1 #define RCS_ID "$Id: scc.c,v 1.75 1998/11/04 15:15:01 jreuter Exp jreuter $" 2 3 #define VERSION "3.0" 4 5 /* 6 * Please use z8530drv-utils-3.0 with this version. 7 * ------------------ 8 * 9 * You can find a subset of the documentation in 10 * Documentation/networking/z8530drv.txt. 11 */ 12 13 /* 14 ******************************************************************** 15 * SCC.C - Linux driver for Z8530 based HDLC cards for AX.25 * 16 ******************************************************************** 17 18 19 ******************************************************************** 20 21 Copyright (c) 1993, 2000 Joerg Reuter DL1BKE 22 23 portions (c) 1993 Guido ten Dolle PE1NNZ 24 25 ******************************************************************** 26 27 The driver and the programs in the archive are UNDER CONSTRUCTION. 28 The code is likely to fail, and so your kernel could --- even 29 a whole network. 30 31 This driver is intended for Amateur Radio use. If you are running it 32 for commercial purposes, please drop me a note. I am nosy... 33 34 ...BUT: 35 36 ! You m u s t recognize the appropriate legislations of your country ! 37 ! before you connect a radio to the SCC board and start to transmit or ! 38 ! receive. The GPL allows you to use the d r i v e r, NOT the RADIO! ! 39 40 For non-Amateur-Radio use please note that you might need a special 41 allowance/licence from the designer of the SCC Board and/or the 42 MODEM. 43 44 This program is free software; you can redistribute it and/or modify 45 it under the terms of the (modified) GNU General Public License 46 delivered with the Linux kernel source. 47 48 This program is distributed in the hope that it will be useful, 49 but WITHOUT ANY WARRANTY; without even the implied warranty of 50 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 51 GNU General Public License for more details. 52 53 You should find a copy of the GNU General Public License in 54 /usr/src/linux/COPYING; 55 56 ******************************************************************** 57 58 59 Incomplete history of z8530drv: 60 ------------------------------- 61 62 1994-09-13 started to write the driver, rescued most of my own 63 code (and Hans Alblas' memory buffer pool concept) from 64 an earlier project "sccdrv" which was initiated by 65 Guido ten Dolle. Not much of the old driver survived, 66 though. The first version I put my hands on was sccdrv1.3 67 from August 1993. The memory buffer pool concept 68 appeared in an unauthorized sccdrv version (1.5) from 69 August 1994. 70 71 1995-01-31 changed copyright notice to GPL without limitations. 72 73 . 74 . <SNIP> 75 . 76 77 1996-10-05 New semester, new driver... 78 79 * KISS TNC emulator removed (TTY driver) 80 * Source moved to drivers/net/ 81 * Includes Z8530 defines from drivers/net/z8530.h 82 * Uses sk_buffer memory management 83 * Reduced overhead of /proc/net/z8530drv output 84 * Streamlined quite a lot things 85 * Invents brand new bugs... ;-) 86 87 The move to version number 3.0 reflects theses changes. 88 You can use 'kissbridge' if you need a KISS TNC emulator. 89 90 1996-12-13 Fixed for Linux networking changes. (G4KLX) 91 1997-01-08 Fixed the remaining problems. 92 1997-04-02 Hopefully fixed the problems with the new *_timer() 93 routines, added calibration code. 94 1997-10-12 Made SCC_DELAY a CONFIG option, added CONFIG_SCC_TRXECHO 95 1998-01-29 Small fix to avoid lock-up on initialization 96 1998-09-29 Fixed the "grouping" bugs, tx_inhibit works again, 97 using dev->tx_queue_len now instead of MAXQUEUE now. 98 1998-10-21 Postponed the spinlock changes, would need a lot of 99 testing I currently don't have the time to. Softdcd doesn't 100 work. 101 1998-11-04 Softdcd does not work correctly in DPLL mode, in fact it 102 never did. The DPLL locks on noise, the SYNC unit sees 103 flags that aren't... Restarting the DPLL does not help 104 either, it resynchronizes too slow and the first received 105 frame gets lost. 106 2000-02-13 Fixed for new network driver interface changes, still 107 does TX timeouts itself since it uses its own queue 108 scheme. 109 110 Thanks to all who contributed to this driver with ideas and bug 111 reports! 112 113 NB -- if you find errors, change something, please let me know 114 first before you distribute it... And please don't touch 115 the version number. Just replace my callsign in 116 "v3.0.dl1bke" with your own. Just to avoid confusion... 117 118 If you want to add your modification to the linux distribution 119 please (!) contact me first. 120 121 New versions of the driver will be announced on the linux-hams 122 mailing list on vger.kernel.org. To subscribe send an e-mail 123 to majordomo@vger.kernel.org with the following line in 124 the body of the mail: 125 126 subscribe linux-hams 127 128 The content of the "Subject" field will be ignored. 129 130 vy 73, 131 Joerg Reuter ampr-net: dl1bke@db0pra.ampr.org 132 AX-25 : DL1BKE @ DB0ABH.#BAY.DEU.EU 133 Internet: jreuter@yaina.de 134 www : http://yaina.de/jreuter 135 */ 136 137 /* ----------------------------------------------------------------------- */ 138 139 #undef SCC_LDELAY /* slow it even a bit more down */ 140 #undef SCC_DONT_CHECK /* don't look if the SCCs you specified are available */ 141 142 #define SCC_MAXCHIPS 4 /* number of max. supported chips */ 143 #define SCC_BUFSIZE 384 /* must not exceed 4096 */ 144 #undef SCC_DEBUG 145 146 #define SCC_DEFAULT_CLOCK 4915200 147 /* default pclock if nothing is specified */ 148 149 /* ----------------------------------------------------------------------- */ 150 151 #include <linux/module.h> 152 #include <linux/errno.h> 153 #include <linux/signal.h> 154 #include <linux/timer.h> 155 #include <linux/interrupt.h> 156 #include <linux/ioport.h> 157 #include <linux/string.h> 158 #include <linux/in.h> 159 #include <linux/fcntl.h> 160 #include <linux/ptrace.h> 161 #include <linux/slab.h> 162 #include <linux/delay.h> 163 #include <linux/skbuff.h> 164 #include <linux/netdevice.h> 165 #include <linux/rtnetlink.h> 166 #include <linux/if_ether.h> 167 #include <linux/if_arp.h> 168 #include <linux/socket.h> 169 #include <linux/init.h> 170 #include <linux/scc.h> 171 #include <linux/ctype.h> 172 #include <linux/kernel.h> 173 #include <linux/proc_fs.h> 174 #include <linux/seq_file.h> 175 #include <linux/bitops.h> 176 177 #include <net/ax25.h> 178 179 #include <asm/irq.h> 180 #include <asm/system.h> 181 #include <asm/io.h> 182 #include <asm/uaccess.h> 183 184 #include "z8530.h" 185 186 static char banner[] __initdata = KERN_INFO "AX.25: Z8530 SCC driver version "VERSION".dl1bke\n"; 187 188 static void t_dwait(unsigned long); 189 static void t_txdelay(unsigned long); 190 static void t_tail(unsigned long); 191 static void t_busy(unsigned long); 192 static void t_maxkeyup(unsigned long); 193 static void t_idle(unsigned long); 194 static void scc_tx_done(struct scc_channel *); 195 static void scc_start_tx_timer(struct scc_channel *, void (*)(unsigned long), unsigned long); 196 static void scc_start_maxkeyup(struct scc_channel *); 197 static void scc_start_defer(struct scc_channel *); 198 199 static void z8530_init(void); 200 201 static void init_channel(struct scc_channel *scc); 202 static void scc_key_trx (struct scc_channel *scc, char tx); 203 static irqreturn_t scc_isr(int irq, void *dev_id, struct pt_regs *regs); 204 static void scc_init_timer(struct scc_channel *scc); 205 206 static int scc_net_alloc(const char *name, struct scc_channel *scc); 207 static void scc_net_setup(struct net_device *dev); 208 static int scc_net_open(struct net_device *dev); 209 static int scc_net_close(struct net_device *dev); 210 static