1 2 #ifndef XILINX_LL_TEMAC_H 3 #define XILINX_LL_TEMAC_H 4 5 #include <linux/netdevice.h> 6 #include <linux/of.h> 7 #include <linux/spinlock.h> 8 9 #ifdef CONFIG_PPC_DCR 10 #include <asm/dcr.h> 11 #include <asm/dcr-regs.h> 12 #endif 13 14 /* packet size info */ 15 #define XTE_HDR_SIZE 14 /* size of Ethernet header */ 16 #define XTE_TRL_SIZE 4 /* size of Ethernet trailer (FCS) */ 17 #define XTE_JUMBO_MTU 9000 18 #define XTE_MAX_JUMBO_FRAME_SIZE (XTE_JUMBO_MTU + XTE_HDR_SIZE + XTE_TRL_SIZE) 19 20 /* Configuration options */ 21 22 /* Accept all incoming packets. 23 * This option defaults to disabled (cleared) */ 24 #define XTE_OPTION_PROMISC (1 << 0) 25 /* Jumbo frame support for Tx & Rx. 26 * This option defaults to disabled (cleared) */ 27 #define XTE_OPTION_JUMBO (1 << 1) 28 /* VLAN Rx & Tx frame support. 29 * This option defaults to disabled (cleared) */ 30 #define XTE_OPTION_VLAN (1 << 2) 31 /* Enable recognition of flow control frames on Rx 32 * This option defaults to enabled (set) */ 33 #define XTE_OPTION_FLOW_CONTROL (1 << 4) 34 /* Strip FCS and PAD from incoming frames. 35 * Note: PAD from VLAN frames is not stripped. 36 * This option defaults to disabled (set) */ 37 #define XTE_OPTION_FCS_STRIP (1 << 5) 38 /* Generate FCS field and add PAD automatically for outgoing frames. 39 * This option defaults to enabled (set) */ 40 #define XTE_OPTION_FCS_INSERT (1 << 6) 41 /* Enable Length/Type error checking for incoming frames. When this option is 42 set, the MAC will filter frames that have a mismatched type/length field 43 and if XTE_OPTION_REPORT_RXERR is set, the user is notified when these 44 types of frames are encountered. When this option is cleared, the MAC will 45 allow these types of frames to be received. 46 This option defaults to enabled (set) */ 47 #define XTE_OPTION_LENTYPE_ERR (1 << 7) 48 /* Enable the transmitter. 49 * This option defaults to enabled (set) */ 50 #define XTE_OPTION_TXEN (1 << 11) 51 /* Enable the receiver 52 * This option defaults to enabled (set) */ 53 #define XTE_OPTION_RXEN (1 << 12) 54 55 /* Default options set when device is initialized or reset */ 56 #define XTE_OPTION_DEFAULTS \ 57 (XTE_OPTION_TXEN | \ 58 XTE_OPTION_FLOW_CONTROL | \ 59 XTE_OPTION_RXEN) 60 61 /* XPS_LL_TEMAC SDMA registers definition */ 62 63 #define TX_NXTDESC_PTR 0x00 /* r */ 64 #define TX_CURBUF_ADDR 0x01 /* r */ 65 #define TX_CURBUF_LENGTH 0x02 /* r */ 66 #define TX_CURDESC_PTR 0x03 /* rw */ 67 #define TX_TAILDESC_PTR 0x04 /* rw */ 68 #define TX_CHNL_CTRL 0x05 /* rw */ 69 /* 70 0:7 24:31 IRQTimeout 71 8:15 16:23 IRQCount 72 16:20 11:15 Reserved 73 21 10 0 74 22 9 UseIntOnEnd 75 23 8 LdIRQCnt 76 24 7 IRQEn 77 25:28 3:6 Reserved 78 29 2 IrqErrEn 79 30 1 IrqDlyEn 80 31 0 IrqCoalEn 81 */ 82 #define CHNL_CTRL_IRQ_IOE (1 << 9) 83 #define CHNL_CTRL_IRQ_EN (1 << 7) 84 #define CHNL_CTRL_IRQ_ERR_EN (1 << 2) 85 #define CHNL_CTRL_IRQ_DLY_EN (1 << 1) 86 #define CHNL_CTRL_IRQ_COAL_EN (1 << 0) 87 #define TX_IRQ_REG 0x06 /* rw */ 88 /* 89 0:7 24:31 DltTmrValue 90 8:15 16:23 