1 #define RCS_ID "$Id: scc.c,v 1.75 1998/11/04 15:15:01 jreuter Exp jreuter $" 2 3 #define VERSION "3.0" 4 5 /* 6 * Please use z8530drv-utils-3.0 with this version. 7 * ------------------ 8 * 9 * You can find a subset of the documentation in 10 * Documentation/networking/z8530drv.txt. 11 */ 12 13 /* 14 ******************************************************************** 15 * SCC.C - Linux driver for Z8530 based HDLC cards for AX.25 * 16 ******************************************************************** 17 18 19 ******************************************************************** 20 21 Copyright (c) 1993, 2000 Joerg Reuter DL1BKE 22 23 portions (c) 1993 Guido ten Dolle PE1NNZ 24 25 ******************************************************************** 26 27 The driver and the programs in the archive are UNDER CONSTRUCTION. 28 The code is likely to fail, and so your kernel could --- even 29 a whole network. 30 31 This driver is intended for Amateur Radio use. If you are running it 32 for commercial purposes, please drop me a note. I am nosy... 33 34 ...BUT: 35 36 ! You m u s t recognize the appropriate legislations of your country ! 37 ! before you connect a radio to the SCC board and start to transmit or ! 38 ! receive. The GPL allows you to use the d r i v e r, NOT the RADIO! ! 39 40 For non-Amateur-Radio use please note that you might need a special 41 allowance/licence from the designer of the SCC Board and/or the 42 MODEM. 43 44 This program is free software; you can redistribute it and/or modify 45 it under the terms of the (modified) GNU General Public License 46 delivered with the Linux kernel source. 47 48 This program is distributed in the hope that it will be useful, 49 but WITHOUT ANY WARRANTY; without even the implied warranty of 50 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 51 GNU General Public License for more details. 52 53 You should find a copy of the GNU General Public License in 54 /usr/src/linux/COPYING; 55 56 ******************************************************************** 57 58 59 Incomplete history of z8530drv: 60 ------------------------------- 61 62 1994-09-13 started to write the driver, rescued most of my own 63 code (and Hans Alblas' memory buffer pool concept) from 64 an earlier project "sccdrv" which was initiated by 65 Guido ten Dolle. Not much of the old driver survived, 66 though. The first version I put my hands on was sccdrv1.3 67 from August 1993. The memory buffer pool concept 68 appeared in an unauthorized sccdrv version (1.5) from 69 August 1994. 70 71 1995-01-31 changed copyright notice to GPL without limitations. 72 73 . 74 . <SNIP> 75 . 76 77 1996-10-05 New semester, new driver... 78 79 * KISS TNC emulator removed (TTY driver) 80 * Source moved to drivers/net/ 81 * Includes Z8530 defines from drivers/net/z8530.h 82 * Uses sk_buffer memory management 83 * Reduced overhead of /proc/net/z8530drv output 84 * Streamlined quite a lot things 85 * Invents brand new bugs... ;-) 86 87 The move to version number 3.0 reflects theses changes. 88 You can use 'kissbridge' if you need a KISS TNC emulator. 89 90 1996-12-13 Fixed for Linux networking changes. (G4KLX) 91 1997-01-08 Fixed the remaining problems. 92 1997-04-02 Hopefully fixed the problems with the new *_timer() 93 routines, added calibration code. 94 1997-10-12 Made SCC_DELAY a CONFIG option, added CONFIG_SCC_TRXECHO 95 1998-01-29 Small fix to avoid lock-up on initialization 96 1998-09-29 Fixed the "grouping" bugs, tx_inhibit works again, 97 using dev->tx_queue_len now instead of MAXQUEUE now. 98 1998-10-21 Postponed the spinlock changes, would need a lot of 99 testing I currently don't have the time to. Softdcd doesn't 100 work. 101 1998-11-04 Softdcd does not work correctly in DPLL mode, in fact it 102 never did. The DPLL locks on noise, the SYNC unit sees 103 flags that aren't... Restarting the DPLL does not help 104 either, it resynchronizes too slow and the first received 105 frame gets lost. 106 2000-02-13 Fixed for new network driver interface changes, still 107 does TX timeouts itself since it uses its own queue 108 scheme. 109 110 Thanks to all who contributed to this driver with ideas and bug 111 reports! 112 113 NB -- if you find errors, change something, please let me know 114 first before you distribute it... And please don't touch 115 the version number. Just replace my callsign in 116 "v3.0.dl1bke" with your own. Just to avoid confusion... 117 118 If you want to add your modification to the linux distribution 119 please (!) contact me first. 120 121 New versions of the driver will be announced on the linux-hams 122 mailing list on vger.kernel.org. To subscribe send an e-mail 123 to majordomo@vger.kernel.org with the following line in 124 the body of the mail: 125 126 subscribe linux-hams 127 128 The content of the "Subject" field will be ignored. 129 130 vy 73, 131 Joerg Reuter ampr-net: dl1bke@db0pra.ampr.org 132 AX-25 : DL1BKE @ DB0ABH.#BAY.DEU.EU 133 Internet: jreuter@yaina.de 134 www : http://yaina.de/jreuter 135 */ 136 137 /* ----------------------------------------------------------------------- */ 138 139 #undef SCC_LDELAY /* slow it even a bit more down */ 140 #undef SCC_DONT_CHECK /* don't look if the SCCs you specified are available */ 141 142 #define SCC_MAXCHIPS 4 /* number of max. supported chips */ 143 #define SCC_BUFSIZE 384 /* must not exceed 4096 */ 144 #undef SCC_DEBUG 145 146 #define SCC_DEFAULT_CLOCK 4915200 147 /* default pclock if nothing is specified */ 148 149 /* ----------------------------------------------------------------------- */ 150 151 #include <linux/module.h> 152 #include <linux/errno.h> 153 #include <linux/signal.h> 154 #include <linux/timer.h> 155 #include <linux/interrupt.h> 156 #include <linux/ioport.h> 157 #include <linux/string.h> 158 #include <linux/in.h> 159 #include <linux/fcntl.h> 160 #include <linux/ptrace.h> 161 #include <linux/delay.h> 162 #include <linux/skbuff.h> 163 #include <linux/netdevice.h> 164 #include <linux/rtnetlink.h> 165 #include <linux/if_ether.h> 166 #include <linux/if_arp.h> 167 #include <linux/socket.h> 168 #include <linux/init.h> 169 #include <linux/scc.h> 170 #include <linux/ctype.h> 171 #include <linux/kernel.h> 172 #include <linux/proc_fs.h> 173 #include <linux/seq_file.h> 174 #include <linux/bitops.h> 175 176 #include <net/net_namespace.h> 177 #include <net/ax25.h> 178 179 #include <asm/irq.h> 180 #include <asm/io.h> 181 #include <asm/uaccess.h> 182 183 #include "z8530.h" 184 185 static const char banner[] __initdata = KERN_INFO \ 186 "AX.25: Z8530 SCC driver version "VERSION".dl1bke\n"; 187 188 static void t_dwait(unsigned long); 189 static void t_txdelay(unsigned long); 190 static void t_tail(unsigned long); 191 static void t_busy(unsigned long); 192 static void t_maxkeyup(unsigned long); 193 static void t_idle(unsigned long); 194 static void scc_tx_done(struct scc_channel *); 195 static void scc_start_tx_timer(struct scc_channel *, void (*)(unsigned long), unsigned long); 196 static void scc_start_maxkeyup(struct scc_channel *); 197 static void scc_start_defer(struct scc_channel *); 198 199 static void z8530_init(void); 200 201 static void init_channel(struct scc_channel *scc); 202 static void scc_key_trx (struct scc_channel *scc, char tx); 203 static void scc_init_timer(struct scc_channel *scc); 204 205 static int scc_net_alloc(const char *name, struct scc_channel *scc); 206 static void scc_net_setup(struct net_device *dev); 207 static int scc_net_open(struct net_device *dev); 208 static int scc_net_close(struct net_device *dev); 209 static void scc_net_rx(struct scc_channel *scc, struct sk_buff *skb); 210 static netdev_tx_t scc_net_tx(struct sk_buff *skb, 211 struct net_device *dev); 212 static int scc_net_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd); 213 static int scc_net_set_mac_address(struct net_device *dev, void *addr); 214 static struct net_device_stats * scc_net_get_stats(struct net_device *dev); 215 216 static unsigned char SCC_DriverName[] = "scc"; 217 218 static struct irqflags { unsigned char used : 1; } Ivec[NR_IRQS]; 219 220 static struct scc_channel SCC_Info[2 * SCC_MAXCHIPS]; /* information per channel */ 221 222 static struct scc_ctrl { 223 io_port chan_A; 224 io_port chan_B; 225 int irq; 226 } SCC_ctrl[SCC_MAXCHIPS+1]; 227 228 static unsigned char Driver_Initialized; 229 static int Nchips; 230 static io_port Vector_Latch; 231 232 233 /* ******************************************************************** */ 234 /* * Port Access Functions * */ 235 /* ******************************************************************** */ 236 237 /* These provide interrupt save 2-step access to the Z8530 registers */ 238 239 static DEFINE_SPINLOCK(iolock); /* Guards paired accesses */ 240 241 static inline unsigned char InReg(io_port port, unsigned char reg) 242 { 243 unsigned long flags; 244 unsigned char r; 245 246 spin_lock_irqsave(&iolock, flags); 247 #ifdef SCC_LDELAY 248 Outb(port, reg); 249 udelay(SCC_LDELAY); 250 r=Inb(port); 251 udelay(SCC_LDELAY); 252 #else 253 Outb(port, reg); 254 r=Inb(port); 255 #endif 256 spin_unlock_irqrestore(&iolock, flags); 257 return r; 258 } 259 260 static inline void OutReg(io_port port, unsigned char reg, unsigned char val) 261 { 262 unsigned long flags; 263 264 spin_lock_irqsave(&iolock, flags); 265 #ifdef SCC_LDELAY 266 Outb(port, reg); udelay(SCC_LDELAY); 267 Outb(port, val); udelay(SCC_LDELAY); 268 #else 269 Outb(port, reg); 270 Outb(port, val); 271 #endif 272 spin_unlock_irqrestore(&iolock, flags); 273 } 274 275 static inline void wr(struct scc_channel *scc, unsigned char reg, 276 unsigned char val) 277 { 278 OutReg(scc->ctrl, reg, (scc->wreg[reg] = val)); 279 } 280 281 static inline void or(struct scc_channel *scc, unsigned char reg, unsigned char val) 282 { 283 OutReg(scc->ctrl, reg, (scc->wreg[reg] |= val)); 284 } 285 286 static inline void cl(struct scc_channel *scc, unsigned char reg, unsigned char val) 287 { 288 OutReg(scc->ctrl, reg, (scc->wreg[reg] &= ~val)); 289 } 290 291 /* ******************************************************************** */ 292 /* * Some useful macros * */ 293 /* ******************************************************************** */ 294 295 static inline void scc_discard_buffers(struct scc_channel *scc) 296 { 297 unsigned long flags; 298 299 spin_lock_irqsave(&scc->lock, flags); 300 if (scc->tx_buff != NULL) 301 { 302 dev_kfree_skb(scc->tx_buff); 303 scc->tx_buff = NULL; 304 } 305 306 while (!skb_queue_empty(&scc->tx_queue)) 307 dev_kfree_skb(skb_dequeue(&scc->tx_queue)); 308 309 spin_unlock_irqrestore(&scc->lock, flags); 310 } 311 312 313 314 /* ******************************************************************** */ 315 /* * Interrupt Service Routines * */ 316 /* ******************************************************************** */ 317 318 319 /* ----> subroutines for the interrupt handlers <---- */ 320 321 static inline void scc_notify(struct scc_channel *scc, int event) 322 { 323 struct sk_buff *skb; 324 char *bp; 325 326 if (scc->kiss.fulldup != KISS_DUPLEX_OPTIMA) 327 return; 328 329 skb = dev_alloc_skb(2); 330 if (skb != NULL) 331 { 332 bp = skb_put(skb, 2); 333 *bp++ = PARAM_HWEVENT; 334 *bp++ = event; 335 scc_net_rx(scc, skb); 336 } else 337 scc->stat.nospace++; 338 } 339 340 static inline void flush_rx_FIFO(struct scc_channel *scc) 341 { 342 int k; 343 344 for (k=0; k<3; k++) 345 Inb(scc->data); 346 347 if(scc->rx_buff != NULL) /* did we receive something? */ 348 { 349 scc->stat.rxerrs++; /* then count it as an error */ 350 dev_kfree_skb_irq(scc->rx_buff); 351 scc->rx_buff = NULL; 352 } 353 } 354 355 static void start_hunt(struct scc_channel *scc) 356 { 357 if ((scc->modem.clocksrc != CLK_EXTERNAL)) 358 OutReg(scc->ctrl,R14,SEARCH|scc->wreg[R14]); /* DPLL: enter search mode */ 359 or(scc,R3,ENT_HM|RxENABLE); /* enable the receiver, hunt mode */ 360 } 361 362 /* ----> four different interrupt handlers for Tx, Rx, changing of */ 363 /* DCD/CTS and Rx/Tx errors */ 364 365 /* Transmitter interrupt handler */ 366 static inline void scc_txint(struct scc_channel *scc) 367 { 368 struct sk_buff *skb; 369 370 scc->stat.txints++; 371 skb = scc->tx_buff; 372 373 /* send first octet */ 374 375 if (skb == NULL) 376 { 377 skb = skb_dequeue(&scc->tx_queue); 378 scc->tx_buff = skb; 379 netif_wake_queue(scc->dev); 380 381 if (skb == NULL) 382 { 383 scc_tx_done(scc); 384 Outb(scc->ctrl, RES_Tx_P); 385 return; 386 } 387 388 if (skb->len == 0) /* Paranoia... */ 389 { 390 dev_kfree_skb_irq(skb); 391 scc->tx_buff = NULL; 392 scc_tx_done(scc); 393 Outb(scc->ctrl, RES_Tx_P); 394 return; 395 } 396 397 scc->stat.tx_state = TXS_ACTIVE; 398 399 OutReg(scc->ctrl, R0, RES_Tx_CRC); 400 /* reset CRC generator */ 401 or(scc,R10,ABUNDER); /* re-install underrun protection */ 402 Outb(scc->data,*skb->data); /* send byte */ 403 skb_pull(skb, 1); 404 405 if (!scc->enhanced) /* reset EOM latch */ 406 Outb(scc->ctrl,RES_EOM_L); 407 return; 408 } 409 410 /* End Of Frame... */ 411 412 if (skb->len == 0) 413 { 414 Outb(scc->ctrl, RES_Tx_P); /* reset pending int */ 415 cl(scc, R10, ABUNDER); /* send CRC */ 416 dev_kfree_skb_irq(skb); 417 scc->tx_buff = NULL; 418 scc->stat.tx_state = TXS_NEWFRAME; /* next frame... */ 419 return; 420 } 421 422 /* send octet */ 423 424 Outb(scc->data,*skb->data); 425 skb_pull(skb, 1); 426 } 427 428 429 /* External/Status interrupt handler */ 430 static inline void scc_exint(struct scc_channel *scc) 431 { 432 unsigned char status,changes,chg_and_stat; 433 434 scc->stat.exints++; 435 436 status = InReg(scc->ctrl,R0); 437 changes = status ^ scc->status; 438 chg_and_stat = changes & status; 439 440 /* ABORT: generated whenever DCD drops while receiving */ 441 442 if (chg_and_stat & BRK_ABRT) /* Received an ABORT */ 443 flush_rx_FIFO(scc); 444 445 /* HUNT: software DCD; on = waiting for SYNC, off = receiving frame */ 446 447 if ((changes & SYNC_HUNT) && scc->kiss.softdcd) 448 { 449 if (status & SYNC_HUNT) 450 { 451 scc->dcd = 0; 452 flush_rx_FIFO(scc); 453 if ((scc->modem.clocksrc != CLK_EXTERNAL)) 454 OutReg(scc->ctrl,R14,SEARCH|scc->wreg[R14]); /* DPLL: enter search mode */ 455 } else { 456 scc->dcd = 1; 457 } 458 459 scc_notify(scc, scc->dcd? HWEV_DCD_OFF:HWEV_DCD_ON); 460 } 461 462 /* DCD: on = start to receive packet, off = ABORT condition */ 463 /* (a successfully received packet generates a special condition int) */ 464 465 if((changes & DCD) && !scc->kiss.softdcd) /* DCD input changed state */ 466 { 467 if(status & DCD) /* DCD is now ON */ 468 { 469 start_hunt(scc); 470 scc->dcd = 1; 471 } else { /* DCD is now OFF */ 472 cl(scc,R3,ENT_HM|RxENABLE); /* disable the receiver */ 473 flush_rx_FIFO(scc); 474 scc->dcd = 0; 475 } 476 477 scc_notify(scc, scc->dcd? HWEV_DCD_ON:HWEV_DCD_OFF); 478 } 479 480 #ifdef notdef 481 /* CTS: use external TxDelay (what's that good for?!) 482 * Anyway: If we _could_ use it (BayCom USCC uses CTS for 483 * own purposes) we _should_ use the "autoenable" feature 484 * of the Z8530 and not this interrupt... 