void scc_net_rx(struct scc_channel *scc, struct sk_buff *skb); 211 static int scc_net_tx(struct sk_buff *skb, struct net_device *dev); 212 static int scc_net_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd); 213 static int scc_net_set_mac_address(struct net_device *dev, void *addr); 214 static struct net_device_stats * scc_net_get_stats(struct net_device *dev); 215 216 static unsigned char SCC_DriverName[] = "scc"; 217 218 static struct irqflags { unsigned char used : 1; } Ivec[NR_IRQS]; 219 220 static struct scc_channel SCC_Info[2 * SCC_MAXCHIPS]; /* information per channel */ 221 222 static struct scc_ctrl { 223 io_port chan_A; 224 io_port chan_B; 225 int irq; 226 } SCC_ctrl[SCC_MAXCHIPS+1]; 227 228 static unsigned char Driver_Initialized; 229 static int Nchips; 230 static io_port Vector_Latch; 231 232 233 /* ******************************************************************** */ 234 /* * Port Access Functions * */ 235 /* ******************************************************************** */ 236 237 /* These provide interrupt save 2-step access to the Z8530 registers */ 238 239 static DEFINE_SPINLOCK(iolock); /* Guards paired accesses */ 240 241 static inline unsigned char InReg(io_port port, unsigned char reg) 242 { 243 unsigned long flags; 244 unsigned char r; 245 246 spin_lock_irqsave(&iolock, flags); 247 #ifdef SCC_LDELAY 248 Outb(port, reg); 249 udelay(SCC_LDELAY); 250 r=Inb(port); 251 udelay(SCC_LDELAY); 252 #else 253 Outb(port, reg); 254 r=Inb(port); 255 #endif 256 spin_unlock_irqrestore(&iolock, flags); 257 return r; 258 } 259 260 static inline void OutReg(io_port port, unsigned char reg, unsigned char val) 261 { 262 unsigned long flags; 263 264 spin_lock_irqsave(&iolock, flags); 265 #ifdef SCC_LDELAY 266 Outb(port, reg); udelay(SCC_LDELAY); 267 Outb(port, val); udelay(SCC_LDELAY); 268 #else 269 Outb(port, reg); 270 Outb(port, val); 271 #endif 272 spin_unlock_irqrestore(&iolock, flags); 273 } 274 275 static inline void wr(struct scc_channel *scc, unsigned char reg, 276 unsigned char val) 277 { 278 OutReg(scc->ctrl, reg, (scc->wreg[reg] = val)); 279 } 280 281 static inline void or(struct scc_channel *scc, unsigned char reg, unsigned char val) 282 { 283 OutReg(scc->ctrl, reg, (scc->wreg[reg] |= val)); 284 } 285 286 static inline void cl(struct scc_channel *scc, unsigned char reg, unsigned char val) 287 { 288 OutReg(scc->ctrl, reg, (scc->wreg[reg] &= ~val)); 289 } 290 291 /* ******************************************************************** */ 292 /* * Some useful macros * */ 293 /* ******************************************************************** */ 294 295 static inline void scc_discard_buffers(struct scc_channel *scc) 296 { 297 unsigned long flags; 298 299 spin_lock_irqsave(&scc->lock, flags); 300 if (scc->tx_buff != NULL) 301 { 302 dev_kfree_skb(scc->tx_buff); 303 scc->tx_buff = NULL; 304 } 305 306 while (!skb_queue_empty(&scc->tx_queue)) 307 dev_kfree_skb(skb_dequeue(&scc->tx_queue)); 308 309 spin_unlock_irqrestore(&scc->lock, flags); 310 } 311 312 313 314 /* ******************************************************************** */ 315 /* * Interrupt Service Routines * */ 316 /* ******************************************************************** */ 317 318 319 /* ----> subroutines for the interrupt handlers <---- */ 320 321 static inline void scc_notify(struct scc_channel *scc, int event) 322 { 323 struct sk_buff *skb; 324 char *bp; 325 326 if (scc->kiss.fulldup != KISS_DUPLEX_OPTIMA) 327 return; 328 329 skb = dev_alloc_skb(2); 330 if (skb != NULL) 331 { 332 bp = skb_put(skb, 2); 333 *bp++ = PARAM_HWEVENT; 334 *bp++ = event; 335 scc_net_rx(scc, skb); 336 } else 337 scc->stat.nospace++; 338 } 339 340 static inline void flush_rx_FIFO(struct scc_channel *scc) 341 { 342 int k; 343 344 for (k=0; k<3; k++) 345 Inb(scc->data); 346 347 if(scc->rx_buff != NULL) /* did we receive something? */ 348 { 349 scc->stat.rxerrs++; /* then count it as an error */ 350 dev_kfree_skb_irq(scc->rx_buff); 351 scc->rx_buff = NULL; 352 } 353 } 354 355 static void start_hunt(struct scc_channel *scc) 356 { 357 if ((scc->modem.clocksrc != CLK_EXTERNAL)) 358 OutReg(scc->ctrl,R14,SEARCH|scc->wreg[R14]); /* DPLL: enter search mode */ 359 or(scc,R3,ENT_HM|RxENABLE); /* enable the receiver, hunt mode */ 360 } 361 362 /* ----> four different interrupt handlers for Tx, Rx, changing of */ 363 /* DCD/CTS and Rx/Tx errors */ 364 365 /* Transmitter interrupt handler */ 366 static inline void scc_txint(struct scc_channel *scc) 367 { 368 struct sk_buff *skb; 369 370 scc->stat.txints++; 371 skb = scc->tx_buff; 372 373 /* send first octet */ 374 375 if (skb == NULL) 376 { 377 skb = skb_dequeue(&scc->tx_queue); 378 scc->tx_buff = skb; 379 netif_wake_queue(scc->dev); 380 381 if (skb == NULL) 382 { 383 scc_tx_done(scc); 384 Outb(scc->ctrl, RES_Tx_P); 385 return; 386 } 387 388 if (skb->len == 0) /* Paranoia... */ 389 { 390 dev_kfree_skb_irq(skb); 391 scc->tx_buff = NULL; 392 scc_tx_done(scc); 393 Outb(scc->ctrl, RES_Tx_P); 394 return; 395 } 396 397 scc->stat.tx_state = TXS_ACTIVE; 398 399 OutReg(scc->ctrl, R0, RES_Tx_CRC); 400 /* reset CRC generator */ 401 or(scc,R10,ABUNDER); /* re-install underrun protection */ 402 Outb(scc->data,*skb->data); /* send byte */ 403 skb_pull(skb, 1); 404 405 if (!scc->enhanced) /* reset EOM latch */ 406 Outb(scc->ctrl,RES_EOM_L); 407 return; 408 } 409 410 /* End Of Frame... */ 411 412 if (skb->len == 0) 413 { 414 Outb(scc->ctrl, RES_Tx_P); /* reset pending int */ 415 cl(scc, R10, ABUNDER); /* send CRC */ 416 dev_kfree_skb_irq(skb); 417 scc->tx_buff = NULL; 418 scc->stat.tx_state = TXS_NEWFRAME; /* next frame... */ 419 return; 420 } 421 422 /* send octet */ 423 424 Outb(scc->data,*skb->data); 425 skb_pull(skb, 1); 426 } 427 428 429 /* External/Status interrupt handler */ 430 static inline void scc_exint(struct scc_channel *scc) 431 { 432 unsigned char status,changes,chg_and_stat; 433 434 scc->stat.exints++; 435 436 status = InReg(scc->ctrl,R0); 437 changes = status ^ scc->status; 438 chg_and_stat = changes & status; 439 440 /* ABORT: generated whenever DCD drops while receiving */ 441 442 if (chg_and_stat & BRK_ABRT) /* Received an ABORT */ 443 flush_rx_FIFO(scc); 444 445 /* HUNT: software DCD; on = waiting for SYNC, off = receiving frame */ 446 447 if ((changes & SYNC_HUNT) && scc->kiss.softdcd) 448 { 449 if (status & SYNC_HUNT) 450 { 451 scc->dcd = 0; 452 flush_rx_FIFO(scc); 453 if ((scc->modem.clocksrc != CLK_EXTERNAL)) 454 OutReg(scc->ctrl,R14,SEARCH|scc->wreg[R14]); /* DPLL: enter search mode */ 455 } else { 456 scc->dcd = 1; 457 } 458 459 scc_notify(scc, scc->dcd? HWEV_DCD_OFF:HWEV_DCD_ON); 460 } 461 462 /* DCD: on = start to receive packet, off = ABORT condition */ 463 /* (a successfully received packet generates a special condition int) */ 464 465 if((changes & DCD) && !scc->kiss.softdcd) /* DCD input changed state */ 466 { 467 if(status & DCD) /* DCD is now ON */ 468 { 469 start_hunt(scc); 470 scc->dcd = 1; 471 } else { /* DCD is now OFF */ 472 cl(scc,R3,ENT_HM|RxENABLE); /* disable the receiver */ 473 flush_rx_FIFO(scc); 474 scc->dcd = 0; 475 } 476 477 scc_notify(scc, scc->dcd? HWEV_DCD_ON:HWEV_DCD_OFF); 478 } 479 480 #ifdef notdef 481 /* CTS: use external TxDelay (what's that good for?!) 482 * Anyway: If we _could_ use it (BayCom USCC uses CTS for 483 * own purposes) we _should_ use the "autoenable" feature 484 * of the Z8530 and not this interrupt... 