1 /* 2 * http://www.cascoda.com/products/ca-821x/ 3 * Copyright (c) 2016, Cascoda, Ltd. 4 * All rights reserved. 5 * 6 * This code is dual-licensed under both GPLv2 and 3-clause BSD. What follows is 7 * the license notice for both respectively. 8 * 9 ******************************************************************************* 10 * 11 * This program is free software; you can redistribute it and/or 12 * modify it under the terms of the GNU General Public License 13 * as published by the Free Software Foundation; either version 2 14 * of the License, or (at your option) any later version. 15 * 16 * This program is distributed in the hope that it will be useful, 17 * but WITHOUT ANY WARRANTY; without even the implied warranty of 18 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 19 * GNU General Public License for more details. 20 * 21 ******************************************************************************* 22 * 23 * Redistribution and use in source and binary forms, with or without 24 * modification, are permitted provided that the following conditions are met: 25 * 26 * 1. Redistributions of source code must retain the above copyright notice, 27 * this list of conditions and the following disclaimer. 28 * 29 * 2. Redistributions in binary form must reproduce the above copyright notice, 30 * this list of conditions and the following disclaimer in the documentation 31 * and/or other materials provided with the distribution. 32 * 33 * 3. Neither the name of the copyright holder nor the names of its contributors 34 * may be used to endorse or promote products derived from this software without 35 * specific prior written permission. 36 * 37 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" 38 * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 39 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 40 * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDERS OR CONTRIBUTORS BE 41 * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR 42 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF 43 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 44 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 45 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 46 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE 47 * POSSIBILITY OF SUCH DAMAGE. 48 */ 49 50 #include <linux/cdev.h> 51 #include <linux/clk-provider.h> 52 #include <linux/debugfs.h> 53 #include <linux/delay.h> 54 #include <linux/gpio.h> 55 #include <linux/ieee802154.h> 56 #include <linux/io.h> 57 #include <linux/kfifo.h> 58 #include <linux/of.h> 59 #include <linux/of_device.h> 60 #include <linux/of_gpio.h> 61 #include <linux/module.h> 62 #include <linux/mutex.h> 63 #include <linux/poll.h> 64 #include <linux/skbuff.h> 65 #include <linux/slab.h> 66 #include <linux/spi/spi.h> 67 #include <linux/spinlock.h> 68 #include <linux/string.h> 69 #include <linux/workqueue.h> 70 #include <linux/interrupt.h> 71 72 #include <net/ieee802154_netdev.h> 73 #include <net/mac802154.h> 74 75 #define DRIVER_NAME "ca8210" 76 77 /* external clock frequencies */ 78 #define ONE_MHZ 1000000 79 #define TWO_MHZ (2 * ONE_MHZ) 80 #define FOUR_MHZ (4 * ONE_MHZ) 81 #define EIGHT_MHZ (8 * ONE_MHZ) 82 #define SIXTEEN_MHZ (16 * ONE_MHZ) 83 84 /* spi constants */ 85 #define CA8210_SPI_BUF_SIZE 256 86 #define CA8210_SYNC_TIMEOUT 1000 /* Timeout for synchronous commands [ms] */ 87 88 /* test interface constants */ 89 #define CA8210_TEST_INT_FILE_NAME "ca8210_test" 90 #define CA8210_TEST_INT_FIFO_SIZE 256 91 92 /* MAC status enumerations */ 93 #define MAC_SUCCESS (0x00) 94 #define MAC_ERROR (0x01) 95 #define MAC_CANCELLED (0x02) 96 #define MAC_READY_FOR_POLL (0x03) 97 #define MAC_COUNTER_ERROR (0xDB) 98 #define MAC_IMPROPER_KEY_TYPE (0xDC) 99 #define MAC_IMPROPER_SECURITY_LEVEL (0xDD) 100 #define MAC_UNSUPPORTED_LEGACY (0xDE) 101 #define MAC_UNSUPPORTED_SECURITY (0xDF) 102 #define MAC_BEACON_LOST (0xE0) 103 #define MAC_CHANNEL_ACCESS_FAILURE (0xE1) 104 #define MAC_DENIED (0xE2) 105 #define MAC_DISABLE_TRX_FAILURE (0xE3) 106 #define MAC_SECURITY_ERROR (0xE4) 107 #define MAC_FRAME_TOO_LONG (0xE5) 108 #define MAC_INVALID_GTS (0xE6) 109 #define MAC_INVALID_HANDLE (0xE7) 110 #define MAC_INVALID_PARAMETER (0xE8) 111 #define MAC_NO_ACK (0xE9) 112 #define MAC_NO_BEACON (0xEA) 113 #define MAC_NO_DATA (0xEB) 114 #define MAC_NO_SHORT_ADDRESS (0xEC) 115 #define MAC_OUT_OF_CAP (0xED) 116 #define MAC_PAN_ID_CONFLICT (0xEE) 117 #define MAC_REALIGNMENT (0xEF) 118 #define MAC_TRANSACTION_EXPIRED (0xF0) 119 #define MAC_TRANSACTION_OVERFLOW (0xF1) 120 #define MAC_TX_ACTIVE (0xF2) 121 #define MAC_UNAVAILABLE_KEY (0xF3) 122 #define MAC_UNSUPPORTED_ATTRIBUTE (0xF4) 123 #define MAC_INVALID_ADDRESS (0xF5) 124 #define MAC_ON_TIME_TOO_LONG (0xF6) 125 #define MAC_PAST_TIME (0xF7) 126 #define MAC_TRACKING_OFF (0xF8) 127 #define MAC_INVALID_INDEX (0xF9) 128 #define MAC_LIMIT_REACHED (0xFA) 129 #define MAC_READ_ONLY (0xFB) 130 #define MAC_SCAN_IN_PROGRESS (0xFC) 131 #define MAC_SUPERFRAME_OVERLAP (0xFD) 132 #define MAC_SYSTEM_ERROR (0xFF) 133 134 /* HWME attribute IDs */ 135 #define HWME_EDTHRESHOLD (0x04) 136 #define HWME_EDVALUE (0x06) 137 #define HWME_SYSCLKOUT (0x0F) 138 #define HWME_LQILIMIT (0x11) 139 140 /* TDME attribute IDs */ 141 #define TDME_CHANNEL (0x00) 142 #define TDME_ATM_CONFIG (0x06) 143 144 #define MAX_HWME_ATTRIBUTE_SIZE 16 145 #define MAX_TDME_ATTRIBUTE_SIZE 2 146 147 /* PHY/MAC PIB Attribute Enumerations */ 148 #define PHY_CURRENT_CHANNEL (0x00) 149 #define PHY_TRANSMIT_POWER (0x02) 150 #define PHY_CCA_MODE (0x03) 151 #define MAC_ASSOCIATION_PERMIT (0x41) 152 #define MAC_AUTO_REQUEST (0x42) 153 #define MAC_BATT_LIFE_EXT (0x43) 154 #define MAC_BATT_LIFE_EXT_PERIODS (0x44) 155 #define MAC_BEACON_PAYLOAD (0x45) 156 #define MAC_BEACON_PAYLOAD_LENGTH (0x46) 157 #define MAC_BEACON_ORDER (0x47) 158 #define MAC_GTS_PERMIT (0x4d) 159 #define MAC_MAX_CSMA_BACKOFFS (0x4e) 160 #define MAC_MIN_BE (0x4f) 161 #define MAC_PAN_ID (0x50) 162 #define MAC_PROMISCUOUS_MODE (0x51) 163 #define MAC_RX_ON_WHEN_IDLE (0x52) 164 #define MAC_SHORT_ADDRESS (0x53) 165 #define MAC_SUPERFRAME_ORDER (0x54) 166 #define MAC_ASSOCIATED_PAN_COORD (0x56) 167 #define MAC_MAX_BE (0x57) 168 #define MAC_MAX_FRAME_RETRIES (0x59) 169 #define MAC_RESPONSE_WAIT_TIME (0x5A) 170 #define MAC_SECURITY_ENABLED (0x5D) 171 172 #define MAC_AUTO_REQUEST_SECURITY_LEVEL (0x78) 173 #define MAC_AUTO_REQUEST_KEY_ID_MODE (0x79) 174 175 #define NS_IEEE_ADDRESS (0xFF) /* Non-standard IEEE address */ 176 177 /* MAC Address Mode Definitions */ 178 #define MAC_MODE_NO_ADDR (0x00) 179 #define MAC_MODE_SHORT_ADDR (0x02) 180 #define MAC_MODE_LONG_ADDR (0x03) 181 182 /* MAC constants */ 183 #define MAX_BEACON_OVERHEAD (75) 184 #define MAX_BEACON_PAYLOAD_LENGTH (IEEE802154_MTU - MAX_BEACON_OVERHEAD) 185 186 #define MAX_ATTRIBUTE_SIZE (122) 187 #define MAX_DATA_SIZE (114) 188 189 #define CA8210_VALID_CHANNELS (0x07FFF800) 190 191 /* MAC workarounds for V1.1 and MPW silicon (V0.x) */ 192 #define CA8210_MAC_WORKAROUNDS (0) 193 #define CA8210_MAC_MPW (0) 194 195 /* memory manipulation macros */ 196 #define LS_BYTE(x) ((u8)((x) & 0xFF)) 197 #define MS_BYTE(x) ((u8)(((x) >> 8) & 0xFF)) 198 199 /* message ID codes in SPI commands */ 200 /* downstream */ 201 #define MCPS_DATA_REQUEST (0x00) 202 #define MLME_ASSOCIATE_REQUEST (0x02) 203 #define MLME_ASSOCIATE_RESPONSE (0x03) 204 #define MLME_DISASSOCIATE_REQUEST (0x04) 205 #define MLME_GET_REQUEST (0x05) 206 #define MLME_ORPHAN_RESPONSE (0x06) 207 #define MLME_RESET_REQUEST (0x07) 208 #define MLME_RX_ENABLE_REQUEST (0x08) 209 #define MLME_SCAN_REQUEST (0x09) 210 #define MLME_SET_REQUEST (0x0A) 211 #define MLME_START_REQUEST (0x0B) 212 #define MLME_POLL_REQUEST (0x0D) 213 #define HWME_SET_REQUEST (0x0E) 214 #define HWME_GET_REQUEST (0x0F) 215 #define TDME_SETSFR_REQUEST (0x11) 216 #define TDME_GETSFR_REQUEST (0x12) 217 #define TDME_SET_REQUEST (0x14) 218 /* upstream */ 219 #define MCPS_DATA_INDICATION (0x00) 220 #define MCPS_DATA_CONFIRM (0x01) 221 #define MLME_RESET_CONFIRM (0x0A) 222 #define MLME_SET_CONFIRM (0x0E) 223 #define MLME_START_CONFIRM (0x0F) 224 #define HWME_SET_CONFIRM (0x12) 225 #define HWME_GET_CONFIRM (0x13) 226 #define HWME_WAKEUP_INDICATION (0x15) 227 #define TDME_SETSFR_CONFIRM (0x17) 228 229 /* SPI command IDs */ 230 /* bit indicating a confirm or indication from slave to master */ 231 #define SPI_S2M (0x20) 232 /* bit indicating a synchronous message */ 233 #define SPI_SYN (0x40) 234 235 /* SPI command definitions */ 236 #define SPI_IDLE (0xFF) 237 #define SPI_NACK (0xF0) 238 239 #define SPI_MCPS_DATA_REQUEST (MCPS_DATA_REQUEST) 240 #define SPI_MCPS_DATA_INDICATION (MCPS_DATA_INDICATION + SPI_S2M) 241 #define SPI_MCPS_DATA_CONFIRM (MCPS_DATA_CONFIRM + SPI_S2M) 242 243 #define SPI_MLME_ASSOCIATE_REQUEST (MLME_ASSOCIATE_REQUEST) 244 #define SPI_MLME_RESET_REQUEST (MLME_RESET_REQUEST + SPI_SYN) 245 #define SPI_MLME_SET_REQUEST (MLME_SET_REQUEST + SPI_SYN) 246 #define SPI_MLME_START_REQUEST (MLME_START_REQUEST + SPI_SYN) 247 #define SPI_MLME_RESET_CONFIRM (MLME_RESET_CONFIRM + SPI_S2M + SPI_SYN) 248 #define SPI_MLME_SET_CONFIRM (MLME_SET_CONFIRM + SPI_S2M + SPI_SYN) 249 #define SPI_MLME_START_CONFIRM (MLME_START_CONFIRM + SPI_S2M + SPI_SYN) 250 251 #define SPI_HWME_SET_REQUEST (HWME_SET_REQUEST + SPI_SYN) 252 #define SPI_HWME_GET_REQUEST (HWME_GET_REQUEST + SPI_SYN) 253 #define SPI_HWME_SET_CONFIRM (HWME_SET_CONFIRM + SPI_S2M + SPI_SYN) 254 #define SPI_HWME_GET_CONFIRM (HWME_GET_CONFIRM + SPI_S2M + SPI_SYN) 255 #define SPI_HWME_WAKEUP_INDICATION (HWME_WAKEUP_INDICATION + SPI_S2M) 256 257 #define SPI_TDME_SETSFR_REQUEST (TDME_SETSFR_REQUEST + SPI_SYN) 258 #define SPI_TDME_SET_REQUEST (TDME_SET_REQUEST + SPI_SYN) 259 #define SPI_TDME_SETSFR_CONFIRM (TDME_SETSFR_CONFIRM + SPI_S2M + SPI_SYN) 260 261 /* TDME SFR addresses */ 262 /* Page 0 */ 263 #define CA8210_SFR_PACFG (0xB1) 264 #define CA8210_SFR_MACCON (0xD8) 265 #define CA8210_SFR_PACFGIB (0xFE) 266 /* Page 1 */ 267 #define CA8210_SFR_LOTXCAL (0xBF) 268 #define CA8210_SFR_PTHRH (0xD1) 269 #define CA8210_SFR_PRECFG (0xD3) 270 #define CA8210_SFR_LNAGX40 (0xE1) 271 #define CA8210_SFR_LNAGX41 (0xE2) 272 #define CA8210_SFR_LNAGX42 (0xE3) 273 #define CA8210_SFR_LNAGX43 (0xE4) 274 #define CA8210_SFR_LNAGX44 (0xE5) 275 #define CA8210_SFR_LNAGX45 (0xE6) 276 #define CA8210_SFR_LNAGX46 (0xE7) 277 #define CA8210_SFR_LNAGX47 (0xE9) 278 279 #define PACFGIB_DEFAULT_CURRENT (0x3F) 280 #define PTHRH_DEFAULT_THRESHOLD (0x5A) 281 #define LNAGX40_DEFAULT_GAIN (0x29) /* 10dB */ 282 #define LNAGX41_DEFAULT_GAIN (0x54) /* 21dB */ 283 #define LNAGX42_DEFAULT_GAIN (0x6C) /* 27dB */ 284 #define LNAGX43_DEFAULT_GAIN (0x7A) /* 30dB */ 285 #define LNAGX44_DEFAULT_GAIN (0x84) /* 33dB */ 286 #define LNAGX45_DEFAULT_GAIN (0x8B) /* 34dB */ 287 #define LNAGX46_DEFAULT_GAIN (0x92) /* 36dB */ 288 #define LNAGX47_DEFAULT_GAIN (0x96) /* 37dB */ 289 290 #define CA8210_IOCTL_HARD_RESET (0x00) 291 292 /* Structs/Enums */ 293 294 /** 295 * struct cas_control - spi transfer structure 296 * @msg: spi_message for each exchange 297 * @transfer: spi_transfer for each exchange 298 * @tx_buf: source array for transmission 299 * @tx_in_buf: array storing bytes received during transmission 300 * @priv: pointer to private data 301 * 302 * This structure stores all the necessary data passed around during a single 303 * spi exchange. 