485 */ 486 487 if (chg_and_stat & CTS) /* CTS is now ON */ 488 { 489 if (scc->kiss.txdelay == 0) /* zero TXDELAY = wait for CTS */ 490 scc_start_tx_timer(scc, t_txdelay, 0); 491 } 492 #endif 493 494 if (scc->stat.tx_state == TXS_ACTIVE && (status & TxEOM)) 495 { 496 scc->stat.tx_under++; /* oops, an underrun! count 'em */ 497 Outb(scc->ctrl, RES_EXT_INT); /* reset ext/status interrupts */ 498 499 if (scc->tx_buff != NULL) 500 { 501 dev_kfree_skb_irq(scc->tx_buff); 502 scc->tx_buff = NULL; 503 } 504 505 or(scc,R10,ABUNDER); 506 scc_start_tx_timer(scc, t_txdelay, 0); /* restart transmission */ 507 } 508 509 scc->status = status; 510 Outb(scc->ctrl,RES_EXT_INT); 511 } 512 513 514 /* Receiver interrupt handler */ 515 static inline void scc_rxint(struct scc_channel *scc) 516 { 517 struct sk_buff *skb; 518 519 scc->stat.rxints++; 520 521 if((scc->wreg[5] & RTS) && scc->kiss.fulldup == KISS_DUPLEX_HALF) 522 { 523 Inb(scc->data); /* discard char */ 524 or(scc,R3,ENT_HM); /* enter hunt mode for next flag */ 525 return; 526 } 527 528 skb = scc->rx_buff; 529 530 if (skb == NULL) 531 { 532 skb = dev_alloc_skb(scc->stat.bufsize); 533 if (skb == NULL) 534 { 535 scc->dev_stat.rx_dropped++; 536 scc->stat.nospace++; 537 Inb(scc->data); 538 or(scc, R3, ENT_HM); 539 return; 540 } 541 542 scc->rx_buff = skb; 543 *(skb_put(skb, 1)) = 0; /* KISS data */ 544 } 545 546 if (skb->len >= scc->stat.bufsize) 547 { 548 #ifdef notdef 549 printk(KERN_DEBUG "z8530drv: oops, scc_rxint() received huge frame...\n"); 550 #endif 551 dev_kfree_skb_irq(skb); 552 scc->rx_buff = NULL; 553 Inb(scc->data); 554 or(scc, R3, ENT_HM); 555 return; 556 } 557 558 *(skb_put(skb, 1)) = Inb(scc->data); 559 } 560 561 562 /* Receive Special Condition interrupt handler */ 563 static inline void scc_spint(struct scc_channel *scc) 564 { 565 unsigned char status; 566 struct sk_buff *skb; 567 568 scc->stat.spints++; 569 570 status = InReg(scc->ctrl,R1); /* read receiver status */ 571 572 Inb(scc->data); /* throw away Rx byte */ 573 skb = scc->rx_buff; 574 575 if(status & Rx_OVR) /* receiver overrun */ 576 { 577 scc->stat.rx_over++; /* count them */ 578 or(scc,R3,ENT_HM); /* enter hunt mode for next flag */ 579 580 if (skb != NULL) 581 dev_kfree_skb_irq(skb); 582 scc->rx_buff = skb = NULL; 583 } 584 585 if(status & END_FR && skb != NULL) /* end of frame */ 586 { 587 /* CRC okay, frame ends on 8 bit boundary and received something ? */ 588 589 if (!(status & CRC_ERR) && (status & 0xe) == RES8 && skb->len > 0) 590 { 591 /* ignore last received byte (first of the CRC bytes) */ 592 skb_trim(skb, skb->len-1); 593 scc_net_rx(scc, skb); 594 scc->rx_buff = NULL; 595 scc->stat.rxframes++; 596 } else { /* a bad frame */ 597 dev_kfree_skb_irq(skb); 598 scc->rx_buff = NULL; 599 scc->stat.rxerrs++; 600 } 601 } 602 603 Outb(scc->ctrl,ERR_RES); 604 } 605 606 607 /* ----> interrupt service routine for the Z8530 <---- */ 608 609 static void scc_isr_dispatch(struct scc_channel *scc, int vector) 610 { 611 spin_lock(&scc->lock); 612 switch (vector & VECTOR_MASK) 613 { 614 case TXINT: scc_txint(scc); break; 615 case EXINT: scc_exint(scc); break; 616 case RXINT: scc_rxint(scc); break; 617 case SPINT: scc_spint(scc); break; 618 } 619 spin_unlock(&scc->lock); 620 } 621 622 /* If the card has a latch for the interrupt vector (like the PA0HZP card) 623 use it to get the number of the chip that generated the int. 624 If not: poll all defined chips. 625 */ 626 627 #define SCC_IRQTIMEOUT 30000 628 629 static irqreturn_t scc_isr(int irq, void *dev_id) 630 { 631 int chip_irq = (long) dev_id; 632 unsigned char vector; 633 struct scc_channel *scc; 634 struct scc_ctrl *ctrl; 635 int k; 636 637 if (Vector_Latch) 638 { 639 for(k=0; k < SCC_IRQTIMEOUT; k++) 640 { 641 Outb(Vector_Latch, 0); /* Generate INTACK */ 642 643 /* Read the vector */ 644 if((vector=Inb(Vector_Latch)) >= 16 * Nchips) break; 645 if (vector & 0x01) break; 646 647 scc=&SCC_Info[vector >> 3 ^ 0x01]; 648 if (!scc->dev) break; 649 650 scc_isr_dispatch(scc, vector); 651 652 OutReg(scc->ctrl,R0,RES_H_IUS); /* Reset Highest IUS */ 653 } 654 655 if (k == SCC_IRQTIMEOUT) 656 printk(KERN_WARNING "z8530drv: endless loop in scc_isr()?\n"); 657 658 return IRQ_HANDLED; 659 } 660 661 /* Find the SCC generating the interrupt by polling all attached SCCs 662 * reading RR3A (the interrupt pending register) 663 */ 664 665 ctrl = SCC_ctrl; 666 while (ctrl->chan_A) 667 { 668 if (ctrl->irq != chip_irq) 669 { 670 ctrl++; 671 continue; 672 } 673 674 scc = NULL; 675 for (k = 0; InReg(ctrl->chan_A,R3) && k < SCC_IRQTIMEOUT; k++) 676 { 677 vector=InReg(ctrl->chan_B,R2); /* Read the vector */ 678 if (vector & 0x01) break; 679 680 scc = &SCC_Info[vector >> 3 ^ 0x01]; 681 if (!scc->dev) break; 682 683 scc_isr_dispatch(scc, vector); 684 } 685 686 if (k == SCC_IRQTIMEOUT) 687 { 688 printk(KERN_WARNING "z8530drv: endless loop in scc_isr()?!\n"); 689 break; 690 } 691 692 /* This looks weird and it is. At least the BayCom USCC doesn't 693 * use the Interrupt Daisy Chain, thus we'll have to start 694 * all over again to be sure not to miss an interrupt from 695 * (any of) the other chip(s)... 696 * Honestly, the situation *is* braindamaged... 697 */ 698 699 if (scc != NULL) 700 { 701 OutReg(scc->ctrl,R0,RES_H_IUS); 702 ctrl = SCC_ctrl; 703 } else 704 ctrl++; 705 } 706 return IRQ_HANDLED; 707 } 708 709 710 711 /* ******************************************************************** */ 712 /* * Init Channel */ 713 /* ******************************************************************** */ 714 715 716 /* ----> set SCC channel speed <---- */ 717 718 static inline void set_brg(struct scc_channel *scc, unsigned int tc) 719 { 720 cl(scc,R14,BRENABL); /* disable baudrate generator */ 721 wr(scc,R12,tc & 255); /* brg rate LOW */ 722 wr(scc,R13,tc >> 8); /* brg rate HIGH */ 723 or(scc,R14,BRENABL); /* enable baudrate generator */ 724 } 725 726 static inline void set_speed(struct scc_channel *scc) 727 { 728 unsigned long flags; 729 spin_lock_irqsave(&scc->lock, flags); 730 731 if (scc->modem.speed > 0) /* paranoia... */ 732 set_brg(scc, (unsigned) (scc->clock / (scc->modem.speed * 64)) - 2); 733 734 spin_unlock_irqrestore(&scc->lock, flags); 735 } 736 737 738 /* ----> initialize a SCC channel <---- */ 739 740 static inline void init_brg(struct scc_channel *scc) 741 { 742 wr(scc, R14, BRSRC); /* BRG source = PCLK */ 743 OutReg(scc->ctrl, R14, SSBR|scc->wreg[R14]); /* DPLL source = BRG */ 744 OutReg(scc->ctrl, R14, SNRZI|scc->wreg[R14]); /* DPLL NRZI mode */ 745 } 746 747 /* 748 * Initialization according to the Z8530 manual (SGS-Thomson's version): 749 * 750 * 1. Modes and constants 751 * 752 * WR9 11000000 chip reset 753 * WR4 XXXXXXXX Tx/Rx control, async or sync mode 754 * WR1 0XX00X00 select W/REQ (optional) 755 * WR2 XXXXXXXX program interrupt vector 756 * WR3 XXXXXXX0 select Rx control 757 * WR5 XXXX0XXX select Tx control 758 * WR6 XXXXXXXX sync character 759 * WR7 XXXXXXXX sync character 760 * WR9 000X0XXX select interrupt control 761 * WR10 XXXXXXXX miscellaneous control (optional) 762 * WR11 XXXXXXXX clock control 763 * WR12 XXXXXXXX time constant lower byte (optional) 764 * WR13 XXXXXXXX time constant upper byte (optional) 765 * WR14 XXXXXXX0 miscellaneous control 766 * WR14 XXXSSSSS commands (optional) 767 * 768 * 2. Enables 769 * 770 * WR14 000SSSS1 baud rate enable 771 * WR3 SSSSSSS1 Rx enable 772 * WR5 SSSS1SSS Tx enable 773 * WR0 10000000 reset Tx CRG (optional) 774 * WR1 XSS00S00 DMA enable (optional) 775 * 776 * 3. Interrupt status 777 * 778 * WR15 XXXXXXXX enable external/status 779 * WR0 00010000 reset external status 780 * WR0 00010000 reset external status twice 781 * WR1 SSSXXSXX enable Rx, Tx and Ext/status 782 * WR9 000SXSSS enable master interrupt enable 783 * 784 * 1 = set to one, 0 = reset to zero 785 * X = user defined, S = same as previous init 786 * 787 * 788 * Note that the implementation differs in some points from above scheme. 