485 */ 486 487 if (chg_and_stat & CTS) /* CTS is now ON */ 488 { 489 if (scc->kiss.txdelay == 0) /* zero TXDELAY = wait for CTS */ 490 scc_start_tx_timer(scc, t_txdelay, 0); 491 } 492 #endif 493 494 if (scc->stat.tx_state == TXS_ACTIVE && (status & TxEOM)) 495 { 496 scc->stat.tx_under++; /* oops, an underrun! count 'em */ 497 Outb(scc->ctrl, RES_EXT_INT); /* reset ext/status interrupts */ 498 499 if (scc->tx_buff != NULL) 500 { 501 dev_kfree_skb_irq(scc->tx_buff); 502 scc->tx_buff = NULL; 503 } 504 505 or(scc,R10,ABUNDER); 506 scc_start_tx_timer(scc, t_txdelay, 0); /* restart transmission */ 507 } 508 509 scc->status = status; 510 Outb(scc->ctrl,RES_EXT_INT); 511 } 512 513 514 /* Receiver interrupt handler */ 515 static inline void scc_rxint(struct scc_channel *scc) 516 { 517 struct sk_buff *skb; 518 519 scc->stat.rxints++; 520 521 if((scc->wreg[5] & RTS) && scc->kiss.fulldup == KISS_DUPLEX_HALF) 522 { 523 Inb(scc->data); /* discard char */ 524 or(scc,R3,ENT_HM); /* enter hunt mode for next flag */ 525 return; 526 } 527 528 skb = scc->rx_buff; 529 530 if (skb == NULL) 531 { 532 skb = dev_alloc_skb(scc->stat.bufsize); 533 if (skb == NULL) 534 { 535 scc->dev_stat.rx_dropped++; 536 scc->stat.nospace++; 537 Inb(scc->data); 538 or(scc, R3, ENT_HM); 539 return; 540 } 541 542 scc->rx_buff = skb; 543 *(skb_put(skb, 1)) = 0; /* KISS data */ 544 } 545 546 if (skb->len >= scc->stat.bufsize) 547 { 548 #ifdef notdef 549 printk(KERN_DEBUG "z8530drv: oops, scc_rxint() received huge frame...\n"); 550 #endif 551 dev_kfree_skb_irq(skb); 552 scc->rx_buff = NULL; 553 Inb(scc->data); 554 or(scc, R3, ENT_HM); 555 return; 556 } 557 558 *(skb_put(skb, 1)) = Inb(scc->data); 559 } 560 561 562 /* Receive Special Condition interrupt handler */ 563 static inline void scc_spint(struct scc_channel *scc) 564 { 565 unsigned char status; 566 struct sk_buff *skb; 567 568 scc->stat.spints++; 569 570 status = InReg(scc->ctrl,R1); /* read receiver status */ 571 572 Inb(scc->data); /* throw away Rx byte */ 573 skb = scc->rx_buff; 574 575 if(status & Rx_OVR) /* receiver overrun */ 576 { 577 scc->stat.rx_over++; /* count them */ 578 or(scc,R3,ENT_HM); /* enter hunt mode for next flag */ 579 580 if (skb != NULL) 581 dev_kfree_skb_irq(skb); 582 scc->rx_buff = skb = NULL; 583 } 584 585 if(status & END_FR && skb != NULL) /* end of frame */ 586 { 587 /* CRC okay, frame ends on 8 bit boundary and received something ? */ 588 589 if (!(status & CRC_ERR) && (status & 0xe) == RES8 && skb->len > 0) 590 { 591 /* ignore last received byte (first of the CRC bytes) */ 592 skb_trim(skb, skb->len-1); 593 scc_net_rx(scc, skb); 594 scc->rx_buff = NULL; 595 scc->stat.rxframes++; 596 } else { /* a bad frame */ 597 dev_kfree_skb_irq(skb); 598 scc->rx_buff = NULL; 599 scc->stat.rxerrs++; 600 } 601 } 602 603 Outb(scc->ctrl,ERR_RES); 604 } 605 606 607 /* ----> interrupt service routine for the Z8530 <---- */ 608 609 static void scc_isr_dispatch(struct scc_channel *scc, int vector) 610 { 611 spin_lock(&scc->lock); 612 switch (vector & VECTOR_MASK) 613 { 614 case TXINT: scc_txint(scc); break; 615 case EXINT: scc_exint(scc); break; 616 case RXINT: scc_rxint(scc); break; 617 case SPINT: scc_spint(scc); break; 618 } 619 spin_unlock(&scc->lock); 620 } 621 622 /* If the card has a latch for the interrupt vector (like the PA0HZP card) 623 use it to get the number of the chip that generated the int. 624 If not: poll all defined chips. 625 */ 626 627 #define SCC_IRQTIMEOUT 30000 628 629 static irqreturn_t scc_isr(int irq, void *dev_id, struct pt_regs *regs) 630 { 631 unsigned char vector; 632 struct scc_channel *scc; 633 struct scc_ctrl *ctrl; 634 int k; 635 636 if (Vector_Latch) 637 { 638 for(k=0; k < SCC_IRQTIMEOUT; k++) 639 { 640 Outb(Vector_Latch, 0); /* Generate INTACK */ 641 642 /* Read the vector */ 643 if((vector=Inb(Vector_Latch)) >= 16 * Nchips) break; 644 if (vector & 0x01) break; 645 646 scc=&SCC_Info[vector >> 3 ^ 0x01]; 647 if (!scc->dev) break; 648 649 scc_isr_dispatch(scc, vector); 650 651 OutReg(scc->ctrl,R0,RES_H_IUS); /* Reset Highest IUS */ 652 } 653 654 if (k == SCC_IRQTIMEOUT) 655 printk(KERN_WARNING "z8530drv: endless loop in scc_isr()?\n"); 656 657 return IRQ_HANDLED; 658 } 659 660 /* Find the SCC generating the interrupt by polling all attached SCCs 661 * reading RR3A (the interrupt pending register) 662 */ 663 664 ctrl = SCC_ctrl; 665 while (ctrl->chan_A) 666 { 667 if (ctrl->irq != irq) 668 { 669 ctrl++; 670 continue; 671 } 672 673 scc = NULL; 674 for (k = 0; InReg(ctrl->chan_A,R3) && k < SCC_IRQTIMEOUT; k++) 675 { 676 vector=InReg(ctrl->chan_B,R2); /* Read the vector */ 677 if (vector & 0x01) break; 678 679 scc = &SCC_Info[vector >> 3 ^ 0x01]; 680 if (!scc->dev) break; 681 682 scc_isr_dispatch(scc, vector); 683 } 684 685 if (k == SCC_IRQTIMEOUT) 686 { 687 printk(KERN_WARNING "z8530drv: endless loop in scc_isr()?!\n"); 688 break; 689 } 690 691 /* This looks weird and it is. At least the BayCom USCC doesn't 692 * use the Interrupt Daisy Chain, thus we'll have to start 693 * all over again to be sure not to miss an interrupt from 694 * (any of) the other chip(s)... 695 * Honestly, the situation *is* braindamaged... 696 */ 697 698 if (scc != NULL) 699 { 700 OutReg(scc->ctrl,R0,RES_H_IUS); 701 ctrl = SCC_ctrl; 702 } else 703 ctrl++; 704 } 705 return IRQ_HANDLED; 706 } 707 708 709 710 /* ******************************************************************** */ 711 /* * Init Channel */ 712 /* ******************************************************************** */ 713 714 715 /* ----> set SCC channel speed <---- */ 716 717 static inline void set_brg(struct scc_channel *scc, unsigned int tc) 718 { 719 cl(scc,R14,BRENABL); /* disable baudrate generator */ 720 wr(scc,R12,tc & 255); /* brg rate LOW */ 721 wr(scc,R13,tc >> 8); /* brg rate HIGH */ 722 or(scc,R14,BRENABL); /* enable baudrate generator */ 723 } 724 725 static inline void set_speed(struct scc_channel *scc) 726 { 727 unsigned long flags; 728 spin_lock_irqsave(&scc->lock, flags); 729 730 if (scc->modem.speed > 0) /* paranoia... */ 731 set_brg(scc, (unsigned) (scc->clock / (scc->modem.speed * 64)) - 2); 732 733 spin_unlock_irqrestore(&scc->lock, flags); 734 } 735 736 737 /* ----> initialize a SCC channel <---- */ 738 739 static inline void init_brg(struct scc_channel *scc) 740 { 741 wr(scc, R14, BRSRC); /* BRG source = PCLK */ 742 OutReg(scc->ctrl, R14, SSBR|scc->wreg[R14]); /* DPLL source = BRG */ 743 OutReg(scc->ctrl, R14, SNRZI|scc->wreg[R14]); /* DPLL NRZI mode */ 744 } 745 746 /* 747 * Initialization according to the Z8530 manual (SGS-Thomson's version): 748 * 749 * 1. Modes and constants 750 * 751 * WR9 11000000 chip reset 752 * WR4 XXXXXXXX Tx/Rx control, async or sync mode 753 * WR1 0XX00X00 select W/REQ (optional) 754 * WR2 XXXXXXXX program interrupt vector 755 * WR3 XXXXXXX0 select Rx control 756 * WR5 XXXX0XXX select Tx control 757 * WR6 XXXXXXXX sync character 758 * WR7 XXXXXXXX sync character 759 * WR9 000X0XXX select interrupt control 760 * WR10 XXXXXXXX miscellaneous control (optional) 761 * WR11 XXXXXXXX clock control 762 * WR12 XXXXXXXX time constant lower byte (optional) 763 * WR13 XXXXXXXX time constant upper byte (optional) 764 * WR14 XXXXXXX0 miscellaneous control 765 * WR14 XXXSSSSS commands (optional) 766 * 767 * 2. Enables 768 * 769 * WR14 000SSSS1 baud rate enable 770 * WR3 SSSSSSS1 Rx enable 771 * WR5 SSSS1SSS Tx enable 772 * WR0 10000000 reset Tx CRG (optional) 773 * WR1 XSS00S00 DMA enable (optional) 774 * 775 * 3. Interrupt status 776 * 777 * WR15 XXXXXXXX enable external/status 778 * WR0 00010000 reset external status 779 * WR0 00010000 reset external status twice 780 * WR1 SSSXXSXX enable Rx, Tx and Ext/status 781 * WR9 000SXSSS enable master interrupt enable 782 * 783 * 1 = set to one, 0 = reset to zero 784 * X = user defined, S = same as previous init 785 * 786 * 787 * Note that the implementation differs in some points from above scheme. 