xref: /linux/drivers/net/ethernet/xilinx/xilinx_axienet.h (revision 0d3b051adbb72ed81956447d0d1e54d5943ee6f5)
1 /* SPDX-License-Identifier: GPL-2.0 */
2 /*
3  * Definitions for Xilinx Axi Ethernet device driver.
4  *
5  * Copyright (c) 2009 Secret Lab Technologies, Ltd.
6  * Copyright (c) 2010 - 2012 Xilinx, Inc. All rights reserved.
7  */
8 
9 #ifndef XILINX_AXIENET_H
10 #define XILINX_AXIENET_H
11 
12 #include <linux/netdevice.h>
13 #include <linux/spinlock.h>
14 #include <linux/interrupt.h>
15 #include <linux/if_vlan.h>
16 #include <linux/phylink.h>
17 
18 /* Packet size info */
19 #define XAE_HDR_SIZE			14 /* Size of Ethernet header */
20 #define XAE_TRL_SIZE			 4 /* Size of Ethernet trailer (FCS) */
21 #define XAE_MTU			      1500 /* Max MTU of an Ethernet frame */
22 #define XAE_JUMBO_MTU		      9000 /* Max MTU of a jumbo Eth. frame */
23 
24 #define XAE_MAX_FRAME_SIZE	 (XAE_MTU + XAE_HDR_SIZE + XAE_TRL_SIZE)
25 #define XAE_MAX_VLAN_FRAME_SIZE  (XAE_MTU + VLAN_ETH_HLEN + XAE_TRL_SIZE)
26 #define XAE_MAX_JUMBO_FRAME_SIZE (XAE_JUMBO_MTU + XAE_HDR_SIZE + XAE_TRL_SIZE)
27 
28 /* Configuration options */
29 
30 /* Accept all incoming packets. Default: disabled (cleared) */
31 #define XAE_OPTION_PROMISC			(1 << 0)
32 
33 /* Jumbo frame support for Tx & Rx. Default: disabled (cleared) */
34 #define XAE_OPTION_JUMBO			(1 << 1)
35 
36 /* VLAN Rx & Tx frame support. Default: disabled (cleared) */
37 #define XAE_OPTION_VLAN				(1 << 2)
38 
39 /* Enable recognition of flow control frames on Rx. Default: enabled (set) */
40 #define XAE_OPTION_FLOW_CONTROL			(1 << 4)
41 
42 /* Strip FCS and PAD from incoming frames. Note: PAD from VLAN frames is not
43  * stripped. Default: disabled (set)
44  */
45 #define XAE_OPTION_FCS_STRIP			(1 << 5)
46 
47 /* Generate FCS field and add PAD automatically for outgoing frames.
48  * Default: enabled (set)
49  */
50 #define XAE_OPTION_FCS_INSERT			(1 << 6)
51 
52 /* Enable Length/Type error checking for incoming frames. When this option is
53  * set, the MAC will filter frames that have a mismatched type/length field
54  * and if XAE_OPTION_REPORT_RXERR is set, the user is notified when these
55  * types of frames are encountered. When this option is cleared, the MAC will
56  * allow these types of frames to be received. Default: enabled (set)
57  */
58 #define XAE_OPTION_LENTYPE_ERR			(1 << 7)
59 
60 /* Enable the transmitter. Default: enabled (set) */
61 #define XAE_OPTION_TXEN				(1 << 11)
62 
63 /*  Enable the receiver. Default: enabled (set) */
64 #define XAE_OPTION_RXEN				(1 << 12)
65 
66 /*  Default options set when device is initialized or reset */
67 #define XAE_OPTION_DEFAULTS				   \
68 				(XAE_OPTION_TXEN |	   \
69 				 XAE_OPTION_FLOW_CONTROL | \
70 				 XAE_OPTION_RXEN)
71 
72 /* Axi DMA Register definitions */
73 
74 #define XAXIDMA_TX_CR_OFFSET	0x00000000 /* Channel control */
75 #define XAXIDMA_TX_SR_OFFSET	0x00000004 /* Status */