789 * 790 */ 791 792 static void init_channel(struct scc_channel *scc) 793 { 794 del_timer(&scc->tx_t); 795 del_timer(&scc->tx_wdog); 796 797 disable_irq(scc->irq); 798 799 wr(scc,R4,X1CLK|SDLC); /* *1 clock, SDLC mode */ 800 wr(scc,R1,0); /* no W/REQ operation */ 801 wr(scc,R3,Rx8|RxCRC_ENAB); /* RX 8 bits/char, CRC, disabled */ 802 wr(scc,R5,Tx8|DTR|TxCRC_ENAB); /* TX 8 bits/char, disabled, DTR */ 803 wr(scc,R6,0); /* SDLC address zero (not used) */ 804 wr(scc,R7,FLAG); /* SDLC flag value */ 805 wr(scc,R9,VIS); /* vector includes status */ 806 wr(scc,R10,(scc->modem.nrz? NRZ : NRZI)|CRCPS|ABUNDER); /* abort on underrun, preset CRC generator, NRZ(I) */ 807 wr(scc,R14, 0); 808 809 810 /* set clock sources: 811 812 CLK_DPLL: normal halfduplex operation 813 814 RxClk: use DPLL 815 TxClk: use DPLL 816 TRxC mode DPLL output 817 818 CLK_EXTERNAL: external clocking (G3RUH or DF9IC modem) 819 820 BayCom: others: 821 822 TxClk = pin RTxC TxClk = pin TRxC 823 RxClk = pin TRxC RxClk = pin RTxC 824 825 826 CLK_DIVIDER: 827 RxClk = use DPLL 828 TxClk = pin RTxC 829 830 BayCom: others: 831 pin TRxC = DPLL pin TRxC = BRG 832 (RxClk * 1) (RxClk * 32) 833 */ 834 835 836 switch(scc->modem.clocksrc) 837 { 838 case CLK_DPLL: 839 wr(scc, R11, RCDPLL|TCDPLL|TRxCOI|TRxCDP); 840 init_brg(scc); 841 break; 842 843 case CLK_DIVIDER: 844 wr(scc, R11, ((scc->brand & BAYCOM)? TRxCDP : TRxCBR) | RCDPLL|TCRTxCP|TRxCOI); 845 init_brg(scc); 846 break; 847 848 case CLK_EXTERNAL: 849 wr(scc, R11, (scc->brand & BAYCOM)? RCTRxCP|TCRTxCP : RCRTxCP|TCTRxCP); 850 OutReg(scc->ctrl, R14, DISDPLL); 851 break; 852 853 } 854 855 set_speed(scc); /* set baudrate */ 856 857 if(scc->enhanced) 858 { 859 or(scc,R15,SHDLCE|FIFOE); /* enable FIFO, SDLC/HDLC Enhancements (From now R7 is R7') */ 860 wr(scc,R7,AUTOEOM); 861 } 862 863 if(scc->kiss.softdcd || (InReg(scc->ctrl,R0) & DCD)) 864 /* DCD is now ON */ 865 { 866 start_hunt(scc); 867 } 868 869 /* enable ABORT, DCD & SYNC/HUNT interrupts */ 870 871 wr(scc,R15, BRKIE|TxUIE|(scc->kiss.softdcd? SYNCIE:DCDIE)); 872 873 Outb(scc->ctrl,RES_EXT_INT); /* reset ext/status interrupts */ 874 Outb(scc->ctrl,RES_EXT_INT); /* must be done twice */ 875 876 or(scc,R1,INT_ALL_Rx|TxINT_ENAB|EXT_INT_ENAB); /* enable interrupts */ 877 878 scc->status = InReg(scc->ctrl,R0); /* read initial status */ 879 880 or(scc,R9,MIE); /* master interrupt enable */ 881 882 scc_init_timer(scc); 883 884 enable_irq(scc->irq); 885 } 886 887 888 889 890 /* ******************************************************************** */ 891 /* * SCC timer functions * */ 892 /* ******************************************************************** */ 893 894 895 /* ----> scc_key_trx sets the time constant for the baudrate 896 generator and keys the transmitter <---- */ 897 898 static void scc_key_trx(struct scc_channel *scc, char tx) 899 { 900 unsigned int time_const; 901 902 if (scc->brand & PRIMUS) 903 Outb(scc->ctrl + 4, scc->option | (tx? 0x80 : 0)); 904 905 if (scc->modem.speed < 300) 906 scc->modem.speed = 1200; 907 908 time_const = (unsigned) (scc->clock / (scc->modem.speed * (tx? 2:64))) - 2; 909 910 disable_irq(scc->irq); 911 912 if (tx) 913 { 914 or(scc, R1, TxINT_ENAB); /* t_maxkeyup may have reset these */ 915 or(scc, R15, TxUIE); 916 } 917 918 if (scc->modem.clocksrc == CLK_DPLL) 919 { /* force simplex operation */ 920 if (tx) 921 { 922 #ifdef CONFIG_SCC_TRXECHO 923 cl(scc, R3, RxENABLE|ENT_HM); /* switch off receiver */ 924 cl(scc, R15, DCDIE|SYNCIE); /* No DCD changes, please */ 925 #endif 926 set_brg(scc, time_const); /* reprogram baudrate generator */ 927 928 /* DPLL -> Rx clk, BRG -> Tx CLK, TRxC mode output, TRxC = BRG */ 929 wr(scc, R11, RCDPLL|TCBR|TRxCOI|TRxCBR); 930 931 /* By popular demand: tx_inhibit */ 932 if (scc->kiss.tx_inhibit) 933 { 934 or(scc,R5, TxENAB); 935 scc->wreg[R5] |= RTS; 936 } else { 937 or(scc,R5,RTS|TxENAB); /* set the RTS line and enable TX */ 938 } 939 } else { 940 cl(scc,R5,RTS|TxENAB); 941 942 set_brg(scc, time_const); /* reprogram baudrate generator */ 943 944 /* DPLL -> Rx clk, DPLL -> Tx CLK, TRxC mode output, TRxC = DPLL */ 945 wr(scc, R11, RCDPLL|TCDPLL|TRxCOI|TRxCDP); 946 947 #ifndef CONFIG_SCC_TRXECHO 948 if (scc->kiss.softdcd) 949 #endif 950 { 951 or(scc,R15, scc->kiss.softdcd? SYNCIE:DCDIE); 952 start_hunt(scc); 953 } 954 } 955 } else { 956 if (tx) 957 { 958 #ifdef CONFIG_SCC_TRXECHO 959 if (scc->kiss.fulldup == KISS_DUPLEX_HALF) 960 { 961 cl(scc, R3, RxENABLE); 962 cl(scc, R15, DCDIE|SYNCIE); 963 } 964 #endif 965 966 if (scc->kiss.tx_inhibit) 967 { 968 or(scc,R5, TxENAB); 969 scc->wreg[R5] |= RTS; 970 } else { 971 or(scc,R5,RTS|TxENAB); /* enable tx */ 972 } 973 } else { 974 cl(scc,R5,RTS|TxENAB); /* disable tx */ 975 976 if ((scc->kiss.fulldup == KISS_DUPLEX_HALF) && 977 #ifndef CONFIG_SCC_TRXECHO 978 scc->kiss.softdcd) 979 #else 980 1) 981 #endif 982 { 983 or(scc, R15, scc->kiss.softdcd? SYNCIE:DCDIE); 984 start_hunt(scc); 985 } 986 } 987 } 988 989 enable_irq(scc->irq); 990 } 991 992 993 /* ----> SCC timer interrupt handler and friends. <---- */ 994 995 static void __scc_start_tx_timer(struct scc_channel *scc, void (*handler)(unsigned long), unsigned long when) 996 { 997 del_timer(&scc->tx_t); 998 999 if (when == 0) 1000 { 1001 handler((unsigned long) scc); 1002 } else 1003 if (when != TIMER_OFF) 1004 { 1005 scc->tx_t.data = (unsigned long) scc; 1006 scc->tx_t.function = handler; 1007 scc->tx_t.expires = jiffies + (when*HZ)/100; 1008 add_timer(&scc->tx_t); 1009 } 1010 } 1011 1012 static void scc_start_tx_timer(struct scc_channel *scc, void (*handler)(unsigned long), unsigned long when) 1013 { 1014 unsigned long flags; 1015 1016 spin_lock_irqsave(&scc->lock, flags); 1017 __scc_start_tx_timer(scc, handler, when); 1018 spin_unlock_irqrestore(&scc->lock, flags); 1019 } 1020 1021 static void scc_start_defer(struct scc_channel *scc) 1022 { 1023 unsigned long flags; 1024 1025 spin_lock_irqsave(&scc->lock, flags); 1026 del_timer(&scc->tx_wdog); 1027 1028 if (scc->kiss.maxdefer != 0 && scc->kiss.maxdefer != TIMER_OFF) 1029 { 1030 scc->tx_wdog.data = (unsigned long) scc; 1031 scc->tx_wdog.function = t_busy; 1032 scc->tx_wdog.expires = jiffies + HZ*scc->kiss.maxdefer; 1033 add_timer(&scc->tx_wdog); 1034 } 1035 spin_unlock_irqrestore(&scc->lock, flags); 1036 } 1037 1038 static void scc_start_maxkeyup(struct scc_channel *scc) 1039 { 1040 unsigned long flags; 1041 1042 spin_lock_irqsave(&scc->lock, flags); 1043 del_timer(&scc->tx_wdog); 1044 1045 if (scc->kiss.maxkeyup != 0 && scc->kiss.maxkeyup != TIMER_OFF) 1046 { 1047 scc->tx_wdog.data = (unsigned long) scc; 1048 scc->tx_wdog.function = t_maxkeyup; 1049 scc->tx_wdog.expires = jiffies + HZ*scc->kiss.maxkeyup; 1050 add_timer(&scc->tx_wdog); 1051 } 1052 spin_unlock_irqrestore(&scc->lock, flags); 1053 } 1054 1055 /* 1056 * This is called from scc_txint() when there are no more frames to send. 1057 * Not exactly a timer function, but it is a close friend of the family... 1058 */ 1059 1060 static void scc_tx_done(struct scc_channel *scc) 1061 { 1062 /* 1063 * trx remains keyed in fulldup mode 2 until t_idle expires. 1064 */ 1065 1066 switch (scc->kiss.fulldup) 1067 { 1068 case KISS_DUPLEX_LINK: 1069 scc->stat.tx_state = TXS_IDLE2; 1070 if (scc->kiss.idletime != TIMER_OFF) 1071 scc_start_tx_timer(scc, t_idle, 1072 scc->kiss.idletime*100); 1073 break; 1074 case KISS_DUPLEX_OPTIMA: 1075 scc_notify(scc, HWEV_ALL_SENT); 1076 break; 1077 default: 1078 scc->stat.tx_state = TXS_BUSY; 1079 scc_start_tx_timer(scc, t_tail, scc->kiss.tailtime); 1080 } 1081 1082 netif_wake_queue(scc->dev); 1083 } 1084 1085 1086 static unsigned char Rand = 17; 1087 1088 static inline int is_grouped(struct scc_channel *scc) 1089 { 1090 int k; 1091 struct scc_channel *scc2; 1092 unsigned char grp1, grp2; 1093 1094 grp1 = scc->kiss.group; 1095 1096 for (k = 0; k < (Nchips * 2); k++) 1097 { 1098 scc2 = &SCC_Info[k]; 1099 grp2 = scc2->kiss.group; 1100 1101 if (scc2 == scc || !