_RFCON3: 410 case REG_RFCON5: 411 case REG_RFCON6: 412 case REG_RFCON7: 413 case REG_RFCON8: 414 case REG_SLPCAL2: 415 case REG_SLPCON0: 416 case REG_SLPCON1: 417 case REG_WAKETIMEL: 418 case REG_WAKETIMEH: 419 case REG_REMCNTL: 420 case REG_REMCNTH: 421 case REG_MAINCNT0: 422 case REG_MAINCNT1: 423 case REG_MAINCNT2: 424 case REG_MAINCNT3: 425 case REG_TESTMODE: 426 case REG_ASSOEAR0: 427 case REG_ASSOEAR1: 428 case REG_ASSOEAR2: 429 case REG_ASSOEAR3: 430 case REG_ASSOEAR4: 431 case REG_ASSOEAR5: 432 case REG_ASSOEAR6: 433 case REG_ASSOEAR7: 434 case REG_ASSOSAR0: 435 case REG_ASSOSAR1: 436 case REG_UNONCE0: 437 case REG_UNONCE1: 438 case REG_UNONCE2: 439 case REG_UNONCE3: 440 case REG_UNONCE4: 441 case REG_UNONCE5: 442 case REG_UNONCE6: 443 case REG_UNONCE7: 444 case REG_UNONCE8: 445 case REG_UNONCE9: 446 case REG_UNONCE10: 447 case REG_UNONCE11: 448 case REG_UNONCE12: 449 return true; 450 default: 451 return false; 452 } 453 } 454 455 static bool 456 mrf24j40_long_reg_readable(struct device *dev, unsigned int reg) 457 { 458 bool rc; 459 460 /* all writeable are also readable */ 461 rc = mrf24j40_long_reg_writeable(dev, reg); 462 if (rc) 463 return rc; 464 465 /* readonly regs */ 466 switch (reg) { 467 case REG_SLPCAL0: 468 case REG_SLPCAL1: 469 case REG_RFSTATE: 470 case REG_RSSI: 471 return true; 472 default: 473 return false; 474 } 475 } 476 477 static bool 478 mrf24j40_long_reg_volatile(struct device *dev, unsigned int reg) 479 { 480 /* can be changed during runtime */ 481 switch (reg) { 482 case REG_SLPCAL0: 483 case REG_SLPCAL1: 484 case REG_SLPCAL2: 485 case REG_RFSTATE: 486 case REG_RSSI: 487 case REG_MAINCNT3: 488 return true; 489 default: 490 return false; 491 } 492 } 493 494 static const struct regmap_config mrf24j40_long_regmap = { 495 .name = "mrf24j40_long", 496 .reg_bits = 11, 497 .val_bits = 8, 498 .pad_bits = 5, 499 .write_flag_mask = MRF24J40_LONG_ACCESS, 500 .read_flag_mask = MRF24J40_LONG_ACCESS, 501 .cache_type = REGCACHE_RBTREE, 502 .max_register = MRF24J40_LONG_NUMREGS, 503 .writeable_reg = mrf24j40_long_reg_writeable, 504 .readable_reg = mrf24j40_long_reg_readable, 505 .volatile_reg = mrf24j40_long_reg_volatile, 506 }; 507 508 static int mrf24j40_long_regmap_write(void *context, const void *data, 509 size_t count) 510 { 511 struct spi_device *spi = context; 512 u8 buf[3]; 513 514 if (count > 3) 515 return -EINVAL; 516 517 /* regmap supports read/write mask only in frist byte 518 * long write access need to set the 12th bit, so we 519 * make special handling for write. 520 */ 521 memcpy(buf, data, count); 522 buf[1] |= (1 << 4); 523 524 return spi_write(spi, buf, count); 525 } 526 527 static int 528 mrf24j40_long_regmap_read(void *context, const void *reg, size_t reg_size, 529 void *val, size_t val_size) 530 { 531 struct spi_device *spi = context; 532 533 return spi_write_then_read(spi, reg, reg_size, val, val_size); 534 } 535 536 static const struct regmap_bus mrf24j40_long_regmap_bus = { 537 .write = mrf24j40_long_regmap_write, 538 .read = mrf24j40_long_regmap_read, 539 .reg_format_endian_default = REGMAP_ENDIAN_BIG, 540 .val_format_endian_default = REGMAP_ENDIAN_BIG, 541 }; 542 543 static void write_tx_buf_complete(void *context) 544 { 545 struct mrf24j40 *devrec = context; 546 __le16 fc = ieee802154_get_fc_from_skb(devrec->tx_skb); 547 u8 val = BIT_TXNTRIG; 548 int ret; 549 550 if (ieee802154_is_ackreq(fc)) 551 val |= BIT_TXNACKREQ; 552 553 devrec->tx_post_msg.complete = NULL; 554 devrec->tx_post_buf[0] = MRF24J40_WRITESHORT(REG_TXNCON); 555 devrec->tx_post_buf[1] = val; 556 557 ret = spi_async(devrec->spi, &devrec->tx_post_msg); 558 if (ret) 559 dev_err(printdev(devrec), "SPI write Failed for transmit buf\n"); 560 } 561 562 /* This function relies on an undocumented write method. Once a write command 563 and address is set, as many bytes of data as desired can be clocked into 564 the device. The datasheet only shows setting one byte at a time. */ 565 static int write_tx_buf(struct mrf24j40 *devrec, u16 reg, 566 const u8 *data, size_t length) 567 { 568 u16 cmd; 569 int ret; 570 571 /* Range check the length. 