76 #define XAXIDMA_TX_CDESC_OFFSET	0x00000008 /* Current descriptor pointer */
77 #define XAXIDMA_TX_TDESC_OFFSET	0x00000010 /* Tail descriptor pointer */
78 
79 #define XAXIDMA_RX_CR_OFFSET	0x00000030 /* Channel control */
80 #define XAXIDMA_RX_SR_OFFSET	0x00000034 /* Status */
81 #define XAXIDMA_RX_CDESC_OFFSET	0x00000038 /* Current descriptor pointer */
82 #define XAXIDMA_RX_TDESC_OFFSET	0x00000040 /* Tail descriptor pointer */
83 
84 #define XAXIDMA_CR_RUNSTOP_MASK	0x00000001 /* Start/stop DMA channel */
85 #define XAXIDMA_CR_RESET_MASK	0x00000004 /* Reset DMA engine */
86 
87 #define XAXIDMA_SR_HALT_MASK	0x00000001 /* Indicates DMA channel halted */
88 
89 #define XAXIDMA_BD_NDESC_OFFSET		0x00 /* Next descriptor pointer */
90 #define XAXIDMA_BD_BUFA_OFFSET		0x08 /* Buffer address */
91 #define XAXIDMA_BD_CTRL_LEN_OFFSET	0x18 /* Control/buffer length */
92 #define XAXIDMA_BD_STS_OFFSET		0x1C /* Status */
93 #define XAXIDMA_BD_USR0_OFFSET		0x20 /* User IP specific word0 */
94 #define XAXIDMA_BD_USR1_OFFSET		0x24 /* User IP specific word1 */
95 #define XAXIDMA_BD_USR2_OFFSET		0x28 /* User IP specific word2 */
96 #define XAXIDMA_BD_USR3_OFFSET		0x2C /* User IP specific word3 */
97 #define XAXIDMA_BD_USR4_OFFSET		0x30 /* User IP specific word4 */
98 #define XAXIDMA_BD_ID_OFFSET		0x34 /* Sw ID */
99 #define XAXIDMA_BD_HAS_STSCNTRL_OFFSET	0x38 /* Whether has stscntrl strm */
100 #define XAXIDMA_BD_HAS_DRE_OFFSET	0x3C /* Whether has DRE */
101 
102 #define XAXIDMA_BD_HAS_DRE_SHIFT	8 /* Whether has DRE shift */
103 #define XAXIDMA_BD_HAS_DRE_MASK		0xF00 /* Whether has DRE mask */
104 #define XAXIDMA_BD_WORDLEN_MASK		0xFF /* Whether has DRE mask */
105 
106 #define XAXIDMA_BD_CTRL_LENGTH_MASK	0x007FFFFF /* Requested len */
107 #define XAXIDMA_BD_CTRL_TXSOF_MASK	0x08000000 /* First tx packet */
108 #define XAXIDMA_BD_CTRL_TXEOF_MASK	0x04000000 /* Last tx packet */
109 #define XAXIDMA_BD_CTRL_ALL_MASK	0x0C000000 /* All control bits */
110 
111 #define XAXIDMA_DELAY_MASK		0xFF000000 /* Delay timeout counter */
112 #define XAXIDMA_COALESCE_MASK		0x00FF0000 /* Coalesce counter */
113 
114 #define XAXIDMA_DELAY_SHIFT		24
115 #define XAXIDMA_COALESCE_SHIFT		16
116 
117 #define XAXIDMA_IRQ_IOC_MASK		0x00001000 /* Completion intr */
118 #define XAXIDMA_IRQ_DELAY_MASK		0x00002000 /* Delay interrupt */
119 #define XAXIDMA_IRQ_ERROR_MASK		0x00004000 /* Error interrupt */
120 #define XAXIDMA_IRQ_ALL_MASK		0x00007000 /* All interrupts */
121 
122 /* Default TX/RX Threshold and waitbound values for SGDMA mode */
123 #define XAXIDMA_DFT_TX_THRESHOLD	24
124 #define XAXIDMA_DFT_TX_WAITBOUND	254
125 #define XAXIDMA_DFT_RX_THRESHOLD	24
126 #define XAXIDMA_DFT_RX_WAITBOUND	254
127 
128 #define XAXIDMA_BD_CTRL_TXSOF_MASK	0x08000000 /* First tx packet */
129 #define XAXIDMA_BD_CTRL_TXEOF_MASK	0x04000000 /* Last tx packet */
130 #define XAXIDMA_BD_CTRL_ALL_MASK	0x0C000000 /* All control bits */
