1 // SPDX-License-Identifier: GPL-2.0 2 /* 3 * MDIO bus driver for the Xilinx TEMAC device 4 * 5 * Copyright (c) 2009 Secret Lab Technologies, Ltd. 6 */ 7 8 #include <linux/io.h> 9 #include <linux/netdevice.h> 10 #include <linux/mutex.h> 11 #include <linux/phy.h> 12 #include <linux/of.h> 13 #include <linux/of_device.h> 14 #include <linux/of_address.h> 15 #include <linux/slab.h> 16 #include <linux/of_mdio.h> 17 #include <linux/platform_data/xilinx-ll-temac.h> 18 19 #include "ll_temac.h" 20 21 /* --------------------------------------------------------------------- 22 * MDIO Bus functions 23 */ 24 static int temac_mdio_read(struct mii_bus *bus, int phy_id, int reg) 25 { 26 struct temac_local *lp = bus->priv; 27 u32 rc; 28 unsigned long flags; 29 30 /* Write the PHY address to the MIIM Access Initiator register. 31 * When the transfer completes, the PHY register value will appear 32 * in the LSW0 register 33 */ 34 spin_lock_irqsave(lp->indirect_lock, flags); 35 temac_iow(lp, XTE_LSW0_OFFSET, (phy_id << 5) | reg); 36 rc = temac_indirect_in32_locked(lp, XTE_MIIMAI_OFFSET); 37 spin_unlock_irqrestore(lp->indirect_lock, flags); 38 39 dev_dbg(lp->dev, "temac_mdio_read(phy_id=%i, reg=%x) == %x\n", 40 phy_id, reg, rc); 41 42 return rc; 43 } 44 45 static int temac_mdio_write(struct mii_bus *bus, int phy_id, int reg, u16 val) 46 { 47 struct temac_local *lp = bus->priv; 48 unsigned long flags; 49 50 dev_dbg(lp->dev, "temac_mdio_write(phy_id=%i, reg=%x, val=%x)\n", 51 phy_id, reg, val); 52 53 /* First write the desired value into the write data register 54 * and then write the address into the access initiator register 55 */ 56 spin_lock_irqsave(lp->indirect_lock, flags); 57 temac_indirect_out32_locked(lp, XTE_MGTDR_OFFSET, val); 58 temac_indirect_out32_locked(lp, XTE_MIIMAI_OFFSET, (phy_id << 5) | reg); 59 spin_unlock_irqrestore(lp->indirect_lock, flags); 60 61 return 0; 62 } 63 64 int temac_mdio_setup(struct temac_local *lp, struct platform_device *pdev) 65 { 66 struct ll_temac_platform_data *pdata = dev_get_platdata(&pdev->dev); 67 struct device_node *np = dev_of_node(&pdev->dev); 68 struct mii_bus *bus; 69 u32 bus_hz; 70 int clk_div; 71 int rc; 72 struct resource res; 73 74 /* Get MDIO bus frequency (if specified) */ 75 bus_hz = 0; 76 if (np) 77 of_property_read_u32(np, "clock-frequency", &bus_hz); 78 else if (pdata) 79 bus_hz = pdata->mdio_clk_freq; 80 81 /* Calculate a reasonable divisor for the clock rate */ 82 clk_div = 0x3f; /* worst-case default setting */ 83 if (bus_hz != 0) { 84 clk_div = bus_hz / (2500 * 1000 * 2) - 1; 85 if (clk_div < 1) 86 clk_div = 1; 87 if (clk_div > 0x3f) 88 clk_div = 0x3f; 89 } 90 91 /* Enable the MDIO bus by asserting the enable bit and writing 92 * in the clock config 93 */ 94 temac_indirect_out32(lp, XTE_MC_OFFSET, 1 << 6 | clk_div); 95 96 bus = devm_mdiobus_alloc(&pdev->dev); 97 if (!bus) 98 return -ENOMEM; 99 100 if (np) { 101 of_address_to_resource(np, 0, &res); 102 snprintf(bus->id, MII_BUS_ID_SIZE, "%.8llx", 103 (unsigned long long)res.start); 104 } else if (pdata) { 105 snprintf(bus->id, MII_BUS_ID_SIZE, "%.8llx", 106 pdata->mdio_bus_id); 107 } 108 109 bus->priv = lp; 110 bus->name = "Xilinx TEMAC MDIO"; 111 bus->read = temac_mdio_read; 112 bus->write = temac_mdio_write; 113 bus->parent = lp->dev; 114 115 lp->mii_bus = bus; 116 117 rc = of_mdiobus_register(bus, np); 118 if (rc) 119 return rc; 120 121 dev_dbg(lp->dev, "MDIO bus registered; MC:%x\n", 122 temac_indirect_in32(lp, XTE_MC_OFFSET)); 123 return 0; 124 } 125 126 void temac_mdio_teardown(struct temac_local *lp) 127 { 128 mdiobus_unregister(lp->mii_bus); 129 } 130