304 */ 305 struct cas_control { 306 struct spi_message msg; 307 struct spi_transfer transfer; 308 309 u8 tx_buf[CA8210_SPI_BUF_SIZE]; 310 u8 tx_in_buf[CA8210_SPI_BUF_SIZE]; 311 312 struct ca8210_priv *priv; 313 }; 314 315 /** 316 * struct ca8210_test - ca8210 test interface structure 317 * @ca8210_dfs_spi_int: pointer to the entry in the debug fs for this device 318 * @up_fifo: fifo for upstream messages 319 * 320 * This structure stores all the data pertaining to the debug interface 321 */ 322 struct ca8210_test { 323 struct dentry *ca8210_dfs_spi_int; 324 struct kfifo up_fifo; 325 wait_queue_head_t readq; 326 }; 327 328 /** 329 * struct ca8210_priv - ca8210 private data structure 330 * @spi: pointer to the ca8210 spi device object 331 * @hw: pointer to the ca8210 ieee802154_hw object 332 * @hw_registered: true if hw has been registered with ieee802154 333 * @lock: spinlock protecting the private data area 334 * @mlme_workqueue: workqueue for triggering MLME Reset 335 * @irq_workqueue: workqueue for irq processing 336 * @tx_skb: current socket buffer to transmit 337 * @nextmsduhandle: msdu handle to pass to the 15.4 MAC layer for the 338 * next transmission 339 * @clk: external clock provided by the ca8210 340 * @last_dsn: sequence number of last data packet received, for 341 * resend detection 342 * @test: test interface data section for this instance 343 * @async_tx_pending: true if an asynchronous transmission was started and 344 * is not complete 345 * @sync_command_response: pointer to buffer to fill with sync response 346 * @ca8210_is_awake: nonzero if ca8210 is initialised, ready for comms 347 * @sync_down: counts number of downstream synchronous commands 348 * @sync_up: counts number of upstream synchronous commands 349 * @spi_transfer_complete completion object for a single spi_transfer 350 * @sync_exchange_complete completion object for a complete synchronous API 351 * exchange 352 * @promiscuous whether the ca8210 is in promiscuous mode or not 353 * @retries: records how many times the current pending spi 354 * transfer has been retried 355 */ 356 struct ca8210_priv { 357 struct spi_device *spi; 358 struct ieee802154_hw *hw; 359 bool hw_registered; 360 spinlock_t lock; 361 struct workqueue_struct *mlme_workqueue; 362 struct workqueue_struct *irq_workqueue; 363 struct sk_buff *tx_skb; 364 u8 nextmsduhandle; 365 struct clk *clk; 366 int last_dsn; 367 struct ca8210_test test; 368 bool async_tx_pending; 369 u8 *sync_command_response; 370 struct completion ca8210_is_awake; 371 int sync_down, sync_up; 372 struct completion spi_transfer_complete, sync_exchange_complete; 373 bool promiscuous; 374 int retries; 375 }; 376 377 /** 378 * struct work_priv_container - link between a work object and the relevant 379 * device's private data 380 * @work: work object being executed 381 * @priv: device's private data section 382 * 383 */ 384 struct work_priv_container { 385 struct work_struct work; 386 struct ca8210_priv *priv; 387 }; 388 389 /** 390 * struct ca8210_platform_data - ca8210 platform data structure 391 * @extclockenable: true if the external clock is to be enabled 392 * @extclockfreq: frequency of the external clock 393 * @extclockgpio: ca8210 output gpio of the external clock 394 * @gpio_reset: gpio number of ca8210 reset line 395 * @gpio_irq: gpio number of ca8210 interrupt line 396 * @irq_id: identifier for the ca8210 irq 397 * 398 */ 399 struct ca8210_platform_data { 400 bool extclockenable; 401 unsigned int extclockfreq; 402 unsigned int extclockgpio; 403 int gpio_reset; 404 int gpio_irq; 405 int irq_id; 406 }; 407 408 /** 409 * struct fulladdr - full MAC addressing information structure 410 * @mode: address mode (none, short, extended) 411 * @pan_id: 16-bit LE pan id 412 * @address: LE address, variable length as specified by mode 413 * 414 */ 415 struct fulladdr { 416 u8 mode; 417 u8 pan_id[2]; 418 u8 address[8]; 419 }; 420 421 /** 422 * union macaddr: generic MAC address container 423 * @short_addr: 16-bit short address 424 * @ieee_address: 64-bit extended address as LE byte array 425 * 426 */ 427 union macaddr { 428 u16 short_address; 429 u8 ieee_address[8]; 430 }; 431 432 /** 433 * struct secspec: security specification for SAP commands 434 * @security_level: 0-7, controls level of authentication & encryption 435 * @key_id_mode: 0-3, specifies how to obtain key 436 * @key_source: extended key retrieval data 437 * @key_index: single-byte key identifier 438 * 439 */ 440 struct secspec { 441 u8 security_level; 442 u8 key_id_mode; 443 u8 key_source[8]; 444 u8 key_index; 445 }; 446 447 /* downlink functions parameter set definitions */ 448 struct mcps_data_request_pset { 449 u8 src_addr_mode; 450 struct fulladdr dst; 451 u8 msdu_length; 452 u8 msdu_handle; 453 u8 tx_options; 454 u8 msdu[MAX_DATA_SIZE]; 455 }; 456 457 struct mlme_set_request_pset { 458 u8 pib_attribute; 459 u8 pib_attribute_index; 460 u8 pib_attribute_length; 461 u8 pib_attribute_value[MAX_ATTRIBUTE_SIZE]; 462 }; 463 464 struct hwme_set_request_pset { 465 u8 hw_attribute; 466 u8 hw_attribute_length; 467 u8 hw_attribute_value[MAX_HWME_ATTRIBUTE_SIZE]; 468 }; 469 470 struct hwme_get_request_pset { 471 u8 hw_attribute; 472 }; 473 474 struct tdme_setsfr_request_pset { 475 u8 sfr_page; 476 u8 sfr_address; 477 u8 sfr_value; 478 }; 479 480 /* uplink functions parameter set definitions */ 481 struct hwme_set_confirm_pset { 482 u8 status; 483 u8 hw_attribute; 484 }; 485 486 struct hwme_get_confirm_pset { 487 u8 status; 488 u8 hw_attribute; 489 u8 hw_attribute_length; 490 u8 hw_attribute_value[MAX_HWME_ATTRIBUTE_SIZE]; 491 }; 492 493 struct tdme_setsfr_confirm_pset { 494 u8 status; 495 u8 sfr_page; 496 u8 sfr_address; 497 }; 498 499 struct mac_message { 500 u8 command_id; 501 u8 length; 502 union { 503 struct mcps_data_request_pset data_req; 504 struct mlme_set_request_pset set_req; 505 struct hwme_set_request_pset hwme_set_req; 506 struct hwme_get_request_pset hwme_get_req; 507 struct tdme_setsfr_request_pset tdme_set_sfr_req; 508 struct hwme_set_confirm_pset hwme_set_cnf; 509 struct hwme_get_confirm_pset hwme_get_cnf; 510 struct tdme_setsfr_confirm_pset tdme_set_sfr_cnf; 511 u8 u8param; 512 u8 status; 513 u8 payload[148]; 514 } pdata; 515 }; 516 517 union pa_cfg_sfr { 518 struct { 519 u8 bias_current_trim : 3; 520 u8 /* reserved */ : 1; 521 u8 buffer_capacitor_trim : 3; 522 u8 boost : 1; 523 }; 524 u8 paib; 525 }; 526 527 struct preamble_cfg_sfr { 528 u8 timeout_symbols : 3; 529 u8 acquisition_symbols : 3; 530 u8 search_symbols : 2; 531 }; 532 533 static int (*cascoda_api_upstream)( 534 const u8 *buf, 535 size_t len, 536 void *device_ref 537 ); 538 539 /** 540 * link_to_linux_err() - Translates an 802.15.4 return code into the closest 541 * linux error 542 * @link_status: 802.15.4 status code 543 * 544 * Return: 0 or Linux error code 545 */ 546 static int link_to_linux_err(int link_status) 547 { 548 if (link_status < 0) { 549 /* status is already a Linux code */ 550 return link_status; 551 } 552 switch (link_status) { 553 case MAC_SUCCESS: 554 case MAC_REALIGNMENT: 555 return 0; 556 case MAC_IMPROPER_KEY_TYPE: 557 return -EKEYREJECTED; 558 case MAC_IMPROPER_SECURITY_LEVEL: 559 case MAC_UNSUPPORTED_LEGACY: 560 case MAC_DENIED: 561 return -EACCES; 562 case MAC_BEACON_LOST: 563 case MAC_NO_ACK: 564 case MAC_NO_BEACON: 565 return -ENETUNREACH; 566 case MAC_CHANNEL_ACCESS_FAILURE: 567 case MAC_TX_ACTIVE: 568 case MAC_SCAN_IN_PROGRESS: 569 return -EBUSY; 570 case MAC_DISABLE_TRX_FAILURE: 571 case MAC_OUT_OF_CAP: 572 return -EAGAIN; 573 case MAC_FRAME_TOO_LONG: 574 return -EMSGSIZE; 575 case MAC_INVALID_GTS: 576 case MAC_PAST_TIME: 577 return -EBADSLT; 578 case MAC_INVALID_HANDLE: 579 return -EBADMSG; 580 case MAC_INVALID_PARAMETER: 581 case MAC_UNSUPPORTED_ATTRIBUTE: 582 case MAC_ON_TIME_TOO_LONG: 583 case MAC_INVALID_INDEX: 584 return -EINVAL; 585 case MAC_NO_DATA: 586 return -ENODATA; 587 case MAC_NO_SHORT_ADDRESS: 588 return -EFAULT; 589 case MAC_PAN_ID_CONFLICT: 590 return -EADDRINUSE; 591 case MAC_TRANSACTION_EXPIRED: 592 return -ETIME; 593 case MAC_TRANSACTION_OVERFLOW: 594 return -ENOBUFS; 595 case MAC_UNAVAILABLE_KEY: 596 return -ENOKEY; 597 case MAC_INVALID_ADDRESS: 598 return -ENXIO; 599 case MAC_TRACKING_OFF: 600 case MAC_SUPERFRAME_OVERLAP: 601 return -EREMOTEIO; 602 case MAC_LIMIT_REACHED: 603 return -EDQUOT; 604 case MAC_READ_ONLY: 605 return -EROFS; 606 default: 607 return -EPROTO; 608 } 609 } 610 611 /** 612 * ca8210_test_int_driver_write() - Writes a message to the test interface to be 613 * read by the userspace 614 * @buf: Buffer containing upstream message 615 * @len: length of message to write 616 * @spi: SPI device of message originator 617 * 618 * Return: 0 or linux error code 619 */ 620 static int ca8210_test_int_driver_write( 621 const u8 *buf, 622 size_t len, 623 void *spi 624 ) 625 { 626 struct ca8210_priv *priv = spi_get_drvdata(spi); 627 struct ca8210_test *test = &priv->test; 628 char *fifo_buffer; 629 int i; 630 631 dev_dbg( 632 &priv->spi->dev, 633 "test_interface: Buffering upstream message:\n" 634 ); 635 for (i = 0; i < len; i++) 636 dev_dbg(&priv->spi->dev, "%#03x\n", buf[i]); 637 638 fifo_buffer = kmemdup(buf, len, GFP_KERNEL); 639 if (!fifo_buffer) 640 return -ENOMEM; 641 kfifo_in(&test->up_fifo, &fifo_buffer, 4); 642 wake_up_interruptible(&priv->test.readq); 643 644 return 0; 645 } 646 647 /* SPI Operation */ 648 649 static int ca8210_net_rx( 650 struct ieee802154_hw *hw, 651 u8 *command, 652 size_t len 653 ); 654 static u8 mlme_reset_request_sync( 655 u8 set_default_pib, 656 void *device_ref 657 ); 658 static int ca8210_spi_transfer( 659 struct spi_device *spi, 660 const u8 *buf, 661 size_t len 662 ); 663 664 /** 665 * ca8210_reset_send() - Hard resets the ca8210 for a given time 666 * @spi: Pointer to target ca8210 spi device 667 * @ms: Milliseconds to hold the reset line low for 668 */ 669 static void ca8210_reset_send(struct spi_device *spi, unsigned int ms) 670 { 671 struct ca8210_platform_data *pdata = spi->dev.platform_data; 672 struct ca8210_priv *priv = spi_get_drvdata(spi); 673 long status; 674 675 gpio_set_value(pdata->gpio_reset, 0); 676 reinit_completion(&priv->ca8210_is_awake); 677 msleep(ms); 678 gpio_set_value(pdata->gpio_reset, 1); 679 priv->promiscuous = false; 680 681 /* Wait until wakeup indication seen */ 682 status = wait_for_completion_interruptible_timeout( 683 &priv->ca8210_is_awake, 684 msecs_to_jiffies(CA8210_SYNC_TIMEOUT) 685 ); 686 if (status == 0) { 687 dev_crit( 688 &spi->dev, 689 "Fatal: No wakeup from ca8210 after reset!\n" 690 ); 691 } 692 693 dev_dbg(&spi->dev, "Reset the device\n"); 694 } 695 696 /** 697 * ca8210_mlme_reset_worker() - Resets the MLME, Called when the MAC OVERFLOW 698 * condition happens. 699 * @work: Pointer to work being executed 700 */ 701 static void ca8210_mlme_reset_worker(struct work_struct *work) 702 { 703 struct work_priv_container *wpc = container_of( 704 work, 705 struct work_priv_container, 706 work 707 ); 708 struct ca8210_priv *priv = wpc->priv; 709 710 mlme_reset_request_sync(0, priv->spi); 711 kfree(wpc); 712 } 713 714 /** 715 * ca8210_rx_done() - Calls various message dispatches responding to a received 716 * command 717 * @arg: Pointer to the cas_control object for the relevant spi transfer 718 * 719 * Presents a received SAP command from the ca8210 to the Cascoda EVBME, test 720 * interface and network driver. 