(scc2->dev && grp2)) 1102 continue; 1103 1104 if ((grp1 & 0x3f) == (grp2 & 0x3f)) 1105 { 1106 if ( (grp1 & TXGROUP) && (scc2->wreg[R5] & RTS) ) 1107 return 1; 1108 1109 if ( (grp1 & RXGROUP) && scc2->dcd ) 1110 return 1; 1111 } 1112 } 1113 return 0; 1114 } 1115 1116 /* DWAIT and SLOTTIME expired 1117 * 1118 * fulldup == 0: DCD is active or Rand > P-persistence: start t_busy timer 1119 * else key trx and start txdelay 1120 * fulldup == 1: key trx and start txdelay 1121 * fulldup == 2: mintime expired, reset status or key trx and start txdelay 1122 */ 1123 1124 static void t_dwait(unsigned long channel) 1125 { 1126 struct scc_channel *scc = (struct scc_channel *) channel; 1127 1128 if (scc->stat.tx_state == TXS_WAIT) /* maxkeyup or idle timeout */ 1129 { 1130 if (skb_queue_empty(&scc->tx_queue)) { /* nothing to send */ 1131 scc->stat.tx_state = TXS_IDLE; 1132 netif_wake_queue(scc->dev); /* t_maxkeyup locked it. */ 1133 return; 1134 } 1135 1136 scc->stat.tx_state = TXS_BUSY; 1137 } 1138 1139 if (scc->kiss.fulldup == KISS_DUPLEX_HALF) 1140 { 1141 Rand = Rand * 17 + 31; 1142 1143 if (scc->dcd || (scc->kiss.persist) < Rand || (scc->kiss.group && is_grouped(scc)) ) 1144 { 1145 scc_start_defer(scc); 1146 scc_start_tx_timer(scc, t_dwait, scc->kiss.slottime); 1147 return ; 1148 } 1149 } 1150 1151 if ( !(scc->wreg[R5] & RTS) ) 1152 { 1153 scc_key_trx(scc, TX_ON); 1154 scc_start_tx_timer(scc, t_txdelay, scc->kiss.txdelay); 1155 } else { 1156 scc_start_tx_timer(scc, t_txdelay, 0); 1157 } 1158 } 1159 1160 1161 /* TXDELAY expired 1162 * 1163 * kick transmission by a fake scc_txint(scc), start 'maxkeyup' watchdog. 1164 */ 1165 1166 static void t_txdelay(unsigned long channel) 1167 { 1168 struct scc_channel *scc = (struct scc_channel *) channel; 1169 1170 scc_start_maxkeyup(scc); 1171 1172 if (scc->tx_buff == NULL) 1173 { 1174 disable_irq(scc->irq); 1175 scc_txint(scc); 1176 enable_irq(scc->irq); 1177 } 1178 } 1179 1180 1181 /* TAILTIME expired 1182 * 1183 * switch off transmitter. If we were stopped by Maxkeyup restart 1184 * transmission after 'mintime' seconds 1185 */ 1186 1187 static void t_tail(unsigned long channel) 1188 { 1189 struct scc_channel *scc = (struct scc_channel *) channel; 1190 unsigned long flags; 1191 1192 spin_lock_irqsave(&scc->lock, flags); 1193 del_timer(&scc->tx_wdog); 1194 scc_key_trx(scc, TX_OFF); 1195 spin_unlock_irqrestore(&scc->lock, flags); 1196 1197 if (scc->stat.tx_state == TXS_TIMEOUT) /* we had a timeout? */ 1198 { 1199 scc->stat.tx_state = TXS_WAIT; 1200 scc_start_tx_timer(scc, t_dwait, scc->kiss.mintime*100); 1201 return; 1202 } 1203 1204 scc->stat.tx_state = TXS_IDLE; 1205 netif_wake_queue(scc->dev); 1206 } 1207 1208 1209 /* BUSY timeout 1210 * 1211 * throw away send buffers if DCD remains active too long. 1212 */ 1213 1214 static void t_busy(unsigned long channel) 1215 { 1216 struct scc_channel *scc = (struct scc_channel *) channel; 1217 1218 del_timer(&scc->tx_t); 1219 netif_stop_queue(scc->dev); /* don't pile on the wabbit! */ 1220 1221 scc_discard_buffers(scc); 1222 scc->stat.txerrs++; 1223 scc->stat.tx_state = TXS_IDLE; 1224 1225 netif_wake_queue(scc->dev); 1226 } 1227 1228 /* MAXKEYUP timeout 1229 * 1230 * this is our watchdog. 1231 */ 1232 1233 static void t_maxkeyup(unsigned long channel) 1234 { 1235 struct scc_channel *scc = (struct scc_channel *) channel; 1236 unsigned long flags; 1237 1238 spin_lock_irqsave(&scc->lock, flags); 1239 /* 1240 * let things settle down before we start to 1241 * accept new data. 1242 */ 1243 1244 netif_stop_queue(scc->dev); 1245 scc_discard_buffers(scc); 1246 1247 del_timer(&scc->tx_t); 1248 1249 cl(scc, R1, TxINT_ENAB); /* force an ABORT, but don't */ 1250 cl(scc, R15, TxUIE); /* count it. */ 1251 OutReg(scc->ctrl, R0, RES_Tx_P); 1252 1253 spin_unlock_irqrestore(&scc->lock, flags); 1254 1255 scc->stat.txerrs++; 1256 scc->stat.tx_state = TXS_TIMEOUT; 1257 scc_start_tx_timer(scc, t_tail, scc->kiss.tailtime); 1258 } 1259 1260 /* IDLE timeout 1261 * 1262 * in fulldup mode 2 it keys down the transmitter after 'idle' seconds 1263 * of inactivity. We will not restart transmission before 'mintime' 1264 * expires. 1265 */ 1266 1267 static void t_idle(unsigned long channel) 1268 { 1269 struct scc_channel *scc = (struct scc_channel *) channel; 1270 1271 del_timer(&scc->tx_wdog); 1272 1273 scc_key_trx(scc, TX_OFF); 1274 if(scc->kiss.mintime) 1275 scc_start_tx_timer(scc, t_dwait, scc->kiss.mintime*100); 1276 scc->stat.tx_state = TXS_WAIT; 1277 } 1278 1279 static void scc_init_timer(struct scc_channel *scc) 1280 { 1281 unsigned long flags; 1282 1283 spin_lock_irqsave(&scc->lock, flags); 1284 scc->stat.tx_state = TXS_IDLE; 1285 spin_unlock_irqrestore(&scc->lock, flags); 1286 } 1287 1288 1289 /* ******************************************************************** */ 1290 /* * Set/get L1 parameters * */ 1291 /* ******************************************************************** */ 1292 1293 1294 /* 1295 * this will set the "hardware" parameters through KISS commands or ioctl() 1296 */ 1297 1298 #define CAST(x) (unsigned long)(x) 1299 1300 static unsigned int scc_set_param(struct scc_channel *scc, unsigned int cmd, unsigned int arg) 1301 { 1302 switch (cmd) 1303 { 1304 case PARAM_TXDELAY: scc->kiss.txdelay=arg; break; 1305 case PARAM_PERSIST: scc->kiss.persist=arg; break; 1306 case PARAM_SLOTTIME: scc->kiss.slottime=arg; break; 1307 case PARAM_TXTAIL: scc->kiss.tailtime=arg; break; 1308 case PARAM_FULLDUP: scc->kiss.fulldup=arg; break; 1309 case PARAM_DTR: break; /* does someone need this? */ 1310 case PARAM_GROUP: scc->kiss.group=arg; break; 1311 case PARAM_IDLE: scc->kiss.idletime=arg; break; 1312 case PARAM_MIN: scc->kiss.mintime=arg; break; 1313 case PARAM_MAXKEY: scc->kiss.maxkeyup=arg; break; 1314 case PARAM_WAIT: scc->kiss.waittime=arg; break; 1315 case PARAM_MAXDEFER: scc->kiss.maxdefer=arg; break; 1316 case PARAM_TX: scc->kiss.tx_inhibit=arg; break; 1317 1318 case PARAM_SOFTDCD: 1319 scc->kiss.softdcd=arg; 1320 if (arg) 1321 { 1322 or(scc, R15, SYNCIE); 1323 cl(scc, R15, DCDIE); 1324 start_hunt(scc); 1325 } else { 1326 or(scc, R15, DCDIE); 1327 cl(scc, R15, SYNCIE); 1328 } 1329 break; 1330 1331 case PARAM_SPEED: 1332 if (arg < 256) 1333 scc->modem.speed=arg*100; 1334 else 1335 scc->modem.speed=arg; 1336 1337 if (scc->stat.tx_state == 0) /* only switch baudrate on rx... ;-) */ 1338 set_speed(scc); 1339 break; 1340 1341 case PARAM_RTS: 1342 if ( !(scc->wreg[R5] & RTS) ) 1343 { 1344 if (arg != TX_OFF) { 1345 scc_key_trx(scc, TX_ON); 1346 scc_start_tx_timer(scc, t_txdelay, scc->kiss.txdelay); 1347 } 1348 } else { 1349 if (arg == TX_OFF) 1350 { 1351 scc->stat.tx_state = TXS_BUSY; 1352 scc_start_tx_timer(scc, t_tail, scc->kiss.tailtime); 1353 } 1354 } 1355 break; 1356 1357 case PARAM_HWEVENT: 1358 scc_notify(scc, scc->dcd? HWEV_DCD_ON:HWEV_DCD_OFF); 1359 break; 1360 1361 default: return -EINVAL; 1362 } 1363 1364 return 0; 1365 } 1366 1367 1368 1369 static unsigned long scc_get_param(struct scc_channel *scc, unsigned int cmd) 1370 { 1371 switch (cmd) 1372 { 1373 case PARAM_TXDELAY: return CAST(scc->kiss.txdelay); 1374 case PARAM_PERSIST: return CAST(scc->kiss.persist); 1375 case PARAM_SLOTTIME: return CAST(scc->kiss.slottime); 1376 case PARAM_TXTAIL: return CAST(scc->kiss.tailtime); 1377 case PARAM_FULLDUP: return CAST(scc->kiss.fulldup); 1378 case PARAM_SOFTDCD: return CAST(scc->kiss.softdcd); 1379 case PARAM_DTR: return CAST((scc->wreg[R5] & DTR)? 