131 
132 #define XAXIDMA_BD_STS_ACTUAL_LEN_MASK	0x007FFFFF /* Actual len */
133 #define XAXIDMA_BD_STS_COMPLETE_MASK	0x80000000 /* Completed */
134 #define XAXIDMA_BD_STS_DEC_ERR_MASK	0x40000000 /* Decode error */
135 #define XAXIDMA_BD_STS_SLV_ERR_MASK	0x20000000 /* Slave error */
136 #define XAXIDMA_BD_STS_INT_ERR_MASK	0x10000000 /* Internal err */
137 #define XAXIDMA_BD_STS_ALL_ERR_MASK	0x70000000 /* All errors */
138 #define XAXIDMA_BD_STS_RXSOF_MASK	0x08000000 /* First rx pkt */
139 #define XAXIDMA_BD_STS_RXEOF_MASK	0x04000000 /* Last rx pkt */
140 #define XAXIDMA_BD_STS_ALL_MASK		0xFC000000 /* All status bits */
141 
142 #define XAXIDMA_BD_MINIMUM_ALIGNMENT	0x40
143 
144 /* Axi Ethernet registers definition */
145 #define XAE_RAF_OFFSET		0x00000000 /* Reset and Address filter */
146 #define XAE_TPF_OFFSET		0x00000004 /* Tx Pause Frame */
147 #define XAE_IFGP_OFFSET		0x00000008 /* Tx Inter-frame gap adjustment*/
148 #define XAE_IS_OFFSET		0x0000000C /* Interrupt status */
149 #define XAE_IP_OFFSET		0x00000010 /* Interrupt pending */
150 #define XAE_IE_OFFSET		0x00000014 /* Interrupt enable */
151 #define XAE_TTAG_OFFSET		0x00000018 /* Tx VLAN TAG */
152 #define XAE_RTAG_OFFSET		0x0000001C /* Rx VLAN TAG */
153 #define XAE_UAWL_OFFSET		0x00000020 /* Unicast address word lower */
154 #define XAE_UAWU_OFFSET		0x00000024 /* Unicast address word upper */
155 #define XAE_TPID0_OFFSET	0x00000028 /* VLAN TPID0 register */
156 #define XAE_TPID1_OFFSET	0x0000002C /* VLAN TPID1 register */
157 #define XAE_PPST_OFFSET		0x00000030 /* PCS PMA Soft Temac Status Reg */
158 #define XAE_RCW0_OFFSET		0x00000400 /* Rx Configuration Word 0 */
159 #define XAE_RCW1_OFFSET		0x00000404 /* Rx Configuration Word 1 */
160 #define XAE_TC_OFFSET		0x00000408 /* Tx Configuration */
161 #define XAE_FCC_OFFSET		0x0000040C /* Flow Control Configuration */
162 #define XAE_EMMC_OFFSET		0x00000410 /* EMAC mode configuration */
163 #define XAE_PHYC_OFFSET		0x00000414 /* RGMII/SGMII configuration */
164 #define XAE_ID_OFFSET		0x000004F8 /* Identification register */
165 #define XAE_MDIO_MC_OFFSET	0x00000500 /* MII Management Config */
166 #define XAE_MDIO_MCR_OFFSET	0x00000504 /* MII Management Control */
167 #define XAE_MDIO_MWD_OFFSET	0x00000508 /* MII Management Write Data */
168 #define XAE_MDIO_MRD_OFFSET	0x0000050C /* MII Management Read Data */
169 #define XAE_UAW0_OFFSET		0x00000700 /* Unicast address word 0 */
170 #define XAE_UAW1_OFFSET		0x00000704 /* Unicast address word 1 */
171 #define XAE_FMI_OFFSET		0x00000708 /* Filter Mask Index */
172 #define XAE_AF0_OFFSET		0x00000710 /* Address Filter 0 */
173 #define XAE_AF1_OFFSET		0x00000714 /* Address Filter 1 */
174 
175 #define XAE_TX_VLAN_DATA_OFFSET 0x00004000 /* TX VLAN data table address */
176 #define XAE_RX_VLAN_DATA_OFFSET 0x00008000 /* RX VLAN data table address */
177 #define XAE_MCAST_TABLE_OFFSET	0x00020000 /* Multicast table address */
