1 /* 2 * Definitions for Xilinx Axi Ethernet device driver. 3 * 4 * Copyright (c) 2009 Secret Lab Technologies, Ltd. 5 * Copyright (c) 2010 - 2012 Xilinx, Inc. All rights reserved. 6 */ 7 8 #ifndef XILINX_AXIENET_H 9 #define XILINX_AXIENET_H 10 11 #include <linux/netdevice.h> 12 #include <linux/spinlock.h> 13 #include <linux/interrupt.h> 14 #include <linux/if_vlan.h> 15 16 /* Packet size info */ 17 #define XAE_HDR_SIZE 14 /* Size of Ethernet header */ 18 #define XAE_TRL_SIZE 4 /* Size of Ethernet trailer (FCS) */ 19 #define XAE_MTU 1500 /* Max MTU of an Ethernet frame */ 20 #define XAE_JUMBO_MTU 9000 /* Max MTU of a jumbo Eth. frame */ 21 22 #define XAE_MAX_FRAME_SIZE (XAE_MTU + XAE_HDR_SIZE + XAE_TRL_SIZE) 23 #define XAE_MAX_VLAN_FRAME_SIZE (XAE_MTU + VLAN_ETH_HLEN + XAE_TRL_SIZE) 24 #define XAE_MAX_JUMBO_FRAME_SIZE (XAE_JUMBO_MTU + XAE_HDR_SIZE + XAE_TRL_SIZE) 25 26 /* Configuration options */ 27 28 /* Accept all incoming packets. Default: disabled (cleared) */ 29 #define XAE_OPTION_PROMISC (1 << 0) 30 31 /* Jumbo frame support for Tx & Rx. Default: disabled (cleared) */ 32 #define XAE_OPTION_JUMBO (1 << 1) 33 34 /* VLAN Rx & Tx frame support. Default: disabled (cleared) */ 35 #define XAE_OPTION_VLAN (1 << 2) 36 37 /* Enable recognition of flow control frames on Rx. Default: enabled (set) */ 38 #define XAE_OPTION_FLOW_CONTROL (1 << 4) 39 40 /* Strip FCS and PAD from incoming frames. Note: PAD from VLAN frames is not 41 * stripped. Default: disabled (set) 42 */ 43 #define XAE_OPTION_FCS_STRIP (1 << 5) 44 45 /* Generate FCS field and add PAD automatically for outgoing frames. 46 * Default: enabled (set) 47 */ 48 #define XAE_OPTION_FCS_INSERT (1 << 6) 49 50 /* Enable Length/Type error checking for incoming frames. When this option is 51 * set, the MAC will filter frames that have a mismatched type/length field 52 * and if XAE_OPTION_REPORT_RXERR is set, the user is notified when these 53 * types of frames are encountered. When this option is cleared, the MAC will 54 * allow these types of frames to be received. Default: enabled (set) 55 */ 56 #define XAE_OPTION_LENTYPE_ERR (1 << 7) 57 58 /* Enable the transmitter. Default: enabled (set) */ 59 #define XAE_OPTION_TXEN (1 << 11) 60 61 /* Enable the receiver. Default: enabled (set) */ 62 #define XAE_OPTION_RXEN (1 << 12) 63 64 /* Default options set when device is initialized or reset */ 65 #define XAE_OPTION_DEFAULTS \ 66 (XAE_OPTION_TXEN | \ 67 XAE_OPTION_FLOW_CONTROL | \ 68 XAE_OPTION_RXEN) 69 70 /* Axi DMA Register definitions */ 71 72 #define XAXIDMA_TX_CR_OFFSET 0x00000000 /* Channel control */ 73 #define XAXIDMA_TX_SR_OFFSET 0x00000004 /* Status */ 74 #define XAXIDMA_TX_CDESC_OFFSET 0x00000008 /* Current descriptor pointer */ 75 #define XAXIDMA_TX_TDESC_OFFSET 0x00000010 /* Tail descriptor pointer */ 76 77 #define XAXIDMA_RX_CR_OFFSET 0x00000030 /* Channel control */ 78 #define XAXIDMA_RX_SR_OFFSET 0x00000034 /* Status */ 79 #define XAXIDMA_RX_CDESC_OFFSET 0x00000038 /* Current descriptor pointer */ 80 #define XAXIDMA_RX_TDESC_OFFSET 0x00000040 /* Tail descriptor pointer */ 81 82 #define XAXIDMA_CR_RUNSTOP_MASK 0x00000001 /* Start/stop DMA channel */ 83 #define XAXIDMA_CR_RESET_MASK 0x00000004 /* Reset DMA engine */ 84 85 #define XAXIDMA_BD_NDESC_OFFSET 0x00 /* Next descriptor pointer */ 86 #define XAXIDMA_BD_BUFA_OFFSET 0x08 /* Buffer address */ 87 #define XAXIDMA_BD_CTRL_LEN_OFFSET 0x18 /* Control/buffer length */ 88 #define XAXIDMA_BD_STS_OFFSET 0x1C /* Status */ 89 #define XAXIDMA_BD_USR0_OFFSET 0x20 /* User IP specific word0 */ 90 #define XAXIDMA_BD_USR1_OFFSET 0x24 /* User IP specific word1 */ 91 #define XAXIDMA_BD_USR2_OFFSET 0x28 /* User IP specific word2 */ 92 #define XAXIDMA_BD_USR3_OFFSET 0x2C /* User IP specific word3 */ 93 #define XAXIDMA_BD_USR4_OFFSET 0x30 /* User IP specific word4 */ 94 #define XAXIDMA_BD_ID_OFFSET 0x34 /* Sw ID */ 95 #define XAXIDMA_BD_HAS_STSCNTRL_OFFSET 0x38 /* Whether has stscntrl strm */ 96 #define XAXIDMA_BD_HAS_DRE_OFFSET 0x3C /* Whether has DRE */ 97 98 #define XAXIDMA_BD_HAS_DRE_SHIFT 8 /* Whether has DRE shift */ 99 #define XAXIDMA_BD_HAS_DRE_MASK 0xF00 /* Whether has DRE mask */ 100 #define XAXIDMA_BD_WORDLEN_MASK 0xFF /* Whether has DRE mask */ 101 102 #define XAXIDMA_BD_CTRL_LENGTH_MASK 0x007FFFFF /* Requested len */ 103 #define XAXIDMA_BD_CTRL_TXSOF_MASK 0x08000000 /* First tx packet */ 104 #define XAXIDMA_BD_CTRL_TXEOF_MASK 0x04000000 /* Last tx packet */ 105 #define XAXIDMA_BD_CTRL_ALL_MASK 0x0C000000 /* All control bits */ 106 107 #define XAXIDMA_DELAY_MASK 0xFF000000 /* Delay timeout counter */ 108 #define XAXIDMA_COALESCE_MASK 0x00FF0000 /* Coalesce counter */ 109 110 #define XAXIDMA_DELAY_SHIFT 24 111 #define XAXIDMA_COALESCE_SHIFT 16 112 113 #define XAXIDMA_IRQ_IOC_MASK 0x00001000 /* Completion intr */ 114 #define XAXIDMA_IRQ_DELAY_MASK 0x00002000 /* Delay interrupt */ 115 #define XAXIDMA_IRQ_ERROR_MASK 0x00004000 /* Error interrupt */ 116 #define XAXIDMA_IRQ_ALL_MASK 0x00007000 /* All interrupts */ 117 118 /* Default TX/RX Threshold and waitbound values for SGDMA mode */ 119 #define XAXIDMA_DFT_TX_THRESHOLD 24 120 #define XAXIDMA_DFT_TX_WAITBOUND 254 121 #define XAXIDMA_DFT_RX_THRESHOLD 24 122 #define XAXIDMA_DFT_RX_WAITBOUND 254 123 124 #define XAXIDMA_BD_CTRL_TXSOF_MASK 0x08000000 /* First tx packet */ 125 #define XAXIDMA_BD_CTRL_TXEOF_MASK 0x04000000 /* Last tx packet */ 126 #define XAXIDMA_BD_CTRL_ALL_MASK 0x0C000000 /* All control bits */ 127 128 #define XAXIDMA_BD_STS_ACTUAL_LEN_MASK 0x007FFFFF /* Actual len */ 129 #define XAXIDMA_BD_STS_COMPLETE_MASK 0x80000000 /* Completed */ 130 #define