2 bytes are used for the length fields.*/ 572 if (length > TX_FIFO_SIZE-2) { 573 dev_err(printdev(devrec), "write_tx_buf() was passed too large a buffer. Performing short write.\n"); 574 length = TX_FIFO_SIZE-2; 575 } 576 577 cmd = MRF24J40_WRITELONG(reg); 578 devrec->tx_hdr_buf[0] = cmd >> 8 & 0xff; 579 devrec->tx_hdr_buf[1] = cmd & 0xff; 580 devrec->tx_len_buf[0] = 0x0; /* Header Length. Set to 0 for now. TODO */ 581 devrec->tx_len_buf[1] = length; /* Total length */ 582 devrec->tx_buf_trx.tx_buf = data; 583 devrec->tx_buf_trx.len = length; 584 585 ret = spi_async(devrec->spi, &devrec->tx_msg); 586 if (ret) 587 dev_err(printdev(devrec), "SPI write Failed for TX buf\n"); 588 589 return ret; 590 } 591 592 static int mrf24j40_tx(struct ieee802154_hw *hw, struct sk_buff *skb) 593 { 594 struct mrf24j40 *devrec = hw->priv; 595 596 dev_dbg(printdev(devrec), "tx packet of %d bytes\n", skb->len); 597 devrec->tx_skb = skb; 598 599 return write_tx_buf(devrec, 0x000, skb->data, skb->len); 600 } 601 602 static int mrf24j40_ed(struct ieee802154_hw *hw, u8 *level) 603 { 604 /* TODO: */ 605 pr_warn("mrf24j40: ed not implemented\n"); 606 *level = 0; 607 return 0; 608 } 609 610 static int mrf24j40_start(struct ieee802154_hw *hw) 611 { 612 struct mrf24j40 *devrec = hw->priv; 613 614 dev_dbg(printdev(devrec), "start\n"); 615 616 /* Clear TXNIE and RXIE. Enable interrupts */ 617 return regmap_update_bits(devrec->regmap_short, REG_INTCON, 618 BIT_TXNIE | BIT_RXIE, 0); 619 } 620 621 static void mrf24j40_stop(struct ieee802154_hw *hw) 622 { 623 struct mrf24j40 *devrec = hw->priv; 624 625 dev_dbg(printdev(devrec), "stop\n"); 626 627 /* Set TXNIE and RXIE. Disable Interrupts */ 628 regmap_update_bits(devrec->regmap_short, REG_INTCON, 629 BIT_TXNIE | BIT_TXNIE, BIT_TXNIE | BIT_TXNIE); 630 } 631 632 static int mrf24j40_set_channel(struct ieee802154_hw *hw, u8 page, u8 channel) 633 { 634 struct mrf24j40 *devrec = hw->priv; 635 u8 val; 636 int ret; 637 638 dev_dbg(printdev(devrec), "Set Channel %d\n", channel); 639 640 WARN_ON(page != 0); 641 WARN_ON(channel < MRF24J40_CHAN_MIN); 642 WARN_ON(channel > MRF24J40_CHAN_MAX); 643 644 /* Set Channel TODO */ 645 val = (channel - 11) << RFCON0_CH_SHIFT | RFOPT_RECOMMEND; 646 ret = regmap_update_bits(devrec->regmap_long, REG_RFCON0, 647 RFCON0_CH_MASK, val); 648 if (ret) 649 return ret; 650 651 /* RF Reset */ 652 ret = regmap_update_bits(devrec->regmap_short, REG_RFCTL, BIT_RFRST, 653 BIT_RFRST); 654 if (ret) 655 return ret; 656 657 ret = regmap_update_bits(devrec->regmap_short, REG_RFCTL, BIT_RFRST, 0); 658 if (!ret) 659 udelay(SET_CHANNEL_DELAY_US); /* per datasheet */ 660 661 return ret; 662 } 663 664 static int mrf24j40_filter(struct ieee802154_hw *hw, 665 struct ieee802154_hw_addr_filt *filt, 666 unsigned long changed) 667 { 668 struct mrf24j40 *devrec = hw->priv; 669 670 dev_dbg(printdev(devrec), "filter\n"); 671 672 if (changed & IEEE802154_AFILT_SADDR_CHANGED) { 673 /* Short Addr */ 674 u8 addrh, addrl; 675 676 addrh = le16_to_cpu(filt->short_addr) >> 8 & 0xff; 677 addrl = le16_to_cpu(filt->short_addr) & 0xff; 678 679 regmap_write(devrec->regmap_short, REG_SADRH, addrh); 680 regmap_write(devrec->regmap_short, REG_SADRL, addrl); 