178 
179 /* Bit Masks for Axi Ethernet RAF register */
180 /* Reject receive multicast destination address */
181 #define XAE_RAF_MCSTREJ_MASK		0x00000002
182 /* Reject receive broadcast destination address */
183 #define XAE_RAF_BCSTREJ_MASK		0x00000004
184 #define XAE_RAF_TXVTAGMODE_MASK		0x00000018 /* Tx VLAN TAG mode */
185 #define XAE_RAF_RXVTAGMODE_MASK		0x00000060 /* Rx VLAN TAG mode */
186 #define XAE_RAF_TXVSTRPMODE_MASK	0x00000180 /* Tx VLAN STRIP mode */
187 #define XAE_RAF_RXVSTRPMODE_MASK	0x00000600 /* Rx VLAN STRIP mode */
188 #define XAE_RAF_NEWFNCENBL_MASK		0x00000800 /* New function mode */
189 /* Extended Multicast Filtering mode */
190 #define XAE_RAF_EMULTIFLTRENBL_MASK	0x00001000
191 #define XAE_RAF_STATSRST_MASK		0x00002000 /* Stats. Counter Reset */
192 #define XAE_RAF_RXBADFRMEN_MASK		0x00004000 /* Recv Bad Frame Enable */
193 #define XAE_RAF_TXVTAGMODE_SHIFT	3 /* Tx Tag mode shift bits */
194 #define XAE_RAF_RXVTAGMODE_SHIFT	5 /* Rx Tag mode shift bits */
195 #define XAE_RAF_TXVSTRPMODE_SHIFT	7 /* Tx strip mode shift bits*/
196 #define XAE_RAF_RXVSTRPMODE_SHIFT	9 /* Rx Strip mode shift bits*/
197 
198 /* Bit Masks for Axi Ethernet TPF and IFGP registers */
199 #define XAE_TPF_TPFV_MASK		0x0000FFFF /* Tx pause frame value */
200 /* Transmit inter-frame gap adjustment value */
201 #define XAE_IFGP0_IFGP_MASK		0x0000007F
202 
203 /* Bit Masks for Axi Ethernet IS, IE and IP registers, Same masks apply
204  * for all 3 registers.
205  */
206 /* Hard register access complete */
207 #define XAE_INT_HARDACSCMPLT_MASK	0x00000001
208 /* Auto negotiation complete */
209 #define XAE_INT_AUTONEG_MASK		0x00000002
210 #define XAE_INT_RXCMPIT_MASK		0x00000004 /* Rx complete */
211 #define XAE_INT_RXRJECT_MASK		0x00000008 /* Rx frame rejected */
212 #define XAE_INT_RXFIFOOVR_MASK		0x00000010 /* Rx fifo overrun */
213 #define XAE_INT_TXCMPIT_MASK		0x00000020 /* Tx complete */
214 #define XAE_INT_RXDCMLOCK_MASK		0x00000040 /* Rx Dcm Lock */
215 #define XAE_INT_MGTRDY_MASK		0x00000080 /* MGT clock Lock */
216 #define XAE_INT_PHYRSTCMPLT_MASK	0x00000100 /* Phy Reset complete */
217 #define XAE_INT_ALL_MASK		0x0000003F /* All the ints */
218 
219 /* INT bits that indicate receive errors */
220 #define XAE_INT_RECV_ERROR_MASK				\
221 	(XAE_INT_RXRJECT_MASK | XAE_INT_RXFIFOOVR_MASK)
222 
223 /* Bit masks for Axi Ethernet VLAN TPID Word 0 register */
224 #define XAE_TPID_0_MASK		0x0000FFFF /* TPID 0 */
225 #define XAE_TPID_1_MASK		0xFFFF0000 /* TPID 1 */
226 
227 /* Bit masks for Axi Ethernet VLAN TPID Word 1 register */
228 #define XAE_TPID_2_MASK		0x0000FFFF /* TPID 0 */
229 #define XAE_TPID_3_MASK		0xFFFF0000 /* TPID 1 */
230 
231 /* Bit masks for Axi Ethernet RCW1 register */
232 #define XAE_RCW1_RST_MASK	0x80000000 /* Reset */
233 #define XAE_RCW1_JUM_MASK	0x40000000 /* Jumbo frame enable */
234 /* In-Band FCS enable (FCS not stripped) */