ClscCntrValue 91 16:17 14:15 Reserved 92 18:21 10:13 ClscCnt 93 22:23 8:9 DlyCnt 94 24:28 3::7 Reserved 95 29 2 ErrIrq 96 30 1 DlyIrq 97 31 0 CoalIrq 98 */ 99 #define TX_CHNL_STS 0x07 /* r */ 100 /* 101 0:9 22:31 Reserved 102 10 21 TailPErr 103 11 20 CmpErr 104 12 19 AddrErr 105 13 18 NxtPErr 106 14 17 CurPErr 107 15 16 BsyWr 108 16:23 8:15 Reserved 109 24 7 Error 110 25 6 IOE 111 26 5 SOE 112 27 4 Cmplt 113 28 3 SOP 114 29 2 EOP 115 30 1 EngBusy 116 31 0 Reserved 117 */ 118 119 #define RX_NXTDESC_PTR 0x08 /* r */ 120 #define RX_CURBUF_ADDR 0x09 /* r */ 121 #define RX_CURBUF_LENGTH 0x0a /* r */ 122 #define RX_CURDESC_PTR 0x0b /* rw */ 123 #define RX_TAILDESC_PTR 0x0c /* rw */ 124 #define RX_CHNL_CTRL 0x0d /* rw */ 125 /* 126 0:7 24:31 IRQTimeout 127 8:15 16:23 IRQCount 128 16:20 11:15 Reserved 129 21 10 0 130 22 9 UseIntOnEnd 131 23 8 LdIRQCnt 132 24 7 IRQEn 133 25:28 3:6 Reserved 134 29 2 IrqErrEn 135 30 1 IrqDlyEn 136 31 0 IrqCoalEn 137 */ 138 #define RX_IRQ_REG 0x0e /* rw */ 139 #define IRQ_COAL (1 << 0) 140 #define IRQ_DLY (1 << 1) 141 #define IRQ_ERR (1 << 2) 142 #define IRQ_DMAERR (1 << 7) /* this is not documented ??? */ 143 /* 144 0:7 24:31 DltTmrValue 145 8:15 16:23 ClscCntrValue 146 16:17 14:15 Reserved 147 18:21 10:13 ClscCnt 148 22:23 8:9 DlyCnt 149 24:28 3::7 Reserved 150 */ 151 #define RX_CHNL_STS 0x0f /* r */ 152 #define CHNL_STS_ENGBUSY (1 << 1) 153 #define CHNL_STS_EOP (1 << 2) 154 #define CHNL_STS_SOP (1 << 3) 155 #define CHNL_STS_CMPLT (1 << 4) 156 #define CHNL_STS_SOE (1 << 5) 157 #define CHNL_STS_IOE (1 << 6) 158 #define CHNL_STS_ERR (1 << 7) 159 160 #define CHNL_STS_BSYWR (1 << 16) 161 #define CHNL_STS_CURPERR (1 << 17) 162 #define CHNL_STS_NXTPERR (1 << 18) 163 #define CHNL_STS_ADDRERR (1 << 19) 164 #define CHNL_STS_CMPERR (1 << 20) 165 #define CHNL_STS_TAILERR (1 << 21) 166 /* 167 0:9 22:31 Reserved 168 10 21 TailPErr 169 11 20 CmpErr 170 12 19 AddrErr 171 13 18 NxtPErr 172 14 17 CurPErr 173 15 16 BsyWr 174 16:23 8:15 Reserved 175 24 7 Error 176 25 6 IOE 177 26 5 SOE 178 27 4 Cmplt 179 28 3 SOP 180 29 2 EOP 181 30 1 EngBusy 182 31 0 Reserved 183 */ 184 185 #define DMA_CONTROL_REG 0x10 /* rw */ 186 #define DMA_CONTROL_RST (1 << 0) 187 #define DMA_TAIL_ENABLE (1 << 2) 188 189 /* XPS_LL_TEMAC direct registers definition */ 190 191 #define XTE_RAF0_OFFSET 0x00 192 #define RAF0_RST (1 << 0) 193 #define RAF0_MCSTREJ (1 << 1) 194 #define RAF0_BCSTREJ (1 << 2) 195 #define XTE_TPF0_OFFSET 0x04 196 #define XTE_IFGP0_OFFSET 0x08 197 #define XTE_ISR0_OFFSET 0x0c 198 #define ISR0_HARDACSCMPLT (1 << 0) 199 #define ISR0_AUTONEG (1 << 1) 200 #define ISR0_RXCMPLT (1 << 2) 201 #define ISR0_RXREJ (1 << 3) 202 #define ISR0_RXFIFOOVR (1 << 4) 203 #define ISR0_TXCMPLT (1 << 5) 204 #define ISR0_RXDCMLCK (1 << 6) 205 206 #define XTE_IPR0_OFFSET 0x10 207 #define XTE_IER0_OFFSET 0x14 208 209 #define XTE_MSW0_OFFSET 0x20 210 #define XTE_LSW0_OFFSET 0x24 211 #define XTE_CTL0_OFFSET 0x28 212 #define XTE_RDY0_OFFSET 0x2c 213 214 #define XTE_RSE_MIIM_RR_MASK 0x0002 215 #define XTE_RSE_MIIM_WR_MASK 