XAXIDMA_BD_STS_DEC_ERR_MASK 0x40000000 /* Decode error */ 131 #define XAXIDMA_BD_STS_SLV_ERR_MASK 0x20000000 /* Slave error */ 132 #define XAXIDMA_BD_STS_INT_ERR_MASK 0x10000000 /* Internal err */ 133 #define XAXIDMA_BD_STS_ALL_ERR_MASK 0x70000000 /* All errors */ 134 #define XAXIDMA_BD_STS_RXSOF_MASK 0x08000000 /* First rx pkt */ 135 #define XAXIDMA_BD_STS_RXEOF_MASK 0x04000000 /* Last rx pkt */ 136 #define XAXIDMA_BD_STS_ALL_MASK 0xFC000000 /* All status bits */ 137 138 #define XAXIDMA_BD_MINIMUM_ALIGNMENT 0x40 139 140 /* Axi Ethernet registers definition */ 141 #define XAE_RAF_OFFSET 0x00000000 /* Reset and Address filter */ 142 #define XAE_TPF_OFFSET 0x00000004 /* Tx Pause Frame */ 143 #define XAE_IFGP_OFFSET 0x00000008 /* Tx Inter-frame gap adjustment*/ 144 #define XAE_IS_OFFSET 0x0000000C /* Interrupt status */ 145 #define XAE_IP_OFFSET 0x00000010 /* Interrupt pending */ 146 #define XAE_IE_OFFSET 0x00000014 /* Interrupt enable */ 147 #define XAE_TTAG_OFFSET 0x00000018 /* Tx VLAN TAG */ 148 #define XAE_RTAG_OFFSET 0x0000001C /* Rx VLAN TAG */ 149 #define XAE_UAWL_OFFSET 0x00000020 /* Unicast address word lower */ 150 #define XAE_UAWU_OFFSET 0x00000024 /* Unicast address word upper */ 151 #define XAE_TPID0_OFFSET 0x00000028 /* VLAN TPID0 register */ 152 #define XAE_TPID1_OFFSET 0x0000002C /* VLAN TPID1 register */ 153 #define XAE_PPST_OFFSET 0x00000030 /* PCS PMA Soft Temac Status Reg */ 154 #define XAE_RCW0_OFFSET 0x00000400 /* Rx Configuration Word 0 */ 155 #define XAE_RCW1_OFFSET 0x00000404 /* Rx Configuration Word 1 */ 156 #define XAE_TC_OFFSET 0x00000408 /* Tx Configuration */ 157 #define XAE_FCC_OFFSET 0x0000040C /* Flow Control Configuration */ 158 #define XAE_EMMC_OFFSET 0x00000410 /* EMAC mode configuration */ 159 #define XAE_PHYC_OFFSET 0x00000414 /* RGMII/SGMII configuration */ 160 #define XAE_MDIO_MC_OFFSET 0x00000500 /* MII Management Config */ 161 #define XAE_MDIO_MCR_OFFSET 0x00000504 /* MII Management Control */ 162 #define XAE_MDIO_MWD_OFFSET 0x00000508 /* MII Management Write Data */ 163 #define XAE_MDIO_MRD_OFFSET 0x0000050C /* MII Management Read Data */ 164 #define XAE_MDIO_MIS_OFFSET 0x00000600 /* MII Management Interrupt Status */ 165 /* MII Mgmt Interrupt Pending register offset */ 166 #define XAE_MDIO_MIP_OFFSET 0x00000620 167 /* MII Management Interrupt Enable register offset */ 168 #define XAE_MDIO_MIE_OFFSET 0x00000640 169 /* MII Management Interrupt Clear register offset. */ 170 #define XAE_MDIO_MIC_OFFSET 0x00000660 171 #define XAE_UAW0_OFFSET 0x00000700 /* Unicast address word 0 */ 172 #define XAE_UAW1_OFFSET 0x00000704 /* Unicast address word 1 */ 173 #define XAE_FMI_OFFSET 0x00000708 /* Filter Mask Index */ 174 #define XAE_AF0_OFFSET 0x00000710 /* Address Filter 0 */ 175 #define XAE_AF1_OFFSET 0x00000714 /* Address Filter 1 */ 176 177 #define XAE_TX_VLAN_DATA_OFFSET 0x00004000 /* TX VLAN data table address */ 178 #define XAE_RX_VLAN_DATA_OFFSET 0x00008000 /* RX VLAN data table address */ 179 #define XAE_MCAST_TABLE_OFFSET 0x00020000 /* Multicast table address */ 180 181 /* Bit Masks for Axi Ethernet RAF register */ 182 /* Reject receive multicast destination address */ 183 #define XAE_RAF_MCSTREJ_MASK 0x00000002 184 /* Reject receive broadcast destination address */ 185 #define XAE_RAF_BCSTREJ_MASK 0x00000004 186 #define XAE_RAF_TXVTAGMODE_MASK 0x00000018 /* Tx VLAN TAG mode */ 187 #define XAE_RAF_RXVTAGMODE_MASK 0x00000060 /* Rx VLAN TAG mode */ 188 #define XAE_RAF_TXVSTRPMODE_MASK 0x00000180 /* Tx VLAN STRIP mode */ 189 #define XAE_RAF_RXVSTRPMODE_MASK 0x00000600 /* Rx VLAN STRIP mode */ 190 #define XAE_RAF_NEWFNCENBL_MASK 0x00000800 /* New function mode */ 191 /* Exteneded Multicast Filtering mode */ 192 #define XAE_RAF_EMULTIFLTRENBL_MASK 0x00001000 193 #define XAE_RAF_STATSRST_MASK 0x00002000 /* Stats. Counter Reset */ 194 #define XAE_RAF_RXBADFRMEN_MASK 0x00004000 /* Recv Bad Frame Enable */ 195 #define XAE_RAF_TXVTAGMODE_SHIFT 3 /* Tx Tag mode shift bits */ 196 #define XAE_RAF_RXVTAGMODE_SHIFT 5 /* Rx Tag mode shift bits */ 197 #define XAE_RAF_TXVSTRPMODE_SHIFT 7 /* Tx strip mode shift bits*/ 198 #define XAE_RAF_RXVSTRPMODE_SHIFT 9 /* Rx Strip mode shift bits*/ 199 200 /* Bit Masks for Axi Ethernet TPF and IFGP registers */ 201 #define XAE_TPF_TPFV_MASK 0x0000FFFF /* Tx pause frame value */ 202 /* Transmit inter-frame gap adjustment value */ 203 #define XAE_IFGP0_IFGP_MASK 0x0000007F 204 205 /* Bit Masks for Axi Ethernet IS, IE and IP registers, Same masks apply 206 * for all 3 registers. 207 */ 208 /* Hard register access complete */ 209 #define XAE_INT_HARDACSCMPLT_MASK 0x00000001 210 /* Auto negotiation complete */ 211 #define XAE_INT_AUTONEG_MASK 0x00000002 212 #define XAE_INT_RXCMPIT_MASK 0x00000004 /* Rx complete */ 213 #define XAE_INT_RXRJECT_MASK 0x00000008 /* Rx frame rejected */ 214 #define XAE_INT_RXFIFOOVR_MASK 0x00000010 /* Rx fifo overrun */ 215 #define XAE_INT_TXCMPIT_MASK 0x00000020 /* Tx complete */ 216 #define XAE_INT_RXDCMLOCK_MASK 0x00000040 /* Rx Dcm Lock */ 217 #define XAE_INT_MGTRDY_MASK 0x00000080 /* MGT clock Lock */ 218 #define XAE_INT_PHYRSTCMPLT_MASK 0x00000100 /* Phy Reset complete */ 219 #define XAE_INT_ALL_MASK 0x0000003F /* All the ints */ 220 221 /* INT bits that indicate receive errors */ 222 #define XAE_INT_RECV_ERROR_MASK \ 223 (XAE_INT_RXRJECT_MASK | XAE_INT_RXFIFOOVR_MASK) 224 225 /* Bit masks for Axi Ethernet VLAN TPID Word 0 register */ 226 #define XAE_TPID_0_MASK 0x0000FFFF /* TPID 0 */ 227 #define XAE_TPID_1_MASK 0xFFFF0000 /* TPID 1 */ 228 229 /* Bit masks for Axi Ethernet VLAN TPID Word 1 register */ 230 #define XAE_TPID_2_MASK 0x0000FFFF /* TPID 0 */ 231 #define XAE_TPID_3_MASK 0xFFFF0000 /* TPID 1 */ 232 233 /* Bit masks for Axi Ethernet RCW1 register */ 234 #define XAE_RCW1_RST_MASK 0x80000000 /* Reset */ 235 #define XAE_RCW1_JUM_MASK 0x40000000 /* Jumbo frame enable */ 236 /* In-Band FCS enable (FCS not stripped) */ 237 #define XAE_RCW1_FCS_MASK 0x20000000 238 #define XAE_RCW1_RX_MASK 0x10000000 /* Receiver enable */ 239 #define XAE_RCW1_VLAN_MASK 0x08000000 /* VLAN frame enable */ 240 /* Length/type field valid check disable */ 241 #define XAE_RCW1_LT_DIS_MASK 0x02000000 242 /* Control frame Length check disable */ 243 #define XAE_RCW1_CL_DIS_MASK 0x01000000 244 /* Pause frame source address bits [47:32]. Bits [31:0] are 245 * stored in register RCW0 246 */ 247 #define XAE_RCW1_PAUSEADDR_MASK 0x0000FFFF 248 249 /* Bit masks for Axi Ethernet TC register */ 250 #define XAE_TC_RST_MASK 0x80000000 /* Reset */ 251 #define XAE_TC_JUM_MASK 0x40000000 /* Jumbo frame enable */ 252 /* In-Band FCS enable (FCS not generated) */ 253 #define XAE_TC_FCS_MASK 0x20000000 254 #define XAE_TC_TX_MASK 0x10000000 /* Transmitter enable */ 255 #define XAE_TC_VLAN_MASK 0x08000000 /* VLAN frame enable */ 256 /* Inter-frame gap adjustment enable */ 257 #define XAE_TC_IFG_MASK 0x02000000 258 259 /* Bit masks for Axi Ethernet FCC register */ 260 #define XAE_FCC_FCRX_MASK 0x20000000 /* Rx flow control enable */ 261 #define XAE_FCC_FCTX_MASK 0x40000000 /* Tx flow control enable */ 262 263 /* Bit masks for Axi Ethernet EMMC register */ 264 #define XAE_EMMC_LINKSPEED_MASK 0xC0000000 /* Link speed */ 265 #define XAE_EMMC_RGMII_MASK 0x20000000 /* RGMII mode enable */ 266 #define XAE_EMMC_SGMII_MASK 0x10000000 /* SGMII mode enable */ 267 #define XAE_EMMC_GPCS_MASK 0x08000000 /* 1000BaseX mode enable */ 268 #define XAE_EMMC_HOST_MASK 0x04000000 /* Host interface enable */ 269 #define XAE_EMMC_TX16BIT 0x02000000 /* 16 bit Tx client enable */ 270 #define XAE_EMMC_RX16BIT 0x01000000 /* 16 bit Rx client enable */ 271 #define XAE_EMMC_LINKSPD_10 0x00000000 /* Link Speed mask for 10 Mbit */ 272 #define XAE_EMMC_LINKSPD_100 0x40000000 /* Link Speed mask for 100 Mbit */ 273 #define XAE_EMMC_LINKSPD_1000 0x80000000 /* Link Speed mask for 1000 Mbit */ 274 275 /* Bit masks for Axi Ethernet PHYC register */ 276 #define XAE_PHYC_SGMIILINKSPEED_MASK 0xC0000000 /* SGMII link speed mask*/ 277 #define XAE_PHYC_RGMIILINKSPEED_MASK 0x0000000C /* RGMII link speed */ 278 #define XAE_PHYC_RGMIIHD_MASK 0x00000002 /* RGMII Half-duplex */ 279 #define XAE_PHYC_RGMIILINK_MASK 0x00000001 /* RGMII link status */ 280 #define XAE_PHYC_RGLINKSPD_10 0x00000000 /* RGMII link 10 Mbit */ 281 #define XAE_PHYC_RGLINKSPD_100 0x00000004 /* RGMII link 100 Mbit */ 282 #define XAE_PHYC_RGLINKSPD_1000 0x00000008 /* RGMII link 1000 Mbit */ 283 #define XAE_PHYC_SGLINKSPD_10 