721 */ 722 static void ca8210_rx_done(struct cas_control *cas_ctl) 723 { 724 u8 *buf; 725 unsigned int len; 726 struct work_priv_container *mlme_reset_wpc; 727 struct ca8210_priv *priv = cas_ctl->priv; 728 729 buf = cas_ctl->tx_in_buf; 730 len = buf[1] + 2; 731 if (len > CA8210_SPI_BUF_SIZE) { 732 dev_crit( 733 &priv->spi->dev, 734 "Received packet len (%u) erroneously long\n", 735 len 736 ); 737 goto finish; 738 } 739 740 if (buf[0] & SPI_SYN) { 741 if (priv->sync_command_response) { 742 memcpy(priv->sync_command_response, buf, len); 743 complete(&priv->sync_exchange_complete); 744 } else { 745 if (cascoda_api_upstream) 746 cascoda_api_upstream(buf, len, priv->spi); 747 priv->sync_up++; 748 } 749 } else { 750 if (cascoda_api_upstream) 751 cascoda_api_upstream(buf, len, priv->spi); 752 } 753 754 ca8210_net_rx(priv->hw, buf, len); 755 if (buf[0] == SPI_MCPS_DATA_CONFIRM) { 756 if (buf[3] == MAC_TRANSACTION_OVERFLOW) { 757 dev_info( 758 &priv->spi->dev, 759 "Waiting for transaction overflow to stabilise...\n"); 760 msleep(2000); 761 dev_info( 762 &priv->spi->dev, 763 "Resetting MAC...\n"); 764 765 mlme_reset_wpc = kmalloc(sizeof(*mlme_reset_wpc), 766 GFP_KERNEL); 767 if (!mlme_reset_wpc) 768 goto finish; 769 INIT_WORK( 770 &mlme_reset_wpc->work, 771 ca8210_mlme_reset_worker 772 ); 773 mlme_reset_wpc->priv = priv; 774 queue_work(priv->mlme_workqueue, &mlme_reset_wpc->work); 775 } 776 } else if (buf[0] == SPI_HWME_WAKEUP_INDICATION) { 777 dev_notice( 778 &priv->spi->dev, 779 "Wakeup indication received, reason:\n" 780 ); 781 switch (buf[2]) { 782 case 0: 783 dev_notice( 784 &priv->spi->dev, 785 "Transceiver woken up from Power Up / System Reset\n" 786 ); 787 break; 788 case 1: 789 dev_notice( 790 &priv->spi->dev, 791 "Watchdog Timer Time-Out\n" 792 ); 793 break; 794 case 2: 795 dev_notice( 796 &priv->spi->dev, 797 "Transceiver woken up from Power-Off by Sleep Timer Time-Out\n"); 798 break; 799 case 3: 800 dev_notice( 801 &priv->spi->dev, 802 "Transceiver woken up from Power-Off by GPIO Activity\n" 803 ); 804 break; 805 case 4: 806 dev_notice( 807 &priv->spi->dev, 808 "Transceiver woken up from Standby by Sleep Timer Time-Out\n" 809 ); 810 break; 811 case 5: 812 dev_notice( 813 &priv->spi->dev, 814 "Transceiver woken up from Standby by GPIO Activity\n" 815 ); 816 break; 817 case 6: 818 dev_notice( 819 &priv->spi->dev, 820 "Sleep-Timer Time-Out in Active Mode\n" 821 ); 822 break; 823 default: 824 dev_warn(&priv->spi->dev, "Wakeup reason unknown\n"); 825 break; 826 } 827 complete(&priv->ca8210_is_awake); 828 } 829 830 finish:; 831 } 832 833 static int ca8210_remove(struct spi_device *spi_device); 834 835 /** 836 * ca8210_spi_transfer_complete() - Called when a single spi transfer has 837 * completed 838 * @context: Pointer to the cas_control object for the finished transfer 839 */ 840 static void ca8210_spi_transfer_complete(void *context) 841 { 842 struct cas_control *cas_ctl = context; 843 struct ca8210_priv *priv = cas_ctl->priv; 844 bool duplex_rx = false; 845 int i; 846 u8 retry_buffer[CA8210_SPI_BUF_SIZE]; 847 848 if ( 849 cas_ctl->tx_in_buf[0] == SPI_NACK || 850 (cas_ctl->tx_in_buf[0] == SPI_IDLE && 851 cas_ctl->tx_in_buf[1] == SPI_NACK) 852 ) { 853 /* ca8210 is busy */ 854 dev_info(&priv->spi->dev, "ca8210 was busy during attempted write\n"); 855 if (cas_ctl->tx_buf[0] == SPI_IDLE) { 856 dev_warn( 857 &priv->spi->dev, 858 "IRQ servicing NACKd, dropping transfer\n" 859 ); 860 kfree(cas_ctl); 861 return; 862 } 863 if (priv->retries > 3) { 864 dev_err(&priv->spi->dev, "too many retries!\n"); 865 kfree(cas_ctl); 866 ca8210_remove(priv->spi); 867 return; 868 } 869 memcpy(retry_buffer, cas_ctl->tx_buf, CA8210_SPI_BUF_SIZE); 870 kfree(cas_ctl); 871 ca8210_spi_transfer( 872 priv->spi, 873 retry_buffer, 874 CA8210_SPI_BUF_SIZE 875 ); 876 priv->retries++; 877 dev_info(&priv->spi->dev, "retried spi write\n"); 878 return; 879 } else if ( 880 cas_ctl->tx_in_buf[0] != SPI_IDLE && 881 cas_ctl->tx_in_buf[0] != SPI_NACK 882 ) { 883 duplex_rx = true; 884 } 885 886 if (duplex_rx) { 887 dev_dbg(&priv->spi->dev, "READ CMD DURING TX\n"); 888 for (i = 0; i < cas_ctl->tx_in_buf[1] + 2; i++) 889 dev_dbg( 890 &priv->spi->dev, 891 "%#03x\n", 892 cas_ctl->tx_in_buf[i] 893 ); 894 ca8210_rx_done(cas_ctl); 895 } 896 complete(&priv->spi_transfer_complete); 897 kfree(cas_ctl); 898 priv->retries = 0; 899 } 900 901 /** 902 * ca8210_spi_transfer() - Initiate duplex spi transfer with ca8210 903 * @spi: Pointer to spi device for transfer 904 * @buf: Octet array to send 905 * @len: length of the buffer being sent 906 * 907 * Return: 0 or linux error code 908 */ 909 static int ca8210_spi_transfer( 910 struct spi_device *spi, 911 const u8 *buf, 912 size_t len 913 ) 914 { 915 int i, status = 0; 916 struct ca8210_priv *priv; 917 struct cas_control *cas_ctl; 918 919 if (!spi) { 920 pr_crit("NULL spi device passed to %s\n", __func__); 921 return -ENODEV; 922 } 923 924 priv = spi_get_drvdata(spi); 925 reinit_completion(&priv->spi_transfer_complete); 926 927 dev_dbg(&spi->dev, "%s called\n", __func__); 928 929 cas_ctl = kmalloc(sizeof(*cas_ctl), GFP_ATOMIC); 930 if (!cas_ctl) 931 return -ENOMEM; 932 933 cas_ctl->priv = priv; 934 memset(cas_ctl->tx_buf, SPI_IDLE, CA8210_SPI_BUF_SIZE); 935 memset(cas_ctl->tx_in_buf, SPI_IDLE, CA8210_SPI_BUF_SIZE); 936 memcpy(cas_ctl->tx_buf, buf, len); 937 938 for (i = 0; i < len; i++) 939 dev_dbg(&spi->dev, "%#03x\n", cas_ctl->tx_buf[i]); 940 941 spi_message_init(&cas_ctl->msg); 942 943 cas_ctl->transfer.tx_nbits = 1; /* 1 MOSI line */ 944 cas_ctl->transfer.rx_nbits = 1; /* 1 MISO line */ 945 cas_ctl->transfer.speed_hz = 0; /* Use device setting */ 946 cas_ctl->transfer.bits_per_word = 0; /* Use device setting */ 947 cas_ctl->transfer.tx_buf = cas_ctl->tx_buf; 948 cas_ctl->transfer.rx_buf = cas_ctl->tx_in_buf; 949 cas_ctl->transfer.delay.value = 0; 950 cas_ctl->transfer.delay.unit = SPI_DELAY_UNIT_USECS; 951 cas_ctl->transfer.cs_change = 0; 952 cas_ctl->transfer.len = sizeof(struct mac_message); 953 cas_ctl->msg.complete = ca8210_spi_transfer_complete; 954 cas_ctl->msg.context = cas_ctl; 955 956 spi_message_add_tail( 957 &cas_ctl->transfer, 958 &cas_ctl->msg 959 ); 960 961 status = spi_async(spi, &cas_ctl->msg); 962 if (status < 0) { 963 dev_crit( 964 &spi->dev, 965 "status %d from spi_sync in write\n", 966 status 967 ); 968 } 969 970 return status; 971 } 972 973 /** 974 * ca8210_spi_exchange() - Exchange API/SAP commands with the radio 975 * @buf: Octet array of command being sent downstream 976 * @len: length of buf 977 * @response: buffer for storing synchronous response 978 * @device_ref: spi_device pointer for ca8210 979 * 980 * Effectively calls ca8210_spi_transfer to write buf[] to the spi, then for 981 * synchronous commands waits for the corresponding response to be read from 982 * the spi before returning. The response is written to the response parameter. 983 * 984 * Return: 0 or linux error code 985 */ 986 static int ca8210_spi_exchange( 987 const u8 *buf, 988 size_t len, 989 u8 *response, 990 void *device_ref 991 ) 992 { 993 int status = 0; 994 struct spi_device *spi = device_ref; 995 struct ca8210_priv *priv = spi->dev.driver_data; 996 long wait_remaining; 997 998 if ((buf[0] & SPI_SYN) && response) { /* if sync wait for confirm */ 999 reinit_completion(&priv->sync_exchange_complete); 1000 priv->sync_command_response = response; 1001 } 1002 1003 do { 1004 reinit_completion(&priv->spi_transfer_complete); 1005 status = ca8210_spi_transfer(priv->spi, buf, len); 1006 if (status) { 1007 dev_warn( 1008 &spi->dev, 1009 "spi write failed, returned %d\n", 1010 status 1011 ); 1012 if (status == -EBUSY) 1013 continue; 1014 if (((buf[0] & SPI_SYN) && response)) 1015 complete(&priv->sync_exchange_complete); 1016 goto cleanup; 1017 } 1018 1019 wait_remaining = wait_for_completion_interruptible_timeout( 1020 &priv->spi_transfer_complete, 1021 msecs_to_jiffies(1000) 1022 ); 1023 if (wait_remaining == -ERESTARTSYS) { 1024 status = -ERESTARTSYS; 1025 } else if (wait_remaining == 0) { 1026 dev_err( 1027 &spi->dev, 1028 "SPI downstream transfer timed out!\n" 1029 ); 1030 status = -ETIME; 1031 goto cleanup; 1032 } 1033 } while (status < 0); 1034 1035 if (!((buf[0] & SPI_SYN) && response)) 1036 goto cleanup; 1037 1038 wait_remaining = wait_for_completion_interruptible_timeout( 1039 &priv->sync_exchange_complete, 1040 msecs_to_jiffies(CA8210_SYNC_TIMEOUT) 1041 ); 1042 if (wait_remaining == -ERESTARTSYS) { 1043 status = -ERESTARTSYS; 1044 } else if (wait_remaining == 0) { 1045 dev_err( 1046 &spi->dev, 1047 "Synchronous confirm timeout\n" 1048 ); 1049 status = -ETIME; 1050 } 1051 1052 cleanup: 1053 priv->sync_command_response = NULL; 1054 return status; 1055 } 1056 1057 /** 1058 * ca8210_interrupt_handler() - Called when an irq is received from the ca8210 1059 * @irq: Id of the irq being handled 1060 * @dev_id: Pointer passed by the system, pointing to the ca8210's private data 1061 * 1062 * This function is called when the irq line from the ca8210 is asserted, 1063 * signifying that the ca8210 has a message to send upstream to us. Starts the 1064 * asynchronous spi read. 1065 * 1066 * Return: irq return code 1067 */ 1068 static irqreturn_t ca8210_interrupt_handler(int irq, void *dev_id) 1069 { 1070 struct ca8210_priv *priv = dev_id; 1071 int status; 1072 1073 dev_dbg(&priv->spi->dev, "irq: Interrupt occurred\n"); 1074 do { 1075 status = ca8210_spi_transfer(priv->spi, NULL, 0); 1076 if (status && (status != -EBUSY)) { 1077 dev_warn( 1078 &priv->spi->dev, 1079 "spi read failed, returned %d\n", 1080 status 1081 ); 1082 } 1083 } while (status == -EBUSY); 1084 return IRQ_HANDLED; 1085 } 1086 1087 static int (*cascoda_api_downstream)( 1088 const u8 *buf, 1089 size_t len, 1090 u8 *response, 1091 void *device_ref 1092 ) = ca8210_spi_exchange; 1093 1094 /* Cascoda API / 15.4 SAP Primitives */ 1095 1096 /** 1097 * tdme_setsfr_request_sync() - TDME_SETSFR_request/confirm according to API 1098 * @sfr_page: SFR Page 1099 * @sfr_address: SFR Address 1100 * @sfr_value: SFR Value 1101 * @device_ref: Nondescript pointer to target device 1102 * 1103 * Return: 802.15.4 status code of TDME-SETSFR.confirm 1104 */ 1105 static u8 tdme_setsfr_request_sync( 1106 u8 sfr_page, 1107 u8 sfr_address, 1108 u8 sfr_value, 1109 void *device_ref 1110 ) 1111 { 1112 int ret; 1113 struct mac_message command, response; 1114 struct spi_device *spi = device_ref; 1115 1116 command.command_id = SPI_TDME_SETSFR_REQUEST; 1117 command.length = 3; 1118 command.pdata.tdme_set_sfr_req.sfr_page = sfr_page; 1119 command.pdata.tdme_set_sfr_req.sfr_address = sfr_address; 1120 command.pdata.tdme_set_sfr_req.sfr_value = sfr_value; 1121 response.command_id = SPI_IDLE; 1122 ret = cascoda_api_downstream( 1123 &command.command_id, 1124 command.length + 2, 1125 &response.command_id, 1126 device_ref 1127 ); 1128 if (ret) { 1129 dev_crit(&spi->dev, "cascoda_api_downstream returned %d", ret); 1130 return MAC_SYSTEM_ERROR; 1131 } 1132 1133 if (response.command_id != SPI_TDME_SETSFR_CONFIRM) { 1134 dev_crit( 1135 &spi->dev, 1136 "sync response to SPI_TDME_SETSFR_REQUEST was not SPI_TDME_SETSFR_CONFIRM, it was %d\n", 1137 response.command_id 1138 ); 1139 return MAC_SYSTEM_ERROR; 1140 } 1141 1142 return response.pdata.tdme_set_sfr_cnf.status; 1143 } 1144 1145 /** 1146 * tdme_chipinit() - TDME Chip Register Default Initialisation Macro 1147 * @device_ref: Nondescript pointer to target device 1148 * 1149 * Return: 802.15.4 status code of API calls 1150 */ 1151 static u8 tdme_chipinit(void *device_ref) 1152 { 1153 u8 status = MAC_SUCCESS; 1154 u8 sfr_address; 1155 