235 #define XAE_RCW1_FCS_MASK	0x20000000
236 #define XAE_RCW1_RX_MASK	0x10000000 /* Receiver enable */
237 #define XAE_RCW1_VLAN_MASK	0x08000000 /* VLAN frame enable */
238 /* Length/type field valid check disable */
239 #define XAE_RCW1_LT_DIS_MASK	0x02000000
240 /* Control frame Length check disable */
241 #define XAE_RCW1_CL_DIS_MASK	0x01000000
242 /* Pause frame source address bits [47:32]. Bits [31:0] are
243  * stored in register RCW0
244  */
245 #define XAE_RCW1_PAUSEADDR_MASK 0x0000FFFF
246 
247 /* Bit masks for Axi Ethernet TC register */
248 #define XAE_TC_RST_MASK		0x80000000 /* Reset */
249 #define XAE_TC_JUM_MASK		0x40000000 /* Jumbo frame enable */
250 /* In-Band FCS enable (FCS not generated) */
251 #define XAE_TC_FCS_MASK		0x20000000
252 #define XAE_TC_TX_MASK		0x10000000 /* Transmitter enable */
253 #define XAE_TC_VLAN_MASK	0x08000000 /* VLAN frame enable */
254 /* Inter-frame gap adjustment enable */
255 #define XAE_TC_IFG_MASK		0x02000000
256 
257 /* Bit masks for Axi Ethernet FCC register */
258 #define XAE_FCC_FCRX_MASK	0x20000000 /* Rx flow control enable */
259 #define XAE_FCC_FCTX_MASK	0x40000000 /* Tx flow control enable */
260 
261 /* Bit masks for Axi Ethernet EMMC register */
262 #define XAE_EMMC_LINKSPEED_MASK	0xC0000000 /* Link speed */
263 #define XAE_EMMC_RGMII_MASK	0x20000000 /* RGMII mode enable */
264 #define XAE_EMMC_SGMII_MASK	0x10000000 /* SGMII mode enable */
265 #define XAE_EMMC_GPCS_MASK	0x08000000 /* 1000BaseX mode enable */
266 #define XAE_EMMC_HOST_MASK	0x04000000 /* Host interface enable */
267 #define XAE_EMMC_TX16BIT	0x02000000 /* 16 bit Tx client enable */
268 #define XAE_EMMC_RX16BIT	0x01000000 /* 16 bit Rx client enable */
269 #define XAE_EMMC_LINKSPD_10	0x00000000 /* Link Speed mask for 10 Mbit */
270 #define XAE_EMMC_LINKSPD_100	0x40000000 /* Link Speed mask for 100 Mbit */
271 #define XAE_EMMC_LINKSPD_1000	0x80000000 /* Link Speed mask for 1000 Mbit */
272 
273 /* Bit masks for Axi Ethernet PHYC register */
274 #define XAE_PHYC_SGMIILINKSPEED_MASK	0xC0000000 /* SGMII link speed mask*/
275 #define XAE_PHYC_RGMIILINKSPEED_MASK	0x0000000C /* RGMII link speed */
276 #define XAE_PHYC_RGMIIHD_MASK		0x00000002 /* RGMII Half-duplex */
277 #define XAE_PHYC_RGMIILINK_MASK		0x00000001 /* RGMII link status */
278 #define XAE_PHYC_RGLINKSPD_10		0x00000000 /* RGMII link 10 Mbit */
279 #define XAE_PHYC_RGLINKSPD_100		0x00000004 /* RGMII link 100 Mbit */
280 #define XAE_PHYC_RGLINKSPD_1000		0x00000008 /* RGMII link 1000 Mbit */
281 #define XAE_PHYC_SGLINKSPD_10		0x00000000 /* SGMII link 10 Mbit */
282 #define XAE_PHYC_SGLINKSPD_100		0x40000000 /* SGMII link 100 Mbit */
283 #define XAE_PHYC_SGLINKSPD_1000		0x80000000 /* SGMII link 1000 Mbit */
284 
285 /* Bit masks for Axi Ethernet MDIO interface MC register */
286 #define XAE_MDIO_MC_MDIOEN_MASK		0x00000040 /* MII management enable */