0x00000000 /* SGMII link 10 Mbit */ 284 #define XAE_PHYC_SGLINKSPD_100 0x40000000 /* SGMII link 100 Mbit */ 285 #define XAE_PHYC_SGLINKSPD_1000 0x80000000 /* SGMII link 1000 Mbit */ 286 287 /* Bit masks for Axi Ethernet MDIO interface MC register */ 288 #define XAE_MDIO_MC_MDIOEN_MASK 0x00000040 /* MII management enable */ 289 #define XAE_MDIO_MC_CLOCK_DIVIDE_MAX 0x3F /* Maximum MDIO divisor */ 290 291 /* Bit masks for Axi Ethernet MDIO interface MCR register */ 292 #define XAE_MDIO_MCR_PHYAD_MASK 0x1F000000 /* Phy Address Mask */ 293 #define XAE_MDIO_MCR_PHYAD_SHIFT 24 /* Phy Address Shift */ 294 #define XAE_MDIO_MCR_REGAD_MASK 0x001F0000 /* Reg Address Mask */ 295 #define XAE_MDIO_MCR_REGAD_SHIFT 16 /* Reg Address Shift */ 296 #define XAE_MDIO_MCR_OP_MASK 0x0000C000 /* Operation Code Mask */ 297 #define XAE_MDIO_MCR_OP_SHIFT 13 /* Operation Code Shift */ 298 #define XAE_MDIO_MCR_OP_READ_MASK 0x00008000 /* Op Code Read Mask */ 299 #define XAE_MDIO_MCR_OP_WRITE_MASK 0x00004000 /* Op Code Write Mask */ 300 #define XAE_MDIO_MCR_INITIATE_MASK 0x00000800 /* Ready Mask */ 301 #define XAE_MDIO_MCR_READY_MASK 0x00000080 /* Ready Mask */ 302 303 /* Bit masks for Axi Ethernet MDIO interface MIS, MIP, MIE, MIC registers */ 304 #define XAE_MDIO_INT_MIIM_RDY_MASK 0x00000001 /* MIIM Interrupt */ 305 306 /* Bit masks for Axi Ethernet UAW1 register */ 307 /* Station address bits [47:32]; Station address 308 * bits [31:0] are stored in register UAW0 309 */ 310 #define XAE_UAW1_UNICASTADDR_MASK 0x0000FFFF 311 312 /* Bit masks for Axi Ethernet FMI register */ 313 #define XAE_FMI_PM_MASK 0x80000000 /* Promis. mode enable */ 314 #define XAE_FMI_IND_MASK 0x00000003 /* Index Mask */ 315 316 #define XAE_MDIO_DIV_DFT 29 /* Default MDIO clock divisor */ 317 318 /* Defines for different options for C_PHY_TYPE parameter in Axi Ethernet IP */ 319 #define XAE_PHY_TYPE_MII 0 320 #define XAE_PHY_TYPE_GMII 1 321 #define XAE_PHY_TYPE_RGMII_1_3 2 322 #define XAE_PHY_TYPE_RGMII_2_0 3 323 #define XAE_PHY_TYPE_SGMII 4 324 #define XAE_PHY_TYPE_1000BASE_X 5 325 326 /* Total number of entries in the hardware multicast table. */ 327 #define XAE_MULTICAST_CAM_TABLE_NUM 4 328 329 /* Axi Ethernet Synthesis features */ 330 #define XAE_FEATURE_PARTIAL_RX_CSUM (1 << 0) 331 #define XAE_FEATURE_PARTIAL_TX_CSUM (1 << 1) 332 #define XAE_FEATURE_FULL_RX_CSUM (1 << 2) 333 #define XAE_FEATURE_FULL_TX_CSUM (1 << 3) 334 335 #define XAE_NO_CSUM_OFFLOAD 0 336 337 #define XAE_FULL_CSUM_STATUS_MASK 0x00000038 338 #define XAE_IP_UDP_CSUM_VALIDATED 0x00000003 339 #define XAE_IP_TCP_CSUM_VALIDATED 0x00000002 340 341 #define DELAY_OF_ONE_MILLISEC 1000 342 343 /** 344 * struct axidma_bd - Axi Dma buffer descriptor layout 345 * @next: MM2S/S2MM Next Descriptor Pointer 346 * @reserved1: Reserved and not used 347 * @phys: MM2S/S2MM Buffer Address 348 * @reserved2: Reserved and not used 349 * @reserved3: Reserved and not used 350 * @reserved4: Reserved and not used 351 * @cntrl: MM2S/S2MM Control value 352 * @status: MM2S/S2MM Status value 353 * @app0: MM2S/S2MM User Application Field 0. 