788 * 789 */ 790 791 static void init_channel(struct scc_channel *scc) 792 { 793 del_timer(&scc->tx_t); 794 del_timer(&scc->tx_wdog); 795 796 disable_irq(scc->irq); 797 798 wr(scc,R4,X1CLK|SDLC); /* *1 clock, SDLC mode */ 799 wr(scc,R1,0); /* no W/REQ operation */ 800 wr(scc,R3,Rx8|RxCRC_ENAB); /* RX 8 bits/char, CRC, disabled */ 801 wr(scc,R5,Tx8|DTR|TxCRC_ENAB); /* TX 8 bits/char, disabled, DTR */ 802 wr(scc,R6,0); /* SDLC address zero (not used) */ 803 wr(scc,R7,FLAG); /* SDLC flag value */ 804 wr(scc,R9,VIS); /* vector includes status */ 805 wr(scc,R10,(scc->modem.nrz? NRZ : NRZI)|CRCPS|ABUNDER); /* abort on underrun, preset CRC generator, NRZ(I) */ 806 wr(scc,R14, 0); 807 808 809 /* set clock sources: 810 811 CLK_DPLL: normal halfduplex operation 812 813 RxClk: use DPLL 814 TxClk: use DPLL 815 TRxC mode DPLL output 816 817 CLK_EXTERNAL: external clocking (G3RUH or DF9IC modem) 818 819 BayCom: others: 820 821 TxClk = pin RTxC TxClk = pin TRxC 822 RxClk = pin TRxC RxClk = pin RTxC 823 824 825 CLK_DIVIDER: 826 RxClk = use DPLL 827 TxClk = pin RTxC 828 829 BayCom: others: 830 pin TRxC = DPLL pin TRxC = BRG 831 (RxClk * 1) (RxClk * 32) 832 */ 833 834 835 switch(scc->modem.clocksrc) 836 { 837 case CLK_DPLL: 838 wr(scc, R11, RCDPLL|TCDPLL|TRxCOI|TRxCDP); 839 init_brg(scc); 840 break; 841 842 case CLK_DIVIDER: 843 wr(scc, R11, ((scc->brand & BAYCOM)? TRxCDP : TRxCBR) | RCDPLL|TCRTxCP|TRxCOI); 844 init_brg(scc); 845 break; 846 847 case CLK_EXTERNAL: 848 wr(scc, R11, (scc->brand & BAYCOM)? RCTRxCP|TCRTxCP : RCRTxCP|TCTRxCP); 849 OutReg(scc->ctrl, R14, DISDPLL); 850 break; 851 852 } 853 854 set_speed(scc); /* set baudrate */ 855 856 if(scc->enhanced) 857 { 858 or(scc,R15,SHDLCE|FIFOE); /* enable FIFO, SDLC/HDLC Enhancements (From now R7 is R7') */ 859 wr(scc,R7,AUTOEOM); 860 } 861 862 if(scc->kiss.softdcd || (InReg(scc->ctrl,R0) & DCD)) 863 /* DCD is now ON */ 864 { 865 start_hunt(scc); 866 } 867 868 /* enable ABORT, DCD & SYNC/HUNT interrupts */ 869 870 wr(scc,R15, BRKIE|TxUIE|(scc->kiss.softdcd? SYNCIE:DCDIE)); 871 872 Outb(scc->ctrl,RES_EXT_INT); /* reset ext/status interrupts */ 873 Outb(scc->ctrl,RES_EXT_INT); /* must be done twice */ 874 875 or(scc,R1,INT_ALL_Rx|TxINT_ENAB|EXT_INT_ENAB); /* enable interrupts */ 876 877 scc->status = InReg(scc->ctrl,R0); /* read initial status */ 878 879 or(scc,R9,MIE); /* master interrupt enable */ 880 881 scc_init_timer(scc); 882 883 enable_irq(scc->irq); 884 } 885 886 887 888 889 /* ******************************************************************** */ 890 /* * SCC timer functions * */ 891 /* ******************************************************************** */ 892 893 894 /* ----> scc_key_trx sets the time constant for the baudrate 895 generator and keys the transmitter <---- */ 896 897 static void scc_key_trx(struct scc_channel *scc, char tx) 898 { 899 unsigned int time_const; 900 901 if (scc->brand & PRIMUS) 902 Outb(scc->ctrl + 4, scc->option | (tx? 0x80 : 0)); 903 904 if (scc->modem.speed < 300) 905 scc->modem.speed = 1200; 906 907 time_const = (unsigned) (scc->clock / (scc->modem.speed * (tx? 2:64))) - 2; 908 909 disable_irq(scc->irq); 910 911 if (tx) 912 { 913 or(scc, R1, TxINT_ENAB); /* t_maxkeyup may have reset these */ 914 or(scc, R15, TxUIE); 915 } 916 917 if (scc->modem.clocksrc == CLK_DPLL) 918 { /* force simplex operation */ 919 if (tx) 920 { 921 #ifdef CONFIG_SCC_TRXECHO 922 cl(scc, R3, RxENABLE|ENT_HM); /* switch off receiver */ 923 cl(scc, R15, DCDIE|SYNCIE); /* No DCD changes, please */ 924 #endif 925 set_brg(scc, time_const); /* reprogram baudrate generator */ 926 927 /* DPLL -> Rx clk, BRG -> Tx CLK, TRxC mode output, TRxC = BRG */ 928 wr(scc, R11, RCDPLL|TCBR|TRxCOI|TRxCBR); 929 930 /* By popular demand: tx_inhibit */ 931 if (scc->kiss.tx_inhibit) 932 { 933 or(scc,R5, TxENAB); 934 scc->wreg[R5] |= RTS; 935 } else { 936 or(scc,R5,RTS|TxENAB); /* set the RTS line and enable TX */ 937 } 938 } else { 939 cl(scc,R5,RTS|TxENAB); 940 941 set_brg(scc, time_const); /* reprogram baudrate generator */ 942 943 /* DPLL -> Rx clk, DPLL -> Tx CLK, TRxC mode output, TRxC = DPLL */ 944 wr(scc, R11, RCDPLL|TCDPLL|TRxCOI|TRxCDP); 945 946 #ifndef CONFIG_SCC_TRXECHO 947 if (scc->kiss.softdcd) 948 #endif 949 { 950 or(scc,R15, scc->kiss.softdcd? SYNCIE:DCDIE); 951 start_hunt(scc); 952 } 953 } 954 } else { 955 if (tx) 956 { 957 #ifdef CONFIG_SCC_TRXECHO 958 if (scc->kiss.fulldup == KISS_DUPLEX_HALF) 959 { 960 cl(scc, R3, RxENABLE); 961 cl(scc, R15, DCDIE|SYNCIE); 962 } 963 #endif 964 965 if (scc->kiss.tx_inhibit) 966 { 967 or(scc,R5, TxENAB); 968 scc->wreg[R5] |= RTS; 969 } else { 970 or(scc,R5,RTS|TxENAB); /* enable tx */ 971 } 972 } else { 973 cl(scc,R5,RTS|TxENAB); /* disable tx */ 974 975 if ((scc->kiss.fulldup == KISS_DUPLEX_HALF) && 976 #ifndef CONFIG_SCC_TRXECHO 977 scc->kiss.softdcd) 978 #else 979 1) 980 #endif 981 { 982 or(scc, R15, scc->kiss.softdcd? SYNCIE:DCDIE); 983 start_hunt(scc); 984 } 985 } 986 } 987 988 enable_irq(scc->irq); 989 } 990 991 992 /* ----> SCC timer interrupt handler and friends. <---- */ 993 994 static void __scc_start_tx_timer(struct scc_channel *scc, void (*handler)(unsigned long), unsigned long when) 995 { 996 del_timer(&scc->tx_t); 997 998 if (when == 0) 999 { 1000 handler((unsigned long) scc); 1001 } else 1002 if (when != TIMER_OFF) 1003 { 1004 scc->tx_t.data = (unsigned long) scc; 1005 scc->tx_t.function = handler; 1006 scc->tx_t.expires = jiffies + (when*HZ)/100; 1007 add_timer(&scc->tx_t); 1008 } 1009 } 1010 1011 static void scc_start_tx_timer(struct scc_channel *scc, void (*handler)(unsigned long), unsigned long when) 1012 { 1013 unsigned long flags; 1014 1015 spin_lock_irqsave(&scc->lock, flags); 1016 __scc_start_tx_timer(scc, handler, when); 1017 spin_unlock_irqrestore(&scc->lock, flags); 1018 } 1019 1020 static void scc_start_defer(struct scc_channel *scc) 1021 { 1022 unsigned long flags; 1023 1024 spin_lock_irqsave(&scc->lock, flags); 1025 del_timer(&scc->tx_wdog); 1026 1027 if (scc->kiss.maxdefer != 0 && scc->kiss.maxdefer != TIMER_OFF) 1028 { 1029 scc->tx_wdog.data = (unsigned long) scc; 1030 scc->tx_wdog.function = t_busy; 1031 scc->tx_wdog.expires = jiffies + HZ*scc->kiss.maxdefer; 1032 add_timer(&scc->tx_wdog); 1033 } 1034 spin_unlock_irqrestore(&scc->lock, flags); 1035 } 1036 1037 static void scc_start_maxkeyup(struct scc_channel *scc) 1038 { 1039 unsigned long flags; 1040 1041 spin_lock_irqsave(&scc->lock, flags); 1042 del_timer(&scc->tx_wdog); 1043 1044 if (scc->kiss.maxkeyup != 0 && scc->kiss.maxkeyup != TIMER_OFF) 1045 { 1046 scc->tx_wdog.data = (unsigned long) scc; 1047 scc->tx_wdog.function = t_maxkeyup; 1048 scc->tx_wdog.expires = jiffies + HZ*scc->kiss.maxkeyup; 1049 add_timer(&scc->tx_wdog); 1050 } 1051 spin_unlock_irqrestore(&scc->lock, flags); 1052 } 1053 1054 /* 1055 * This is called from scc_txint() when there are no more frames to send. 1056 * Not exactly a timer function, but it is a close friend of the family... 1057 */ 1058 1059 static void scc_tx_done(struct scc_channel *scc) 1060 { 1061 /* 1062 * trx remains keyed in fulldup mode 2 until t_idle expires. 1063 */ 1064 1065 switch (scc->kiss.fulldup) 1066 { 1067 case KISS_DUPLEX_LINK: 1068 scc->stat.tx_state = TXS_IDLE2; 1069 if (scc->kiss.idletime != TIMER_OFF) 1070 scc_start_tx_timer(scc, t_idle, scc->kiss.idletime*100); 1071 break; 1072 case KISS_DUPLEX_OPTIMA: 1073 scc_notify(scc, HWEV_ALL_SENT); 1074 break; 1075 default: 1076 scc->stat.tx_state = TXS_BUSY; 1077 scc_start_tx_timer(scc, t_tail, scc->kiss.tailtime); 1078 } 1079 1080 netif_wake_queue(scc->dev); 1081 } 1082 1083 1084 static unsigned char Rand = 17; 1085 1086 static inline int is_grouped(struct scc_channel *scc) 1087 { 1088 int k; 1089 struct scc_channel *scc2; 1090 unsigned char grp1, grp2; 1091 1092 grp1 = scc->kiss.group; 1093 1094 for (k = 0; k < (Nchips * 2); k++) 1095 { 1096 scc2 = &SCC_Info[k]; 1097 grp2 = scc2->kiss.group; 1098 1099 if (scc2 == scc || !