0x0004 216 #define XTE_RSE_CFG_RR_MASK 0x0020 217 #define XTE_RSE_CFG_WR_MASK 0x0040 218 #define XTE_RDY0_HARD_ACS_RDY_MASK (0x10000) 219 220 /* XPS_LL_TEMAC indirect registers offset definition */ 221 222 #define XTE_RXC0_OFFSET 0x00000200 /* Rx configuration word 0 */ 223 #define XTE_RXC1_OFFSET 0x00000240 /* Rx configuration word 1 */ 224 #define XTE_RXC1_RXRST_MASK (1 << 31) /* Receiver reset */ 225 #define XTE_RXC1_RXJMBO_MASK (1 << 30) /* Jumbo frame enable */ 226 #define XTE_RXC1_RXFCS_MASK (1 << 29) /* FCS not stripped */ 227 #define XTE_RXC1_RXEN_MASK (1 << 28) /* Receiver enable */ 228 #define XTE_RXC1_RXVLAN_MASK (1 << 27) /* VLAN enable */ 229 #define XTE_RXC1_RXHD_MASK (1 << 26) /* Half duplex */ 230 #define XTE_RXC1_RXLT_MASK (1 << 25) /* Length/type check disable */ 231 232 #define XTE_TXC_OFFSET 0x00000280 /* Tx configuration */ 233 #define XTE_TXC_TXRST_MASK (1 << 31) /* Transmitter reset */ 234 #define XTE_TXC_TXJMBO_MASK (1 << 30) /* Jumbo frame enable */ 235 #define XTE_TXC_TXFCS_MASK (1 << 29) /* Generate FCS */ 236 #define XTE_TXC_TXEN_MASK (1 << 28) /* Transmitter enable */ 237 #define XTE_TXC_TXVLAN_MASK (1 << 27) /* VLAN enable */ 238 #define XTE_TXC_TXHD_MASK (1 << 26) /* Half duplex */ 239 240 #define XTE_FCC_OFFSET 0x000002C0 /* Flow control config */ 241 #define XTE_FCC_RXFLO_MASK (1 << 29) /* Rx flow control enable */ 242 #define XTE_FCC_TXFLO_MASK (1 << 30) /* Tx flow control enable */ 243 244 #define XTE_EMCFG_OFFSET 0x00000300 /* EMAC configuration */ 245 #define XTE_EMCFG_LINKSPD_MASK 0xC0000000 /* Link speed */ 246 #define XTE_EMCFG_HOSTEN_MASK (1 << 26) /* Host interface enable */ 247 #define XTE_EMCFG_LINKSPD_10 0x00000000 /* 10 Mbit LINKSPD_MASK */ 248 #define XTE_EMCFG_LINKSPD_100 (1 << 30) /* 100 Mbit LINKSPD_MASK */ 249 #define XTE_EMCFG_LINKSPD_1000 (1 << 31) /* 1000 Mbit LINKSPD_MASK */ 250 251 #define XTE_GMIC_OFFSET 0x00000320 /* RGMII/SGMII config */ 252 #define XTE_MC_OFFSET 0x00000340 /* MDIO configuration */ 253 #define XTE_UAW0_OFFSET 0x00000380 /* Unicast address word 0 */ 254 #define XTE_UAW1_OFFSET 0x00000384 /* Unicast address word 1 */ 255 256 #define XTE_MAW0_OFFSET 0x00000388 /* Multicast addr word 0 */ 257 #define XTE_MAW1_OFFSET 0x0000038C /* Multicast addr word 1 */ 258 #define XTE_AFM_OFFSET 0x00000390 /* Promiscuous mode */ 259 #define XTE_AFM_EPPRM_MASK (1 << 31) /* Promiscuous mode enable */ 260 261 /* Interrupt Request status */ 262 #define XTE_TIS_OFFSET 0x000003A0 263 #define TIS_FRIS (1 << 0) 264 #define TIS_MRIS (1 << 1) 265 #define TIS_MWIS (1 << 2) 266 #define TIS_ARIS (1 << 3) 267 #define TIS_AWIS (1 << 4) 268 #define TIS_CRIS (1 << 5) 269 #define TIS_CWIS (1 << 6) 270 271 #define XTE_TIE_OFFSET 0x000003A4 /* Interrupt enable */ 272 273 /** MII Mamagement Control register (MGTCR) */ 274 #define XTE_MGTDR_OFFSET 0x000003B0 /* MII data */ 275 #define XTE_MIIMAI_OFFSET 0x000003B4 /* MII control */ 276 277 #define CNTLREG_WRITE_ENABLE_MASK 0x8000 278 #define CNTLREG_EMAC1SEL_MASK 0x0400 279 #define