681 dev_dbg(printdev(devrec), 682 "Set short addr to %04hx\n", filt->short_addr); 683 } 684 685 if (changed & IEEE802154_AFILT_IEEEADDR_CHANGED) { 686 /* Device Address */ 687 u8 i, addr[8]; 688 689 memcpy(addr, &filt->ieee_addr, 8); 690 for (i = 0; i < 8; i++) 691 regmap_write(devrec->regmap_short, REG_EADR0 + i, 692 addr[i]); 693 694 #ifdef DEBUG 695 pr_debug("Set long addr to: "); 696 for (i = 0; i < 8; i++) 697 pr_debug("%02hhx ", addr[7 - i]); 698 pr_debug("\n"); 699 #endif 700 } 701 702 if (changed & IEEE802154_AFILT_PANID_CHANGED) { 703 /* PAN ID */ 704 u8 panidl, panidh; 705 706 panidh = le16_to_cpu(filt->pan_id) >> 8 & 0xff; 707 panidl = le16_to_cpu(filt->pan_id) & 0xff; 708 regmap_write(devrec->regmap_short, REG_PANIDH, panidh); 709 regmap_write(devrec->regmap_short, REG_PANIDL, panidl); 710 711 dev_dbg(printdev(devrec), "Set PANID to %04hx\n", filt->pan_id); 712 } 713 714 if (changed & IEEE802154_AFILT_PANC_CHANGED) { 715 /* Pan Coordinator */ 716 u8 val; 717 int ret; 718 719 if (filt->pan_coord) 720 val = BIT_PANCOORD; 721 else 722 val = 0; 723 ret = regmap_update_bits(devrec->regmap_short, REG_RXMCR, 724 BIT_PANCOORD, val); 725 if (ret) 726 return ret; 727 728 /* REG_SLOTTED is maintained as default (unslotted/CSMA-CA). 729 * REG_ORDER is maintained as default (no beacon/superframe). 730 */ 731 732 dev_dbg(printdev(devrec), "Set Pan Coord to %s\n", 733 filt->pan_coord ? "on" : "off"); 734 } 735 736 return 0; 737 } 738 739 static void mrf24j40_handle_rx_read_buf_unlock(struct mrf24j40 *devrec) 740 { 741 int ret; 742 743 /* Turn back on reception of packets off the air. */ 744 devrec->rx_msg.complete = NULL; 745 devrec->rx_buf[0] = MRF24J40_WRITESHORT(REG_BBREG1); 746 devrec->rx_buf[1] = 0x00; /* CLR RXDECINV */ 747 ret = spi_async(devrec->spi, &devrec->rx_msg); 748 if (ret) 749 dev_err(printdev(devrec), "failed to unlock rx buffer\n"); 750 } 751 752 static void mrf24j40_handle_rx_read_buf_complete(void *context) 753 { 754 struct mrf24j40 *devrec = context; 755 u8 len = devrec->rx_buf[2]; 756 u8 rx_local_buf[RX_FIFO_SIZE]; 757 struct sk_buff *skb; 758 759 memcpy(rx_local_buf, devrec->rx_fifo_buf, len); 760 mrf24j40_handle_rx_read_buf_unlock(devrec); 761 762 skb = dev_alloc_skb(IEEE802154_MTU); 763 if (!skb) { 764 dev_err(printdev(devrec), "failed to allocate skb\n"); 765 return; 766 } 767 768 memcpy(skb_put(skb, len), rx_local_buf, len); 769 ieee802154_rx_irqsafe(devrec->hw, skb, 0); 770 771 #ifdef DEBUG 772 print_hex_dump(KERN_DEBUG, "mrf24j40 rx: ", DUMP_PREFIX_OFFSET, 16, 1, 773 rx_local_buf, len, 0); 774 pr_debug("mrf24j40 rx: lqi: %02hhx rssi: %02hhx\n", 775 devrec->rx_lqi_buf[0], devrec->rx_lqi_buf[1]); 776 #endif 777 } 778 779 static void mrf24j40_handle_rx_read_buf(void *context) 780 { 781 struct mrf24j40 *devrec = context; 782 u16 cmd; 783 int ret; 784 785 /* if length is invalid read the full MTU */ 786 if (!ieee802154_is_valid_psdu_len(devrec->rx_buf[2])) 787 devrec->rx_buf[2] = IEEE802154_MTU; 788 789 cmd = MRF24J40_READLONG(REG_RX_FIFO + 1); 790 devrec->rx_addr_buf[0] = cmd >> 8 & 0xff; 791 devrec->rx_addr_buf[1] = cmd & 0xff; 792 devrec->rx_fifo_buf_trx.len = devrec->rx_buf[2]; 793 ret = spi_async(devrec->spi, &devrec->rx_buf_msg); 794 if (ret) { 795 dev_err(printdev(devrec), "failed to read rx buffer\n"); 796 mrf24j40_handle_rx_read_buf_unlock(devrec); 797 } 798 } 799 800 static void mrf24j40_handle_rx_read_len(void *context) 801 { 802 struct mrf24j40 *devrec = context; 803 u16 cmd; 804 int ret; 805 806 /* read the length of received frame */ 807 devrec->rx_msg.complete = mrf24j40_handle_rx_read_buf; 808 devrec->rx_trx.len = 3; 809 