1:0); 1380 case PARAM_RTS: return CAST((scc->wreg[R5] & RTS)? 1:0); 1381 case PARAM_SPEED: return CAST(scc->modem.speed); 1382 case PARAM_GROUP: return CAST(scc->kiss.group); 1383 case PARAM_IDLE: return CAST(scc->kiss.idletime); 1384 case PARAM_MIN: return CAST(scc->kiss.mintime); 1385 case PARAM_MAXKEY: return CAST(scc->kiss.maxkeyup); 1386 case PARAM_WAIT: return CAST(scc->kiss.waittime); 1387 case PARAM_MAXDEFER: return CAST(scc->kiss.maxdefer); 1388 case PARAM_TX: return CAST(scc->kiss.tx_inhibit); 1389 default: return NO_SUCH_PARAM; 1390 } 1391 1392 } 1393 1394 #undef CAST 1395 1396 /* ******************************************************************* */ 1397 /* * Send calibration pattern * */ 1398 /* ******************************************************************* */ 1399 1400 static void scc_stop_calibrate(unsigned long channel) 1401 { 1402 struct scc_channel *scc = (struct scc_channel *) channel; 1403 unsigned long flags; 1404 1405 spin_lock_irqsave(&scc->lock, flags); 1406 del_timer(&scc->tx_wdog); 1407 scc_key_trx(scc, TX_OFF); 1408 wr(scc, R6, 0); 1409 wr(scc, R7, FLAG); 1410 Outb(scc->ctrl,RES_EXT_INT); /* reset ext/status interrupts */ 1411 Outb(scc->ctrl,RES_EXT_INT); 1412 1413 netif_wake_queue(scc->dev); 1414 spin_unlock_irqrestore(&scc->lock, flags); 1415 } 1416 1417 1418 static void 1419 scc_start_calibrate(struct scc_channel *scc, int duration, unsigned char pattern) 1420 { 1421 unsigned long flags; 1422 1423 spin_lock_irqsave(&scc->lock, flags); 1424 netif_stop_queue(scc->dev); 1425 scc_discard_buffers(scc); 1426 1427 del_timer(&scc->tx_wdog); 1428 1429 scc->tx_wdog.data = (unsigned long) scc; 1430 scc->tx_wdog.function = scc_stop_calibrate; 1431 scc->tx_wdog.expires = jiffies + HZ*duration; 1432 add_timer(&scc->tx_wdog); 1433 1434 /* This doesn't seem to work. Why not? */ 1435 wr(scc, R6, 0); 1436 wr(scc, R7, pattern); 1437 1438 /* 1439 * Don't know if this works. 1440 * Damn, where is my Z8530 programming manual...? 1441 */ 1442 1443 Outb(scc->ctrl,RES_EXT_INT); /* reset ext/status interrupts */ 1444 Outb(scc->ctrl,RES_EXT_INT); 1445 1446 scc_key_trx(scc, TX_ON); 1447 spin_unlock_irqrestore(&scc->lock, flags); 1448 } 1449 1450 /* ******************************************************************* */ 1451 /* * Init channel structures, special HW, etc... * */ 1452 /* ******************************************************************* */ 1453 1454 /* 1455 * Reset the Z8530s and setup special hardware 1456 */ 1457 1458 static void z8530_init(void) 1459 { 1460 struct scc_channel *scc; 1461 int chip, k; 1462 unsigned long flags; 1463 char *flag; 1464 1465 1466 printk(KERN_INFO "Init Z8530 driver: %u channels, IRQ", Nchips*2); 1467 1468 flag=" "; 1469 for (k = 0; k < nr_irqs; k++) 1470 if (Ivec[k].used) 1471 { 1472 printk("%s%d", flag, k); 1473 flag=","; 1474 } 1475 printk("\n"); 1476 1477 1478 /* reset and pre-init all chips in the system */ 1479 for (chip = 0; chip < Nchips; chip++) 1480 { 1481 scc=&SCC_Info[2*chip]; 1482 if (!scc->ctrl) continue; 1483 1484 /* Special SCC cards */ 1485 1486 if(scc->brand & EAGLE) /* this is an EAGLE card */ 1487 Outb(scc->special,0x08); /* enable interrupt on the board */ 1488 1489 if(scc->brand & (PC100 | PRIMUS)) /* this is a PC100/PRIMUS card */ 1490 Outb(scc->special,scc->option); /* set the MODEM mode (0x22) */ 1491 1492 1493 /* Reset and pre-init Z8530 */ 1494 1495 spin_lock_irqsave(&scc->lock, flags); 1496 1497 Outb(scc->ctrl, 0); 1498 OutReg(scc->ctrl,R9,FHWRES); /* force hardware reset */ 1499 udelay(100); /* give it 'a bit' more time than required */ 1500 wr(scc, R2, chip*16); /* interrupt vector */ 1501 wr(scc, R9, VIS); /* vector includes status */ 1502 spin_unlock_irqrestore(&scc->lock, flags); 1503 } 1504 1505 1506 Driver_Initialized = 1; 1507 } 1508 1509 /* 1510 * Allocate device structure, err, instance, and register driver 1511 */ 1512 1513 static int scc_net_alloc(const char *name, struct scc_channel *scc) 1514 { 1515 int err; 1516 struct net_device *dev; 1517 1518 dev = alloc_netdev(0, name, scc_net_setup); 1519 if (!dev) 1520 return -ENOMEM; 1521 1522 dev->ml_priv = scc; 1523 scc->dev = dev; 1524 spin_lock_init(&scc->lock); 1525 init_timer(&scc->tx_t); 1526 init_timer(&scc->tx_wdog); 1527 1528 err = register_netdevice(dev); 1529 if (err) { 1530 printk(KERN_ERR "%s: can't register network device (%d)\n", 1531 name, err); 1532 free_netdev(dev); 1533 scc->dev = NULL; 1534 return err; 1535 } 1536 1537 return 0; 1538 } 1539 1540 1541 1542 /* ******************************************************************** */ 1543 /* * Network driver methods * */ 1544 /* ******************************************************************** */ 1545 1546 static const struct net_device_ops scc_netdev_ops = { 1547 .ndo_open = scc_net_open, 1548 .ndo_stop = scc_net_close, 1549 .ndo_start_xmit = scc_net_tx, 1550 .ndo_set_mac_address = scc_net_set_mac_address, 1551 .ndo_get_stats = scc_net_get_stats, 1552 .ndo_do_ioctl = scc_net_ioctl, 1553 }; 1554 1555 /* ----> Initialize device <----- */ 1556 1557 static void scc_net_setup(struct net_device *dev) 1558 { 1559 dev->tx_queue_len = 16; /* should be enough... */ 1560 1561 dev->netdev_ops = &scc_netdev_ops; 1562 dev->header_ops = &ax25_header_ops; 1563 1564 memcpy(dev->broadcast, &ax25_bcast, AX25_ADDR_LEN); 1565 memcpy(dev->dev_addr, &ax25_defaddr, AX25_ADDR_LEN); 1566 1567 dev->flags = 0; 1568 1569 dev->type = ARPHRD_AX25; 1570 dev->hard_header_len = AX25_MAX_HEADER_LEN + AX25_BPQ_HEADER_LEN; 1571 dev->mtu = AX25_DEF_PACLEN; 1572 dev->addr_len = AX25_ADDR_LEN; 1573 1574 } 1575 1576 /* ----> open network device <---- */ 1577 1578 static int scc_net_open(struct net_device *dev) 1579 { 1580 struct scc_channel *scc = (struct scc_channel *) dev->ml_priv; 1581 1582 if (!scc->init) 1583 return -EINVAL; 1584 1585 scc->tx_buff = NULL; 1586 skb_queue_head_init(&scc->tx_queue); 1587 1588 init_channel(scc); 1589 1590 netif_start_queue(dev); 1591 return 0; 1592 } 1593 1594 /* ----> close network device <---- */ 1595 1596 static int scc_net_close(struct net_device *dev) 1597 { 1598 struct scc_channel *scc = (struct scc_channel *) dev->ml_priv; 1599 unsigned long flags; 1600 1601 netif_stop_queue(dev); 1602 1603 spin_lock_irqsave(&scc->lock, flags); 1604 Outb(scc->ctrl,0); /* Make sure pointer is written */ 1605 wr(scc,R1,0); /* disable interrupts */ 1606 wr(scc,R3,0); 1607 spin_unlock_irqrestore(&scc->lock, flags); 1608 1609 del_timer_sync(&scc->tx_t); 1610 del_timer_sync(&scc->tx_wdog); 1611 1612 scc_discard_buffers(scc); 1613 1614 return 0; 1615 } 1616 1617 /* ----> receive frame, called from scc_rxint() <---- */ 1618 1619 static void scc_net_rx(struct scc_channel *scc, struct sk_buff *skb) 1620 { 1621 if (skb->len == 0) { 1622 dev_kfree_skb_irq(skb); 1623 return; 1624 } 1625 1626 scc->dev_stat.rx_packets++; 1627 scc->dev_stat.rx_bytes += skb->len; 1628 1629 skb->protocol = ax25_type_trans(skb, scc->dev); 1630 1631 netif_rx(skb); 1632 } 1633 1634 /* ----> transmit frame <---- */ 1635 1636 static netdev_tx_t scc_net_tx(struct sk_buff *skb, struct net_device *dev) 1637 { 1638 struct scc_channel *scc = (struct scc_channel *) dev->ml_priv; 1639 unsigned long flags; 1640 char kisscmd; 1641 1642 if (skb->len > scc->stat.bufsize || skb->len < 2) { 1643 scc->dev_stat.tx_dropped++; /* bogus frame */ 1644 dev_kfree_skb(skb); 1645 return NETDEV_TX_OK; 1646 } 1647 1648 scc->dev_stat.tx_packets++; 1649 scc->dev_stat.tx_bytes += skb->len; 1650 scc->stat.txframes++; 1651 1652 kisscmd = *skb->data & 0x1f; 1653 skb_pull(skb, 1); 1654 1655 if (kisscmd) { 1656 scc_set_param(scc, kisscmd, *skb->data); 1657 dev_kfree_skb(skb); 1658 return NETDEV_TX_OK; 1659 } 1660 1661 spin_lock_irqsave(&scc->lock, flags); 1662 1663 if (skb_queue_len(&scc->tx_queue) > scc->dev->tx_queue_len) { 1664 struct sk_buff *skb_del; 1665 skb_del = skb_dequeue(&scc->tx_queue); 1666 dev_kfree_skb(skb_del); 1667 } 1668 skb_queue_tail(&scc->tx_queue, skb); 1669 dev->trans_start = jiffies; 1670 1671 1672 /* 1673 * Start transmission if the trx state is idle or 1674 * t_idle hasn't expired yet. Use dwait/persistence/slottime 1675 * algorithm for normal halfduplex operation. 