287 #define XAE_MDIO_MC_CLOCK_DIVIDE_MAX	0x3F	   /* Maximum MDIO divisor */
288 
289 /* Bit masks for Axi Ethernet MDIO interface MCR register */
290 #define XAE_MDIO_MCR_PHYAD_MASK		0x1F000000 /* Phy Address Mask */
291 #define XAE_MDIO_MCR_PHYAD_SHIFT	24	   /* Phy Address Shift */
292 #define XAE_MDIO_MCR_REGAD_MASK		0x001F0000 /* Reg Address Mask */
293 #define XAE_MDIO_MCR_REGAD_SHIFT	16	   /* Reg Address Shift */
294 #define XAE_MDIO_MCR_OP_MASK		0x0000C000 /* Operation Code Mask */
295 #define XAE_MDIO_MCR_OP_SHIFT		13	   /* Operation Code Shift */
296 #define XAE_MDIO_MCR_OP_READ_MASK	0x00008000 /* Op Code Read Mask */
297 #define XAE_MDIO_MCR_OP_WRITE_MASK	0x00004000 /* Op Code Write Mask */
298 #define XAE_MDIO_MCR_INITIATE_MASK	0x00000800 /* Ready Mask */
299 #define XAE_MDIO_MCR_READY_MASK		0x00000080 /* Ready Mask */
300 
301 /* Bit masks for Axi Ethernet MDIO interface MIS, MIP, MIE, MIC registers */
302 #define XAE_MDIO_INT_MIIM_RDY_MASK	0x00000001 /* MIIM Interrupt */
303 
304 /* Bit masks for Axi Ethernet UAW1 register */
305 /* Station address bits [47:32]; Station address
306  * bits [31:0] are stored in register UAW0
307  */
308 #define XAE_UAW1_UNICASTADDR_MASK	0x0000FFFF
309 
310 /* Bit masks for Axi Ethernet FMI register */
311 #define XAE_FMI_PM_MASK			0x80000000 /* Promis. mode enable */
312 #define XAE_FMI_IND_MASK		0x00000003 /* Index Mask */
313 
314 #define XAE_MDIO_DIV_DFT		29 /* Default MDIO clock divisor */
315 
316 /* Defines for different options for C_PHY_TYPE parameter in Axi Ethernet IP */
317 #define XAE_PHY_TYPE_MII		0
318 #define XAE_PHY_TYPE_GMII		1
319 #define XAE_PHY_TYPE_RGMII_1_3		2
320 #define XAE_PHY_TYPE_RGMII_2_0		3
321 #define XAE_PHY_TYPE_SGMII		4
322 #define XAE_PHY_TYPE_1000BASE_X		5
323 
324  /* Total number of entries in the hardware multicast table. */
325 #define XAE_MULTICAST_CAM_TABLE_NUM	4
326 
327 /* Axi Ethernet Synthesis features */
328 #define XAE_FEATURE_PARTIAL_RX_CSUM	(1 << 0)
329 #define XAE_FEATURE_PARTIAL_TX_CSUM	(1 << 1)
330 #define XAE_FEATURE_FULL_RX_CSUM	(1 << 2)
331 #define XAE_FEATURE_FULL_TX_CSUM	(1 << 3)
332 #define XAE_FEATURE_DMA_64BIT		(1 << 4)
333 
334 #define XAE_NO_CSUM_OFFLOAD		0
335 
336 #define XAE_FULL_CSUM_STATUS_MASK	0x00000038
337 #define XAE_IP_UDP_CSUM_VALIDATED	0x00000003
338 #define XAE_IP_TCP_CSUM_VALIDATED	0x00000002
339 
340 #define DELAY_OF_ONE_MILLISEC		1000
341 
342 /**
343  * struct axidma_bd - Axi Dma buffer descriptor layout
344  * @next:         MM2S/S2MM Next Descriptor Pointer
345  * @next_msb:     MM2S/S2MM Next Descriptor Pointer (high 32 bits)
346  * @phys:         MM2S/S2MM Buffer Address
347  * @phys_msb:     MM2S/S2MM Buffer Address (high 32 bits)
348  * @reserved3:    Reserved and not used
349  * @reserved4:    Reserved and not used
350  * @cntrl:        MM2S/S2MM Control value
351  * @status:       MM2S/S2MM Status value
352  * @app0:         MM2S/S2MM User Application Field 0.