cmd = MRF24J40_READLONG(REG_RX_FIFO); 810 devrec->rx_buf[0] = cmd >> 8 & 0xff; 811 devrec->rx_buf[1] = cmd & 0xff; 812 813 ret = spi_async(devrec->spi, &devrec->rx_msg); 814 if (ret) { 815 dev_err(printdev(devrec), "failed to read rx buffer length\n"); 816 mrf24j40_handle_rx_read_buf_unlock(devrec); 817 } 818 } 819 820 static int mrf24j40_handle_rx(struct mrf24j40 *devrec) 821 { 822 /* Turn off reception of packets off the air. This prevents the 823 * device from overwriting the buffer while we're reading it. 824 */ 825 devrec->rx_msg.complete = mrf24j40_handle_rx_read_len; 826 devrec->rx_trx.len = 2; 827 devrec->rx_buf[0] = MRF24J40_WRITESHORT(REG_BBREG1); 828 devrec->rx_buf[1] = BIT_RXDECINV; /* SET RXDECINV */ 829 830 return spi_async(devrec->spi, &devrec->rx_msg); 831 } 832 833 static int 834 mrf24j40_csma_params(struct ieee802154_hw *hw, u8 min_be, u8 max_be, 835 u8 retries) 836 { 837 struct mrf24j40 *devrec = hw->priv; 838 u8 val; 839 840 /* min_be */ 841 val = min_be << TXMCR_MIN_BE_SHIFT; 842 /* csma backoffs */ 843 val |= retries << TXMCR_CSMA_RETRIES_SHIFT; 844 845 return regmap_update_bits(devrec->regmap_short, REG_TXMCR, 846 TXMCR_MIN_BE_MASK | TXMCR_CSMA_RETRIES_MASK, 847 val); 848 } 849 850 static int mrf24j40_set_cca_mode(struct ieee802154_hw *hw, 851 const struct wpan_phy_cca *cca) 852 { 853 struct mrf24j40 *devrec = hw->priv; 854 u8 val; 855 856 /* mapping 802.15.4 to driver spec */ 857 switch (cca->mode) { 858 case NL802154_CCA_ENERGY: 859 val = 2; 860 break; 861 case NL802154_CCA_CARRIER: 862 val = 1; 863 break; 864 case NL802154_CCA_ENERGY_CARRIER: 865 switch (cca->opt) { 866 case NL802154_CCA_OPT_ENERGY_CARRIER_AND: 867 val = 3; 868 break; 869 default: 870 return -EINVAL; 871 } 872 break; 873 default: 874 return -EINVAL; 875 } 876 877 return regmap_update_bits(devrec->regmap_short, REG_BBREG2, 878 BBREG2_CCA_MODE_MASK, 879 val << BBREG2_CCA_MODE_SHIFT); 880 } 881 882 /* array for representing ed levels */ 883 static const s32 mrf24j40_ed_levels[] = { 884 -9000, -8900, -8800, -8700, -8600, -8500, -8400, -8300, -8200, -8100, 885 -8000, -7900, -7800, -7700, -7600, -7500, -7400, -7300, -7200, -7100, 886 -7000, -6900, -6800, -6700, -6600, -6500, -6400, -6300, -6200, -6100, 887 -6000, -5900, -5800, -5700, -5600, -5500, -5400, -5300, -5200, -5100, 888 -5000, -4900, -4800, -4700, -4600, -4500, -4400, -4300, -4200, -4100, 889 -4000, -3900, -3800, -3700, -3600, -3500 890 }; 891 892 /* map ed levels to register value */ 893 static const s32 mrf24j40_ed_levels_map[][2] = { 894 { -9000, 0 }, { -8900, 1 }, { -8800, 2 }, { -8700, 5 }, { -8600, 9 }, 895 { -8500, 13 }, { -8400, 18 }, { -8300, 23 }, { -8200, 27 }, 896 { -8100, 32 }, { -8000, 37 }, { -7900, 43 }, { -7800, 48 }, 897 { -7700, 53 }, { -7600, 58 }, { -7500, 63 }, { -7400, 68 }, 898 { -7300, 73 }, { -7200, 78 }, { -7100, 83 }, { -7000, 89 }, 899 { -6900, 95 }, { -6800, 100 }, { -6700, 107 }, { -6600, 111 }, 900 { -6500, 117 }, { -6400, 121 }, { -6300, 125 }, { -6200, 129 }, 901 { -6100, 133 }, { -6000, 138 }, { -5900, 143 }, { -5800, 148 }, 902 { -5700, 153 }, { -5600, 159 }, { -5500, 165 }, { -5400, 170 }, 903 { -5300, 176 }, { -5200, 183 }, { -5100, 188 }, { -5000, 193 }, 904 { -4900, 198 }, { -4800, 203 }, { -4700, 207 }, { -4600, 212 }, 905 { -4500, 216 }, { -4400, 221 }, { -4300, 225 }, { -4200, 228 }, 906 { -4100, 233 }, { -4000, 239 }, { -3900, 245 }, { -3800, 250 }, 907 { -3700, 253 }, { -3600, 254 }, { -3500, 255 }, 908 }; 909 910 static int mrf24j40_set_cca_ed_level(struct ieee802154_hw *hw, s32 mbm) 911 { 912 struct mrf24j40 *devrec = hw->priv; 913 int i; 914 915 for (i = 0; i < ARRAY_SIZE(mrf24j40_ed_levels_map); i++) { 