1676 */ 1677 1678 if(scc->stat.tx_state == TXS_IDLE || scc->stat.tx_state == TXS_IDLE2) { 1679 scc->stat.tx_state = TXS_BUSY; 1680 if (scc->kiss.fulldup == KISS_DUPLEX_HALF) 1681 __scc_start_tx_timer(scc, t_dwait, scc->kiss.waittime); 1682 else 1683 __scc_start_tx_timer(scc, t_dwait, 0); 1684 } 1685 spin_unlock_irqrestore(&scc->lock, flags); 1686 return NETDEV_TX_OK; 1687 } 1688 1689 /* ----> ioctl functions <---- */ 1690 1691 /* 1692 * SIOCSCCCFG - configure driver arg: (struct scc_hw_config *) arg 1693 * SIOCSCCINI - initialize driver arg: --- 1694 * SIOCSCCCHANINI - initialize channel arg: (struct scc_modem *) arg 1695 * SIOCSCCSMEM - set memory arg: (struct scc_mem_config *) arg 1696 * SIOCSCCGKISS - get level 1 parameter arg: (struct scc_kiss_cmd *) arg 1697 * SIOCSCCSKISS - set level 1 parameter arg: (struct scc_kiss_cmd *) arg 1698 * SIOCSCCGSTAT - get driver status arg: (struct scc_stat *) arg 1699 * SIOCSCCCAL - send calib. pattern arg: (struct scc_calibrate *) arg 1700 */ 1701 1702 static int scc_net_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd) 1703 { 1704 struct scc_kiss_cmd kiss_cmd; 1705 struct scc_mem_config memcfg; 1706 struct scc_hw_config hwcfg; 1707 struct scc_calibrate cal; 1708 struct scc_channel *scc = (struct scc_channel *) dev->ml_priv; 1709 int chan; 1710 unsigned char device_name[IFNAMSIZ]; 1711 void __user *arg = ifr->ifr_data; 1712 1713 1714 if (!Driver_Initialized) 1715 { 1716 if (cmd == SIOCSCCCFG) 1717 { 1718 int found = 1; 1719 1720 if (!capable(CAP_SYS_RAWIO)) return -EPERM; 1721 if (!arg) return -EFAULT; 1722 1723 if (Nchips >= SCC_MAXCHIPS) 1724 return -EINVAL; 1725 1726 if (copy_from_user(&hwcfg, arg, sizeof(hwcfg))) 1727 return -EFAULT; 1728 1729 if (hwcfg.irq == 2) hwcfg.irq = 9; 1730 1731 if (hwcfg.irq < 0 || hwcfg.irq >= nr_irqs) 1732 return -EINVAL; 1733 1734 if (!Ivec[hwcfg.irq].used && hwcfg.irq) 1735 { 1736 if (request_irq(hwcfg.irq, scc_isr, 1737 IRQF_DISABLED, "AX.25 SCC", 1738 (void *)(long) hwcfg.irq)) 1739 printk(KERN_WARNING "z8530drv: warning, cannot get IRQ %d\n", hwcfg.irq); 1740 else 1741 Ivec[hwcfg.irq].used = 1; 1742 } 1743 1744 if (hwcfg.vector_latch && !Vector_Latch) { 1745 if (!request_region(hwcfg.vector_latch, 1, "scc vector latch")) 1746 printk(KERN_WARNING "z8530drv: warning, cannot reserve vector latch port 0x%lx\n, disabled.", hwcfg.vector_latch); 1747 else 1748 Vector_Latch = hwcfg.vector_latch; 1749 } 1750 1751 if (hwcfg.clock == 0) 1752 hwcfg.clock = SCC_DEFAULT_CLOCK; 1753 1754 #ifndef SCC_DONT_CHECK 1755 1756 if(request_region(hwcfg.ctrl_a, 1, "scc-probe")) 1757 { 1758 disable_irq(hwcfg.irq); 1759 Outb(hwcfg.ctrl_a, 0); 1760 OutReg(hwcfg.ctrl_a, R9, FHWRES); 1761 udelay(100); 1762 OutReg(hwcfg.ctrl_a,R13,0x55); /* is this chip really there? */ 1763 udelay(5); 1764 1765 if (InReg(hwcfg.ctrl_a,R13) != 0x55) 1766 found = 0; 1767 enable_irq(hwcfg.irq); 1768 release_region(hwcfg.ctrl_a, 1); 1769 } 1770 else 1771 found = 0; 1772 #endif 1773 1774 if (found) 1775 { 1776 SCC_Info[2*Nchips ].ctrl = hwcfg.ctrl_a; 1777 SCC_Info[2*Nchips ].data = hwcfg.data_a; 1778 SCC_Info[2*Nchips ].irq = hwcfg.irq; 1779 SCC_Info[2*Nchips+1].ctrl = hwcfg.ctrl_b; 1780 SCC_Info[2*Nchips+1].data = hwcfg.data_b; 1781 SCC_Info[2*Nchips+1].irq = hwcfg.irq; 1782 1783 SCC_ctrl[Nchips].chan_A = hwcfg.ctrl_a; 1784 SCC_ctrl[Nchips].chan_B = hwcfg.ctrl_b; 1785 SCC_ctrl[Nchips].irq = hwcfg.irq; 1786 } 1787 1788 1789 for (chan = 0; chan < 2; chan++) 1790 { 1791 sprintf(device_name, "%s%i", SCC_DriverName, 2*Nchips+chan); 1792 1793 SCC_Info[2*Nchips+chan].special = hwcfg.special; 1794 SCC_Info[2*Nchips+chan].clock = hwcfg.clock; 1795 SCC_Info[2*Nchips+chan].brand = hwcfg.brand; 1796 SCC_Info[2*Nchips+chan].option = hwcfg.option; 1797 SCC_Info[2*Nchips+chan].enhanced = hwcfg.escc; 1798 1799 #ifdef SCC_DONT_CHECK 1800 printk(KERN_INFO "%s: data port = 0x%3.3x control port = 0x%3.3x\n", 1801 device_name, 1802 SCC_Info[2*Nchips+chan].data, 1803 SCC_Info[2*Nchips+chan].ctrl); 1804 1805 #else 1806 printk(KERN_INFO "%s: data port = 0x%3.3lx control port = 0x%3.3lx -- %s\n", 1807 device_name, 1808 chan? hwcfg.data_b : hwcfg.data_a, 1809 chan? hwcfg.ctrl_b : hwcfg.ctrl_a, 1810 found? "found" : "missing"); 1811 #endif 1812 1813 if (found) 1814 { 1815 request_region(SCC_Info[2*Nchips+chan].ctrl, 1, "scc ctrl"); 1816 request_region(SCC_Info[2*Nchips+chan].data, 1, "scc data"); 1817 if (Nchips+chan != 0 && 1818 scc_net_alloc(device_name, 1819 &SCC_Info[2*Nchips+chan])) 1820 return -EINVAL; 1821 } 1822 } 1823 1824 if (found) Nchips++; 1825 1826 return 0; 1827 } 1828 1829 if (cmd == SIOCSCCINI) 1830 { 1831 if (!capable(CAP_SYS_RAWIO)) 1832 return -EPERM; 1833 1834 if (Nchips == 0) 1835 return -EINVAL; 1836 1837 z8530_init(); 1838 return 0; 1839 } 1840 1841 return -EINVAL; /* confuse the user */ 1842 } 1843 1844 if (!scc->init) 1845 { 1846 if (cmd == SIOCSCCCHANINI) 1847 { 1848 if (!capable(CAP_NET_ADMIN)) return -EPERM; 1849 if (!arg) return -EINVAL; 1850 1851 scc->stat.bufsize = SCC_BUFSIZE; 1852 1853 if (copy_from_user(&scc->modem, arg, sizeof(struct scc_modem))) 1854 return -EINVAL; 1855 1856 /* default KISS Params */ 1857 1858 if (scc->modem.speed < 4800) 1859 { 1860 scc->kiss.txdelay = 36; /* 360 ms */ 1861 scc->kiss.persist = 42; /* 25% persistence */ /* was 25 */ 1862 scc->kiss.slottime = 16; /* 160 ms */ 1863 scc->kiss.tailtime = 4; /* minimal reasonable value */ 1864 scc->kiss.fulldup = 0; /* CSMA */ 1865 scc->kiss.waittime = 50; /* 500 ms */ 1866 scc->kiss.maxkeyup = 10; /* 10 s */ 1867 scc->kiss.mintime = 3; /* 3 s */ 1868 scc->kiss.idletime = 30; /* 30 s */ 1869 scc->kiss.maxdefer = 120; /* 2 min */ 1870 scc->kiss.softdcd = 0; /* hardware dcd */ 1871 } else { 1872 scc->kiss.txdelay = 10; /* 100 ms */ 1873 scc->kiss.persist = 64; /* 25% persistence */ /* was 25 */ 1874 scc->kiss.slottime = 8; /* 160 ms */ 1875 scc->kiss.tailtime = 1; /* minimal reasonable value */ 1876 scc->kiss.fulldup = 0; /* CSMA */ 1877 scc->kiss.waittime = 50; /* 500 ms */ 1878 scc->kiss.maxkeyup = 7; /* 7 s */ 1879 scc->kiss.mintime = 3; /* 3 s */ 1880 scc->kiss.idletime = 30; /* 30 s */ 1881 scc->kiss.maxdefer = 120; /* 2 min */ 1882 scc->kiss.softdcd = 0; /* hardware dcd */ 1883 } 1884 1885 scc->tx_buff = NULL; 1886 skb_queue_head_init(&scc->tx_queue); 1887 scc->init = 1; 1888 1889 return 0; 1890 } 1891 1892 return -EINVAL; 1893 } 1894 1895 switch(cmd) 1896 { 1897 case SIOCSCCRESERVED: 1898 return -ENOIOCTLCMD; 1899 1900 case SIOCSCCSMEM: 1901 if (!capable(CAP_SYS_RAWIO)) return -EPERM; 1902 if (!arg || copy_from_user(&memcfg, arg, sizeof(memcfg))) 1903 return -EINVAL; 1904 scc->stat.bufsize = memcfg.bufsize; 1905 return 0; 1906 1907 case SIOCSCCGSTAT: 1908 if (!arg || copy_to_user(arg, &scc->stat, sizeof(scc->stat))) 1909 return -EINVAL; 1910 return 0; 1911 1912 case SIOCSCCGKISS: 1913 if (!arg || copy_from_user(&kiss_cmd, arg, sizeof(kiss_cmd))) 1914 return -EINVAL; 1915 kiss_cmd.param = scc_get_param(scc, kiss_cmd.command); 