CNTLREG_ADDRESSCODE_MASK 0x03ff 280 281 /* CDMAC descriptor status bit definitions */ 282 283 #define STS_CTRL_APP0_ERR (1 << 31) 284 #define STS_CTRL_APP0_IRQONEND (1 << 30) 285 /* undoccumented */ 286 #define STS_CTRL_APP0_STOPONEND (1 << 29) 287 #define STS_CTRL_APP0_CMPLT (1 << 28) 288 #define STS_CTRL_APP0_SOP (1 << 27) 289 #define STS_CTRL_APP0_EOP (1 << 26) 290 #define STS_CTRL_APP0_ENGBUSY (1 << 25) 291 /* undocumented */ 292 #define STS_CTRL_APP0_ENGRST (1 << 24) 293 294 #define TX_CONTROL_CALC_CSUM_MASK 1 295 296 #define MULTICAST_CAM_TABLE_NUM 4 297 298 /* TEMAC Synthesis features */ 299 #define TEMAC_FEATURE_RX_CSUM (1 << 0) 300 #define TEMAC_FEATURE_TX_CSUM (1 << 1) 301 302 /* TX/RX CURDESC_PTR points to first descriptor */ 303 /* TX/RX TAILDESC_PTR points to last descriptor in linked list */ 304 305 /** 306 * struct cdmac_bd - LocalLink buffer descriptor format 307 * 308 * app0 bits: 309 * 0 Error 310 * 1 IrqOnEnd generate an interrupt at completion of DMA op 311 * 2 reserved 312 * 3 completed Current descriptor completed 313 * 4 SOP TX - marks first desc/ RX marks first desct 314 * 5 EOP TX marks last desc/RX marks last desc 315 * 6 EngBusy DMA is processing 316 * 7 reserved 317 * 8:31 application specific 318 */ 319 struct cdmac_bd { 320 u32 next; /* Physical address of next buffer descriptor */ 321 u32 phys; 322 u32 len; 323 u32 app0; 324 u32 app1; /* TX start << 16 | insert */ 325 u32 app2; /* TX csum */ 326 u32 app3; 327 u32 app4; /* skb for TX length for RX */ 328 }; 329 330 struct temac_local { 331 struct net_device *ndev; 332 struct device *dev; 333 334 /* Connection to PHY device */ 335 struct device_node *phy_node; 336 337 /* MDIO bus data */ 338 struct mii_bus *mii_bus; /* MII bus reference */ 339 340 /* IO registers, dma functions and IRQs */ 341 void __iomem *regs; 342 void __iomem *sdma_regs; 343 #ifdef CONFIG_PPC_DCR 344 dcr_host_t sdma_dcrs; 345 #endif 346 u32 (*dma_in)(struct temac_local *, int); 347 void (*dma_out)(struct temac_local *, int, u32); 348 349 int tx_irq; 350 int rx_irq; 351 int emac_num; 352 353 struct sk_buff **rx_skb; 354 spinlock_t rx_lock; 355 struct mutex indirect_mutex; 356 u32 options; /* Current options word */ 357 int last_link; 358 unsigned int temac_features; 359 360 /* Buffer descriptors */ 361 struct cdmac_bd *tx_bd_v; 362 dma_addr_t tx_bd_p; 363 struct cdmac_bd *rx_bd_v; 364 dma_addr_t rx_bd_p; 365 int tx_bd_ci; 366 int tx_bd_next; 367 int tx_bd_tail; 368 int rx_bd_ci; 369 }; 370 371 /* xilinx_temac.c */ 372 u32 temac_ior(struct temac_local *lp, int offset); 373 void temac_iow(struct temac_local *lp, int offset, u32 value); 374 int temac_indirect_busywait(struct temac_local *lp); 375 u32 temac_indirect_in32(struct temac_local *lp, int reg); 376 void temac_indirect_out32(struct temac_local *lp, int reg, u32 value); 377 378 379 /* xilinx_temac_mdio.c */ 380 int temac_mdio_setup(struct temac_local *lp, struct device_node *np); 381 void temac_mdio_teardown(struct temac_local *lp); 382 383 #endif /* XILINX_LL_TEMAC_H */ 384