916 if (mrf24j40_ed_levels_map[i][0] == mbm) 917 return regmap_write(devrec->regmap_short, REG_CCAEDTH, 918 mrf24j40_ed_levels_map[i][1]); 919 } 920 921 return -EINVAL; 922 } 923 924 static const s32 mrf24j40ma_powers[] = { 925 0, -50, -120, -190, -280, -370, -490, -630, -1000, -1050, -1120, -1190, 926 -1280, -1370, -1490, -1630, -2000, -2050, -2120, -2190, -2280, -2370, 927 -2490, -2630, -3000, -3050, -3120, -3190, -3280, -3370, -3490, -3630, 928 }; 929 930 static int mrf24j40_set_txpower(struct ieee802154_hw *hw, s32 mbm) 931 { 932 struct mrf24j40 *devrec = hw->priv; 933 s32 small_scale; 934 u8 val; 935 936 if (0 >= mbm && mbm > -1000) { 937 val = TXPWRL_0 << TXPWRL_SHIFT; 938 small_scale = mbm; 939 } else if (-1000 >= mbm && mbm > -2000) { 940 val = TXPWRL_10 << TXPWRL_SHIFT; 941 small_scale = mbm + 1000; 942 } else if (-2000 >= mbm && mbm > -3000) { 943 val = TXPWRL_20 << TXPWRL_SHIFT; 944 small_scale = mbm + 2000; 945 } else if (-3000 >= mbm && mbm > -4000) { 946 val = TXPWRL_30 << TXPWRL_SHIFT; 947 small_scale = mbm + 3000; 948 } else { 949 return -EINVAL; 950 } 951 952 switch (small_scale) { 953 case 0: 954 val |= (TXPWRS_0 << TXPWRS_SHIFT); 955 break; 956 case -50: 957 val |= (TXPWRS_0_5 << TXPWRS_SHIFT); 958 break; 959 case -120: 960 val |= (TXPWRS_1_2 << TXPWRS_SHIFT); 961 break; 962 case -190: 963 val |= (TXPWRS_1_9 << TXPWRS_SHIFT); 964 break; 965 case -280: 966 val |= (TXPWRS_2_8 << TXPWRS_SHIFT); 967 break; 968 case -370: 969 val |= (TXPWRS_3_7 << TXPWRS_SHIFT); 970 break; 971 case -490: 972 val |= (TXPWRS_4_9 << TXPWRS_SHIFT); 973 break; 974 case -630: 975 val |= (TXPWRS_6_3 << TXPWRS_SHIFT); 976 break; 977 default: 978 return -EINVAL; 979 } 980 981 return regmap_update_bits(devrec->regmap_long, REG_RFCON3, 982 TXPWRL_MASK | TXPWRS_MASK, val); 983 } 984 985 static int mrf24j40_set_promiscuous_mode(struct ieee802154_hw *hw, bool on) 986 { 987 struct mrf24j40 *devrec = hw->priv; 988 int ret; 989 990 if (on) { 991 /* set PROMI, ERRPKT and NOACKRSP */ 992 ret = regmap_update_bits(devrec->regmap_short, REG_RXMCR, 993 BIT_PROMI | BIT_ERRPKT | BIT_NOACKRSP, 994 BIT_PROMI | BIT_ERRPKT | BIT_NOACKRSP); 995 } else { 996 /* clear PROMI, ERRPKT and NOACKRSP */ 997 ret = regmap_update_bits(devrec->regmap_short, REG_RXMCR, 998 BIT_PROMI | BIT_ERRPKT | BIT_NOACKRSP, 999 0); 1000 } 1001 1002 return ret; 1003 } 1004 1005 static const struct ieee802154_ops mrf24j40_ops = { 1006 .owner = THIS_MODULE, 1007 .xmit_async = mrf24j40_tx, 1008 .ed = mrf24j40_ed, 1009 .start = mrf24j40_start, 1010 .stop = mrf24j40_stop, 1011 .set_channel = mrf24j40_set_channel, 1012 .set_hw_addr_filt = mrf24j40_filter, 1013 .set_csma_params = mrf24j40_csma_params, 1014 .set_cca_mode = mrf24j40_set_cca_mode, 1015 .set_cca_ed_level = mrf24j40_set_cca_ed_level, 1016 .set_txpower = mrf24j40_set_txpower, 1017 .set_promiscuous_mode = mrf24j40_set_promiscuous_mode, 1018 }; 1019 1020 static void mrf24j40_intstat_complete(void *context) 1021 { 1022 struct mrf24j40 *devrec = context; 1023 u8 intstat = devrec->irq_buf[1]; 1024 1025 enable_irq(devrec->spi->irq); 1026 1027 /* Check for TX complete */ 1028 if (intstat & BIT_TXNIF) 1029 ieee802154_xmit_complete(devrec->hw, devrec->tx_skb, false); 1030 1031 /* Check for Rx */ 1032 if (intstat & BIT_RXIF) 1033 mrf24j40_handle_rx(devrec); 1034 } 1035 1036 static irqreturn_t mrf24j40_isr(int irq, void *data) 1037 { 1038 struct mrf24j40 *devrec = data; 1039 int ret; 1040 1041 disable_irq_nosync(irq); 1042 1043 devrec->irq_buf[0] = MRF24J40_READSHORT(REG_INTSTAT); 1044 /* Read the interrupt status */ 1045 ret = spi_async(devrec->spi, &devrec->irq_msg); 1046 if (ret) { 1047 enable_irq(irq); 1048 return IRQ_NONE; 1049 } 1050 1051 return IRQ_HANDLED; 1052 } 1053 1054 static int mrf24j40_hw_init(struct mrf24j40 *devrec) 1055 { 1056 u32 irq_type; 1057 int ret; 1058 1059 /* Initialize the device. 