struct spi_device *spi = device_ref; 1156 struct preamble_cfg_sfr pre_cfg_value = { 1157 .timeout_symbols = 3, 1158 .acquisition_symbols = 3, 1159 .search_symbols = 1, 1160 }; 1161 /* LNA Gain Settings */ 1162 status = tdme_setsfr_request_sync( 1163 1, (sfr_address = CA8210_SFR_LNAGX40), 1164 LNAGX40_DEFAULT_GAIN, device_ref); 1165 if (status) 1166 goto finish; 1167 status = tdme_setsfr_request_sync( 1168 1, (sfr_address = CA8210_SFR_LNAGX41), 1169 LNAGX41_DEFAULT_GAIN, device_ref); 1170 if (status) 1171 goto finish; 1172 status = tdme_setsfr_request_sync( 1173 1, (sfr_address = CA8210_SFR_LNAGX42), 1174 LNAGX42_DEFAULT_GAIN, device_ref); 1175 if (status) 1176 goto finish; 1177 status = tdme_setsfr_request_sync( 1178 1, (sfr_address = CA8210_SFR_LNAGX43), 1179 LNAGX43_DEFAULT_GAIN, device_ref); 1180 if (status) 1181 goto finish; 1182 status = tdme_setsfr_request_sync( 1183 1, (sfr_address = CA8210_SFR_LNAGX44), 1184 LNAGX44_DEFAULT_GAIN, device_ref); 1185 if (status) 1186 goto finish; 1187 status = tdme_setsfr_request_sync( 1188 1, (sfr_address = CA8210_SFR_LNAGX45), 1189 LNAGX45_DEFAULT_GAIN, device_ref); 1190 if (status) 1191 goto finish; 1192 status = tdme_setsfr_request_sync( 1193 1, (sfr_address = CA8210_SFR_LNAGX46), 1194 LNAGX46_DEFAULT_GAIN, device_ref); 1195 if (status) 1196 goto finish; 1197 status = tdme_setsfr_request_sync( 1198 1, (sfr_address = CA8210_SFR_LNAGX47), 1199 LNAGX47_DEFAULT_GAIN, device_ref); 1200 if (status) 1201 goto finish; 1202 /* Preamble Timing Config */ 1203 status = tdme_setsfr_request_sync( 1204 1, (sfr_address = CA8210_SFR_PRECFG), 1205 *((u8 *)&pre_cfg_value), device_ref); 1206 if (status) 1207 goto finish; 1208 /* Preamble Threshold High */ 1209 status = tdme_setsfr_request_sync( 1210 1, (sfr_address = CA8210_SFR_PTHRH), 1211 PTHRH_DEFAULT_THRESHOLD, device_ref); 1212 if (status) 1213 goto finish; 1214 /* Tx Output Power 8 dBm */ 1215 status = tdme_setsfr_request_sync( 1216 0, (sfr_address = CA8210_SFR_PACFGIB), 1217 PACFGIB_DEFAULT_CURRENT, device_ref); 1218 if (status) 1219 goto finish; 1220 1221 finish: 1222 if (status != MAC_SUCCESS) { 1223 dev_err( 1224 &spi->dev, 1225 "failed to set sfr at %#03x, status = %#03x\n", 1226 sfr_address, 1227 status 1228 ); 1229 } 1230 return status; 1231 } 1232 1233 /** 1234 * tdme_channelinit() - TDME Channel Register Default Initialisation Macro (Tx) 1235 * @channel: 802.15.4 channel to initialise chip for 1236 * @device_ref: Nondescript pointer to target device 1237 * 1238 * Return: 802.15.4 status code of API calls 1239 */ 1240 static u8 tdme_channelinit(u8 channel, void *device_ref) 1241 { 1242 /* Transceiver front-end local oscillator tx two-point calibration 1243 * value. Tuned for the hardware. 1244 */ 1245 u8 txcalval; 1246 1247 if (channel >= 25) 1248 txcalval = 0xA7; 1249 else if (channel >= 23) 1250 txcalval = 0xA8; 1251 else if (channel >= 22) 1252 txcalval = 0xA9; 1253 else if (channel >= 20) 1254 txcalval = 0xAA; 1255 else if (channel >= 17) 1256 txcalval = 0xAB; 1257 else if (channel >= 16) 1258 txcalval = 0xAC; 1259 else if (channel >= 14) 1260 txcalval = 0xAD; 1261 else if (channel >= 12) 1262 txcalval = 0xAE; 1263 else 1264 txcalval = 0xAF; 1265 1266 return tdme_setsfr_request_sync( 1267 1, 1268 CA8210_SFR_LOTXCAL, 1269 txcalval, 1270 device_ref 1271 ); /* LO Tx Cal */ 1272 } 1273 1274 /** 1275 * tdme_checkpibattribute() - Checks Attribute Values that are not checked in 1276 * MAC 1277 * @pib_attribute: Attribute Number 1278 * @pib_attribute_length: Attribute length 1279 * @pib_attribute_value: Pointer to Attribute Value 1280 * @device_ref: Nondescript pointer to target device 1281 * 1282 * Return: 802.15.4 status code of checks 1283 */ 1284 static u8 tdme_checkpibattribute( 1285 u8 pib_attribute, 1286 u8 pib_attribute_length, 1287 const void *pib_attribute_value 1288 ) 1289 { 1290 u8 status = MAC_SUCCESS; 1291 u8 value; 1292 1293 value = *((u8 *)pib_attribute_value); 1294 1295 switch (pib_attribute) { 1296 /* PHY */ 1297 case PHY_TRANSMIT_POWER: 1298 if (value > 0x3F) 1299 status = MAC_INVALID_PARAMETER; 1300 break; 1301 case PHY_CCA_MODE: 1302 if (value > 0x03) 1303 status = MAC_INVALID_PARAMETER; 1304 break; 1305 /* MAC */ 1306 case MAC_BATT_LIFE_EXT_PERIODS: 1307 if (value < 6 || value > 41) 1308 status = MAC_INVALID_PARAMETER; 1309 break; 1310 case MAC_BEACON_PAYLOAD: 1311 if (pib_attribute_length > MAX_BEACON_PAYLOAD_LENGTH) 1312 status = MAC_INVALID_PARAMETER; 1313 break; 1314 case MAC_BEACON_PAYLOAD_LENGTH: 1315 if (value > MAX_BEACON_PAYLOAD_LENGTH) 1316 status = MAC_INVALID_PARAMETER; 1317 break; 1318 case MAC_BEACON_ORDER: 1319 if (value > 15) 1320 status = MAC_INVALID_PARAMETER; 1321 break; 1322 case MAC_MAX_BE: 1323 if (value < 3 || value > 8) 1324 status = MAC_INVALID_PARAMETER; 1325 break; 1326 case MAC_MAX_CSMA_BACKOFFS: 1327 if (value > 5) 1328 status = MAC_INVALID_PARAMETER; 1329 break; 1330 case MAC_MAX_FRAME_RETRIES: 1331 if (value > 7) 1332 status = MAC_INVALID_PARAMETER; 1333 break; 1334 case MAC_MIN_BE: 1335 if (value > 8) 1336 status = MAC_INVALID_PARAMETER; 1337 break; 1338 case MAC_RESPONSE_WAIT_TIME: 1339 if (value < 2 || value > 64) 1340 status = MAC_INVALID_PARAMETER; 1341 break; 1342 case MAC_SUPERFRAME_ORDER: 1343 if (value > 15) 1344 status = MAC_INVALID_PARAMETER; 1345 break; 1346 /* boolean */ 1347 case MAC_ASSOCIATED_PAN_COORD: 1348 case MAC_ASSOCIATION_PERMIT: 1349 case MAC_AUTO_REQUEST: 1350 case MAC_BATT_LIFE_EXT: 1351 case MAC_GTS_PERMIT: 1352 case MAC_PROMISCUOUS_MODE: 1353 case MAC_RX_ON_WHEN_IDLE: 1354 case MAC_SECURITY_ENABLED: 1355 if (value > 1) 1356 status = MAC_INVALID_PARAMETER; 1357 break; 1358 /* MAC SEC */ 1359 case MAC_AUTO_REQUEST_SECURITY_LEVEL: 1360 if (value > 7) 1361 status = MAC_INVALID_PARAMETER; 1362 break; 1363 case MAC_AUTO_REQUEST_KEY_ID_MODE: 1364 if (value > 3) 1365 status = MAC_INVALID_PARAMETER; 1366 break; 1367 default: 1368 break; 1369 } 1370 1371 return status; 1372 } 1373 1374 /** 1375 * tdme_settxpower() - Sets the tx power for MLME_SET phyTransmitPower 1376 * @txp: Transmit Power 1377 * @device_ref: Nondescript pointer to target device 1378 * 1379 * Normalised to 802.15.4 Definition (6-bit, signed): 1380 * Bit 7-6: not used 1381 * Bit 5-0: tx power (-32 - +31 dB) 1382 * 1383 * Return: 802.15.4 status code of api calls 1384 */ 1385 static u8 tdme_settxpower(u8 txp, void *device_ref) 1386 { 1387 u8 status; 1388 s8 txp_val; 1389 u8 txp_ext; 1390 union pa_cfg_sfr pa_cfg_val; 1391 1392 /* extend from 6 to 8 bit */ 1393 txp_ext = 0x3F & txp; 1394 if (txp_ext & 0x20) 1395 txp_ext += 0xC0; 1396 txp_val = (s8)txp_ext; 1397 1398 if (CA8210_MAC_MPW) { 1399 if (txp_val > 0) { 1400 /* 8 dBm: ptrim = 5, itrim = +3 => +4 dBm */ 1401 pa_cfg_val.bias_current_trim = 3; 1402 pa_cfg_val.buffer_capacitor_trim = 5; 1403 pa_cfg_val.boost = 1; 1404 } else { 1405 /* 0 dBm: ptrim = 7, itrim = +3 => -6 dBm */ 1406 pa_cfg_val.bias_current_trim = 3; 1407 pa_cfg_val.buffer_capacitor_trim = 7; 1408 pa_cfg_val.boost = 0; 1409 } 1410 /* write PACFG */ 1411 status = tdme_setsfr_request_sync( 1412 0, 1413 CA8210_SFR_PACFG, 1414 pa_cfg_val.paib, 1415 device_ref 1416 ); 1417 } else { 1418 /* Look-Up Table for Setting Current and Frequency Trim values 1419 * for desired Output Power 1420 */ 1421 if (txp_val > 8) { 1422 pa_cfg_val.paib = 0x3F; 1423 } else if (txp_val == 8) { 1424 pa_cfg_val.paib = 0x32; 1425 } else if (txp_val == 7) { 1426 pa_cfg_val.paib = 0x22; 1427 } else if (txp_val == 6) { 1428 pa_cfg_val.paib = 0x18; 1429 } else if (txp_val == 5) { 1430 pa_cfg_val.paib = 0x10; 1431 } else if (txp_val == 4) { 1432 pa_cfg_val.paib = 0x0C; 1433 } else if (txp_val == 3) { 1434 pa_cfg_val.paib = 0x08; 1435 } else if (txp_val == 2) { 1436 pa_cfg_val.paib = 0x05; 1437 } else if (txp_val == 1) { 1438 pa_cfg_val.paib = 0x03; 1439 } else if (txp_val == 0) { 1440 pa_cfg_val.paib = 0x01; 1441 } else { /* < 0 */ 1442 pa_cfg_val.paib = 0x00; 1443 } 1444 /* write PACFGIB */ 1445 status = tdme_setsfr_request_sync( 1446 0, 1447 CA8210_SFR_PACFGIB, 1448 pa_cfg_val.paib, 1449 device_ref 1450 ); 1451 } 1452 1453 return status; 1454 } 1455 1456 /** 1457 * mcps_data_request() - mcps_data_request (Send Data) according to API Spec 1458 * @src_addr_mode: Source Addressing Mode 1459 * @dst_address_mode: Destination Addressing Mode 1460 * @dst_pan_id: Destination PAN ID 1461 * @dst_addr: Pointer to Destination Address 1462 * @msdu_length: length of Data 1463 * @msdu: Pointer to Data 1464 * @msdu_handle: Handle of Data 1465 * @tx_options: Tx Options Bit Field 1466 * @security: Pointer to Security Structure or NULL 1467 * @device_ref: Nondescript pointer to target device 1468 * 1469 * Return: 802.15.4 status code of action 1470 */ 1471 static u8 mcps_data_request( 1472 u8 src_addr_mode, 1473 u8 dst_address_mode, 1474 u16 dst_pan_id, 1475 union macaddr *dst_addr, 1476 u8 msdu_length, 1477 u8 *msdu, 1478 u8 msdu_handle, 1479 u8 tx_options, 1480 struct secspec *security, 1481 void *device_ref 1482 ) 1483 { 1484 struct secspec *psec; 1485 struct mac_message command; 1486 1487 command.command_id = SPI_MCPS_DATA_REQUEST; 1488 command.pdata.data_req.src_addr_mode = src_addr_mode; 1489 command.pdata.data_req.dst.mode = dst_address_mode; 1490 if (dst_address_mode != MAC_MODE_NO_ADDR) { 1491 command.pdata.data_req.dst.pan_id[0] = LS_BYTE(dst_pan_id); 1492 command.pdata.data_req.dst.pan_id[1] = MS_BYTE(dst_pan_id); 1493 if (dst_address_mode == MAC_MODE_SHORT_ADDR) { 1494 command.pdata.data_req.dst.address[0] = LS_BYTE( 1495 dst_addr->short_address 1496 ); 1497 command.pdata.data_req.dst.address[1] = MS_BYTE( 1498 dst_addr->short_address 1499 ); 1500 } else { /* MAC_MODE_LONG_ADDR*/ 1501 memcpy( 1502 command.pdata.data_req.dst.address, 1503 dst_addr->ieee_address, 1504 8 1505 ); 1506 } 1507 } 1508 command.pdata.data_req.msdu_length = msdu_length; 1509 command.pdata.data_req.msdu_handle = msdu_handle; 1510 command.pdata.data_req.tx_options = tx_options; 1511 memcpy(command.pdata.data_req.msdu, msdu, msdu_length); 1512 psec = (struct secspec *)(command.pdata.data_req.msdu + msdu_length); 1513 command.length = sizeof(struct mcps_data_request_pset) - 1514 MAX_DATA_SIZE + msdu_length; 1515 if (!security || security->security_level == 0) { 1516 psec->security_level = 0; 1517 command.length += 1; 1518 } else { 1519 *psec = *security; 1520 command.length += sizeof(struct secspec); 1521 } 1522 1523 if (ca8210_spi_transfer(device_ref, &command.command_id, 1524 command.length + 2)) 1525 return MAC_SYSTEM_ERROR; 1526 1527 return MAC_SUCCESS; 1528 } 1529 1530 /** 1531 * mlme_reset_request_sync() - MLME_RESET_request/confirm according to API Spec 1532 * @set_default_pib: Set defaults in PIB 1533 * @device_ref: Nondescript pointer to target device 1534 * 1535 * Return: 802.15.4 status code of MLME-RESET.confirm 1536 */ 1537 static u8 mlme_reset_request_sync( 1538 u8 set_default_pib, 1539 void *device_ref 1540 ) 1541 { 1542 u8 status; 1543 struct mac_message command, response; 1544 struct spi_device *spi = device_ref; 1545 1546 command.command_id = SPI_MLME_RESET_REQUEST; 1547 command.length = 1; 1548 command.pdata.u8param = set_default_pib; 1549 1550 if (cascoda_api_downstream( 1551 &command.command_id, 1552 command.length + 2, 1553 &response.command_id, 1554 device_ref)) { 1555 dev_err(&spi->dev, "cascoda_api_downstream failed\n"); 1556 return MAC_SYSTEM_ERROR; 1557 } 1558 1559 if (response.command_id != SPI_MLME_RESET_CONFIRM) 1560 return MAC_SYSTEM_ERROR; 1561 