(scc2->dev && grp2)) 1100 continue; 1101 1102 if ((grp1 & 0x3f) == (grp2 & 0x3f)) 1103 { 1104 if ( (grp1 & TXGROUP) && (scc2->wreg[R5] & RTS) ) 1105 return 1; 1106 1107 if ( (grp1 & RXGROUP) && scc2->dcd ) 1108 return 1; 1109 } 1110 } 1111 return 0; 1112 } 1113 1114 /* DWAIT and SLOTTIME expired 1115 * 1116 * fulldup == 0: DCD is active or Rand > P-persistence: start t_busy timer 1117 * else key trx and start txdelay 1118 * fulldup == 1: key trx and start txdelay 1119 * fulldup == 2: mintime expired, reset status or key trx and start txdelay 1120 */ 1121 1122 static void t_dwait(unsigned long channel) 1123 { 1124 struct scc_channel *scc = (struct scc_channel *) channel; 1125 1126 if (scc->stat.tx_state == TXS_WAIT) /* maxkeyup or idle timeout */ 1127 { 1128 if (skb_queue_empty(&scc->tx_queue)) { /* nothing to send */ 1129 scc->stat.tx_state = TXS_IDLE; 1130 netif_wake_queue(scc->dev); /* t_maxkeyup locked it. */ 1131 return; 1132 } 1133 1134 scc->stat.tx_state = TXS_BUSY; 1135 } 1136 1137 if (scc->kiss.fulldup == KISS_DUPLEX_HALF) 1138 { 1139 Rand = Rand * 17 + 31; 1140 1141 if (scc->dcd || (scc->kiss.persist) < Rand || (scc->kiss.group && is_grouped(scc)) ) 1142 { 1143 scc_start_defer(scc); 1144 scc_start_tx_timer(scc, t_dwait, scc->kiss.slottime); 1145 return ; 1146 } 1147 } 1148 1149 if ( !(scc->wreg[R5] & RTS) ) 1150 { 1151 scc_key_trx(scc, TX_ON); 1152 scc_start_tx_timer(scc, t_txdelay, scc->kiss.txdelay); 1153 } else { 1154 scc_start_tx_timer(scc, t_txdelay, 0); 1155 } 1156 } 1157 1158 1159 /* TXDELAY expired 1160 * 1161 * kick transmission by a fake scc_txint(scc), start 'maxkeyup' watchdog. 1162 */ 1163 1164 static void t_txdelay(unsigned long channel) 1165 { 1166 struct scc_channel *scc = (struct scc_channel *) channel; 1167 1168 scc_start_maxkeyup(scc); 1169 1170 if (scc->tx_buff == NULL) 1171 { 1172 disable_irq(scc->irq); 1173 scc_txint(scc); 1174 enable_irq(scc->irq); 1175 } 1176 } 1177 1178 1179 /* TAILTIME expired 1180 * 1181 * switch off transmitter. If we were stopped by Maxkeyup restart 1182 * transmission after 'mintime' seconds 1183 */ 1184 1185 static void t_tail(unsigned long channel) 1186 { 1187 struct scc_channel *scc = (struct scc_channel *) channel; 1188 unsigned long flags; 1189 1190 spin_lock_irqsave(&scc->lock, flags); 1191 del_timer(&scc->tx_wdog); 1192 scc_key_trx(scc, TX_OFF); 1193 spin_unlock_irqrestore(&scc->lock, flags); 1194 1195 if (scc->stat.tx_state == TXS_TIMEOUT) /* we had a timeout? */ 1196 { 1197 scc->stat.tx_state = TXS_WAIT; 1198 scc_start_tx_timer(scc, t_dwait, scc->kiss.mintime*100); 1199 return; 1200 } 1201 1202 scc->stat.tx_state = TXS_IDLE; 1203 netif_wake_queue(scc->dev); 1204 } 1205 1206 1207 /* BUSY timeout 1208 * 1209 * throw away send buffers if DCD remains active too long. 1210 */ 1211 1212 static void t_busy(unsigned long channel) 1213 { 1214 struct scc_channel *scc = (struct scc_channel *) channel; 1215 1216 del_timer(&scc->tx_t); 1217 netif_stop_queue(scc->dev); /* don't pile on the wabbit! */ 1218 1219 scc_discard_buffers(scc); 1220 scc->stat.txerrs++; 1221 scc->stat.tx_state = TXS_IDLE; 1222 1223 netif_wake_queue(scc->dev); 1224 } 1225 1226 /* MAXKEYUP timeout 1227 * 1228 * this is our watchdog. 1229 */ 1230 1231 static void t_maxkeyup(unsigned long channel) 1232 { 1233 struct scc_channel *scc = (struct scc_channel *) channel; 1234 unsigned long flags; 1235 1236 spin_lock_irqsave(&scc->lock, flags); 1237 /* 1238 * let things settle down before we start to 1239 * accept new data. 1240 */ 1241 1242 netif_stop_queue(scc->dev); 1243 scc_discard_buffers(scc); 1244 1245 del_timer(&scc->tx_t); 1246 1247 cl(scc, R1, TxINT_ENAB); /* force an ABORT, but don't */ 1248 cl(scc, R15, TxUIE); /* count it. */ 1249 OutReg(scc->ctrl, R0, RES_Tx_P); 1250 1251 spin_unlock_irqrestore(&scc->lock, flags); 1252 1253 scc->stat.txerrs++; 1254 scc->stat.tx_state = TXS_TIMEOUT; 1255 scc_start_tx_timer(scc, t_tail, scc->kiss.tailtime); 1256 } 1257 1258 /* IDLE timeout 1259 * 1260 * in fulldup mode 2 it keys down the transmitter after 'idle' seconds 1261 * of inactivity. We will not restart transmission before 'mintime' 1262 * expires. 1263 */ 1264 1265 static void t_idle(unsigned long channel) 1266 { 1267 struct scc_channel *scc = (struct scc_channel *) channel; 1268 1269 del_timer(&scc->tx_wdog); 1270 1271 scc_key_trx(scc, TX_OFF); 1272 if(scc->kiss.mintime) 1273 scc_start_tx_timer(scc, t_dwait, scc->kiss.mintime*100); 1274 scc->stat.tx_state = TXS_WAIT; 1275 } 1276 1277 static void scc_init_timer(struct scc_channel *scc) 1278 { 1279 unsigned long flags; 1280 1281 spin_lock_irqsave(&scc->lock, flags); 1282 scc->stat.tx_state = TXS_IDLE; 1283 spin_unlock_irqrestore(&scc->lock, flags); 1284 } 1285 1286 1287 /* ******************************************************************** */ 1288 /* * Set/get L1 parameters * */ 1289 /* ******************************************************************** */ 1290 1291 1292 /* 1293 * this will set the "hardware" parameters through KISS commands or ioctl() 1294 */ 1295 1296 #define CAST(x) (unsigned long)(x) 1297 1298 static unsigned int scc_set_param(struct scc_channel *scc, unsigned int cmd, unsigned int arg) 1299 { 1300 switch (cmd) 1301 { 1302 case PARAM_TXDELAY: scc->kiss.txdelay=arg; break; 1303 case PARAM_PERSIST: scc->kiss.persist=arg; break; 1304 case PARAM_SLOTTIME: scc->kiss.slottime=arg; break; 1305 case PARAM_TXTAIL: scc->kiss.tailtime=arg; break; 1306 case PARAM_FULLDUP: scc->kiss.fulldup=arg; break; 1307 case PARAM_DTR: break; /* does someone need this? */ 1308 case PARAM_GROUP: scc->kiss.group=arg; break; 1309 case PARAM_IDLE: scc->kiss.idletime=arg; break; 1310 case PARAM_MIN: scc->kiss.mintime=arg; break; 1311 case PARAM_MAXKEY: scc->kiss.maxkeyup=arg; break; 1312 case PARAM_WAIT: scc->kiss.waittime=arg; break; 1313 case PARAM_MAXDEFER: scc->kiss.maxdefer=arg; break; 1314 case PARAM_TX: scc->kiss.tx_inhibit=arg; break; 1315 1316 case PARAM_SOFTDCD: 1317 scc->kiss.softdcd=arg; 1318 if (arg) 1319 { 1320 or(scc, R15, SYNCIE); 1321 cl(scc, R15, DCDIE); 1322 start_hunt(scc); 1323 } else { 1324 or(scc, R15, DCDIE); 1325 cl(scc, R15, SYNCIE); 1326 } 1327 break; 1328 1329 case PARAM_SPEED: 1330 if (arg < 256) 1331 scc->modem.speed=arg*100; 1332 else 1333 scc->modem.speed=arg; 1334 1335 if (scc->stat.tx_state == 0) /* only switch baudrate on rx... ;-) */ 1336 set_speed(scc); 1337 break; 1338 1339 case PARAM_RTS: 1340 if ( !(scc->wreg[R5] & RTS) ) 1341 { 1342 if (arg != TX_OFF) 1343 scc_key_trx(scc, TX_ON); 1344 scc_start_tx_timer(scc, t_txdelay, scc->kiss.txdelay); 1345 } else { 1346 if (arg == TX_OFF) 1347 { 1348 scc->stat.tx_state = TXS_BUSY; 1349 scc_start_tx_timer(scc, t_tail, scc->kiss.tailtime); 1350 } 1351 } 1352 break; 1353 1354 case PARAM_HWEVENT: 1355 scc_notify(scc, scc->dcd? HWEV_DCD_ON:HWEV_DCD_OFF); 1356 break; 1357 1358 default: return -EINVAL; 1359 } 1360 1361 return 0; 1362 } 1363 1364 1365 1366 static unsigned long scc_get_param(struct scc_channel *scc, unsigned int cmd) 1367 { 1368 switch (cmd) 1369 { 1370 case PARAM_TXDELAY: return CAST(scc->kiss.txdelay); 1371 case PARAM_PERSIST: return CAST(scc->kiss.persist); 1372 case PARAM_SLOTTIME: return CAST(scc->kiss.slottime); 1373 case PARAM_TXTAIL: return CAST(scc->kiss.tailtime); 1374 case PARAM_FULLDUP: return CAST(scc->kiss.fulldup); 1375 case PARAM_SOFTDCD: return CAST(scc->kiss.softdcd); 1376 case PARAM_DTR: return CAST((scc->wreg[R5] & DTR)? 