354 * @app1: MM2S/S2MM User Application Field 1. 355 * @app2: MM2S/S2MM User Application Field 2. 356 * @app3: MM2S/S2MM User Application Field 3. 357 * @app4: MM2S/S2MM User Application Field 4. 358 * @sw_id_offset: MM2S/S2MM Sw ID 359 * @reserved5: Reserved and not used 360 * @reserved6: Reserved and not used 361 */ 362 struct axidma_bd { 363 u32 next; /* Physical address of next buffer descriptor */ 364 u32 reserved1; 365 u32 phys; 366 u32 reserved2; 367 u32 reserved3; 368 u32 reserved4; 369 u32 cntrl; 370 u32 status; 371 u32 app0; 372 u32 app1; /* TX start << 16 | insert */ 373 u32 app2; /* TX csum seed */ 374 u32 app3; 375 u32 app4; 376 u32 sw_id_offset; 377 u32 reserved5; 378 u32 reserved6; 379 }; 380 381 /** 382 * struct axienet_local - axienet private per device data 383 * @ndev: Pointer for net_device to which it will be attached. 384 * @dev: Pointer to device structure 385 * @phy_node: Pointer to device node structure 386 * @mii_bus: Pointer to MII bus structure 387 * @regs: Base address for the axienet_local device address space 388 * @dma_regs: Base address for the axidma device address space 389 * @dma_err_tasklet: Tasklet structure to process Axi DMA errors 390 * @tx_irq: Axidma TX IRQ number 391 * @rx_irq: Axidma RX IRQ number 392 * @phy_type: Phy type to identify between MII/GMII/RGMII/SGMII/1000 Base-X 393 * @options: AxiEthernet option word 394 * @last_link: Phy link state in which the PHY was negotiated earlier 395 * @features: Stores the extended features supported by the axienet hw 396 * @tx_bd_v: Virtual address of the TX buffer descriptor ring 397 * @tx_bd_p: Physical address(start address) of the TX buffer descr. ring 398 * @rx_bd_v: Virtual address of the RX buffer descriptor ring 399 * @rx_bd_p: Physical address(start address) of the RX buffer descr. ring 400 * @tx_bd_ci: Stores the index of the Tx buffer descriptor in the ring being 401 * accessed currently. Used while alloc. BDs before a TX starts 402 * @tx_bd_tail: Stores the index of the Tx buffer descriptor in the ring being 403 * accessed currently. Used while processing BDs after the TX 404 * completed. 405 * @rx_bd_ci: Stores the index of the Rx buffer descriptor in the ring being 406 * accessed currently. 407 * @max_frm_size: Stores the maximum size of the frame that can be that 408 * Txed/Rxed in the existing hardware. If jumbo option is 409 * supported, the maximum frame size would be 9k. Else it is 410 * 1522 bytes (assuming support for basic VLAN) 411 * @rxmem: Stores rx memory size for jumbo frame handling. 