353  * @app1:         MM2S/S2MM User Application Field 1.
354  * @app2:         MM2S/S2MM User Application Field 2.
355  * @app3:         MM2S/S2MM User Application Field 3.
356  * @app4:         MM2S/S2MM User Application Field 4.
357  */
358 struct axidma_bd {
359 	u32 next;	/* Physical address of next buffer descriptor */
360 	u32 next_msb;	/* high 32 bits for IP >= v7.1, reserved on older IP */
361 	u32 phys;
362 	u32 phys_msb;	/* for IP >= v7.1, reserved for older IP */
363 	u32 reserved3;
364 	u32 reserved4;
365 	u32 cntrl;
366 	u32 status;
367 	u32 app0;
368 	u32 app1;	/* TX start << 16 | insert */
369 	u32 app2;	/* TX csum seed */
370 	u32 app3;
371 	u32 app4;   /* Last field used by HW */
372 	struct sk_buff *skb;
373 } __aligned(XAXIDMA_BD_MINIMUM_ALIGNMENT);
374 
375 /**
376  * struct axienet_local - axienet private per device data
377  * @ndev:	Pointer for net_device to which it will be attached.
378  * @dev:	Pointer to device structure
379  * @phy_node:	Pointer to device node structure
380  * @mii_bus:	Pointer to MII bus structure
381  * @mii_clk_div: MII bus clock divider value
382  * @regs_start: Resource start for axienet device addresses
383  * @regs:	Base address for the axienet_local device address space
384  * @dma_regs:	Base address for the axidma device address space
385  * @dma_err_tasklet: Tasklet structure to process Axi DMA errors
386  * @tx_irq:	Axidma TX IRQ number
387  * @rx_irq:	Axidma RX IRQ number
388  * @phy_mode:	Phy type to identify between MII/GMII/RGMII/SGMII/1000 Base-X
389  * @options:	AxiEthernet option word
390  * @last_link:	Phy link state in which the PHY was negotiated earlier
391  * @features:	Stores the extended features supported by the axienet hw
392  * @tx_bd_v:	Virtual address of the TX buffer descriptor ring
393  * @tx_bd_p:	Physical address(start address) of the TX buffer descr. ring
394  * @rx_bd_v:	Virtual address of the RX buffer descriptor ring
395  * @rx_bd_p:	Physical address(start address) of the RX buffer descr. ring
396  * @tx_bd_ci:	Stores the index of the Tx buffer descriptor in the ring being
397  *		accessed currently. Used while alloc. BDs before a TX starts
398  * @tx_bd_tail:	Stores the index of the Tx buffer descriptor in the ring being
399  *		accessed currently. Used while processing BDs after the TX
400  *		completed.
401  * @rx_bd_ci:	Stores the index of the Rx buffer descriptor in the ring being
402  *		accessed currently.
403  * @max_frm_size: Stores the maximum size of the frame that can be that
404  *		  Txed/Rxed in the existing hardware. If jumbo option is
405  *		  supported, the maximum frame size would be 9k. Else it is
406  *		  1522 bytes (assuming support for basic VLAN)
407  * @rxmem:	Stores rx memory size for jumbo frame handling.