1916 if (copy_to_user(arg, &kiss_cmd, sizeof(kiss_cmd))) 1917 return -EINVAL; 1918 return 0; 1919 1920 case SIOCSCCSKISS: 1921 if (!capable(CAP_NET_ADMIN)) return -EPERM; 1922 if (!arg || copy_from_user(&kiss_cmd, arg, sizeof(kiss_cmd))) 1923 return -EINVAL; 1924 return scc_set_param(scc, kiss_cmd.command, kiss_cmd.param); 1925 1926 case SIOCSCCCAL: 1927 if (!capable(CAP_SYS_RAWIO)) return -EPERM; 1928 if (!arg || copy_from_user(&cal, arg, sizeof(cal)) || cal.time == 0) 1929 return -EINVAL; 1930 1931 scc_start_calibrate(scc, cal.time, cal.pattern); 1932 return 0; 1933 1934 default: 1935 return -ENOIOCTLCMD; 1936 1937 } 1938 1939 return -EINVAL; 1940 } 1941 1942 /* ----> set interface callsign <---- */ 1943 1944 static int scc_net_set_mac_address(struct net_device *dev, void *addr) 1945 { 1946 struct sockaddr *sa = (struct sockaddr *) addr; 1947 memcpy(dev->dev_addr, sa->sa_data, dev->addr_len); 1948 return 0; 1949 } 1950 1951 /* ----> get statistics <---- */ 1952 1953 static struct net_device_stats *scc_net_get_stats(struct net_device *dev) 1954 { 1955 struct scc_channel *scc = (struct scc_channel *) dev->ml_priv; 1956 1957 scc->dev_stat.rx_errors = scc->stat.rxerrs + scc->stat.rx_over; 1958 scc->dev_stat.tx_errors = scc->stat.txerrs + scc->stat.tx_under; 1959 scc->dev_stat.rx_fifo_errors = scc->stat.rx_over; 1960 scc->dev_stat.tx_fifo_errors = scc->stat.tx_under; 1961 1962 return &scc->dev_stat; 1963 } 1964 1965 /* ******************************************************************** */ 1966 /* * dump statistics to /proc/net/z8530drv * */ 1967 /* ******************************************************************** */ 1968 1969 #ifdef CONFIG_PROC_FS 1970 1971 static inline struct scc_channel *scc_net_seq_idx(loff_t pos) 1972 { 1973 int k; 1974 1975 for (k = 0; k < Nchips*2; ++k) { 1976 if (!SCC_Info[k].init) 1977 continue; 1978 if (pos-- == 0) 1979 return &SCC_Info[k]; 1980 } 1981 return NULL; 1982 } 1983 1984 static void *scc_net_seq_start(struct seq_file *seq, loff_t *pos) 1985 { 1986 return *pos ? scc_net_seq_idx(*pos - 1) : SEQ_START_TOKEN; 1987 1988 } 1989 1990 static void *scc_net_seq_next(struct seq_file *seq, void *v, loff_t *pos) 1991 { 1992 unsigned k; 1993 struct scc_channel *scc = v; 1994 ++*pos; 1995 1996 for (k = (v == SEQ_START_TOKEN) ? 0 : (scc - SCC_Info)+1; 1997 k < Nchips*2; ++k) { 1998 if (SCC_Info[k].init) 1999 return &SCC_Info[k]; 2000 } 2001 return NULL; 2002 } 2003 2004 static void scc_net_seq_stop(struct seq_file *seq, void *v) 2005 { 2006 } 2007 2008 static int scc_net_seq_show(struct seq_file *seq, void *v) 2009 { 2010 if (v == SEQ_START_TOKEN) { 2011 seq_puts(seq, "z8530drv-"VERSION"\n"); 2012 } else if (!Driver_Initialized) { 2013 seq_puts(seq, "not initialized\n"); 2014 } else if (!Nchips) { 2015 seq_puts(seq, "chips missing\n"); 2016 } else { 2017 const struct scc_channel *scc = v; 2018 const struct scc_stat *stat = &scc->stat; 2019 const struct scc_kiss *kiss = &scc->kiss; 2020 2021 2022 /* dev data ctrl irq clock brand enh vector special option 2023 * baud nrz clocksrc softdcd bufsize 2024 * rxints txints exints spints 2025 * rcvd rxerrs over / xmit txerrs under / nospace bufsize 2026 * txd pers slot tail ful wait min maxk idl defr txof grp 2027 * W ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## 2028 * R ## ## XX ## ## ## ## ## XX ## ## ## ## ## ## ## 2029 */ 2030 2031 seq_printf(seq, "%s\t%3.3lx %3.3lx %d %lu %2.2x %d %3.3lx %3.3lx %d\n", 2032 scc->dev->name, 2033 scc->data, scc->ctrl, scc->irq, scc->clock, scc->brand, 2034 scc->enhanced, Vector_Latch, scc->special, 2035 scc->option); 2036 seq_printf(seq, "\t%lu %d %d %d %d\n", 2037 scc->modem.speed, scc->modem.nrz, 2038 scc->modem.clocksrc, kiss->softdcd, 2039 stat->bufsize); 2040 seq_printf(seq, "\t%lu %lu %lu %lu\n", 2041 stat->rxints, stat->txints, stat->exints, stat->spints); 2042 seq_printf(seq, "\t%lu %lu %d / %lu %lu %d / %d %d\n", 2043 stat->rxframes, stat->rxerrs, stat->rx_over, 2044 stat->txframes, stat->txerrs, stat->tx_under, 2045 stat->nospace, stat->tx_state); 2046 2047 #define K(x) kiss->x 2048 seq_printf(seq, "\t%d %d %d %d %d %d %d %d %d %d %d %d\n", 2049 K(txdelay), K(persist), K(slottime), K(tailtime), 2050 K(fulldup), K(waittime), K(mintime), K(maxkeyup), 2051 K(idletime), K(maxdefer), K(tx_inhibit), K(group)); 2052 #undef K 2053 #ifdef SCC_DEBUG 2054 { 2055 int reg; 2056 2057 seq_printf(seq, "\tW "); 2058 for (reg = 0; reg < 16; reg++) 2059 seq_printf(seq, "%2.2x ", scc->wreg[reg]); 2060 seq_printf(seq, "\n"); 2061 2062 seq_printf(seq, "\tR %2.2x %2.2x XX ", InReg(scc->ctrl,R0), InReg(scc->ctrl,R1)); 2063 for (reg = 3; reg < 8; reg++) 2064 seq_printf(seq, "%2.2x ", InReg(scc->ctrl, reg)); 2065 seq_printf(seq, "XX "); 2066 for (reg = 9; reg < 16; reg++) 2067 seq_printf(seq, "%2.2x ", InReg(scc->ctrl, reg)); 2068 seq_printf(seq, "\n"); 2069 } 2070 #endif 2071 seq_putc(seq, '\n'); 2072 } 2073 2074 return 0; 2075 } 2076 2077 static const struct seq_operations scc_net_seq_ops = { 2078 .start = scc_net_seq_start, 2079 .next = scc_net_seq_next, 2080 .stop = scc_net_seq_stop, 2081 .show = scc_net_seq_show, 2082 }; 2083 2084 2085 static int scc_net_seq_open(struct inode *inode, struct file *file) 2086 { 2087 return seq_open(file, &scc_net_seq_ops); 2088 } 2089 2090 static const struct file_operations scc_net_seq_fops = { 2091 .owner = THIS_MODULE, 2092 .open = scc_net_seq_open, 2093 .read = seq_read, 2094 .llseek = seq_lseek, 2095 .release = seq_release_private, 2096 }; 2097 2098 #endif /* CONFIG_PROC_FS */ 2099 2100 2101 /* ******************************************************************** */ 2102 /* * Init SCC driver * */ 2103 /* ******************************************************************** */ 2104 2105 static int __init scc_init_driver (void) 2106 { 2107 char devname[IFNAMSIZ]; 2108 2109 printk(banner); 2110 2111 sprintf(devname,"%s0", SCC_DriverName); 2112 2113 rtnl_lock(); 2114 if (scc_net_alloc(devname, SCC_Info)) { 2115 rtnl_unlock(); 2116 printk(KERN_ERR "z8530drv: cannot initialize module\n"); 2117 return -EIO; 2118 } 2119 rtnl_unlock(); 2120 2121 proc_net_fops_create(&init_net, "z8530drv", 0, &scc_net_seq_fops); 2122 2123 return 0; 2124 } 2125 2126 static void __exit scc_cleanup_driver(void) 2127 { 2128 io_port ctrl; 2129 int k; 2130 struct scc_channel *scc; 2131 struct net_device *dev; 2132 2133 if (Nchips == 0 && (dev = SCC_Info[0].dev)) 2134 { 2135 unregister_netdev(dev); 2136 free_netdev(dev); 2137 } 2138 2139 /* Guard against chip prattle */ 2140 local_irq_disable(); 2141 2142 for (k = 0; k < Nchips; k++) 2143 if ( (ctrl = SCC_ctrl[k].chan_A) ) 2144 { 2145 Outb(ctrl, 0); 2146 OutReg(ctrl,R9,FHWRES); /* force hardware reset */ 2147 udelay(50); 2148 } 2149 2150 /* To unload the port must be closed so no real IRQ pending */ 2151 for (k = 0; k < nr_irqs ; k++) 2152 if (Ivec[k].used) free_irq(k, NULL); 2153 2154 local_irq_enable(); 2155 2156 /* Now clean up */ 2157 for (k = 0; k < Nchips*2; k++) 2158 { 2159 scc = &SCC_Info[k]; 2160 if (scc->ctrl) 2161 { 2162 release_region(scc->ctrl, 1); 2163 release_region(scc->data, 1); 2164 } 2165 if (scc->dev) 2166 { 2167 unregister_netdev(scc->dev); 2168 free_netdev(scc->dev); 2169 } 2170 } 2171 2172 2173 if (Vector_Latch) 2174 release_region(Vector_Latch, 1); 2175 2176 proc_net_remove(&init_net, "z8530drv"); 2177 } 2178 2179 MODULE_AUTHOR("Joerg Reuter <jreuter@yaina.de>"); 2180 MODULE_DESCRIPTION("AX.25 Device Driver for Z8530 based HDLC cards"); 2181 MODULE_SUPPORTED_DEVICE("Z8530 based SCC cards for Amateur Radio"); 2182 MODULE_LICENSE("GPL"); 2183 module_init(scc_init_driver); 2184 module_exit(scc_cleanup_driver); 2185