1562 status = response.pdata.status; 1563 1564 /* reset COORD Bit for Channel Filtering as Coordinator */ 1565 if (CA8210_MAC_WORKAROUNDS && set_default_pib && !status) { 1566 status = tdme_setsfr_request_sync( 1567 0, 1568 CA8210_SFR_MACCON, 1569 0, 1570 device_ref 1571 ); 1572 } 1573 1574 return status; 1575 } 1576 1577 /** 1578 * mlme_set_request_sync() - MLME_SET_request/confirm according to API Spec 1579 * @pib_attribute: Attribute Number 1580 * @pib_attribute_index: Index within Attribute if an Array 1581 * @pib_attribute_length: Attribute length 1582 * @pib_attribute_value: Pointer to Attribute Value 1583 * @device_ref: Nondescript pointer to target device 1584 * 1585 * Return: 802.15.4 status code of MLME-SET.confirm 1586 */ 1587 static u8 mlme_set_request_sync( 1588 u8 pib_attribute, 1589 u8 pib_attribute_index, 1590 u8 pib_attribute_length, 1591 const void *pib_attribute_value, 1592 void *device_ref 1593 ) 1594 { 1595 u8 status; 1596 struct mac_message command, response; 1597 1598 /* pre-check the validity of pib_attribute values that are not checked 1599 * in MAC 1600 */ 1601 if (tdme_checkpibattribute( 1602 pib_attribute, pib_attribute_length, pib_attribute_value)) { 1603 return MAC_INVALID_PARAMETER; 1604 } 1605 1606 if (pib_attribute == PHY_CURRENT_CHANNEL) { 1607 status = tdme_channelinit( 1608 *((u8 *)pib_attribute_value), 1609 device_ref 1610 ); 1611 if (status) 1612 return status; 1613 } 1614 1615 if (pib_attribute == PHY_TRANSMIT_POWER) { 1616 return tdme_settxpower( 1617 *((u8 *)pib_attribute_value), 1618 device_ref 1619 ); 1620 } 1621 1622 command.command_id = SPI_MLME_SET_REQUEST; 1623 command.length = sizeof(struct mlme_set_request_pset) - 1624 MAX_ATTRIBUTE_SIZE + pib_attribute_length; 1625 command.pdata.set_req.pib_attribute = pib_attribute; 1626 command.pdata.set_req.pib_attribute_index = pib_attribute_index; 1627 command.pdata.set_req.pib_attribute_length = pib_attribute_length; 1628 memcpy( 1629 command.pdata.set_req.pib_attribute_value, 1630 pib_attribute_value, 1631 pib_attribute_length 1632 ); 1633 1634 if (cascoda_api_downstream( 1635 &command.command_id, 1636 command.length + 2, 1637 &response.command_id, 1638 device_ref)) { 1639 return MAC_SYSTEM_ERROR; 1640 } 1641 1642 if (response.command_id != SPI_MLME_SET_CONFIRM) 1643 return MAC_SYSTEM_ERROR; 1644 1645 return response.pdata.status; 1646 } 1647 1648 /** 1649 * hwme_set_request_sync() - HWME_SET_request/confirm according to API Spec 1650 * @hw_attribute: Attribute Number 1651 * @hw_attribute_length: Attribute length 1652 * @hw_attribute_value: Pointer to Attribute Value 1653 * @device_ref: Nondescript pointer to target device 1654 * 1655 * Return: 802.15.4 status code of HWME-SET.confirm 1656 */ 1657 static u8 hwme_set_request_sync( 1658 u8 hw_attribute, 1659 u8 hw_attribute_length, 1660 u8 *hw_attribute_value, 1661 void *device_ref 1662 ) 1663 { 1664 struct mac_message command, response; 1665 1666 command.command_id = SPI_HWME_SET_REQUEST; 1667 command.length = 2 + hw_attribute_length; 1668 command.pdata.hwme_set_req.hw_attribute = hw_attribute; 1669 command.pdata.hwme_set_req.hw_attribute_length = hw_attribute_length; 1670 memcpy( 1671 command.pdata.hwme_set_req.hw_attribute_value, 1672 hw_attribute_value, 1673 hw_attribute_length 1674 ); 1675 1676 if (cascoda_api_downstream( 1677 &command.command_id, 1678 command.length + 2, 1679 &response.command_id, 1680 device_ref)) { 1681 return MAC_SYSTEM_ERROR; 1682 } 1683 1684 if (response.command_id != SPI_HWME_SET_CONFIRM) 1685 return MAC_SYSTEM_ERROR; 1686 1687 return response.pdata.hwme_set_cnf.status; 1688 } 1689 1690 /** 1691 * hwme_get_request_sync() - HWME_GET_request/confirm according to API Spec 1692 * @hw_attribute: Attribute Number 1693 * @hw_attribute_length: Attribute length 1694 * @hw_attribute_value: Pointer to Attribute Value 1695 * @device_ref: Nondescript pointer to target device 1696 * 1697 * Return: 802.15.4 status code of HWME-GET.confirm 1698 */ 1699 static u8 hwme_get_request_sync( 1700 u8 hw_attribute, 1701 u8 *hw_attribute_length, 1702 u8 *hw_attribute_value, 1703 void *device_ref 1704 ) 1705 { 1706 struct mac_message command, response; 1707 1708 command.command_id = SPI_HWME_GET_REQUEST; 1709 command.length = 1; 1710 command.pdata.hwme_get_req.hw_attribute = hw_attribute; 1711 1712 if (cascoda_api_downstream( 1713 &command.command_id, 1714 command.length + 2, 1715 &response.command_id, 1716 device_ref)) { 1717 return MAC_SYSTEM_ERROR; 1718 } 1719 1720 if (response.command_id != SPI_HWME_GET_CONFIRM) 1721 return MAC_SYSTEM_ERROR; 1722 1723 if (response.pdata.hwme_get_cnf.status == MAC_SUCCESS) { 1724 *hw_attribute_length = 1725 response.pdata.hwme_get_cnf.hw_attribute_length; 1726 memcpy( 1727 hw_attribute_value, 1728 response.pdata.hwme_get_cnf.hw_attribute_value, 1729 *hw_attribute_length 1730 ); 1731 } 1732 1733 return response.pdata.hwme_get_cnf.status; 1734 } 1735 1736 /* Network driver operation */ 1737 1738 /** 1739 * ca8210_async_xmit_complete() - Called to announce that an asynchronous 1740 * transmission has finished 1741 * @hw: ieee802154_hw of ca8210 that has finished exchange 1742 * @msduhandle: Identifier of transmission that has completed 1743 * @status: Returned 802.15.4 status code of the transmission 1744 * 1745 * Return: 0 or linux error code 1746 */ 1747 static int ca8210_async_xmit_complete( 1748 struct ieee802154_hw *hw, 1749 u8 msduhandle, 1750 u8 status) 1751 { 1752 struct ca8210_priv *priv = hw->priv; 1753 1754 if (priv->nextmsduhandle != msduhandle) { 1755 dev_err( 1756 &priv->spi->dev, 1757 "Unexpected msdu_handle on data confirm, Expected %d, got %d\n", 1758 priv->nextmsduhandle, 1759 msduhandle 1760 ); 1761 return -EIO; 1762 } 1763 1764 priv->async_tx_pending = false; 1765 priv->nextmsduhandle++; 1766 1767 if (status) { 1768 dev_err( 1769 &priv->spi->dev, 1770 "Link transmission unsuccessful, status = %d\n", 1771 status 1772 ); 1773 if (status != MAC_TRANSACTION_OVERFLOW) { 1774 ieee802154_wake_queue(priv->hw); 1775 return 0; 1776 } 1777 } 1778 ieee802154_xmit_complete(priv->hw, priv->tx_skb, true); 1779 1780 return 0; 1781 } 1782 1783 /** 1784 * ca8210_skb_rx() - Contructs a properly framed socket buffer from a received 1785 * MCPS_DATA_indication 1786 * @hw: ieee802154_hw that MCPS_DATA_indication was received by 1787 * @len: length of MCPS_DATA_indication 1788 * @data_ind: Octet array of MCPS_DATA_indication 1789 * 1790 * Called by the spi driver whenever a SAP command is received, this function 1791 * will ascertain whether the command is of interest to the network driver and 1792 * take necessary action. 1793 * 1794 * Return: 0 or linux error code 1795 */ 1796 static int ca8210_skb_rx( 1797 struct ieee802154_hw *hw, 1798 size_t len, 1799 u8 *data_ind 1800 ) 1801 { 1802 struct ieee802154_hdr hdr; 1803 int msdulen; 1804 int hlen; 1805 u8 mpdulinkquality = data_ind[23]; 1806 struct sk_buff *skb; 1807 struct ca8210_priv *priv = hw->priv; 1808 1809 /* Allocate mtu size buffer for every rx packet */ 1810 skb = dev_alloc_skb(IEEE802154_MTU + sizeof(hdr)); 1811 if (!skb) 1812 return -ENOMEM; 1813 1814 skb_reserve(skb, sizeof(hdr)); 1815 1816 msdulen = data_ind[22]; /* msdu_length */ 1817 if (msdulen > IEEE802154_MTU) { 1818 dev_err( 1819 &priv->spi->dev, 1820 "received erroneously large msdu length!\n" 1821 ); 1822 kfree_skb(skb); 1823 return -EMSGSIZE; 1824 } 1825 dev_dbg(&priv->spi->dev, "skb buffer length = %d\n", msdulen); 1826 1827 if (priv->promiscuous) 1828 goto copy_payload; 1829 1830 /* Populate hdr */ 1831 hdr.sec.level = data_ind[29 + msdulen]; 1832 dev_dbg(&priv->spi->dev, "security level: %#03x\n", hdr.sec.level); 1833 if (hdr.sec.level > 0) { 1834 hdr.sec.key_id_mode = data_ind[30 + msdulen]; 1835 memcpy(&hdr.sec.extended_src, &data_ind[31 + msdulen], 8); 1836 hdr.sec.key_id = data_ind[39 + msdulen]; 1837 } 1838 hdr.source.mode = data_ind[0]; 1839 dev_dbg(&priv->spi->dev, "srcAddrMode: %#03x\n", hdr.source.mode); 1840 hdr.source.pan_id = *(u16 *)&data_ind[1]; 1841 dev_dbg(&priv->spi->dev, "srcPanId: %#06x\n", hdr.source.pan_id); 1842 memcpy(&hdr.source.extended_addr, &data_ind[3], 8); 1843 hdr.dest.mode = data_ind[11]; 1844 dev_dbg(&priv->spi->dev, "dstAddrMode: %#03x\n", hdr.dest.mode); 1845 hdr.dest.pan_id = *(u16 *)&data_ind[12]; 1846 dev_dbg(&priv->spi->dev, "dstPanId: %#06x\n", hdr.dest.pan_id); 1847 memcpy(&hdr.dest.extended_addr, &data_ind[14], 8); 1848 1849 /* Fill in FC implicitly */ 1850 hdr.fc.type = 1; /* Data frame */ 1851 if (hdr.sec.level) 1852 hdr.fc.security_enabled = 1; 1853 else 1854 hdr.fc.security_enabled = 0; 1855 if (data_ind[1] != data_ind[12] || data_ind[2] != data_ind[13]) 1856 hdr.fc.intra_pan = 1; 1857 else 1858 hdr.fc.intra_pan = 0; 1859 hdr.fc.dest_addr_mode = hdr.dest.mode; 1860 hdr.fc.source_addr_mode = hdr.source.mode; 1861 1862 /* Add hdr to front of buffer */ 1863 hlen = ieee802154_hdr_push(skb, &hdr); 1864 1865 if (hlen < 0) { 1866 dev_crit(&priv->spi->dev, "failed to push mac hdr onto skb!\n"); 1867 kfree_skb(skb); 1868 return hlen; 1869 } 1870 1871 skb_reset_mac_header(skb); 1872 skb->mac_len = hlen; 1873 1874 copy_payload: 1875 /* Add <msdulen> bytes of space to the back of the buffer */ 1876 /* Copy msdu to skb */ 1877 skb_put_data(skb, &data_ind[29], msdulen); 1878 1879 ieee802154_rx_irqsafe(hw, skb, mpdulinkquality); 1880 return 0; 1881 } 1882 1883 /** 1884 * ca8210_net_rx() - Acts upon received SAP commands relevant to the network 1885 * driver 1886 * @hw: ieee802154_hw that command was received by 1887 * @command: Octet array of received command 1888 * @len: length of the received command 1889 * 1890 * Called by the spi driver whenever a SAP command is received, this function 1891 * will ascertain whether the command is of interest to the network driver and 1892 * take necessary action. 1893 * 1894 * Return: 0 or linux error code 1895 */ 1896 static int ca8210_net_rx(struct ieee802154_hw *hw, u8 *command, size_t len) 1897 { 1898 struct ca8210_priv *priv = hw->priv; 1899 unsigned long flags; 1900 u8 status; 1901 1902 dev_dbg(&priv->spi->dev, "%s: CmdID = %d\n", __func__, command[0]); 1903 1904 if (command[0] == SPI_MCPS_DATA_INDICATION) { 1905 /* Received data */ 1906 spin_lock_irqsave(&priv->lock, flags); 1907 if (command[26] == priv->last_dsn) { 1908 dev_dbg( 1909 &priv->spi->dev, 1910 "DSN %d resend received, ignoring...