408  * @csum_offload_on_tx_path:	Stores the checksum selection on TX side.
409  * @csum_offload_on_rx_path:	Stores the checksum selection on RX side.
410  * @coalesce_count_rx:	Store the irq coalesce on RX side.
411  * @coalesce_count_tx:	Store the irq coalesce on TX side.
412  */
413 struct axienet_local {
414 	struct net_device *ndev;
415 	struct device *dev;
416 
417 	/* Connection to PHY device */
418 	struct device_node *phy_node;
419 
420 	struct phylink *phylink;
421 	struct phylink_config phylink_config;
422 
423 	/* Reference to PCS/PMA PHY if used */
424 	struct mdio_device *pcs_phy;
425 
426 	/* Clock for AXI bus */
427 	struct clk *clk;
428 
429 	/* MDIO bus data */
430 	struct mii_bus *mii_bus;	/* MII bus reference */
431 	u8 mii_clk_div; /* MII bus clock divider value */
432 
433 	/* IO registers, dma functions and IRQs */
434 	resource_size_t regs_start;
435 	void __iomem *regs;
436 	void __iomem *dma_regs;
437 
438 	struct work_struct dma_err_task;
439 
440 	int tx_irq;
441 	int rx_irq;
442 	int eth_irq;
443 	phy_interface_t phy_mode;
444 
445 	u32 options;			/* Current options word */
446 	u32 features;
447 
448 	/* Buffer descriptors */
449 	struct axidma_bd *tx_bd_v;
450 	dma_addr_t tx_bd_p;
451 	u32 tx_bd_num;
452 	struct axidma_bd *rx_bd_v;
453 	dma_addr_t rx_bd_p;
454 	u32 rx_bd_num;
455 	u32 tx_bd_ci;
456 	u32 tx_bd_tail;
457 	u32 rx_bd_ci;
458 
459 	u32 max_frm_size;
460 	u32 rxmem;
461 
462 	int csum_offload_on_tx_path;
463 	int csum_offload_on_rx_path;
464 
465 	u32 coalesce_count_rx;
466 	u32 coalesce_count_tx;
467 };
468 
469 /**
470  * struct axiethernet_option - Used to set axi ethernet hardware options
471  * @opt:	Option to be set.
472  * @reg:	Register offset to be written for setting the option
473  * @m_or:	Mask to be ORed for setting the option in the register
474  */
475 struct axienet_option {
476 	u32 opt;
477 	u32 reg;
478 	u32 m_or;
479 };
480 
481 /**
482  * axienet_ior - Memory mapped Axi Ethernet register read
483  * @lp:         Pointer to axienet local structure
484  * @offset:     Address offset from the base address of Axi Ethernet core
485  *
486  * Return: The contents of the Axi Ethernet register
487  *
488  * This function returns the contents of the corresponding register.
489  */
490 static inline u32 axienet_ior(struct axienet_local *lp, off_t offset)
491 {
492 	return ioread32(lp->regs + offset);
493 }
494 
495 static inline u32 axinet_ior_read_mcr(struct axienet_local *lp)
496 {
497 	return axienet_ior(lp, XAE_MDIO_MCR_OFFSET);
498 }
499 
500 /**
501  * axienet_iow - Memory mapped Axi Ethernet register write
502  * @lp:         Pointer to axienet local structure
503  * @offset:     Address offset from the base address of Axi Ethernet core
504  * @value:      Value to be written into the Axi Ethernet register
505  *
506  * This function writes the desired value into the corresponding Axi Ethernet
507  * register.
508  */
509 static inline void axienet_iow(struct axienet_local *lp, off_t offset,
510 			       u32 value)
511 {
512 	iowrite32(value, lp->regs + offset);
513 }
514 
515 /* Function prototypes visible in xilinx_axienet_mdio.c for other files */
516 int axienet_mdio_enable(struct axienet_local *lp);
517 void axienet_mdio_disable(struct axienet_local *lp);
518 int axienet_mdio_setup(struct axienet_local *lp);
519 void axienet_mdio_teardown(struct axienet_local *lp);
520 
521 #endif /* XILINX_AXI_ENET_H */
522