1060 From datasheet section 3.2: Initialization. */ 1061 ret = regmap_write(devrec->regmap_short, REG_SOFTRST, 0x07); 1062 if (ret) 1063 goto err_ret; 1064 1065 ret = regmap_write(devrec->regmap_short, REG_PACON2, 0x98); 1066 if (ret) 1067 goto err_ret; 1068 1069 ret = regmap_write(devrec->regmap_short, REG_TXSTBL, 0x95); 1070 if (ret) 1071 goto err_ret; 1072 1073 ret = regmap_write(devrec->regmap_long, REG_RFCON0, 0x03); 1074 if (ret) 1075 goto err_ret; 1076 1077 ret = regmap_write(devrec->regmap_long, REG_RFCON1, 0x01); 1078 if (ret) 1079 goto err_ret; 1080 1081 ret = regmap_write(devrec->regmap_long, REG_RFCON2, 0x80); 1082 if (ret) 1083 goto err_ret; 1084 1085 ret = regmap_write(devrec->regmap_long, REG_RFCON6, 0x90); 1086 if (ret) 1087 goto err_ret; 1088 1089 ret = regmap_write(devrec->regmap_long, REG_RFCON7, 0x80); 1090 if (ret) 1091 goto err_ret; 1092 1093 ret = regmap_write(devrec->regmap_long, REG_RFCON8, 0x10); 1094 if (ret) 1095 goto err_ret; 1096 1097 ret = regmap_write(devrec->regmap_long, REG_SLPCON1, 0x21); 1098 if (ret) 1099 goto err_ret; 1100 1101 ret = regmap_write(devrec->regmap_short, REG_BBREG2, 0x80); 1102 if (ret) 1103 goto err_ret; 1104 1105 ret = regmap_write(devrec->regmap_short, REG_CCAEDTH, 0x60); 1106 if (ret) 1107 goto err_ret; 1108 1109 ret = regmap_write(devrec->regmap_short, REG_BBREG6, 0x40); 1110 if (ret) 1111 goto err_ret; 1112 1113 ret = regmap_write(devrec->regmap_short, REG_RFCTL, 0x04); 1114 if (ret) 1115 goto err_ret; 1116 1117 ret = regmap_write(devrec->regmap_short, REG_RFCTL, 0x0); 1118 if (ret) 1119 goto err_ret; 1120 1121 udelay(192); 1122 1123 /* Set RX Mode. RXMCR<1:0>: 0x0 normal, 0x1 promisc, 0x2 error */ 1124 ret = regmap_update_bits(devrec->regmap_short, REG_RXMCR, 0x03, 0x00); 1125 if (ret) 1126 goto err_ret; 1127 1128 if (spi_get_device_id(devrec->spi)->driver_data == MRF24J40MC) { 1129 /* Enable external amplifier. 1130 * From MRF24J40MC datasheet section 1.3: Operation. 1131 */ 1132 regmap_update_bits(devrec->regmap_long, REG_TESTMODE, 0x07, 1133 0x07); 1134 1135 /* Set GPIO3 as output. */ 1136 regmap_update_bits(devrec->regmap_short, REG_TRISGPIO, 0x08, 1137 0x08); 1138 1139 /* Set GPIO3 HIGH to enable U5 voltage regulator */ 1140 regmap_update_bits(devrec->regmap_short, REG_GPIO, 0x08, 0x08); 1141 1142 /* Reduce TX pwr to meet FCC requirements. 1143 * From MRF24J40MC datasheet section 3.1.1 1144 */ 1145 regmap_write(devrec->regmap_long, REG_RFCON3, 0x28); 1146 } 1147 1148 irq_type = irq_get_trigger_type(devrec->spi->irq); 1149 if (irq_type == IRQ_TYPE_EDGE_RISING || 1150 irq_type == IRQ_TYPE_EDGE_FALLING) 1151 dev_warn(&devrec->spi->dev, 1152 "Using edge triggered irq's are not recommended, because it can cause races and result in a non-functional driver!\n"); 1153 switch (irq_type) { 1154 case IRQ_TYPE_EDGE_RISING: 1155 case IRQ_TYPE_LEVEL_HIGH: 1156 /* set interrupt polarity to rising */ 1157 ret = regmap_update_bits(devrec->regmap_long, REG_SLPCON0, 1158 BIT_INTEDGE, BIT_INTEDGE); 1159 if (ret) 1160 goto err_ret; 1161 break; 1162 default: 1163 /* default is falling edge */ 1164 break; 1165 } 1166 1167 return 0; 1168 1169 err_ret: 1170 return ret; 1171 } 1172 1173 static void 1174 mrf24j40_setup_tx_spi_messages(struct mrf24j40 *devrec) 1175 { 1176 spi_message_init(&devrec->tx_msg); 1177 devrec->tx_msg.context = devrec; 1178 devrec->tx_msg.complete = write_tx_buf_complete; 1179 devrec->tx_hdr_trx.len = 2; 1180 devrec->tx_hdr_trx.tx_buf = devrec->tx_hdr_buf; 1181 spi_message_add_tail(&devrec->tx_hdr_trx, &devrec->tx_msg); 1182 devrec->tx_len_trx.len = 2; 1183 devrec->tx_len_trx.tx_buf = devrec->tx_len_buf; 1184 spi_message_add_tail(&devrec->tx_len_trx, &devrec->tx_msg); 1185 spi_message_add_tail(&devrec->tx_buf_trx, &devrec->tx_msg); 1186 1187 spi_message_init(&devrec->tx_post_msg); 1188 devrec->tx_post_msg.context = devrec; 1189 devrec->tx_post_trx.len = 2; 1190 devrec->tx_post_trx.tx_buf = devrec->tx_post_buf; 1191 spi_message_add_tail(&devrec->tx_post_trx, &devrec->tx_post_msg); 1192 } 1193 1194 static void 1195 mrf24j40_setup_rx_spi_messages(struct mrf24j40 *devrec) 1196 { 1197 spi_message_init(&devrec->rx_msg); 1198 devrec->rx_msg.context = devrec; 1199 devrec->rx_trx.len = 2; 1200 devrec->rx_trx.tx_buf = devrec->rx_buf; 1201 devrec->rx_trx.rx_buf = devrec->rx_buf; 1202 spi_message_add_tail(&devrec->rx_trx, &devrec->rx_msg); 1203 1204 spi_message_init(&devrec->rx_buf_msg); 1205 devrec->rx_buf_msg.context = devrec; 1206 devrec->rx_buf_msg.complete = mrf24j40_handle_rx_read_buf_complete; 1207 devrec->rx_addr_trx.len = 2; 1208 devrec->rx_addr_trx.tx_buf = devrec->rx_addr_buf; 1209 spi_message_add_tail(&devrec->rx_addr_trx, &devrec->rx_buf_msg); 1210 devrec->rx_fifo_buf_trx.rx_buf = devrec->rx_fifo_buf; 1211 spi_message_add_tail(&devrec->rx_fifo_buf_trx, &devrec->rx_buf_msg); 1212 devrec->rx_lqi_trx.len = 2; 1213 devrec->rx_lqi_trx.rx_buf = devrec->rx_lqi_buf; 1214 spi_message_add_tail(&devrec->rx_lqi_trx, &devrec->rx_buf_msg); 1215 } 1216 1217 static void 1218 mrf24j40_setup_irq_spi_messages(struct mrf24j40 *devrec) 1219 { 1220 spi_message_init(&devrec->irq_msg); 1221 devrec->irq_msg.context = devrec; 1222 devrec->irq_msg.complete = mrf24j40_intstat_complete; 1223 devrec->irq_trx.len = 2; 1224 devrec->irq_trx.tx_buf = devrec->irq_buf; 1225 devrec->irq_trx.rx_buf = devrec->irq_buf; 1226 spi_message_add_tail(&devrec->irq_trx, &devrec->irq_msg); 1227 } 1228 1229 static void mrf24j40_phy_setup(struct mrf24j40 *devrec) 1230 { 1231 ieee802154_random_extended_addr(&devrec->hw->phy->perm_extended_addr); 1232 devrec->hw->phy->current_channel = 11; 1233 1234 /* mrf24j40 supports max_minbe 0 - 3 */ 1235 devrec->hw->phy->supported.max_minbe = 3; 1236 /* datasheet doesn't say anything about max_be, but we have min_be 1237 * So we assume the max_be default. 1238 */ 1239 devrec->hw->phy->supported.min_maxbe = 5; 1240 devrec->hw->phy->supported.max_maxbe = 5; 1241 1242 devrec->hw->phy->cca.mode = NL802154_CCA_CARRIER; 1243 devrec->hw->phy->supported.cca_modes = BIT(NL802154_CCA_ENERGY) | 1244 BIT(NL802154_CCA_CARRIER) | 1245 BIT(NL802154_CCA_ENERGY_CARRIER); 1246 devrec->hw->phy->supported.cca_opts = BIT(NL802154_CCA_OPT_ENERGY_CARRIER_AND); 1247 1248 devrec->hw->phy->cca_ed_level = -6900; 1249 devrec->hw->phy->supported.cca_ed_levels = mrf24j40_ed_levels; 1250 devrec->hw->phy->supported.cca_ed_levels_size = ARRAY_SIZE(mrf24j40_ed_levels); 1251 1252 switch (spi_get_device_id(devrec->spi)->driver_data) { 1253 case MRF24J40: 1254 case MRF24J40MA: 1255 devrec->hw->phy->supported.tx_powers = mrf24j40ma_powers; 1256 devrec->hw->phy->supported.tx_powers_size = ARRAY_SIZE(mrf24j40ma_powers); 1257 devrec->hw->phy->flags |= WPAN_PHY_FLAG_TXPOWER; 1258 break; 1259 default: 1260 break; 1261 } 1262 } 1263 1264 static int mrf24j40_probe(struct spi_device *spi) 1265 { 1266 int ret = -ENOMEM, irq_type; 1267 struct ieee802154_hw *hw; 1268 struct mrf24j40 *devrec; 1269 1270 dev_info(&spi->dev, "probe(). IRQ: %d\n", spi->irq); 1271 1272 /* Register with the 802154 subsystem */ 1273 1274 hw = ieee802154_alloc_hw(sizeof(*devrec), &mrf24j40_ops); 1275 if (!hw) 1276 goto err_ret; 1277 1278 devrec = hw->priv; 1279 devrec->spi = spi; 1280 spi_set_drvdata(spi, devrec); 1281 devrec->hw = hw; 1282 devrec->hw->parent = &spi->dev; 1283 devrec->hw->phy->supported.channels[0] = CHANNEL_MASK; 1284 devrec->hw->flags = IEEE802154_HW_TX_OMIT_CKSUM | IEEE802154_HW_AFILT | 1285 IEEE802154_HW_CSMA_PARAMS | 1286 IEEE802154_HW_PROMISCUOUS; 1287 1288 devrec->hw->phy->flags = WPAN_PHY_FLAG_CCA_MODE | 1289 WPAN_PHY_FLAG_CCA_ED_LEVEL; 1290 1291 mrf24j40_setup_tx_spi_messages(devrec); 1292 mrf24j40_setup_rx_spi_messages(devrec); 1293 mrf24j40_setup_irq_spi_messages(devrec); 1294 1295 devrec->regmap_short = devm_regmap_init_spi(spi, 1296 &mrf24j40_short_regmap); 1297 if (IS_ERR(devrec->regmap_short)) { 1298 ret = PTR_ERR(devrec->regmap_short); 1299 dev_err(&spi->dev, "Failed to allocate short register map: %d\n", 1300 ret); 1301 goto err_register_device; 1302 } 1303 1304 devrec->regmap_long = devm_regmap_init(&spi->dev, 1305 &mrf24j40_long_regmap_bus, 1306 spi, &mrf24j40_long_regmap); 1307 if (IS_ERR(devrec->regmap_long)) { 1308 ret = PTR_ERR(devrec->regmap_long); 1309 dev_err(&spi->dev, "Failed to allocate long register map: %d\n", 1310 ret); 1311 goto err_register_device; 1312 } 1313 1314 if (spi->max_speed_hz > MAX_SPI_SPEED_HZ) { 1315 dev_warn(&spi->dev, "spi clock above possible maximum: %d", 1316 MAX_SPI_SPEED_HZ); 1317 return -EINVAL; 1318 } 1319 1320 ret = mrf24j40_hw_init(devrec); 1321 if (ret) 1322 goto err_register_device; 1323 1324 mrf24j40_phy_setup(devrec); 1325 1326 /* request IRQF_TRIGGER_LOW as fallback default */ 1327 irq_type = irq_get_trigger_type(spi->irq); 1328 if (!irq_type) 1329 irq_type = IRQF_TRIGGER_LOW; 1330 1331 ret = devm_request_irq(&spi->dev, spi->irq, mrf24j40_isr, 1332 irq_type, dev_name(&spi->dev), devrec); 1333 if (ret) { 1334 dev_err(printdev(devrec), "Unable to get IRQ"); 1335 goto err_register_device; 1336 } 1337 1338 dev_dbg(printdev(devrec), "registered mrf24j40\n"); 1339 ret = ieee802154_register_hw(devrec->hw); 1340 if (ret) 1341 goto err_register_device; 1342 1343 return 0; 1344 1345 err_register_device: 1346 ieee802154_free_hw(devrec->hw); 1347 err_ret: 1348 return ret; 1349 } 1350 1351 static int mrf24j40_remove(struct spi_device *spi) 1352 { 1353 struct mrf24j40 *devrec = spi_get_drvdata(spi); 1354 1355 dev_dbg(printdev(devrec), "remove\n"); 1356 1357 ieee802154_unregister_hw(devrec->hw); 1358 ieee802154_free_hw(devrec->hw); 1359 /* TODO: Will ieee802154_free_device() wait until ->xmit() is 1360 * complete? */ 1361 1362 return 0; 1363 } 1364 1365 static const struct of_device_id mrf24j40_of_match[] = { 1366 { .compatible = "microchip,mrf24j40", .data = (void *)MRF24J40 }, 1367 { .compatible = "microchip,mrf24j40ma", .data = (void *)MRF24J40MA }, 1368 { .compatible = "microchip,mrf24j40mc", .data = (void *)MRF24J40MC }, 1369 { }, 1370 }; 1371 MODULE_DEVICE_TABLE(of, mrf24j40_of_match); 1372 1373 static const struct spi_device_id mrf24j40_ids[] = { 1374 { "mrf24j40", MRF24J40 }, 1375 { "mrf24j40ma", MRF24J40MA }, 1376 { "mrf24j40mc", MRF24J40MC }, 1377 { }, 1378 }; 1379 MODULE_DEVICE_TABLE(spi, mrf24j40_ids); 1380 1381 static struct spi_driver mrf24j40_driver = { 1382 .driver = { 1383 .of_match_table = of_match_ptr(mrf24j40_of_match), 1384 .name = "mrf24j40", 1385 .owner = THIS_MODULE, 1386 }, 1387 .id_table = mrf24j40_ids, 1388 .probe = mrf24j40_probe, 1389 .remove = mrf24j40_remove, 1390 }; 1391 1392 module_spi_driver(mrf24j40_driver); 1393 1394 MODULE_LICENSE("GPL"); 1395 MODULE_AUTHOR("Alan Ott"); 1396 MODULE_DESCRIPTION("MRF24J40 SPI 802.15.4 Controller Driver"); 1397