\n", 1911 command[26] 1912 ); 1913 spin_unlock_irqrestore(&priv->lock, flags); 1914 return 0; 1915 } 1916 priv->last_dsn = command[26]; 1917 spin_unlock_irqrestore(&priv->lock, flags); 1918 return ca8210_skb_rx(hw, len - 2, command + 2); 1919 } else if (command[0] == SPI_MCPS_DATA_CONFIRM) { 1920 status = command[3]; 1921 if (priv->async_tx_pending) { 1922 return ca8210_async_xmit_complete( 1923 hw, 1924 command[2], 1925 status 1926 ); 1927 } 1928 } 1929 1930 return 0; 1931 } 1932 1933 /** 1934 * ca8210_skb_tx() - Transmits a given socket buffer using the ca8210 1935 * @skb: Socket buffer to transmit 1936 * @msduhandle: Data identifier to pass to the 802.15.4 MAC 1937 * @priv: Pointer to private data section of target ca8210 1938 * 1939 * Return: 0 or linux error code 1940 */ 1941 static int ca8210_skb_tx( 1942 struct sk_buff *skb, 1943 u8 msduhandle, 1944 struct ca8210_priv *priv 1945 ) 1946 { 1947 int status; 1948 struct ieee802154_hdr header = { }; 1949 struct secspec secspec; 1950 unsigned int mac_len; 1951 1952 dev_dbg(&priv->spi->dev, "%s called\n", __func__); 1953 1954 /* Get addressing info from skb - ieee802154 layer creates a full 1955 * packet 1956 */ 1957 mac_len = ieee802154_hdr_peek_addrs(skb, &header); 1958 1959 secspec.security_level = header.sec.level; 1960 secspec.key_id_mode = header.sec.key_id_mode; 1961 if (secspec.key_id_mode == 2) 1962 memcpy(secspec.key_source, &header.sec.short_src, 4); 1963 else if (secspec.key_id_mode == 3) 1964 memcpy(secspec.key_source, &header.sec.extended_src, 8); 1965 secspec.key_index = header.sec.key_id; 1966 1967 /* Pass to Cascoda API */ 1968 status = mcps_data_request( 1969 header.source.mode, 1970 header.dest.mode, 1971 header.dest.pan_id, 1972 (union macaddr *)&header.dest.extended_addr, 1973 skb->len - mac_len, 1974 &skb->data[mac_len], 1975 msduhandle, 1976 header.fc.ack_request, 1977 &secspec, 1978 priv->spi 1979 ); 1980 return link_to_linux_err(status); 1981 } 1982 1983 /** 1984 * ca8210_start() - Starts the network driver 1985 * @hw: ieee802154_hw of ca8210 being started 1986 * 1987 * Return: 0 or linux error code 1988 */ 1989 static int ca8210_start(struct ieee802154_hw *hw) 1990 { 1991 int status; 1992 u8 rx_on_when_idle; 1993 u8 lqi_threshold = 0; 1994 struct ca8210_priv *priv = hw->priv; 1995 1996 priv->last_dsn = -1; 1997 /* Turn receiver on when idle for now just to test rx */ 1998 rx_on_when_idle = 1; 1999 status = mlme_set_request_sync( 2000 MAC_RX_ON_WHEN_IDLE, 2001 0, 2002 1, 2003 &rx_on_when_idle, 2004 priv->spi 2005 ); 2006 if (status) { 2007 dev_crit( 2008 &priv->spi->dev, 2009 "Setting rx_on_when_idle failed, status = %d\n", 2010 status 2011 ); 2012 return link_to_linux_err(status); 2013 } 2014 status = hwme_set_request_sync( 2015 HWME_LQILIMIT, 2016 1, 2017 &lqi_threshold, 2018 priv->spi 2019 ); 2020 if (status) { 2021 dev_crit( 2022 &priv->spi->dev, 2023 "Setting lqilimit failed, status = %d\n", 2024 status 2025 ); 2026 return link_to_linux_err(status); 2027 } 2028 2029 return 0; 2030 } 2031 2032 /** 2033 * ca8210_stop() - Stops the network driver 2034 * @hw: ieee802154_hw of ca8210 being stopped 2035 * 2036 * Return: 0 or linux error code 2037 */ 2038 static void ca8210_stop(struct ieee802154_hw *hw) 2039 { 2040 } 2041 2042 /** 2043 * ca8210_xmit_async() - Asynchronously transmits a given socket buffer using 2044 * the ca8210 2045 * @hw: ieee802154_hw of ca8210 to transmit from 2046 * @skb: Socket buffer to transmit 2047 * 2048 * Return: 0 or linux error code 2049 */ 2050 static int ca8210_xmit_async(struct ieee802154_hw *hw, struct sk_buff *skb) 2051 { 2052 struct ca8210_priv *priv = hw->priv; 2053 int status; 2054 2055 dev_dbg(&priv->spi->dev, "calling %s\n", __func__); 2056 2057 priv->tx_skb = skb; 2058 priv->async_tx_pending = true; 2059 status = ca8210_skb_tx(skb, priv->nextmsduhandle, priv); 2060 return status; 2061 } 2062 2063 /** 2064 * ca8210_get_ed() - Returns the measured energy on the current channel at this 2065 * instant in time 2066 * @hw: ieee802154_hw of target ca8210 2067 * @level: Measured Energy Detect level 2068 * 2069 * Return: 0 or linux error code 2070 */ 2071 static int ca8210_get_ed(struct ieee802154_hw *hw, u8 *level) 2072 { 2073 u8 lenvar; 2074 struct ca8210_priv *priv = hw->priv; 2075 2076 return link_to_linux_err( 2077 hwme_get_request_sync(HWME_EDVALUE, &lenvar, level, priv->spi) 2078 ); 2079 } 2080 2081 /** 2082 * ca8210_set_channel() - Sets the current operating 802.15.4 channel of the 2083 * ca8210 2084 * @hw: ieee802154_hw of target ca8210 2085 * @page: Channel page to set 2086 * @channel: Channel number to set 2087 * 2088 * Return: 0 or linux error code 2089 */ 2090 static int ca8210_set_channel( 2091 struct ieee802154_hw *hw, 2092 u8 page, 2093 u8 channel 2094 ) 2095 { 2096 u8 status; 2097 struct ca8210_priv *priv = hw->priv; 2098 2099 status = mlme_set_request_sync( 2100 PHY_CURRENT_CHANNEL, 2101 0, 2102 1, 2103 &channel, 2104 priv->spi 2105 ); 2106 if (status) { 2107 dev_err( 2108 &priv->spi->dev, 2109 "error setting channel, MLME-SET.confirm status = %d\n", 2110 status 2111 ); 2112 } 2113 return link_to_linux_err(status); 2114 } 2115 2116 /** 2117 * ca8210_set_hw_addr_filt() - Sets the address filtering parameters of the 2118 * ca8210 2119 * @hw: ieee802154_hw of target ca8210 2120 * @filt: Filtering parameters 2121 * @changed: Bitmap representing which parameters to change 2122 * 2123 * Effectively just sets the actual addressing information identifying this node 2124 * as all filtering is performed by the ca8210 as detailed in the IEEE 802.15.4 2125 * 2006 specification. 2126 * 2127 * Return: 0 or linux error code 2128 */ 2129 static int ca8210_set_hw_addr_filt( 2130 struct ieee802154_hw *hw, 2131 struct ieee802154_hw_addr_filt *filt, 2132 unsigned long changed 2133 ) 2134 { 2135 u8 status = 0; 2136 struct ca8210_priv *priv = hw->priv; 2137 2138 if (changed & IEEE802154_AFILT_PANID_CHANGED) { 2139 status = mlme_set_request_sync( 2140 MAC_PAN_ID, 2141 0, 2142 2, 2143 &filt->pan_id, priv->spi 2144 ); 2145 if (status) { 2146 dev_err( 2147 &priv->spi->dev, 2148 "error setting pan id, MLME-SET.confirm status = %d", 2149 status 2150 ); 2151 return link_to_linux_err(status); 2152 } 2153 } 2154 if (changed & IEEE802154_AFILT_SADDR_CHANGED) { 2155 status = mlme_set_request_sync( 2156 MAC_SHORT_ADDRESS, 2157 0, 2158 2, 2159 &filt->short_addr, priv->spi 2160 ); 2161 if (status) { 2162 dev_err( 2163 &priv->spi->dev, 2164 "error setting short address, MLME-SET.confirm status = %d", 2165 status 2166 ); 2167 return link_to_linux_err(status); 2168 } 2169 } 2170 if (changed & IEEE802154_AFILT_IEEEADDR_CHANGED) { 2171 status = mlme_set_request_sync( 2172 NS_IEEE_ADDRESS, 2173 0, 2174 8, 2175 &filt->ieee_addr, 2176 priv->spi 2177 ); 2178 if (status) { 2179 dev_err( 2180 &priv->spi->dev, 2181 "error setting ieee address, MLME-SET.confirm status = %d", 2182 status 2183 ); 2184 return link_to_linux_err(status); 2185 } 2186 } 2187 /* TODO: Should use MLME_START to set coord bit? */ 2188 return 0; 2189 } 2190 2191 /** 2192 * ca8210_set_tx_power() - Sets the transmit power of the ca8210 2193 * @hw: ieee802154_hw of target ca8210 2194 * @mbm: Transmit power in mBm (dBm*100) 2195 * 2196 * Return: 0 or linux error code 2197 */ 2198 static int ca8210_set_tx_power(struct ieee802154_hw *hw, s32 mbm) 2199 { 2200 struct ca8210_priv *priv = hw->priv; 2201 2202 mbm /= 100; 2203 return link_to_linux_err( 2204 mlme_set_request_sync(PHY_TRANSMIT_POWER, 0, 1, &mbm, priv->spi) 2205 ); 2206 } 2207 2208 /** 2209 * ca8210_set_cca_mode() - Sets the clear channel assessment mode of the ca8210 2210 * @hw: ieee802154_hw of target ca8210 2211 * @cca: CCA mode to set 2212 * 2213 * Return: 0 or linux error code 2214 */ 2215 static int ca8210_set_cca_mode( 2216 struct ieee802154_hw *hw, 2217 const struct wpan_phy_cca *cca 2218 ) 2219 { 2220 u8 status; 2221 u8 cca_mode; 2222 struct ca8210_priv *priv = hw->priv; 2223 2224 cca_mode = cca->mode & 3; 2225 if (cca_mode == 3 && cca->opt == NL802154_CCA_OPT_ENERGY_CARRIER_OR) { 2226 /* cca_mode 0 == CS OR ED, 3 == CS AND ED */ 2227 cca_mode = 0; 2228 } 2229 status = mlme_set_request_sync( 2230 PHY_CCA_MODE, 2231 0, 2232 1, 2233 &cca_mode, 2234 priv->spi 2235 ); 2236 if (status) { 2237 dev_err( 2238 &priv->spi->dev, 2239 "error setting cca mode, MLME-SET.confirm status = %d", 2240 status 2241 ); 2242 } 2243 return link_to_linux_err(status); 2244 } 2245 2246 /** 2247 * ca8210_set_cca_ed_level() - Sets the CCA ED level of the ca8210 2248 * @hw: ieee802154_hw of target ca8210 2249 * @level: ED level to set (in mbm) 2250 * 2251 * Sets the minimum threshold of measured energy above which the ca8210 will 2252 * back off and retry a transmission. 2253 * 2254 * Return: 0 or linux error code 2255 */ 2256 static int ca8210_set_cca_ed_level(struct ieee802154_hw *hw, s32 level) 2257 { 2258 u8 status; 2259 u8 ed_threshold = (level / 100) * 2 + 256; 2260 struct ca8210_priv *priv = hw->priv; 2261 2262 status = hwme_set_request_sync( 2263 HWME_EDTHRESHOLD, 2264 1, 2265 &ed_threshold, 2266 priv->spi 2267 ); 2268 if (status) { 2269 dev_err( 2270 &priv->spi->dev, 2271 "error setting ed threshold, HWME-SET.confirm status = %d", 2272 status 2273 ); 2274 } 2275 return link_to_linux_err(status); 2276 } 2277 2278 /** 2279 * ca8210_set_csma_params() - Sets the CSMA parameters of the ca8210 2280 * @hw: ieee802154_hw of target ca8210 2281 * @min_be: Minimum backoff exponent when backing off a transmission 2282 * @max_be: Maximum backoff exponent when backing off a transmission 2283 * @retries: Number of times to retry after backing off 2284 * 2285 * Return: 0 or linux error code 2286 */ 2287 static int ca8210_set_csma_params( 2288 struct ieee802154_hw *hw, 2289 u8 min_be, 2290 u8 max_be, 2291 u8 retries 2292 ) 2293 { 2294 u8 status; 2295 struct ca8210_priv *priv = hw->priv; 2296 2297 status = mlme_set_request_sync(MAC_MIN_BE, 0, 1, &min_be, priv->spi); 2298 if (status) { 2299 dev_err( 2300 &priv->spi->dev, 2301 "error setting min be, MLME-SET.confirm status = %d", 2302 status 2303 ); 2304 return link_to_linux_err(status); 2305 } 2306 status = mlme_set_request_sync(MAC_MAX_BE, 0, 1, &max_be, priv->spi); 2307 if (status) { 2308 dev_err( 2309 &priv->spi->dev, 2310 "error setting max be, MLME-SET.confirm status = %d", 2311 status 2312 ); 2313 return link_to_linux_err(status); 2314 } 2315 status = mlme_set_request_sync( 2316 MAC_MAX_CSMA_BACKOFFS, 2317 0, 2318 1, 2319 &retries, 2320 priv->spi 2321 ); 2322 if (status) { 2323 dev_err( 2324 &priv->spi->dev, 2325 "error setting max csma backoffs, MLME-SET.confirm status = %d", 2326 status 2327 ); 2328 } 2329 return link_to_linux_err(status); 2330 } 2331 2332 /** 2333 * ca8210_set_frame_retries() - Sets the maximum frame retries of the ca8210 2334 * @hw: ieee802154_hw of target ca8210 2335 * @retries: Number of retries 2336 * 2337 * Sets the number of times to retry a transmission if no acknowledgment was 2338 * was received from the other end when one was requested. 