1:0); 1377 case PARAM_RTS: return CAST((scc->wreg[R5] & RTS)? 1:0); 1378 case PARAM_SPEED: return CAST(scc->modem.speed); 1379 case PARAM_GROUP: return CAST(scc->kiss.group); 1380 case PARAM_IDLE: return CAST(scc->kiss.idletime); 1381 case PARAM_MIN: return CAST(scc->kiss.mintime); 1382 case PARAM_MAXKEY: return CAST(scc->kiss.maxkeyup); 1383 case PARAM_WAIT: return CAST(scc->kiss.waittime); 1384 case PARAM_MAXDEFER: return CAST(scc->kiss.maxdefer); 1385 case PARAM_TX: return CAST(scc->kiss.tx_inhibit); 1386 default: return NO_SUCH_PARAM; 1387 } 1388 1389 } 1390 1391 #undef CAST 1392 1393 /* ******************************************************************* */ 1394 /* * Send calibration pattern * */ 1395 /* ******************************************************************* */ 1396 1397 static void scc_stop_calibrate(unsigned long channel) 1398 { 1399 struct scc_channel *scc = (struct scc_channel *) channel; 1400 unsigned long flags; 1401 1402 spin_lock_irqsave(&scc->lock, flags); 1403 del_timer(&scc->tx_wdog); 1404 scc_key_trx(scc, TX_OFF); 1405 wr(scc, R6, 0); 1406 wr(scc, R7, FLAG); 1407 Outb(scc->ctrl,RES_EXT_INT); /* reset ext/status interrupts */ 1408 Outb(scc->ctrl,RES_EXT_INT); 1409 1410 netif_wake_queue(scc->dev); 1411 spin_unlock_irqrestore(&scc->lock, flags); 1412 } 1413 1414 1415 static void 1416 scc_start_calibrate(struct scc_channel *scc, int duration, unsigned char pattern) 1417 { 1418 unsigned long flags; 1419 1420 spin_lock_irqsave(&scc->lock, flags); 1421 netif_stop_queue(scc->dev); 1422 scc_discard_buffers(scc); 1423 1424 del_timer(&scc->tx_wdog); 1425 1426 scc->tx_wdog.data = (unsigned long) scc; 1427 scc->tx_wdog.function = scc_stop_calibrate; 1428 scc->tx_wdog.expires = jiffies + HZ*duration; 1429 add_timer(&scc->tx_wdog); 1430 1431 /* This doesn't seem to work. Why not? */ 1432 wr(scc, R6, 0); 1433 wr(scc, R7, pattern); 1434 1435 /* 1436 * Don't know if this works. 1437 * Damn, where is my Z8530 programming manual...? 1438 */ 1439 1440 Outb(scc->ctrl,RES_EXT_INT); /* reset ext/status interrupts */ 1441 Outb(scc->ctrl,RES_EXT_INT); 1442 1443 scc_key_trx(scc, TX_ON); 1444 spin_unlock_irqrestore(&scc->lock, flags); 1445 } 1446 1447 /* ******************************************************************* */ 1448 /* * Init channel structures, special HW, etc... * */ 1449 /* ******************************************************************* */ 1450 1451 /* 1452 * Reset the Z8530s and setup special hardware 1453 */ 1454 1455 static void z8530_init(void) 1456 { 1457 struct scc_channel *scc; 1458 int chip, k; 1459 unsigned long flags; 1460 char *flag; 1461 1462 1463 printk(KERN_INFO "Init Z8530 driver: %u channels, IRQ", Nchips*2); 1464 1465 flag=" "; 1466 for (k = 0; k < NR_IRQS; k++) 1467 if (Ivec[k].used) 1468 { 1469 printk("%s%d", flag, k); 1470 flag=","; 1471 } 1472 printk("\n"); 1473 1474 1475 /* reset and pre-init all chips in the system */ 1476 for (chip = 0; chip < Nchips; chip++) 1477 { 1478 scc=&SCC_Info[2*chip]; 1479 if (!scc->ctrl) continue; 1480 1481 /* Special SCC cards */ 1482 1483 if(scc->brand & EAGLE) /* this is an EAGLE card */ 1484 Outb(scc->special,0x08); /* enable interrupt on the board */ 1485 1486 if(scc->brand & (PC100 | PRIMUS)) /* this is a PC100/PRIMUS card */ 1487 Outb(scc->special,scc->option); /* set the MODEM mode (0x22) */ 1488 1489 1490 /* Reset and pre-init Z8530 */ 1491 1492 spin_lock_irqsave(&scc->lock, flags); 1493 1494 Outb(scc->ctrl, 0); 1495 OutReg(scc->ctrl,R9,FHWRES); /* force hardware reset */ 1496 udelay(100); /* give it 'a bit' more time than required */ 1497 wr(scc, R2, chip*16); /* interrupt vector */ 1498 wr(scc, R9, VIS); /* vector includes status */ 1499 spin_unlock_irqrestore(&scc->lock, flags); 1500 } 1501 1502 1503 Driver_Initialized = 1; 1504 } 1505 1506 /* 1507 * Allocate device structure, err, instance, and register driver 1508 */ 1509 1510 static int scc_net_alloc(const char *name, struct scc_channel *scc) 1511 { 1512 int err; 1513 struct net_device *dev; 1514 1515 dev = alloc_netdev(0, name, scc_net_setup); 1516 if (!dev) 1517 return -ENOMEM; 1518 1519 dev->priv = scc; 1520 scc->dev = dev; 1521 spin_lock_init(&scc->lock); 1522 init_timer(&scc->tx_t); 1523 init_timer(&scc->tx_wdog); 1524 1525 err = register_netdevice(dev); 1526 if (err) { 1527 printk(KERN_ERR "%s: can't register network device (%d)\n", 1528 name, err); 1529 free_netdev(dev); 1530 scc->dev = NULL; 1531 return err; 1532 } 1533 1534 return 0; 1535 } 1536 1537 1538 1539 /* ******************************************************************** */ 1540 /* * Network driver methods * */ 1541 /* ******************************************************************** */ 1542 1543 static unsigned char ax25_bcast[AX25_ADDR_LEN] = 1544 {'Q' << 1, 'S' << 1, 'T' << 1, ' ' << 1, ' ' << 1, ' ' << 1, '0' << 1}; 1545 static unsigned char ax25_nocall[AX25_ADDR_LEN] = 1546 {'L' << 1, 'I' << 1, 'N' << 1, 'U' << 1, 'X' << 1, ' ' << 1, '1' << 1}; 1547 1548 /* ----> Initialize device <----- */ 1549 1550 static void scc_net_setup(struct net_device *dev) 1551 { 1552 dev->tx_queue_len = 16; /* should be enough... */ 1553 1554 dev->open = scc_net_open; 1555 dev->stop = scc_net_close; 1556 1557 dev->hard_start_xmit = scc_net_tx; 1558 dev->hard_header = ax25_hard_header; 1559 dev->rebuild_header = ax25_rebuild_header; 1560 dev->set_mac_address = scc_net_set_mac_address; 1561 dev->get_stats = scc_net_get_stats; 1562 dev->do_ioctl = scc_net_ioctl; 1563 dev->tx_timeout = NULL; 1564 1565 memcpy(dev->broadcast, ax25_bcast, AX25_ADDR_LEN); 1566 memcpy(dev->dev_addr, ax25_nocall, AX25_ADDR_LEN); 1567 1568 dev->flags = 0; 1569 1570 dev->type = ARPHRD_AX25; 1571 dev->hard_header_len = AX25_MAX_HEADER_LEN + AX25_BPQ_HEADER_LEN; 1572 dev->mtu = AX25_DEF_PACLEN; 1573 dev->addr_len = AX25_ADDR_LEN; 1574 1575 } 1576 1577 /* ----> open network device <---- */ 1578 1579 static int scc_net_open(struct net_device *dev) 1580 { 1581 struct scc_channel *scc = (struct scc_channel *) dev->priv; 1582 1583 if (!scc->init) 1584 return -EINVAL; 1585 1586 scc->tx_buff = NULL; 1587 skb_queue_head_init(&scc->tx_queue); 1588 1589 init_channel(scc); 1590 1591 netif_start_queue(dev); 1592 return 0; 1593 } 1594 1595 /* ----> close network device <---- */ 1596 1597 static int scc_net_close(struct net_device *dev) 1598 { 1599 struct scc_channel *scc = (struct scc_channel *) dev->priv; 1600 unsigned long flags; 1601 1602 netif_stop_queue(dev); 1603 1604 spin_lock_irqsave(&scc->lock, flags); 1605 Outb(scc->ctrl,0); /* Make sure pointer is written */ 1606 wr(scc,R1,0); /* disable interrupts */ 1607 wr(scc,R3,0); 1608 spin_unlock_irqrestore(&scc->lock, flags); 1609 1610 del_timer_sync(&scc->tx_t); 1611 del_timer_sync(&scc->tx_wdog); 1612 1613 scc_discard_buffers(scc); 1614 1615 return 0; 1616 } 1617 1618 /* ----> receive frame, called from scc_rxint() <---- */ 1619 1620 static void scc_net_rx(struct scc_channel *scc, struct sk_buff *skb) 1621 { 1622 if (skb->len == 0) { 1623 dev_kfree_skb_irq(skb); 1624 return; 1625 } 1626 1627 scc->dev_stat.rx_packets++; 1628 scc->dev_stat.rx_bytes += skb->len; 1629 1630 skb->protocol = ax25_type_trans(skb, scc->dev); 1631 1632 netif_rx(skb); 1633 scc->dev->last_rx = jiffies; 1634 return; 1635 } 1636 1637 /* ----> transmit frame <---- */ 1638 1639 static int scc_net_tx(struct sk_buff *skb, struct net_device *dev) 1640 { 1641 struct scc_channel *scc = (struct scc_channel *) dev->priv; 1642 unsigned long flags; 1643 char kisscmd; 1644 1645 if (skb->len > scc->stat.bufsize || skb->len < 2) { 1646 scc->dev_stat.tx_dropped++; /* bogus frame */ 1647 dev_kfree_skb(skb); 1648 return 0; 1649 } 1650 1651 scc->dev_stat.tx_packets++; 1652 scc->dev_stat.tx_bytes += skb->len; 1653 scc->stat.txframes++; 1654 1655 kisscmd = *skb->data & 0x1f; 1656 skb_pull(skb, 1); 1657 1658 if (kisscmd) { 1659 scc_set_param(scc, kisscmd, *skb->data); 1660 dev_kfree_skb(skb); 1661 return 0; 1662 } 1663 1664 spin_lock_irqsave(&scc->lock, flags); 1665 1666 if (skb_queue_len(&scc->tx_queue) > scc->dev->tx_queue_len) { 1667 struct sk_buff *skb_del; 1668 skb_del = skb_dequeue(&scc->tx_queue); 1669 dev_kfree_skb(skb_del); 1670 } 1671 skb_queue_tail(&scc->tx_queue, skb); 1672 dev->trans_start = jiffies; 1673 1674 1675 /* 1676 * Start transmission if the trx state is idle or 1677 * t_idle hasn't expired yet. Use dwait/persistence/slottime 1678 * algorithm for normal halfduplex operation. 