412 * @csum_offload_on_tx_path: Stores the checksum selection on TX side. 413 * @csum_offload_on_rx_path: Stores the checksum selection on RX side. 414 * @coalesce_count_rx: Store the irq coalesce on RX side. 415 * @coalesce_count_tx: Store the irq coalesce on TX side. 416 */ 417 struct axienet_local { 418 struct net_device *ndev; 419 struct device *dev; 420 421 /* Connection to PHY device */ 422 struct device_node *phy_node; 423 424 /* MDIO bus data */ 425 struct mii_bus *mii_bus; /* MII bus reference */ 426 427 /* IO registers, dma functions and IRQs */ 428 void __iomem *regs; 429 void __iomem *dma_regs; 430 431 struct tasklet_struct dma_err_tasklet; 432 433 int tx_irq; 434 int rx_irq; 435 u32 phy_type; 436 437 u32 options; /* Current options word */ 438 u32 last_link; 439 u32 features; 440 441 /* Buffer descriptors */ 442 struct axidma_bd *tx_bd_v; 443 dma_addr_t tx_bd_p; 444 struct axidma_bd *rx_bd_v; 445 dma_addr_t rx_bd_p; 446 u32 tx_bd_ci; 447 u32 tx_bd_tail; 448 u32 rx_bd_ci; 449 450 u32 max_frm_size; 451 u32 rxmem; 452 453 int csum_offload_on_tx_path; 454 int csum_offload_on_rx_path; 455 456 u32 coalesce_count_rx; 457 u32 coalesce_count_tx; 458 }; 459 460 /** 461 * struct axiethernet_option - Used to set axi ethernet hardware options 462 * @opt: Option to be set. 463 * @reg: Register offset to be written for setting the option 464 * @m_or: Mask to be ORed for setting the option in the register 465 */ 466 struct axienet_option { 467 u32 opt; 468 u32 reg; 469 u32 m_or; 470 }; 471 472 /** 473 * axienet_ior - Memory mapped Axi Ethernet register read 474 * @lp: Pointer to axienet local structure 475 * @offset: Address offset from the base address of Axi Ethernet core 476 * 477 * Return: The contents of the Axi Ethernet register 478 * 479 * This function returns the contents of the corresponding register. 480 */ 481 static inline u32 axienet_ior(struct axienet_local *lp, off_t offset) 482 { 483 return in_be32(lp->regs + offset); 484 } 485 486 /** 487 * axienet_iow - Memory mapped Axi Ethernet register write 488 * @lp: Pointer to axienet local structure 489 * @offset: Address offset from the base address of Axi Ethernet core 490 * @value: Value to be written into the Axi Ethernet register 491 * 492 * This function writes the desired value into the corresponding Axi Ethernet 493 * register. 494 */ 495 static inline void axienet_iow(struct axienet_local *lp, off_t offset, 496 u32 value) 497 { 498 out_be32((lp->regs + offset), value); 499 } 500 501 /* Function prototypes visible in xilinx_axienet_mdio.c for other files */ 502 int axienet_mdio_setup(struct axienet_local *lp, struct device_node *np); 503 int axienet_mdio_wait_until_ready(struct axienet_local *lp); 504 void axienet_mdio_teardown(struct axienet_local *lp); 505 506 #endif /* XILINX_AXI_ENET_H */ 507