2339 * 2340 * Return: 0 or linux error code 2341 */ 2342 static int ca8210_set_frame_retries(struct ieee802154_hw *hw, s8 retries) 2343 { 2344 u8 status; 2345 struct ca8210_priv *priv = hw->priv; 2346 2347 status = mlme_set_request_sync( 2348 MAC_MAX_FRAME_RETRIES, 2349 0, 2350 1, 2351 &retries, 2352 priv->spi 2353 ); 2354 if (status) { 2355 dev_err( 2356 &priv->spi->dev, 2357 "error setting frame retries, MLME-SET.confirm status = %d", 2358 status 2359 ); 2360 } 2361 return link_to_linux_err(status); 2362 } 2363 2364 static int ca8210_set_promiscuous_mode(struct ieee802154_hw *hw, const bool on) 2365 { 2366 u8 status; 2367 struct ca8210_priv *priv = hw->priv; 2368 2369 status = mlme_set_request_sync( 2370 MAC_PROMISCUOUS_MODE, 2371 0, 2372 1, 2373 (const void *)&on, 2374 priv->spi 2375 ); 2376 if (status) { 2377 dev_err( 2378 &priv->spi->dev, 2379 "error setting promiscuous mode, MLME-SET.confirm status = %d", 2380 status 2381 ); 2382 } else { 2383 priv->promiscuous = on; 2384 } 2385 return link_to_linux_err(status); 2386 } 2387 2388 static const struct ieee802154_ops ca8210_phy_ops = { 2389 .start = ca8210_start, 2390 .stop = ca8210_stop, 2391 .xmit_async = ca8210_xmit_async, 2392 .ed = ca8210_get_ed, 2393 .set_channel = ca8210_set_channel, 2394 .set_hw_addr_filt = ca8210_set_hw_addr_filt, 2395 .set_txpower = ca8210_set_tx_power, 2396 .set_cca_mode = ca8210_set_cca_mode, 2397 .set_cca_ed_level = ca8210_set_cca_ed_level, 2398 .set_csma_params = ca8210_set_csma_params, 2399 .set_frame_retries = ca8210_set_frame_retries, 2400 .set_promiscuous_mode = ca8210_set_promiscuous_mode 2401 }; 2402 2403 /* Test/EVBME Interface */ 2404 2405 /** 2406 * ca8210_test_int_open() - Opens the test interface to the userspace 2407 * @inodp: inode representation of file interface 2408 * @filp: file interface 2409 * 2410 * Return: 0 or linux error code 2411 */ 2412 static int ca8210_test_int_open(struct inode *inodp, struct file *filp) 2413 { 2414 struct ca8210_priv *priv = inodp->i_private; 2415 2416 filp->private_data = priv; 2417 return 0; 2418 } 2419 2420 /** 2421 * ca8210_test_check_upstream() - Checks a command received from the upstream 2422 * testing interface for required action 2423 * @buf: Buffer containing command to check 2424 * @device_ref: Nondescript pointer to target device 2425 * 2426 * Return: 0 or linux error code 2427 */ 2428 static int ca8210_test_check_upstream(u8 *buf, void *device_ref) 2429 { 2430 int ret; 2431 u8 response[CA8210_SPI_BUF_SIZE]; 2432 2433 if (buf[0] == SPI_MLME_SET_REQUEST) { 2434 ret = tdme_checkpibattribute(buf[2], buf[4], buf + 5); 2435 if (ret) { 2436 response[0] = SPI_MLME_SET_CONFIRM; 2437 response[1] = 3; 2438 response[2] = MAC_INVALID_PARAMETER; 2439 response[3] = buf[2]; 2440 response[4] = buf[3]; 2441 if (cascoda_api_upstream) 2442 cascoda_api_upstream(response, 5, device_ref); 2443 return ret; 2444 } 2445 } 2446 if (buf[0] == SPI_MLME_ASSOCIATE_REQUEST) { 2447 return tdme_channelinit(buf[2], device_ref); 2448 } else if (buf[0] == SPI_MLME_START_REQUEST) { 2449 return tdme_channelinit(buf[4], device_ref); 2450 } else if ( 2451 (buf[0] == SPI_MLME_SET_REQUEST) && 2452 (buf[2] == PHY_CURRENT_CHANNEL) 2453 ) { 2454 return tdme_channelinit(buf[5], device_ref); 2455 } else if ( 2456 (buf[0] == SPI_TDME_SET_REQUEST) && 2457 (buf[2] == TDME_CHANNEL) 2458 ) { 2459 return tdme_channelinit(buf[4], device_ref); 2460 } else if ( 2461 (CA8210_MAC_WORKAROUNDS) && 2462 (buf[0] == SPI_MLME_RESET_REQUEST) && 2463 (buf[2] == 1) 2464 ) { 2465 /* reset COORD Bit for Channel Filtering as Coordinator */ 2466 return tdme_setsfr_request_sync( 2467 0, 2468 CA8210_SFR_MACCON, 2469 0, 2470 device_ref 2471 ); 2472 } 2473 return 0; 2474 } /* End of EVBMECheckSerialCommand() */ 2475 2476 /** 2477 * ca8210_test_int_user_write() - Called by a process in userspace to send a 2478 * message to the ca8210 drivers 2479 * @filp: file interface 2480 * @in_buf: Buffer containing message to write 2481 * @len: length of message 2482 * @off: file offset 2483 * 2484 * Return: 0 or linux error code 2485 */ 2486 static ssize_t ca8210_test_int_user_write( 2487 struct file *filp, 2488 const char __user *in_buf, 2489 size_t len, 2490 loff_t *off 2491 ) 2492 { 2493 int ret; 2494 struct ca8210_priv *priv = filp->private_data; 2495 u8 command[CA8210_SPI_BUF_SIZE]; 2496 2497 memset(command, SPI_IDLE, 6); 2498 if (len > CA8210_SPI_BUF_SIZE || len < 2) { 2499 dev_warn( 2500 &priv->spi->dev, 2501 "userspace requested erroneous write length (%zu)\n", 2502 len 2503 ); 2504 return -EBADE; 2505 } 2506 2507 ret = copy_from_user(command, in_buf, len); 2508 if (ret) { 2509 dev_err( 2510 &priv->spi->dev, 2511 "%d bytes could not be copied from userspace\n", 2512 ret 2513 ); 2514 return -EIO; 2515 } 2516 if (len != command[1] + 2) { 2517 dev_err( 2518 &priv->spi->dev, 2519 "write len does not match packet length field\n" 2520 ); 2521 return -EBADE; 2522 } 2523 2524 ret = ca8210_test_check_upstream(command, priv->spi); 2525 if (ret == 0) { 2526 ret = ca8210_spi_exchange( 2527 command, 2528 command[1] + 2, 2529 NULL, 2530 priv->spi 2531 ); 2532 if (ret < 0) { 2533 /* effectively 0 bytes were written successfully */ 2534 dev_err( 2535 &priv->spi->dev, 2536 "spi exchange failed\n" 2537 ); 2538 return ret; 2539 } 2540 if (command[0] & SPI_SYN) 2541 priv->sync_down++; 2542 } 2543 2544 return len; 2545 } 2546 2547 /** 2548 * ca8210_test_int_user_read() - Called by a process in userspace to read a 2549 * message from the ca8210 drivers 2550 * @filp: file interface 2551 * @buf: Buffer to write message to 2552 * @len: length of message to read (ignored) 2553 * @offp: file offset 2554 * 2555 * If the O_NONBLOCK flag was set when opening the file then this function will 2556 * not block, i.e. it will return if the fifo is empty. Otherwise the function 2557 * will block, i.e. wait until new data arrives. 2558 * 2559 * Return: number of bytes read 2560 */ 2561 static ssize_t ca8210_test_int_user_read( 2562 struct file *filp, 2563 char __user *buf, 2564 size_t len, 2565 loff_t *offp 2566 ) 2567 { 2568 int i, cmdlen; 2569 struct ca8210_priv *priv = filp->private_data; 2570 unsigned char *fifo_buffer; 2571 unsigned long bytes_not_copied; 2572 2573 if (filp->f_flags & O_NONBLOCK) { 2574 /* Non-blocking mode */ 2575 if (kfifo_is_empty(&priv->test.up_fifo)) 2576 return 0; 2577 } else { 2578 /* Blocking mode */ 2579 wait_event_interruptible( 2580 priv->test.readq, 2581 !kfifo_is_empty(&priv->test.up_fifo) 2582 ); 2583 } 2584 2585 if (kfifo_out(&priv->test.up_fifo, &fifo_buffer, 4) != 4) { 2586 dev_err( 2587 &priv->spi->dev, 2588 "test_interface: Wrong number of elements popped from upstream fifo\n" 2589 ); 2590 return 0; 2591 } 2592 cmdlen = fifo_buffer[1]; 2593 bytes_not_copied = cmdlen + 2; 2594 2595 bytes_not_copied = copy_to_user(buf, fifo_buffer, bytes_not_copied); 2596 if (bytes_not_copied > 0) { 2597 dev_err( 2598 &priv->spi->dev, 2599 "%lu bytes could not be copied to user space!\n", 2600 bytes_not_copied 2601 ); 2602 } 2603 2604 dev_dbg(&priv->spi->dev, "test_interface: Cmd len = %d\n", cmdlen); 2605 2606 dev_dbg(&priv->spi->dev, "test_interface: Read\n"); 2607 for (i = 0; i < cmdlen + 2; i++) 2608 dev_dbg(&priv->spi->dev, "%#03x\n", fifo_buffer[i]); 2609 2610 kfree(fifo_buffer); 2611 2612 return cmdlen + 2; 2613 } 2614 2615 /** 2616 * ca8210_test_int_ioctl() - Called by a process in userspace to enact an 2617 * arbitrary action 2618 * @filp: file interface 2619 * @ioctl_num: which action to enact 2620 * @ioctl_param: arbitrary parameter for the action 2621 * 2622 * Return: status 2623 */ 2624 static long ca8210_test_int_ioctl( 2625 struct file *filp, 2626 unsigned int ioctl_num, 2627 unsigned long ioctl_param 2628 ) 2629 { 2630 struct ca8210_priv *priv = filp->private_data; 2631 2632 switch (ioctl_num) { 2633 case CA8210_IOCTL_HARD_RESET: 2634 ca8210_reset_send(priv->spi, ioctl_param); 2635 break; 2636 default: 2637 break; 2638 } 2639 return 0; 2640 } 2641 2642 /** 2643 * ca8210_test_int_poll() - Called by a process in userspace to determine which 2644 * actions are currently possible for the file 2645 * @filp: file interface 2646 * @ptable: poll table 2647 * 2648 * Return: set of poll return flags 2649 */ 2650 static __poll_t ca8210_test_int_poll( 2651 struct file *filp, 2652 struct poll_table_struct *ptable 2653 ) 2654 { 2655 __poll_t return_flags = 0; 2656 struct ca8210_priv *priv = filp->private_data; 2657 2658 poll_wait(filp, &priv->test.readq, ptable); 2659 if (!kfifo_is_empty(&priv->test.up_fifo)) 2660 return_flags |= (EPOLLIN | EPOLLRDNORM); 2661 if (wait_event_interruptible( 2662 priv->test.readq, 2663 !kfifo_is_empty(&priv->test.up_fifo))) { 2664 return EPOLLERR; 2665 } 2666 return return_flags; 2667 } 2668 2669 static const struct file_operations test_int_fops = { 2670 .read = ca8210_test_int_user_read, 2671 .write = ca8210_test_int_user_write, 2672 .open = ca8210_test_int_open, 2673 .release = NULL, 2674 .unlocked_ioctl = ca8210_test_int_ioctl, 2675 .poll = ca8210_test_int_poll 2676 }; 2677 2678 /* Init/Deinit */ 2679 2680 /** 2681 * ca8210_get_platform_data() - Populate a ca8210_platform_data object 2682 * @spi_device: Pointer to ca8210 spi device object to get data for 2683 * @pdata: Pointer to ca8210_platform_data object to populate 2684 * 2685 * Return: 0 or linux error code 2686 */ 2687 static int ca8210_get_platform_data( 2688 struct spi_device *spi_device, 2689 struct ca8210_platform_data *pdata 2690 ) 2691 { 2692 int ret = 0; 2693 2694 if (!spi_device->dev.of_node) 2695 return -EINVAL; 2696 2697 pdata->extclockenable = of_property_read_bool( 2698 spi_device->dev.of_node, 2699 "extclock-enable" 2700 ); 2701 if (pdata->extclockenable) { 2702 ret = of_property_read_u32( 2703 spi_device->dev.of_node, 2704 "extclock-freq", 2705 &pdata->extclockfreq 2706 ); 2707 if (ret < 0) 2708 return ret; 2709 2710 ret = of_property_read_u32( 2711 spi_device->dev.of_node, 2712 "extclock-gpio", 2713 &pdata->extclockgpio 2714 ); 2715 } 2716 2717 return ret; 2718 } 2719 2720 /** 2721 * ca8210_config_extern_clk() - Configure the external clock provided by the 2722 * ca8210 2723 * @pdata: Pointer to ca8210_platform_data containing clock parameters 2724 * @spi: Pointer to target ca8210 spi device 2725 * @on: True to turn the clock on, false to turn off 2726 * 2727 * The external clock is configured with a frequency and output pin taken from 2728 * the platform data. 2729 * 2730 * Return: 0 or linux error code 2731 */ 2732 static int ca8210_config_extern_clk( 2733 struct ca8210_platform_data *pdata, 2734 struct spi_device *spi, 2735 bool on 2736 ) 2737 { 2738 u8 clkparam[2]; 2739 2740 if (on) { 2741 dev_info(&spi->dev, "Switching external clock on\n"); 2742 switch (pdata->extclockfreq) { 2743 case SIXTEEN_MHZ: 2744 clkparam[0] = 1; 2745 break; 2746 case EIGHT_MHZ: 2747 clkparam[0] = 2; 2748 break; 2749 case FOUR_MHZ: 2750 clkparam[0] = 3; 2751 break; 2752 case TWO_MHZ: 2753 clkparam[0] = 4; 2754 break; 2755 case ONE_MHZ: 2756 clkparam[0] = 5; 2757 break; 2758 default: 2759 dev_crit(&spi->dev, "Invalid extclock-freq\n"); 2760 return -EINVAL; 2761 } 2762 clkparam[1] = pdata->extclockgpio; 2763 } else { 2764 dev_info(&spi->dev, "Switching external clock off\n"); 2765 clkparam[0] = 0; /* off */ 2766 clkparam[1] = 0; 2767 } 2768 return link_to_linux_err( 2769 hwme_set_request_sync(HWME_SYSCLKOUT, 2, clkparam, spi) 2770 ); 2771 } 2772 2773 /** 2774 * ca8210_register_ext_clock() - Register ca8210's external clock with kernel 2775 * @spi: Pointer to target ca8210 spi device 2776 * 2777 * Return: 0 or linux error code 2778 */ 2779 static int ca8210_register_ext_clock(struct spi_device *spi) 2780 { 2781 struct device_node *np = spi->dev.of_node; 2782 struct ca8210_priv *priv = spi_get_drvdata(spi); 2783 struct ca8210_platform_data *pdata = spi->dev.platform_data; 2784 int ret = 0; 2785 2786 if (!np) 2787 return -EFAULT; 2788 2789 priv->clk = clk_register_fixed_rate( 2790 &spi->dev, 2791 np->name, 2792 NULL, 2793 0, 2794 pdata->extclockfreq 2795 ); 2796 2797 if (IS_ERR(priv->clk)) { 2798 dev_crit(&spi->dev, "Failed to register external clk\n"); 2799 return PTR_ERR(priv->clk); 2800 } 2801 ret = of_clk_add_provider(np, of_clk_src_simple_get, priv->clk); 2802 if (ret) { 2803 clk_unregister(priv->clk); 2804 dev_crit( 2805 &spi->dev, 2806 "Failed to register external clock as clock provider\n" 2807 ); 2808 } else { 2809 dev_info(&spi->dev, "External clock set as clock provider\n"); 2810 } 2811 2812 return ret; 2813 } 2814 2815 /** 2816 * ca8210_unregister_ext_clock() - Unregister ca8210's external clock with 2817 * kernel 2818 * @spi: Pointer to target ca8210 spi device 2819 */ 2820 static void ca8210_unregister_ext_clock(struct spi_device *spi) 2821 { 2822 struct ca8210_priv *priv = spi_get_drvdata(spi); 2823 2824 if (!priv->clk) 2825 return 2826 2827 of_clk_del_provider(spi->dev.of_node); 2828 clk_unregister(priv->clk); 2829 dev_info(&spi->dev, "External clock unregistered\n"); 2830 } 2831 2832 /** 2833 * ca8210_reset_init() - Initialise