1679 */ 1680 1681 if(scc->stat.tx_state == TXS_IDLE || scc->stat.tx_state == TXS_IDLE2) { 1682 scc->stat.tx_state = TXS_BUSY; 1683 if (scc->kiss.fulldup == KISS_DUPLEX_HALF) 1684 __scc_start_tx_timer(scc, t_dwait, scc->kiss.waittime); 1685 else 1686 __scc_start_tx_timer(scc, t_dwait, 0); 1687 } 1688 spin_unlock_irqrestore(&scc->lock, flags); 1689 return 0; 1690 } 1691 1692 /* ----> ioctl functions <---- */ 1693 1694 /* 1695 * SIOCSCCCFG - configure driver arg: (struct scc_hw_config *) arg 1696 * SIOCSCCINI - initialize driver arg: --- 1697 * SIOCSCCCHANINI - initialize channel arg: (struct scc_modem *) arg 1698 * SIOCSCCSMEM - set memory arg: (struct scc_mem_config *) arg 1699 * SIOCSCCGKISS - get level 1 parameter arg: (struct scc_kiss_cmd *) arg 1700 * SIOCSCCSKISS - set level 1 parameter arg: (struct scc_kiss_cmd *) arg 1701 * SIOCSCCGSTAT - get driver status arg: (struct scc_stat *) arg 1702 * SIOCSCCCAL - send calib. pattern arg: (struct scc_calibrate *) arg 1703 */ 1704 1705 static int scc_net_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd) 1706 { 1707 struct scc_kiss_cmd kiss_cmd; 1708 struct scc_mem_config memcfg; 1709 struct scc_hw_config hwcfg; 1710 struct scc_calibrate cal; 1711 struct scc_channel *scc = (struct scc_channel *) dev->priv; 1712 int chan; 1713 unsigned char device_name[IFNAMSIZ]; 1714 void __user *arg = ifr->ifr_data; 1715 1716 1717 if (!Driver_Initialized) 1718 { 1719 if (cmd == SIOCSCCCFG) 1720 { 1721 int found = 1; 1722 1723 if (!capable(CAP_SYS_RAWIO)) return -EPERM; 1724 if (!arg) return -EFAULT; 1725 1726 if (Nchips >= SCC_MAXCHIPS) 1727 return -EINVAL; 1728 1729 if (copy_from_user(&hwcfg, arg, sizeof(hwcfg))) 1730 return -EFAULT; 1731 1732 if (hwcfg.irq == 2) hwcfg.irq = 9; 1733 1734 if (hwcfg.irq < 0 || hwcfg.irq >= NR_IRQS) 1735 return -EINVAL; 1736 1737 if (!Ivec[hwcfg.irq].used && hwcfg.irq) 1738 { 1739 if (request_irq(hwcfg.irq, scc_isr, IRQF_DISABLED, "AX.25 SCC", NULL)) 1740 printk(KERN_WARNING "z8530drv: warning, cannot get IRQ %d\n", hwcfg.irq); 1741 else 1742 Ivec[hwcfg.irq].used = 1; 1743 } 1744 1745 if (hwcfg.vector_latch && !Vector_Latch) { 1746 if (!request_region(hwcfg.vector_latch, 1, "scc vector latch")) 1747 printk(KERN_WARNING "z8530drv: warning, cannot reserve vector latch port 0x%lx\n, disabled.", hwcfg.vector_latch); 1748 else 1749 Vector_Latch = hwcfg.vector_latch; 1750 } 1751 1752 if (hwcfg.clock == 0) 1753 hwcfg.clock = SCC_DEFAULT_CLOCK; 1754 1755 #ifndef SCC_DONT_CHECK 1756 1757 if(request_region(hwcfg.ctrl_a, 1, "scc-probe")) 1758 { 1759 disable_irq(hwcfg.irq); 1760 Outb(hwcfg.ctrl_a, 0); 1761 OutReg(hwcfg.ctrl_a, R9, FHWRES); 1762 udelay(100); 1763 OutReg(hwcfg.ctrl_a,R13,0x55); /* is this chip really there? */ 1764 udelay(5); 1765 1766 if (InReg(hwcfg.ctrl_a,R13) != 0x55) 1767 found = 0; 1768 enable_irq(hwcfg.irq); 1769 release_region(hwcfg.ctrl_a, 1); 1770 } 1771 else 1772 found = 0; 1773 #endif 1774 1775 if (found) 1776 { 1777 SCC_Info[2*Nchips ].ctrl = hwcfg.ctrl_a; 1778 SCC_Info[2*Nchips ].data = hwcfg.data_a; 1779 SCC_Info[2*Nchips ].irq = hwcfg.irq; 1780 SCC_Info[2*Nchips+1].ctrl = hwcfg.ctrl_b; 1781 SCC_Info[2*Nchips+1].data = hwcfg.data_b; 1782 SCC_Info[2*Nchips+1].irq = hwcfg.irq; 1783 1784 SCC_ctrl[Nchips].chan_A = hwcfg.ctrl_a; 1785 SCC_ctrl[Nchips].chan_B = hwcfg.ctrl_b; 1786 SCC_ctrl[Nchips].irq = hwcfg.irq; 1787 } 1788 1789 1790 for (chan = 0; chan < 2; chan++) 1791 { 1792 sprintf(device_name, "%s%i", SCC_DriverName, 2*Nchips+chan); 1793 1794 SCC_Info[2*Nchips+chan].special = hwcfg.special; 1795 SCC_Info[2*Nchips+chan].clock = hwcfg.clock; 1796 SCC_Info[2*Nchips+chan].brand = hwcfg.brand; 1797 SCC_Info[2*Nchips+chan].option = hwcfg.option; 1798 SCC_Info[2*Nchips+chan].enhanced = hwcfg.escc; 1799 1800 #ifdef SCC_DONT_CHECK 1801 printk(KERN_INFO "%s: data port = 0x%3.3x control port = 0x%3.3x\n", 1802 device_name, 1803 SCC_Info[2*Nchips+chan].data, 1804 SCC_Info[2*Nchips+chan].ctrl); 1805 1806 #else 1807 printk(KERN_INFO "%s: data port = 0x%3.3lx control port = 0x%3.3lx -- %s\n", 1808 device_name, 1809 chan? hwcfg.data_b : hwcfg.data_a, 1810 chan? hwcfg.ctrl_b : hwcfg.ctrl_a, 1811 found? "found" : "missing"); 1812 #endif 1813 1814 if (found) 1815 { 1816 request_region(SCC_Info[2*Nchips+chan].ctrl, 1, "scc ctrl"); 1817 request_region(SCC_Info[2*Nchips+chan].data, 1, "scc data"); 1818 if (Nchips+chan != 0 && 1819 scc_net_alloc(device_name, 1820 &SCC_Info[2*Nchips+chan])) 1821 return -EINVAL; 1822 } 1823 } 1824 1825 if (found) Nchips++; 1826 1827 return 0; 1828 } 1829 1830 if (cmd == SIOCSCCINI) 1831 { 1832 if (!capable(CAP_SYS_RAWIO)) 1833 return -EPERM; 1834 1835 if (Nchips == 0) 1836 return -EINVAL; 1837 1838 z8530_init(); 1839 return 0; 1840 } 1841 1842 return -EINVAL; /* confuse the user */ 1843 } 1844 1845 if (!scc->init) 1846 { 1847 if (cmd == SIOCSCCCHANINI) 1848 { 1849 if (!capable(CAP_NET_ADMIN)) return -EPERM; 1850 if (!arg) return -EINVAL; 1851 1852 scc->stat.bufsize = SCC_BUFSIZE; 1853 1854 if (copy_from_user(&scc->modem, arg, sizeof(struct scc_modem))) 1855 return -EINVAL; 1856 1857 /* default KISS Params */ 1858 1859 if (scc->modem.speed < 4800) 1860 { 1861 scc->kiss.txdelay = 36; /* 360 ms */ 1862 scc->kiss.persist = 42; /* 25% persistence */ /* was 25 */ 1863 scc->kiss.slottime = 16; /* 160 ms */ 1864 scc->kiss.tailtime = 4; /* minimal reasonable value */ 1865 scc->kiss.fulldup = 0; /* CSMA */ 1866 scc->kiss.waittime = 50; /* 500 ms */ 1867 scc->kiss.maxkeyup = 10; /* 10 s */ 1868 scc->kiss.mintime = 3; /* 3 s */ 1869 scc->kiss.idletime = 30; /* 30 s */ 1870 scc->kiss.maxdefer = 120; /* 2 min */ 1871 scc->kiss.softdcd = 0; /* hardware dcd */ 1872 } else { 1873 scc->kiss.txdelay = 10; /* 100 ms */ 1874 scc->kiss.persist = 64; /* 25% persistence */ /* was 25 */ 1875 scc->kiss.slottime = 8; /* 160 ms */ 1876 scc->kiss.tailtime = 1; /* minimal reasonable value */ 1877 scc->kiss.fulldup = 0; /* CSMA */ 1878 scc->kiss.waittime = 50; /* 500 ms */ 1879 scc->kiss.maxkeyup = 7; /* 7 s */ 1880 scc->kiss.mintime = 3; /* 3 s */ 1881 scc->kiss.idletime = 30; /* 30 s */ 1882 scc->kiss.maxdefer = 120; /* 2 min */ 1883 scc->kiss.softdcd = 0; /* hardware dcd */ 1884 } 1885 1886 scc->tx_buff = NULL; 1887 skb_queue_head_init(&scc->tx_queue); 1888 scc->init = 1; 1889 1890 return 0; 1891 } 1892 1893 return -EINVAL; 1894 } 1895 1896 switch(cmd) 1897 { 1898 case SIOCSCCRESERVED: 1899 return -ENOIOCTLCMD; 1900 1901 case SIOCSCCSMEM: 1902 if (!capable(CAP_SYS_RAWIO)) return -EPERM; 1903 if (!arg || copy_from_user(&memcfg, arg, sizeof(memcfg))) 1904 return -EINVAL; 1905 scc->stat.bufsize = memcfg.bufsize; 1906 return 0; 1907 1908 case SIOCSCCGSTAT: 1909 if (!arg || copy_to_user(arg, &scc->stat, sizeof(scc->stat))) 1910 return -EINVAL; 1911 return 0; 1912 1913 case SIOCSCCGKISS: 1914 if (!arg || copy_from_user(&kiss_cmd, arg, sizeof(kiss_cmd))) 1915 return -EINVAL; 1916 kiss_cmd.param = scc_get_param(scc, kiss_cmd.command); 1917 if (copy_to_user(arg, &kiss_cmd, sizeof(kiss_cmd))) 1918 return -EINVAL; 1919 return 0; 1920 1921 case SIOCSCCSKISS: 1922 if (!capable(CAP_NET_ADMIN)) return -EPERM; 1923 if (!arg || copy_from_user(&kiss_cmd, arg, sizeof(kiss_cmd))) 1924 return -EINVAL; 1925 return scc_set_param(scc, kiss_cmd.command, kiss_cmd.param); 1926 1927 case SIOCSCCCAL: 1928 if (!capable(CAP_SYS_RAWIO)) return -EPERM; 1929 if (!arg || copy_from_user(&cal, arg, sizeof(cal)) || cal.time == 0) 1930 return -EINVAL; 1931 1932 scc_start_calibrate(scc, cal.time, cal.pattern); 1933 return 0; 1934 1935 default: 1936 return -ENOIOCTLCMD; 1937 1938 } 1939 1940 return -EINVAL; 1941 } 1942 1943 /* ----> set interface callsign <---- */ 1944 1945 static int scc_net_set_mac_address(struct net_device *dev, void *addr) 1946 { 1947 struct sockaddr *sa = (struct sockaddr *) addr; 1948 memcpy(dev->dev_addr, sa->sa_data, dev->addr_len); 1949 return 0; 1950 } 1951 1952 /* ----> get statistics <---- */ 1953 1954 static struct net_device_stats *scc_net_get_stats(struct net_device *dev) 1955 { 1956 struct scc_channel *scc = (struct scc_channel *) dev->priv; 1957 1958 scc->dev_stat.rx_errors = scc->stat.rxerrs + scc->stat.rx_over; 1959 scc->dev_stat.tx_errors = scc->stat.txerrs + scc->stat.tx_under; 1960 scc->dev_stat.rx_fifo_errors = scc->stat.rx_over; 1961 scc->dev_stat.tx_fifo_errors = scc->stat.tx_under; 1962 1963 return &scc->dev_stat; 1964 } 1965 1966 /* ******************************************************************** */ 1967 /* * dump statistics to /proc/net/z8530drv * */ 1968 /* ******************************************************************** */ 1969 1970 #ifdef CONFIG_PROC_FS 1971 1972 static inline struct scc_channel *scc_net_seq_idx(loff_t pos) 1973 { 1974 int k; 1975 1976 for (k = 0; k < Nchips*2; ++k) { 1977 if (!SCC_Info[k].init) 1978 continue; 1979 if (pos-- == 0) 1980 return &SCC_Info[k]; 1981 } 1982 return NULL; 1983 } 1984 1985 static void *scc_net_seq_start(struct seq_file *seq, loff_t *pos) 1986 { 1987 return *pos ? scc_net_seq_idx(*pos - 1) : SEQ_START_TOKEN; 1988 1989 } 1990 1991 static void *scc_net_seq_next(struct seq_file *seq, void *v, loff_t *pos) 1992 { 1993 unsigned k; 1994 struct scc_channel *scc = v; 1995 ++*pos; 1996 1997 for (k = (v == SEQ_START_TOKEN) ? 0 : (scc - SCC_Info)+1; 1998 k < Nchips*2; ++k) { 1999 if (SCC_Info[k].init) 2000 return &SCC_Info[k]; 2001 } 2002 return NULL; 2003 } 2004 2005 static void scc_net_seq_stop(struct seq_file *seq, void *v) 2006 { 2007 } 2008 2009 static int scc_net_seq_show(struct seq_file *seq, void *v) 2010 { 2011 if (v == SEQ_START_TOKEN) { 2012 seq_puts(seq, "z8530drv-"VERSION"\n"); 2013 } else if (!Driver_Initialized) { 2014 seq_puts(seq, "not initialized\n"); 2015 } else if (!Nchips) { 2016 seq_puts(seq, "chips missing\n"); 2017 } else { 2018 const struct scc_channel *scc = v; 2019 const struct scc_stat *stat = &scc->stat; 2020 const struct scc_kiss *kiss = &scc->kiss; 2021 2022 2023 /* dev data ctrl irq clock brand enh vector special option 2024 * baud nrz clocksrc softdcd bufsize 2025 * rxints txints exints spints 2026 * rcvd rxerrs over / xmit txerrs under / nospace bufsize 2027 * txd pers slot tail ful wait min maxk idl defr txof grp 2028 * W ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## 2029 * R ## ## XX ## ## ## ## ## XX ## ## ## ## ## ## ## 2030 */ 2031 2032 seq_printf(seq, "%s\t%3.3lx %3.3lx %d %lu %2.2x %d %3.3lx %3.3lx %d\n", 2033 scc->dev->name, 2034 scc->data, scc->ctrl, scc->irq, scc->clock, scc->brand, 2035 scc->enhanced, Vector_Latch, scc->special, 2036 scc->option); 2037 seq_printf(seq, "\t%lu %d %d %d %d\n", 2038 scc->modem.speed, scc->modem.nrz, 2039 scc->modem.clocksrc, kiss->softdcd, 2040 stat->bufsize); 2041 seq_printf(seq, "\t%lu %lu %lu %lu\n", 2042 stat->rxints, stat->txints, stat->exints, stat->spints); 2043 seq_printf(seq, "\t%lu %lu %d / %lu %lu %d / %d %d\n", 2044 stat->rxframes, stat->rxerrs, stat->rx_over, 2045 stat->txframes, stat->txerrs, stat->tx_under, 2046 stat->nospace, stat->tx_state); 2047 2048 #define K(x) kiss->x 2049 seq_printf(seq, "\t%d %d %d %d %d %d %d %d %d %d %d %d\n", 2050 K(txdelay), K(persist), K(slottime), K(tailtime), 2051 K(fulldup), K(waittime), K(mintime), K(maxkeyup), 2052 K(idletime), K(maxdefer), K(tx_inhibit), K(group)); 2053 #undef K 2054 #ifdef SCC_DEBUG 2055 { 2056 int reg; 2057 2058 seq_printf(seq, "\tW "); 2059 for (reg = 0; reg < 16; reg++) 2060 seq_printf(seq, "%2.2x ", scc->wreg[reg]); 2061 seq_printf(seq, "\n"); 2062 2063 seq_printf(seq, "\tR %2.2x %2.2x XX ", InReg(scc->ctrl,R0), InReg(scc->ctrl,R1)); 2064 for (reg = 3; reg < 8; reg++) 2065 seq_printf(seq, "%2.2x ", InReg(scc->ctrl, reg)); 2066 seq_printf(seq, "XX "); 2067 for (reg = 9; reg < 16; reg++) 2068 seq_printf(seq, "%2.2x ", InReg(scc->ctrl, reg)); 2069 seq_printf(seq, "\n"); 2070 } 2071 #endif 2072 seq_putc(seq, '\n'); 2073 } 2074 2075 return 0; 2076 } 2077 2078 static struct seq_operations scc_net_seq_ops = { 2079 .start = scc_net_seq_start, 2080 .next = scc_net_seq_next, 2081 .stop = scc_net_seq_stop, 2082 .show = scc_net_seq_show, 2083 }; 2084 2085 2086 static int scc_net_seq_open(struct inode *inode, struct file *file) 2087 { 2088 return seq_open(file, &scc_net_seq_ops); 2089 } 2090 2091 static struct file_operations scc_net_seq_fops = { 2092 .owner = THIS_MODULE, 2093 .open = scc_net_seq_open, 2094 .read = seq_read, 2095 .llseek = seq_lseek, 2096 .release = seq_release_private, 2097 }; 2098 2099 #endif /* CONFIG_PROC_FS */ 2100 2101 2102 /* ******************************************************************** */ 2103 /* * Init SCC driver * */ 2104 /* ******************************************************************** */ 2105 2106 static int __init scc_init_driver (void) 2107 { 2108 char devname[IFNAMSIZ]; 2109 2110 printk(banner); 2111 2112 sprintf(devname,"%s0", SCC_DriverName); 2113 2114 rtnl_lock(); 2115 if (scc_net_alloc(devname, SCC_Info)) { 2116 rtnl_unlock(); 2117 printk(KERN_ERR "z8530drv: cannot initialize module\n"); 2118 return -EIO; 2119 } 2120 rtnl_unlock(); 2121 2122 proc_net_fops_create("z8530drv", 0, &scc_net_seq_fops); 2123 2124 return 0; 2125 } 2126 2127 static void __exit scc_cleanup_driver(void) 2128 { 2129 io_port ctrl; 2130 int k; 2131 struct scc_channel *scc; 2132 struct net_device *dev; 2133 2134 if (Nchips == 0 && (dev = SCC_Info[0].dev)) 2135 { 2136 unregister_netdev(dev); 2137 free_netdev(dev); 2138 } 2139 2140 /* Guard against chip prattle */ 2141 local_irq_disable(); 2142 2143 for (k = 0; k < Nchips; k++) 2144 if ( (ctrl = SCC_ctrl[k].chan_A) ) 2145 { 2146 Outb(ctrl, 0); 2147 OutReg(ctrl,R9,FHWRES); /* force hardware reset */ 2148 udelay(50); 2149 } 2150 2151 /* To unload the port must be closed so no real IRQ pending */ 2152 for (k=0; k < NR_IRQS ; k++) 2153 if (Ivec[k].used) free_irq(k, NULL); 2154 2155 local_irq_enable(); 2156 2157 /* Now clean up */ 2158 for (k = 0; k < Nchips*2; k++) 2159 { 2160 scc = &SCC_Info[k]; 2161 if (scc->ctrl) 2162 { 2163 release_region(scc->ctrl, 1); 2164 release_region(scc->data, 1); 2165 } 2166 if (scc->dev) 2167 { 2168 unregister_netdev(scc->dev); 2169 free_netdev(scc->dev); 2170 } 2171 } 2172 2173 2174 if (Vector_Latch) 2175 release_region(Vector_Latch, 1); 2176 2177 proc_net_remove("z8530drv"); 2178 } 2179 2180 MODULE_AUTHOR("Joerg Reuter <jreuter@yaina.de>"); 2181 MODULE_DESCRIPTION("AX.25 Device Driver for Z8530 based HDLC cards"); 2182 MODULE_SUPPORTED_DEVICE("Z8530 based SCC cards for Amateur Radio"); 2183 MODULE_LICENSE("GPL"); 2184 module_init(scc_init_driver); 2185 module_exit(scc_cleanup_driver); 2186