the reset input to the ca8210 2834 * @spi: Pointer to target ca8210 spi device 2835 * 2836 * Return: 0 or linux error code 2837 */ 2838 static int ca8210_reset_init(struct spi_device *spi) 2839 { 2840 int ret; 2841 struct ca8210_platform_data *pdata = spi->dev.platform_data; 2842 2843 pdata->gpio_reset = of_get_named_gpio( 2844 spi->dev.of_node, 2845 "reset-gpio", 2846 0 2847 ); 2848 2849 ret = gpio_direction_output(pdata->gpio_reset, 1); 2850 if (ret < 0) { 2851 dev_crit( 2852 &spi->dev, 2853 "Reset GPIO %d did not set to output mode\n", 2854 pdata->gpio_reset 2855 ); 2856 } 2857 2858 return ret; 2859 } 2860 2861 /** 2862 * ca8210_interrupt_init() - Initialise the irq output from the ca8210 2863 * @spi: Pointer to target ca8210 spi device 2864 * 2865 * Return: 0 or linux error code 2866 */ 2867 static int ca8210_interrupt_init(struct spi_device *spi) 2868 { 2869 int ret; 2870 struct ca8210_platform_data *pdata = spi->dev.platform_data; 2871 2872 pdata->gpio_irq = of_get_named_gpio( 2873 spi->dev.of_node, 2874 "irq-gpio", 2875 0 2876 ); 2877 2878 pdata->irq_id = gpio_to_irq(pdata->gpio_irq); 2879 if (pdata->irq_id < 0) { 2880 dev_crit( 2881 &spi->dev, 2882 "Could not get irq for gpio pin %d\n", 2883 pdata->gpio_irq 2884 ); 2885 gpio_free(pdata->gpio_irq); 2886 return pdata->irq_id; 2887 } 2888 2889 ret = request_irq( 2890 pdata->irq_id, 2891 ca8210_interrupt_handler, 2892 IRQF_TRIGGER_FALLING, 2893 "ca8210-irq", 2894 spi_get_drvdata(spi) 2895 ); 2896 if (ret) { 2897 dev_crit(&spi->dev, "request_irq %d failed\n", pdata->irq_id); 2898 gpio_unexport(pdata->gpio_irq); 2899 gpio_free(pdata->gpio_irq); 2900 } 2901 2902 return ret; 2903 } 2904 2905 /** 2906 * ca8210_dev_com_init() - Initialise the spi communication component 2907 * @priv: Pointer to private data structure 2908 * 2909 * Return: 0 or linux error code 2910 */ 2911 static int ca8210_dev_com_init(struct ca8210_priv *priv) 2912 { 2913 priv->mlme_workqueue = alloc_ordered_workqueue( 2914 "MLME work queue", 2915 WQ_UNBOUND 2916 ); 2917 if (!priv->mlme_workqueue) { 2918 dev_crit(&priv->spi->dev, "alloc of mlme_workqueue failed!\n"); 2919 return -ENOMEM; 2920 } 2921 2922 priv->irq_workqueue = alloc_ordered_workqueue( 2923 "ca8210 irq worker", 2924 WQ_UNBOUND 2925 ); 2926 if (!priv->irq_workqueue) { 2927 dev_crit(&priv->spi->dev, "alloc of irq_workqueue failed!\n"); 2928 return -ENOMEM; 2929 } 2930 2931 return 0; 2932 } 2933 2934 /** 2935 * ca8210_dev_com_clear() - Deinitialise the spi communication component 2936 * @priv: Pointer to private data structure 2937 */ 2938 static void ca8210_dev_com_clear(struct ca8210_priv *priv) 2939 { 2940 flush_workqueue(priv->mlme_workqueue); 2941 destroy_workqueue(priv->mlme_workqueue); 2942 flush_workqueue(priv->irq_workqueue); 2943 destroy_workqueue(priv->irq_workqueue); 2944 } 2945 2946 #define CA8210_MAX_TX_POWERS (9) 2947 static const s32 ca8210_tx_powers[CA8210_MAX_TX_POWERS] = { 2948 800, 700, 600, 500, 400, 300, 200, 100, 0 2949 }; 2950 2951 #define CA8210_MAX_ED_LEVELS (21) 2952 static const s32 ca8210_ed_levels[CA8210_MAX_ED_LEVELS] = { 2953 -10300, -10250, -10200, -10150, -10100, -10050, -10000, -9950, -9900, 2954 -9850, -9800, -9750, -9700, -9650, -9600, -9550, -9500, -9450, -9400, 2955 -9350, -9300 2956 }; 2957 2958 /** 2959 * ca8210_hw_setup() - Populate the ieee802154_hw phy attributes with the 2960 * ca8210's defaults 2961 * @ca8210_hw: Pointer to ieee802154_hw to populate 2962 */ 2963 static void ca8210_hw_setup(struct ieee802154_hw *ca8210_hw) 2964 { 2965 /* Support channels 11-26 */ 2966 ca8210_hw->phy->supported.channels[0] = CA8210_VALID_CHANNELS; 2967 ca8210_hw->phy->supported.tx_powers_size = CA8210_MAX_TX_POWERS; 2968 ca8210_hw->phy->supported.tx_powers = ca8210_tx_powers; 2969 ca8210_hw->phy->supported.cca_ed_levels_size = CA8210_MAX_ED_LEVELS; 2970 ca8210_hw->phy->supported.cca_ed_levels = ca8210_ed_levels; 2971 ca8210_hw->phy->current_channel = 18; 2972 ca8210_hw->phy->current_page = 0; 2973 ca8210_hw->phy->transmit_power = 800; 2974 ca8210_hw->phy->cca.mode = NL802154_CCA_ENERGY_CARRIER; 2975 ca8210_hw->phy->cca.opt = NL802154_CCA_OPT_ENERGY_CARRIER_AND; 2976 ca8210_hw->phy->cca_ed_level = -9800; 2977 ca8210_hw->phy->symbol_duration = 16; 2978 ca8210_hw->phy->lifs_period = 40; 2979 ca8210_hw->phy->sifs_period = 12; 2980 ca8210_hw->flags = 2981 IEEE802154_HW_AFILT | 2982 IEEE802154_HW_OMIT_CKSUM | 2983 IEEE802154_HW_FRAME_RETRIES | 2984 IEEE802154_HW_PROMISCUOUS | 2985 IEEE802154_HW_CSMA_PARAMS; 2986 ca8210_hw->phy->flags = 2987 WPAN_PHY_FLAG_TXPOWER | 2988 WPAN_PHY_FLAG_CCA_ED_LEVEL | 2989 WPAN_PHY_FLAG_CCA_MODE; 2990 } 2991 2992 /** 2993 * ca8210_test_interface_init() - Initialise the test file interface 2994 * @priv: Pointer to private data structure 2995 * 2996 * Provided as an alternative to the standard linux network interface, the test 2997 * interface exposes a file in the filesystem (ca8210_test) that allows 2998 * 802.15.4 SAP Commands and Cascoda EVBME commands to be sent directly to 2999 * the stack. 3000 * 3001 * Return: 0 or linux error code 3002 */ 3003 static int ca8210_test_interface_init(struct ca8210_priv *priv) 3004 { 3005 struct ca8210_test *test = &priv->test; 3006 char node_name[32]; 3007 3008 snprintf( 3009 node_name, 3010 sizeof(node_name), 3011 "ca8210@%d_%d", 3012 priv->spi->master->bus_num, 3013 priv->spi->chip_select 3014 ); 3015 3016 test->ca8210_dfs_spi_int = debugfs_create_file( 3017 node_name, 3018 0600, /* S_IRUSR | S_IWUSR */ 3019 NULL, 3020 priv, 3021 &test_int_fops 3022 ); 3023 3024 debugfs_create_symlink("ca8210", NULL, node_name); 3025 init_waitqueue_head(&test->readq); 3026 return kfifo_alloc( 3027 &test->up_fifo, 3028 CA8210_TEST_INT_FIFO_SIZE, 3029 GFP_KERNEL 3030 ); 3031 } 3032 3033 /** 3034 * ca8210_test_interface_clear() - Deinitialise the test file interface 3035 * @priv: Pointer to private data structure 3036 */ 3037 static void ca8210_test_interface_clear(struct ca8210_priv *priv) 3038 { 3039 struct ca8210_test *test = &priv->test; 3040 3041 debugfs_remove(test->ca8210_dfs_spi_int); 3042 kfifo_free(&test->up_fifo); 3043 dev_info(&priv->spi->dev, "Test interface removed\n"); 3044 } 3045 3046 /** 3047 * ca8210_remove() - Shut down a ca8210 upon being disconnected 3048 * @priv: Pointer to private data structure 3049 * 3050 * Return: 0 or linux error code 3051 */ 3052 static int ca8210_remove(struct spi_device *spi_device) 3053 { 3054 struct ca8210_priv *priv; 3055 struct ca8210_platform_data *pdata; 3056 3057 dev_info(&spi_device->dev, "Removing ca8210\n"); 3058 3059 pdata = spi_device->dev.platform_data; 3060 if (pdata) { 3061 if (pdata->extclockenable) { 3062 ca8210_unregister_ext_clock(spi_device); 3063 ca8210_config_extern_clk(pdata, spi_device, 0); 3064 } 3065 free_irq(pdata->irq_id, spi_device->dev.driver_data); 3066 kfree(pdata); 3067 spi_device->dev.platform_data = NULL; 3068 } 3069 /* get spi_device private data */ 3070 priv = spi_get_drvdata(spi_device); 3071 if (priv) { 3072 dev_info( 3073 &spi_device->dev, 3074 "sync_down = %d, sync_up = %d\n", 3075 priv->sync_down, 3076 priv->sync_up 3077 ); 3078 ca8210_dev_com_clear(spi_device->dev.driver_data); 3079 if (priv->hw) { 3080 if (priv->hw_registered) 3081 ieee802154_unregister_hw(priv->hw); 3082 ieee802154_free_hw(priv->hw); 3083 priv->hw = NULL; 3084 dev_info( 3085 &spi_device->dev, 3086 "Unregistered & freed ieee802154_hw.\n" 3087 ); 3088 } 3089 if (IS_ENABLED(CONFIG_IEEE802154_CA8210_DEBUGFS)) 3090 ca8210_test_interface_clear(priv); 3091 } 3092 3093 return 0; 3094 } 3095 3096 /** 3097 * ca8210_probe() - Set up a connected ca8210 upon being detected by the system 3098 * @priv: Pointer to private data structure 3099 * 3100 * Return: 0 or linux error code 3101 */ 3102 static int ca8210_probe(struct spi_device *spi_device) 3103 { 3104 struct ca8210_priv *priv; 3105 struct ieee802154_hw *hw; 3106 struct ca8210_platform_data *pdata; 3107 int ret; 3108 3109 dev_info(&spi_device->dev, "Inserting ca8210\n"); 3110 3111 /* allocate ieee802154_hw and private data */ 3112 hw = ieee802154_alloc_hw(sizeof(struct ca8210_priv), &ca8210_phy_ops); 3113 if (!hw) { 3114 dev_crit(&spi_device->dev, "ieee802154_alloc_hw failed\n"); 3115 ret = -ENOMEM; 3116 goto error; 3117 } 3118 3119 priv = hw->priv; 3120 priv->hw = hw; 3121 priv->spi = spi_device; 3122 hw->parent = &spi_device->dev; 3123 spin_lock_init(&priv->lock); 3124 priv->async_tx_pending = false; 3125 priv->hw_registered = false; 3126 priv->sync_up = 0; 3127 priv->sync_down = 0; 3128 priv->promiscuous = false; 3129 priv->retries = 0; 3130 init_completion(&priv->ca8210_is_awake); 3131 init_completion(&priv->spi_transfer_complete); 3132 init_completion(&priv->sync_exchange_complete); 3133 spi_set_drvdata(priv->spi, priv); 3134 if (IS_ENABLED(CONFIG_IEEE802154_CA8210_DEBUGFS)) { 3135 cascoda_api_upstream = ca8210_test_int_driver_write; 3136 ca8210_test_interface_init(priv); 3137 } else { 3138 cascoda_api_upstream = NULL; 3139 } 3140 ca8210_hw_setup(hw); 3141 ieee802154_random_extended_addr(&hw->phy->perm_extended_addr); 3142 3143 pdata = kmalloc(sizeof(*pdata), GFP_KERNEL); 3144 if (!pdata) { 3145 ret = -ENOMEM; 3146 goto error; 3147 } 3148 3149 priv->spi->dev.platform_data = pdata; 3150 ret = ca8210_get_platform_data(priv->spi, pdata); 3151 if (ret) { 3152 dev_crit(&spi_device->dev, "ca8210_get_platform_data failed\n"); 3153 goto error; 3154 } 3155 3156 ret = ca8210_dev_com_init(priv); 3157 if (ret) { 3158 dev_crit(&spi_device->dev, "ca8210_dev_com_init failed\n"); 3159 goto error; 3160 } 3161 ret = ca8210_reset_init(priv->spi); 3162 if (ret) { 3163 dev_crit(&spi_device->dev, "ca8210_reset_init failed\n"); 3164 goto error; 3165 } 3166 3167 ret = ca8210_interrupt_init(priv->spi); 3168 if (ret) { 3169 dev_crit(&spi_device->dev, "ca8210_interrupt_init failed\n"); 3170 goto error; 3171 } 3172 3173 msleep(100); 3174 3175 ca8210_reset_send(priv->spi, 1); 3176 3177 ret = tdme_chipinit(priv->spi); 3178 if (ret) { 3179 dev_crit(&spi_device->dev, "tdme_chipinit failed\n"); 3180 goto error; 3181 } 3182 3183 if (pdata->extclockenable) { 3184 ret = ca8210_config_extern_clk(pdata, priv->spi, 1); 3185 if (ret) { 3186 dev_crit( 3187 &spi_device->dev, 3188 "ca8210_config_extern_clk failed\n" 3189 ); 3190 goto error; 3191 } 3192 ret = ca8210_register_ext_clock(priv->spi); 3193 if (ret) { 3194 dev_crit( 3195 &spi_device->dev, 3196 "ca8210_register_ext_clock failed\n" 3197 ); 3198 goto error; 3199 } 3200 } 3201 3202 ret = ieee802154_register_hw(hw); 3203 if (ret) { 3204 dev_crit(&spi_device->dev, "ieee802154_register_hw failed\n"); 3205 goto error; 3206 } 3207 priv->hw_registered = true; 3208 3209 return 0; 3210 error: 3211 msleep(100); /* wait for pending spi transfers to complete */ 3212 ca8210_remove(spi_device); 3213 return link_to_linux_err(ret); 3214 } 3215 3216 static const struct of_device_id ca8210_of_ids[] = { 3217 {.compatible = "cascoda,ca8210", }, 3218 {}, 3219 }; 3220 MODULE_DEVICE_TABLE(of, ca8210_of_ids); 3221 3222 static struct spi_driver ca8210_spi_driver = { 3223 .driver = { 3224 .name = DRIVER_NAME, 3225 .owner = THIS_MODULE, 3226 .of_match_table = of_match_ptr(ca8210_of_ids), 3227 }, 3228 .probe = ca8210_probe, 3229 .remove = ca8210_remove 3230 }; 3231 3232 module_spi_driver(ca8210_spi_driver); 3233 3234 MODULE_AUTHOR("Harry Morris <h.morris@cascoda.com>"); 3235 MODULE_DESCRIPTION("CA-8210 SoftMAC driver"); 3236 MODULE_LICENSE("Dual BSD/GPL"); 3237 MODULE_VERSION("1.0"); 3238